Beruflich Dokumente
Kultur Dokumente
PROCENTEC
The PROFIBUS and PROFINET Company
Disclaimer of Liability
We have checked the contents of this catalog as much
as possible. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However,
the content in this catalog is reviewed regularly and
necessary corrections will be included in subsequent
editions. Suggestions for improvements are welcome.
Table of contents
About PROCENTEC
PROFIBUS Tools
ProfiTrace 2
ProfiCaptain
PA Probe Ultra
Tap Connector
ProfiTrace EDU
ProfiCaptain EDU
ProfiScript
BT200
ProfiHub Family
ProfiHub A5
ProfiHub B5
ProfiHub C5
9
14
16
16
17
17
18
19
20
22
24
26
28
29
30
PROFIBUS DP Connectors
32
33
33
33
34
34
34
35
35
35
PROFIBUS Cable
36
37
37
37
38
38
38
39
Table of contents
LEONI PROFIBUS DP fire cable
LEONI PROFIBUS DP trailing cable FRNC
LEONI PROFIBUS DP food cable FC
LEONI PROFIBUS DP robust cable
LEONI PROFIBUS DP festoon cable
39
39
40
40
40
41
41
42
42
42
PROFIBUS ASICs
44
45
45
46
46
47
48
48
49
49
50
50
PROFINET Tools
52
53
54
PROFINET Connectors
56
57
57
57
58
58
PROFINET Cable
LEONI standard PROFINET cable FC
LEONI flexible PROFINET cable
LEONI PROFINET rodent / outdoor / ground cable UV FC
60
61
61
61
Table of contents
Training
Certified PROFIBUS Engineer
Certified PROFIBUS PA Module
Certified PROFIBUS Installer
PROFIBUS Product Development
Troubleshooting & Maintenance
ProfiTrace Training
Certified PROFINET Engineer
PROFINET Technical Training
Services
62
64
65
66
67
68
69
70
71
72
73
74
75
Cross Reference
76
77
78
79
80
Notes
Training Dates
81
83
About PROCENTEC
PROCENTEC is an independent company,
concentrating all its products and services on
PROFIBUS and PROFINET technology. Our main
business is the export of in-house developed
automation products through our worldwide
distributor network. PROCENTEC is also providing
vendor independent training and support to endusers.
C ompetence center
PROCENTEC runs 1 of the 8 accredited test laboratories for the certification of PROFIBUS devices.
In our laboratory vendors can have their products
tested on PROFIBUS compatibility. We have a demonstration facility, which consists out of more than
250 devices from more than 40 vendors.
We develop in house PROFIBUS and PROFINET products that are being exported through our world wide
distributor network. Especially in the area of maintenance tools we have gained a unique market position.
Our innovative product portfolio is being used by our
own experts, which means perfect utilization for the end
customer.
Q uality management
S ummary
PROCENTEC Headquarters
Turfschipper 41
2292 JC WATERINGEN
The Netherlands
Email: info@procentec.com
Internet: www.procentec.com
PROFIBUS Tools
PROFIBUS is a proven standard in the industry. More
and more plants are completely equipped with
this outstanding technology. The management of
these enterprises is aware that the intelligence and
diagnostics of the instruments contribute to costs
savings and optimization of production automation. The
grey area is the knowledge level of the maintenance
technicians who need to work with this system. A lot of
times their know-how has reached the limit which leads
to a point that they see the installation as a black-box.
When a disturbance occurs, nobody knows what to do
and where to start A proper investment in tools is
required!
Troubleshooting and maintenance tools for PROFIBUS
had their own history and evolution. It started with the
simple busmonitors in the 90s (based on PC cards) to
the more advanced analyzers in the beginning of 2004
that were based on USB and could oer statistics for
an overview about the condition of the installation. A
giant leap forward is the incredible ProfiTrace 2. Finally,
analysis of the signal quality, busmonitoring, topology
scan, reporting and master activities can be carried out
simultaneously on the same USB hardware. The technician can check and troubleshoot the complete DP and
PA PROFIBUS network with 1 software package and 1
piece of hardware. An enormous reduction in equipment, weight, costs and required knowledge.
1m Rule on DP
Bad wiring
Spur lines on DP
No shield connection
Not-powered termination on DP
IP 65 problems on PA
ProfiTrace 2
PROFIBUS Troubleshooting & Maintenance Tool
ProfiTrace 2 is the most powerful analyzer for
PROFIBUS networks. It is the latest generation
in the line of busmonitor technology because it
combines all primary tools in one:
Busmonitor
Oscilloscope
Bar graph
Topology Scan
DP Master
Technicians can check and troubleshoot the
complete PROFIBUS network with 1 software
package and 1 piece of hardware. This is an
enormous reduction in equipment, weight, costs
and required knowledge. The advanced USB hardware (ProfiCore Ultra) is internally equipped with a
high-speed digital oscilloscope and able to capture bus
signals running at 12 Mbps.
ProfiTrace is an essential tool for maintenance, commissioning and troubleshooting as well as product development. Typical failures such as noise, reflections, voltage drops, termination problems, double addresses, wire
breaks and configuration faults are easily identified. Random errors such as overshoots, error telegrams, repeats
and diagnostics can also be captured and logged. The results can be exported to detailed reports which are
accepted by the industry. Predictive maintenance and asset management are really possible with ProfiTrace!
This outstanding tool that fits in your pocket, will boost the capabilities of service, maintenance and engineering
technicians.
P roduct features
A pplication areas
ng & Maintenance
ofTroubleshooti
PROFIBUS networks
S tatistics matrix
10
M essage recording
S copeWare (DP)
S copeWare (PA)
B ar graph
The bar graph is a helpful utility to get an impression of the overall signal quality of the network.
2 Selectable modes: Average signal level and
minimum dierence between 1 and 0.
Average, min. and max. signal level indicator.
Colours state the quality of the signals.
Can be sorted on: address and Voltage.
Continuously updated.
11
Topology scan
R eporting
We have proof..
The reporting feature creates a detailed report that contains
the signals of all devices, their faults, the network topology,
bar graph and administrative information.
Generation of detailed network reports.
Address list with manufacturer information.
Oscilloscope images of every device.
Live List, Bar graph and Topology structure.
Summary of detected errors.
Standard layout for signatures and approvals.
Import of company logo.
D P Master
P rofiCore Ultra
PROFIBUS
PROFIBUS baudrate max. 12 Mbps
Galvanic isolated PROFIBUS interface
Oscilloscope
Frequency: 2 x 192 MHz
Bandwidth: 100 MHz
Dierential measurement: -9 to +9 V
Single ended: -4,5 to +8 V
Others
High-speed USB 2.0 interface
External power supply possible if required
12
Order code
30020
ProfiCore Ultra
USB cable
ProfiTrace 2
(no oscilloscope, bargraph and topology scan function)
- can be upgraded later!
