Beruflich Dokumente
Kultur Dokumente
User Guide
Mobi 360
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate
the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
turningtechnologies.com/user-guides
Mobi 360
TABLE OF CONTENTS
About Mobi 360
Technical Requirements
Mobi 360 Setup
Pairing the Mobi 360 with the Receiver
Calibrating the Mobi 360 Touchscreen
Changing the Language
Adjusting the Brightness
Calibrating the DualBoard
Updating Firmware
Mobi 360 Zones
Starting a Class
Starting a Class Session
Changing a Class
Starting an Anonymous Class Session
Accessing Favorites
Care and Maintenance
Replacing and Charging the Mobi 360 Battery
Charging the Mobi 360 Pen Battery
Replacing the Mobi 360 Pen Battery
Lesson Zone
Display Options
Displaying the Computer Screen from the Mobi 360
Displaying Whiteboard Mode from the Mobi 360
Using the Curtain to Hide the Screen
The Digital Pen
Using the Pen as a Mouse Pointer
Using the Pen as a Pen
Using the Pen as a Highlighter
Using the Pen to Draw Shapes
Using the Pen to Draw Straight Lines
Using the Pen as an Eraser
Using the Pen as a Keyboard
Multi-User Mode
Entering Multi-User Mode
Locking or Hiding the Screen in Multi-User Mode
Exiting Multi-User Mode
Annotating the Screen
Annotation Icons
Hiding Annotations
Deleting Annotations
Notes
Note Icons
Creating and Displaying a New Note
turningtechnologies.com/user-guides
5
6
6
7
7
8
8
8
9
10
10
10
11
11
11
11
12
12
15
15
15
15
16
16
16
17
18
18
19
19
20
20
21
22
22
23
23
23
24
24
24
Mobi 360
turningtechnologies.com/user-guides
25
25
25
26
26
27
27
27
28
28
30
30
31
31
32
32
32
34
34
36
37
Mobi 360
Mobi 360 is the mobile interactive whiteboard used to display coursework, annotate your computer desktop, and pose
interactive questions.
The Mobi 360 comes with a receiver, USB cable, charging stand and digital pen.
NOTE
The digital pen does not contain any ink and cannot be used to write on paper or surfaces other than the
Mobi 360.
Through the Mobi 360, you can:
l
Access Favorites
Interact with any software installed on your classroom computer by using the Mobi 360 as your keyboard and mouse
Technical Requirements
The only requirement for the Mobi 360 is that the connected computer has the Insight 360 software installed and running.
turningtechnologies.com/user-guides
Mobi 360
turningtechnologies.com/user-guides
Mobi 360
3 Turn on the Mobi 360 by pressing the blue power button on the top of the unit.
The message Please wait while a connection to Insight is being established is displayed on the Mobi 360 screen.
4 When the message, Mobi is unable to connect is displayed, tap Settings.
5 Tap Pair with Hub.
6 Press the blue button on the Mobi 360 receiver while the receiver is still inserted into the USB port on your computer.
7 Tap Continue on the Mobi 360.
8 The message Please wait while a connection to Insight is being established shows is displayed on the Mobi 360 screen.
9 When Mobi 360 connects to its receiver, the Mobi 360 Home screen is displayed.
turningtechnologies.com/user-guides
Mobi 360
Updating Firmware
Turning Technologies periodically updates the firmware on the Mobi 360, the Mobi 360 receiver and student devices. If Insight
360 detects a new version of the firmware for the Mobi 360, Mobi 360 receiver or handset receiver, it generates a message at
startup on the Mobi 360. Insight 360 also generates a message in the Message Center and places an icon next to the firmware
version requiring update in Device Management in My Settings. You can begin the firmware update process by clicking the link
displayed in the Insight 360 Message Center.
1 The One or more of your devices has a firmware update available message
is displayed in the Message Center when you start the Mobi 360.
2 If updating the Mobi 360 firmware, remove the Mobi 360 receiver from the
classroom computer running Insight 360.
