ZXUR 9000 UMTS (V4.12.10) Radio Netk Controller Radio Paramenter Reference - 522769

Operator
LOGO
ZXUR 9000 UMTS Radio Parameter

Version: RNCV4.12.10
Document Title
Introduction
1, Manual Description
This document lists and gives information about ZTE UMTS Radio Network Parameters. It contains the description of the parameter,
such as name, unit, value, range, default value, OMC Access path and etc.
2, Structure
Sheet of Radio Parameters gives information for all parameters.
The following information is presented for each parameter in Radio Parameters Sheet.
3, Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Column Name In Radio Network

Parameters sheet
Column Description
Managed Object
Managed object class the parameters belongs to.
Logical Name
Parameter Name defined in Managed Object
3GPP Name
Parameter name which is defined in 3GPP
3GPP Protocol
Indication which 3GPP protocol defines the parameter
GUI Name
OMC GUI name of the parameter
Parameter Description
A brief introduction of the parameter
Instance
The instance for which the parameter is configured.
Related FG
The Feature Guide Doc in which the parameter is introduced
Value Range and Step
The value range and step of the parameter
Unit
The value unit of the parameter
Default Value
The default value, as initially set by the system, if not explicitly set at MO creation.
Related Parameters
The related parameters
Restriction with Related Parameters
Define the relationship with the related parameters
TYPE
The parameter is divided into the following four category:

Fixed: the parameter value can be set default and need not adjust normally;
Fixed-keep monitoring: the parameter value can be initially set default and adjust later according to network
performance;
Network Planing&Optimization: the value is set according to Network planning and optimization;
Don't Care: the parameter need not care ;
Negotiation With CN
Indication whether the parameter should negotiate with core network setting
Function Switch
Indication whether the parameter is a switch parameter
Configuration Rule and Adjustment SugA brief configuration rule introduction for the parameter
ZTE Confidential Proprietary
Default Value Configuration Reason
The reason for the default value setting
Change take effect
Indicate when the new value will take effect after the parameter value is modified
Service or node impact
Indicate whether the service or node is affected when the parameter valued is modified
Equipment Impaction Level
The equipment impaction when the parameter value is modified can be divided into four level according to the object
impacted
0: indicate no impaction when the parameter is modified
1: indicate impaction on the cell when the parameter is modified
2: indicate impaction on the nodeb when the parameter is modified
3: indicate impaction on the RNC when the parameter is modified
Service Impaction Level
The service impaction when the parameter value is modified can be divided into four level
0: indicate no impaction on the active user and idle user when the parameter is modified
1: indicate impaction on the idle user but no impaction on the active user
2: indicate no impaction on the idle user and impaction on the active user. The ongoing service will interrupt but the
service can be resume in short time (60s) for example the user can reinitialize the service at once;
3: indicate impaction on the idle user and the active user. The network service will interrupt for some time and will
resume later
How to Impact
The detail description of the impaction after the parameter value is modified
Access
Indication whether the parameter can be read (Read), written (Write) or modified after created (Restricted)
OMC Access path
Path for how to Access the parameter in OMC
Parameter Modifying Version
Whether this parameter is modified in this version
Parameter Modifying Detail
Modification details of this parameter in this version
Introduction
2/1164
Abbreviation
Managed Objects
ManagedElement
Managed Element
URncFunction
UMTS Logical Function Configuration
URncInfo
Extended Info of RNC
UQosFunction
QOS Function
UBasPri
Qos Basic Configuration
USchPriMappingProfile
Scheduling Priority Mapping

Relationship Profile
USchPriMapping

Relationship
UAppPriMappingProfile
Application Priority Mapping

UAppPriMapping

Relationship
UBPriAcProfile
Access Control Profile Related to Basic

Priority
UBPriAc
Access Control Related to Basic Priority
UTbTypeProfile
Transport Bearer Type Profile Related

to Basic Priority
UTbType
Transport Bearer Type Related to Basic

Priority
UDedSrvTbProfile
Dedicated Service Transport Bearer

Qos Profile
UDedSrvTb
Dedicated Service Transport Bearer

Qos Configuration
UPlmnSpecFunction
Plmn Specific Function
UBasPriMapping
Basic Priority Mapping Relationship
UDpiDrbc
Dynamic Radio Bearer Control

Information of DPI Service
USrvBasedHo
Handover Configuration Based on

Service
UIuCnst
Iu Interface Timers and Constants

Information
UCnInfo
CN NAS System Information
ULogicalRnc
Logic RNC Configuration
ULogicalCell
Logic Cell Configuration
ULogicalIubLink
Logic Iub Link Configuration
ULogicalIurQos
Qos Configuration Related to Logical Iur

Link
UMbmsSa
MBMS Service Area Configuration
UMbmsPLFreq
MBMS Preferred Frequency Layer

Configuration
UMbmsNPLFreq
MBMS Non Preferred Frequency Layer

Configuration
USnac
LAC and SNAC Information
UHspa
Hspa Configuration
UCommEdch
Common EDCH Configuration
UDrbcProfile

Information Profile
UDrbc

Information
UMbms
MBMS Configuration
UDpiBasPriMapping
DPI Basic Priority Mapping Relationship
UImsiSnacFilter
User Authorized PLMN+SNAC

Information
UMR
MR Configuration
UGloAc
Global Access Control Information
UUeCnst
UE Timers and Constants Information
UAppSrvType
Application Service Type Configuration
UQChat
QChat Service Configuration
UWhiteImsiList
User Configuration in White List
UDtxDrxProfile
UE DTX/DRX Profile
UDtxDrx
UE DTX/DRX Configuration
USrvFunction
Service Function
USubSrv
Service Basic Configuration
USrvPcProfile
Power Control Profile Related to

Service
USrvPc
Power Control Related to Service
USrvDivPc
Power Control Related to Service and

Diversity Mode
UWhiteSrvPc
Power Control Related to Service for

White List
UTrvMeasProfile
Traffic Volume Measurement Profile
URachEvtUeTrv
UE Traffic Volume Event Measurement

Configuration for RACH
URachPrdUeTrv
UE Traffic Volume Period Measurement

Configuration for RACH
UFachEvUpTrv
UP Traffic Volume Event Measurement

Configuration for FACH
UDchEvUeTrv
UE Traffic Volume Event Measurement

Configuration for DCH
UDchEvUpTrv
UP Traffic Volume Event Measurement

UDchPrdUeTrv
UE Traffic Volume Period Measurement

UDedSHsdschEvUpTrv
UP Traffic Volume Measurement

Configuration Number for Streaming
Class on HS-DSCH
UDedIBHsdschEvUpTrv

Configuration for Interactive and
Background Class on HS-DSCH
UComHsdschEvUpTrv

Configuration for HS-DSCH in
CELL_FACH
UETTIEdchEvUpTrv
UP Throughput Event Measurement

Configuration for E-TTI Switching
UDedEdchEvUpTrv

Configuration for E-DCH
UComEdchEvUpTrv

Configuration for E-DCH in
CELL_FACH
UEdchtoDchUpTrv
E-DCH Throughput Measurement

Configuration for HS-DSCH/E-DCH to
HS-DSCH/DCH Switching
UIntraMeasProfile
Intra-frequency Measurement Profile
UIntraMeasSrvSpec
Intra-frequency Measurement
Configuration Related to Traffic
Category
UIntraEcNoEvMeas
UEIntra-frequency Event Measurement

Configuration for CPICH Ec/No
UIntraRscpEvMeas
UEIntra-frequency Event Measurement

Configuration for CPICH RSCP
UIntraMeasNoSrvSpec
Intra-frequency Measurement
Configuration Unrelated to Traffic
Category
UIntraEcNoPrdMeas
UEIntra-frequency Period Measurement

UIntraRscpPrdMeas
UEIntra-frequency Period Measurement

UIntraEcNoEvMeasForD
Detected Set Measurement

UIntraRscpEvMeasForD

UInterMeasProfile
UE Inter-frequency Measurement
Profile
UInterMeaSrvSpec
Inter-frequency Measurement
Configuration Related to Traffic
Category
UInterEcNoEvMeasforU
UE Inter-frequency Event Measurement

Configuration for CPICH
Ec/No(UTRAN)
UInterRscpEvMeasforU

RSCP(UTRAN)
UInterEcNoEvMeasforG

Configuration for CPICH Ec/No(GSM)
UInterRscpEvMeasforG

Configuration for CPICH RSCP(GSM)
UInterEcNoEvMeasforE

Ec/No(EUTRAN)
UInterRscpEvMeasforE

RSCP(EUTRAN)
UInterMeasNoSrvSpec
Inter-frequency Measurement
Configuration Unrelated to Traffic
Category
UInterEcNoPrdMeas
UEInter-frequency Period Measurement

UInterRscpPrdMeas
UEInter-frequency Period Measurement

URatMeasProfile
Inter-RAT Measurement Profile
URatMeasSrvSpec
Inter-RAT Measurement Configuration

Related to Traffic Category
URatEcNoEvMeasforG
UE Inter-RAT Event Measurement

Configuration for CPICH Ec/No(GSM)
URatRscpEvMeasforG

Configuration for CPICH RSCP(GSM)
URatEcNoEvMeasforE

Ec/No(EUTRAN)
URatRscpEvMeasforE

RSCP(EUTRAN)
URatMeasNoSrvSpec
Inter-RAT Measurement Configuration

Unrelated to Traffic Category
URatEcNoPrdMeas
UEInter-RAT Period Measurement

URatRscpPrdMeas
UEInter-RAT Period Measurement

UUeIntMeasProfile
UE Internal Measurement Profile
UAmrEvtTPUeInt
UE Transmitted Power Event

Measurement Configuration for AMR
UPsEvtTPUeInt

Measurement Configuration for PS
UHoEvtTPUeInt

Measurement Configuration for
Handover
UPrdRttUeInt
UE Rx-Tx Time Difference Period

Measurement Configuration for
Location
UEvtRttUeInt
UE Rx-Tx Time Difference Event

Measurement Configuration for UTRAN
URlEvtRttUeInt
UE Rx-Tx Time Difference Event

Measurement Configuration for RL
Timing Adjustment
UPwrLimTPUeInt
UE Transmitted Power Event Report for

Power Limitation Judgement
UNbComMeasProfile
NodeB Common Measurement Profile
UNbComMeas
NodeB Common Measurement

Configuration
UNbDedMeasProfile
NodeB Dedicated Measurement Profile
UNbDedMeas
NodeB Dedicated Measurement

Configuration
UGbrResLimitProfile
Limiting HSDPA GBR Resource

Consumption Profile
UGbrResLimit

Consumption Configuration
UCfnOffset
CFN Offset Configuration
ULocationArea
Location Area Configuration
URoutingArea
Routing Area Configuration
UServiceArea
Service Area Configuration in CS+PS

Domain
UServiceAreaBc
Service Area Configuration in BC

Domain
UUtranRegArea
UTRAN Registration Area
UIubLink
Iub Link Configuration
UIurLink
Iur Link Configuration
UUtranCellFDD
UTRAN Cell
UCelInfoFDD
Extended Info of UTRAN Cell
UUtranRelation
Neighbouring Cell
UGsmRelation
GSM Neighbouring Cell
UEUtranRelation
EUTRAN Neighbouring Cell
UENbrBlkList
Eutran Neighbouring Cell Black List
UAich
AICH Configuration
UPrach
PRACH Configuration
USccpch
SCCPCH Configuration
UPich
PICH Configuration
UMich
MICH Configuration
UScpich
SCPICH Configuration
UCelSel
Cell Selection and Reselection

Information
UPriSel
Cell Reselection Frequency and Priority

Information
UCHspa
Hspa Configuration In A Cell
UCMbms
MBMS Configuration In A Cell
UEFach
EFACH Configuration
UPlBal
Load Balance Information
ULdCtrl
Load Control Information
UCMR
Cell MR Configuration
UExternalRncFunction
External RNC Function
UExternalUtranCellFDD
External UTRAN Cell
UExternalGsmCell
External GSM Cell
UExternalENBFunction
External ENodeB Function
UExternalEUtranCellFDD
External EUTRAN Cell FDD
UExternalEUtranCellTDD
External EUTRAN Cell TDD
UCNPoolRoutingFunction
CS/PS Pool Routing Function
UIDNNSRouting
Configuration of IDNNS route to Cs/Ps

Pool
UIMSIRouting
Configuration of IMSI route to Cs/Ps

Pool
UImeiBlkList
Imei for Black List
UImeiTacSPID
Imei TAC List for SPID
UDePri
RAN Priority When UE in Dedicated

State
UMPOProfile
HS-PDSCH Measurement Power Offset

Profile
UMPO
HS-PDSCH Measurement Power Offset

Configuration
Description
This managed element needs to be configured with a
netwrok element (such as single module XX, and dualmodule XX+YY).
This managed element indicates the parent node of
RNC functional configuration. It needs to be
configured with protocol parameters.
This managed element indicates the extended
information of RNC.
This managed element indicates the virtual node of

Qos function.
This managed element indicates the parameter

configuration information related to basic priorities.
This managed element indicates the profile of

scheduling priority.
This managed element indicates the configuration

information of scheduling priority.

application priority.

information of application priority.
This managed element indicates the access control

profile related to basic priorities.
This managed element indicates the access control

relationship related to basic priorities.
This managed element indicates the profile of transport

bearer types and I/B transport preserved bandwidth
that are related to basic priorities.
This managed element indicates the transport bearer
types and I/B transport preserved bandwidth that are
related to basic priorities.
dedicated services and transport Qos configuration.
This managed element indicates the corresponding

relationship between dedicated services and Qos
configuration.
This managed element indicates the common PLMN
information shared with this RNC. It is a virtual node of
radio services.
This managed element indicates the mapping
relationship among ARP, THP, Traffic Class, and basic
priorities.
This managed element indicates the Dynamic Radio
Bearer Control (DRBC) policy of DPI application
services related to PLMN.
This managed element indicates the handover policy
based on services when network elements are under
the single-module and dual-module conditions.
This managed element indicates the Iu-interface timers
and constants information related to PLMN.
This managed element indicates the CN NAS

information related to PLMN.
This managed element indicates the global RNC

configuration information related to PLMN.
This managed element indicates such information as

the DSAR parameter in a cell related to PLMN, and the
Qos priority index.
This managed element indicates such information as
the CE parameter in a Node B related to PLMN, and
the Qos index transmitted.
This managed element indicates the transmitted Qos
index in the adjacent RNC related to PLMN.
This managed element indicates the MBMS service

area information.
This managed element indicates the serving cell

information of the preferential frequency layer at the
MBMS service area.
information of the non-preferential frequency layer at
the MBMS service area.
This managed element indicates the relationship

between LAC and SNAC when CN is not shared
across the network.
This managed element indicates the global information
of HSPA.
This managed element indicates the global information

of common EDCH.

information of dynamic radio bearer control related to
PLMN.
information of dynamic radio bearer control related to
PLMN.
This managed element indicates the global
configuration information of MBMS.
This managed element indicates the mapping

relationship among basic priorities when the application
DPI is obtained after the priority of application services
is mapped to its basic priorities.
between two managed objects (PLMN+ extended
code, and PLMN+SNAC) authorized to users.
This managed element indicates the switch parameter
of MR functions.

configuration information of access control.
This managed element indicates the UE timers and

constants information.

information related to application service types.

configuration of Qchat services.
This managed element indicates the user configuration

in the white list.

profile discontinuously sent by and received by the UE
in HSPA+.
This managed element indicates the table of
configuration information discontinuously sent by and
received by the UE in HSPA+.
This managed element indicates the container of
information tables related to a service sub-category.
This managed element indicates the functional node

information of a service subtype.
This managed element indicates the container of

information tables related to the power control of a
service subtype.
This managed element indicates the power control
information related to a service subtype.

information related to service subtypes and diversities.

information related to dedicated service subtypes of
users that are added to the white list.
This managed element indicates the profile of traffic
measurement.
This managed element indicates the event

measurement of UP traffic on RACH.
This managed element indicates the periodical

measurement of UE traffic on RACH.

measurement of UP traffic on RACH.

measurement of UE traffic on DCH.

measurement of UP traffic on DCH.
This managed element indicates the periodical

measurement of UE traffic on DCH.

measurement of UP traffic on HS-DSCH.

measurement of UP background-and-interactive
services on HS-DSCH.
measurement of UP traffic in the CELL_FACH state on
HS-DSCH.
measurement of UP traffic switched by ETTI on EDCH.
measurement of UP traffic on E-DCH.

measurement of UP traffic in the CELL_FACH state on
E-DCH.
This managed element indicates the E-DCH
throughput measurement configuration for HSDSCH/E-DCH to HS-DSCH/DCH switching.
This managed element indicates the intra-frequency
measurement profile.

measurement related to service types.

measurement of the Ec/No of events that are related to
service types.
measurement of the RSCP of events that are related
to service types.
measurement unrelated to service types.

measurement of the Ec/No of periods that are related
to service types.

measurement of the RSCP of periods that are
unrelated to service types.
measurement of the Ec/No of detection-set events that
are unrelated to service types.
measurement of the RSCP of detection-set events that
are unrelated to service types.

This managed element indicates the inter-frequency

measurement (UTRAN) of the Ec/No of events that are
related to service types.
measurement (UTRAN) of the RSCP of events that are
measurement (GSM) of the Ec/No of events that are
measurement (GSM) of the RSCP of events that are
measurement (EUTRAN) of the Ec/No of events that
are related to service types.
measurement (EUTRAN) of the RSCP of events that

measurement of the Ec/No of periods that are
This managed element indicates the inter-system



measurement (GSM) of the Ec/No of events that are
measurement (GSM) of the RSCP of events that are
measurement (EUTRAN) of the Ec/No of events that
measurement (EUTRAN) of the RSCP of events that

measurement of the Ec/No of periods that are
This managed element indicates the internal
measurement relationship among a set of UEs,
including the Tcp/RTT event measurement and RTT
period measurement.
This managed element indicates measurements used
for AMR adjustment. Those measurements are the
internal measurement relationship of UE transmitted
power.
by PS services. Those measurements are the internal
measurement relationship of UE transmitted power.
for triggering handover. Those measurements are the
internal measurement relationship of UE transmitted
power.
for location. Those measurements are the periodical
internal measurement relationship of UE Rx-Tx time
difference.
This managed element indicates the internal

measurement relationship of UTRAN judgement events
of UE Rx-Tx time difference.
for radio-link timing adjustment. Those measurements
are the internal measurement relationship of UE Rx-Tx
time difference.
This managed element indicates UE transmitted power
event report for power limitation judgement.
This managed element indicates the common

measurement relationship among a set of Node Bs,
including the measurement of periodical
RTWP/TCP/TUtranGps/HRP/NHTCP/RSEPS, and the
measurement
changed
TUtranGps.
This managed of
element
indicates
the measurement of
periodical
RTWP/TCP/TUtranGps/HRP/NHTCP/RSEPS, and the
measurement of changed TUtranGps.
This managed element indicates the dedicated
measurement profile of a set of Node Bs.
This managed element indicates the dedicated

measurement relationship of Node Bs.

information profile of HSDPA GBR resource
consumption limiting.
information of HSDPA GBR resource consumption
limiting.
This managed element indicates the CFN offset
configuration.
This managed element indicates the LA information of

an RNC. The maximum number of LAs is 100.
This managed element indicates the RA information of

an RNC. The maximum number of SAs is 2560.
This managed element indicates the SA information of

an RNC.
This managed element indicates the SA information in

the BC domain of an RNC.
This managed element indicates the cell information of

a URA.

information of Node Bs of an RNC.

information of Node Bs of an RNC.

information and configuration parameters defined in the
3GPP UTRAN resource information model.
This managed element indicates the supplementary
information of a cell.
This managed element indicates the relationship of the

internal and external cells of UTRAN.
This managed element indicates the relationship of

UTRAN cells and external GSM cells.
This managed element indicates the adjacent

relationship of UTRAN cells and EUTRAN cells. It is
This managed element indicates the black list of Eutran
Neighbouring Cell.
This managed element indicates the AICH

configuration.
This managed element indicates the PRACH

configuration
This managed element indicates the SCCPCH

configuration.
This managed element indicates the PICH

configuration.
This managed element indicates the MBMS

configuration.
This managed element indicates the SCPICH

configuration.

between cell selection and reselection.
This managed element indicates the cell reselection

frequency and priority information.
This managed element indicates the HSPA

configuration in a cell.
This managed element indicates the MBMS

configuration in a cell.
This managed element indicates the EFACH

configuration.
This managed element indicates the power load

balance information.
This managed element indicates the load control

relationship.
This managed element indicates the parameter of the

MR functional switch that is related to cells.
This managed element indicates the adjacent RNC of

this RNC.
This managed element indicates the information about

adjacent cells that are not belong to this RNC. It is
This managed element indicates the cell configuration
information of GSM. It is configured with protocol
parameters.
This managed element indicates the NodeB
configuration information of EUTRAN.

information of EUTRAN.

information of EUTRAN.
This managed element indicates the configuration for

the route information of CS/PS POOL.

the route information from IDNNS to CS/PS POOL.

the route information from IMSI to CS/PS POOL.
This managed element indicates the black list of IMEI.
This managed element indicates the IMEI TAC list for

SPID.
This managed element indicates the RAN priority when

UE in dedicated state.
This managed element indicates the HS-PDSCH

measurement power offset profile.
This managed element indicates the HS-PDSCH

measurement power offset configuration.
Managed
Object
Logical Name
3GPP Name
3GPP Reference
GUI Name
URncFunction
URncFunction
N/A
N/A
RNC Configuration Object ID
URncFunction
description
N/A
N/A
Description
URncFunction
userLabel
N/A
N/A
User Label
URncFunction
rncid
N/A
N/A
RNC Identity
URncFunction
sharedNetMode
N/A
N/A
Shared Network Mode
URncFunction
plmnSelectMethod
N/A
N/A
Plmn Select Method for

MOCN Network Sharing
URncFunction
initRrcOnDch
N/A
N/A
Type of Transport Channel

for Initial RRC Connection
Setup
URncFunction
gpsInfoRoot
N/A
N/A
GPS Information Root
URncFunction
cellLdInfoVldTim
N/A
TS 25.413
Duration of Valid Cell Load

Info
URncFunction
nonCMaxPduSize
Maximum MACTS 25.423;

d PDU Size
TS 25.433
Extended
Downlink NonConversational Service

Maximum MAC-d PDU Size
Extended
URncFunction
cMaxPduSize
Maximum MACTS 25.423;

d PDU Size
TS 25.433
Extended
Downlink Conversational
Service Maximum MAC-d
PDU Size Extended
URncFunction
cMaxUlPduSize
Largest UL RLC
TS 25.331
PDU size
Uplink Conversational
Service Maximum Uplink
RLC PDU Size
URncFunction
cMinUlPduSize
Minimum UL
RLC PDU size
Uplink Conversational
Service Minimum Uplink
RLC PDU Size
URncFunction
nonCMaxUlPduSize
Largest UL RLC
TS 25.331
PDU size
Uplink Non-Conversational
Service Maximum Uplink
RLC PDU Size
URncFunction
nonCMinUlPduSize
Minimum UL
RLC PDU size
TS 25.331
Service Minimum Uplink
RLC PDU Size
URncFunction
harqRvConfig
HARQ RV
Configuration;
HARQ Info for
E-DCH
TS 25.331;
TS 25.433;
TS 25.423
HARQ RV Configuration
URncFunction
maxRateWithNVHs N/A
N/A
Maximum Bit Rate with HSSCCH Less for NonVoIP/AMR
URncFunction
emgCallRdtSwitch
N/A
N/A
Emergency Call Redirect

Switch
URncFunction
interRatV1V2AmrC
N/A
ut
N/A
Inter-RAT V1+V2 Amr Cut

Decision
URncFunction
intraRatV1V2AmrC
N/A
ut
N/A
Intra-RAT V1+V2 Amr Cut

Decision
URncFunction
csRrcOnFachSwch N/A
N/A
Switch of Non Emergency

CS Service Access to
CELL_FACH On RRC
TS 25.331
URncFunction
t4StpIfMeaActRat
N/A
N/A
Timer for Stopping Interfrequency Measurement and

Activating Inter-RAT
Measurement
URncFunction
dcRedirectStaSw
N/A
N/A
Dual Carrier Redirection

Strategy Switch
URncFunction
bwOvldRelUeNum
N/A
N/A
the Release UE Number

when Band Exceeds Limit
URncFunction
rrcSetupRetraNum
N/A
N/A
Maximum Number of
Retransmissions of the RRC
CONNECTION SETUP
URncFunction
tRrcSetupRetran
N/A
N/A
Interval of Retransmission of
RRC CONNECTION SETUP
TS 25.331
Maximum Number of
CONNECTION RELEASE
COMPLETE Message
(N308)
URncFunction
n308
N308
URncFunction
nReTran
N/A
N/A
Maximum Number of
CONNECTION RELEASE
Message
URncFunction
maxCsDelay
Max CS Delay
TS 25.331
Max CS Delay
URncFunction
dToHsDelayThr
N/A
N/A
Delay Time Threshold of

D/D->HS/D or HS/E after
HS/D or HS/E ->D/D
N/A
Wait Timer for Adjusting

Uplink and Downlink
Reconfiguration by One Step
Upward
N/A
Wait Timer for Adjusting

Uplink and Downlink
Reconfiguration by One Step
Downward
N/A
Wait Time for RADIO

BEARER
RECONFIGURATION
COMPLETE when
CELL_DCH to CELL_FACH
URncFunction
URncFunction
URncFunction
upUdRecfgTimer
dnUdRecfgTimer
N/A
N/A
tRbRecfgCmpDtoF N/A
URncFunction
iuUlInSeqDlvInd
N/A
N/A
IU Uplink in Sequence
Delivery Indicator whether
According to Indication from
CN
URncFunction
rncLcsOverIurSw
N/A
N/A
Lcs over Iur Support

Indicator
URncFunction
multicastSupInd
N/A
TS 25.331;
TS 25.413
MBMS Multicast Mode

Support Indicator
URncFunction
eBroadcastSupInd
N/A
TS 25.331;
TS 25.413
MBMS Enhanced Broadcast

Mode Support Indicator
URncFunction
mbmsIurSupInd
N/A
TS 25.331;
TS 25.413
MBMS over Iur Support

Indicator
URncFunction
mbms8kRateSwitch N/A
N/A
MBMS Channel Rate

Support Indicator (8kbps)
URncFunction
mbms16kRateSwitc
N/A
h
N/A
MBMS Channel Rate

URncFunction
mbms32kRateSwitc
N/A
h
N/A
MBMS Channel Rate

URncFunction
mbms64kRateSwitc
N/A
h
N/A
MBMS Channel Rate

URncFunction
mbms128kRateSwit
N/A
ch
N/A
MBMS Channel Rate

URncFunction
mbms256kRateSwit
N/A
ch
N/A
MBMS Channel Rate

URncFunction
intraHoEcNoThrd
N/A
N/A
Cpich Ec/N0 Minimum

Threshold for IntraFrequency Handover
URncFunction
intraHoRscpThrd
N/A
N/A
Cpich Rscp Minimum

Threshold for IntraFrequency Handover
URncFunction
tcnquery
N/A
N/A
Timer for State Query
URncFunction
cbsSwitch
N/A
N/A
CBS Function Switch
URncFunction
pchToAWS
ToAWS
TS 25.433
Time of Arrival Window

Startpoint for PCH
URncFunction
pchToAWE
ToAWE
TS 25.433

Endpoint for PCH
URncFunction
fachToAWS
ToAWS
TS 25.433

Startpoint for FACH
URncFunction
fachToAWE
ToAWE
TS 25.433

Endpoint for FACH
URncFunction
t321
T321
TS 25.331
Inactivity Time of E_FACH

Transmission (T321)
URncFunction
drxCycleLength
HS-DSCH DRX
TS 25.331
cycleFACH
Cycle Length of Discontinue

Receiving of E-FACH
URncFunction
rxBurstlength
HS-DSCH Rx
burstFACH
TS 25.331
Length of Receiving Frames

in E-FACH DRX
URncFunction
ueDrxInd
N/A
N/A
Indication of UE with
Enhanced DRX
URncFunction
tiureldelay
N/A
N/A
Timer for IU Release

Resource
URncFunction
kUtran
UTRAN DRX
cycle length
coefficient
TS 25.331
UTRAN DRX Cycle Length

Coefficient
URncFunction
rabMeaBalStaSwch N/A
N/A
Inter-Frequency Balance
Switch Based on
Measurement
URncFunction
URncFunction
coverMeaBalSwch
measBalTimer
N/A
N/A
N/A
Inter-Frequency Balance
Switch Based on
Measurement with
Overlapping or Covering
Relation
N/A
Timer of Deactivate
Compressed Mode for
Balance Strategy Based On
Measurement
URncFunction
tResndMeaCtrlRel
N/A
N/A
The Time Threshold that the

RNC May Resend the
MEASUREMENT CONTROL
RELEASE
URncFunction
heartBeatUeVerR4 N/A
N/A
The Target of UE Version for

Heart Beat (R4)
URncFunction
N/A

Heart Beat (R5)
URncFunction
N/A

Heart Beat (R6)
URncFunction
N/A

Heart Beat (R7)
URncFunction
N/A

Heart Beat (R8)
URncFunction
heartBeatFreq
N/A
Heart Beat Period
N/A
The Switch Indicates

whether Only Judge the
Downlink Traffic on Heart
Beat for Channel Switching
to PCH/IDLE
URncFunction
onlyDnOnHB
N/A
N/A
URncFunction
berTargAdpTimer
N/A
N/A
BER Target Adjust Timer in

Fast OLPC SIR Target
Downward Adjustment
Based on BER
URncFunction
tWaitRlRestore
N/A
N/A
Time of Waiting for RADIO

LINK RESTORE
INDICATION
URncFunction
tWaitCelUpUuExp
N/A
N/A
URncFunction
tWaitActSetUpCmp N/A
N/A
Time of Waiting for CELL

UPDATE After RNC Sending
Radio Link Deactivation
Command for RB
Setup/Reconfiguration/Relea
se Response Timer
Expiration
Waiting time length for
ACTIVE SET UPDATE
COMPLETE
URncFunction
waitRbCompTimer
N/A
N/A
Time of Waiting for RB

se Response over Uu
Interface
URncFunction
tRrcConSetupExp
N/A
N/A
Time of Waiting for RRC

CONNECTION COMPLETE
URncFunction
celChgFastCfgInd
N/A
N/A
Switch of Fast
Reconfiguration Function
When the HS Service Cell
was Changed
URncFunction
tWaitContextReq
N/A
N/A
Waiting Time for SRNS

Context Request
URncFunction
tWaitDataFwd
N/A
N/A
Waiting Timer for SRNS

DATA FORWARD
COMMAND
URncFunction
tWaitRelCmd
N/A
N/A
Waiting Timer of SRNS for

IU RELEASE COMMAND
while PS service handover
from 3G to 2G
URncFunction
csNriBitNum
N/A
N/A
Network Resource Identifier

Bit Num in CS Domain
URncFunction
psNriBitNum
N/A
N/A
Network Resource Identifier

Bit Num in PS Domain
URncFunction
amrGbrResInd
N/A
N/A
GBR of AMR Service

Whether to be Reserved
Indicator
URncFunction
locModeSwch
N/A
N/A
Location Mode
URncFunction
qChatSupportInd
N/A
N/A
QChat Support Indicator
URncFunction
fastRetEUtranSwch N/A
N/A
RNC Switch of Fast Return

to E-UTRAN
URncFunction
rubRsvdSwch
N/A
N/A
Reserved RUB Switch
URncFunction
rubRsvdNeedUEVe
N/A
r
N/A
UE Version for Reserved

RUB
URncFunction
shaNetTarCelStra
N/A
N/A
Target Cell Judgment

Strategy for
Access/Handover Algorithm
in Shared Network
URncFunction
hcsSupportInd
N/A
N/A
HCS Support Indicator
URncFunction
deviceTypeInd
N/A
N/A
UE's Device Type Condition

Whether to be Judged
Indicator when Heart Beat
Detection
URncFunction
cdtOvdThd
N/A
N/A
CDT Overload Threshold
URncFunction
tReCfgLevCmnStat N/A
N/A
Wait Time for

RECONFIGURATION
COMPLETE when UE
Leaving PCH or FACH State
to Enter CELL _DCH State
URncFunction
rrcOnHsDc
N/A
RRC on HS Channel with