37021
ProfiCore Ultra
USB cable
ProfiTrace 2
ProfiTrace 2
ScopeWare
Bar graph
Topology Scan
Reporting
Tap Connector
Blue carrying case
Troubleshooting
Toolkit Ultra Plus
38022
ProfiCore Ultra
USB cable
ProfiTrace 2
ScopeWare
Bar graph
Topology Scan
Reporting
Tap Connector
Blue carrying case
Troubleshooting
Toolkit Ultra Pro
PA Probe Ultra
ProfiCaptain
OPC server
ScopeWare license
23010
ProfiCaptain license
22020
26010
101-00231B
Manual pack
18010
5 Paper manuals
Latest software CD
13
ProfiCaptain
PROFIBUS DP master platform
ProfiCaptain is a PC based DP
master that has been designed
for applications like: I/O tests,
commissioning, parameterization
and demonstrations. It makes
working with PROFIBUS a lot easier,
faster and more fun.
The platform is a configuration environment in which the user can setup
his slaves with the respective modules
and parameters. After setting up the
network, the user puts them online
without compilation or download.
The I/Os can simply be watched and
manipulated. If needed, class 2 functions can be used on all addresses in the network,
even if they are not configured or belong
to another master. ProfiCaptain is integrated
in ProfiTrace 2.
A pplication areas
P roduct features
14
P roduct specifications
Integrated in ProfiTrace 2.
Language: English.
Stealing slaves
Stealing slaves from other masters without removing
them from the bus or shutting the masters down.
Automatic detection of the busparameters
Detection of Tslot, MaxTSDR, Tset, etc.
Suggested master address.
Dynamic Live List.
All baudrates are supported (9,6 kbps..12 Mbps).
Prevention of accidental shutdowns.
I/O Testing
Watches and modification on selectable variables.
Automatic patterns (bit walks, zig-zags and counters).
Acyclical class 2 functions
Acyclical class 2 functions on all addresses.
Set Slave Address.
Read Inputs/Outputs (of every slave in the network).
Get Configuration.
Get Diagnostics.
Automatic identification of all the slaves in the network (address, product name and Ident Number).
Configuration
User friendly configuration software.
Easy network creation with advanced GSD import.
No shutdowns when updating the configuration.
Deactivating slaves in the configuration when they are
not required.
Product
Order code
ProfiCaptain
22020
15
Tap Connector
Dimensions: 76 x 33 x 12 mm
Weight: 25 g
Connector layout: PA+, PA- and Shield
It has been designed not to cause network disturbances due to spur lines. A perfect vertical position for
ProfiTrace is obtained that does not overpressure the
PG connector on the devices. The cable is of the flexible
type so it can be moved to all directions.
DC voltage: 0 to 33 V
PA signal: 1,2 Vtt
Input resistance: > 1 MOhm
Input capacitance: < 1 nF
Temperature: 0..70 C
Works with ProfiTrace version 2.2.1 and higher
Order code
14020
Order code
13020
16
ProfiCaptain EDU
ProfiTrace EDU and ProfiCaptain EDU are special editions of the famous ProfiTrace Analyzer and
ProfiCaptain DP master for technical schools and students. They perfectly close the gap between the lab
and the factory floor.
Order code
101-00401A
Order code
101-00411A
17
ProfiScript
Protocol test software
ProfiScript is a professional
PROFIBUS pre-certification tool that
can test and verify the complete
protocol functionality of DP, DP-V1
and PA devices.
The tool has enormous flexibility and
is the only tool available, which can
power-up/down devices by an external
intelligent power switch and has the
capability of remote testing over the
Internet. An implemented syntax interpreter can also test the GSD file.
A pplication areas
P roduct features
Pre-built scripts for DP and DP-V1 (including the complete test cases according to IEC 61158)
Quick and easy iteration of a testscript (including user commands)
Backward compatible with the old Siemens based test scripts
Selectable timestamping, details and framecount
Partial test (only a specified portion of the testcase)
Dynamically settable delays of individual messages
Manual sending of individual DP messages (SetParameters, SetSlaveAddress, GetDiagnostics, etc.)
Product
Order code
ProfiScript V2.0
24020
ProfiScript + ProfiCore 1
33020
15010
18
BT200
Check your work with this easy tester
The BT200 is a simple tool to verify the PROFIBUS DP cable
at the end of the installation phase. Installation errors can
be quickly detected without eort. No special knowledge
is required.
The BT200 is easy to handle. Attach the BT200 to the first
PROFIBUS connector and a test plug to the last PROFIBUS
connector. Press Test and the screen will display a fault or
OK message.
Remark: It can only be used when the installation is NOT running (non active masters)!
P roduct features
Product
Order code
BT200
40210
Charger
40211
230 V European.
40213
19
ProfiHub Family
ProfiHub A5, B5 and C5 are advanced, flexible
and robust network components for PROFIBUS
DP installations. They enable long multi-device
spur lines and backbone structures with star/tree
segments.
PROFIBUS DP is a high-speed communication bus that
has to comply with strict rules concerning spur lines,
because of possible reflections that could lead to communication disturbances. If spur lines or star segments
are required, costly investments in repeaters have to be
done.
Innovative components for such applications are the
ProfiHub A5 and B5. These are perfect economic solutions to implement reliable spur lines in high-speed
DP networks. They have the functionality of 5 isolated
transparent repeaters. This allows network structures
with extended spur lines that individually can handle a
maximum of 31 devices and a length equal to the main
bus.
The ProfiHub can be used as a barrier to keep the backbone and other channels clean
20
ProfiHub B5
ProfiHub C5
Classification
IP 65
IP 20
IP 65
Housing
Plastic
Metal
Metal
Mounting
Corner screws
DIN-rail
Corner screws
Weight
800 g
650 g
4800 g
Dimensions
213 x 210 x 95 mm
167 x 111 x 32 mm
PROFIBUS connectors
Hybrid PROFIBUS +
power connectors
Alternative connectors
No
No
Termination LEDs
No
Yes
Yes
Ground rail
Optional
Yes
Not required
21
ProfiHub A5
5 Channel DP spur repeater for IP 65
ProfiHub A5 is an advanced, flexible and robust network
component for PROFIBUS DP installations. It enables
long multi-device spur lines and backbone structures
with star/tree segments in IP 65 applications.
