Beruflich Dokumente
Kultur Dokumente
Table of Contents
CAMSERV Aftermarket Services
CAMSERV Service Facilities . . . . . . 77
CAMWARE Software . . . . . . . . . . 78
CAMCHEC Riser Inspection
Services . . . . . . . . . . . . . . . . . . . . . 78
Drilling Systems
Surface Drilling Systems . . . . . . . . 80
Subsea Drilling Systems . . . . . . . . 81
Ram-Type and Annular BOPs . . . . 82
Rams and Ram Packers . . . . . . . . . 83
Collet Connectors . . . . . . . . . . . . . 84
Riser Systems . . . . . . . . . . . . . . . . 85
Motion Compensation Systems . . .86
Drilling Control Systems . . . . . . . . 88
Offshore Systems
Project Management . . . . . . . . . . 90
Systems Solutions . . . . . . . . . . . . . 92
SpoolTree Production Systems . . . 94
Dual Bore Production Systems . . . 95
TLP Systems . . . . . . . . . . . . . . . . . 96
DDCV Systems . . . . . . . . . . . . . . . 97
CAMTROL Production Controls . . 98
Surface Systems
Conventional Wellhead
Systems . . . . . . . . . . . . . . . . . . . . 104
Compact & Multi-Bowl
Wellheads . . . . . . . . . . . . . . . . . . 105
Conductor Sharing, SpoolTree
and Adjustable Wellheads . . . . . 106
Wellhead Connection Systems . . 107
API Gate Valves and Actuators
Gate Valves . . . . . . . . . . . . . . . . . 109
Large Bore Gate Valves . . . . . . . 110
Actuators . . . . . . . . . . . . . . . . . . 111
Surface Safety Systems . . . . . . . . 112
Cameron Willis
Surface Chokes and Actuators . . 113
Subsea Chokes and Actuators . . 115
Cooper Cameron Valves
Orbit, TruSeal, TriAx and
Cameron Valves . . . . . . . . . . . . . 117
W-K-M, Foster and
DEMCO Valves . . . . . . . . . . . . . . 118
W-K-M Ball Valves . . . . . . . . . . . 119
DEMCO and W-K-M
Butterfly Valves . . . . . . . . . . . . . 119
Thornhill Craver Chokes . . . . . . . 119
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
CAMERON COMMERCE
The Cameron Commerce function of
TRANSACT offers an online, 24/7 purchasing
tool for quality Cameron equipment. Specify
a system. Create an inquiry. Track an order.
Buy a replacement part. Obtain a budget
quote. Check inventory status. All online.
All available now. Simply create your
TRANSACT account, click on the Cameron
Commerce icon, and you have online access
to the industrys first true e-commerce site and a wealth of
valuable information becomes availableright at your fingertips.
Heres a quick look at how it all works.
Once registered, a customized
welcome screen provides a gateway to all functions. In addition,
this screen also provides a message
center to relay important information to specific customers.
From here, clicking on the
Cameron Commerce icon takes
you to the Dashboardthe hub
of the Cameron Commerce
application. It is the primary
working area where you can access a recent list of inquries, quotes and orders as well as
check availability and pricing of parts.
Create an Inquiry The inquiry function contains all elements needed to produce a
budgetary quote including online tools such as search parts, flange slide rule, actuator
sizing and BOP shear calculators.
Convert an Inquiry to a Quote or Order Once an inquiry has been built, it can
easily and quickly be submitted to the Cameron sales force for formal acknowledgement
and quotation or ordering.
Quote and Order Review the status of all orders, confirm price and availability.
Search for a Template The template function allows you to search for preconfigured, pre-approved systems or assemblies. A template may be a fully functional
assembly or a collection of spare parts for a particular product.
Many other functions are available such as
check order status, copy an existing quote or
order to a new inquiry.
Be sure to set up your TRANSACT account
today. Go to www.camerondiv.com/transact.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Edmonton, Canada
Veracruz, Mexico
Macae, Brazil
Maracaibo, Venezuela
Zarate, Argentina
Cameron Aberdeen Service Center Reports One of Many CAMSERV Aftermarket Success Stories
Before
After
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Aberdeen, Scotland
WESTERN HEMISPHERE
EASTERN HEMISPHERE
Canada
Europe
Edmonton, Alberta
Aberdeen, Scotland
United States
Celle, Germany
Anchorage, Alaska
Great Yarmouth, UK
Bakersfield, California
Berwick, Louisiana
Broussard, Louisiana
Stavanger, Norway
Casper, Wyoming
Celle, Germany
Stavanger, Norway
Melbourne, Australia
Africa
Luanda, Angola
Houston, Texas
Katy, Texas
Laurel, Mississippi
Liberty, Texas
Caspian Region
Longview, Texas
Baku, Azerbaijan
Odessa, Texas
Tengiz, Kazakhstan
Muscat, Oman
ASIA PACIFIC
Tomball, Texas
Batam, Indonesia
Vernal, Utah
Hattar, Pakistan
Jakarta, Indonesia
Mexico
Reynosa, Mexico
Veracruz, Mexico
Fully pressure test the tree and tree cap to locate any leaks
Upgrade tree and tree cap to the latest design revisions
Flush all hydraulic lines to National Aerospace Standard Class 6
cleanliness
Install downhole pressure transducer
Remove, strip down, clean, inspect, reassemble, test and flush all
actuators
Full systems integration testing of tree and tree cap with heavy-lift
module equipment and ROV tooling package
The Aberdeen CAMSERV team completed the job in 41 days and the
tree was shipped back to the rig in time to meet the rig schedule.