DC Indicator
N/A
URncFunction
iurPwrCtlReqSwch
N/A
N/A
Switch of Using DL Power

Control Request Information
in Iur Interface
URncFunction
iurEcNoDelta
N/A
N/A
The Offset of CPICH Ec/No

in Iur Interface Relative to
the UE Measurement Result
URncFunction
r99R4PchSwch
N/A
N/A
Switch of
URA_PCH/CELL_PCH for
UE of Release 99 and
Release 4
URncFunction
utraSISwitch
N/A
N/A
UTRA SI Switch
URncFunction
appSrvDetcPrid
N/A
N/A
Application Service
Detection Period
URncFunction
totalDataNum
N/A
N/A
Total Data Number
URncFunction
dpiPendingTime
N/A
N/A
DPI Peading Time
URncFunction
defPlmnInGwcnInd N/A
N/A
User-defined PLMN
Selection In Case of GWCN
support Indicator
URncFunction
mulPlmnInMIBInd
N/A
Multiple PLMNs is allowed In

MIB or not
N/A
URncFunction
parallelRrcSetup
N/A
N/A
Switch of RNC Send RL

SETUP and RRC
CONNECTION SETUP in
Parallel when Setting up
RRC CONNECTION
URncFunction
routeTypeUEBased N/A
N/A
The Routing Select Type for

UE-Based
URncFunction
csThdForEngCon
N/A
N/A
CS Service Threshold for

energy conservation
URncFunction
ueThdForEngCon
N/A
N/A
UE Threshold for energy

conservation
URncFunction
csThdForAttSwch
N/A
N/A
CS Service Threshold for

Board Attribution switch
URncFunction
ueThdForAttSwch
N/A
N/A
UE Threshold for Board

Attribution switch
URncFunction
brdPwrOffWaitTim
N/A
N/A
Time to wait Service auto

hang off before Board power
off
URncFunction
fastL1SyncSwch
N/A
N/A
Switch of Faster L1 DCH

synchronization
URncFunction
norCmpUserAcThd N/A
N/A
CMP User Admission Control

Threshold When the Module
in Normal Running
URncFunction
norDmpUserAcThd N/A
N/A
URncFunction
tWaitCelUpRlDact
N/A
N/A
URncFunction
vLacPaingInd
N/A
N/A
DMP User Admission Control

Threshold When the Module
in
Normal
Running
Time
of Waiting
for CELL
UPDATE After RNC Waiting
ACTIVE SET UPDATE
COMPLETE/
RECONFIGUATION
COMPLETE of Hard
Handover Timer Expiration
UPDATE COMPLETE Timer
Expiration
Virtual LAC Paging Support
Indication
URncFunction
poWhiteListUser
N/A
N/A
Power Offset for White List

User
URncFunction
dropForVipSwitch
N/A
N/A
User Drop Switch Triggered

by VIP
URncFunction
vipEstNtfSwitch
N/A
N/A
VIP Exist Notification Switch
URncFunction
vipEstNtfNbrPrio
N/A
N/A
Lowest Priority of Neighbor

Cell Notified of VIP Existing
URncFunction
whtLstSwitch
N/A
N/A
Switch for White List
URncFunction
sirUpAddStep
N/A
N/A
Additional Size for Uplink

SIR Target Increasing When
Consecutive Error TB
Occurs
URncFunction
validTimTbCovPrd
N/A
N/A
Valid Time Window for the

TB in Shield Period
URncFunction
boardPwrOffHoTmr N/A
N/A
The Waiting Timer for UE

Handover When Board's
Power is Off
URncFunction
maxCallCapability
N/A
N/A
Maximum Call Capacity
URncFunction
maxThroughput
N/A
N/A
Maximum Data Process

Capacity
URncFunction
mscpoolBalanceNu
N/A
m
N/A
Load Balance Parameter in

MSC Pool
URncFunction
sgsnpoolBalanceNu
N/A
m
N/A
Load Balance Parameter in

SGSN Pool
URncFunction
vipSpecFreqSwch
N/A
N/A
VIP Specific Frequency

Strategy Switch
URncFunction
vipDlArfcnforCsInd
N/A
N/A
CS VIP Specific Downlink

Carrier Central Frequency
Indicator
URncFunction
vipForcedHOSwch
N/A
N/A
VIP Forced Handover Switch
URncFunction
balFailOpSwch
N/A
N/A
Switch of Optimization When

Load Balance Fail.
URncFunction
vipDlArfcnforPsInd
N/A
N/A
PS VIP Specific Downlink

Carrier Central Frequency
Indicator
N/A
Switch of RNC Send RL

SETUP and ACTIVE SET
UPDATE Parallelly when
Soft Add Handover
URncFunction
parallelSoftHO
N/A
URncFunction
dscrInCmnToDedS
N/A
wch
N/A
Switch of DSCR in
transferring unsuccessfully
from Common Status to
CELL_DCH status
URncFunction
imeiBlackSwch
N/A
N/A
Imei blacklist Switch
URncFunction
sonTransRespSwitc
N/A
h
N/A
Son Transfer Response

Switch
URncFunction
sonTransReqPeriod N/A
N/A
The period of RNC starting

the SON Transfer.
URncFunction
sonTransReqNumT
N/A
hrd
N/A
Son Transfer Request

Number Threshold in one
second
URncFunction
sonTransRespNum
N/A
Thrd
N/A
Response the Son Transfer

message Number Threshold
in one second
URncFunction
ldBsdEutranHOInd
N/A
N/A
Inter System Handover with

Consideration of Eutran
Load Support Indicator
URncFunction
numPeriodCreatCel
N/A
l
N/A
This parameter indicates the

number of setup cells in one
period.
URncFunction
startDsarCelNum
N/A
Number of Cells Updating

SIB3 When Starting the
DSAR according to the Iu
N/A
Time Interval Updating SIB3

among Cells When Starting
the DSAR according to the
Iu
URncFunction
startDsarCelInt
N/A
N/A
Number of Cells Updating

SIB3 When Stopping the
DSAR According to the Iu
and When Changing the
DSAR Switch
Time Interval Updating SIB3
among Cells When Stopping
the DSAR According to the
Iu and When Changing the
DSAR Switch
URncFunction
stopDsarCelNum
N/A
N/A
URncFunction
stopDsarCelInt
N/A
N/A
URncFunction
Multicell E-DCH
mulEdchTrBearMod Transport
TS 25.331
Bearer Mode
Multicell E-DCH Transport

Bearer Mode
URncFunction
vipDlResBwd
N/A
N/A
Downlink Reserved
Bandwidth for VIP UE's I/B
Traffic
URncFunction
fltIncmpNbrCelSwit N/A
N/A
Switch of Filtering the

incomplete Neighboring
Cells in SIB
URncFunction
highPriAcSwch
N/A
Admission Control Switch for

High Priority Traffic when
Resource Congestion
N/A
URncFunction
interHoMth
N/A
N/A
Inter-frequency Handover
Method
URncFunction
intRatHoMth
N/A
N/A
Inter-RAT Handover Method
URncFunction
relocFastCfgInd
N/A
N/A
Switch of Fast
Reconfiguration Function for
Relocating into DRNC
URncFunction
emiMeasInCDTSwc
N/A
h
N/A
The Switch for the EMI

Function in CDT-CR
URncFunction
vipStateChgSwch
N/A
N/A
VIP User State Transfer

Switch
URncFunction
ratCelInfoSwch
N/A
N/A
Inter-rat Cell Information

indication Strategy
URncFunction
paging1RspTimer
N/A
N/A
Paging Type1 Response

Timer
URncFunction
maxCfgSatNum
N/A
N/A
Maximum Satelite Number in

Position measurement
Control Message
URncFunction
fachCacToMinRate N/A
N/A
FACH CAC Tolerable

Minimum Bit Rate
URncFunction
psL2USwchByCs
N/A
N/A
Switch of Permit PS
Handover from LTE to
UTRAN Because of CSFB
URncFunction
uciuErrorOpSwch
N/A
N/A

UCIU ERROR
URncFunction
rlFailureOpSwch
N/A
N/A

RL FAILURE
URncFunction
discCNUpdReject
N/A
N/A
Switch of whether to discard

redirection LU-Reject/AttachRej when the link of
subsequent Iu is break
URncFunction
dsarSwch
N/A
N/A
Switch of DSAR
URncFunction
closeFreFunSwit
N/A
N/A
Switch off Frequency

Intelligently Function
URncFunction
rncUlBlerHoSwch
N/A
N/A
RNC Switch for Handover

Based on UL BLER
URncFunction
rncTxPwrHoSwch
N/A
N/A
RNC Switch for Handover

Based on UE Tx Power
URncFunction
sscopSmoothTime
N/A
N/A
Smooth admission time

when sscop congestion
disappeared
URncFunction
imeiPcFunSwitch
N/A
N/A
IMEI Based Power Control

Function Switch
URncFunction
enhanceHoSwch
N/A
N/A
Enhanced Handover Switch
URncFunction
gResPara1
N/A
N/A
Global Reserved Parameter

1
URncFunction
gResPara2
N/A
N/A

2
URncFunction
gResPara3
N/A
N/A

3
URncFunction
gResPara4
N/A
N/A

4
URncFunction
gResPara5
N/A
N/A

5
URncFunction
gResPara6
N/A
N/A

6
URncFunction
gResPara7
N/A
N/A

7
URncFunction
gResPara8
N/A
N/A

8
URncFunction
gResPara9
N/A
N/A

9
URncFunction
gResPara10
N/A
N/A

10
URncFunction
gResPara11
N/A
N/A

11
URncFunction
gResPara12
N/A
N/A

12
URncFunction
gResPara13
N/A
N/A

13
URncFunction
gResPara14
N/A
N/A

14
URncFunction
gResPara15
N/A
N/A

15
URncFunction
gResPara16
N/A
N/A

16
URncFunction
gResPara17
N/A
N/A

17
URncFunction
gResPara18
N/A
N/A

18
URncFunction
gResPara19
N/A
N/A

19
URncFunction
gResPara20
N/A
N/A

20
URncFunction
gResPara41
N/A
N/A

41
URncFunction
gResPara42
N/A
N/A

42
URncFunction
gResPara43
N/A
N/A

43
URncFunction
gResPara44
N/A
N/A

44
URncFunction
gResPara45
N/A
N/A

45
URncFunction
gResPara46
N/A
N/A

46
URncFunction
gResPara47
N/A
N/A

47
URncFunction
gResPara48
N/A
N/A

48
URncFunction
gResPara49
N/A
N/A

49
URncFunction
gResPara50
N/A
N/A

50
URncFunction
gResPara51
N/A
N/A

51
URncFunction
gResPara52
N/A
N/A

52
URncFunction
gResPara53
N/A
N/A

53
URncFunction
gResPara54
N/A
N/A

54
URncFunction
gResPara55
N/A
N/A

55
URncFunction
gResPara56
N/A
N/A

56
URncFunction
gResPara57
N/A
N/A

57
URncFunction
gResPara58
N/A
N/A

58
URncFunction
gResPara59
N/A
N/A

59
URncFunction
gResPara60
N/A
N/A

60
URncInfo
URncInfo
URncInfo
N/A
cqiFeedbaLoadSwi N/A
N/A
Extended Info of RNC Object

ID
N/A
The Switch of CQI Feedback

Cycle and CQI Repetition
Factor Adjustment Based on
Load
URncInfo
vipRrcSrb272Swch N/A
N/A
Switch of the DCH 27.2Kbps

Rate whether to be Used for
VIP User's Initial RRC
Connection Setup
URncInfo
badCovRrcSwch
N/A
N/A
Switch of the RRC

Connection Access Strategy
For Bad Coverage
URncInfo
amrBadCovSwh
N/A
N/A
AMR Initial Date Rate

Decreasing in Bad Coverage
Switch
URncInfo
initUEFiDAcSai
N/A
N/A
Filling SAI Corresponding

with CELL Consuming Radio
Resources Indicator
URncInfo
eToD4BtimesThr
N/A
N/A
E-DCH Throughput
Measurement Event 4B
Counter Threshold for the
HS-DSCH/E-DCH to HSDSCH/DCH Switching
URncInfo
blerArpSwitch
N/A
N/A
The Switch for ARP based

BLER Function
URncInfo
defaultArpSeg
N/A
N/A
Default ARP Segment
URncInfo
arpGoldPc
N/A
N/A
ARP Threshold of Golden

Subscriber Used in Power
Control
URncInfo
arpBronzePc
N/A
N/A
ARP Threshold of Bronze

Subscriber Used in Power
Control
URncInfo
loadFilterCoeff
N/A
N/A
Load Filter Coefficient
URncInfo
userNumFilterCoeff N/A
N/A
User Number Filter

Coefficient
URncInfo
sirRapidConvSwi
N/A
N/A
URncInfo
olpcBerSwitch
N/A
N/A
Uplink BER OLPC Algorithm

Switch
URncInfo
shieldPeriodSwch
N/A
N/A
Shield Period Switch
URncInfo
berFilterCoeff
N/A
N/A
BER Filter Coefficient
URncInfo
olPcAlg
N/A
N/A
Normal OLPC Algorithm

Method
URncInfo
outSirTimWinSize
N/A
N/A
Time Window Size of

Opening Shield Period
URncInfo
outSirThresh
N/A
N/A
Threshold of Opening Shield

Period
SIR Target Rapid

Convergence Switch
URncInfo
shieldPeriod
N/A
N/A
Shield Period
URncInfo
rxlevNecellInd
N/A
N/A
Switch of RXLEV-NECELL
indication in
oldBSS_ToNewBSS
URncInfo
modNasPlmnSwch N/A
N/A
Modify PLMN of NAS

Message Switch
URncInfo
fillCnInfoSwch
N/A
N/A
Fill Cn Information IE in Uu
Message or Not
URncInfo
eutranPsHoMode
N/A
N/A
PS Handover to Eutran
Mode
URncInfo
psHoLteMeasTimer N/A
N/A
Timer of Deactivate
Compressed Mode for Fast
Return to Eutran
URncInfo
vipFastL1SyncSwch N/A
N/A
Switch of Faster L1 DCH

synchronization function for
VIP
URncInfo
pchCsPageRsdSwc
N/A
h
N/A
Switch of CS Paging Resend

in PCH Status
URncInfo
pchCsPageRsdTim
N/A
er
N/A
Timer of CS Paging Resend

in PCH Status
ULocationArea
ULocationArea
N/A
N/A

Object ID
ULocationArea
lac
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
URoutingArea
URoutingArea
N/A
N/A
Routing Area Configuration

Object ID
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
URoutingArea
rac
RAC; Routing
Area Code
UServiceArea
UServiceArea
N/A
N/A
Service Area Configuration in

CS+PS Domain Object ID
UServiceArea
sac
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Service Area Code for CS

and PS Domain
UServiceAreaB
UServiceAreaBc
c
N/A
N/A
Service Area Configuration in

BC Domain Object ID
UServiceAreaB
sacbc
c
SAC; Service
Area Code
TS 25.419;
TS 23.003
Service Area Code for BC

Domain
ULogicalRnc
ULogicalRnc
N/A
N/A
Logic RNC Configuration

Object ID
ULogicalRnc
gsmBARangeNum
maxNumGSMFr
TS 25.331
eqRanges
Number of GSM BA Range
ULogicalRnc
gsmLRange
GSM Lower
Range
(UARFCN)
TS 25.331
GSM Lower Range
ULogicalRnc
gsmURange
GSM Upper
Range
(UARFCN)
TS 25.331
GSM Upper Range
ULogicalRnc
fddFreqRngNum
maxNumFDDFr
TS 25.331
eqs
Number of FDD UMTS

Frequency Range
ULogicalRnc
lUarfcn
UARFCN
(Nlow)
TS 25.331
UARFCN (Nlow)
ULogicalRnc
uUarfcn
UARFCN
(Nupper)
TS 25.331
UARFCN (Nupper)
ULogicalRnc
amrRncAdjust
N/A
N/A
AMR Rate Adjustment

Switch for RNC
ULogicalRnc
qosNegRenegSw
N/A
N/A
Switch for QoS

Negotiation/Renegotiation
ULogicalRnc
mrSw
N/A
N/A
MR Function Switch
TS 25.331;
TS 25.413
Integrity Protection Algorithm

(UIA1)
TS 25.331;
TS 25.413
Integrity Protection Algorithm

(UIA2)
Integrity
protection
algorithm;
Integrity
Protection
Algorithm
Integrity
protection
algorithm;
Integrity
Protection
Algorithm
ULogicalRnc
integrityAlgUIA1
ULogicalRnc
integrityAlgUIA2
ULogicalRnc
encryAlgUEA0
Encryption
Algorithm
TS 25.413
Encryption Algorithm (UEA0)
ULogicalRnc
encryAlgUEA1
Encryption
Algorithm
TS 25.413
ULogicalRnc
encryAlgUEA2
Encryption
Algorithm
TS 25.413
ULogicalRnc
amrNbMode0UseTa
N/A
g
N/A
AMR_NB 4.75k Use Tag
ULogicalRnc
amrNbMode1UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode2UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode3UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode4UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode5UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode6UseTa
N/A
g
N/A
ULogicalRnc
amrNbMode7UseTa
N/A
g
N/A
ULogicalRnc
amrWbMode0UseT
N/A
ag
N/A
AMR_WB 6.60k Use Tag
ULogicalRnc
amrWbMode1UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode2UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode3UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode4UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode5UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode6UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode7UseT
N/A
ag
N/A
ULogicalRnc
amrWbMode8UseT
N/A
ag
N/A
ULogicalRnc
tNnsf
TS 25.413
Tnnsf
N/A
Lower Limit of GBR for

Uplink Services Used for
QoS
ULogicalRnc
ulLowLimNegGBR
TNNSF
N/A
ULogicalRnc
dlLowLimNegGBR
N/A
N/A
Lower Limit of GBR for

Downlink Services Used for
QoS
ULogicalRnc
negGBRLevNum
N/A
N/A
Negotiated GBR Level

Number Shared by Uplink
and Downlink
ULogicalRnc
cdtSw
N/A
N/A
CDT Function Switch
ULogicalRnc
cdtImeiAcqSw
N/A
N/A
CDT-IMEI Acquisition Switch
ULogicalRnc
rlRefTimeAjtSw
N/A
N/A
Switch for RL Reference

Time Adjust During Diversity
Mode
ULogicalRnc
hoToGsmPenTimer N/A
N/A
Handover to GSM Penalty

Timer
ULogicalRnc
compMdCfgStra
N/A
N/A
Compressed Mode
Configuration Strategy
ULogicalRnc
rncPsHoLteSw
N/A
N/A
RNC Switch for PS

Handover with LTE
ULogicalRnc
rncSrvccSw
N/A
N/A
RNC SRVCC Switch
ULogicalRnc
nAmrInitialRate
N/A
N/A
Narrow-Band AMR Initial

Data Rate for High Cell Load
ULogicalRnc
wAmrInitialRate
N/A
N/A
Wide-Band AMR Initial Data

Rate for High Cell Load
ULogicalRnc
csNullNri
N/A
N/A
Special Network Resource

Identifier in CS Domain
ULogicalRnc
psNullNri
N/A
N/A
Special Network Resource

Identifier in PS Domain
ULogicalRnc
thpThresh
N/A
N/A
THP Segment Threshold
ULogicalRnc
ulRateAdjLevNum
N/A
N/A
Uplink Rate Adjustment

Level Number
ULogicalRnc
ulRateAdjLev
N/A
N/A
Uplink Rate Adjustment

Level
ULogicalRnc
dlRateAdjLevNum
N/A
N/A
Downlink Rate Adjustment

Level Number
ULogicalRnc
dlRateAdjLev
N/A
N/A
Downlink Rate Adjustment

Level
ULogicalRnc
refUDrbcProfile
N/A
N/A
Used Dynamic Radio Bearer

Control Information Profile
ULogicalRnc
amrOverHspaSwch N/A
N/A
Switch of CS voice over

HSPA
ULogicalRnc
drbcSwch
N/A
DRBC Method Switch
N/A
ULogicalRnc
ettiTraffVolSwch
N/A
N/A
Switch of E-TTI Switching

Triggered by User Plane
Throughput Measurement
ULogicalRnc
dlPwrDasf
N/A
N/A
Switch for DL DCH Rate

Adjustment Based on D-TCP
ULogicalRnc
ulPwrDasf
N/A
N/A
Switch for UL DCH Rate

Adjustment Based on UE
Transmission Power
ULogicalRnc
rfach
N/A
N/A
Downlink Maximum Rate

Threshold of I/B Service on
CELL_FACH
ULogicalRnc
rrach
N/A
N/A
Uplink Maximum Rate

Threshold of I/B Service on
RACH
ULogicalRnc
dchAdjRateSwch
N/A
N/A
Switch for DCH Rate

Adjustment Based on Traffic
Volume Measurement
N/A
HS/D->D/D or HS/E->D/D
Based on Quality
Measurement Switch for I/B
Traffic
ULogicalRnc
iBChQSwch
N/A
ULogicalRnc
sChQSwch
N/A
N/A
HS/D->D/D or HS/E->D/D
Based on Quality
Measurement Switch for S
Traffic
ULogicalRnc
cRateThrd
N/A
N/A
C Traffic Rate Threshold

Used for Determining NRT
PS Rate Upper Limit
ULogicalRnc
ulPsRateLmtLowC
N/A
N/A
NRT PS Traffic Uplink Rate

Upper Limit When Low Rate
C Traffic+ PS Traffic
ULogicalRnc
dlPsRateLmtLowC
N/A
N/A
NRT PS Traffic Downlink

Rate Upper Limit When Low
Rate C Traffic+ PS Traffic
ULogicalRnc
ulPsRateLmtHighC N/A
N/A
NRT PS Traffic Uplink Rate

Upper Limit When High Rate
C Traffic+ PS Traffic
ULogicalRnc
dlPsRateLmtHighC N/A
N/A
NRT PS Traffic Downlink

Rate Upper Limit When High
Rate C Traffic+ PS Traffic
ULogicalRnc
srbOnEdchSwch
N/A
N/A
Switch of supporting SRB on

E-DCH
ULogicalRnc
cChQSwch
N/A
N/A
Quality Measurement Switch

for VoIP/ CS Voice
ULogicalRnc
initialRateUl
N/A
N/A
Initial Rate of UL DCH
ULogicalRnc
initialRateDl
N/A
N/A
Initial Rate of DL DCH
ULogicalRnc
dchSig68Swch
N/A
N/A
Switch of 6.8kbps Signaling

Using on DCH
ULogicalRnc
csPlusPsSwch
N/A
N/A
Switch of PS Service
Channel Allocation for
Concurrent CS+PS
ULogicalRnc
r6MulRabRcfgMeth N/A
N/A
Online-already Service
Reconfiguration Method for
UE of Release 6 and after
Release 6 When Multi-RAB
ULogicalRnc
dpiDrbcSwch
N/A
N/A
Switch of Dynamic Radio

Bearer Control Based on
DPI
ULogicalRnc
dpiQoSSwitch
N/A
N/A
Switch of DPI Based QoS

Algorithm
ULogicalRnc
ULogicalRnc
nonQchatPsRelInd N/A
nQchatRel4B0Time
N/A
s
N/A
N/A
Non QChat RB2 Whether to

be Released Indicator When
It is no Traffic Volume
Event 4B0 Counter
Threshold for the Release of
Qchat UE's Non-Qchat-RB2
PS Service (Shared by
Uplink and Downlink)
ULogicalRnc
naccSuppInd
N/A
TS 25.331;
TS 25.413
NACC Support Indicator
ULogicalRnc
psInterSysHoSuppI
N/A
nd
TS 25.413
PS Inter-System Handover
Indicator
ULogicalRnc
dtmSuppInd
N/A
TS 25.413
Inter-System DTM Support

Indicator
ULogicalRnc
wAmrSupInd
N/A
TS 25.331
WB-AMR Speech Support

Indicator
ULogicalRnc
psConvTraSupInd
N/A
N/A
PS Conversational RAB for

VoIP Support Indicator
ULogicalRnc
psSigForImsInd
N/A
TS 25.413
PS Signalling RAB for IMS

Support Indicator
ULogicalRnc
srvBasedHoInd
N/A
N/A
Service-Based Handover
Support Indicator
HSDPA HSDPCCHACK/NACK
enhancement Support
Indicator
ULogicalRnc
ackNackEncInd
N/A
TS 25.331;
TS 25.413
ULogicalRnc
nbrCellMonSupInd
N/A
N/A
Neighbouring Cell Monitoring

Support Indicator
ULogicalRnc
fourEChAllowedInd N/A
TS 25.331;
TS 25.413
Four E-DPDCHs Allowed

Indicator
ULogicalRnc
cidLcsMethodInd
N/A
N/A
Cell ID Positioning Support

Indicator
ULogicalRnc
agpsLcsMethodInd N/A
N/A
AGPS Support Indicator
ULogicalRnc
basedImsiHoInd
N/A
N/A
Handover Based on IMSI

Support Indicator
ULogicalRnc
ptpOverHSInd
N/A
TS 25.331
MBMS PTP over HSDPA

Support Indicator
ULogicalRnc
ldBsdIntSysHOInd
N/A
N/A
Inter System Handover with

Consideration of Gsm Load
Support Indicator
ULogicalRnc
fastRecfgSptInd
N/A
N/A
Fast Reconfiguration
Support Indication
ULogicalRnc
amrIfHoSw
N/A
N/A
AMR Inter Frequency

Handover Switch
ULogicalRnc
amrRatHoSw
N/A
N/A
AMR Inter Rat Handover

Switch
ULogicalRnc
r99RtIfHoSw
N/A
N/A
R99 RT Inter Frequency

Handover Switch
ULogicalRnc
r99NrtIfHoSw
N/A
N/A
R99 NRT Inter Frequency

Handover Switch
ULogicalRnc
r99RtRatHoSw
N/A
N/A
R99 RT Inter Rat Handover

Switch
ULogicalRnc
r99NrtRatHoSw
N/A
N/A
R99 NRT Inter Rat Handover

Switch
ULogicalRnc
hsdpaIfHoSw
N/A
N/A
HSDPA Inter Frequency

Handover Switch
ULogicalRnc
hsdpaRatHoSw
N/A
N/A
HSDPA Inter Rat Handover

Switch
ULogicalRnc
hsupaIfHoSw
N/A
N/A
HSUPA Inter Frequency

Handover Switch
ULogicalRnc
hsupaRatHoSw
N/A
N/A
HSUPA Inter Rat Handover

Switch
ULogicalRnc
r99RtEutraHoSw
N/A
N/A
R99 RT Inter Rat (EUTRAN)

Handover Switch
ULogicalRnc
r99NrtEtraHoSw
N/A
N/A
R99 NRT Inter Rat

(EUTRAN) Handover Switch
ULogicalRnc
hsdpaEutraHoSw
N/A
N/A
HSDPA Inter Rat (EUTRAN)

Handover Switch
ULogicalRnc
hsupaEutraHoSw
N/A
N/A
HSUPA Inter Rat (EUTRAN)

Handover Switch
ULogicalRnc
dynaUpdtPO2Sw
N/A
N/A
Dynamic Update PO2 Switch
ULogicalRnc
cs64RbModeSw
N/A
N/A
CS 64K RB Mode Switch
ULogicalRnc
dePriSwch
N/A
N/A
Dedicated Priority Switch
ULogicalRnc
cdtNasCallNoAcqS
N/A
w
N/A
CDT-NAS Call Number

Acquisition Switch
ULogicalRnc
cdtNodebStaInfoAc
N/A
qSw
N/A
CDT-NodeB Statistic Info

Acquisition Switch
ULogicalRnc
cdtLastSigAcqSw
N/A
CDT-Last Signalling
Acquisition Switch
N/A
ULogicalRnc
hoToEutraPenTimer N/A
N/A
Handover to E-UTRAN
Penalty Timer
ULogicalRnc
punishUePchSwch
N/A
Switch of whether to Punish

the UE that can't Camp on
PCH state
N/A
ULogicalRnc
csPlusPsR5UeSwc
N/A
h
N/A
Switch of Whether to
transfer from HSDSCH to
DCH for R5 UE's "PS Setup
before CS" Concurrent
Service
ULogicalRnc
cdtNumThdPerRrc
N/A
CDT Record Number

Threshold Per RRC
Connection
ULogicalRnc
csPsSceHsToDSwc
N/A
h
N/A
Switch of HS-DSCH/E-DCH
or HS-DSCH/ DCH to
DCH/DCH, Used for CS+PS
Scene
N/A
ULogicalRnc
hsToDE4B0timeThr N/A
N/A
Event 4B0 Counter

Threshold for HS-DSCH to
DCH, Used for CS+PS
Scene
ULogicalRnc
csPsSceDchRate
N/A
The DCH Rate of PS

Reconfigured, Used for
CS+PS Scene
ULogicalRnc
fchPchUeCsPsSwc
N/A
h
N/A
Switch of the PS Service

Channel allocation, Used for
UE in the CELL_FACH/PCH
State Triggering CS Call
ULogicalRnc
dToHsDelaySwch
N/A
N/A
Switch of D/D->HS/D or
HS/E after HS/D or HS/E
->D/D
ULogicalIurQos ULogicalIurQos
N/A
N/A
Logical Iur Link Configuration

Object ID
ULogicalIurQos refUIurLink
N/A
N/A
Used Iur Link
ULogicalIurQos refUTbTypeProfile
N/A
N/A
Used Transport Bearer Type

Profile Related to Basic
Priority
N/A
ULogicalIurQos
refUDedSrvTbProfil
N/A
e
N/A
Used Dedicated Service

Transport Bearer Qos Profile
UQosFunction
UQosFunction
N/A
N/A
QoS Function Object ID
UBasPri
UBasPri
N/A
N/A
QoS Basic Configuration

Object ID
UBasPri
basicPrio
N/A
N/A
Basic Priority
N/A
Power Offset of the

Maximum Downlink DPCH
Showing Different Basic
Priority
UBasPri
maxDlDpchPO
N/A
UBasPri
maxUlDpchPO
N/A
N/A
Power Offset of the

Maximum Uplink DPCH
Showing Different Basic
Priority
UBasPri
hspaEquHsUser
N/A
N/A
Equivalent HSPA Users
UBasPri
ulNormBitRate
N/A
N/A
DCH Uplink Nominal Bit

Rate
UBasPri
dlNormBitRate
N/A
N/A
DCH Downlink Nominal Bit

Rate
UBasPri
hsNormBitRate
N/A
N/A
HS-DSCH Downlink Nominal

Bit Rate
UBasPri
edchNormBitRate
N/A
N/A
E-DCH Uplink Nominal Bit

Rate
N/A
N/A
Basic Priority Mapping

Relationship Object ID
UBasPriMappin
UBasPriMapping
g
UBasPriMappin
arpPL
g
N/A
N/A
ARP Priority Level
UBasPriMappin
trafficClass
g
N/A
N/A
Traffic Class
UBasPriMappin
basicPrio
g
N/A
N/A
Basic Priority
USchPriMappin USchPriMappingPr
N/A
gProfile
ofile
N/A

Relationship Profile Object
ID
USchPriMappin
profileId
gProfile
N/A
N/A
Scheduling Priority Index
USchPriMappin
USchPriMapping
g
N/A
N/A

USchPriMappin
basicPrio
g
N/A
N/A
Basic Priority
USchPriMappin
bearerType
g
N/A
N/A
Radio Bearer Type
USchPriMappin
schPrio
g
N/A
N/A
Scheduling Priority
UAppPriMappin UAppPriMappingPr
N/A
gProfile
ofile
N/A

Relationship Profile Object
ID
UAppPriMappin
profileId
gProfile
N/A
N/A
Application Priority Index
UAppPriMappin intialAppPriUsingSc
N/A
gProfile
ene
N/A
Application Priority
Configuration Scene
UAppPriMappin
UAppPriMapping
g
N/A
N/A

UAppPriMappin
basicPrio
g
N/A
N/A
Basic Priority
UAppPriMappin
bearerType
g
N/A
N/A
Radio Bearer Type
UAppPriMappin
direction
g
N/A
N/A
Service Direction Used in

UAppPriMappin
rateClass
g
N/A
N/A
Rate Class
UAppPriMappin
appPri
g
N/A
N/A
Application Priority
UTbTypeProfile UTbTypeProfile
N/A
N/A
Transport Bearer Type

Priority Object ID
UTbTypeProfile profileId
N/A
N/A
Profile ID of Transport
Bearer Type Profile Related
to Basic Priority
UTbTypeProfile
intialTransportMode
N/A
Scene
N/A
Transmission Mode
UTbType
UTbType
N/A
N/A

Related to Basic Priority
Object ID
UTbType
basicPrio
N/A
N/A
Basic Priority
UTbType
bearerType
N/A
N/A
Radio Bearer Type
UTbType
tbType
N/A
N/A
UTbType
ipDscp
N/A
N/A
DSCP for IP
UTbType
ulResBwd
N/A
N/A
Uplink Reserved Bandwidth

for DCH I/B (or HSPA I/B)
Traffic
UTbType
dlResBwd
N/A
N/A
Downlink Reserved
Bandwidth for DCH I/B (or
HSPA I/B) Traffic
UDedSrvTbProfi
UDedSrvTbProfile
le
N/A
N/A
Dedicated Service Transport