PROFIBUS DP is a high-speed communication bus
that has to comply with strict rules concerning spur
lines, because of possible reflections that could
lead to communication disturbances. If spurs or
star segments are required, costly investments in
repeaters have to be done.
The ProfiHub A5 is a perfect economic solution
to implement reliable spurs in DP networks. It has
the functionality of 5 galvanic isolated transparent
repeaters. This allows network structures with
extended spur lines that individually handle a maximum
of 31 devices and a length equal to the main bus.
Your benefits
A pplication areas
P roduct features
Product
Order code
16010
ProfiHub A5
16013
16011
16012
Pre-mounting of
M12 flange set
16010B
ProfiHub A5
(110V/230V)
Ground rail
23
ProfiHub B5
5 Channel DP spur repeater for IP 20
ProfiHub B5 is an advanced, flexible and robust network
component for PROFIBUS DP installations, to implement
long multi-device spur lines and backbone structures
with star/tree segments in IP 20 applications.
PROFIBUS DP is a high-speed communication bus that
has to comply with strict rules concerning spur lines,
because of possible reflections that could lead
to communication disturbances. If spur lines or
star segments are required, costly investments in
repeaters have to be done.
The ProfiHub B5 is a perfect economic solution to implement reliable spur lines in high-speed DP networks. It has the
functionality of 5 galvanic isolated transparent repeaters. This allows
network structures with extended spur lines that individually can handle a
maximum of 31 devices and a length equal to the main bus.
Your benefits
A pplication areas
24
P roduct features
R emarks
Product
Order code
17010
ProfiHub B5
25
ProfiHub C5
5 Channel DP spur repeater for IP 65
ProfiHub C5 is an advanced and robust network
component for PROFIBUS DP installations. It
enables long multi-device spur lines and
backbone structures with star segments
in rough and demanding IP 65
applications.
PROFIBUS DP is a high-speed communication bus that has to comply with
strict rules concerning spur lines, because
of possible reflections that could lead to
communication disturbances. If spur lines or
star segments are required, costly investments
in repeaters have to be done.
The ProfiHub C5 is a perfect solution to implement reliable
spur lines in high-speed DP networks. It has the functionality of 5
galvanic isolated transparent repeaters. This allows network structures
with extended spur lines that individually can handle a maximum of 31 devices
and a length equal to the main bus.
Your benefits
A pplication areas
26
P roduct features
Product
Order code
17015
ProfiHub C5
27
PROFIBUS DP
Repeaters and
Termination
PROCENTEC is manufacturer of first class PROFIBUS
network components, which are capable of making
your installation a lot more reliable. Let our product
specialists give you expert advice about which product is
best suitable for your application.
28
P roduct features
PROFIBUS specifications
Supports all PROFIBUS RS 485 protocols
(DP, DP-V1, DP-V2, FMS, PROFIsafe, PROFIdrive, MPI, etc.)
9,6 Kbps to 12 Mbps
Removable screw terminals and 1 DB9 connector
Power supply specifications
Operating Voltage: 19..28 Vdc
Current consumption: < 60 mA
Redundancy: Power 1 OR 2
Diagnostic LEDs to indicate the status of the power supply
Ambient conditions
Operating temperature: -20..+60 C
Dimensions and weight
Dimensions (LxWxH): 106 x 55 x 33 mm (without plugs)
Weight: < 125 g
Others
DIN-rail mounting
IP 20 classification (DIN 40 050)
Product
Order code
Terminator T1
101-00211A
29
Your benefits
P roduct features
Electrical
1 Isolated channel (2 segments)
Increased signal strength
31 devices per segment
1200 m cable length
No limit in cascading
Redundant power supply (19..28 Vdc)
Protocol
Transparent for all PROFIBUS DP protocols
9,6 Kbps to 12 Mbps (automatic detection)
Diagnostic LEDs to indicate the status of the bus
No address required
Mechanical
Integrated termination (switches)
Removable screw terminals and 1 DB9 connector
Din-rail / IP 20 classification (DIN 40 050)
Product
Order code
PROFIBUS Repeater B1
101-00201A
30
31
PROFIBUS DP
Connectors
Connecting PROFIBUS DP devices is relatively
straightforward since all nodes are typically daisy
chained together. The DB9 connector is the most
commonly used. PROCENTEC is distributing reliable
PROFIBUS connectors from Siemens, Lapp and Profichip.
They are diering slightly in design, quality and costs.
The Fast Connector (FC) types do not have screw
terminals inside, but cut themselves with a V-shape
knife in the insulation of the wires. When the
appropriate cable is used, it saves a lot of time during
assembly.
Let our product specialists give you expert advice about
which connector is best suitable for your application.
3
32
PROCENTEC
C - Products
Produ
uct
ctss and services
seerviicees catalog - issue 2010/2
2010
010/2
PROFIBUS DP Connectors IP 20
Siemens PROFIBUS DP IP 20
Connector (90)
Siemens PROFIBUS DP IP 20 FC
Connector (90)
Siemens PROFIBUS DP IP 20 FC
Connector (180)
Integrated inductors compensate the connection capacitance and small dips in the signal, which makes it a perfect connector for high speed applications.
The shielding clamps connect the shielding of the cable with the device ground.
PG socket
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 screw terminals for 1,5 mm2
wires (A-B in, A-B out)
Fast Connect
PG socket
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 FC terminals (A-B in, A-B out)
Fast Connect
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 FC terminals (A-B in, A-B out)
IP 20
15,8 x 64 x 35,6 mm (WxHxD)
40 g
IP 20
15,8 x 59 x 35,6 mm (WxHxD)
50 g
IP 20
15 x 57 x 39 mm (WxHxD)
40 g
Order code
40201
Order code
40202
Order code
40200
33
PROFIBUS DP Connectors IP 20
Lapp PROFIBUS DP IP 40 Connector
(90)
Lapp PROFIBUS DP IP 40 FC
Connector (90)
Because of its rugged metallic housing it has resistance against noise and connects the cable shielding with the
device ground.