South America
Perth, Australia
Anaco, Venezuela
Singapore
Macae, Brazil
Maracaibo, Venezuela
MIDDLE EAST
Maturin, Venezuela
Cairo, Egypt
Zarate, Argentina
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Muscat, Oman
Reconditioned Equipment
Field Service
CAMSERV Service Centers stock replacement parts (new and reconditioned) for many Cameron products for immediate delivery. Less
frequently needed items or parts for older equipment can be quickly
located through our Global Product Search Engine (GPSE). In addition,
a secure, restricted-access Transact section of the Cameron website
has been set-up to offer electronic ordering of many types of replacement parts.
Replacement Parts
CAMWARE Software
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Drilling Systems
Cameron has designed, manufactured and delivered surface and subsea
drilling systems from the wellhead through the manifold to meet a wide
variety of customer requirements and drilling applications. These systems
are being used in projects from Africa to the Gulf of Mexico and represent Cameron system solutions and their array of design configurations.
Riser Systems
Control Systems
Cameron has delivered complete drilling systems for drillships, semisubmersibles, platforms and jackups. These rigs have rated water depths
from several hundred to over 10,000 feet and operate from 5000 to
15,000 psi working pressure.
Many of the control systems used on these rigs are Cameron Controls
Multiplex (MUX) BOP Control Systems. Camerons MUX system features
the lightest weight, most compact pod in the industry. In addition,
Cameron offers the industrys only fully retrievable MUX pods. The
popularity of the Cameron MUX control system has made Cameron
Controls the industry leader in the supply of drilling control systems.
Cameron Controls also offers direct hydraulic control systems for subsea
and land applications.
Cameron has also provided the manifold systems for many drilling rigs.
Cameron provides complete manifold systems from the surface panels
to the chokes, valves, actuators and pressure transmitters.
FPSO Application
BOP Stack
7
8
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
15
19
16
1
21
20
2
10
6
17
18
11
3
5
7
8
9
13
14
12
Riser
System
9
5
10
1
8
5
3
4
3
9
Stack
System
10
11
12
14
13
TL BOP
The TL BOP integrates all of the design features of Camerons popular
T and U BOPs into a lightweight unit. The TL offers side ram removal
and other features which reduce maintenance and rig time.
Application:
Bore Sizes and
Working Pressures:
Body Styles:
Pressure-Energized Rams:
Bonnet Seal Carrier:
Hydromechanical Lock:
Single, double
Yes
Available
Wedgelocks (with pressure balance
chambers)
Hydraulically Opening Bonnets: Yes
UM BOP
The UM BOP is a lightweight BOP designed for easy maintenance and
long life. The UM complements the existing line of U preventers and
includes bonnets which can be installed on any comparable size U BOP.
Application:
DL Annular BOP
U BOP
The Cameron U BOP is the most widely used ram-type BOP in the world
and offers the widest range of sizes of any Cameron ram-type BOP.
Application:
Bore Sizes and
Working Pressures:
TL Blowout Preventer
(shown with RamLocks)
UM Blowout Preventer
DL Annular
Blowout Preventer
U Blowout Preventer
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
VBR-II
FlexPacker
FlexPacker-NR
CAMRAM Packer
TL BOP
UM BOP
U BOP
Elastomer
Per NACE
Shearing
Shearing Blind Rams
DVS Shear Rams
Super Shear Rams
H2S Shearing Blind Ram
Available
Available in Some Sizes
Available in Some Sizes
Available
Available
Available in Some Sizes
Available
Available
DUROCAM
DUROCAM
See Note
CAMLAST & DUROCAM
Yes
Yes
No
Yes
CAMRAM Nitrile
CAMRAM Nitrile
CAMRAM Nitrile
CAMRAM Nitrile
Yes
Yes
Yes
Yes
Pipe Rams
Standard Service
High Temperature Service
Yes
Yes
Yes
Yes
Yes
Yes
CAMRAM Nitrile
CAMLAST
Yes
Yes
Snubbing/Stripping
Grip and Seal Rams
Snubbing Insert Packers
Not Available
Not Available
7" Only
7" Only
Not Available
Not Available
CAMRAM Nitrile
CAMRAM Nitrile
Yes
Yes
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Collet Connectors
Collet Connectors
The Model 70 is offered in sizes and pressure ratings for a wide variety
of applications. The HC is similar to the Model 70 but is designed to provide greater preload to withstand higher separating forces. The DWHC is
a high strength drilling and completion collet connector engineered for
the high loads encountered in ultra deepwater applications. The HCH4
connector locks onto an H4 wellhead.