Bearer Qos Profile Object ID
UDedSrvTbProfi
profileId
le
N/A
N/A
Transport Qos Profile

parameter Index
UDedSrvTbProfi intialTransportNetS
N/A
le
cene
N/A
Initial Transport Network

Scene
UDedSrvTb
UDedSrvTb
N/A
N/A

Bearer Qos Configuration
Object ID
UDedSrvTb
trafficCategory
N/A
N/A
Traffic Category
UDedSrvTb
tbType
N/A
N/A
UDedSrvTb
tbTypePara1
N/A
N/A
Transport Bearer Type 1
UDedSrvTb
tbTypePara2
N/A
N/A
UDedSrvTb
tbTypePara3
N/A
N/A
UDedSrvTb
tbTypePara4
N/A
N/A
UDedSrvTb
tbTypePara5
N/A
N/A
UDedSrvTb
tbTypePara6
N/A
N/A
UDedSrvTb
ipDscp
N/A
N/A
DSCP for IP
UDedSrvTb
iBUlResBwd
N/A
N/A

for I/B Traffic
UDedSrvTb
iBDlResBwd
N/A
N/A
Downlink Reserved
Bandwidth for I/B Traffic
UBPriAcProfile
UBPriAcProfile
N/A
N/A
Access Control Profile

Object ID
UBPriAcProfile
profileId
N/A
N/A
Basic Priority AC Index
UBPriAcProfile
intialloadscene
N/A
N/A
Initial Load Scene
UBPriAc
UBPriAc
N/A
N/A
Access Control Related to

Basic Priority Object ID
UBPriAc
basicPrio
N/A
N/A
Basic Priority Used in

Admission Control
UBPriAc
dchUlAcThresh
N/A
N/A
DCH Uplink AC Threshold
UBPriAc
dchDlAcThresh
N/A
N/A
DCH Downlink AC Threshold
UBPriAc
edchAcThresh
N/A
N/A
E-DCH AC Threshold
UBPriAc
hsdpaAcThresh
N/A
N/A
HSDPA AC Threshold
UBPriAc
mbmsAcThresh
N/A
N/A
MBMS AC Threshold
UBPriAc
threshRefCount
N/A
N/A
MBMS Load Threshold

Reference for Counting
UBPriAc
codeTreeResRto
N/A
N/A
Code Tree Reserved Ratio
N/A
N/A
User Authorized
PLMN+SNAC Information
Object ID
imsiMatchedDgtNu
N/A
m
N/A
The Imsi Matched Digits

Num
UImsiSnacFilter UImsiSnacFilter
UImsiSnacFilter
UImsiSnacFilter imsiMatchedDigit
N/A
N/A
The Imsi Matched Digit
UImsiSnacFilter sNACNum
N/A
N/A
Number of Shared Network

Code
UImsiSnacFilter sMCC
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
MCC of Shared Network
UImsiSnacFilter sMNC
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
MNC of Shared Network
UImsiSnacFilter sNAC
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
Shared Network Area Code
UWhiteImsiList
UWhiteImsiList
N/A
N/A
White IMSI List Object ID
UWhiteImsiList
whiteImsiNo
N/A
N/A
The Index of White IMSI List
UWhiteImsiList
imsiDgtNum
N/A
N/A
IMSI Digits Number in White

List for User Identification
UWhiteImsiList
imsiDgt
N/A
N/A
IMSI High-bit Digits in white

List for User Identification
UWhiteImsiList
vipInd
N/A
N/A
VIP Indication
UWhiteImsiList
basicPrio
N/A
N/A
Basic Priority for User in

White List
UWhiteImsiList
hspaSchPrio
N/A
N/A
HSPA Scheduling Priority for

User in White List
UWhiteImsiList
cgtSchPrio
N/A
N/A
Congestion Scheduling
Priority for User in White List
UWhiteImsiList
appPri
N/A
N/A
Application Priority for User

in White List
UWhiteImsiList
vipCsReDelayTimer N/A
N/A
Timer of Relocation Delay for

VIP's CS Service
UWhiteImsiList
vipPsReDelayTimer N/A
N/A
Timer of Relocation Delay for

VIP's PS Service
USnac
USnac
N/A
N/A

Object ID
USnac
snac
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
USnac
refULocationArea
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Used Location Area
UUeCnst
UUeCnst
N/A
N/A
UE Timers and Constants

Information Object ID
TS 25.331
Waiting Time After UE

Sending RRC
CONNECTION REQUEST
Message (T300)
UUeCnst
t300
T300
UUeCnst
n300
N300
TS 25.331
Maximum Number of
CONNECTION REQUEST
Message (N300)
UUeCnst
t312Idle
T312
TS 25.331
Waiting Time for Receiving

"In Sync" from L1 in Idle
Mode (T312 in Idle Mode)
UUeCnst
n312Idle
N312
TS 25.331
Maximum Number of "In

Sync" Received from L1 in
Idle Mode (N312 in Idle
Mode)
UUeCnst
t302
T302
TS 25.331

Sending CELL/URA
UPDATE Message (T302)
TS 25.331
Maximum Number of
Retransmissions of the
CELL/URA UPDATE
Message (N302)
TS 25.331

Sending UE CAPABILITY
INFORMATION Message
(T304)
UUeCnst
UUeCnst
n302
t304
N302
T304
UUeCnst
n304
N304
TS 25.331
Maximum Number of
Retransmissions of the UE
CAPABILITY INFORMATION
Message (N304)
UUeCnst
t305
T305
TS 25.331
Period of Cell/URA Update

When UE is in
CELL_FACH/CELL_PCH/
URA_PCH State (T305)
UUeCnst
t307
T307
TS 25.331
Waiting Time for Cell

Reselection After UE is out
of Service (T307)
TS 25.331
Waiting Time After Sending

RRC CONNECTION
RELEASE COMPLETE
Message in CELL_DCH
State (T308)
TS 25.331
Waiting Time After

Requesting Connection
Establishment in Other
System (eg. GSM) (T309)
TS 25.331
Waiting Time for Receiving

"In Sync" from L1 in
Connected Mode (T312 in
Connected Mode)
TS 25.331
Maximum Number of "In

Sync" Received from L1 in
Connected Mode (N312 in
Connected Mode)
UUeCnst
UUeCnst
UUeCnst
UUeCnst
t308
t309
t312Connected
n312Connected
T308
T309
T312
N312
UUeCnst
t313
T313
TS 25.331
Waiting Time After DPCCH

Established in CELL_DCH
State Losing Synchronization
(T313)
UUeCnst
n313
N313
TS 25.331
Maximum Number of
Successive "Out of Sync"
Received from L1 (N313)
UUeCnst
t314
T314
TS 25.331
UUeCnst
t315
T315
TS 25.331
UUeCnst
n315
N315
TS 25.331
Waiting Time for Completion

of Cell Update When Radio
Link Fails and Radio Bearer
(s) Associated with T314
Exist (T314)
Waiting Time for Completion
of Cell Update When Radio
Link Fails and Radio Bearer
(s) Associated with T315
Exist (T315)
Maximum Number of
Successive "In Sync"
Received from L1 During
T313 is Activated (N315)
UUeCnst
t316
T316
TS 25.331
Waiting Time for Cell

Selection/Reselection After
UE is out of Service in
CELL_PCH/URA_PCH State
(T316)
UUeCnst
t323Swch
N/A
TS 25.331
Switch of T323 Broadcasting
UUeCnst
t323
T323
TS 25.331
Waiting Time of UE Sending

message SIGNALING
CONNECTION RELEASE
INDICATION (with Cause)
(T323)
UCnInfo
UCnInfo
N/A
N/A
CN NAS System Information

Object ID
UCnInfo
cnDomain
N/A
N/A
CN Domain Supported
UCnInfo
attIndCs
ATT
TS 24.008
IMSI Attach and Detach

Indicator
UCnInfo
nmoPs
NMO
TS 24.008
Network Mode of Operation
UCnInfo
t3212Cs
T3212
TS 24.008
Timer for Periodic Location

Update (T3212)
kcs
CN domain
specific DRX
cycle length
coefficient
TS 25.331
CS Domain DRX Cycle

Length Coefficient
UCnInfo
kps
CN domain
specific DRX
cycle length
coefficient
TS 25.331
PS Domain DRX Cycle

Length Coefficient
UCnInfo
Modification
period
mbmsModPrdCoeff coefficient;
Modification
Period
TS 25.331;
TS 25.433;
TS 25.346
Modification Period
Coefficient for MBMS
UIuCnst
UIuCnst
N/A
Iu Interface Timers and

Constants Information
Object ID
UCnInfo
N/A
TS 25.413
SRNC Wait Time for

Relocation Preparation
UIuCnst
tRelocprep
TRELOCprep
UIuCnst
tRelocoverall
TRELOCoverall TS 25.413
SRNC Overall Protective

Time for Relocation
UIuCnst
tQueuing
N/A
N/A
Maximum Time for RAB

Queuing in RNC
UIuCnst
tDatafwd
TDATAfwd
TS 25.413
Start time to send the

forwarded PDCP SDUs in
the target RNC during
relocation of SRNS
UIuCnst
tRafc
TRafC
TS 25.413
Maximum Waiting Time for

RESET in RNC
UIuCnst
tRatc
TRatC
TS 25.413
Timer Before Sending

RESET Response to CN
UIuCnst
tResetDelay
N/A
N/A
Timer for Sending

RESOURCE RESET
Response to CN
UIuCnst
tResetwait
N/A
N/A
Timer forRESOURCE
RESET Response from CN
UIuCnst
tigOR
TigOR
TS 25.413
Timer for Ignoring all

OVERLOAD Messages or
Signalling Point Congested
Information (TigOR)
UIuCnst
tinTR
TinTR
TS 25.413
Timer for Not Allowing to

Increase Traffic (TinTR)
UIuCnst
nRepeatresrst
N/A
N/A
Maximum Number of
RESOURCE RESET
Message
UIuCnst
nRepeatrst
N/A
N/A
Maximum Number of
RESET Message
UDrbcProfile
UDrbcProfile
N/A
N/A
Dynamic Radio Bearer

Object ID
UDrbcProfile
profileId
N/A
N/A
Drbc Strategy Configuration

Index
UDrbcProfile
drbcStragyName
N/A
N/A
Drbc Strategy Name
UDrbc
UDrbc
N/A
N/A

Control Information Object
ID
N/A
Event 4B Counter Threshold

for HSPA Using DTX/DRX or
CELL_FACH using DRX to
PCH or IDLE Shared by
Uplink and Downlink
UDrbc
dxHsBo0E4bThd
N/A
UDrbc
fachE4aThd
N/A
N/A
Event 4A Counter Threshold

for CELL_FACH to
CELL_DCH Shared by
Uplink and Downlink
UDrbc
dchE4aThd
N/A
N/A

for Increasing Rate on DCH
or DCH->HSPA
UDrbc
dchE4bThd
N/A
N/A

for Decreasing Rate on DCH
N/A

for CELL_DCH to PCH
Shared by Uplink and
Downlink
N/A

for CELL_FACH without
DRX to PCH Shared by
Uplink and Downlink
N/A

for CELL_DCH to Idle
Shared by Uplink and
Downlink
N/A

for CELL_FACH without
DRX to Idle Shared by
Uplink and Downlink
UDrbc
UDrbc
UDrbc
UDrbc
dToPchThd
fToPchThd
dToIdleThd
fToIdleThd
N/A
N/A
N/A
N/A
UDrbc
pchHoldTimeThr
N/A
N/A
Time Threshold for

CELL_PCH or URA_PCH to
Idle
UDrbc
dToFachThd
N/A
N/A

for Cell_Dch to Cell_FACH
UDrbc
ettiEaThd
N/A
N/A

for E-TTI Switching from
10ms to 2ms
UDrbc
ettiEbThd
N/A
N/A

for E-TTI Switching from
2ms to 10ms
Event A Counter Threshold
for PS on DL DCH or DL
AMR Decreasing Rate on DTCP
Event B Counter Threshold
for Restriction PS Increasing
Rate on DL DCH or
Triggering DL AMR
Increasing Rate Based on DTCP
UDrbc
dtcpEaThd
N/A
N/A
UDrbc
dtcpEbThd
N/A
N/A
UDrbc
fachSwch
N/A
N/A
Switch of Transferring to
CELL_FACH
UDrbc
pchSwch
N/A
N/A
Switch of
URA_PCH/CELL_PCH
Support
UDrbc
deltaNumE4B0Thd N/A
N/A
Increment Times of Event

4B0 for UE Which is not
sensitive for Battery
Consumption Transferred to
URA_PCH/CELL_PCH or
Idle state
UDrbc
dtxdrxToFachThd
N/A
N/A

for Cell_Dch to Cell_FACH
for UE Using Dtx/Drx
UGloAc
UGloAc
N/A
N/A
Global Access Control

UGloAc
qLength
N/A
N/A
True Queue Length
UGloAc
tTrueQ
N/A
N/A
Time of True Queue for

Congested Service in RAB
Setup Process
UGloAc
tTrueQReloc
N/A
N/A
Time of True Queue for

Congested Service
Relocating into UTRAN
UGloAc
tTrueQForced
N/A
N/A
Maximum Time in the True

Queue when Service be
Forced into Queue
UGloAc
amrDnRateAcSwch N/A
N/A
Switch of AMR Traffic Readmission after AMR Rate

Decrease
UGloAc
forcQueSwiAMR
N/A
N/A
Forced Queue Switch for

AMR Service
UGloAc
forcQueSwiCS64
N/A
N/A
Forced Queue Switch for CS

64kbps service
UHspa
UHspa
N/A
N/A
Hspa Configuration Object

ID
UHspa
rncFdpchSupInd
N/A
N/A
RNC F-DPCH Support

Indicator
UHspa
rncEfdpchSupInd
N/A
N/A
RNC Enhanced F-DPCH

Support Indicator
UHspa
rncMimo64QamInd N/A
N/A
RNC MIMO and DL64QAM

Combined Capability
Support Indicator
UHspa
codeReAssInd
N/A
N/A
DPCH Code Re-Assign

Support Indicator
UHspa
codeReAssPrd
N/A
N/A
DPCH Code Re-Assign

Period
UHspa
dtxDrxSwch
N/A
N/A
DTX/DRX Switch
UHspa
rtDtxSwch
N/A
N/A
DTX Switch for Speech
UHspa
nrtDtxSwch
N/A
N/A
DTX Switch for NRT
UHspa
rtDrxSwch
N/A
N/A
DRX Switch for Speech
UHspa
nrtDrxSwch
N/A
N/A
DRX Switch for NRT
UHspa
hsscLessSwch
N/A
N/A
HS-SCCH Less Switch
UHspa
nvHsscLessSwch
N/A
N/A
HS-SCCH Less Switch for

Non-VoIP/AMR
UHspa
rncDlEnL2Ind
N/A
N/A
RNC Downlink Enhanced

Layer 2 Support Indicator
UHspa
rncUlEnL2Ind
N/A
N/A
RNC Uplink Enhanced Layer

2 Support Indicator
UHspa
rnc64QAMInd
N/A
N/A
RNC 64QAM Support

Indicator
UHspa
rncMIMOInd
N/A
N/A
RNC MIMO Support

Indicator
UHspa
hsGBRLimitSwi
N/A
N/A
Switch for Limiting HSDPA

GBR Resource Consumption
UHspa
rlcSizeSuptType
N/A
N/A
Support Type of Downlink

RLC Flexible PDU Size
Format
UHspa
ulRlcSizeSptType
N/A
N/A
Support Type of Uplink RLC

Flexible PDU Size Format
UHspa
rncDcMimoSupInd
N/A
N/A
RNC DC+MIMO Support

Indicator
UHspa
dcHsdschSptInd
N/A
N/A
Dual-Cell HS-DSCH Support

Indication
UHspa
poEhichSerRls2
N/A
N/A
UHspa
poEhichSerRls10
N/A
N/A
UHspa
poEhichNoSerRl2
N/A
N/A
UHspa
poEhichNoSerRl10 N/A
N/A
UHspa
poErgchSerRls2
N/A
N/A
UHspa
poErgchSerRls10
N/A
N/A
UHspa
poErgchNonSerRls N/A
N/A
UHspa
eagchPOUptSwch
N/A
N/A
Power Offset Relative to EHICH in Single Link

Condition for E-HICH of
Serving RLS in Macro
Diversity Condition (2ms TTI)
Diversity Condition (10ms
TTI)
Non-serving RLS in Macro
Non-serving RLS in Macro
TTI)
Power Offset Relative to ERGCH in Single Link
Condition for E-RGCH of
Power Offset Relative to ERGCH in Single Link
Condition for E-RGCH of
TTI)
Power Offset Relative to
10ms TTI E-RGCH in Single
Link Condition for E-RGCH
of Non-serving RLS in Macro
Diversity Condition
Dynamic Updating Switch of
E-AGCH Power Offset
UHspa
UHspa
hsupaCtrChUptPrd N/A
event1fHsInd
N/A
EDPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
EDPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
N/A
HSUPA Control Channel

Number Update Period
N/A
Indicator for Whether to

Judge Event 1F Condition
When the Service is Setup
on HSPA
TS 25.331;
TS 25.433;
TS 25.423
Quantified EDPCCH/DPCCH Power

Offset (10ms TTI)
TS 25.331;
TS 25.433;
TS 25.423

Offset (2ms TTI)
TS 25.433;
TS 25.331
Power Offset for Scheduling

Info (2ms TTI)
TS 25.433;
TS 25.331

Info (10ms TTI)
UHspa
edpcchPOTti10
UHspa
edpcchPOTti2
UHspa
scheInfoPOTti2
UHspa
scheInfoPOTti10
UHspa
ackPwrOffset
ACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH ACK Power

Offset for Single Radio Link
or Intra-NodeB Handover
UHspa
anackRepFactor
ACK-NACK
Repetition
Factor
TS 25.433;
TS 25.423
ACK-NACK Repetition
Factor
UHspa
nackPwrOffset
NACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH NACK Power

UHspa
cqiCycle
CQI Feedback
Cycle k
TS 25.433;
TS 25.423
CQI Feedback Cycle
UHspa
cqiPwrOffset
CQI Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH CQI Power

UHspa
cqiRepFactor
CQI Repetition
Factor
TS 25.433;
TS 25.423
CQI Repetition Factor
UHspa
edchRefPO
E-DCH
Reference
Power Offset
TS 25.433;
TS 25.423
E-DCH Reference Power

Offset
UHspa
tpcErrTarget
N/A
N/A
TPC Command Error Rate

Target
UHspa
hsdpaCmAssoMod
N/A
e
N/A
HSDPA Associate CM
Method
UHspa
hsupaCmAssoMod
N/A
e
N/A
HSUPA Associate CM
Method
UHspa
interAckPwrOfst
ACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH ACK Power

Offset for Inter-NodeB
Handover
UHspa
interCqiPwrOfst
CQI Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH CQI Power

Handover
UHspa
interNackPwrOfst
NACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH NACK Power

Handover
UHspa
t1d
N/A
N/A
Timer for Event 1D in HSPA

or MBMS
UHspa
codeUptPrdUnit
N/A
N/A
Code Update Period Unit
UHspa
codeUptPrdms
N/A
N/A
Code Update Period

(millisecond)
UHspa
codeUptPrds
N/A
N/A
Code Update Period

(second)
UHspa
hsdschTotPwrMeth N/A
N/A
HSPA Total Downlink Power

Allocation Method
UHspa
hsdpaIurMBR
N/A
N/A
Maximum Bit Rate of HSDPA

Across Iur Interface
UCommEdch
UCommEdch
N/A
N/A
Common EDCH
Configuration Object ID
TS 25.331;
TS 25.433

Offset (10ms TTI)
TS 25.331;
TS 25.433

Offset (2ms TTI)
UCommEdch
edpcchPOTti10
UCommEdch
edpcchPOTti2
EDPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
EDPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
TS 25.433;
TS 25.331

Info (2ms TTI)
TS 25.433;
TS 25.331

Info (10ms TTI)
ACK Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH ACK Power

anackRepFactor
ACK-NACK
Repetition
Factor
TS 25.433;
TS 25.331
ACK-NACK Repetition
Factor
UCommEdch
nackPwrOffset
NACK Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH NACK Power

UCommEdch
cqiCycle
CQI Feedback
Cycle k
TS 25.433;
TS 25.331
CQI Feedback Cycle
UCommEdch
cqiPwrOffset
CQI Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH CQI Power

UCommEdch
cqiRepFactor
CQI Repetition
Factor
TS 25.433;
TS 25.331
CQI Repetition Factor
UCommEdch
edchRefPO
E-DCH
Reference
Power Offset
TS 25.433
E-DCH Reference Power

Offset
UCommEdch
tpcErrTarget
F-DPCH TPC
command error TS 25.331
rate target
TPC Command Error Rate

Target
UCommEdch
cEdchMultiSwi
N/A
N/A
Common E-DCH MAC-d

Flow Multiplexing Switch
ettiComEdch
E-DCH
Transmission
Time Interval;
E-TTI
TS 25.331;
TS 25.433;
TS 25.423
Common E-DCH
Transmission Time Interval
UCommEdch
scheInfoPOTti2
UCommEdch
scheInfoPOTti10
UCommEdch
ackPwrOffset
UCommEdch
UCommEdch
UCommEdch
UCommEdch
UCommEdch
UCommEdch
UCommEdch
ulLchTypeInd
N/A
E-DCH MAC-d
flow power
cEdchHarqPOTti2 offset; E-DCH
HARQ Power
Offset FDD
E-DCH MAC-d
flow power
cEdchHarqPOTti10 offset; E-DCH
HARQ Power
Offset FDD
E-DCH MAC-d
flow power
cEdchMaxRetrTti2 offset; E-DCH
HARQ Power
Offset FDD
E-DCH MAC-d
flow power
cEdchMaxRetrTti10 offset; E-DCH
HARQ Power
Offset FDD
N/A
Logical Channel Type

Indication for Common EDCH MAC-d Flow
TS 25.331;
TS 25.433;
TS 25.423
HARQ Power Offset for

Common E-DCH MAC-d
Flow (2ms TTI)
TS 25.331;
TS 25.433;
TS 25.423
HARQ Power Offset for

Common E-DCH MAC-d
Flow (10ms TTI)
TS 25.331;
TS 25.433;
TS 25.423
Maximum Number of
Retransmissions for
Common E-DCH MAC-d
Flow (2ms TTI)
TS 25.331;
TS 25.433;
TS 25.423
Maximum Number of
Retransmissions for
Common E-DCH MAC-d
Flow (10ms TTI)
UCommEdch
cEdchMaxRlcSize
Largest UL RLC
TS 25.331
PDU size
Common E-DCH Maximum

Uplink RLC PDU Size
UCommEdch
cEdchMinRlcSize
Minimum UL
RLC PDU size
TS 25.331
Common E-DCH Minimum

Uplink RLC PDU Size
UCommEdch
ulEfachSF
N/A
N/A
Spreading Factor Supported

by Uplink Enhanced
CELL_FACH
UCommEdch
happyBitDelCEdch
Happy bit delay TS 25.331;

condition
TS 25.321
Happy Bit Delay for Common

E-DCH
UGbrResLimitPr UGbrResLimitProfil
N/A
ofile
e
N/A
Limiting HSDPA GBR

Resource Consumption
Profile Object ID
UGbrResLimitPr
profileId
ofile
N/A
N/A
Limiting HSDPA GBR

Profile ID
UGbrResLimit
N/A
N/A
Limiting HSDPA GBR

UGbrResLimit
UGbrResLimit
UGbrResLimit
hsGBRLevNum
hsGBRLev
N/A
N/A
N/A
Guaranteed Bit Rate Level

Number of HSDPA Services
for Limiting HSDPA GBR
N/A
Guaranteed Bit Rate Levels

of HSDPA Services for
Limiting HSDPA GBR
UGbrResLimit
ueHsReqPwrUplim N/A
N/A
UE HS-DSCH Required
Power Upper Limit for
Limiting HSDPA GBR
UMbms
UMbms
N/A
N/A
MBMS Configuration Object

ID
UMbms
sOnPTP
N/A
N/A
S Traffic on PTP or PTM

Switch
UMbms
bOnPTP
N/A
N/A
B Traffic on PTP or PTM

Switch
UMbms
mbmsMinRate
N/A
N/A
The Minimum Rate

Threshold of the SCCPCH
Setup for MBMS
UMbms
mschSptSwitch
N/A
N/A
MSCH Supported Switch
UMbms
sFreqConvSwch
N/A
N/A
S Traffic Frequency
Converge Switch
UMbms
bFreqConvSwch
N/A
N/A
B Traffic Frequency
Converge Switch
UMbms
pwrForSoftCom
N/A
N/A
SCCPCH Power Offset for

Soft Combining
UMbms
pwrForSelCom
N/A
N/A
SCCPCH Power Offset for

Selective Combining
UMbms
threshForHalfIsd
N/A
N/A
Threshold for Cell in Halfisland Status
UMbms
threshForIsd
N/A
N/A
Threshold for Cell in Island

Status
UMbms
dlMbmsDropSw
N/A
N/A
Downlink Switch for

Dropping MBMS Services
UMbms
urapchCount
Connected
mode counting
scope
TS 25.331
Counting Scope for

URA_PCH
UMbms
cellpchCount
Connected
mode counting
scope
TS 25.331
Counting Scope for

Cell_PCH
UMbms
cellfachCount
Connected
mode counting
scope
TS 25.331
Counting Scope for

Cell_FACH
UMbms
pThreUENum
N/A
N/A
UE Number Threshold for

PTP and PTM Switch
TS 25.331
Waiting Time for RRC

CONNECTION SETUP
Message When MBMS is
Used (T318)
UMbms
t318
T318
UMbms
mbmsIubMultSwch N/A
N/A
MBMS Iub Transport Bearer

Multiplex Switch
UDtxDrxProfile
UDtxDrxProfile
N/A
N/A
UE DTX/DRX Profile Object

ID
UDtxDrxProfile
profileId
N/A
N/A
Index
UDtxDrx
UDtxDrx
N/A
N/A
Object ID
UDtxDrx
dtxCyc1Tti2
TS 25.331;
UE DTX cycle 1 TS 25.423;
TS 25.433
UE DTX Cycle 1 for 2ms TTI
UDtxDrx
dtxCyc1Tti10
TS 25.331;
TS 25.433
UE DTX Cycle 1 for 10ms

TTI
UDtxDrx
dtxCyc2Tti2
TS 25.331;
TS 25.433
UE DTX Cycle 2 for 2ms TTI
UDtxDrx
dtxCyc2Tti10
TS 25.331;
TS 25.433
UE DTX Cycle 2 for 10ms

TTI
UDtxDrx
macDtxCycTti2
MAC DTX
Cycle
TS 25.331;
TS 25.423;
TS 25.433
MAC DTX Cycle for 2ms TTI
UDtxDrx
macDtxCycTti10
MAC DTX
Cycle
TS 25.331;
TS 25.423;
TS 25.433
MAC DTX Cycle for 10ms

TTI
UDtxDrx
dtxCyc2InactTrd2
Inactivity
TS 25.331;
Threshold for
TS 25.423;
UE DTX cycle 2 TS 25.433
Inactivity Threshold for UE

DTX Cycle 2 for 2ms TTI
UDtxDrx
dtxCyc2InactTrd10
Inactivity
TS 25.331;
Threshold for
TS 25.423;
UE DTX cycle 2 TS 25.433

DTX Cycle 2 for 10ms TTI
UDtxDrx
dtxLongPreLegth
TS 25.331;
UE DTX long
TS 25.423;
preamble length
TS 25.433
UE DTX Long Preamble

Length
UDtxDrx
macInactThresh
MAC Inactivity
Threshold
UDtxDrx
cqiDtxTimer
TS 25.331;
CQI DTX Timer TS 25.423;
TS 25.433
UDtxDrx
dpcchBurst1
UE DPCCH
burst_1
TS 25.331;
TS 25.423;
TS 25.433
TS 25.331;
TS 25.423;
TS 25.433
MAC Inactivity Threshold
CQI DTX Timer
UE DPCCH Burst_1
UDtxDrx
dpcchBurst2
UE DPCCH
burst_2
TS 25.331;
TS 25.423;
TS 25.433
UE DPCCH Burst_2
UDtxDrx
drxCycle
UE DRX cycle
TS 25.331;
TS 25.423;
TS 25.433
UE DRX Cycle
UDtxDrx
drxCycInactTrd
Inactivity
Threshold for
UE DRX cycle
TS 25.331;
TS 25.423;
TS 25.433

DRX Cycle
UDtxDrx
grantMonInactTrd
Inactivity
Threshold for
UE Grant
Monitoring
TS 25.331;
TS 25.423;
TS 25.433

Grant Monitoring
UDtxDrx
drxGrantMon
UE DRX Grant
Monitoring
TS 25.331;
TS 25.423;
TS 25.433
UE DRX Grant Monitoring
USrvPcProfile
USrvPcProfile
N/A
N/A
Power Control Profile

Related to Service Object ID
USrvPcProfile
profileId
N/A
N/A
Service Related Power

Control Profile ID
USrvPcProfile
intialloadscene
N/A
N/A
Initial Load Scene
USrvPc
USrvPc
N/A
N/A
Power Control Related to

Service Object ID
USrvPc
srvType
N/A
N/A
Sub-service Type
USrvPc
ulIlPcAlg
Power Control
Algorithm
TS 25.331
Uplink Inner Loop Power

Control Algorithm
USrvPc
tpcStepSize
TPC step size
TS 25.331
Step Size of Uplink Inner

Loop Power Control
USrvPc
ulSirTargUpStep
N/A
N/A
Uplink SIR Target Up Step

Size
USrvPc
ulSirTargDnStep
N/A
N/A
Uplink SIR Target Down Step

Size
USrvPc
maxSirTargDnStep
N/A
N/A
Uplink SIR Target Maximum

Down Step Size
USrvPc
maxSirTargUpStep
N/A
N/A

Up Step Size
USrvPc
tpcDlStep
FDD TPC
Downlink Step
Size;
TS 25.433;
TS 25.423
Step Size of Downlink Inner

Loop Power Control
USrvPc
blerTarget
BLER Quality
value; BLER
TS 25.331;
TS 25.423
BLER Target
USrvPc
errorThresh
N/A
N/A
Error Transport Block

Number Threshold
USrvPc
blerAccpPeriod
N/A
N/A
Tolerance BLERPeriod
N/A
Threshold of HARQ Failure

Indication Number to Adjust
SIR Target Upward (2ms ETTI)
USrvPc
thrHarqFailTti2
N/A
USrvPc
thrHarqFailTti10
N/A
N/A

USrvPc
nhrThrUpTti10
N/A
N/A
NHR Threshold to Adjust SIR

Target Upward (10ms E-TTI)
USrvPc
nhrThrDownTti10
N/A
N/A

Target Downward (10ms ETTI)
USrvPc
nhrThrUpTti2
N/A
N/A

USrvPc
nhrThrDownTti2
N/A
N/A

USrvPc
upThrSampNumTti
N/A
10
N/A
Threshold of Sample
Number to Adjust SIR Target
Upward (10ms E-TTI)
USrvPc
dwThrSampNumTti
N/A
10
N/A
Threshold of Sample
Downward (10ms E-TTI)
USrvPc
upThrSampNumTti
N/A
2
N/A
Threshold of Sample
Upward (2ms E-TTI)
USrvPc
dwThrSampNumTti
N/A
2
N/A
Threshold of Sample
USrvPc
qePhyBerTarNorm
N/A
N/A
Physical Channel BER

Target For Normal Mode
USrvPc
qePhyBerTarSil
N/A
N/A

Target For Silent Mode
USrvPc
qeCntThres
N/A
N/A
The Number Threshold of

Physical Channel BER Less
Than or Equal BER Target
USrvPc
berErrorTbThresh
N/A
N/A
USrvPc
berTbThresh
N/A
N/A
USrvPc
berTargDnStep
N/A
N/A

Number Threshold for BER
Target Adjust in Fast OLPC
SIR Target Downward
Adjustment Based on BER
Transport Block Number
Threshold for BER Target
Adjust in Fast OLPC SIR
Target Downward
BER Target Down Step Size
in Fast OLPC SIR Target
Downward Adjustment
Based on BER
USrvPc
berTargUpStep
N/A
N/A
BER Target Up Step Size in

Downward Adjustment
Based on BER
USrvPc
swchAdaptiveStep
N/A
N/A
Uplink Outer Loop PC SIR

Target Adaptive Down Step
Size Switch
USrvPc
maxBerTarget
N/A
N/A
Maximum BER Target in

Downward Adjustment
Based on BER
USrvPc
minBerTarget
N/A
N/A
Minimum BER Target in Fast

OLPC SIR Target Downward
USrvPc
ulOlPcQESwchSil
N/A
N/A
Uplink Outer Loop PC QE

Switch For Silent Mode
USrvPc
edchHarqPOFdd
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
E-DCH HARQ Power Offset

