Beruflich Dokumente
Kultur Dokumente
With what are SIMATIC WinCC V7.x, V 6.x and V5.x compatible?
WinCC Version
Software
Microsoft Windows
(32-Bit) *11)
Virus Scanner
Remote Software
OPC
V6.0
V6.0 SP1
V6.0 SP2
V6.0 SP3
V6.0 SP4
Client /
Client /
Client /
Client /
Client /
Server
Server
Server
Server
Server
Singlestation
Singlestation
Singlestation
Singlestation
Singlestation
2000 Professional SP2
x
x
2000 Professional SP3
x
x
x
x
2000 Professional SP4 (KB828741)
x
x
x
2000 Server SP2
x
x
x
x
2000 Server SP3
x
x
x
x
x
x
x
x
2000 Server SP4 (KB828741)
x
x
x
x
x
x
2000 Advanced Server SP2
x
x
x
x
2000 Advanced Server SP3
x
x
x
x
x
x
x
x
2000 Advanced Server SP4 (KB828741)
x
x
x
x
x
x
XP Professional
x
x
XP Professional SP1a
x
x
x
x
x
*13)
XP Professional SP2 (KB319740)
x
x
*8)
x
x
x
x
x
x
Server 2003
*8)
x
x
Server 2003 SP1
V6.0 SP1
*9)
WinCC/Audit
WinCC/Connectivity Pack
WinCC/DataMonitor
WinCC/Industrial
DataBridge
WinCC/IndustrialX
x *7)
x
x
x
x
x *7)
x *15)
x *15)
x
x
x *15)
x *15)
x
x
x *15)
x *15)
x
x
x
x *15)
x *15)
*15)
*15)
*15)
x
x
*15)
x
x
*15)
*15)
x
x
*15)
x
x
x *15)
x *15)
x
x
*15)
x
x
*15)
x
x
*15)
*6)
x
x
(V6.0)
(V6.1)
(V6.1)
(V6.2)
(V6.2)
(V6.3)
(V6.3)
*18)
x
x *6)
x
x
x
x
x
x
x
V5.2
V5.2 SP1
V5.3
V5.3 SP1
V5.3 SP2
V5.3 SP3
V5.4
V5.4 SP1
V5.4 SP2
V5.4 SP3
STEP 7 *10)
SIMATIC NET
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x *1)
*2, 5)
x
x *3, 5)
x *5)
V6.0
V6.0 SP1
V6.0 SP2
V6.0
V6.0 SP1
V6.1
V6.1 SP1
V6.0
V6.0 SP1
V6.1
V6.1 SP1
V6.0
V6.0 SP1
V6.1
V1.1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Changedate: 29.04.2013
Page: 1/2
Entry-ID: 21927773
With what are SIMATIC WinCC V7.x, V 6.x and V5.x compatible?
WinCC Version
Software
V6.0
V6.0 SP4
WinCC/ODK
WinCC/ProAgent
*14)
V6.0
V6.0 SP1
V6.0 SP2
V6.0 SP3
V6.0 SP4
WinCC/Redundancy
V6.0
V6.0 SP1
V6.0 SP2
V6.0 SP3
V6.0 SP4
WinCC/Server
V6.0
V6.0 SP1
V6.0 SP2
V6.0 SP3
V6.0 SP4
WinCC/User Archives
V6.0
V6.0 SP1
V6.0 SP2
V6.0 SP3
V6.0 SP4
WinCC/Web Navigator
V6.0
V6.0 SP1
V6.1
V6.1 SP1
Simatic Logon
V1.1
V1.2
V1.2 SP1
V1.3
V1.4
V1.4 SP1
V1.4 SP2
V1.4 SP3
WinBDE
V7.2
V7.2 SP1
V7.2 SP2
*1) The module CP1613 A2 may be used with WinCC6.0+SP2 and the delivered SIMATIC NET V6.2. In this case you should use the driver for S7-TCP/IP, which is delivered with the module
CP1613 A2.
*2) WinCC V6.0+SP3 was delivered with SIMATIC NET V6.2+SP1 until the end of may 2005.
*3) WinCC V6.0+SP3 is delivered with SIMATIC NET 2005 since june 2005.
*4) at WinCC V6.0 SP3 + HF1
*5) WinCC is delivered with SIMATIC NET Softnet-S7 Lean
*6)
It is not absolutely necessary to have WinCC installed. In this case you cannot read/write data from/to WinCC. But it is a requirement to install MS Excel 2000 / XP /2003.
*7) When you install pcAnywhere in English on Windows Server 2003 Standard Edition, warnings are displayed. According to Symantec releases, Symantec does not provide support for
pcAnywhere V10.5 operated on Windows Server 2003 Server Standard Edition.
*8) Standard und Enterprise Edition
*9) Notice operating system, entry 9859007
*10) Notice operating system, entry 8250891
*11) All WinCC Clients of a project must be installed with the same version of the operating system (inclusive SP).
Remark: Dont use an older Windows Server version on the WinCC Client as at the WinCC Server
*12) OPC HDA, OPC A&E and OPC XML DA is not possible in WinCC Demo mode. You need a WinCC ConnectivityPack license.
*13) Only released for WinCC Clients
*14) Only released for WinCC Singlestation.
*15) Installation of WinCC OPC Server is only released on WinCC client with own project.
*16) OPC DA is possible in WinCC Demo mode
*17) Find more informations concerning "RealVNC" for WinCC in entry-ID 55422236.
*18) Installation of WinCC V6.0 SP3a HF32 is necessary for using "RealVNC" Enterprise Edition V4.6.
Changedate: 29.04.2013
Page: 2/2