All Cameron connectors offer high strength and stiffness with a direct
load path through the connector and metal-to-metal sealing AX gaskets
on the collet end ensure seal integrity. Positively driven-open collet
segments during unlock ensure that no overpull is required to disconnect.
A secondary unlock function is also included in each design.
HC Collet Connector
13-5/8" to 21-1/4"
13-5/8" to 21-1/4"
18-3/4"
18-3/4"
15,000 psi
549,000 ft-lb
2,063,000 ft-lb
10,300,000 ft-lb
2,109,000 ft-lb
245,000 lb
4,385,000 lb
12,000,000 lb
4,740,000 lb
30
30
Preload
Maximum Release Angle
DWHC
HCH4
Note: Data for the Model 70, HC and HCH4 represents 18-3/4" 10,000 psi WP connectors.
AX Gasket
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
AX-AT Gasket
Riser Systems
Cameron offers drilling riser systems which accommodate the stringent
conditions encountered in deepwater drilling including high tension loads,
multiple control lines, and the need to respond to changes in surface
weather conditions. Riser sections are available in varying lengths, wall
thicknesses, and with preps for buoyancy materials as required. All
Cameron risers are supplied with integral choke and kill lines. Cameron
hydraulic or manual running tools are available for risers utilizing either
LoadKing or RF Riser Connectors.
Riser System
Riser Spider
Gimbal
Telescoping Joint
RF Riser Systems
The RF Riser Connector is designed to meet API 16R requirements with
fewer components and higher capacity than other flanged riser connectors. It is designed to meet the needs of the drilling industry for a
deepwater riser system that is less costly and quicker to operate than
conventional systems.
Riser Joint
Riser Joint
Riser Connector
Description
Rated Tension Load
Auxiliary Lines
Trim
LoadKing
RF
3,500,000 lb
2,000,000 lb
Up to Six Positions
Fixed
2" to 6-3/4" OD
Up to Six Positions
Interchangeable
2" to 5-1/2" OD
API 16R
API 16R
NACE MR-01-75
Riser Joint
Termination
Spool
Flex Joint
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Control Panels
Cameron Controls subsea MUX drilling control systems provide two
functionally identical control panels for both the driller and tool pusher.
Either panel is available as touchscreen interfaces. Both panels are
capable of full, independent control of the subsea drilling system.
Uninterruptible
Power Supplies (UPS)
Dual redundant UPSs are standard on
Cameron Controls subsea MUX
drilling control systems. Each UPS is
capable of providing power to the
electronic control system for a
minimum of two hours.
Uninterruptible
Power Supply
Hydraulic Power
Unit, Skid Mounted
Surface
Accumulator Racks
Surface Accumulator Racks are tied to the DCU, and are used to store
pressurized hydraulic fluid for controlling BOP and LMRP functions.
Piston, float and bladder
accumulators are available.
Accumulator Racks
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Cable Reels
Dual redundant reels supply electrical control cable to the subsea
electronic module within both subsea control pods. Each reel has an
operable capacity for the design water depth and includes automatic
constant tensioning and level-wind capabilities. Remote panels for
controlling two or three reels are available.
Subsea
Control Pods
The Cameron
Controls subsea
MUX drilling
control pods
combine rapid
response time
with an array of
features that
make them both
reliable
and economical.
The Mark I Pod
is designed for
most typical and
deepwater applications, offering a
compact footprint
Mark I (left) and Mark II (right) Subsea MUX Control Pods
and weight of
10,000 lb (4536 kg). The Mark II Pod weighs 15,000 lb (6804 kg) and
features high integrity components, combined with high electronic and
analysis functionality, for ultra-deepwater environments. The Mark I Pod
is capable of 72 functions. The Mark II Pod can be configured for up to
112 hydraulic functions.
The pod houses the Hydraulic Module and Electronic MUX Package.
Two accumulator banks are placed conveniently around the BOP stack.
The Hydraulic Module is a standard Cameron modular pod. Modules
feature seawater tolerant, stainless steel valves and pressure regulators
with sliding, metal-to-metal, shear type seals.
The electronic MUX package consists of the Subsea Electronics Module
(SEM) and the Solenoid Valve Package. The SEM, packaged in a dry,
nitrogen-purged atmosphere housing for easy maintenance, contains
dual redundant electronics which provide communications via modem
with the surface electronic system. The Solenoid Valve Package converts
the electronic commands into hydraulic signals which actuate the large
valves in the Hydraulic Module.
