Beruflich Dokumente
Kultur Dokumente
Hi, Alejandro
Log Out
Products
About SCN
Downloads
Industries
Partnership
Developer Center
Lines of Business
University Alliances
Innovation
Store
1 points
2
Activity
Brow se
Communications
Actions
Create
Version 2
created by Ramakrishna N on May 21, 2013 2:26 PM, last modified by Ramakrishna N on Jul 12, 2013 7:40 PM
Share
Tw eet
1. 1. Perform mandatory
Your
c. Assign process key by tcode BF11 --> set the flag as active for application components
1. 2.There
load data from ODS to IC. Detail level of analysis is not possible in SNAPSHOT method.
c. Inventory Controlling Datasources for data extracting into 0IC_C03,
2LIS_03_BX -->Stock Initialization/Material stocks [Maintains Non-Cumulative KFs]
2LIS_03_BF--> Goods Movements [Maintains Cumulative KFs]
2LIS_03_UM-->Revaluations [This is accomplished by creating a price change
document, without physically moving the goods]
Important tables for IC (Inventory Controlling)
MSEG --> Material Segments
BSEG --> Accounting Segments
MARA -->Material Master
MAKT --> Material text
MARC -->Plant Data for Materialetc
2. 3.Install the Business Content,
a.Go to tcode RSA5 --> Expand SAP R/3 --> MM --> 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM -->
Select Activate DS option
b.RSA6
to check the Datasources entries in the Metadata repository for maintains Use
selection, Hide field.
Note: Delta update doesnt support for 2LIS_03_BX
Delta update supports for 2LIS_03_BF and 2LIS_03_UM
c.Check data in the Datasources using extractor checker -->in RSA3
It should shows 0 records for 3 datasources because setup tables are not yet filled.
1. 4. Log on to BI --> check for the R/3 source system --> Replicate the Datasources -->Activate the
2.
Datasources if they are not active. (For BX check the Opening balance under General Info. Tab)
Install and activate the required InfoCube is 0IC_C03
a. Perform pre-installation steps,
i. Maintain the source system assignment
ii. Maintain the required grouping
iii.Maintain the required collection mode
b.Select 0IC_C03 Cube from Business Content tab Drag & Drop into collected objects.
c.Perform post-installation steps,
i. Select Install
ii. Select Match or Copy
iii. Select activate and Install-->Install in background
Note: If the installation process fails, repeat the process till all objects are
successfully installed.
d.Check for the installation of the cube-->Select Modeling -->InfoProviders-->Refresh->Find-->0IC_C03-->you can find the Material stocks/Movements: 0IC_C03
e. Cube holds following Non-cumulative Key figures,
1.0VALSTCKVAL --> Value of Valuated Stock,
Inflow: 0RECVS_VAL--> Value received into Valuated Stock.
Outflow: 0ISSVS_VAL --> Value issued into Valuated Stock.
2.0QMSTOCK --> Stock in Quality Inspection,
Inflow:
0RECQMSTCK--> Receipt Quantity: Stock in Quality Inspection.
Outflow: 0ISSQMSTCK --> Issued Quantity: Stock in Quality Inspection.
3. 0BLOCKSTK --> Blocked Stock
Inflow: 0RECBLOSTCK--> Receipt Quantity: Blocked Stock
Outflow: 0ISSBLOSTCK --> Issued Quantity: Blocked Stock
4. 0CNSSTCKQTY --> Quantity of consignment stock
Inflow: 0RECNSSTCK--> Quantity received into Consignment stock
Outflow: 0ISSCNSSTCK-->Quantity Issued from Consignment stock
5. 0TRANSSTOCK --> Stock in Transit
Inflow:
Stock Initialization
a. Stock Initialization-->Stock Initialization is basically done to set an entry into the
system which leads to the opening stock. Initialize stock using transaction MCNB for
2LIS_03_BX Or you can also find the Initialization of the Opening stock in
transaction SBIW
It gives now initialization run screen where you can restrict by plant, material and storage
location as shown below.
Note: Termination date is in the future.
1. 6. Fill
Devices.
1.
Fill setup tables for 2LIS_03_UM --> tcode OLIZBW.You will be asked for the Back Ground Job
Print parameters and give LOCAL as the Output Devices.
7. From BW,
1.
Pull the data for 2LI_03_BX -->its a onetime activity and needs to be done carefully. In the
InfoPackage, choose the upload mode Generate Initial Status
Note: In the InfoCube (0IC_C03), release request with Marker update (No Tick). Marker update is
just like check point--> it will give the snapshot of the stock on a particular date when it was
updated. Marker Update is a special feature available only for Non-cumulative InfoCubes. As we
are using Noncumulative key figure it will take lot of time to calculate the current stock for
example at report time. To overcome this we use Marker update.
1. 8. Pull
the data for 2LI_03_BF --> Init Delta without data transfer.
Note:The Marker has no importance for this request since no data was transferred. Perform full
load. Release the request with No Marker Update Tick. If you choose No Marker Update and
compress the reference point is not updated but the requests are moved to zero (Means request
no. will become 0). Then successive Delta loads must always be compressed with No Marker
Update Tick.
1.
9. Pull the data for 2LI_03_UM --> Init Delta without data transfer.
Note:The Marker ha s no importance for this request since no data was transferred.Perform full
load. Release the request with No Marker Update Tick.and successive Delta loads must always be
compressed with No Marker Update Tick.
Job scheduling to fill the delta queue,Tcode --> LBWE -->Job control --> Schedule the job.
Schedule the delta update in process chain for both the datasources: 2LIS_03_BF and 2LIS_03_UM.
10. Some important Reports Details,
Stock Ledger report
Valuated stock report
Blocked stock reportetc
Thanks,
RK --> CTS
3911 View s
My Rating:
Share
Tw eet
12 Comments
Anshu Lilhori May 22, 2013 7:12 AM
Hi,
Superb Document with all the steps.Great!
Like
(0)
Hi Ram,
its great article and thanks for sharing.
Like
(0)
Very good document, providing a lot of useful info in one place. Thank you!
Like
(0)
Great doc.
Thanks for sharing..
Regards,
Poorna
Like
(0)
Hi Ramakrishna,
Superb Document. I got many clarifications regarding Marker Updates from this document.
Really thankful to you
Thanks,
Purushotham.
Like
(0)
Nice Document
Like
(0)
Nice.
Like
(0)
Mehmet Ozgur Unal Jul 12, 2014 8:14 AM (in response to Giri Prasad)
Site Index
Privacy
Contact Us
Terms of Use
Copyright
Follow SCN