3 Connect the device (Mobi 360, Mobi 360 receiver or handset receiver)
requiring the firmware update to the computer running the Insight 360
software via USB or USB cable.
turningtechnologies.com/user-guides
Mobi 360
NOTE
Do NOT attempt to update the Mobi 360 using the charging stand. Information will not flow from
the charging stand to the Mobi 360. Use the USB cable provided to connect the Mobi 360 directly
to your computer.
4 Open Insight 360.
5 The Insight 360 Message Center displays an Update message informing you that a firmware update is available for the
Mobi 360.
6 Click the underlined Update link in the Insight 360 message.
A message box opens to inform you that you are about to update your device and asks if you want to continue.
7 Click Yes.
NOTE
During the firmware update process, do NOT turn off or disconnect the Mobi 360 receiver or the
Mobi 360 USB cable.
8 When the update is complete, the Firmware Update dialog box appears. Click OK.
turningtechnologies.com/user-guides
Mobi 360
10
Starting a Class
When you tap Teach Class on the Mobi 360, the device initially displays information for the class configured in Insight 360 to
take place during the current date and time.
This section covers the following topics:
Starting a Class Session
Changing a Class
Starting an Anonymous Class Session
Accessing Favorites
Recognize the student response clickers by their student or sticker IDs (depending on setup configuration)
Match the student response systems with the students during the class session
Changing a Class
When you tap Teach Class on the Mobi 360, the class that is normally scheduled for the current date and time appears. If this
is not the class you want to start, you can change to a different class.
NOTE
Change Class works only if you have not already started the class. If you have already started a class
and want to change, you must end the class first.
1 Tap Teach Class.
The currently scheduled class name, time and period is displayed.
2 Tap Change Class.
3 Tap the class you want to start.
Tap down to view more classes.
4 Tap Start Class.
turningtechnologies.com/user-guides
Mobi 360
11
Accessing Favorites
The information stored on the My Favorites tab in Insight 360 can be accessed
directly from the Mobi 360.
1 Tap Favorites.
2 Tap the item to display.
3 To access Favorites on other pages, tap the up or down arrows.
Store the Mobi 360, charging stand, digital pen, and student devices in a clean, dry place
Periodically charge the battery on the Mobi 360 and its digital pen
Replace the batteries in the Mobi 360 and digital pen as needed
The Mobi 360 is delivered with a partial charge to allow you to start using it directly after unpacking the system
The battery must be charged periodically to ensure the Mobi 360 is available for use when you need it
The digital pen is charged from the Mobi 360 battery when the pen is fully seated in its Mobi 360 holder
turningtechnologies.com/user-guides
Mobi 360
12
When not being used, the Mobi 360 should remain on its charging stand to ensure it receives a full charge
The charging stand must be plugged into an electrical outlet using the standard electrical plug for your country
IMPORTANT
Do NOT attempt to charge the Mobi 360 by plugging the charging stand into a computer's USB port.
When using the charging stand, insert the USB end of the charging stand cable into the electrical plug
appropriate for your country, and then connect the electrical plug into an electrical outlet.
1 Use a Phillips screwdriver to loosen screws on battery compartment cover, located on back of Mobi 360 and remove the
battery cover.
2 Remove and disconnect the existing battery pack.
3 Connect the new battery pack.
4 Gently insert the new battery pack into the compartment.
IMPORTANT
Avoid pinching the wires as you replace the battery cover.
5 Replace the battery cover and tighten the screws.
6 Charge the Mobi 360 battery for eight hours. Place the Mobi 360 on the charging stand plugged into an electrical outlet.
The digital pen charges whenever it is securely placed in its holder in the back of the Mobi 360
Store the pen in its holder when the pen is not in use
When the digital pen is in its holder on the Mobi 360, the pen charging icon appears
You may also see other icons associated with the pen:
l
A charging icon
Pen detected
NOTE
To conserve battery life, the pen goes into sleep mode after two minutes of inactivity. Click the rocker
button or touch the tip to reactivate the pen.