For every regulated circuit on the pod, there is an accumulator bank,
each containing four small accumulators, providing pilot pressure and
dampening. These enable the system to operate reliably at depths of
10,000 ft (3000 m).
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Offshore Systems
In todays fast-paced, cost-conscious subsea production industry, Cameron
has successfully met the challenge to deliver safe, reliable system
solutions. This experience allows Cameron to provide what no other
supplier can: Cameron quality from project concept through project
completion.
Whether the project requires components, modules or total field
development; existing technology or something innovative; EPC services
or EPIC services; Camerons flexible organization allows us to establish
teams strategically positioned to effectively handle the job.
CAMTROL System Factory Integration System
Camerons Subsea
Production Philosophy
Cameron works closely with our customers
to provide a big picture perspective and
to develop total system solutions that:
Reduce operational costs
Minimize capital expenditures
Proivide maximum quality and reliability
Meet or exceed all safety and
environmental standards
Provide life of field service
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Offshore Systems
Cameron Resources
Cameron maintains worldwide resources including:
Multi-disciplined engineering staff
Experienced project managers
Modern, well equipped manufacturing and assembly facilities
Ongoing research and development
CAMSERV Aftermarket Services Program
Cameron Products
Cameron has the industrys most comprehensive, highly respected product
line. Cameron products have proven themselves time and time again in
demanding service applications.
Cameron SpoolTree Christmas
Trees have set an industry
standard and the CAMTROL
Production Control Systems
offers the most advanced, highly
functional control of subsea
systems on the market today.
Other MOSAIC products such as
chokes, valves and connection
systems are equally renowned
for quality and reliability.
For more than 30 years,
Cameron
subsea systems have
CAMTROL System Integration Testing
set the industry standard. Only
Cameron can provide this level of experience and the coordination of
resources required to handle todays demanding subsea projects. Only
Cameron can provide Cameron quality from project concept and
development through the entire field life of the equipment.
Chokes
Controls
Manifold
Jumpers,
Connectors
HSE / QA
Planning
Interface
Document Con
trol
Procurement
Umbilical
Risers
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
valves are situated on the side of the spool. No valves are in the vertical
bore of the wellhead/tree system. The completion is run after the tree is
installed and the completion can be pulled with the tree in place and
flowline connections undisturbed.
MOSAIC SpoolTree Production Systems can be configured with a wide
array of component choices. The possible combinations of components,
available pressure ratings and sizes are virtually endless. The result is a
cost-effective system that can be adapted to virtually any subsea job.
Guidebase
For template or satellite installation. Guideline or
guidelineless. Variety of connection types available.
Valve Actuator
25 Compact Modular (CM) modules available.
Sizes from 2" to 7". To 15,000 psi WP.
Tree Connector
Mechanical or hydraulic. Deepwater high capacity
(DWHC) model available.
Wellhead
STM or STC wellhead. Metal-to-metal or metal endcap seals. Five or six string configuration. Variety of
casing programs.
8
9
6
7
Tubing Hanger
Up to six hydraulic and two electrical penetrations.
3" through 7" completions.
Subsea Choke
Diver-assist or diverless. Inserts are retrievable or
non-retrievable (fixed). Crown or clamp connectors.
10
Control Module
Up to 32 hydraulic control points. Variety of
intervention methods.
11
4
10
5
1
Basic
Production Choke
Chemical Injection
Annulus Crossover
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
10
Guidebase
For template or satellite installation. Guideline or
guidelineless. Variety of connection types available.
Valve Actuator
25 Compact Modular (CM) modules available. Sizes
from 2" to 7". To 15,000 psi WP.
Tree Connector
Mechanical or hydraulic. Deepwater high capacity
(DWHC) model available.
Wellhead
STM or STC wellhead. Metal-to-metal or metal endcap seals. Five or six string configuration. Variety of
casing programs.
Tubing Hanger
Choice of tubing sizes, threads and wireline preps.
Metal seals with resilient backup available. One to
four SCSSC ports. With or without electrical
penetrator.
Subsea Choke
Diver-assist or diverless. Inserts are retrievable or
non-retrievable (fixed). Crown or clamp connectors.
10
Control Module
Up to 32 hydraulic control points. Variety of
intervention methods.
8
5
Production
Production with
Internal Crossover
Production
with Choke
The Modular Dual Bore Tree has a total of 320 pre-determined master valve
block assemblies. Valve assemblies are available in 4", 5", or 6-3/8" nominal
bore sizes with 5000, 10,000 or 15,000 psi WP ratings. Valve assemblies feature
Cameron FLS gate valves with one-piece gate, spring-loaded seats
and corrosion-resistant, metal-to-metal seals for maximum sealing integrity.