PG socket
Metal case
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 screw terminals for wires up to
1,0 mm2 (A-B in, A-B out)
PG socket
Fast Connect
Metal case
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 FC terminals (A-B in, A-B out)
Metal case
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
4 screw terminals for wires up to
1,0 mm2 (A-B in, A-B out)
64 x 40 x 17 mm (WxHxD)
40 g
72 x 40 x 17 mm (WxHxD)
40 g
68 x 39,5 x 17 mm (WxHxD)
40 g
Order code
40302
Order code
40301
Order code
40305
34
PROFIBUS DP Connectors IP 20
Profichip PROFIBUS DP Diagnostic
FC Connector (90)
PG socket
Fast Connect
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
Status monitoring via LEDs
+31 x 65 x 15,8 mm (WxHxD)
PG socket
Fast Connect
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
Status monitoring via LEDs
+31 x 65 x 15,8 mm (WxHxD)
Fast Connect
Switchable termination resistor
Max. 12 Mbps
Cable diameter: 8 mm
Status monitoring via LEDs
Order code
PA003135
Order code
PA003121
Order code
PA003122
35
PROFIBUS Cable
PROCENTEC is distributing PROFIBUS DP and PA
cable from LEONI, Lapp and Siemens. Let our product
specialists give you expert advice about which product is
best suitable for your application. We can deliver cable
for all kinds of applications;
Standard/universal
Moving machine parts
Food industry
Ground/burial
Sunlight resistant
Halogen free
Rodent protection
Shipboard
EMC
Festoon
Robust
Heat/Fire resistant
If you cannot find the product youre looking for, try to
locate it on www.procentec.com.
36
PROFIBUS DP Cable
LEONI standard PROFIBUS cable
FC
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 8,0 mm
Weight: 75 kg/km
Colors: Violet (red/green)
Fast Connect: Yes
Construction: 1 x 2 x 0,64 mm
with fillers
Wire type: Solid conductor
Cable thickness: 8,0 mm
Weight: 75 kg/km
Colors: Violet (red/green)
Construction: 1 x 2 x 0,64 mm
Wire type: Standed
Cable thickness: 8,0 mm
Weight: 74 kg/km
Colors: Violet (red/green)
Bending: 7X , Single 5X
Temperature: -40..+80 C
Jacket/sheath: PVC
UL listing: CMG and CL3
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: No
Flame:
- IEC 60332-3-24 (Cat. C)
- UL 1685 (CSA FT 4)
Temperature: -40..+80 C
Jacket/sheath: PVC
UL listing: CMG and PLTC
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: Limited
Flame: IEC 60332-3-24 (Cat. C)
Temperature: -40..+80 C
Jacket/sheath: PVC
UL listing: CMG and CL3
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: Limited
Flame:
- IEC 60332-3-24 (Cat. C)
- UL 1685 (CSA FT 4)
Order code
L45467-G16-C185
Order code
L45467-G16-C145
Order code
L45467-G16-C375
37
PROFIBUS DP Cable
LEONI PROFIBUS DP ground cable
UV FC
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 10,8 mm
Weight: 117 kg/km
Colors: Black (red/green)
Fast Connect: Yes
Bending: 15X , Single 7,5X
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Shield:
- copper-tape longitudinal welded
- spiral corrugated
Cable thickness: 11,1 mm
Weight: 119 kg/km
Colors: Violet (red/green)
Fast Connect: No
Bending: 7,5x , Single 3,75x
Temperature: -40..+60 C
Jacket/sheath: PVC and PE
UL listing: No
Halogen free: No
Sunlight: Yes
Water/steam: Yes
Oil/grease: Limited
Flame:
- IEC 60332-3-24 (Cat. C)
- UL 1685 (CSA FT 4)
Order code
L45467-G16-C236
38
Temperature: -40..+70 C
Jacket/sheath: PVC
UL listing: No
Halogen free: No
Sunlight: Yes
Oil/grease: No
Flame: IEC 60332-1-2
Order code
L45467-G16-C355
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 10,8 mm
Weight: 129 kg/km
Colors: Black (red/green)
Temperature: -40..+70 C
Jacket/sheath: PVC and PE
UL listing: No
Halogen free: No
Sunlight: Yes
Oil/grease: Limited
Flame: No
Order code
L45467-G16-C276
PROFIBUS DP Cable
LEONI high temperature PROFIBUS
DP cable
Forced movement
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 7,2 mm
Weight: 64 kg/km
Colors: Violet (red/green)
Fast Connect: No
Bending: 7X , Single 5X
Temperature:
-50 C (-58 F) to +180 C (356 F)
Jacket/sheath: FEP
UL listing: No
Halogen free: No
Sunlight resistance: Yes
Resistance to oil/grease: Yes
Flame retardant: Exceptionally
Order code
L45467-G16-N17
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 8,8 mm
Weight: 87 kg/km
Colors: Grey (red/green)
Fast Connect: No
Temperature: -25..+70 C
Jacket/sheath: FRNC
UL listing: No
Halogen free: Yes
Sunlight resistance: No
Resistance to oil/grease: No
Flame retardant:
DIN VDE 0472, part 814, FE90
Order code
L45467-G16-C266
Temperature: -40..+80 C
Jacket/sheath: PUR
UL listing: CMX
Halogen free: No
Sunlight resistance: No
Resistance to oil/grease: Yes
Flame retardant: IEC 60332-1-2
Order code
L45467-G16-C98
39
PROFIBUS DP Cable
LEONI PROFIBUS DP food cable FC
Festoon applications
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 8,0 mm
Weight: 67 kg/km
Colors: Black (red/green)
Fast Connect: Yes
Construction: 1 x 2 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 8,0 mm
Weight: 71 kg/km
Colors: Violet (red/green)
Fast Connect: Yes
Construction: 1 x 2 x 0,64 mm
Wire type: Stranded conductor
Cable thickness: 8,0 mm
Weight: 64 kg/km
Colors: Petrol (red/green)
Fast Connect: No
Temperature: -40..+60 C
Jacket/sheath: PE
UL listing: No
Halogen free: No
Sunlight: Yes
Water/steam: Yes
Oil/grease: Limited
Temperature: -40..+60 C
Jacket/sheath: PUR
UL listing: CMX
Halogen free: No
Sunlight: Yes
Oil/greases: Yes
Flame: IEC 60332-1-2
Order code
L45467-G16-C246
Order code
L45467-G16-C118
Order code
L45467-G16-C255
40
Temperature: -40..+80 C
Jacket/sheath: PVC
UL listing: CMG and CL3
Halogen free: No
Sunlight: UL 1581 Sec.1200
Oil/grease: UL 758 Sec. 15 (60C)
Flame: UL 1685 (CSA FT 4)
An excellent tool for speeding up the assembly of the cable. It removes the
sheath and exposes the shielding with exact the length for the required plugs.