FDD
USrvPc
addiSIRDownStep
N/A
N/A
Additional SIR Target Down

Step Size
USrvPc
ulSirStep
N/A
N/A

Size for R99
USrvPc
ulSirStepTti2
N/A
N/A

Size for HSUPA (2ms E-TTI)
USrvPc
ulSirStepTti10
N/A
N/A

Size for HSUPA (10ms ETTI)
USrvPc
targetRetranNum
N/A
N/A
Target Number of HARQ

Retransmission
USrvPc
fpTargErrorTti2
N/A
N/A
Target Rate of Error Frame

(2ms E-TTI)
USrvPc
fpTargErrorTti10
N/A
N/A

(10ms E-TTI)
USrvPc
berTargetUpThres
N/A
N/A
BER Target Up Threshold
USrvPc
berTargetDnThres
N/A
N/A
BER Target Down Threshold
USrvPc
timWinSize
N/A
N/A
Time Window Size
USrvPc
ttiNumThreshOpen N/A
N/A
TTI threshold of Opening

BER Algorithm
USrvPc
ttiNumThreshCls
N/A
N/A
TTI threshold of Closing

BER Algorithm
USrvPc
berCntThres
N/A
N/A

Trigging SIRtarget
Adjustment
USrvPc
olPCPrioSwitch
N/A
N/A
Priority Outer Loop PC

Switch
UWhiteSrvPc
UWhiteSrvPc
N/A
N/A

Service Object ID
UWhiteSrvPc
srvType
N/A
N/A
Sub-service Type
UWhiteSrvPc
ulSirTargUpStep
N/A
N/A

Size
UWhiteSrvPc
ulSirTargDnStep
N/A
N/A
Uplink SIR Target Down Step

Size
UWhiteSrvPc
maxSirTargDnStep
N/A
N/A

Down Step Size
UWhiteSrvPc
maxSirTargUpStep
N/A
N/A

Up Step Size
UWhiteSrvPc
swchAdaptiveStep
N/A
N/A
Uplink Outer Loop PC SIR

Target Adaptive Down Step
Size Switch
UWhiteSrvPc
maxDlDpchPwr
Maximum DL
Power;
Maximum DL
TX Power
TS 25.433;
TS 25.423
DPCH Maximum DL Power
UWhiteSrvPc
minDlDpchPwr
Minimum DL
Power
TS 25.433;
TS 25.423
DPCH Minimum DL Power
UWhiteSrvPc
dpcchPilotEbN0
N/A
N/A
DPCCH Pilot Field Eb/N0
UWhiteSrvPc
maxUlDpchPwr
Maximum
allowed UL TX
power;
Maximum
Allowed UL Tx
Power
TS 25.331;
TS 25.423
Maximum Allowed Uplink

DPCH Transmission Power
UWhiteSrvPc
ulInitSIR
UL SIR Target
TS 25.433;
TS 25.423
Uplink Initial SIR Target
UWhiteSrvPc
ulMaxSIR
Maximum
Uplink SIR
TS 25.423
Maximum Uplink SIR Target
UWhiteSrvPc
ulMinSIR
Minimum Uplink
TS 25.423
SIR
Minimum Uplink SIR Target
UWhiteSrvPc
blerTarget
BLER Quality
value; BLER
TS 25.331;
TS 25.423
BLER Target
UWhiteSrvPc
errorThresh
N/A
N/A

Number Threshold
UWhiteSrvPc
UWhiteSrvPc
blerAccpPeriod
thrHarqFailTti10
N/A
N/A
N/A
Tolerance BLERPeriod
N/A

UWhiteSrvPc
thrHarqFailTti2
N/A
N/A

UWhiteSrvPc
nhrThrDownTti10
N/A
N/A

UWhiteSrvPc
nhrThrUpTti10
N/A
N/A

UWhiteSrvPc
upThrSampNumTti
N/A
10
N/A
Threshold of Sample
Upward (10ms E-TTI)
UWhiteSrvPc
dwThrSampNumTti
N/A
10
N/A
Threshold of Sample
UWhiteSrvPc
nhrThrDownTti2
N/A
N/A

UWhiteSrvPc
nhrThrUpTti2
N/A
N/A

UWhiteSrvPc
upThrSampNumTti
N/A
2
N/A
Threshold of Sample
Upward (2ms E-TTI)
UWhiteSrvPc
dwThrSampNumTti
N/A
2
N/A
Threshold of Sample
UWhiteSrvPc
ulOlPcQESwchSil
N/A
Uplink Outer Loop PC QE

Switch For Silent Mode
N/A
UWhiteSrvPc
qePhyBerTarSil
N/A
N/A

Target For Silent Mode
UWhiteSrvPc
qeCntThres
N/A
N/A

Physical Channel BER Less
Than or Equal BER Target
UWhiteSrvPc
edchHarqPOFDD
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
E-DCH HARQ Power Offset

FDD
UWhiteSrvPc
addiSIRDownStep
N/A
N/A
Additional SIR Target Down

Step Size
UWhiteSrvPc
initBlerSIR
N/A
N/A
Initial Value for BLER Based

SIR Target
UWhiteSrvPc
initSirAdd
N/A
N/A
Initial Value for Additional

SIR Target
UWhiteSrvPc
ulSirStep
N/A
N/A

Size for R99
UWhiteSrvPc
ulSirStepTti2
N/A
N/A

Size for HSUPA (2ms E-TTI)
UWhiteSrvPc
ulSirStepTti10
N/A
N/A

Size for HSUPA (10ms ETTI)
UWhiteSrvPc
targetRetranNum
N/A
N/A
Target Number of HARQ

Retransmission
UWhiteSrvPc
fpTargErrorTti2
N/A
N/A

(2ms E-TTI)
UWhiteSrvPc
fpTargErrorTti10
N/A
N/A

(10ms E-TTI)
UWhiteSrvPc
berTargetUpThres
N/A
N/A
BER Target Up Threshold
UWhiteSrvPc
berTargetDnThres
N/A
N/A
BER Target Down Threshold
UWhiteSrvPc
berCntThres
N/A
N/A

Trigging SIRtarget
Adjustment
USrvDivPc
USrvDivPc
N/A
N/A

Service and Diversity Mode
Object ID
txDivMod
Diversity Mode;
TS 25.433;
Transmit
TS 25.423;
Diversity
TS 25.211
Indicator
Transmit Diversity Mode
USrvDivPc
maxDlDpchPwr
Maximum DL
Power;
Maximum DL
TX Power
TS 25.433;
TS 25.423
DPCH Maximum DL Power
USrvDivPc
minDlDpchPwr
Minimum DL
Power
TS 25.433;
TS 25.423
DPCH Minimum DL Power
USrvDivPc
dpchPO1
PO1
TS 25.433;
TS 25.423
DPCH PO1
USrvDivPc
dpchPO2
PO2
TS 25.433;
TS 25.423
DPCH PO2
USrvDivPc
USrvDivPc
dpchPO3
PO3
TS 25.433;
TS 25.423
DPCH PO3
USrvDivPc
dpcchPilotEbN0
N/A
N/A
DPCCH Pilot Field Eb/N0
TS 25.331;
TS 25.423
Maximum Allowed Uplink

DPCH Transmission Power
TS 25.433;
TS 25.423
Uplink Initial SIR Target
Maximum
allowed UL TX
power;
Maximum
Allowed UL Tx
Power
UL SIR Target
USrvDivPc
maxUlDpchPwr
USrvDivPc
ulInitSIR
USrvDivPc
ulMaxSIR
Maximum
Uplink SIR
TS 25.423
Maximum Uplink SIR Target
USrvDivPc
ulMinSIR
Minimum Uplink
TS 25.423
SIR
Minimum Uplink SIR Target
USrvDivPc
eagchPOTti2
E-AGCH Power TS 25.433;

Offset
TS 25.423
E-AGCH Power Offset for

TTI 2ms
USrvDivPc
eagchPOTti10
E-AGCH Power TS 25.433;

Offset
TS 25.423
E-AGCH Power Offset for

TTI 10ms
USrvDivPc
ergchPOTti2
E-RGCH Power TS 25.433;

Offset
TS 25.423
E-RGCH Power Offset for

TTI 2ms in Single Link
Condition
USrvDivPc
ergchPOTti10
E-RGCH Power TS 25.433;

Offset
TS 25.423
E-RGCH Power Offset for

TTI 10ms in Single Link
Condition
USrvDivPc
ehichPOTti2
E-HICH Power
Offset
TS 25.433;
TS 25.423
E-HICH Power Offset for TTI

2ms in Single Link Condition
USrvDivPc
ehichPOTti10
E-HICH Power
Offset
TS 25.433;
TS 25.423
E-HICH Power Offset for TTI

10ms in Single Link
Condition
USrvDivPc
pwrForSglCell
Max FACH
Power
TS 25.433
SCCPCH Power for Single

Cell Reception
USrvDivPc
pwrForHalfIsd
Max FACH
Power
TS 25.433
SCCPCH Power for Cell in

Half-island Status
USrvDivPc
initBlerSIR
N/A
N/A
Initial Value for BLER Based

SIR Target
USrvDivPc
initSirAdd
N/A
N/A
Initial Value for Additional

SIR Target
UIubLink
refModule
N/A
N/A
Used Module
UIubLink
procInstancNo
N/A
N/A
Process Id of NodeB
Attached CCMP
UIubLink
nodeBType
N/A
N/A
NodeB Type
UIubLink
hsSharMethod
N/A
N/A
Co-NodeB HS-PDSCH Code

Sharing Method
UIubLink
hsdschSuptCgtDetI
N/A
nd
N/A
Support R5/R6 Congestion

Detection Indicator (HSDSCH)
UIubLink
edchSuptCgtDetInd N/A
N/A
Support R5/R6 Congestion

Detection Indicator (E-DCH)
UIubLink
timeDelay
N/A
N/A
Transport Time Delay
UIubLink
timeDelayJitter
N/A
N/A
Transport Time Delay Jitter
UIubLink
hsSharUptPrd
N/A
N/A

Sharing Update Period
UIubLink
adjType
Power
Adjustment
Type
TS 25.433;
TS 25.423
Adjustment Type for DL

Power Balance
UIubLink
auditTimer
N/A
N/A
NodeB Resource Audit Timer
UIubLink
divContrlField
Diversity
Control Field
TS 25.433
Diversity Control Field
UIubLink
tWaitNBReach
N/A
N/A
Time Delay of Deleting Cell

When NodeB is Unreachable
UIubLink
tAtmRelLinkPro
N/A
N/A
ATM Link Broken Protection

Time Length
UIubLink
tIpRelLinkPro
N/A
N/A
IP Link Broken Protection

Time Length
UIubLink
ceShareMode
N/A
N/A
Share Mode of CE Resource

for Multi-Operators
UIubLink
ceShareSwitch
N/A
N/A
CE Share Switch for Carrier

Sharing
UIubLink
sptDpiSpiChgInd
N/A
N/A
NodeB support DPI-SPI

change indication
UIubLink
iubLinkNodeBFuncti
N/A
on
N/A
Associated NodeB
UIubLink
iubLinkUtranCell
N/A
N/A
Associated UtranCell List
UIubLink
Bandwidth
N/A
N/A
BandWidth of Iub Interface
ULogicalIubLink minCEPercent
N/A
N/A
Minimal percent of CE can

be used by the PLMN
ULogicalIubLink refUTbTypeProfile
N/A
N/A
Used Transport Bearer Type

Priority
refUDedSrvTbProfil
N/A
e
N/A
Used Dedicated Service

Transport Bearer Qos Profile
N/A
UTRAN Registration Area

Object ID
ULogicalIubLink
UUtranRegArea UUtranRegArea
N/A
UUtranRegArea ura
TS 25.423;
URA-ID; URA
TS 25.331;
ID; URA Identity
TS 25.401
URA Identity
UTrvMeasProfil
UTrvMeasProfile
e
N/A
N/A
Traffic Volume Measurement

Profile Object ID
UTrvMeasProfil
profileId
e
N/A
N/A
Profile Id
URachEvtUeTrv URachEvtUeTrv
N/A
N/A
UE Traffic Volume Event

Measurement Configuration
Object ID for RACH
URachEvtUeTrv measRptTrMod
Measurement
Report Transfer TS 25.331
Mode
Measurement Report
Transfer Mode
URachEvtUeTrv measQuantity
Measurement
quantity
Measurement Quantity
URachEvtUeTrv averageTime
Time Interval to
take an average TS 25.331
or a variance
Time Interval for Taking an

Average or a Variance
URachEvtUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
RLC Buffer Payload for Each

RB
URachEvtUeTrv rptRlcAveInd
Average of RLC
Buffer Payload TS 25.331
for each RB
Average of RLC Buffer

Payload for Each RB
URachEvtUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer

Payload for Each RB
URachEvtUeTrv measEvtNum
N/A
N/A
Event Number of UE Traffic

Volume Measurement
URachEvtUeTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
URachEvtUeTrv rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of

Event 4A/4B for RACH
Channel
TS 25.331
TS 25.331
URachEvtUeTrv trigTime
Time to trigger
TS 25.331
Time to Trigger
URachEvtUeTrv pendingTime
Pending time
after trigger
TS 25.331
Pending Time After Trigger
URachEvtUeTrv txInterCfgPre
N/A
N/A
Tx Interruption After Trigger

Configuration Tag
URachEvtUeTrv txInterruption
Tx interruption
after trigger
TS 25.331
Tx Interruption After Trigger
URachPrdUeTrv URachPrdUeTrv
N/A
N/A
UE Traffic Volume Period

Object ID for RACH
URachPrdUeTrv measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
URachPrdUeTrv measQuantity
Measurement
quantity
URachPrdUeTrv averageTime
Time Interval to
or a variance

URachPrdUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB

RB
URachPrdUeTrv rptRlcAveInd
Average of RLC
for each RB

Payload for Each RB
URachPrdUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
URachPrdUeTrv prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting
TS 25.331
TS 25.331
URachPrdUeTrv prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval
UFachEvUpTrv UFachEvUpTrv
N/A
N/A
UP Traffic Volume Event

Object ID for FACH
UFachEvUpTrv measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UFachEvUpTrv measQuantity
Measurement
quantity
UFachEvUpTrv averageTime
Time Interval to
or a variance

UFachEvUpTrv rptRlcBufInd
RLC Buffer
Payload for
each RB

RB
UFachEvUpTrv rptRlcAveInd
Average of RLC
for each RB

Payload for Each RB
UFachEvUpTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UFachEvUpTrv measEvtNum
N/A
N/A

Volume Measurement
UFachEvUpTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UFachEvUpTrv rptThres
Reporting
Threshold
TS 25.331

Event 4A/4B for FACH
Channel
UFachEvUpTrv trigTime
Time to trigger
TS 25.331
Time to Trigger
TS 25.331
TS 25.331
UFachEvUpTrv pendingTime
Pending time
after trigger
TS 25.331
UDchEvUeTrv
UDchEvUeTrv
N/A
N/A
UE Traffic Volume Event

Object ID for DCH
UDchEvUeTrv
measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UDchEvUeTrv
measQuantity
Measurement
quantity
UDchEvUeTrv
averageTime
Time Interval to
or a variance

UDchEvUeTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB

RB
UDchEvUeTrv
rptRlcAveInd
Average of RLC
for each RB

Payload for Each RB
UDchEvUeTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDchEvUeTrv
measEvtNum
N/A
N/A

Volume Measurement
UDchEvUeTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UDchEvUeTrv
rptThres0
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(8kbps)
UDchEvUeTrv
rptThres1
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(16kbps)
TS 25.331
TS 25.331
UDchEvUeTrv
rptThres2
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(32kbps)
UDchEvUeTrv
rptThres3
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(64kbps)
UDchEvUeTrv
rptThres4
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(128kbps)
UDchEvUeTrv
rptThres5
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(256kbps)
UDchEvUeTrv
rptThres6
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(384kbps)
UDchEvUeTrv
trigTime
Time to trigger
TS 25.331
Time to Trigger
UDchEvUeTrv
pendingTime
Pending time
after trigger
TS 25.331
UDchEvUpTrv
UDchEvUpTrv
N/A
N/A
UP Traffic Volume Event

Object ID for DCH
UDchEvUpTrv
measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UDchEvUpTrv
measQuantity
Measurement
quantity
UDchEvUpTrv
averageTime
Time Interval to
or a variance

UDchEvUpTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB

RB
TS 25.331
TS 25.331
rptRlcAveInd
Average of RLC
for each RB

Payload for Each RB
UDchEvUpTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDchEvUpTrv
measEvtNum
N/A
N/A

Volume Measurement
UDchEvUpTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UDchEvUpTrv
rptThres0
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(8kbps)
UDchEvUpTrv
rptThres1
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(16kbps)
UDchEvUpTrv
rptThres2
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(32kbps)
UDchEvUpTrv
rptThres3
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(64kbps)
UDchEvUpTrv
rptThres4
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(128kbps)
UDchEvUpTrv
rptThres5
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(256kbps)
UDchEvUpTrv
rptThres6
Reporting
Threshold
TS 25.331

Event 4A/4B for DCH
(384kbps)
UDchEvUpTrv
trigTime
Time to trigger
TS 25.331
Time to Trigger
UDchEvUpTrv
Pending time
after trigger
TS 25.331
UDchPrdUeTrv UDchPrdUeTrv
N/A
N/A
UE Traffic Volume Period

Object ID for DCH
UDchPrdUeTrv measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UDchPrdUeTrv measQuantity
Measurement
quantity
UDchPrdUeTrv averageTime
Time Interval to
or a variance

UDchPrdUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB

RB
UDchPrdUeTrv rptRlcAveInd
Average of RLC
for each RB

Payload for Each RB
UDchPrdUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDchPrdUeTrv prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting
UDchPrdUeTrv prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval
N/A
UP Traffic Volume
Number for Streaming Class
on HS-DSCH Object ID
UDchEvUpTrv
pendingTime
UDedSHsdschE UDedSHsdschEvU
N/A
vUpTrv
pTrv
UDedSHsdschE
measRptTrMod
vUpTrv
TS 25.331
TS 25.331
Measurement
Mode
Measurement Report
Transfer Mode
UDedSHsdschE
measQuantity
vUpTrv
Measurement
quantity
UDedSHsdschE
averageTime
vUpTrv
Time Interval to
or a variance

UDedSHsdschE
rptRlcBufInd
vUpTrv
RLC Buffer
Payload for
each RB

RB
UDedSHsdschE
rptRlcAveInd
vUpTrv
Average of RLC
for each RB

Payload for Each RB
UDedSHsdschE
rptRlcVarInd
vUpTrv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDedSHsdschE
measEvtNum
vUpTrv
N/A
N/A

Volume Measurement
UDedSHsdschE
meaEvtId
vUpTrv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UDedSHsdschE
rptThres
vUpTrv
Reporting
Threshold
TS 25.331

Event 4A/4B for Streaming
Class on HS-DSCH Channel
UDedSHsdschE
trigTime
vUpTrv
Time to trigger
TS 25.331
Time to Trigger
UDedSHsdschE
pendingTime
vUpTrv
Pending time
after trigger
TS 25.331
N/A
UP Traffic Volume
for Interactive and
Background Class on HSDSCH Object ID
UDedIBHsdsch UDedIBHsdschEvU
N/A
EvUpTrv
pTrv
UDedIBHsdsch
measRptTrMod
EvUpTrv
TS 25.331
TS 25.331
Measurement
Mode
Measurement Report
Transfer Mode
UDedIBHsdsch
measQuantity
EvUpTrv
Measurement
quantity
UDedIBHsdsch
averageTime
EvUpTrv
Time Interval to
or a variance

UDedIBHsdsch
rptRlcBufInd
EvUpTrv
RLC Buffer
Payload for
each RB

RB
UDedIBHsdsch
rptRlcAveInd
EvUpTrv
Average of RLC
for each RB

Payload for Each RB
UDedIBHsdsch
rptRlcVarInd
EvUpTrv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDedIBHsdsch
measEvtNum
EvUpTrv
N/A
N/A

Volume Measurement
UDedIBHsdsch
meaEvtId
EvUpTrv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
TS 25.331
TS 25.331

Event 4A/4B for Interactive
and Background Class on
HS-DSCH Channel
UDedIBHsdsch
rptThres
EvUpTrv
Reporting
Threshold
TS 25.331
UDedIBHsdsch
trigTime
EvUpTrv
Time to trigger
TS 25.331
Time to Trigger
UDedIBHsdsch
pendingTime
EvUpTrv
Pending time
after trigger
TS 25.331
N/A
UP Traffic Volume
for HS-DSCH in
CELL_FACH Object ID
UComHsdschE UComHsdschEvUp
N/A
vUpTrv
Trv
UComHsdschE
measRptTrMod
vUpTrv
Measurement
Mode
Measurement Report
Transfer Mode
UComHsdschE
measQuantity
vUpTrv
Measurement
quantity
UComHsdschE
averageTime
vUpTrv
Time Interval to
or a variance

UComHsdschE
rptRlcBufInd
vUpTrv
RLC Buffer
Payload for
each RB

RB
UComHsdschE
rptRlcAveInd
vUpTrv
Average of RLC
for each RB

Payload for Each RB
UComHsdschE
rptRlcVarInd
vUpTrv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UComHsdschE
measEvtNum
vUpTrv
N/A
N/A

Volume Measurement
UComHsdschE
meaEvtId
vUpTrv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UComHsdschE
rptThres
vUpTrv
Reporting
Threshold
TS 25.331

Event 4A/4B for HS-DSCH
Channel in CELL_FACH
UComHsdschE
trigTime
vUpTrv
Time to trigger
TS 25.331
Time to Trigger
UComHsdschE
pendingTime
vUpTrv
Pending time
after trigger
TS 25.331
N/A
UP Throughput Event
for E-TTI Switching Object ID
UETTIEdchEvU UETTIEdchEvUpTr
N/A
pTrv
v
UETTIEdchEvU
measRptTrMod
pTrv
TS 25.331
TS 25.331
Measurement
Mode
Measurement Report
Transfer Mode
UETTIEdchEvU
measQuantity
pTrv
Measurement
quantity
UETTIEdchEvU
averageTime
pTrv
Time Interval to
or a variance

UETTIEdchEvU
rptRlcBufInd
pTrv
RLC Buffer
Payload for
each RB

RB
UETTIEdchEvU
rptRlcAveInd
pTrv
Average of RLC
for each RB

Payload for Each RB
UETTIEdchEvU
rptRlcVarInd
pTrv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UETTIEdchEvU
measEvtNum
pTrv
N/A
N/A

Volume Measurement
UETTIEdchEvU
meaEvtId
pTrv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
TS 25.331
TS 25.331
UETTIEdchEvU
thoughThres
pTrv
N/A
N/A
Throughput Measurement
Threshold for E-TTI
Switching of Event 4A/4B for
E-DCH Channel
UETTIEdchEvU
trigTime
pTrv
Time to trigger
TS 25.331
Time to Trigger
UETTIEdchEvU
pendingTime
pTrv
Pending time
after trigger
TS 25.331
N/A
UP Traffic Volume
Object ID for E-DCH
UDedEdchEvUp
UDedEdchEvUpTrv N/A
Trv
UDedEdchEvUp
measRptTrMod
Trv
Measurement
Mode
Measurement Report
Transfer Mode
UDedEdchEvUp
measQuantity
Trv
Measurement
quantity
UDedEdchEvUp
averageTime
Trv
Time Interval to
or a variance

UDedEdchEvUp
rptRlcBufInd
Trv
RLC Buffer
Payload for
each RB

RB
UDedEdchEvUp
rptRlcAveInd
Trv
Average of RLC
for each RB

Payload for Each RB
UDedEdchEvUp
rptRlcVarInd
Trv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UDedEdchEvUp
measEvtNum
Trv
N/A
N/A

Volume Measurement
UDedEdchEvUp
meaEvtId
Trv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UDedEdchEvUp
rptThres
Trv
Reporting
Threshold
TS 25.331

Event 4A/4B for E-DCH
Channel
UDedEdchEvUp
trigTime
Trv
Time to trigger
TS 25.331
Time to Trigger
UDedEdchEvUp
pendingTime
Trv
Pending time
after trigger
TS 25.331
N/A
UP Traffic Volume
for E-DCH in CELL_FACH
Object ID
UComEdchEvU
UComEdchEvUpTrv N/A
pTrv
UComEdchEvU
measRptTrMod
pTrv
TS 25.331
TS 25.331
Measurement
Mode
Measurement Report
Transfer Mode
UComEdchEvU
measQuantity
pTrv
Measurement
quantity
UComEdchEvU
averageTime
pTrv
Time Interval to
or a variance

UComEdchEvU
rptRlcBufInd
pTrv
RLC Buffer
Payload for
each RB

RB
UComEdchEvU
rptRlcAveInd
pTrv
Average of RLC
for each RB

Payload for Each RB
UComEdchEvU
rptRlcVarInd
pTrv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UComEdchEvU
measEvtNum
pTrv
N/A
N/A

Volume Measurement
UComEdchEvU
meaEvtId
pTrv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UComEdchEvU
rptThres
pTrv
Reporting
Threshold
TS 25.331

Event 4A/4B for E-DCH
Channel in CELL_FACH
UComEdchEvU
trigTime
pTrv
Time to trigger
TS 25.331
Time to Trigger
UComEdchEvU
pendingTime
pTrv
Pending time
after trigger
TS 25.331
N/A
E-DCH Throughput
Object ID for HS-DSCH/EDCH to HS-DSCH/DCH
Switching
TS 25.331
TS 25.331
UEdchtoDchUp
UEdchtoDchUpTrv
Trv
N/A
UEdchtoDchUp
averageTime
Trv
Time Interval to
or a variance

UEdchtoDchUp
measEvtNum
Trv
N/A
N/A

Volume Measurement
UEdchtoDchUp
meaEvtId
Trv
Traffic volume
event identity
TS 25.331
UE Traffic Volume
UEdchtoDchUp
pendingTime
Trv
Pending time
after trigger
TS 25.331
UEdchtoDchUp
trigTime
Trv
Time to trigger
TS 25.331
Time to Trigger
UEdchtoDchUp
thoughThres
Trv
N/A
N/A
E-DCH Throughput
Measurement Threshold of
Event 4A/4B for HSDSCH/E-DCH to HSDSCH/DCH Switching
UEdchtoDchUp
measQuantity
Trv
Measurement
quantity
TS 25.331
UEdchtoDchUp
measRptTrMod
Trv
Measurement
Mode
Measurement Report
Transfer Mode
UEdchtoDchUp
rptRlcBufInd
Trv
RLC Buffer
Payload for
each RB

RB
UEdchtoDchUp
rptRlcAveInd
Trv
Average of RLC
for each RB

Payload for Each RB
UEdchtoDchUp
rptRlcVarInd
Trv
Variance of
RLC Buffer
Payload for
each RB
TS 25.331

Payload for Each RB
UIntraMeasProfi
UIntraMeasProfile
le
N/A
N/A
Intra-frequency
Measurement Profile Object
ID
UIntraMeasProfi
profileId
le
N/A
N/A
Profile Id
TS 25.331
UIntraMeasProfi intialHoCelSelScen
N/A
le
e
N/A
Initial Handover CelSel

Scene
UIntraMeasSrv
Spec
UIntraMeasSrvSpec N/A
N/A
Intra-frequency
Object ID
UIntraMeasSrv
Spec
srvCategory
N/A
N/A
Service and Bearer Type

Used for Differentiating
Handover Configuration
UIntraEcNoEvM
UIntraEcNoEvMeas N/A
eas
N/A
UEIntra-frequency Event
for CPICH Ec/No Object ID
UIntraEcNoEvM
filterCoeff
eas
Filter coefficient TS 25.331
Filter Coefficient
UIntraEcNoEvM
measEvtNum
eas
N/A
Event Number of Intrafrequency Measurement
UIntraEcNoEvM
meaEvtId
eas
Intra-frequency
TS 25.331
event identity
Intra-frequency Event
Identity
UIntraEcNoEvM
rptRange
eas
Reporting
TS 25.331
Range Constant
Reporting Range Constant

for Event 1A/1B
UIntraEcNoEvM
w
eas
TS 25.331
Weight for Event 1A/1B
UIntraEcNoEvM
hysteresis
eas
Hysteresis
TS 25.331
Hysteresis
UIntraEcNoEvM
threshUsedFreq
eas
Threshold used
TS 25.331
frequency
Threshold of the Quality of

the Used Frequency for
Event 1E/1F
UIntraEcNoEvM
rptDeactThr
eas
Reporting
deactivation
threshold
Reporting Deactivation
Threshold for Event 1A
N/A
TS 25.331
UIntraEcNoEvM
rplcActThr
eas
Replacement
activation
threshold
TS 25.331
Replacement Activation
Threshold for Event 1C and
1J
UIntraEcNoEvM
trigTime
eas
Time to trigger
TS 25.331
Time to Trigger
UIntraEcNoEvM
evtRptAmount
eas
Amount of
reporting
TS 25.331
Amount of Reporting for

Event 1A/1B/1C/1J
UIntraEcNoEvM
evtRptInterval
eas
Reporting
interval
TS 25.331
Reporting Interval for Event

1A/1B/1C/1J
N/A
UEIntra-frequency Event
for CPICH RSCP Object ID
UIntraRscpEvM
UIntraRscpEvMeas N/A
eas
UIntraRscpEvM
filterCoeff
eas
Filter Coefficient
UIntraRscpEvM
measEvtNum
eas
N/A
Event Number of Intrafrequency Measurement
UIntraRscpEvM
meaEvtId
eas
Intra-frequency
TS 25.331
event identity
Intra-frequency Event
Identity
UIntraRscpEvM
rptRange
eas
Reporting
TS 25.331
Range Constant

for Event 1A/1B
UIntraRscpEvM
w
eas
TS 25.331
UIntraRscpEvM
hysteresis
eas
Hysteresis
TS 25.331
Hysteresis
UIntraRscpEvM
threshUsedFreq
eas
Threshold used
TS 25.331
frequency
N/A
Threshold of the Quality of

the Used Frequency for
Event 1E/1F
UIntraRscpEvM
rptDeactThr
eas
Reporting
deactivation
threshold
TS 25.331
UIntraRscpEvM
rplcActThr
eas
Replacement
activation
threshold
TS 25.331
Replacement Activation
Threshold for Event 1C and
1J
UIntraRscpEvM
trigTime
eas
Time to trigger
TS 25.331
Time to Trigger
UIntraRscpEvM
evtRptAmount
eas
Amount of
reporting
TS 25.331

Event 1A/1B/1C/1J
UIntraRscpEvM
evtRptInterval
eas
Reporting
interval
TS 25.331

1A/1B/1C/1J
UIntraMeasNoS UIntraMeasNoSrvS
N/A
rvSpec
pec
N/A
Intra-frequency
Object ID
UIntraEcNoPrd
Meas
UIntraEcNoPrdMea
N/A
s
N/A
UEIntra-frequency Period
for CPICH Ec/No Object ID
UIntraEcNoPrd
Meas
filterCoeff
Filter Coefficient
UIntraEcNoPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
UIntraEcNoPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period

Report Criteria
UIntraRscpPrd
Meas
UIntraRscpPrdMea
N/A
s
N/A
UEIntra-frequency Period
for CPICH RSCP Object ID
UIntraRscpPrd
Meas
filterCoeff
Filter Coefficient
UIntraRscpPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
UIntraRscpPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331

Report Criteria
N/A
Detected SetMeasurement
Ec/No Object ID
UIntraEcNoEvM UIntraEcNoEvMeas
N/A
easForD
ForD
UIntraEcNoEvM
filterCoeff
easForD
Filter Coefficient
UIntraEcNoEvM
rptRange
easForD
Reporting
TS 25.331
Range Constant

for Event 1A/1B
UIntraEcNoEvM
w
easForD
TS 25.331
UIntraEcNoEvM
hysteresis
easForD
Hysteresis
TS 25.331
Hysteresis
UIntraEcNoEvM
rptDeactThr
easForD
Reporting
deactivation
threshold
TS 25.331
UIntraEcNoEvM
trigTime
easForD
Time to trigger
TS 25.331
Time to Trigger
UIntraEcNoEvM
evtRptAmount
easForD
Amount of
reporting
TS 25.331

Event 1A/1B/1C/1J
UIntraEcNoEvM
evtRptInterval
easForD
Reporting
interval
TS 25.331

1A/1B/1C/1J
N/A

RSCP Object ID
UIntraRscpEvM UIntraRscpEvMeas
N/A
easForD
ForD
UIntraRscpEvM
filterCoeff
easForD
Filter Coefficient
UIntraRscpEvM
rptRange
easForD
Reporting
TS 25.331
Range Constant

for Event 1A/1B
UIntraRscpEvM
w
easForD
TS 25.331
UIntraRscpEvM
hysteresis
easForD
Hysteresis
TS 25.331
Hysteresis
UIntraRscpEvM
rptDeactThr
easForD
Reporting
deactivation
threshold
TS 25.331
UIntraRscpEvM
trigTime
easForD
Time to trigger
TS 25.331
Time to Trigger
UIntraRscpEvM
evtRptAmount
easForD
Amount of
reporting
TS 25.331