A choice of 40 valve module arrangements is available for each wing valve
block, covering requirements for production, water injection and gas lift. The
modules offer flexibility in location of crossover valve, chemical injection valve,
etc. Master and swab valves are located in the well bore. Either commercial
cartridge-type isolation needle valves or Cameron heavy-duty isolation needle
valves can be used for chemical injection and control line isolation.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
TLP Systems
Drilling
Mode
Production
Mode
Surface Wellhead
and Tree
BOPs
Tensioner System
Tensioner System
Production Riser
System
Production Systems
Surface Christmas Trees
Surface Wellheads
Wellhead Connectors
Production Risers
Internal Production Tiebacks
Production Tieback Connectors
Production Riser Tensioner Systems
Stress Joints
Export Systems
Export Risers and Riser Bases
Manifolds/Tie-in Systems
Mooring Systems
Tendon Connector
Tendon Installation/Handling Equipment
Wellhead
Connection
Subsea Wellhead
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
DDCV Systems
Drilling Mode
Production
Mode
BOPs
Surface Wellhead
and Tree
Tensioner
System
Buoyancy Units
Drilling Riser
System
Production Riser
System
Drilling Systems
Ram-Type BOPs
Annular BOPs
Drilling Connectors
Drilling Controls
Drilling Wellheads
Adjustable Drilling Riser Hanger Systems
Riser Joints/Couplings
Riser Tieback Connectors
Tensioner Systems
Stress Joints
Keel/Transition Joints
Production Systems
Surface Christmas Trees
Surface Wellheads
Wellhead Connectors
Production Risers
Internal Production Tiebacks
Production Tieback Connectors
Stress Joints
Tension Land Monitoring System
Keel/Transition Joints
Buoyancy Unit Tensioner System
Wellhead
Connection
Subsea Wellhead
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
14
16
17
15
MMRT-SEM
6
7
10
3
4
Manifold
10
11
Workover Umbilical
12
13
8
6
11
12
13
5
6
System Applications
4
9
10
10
14
Platform Production
16
FPSO Produduction
15
Seabed Intervention
17
MODU Workover
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Worldwide Support
2
3
10
4
5
DCS Console
Control Room
Battery Bank
10
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Electrical Power
Unit (EPU)
The EPU provides
conditioned electrical
power to the topside
and subsea system
components. The EPU
supplies dual, isolated,
single-phase power for
the subsea system
through the composite
service umbilical,
together with power
supply modules for the
MCS and HPU.
Hydraulic Power
Unit (HPU)
The HPU provides
Electrical Power Unit
redundant low- and
high-pressure hydraulic
supplies to the subsea system. Self-contained and totally enclosed, the
HPU includes duty and backup electrically driven hydraulic pumps, dual
redundant filters, accumulators, and control and instrumentation for each
LP and HP hydraulic circuit. The unit operates autonomously under the
Topside Umbilical
Termination Unit
(TUTU)
Subsea Control
Module (SCM)
Rated for water
depths up to 10,000
ft (3000 m), the
CAMTROL SCM is the
heart of the subsea
system. The SCM
weighs less than
2200 lb (1000 kg)
Topside Umbilical Termination Unit
and measures only
29" x 29" x 34" high (736 mm x 736 mm x 860 mm high), making it the
lightest, most compact control module in the industry. This allows easy
installation and intervention by standard work-class ROVs with any of the
CAMTROL suite of Multi-Mode Running Tools. Yet with up to 32 control
functions, 24 external (4-20 mA) electrical sensor inputs and available
multi-dropped intelligent completion capability, the CAMTROL SCM leads
the industry in functionality and future potential. This can reduce the
number of SCMs needed for an entire project, thereby lowering capital
expenses.
The SCM provides multiplexed electro-hydraulic control and monitoring
of a wide variety of field functions including traditional tree functions,
manifold valve control, choke adjustment, position indication, header
pressure/temperature monitoring, downhole
intelligence monitoring, sand detection,
corrosion monitoring and multiphase flow
measurement. Other features include:
Oil-filled, pressure-compensated
construction designed for
14 to 122 F (10 to
+50C); controlledenvironment electrical
connections; seawatertolerant materials
available throughout
hydraulic system
Diverless or diverassisted designs
Subsea Control Module (HydraQuad Couplers not shown)
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Subsea Accumulator
Module (SAM)
Intervention Flexibility
The CAMTROL system uses
common intervention methods
for the retrieval and re-installation
of the SCM, as well as the SAM,
compact multi-phase flow meter
and Cameron Willis Subsea
Retrievable Chokes. Methods
may include diver-assist, diverless,
guideline, guidelineless and ROVassisted.
Multi-Mode
Running Tool (MMRT)
Cameron Controls offers a suite
of MMRTs, which perform
installation and retrieval of the
Multi-Mode Running Tool
for Seabed Exchange Mode
system elements detailed above.