Order code
40209
Order code
40208
41
PROFIBUS PA Cable
LEONI standard PROFIBUS PA
cable
Construction: 1 x 2 x 1,0 mm
Wire type: Stranded conductor
Cable thickness: 8,0 mm
Weight: 100 kg/km
Colors: Black/blue (red/green)
Bending: 10X , Single 5X
Construction: 1 x 2 x 1,0 mm
Wire type: Solid conductor
Shield:
- copper-tape longitudinal welded
- spiral corrugated
Cable thickness: 11,1 mm
Weight: 129 kg/km
Colors: Blue (red/green)
Bending: 15X , Single 10X
Construction: 1 x 2 x 1,0 mm
Wire type: Solid conductor
Cable thickness: 8,0 mm
Weight: 103 kg/km
Colors: Black/blue (red/green)
Bending: 10X , Single 5X
Temperature: -20..+80 C
Jacket/sheath: PVC
UL listing: CMG and CL3
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: UL 758 Sec. 15
Flame:
- IEC 60332-1-2
- UL 1685 (CSA FT 4)
Order code
L45467-J20-C105 (black)
L45467-J20-C95 (blue)
42
Temperature: -40..+80 C
Jacket/sheath: PVC
UL listing: AWM
Halogen free: No
Sunlight: No
Oil/grease: No
Flame: IEC 60332-1
Order code
L45467-J21-C45 (black)
L45467-J21-C35 (blue)
Temperature: -25..+80 C
Jacket/sheath: PVC
UL listing: No
Halogen free: No
Sunlight: Yes
Oil/grease: 1581 Sec. 480 (60)
Flame: IEC 60332-1-2
Order code
L45467-J20-C135
43
PROFIBUS ASICs
PROCENTEC is distributing PROFIBUS DP and PA ASICs
from Siemens and Profichip. Let our product specialists
give you expert advice about which product is best
suitable for your application. We have experience with
the following ASICs;
SPC3
SPC3LV
SPC4
DPC31
LSPM2
SIM1-1
SIM1-2
VPC3+C
VPC3+S
VPCLS2
MPI12x
If you cannot find the product youre looking for, try to
locate it on www.procentec.com.
44
PROFIBUS ASICs
Siemens SPC3 Protocol ASIC
PROFIBUS Specifications
Supported protocols: DP, DP-V1
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: ASIC + CPU
PROFIBUS Specifications
Supported protocols: DP, DP-V1
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: ASIC + CPU
Hardware Specifications
Package: 44 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 5 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 1,4 kByte
Oscillator/crystal frequency: 48 MHz
Hardware Specifications
Package: 44 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 3,3 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 1,4 kByte
Oscillator/crystal frequency: 48 MHz
Software Specifications
Driver suppliers: PROCENTEC, Siemens
Indications: Exchange buers
Software Specifications
Driver suppliers: PROCENTEC, Siemens
Indications: Exchange buers
Order code
Order code
45
PROFIBUS ASICs
Siemens DPC31 Protocol ASIC
PROFIBUS Specifications
Supported protocols: DP, DP-V1, DP-V2, PA
Integration depth: Fully integrated slave
Baudrate:
- Max. 12 Mbps (RS 485)
- 31,25 kbps (MBP-IS)
Total product implementation:
ASIC + CPU or Single chip (integrated 8031)
PROFIBUS Specifications
Supported protocols: DP
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: Single chip
Hardware Specifications
Package: 100 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 3,3 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 5,5 kByte
Oscillator/crystal frequency:
- 12 MHz (DP)
- 4 MHz (Typical for PA)
I/O:
- SSC interface (SPI)
- 27 I/O points (if the integrated 8031 is used)
Hardware Specifications
Package: 80 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 5 V
Oscillator/crystal frequency: 48 MHz (12 Mbps)
I/O: 32 I/O points
Other: EEPROM or dipswitches can be used to set
the network address
Software Specifications
Driver suppliers: Siemens
Indications: Exchange buers
Order code
Order code
46
PROFIBUS ASICs
Siemens SPC4 Protocol ASIC
PROFIBUS Specifications
Supported protocols: DP, DP-V1, PA
Integration depth: Partially integrated slave
Baudrate:
- Max. 12 Mbps (RS 485)
- 31,25 kbps (MBP-IS)
Total product implementation: ASIC + CPU
Hardware Specifications
Package: 44 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 3,3..5 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 1,64 kByte
Software Specifications
Software driver suppliers: TMG-itec
Indications: Polling list
Order code
Pack of 5 SPC42 ASICs
6GK1-588-3AA00
Pack of 160 SPC42 ASICs
6GK1-588-3AA15
47
PROFIBUS ASICs
Siemens SIM1-1 PA/FF MAU
The SIM1 is an ASIC, which functions as a Medium Attachment Unit (MAU) for PROFIBUS PA or FF. It converts
Manchester coding to MBP-IS signalling and supplies power for the electronics of the complete product. This
ASIC can be placed beside a DPC31, SPC42 or other Manchester encoder/decoder.
PROFIBUS Specifications
Supported bus systems: PROFIBUS PA and Foundation Fieldbus
Baudrate: 31,25 kbps (MBP-IS)
PA bus voltage range: 9..32 V
Order code
Order code
48
PROFIBUS ASICs
Profichip VPC3+C Protocol ASIC
The Profichip VPC3+C protocol ASIC is totally dedicated for the use as PROFIBUS DP slave. It manages
layer 1 and 2 of PROFIBUS. It has to be operated
with a processor and protocol software.
PROFIBUS Specifications
Protocols: DP, DP-V1, DP-V2 (DxB + IsoM)
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: ASIC + CPU
PROFIBUS Specifications
Protocols: DP, DP-V1, DP-V2 (DxB + IsoM)
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: ASIC + CPU
Hardware Specifications
Package: 44 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 3,3 or 5 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 4 kByte
Oscillator/crystal frequency: 48 MHz (12 Mbps)
Others: Pin and function compatible with the
Profichip VPC3+S and Siemens SPC3 ASIC
Hardware Specifications
Package: 44 pin BGA (6x8 mm)
Temperature range: -40..+85 C
Supply Voltage: 3,3 V
Supported CPUs: Siemens, Intel, Motorola, etc.