Event 1A/1B/1C/1J
UIntraRscpEvM
evtRptInterval
easForD
Reporting
interval
TS 25.331

1A/1B/1C/1J
UInterMeasProfi
UInterMeasProfile
le
N/A
N/A
UE Inter-frequency
ID
UInterMeasProfi
profileId
le
N/A
N/A
Profile Id
UInterMeasProfi intialHoCelSelScen
N/A
le
e
N/A

Scene
N/A
Inter-frequency
Object ID
UInterMeaSrvS
UInterMeaSrvSpec N/A
pec
UInterMeaSrvS
srvCategory
pec
N/A
UInterEcNoEvM UInterEcNoEvMeas
N/A
easforU
forU
N/A

N/A
UE Inter-frequency Event
Object ID for CPICH Ec/No
(UTRAN)
UInterEcNoEvM
filterCoeff
easforU
Filter Coefficient
UInterEcNoEvM
measEvtNum
easforU
N/A
Event Number of Interfrequency Measurement
UInterEcNoEvM
meaEvtId
easforU
Inter-frequency
TS 25.331
event identity
Inter-frequency Event
Identity
UInterEcNoEvM
threshUsedFreq
easforU
Threshold used
TS 25.331
frequency
Absolute Threshold of the

Quality of the Currently Used
Frequency for 2B/2D/2F
UInterEcNoEvM
wUsed
easforU
W used
frequency
TS 25.331
Weight of the Currently Used

Frequency for 2A/2B/2D/2F
UInterEcNoEvM
hysteresis
easforU
Hysteresis
TS 25.331
Hysteresis
UInterEcNoEvM
trigTime
easforU
Time to trigger
TS 25.331
Time to Trigger
N/A
UInterEcNoEvM
Threshold non
threshNoUsedFreq
TS 25.331
easforU
used frequency

Quality of the Non-used
Frequency for 2B/2C/2E
UInterEcNoEvM
wNoUsed
easforU
TS 25.331
Weight of the Non-used

Frequency for 2A/2B/2C/2E
N/A
Object ID for CPICH RSCP
(UTRAN)
W non-used
frequency
UInterRscpEvM UInterRscpEvMeasf
N/A
easforU
orU
UInterRscpEvM
filterCoeff
easforU
Filter Coefficient
UInterRscpEvM
measEvtNum
easforU
N/A
UInterRscpEvM
meaEvtId
easforU
Inter-frequency
TS 25.331
event identity
Identity
UInterRscpEvM
threshUsedFreq
easforU
Threshold used
TS 25.331
frequency

UInterRscpEvM
wUsed
easforU
W used
frequency
TS 25.331

UInterRscpEvM
hysteresis
easforU
Hysteresis
TS 25.331
Hysteresis
UInterRscpEvM
trigTime
easforU
Time to trigger
TS 25.331
Time to Trigger
N/A
UInterRscpEvM
Threshold non
threshNoUsedFreq
TS 25.331
easforU
used frequency

Quality of the Non-used
Frequency for 2B/2C/2E
UInterRscpEvM
wNoUsed
easforU
TS 25.331
Weight of the Non-used

Frequency for 2A/2B/2C/2E
N/A
(GSM)
W non-used
frequency
N/A
easforG
forG
UInterEcNoEvM
filterCoeff
easforG
Filter Coefficient
UInterEcNoEvM
measEvtNum
easforG
N/A
N/A
UInterEcNoEvM
meaEvtId
easforG
Inter-frequency
TS 25.331
event identity
Identity
UInterEcNoEvM
threshUsedFreq
easforG
Threshold used
TS 25.331
frequency

UInterEcNoEvM
wUsed
easforG
W used
frequency
TS 25.331

UInterEcNoEvM
hysteresis
easforG
Hysteresis
TS 25.331
Hysteresis
UInterEcNoEvM
trigTime
easforG
Time to trigger
TS 25.331
Time to Trigger
N/A
(GSM)
N/A
easforG
orG
UInterRscpEvM
filterCoeff
easforG
Filter Coefficient
UInterRscpEvM
measEvtNum
easforG
N/A
UInterRscpEvM
meaEvtId
easforG
Inter-frequency
TS 25.331
event identity
Identity
UInterRscpEvM
threshUsedFreq
easforG
Threshold used
TS 25.331
frequency

UInterRscpEvM
wUsed
easforG
W used
frequency
TS 25.331

UInterRscpEvM
hysteresis
easforG
Hysteresis
TS 25.331
Hysteresis
N/A
UInterRscpEvM
trigTime
easforG
Time to trigger
N/A
easforE
forE
TS 25.331
Time to Trigger
N/A
(EUTRAN)
UInterEcNoEvM
filterCoeff
easforE
Filter Coefficient
UInterEcNoEvM
measEvtNum
easforE
N/A
UInterEcNoEvM
meaEvtId
easforE
Inter-frequency
TS 25.331
event identity
Identity
UInterEcNoEvM
threshUsedFreq
easforE
Threshold used
TS 25.331
frequency

UInterEcNoEvM
wUsed
easforE
W used
frequency
TS 25.331

UInterEcNoEvM
hysteresis
easforE
Hysteresis
TS 25.331
Hysteresis
UInterEcNoEvM
trigTime
easforE
Time to trigger
TS 25.331
Time to Trigger
N/A
(EUTRAN)
N/A
easforE
orE
N/A
UInterRscpEvM
filterCoeff
easforE
Filter Coefficient
UInterRscpEvM
measEvtNum
easforE
N/A
N/A
UInterRscpEvM
meaEvtId
easforE
Inter-frequency
TS 25.331
event identity
Identity
UInterRscpEvM
threshUsedFreq
easforE
Threshold used
TS 25.331
frequency

UInterRscpEvM
wUsed
easforE
W used
frequency
TS 25.331

UInterRscpEvM
hysteresis
easforE
Hysteresis
TS 25.331
Hysteresis
UInterRscpEvM
trigTime
easforE
Time to trigger
TS 25.331
Time to Trigger
UInterMeasNoS UInterMeasNoSrvS
N/A
rvSpec
pec
N/A
Inter-frequency
Object ID
UInterEcNoPrd
Meas
UInterEcNoPrdMea
N/A
s
N/A
UEInter-frequency Period
UInterEcNoPrd
Meas
filterCoeff
Filter Coefficient
UInterEcNoPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
UInterEcNoPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331

Report Criteria
UInterRscpPrd
Meas
UInterRscpPrdMea
N/A
s
N/A
UEInter-frequency Period
UInterRscpPrd
Meas
filterCoeff
Filter Coefficient
UInterRscpPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
UInterRscpPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331

Report Criteria
URatMeasProfil
URatMeasProfile
e
N/A
N/A
Inter-RAT Measurement
Profile Object ID
URatMeasProfil
profileId
e
N/A
N/A
Profile Id
URatMeasProfil intialHoCelSelScen
N/A
e
e
N/A

Scene
URatMeasSrvS
URatMeasSrvSpec N/A
pec
N/A
Configuration Related to
Traffic Category Object ID
URatMeasSrvS
srvCategory
pec
N/A

N/A
UE Inter-RAT Event
(GSM)
N/A
URatEcNoEvMe URatEcNoEvMeasf
N/A
asforG
orG
URatEcNoEvMe
filterCoeff
asforG
UTRAN Filter Coefficient
URatEcNoEvMe
gsmFilterCoeff
asforG
GSM Filter Coefficient
URatEcNoEvMe
eventNum
asforG
N/A
Event Number
URatEcNoEvMe
eventId
asforG
Inter-RAT event
TS 25.331
identity
N/A
Inter-RAT Event Identity
URatEcNoEvMe
thresh
asforG
Threshold own
system
TS 25.331

Quality of UTRAN Cell for 3A
URatEcNoEvMe
w
asforG
N/A
N/A
Weight of the UTRAN

System for 3A
URatEcNoEvMe
threshSys
asforG
Threshold other
TS 25.331
system

Quality of Other RAT for
3A/3B/3C
URatEcNoEvMe
hysteresis
asforG
Hysteresis
TS 25.331
Hysteresis
URatEcNoEvMe
trigTime
asforG
Time to trigger
TS 25.331
Time to Trigger
N/A
UE Inter-RAT Event
(GSM)
URatRscpEvMe URatRscpEvMeasf
N/A
asforG
orG
URatRscpEvMe
filterCoeff
asforG
URatRscpEvMe
gsmFilterCoeff
asforG
URatRscpEvMe
eventNum
asforG
N/A
Event Number
URatRscpEvMe
eventId
asforG
Inter-RAT event
TS 25.331
identity
URatRscpEvMe
thresh
asforG
Threshold own
system
TS 25.331

URatRscpEvMe
w
asforG
N/A
N/A
Weight of the UTRAN

System for 3A
N/A
URatRscpEvMe
threshSys
asforG
Threshold other
TS 25.331
system

3A/3B/3C
URatRscpEvMe
hysteresis
asforG
Hysteresis
TS 25.331
Hysteresis
URatRscpEvMe
trigTime
asforG
Time to trigger
TS 25.331
Time to Trigger
N/A
UE Inter-RAT Event
(EUTRAN)
URatEcNoEvMe URatEcNoEvMeasf
N/A
asforE
orE
URatEcNoEvMe
filterCoeff
asforE
URatEcNoEvMe
eUtranFilterCoeff
asforE
EUtran Filter Coefficient
URatEcNoEvMe
eventNum
asforE
N/A
Event Number
URatEcNoEvMe
eventId
asforE
Inter-RAT event
TS 25.331
identity
URatEcNoEvMe
thresh
asforE
Threshold own
system
TS 25.331

URatEcNoEvMe
w
asforE
N/A
N/A
Weight of the UTRAN

System for 3A
URatEcNoEvMe
threshSys
asforE
Threshold other
TS 25.331
system

3A/3B/3C
URatEcNoEvMe
hysteresis
asforE
Hysteresis
Hysteresis
N/A
TS 25.331
URatEcNoEvMe
trigTime
asforE
Time to trigger
URatRscpEvMe URatRscpEvMeasf
N/A
asforE
orE
TS 25.331
Time to Trigger
N/A
UE Inter-RAT Event
(EUTRAN)
URatRscpEvMe
filterCoeff
asforE
URatRscpEvMe
eUtranFilterCoeff
asforE
URatRscpEvMe
eventNum
asforE
N/A
Event Number
URatRscpEvMe
eventId
asforE
Inter-RAT event
TS 25.331
identity
URatRscpEvMe
thresh
asforE
Threshold own
system
TS 25.331

URatRscpEvMe
w
asforE
N/A
N/A
Weight of the UTRAN

System for 3A
URatRscpEvMe
threshSys
asforE
Threshold other
TS 25.331
system

3A/3B/3C
URatRscpEvMe
hysteresis
asforE
Hysteresis
TS 25.331
Hysteresis
URatRscpEvMe
trigTime
asforE
Time to trigger
TS 25.331
Time to Trigger
N/A
Configuration Unrelated to
Traffic Category Object ID
URatMeasNoSr URatMeasNoSrvSp
N/A
vSpec
ec
N/A
URatEcNoPrdM
URatEcNoPrdMeas N/A
eas
N/A
UEInter-RAT Period
URatEcNoPrdM
filterCoeff
eas
URatEcNoPrdM
gsmFilterCoeff
eas
URatEcNoPrdM
eUtranFilterCoeff
eas
URatEcNoPrdM
prdRptAmount
eas
Amount of
reporting
TS 25.331
URatEcNoPrdM
prdRptInterval
eas
Reporting
interval
TS 25.331

Report Criteria
N/A
UEInter-RAT Period
URatRscpPrdM
URatRscpPrdMeas N/A
eas
URatRscpPrdM
filterCoeff
eas
URatRscpPrdM
gsmFilterCoeff
eas
URatRscpPrdM
eUtranFilterCoeff
eas
URatRscpPrdM
prdRptAmount
eas
Amount of
reporting
TS 25.331
URatRscpPrdM
prdRptInterval
eas
Reporting
interval
TS 25.331

Report Criteria
UNbComMeasP UNbComMeasProfil
N/A
rofile
e
N/A
NodeB Common
ID
UNbComMeasP
profileId
rofile
N/A
N/A
Profile Id
UNbComMeasP
intialloadscene
rofile
N/A
N/A
Initial Load Scene
UNbComMeas
UNbComMeas
N/A
N/A
NodeB Common
Object ID
UNbComMeas
nbCMCfgNote
N/A
N/A
Function of Configuration
Parameters
UNbComMeas
measObjType
CHOICE
Common
Measurement
Object Type
TS 25.433
Common Measurement
Object Type
UNbComMeas
comMeasType
Common
Measurement
Type
TS 25.433
Common Measurement Type
UNbComMeas
measFilterCoeff
Measurement
TS 25.433
Filter Coefficient
Measurement Filter
Coefficient
UNbComMeas
rptType
Report
Characteristics
Report Characteristics
UNbComMeas
rptPrdUnit
CHOICE Report
Periodicity
TS 25.433
Scale
Choice Report Periodicity

Scale
UNbComMeas
rptPrd
Report
Periodicity
Value
TS 25.433
Report Period
UNbComMeas
onModChangTime
TUTRAN-GPS
Change Limit
TS 25.433
TUTRAN-GPS Change Limit
TS 25.433
UNbComMeas
onModDeviTime
Predicted
TUTRAN-GPS
Deviation Limit
UNbComMeas
gpsMeasAccClass
TUTRAN-GPS
TS 25.433
Accuracy Class
TS 25.433
Predicted TUTRAN-GPS
Deviation Limit
TUTRAN-GPS Measurement
Accuracy Class
UNbDedMeasPr UNbDedMeasProfil
N/A
ofile
e
N/A
NodeB Dedicated
ID
UNbDedMeasPr
profileId
ofile
N/A
N/A
Profile Id
UNbDedMeas
UNbDedMeas
N/A
N/A
NodeB Dedicated
Object ID
UNbDedMeas
nbDMCfgNote
N/A
N/A
Function of configuration
Parameters
UNbDedMeas
dedMeasType
Dedicated
Measurement
Type
TS 25.433
Dedicated Measurement
Type
UNbDedMeas
measFilterCoeff
Measurement
TS 25.433
Filter Coefficient
Measurement Filter
Coefficient
UNbDedMeas
rptType
Report
Characteristics
TS 25.433
Report Characteristics
UNbDedMeas
evtEfSirEThrd1
Measurement
Threshold 1
TS 25.433
Measurement Threshold 1 of
Event E/F for SIR Error
UNbDedMeas
dlRateLevel
N/A
N/A
Downlink Rate Level

Threshold used for D-TCP
Measurement in DASF-PS
UNbDedMeas
evtAbTcpThrd
Measurement
Threshold;
TS 25.433
Measurement Threshold of
Event A/B for Transmitted
Code Power
evtEfSirEThrd2
Measurement
Threshold 2
TS 25.433
Measurement Threshold 2 of
Event E/F for SIR Error
UNbDedMeas
evtAbcdefTime
Measurement
Hysteresis
Time;
Measurement
Change Time
TS 25.433
Measurement Change
Time/Measurement
HysteresisTime
UNbDedMeas
rptPrdUnit
CHOICE Report
Periodicity
TS 25.433
Scale
Choice Report Periodicity

Scale
UNbDedMeas
rptPrd
Report
Periodicity
Value
TS 25.433
Report Periodicity Value
UExternalENBF UExternalENBFunct
N/A
unction
ion
N/A

Object ID
UExternalENBF
eNodeBId
unction
N/A
N/A
ENodeB ID
UExternalENBF
eNodeBType
unction
N/A
N/A
ENodeB Type
UExternalENBF
rncid
unction
N/A
N/A
RncID
UExternalEUtra UExternalEUtranCe
N/A
nCellFDD
llFDD
N/A

Object ID
UExternalEUtra
pci
nCellFDD
N/A
N/A
Physical EUTRAN Cell

Identity
UExternalEUtra
plmnNum
nCellFDD
N/A
N/A
PLMN Number
UExternalEUtra
mcc
nCellFDD
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UNbDedMeas
UExternalEUtra
mnc
nCellFDD
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalEUtra
mncLength
nCellFDD
N/A
N/A
MNC BCD Code Length
UExternalEUtra
cellIdentity
nCellFDD
N/A
N/A
EUTRAN Cell Identity
Frequency
Band Indicator;
UExternalEUtra
Frequency band
eutranFreqBandInd
N/A
nCellFDD
indicator;
Frequency band
indicator 2
Eutran Frequency Band

Indicator
UExternalEUtra
earfcnDl
nCellFDD
N/A
N/A
Downlink EUTRAN Absolute

Radio Frequency Channel
Number
UExternalEUtra
earfcnUl
nCellFDD
N/A
N/A
Uplink EUTRAN Absolute

Number
UExternalEUtra
tac
nCellFDD
N/A
N/A
Tracking Area Code
UExternalEUtra
eUtranMeasBand
nCellFDD
N/A
N/A
EUTRAN Measurement
Bandwidth
UExternalEUtra
lac
nCellFDD
N/A
N/A
Location Area Code
UExternalEUtra
rac
nCellFDD
N/A
N/A
Routing Area Code
UExternalEUtra
eutranDlLdThrd
nCellFDD
N/A
N/A
Eutran Downlink Load

Threshold
UExternalEUtra
eutranUlLdThrd
nCellFDD
N/A
N/A
Eutran Uplink Load

Threshold
UExternalEUtra UExternalEUtranCe
N/A
nCellTDD
llTDD
N/A

Object ID
UExternalEUtra
pci
nCellTDD
N/A
N/A

Identity
UExternalEUtra
plmnNum
nCellTDD
N/A
N/A
PLMN Number
UExternalEUtra
mcc
nCellTDD
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalEUtra
mnc
nCellTDD
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalEUtra
mncLength
nCellTDD
N/A
N/A
MNC BCD Code Length
UExternalEUtra
cellIdentity
nCellTDD
N/A
N/A
EUTRAN Cell Identity
Frequency
Band Indicator;
UExternalEUtra
Frequency band
eutranFreqBandInd
N/A
nCellTDD
indicator;
Frequency band
indicator 2

Indicator
UExternalEUtra
earfcn
nCellTDD
N/A
N/A
EUTRAN Absolute Radio

Frequency Channel Number
UExternalEUtra
tac
nCellTDD
N/A
N/A
Tracking Area Code
UExternalEUtra
eUtranMeasBand
nCellTDD
N/A
N/A
EUTRAN Measurement
Bandwidth
UExternalEUtra
lac
nCellTDD
N/A
N/A
Location Area Code
UExternalEUtra
rac
nCellTDD
N/A
N/A
Routing Area Code
UExternalEUtra
eutranDlLdThrd
nCellTDD
N/A
N/A
Eutran Downlink Load

Threshold
UExternalEUtra
eutranUlLdThrd
nCellTDD
N/A
N/A
Eutran Uplink Load

Threshold
UExternalRncF UExternalRncFuncti
N/A
unction
on
N/A
External RNC Function

Object ID
UExternalRncF
mcc
unction
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalRncF
mnc
unction
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalRncF
rncId
unction
N/A
N/A
Adjacent RNC Identity
UExternalRncF
sharingMCC
unction
N/A
N/A
Sharing Mobile Country

Code
UExternalRncF
sharingMNC
unction
N/A
N/A
Sharing Mobile Network

Code
UExternalRncF
refUIurLink
unction
N/A
N/A
Used Iur Link
UExternalRncF
divCtrlInd
unction
Diversity
Control Field
TS 25.423
SRNC Diversity Combination

Indicator
UExternalRncF
dIurCmbInd
unction
N/A
N/A
DRNC Diversity Combination

Indicator
UExternalUtran UExternalUtranCell
N/A
CellFDD
FDD
N/A
External UTRAN Cell Object

ID
UExternalUtran
cId
CellFDD
C-Id; Cell
Identifier
TS 25.423;
TS 25.331;
TS 25.401
Cell Identity
UExternalUtran
mcc
CellFDD
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalUtran
mnc
CellFDD
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalUtran
rncId
CellFDD
RNC-ID; RNC
Identifier
TS 25.423;
TS 25.413;
TS 23.003
RNC Identity
UExternalUtran
cellMode
CellFDD
N/A
N/A
Cell Mode
UExternalUtran
lac
CellFDD
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
UExternalUtran
rac
CellFDD
RAC; Routing
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
UExternalUtran
hcsPrio
CellFDD
HCS_PRIO;
HCS Prio
TS 25.331;
TS 25.423;
TS 25.304
HCS_PRIO
Maximum
UExternalUtran maximumAllowedUl
Allowed UL Tx
CellFDD
TxPower
Power
TS 25.423;
TS 25.331
RACH Maximum Allowed UL

TX Power
UExternalUtran
qrxlevMin
CellFDD
Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB11
UExternalUtran
deltaQrxlevmin
CellFDD
DeltaQrxlevmin TS 25.304
DeltaQrxlevmin in SIB11
UExternalUtran
freqBandInd
CellFDD
UExternalUtran
uarfcnUl
CellFDD
UExternalUtran
uarfcnDl
CellFDD
UExternalUtran primaryScrambling
CellFDD
Code
Frequency
Band Indicator;
Frequency band
indicator;
UARFCN
Frequencyuplink
band
(Nu);
UL 2
indicator
UARFCN;
UARFCN;
UTRA Absolute
Radio
UARFCN
Frequency
downlink (Nd);
Channel
DL UARFCN;
Number
UARFCN;
UTRA Absolute
Radio
Frequency
Channel
Number
Primary
Scrambling
Code
TS 25.423;
TS 25.331
Frequency Band Indicator
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UUARFCN
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
DUARFCN
TS 25.331;
TS 25.423;
TS 25.433
Cell Primary Scrambling

Code
Primary CPICH
TS 25.423;
UExternalUtran
Power; Primary
primaryCpichPower
TS 25.433;
CellFDD
CPICH Tx
TS 25.331
Power
Primary CPICH Power
UExternalUtran
qqualMin
CellFDD
TS 25.331;
TS 25.304
Qqualmin in SIB11
TS 25.423;
TS 25.331;
TS 25.433
TX Diversity Indicator
TS 25.423;
TS 25.433;
TS 25.331
STTD Support Indicator
TS 25.423;
TS 25.433;
TS 25.331
Closed Loop Mode 1

Support Indicator
Qqualmin
Tx Diversity
Indicator; TX
Diversity
UExternalUtran
txDiversityIndicator Indicator;
CellFDD
Transmit
Diversity
Indicator
STTD Support
UExternalUtran
Indicator; STTD
sttdSupportIndicator
CellFDD
Indicator; STTD
indicator
Closed Loop
Mode1 Support
UExternalUtran closedLoopMode1S Indicator;
CellFDD
uptInd
Diversity Mode;
TX Diversity
Mode
UExternalUtran
mncLength
CellFDD
N/A
N/A
MNC BCD Code Length
UExternalUtran
sharingMCC
CellFDD
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003

Code
UExternalUtran
sharingMNC
CellFDD
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003

Code
UExternalUtran
sharingMNCLength N/A
CellFDD
N/A
Sharing MNC BCD Code

Length
UExternalUtran
sac
CellFDD
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Service Area Code for CS

and PS Domain
UExternalUtran
refUUtranRegArea
CellFDD
TS 25.423;
URA-ID; URA
TS 25.331;
ID; URA Identity
TS 25.401
Used UTRAN Registration

Area
UExternalUtran
snacNum
CellFDD
maxnoofSNAs
TS 25.423

Number
UExternalUtran
snacList
CellFDD
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
UExternalUtran
hspaSptMeth
CellFDD
N/A
N/A
HSPA Support Method
UExternalUtran
fdpchSuptInd
CellFDD
Cell Capability
TS 25.423
Container FDD
F-DPCH Support Indicator
UExternalUtran
eFdpchSupInd
CellFDD
Cell Capability
TS 25.423
Container FDD
Neighboring Cell Enhanced

F-DPCH Support Indicator
UExternalUtran
mimoSuptInd
CellFDD
N/A
N/A
MIMO Support Indicator
UExternalUtran mimo64QamSuptIn
N/A
CellFDD
d
N/A
Mimo64Qam Support
Indicator
UExternalUtran
dl64QamSuptInd
CellFDD
N/A
N/A
64QAM DL Support Indicator
UExternalUtran
adjImpUL2SuptInd
CellFDD
N/A
N/A
Adjacent Cell Uplink

Enhanced Layer 2 Support
Indicator
UExternalUtran
flexMacdSuptInd
CellFDD
N/A
N/A
Flexible MAC-d PDU Size

Support Indicator
UExternalUtran
iurDcHsdsSuptInd
CellFDD
N/A
N/A

Indication
UExternalUtran
sndSvrCelID
CellFDD
N/A
N/A
Possible Secondary Serving

Cell ID
UExternalUtran
pcpichPwrPre
CellFDD
N/A
N/A
Primary CPICH Power

Configuration Tag
UExternalUtran
cellDescripType
CellFDD
Geographical
Area
TS 25.331;
TS 25.413
Cell Description Type
UExternalUtran
polygonPointNum
CellFDD
Polygon>Geographical
Coordinates
TS 25.413
Polygon Point Number
UExternalUtran
polyLatitudeSign
CellFDD
Geographical
Coordinates
>Latitude Sign
TS 25.413
Polygon Point Latitude Sign
UExternalUtran
polyLatitude
CellFDD
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Polygon Point

Latitude
UExternalUtran
polyLongitude
CellFDD
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Polygon Point

Longitude
UExternalUtran
latitudeSign
CellFDD
Geographical
Coordinates
>Latitude Sign
TS 25.413
Latitude Sign for Cell Center
UExternalUtran
latitude
CellFDD
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Latitude for Cell

Center
UExternalUtran
longitude
CellFDD
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Longitude for

Cell Center
UExternalUtran
altitude
CellFDD
Altitude
TS 25.413
Cell Altitude for Cell Center
UExternalUtran
altitudeDir
CellFDD
Direction of
Altitude
TS 25.413
Direction of Altitude for Cell

Center
UExternalUtran
altitudeAcc
CellFDD
Vertical
TS 25.413
Accuracy Code
Altitude Accuracy
UExternalUtran
uncertAltitude
CellFDD
N/A
N/A
Altitude AccuracyCode
UExternalUtran
confidence
CellFDD
Confidence
TS 25.413
Confidence
UExternalUtran
cellRadius
CellFDD
N/A
TS 25.413
Cell Radius
UExternalUtran
uncertCode
CellFDD
N/A
N/A
Horizontal AccuracyCode
UExternalUtran
anteType
CellFDD
N/A
N/A
Antenna Type
UExternalUtran
anteLatitudeSign
CellFDD
Geographical
Coordinates
>Latitude Sign
TS 25.413
Antenna Latitude Sign
UExternalUtran
anteLatitude
CellFDD
Geographical
Coordinates
>Latitude
TS 25.413
Degree of Antenna Latitude
UExternalUtran
anteLongitude
CellFDD
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Antenna
Longitude
UExternalUtran
anteAltitude
CellFDD
Altitude
TS 25.413
Antenna Altitude
UExternalUtran
anteAltitudeDir
CellFDD
Direction of
Altitude
TS 25.413
Direction of Antenna Altitude
UExternalUtran
offsetAngle
CellFDD
Offset angle
TS 25.413;
TS 25.453
Offset Angle
UExternalUtran
innerAngle
CellFDD
Inner Angle
TS 25.453
Inner Angle
UExternalUtran
adjCs64Switch
CellFDD
N/A
N/A
Switch of CS 64kbps
Establishment for External
UTRAN Cell
UExternalUtran
deltaQrxlevminPr
CellFDD
N/A
TS 25.304
Configuration Tag
UExternalUtran
utranGpsSptInd
CellFDD
N/A
N/A
Support Indicator
UExternalUtran hsdschSuptCgtDetI
N/A
CellFDD
nd
N/A
Support SRNC-NODEB HSDSCH Congestion Detection

Indicator
UExternalUtran
edchSuptCgtDetInd N/A
CellFDD
N/A
Support SRNC-NODEB EDCH Congestion Detection

Indicator
UExternalUtran
edchTti2SuptInd
CellFDD
Cell Capability
TS 25.423
Container FDD
2ms E-TTI Support Indicator
UExternalUtran
edchSfCap
CellFDD
Cell Capability
TS 25.423
Container FDD
E-DCH SF Capability
UExternalUtran
Cell Capability
edchHarqCombCap
TS 25.423
CellFDD
Container FDD
E-DCH HARQ Combining

Capability
UExternalUtran
maxDtxCyc
CellFDD
Max UE DTX Cycle
Max UE DTX
Cycle
TS 25.423
UExternalUtran
cpcDtxDrxSuptInd
CellFDD
UExternalUtran
cpcHslessSuptInd
CellFDD
Continuous
Packet
Connectivity
DTX-DRX
Support
Indicator
Continuous
Packet
Connectivity
HS-SCCH less
Support
Indicator
TS 25.423
CPC DTX-DRX Support

Indicator
TS 25.423
CPC HS-SCCH less Support

Indicator
UExternalUtran
qqualMinSib12
CellFDD
Qqualmin
TS 25.331;
TS 25.304
Qqualmin in SIB12
UExternalUtran
qrxlevMinSib12
CellFDD
Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB12
TS 25.304
Configuration Tag
UExternalUtran deltaQrxlevminSib1
TS 25.331;
DeltaQrxlevmin
CellFDD
2
TS 25.304
UExternalUtran
timeDelay
CellFDD
N/A
N/A
Transport Time Delay
UExternalUtran
timeDelayJitter
CellFDD
N/A
N/A
Transport Time Delay Jitter
UExternalUtran
nrtMaxDlRateDchD N/A
CellFDD
N/A
Maximum Bit Rate on DL

DCH for NRT PS RAB in
External UTRAN Cell
UExternalUtran
nrtMaxUlRateDchD N/A
CellFDD
N/A
Maximum Bit Rate on UL

External UTRAN Cell
UExternalUtran
rtMaxDlRateDchD
CellFDD
N/A
N/A

DCH for RT PS RAB in
External UTRAN Cell
UExternalUtran
rtMaxUlRateDchD
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran deltaQrxlevminSib1
N/A
CellFDD
2Pr
UExternalUtran
nrtMaxRateEdchD
CellFDD
N/A
N/A
Maximum Bit Rate on EDCH for NRT PS RAB in

External UTRAN Cell
UExternalUtran
rtMaxRateEdchD
CellFDD
N/A
N/A
Maximum Bit Rate on EDCH for RT PS RAB in

External UTRAN Cell
UExternalUtran
dCelDcMimoSupInd N/A
CellFDD
N/A
External UTRAN Cell Dual

Cell+MIMO Support Indicator
UExternalUtran
aResPara1
CellFDD
N/A
N/A
Reserved Parameter 1 for

External UTRAN Cell
UExternalUtran
aResPara2
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara3
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara4
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara5
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara6
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara7
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara8
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara9
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara10
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara11
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara12
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara13
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara14
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara15
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara16
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara17
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara18
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara19
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
aResPara20
CellFDD
N/A
N/A

External UTRAN Cell
UExternalUtran
ul16QamSuppInd
CellFDD
N/A
N/A
Sixteen QAM UL Support

Indicator
UExternalUtran
ePowBoostSuppInd N/A
CellFDD
N/A
E-DPCCH Power Boosting

Support Indicator
UExternalUtran
adjPreCodeResInd N/A
CellFDD
N/A
Cell MIMO Precoding Weight

Set Restriction Support
Indicator
UExternalUtran
gaRptType
CellFDD
Geographical
Area
TS 25.413
Geographical Area Report

Type
UExternalUtran
adjClassZoneInd
CellFDD
N/A
N/A
Classified Zone Indicator
UExternalUtran
iurDbHsdSuptInd
CellFDD
N/A
N/A
DB DC-HSDPA Support
Indicator on Iur
UExternalUtran
dbSndSvrCelNum
CellFDD
N/A
N/A
Number of DB Secondary
Serving Cell
UExternalUtran
dbSndSvrCelID
CellFDD
N/A
N/A
DB Secondary Serving Cell

ID
UExternalUtran
backupCId
CellFDD
N/A
N/A
The Redundant Backup Cell

ID of Adjacent Cell In This
RNC
UExternalUtran
hsdStat
CellFDD
N/A
N/A
HSDPA Function Status
UExternalUtran
nbrCodHspdsch
CellFDD
N/A
N/A
Number of SF=16 Used in