1 Insert the pen into the pen holder at the top of the Mobi 360.
2 Press the pen firmly into the holder to ensure a good connection with the recharger.
3 Store the pen in the pen holder when the pen is not in use.
4 Allow eight hours for the pen battery to fully charge.
turningtechnologies.com/user-guides
Mobi 360
13
TIP
To extend the life of the battery, remove the battery from the pen when the pen will not be used for an
extended period of time (for example, during summer holiday).
1 Gently press the tab and slide the two sections of the pen apart.
2 Remove the old battery.
3 Insert a new AAAA rechargeable battery with the positive terminal
(+) facing toward the tip of the pen.
4 Press the pen tip.
The LED located at the pen tip will flash four times if the battery
was inserted correctly.
If the LED does not flash four times, remove the battery, check that the battery's positive (+) end is facing toward the tip
of the pen, and re-insert the battery.
5 Align the ridges of the pen's back section with the slots of the pen's front section and slide the two sections together
until the tab re-engages.
6 Charge the pen battery for eight hours.
turningtechnologies.com/user-guides
Mobi 360
14
LESSON ZONE
Most of your instruction time will be spent in the Lesson Zone. At the bottom of the Mobi 360 screen, tap Lesson.
The Lesson Zone contains the following:
l
Display options
Classroom computers desktop - The classroom computers desktop and any documents or programs opened
from the desktop
Whiteboard mode - A plain white screen as a background for drawing or writing.
Display Screenshots - Screen captures (called screenshots) taken during the same class session.
Annotation tools
Multi-user functions
Keyboard functions
Sorter tool
Screenshot tools
turningtechnologies.com/user-guides
Mobi 360
15
Display Options
This section covers the following topics:
Displaying the Computer Screen from the Mobi 360
Displaying Whiteboard Mode from the Mobi 360
Using the Curtain to Hide the Screen
turningtechnologies.com/user-guides
Mobi 360
16
To select an area, tap and drag the pen across the Mobi 360 writing surface.
To right-click, press and hold the rocker button, tap once and release the rocker button.
turningtechnologies.com/user-guides
Mobi 360
17
1 Tap Lesson.
2 Tap the Pen icon.
l
Tap and drag the pen across the Mobi 360 writing surface to write or
draw.
l
To draw a straight line hold the top rocker button down before
touching the pen tip to the Mobi 360 writing surface, drag the pen
across the writing surface, then release the rocker button before
lifting the pen from the writing surface.
To draw a straight line, hold the top rocker button down before touching the pen tip to the Mobi 360 writing
surface, drag the pen across the writing surface, then release the rocker button before lifting the pen from the
writing surface.
turningtechnologies.com/user-guides
Mobi 360
18
With the pen or highlighter selected hold the top rocker button down before touching the pen tip to the Mobi 360 writing
surface, drag the pen across the writing surface, then release the rocker button before lifting the pen from the writing
surface.
With the line tool selected drag the digital pen across the Mobi 360 writing surface.
turningtechnologies.com/user-guides
Mobi 360
19
1 Tap Lesson.
2 Tap the Line Tool icon.
TIP
Tap the Point icon to use the mouse point to control the classroom computer desktop.
turningtechnologies.com/user-guides
Mobi 360
20
Multi-User Mode
The Mobi 360s Multi-User mode allows the instructor and up to four users to write or draw on the projected computer screen at
the same time.
A Mobi family student device (such as an MobiView, Mobi Learner or Mobi KWIK), device with the Insight 360 Teacher or
Insight 360 Student app installed, or DualBoard must be connected to the Insight 360 system for each simultaneous user.
A DualBoard provides connections for two students. In 4-way mode, the DualBoard will always occupy the bottom two
quadrants.
If at least one student device is running the Insight 360 Student app, the teaching device must be running the Insight 360
Teacher app. No other devices can connect to the Insight 360 Teacher app session except other devices running the Insight
360 Student app or Insight 360 Web Access browser-based application. When all devices are running Insight 360 Teacher or
Student applications, the Multi-user button engages Constructed Response mode.