The MMRT design allows these
operations to be performed using common intervention methods
diver-assisted, conventional guideline, guidelineless or with an ROV in
water depths to 10,000 ft (3000 m).
The MMRT is designed for efficient
operation with a work-class ROV and is
interface-compliant with API 17H using
weight transfer systems for neutral
buoyancy.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Surface Systems
Surface Systems
Cameron has earned a reputation as the worldwide leader in supplying
Surface Systems, supported by the industrys largest network of sales,
service and manufacturing facilities making Cameron the single source
supplier for Surface Systems.
Cameron offers a full range of surface wellhead and Christmas tree
systems for land and offshore applications. Each system incorporates
quality Cameron components including surface wellheads, Christmas
trees, actuators, chokes and controls. In addition, all casing and tubing
programs are provided from low pressure 2000 psi up to high pressure
30,000 psi.
Surface Systems have been developed to meet the needs of the
industry. Wellheads can be provided in either conventional spool or
compact. Christmas trees are provided with single unit stacked, or solid
block valves complete with Cameron Willis actuators, chokes and safety
controls.
All systems can be provided with trims to meet extreme well service
conditions from low pressure, low temperature to high pressure, high
temperature (HP/HT) with various produced fluids. Trims range from
carbon steel through stainless steels to nickel-based clad. Depending
upon service, elastomeric and metal-to-metal sealing are available.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Completion Systems
S Conventional
Wellhead System
A
P
I
T
E
M
P
E
R
T
U
R
E
R
A
N
G
E
180
82C
SB-5
150F
65C
SB-3
100F
38C
SB-6
IC-1
IC-1-P
IC-2
U T S P
50F
10C
0F
-17C
-20F
-29C
0
Cameron offers a variety of tubing spools and hangers for all types of
completions: single, dual and high pressure. Completion systems range
from low pressure, conventional equipment to systems for severe service
and geothermal applications. All Cameron completion equipment meets
or exceeds API 6A specifications. Cameron also offers a complete line of
Christmas trees for working pressures up to 30,000 psi.
IC Conventional
Wellhead System
10%
20%
30%
40%
50%
60%
70%
80%
Hang-Off Capacity
(%of Pipe Body Yield)
(Operating conditions vertified by API 6 A, 17th Edition, Appendix F testing)
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Wellhead Seals
Cameron wellheads offer a selection in sealing technology which increases versatility and ensures that the wellhead is adaptable for any
production environment. Available seals include metal-to-metal seals in
primary sealing applications and either LS elastomer seals or Camerons
exclusive Metal End-Cap (MEC) seal in the annulus. All elastomer seals
are available in premium elastomer materials developed by Cameron
Elastomer Technology specifically for oilfield applications.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
I
I
I
I
CSW Wellhead
SpoolTree Wellhead
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Compatibility:
Gasket Type:
Working Pressures:
Trim:
FlangeLock Connector
The FlangeLock Connector has been designed as an alternative to the
production version of the FastLock Connector and can be bolted directly
to the Fastlock Connector hubs. This allows for a smaller overall completion connection while providing maximum flexibility for drilling and
workover operations.
Application:
Alternative to production FastLock Connector
Compatibility:
Bolts directly to FastLock hub
Gasket Type:
CF
Working Pressures: Up to 6500 psi
Trim:
Fire-tested to API 6FB Part I and II and thermal
cycled per API 6A Appendix F. Meets NACE and
API specifications for H2S service.
FastClamp Connector
The FastClamp Connector was developed as an alternative to the conventional clamp assemblies and fits standard clamp hub profiles using
conventional API ring gaskets. The connector features reduced make-up
torque, faster make-up times and improved safety over conventional
clamps.
Application:
Replaces standard clamp connections
Compatibility:
Fits all standard clamp hub profiles
Gasket Type:
Conventional API ring gaskets
Working Pressures: Up to 15,000 psi
FastLock Connector
The FastLock Connector is designed to replace flanged connections for
wellheads and reduce make-up time.
Application:
Replaces standard flanged connection
FastLock Connector
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
FlangeLock Connector
FastClamp Connector
7 1/16
6 3/8
FLS
5 1/8
4 1/16
3 1/16
2 9/16
FLS
M215
M, FL, FLS
2 1/16
FLS
1 13/16
0
0
2,000
3,000
5,000
10,000
15,000 20,000
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
M Gate Valve
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
6-3/8" 15,000 psi WP; 9" 10,000 psi WP; and 9" 15,000 psi WP FLS-R Gate Valves
Large Bore HP/HT Tie-back Wellhead and Block Valve with Actuators
Large Bore Wellhead and Single Stacked Gate Valves with Actuators
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Saf-T-Gard Actuators
Cameron designs and manufactures a full range of Saf-T-Gard pneumatic
piston and diaphragm actuators and hydraulic and wireline cutting
actuators. These actuators can be used on the full line of Cameron gate
valves in wellhead and pipeline applications. Cameron actuators are
designed to be interchangeable and offer a wide range of flexibility.