HS-PDSCH
UExternalUtran
nbrCodHsscch
CellFDD
N/A
N/A
Number of SF=128 Used in

HS-SCCH
N/A
Dpch sttd Indication of

DRNC cell when UE active
the MIMIO and use pcpich
and scpich as phase
reference
UExternalUtran
dpSttdPSMimoInd
CellFDD
N/A
UExternalUtran
iurDcHsuSuptInd
CellFDD
N/A
N/A
DC-HSUPA Support
Indicator on Iur
UExternalUtran
iurDcHsuTrModInd
CellFDD
N/A
N/A
Separate Iur Transport

Bearer Support Indicator
UExternalUtran
iurDcHsuMulInd
CellFDD
N/A
N/A
E-DCH UL Flow Multiplexing

Support Indicator
UExternalGsmC
UExternalGsmCell
ell
N/A
N/A
External GSM Cell Object ID
UExternalGsmC
cellIdentity
ell
TS 25.423;
CI; Cell Identity TS 25.413;
TS 23.003
Cell Identifier
UExternalGsmC
bcchFrequency
ell
BCCH ARFCN
BCCH ARFCN
UExternalGsmC
ncc
ell
Network Colour
TS 25.331
Code (NCC)
Network Colour Code
UExternalGsmC
bcc
ell
Base Station
Colour Code
(BCC)
TS 25.331
Base Station Colour Code
UExternalGsmC
lac
ell
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
UExternalGsmC
mcc
ell
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalGsmC
mnc
ell
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalGsmC
rac
ell
RAC; Routing
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
TS 25.331
UExternalGsmC
racc
ell
N/A
N/A
Routing Area Colour Code
UExternalGsmC
mncLength
ell
N/A
N/A
MNC BCD Code Length
UExternalGsmC
sharingMCC
ell
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003

Code
UExternalGsmC
sharingMNC
ell
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003

Code
UExternalGsmC
sharingMNCLength N/A
ell
N/A
Sharing MNC BCD Code

Length
UExternalGsmC
geranCellInd
ell
N/A
N/A
GERAN Cell Indicator
UExternalGsmC
bscId
ell
N/A
N/A
BSC Identifier
UExternalGsmC
snacNum
ell
N/A
N/A

Number
UExternalGsmC
snacList
ell
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
UExternalGsmC
bandIndicator
ell
Band indicator
TS 25.331
Band Indicator
maximum
UExternalGsmC maximumAllowedUl
allowed UL TX
ell
TxPower
power
TS 25.331
Maximum Allowed UL TX
Power
UExternalGsmC
hcsPrio
ell
TS 25.331;
TS 25.423;
TS 25.304
HCS_PRIO
HCS_PRIO;
HCS Prio
UExternalGsmC
qrxlevMin
ell
Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB11
UExternalGsmC
deltaQrxlevminPr
ell
N/A
TS 25.304
DeltaQrxlevmin in
SIB11Configuration Tag
UExternalGsmC
deltaQrxlevmin
ell
DeltaQrxlevmin
TS 25.331;
TS 25.304
DeltaQrxlevmin in Sib11
UExternalGsmC
qrxlevMinSib12
ell
Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB12
UExternalGsmC deltaQrxlevminSib1
N/A
ell
2Pr
TS 25.304
Configuration Tag
UExternalGsmC deltaQrxlevminSib1
Qrxlevmin
ell
2
TS 25.331;
TS 25.304
UExternalGsmC
cellIndivOffset
ell
Cell Individual
Offset
TS 25.331
Cell Individual Offset
UExternalGsmC
gsmDlLdThrd
ell
N/A
N/A
GSM Downlink Load

Threshold
UExternalGsmC
gsmUlLdThrd
ell
N/A
N/A
GSM Uplink Load Threshold
UExternalGsmC
gsmDlRtLdThrd
ell
N/A
N/A
GSM Downlink RT Load

Threshold
UExternalGsmC
gsmUlRtLdThrd
ell
N/A
N/A
GSM Uplink RT Load

Threshold
UExternalGsmC
indoorCellInd
ell
N/A
N/A
Indoor Cell Indicator
UUtranCellFDD UUtranCellFDD
N/A
N/A
UTRAN Cell Object ID
UUtranCellFDD cId
C-ID
TS 25.433
Cell Identity
UUtranCellFDD localCellId
Local Cell ID;

Local Cell
Identifier
TS 25.433;
TS 25.401
Local Cell Identity
Maximum
maximumTransmiss
Transmission
ionPower
Power
TS 25.433
Cell Maximum Transmission

Power
UUtranCellFDD
UUtranCellFDD pichPower
PICH Power
offset; PICH
Power
TS 25.331;
TS 25.433
PICH Power
UUtranCellFDD cellMode
N/A
N/A
Cell Mode
UUtranCellFDD refULocationArea
N/A
N/A
Used Location Area
UUtranCellFDD refURoutingArea
N/A
N/A
Used Routing Area
UUtranCellFDD refUServiceArea
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Used Service Area in CS+PS

Domain
TS 25.423;
TS 25.331
Frequency Band Indicator
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UUARFCN
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
DUARFCN
UUtranCellFDD freqBandInd
UUtranCellFDD uarfcnUl
UUtranCellFDD uarfcnDl
Frequency
Band Indicator;
Frequency band
indicator;
UARFCN
Frequencyuplink
band
(Nu);
UL 2
indicator
UARFCN;
UARFCN;
UTRA Absolute
Radio
UARFCN
Frequency
downlink (Nd);
Channel
DL UARFCN;
Number
UARFCN;
UTRA Absolute
Radio
Frequency
Channel
Number
UUtranCellFDD
primaryScrambling
Code
Primary
Scrambling
Code
TS 25.331;
TS 25.423;
TS 25.433
Primary CPICH
Tx Power;
TS 25.331;
UUtranCellFDD primaryCpichPower Primary CPICH TS 25.433;
power; Primary TS 25.423
CPICH Power
UUtranCellFDD primarySchPower
UUtranCellFDD
Primary SCH
Power
TS 25.433
secondarySchPowe Secondary SCH

TS 25.433
r
Power
Cell Primary Scrambling

Code
P-CPICH Power
Primary SCH Power
Secondary SCH Power
UUtranCellFDD bchPower
BCH Power
TS 25.433
BCH Power
UUtranCellFDD aichPower
AICH Power
offset; AICH
Power
TS 25.331;
TS 25.433
AICH Power
UUtranCellFDD qqualMin
Qqualmin
TS 25.331;
TS 25.304
Minimum Required Quality

Level in the Cell (Qqualmin)
UUtranCellFDD qrxlevMin
Qrxlevmin
TS 25.331;
TS 25.304
Minimum Required Received

Level in the Cell (Qrxlevmin)
UUtranCellFDD deltaQrxlevmin
DeltaQrxlevmin
TS 25.331;
TS 25.304
Increment to the Minimum

Required Received Level in
the Cell (DeltaQrxlevmin)
restrictionStateIndic Cell Reserved TS 25.331;

ator
for operator use TS 25.304
Cell Reserved for Operator

Use
UUtranCellFDD
STTD Support
Indicator; STTD
UUtranCellFDD sttdSupportIndicator
Indicator; STTD
indicator
Closed Loop
Mode1 Support
closedLoopMode1S Indicator;
UUtranCellFDD
uptInd
Diversity Mode;
TX Diversity
Mode
TS 25.423;
TS 25.433;
TS 25.331
STTD Support Indicator
TS 25.423;
TS 25.433;
TS 25.331
Closed Loop Mode 1

Support Indicator
UUtranCellFDD txDiversityIndicator
TS 25.331;
STTD indicator;
TS 25.433;
STTD Indicator
TS 25.211
Cell Downlink Common

Physical Channel Transmit
Diversity Indicator
UUtranCellFDD refUUtranRegArea
N/A
N/A
Used UTRAN Registration

Area
UUtranCellFDD cellIndividualOffset
Cell Individual
Offset
TS 25.331
UUtranCellFDD refUIubLink
N/A
N/A
Used Iub Link
UUtranCellFDD hcsPrio
HCS_PRIO;
HCS Prio
TS 25.331;
TS 25.423;
TS 25.304
HCS_PRIO
UUtranCellFDD pchPower
PCH Power
TS 25.433
PCH Power
UUtranCellFDD address
N/A
N/A
Address
Quality Threshold Level for

Applying Prioritised
Hierarchical Cell Reselection
(QHcs) When Measurement
Quantity is CPICH Ec/No
Quality Threshold Level for
Applying Prioritised
Hierarchical Cell Reselection
Quantity is CPICH RSCP
UUtranCellFDD qHcsEcNo
Qhcs
TS 25.331;
TS 25.304
UUtranCellFDD qHcsRSCP
Qhcs
TS 25.331;
TS 25.304
UUtranCellFDD deltaQrxlevminPre
N/A
TS 25.304
Increment to the Minimum

Required Received Level in
the Cell Configuration Tag
refUNbComMeasPr
N/A
ofile
N/A
Used NodeB Common

Measurement Profile
UUtranCellFDD refUTrvMeasProfile N/A
N/A
Used Traffic Volume

Measurement Profile
UUtranCellFDD
UUtranCellFDD
refUUeIntMeasProfi
N/A
le
N/A
Used UE Internal
Measurement Profile
UUtranCellFDD tCell
T Cell
TS 25.433
T_Cell
UUtranCellFDD cellScen
N/A
N/A
Pathloss Scenario
UUtranCellFDD refUServiceAreaBc N/A
N/A
Used Service Area in BC

Domain
UUtranCellFDD sectorId
N/A
N/A
Sector Id
UUtranCellFDD cellDescripType
Geographical
Area
TS 25.331;
TS 25.413
Cell Description Type
UUtranCellFDD polygonPointNum
Polygon
TS 25.413
Polygon Point Number
UUtranCellFDD polyLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413
Polygon Point Latitude Sign
UUtranCellFDD polyLatitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Polygon Point

Latitude
UUtranCellFDD polyLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Polygon Point

Longitude
UUtranCellFDD latitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413
Latitude Sign for Cell Center
UUtranCellFDD latitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Latitude for Cell

Center
UUtranCellFDD longitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Longitude for

Cell Center
UUtranCellFDD altitude
Altitude
TS 25.413
Cell Altitude for Cell Center
UUtranCellFDD altitudeDir
Direction of
Altitude
TS 25.413
Direction of Altitude for Cell

Center
UUtranCellFDD altitudeAcc
Vertical
TS 25.413
Accuracy Code
Altitude Accuracy
UUtranCellFDD uncertAltitude
N/A
N/A
Altitude Accuracy Code
UUtranCellFDD confidence
Confidence
TS 25.413
Confidence
UUtranCellFDD cellRadius
N/A
TS 25.413
Cell Radius
UUtranCellFDD uncertCode
N/A
N/A
Horizontal Accuracy Code
UUtranCellFDD gARptType
Geographical
Area
TS 25.413
Geographical Area Report

Type
UUtranCellFDD anteType
N/A
N/A
Antenna Type
UUtranCellFDD anteLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413
Antenna Latitude Sign
UUtranCellFDD anteLatitude
Geographical
Coordinates
>Latitude
TS 25.413
Degree of Antenna Latitude
UUtranCellFDD anteLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Antenna
Longitude
UUtranCellFDD anteAltitude
Altitude
TS 25.413
Antenna Altitude
UUtranCellFDD anteAltitudeDir
Direction of
Altitude
TS 25.413
Direction of Antenna Altitude
UUtranCellFDD offsetAngle
Offset angle
TS 25.413;
TS 25.453
Offset Angle
UUtranCellFDD innerAngle
Inner Angle
TS 25.453
Inner Angle
UUtranCellFDD hspaSptMeth
N/A
N/A
HSPA Support Method
UUtranCellFDD mbmsSuptInd
N/A
N/A
MBMS Support Indicator
UUtranCellFDD suptMulUsDetInd
N/A
N/A
Multi-User Detection Support

Indicator
UUtranCellFDD tutranGpsSptInd
N/A
N/A
Support Indicator
UUtranCellFDD csTrafPrefInd
N/A
N/A
Preferred Traffic Type (CS)
UUtranCellFDD r99PsTrafPrefInd
N/A
N/A
Preferred Traffic Type (R99

PS)
UUtranCellFDD hsTrafPrefInd
N/A
N/A
Preferred Traffic Type (HS

PS)
UUtranCellFDD useOfHCS
Use of HCS
TS 25.331
Use of HCS in Cell

Reselection
UUtranCellFDD ulPwrHoSwch
N/A
N/A
UE Tx Power Switch for

Handover
UUtranCellFDD ulBlerHoSwch
N/A
N/A
UL BLER Switch for

Handover
UUtranCellFDD dlPwrHoSwch
N/A
N/A
DL Tx Power Switch for

Handover
UUtranCellFDD sIB12Ind
SIB12 Indicator TS 25.331
SIB12 Indicator
UUtranCellFDD hsdStat
N/A
N/A
HSDPA Function Status
UUtranCellFDD hsuStat
N/A
N/A
HSUPA Function Status
UUtranCellFDD mbmsStat
N/A
N/A
MBMS Function Status
UUtranCellFDD
ref1UIntraMeasProfi
N/A
le
N/A
Used Intra-frequency
Measurement Profile
UUtranCellFDD
ref2UIntraMeasProfi
N/A
le
N/A
Used Intra-frequency
Measurement Profile (VIP)
UUtranCellFDD
refUInterMeasProfil
N/A
e
N/A
Used UE Inter-frequency
Measurement Profile
UUtranCellFDD refURatMeasProfile N/A
N/A
Used Inter-RAT
Measurement Profile
UUtranCellFDD cellType
N/A
N/A
Cell Type
UUtranCellFDD bgNoiScene
N/A
N/A
Background Noise Automatic

Adjustment Scene
The Number of Consecutive
In-Sync Indications NodeB
Received After which RL
Restore Procedure Shall be
Triggered (N_INSYNC_IND)
The Number of Consecutive
Out-of-Sync Indications
NodeB Received After which
the Timer T_RLFAILURE
Shall be Started
(N_OUTSYNC_IND)
Timer Length for Trigger
Radio Link Failure Procedure
After NodeB Receive
N_OUTSYNC_IND
Consecutive Out-of-Sync
Indication (T_RLFAILURE)
UUtranCellFDD numInSyncInd
N_INSYNC_IN
D
UUtranCellFDD numOutSyncInd
N_OUTSYNC_I
TS 25.433
ND
UUtranCellFDD tRlFailure
T_RLFAILURE
TS 25.433
UUtranCellFDD classZoneInd
N/A
TS 25.413
Classified Zone Indicator
UUtranCellFDD detSetHoSwch
N/A
N/A
Detected Set Handover

Switch
UUtranCellFDD interHoTactic
N/A
N/A
Inter-frequency Handover
Tactic
UUtranCellFDD ratHoTactic
N/A
N/A
Inter-RAT Handover Tactic
TS 25.433
UUtranCellFDD maxRateMD
N/A
N/A
Maximum Allowable Rate on

DCH to be Increased to
When UE is in Macro
Diversity
UUtranCellFDD nrtMaxDlRateDch
N/A
N/A

Serving Cell
UUtranCellFDD nrtMaxUlRateDch
N/A
N/A

Serving Cell
Measurement
quantity for
UUtranCellFDD nonIntraMeasQuan
TS 25.331
frequency
quality estimate
UTRAN Measurement
Quantity for Inter-frequency
and Inter-RAT
Measurements
UUtranCellFDD intraMeasQuan
Measurement
quantity
TS 25.331
UTRAN Measurement
Quantity for Intra-frequency
Measurements
UUtranCellFDD pagingSendTimes
N/A
N/A
Sending Times of Paging

Message
UUtranCellFDD refUSrvPcProfile
N/A
N/A
Used Power Control Profile

Related to Service
SIB4 Indicator
TS 25.331
SIB4 Indicator
SIB6 Indicator
TS 25.331
SIB6 Indicator
UUtranCellFDD pccpchInfSib6Pre
N/A
N/A
PCCPCH Information in
SIB6 Configuration Tag
UUtranCellFDD prachSib6Pre
N/A
N/A
Dynamic Persistence Level

Information of SIB6 PRACH
in SIB7 Configuration Tag
UUtranCellFDD sIB7Originator
N/A
N/A
SIB7 Originator
UUtranCellFDD ecNoQualThrd
N/A
N/A
Cpich Ec/N0 Threshold for

Blind Handover
UUtranCellFDD rscpQualThrd
N/A
N/A
Cpich RSCP Threshold for

Blind Handover
UUtranCellFDD dlTpcN
DL TPC Pattern
TS 25.433
01 Count
DL TPC Pattern 01 Count
UUtranCellFDD rubRsvdCellInd
N/A
N/A
Cells for Reserved RUB

Indicator
UUtranCellFDD celReturnLteSwch
N/A
N/A
Cell Switch of Fast Return to

EUTRAN
UUtranCellFDD maxRachTxPwr
Maximum
allowed UL TX
power
TS 25.331
Maximum Allowed UL TX
Power of RACH
UUtranCellFDD prachCfgScene
N/A
N/A
PRACH Configuration Scene
UUtranCellFDD dbHsdSuptInd
N/A
N/A
DB DC-HSDPA Support
Indicator
refUDpiAppSrvProfil
N/A
e
N/A
Used DPI Application

Service Scene Profile
UUtranCellFDD
UUtranCellFDD
csSsUeReestSwitc
N/A
h
N/A
UUtranCellFDD
csHoUeReestSwitc
N/A
h
N/A
UUtranCellFDD
csRsUeReestSwitc
N/A
h
N/A
UUtranCellFDD
csSsRnReestSwitc
N/A
h
N/A
csHoRnReestSwitc
UUtranCellFDD
N/A
h
csRsRnReestSwitc
UUtranCellFDD
N/A
h
Switch of CS Call Reestablishment Triggered by

Receiving the CELL
UPDATE Message from UE
when SRNC is in Stable
Status
Receiving the CELL
when SRNC is in Handover
Flow
Receiving the CELL
when SRNC is in RAB Setup
Flow
RAN Network when SRNC is
in Stable Status
N/A

RAN network when SRNC is
in Handover Flow
N/A

in RAB Setup Flow
UUtranCellFDD
csRcUeReestSwitc
N/A
h
N/A
UUtranCellFDD
psSsUeReestSwitc
N/A
h
N/A
UUtranCellFDD
psHoUeReestSwitc
N/A
h
N/A
UUtranCellFDD
psRsUeReestSwitc
N/A
h
N/A
UUtranCellFDD
psSsRnReestSwitc
N/A
h
N/A
psHoRnReestSwitc
UUtranCellFDD
N/A
h
N/A
psRsRnReestSwitc
UUtranCellFDD
N/A
h
N/A
psRcUeReestSwitc
N/A
h
N/A
UUtranCellFDD

Receiving the CELL
when SRNC is in
RB/Trch/Phych Reconfig
Switch
Flow of PS Call Reestablishment Triggered by
Receiving the CELL
when SRNC is in Stable
Status
Switch of PS Call Reestablishment Triggered by
Receiving the CELL
when SRNC is in Handover
Flow
Receiving the CELL
when SRNC is in RAB Setup
Flow
RAN Network when SRNC is
in Stable Status
in Handover Flow
in RAB Setup Flow
Receiving the CELL
when SRNC is in
RB/Trch/Phych Reconfig
Flow
UUtranCellFDD virtualLac
N/A
N/A
Virtual Location Area Code
UUtranCellFDD scenarioType
N/A
N/A
Scenario Type
UUtranCellFDD oCNSCodeNumber N/A
N/A
Number of the Codes with

SF =128 Ordered for OCNS
UUtranCellFDD oCNSCode
N/A
Code Node Number with SF

=128 for OCNS
N/A
UUtranCellFDD cs64Switch
N/A
N/A
Switch of CS 64kbps
Establishment
UUtranCellFDD mimoPilotMode
N/A
N/A
MIMO Pilot Mode
UUtranCellFDD fDpchSuptInd
N/A
N/A
Cell F-DPCH Support

Indicator
UUtranCellFDD efdpchSupInd
N/A
N/A
Cell Enhanced F-DPCH

Support Indicator
UUtranCellFDD supt64QamInd
N/A
N/A
Cell 64QAM Support

Indicator
UUtranCellFDD mimoSuptInd
N/A
N/A
Cell MIMO Support Indicator
UUtranCellFDD cpcSuptInd
N/A
N/A
Cell CPC Support Indicator
UUtranCellFDD tti2msSuptInd
N/A
N/A
Cell HSUPA 2ms TTI

Support Indicator
UUtranCellFDD vamSupInd
N/A
N/A
Cell VAM Support Indicator
UUtranCellFDD sttdMimoBindInd
N/A
N/A
STTD and MIMO Activation

Binding Indicator
UUtranCellFDD celMimo64QamInd N/A
N/A
Cell MIMO and DL64QAM

Combined Capability
Support Indicator
UUtranCellFDD dcHsdschSupptInd N/A
N/A

Indication
UUtranCellFDD rrcRdtSwch
N/A
N/A
Switch of RRC Redirection

Triggered by Radio
Resource Congestion
UUtranCellFDD priRedirectRat
N/A
TS 25.331
Prior Redirect RAT Indicator
UUtranCellFDD twait
Wait time
TS 25.331
Wait Time for RRC

Connection Reestablishment
UUtranCellFDD eFACHSpptInd
N/A
N/A
Downlink Enhanced
CELL_FACH Support
Indicator
UUtranCellFDD uLEFACHSupport
N/A
N/A
Uplink Enhanced
CELL_FACH Support
Indicator
UUtranCellFDD cellDcMimoSupInd
N/A
N/A
Cell Dual Cell+MIMO

Support Indicator
UUtranCellFDD radioCapacity
N/A
N/A
Radio Capacity of Cell
UUtranCellFDD loadScene
N/A
N/A
Cell Load Scene
UUtranCellFDD loadBalanceScene
N/A
N/A
Load Balance Scene
UUtranCellFDD sccpchCfgScene
N/A
N/A
Scene
UUtranCellFDD hoCelSelScene
N/A
N/A
Mobility Configuration Scene
UUtranCellFDD cellRadiusScene
N/A
N/A
Cell Radius Scene
N/A
Cell Available Subchannel

Number Continuity Setting
Indicator
UUtranCellFDD celAvaSubCha
N/A
UUtranCellFDD defSibSuptSwch
Deferred
measurement
TS 25.331
control UTRAN
support
Switch of Deferred
SIB11/11bis/12 Support
UUtranCellFDD freClosePri
N/A
N/A
Priority of Frequency Switch

Off
UUtranCellFDD refUBPriAcProfile
N/A
N/A
Used Access Control Profile

UUtranCellFDD
refUSchPriMapping
N/A
Profile
N/A
Used Scheduling Priority

Mapping Relationship Profile
UUtranCellFDD
ref1UAppPriMappin
N/A
gProfile
N/A
Used Application Priority

(Load Control)
UUtranCellFDD
ref2UAppPriMappin
N/A
gProfile
N/A
Used Application Priority

(Congestion Control)
UUtranCellFDD csNumThrd2
N/A
N/A
Non-VIP CS User Number

Threshold When VIP Exists
UUtranCellFDD psNumThrd2
N/A
N/A
Non-VIP PS User Number

Threshold When VIP Exists
UUtranCellFDD dcHsupaSupptInd
N/A
N/A
Dual Cell HSUPA Support

Indication
UUtranCellFDD eutranNCblstSwch
N/A
N/A
Switch of support the Eutran

Neighbouring cell blacklist
UUtranCellFDD refUMPOProfile
N/A
N/A
Used HS-PDSCH
Measurement Power Offset
profile
UUtranCellFDD hsdschTrafLimit
N/A
N/A
Maximum Number of Users

on HS-DSCH
UUtranCellFDD edchTrafLimit
N/A
N/A

on E-DCH
UCelInfoFDD
UCelInfoFDD
N/A
N/A
Cell Extended Info

UCelInfoFDD
startTimetoClsF
N/A
N/A
Start Time to Switch Off

Frequency Intelligently
UCelInfoFDD
endTimetoClsF
N/A
N/A
End Time to Switch Off

UCelInfoFDD
ueNumThreshCls
N/A
N/A
UE Number Threshold Used

for Switching Off Frequency
Intelligently
UCelInfoFDD
freClsOpnTrigTm
N/A
N/A
Trigger Time of Judgment

Switching ON/Off Frequency
Intelligently
UCelInfoFDD
openFreAlg
N/A
N/A
Switch of Algorithm Used to

Switch On the Frequency
Intelligently
UCelInfoFDD
closeFreAlg
N/A
N/A
Switch of Algorithm Used to

Switch Off the Frequency
Intelligently
UCelInfoFDD
forbTimAftOpnF
N/A
N/A
Forbidden Time of Switching

Off After Switching On the
Frequency
UCelInfoFDD
rtMaxDlRateDch
N/A
N/A

Serving Cell
UCelInfoFDD
rtMaxUlRateDch
N/A
N/A

Serving Cell
UCelInfoFDD
nrtMaxRateEdch
N/A
N/A
Maximum Bit Rate on EDCH for NRT PS RAB in

Serving Cell
UCelInfoFDD
rtMaxRateEdch
N/A
N/A
Maximum Bit Rate on EDCH for RT PS RAB in

Serving Cell
UCelInfoFDD
dlCtrlMBRSwitch
N/A
N/A
DL Controlled MBR Switch
UCelInfoFDD
dlControledMBR
N/A
N/A
DL Controlled MBR
UCelInfoFDD
ulCtrlMBRSwitch
N/A
N/A
UL Controlled MBR Switch
UCelInfoFDD
ulControledMBR
N/A
N/A
UL Controlled MBR
UCelInfoFDD
cellBarAcSwh
N/A
N/A
Switch of Cell Restriction
UCelInfoFDD
cellBarPollingSwh
N/A
N/A
Switch of Polling in Cell

Restriction
UCelInfoFDD
cellBarAcNum
N/A
N/A
Number of Cell Barred AC
UCelInfoFDD
barInterval
N/A
N/A
Time Interval of Barred AC
UCelInfoFDD
servHoSwch
N/A
N/A
Service Handover Switch
UCelInfoFDD
absPriReselSwch
N/A
N/A
Absolute Priority Reselection

Criteria Switch
UCelInfoFDD
ifOrRatHoSwch
N/A
N/A
Inter Frequency or Inter RAT

handover Switch
UCelInfoFDD
eFACHBandWidth
N/A
N/A
Transport Band Width for

Downlink Enhanced
CELL_FACH
UCelInfoFDD
drxOnFachInd
N/A
N/A
E-FACH DRX Support

Indication in Cell
UCelInfoFDD
choStraMulRatHo
N/A
N/A
Choice Strategy in Multi-RAT

Handover
UCelInfoFDD
addNRLSHOSwch
N/A
N/A
Adding New Radio Link

Judgement Switch
UCelInfoFDD
cResPara1
N/A
N/A
Cell Reserved Parameter 1
UCelInfoFDD
cResPara2
N/A
N/A
UCelInfoFDD
cResPara3
N/A
N/A
UCelInfoFDD
cResPara4
N/A
N/A
UCelInfoFDD
cResPara5
N/A
N/A
UCelInfoFDD
cResPara6
N/A
N/A
UCelInfoFDD
cResPara7
N/A
N/A
UCelInfoFDD
cResPara8
N/A
N/A
UCelInfoFDD
cResPara9
N/A
N/A
UCelInfoFDD
cResPara10
N/A
N/A
UCelInfoFDD
cResPara11
N/A
N/A
UCelInfoFDD
cResPara12
N/A
N/A
UCelInfoFDD
cResPara13
N/A
N/A
UCelInfoFDD
cResPara14
N/A
N/A
UCelInfoFDD
cResPara15
N/A
N/A
UCelInfoFDD
cResPara16
N/A
N/A
UCelInfoFDD
cResPara17
N/A
N/A
UCelInfoFDD
cResPara18
N/A
N/A
UCelInfoFDD
cResPara19
N/A
N/A
UCelInfoFDD
cResPara20
N/A
N/A
UCelInfoFDD
coverPrd
N/A
N/A
Shield Period for Increasing

SIR Target in Threshold
Algorithm
UCelInfoFDD
pOSetup
N/A
N/A
Power Offset for Downlink

DPCH Initial Power
Calculation when Call Setup
N/A

DPCH Initial Power
Calculation when Soft or
Softer Handover
N/A

DPCH Initial Power
Calculation when RAB Hard
Handover
N/A

DPCH Initial Power
Calculation when SRB Hard
Handover
N/A

DPCH Initial Power
Calculation when RAB ReEstablishment.
UCelInfoFDD
UCelInfoFDD
UCelInfoFDD
UCelInfoFDD
pOSoftHO
pORabHardHO
pOSrbHardHO
pOReEstablish
N/A
N/A
N/A
N/A
UCelInfoFDD
ulCacSwitch
N/A
N/A
Cell Uplink Admission

Control Switch
UCelInfoFDD
dlCacSwitch
N/A
N/A
Cell Downlink Admission

Control Switch
UCelInfoFDD
dlThrputSwitch
N/A
N/A
Cell HSDPA Throughput

Admission Control Switch
UCelInfoFDD
pathLoss
N/A
N/A
Nominal Pathloss
UCelInfoFDD
rrcSigUsrNumThr
N/A
N/A
Threshold of the Users

Number of the RRC
Signaling only in CELL_DCH
state Co-Existin the Cell
UCelInfoFDD
bckNoiseAdjSwh
N/A
N/A

Adjustment Switch
UCelInfoFDD
oriBckNoise
Reference
Received Total
Wide Band
Power
TS 25.433
Original Background Noise

Configuration
UCelInfoFDD
dLEFACHUserNum N/A
N/A

on Downlink Enhanced
CELL_FACH
UCelInfoFDD
sfFLayerReference N/A
N/A
Reference SF Layer Used

for Code Reservation in CAC
UCelInfoFDD
dpcchPcpLen
PC preamble;
PC Preamble
TS 25.331;
TS 25.423
DPCH PC Preamble Length
UCelInfoFDD
srbDelay
SRB delay;
SRB Delay
TS 25.331;
TS 25.423
SRB Delay
UCelInfoFDD
ul16QamSwi
N/A
N/A
Cell Uplink 16QAM Support

Indicator
UCelInfoFDD
amrDlLdThrd
N/A
N/A
Cell Downlink Load

Threshold for AMR Data
Rate Decision
UCelInfoFDD
amrUlLdThrd
N/A
N/A
Cell Uplink Load Threshold

for AMR Data Rate Decision
UCelInfoFDD
simCompUserNum N/A
N/A
User Number with

Compressed Mode
Activation for Balance
Strategy Based On
Measurement
UCelInfoFDD
pcpiPwrDnStep
N/A
P-CPICH Power Down Step

Size Used to Switch Off
N/A
Time Interval between two

Downgrade of P-CPICH
Power Used to Switch Off
UCelInfoFDD
pcpiPwrDnTmWin
N/A
N/A
UCelInfoFDD
pcpiPwrDnStepTm
N/A
N/A
Times of Downgrade of PCPICH Power with Equal

Step Used to Switch Off
UCelInfoFDD
cpichEcN0
N/A
N/A
Default CPICH Ec/No
UCelInfoFDD
cchFactor
N/A
N/A
Common Transfer
Bandwidth Discount Factor
for Channel
UCelInfoFDD
intraRptQSib3
Intra-frequency
reporting
TS 25.331
quantity SIB3
Intra-frequency reporting
quantity SIB3 when
SIB11/11bis/12 deferred
reading
UCelInfoFDD
fddInterFMeasInd
N/A
TS 25.331
UE Inter-frequency FDD
Measurement Indicator
UCelInfoFDD
interRatMIndPre
N/A
TS 25.331
UE Inter-System
Measurement Indicator
UCelInfoFDD
powerMarginClose
N/A
N/A
DL Power Margin for

Frequency Switch Off
Judgement
UCelInfoFDD
intMarginClose
N/A
N/A
UL Interference Margin for

Judgement
UCelInfoFDD
codeMarginClose
N/A
N/A
DL Code Margin for

Judgement
UCelInfoFDD
ulCeMarginClose
N/A
N/A
UL CE Margin for Frequency

Switch Off Judgement
UCelInfoFDD
dlCeMarginClose
N/A
N/A
DL CE Margin for Frequency

Switch Off Judgement
UCelInfoFDD
hsNumMarginClose N/A
N/A
HSDPA User Number Margin

for Frequency Switch Off
Judgement
UCelInfoFDD
eNumMarginClose
N/A
N/A
HSUPA User Number Margin

for Frequency Switch Off
Judgement
UCelInfoFDD
powerMarginOpen
N/A
N/A
DL Power Margin for

Frequency Switch On
Judgement
UCelInfoFDD
intMarginOpen
N/A
N/A
UL Interference Margin for

Frequency Switch On
Judgement
UCelInfoFDD
codeMarginOpen
N/A
N/A
DL Code Margin for

Frequency Switch On
Judgement
UCelInfoFDD
ulCeMarginOpen
N/A
N/A
UL CE Margin for Frequency