Users can share the same space on the screen (called the Sandbox) or the screen can be split into two or four parts.
l
If the screen is split, each student device is assigned to its own section of the screen. Devices are selected
automatically by the Mobi 360. Instructors using the Insight 360 Teacher app can assign devices to specific sections.
The instructors Mobi 360 keeps its teach class capability and can annotate and control any part of the screen.
The entire screen or individual sections can be quickly hidden, locked or erased using the Mobi 360.
Insight 360 automatically captures and saves screenshots when you enter and exit Multi-user mode on the Mobi 360.
On the instructors device, any annotation that you can make in the Lesson Zone can also be done in Multi-user mode.
Tapping either of these buttons opens the corresponding screen on the Mobi 360. To exit that screen, tap Back.
This section covers the following topics:
Entering Multi-User Mode
Locking or Hiding the Screen in Multi-User Mode
Exiting Multi-User Mode
3 To keep the background constant while in Multi-user mode, tap Use Fixed Background.
NOTE
If Use Fixed Background is selected, the computer desktop will not be available until Multi-user
mode is closed. Screen division lines do not show on the fixed background.
4 Tap Start.
turningtechnologies.com/user-guides
Mobi 360
21
While in Multi-user mode, you have access to all of the tools in the Lesson Zone. However,
connected student devices can only use pen, eraser and delete all tools.
l
Student tools show in a toolbox in a corner of the screen assigned to the learner device.
By default, student devices are connected with the pen tool selected.
l
l
Students can change pen color or eraser size by tapping and holding the corresponding icon in
the toolbox, then tapping the option in the expanded toolbox.
Each student can delete everything drawn from his own student device by tapping Delete All.
If a student is using a Mobi 360 as a learner device, the Hide/Show and Lock/Unlock icons will
show in the Mobi 360 digital screen. These icons are indicators of the student devices status;
the student cannot use these to hide/show the annotations or lock/unlock the device.
6 Multi-user mode is closed, the Mobi 360 saves the current background for later Multi-user sessions within the same
class session.
turningtechnologies.com/user-guides
Mobi 360
22
1 In Multi-user mode, tap the Lock icon near the top center of the Mobi 360 screen.
2 In the section of the Mobi 360 screen corresponding to the section you want to lock or hide on the classroom computer
screen, tap the Lock or Hide icon. That section of the screen will be locked or annotations hidden.
NOTE
These icons are toggles. To unlock or show annotations on the screen, tap the corresponding
button again.
3 To return to Multi-user mode, tap Back.
turningtechnologies.com/user-guides
Mobi 360
23
Annotation Icons
The Lesson Zone contains the following annotation icons:
Mouse Pointer - Uses the pen as a mouse to
control the classroom computer.
Hiding Annotations
Using the Mobi 360, you can hide all annotations currently displayed on the classroom computer screen. Hiding annotations
temporarily removes all writings and drawings generated by the Mobi 360 from the classroom computer screen. The
Hide/Show button is a toggle that shows the current state. You can show hidden annotations by tapping Hide/Show.
1 From the Lesson Zone, tap the Hide/Show button.
NOTE
If you are in Multi-user mode, you can tap Unlock to access individual Hide icons for different
parts of the screen. See Locking or Hiding the Screen in Multi-User Mode for more
information.
Deleting Annotations
Using the Mobi 360, you can delete (or clear) all annotations currently showing on the classroom computer screen. Deleting
annotations permanently removes all writings and drawings generated by the Mobi 360 from the classroom computer screen.
To delete just a portion of the screen, use the digital pen with the Eraser tool.
1 From the Lesson Zone, tap the Delete button.
turningtechnologies.com/user-guides
Mobi 360
24
Notes
You can create and display a Note relating to the current class session on the Mobi 360 and the Insight 360 Teacher app.
Tapping Note in the Lesson Zone opens Note View. The Note View contains Pen, Mouse Point and Eraser tools. Options for
writing, erasing, deleting and displaying a Note are provided along with color and line width options. Notes are saved only for
the duration of the current class and are deleted when the class ends.
The Note Pen tool works the same as the Lesson Zones digital pen. In Note View, you can write directly on the Mobi 360
screen or on the normal writing area to compose Note.