External uP interface:
- Parallel 8 bits or
- Serial interface SPI / I2C
Dual port RAM buer size: 4 kByte
Oscillator/crystal frequency: 48 MHz (12 Mbps)
Others: Function and software compatible with the
VPC3+C and SPC3 ASIC
Software Specifications
Software driver suppliers: PROCENTEC
Indications: Exchange buers
Software Specifications
Software driver suppliers: PROCENTEC
Indications: Exchange buers
Order code
Order code
VPC3+S ASIC
PALF2009
49
PROFIBUS ASICs
Profichip VPCLS2 Protocol ASIC
PROFIBUS Specifications
Protocols: DP
Integration depth: Fully integrated slave
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: Single chip
PROFIBUS Specifications
Protocols: MPI, DP, DP-V1, DP-V2
(DxB + IsoM + CkS)
Integration depth: MPI Master,
Fully integrated slave (DP)
Baudrate: Max. 12 Mbps (RS 485)
Total product implementation: ASIC + CPU
Hardware Specifications
Package: 80 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 5 V
Oscillator/crystal frequency: 48 MHz (12 Mbps)
I/O: 32 I/O points
Others: EEPROM or dipswitches can be used to set
the network address
Hardware Specifications
Package: 44 pin PQFP
Temperature range: -40..+85 C
Supply Voltage: 3,3 or 5 V
Supported CPUs: Siemens, Intel, Motorola
External uP interface: Parallel 8 bits
Dual port RAM buer size: 4 kByte
Oscillator/crystal frequency: 48 MHz (12 Mbps)
Others:
- Pin compatibel with the Siemens SPC2 ASIC
- Bus monitor function
Software Specifications
Software driver suppliers: Profichip
Indications: Exchange buers
Order code
Order code
50
51
PROFINET Tools
PROFINET requires dierent measurement tools than
PROFIBUS. On an Ethernet network it is very hard
to do a measurement with an oscilloscope, because
there are NO standard connection points available
and a third-load is NOT recommended. To solve
these issues PROCENTEC deliveres solutions to enable
measurements on a PROFINET network.
52
P roduct features
Product
Order code
514-00011A
514-00021A
53
ProfiTap Industrial
PROFINET monitoring interface
ProfiTap Industrial is an interface to perform monitoring on
PROFINET networks. It is an essential tool for PROFINET
engineering activities, especially to verify the connections and
performance of IRT and other real-time applications.
The monitor port of switches is unreliable for monitoring; it
can be occupied or is not forwarding all trac. The load on
the Ethernet port of the laptop is also too high with IRT
applications because 2 channels are merged in one.
The ProfiTap has a USB link with the laptop that
streams the captured messages to the accompanying driver, which emulates an additional Ethernet
port on the laptop and hands the messages over to
any application.
The ProfiTap also prevents the laptop to send out
messages on its own initiative, which could jeopardize
the real-time behaviour and security of the network.
P roduct features
Product
Order code
ProfiTap Industrial
513-00011A
54
ProfiTap
USB cable
Hookup cable
Software and drivers
Manual
55
PROFINET
Connectors
Oce automation has long set the standards for
Ethernet cable and connectors. These standards also
provide the basis for Industrial Automation networks.
However the demands on cable and connectors go far
beyond the limits of oce automation when it comes
down to mechanical, chemical and electromechanical
stress.
PROCENTEC is distributing reliable PROFINET connectors
from Lapp and Siemens. The Fast Connector (FC) types
do not have screw terminals inside, but cut themselves
with a V-shape knife in the insulation of the wires. When
the appropriate cable is used, it saves a lot of time
during assembly.
Let our product specialists give you expert advice about
which product is best suitable for your application.
56
PROFINET Connectors IP 20
Siemens PROFINET IP 20 FC
Connector (180)
Siemens PROFINET IP 20 FC
Connector (90)
90 RJ45 plug
4-wire + Shield for FC cables
100 Mbps
IP 20
13,7 x 16 x 55 mm (WxHxD)
35 g
13,7 x 16 x 42 mm (WxHxD)
35 g
Order code
502-02011A
Order code
502-02021A
Order code
40310
57
PROFINET Connectors IP 20 / 67
Siemens M12 PROFINET IP 67 FC
Connector (180)
General
Connector: 180 M12 D-coded
Rugged metal housing
Terminals: 4-wire + Shield
Terminal layout: Y=1, O=3, W=2, B=4
Fast Connect (FC): Yes
Baudrate: 100 Mbps - Cat 5e
Cable length: Max. 100 m
Cable diameter: Max. 6,5 mm
Wire diameter: Max. 0,75 mm
General
Connector: 180 RJ45 plug
Terminals: 8-wire + Shield for
Industrial Ethernet FC cables
Fast Connect (FC): Yes
Baudrate: 100 / 1000 Mbps
Wire diameter: 24 AWG
Cable length: Max. 100 m
Ambient conditions
Isolation class: IP 67
Ambient conditions
Temperature: -20..+70 C
Storage temperature: -40..+80 C
Relative humidity: < 95 %
Isolation class: IP 20
Order code
502-02031A
Order code
502-02041A
58
59
PROFINET Cable
Oce automation has long set the standards for
Ethernet cable and connectors. These standards also
provide the basis for Industrial Automation networks.
However the demands on cable and connectors go far
beyond the limits of oce automation when it comes
down to mechanical, chemical and electromechanical
stress.
In contrast to 8-wire Ethernet cable, PROFINET uses a
4-wire robust quad cable. The electrical performance is
optimised for 100Base-Tx and shielded against interference. PROCENTEC is distributing suitable PROFINET
cable from LEONI, Lapp and Siemens.
Let our product specialists give you expert advice about
which type is best suitable for your application.We can
deliver cable for all kinds of applications;
Standard/universal
Moving machine parts
Food industry
Ground/burial
Sunlight resistant
Halogen free
Rodent protection
Shipboard
EMC
Festoon
Robust
Heat/Fire resistant
If you cannot find the product youre looking for, try to
locate it on www.procentec.com.
60
PROFINET Cable
LEONI standard PROFINET cable FC
Flexible installation
Construction: 4 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 6,5 mm
Weight: 66 kg/km
Sheath: Green (WH-YE-BU-OG)
Fast Connect: Yes
Bending: 7,5X , Single 3X
Construction: 4 x 0,75 mm
Wire type: Stranded
Cable thickness: 6,5 mm
Weight: 67 kg/km
Sheath: Green (WH-YE-BU-OG)
Fast Connect: No
Bending: 7X , Single 3X
Construction: 4 x 0,64 mm
Wire type: Solid conductor
Cable thickness: 9,3 mm
Weight: 124 kg/km
Sheath: Black (WH-YE-BU-OG)
Fast Connect: Yes
Bending: 10X , Single 5X
Temperature: -40..+75 C
Jacket/sheath: PVC
UL listing: CMG and PLTC
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: Limited
Flame:
- IEC 60332-1-2
- UL 1685 (CSA FT 4)
Temperature: -40..+70 C
Jacket/sheath: PVC
UL listing: CMG and PLTC
Halogen free: No
Sunlight: UL 1581 Sec. 1200
Oil/grease: Limited
Temperature: -40..+70 C
Jacket/sheath: PVC and PE
UL listing: No
Halogen free: No
Sunlight: Yes
Oil/grease: Limited
Flame retardant: No
Order code
L45467-J16-B35
Order code
L45467-J17-B15
Order code
L45467-J16-B56
61
Training
Although PROFIBUS and PROFINET are well
established and easy to handle technologies,
training is essential when you are involved in and
making a business with this advanced automation
technology. It gives you confidence and you will
have fun implementing and using it.