Switch On Judgement
UCelInfoFDD
dlCeMarginOpen
N/A
N/A
DL CE Margin for Frequency

Switch On Judgement
UCelInfoFDD
hsNumMarginOpen N/A
N/A
HSDPA User Number Margin

for Frequency Switch On
Judgement
UCelInfoFDD
eNumMarginOpen
N/A
N/A
HSUPA User Number Margin

for Frequency Switch On
Judgement
UCelInfoFDD
freCloseAllowedInd N/A
N/A
Indication of Whether the

Frequency Switch Off is
Allowed or Not
UCelInfoFDD
freClsCeEvaInd
N/A
N/A
Indication of CE Evaluation
for Switching Off Frequency
Intelligently
UCelInfoFDD
sAOffSuptInd
N/A
N/A
S-CPICH Deactivation
Support Indicator
UCelInfoFDD
sAOffThs
N/A
N/A
Threshold of MIMO User

Number to Deactivate the
Secondary Antenna
UCelInfoFDD
sAOnThs
N/A
N/A
Threshold of MIMO User

Number to Activate the
Secondary Antenna
UCelInfoFDD
sATrigTime
N/A
N/A
Trigger Time to Activate or

Deactivate the S-CPICH
UCelInfoFDD
nodeBSafeThr
N/A
N/A
Safe Threshold for NodeB
UCelInfoFDD
interNbrNumLimit
N/A
N/A
Filtering Limit of InterFrequency Neighboring Cell

Number
UCelInfoFDD
gsmNbrNumLimit
N/A
N/A
Filtering Limit of GSM

Neighboring Cell Number
UCelInfoFDD
csIntraEvtSwch
N/A
N/A
Event 1A/1C/1D of DRNC's

Cells for CS Service Strategy
Switch
UCelInfoFDD
r99PwrRatPlmnSwi N/A
N/A
Switch for Setting R99

Power Ratio for Different
PLMN
UCelInfoFDD
r99MaxPowerSwi
N/A
N/A
Switch for Limiting the

Maximum R99 Power when
HSDPA User Exist
UCelInfoFDD
maxR99DlPwrOffst N/A
N/A
Offset of the Threshold Stop

R99 Load Decreasing
Relative to the R99
Maximum Power when
HSDPA User Exist
UCelInfoFDD
plmnCodShaSwch
N/A
N/A
Switch of PLMN DPCH Code

Sharing
UCelInfoFDD
dpcchPoSecUlFre
DPCCH Power
offset for
secondary UL
frequency
TS 25.433
DPCCH Power Offset for

Secondary UL Frequency
UCelInfoFDD
rsrvdBitRate
N/A
N/A
Reserved Bit Rate for I&B

Scheduling E-DCH Traffic
UCelInfoFDD
btnOfUptSIBCmp
N/A
N/A
The Button of Upating SIB

completely
UCelInfoFDD
sibSchuOptSwit
N/A
N/A
Switch of SIB Scheduling

Optimization
UCelInfoFDD
periodTriggerTime
N/A
N/A
Time To Trigger for Interfrequency and Inter-Rat

Period Measurement
UCelInfoFDD
nbrCsNumThrd
N/A
N/A
Non-VIP CS User Number

Threshold for VIP
Neighboring Cells
UCelInfoFDD
nbrPsNumThrd
N/A
N/A
Non-VIP PS User Number

Threshold for VIP
Neighboring Cells
UCelInfoFDD
hsdpaNumLow
N/A
N/A
Low HSDPA User Number

Level Threshold
UCelInfoFDD
hsdpaNumHigh
N/A
N/A
High HSDPA User Number

Level Threshold
UCelInfoFDD
badCovEcN0
N/A
N/A
Bad Coverage P-CPICH

Ec/N0 Threshold
UCelInfoFDD
badCovRscp
N/A
N/A
Bad Coverage P-CPICH

RSCP Threshold
UCelInfoFDD
pchCellSwch
N/A
N/A
Cell Level PCH Switch
UCelInfoFDD
sib18Ind
N/A
N/A
SIB18 Indicator
UCelInfoFDD
badEdchCovSwch
N/A
N/A
Switch of the Uplink Channel

Allocation Strategy For Bad
Coverage
UCelInfoFDD
badEdchCovEcNo
N/A
N/A
P-CPICH Ec/No Threshold

for Bad E-DCH Coverage
UCelInfoFDD
badEdchCovRscp
N/A
N/A
P-CPICH RSCP Threshold

for Bad E-DCH Coverage
UCelInfoFDD
edchToDch6ASwch N/A
N/A
Switch of the HS-DSCH/EDCH to HS-DSCH/DCH

Channel Switching Triggered
by UE Transmitted Power
and Throughput
UCelInfoFDD
blerLoadSwitch
N/A
N/A
The Switch for Load based

BLER Function
UCelInfoFDD
defaultLoadLevel
N/A
N/A
Default Load Level
UCelInfoFDD
lowRotThreshold
N/A
N/A
Low RoT Level Threshold
UCelInfoFDD
highRotThreshold
N/A
N/A
High RoT Level Threshold
UCelInfoFDD
lowUserNumThr
N/A
N/A
Low User Number Level

Threshold
UCelInfoFDD
highUserNumThr
N/A
N/A
High User Number Level

Threshold
UCelInfoFDD
dlLowLoadThr
N/A
N/A
Downlink Low Load Level

Threshold
UCelInfoFDD
dlHighLoadThr
N/A
N/A
Downlink High Load Level

Threshold
UCelInfoFDD
tcpOptSwitch
N/A
N/A
Switch of TCP Optimization
UCelInfoFDD
mulSrvRePsHoLteS
N/A
w
N/A
Switch of PS Service Fast

Return to Eutran when CS is
released for Multi-RAB
Service
ULogicalCell
ULogicalCell
N/A
N/A
Logic Cell Configuration

Object ID
ULogicalCell
commonPlmnInd
N/A
N/A
Common PLMN Indicator
ULogicalCell
refUUtranCellFDD
N/A
N/A
Used UTRAN Cell
ULogicalCell
csACBarredOmcr
N/A
N/A
CS Domain Specific Access

Class N Barred Indicator
(N=0..15)
ULogicalCell
PsACBarredOmcr
N/A
N/A
PS Domain Specific Access

Class N Barred Indicator
(N=0..15)
ULogicalCell
accessPercent
N/A
N/A
Access Percent of the PLMN

for Non-Supporting UEs
ULogicalCell
csDsarSwh
N/A
N/A
Switch of CS Domain DSAR
ULogicalCell
pSDsarSwh
N/A
N/A
Switch of PS Domain DSAR
ULogicalCell
pagingLocaBarSwh N/A
N/A
Switch of Paging and

Location/Registration
Restriction
ULogicalCell
csDsarPollingSwh
N/A
N/A
Switch of Polling in CS
Domain DSAR
ULogicalCell
pSDsarPollingSwh
N/A
N/A
Switch of Polling in PS
Domain DSAR
ULogicalCell
cSBarAcNum
N/A
N/A
Number of Barred AC in CS
Domain
ULogicalCell
pSBarAcNum
N/A
N/A
Number of Barred AC in PS
Domain
ULogicalCell
r99PwrPercent
N/A
N/A
R99 Power Ratio when

Carrier Sharing
ULogicalCell
plmnCodShaRat
N/A
N/A
Dpch Code Ratio of PLMN

Code sharing
N/A
N/A
Neighbouring Cell Object ID
refUExternalUtranC
N/A
ellFDD
N/A
Used External UTRAN Cell
N/A
Used UTRAN Cell
UUtranRelation UUtranRelation
UUtranRelation
UUtranRelation refUUtranCellFDD
N/A
UUtranRelation shareCover
N/A
N/A
Share Cover Indication
UUtranRelation measPrio
N/A
N/A
Measurement Priority of
Neighboring Cell
UUtranRelation stateMode
N/A
N/A
UE State Indicator Used for

UTRAN Neighboring Cell
Configuration
UUtranRelation sb11orSib11bis
N/A
TS 25.331
Broadcast in either SIB11 or

SIB11bis
UUtranRelation useOfHCS
Use of HCS
TS 25.331
Use of HCS in Cell

Reselection
UUtranRelation penaltyTimeSib11
Penalty_time
TS 25.331;
TS 25.304
Penalty Time in SIB11
Temporary Offset When

Measurement Quantity is
CPICH RSCP
(Temporary_offset1)
Broadcasted in SIB11
Temporary Offset When
Measurement Quantity is
CPICH Ec/No
(Temporary_offset2)
UUtranRelation tempOffset1Sib11
Temporary_offs TS 25.331;
et1
TS 25.304
et2
TS 25.304
UUtranRelation cellIndivOffset
Cell Individual
Offset
TS 25.331
Qoffset1s, n
TS 25.331;
TS 25.304
Quality Offset 1 (Qoffset1s,

n) Between Serving Cell and
Neighbouring Cell
UUtranRelation qoffset2SNSib11
Qoffset2s, n
TS 25.331;
TS 25.304

Neighbouring Cell
UUtranRelation qhcsEcN0Sib11
Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH Ec/No in

SIB11
UUtranRelation qhcsRscpSib11
Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH RSCP in

SIB11
UUtranRelation qhcsEcN0Sib12
Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH Ec/No in

SIB12
UUtranRelation qhcsRscpSib12
Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH RSCP in

SIB12
Qoffset1s, n
TS 25.331;
TS 25.304

Neighbouring Cell
Qoffset2s, n
TS 25.331;
TS 25.304

Neighbouring Cell
UUtranRelation penaltyTimeSib12
Penalty_time
TS 25.331;
TS 25.304
et1
TS 25.304
Temporary_offset
(Temporary_offset1) for
CPICH RSCP Broadcasted
in SIB12
et2
TS 25.304
Temporary_offset
(Temporary_offset2) for
CPICH EC/No Broadcasted
in SIB12
UGsmRelation
UGsmRelation
N/A
N/A
GSM Neighbouring Cell

Object ID
UGsmRelation
refUExternalGsmCe
N/A
ll
N/A
Used External GSM Cell
UGsmRelation
ncToSelfPhyRnc
N/A
N/A
Does Neighbouring Cell

Belong to Self Physical RNC
UGsmRelation
gsmShareCover
N/A
N/A
Share Cover Indication
UGsmRelation
measPrio
N/A
N/A
Measurement Priority of
Neighboring GSM Cell
UGsmRelation
gsmStateMode
N/A
N/A
UE State Indicator Used for

GSM Neighboring Cell
Configuration
UGsmRelation
sib11orSib11bis
N/A
TS 25.331
Broadcast in either SIB11 or

SIB11bis
UGsmRelation
useOfHCS
Use of HCS
TS 25.331
Use of HCS in Cell

Reselection
Quality Offset 1 Between

Serving Cell and
Neighbouring Cell
UGsmRelation
qoffset1SNSib11
Qoffset1s, n
TS 25.331;
TS 25.304
UGsmRelation
qhcsSib11
Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level

(Qhcs) of Neighbouring Cell
UGsmRelation
penaltyTimeSib11
Penalty_time
TS 25.331;
TS 25.304
UGsmRelation
tempOffset1Sib11
et1
TS 25.304
Temporary_offset1 in SIB11
Quality Offset 1 Between

Serving Cell and
Neighbouring Cell
UGsmRelation
qoffset1SNSib12
Qoffset1s, n
TS 25.331;
TS 25.304
UGsmRelation
qhcsSib12
Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level

(Qhcs) of Neighbouring Cell
UGsmRelation
penaltyTimeSib12
Penalty_time
TS 25.331;
TS 25.304
UGsmRelation
tempOffset1Sib12
et1
TS 25.304
Temporary_offset1 in SIB12
UEUtranRelatio
UEUtranRelation
n
N/A
N/A

Object ID
UEUtranRelatio refUExternalEUtran
N/A
n
CellTDD
N/A
Used External EUTRAN Cell

TDD
UEUtranRelatio refUExternalEUtran
N/A
n
CellFDD
N/A
Used External EUTRAN Cell

FDD
UCelSel
UCelSel
N/A
N/A
Cell Selection and

Reselection Information
Object ID
UCelSel
qualMeas
Cell selection
TS 25.331;
and reselection
TS 25.304
quality measure
Measurement Quantity for

Cell Selection and
Reselection
UCelSel
sIntraSearchPre
N/A
TS 25.304
Sintrasearch Configuration
Tag
Intra-Frequency
Measurement Trigger
Threshold for Cell
Reselection (Sintrasearch)
UCelSel
sIntraSearch
Sintrasearch
TS 25.331;
TS 25.304
UCelSel
sInterSearchPre
N/A
TS 25.304
Sintersearch Configuration
Tag
Inter-Frequency
Measurement Trigger
Threshold for Cell
Reselection (Sintersearch)
UCelSel
sInterSearch
Sintersearch
TS 25.331;
TS 25.304
UCelSel
sSearchHCSPre
N/A
TS 25.304
SsearchHCS Configuration
Tag
UCelSel
sSearchHCS
SsearchHCS
TS 25.331;
TS 25.304
Measurement Trigger
Threshold for HCS Cell
Reselection (SsearchHCS)
UCelSel
otherRATInfoPre
N/A
TS 25.304
Inter-System Information
Configuration Tag
UCelSel
sSearchRat
Ssearch, RAT
TS 25.331;
TS 25.304
Inter-System Measurement
Trigger Threshold for Cell
Reselection
UCelSel
sHCSRatPre
N/A
TS 25.304
SHCS RAT Configuration

Tag
UCelSel
sHCSRat
SHCS, RAT
TS 25.331;
TS 25.304
Inter-System Measurement
Trigger Threshold for HCS
Cell Reselection
UCelSel
sLimitRat
Slimit,
SearchRAT
TS 25.331;
TS 25.304
High HCS Priority Intersystem Cell Measurement

Threshold for Cell
Reselection
UCelSel
qqulmnOffstPre
N/A
N/A
Qqualmin-offset Present
UCelSel
qqualminOffset
N/A
TS 25.331
Qqualmin-offset
UCelSel
qrxlvmnOffstPre
N/A
N/A
Qrxlevmin-Offset Present
UCelSel
qrxlevminOffset
N/A
TS 25.331
Qrxlevmin-offset
UCelSel
qHyst1S
Qhyst1s
TS 25.331;
TS 25.304
Reselection Hysteresis 1 of
Serving Cell (QHyst1s)
Serving Cell for UE in
CELL_PCH or URA_PCH
State
UCelSel
qHyst1SPch
Qhyst1s, PCH
TS 25.331;
TS 25.304
UCelSel
qHyst1SFach
Qhyst1s, FACH
TS 25.331;
TS 25.304
Reselection Hysteresis 1of

CELL_FACH State
UCelSel
qHyst2S
Qhyst2s
TS 25.331;
TS 25.304
Serving Cell (QHyst2s)
CELL_PCH or URA_PCH
State
UCelSel
qHyst2SPch
Qhyst2s, PCH
TS 25.331;
TS 25.304
UCelSel
qHyst2SFach
Qhyst2s, FACH
TS 25.331;
TS 25.304
CELL_FACH State
UCelSel
tReselection
Treselections
TS 25.331;
TS 25.304
Cell Reselection Timer Value

(Treselections)
UCelSel
tReselectionPch
Treselections,
PCH
TS 25.331;
TS 25.304

for UE in CELL_PCH or
URA_PCH State
UCelSel
tReselectionFach
Treselections,
FACH
TS 25.331;
TS 25.304

for UE in CELL_FACH State
UCelSel
spSfPre
N/A
TS 25.304
Speed Dependent Scaling

Factor for Treselection
Configuration Tag
UCelSel
spSf
Speed
dependent
TS 25.331;
ScalingFactor
TS 25.304
for Treselection
Speed Dependent Scaling

UCelSel
interFreqSfPre
N/A
TS 25.304
Inter-frequency Scaling
Configuration Tag
UCelSel
interFreqSf
Inter-frequency
TS 25.331;
ScalingFactor
TS 25.304
for Treselection
Inter-frequency Scaling
UCelSel
interRatSfPre
N/A
TS 25.304
Inter-RAT Scaling Factor for

Treselection Configuration
Tag
UCelSel
interRatSf
Inter-RAT
TS 25.331;
ScalingFactor
TS 25.304
for Treselection
Inter-RAT Scaling Factor for

Treselection
NonHCS_TCrmax
Duration for Evaluating

Allowed Amount of Cell
Reselection (s) in Case of
Non-HCS Usage (NonHCS_TCRmax)
UCelSel
noHcsTCrMax
TS 25.331;
TS 25.304
noHcsNCr
TS 25.331;
Non-HCS_NCR
TS 25.304
Maximum Number of Cell

Reselections in Case of
Non-HCS Usage (NonHCS_NCR)
UCelSel
noHcsTCrMaxHyst
NonHCS_TCRmax
Hyst
TS 25.331;
TS 25.304
Additional Time Period

Before the UE Can Revert to
Low-Mobility Measurements
in Case of Non-HCS Usage
(Non-HCS_TCRmaxHyst)
UCelSel
hcsSrvCelInfoPre
N/A
TS 25.304
HCS Serving Cell

Information Configuration
Tag
UCelSel
tCrMax
TCRmax
TS 25.331;
TS 25.304
Duration for Evaluating

Allowed Amount of Cell
Reselection (s) (TCRmax)
UCelSel
nCr
NCR
TS 25.331;
TS 25.304
Maximum Number of Cell

Reselections in Case of HCS
Usage (NCR)
Additional Time Period
Before the UE Can Exit
High-mobility in Case of HCS
Usage (TCrMaxHyst)
UCelSel
UCelSel
tCrMaxHyst
TCrmaxHyst
TS 25.331;
TS 25.304
UCelSel
cellBarredInd
Cell Barred
TS 25.331;
TS 25.304
Cell Barred Indicator
UCelSel
inFreqReselInd
Intra-frequency
TS 25.331;
cell re-selection
TS 25.304
indicator
Intra-frequency Cell
Reselection Indicator
UCelSel
tBarred
Tbarred
TS 25.331;
TS 25.304
Cell Barred Time (Tbarred)
UCelSel
cellRsvExt
Cell
Reservation
Extension
TS 25.331;
TS 25.304
Cell Reservation Extension
UCelSel
acBarred
Access Class
Barred
TS 25.331;
TS 25.304
Access Class N Barred

Indicator (N=0..15)
UCHspa
UCHspa
N/A
N/A

Object ID
UCHspa
numofHspdsch
N/A
N/A
Number of HS-PDSCH
UCHspa
minNumofHspdsch N/A
N/A
Minimum Number of HSPDSCH
UCHspa
maxNumofHspdsch N/A
N/A
Maximum Number of HSPDSCH
UCHspa
numofEagch
N/A
N/A
Number of E-AGCH
UCHspa
numofErgHich
N/A
N/A
Number of E-RGCH/E-HICH
UCHspa
hsShareInd
N/A
N/A

Sharing Indicator
UCHspa
numofHsscch
N/A
N/A
Number of HS-SCCH
UCHspa
hspdschBitRate
N/A
N/A
HS-PDSCH Bit Rate
UCHspa
hspaPwrRatio
HS-PDSCH,
HS-SCCH, EAGCH, ERGCH and EHICH Total
Power
TS 25.433
HSPA Total Downlink Power
UCHspa
minHspaPwrRto
N/A
N/A
Minimum HSPA Total

Downlink Power
UCHspa
maxHspaPwrRto
N/A
N/A
Maximum HSPA Total

Downlink Power
nServToTotalPwr
Target Nonserving E-DCH

to Total E-DCH
Power Ratio
TS 25.433;
TS 25.321
Target Non-serving E-DCH

to Total E-DCH Power Ratio
UCHspa
Maximum
Target Received
TS 25.433
Total Wide
Band Power
Maximum Target Received

Total Wideband Power
UCHspa
maxRTWP
UCHspa
refUGbrResLimitPr
N/A
ofile
N/A
Used Limiting HSDPA GBR

Profile
UCHspa
dpchCodeHy
N/A
N/A
SF512 Number to Increase

HS-PDSCH Number
UCHspa
codeUptHyA
N/A
N/A
SF512 Number to Decrease

HS-PDSCH Number
UCHspa
iurCdReAssDrop
N/A
N/A
Switch for DRNC Code ReAssignment Radio Link

Release
UCHspa
dediComEAGCHSw
N/A
i
N/A
E-AGCH Multiplexing Switch

in Dedicated and Common
E-DCH
UCHspa
cEdchUserNum
N/A
N/A

with Traffic on Common EDCH in Enhanced Uplink
CELL_FACH State
UCHspa
hsNBAssInd
N/A
N/A
HS-PDSCH Code NodeB

Assignment Support
Indicator
UCHspa
userNumPerEagch N/A
N/A
Maximal Scheduled E-DCH

User Number in CELL_DCH
state Scheduled Per EAGCH
UCHspa
eCtrChCongIncSwh N/A
N/A
Switch to Increase the

HSUPA Control Channel
Number by Congestion
UCHspa
maxEAgchNum
N/A
N/A
Maximum E-AGCH Number

for Dedicated E-DCH Users
UCHspa
maxERgHichNum
N/A
N/A
Maximum E-RGCH/HICH
Number for Dedicated EDCH Users
UCHspa
eAgchUpThr
N/A
N/A
User Number Threshold to

Increase E-AGCH Number
UCHspa
eAgchDnThr
N/A
N/A

Decrease E-AGCH Number
UCHspa
eRgHichUpThr
N/A
N/A

Increase E-RGCH/HICH
Number
UCHspa
eRgHichDnThr
N/A
N/A

Decrease E-RGCH/HICH
Number
UCHspa
hsVsR99CdPriInd
N/A
N/A
HSDPA Vs R99 Code Priority

Indicator
UCMbms
UCMbms
N/A
N/A
MBMS Configuration In A
Cell Object ID
UCMbms
qoffMbms
Qoffmbms
UCMbms
hcsOffMbms
HCS_OFFmbm
TS 25.331
s
UCMbms
mbmsSccpchResN
N/A
um
N/A
MBMS S-CCPCH Reserved

Number (Step: S-CCPCH of
64kbps)
UCMbms
mbmsTrafLimit
N/A
N/A
MBMS Traffic Number Limit
UCMbms
mbmsThrputThresh N/A
N/A
MBMS Throughput
Threshold
UCMbms
cellCntSwch
N/A
Cell Counting Switch
N/A
TS 25.331
Additional Offset to Cells

Belonging to the MBMS
Preferred Frequency Layer
When Judging the CellRanking Criterion R of Cell
Reselection for the Non-HCS
Offset
to the Normal HCS
Cell (Qoffmbms)
Priority Level Used for Cells
Belonging to the MBMS
Preferred Frequency Layer
When UE is in Low Mobility
State (HCS_OFFmbms)
UCMbms
toAWS
ToAWS
TS 25.433

Startpoint
UCMbms
toAWE
ToAWE
TS 25.433

Endpoint
UMbmsSa
UMbmsSa
N/A
N/A
MBMS Service Area

UMbmsSa
mbmsSac
N/A
N/A
MBMS Service Area Code
UMbmsPLFreq UMbmsPLFreq
N/A
N/A
MBMS Preferred Frequency

Layer Configuration Object
ID
UMbmsPLFreq freqBandInd
N/A
N/A
Frequency Band Indicator of

the Cells in the MBMS
Service Area
UMbmsPLFreq dUARFCN
N/A
N/A
DUARFCN of the Cells in the

MBMS Service Area
UMbmsPLFreq cellNum
N/A
N/A
Cell Number of a Frequency

Layer in a MBMS SAC
UMbmsPLFreq refULogicalCell
N/A
N/A
Used Logic Cell
UMbmsNPLFre
UMbmsNPLFreq
q
N/A
N/A
MBMS Non Preferred

Frequency Layer Object ID
UMbmsNPLFre
freqBandInd
q
N/A
N/A
Frequency Band Indicator of

the Cells in the MBMS
Service Area
UMbmsNPLFre
dUARFCN
q
N/A
N/A
DUARFCN of the Cells in the

MBMS Service Area
UMbmsNPLFre
cellNum
q
N/A
N/A
Cell Number of a Frequency

Layer in a MBMS SAC
UMbmsNPLFre
refULogicalCell
q
N/A
N/A
Used Logic Cell
UEFach
UEFach
N/A
N/A
EFACH Object ID
UEFach
macehsQID
MAC-ehs queue TS 25.331;

identity
TS 25.433
MAC-ehs Queue Identity
UEFach
chTypeInd
N/A
Channel Type Indicator for

Downlink Enhanced
CELL_FACH Priority Queue
UEFach
spi
Scheduling
TS 25.433
Priority Indicator
Scheduling Priority Indicator

for Downlink Enhanced
CELL_FACH Priority Queue
UEFach
dlEFACHT1
T1
TS 25.433
Re-ordering Release timer

(T1)
UEFach
dlEFACHTreset
Treset
TS 25.433
Reset Timer Controlling the

Reset of the MAC-ehs
Reordering Functionality
UEFach
macehsWinSize
MAC ehs
window size
TS 25.331;
TS 25.433
MAC-ehs Window Size
UEFach
dtcfgInd
N/A
N/A
Discard Timer Configuration

Indication
UEFach
discardTimer
Discard Timer
TS 25.433
Discard Timer
UEFach
maxMacPDUSize
Maximum MAC- TS 25.331;

c PDU Size
TS 25.433
N/A
Maximum MAC-c PDU Size

for Flexible PDU
TS 25.331;
TS 25.433
Enhanced CELL_FACH HSSCCH Power
efachHSPDSCHPw HS-PDSCH
r
Power
TS 25.331;
TS 25.433
Enhanced CELL_FACH HSPDSCH Power
ulIntfCEdchInd
N/A
UL Interference for Common

E-DCH Configured in
SIB5/5bis Indicator
UEFach
efachHSSCCHPwr
UEFach
UEFach
HS-SCCH
Power
N/A
UEFach
pOPpe
Power offset
Pp-e
TS 25.331
Power Offset between the

Last Preamble and the Initial
Power of the DPCCH in
Enhanced Uplink
CELL_FACH State
UEFach
Additional EDCH
addEdchTrBackOff
transmission
back off
TS 25.331
Additional E-DCH
Transmission Back Off for
Common E-DCH
UEFach
commonEdchNum
N/A
Common E-DCH Resources

Number
TS 25.331;
TS 25.433;
TS 25.319
Maximum Common E-DCH

Resource Allocation Time for
CCCH
TS 25.331;
TS 25.319
E-DCH Transmission
Continuation Back Off
TS 25.331;
TS 25.319
Maximum Period for

Collision Resolution Phase
for Common E-DCH
TS 25.331
Uplink Inner Loop Power

Control Algorithm in Uplink
Enhanced CELL_FACH
State
UEFach
UEFach
UEFach
UEFach
N/A
Maximum EDCH resource
allocation for
CCCH,
maximum
maxEdchResCcch
common EDCH resource
allocation time
for
CCCH
E-DCH
transmission
transmission
edchTrConBackOff
continuation
back off
maxPeriCollResol
Maximum
period for
collision
resolution
phase
ulIlPcAlgEFach
Power Control
Algorithm
UEFach
tpcStepSizeEFach
TPC step size
TS 25.331
Step Size of Uplink Inner

Loop Power Control in Uplink
Enhanced CELL_FACH
State
UEFach
mPOEFach
Measurement
Power Offset
TS 25.331;
TS 25.433
HS-PDSCH Measurement
Power Offset (UL Enhanced
CELL_FACH)
UEFach
maxBitRateCEdch
N/A
N/A
Maximum Bit Rate for

Common E-DCH User
UEFach
sirtargetCEdch
UL SIR Target
TS 25.433
SIR Target for Common EDCH
UEFach
fdpchPwrEFach
Initial power on
TS 25.433
F-DPCH
Initial F-DPCH Power in

Uplink Enhanced
CELL_FACH State
UEFach
ulEfachMaxrate
N/A
N/A
Allowed UL Common MAC

Flow Transport Bandwidth
for the Cell
UEFach
ackNackCqiSupInd N/A
N/A
ACK/NACK/CQI Support on
HS-DPCCH Indicator in UL
Enhanced CELL_FACH
State
USccpch
USccpch
N/A
Object ID
USccpch
Common
commPhyChanelId Physical
Channel ID
TS 25.433
S-CCPCH Common Physical

Channel ID
USccpch
sccpchUsage
N/A
TS 25.331;
TS 25.433
SCCPCH Usage
USccpch
maxFachPwr
Max FACH
Power
TS 25.433
Maximum FACH Power
USccpch
sccpchOffset
Timing Offset;
FDD SCCPCH
Offset
TS 25.331;
TS 25.433
Frame Timing Offset

Between SCCPCH and
PCCPCH
USccpch
po1
PO1
TS 25.433
S-CCPCH TFCI Field Power

Offset
USccpch
po3
PO3
TS 25.433
S-CCPCH Pilot Field Power

Offset
N/A
N/A
PRACH Configuration Object

ID
Common
Channel ID
TS 25.433
PRACH Common Physical

Channel ID
prachType
N/A
N/A
Type of PRACH Preamble
rachTti
Transmission
time interval;
Transmission
Time Interval
TS 25.331;
TS 25.433
RACH TTI
signature
Available
Signature ;
Preamble
Signatures
TS 25.331;
TS 25.433
Available Signature
TS 25.331;
TS 25.433
PRACH Available
Subchannel Number
TS 25.331;
TS 25.433
PRACH Preamble
Scrambling Code
UPrach
UPrach
UPrach
UPrach
UPrach
UPrach
N/A
Available Sub
Channel
Number; RACH
Sub Channel
Numbers
Preamble
scrambling
code number;
Scrambling
Code Number
UPrach
availSubChanNum
UPrach
preamScraCode
UPrach
permitMaxASC
N/A
TS 25.331
Permitted Maximum Access

Service Class
UPrach
asigStIdx
Available
signature End
Index
TS 25.331
Available Signature Begin

Index
UPrach
asigEndIdx
Available
signature Start
Index
TS 25.331
Available Signature End

Index
UPrach
asubChNum
Assigned SubChannel
Number
TS 25.331
Assigned Subchannel No.
UPrach
psfNum
N/A
TS 25.331
Persistence Scaling Factor

Number
UPrach
pSF
Persistence
scaling factors
TS 25.331
Persistence Scaling Factor
UPrach
ac2ASCMap
AC-to-ASC
mapping
TS 25.331
AC-to-ASC Mapping
UPrach
dynPstLevelInit
Dynamic
persistence
level
TS 25.331
Initial Dynamic Persistence

Level
UPrach
mmax
Preamble
Retrans Max
TS 25.331;
TS 25.321
Maximum Number of
Preamble Ramping Cycles
UPrach
preamThs
Preamble
Threshold
TS 25.433
Detected Preamble
Threshold
UPrach
constVal
Constant value TS 25.331
PRACH Initiation Tx Power

Constant Value
UPrach
pRStep
Power Ramp
Step
TS 25.331
PRACH Preamble Power

Ramp Step
UPrach
maxPreamRetrans
Preamble
Retrans Max
TS 25.331
Maximum Number of
Preamble Being Transmitted
UPrach
rachCtcId
Common
Transport
Channel ID
TS 25.433
RACH Common Transport

Channel ID
UAich
UAich
N/A
N/A
AICH Configuration Object

ID
UAich
Common
Channel ID
TS 25.433
AICH Common Physical

Channel ID
TS 25.331;
TS 25.433
AICH Transmission Timing
UAich
aichTranTime
AICH
transmission
timing; AICH
Transmission
Timing
N/A
MICH Configuration Object

ID
TS 25.433
MICH Common Physical

Channel ID
Number of NI
per frame;
MICH Mode
TS 25.331;
TS 25.433
Number of NI per Frame
michPwr
MICH Power
offset; MICH
Power
TS 25.331;
TS 25.433
MICH Power
ULdCtrl
ULdCtrl
N/A
N/A
Load Control Information

Object ID
ULdCtrl
maxNumUeOfDecR
N/A
at
N/A
Maximum Number of UE
Decreasing Rate When
Congestion
ULdCtrl
decGbrSw
N/A
Switch for Shielding GBR

Reduction Shared by Uplink
and Downlink
UMich
UMich
N/A
UMich
Common
Channel ID
UMich
niNumPerFrame
UMich
N/A
ULdCtrl
maxGbrDecNum
N/A
N/A
Maximum Number of
Services Whose GBR Can
Be Decreased in Load
Control Every Time Shared
by Uplink and Downlink
ULdCtrl
decRateSw
N/A
N/A
Switch of Rate Downgrade

ahead of Preemption in
Congestion
ULdCtrl
forceHoSw
N/A
N/A
The Switch of Forced

Handover for Online Users in
Congestion
ULdCtrl
forceRabRelSw
N/A
N/A
The Switch of Forced Call

Drop for Online Users in
Congestion
ULdCtrl
forceRabtoFASw
N/A
N/A
The Switch of Forced RAB to

FACH of the online I/B users
in Congestion
ULdCtrl
ulSeriousOverLdThr N/A
N/A
Uplink Serious Overload