To access the Note Pen tool, tap Note from the Lesson Zone (The Pen tool is selected by default.). Alternatively, Tap Pen from
the Note View.
This section covers the following topics:
Note Icons
Creating and Displaying a New Note
Using the Mouse Pointer in Note View
Using the Eraser in Note View
Displaying a Previous Note
Deleting a Note
Note Icons
Note View contains the following icons:
Mouse Pointer Uses the pen as a computer
mouse while in Note View.
turningtechnologies.com/user-guides
Mobi 360
25
turningtechnologies.com/user-guides
Mobi 360
26
You can display these Note on the Mobi 360 or on the classroom computer. On the Mobi 360, only one note can display at a
time. Multiple Notes can be displayed on the classroom computer desktop. Up to 20 Notes may be created during each class
session. All Notes are deleted when the session ends. Insight 360 does NOT save session Notes.
1 Tap the Scroll Left icon until the desired note appears on the Mobi 360 screen.
2 Tap the Display Note icon to show the current note on the classroom computer desktop.
NOTE
Notes are saved only for the duration of the class session. You cannot retrieve a Note created in a
previous session.
3 To change the color of a displayed Note, tap the Note, tap Background, then tap the Display Note icon.
4 To exit Note View, tap Back.
Deleting a Note
You can delete a note from the computer screen or permanently delete the note from the Mobi 360.
1 To delete a Note from the computer screen:
a With the Mouse Pointer tool, click X in the top corner of the note.
NOTE
Deleting a note from the computer screen does not delete the note from the Mobi 360.
2 To delete a Note from the Mobi 360:
a In Note View, tap the Scroll Left icon or the Scroll Right icon to find the desired note.
b Tap the Delete Note icon.
NOTE
Deleting a note from Note View permanently deletes the note. There is no Undo for this action,
and the deleted note cannot be retrieved.
3 To exit Note View, tap Back.
Screenshots
A screenshot is an image of the classroom computer screen at a particular point in a class session. The Screenshot feature
saves an image of the classroom computer screen.
NOTE
Insight 360 automatically saves screenshots during the following actions:
l
turningtechnologies.com/user-guides
Mobi 360
27
Saving Screenshots
Displaying Screenshots
Using the Screenshot Sorter
Annotating Screenshots
Accessing Screenshots from Insight 360
Saving Screenshots
To save screenshots with the Mobi 360, follow the steps below.
1 From the Lesson Zone, tap the Screenshot icon.
The number in Screenshots Display increases by one.
The screenshots are saved in a folder on the classroom computers hard drive. Insight 360 will store a maximum of
10,000 screenshots per session. The total number of screenshots saved is limited by the size of your computers hard
drive.
Displaying Screenshots
You can display screenshots on the classroom computer desktop in two ways:
l
l
When you enter Screenshots Display mode, the last saved screenshot initially appears on the classroom computer screen
bordered in white. A numeric identification (such as 1/3 to indicate 1 of 3 screenshots) is displayed in the upper left corner. The
Mobi 360 provides arrows to scroll through saved screenshots.
1 From the Lesson Zone, tap Screenshots Display.
The most recent screenshot appears.
2 To access previous screenshots, tap the left arrow next to Screenshots Display.
3 To exit Screenshots Display mode, tap Desktop Display or Whiteboard Display.
ExamView Questions
Verbal Questions
Tagged Questions
By default, screenshots from all categories display when the Sorter first opens. You can view screenshots only from a certain
category by turning off the non-desired categories.
turningtechnologies.com/user-guides
Mobi 360
28
Annotating Screenshots
In Screenshot mode, you can use any annotation tool to make changes to the current screenshot. When you navigate away
from that screenshot using either the screenshot navigation arrows or by changing the display option, Insight 360 automatically
captures a new screenshot with the changes. Once you end a class session, the screenshots are saved by Insight 360.
