Beruflich Dokumente
Kultur Dokumente
www.starwindsoftware.com
Copyright StarWind Software 2008-2011. All rights reserved.
StarWind Software
Technical Reference Series
COPYRIGHT
Copyright StarWind Software 2008-2011. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior written consent of StarWind Software.
TRADEMARKS
StarWind, StarWind Software and the StarWind and the StarWind Software logos
are trademarks of StarWind Software which may be registered in some jurisdictions.
All other trademarks are owned by their respective owners.
CHANGES
The material in this document is for information only and is subject to change without
notice. While reasonable efforts have been made in the preparation of this document
to assure its accuracy, StarWind Software assumes no liability resulting from errors or
omissions in this document, or from the use of the information contained herein.
StarWind Software reserves the right to make changes in the product design without
reservation and without notification to its users.
StarWind Software
Technical Reference Series
Table of Contents
Getting Started
.......................................................................................................
with StarWind
4
Downloading
.......................................................................................................
and installing
5
Registering.......................................................................................................
the Software
13
Creating a.......................................................................................................
device
20
StarWind Software
Technical Reference Series
Guide
Getting Started with StarWind
This guide is intended for experienced Windows system administrators who
will be installing the StarWind iSCSI SAN software in their IT infrastructure.
StarWind can be used as shared storage for almost any application, it is fully
compatible for use with VMware, Hyper-V or Server Clusters for applications
as SQL Server, Exchange and SharePoint.
StarWind Software
Technical Reference Series
StarWind Software
Technical Reference Series
StarWind Software
Technical Reference Series
StarWind Software
Technical Reference Series
StarWind Software
Technical Reference Series
StarWind Software
Technical Reference Series
10
StarWind Software
Technical Reference Series
Review the settings you have specified during the installation setup, click the
Back button if you need to apply any changes.
11
StarWind Software
Technical Reference Series
After the installation process is complete, you will see a window confirming
that you have successfully installed StarWind iSCSI SAN. Tick the checkbox if
you want to run StarWind Management Console immediately.
12
StarWind Software
Technical Reference Series
13
StarWind Software
Technical Reference Series
button.
14
StarWind Software
Technical Reference Series
15
StarWind Software
Technical Reference Series
Now the server is listed in the servers section of the StarWind Management
Console.
Click the
16
StarWind Software
Technical Reference Series
17
StarWind Software
Technical Reference Series
Now, when you are connected to the StarWind service on the server you have
to go through registration procedure: select the server you have connected to
and go to the Configuration tab. Click the Registration link. You will see the
information about the license installed on this server.
18
StarWind Software
Technical Reference Series
Load your license from file by clicking the Load button and selecting the license
file you have received.
19
StarWind Software
Technical Reference Series
Creating a device
Select the server where you wish to create a new virtual device.
Click the
button.
20
StarWind Software
Technical Reference Series
An Add Target Wizard window will appear. Follow the instructions on the top
of the window.
Note target alias can contain only letters from A to Z,numbers, points, : and
can not contain spaces.
21
StarWind Software
Technical Reference Series
Select Image file device by going to Hard Disk > Basic Virtual > Image File
device. Select Create new virtual disk.
22
StarWind Software
Technical Reference Series
Specify the path where virtual disk should be created by clicking the ...
button. Additional device parameters are described in the Help section.
23
StarWind Software
Technical Reference Series
On this step you can set additional parameters for your virtual disk.
Refer to the Help section to get detailed information.
24
StarWind Software
Technical Reference Series
25
StarWind Software
Technical Reference Series
You will see a summary of the options you have set while creating the virtual
disk. Click Back button if need to apply any changes.
26
StarWind Software
Technical Reference Series
The Wizard informs that the new virtual disk has been successfully created.
27
StarWind Software
Technical Reference Series
Contacts
Support:
www.starwindsoftware.com/support
Support Forum:
www.starwindsoftware.com/forums
Sales E-mail:
sales@starwindsoftware.com
US Headquarters
Direct phone number:
1-617-449-7717
Fax:
1-617-507-5845
EMEA, APAC
Direct phone numbers:
+44-0-2071936727
+44-0-2071936350
Voice Mail:
1-866-790-2646
28