Beruflich Dokumente
Kultur Dokumente
3 TPI ACME-2G
3 TPI ACME-2G
WOODCO USA
WOODCO USA
3 TPI ACME-2G
A close fit of the tool faces to the union profile features, identifies the union geometry. Identification of
geometry only, requires that operators assume the lowest working pressure for that geometry.
Go to http://www.woodcousa.com/id_tool.htm to print these instructions
or to find more information about Figure Number Unions.
REV. 12/10/2012
WOODCO USA
Phone: 713-672-9491 USA and Canada: 1-800-496-6326 Fax: 713-672-8768
www.woodcousa.com Email: sales@woodcousa.com
Instructions For 2 Fig. 602 / 1002 Hammer Wing Union Identification Tool
WOODCO USA provides these tools for identification, estimating, and reference only. Do not use them
for manufacturing or inspection. Users of these tools should not use them as a sole means of Union
identification. Anyone making use of these tools does so at his own risk and assumes any and all liability
resulting from such use. We recommend that operators not connect unions that do not display marking
indicating the same figure # designation and working pressure on each connecting half.
WOODCO USA
http://www.woodcousa.com/id_tool.htm
713-672-9491
WOODCO USA
A close fit of the tool faces to the union profile features, identifies the union geometry. Identification of
geometry only, requires that operators assume the lowest working pressure for that geometry.
Go to http://www.woodcousa.com/id_tool.htm to print these instructions
or to find more information about Figure Number Unions.
REV. 12/10/2012
WOODCO USA
Phone: 713-672-9491 USA and Canada: 1-800-496-6326 Fax: 713-672-8768
www.woodcousa.com Email: sales@woodcousa.com
2 602 / 1002 Union Identification Tool Shown Checking a 2 1502 Hammer Wing Union
WOODCO USA provides these tools for identification, estimating, and reference only. Do not use them
for manufacturing or inspection. Users of these tools should not use them as a sole means of Union
identification. Anyone making use of these tools does so at his own risk and assumes any and all liability
resulting from such use. We recommend that operators not connect unions that do not display marking
indicating the same figure # designation and working pressure on each connecting half.
ILLUSTRATION
SHOWING A 602 /
1002 IDENTIFICATION
TOOL CHECKING THE
THREAD OF A 2 1502
MALE NUT. NOTICE
THE THREADS HAVE
THE SAME PITCH BUT
ARE DEEPER ON THE
NUT.
WOODCO USA
ILLUSTRATION SHOWING A
602 / 1002 IDENTIFICATION
TOOL CHECKING A 2 1502
FEMALE UNION. NOTICE THE
TOOL WILL NOT FIT ON THE
UNION.
ILLUSTRATION SHOWING A
602 / 1002 IDENTIFICATION
TOOL CHECKING A 2 1502
MALE NUT. NOTICE THE LOOSE
FIT.
WOODCO USA
ILLUSTRATION
SHOWING A 602 /
1002 IDENTIFICATION
TOOL CHECKING
THE THREAD OF A 2
1502 FEMALE UNION.
NOTICE THE THREADS
HAVE THE SAME PITCH
BUT ARE DEEPER ON
THE UNION.
A close fit of the tool faces to the union profile features, identifies the union geometry. Identification of
geometry only, requires that operators assume the lowest working pressure for that geometry.
Go to http://www.woodcousa.com/id_tool.htm to print these instructions
or to find more information about Figure Number Unions.
REV. 12/10/2012
WOODCO USA
Phone: 713-672-9491 USA and Canada: 1-800-496-6326 Fax: 713-672-8768
www.woodcousa.com Email: sales@woodcousa.com
2 1502 Union Identification Tool Shown Checking a 2 602 / 1002 Hammer Wing Union
WOODCO USA provides these tools for identification, estimating, and reference only. Do not use them
for manufacturing or inspection. Users of these tools should not use them as a sole means of Union
identification. Anyone making use of these tools does so at his own risk and assumes any and all liability
resulting from such use. We recommend that operators not connect unions that do not display marking
indicating the same figure # designation and working pressure on each connecting half.
3 TPI ACME-2G
ILLUSTRATION SHOWING A
1502 IDENTIFICATION TOOL
CHECKING A 2 602 / 1002
FEMALE UNION. NOTICE THE
LOOSE FIT.
3 TPI ACME-2G
ILLUSTRATION SHOWING A
1502 IDENTIFICATION TOOL
CHECKING A 2 602 / 1002
MALE NUT. NOTICE THE TOOL
WILL NOT FIT IN THE NUT.
ILLUSTRATION
SHOWING A 1502
IDENTIFICATION
TOOL CHECKING
THE THREAD OF A 2
602 / 1002 MALE NUT.
NOTICE THE THREADS
HAVE THE SAME PITCH
BUT ARE SHALLOWER
ON THE NUT.
3 TPI ACME-2G
WOODCO USA
3 TPI ACME-2G
WOODCO USA
ILLUSTRATION
SHOWING A 1502
IDENTIFICATION
TOOL CHECKING THE
THREAD OF A 2 602 /
1002 FEMALE UNION.
NOTICE THE THREADS
HAVE THE SAME PITCH
BUT ARE SHALLOWER
ON THE UNION.
A close fit of the tool faces to the union profile features, identifies the union geometry. Identification of
geometry only, requires that operators assume the lowest working pressure for that geometry.
Go to http://www.woodcousa.com/id_tool.htm to print these instructions
or to find more information about Figure Number Unions.
REV. 12/10/2012