1 Access the desired screenshot.
2 Use an annotation tool to make changes to the screenshot.
3 To save changes, click the screenshot navigation arrow or change the display option to Computer Desktop or
Whiteboard.
turningtechnologies.com/user-guides
Mobi 360
QUESTION ZONE
The Question Zone allows you to:
l
To access the Question Zone, tap Question at the bottom of the Mobi 360 screen.
The Question Zone contains there icons:
Verbal - Impromptu questions set up on the Mobi 360.
Tagged - Written questions in existing course materials that have been electronically tagged for use with the
Insight 360 system.
ExamView - Instructor-led ExamView questions asked during instruction.
The four Question Zone icons toggle the corresponding items on and off the screen. Tap once to view and tap again to hide.
Timer - Displays the timer on screen for students to view.
Student Response Grid - Displays a grid indicating which student response systems have entered a response
to the current question.
Response Distribution Chart - Displays the Response Distribution Chart on screen for students to view.
Show/Hide Correct Answer - Only available when the Response Distribution Chart is showing. Displays the
correct answer in green on the Response Distribution Chart. When toggled off, all answers on the chart display
in blue.
This chapter covers the following topics:
Asking Verbal Questions During Instruction
Asking Tagged Questions
Asking ExamView Questions
Timing Student Questions
Initial Question Feedback
Displaying the Student Response Grid On-screen
Displaying Question Results On-screen
turningtechnologies.com/user-guides
29
Mobi 360
30
turningtechnologies.com/user-guides
Mobi 360
31
turningtechnologies.com/user-guides
Mobi 360
32
4 To display the timer on-screen, tap the Timer icon in the upper-right corner of the Question Zone.
The On Screen Timer opens on the classroom computer desktop.
5 If all students answer the question before the timer reaches zero seconds, tap Stop to stop the timer.
A gray block indicates that a student devices has joined the class session.
A blue block indicates that Insight 360 has recorded the students response from his/her device.
turningtechnologies.com/user-guides
Mobi 360
33
turningtechnologies.com/user-guides
Mobi 360
34
RESULTS ZONE
The Results Zone provides two types of question results.
l
Question-specific results of the most recent Verbal, Tagged or ExamView question which can be viewed with the
Response Distribution, Response Grid and Student Performance Charts
Cumulative summary results for all questions in the current class session which can be viewed with the Performance
Summary or Item Summary Charts
Item Summary
Response Grid
Student Performance
Performance Summary
Viewing Reports
The Results Zone provides two types of question results.
l
Question-specific results of the most recent Verbal, Tagged or ExamView question which can be viewed with the
Response Distribution, Response Grid and Student Performance Charts
Cumulative summary results for all questions in the current class session which can be viewed with the Performance
Summary or Item Summary Charts
turningtechnologies.com/user-guides
Mobi 360
35
turningtechnologies.com/user-guides
Mobi 360
36
The Item Summary displays session question data by question number. The
Item Summary also displays number of students who answered correctly,
number of students who answered incorrectly, class percentage of correct
answers, and type of question. The Item Summary is similar to the Question
Analysis report on the My Results tab in the Insight 360 software.
The list can be filtered by question type.
Six questions are displayed; use the scroll bar to view additional questions. By
default, all question types show, to filter them tap Filter.
The Item Summary cannot be displayed on the classroom computer screen.
turningtechnologies.com/user-guides
Mobi 360
37
CONTACT US
For additional help, contact Turning Technologies Technical Support.
Technical Support is available from 7 a.m. - 9 p.m. EST.
From within the contiguous United States, you can reach Technical Support toll-free by calling 866.746.3015. If you are calling
from outside of the United States, please call +1 330.746.3015.
Technical Support may also be reached via e-mail at support@turningtechnologies.com or support@einstruction.com, a
brand of Turning Technologies.
Office Locations
Ohio
Belfast
19 Colvin House
Inspire Business Park
Carrowreagh Road
Belfast BT16 1QT
United Kingdom
Direct: +44 (0)28 9048 7898
Paris
Amsterdam
Seinstraat 20-05
1223 DA, Hilversum
The Netherlands
Direct: +31 (0)85 4011 040
turningtechnologies.com/user-guides