CLOSE
OPEN
MP13
MH74
MA12
MP Series Pneumatic
Piston Actuator
MA Series
Pneumatic Diaphragm Actuator
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
MHW Series
Wireline Cutting Actuator
engineered pilot valves, pressure sensors, inline test valves, dump valves,
quick bleeds, probes, emergency shutdown valves and pressure regulators. Systems include high and low pressure sensing monitors which
ensure high calibration accuracy, continuous monitoring of shutdown
set points and accurate shutdown set point changes. In addition, these
systems help reduce maintenance time and costs because enclosures meet
the requirement for operation in hazardous locations without the need to
purge boxes.
3000 4000
2000
5000
1000
0
100
Ou
t
of
Se
rvic
SSV
SURE
PRES
psi
IN
ICE
SERV
PLOT
SURE
PRES
E
ESOCLOS
TO
PULL
ES
E
T MOD
PILO CTOR
SELE
PLOT
SURE
PRES
PLOT
SURE
PRES
LY
OR
T SUPP
PILO ULAT
REG
HIGH
T
PILO
LOW
T
PILO
6000
160
180
200
20
Se
rvic
e
psi
140
60
40
In
MA16
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
D
HAN P
PUM
H2
H2I
Environment
Surface
Subsea
Characteristics
Needle and Seat
Positive
Adjustable
Multiple Orifice Valve
Plug and Cage
External Sleeve
Manual
Actuated
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
SLCA Actuator
The SLCA Actuator is offered in both surface and subsea designs. It
provides precise incremental steps from open to closed.
Water Depth Rating:
To 10,000 ft (3048 m)
Pneumatic Operating Pressure: 100 psi, (80 psi min to 150 psi max),
110 ft/lb at 100 psi
Hydraulic Operating Pressure: 1500 psi, (3000, 5000 psi maximum)
Operating Temperatures:
Surface: 20 F to +150 F (29 C to 66 C)
Subsea: 0 F to +150 F (18 C to 66 C)
Performance Verification:
API 6A PR2, API 17D
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
SSLCA Actuator
The Subsea Stepping Linear Choke Actuator (SSLCA) was developed for
use on the Cameron Willis non-retrievable control chokes. The design
of the SSLCA actuator includes independent open and close piston
assemblies, providing a double step operation on the close piston
for rapid shut-in of the choke.
Aqua-Torq Actuator
The Cameron Willis Aqua-Torq Actuator is a compact and field-proven
hydraulic actuator which provides actuation in precise incremental steps
from open to closed. It is suitable for mineral oil and water-based
control fluids.
The Aqua-Torq Actuator is oil-filled and pressure-compensated and has
been endurance tested to a minimum of 1 million actuation pulses and
hyperbaric tested to 10,000 ft (3000 m). It incorparates a local, external
position indicator and is available with an internal LVDT remote position
transmitter.
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
DEMCO Gate Valves are the valves of choice, engineered and proven
for the drilling and production industries.
W-K-M DynaSeal ball valves are the accepted standard in oil and gas
production lines, gathering systems and gas processing applications.
Bi-directional W-K-M DynaCentric Butterfly Valves are high performance butterfly valves for demanding applications.
Resilient seated DEMCO butterfly valves provide long, trouble-free
service in lines up to 48" in diameter.
Resilient seated W-K-M Series E (economy) butterfly valves, sizes 2-24".
Rugged Thornhill Craver Chokes provide reliable control in both positive and adjustable configurations.
All of these products are backed by a worldwide sales and service
network. Cooper Cameron Valves technical experts can evaluate any
project, determine the appropriate equipment needed and make
recommendations.
Transmission
Offshore
Mainline
Compressor Stations
Meter/Regulating
Launchers/Receiver
Production
Flow Lines
Manifolds/Headers
EOR/Waterflood
Firewater Systems
Tank Batteries
Mud Tanks/Systems
Swab Valves
Field Compression
Gas/Oil Gathering
Gas/Oil Separation
Oil Production
Gas Storage
Gas Metering
Gas Measurement
Orbit
Valves
TruSeal
Plug Valves
TriAx
Process
Valves
Industrial
Chemical
Petrochemical
Pulp and Paper
Marine
Power Generation
Food and Beverage
Mining
Fuel System
Gas Distribution
Water and Sewage
Construction
Iron and Steel
Material Handling
W-K-M
W-K-M
W-K-M
DEMCO
DynaSeal DynaSeal DynaCentric Butterfly
Floating
Trunnion Butterfly
Valves
Ball Valves Ball Valves Valves
DEMCO
Gate
Valves
Drilling
Refining
W-K-M
Series E
Butterfly
Valves
Thornhill
Craver
Chokes
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Orbit Ball Valves, TruSeal Valves, TriAx Valves, Cameron Ball Valves
Orbit Valves
Orbit Valves are top-entry, rising stem, trunnion-mounted block valves.