Training makes your job less stressful, especially for
the plant-owners, which are able to communicate with
the contractors so they know what is going on and get
less unwanted surprises afterwards. During the training
courses you can also talk with the instructors about your
personal situation and get advice about the best way to
proceed.
Projects will be executed much faster with a high success rate when people have practical knowledge about
cabling, configuration and the most common mistakes
that happen. Testing, commissioning and troubleshooting are carried out much more eciently because
you get experience with the available tools and awareness about the strategy where to start. Training saves on
costs and gains money on a short and long term. It also
creates technicians which are more aware of modern
technology.
PROCENTEC is very successful with its training program.
We oer dierent types of PROFIBUS and PROFINET
training modules which are organised on a regular basis.
62
Target Audience
P rerequisites
O ther information
63
Topics
Basics
Token passing
Masters and slaves
Baudrates
Message formats
SAPs
RS 485 technology
Electrical specifications
Topology
Termination
Cable specifications
Connectors
Repeaters
DP/DP couplers
Grounding and shielding
Measurement tools
Handheld tools
Busmonitors
Oscilloscopes
Bus parameters
Tslot, Max_TSDR, etc
Watchdog and HSA
Repeats
Min_Slave_Intervall
DP technology
Diagnosis, Parameters and
Configuration
Sync and Freeze
GSD files
Cyclic and acyclic
Practical exercises
Creating networks with the help of
configuration tools
Using ProfiTrace
(Live List, logging, analyzing)
Setting bus parameters
Class 2 functions
Generating and reading diagnostics
Troubleshooting
(double address, faulty configuration, etc.)
And many more subjects......
PROFIBUS plays a primary part in industrial automation and in most cases Certified Engineers are the only ones who
can carry out the project. Through the valuable Certified Engineer status, companies and its employees can distinguish themselves from the other companies who are involved with this technology.
Method:
Duration:
Price:
Internet:
64
Topics
Method:
Duration:
Price:
Internet:
Network components
Connectors
Junction boxes.
Explosion safety
DP-V1
Parameters and profiles
The structure of cyclical read
and control values
Status value
Profile GSD files
Parameter sets
FDT/DTM/DDL
Practical exercises
Creating networks with
configuration tools
Setting parameters at
instruments
Generating and reading
diagnostics
Measurements with an
oscilloscope
Using ProfiTrace and the
PA Probe
Calulating currents and voltages
And many more subjects......
65
Topics
PROFIBUS technology
Masters and slaves
Token passing
Baudrates
Addressing
DP and PA
Transmission technology
Impedance
Delay times
Attenuation
Skin eect
Reflections
Method:
Duration:
Price:
Internet:
66
Topics
Software drivers
Galvanic isolation
Grounding and shielding
Connectors
GSD files
Target Audience
Method:
Duration:
Price:
Internet:
Theory + demonstrations
2 Days
EUR 995,- per person
Please contact us for an on-site training
www.procentec.com/training/profibus-product-development
67
Topics
Theory
Technology of PROFIBUS DP and PA
RS 485 and MBP-IS characteristics
Cabling techniques
Grounding and shielding
Repeaters and Hubs
DP/PA segment couplers
Strategy of fault finding
Method:
Duration:
Price:
Internet:
68
ProfiTrace Training
Mastering the most popular PROFIBUS Tool
This FREE training is fully concentrated on
ProfiTrace 2. The main goal is to master the
ProfiTrace platform to be able to quickly
identify what is a good and what is a bad
network?
In a full day the participants will learn how
to use ProfiTrace in order to analyse, localise
and solve PROFIBUS faults. With a hands-on
approach the participants will put theory into
practice.
This training does NOT cover cabling rules,
grounding, PLC programming and other related
subjects. For these you have to register for a
Troubleshooting class or the Certified PROFIBUS
Engineer class.
Topics
Theory
Structure of the ProfiTrace software
Structure of the ProfiCore Ultra and PA Probe
Contents of the Troubleshooting Toolkits
Software installation procedure and upgrades
License structure
Connecting the ProfiCore to a network
Live List (colours, ident numbers, names)
The definition of statistics (retries, syncs, lost, etc.)
Measurement principle of the Bar graph and the
Topology scan
Oscilloscope (termination problems,
short circuits, noise, AC/DC)
Practical exercises
Installing the software and license
Installing GSD files
Live List and statistics
Recording messages
Triggering, capturing and filtering
Saving and exchanging files
Oscilloscope and Bar graph
Generating reports
Generating the network topology
I/O and device testing with ProfiCaptain
Network manager
Method:
Duration:
Price:
Internet:
Theory + demonstrations
1 Day
FREE
Please contact us for an on-site training (on-site sessions will be invoiced)
www.procentec.com/training/profitrace
69
Topics
PROFINET Basics
Device types
RT, IRT, IO and CBA
Addressing
Performance and cycle times
Configuration steps
GSD files
Ethernet overview
Frame structure
MAC and TCP/IP addresses
Switches
Cabling guidelines
Cable types and connectors
IWLAN and Fibre Optic
Method:
Duration:
Price:
Internet:
70
PROFINET IO technology
Setting Device Names and IP
addresses
Watchdog
Messages
Send cycles
Hardware and software of a
PROFINET device
Others
Certification of devices
Available tools
Cost/technology comparison
Peek in the future
Practical exercises
Assembling connectors
Testing cables
Configuring switches
Analysing messages
Configuring a PROFINET
installation
Integrating a PROFIBUS segment
with a proxy
Topics
Introduction
Current PROFIBUS situation
Development of PROFINET
Application area of PROFINET
Peek in the future
PROFINET Technology
Device types
RT, IRT, IO and CBA
Addressing
Performance
Proxies
Configuration steps
GSD files
Method:
Duration:
Price:
Internet:
Demonstrations
Configuring installations
Integrating PROFIBUS
Testing an installation
Analysing messages
Assembling a connector
Exchanging devices
Theory + demonstrations
1 Day
EUR 195,- per person
EUR 1600,- per group of max. 20 (travel costs excluded)
www.procentec.com/training/profinet-tech-training
71
Services
We are an international PROFIBUS and PROFINET
Competence Center with all the required expertise
available to realize our projects and services. We have
the availability of some real experts whose knowledge
makes us unique in the world. Because of our international recognition we are often contracted for projects,
in Europe and abroad and oer a wide range of commercial services (consultancy, training, engineering,
commissioning, maintenance and troubleshooting).