These valves feature a unique mechanical wedge closure and tilt-and-turn
operation which eliminates seal rubbing.
Sizes:
1" through 24"
Pressure Classes:
150, 300, 600, 900, 1500, 2500
Operating Temperatures:
150 F to +800 F (101 C to +427 C)
End Connections:
Flanged, weld, weld-by-flange
Materials:
Carbon steel, stainless steel, duplex
stainless steel. Variety of trims available.
Options:
Manual, pneumatic, hydraulic or
electric actuators
Orbit Valve
TriAx Rotary
Process Valve
Cameron Bolted Body Ball Valves integrate the features of the popular
Cameron Welded Body Ball Valve into a bolted, 3-piece design.
Sizes:
2" through 42"
Pressure Classes:
150, 300, 400, 600, 900, 1500
Operating Temperatures:
50 F to +375 F (46 C to +190 C)
End Connections:
Flanged, weld, weld-by-flange
Body Styles:
Bolted, 3 piece
Materials:
Carbon steel, stainless steel, duplex
Variety of trims available
Options:
Gear, pneumatic, hydraulic, gas over oil
and electric actuators; high head and
right angle extensions
Cameron Welded Body Ball Valves feature a forged and welded body
design which is compact and streamlined for maximum strength and
minimum weight.
Sizes:
2" through 56"
Pressure Classes:
150, 300, 400, 600, 900, 1500, 2500
Operating Temperatures:
50 F to +375 F (46 C to +190 C)
End Connections:
Flanged, weld, weld-by-flange
Body Styles:
All welded
Materials:
Carbon steel, stainless steel, duplex
Variety of trims available
Options:
Gear, pneumatic, hydraulic, gas over oil
and electric actuators; high head and
right angle extensions
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
W-K-M Saf-T-Seal Gate Valves are slab-style gate valves featuring a simple,
reliable design.
Sizes:
2" through 48"
Pressure Classes:
150, 300, 600, 900, 1500, 2500
Operating Temperatures:
20 F to +400 F (29 C to +204 C)
End Connections:
Flanged, weld, weld-by-flange
Materials:
Carbon steel, stainless steel
Variety of trims available
Options:
Manual, pneumatic, hydraulic or
electric actuators
DEMCO Series DM
(API) Gate Valve
DEMCO Series DB
Gate Valve
W-K-M Pow-R-Seal
Gate Valve
W-K-M Saf-T-Seal
Gate Valve
DEMCO Series DT
Gate Valve
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
W-K-M Ball Valves, Demco and W-K-M Butterfly Valves, Thornhill Craver Chokes
W-K-M DynaSeal Ball Valves
W-K-M DynaSeal Ball Valves are high quality ball valves. The 310 2-piece
and 310 D models are floating ball valves. Trunnion styles include the
370 CT and 370 D4. The 370 CT and 370 D4 valves are two-piece,
end-entry valves.
Pressure Classes:
Operating Temperatures:
End Connections:
Body Styles:
Body Materials:
W-K-M Series E
Butterfly Valve
DEMCO
Butterfly Valve
W-K-M MB-1
Butterfly Valve
CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Cooper Cameron Valves
16500 South Main
Missouri City Texas 77489-1300
Tel 281 499 8511
Fax 281 499 6965
http://www.ccvalves.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes UB3 5AR
Tel 44 208 990 1800
Fax 44 208 990 1888
http://www.camerondiv.com
Cooper Cameron Valves
Houstoun Road
Livingston, West Lothian
Scotland EH-545 BZ
Tel 44 506 444 000
Fax 44 506 441 320
http://www.ccvalves.com
Aqua-Torq, CAMFORGE, CAMLAST, CAMRAM, CAMRAM 350, CAMSERV, CAMTROL, CAMULAR, CAMWARE, CAMCHEC,
CANH, CSW, DL BOP, DUROCAM, DW HC, DynaCentric, FastClamp, FastLock, FlangeLock, FL, FlexPacker, FlexPacker-NR,
H2 Classic, H2I, HC, HC H4, HydraQuad, IC Conventional, LoadKing, M, M-215, Metal End-Cap, MBS, Model 70, MOSAIC,
S Conventional, Saf-T-Gard, SlipLock, SpoolTree, SSMC, STC, STM, Thornhill Craver, TL BOP, U BOP, UM BOP AX-AT, FLS,
FLS-R, SLCA, SSLCA and VBR-II are trademarks of the Cooper Cameron Corporation, Cameron Division.
Cameron, DEMCO, D-Seal, DynaSeal, Foster, Orbit, Pow-R-Seal, Saf-T-Seal, TruSeal, Willis and W-K-M are registered
trademarks of the Cooper Cameron Corporation, Cameron Division.
Cooper Cameron Corporation, Cameron Division