PROCENTEC runs 1 of the 8 accredited test laboratories for the certification of PROFIBUS devices. In our
laboratory vendors can have their products tested on
PROFIBUS compatibility. We have a demonstration
facility, which is used for support, training, demonstrations, engineering and trade fairs. It consists of more
than 250 devices from more than 40 vendors. The
vendors have provided the equipment for marketing
and technical purposes. This co-operation generates a
synergetic eect that enables innovative solutions for
our clients.
72
We have a team of experienced engineers and testers to support the client. We test the device according to standardized test specifications, but also give recommendations and advice about the device on end-user level. We can
also support the client at the start of the development with consulting services, protocol stacks, product development, development tools and even ASICs.
Sometimes we discover errors in the hardware or software of the device. In those cases we try to solve the error
at our location to save precious time for the client. Its our strategy to support the client as much as possible. If
an engineer is present during the testing, he has the opportunity to benefit from the knowledge of the experts
at PROCENTEC. We have all kinds of components (ASICs, active and passive components) on stock, soldering/desoldering equipment and specialised personnel who can do hardware adjustments for the client. The necessary
equipment is available to update EPROMs or Flash.
Test sequence
Schematic check
Protocol and software test
Multi-vendor test/Interoperability test
Hardware and electrical test
GSD file check
Manual check
ASIC example
Simple DP slave
LSPM2
2 days
Standard DP slave
SPC3, VPC3+C
3 days
DP-V1 slave
4 days
PA field instrument
DPC31, SPC4
6 days
73
Installation Certification
The third eye on your installation
An installation certification is a quality assurance
for plant-owners that the PROFIBUS and/or
PROFINET installation complies to the standard
and is working properly before it is being put into
commission. By means of procedural checklists,
we will verify that the installation functions
according to the functional specifications.
The results of the certification are written down in
a detailed test report. PROCENTEC has been doing
installation audits for a couple of years now. This
activity has boosted the success rate for a lot of
projects.
Your benefits
Validation by experts
Check their work
Check your work
Advice and training
Tips and Tricks
Detailed reporting
Test sequence
Cabling rules
Terminating resistors
Signal quality and noise levels
Protocol quality
Busparameters
Cycle time and watchdog
Power supplies
Current consumption per segment (PA)
Voltage level per segment (PA)
Voltage level on the last instrument (PA)
74
On-site Troubleshooting
Let the experts fix your problems
We can be contracted for onsite emergency
troubleshooting based on standard fees. In
most cases an engineer can be made available
within 8 hours. All the tools are at our disposal
to work as ecient as possible: busmonitors,
scopes, analyzers, service and diagnostic
software.
We can be called in for consultancy and project
support concerning all PROFIBUS and PROFINET
matters. Because of the international quality recognition we are often contracted for medium and
large-scale projects, in Europe and abroad. From the
planning phase up to the commissioning phase, we
can assist integrators, end-users and plant owners
with their projects.
F ees
EUR 125,-*
EUR 85,-*
EUR 0,75
EUR 60,-*
1-on-1
Remarks
*) Outside oce hours, special fees apply.
Our oce hours are from Monday till Friday from 8.00 AM to 6.00 PM.
Prices are VAT excluded.
Kilometers are calculated company-return company.
75
Cross Reference
Order code
Page
6ES7-195-0BA02-0XA0
6ES7-195-0BA12-0XA0
6ES7-195-0BA22-0XA0
6ES7-195-0BD04-0XA0
6ES7-195-0BD14-0XA0
6ES7-195-0BF02-0XA0
6ES7-195-0BF12-0XA0
6ES7 195-0BG00-0XA0
6ES7 195-0BG10-0XA0
46
46
46
45
45
46
46
45
45
6GK1-588-3AA00
6GK1-588-3AA15
6GK1588-3BA16
6GK1588-3BA20
6GK1588-3BB02
47
47
48
48
48
101-00201A
101-00211A
101-00231B
101-00401A
101-00411A
30
29
13
17
17
502-02011A
502-02021A
502-02031A
502-02041A
513-00011A
514-00011A
514-00021A
57
57
58
58
54
53
53
13020
14020
15010
16010
16010B
16011
16012
16013
17010
17015
18010
16
16
18
23
23
23
23
23
25
27
13
22020
23010
24020
26010
13, 15
13
18
13
30020
33020
37021
13
18
13
76
Order code
Page
38022
13
40200
40201
40202
40208
40209
40210
40211
40213
40301
40302
40305
40310
33
33
33
41
41
19
19
19
34
34
34
57
L45467-G16-C98
L45467-G16-C118
L45467-G16-C145
L45467-G16-C185
L45467-G16-C236
L45467-G16-C246
L45467-G16-C255
L45467-G16-C266
L45467-G16-C276
L45467-G16-C355
L45467-G16-C375
L45467-G16-N17
L45467-J16-B35
L45467-J16-B56
L45467-J17-B15
L45467-J20-C95
L45467-J20-C105
L45467-J20-C135
L45467-J21-C35
L45467-J21-C45
39
40
37
37
38
40
40
39
38
38
37
39
61
61
61
42
42
42
42
42
PA002002-6
PA002002-66
PA002002-660
PA003121
PA003122
PA003135
PA007062
PA007064
PALF2003-6
PALF2003-96
PALF2004-6
PALF2004-96
PALF2009
50
50
50
35
35
35
49
50
49
49
50
50
49
77
78
79
80
Notes
81
Notes
82
Training Dates
Certified PROFIBUS Engineer
14 - 17 June 2010
Wateringen (Netherlands)
5 - 9 July 2010
Karlsruhe (Germany)
19 - 23 July 2010
Singapore
Wateringen (Netherlands)
6 - 7 July 2010
Singapore
12 - 14 July 2010
Karlsruhe (Germany)
20 - 21 July 2010
Wateringen (Netherlands)
Karlsruhe (Germany)
21 - 23 June 2010
Wateringen (Netherlands)
22 - 24 September 2010
Singapore
Wateringen (Netherlands)
Singapore
25 - 26 May 2010
Karlsruhe (Germany)
26 - 28 May 2010
Beijing (China)
27 - 28 July 2010
Wateringen (Netherlands)
Wateringen (Netherlands)
ProfiTrace Training
26 April 2010
Wateringen (Netherlands)
30 April 2010
Karlsruhe (Germany)
15 June 2010
Singapore
24 June 2010
Wateringen (Netherlands)
83
PROCENTEC BV
The Netherlands
Turfschipper 41
2292 JC WATERINGEN
The Netherlands
PROCENTEC GmbH
Germany
Haid-und-Neu-Str. 7
76131 Karlsruhe
Germany
84