Threshold
ULdCtrl
ulOverLdThr
N/A
N/A
Uplink Common Overload

Threshold
ULdCtrl
ulRecoverLdThr
N/A
N/A
Threshold for Releasing from

Uplink Overload
ULdCtrl
ulLdCtrlDecRateSw N/A
N/A
Uplink Switch for Shielding

Rate Reduction
ULdCtrl
ulLdCtrlForceHoSw N/A
N/A

Forced Handover
ULdCtrl
ulLdCtrlDropSw
N/A
N/A

Forced Drop
ULdCtrl
ulMaxDecStg
N/A
N/A
Maximum Number of
Degraded Uplink Load Steps
Every Time
ULdCtrl
ulMaxForHoNum
N/A
N/A
Maximum Number of Uplink

Forced Handover Users
Every Time
ULdCtrl
ulMaxDrpUsrNum
N/A
N/A
Maximum Number of Uplink

Forced Drop Users Every
Time
ULdCtrl
dlSeriousOverLdThr N/A
N/A
Downlink Serious Overload

Threshold
ULdCtrl
dlOverLdThr
N/A
N/A
Downlink Common Overload

Threshold
ULdCtrl
dlRecoverLdThr
N/A
N/A

Downlink Overload
ULdCtrl
dlLdCtrlDecRateSw N/A
N/A
Downlink Switch for

Shielding Rate Reduction
ULdCtrl
dlLdCtrlForceHoSw N/A
N/A
Downlink Switch for

Shielding Forced Handover
ULdCtrl
dlLdCtrlDropSw
N/A
N/A
Downlink Switch for

Shielding Forced Drop
ULdCtrl
dlMaxDecStg
N/A
N/A
Maximum Number of
Degraded Downlink Load
Steps Every Time
ULdCtrl
dlMaxForHoNum
N/A
N/A
Maximum Number of
Downlink Forced Handover
Users or Deleted Radio
Links Every Time
ULdCtrl
dlMaxDrpUsrNum
N/A
N/A
Maximum Number of
Downlink Forced Drop Users
Every Time
ULdCtrl
dlAdjustMFPSw
N/A
N/A
Maximum FACH Power

Adjustment Switch for MBMS
Downlink Load Control
ULdCtrl
hsdschOverLdThr
N/A
N/A
Common Overload
Threshold for HS-DSCH
ULdCtrl
hsdschRecoverThr N/A
N/A

HS-DSCH Overload
ULdCtrl
switchToFachSw
N/A
Switch of Interactive
Class/Background Class
RAB->FACH for Overload
N/A
ULdCtrl
nFach
N/A
N/A
Maximum Users of
Interactive
Class/Background Class
RAB->FACH for Overload
ULdCtrl
aglLdDec
N/A
N/A
Algorithm of Load
Decreasing
ULdCtrl
swchFachDrbcHspa N/A
N/A
Switch of Transferring Online

HS-DSCH or E-DCH I/B
Users to CELL_FACH due to
the User Number Limitation
when Attempting to Transfer
to HS-DSCH or E-DCH
during DRBC
ULdCtrl
rtwpLoadLowThd
N/A
N/A
RTWP Load Low Threshold
ULdCtrl
rtwpLoadMidThd
N/A
N/A
RTWP Load Middle

Threshold
ULdCtrl
rtwpLoadHighThd
N/A
N/A
RTWP Load High Threshold
ULdCtrl
tCPLoadLowThd
N/A
N/A
TCP Load Low Threshold
ULdCtrl
tCPLoadMidThd
N/A
N/A
TCP Load Middle Threshold
ULdCtrl
tCPLoadHighThd
N/A
N/A
TCP Load High Threshold
ULdCtrl
codeLoadLowThd
N/A
N/A
Code Load Low Threshold
ULdCtrl
codeLoadMidThd
N/A
N/A
Code Load Middle Threshold
ULdCtrl
ceLoadLowThd
N/A
N/A
CE Load Low Threshold
ULdCtrl
ceLoadMidThd
N/A
N/A
CE Load Middle Threshold
ULdCtrl
dpaUNumLowThd
N/A
N/A
HSDPA User Number Low

Threshold
ULdCtrl
dpaUNumMidThd
N/A
N/A
HSDPA User Number Middle

Threshold
ULdCtrl
uPAUNumLowThd
N/A
N/A
HSUPA User Number Low

Threshold
ULdCtrl
uPAUNumMidThd
N/A
N/A
HSUPA User Number Middle

Threshold
ULdCtrl
mbmsUNumLowTh
N/A
d
N/A
MBMS User Number Low

Threshold
ULdCtrl
mbmsUNumMidThd N/A
N/A
MBMS User Number Middle

Threshold
ULdCtrl
sigUNumLowThd
N/A
N/A
Signal User Number Low

Threshold
ULdCtrl
sigUNumMidThd
N/A
N/A
Signal User Number Middle

Threshold
UScpich
UScpich
N/A
N/A
SCPICH Configuration
Object ID
UScpich
Common
Channel ID
TS 25.433
S-CPICH Common Physical

Channel ID
UScpich
scpichPwr
Secondary
CPICH Power
TS 25.433
S-CPICH Power
UScpich
mimoScpichPwr
N/A
N/A
MIMO S-CPICH Power
UPich
UPich
N/A
N/A
PICH Configuration Object

ID
UPich
Common
Channel ID
UPich
np
Number of PI
TS 25.331;
per frame; PICH
TS 25.433
Mode
Number of Paging Indicators

per PICH Frame
USrvFunction
USrvFunction
N/A
N/A
Service Function Object ID
USubSrv
USubSrv
N/A
N/A

Object ID
USubSrv
srvType
N/A
N/A
Sub-Service
USubSrv
srvInd
Transmission
Mode
TS 25.423
Service Indicator
USubSrv
minBitRate
N/A
N/A
Minimum Bit Rate
USubSrv
maxBitRate
Maximum Bit
Rate
TS 25.413
Maximum Bit Rate
USubSrv
direction
RAB
Asymmetry
Indicator;
Unidirectional
DCH Indicator
TS 25.413;
TS 25.423
Direction
USubSrv
domain
CN Domain
Type
TS 25.413;
TS 25.423
CN Domain Indicator
USubSrv
trafficClass
Traffic Class
TS 25.413;
TS 25.423
Traffic Class
USubSrv
ptmRlsPerm
N/A
N/A
P-T-M RB Release
Permission
TS 25.433
PICH Common Physical

Channel ID
USubSrv
refUDtxDrxProfile
USubSrv
maxRetransEdch
E-DCH
MAC-d
N/A
flow maximum
number of
retransmissions
; Maximum
Number Of
Retransmission
s For E-DCH;
Maximum
Number of
Retransmission
N/A
s for E-DCH
N/A
Used UE DTX/DRX Profile
TS 25.331;
TS 25.433;
TS 25.423
Maximum Number of
Retransmissions for E-DCH
N/A
Uplink Traffic Eb/N0 used in

Uplink Equivalent AMR User
Number Calculation
Algorithm for Power Control
UUeIntMeasPro
UUeIntMeasProfile N/A
file
N/A
UE Internal Measurement
Profile Object ID
UUeIntMeasPro
profileId
file
N/A
N/A
Profile Id
UAmrEvtTPUeI
UAmrEvtTPUeInt
nt
N/A
N/A

for AMR Object ID
UAmrEvtTPUeI
measRptTrMod
nt
Measurement
Mode
Measurement Report
Transfer Mode
UAmrEvtTPUeI
filterCoeff
nt
Filter Coefficient
UAmrEvtTPUeI
measEvtNum
nt
N/A
TS 25.331
Maximum Event Number of

UAmrEvtTPUeI
meaEvtId
nt
UE internal
event identity
TS 25.331
Event Identity
UAmrEvtTPUeI
trigTime
nt
Time-to-trigger
TS 25.331
Time to Trigger
UAmrEvtTPUeI
txPowerThres
nt
UE Transmitted
Power Tx power TS 25.331
threshold
USubSrv
ulEbN0Pc
UE Transmitted Power
Threshold
N/A

for PS Object ID
UPsEvtTPUeInt UPsEvtTPUeInt
N/A
UPsEvtTPUeInt measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UPsEvtTPUeInt filterCoeff
Filter Coefficient
UPsEvtTPUeInt measEvtNum
N/A
TS 25.331

UPsEvtTPUeInt meaEvtId
UE internal
event identity
TS 25.331
Event Identity
UPsEvtTPUeInt trigTime
Time-to-trigger
TS 25.331
Time to Trigger
UPsEvtTPUeInt txPowerThres
UE Transmitted
threshold
Threshold
UHoEvtTPUeInt UHoEvtTPUeInt
N/A

for Handover Object ID
UHoEvtTPUeInt measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UHoEvtTPUeInt filterCoeff
Filter Coefficient
UHoEvtTPUeInt measEvtNum
N/A
TS 25.331

UHoEvtTPUeInt meaEvtId
UE internal
event identity
TS 25.331
Event Identity
N/A
UHoEvtTPUeInt trigTime
Time-to-trigger
TS 25.331
UHoEvtTPUeInt txPowerThres
UE Transmitted
threshold
Threshold
UE Rx-Tx Time Difference

Period Measurement
Configuration for Location
Object ID
N/A
Time to Trigger
UPrdRttUeInt
UPrdRttUeInt
N/A
UPrdRttUeInt
measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UPrdRttUeInt
filterCoeff
Filter Coefficient
UPrdRttUeInt
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting
UPrdRttUeInt
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval
N/A

Event Measurement
Configuration for UTRAN
Object ID
UEvtRttUeInt
UEvtRttUeInt
N/A
UEvtRttUeInt
measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
UEvtRttUeInt
filterCoeff
Filter Coefficient
UEvtRttUeInt
measEvtNum
N/A
TS 25.331

UEvtRttUeInt
meaEvtId
UE internal
event identity
TS 25.331
Event Identity
UEvtRttUeInt
trigTime
Time-to-trigger
TS 25.331
Time to Trigger
UEvtRttUeInt
txRxTDThres
UE Rx-Tx time
difference
threshold
TS 25.331

Threshold
N/A

Event Measurement
Configuration for RL Timing
Adjustment Object ID
URlEvtRttUeInt URlEvtRttUeInt
N/A
URlEvtRttUeInt measRptTrMod
Measurement
Mode
Measurement Report
Transfer Mode
URlEvtRttUeInt filterCoeff
Filter Coefficient
URlEvtRttUeInt measEvtNum
N/A
TS 25.331

URlEvtRttUeInt meaEvtId
UE internal
event identity
TS 25.331
Event Identity
URlEvtRttUeInt trigTime
Time-to-trigger
TS 25.331
Time to Trigger
URlEvtRttUeInt txRxTDThres
UE Rx-Tx time
difference
threshold
TS 25.331

Threshold
UPwrLimTPUeI
UPwrLimTPUeInt
nt
N/A
N/A

Report Object ID for Power
Limitation Judgement
UPwrLimTPUeI
measRptTrMod
nt
Measurement
Mode
Measurement Report
Transfer Mode
UPwrLimTPUeI
filterCoeff
nt
Filter Coefficient
UPwrLimTPUeI
measEvtNum
nt
N/A
TS 25.331

UPwrLimTPUeI
meaEvtId
nt
UE internal
event identity
TS 25.331
Event Identity
UPwrLimTPUeI
trigTime
nt
Time-to-trigger
TS 25.331
Time to Trigger
UPwrLimTPUeI
txPowerThres
nt
UE Transmitted
threshold
Threshold
UPriSel
UPriSel
N/A
N/A
Cell Reselection Frequency

and Priority Information
Object ID
UPriSel
servCelPriority
priority
TS 25.304;
TS 25.331
Absolute Priority of Serving

Cell for Cell Reselection
sPrioritySearch1
TS 25.304;
Sprioritysearch1
TS 25.331
CPICH RSCP Measurement

Trigger Threshold for
Criteria (Sprioritysearch1)
UPriSel
sPrioritySearch2
TS 25.304;
Sprioritysearch2
TS 25.331
CPICH EcN0 Measurement

Trigger Threshold for
Criteria (Sprioritysearch2)
UPriSel
threshServingLow
Threshserving,
low
TS 25.304;
TS 25.331
Serving Cell Reselection

Threshold for Absolute
Priority Reselection Criteria
UPriSel
thresServingLow2
Threshserving,
low2
TS 25.331;
TS 25.304
Serving Cell Reselection

Threshold 2 for Absolute
Priority Reselection Criteria
UPriSel
utranInterFNum
N/A
TS 25.304;
TS 25.331
Number of UTRAN Centre

Frequencies
UARFCN
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UTRAN Absolute Radio

Frequency Channel Number
UPriSel
UPriSel
utranUARFCN
UPriSel
utranPriority
priority
TS 25.304;
TS 25.331
Absolute Priority of InterFrequency Layers in UTRAN
UPriSel
utranHighThresh
Threshx, high
TS 25.304;
TS 25.331
Reselection Threshold for

Inter-Frequency Layers of
High Priority in UTRAN
UPriSel
utranLowThresh
Threshx, low
TS 25.304;
TS 25.331

Inter-Frequency Layers of
Low Priority in UTRAN
UPriSel
qqualminFDD
QqualminFDD
TS 25.304;
TS 25.331
Qqualmin of UTRAN for Cell

Reselection
UPriSel
qrxlevminFDD
QrxlevminFDD
TS 25.304;
TS 25.331
Qrxlevmin of UTRAN for Cell

Reselection
UPriSel
gsmCellGroupNum N/A
TS 25.304;
TS 25.331
Number of GSM Frequency

Groups
UPriSel
gsmBandIndicator
Band indicator
TS 25.331
Gsm Band Indicator
UPriSel
startARFCN
Starting ARFCN TS 25.331
UPriSel
geranPriority
priority
TS 25.304;
TS 25.331
Absolute Priority of Inter-RAT

Layers in GERAN
UPriSel
qrxlevminGSM
QrxlevminGSM
TS 25.304;
TS 25.331
Qrxlevmin of GSM for Cell

Reselection
UPriSel
geranHighThresh
Threshx, high
TS 25.304;
TS 25.331

Inter-RAT Layers of High
Priority in GERAN
UPriSel
geranLowThresh
Threshx, low
TS 25.304;
TS 25.331

Inter-RAT Layers of Low
Priority in GERAN
GSM Starting ARFCN
UPriSel
eutranInterFNum
N/A
TS 25.304;
TS 25.331
Number of EUTRAN Centre

Frequencies
UPriSel
dlEARFCN
Measurement
Bandwidth
TS 25.331

Number
UPriSel
eutranPriority
priority
TS 25.304;
TS 25.331
Absolute Priority of Inter-RAT

Layers in EUTRAN
UPriSel
allowMeasBand
EARFCN
TS 25.331
EUTRAN Allowed
Measurement Bandwidth
UPriSel
eutranHighThresh
Threshx, high
TS 25.304;
TS 25.331

Priority in EUTRAN
UPriSel
eutranHighThres2
Threshx, high2
TS 25.331;
TS 25.304
Reselection Threshold 2 for

Priority in EUTRAN
UPriSel
eutranLowThresh
Threshx, low
TS 25.304;
TS 25.331

Inter-RAT Layers of Low
Priority in EUTRAN
UPriSel
eutranLowThresh2
Threshx, low2
TS 25.331;
TS 25.304
Reselection Threshold 2 for

Inter-Rat Layers of Low
Priority in EUTRAN
UPriSel
qrxlevminEUTRA
QrxlevminEUTR TS 25.304;
A
TS 25.331
Qrxlevmin of EUTRAN for

Cell Reselection
UPriSel
qqualminEUTRA
QqualminEUTR TS 25.331;
A
TS 25.304
Qqualmin of EUTRAN for

Cell Reselection
UPriSel
threshRsrqInd
N/A
TS 25.331;
TS 25.304
Threshold of RSRQ indicator
UPriSel
eutraDetectionInd
N/A
TS 25.331
E-UTRA Detection Indicator
UPlBal
UPlBal
N/A
N/A
Load Balance Information

Object ID
UPlBal
initRrcLBSw
N/A
N/A
Load Balance Switch of

Initial RRC Procedure
UPlBal
rabAssLBSw
N/A
N/A
Load Balance Switch of RAB

Assignment Procedure
UPlBal
callHoldLBSw
N/A
N/A
Load Balance Switch of Call

Holding Procedure
UPlBal
initRrcSBSw
N/A
N/A
Service Balance Switch of

Initial RRC Procedure
UPlBal
rabAssSBSw
N/A
N/A

RAB Assignment Procedure
UPlBal
callHoldSBSw
N/A
N/A

Call Holding Procedure
UPlBal
dlLdBalPwrSwch
N/A
N/A
Load Balance Switch for

Downlink Power
UPlBal
dlLdBalPwrWeight
N/A
N/A
Downlink Power Weight for

Load Balance
UPlBal
extraCDeltaTrd
N/A
N/A
Permitted Payload
Difference Downlink
Available Load Threshold in
Inter-frequency Cells
(Power)
UPlBal
ulLdBalPwrSwch
N/A
N/A

Uplink Interference
UPlBal
ulLdBalPwrWeight
N/A
N/A
Uplink Interference Weight

for Load Balance
UPlBal
extraCDeltaTru
N/A
N/A
Permitted Payload
Difference Uplink Available
Load Threshold in Interfrequency Cells
(Interference)
UPlBal
ldBalCdSwch
N/A
N/A

Code
UPlBal
ldBalCdWeight
N/A
N/A
Code Weight for Load

Balance
UPlBal
extraCDeltaCdTrd
N/A
N/A
Permitted Payload
Difference Downlink
Inter-frequency Cells (Code)
UPlBal
csBalSwch
N/A
N/A
CS Balance Switch of RAB

Assignment Procedure
N/A
Permitted Payload
Difference Downlink
(HSDPA Throughput)
UPlBal
extraDeltaHsdTrd
N/A
UPlBal
extraDeltaHsuTrd
N/A
N/A
Permitted Payload
Difference Available Load
Threshold in Inter-frequency
Cells (HSUPA Throughput)
UPlBal
ldBalHsdSwch
N/A
N/A

HSDPA Throughput
UPlBal
ldBalCeSwch
N/A
N/A
Load Balance Switch for CE
UPlBal
ldBalBwSwch
N/A
N/A

Bandwidth
UPlBal
dlLdBalHsdWeight
N/A
N/A
HSDPA Throughput Weight

for Load Balance
UPlBal
ulLdBalHsuWeight
N/A
N/A
HSUPA Throughput Weight

for Load Balance
UPlBal
dlCdThdCs
N/A
N/A
UTRAN Downlink Available

Load Balance Threshold
(Code) for CS
UPlBal
dlCdThdR99Ps
N/A
N/A

(Code) for R99 PS
UPlBal
dlPwrThdCs
N/A
N/A

(Power) for CS
UPlBal
dlPwrThdCs4G
N/A
N/A
Inter-RAT Downlink Available

(Power) for CS
UPlBal
dlPwrThdR99Ps
N/A
N/A

(Power) for R99 PS
UPlBal
ulLdThdCs
N/A
N/A
UTRAN Uplink Available

(Interference) for CS
UPlBal
ulLdThdCs4G
N/A
N/A
Inter-System Uplink
Available Load Balance
Threshold (Interference) for
CS
UPlBal
ulLdThdR99Ps
N/A
N/A

(Interference) for R99 PS
N/A

(HSDPAThroughput) for
HSDPA
UPlBal
dlLdHsThdHsd
N/A
UPlBal
ulLdHsThdHsu
N/A
N/A

(HSUPA Throughput) for
HSUPA
UPlBal
csHo4MulRabSwch N/A
N/A
Switch of CS Handover for

CS+PS in Multi-Carrier
Scenario
UPlBal
utraUserNumOff
N/A
User Number Offset of

UTRAN for Balance
N/A
UPlBal
coGsmUserNumOff N/A
N/A
User Number Offset of GSM

in Multi-Mode System for
Balance
UPlBal
gsmUserNumOff
N/A
N/A
User Number Offset of GSM

for Balance
UPlBal
gsmCelCariNum
N/A
N/A
GSM Cell's Carrier Number
UPlBal
rrcDualCarrSw
N/A
N/A
Dual Carrier Balance Switch

of Initial RRC Procedure
UPlBal
rrcHsLdBaOnDchS
N/A
w
N/A
Switch of HSDPA Load

Balance for Signaling on
DCH in RRC Connection
Procedure
UPlBal
hspaPlusCapInd
N/A
N/A
HSPA+ Capability Indicator
UPlBal
rabHspaPluBalSw
N/A
N/A
HSPA+ Balance Switch of

RAB Assignment Procedure
UPlBal
holdHspaPluBalSw N/A
N/A

Call Holding Procedure
UPlBal
hspaPluBalCapPri
N/A
N/A
HSPA+ Capacity Priority
UPlBal
dulCarBalRscpThd N/A
N/A

Dual Carrier HSDPA Balance
UPlBal
dulCarBalEcNoThd N/A
N/A
Cpich EcNo Threshold for

Dual Carrier HSDPA Balance
UPlBal
drRscpQualThrd
N/A

Directed Retry Triggered by
Inter-RAT Balancing
N/A
UPlBal
drEcNoQualThrd
N/A
N/A
Cpich Ec/No Threshold for

Directed Retry Triggered by
Inter-RAT Balancing
UPlBal
ldBalHsdCodFacCh
N/A
o
N/A
Factor Choice in HSDPA

Throughput Load Balance
(Code)
UPlBal
ldBalHsdPwrFacCh
N/A
o
N/A

(Power)
UPlBal
ldBalHsdBandWidF
N/A
acCho
N/A

(Bandwidth)
UPlBal
ldBalHsuSwch
N/A
N/A

HSUPA Throughput
UPlBal
ldBalHspaStrCho
N/A
N/A
Load Balance Strategy for

HSPA Service
UPlBal
ldBalHsdNumSwch N/A
N/A

HSDPA User Number
N/A

(HSDPA User Number) for
HSPA
UPlBal
ldHsdUserNumThd N/A
UPlBal
deltaHsdUsrNumTd N/A
N/A
Permitted Payload
Difference Downlink
(HSDPA User Number)
UPlBal
u2EBalSwch
N/A
N/A
UTRAN to EUTRAN balance

switch
UPlBal
hoCalRestblLBSwc
N/A
h
N/A
Load Balance Switch of

Handover and Call
Reestablishment Procedure
UPlBal
hoCalRestblSBSwc
N/A
h
N/A

Handover and Call
UPlBal
hoHspaPlusBalSw
N/A
N/A

Handover and Call
UPlBal
mulRabBlSwch
N/A
N/A
PS+CS balance switch
UMR
UMR
N/A
N/A
MR Configuration Object ID
UMR
mrUePrdIntraMeas
N/A
Sw
N/A
MR-UE Measurement Type

Switch (Handover)
UMR
mrUePrdInternalMe
N/A
asSw
N/A

Switch (Internal)
UMR
mrUePrdQualityMe
N/A
asSw
N/A

Switch (Quality)
UMR
mrUePrdLocationM
N/A
easSw
N/A

Switch (Location)
UMR
mrUeInitialCallPos
MeasSw
N/A
N/A

Switch (Call-Initial)
UMR
mrUeEvIntraInterIR
N/A
atMeasSw
N/A

Switch (Event Handover)
UMR
mrUeEvInternalMea
N/A
sSw
N/A

Switch (Event Internal)
UMR
mrUeEvQualityMea
N/A
sSw
N/A

Switch (Event Quality)
UMR
mrUeEvTrafficVolM
N/A
easSw
N/A

Switch (Event Traffic)
UMR
mrRnluPrdQualityM
N/A
easSw
N/A
MR-UE Rnlu Periodical

Quality Measurement Type
Switch
UMR
mrUePrdInterFreqM
N/A
easSw
N/A
MR-UE Periodical Inter-freq

Measurement Switch
UMR
mrUePrdInterRatMe
N/A
asSw
N/A
MR-UE Periodical Inter-rat

Measurement Switch
UMR
mrUeMeasRptInterv
N/A
al
N/A
MR-UE Measurement
Reporting Interval
UMR
Measurement
mrUeMeasRptTrMo
d
Mode
MR-UE Measurement Report

Transfer Mode
UMR
mrUeLocMeaRptInt
N/A
erval
N/A
MR-UE Location
Measurement Reporting
Interval
UMR
mrOvdThd
N/A
N/A
MR Overload Threshold
UMR
iniMeasRptTrMod
Measurement
Mode
UMR
mrUeIniCallLocMod
N/A
e
N/A
MR-UE Initial Call Location

Measurement Mode
UMR
mrUePrdLocMode
N/A
N/A
MR-UE Periodical Location

Measurement Mode
UMR
amrBlerEvtSw
N/A
N/A
AMR Bler Event

Measurement Switch
UMR
amrBlerTotalCrc
N/A
N/A
AMR Bler Event

Measurement Total CRC
Number
MR-UE Measurement Report

Transfer Mode of Initial Call
UMR
amrBleErrCrc
N/A
N/A
AMR Bler Event

Measurement Error CRC
Number
UMR
amrBlerPat
N/A
N/A
AMR Bler Event

Measurement Pending After
Trigger CRC Number
UMR
nonAmrBlerEvtSw
N/A
N/A
Non-AMR Bler Event

Measurement Switch
UMR
nonAmrBlerTotalCrc N/A
N/A
Non-AMR Bler Event

Measurement Total CRC
Number
UMR
nonAmrBleErrCrc
N/A
N/A
Non-AMR Bler Event

Measurement Error CRC
Number
UMR
nonAmrBlerPat
N/A
N/A
Non-AMR Bler Event

Measurement Pending After
Trigger CRC Number
UMR
emiMeasInMRSwch N/A
N/A
The Switch for the EMI

Function in MR
UMR
mrUeAcqRatioCs
N/A
N/A
CS MR-UE Acquisition Ratio
UMR
mrUeAcqRatioPs
N/A
N/A
PS MR-UE Acquisition Ratio
UMR
mrServiceTypeCs
N/A
N/A
MR Service Type CS Switch
UMR
mrServiceTypePs
N/A
N/A
MR Service Type PS Switch
UMR
mrServiceTypeCsP
N/A
s
N/A
MR Service Type CS and PS

Switch
UCMR
UCMR
N/A
N/A
Cell MR Configuration Object

ID
UCMR
mrUeMeasSwit
N/A
N/A
MR-UE Measurement Switch
UCMR
mrCellRtwpMeasSw
N/A
it
N/A
MR-CELL Measurement
Switch (Received Total Wide
Band Power)
UCMR
mrCellTcpMeasSwit N/A
N/A
MR-CELL Measurement
Switch (Transmitted Carrier
Power)
UCMR
mrCellAppMeasSwi
N/A
t
N/A
MR-CELL Measurement
Switch (Acknowledged
PRACH preambles)
UCMR
mrCellGpsTimMeas
N/A
Swit
N/A
MR-CELL Measurement
Switch (UTRAN GPS Timing
of Cell Frames for UE
Positioning)
UCMR
mrCellTcpforHsMea
N/A
sSwit
N/A
MR-CELL Measurement
Switch (Transmitted carrier
power of all codes)
UCMR
mrCellHsdschRpMe
N/A
asSwit
N/A
MR-CELL Measurement
Switch (HS-DSCH Required
Power)
UCMR
mrCellHsdschPbrM
N/A
easSwit
N/A
MR-CELL Measurement
Switch (HS-DSCH Provided
Bit Rate)
UCMR
mrCellEdchPbrMea
N/A
sSwit
N/A
MR-CELL Measurement
Switch (E-DCH Provided Bit
Rate)
UCMR
mrCellNonServingR
N/A
gdcMeasSwit
N/A
MR-CELL Measurement
Switch (E-DCH Non-serving
Relative Grant Down
Commands)
UCMR
mrCelMRptIntCoef
N/A
MR-CELL Measurement
Reporting Interval Coefficient
N/A
UCfnOffset
UCfnOffset
N/A
N/A
CFN Offset Configuration

Object ID
UCfnOffset
sigType
N/A
N/A
Signalling Service Type
UCfnOffset
fstRecfgInd
N/A
N/A
Fast ReConfiguration Scene

Indicator
UCfnOffset
retranRate
N/A
N/A
Data Retransmission Rate

Factor over Uu Interface
UCfnOffset
uuPktLenInd
N/A
N/A
Packet Length Type Indicator

over Uu Interface
UCfnOffset
cfnOffset
N/A
N/A
CFN Offset Value
USrvBasedHo
USrvBasedHo
N/A
N/A
Based on Service Object ID
USrvBasedHo
srvHoComStra
N/A
N/A
Service Handover
Combination Strategy
USrvBasedHo
srvHoIndAmr
N/A
N/A
Service Handover Strategy

Indicator (AMR)
USrvBasedHo
srvHoIndCs64
N/A
N/A

Indicator (CS 64K)
USrvBasedHo
srvHoIndPsRT
N/A
N/A

Indicator (PS RT)
USrvBasedHo
srvHoIndPsNRT
N/A
N/A

Indicator (PS NRT)
USrvBasedHo
amrSrvHoStra
N/A
N/A

of RNC for AMR
USrvBasedHo
cs64SrvHoStra
N/A
N/A

of RNC for CS64
USrvBasedHo
psRtSrvHoStra
N/A
N/A

of RNC for PS RT Service
USrvBasedHo
psNrtSrvHoStra
N/A
N/A

of RNC for PS NRT Service
UAppSrvType
UAppSrvType
N/A
N/A
Application Service Type

UAppSrvType
appSrvType
N/A
N/A
Application Service Type
UAppSrvType
trafficClass
N/A
N/A
Service Type
UAppSrvType
arpPriorityLevel
N/A
N/A
ARP Priority Level
UAppSrvType
arpPremptionCap
N/A
N/A
ARP Preemption Capability
UAppSrvType
arpPremptionVul
N/A
N/A
ARP Preemption
Vulnerability
UAppSrvType
arpQueuingAlowed N/A
N/A
ARP Queuing Allowed

Capability
UAppSrvType
basicPrio
N/A
Basic Priority
N/A
UAppSrvType
maxSduSize
N/A
N/A
Maximum SDU Size
UAppSrvType
ulGBR
N/A
N/A
Uplink Guaranteed Bit Rate
UAppSrvType
dlGBR
N/A
N/A
Downlink Guaranteed Bit

Rate
UQChat
UQChat
N/A
N/A

Object ID
UQChat
qChatDRXCycleLen N/A
N/A
QChat DRX Cycle Length
UQChat
qChatDSCPValue
N/A
N/A
QChat DSCP Value
UQChat
tQchatdormancy
N/A
N/A
QChat Dormancy Timer
UQChat
qChatUeMaxNum
N/A
N/A
Max Number of QChat UE

per RCP
UQChat
nReleasedQChat
N/A
N/A
Number of Released QChat

UE when Over Limit
UQChat
postVerifPeriQCh
Post-verification TS 25.331;
period
TS 25.214
Post-verification Period
Configuration Tag for QChat
Service
UQChat
srbDelayQChat
SRB delay;
SRB Delay
TS 25.331;
TS 25.423
SRB Delay for QChat

Service
UQChat
dpcchPcpLenQChat
PC preamble;
PC Preamble
TS 25.331;
TS 25.423
DPCH PC Preamble Length

for QChat Service
UDpiBasPriMap UDpiBasPriMappin
N/A
ping
g
N/A
DPI Basic Priority Mapping

UDpiBasPriMap
AppSrvPriCls
ping
N/A
N/A
Application Service Priority

Class
UDpiBasPriMap
BasicPrio
ping
N/A
N/A
Basic Priority
UDpiBasPriMap
DpiBasicPrio
ping
N/A
N/A
DPI Basic Priority
UDpiDrbc
UDpiDrbc
N/A
N/A

Control Information of DPI
Service Object ID
UDpiDrbc
refUDpiAppSrv
N/A
N/A
Used DPI Application

Service Type
UDpiDrbc
refUDrbcProfile
N/A
N/A
Used Dynamic Radio Bearer

UCNPoolRoutin UCNPoolRoutingFu
N/A
gFunction
nction
N/A
CS/PS Pool Routing

Function Object ID
UIDNNSRouting UIDNNSRouting
N/A
N/A
Configuration of IDNNS
route to Cs/Ps Pool Object
ID
UIDNNSRouting startIdNnsValue
N/A
N/A
Start Value of IDNNS
UIDNNSRouting endIdNnsValue
N/A
N/A
End Value of IDNNS
UIDNNSRouting cSPoolId
N/A
N/A
Resource Pool Identifier in

CS Domain
UIDNNSRouting pSPoolId
N/A
N/A

PS Domain
UIMSIRouting
UIMSIRouting
N/A
N/A
Configuration of IMSI route

to Cs/Ps Pool Object ID
UIMSIRouting
imsiMapRuleNo
N/A
N/A
IMSI Map Rule No
UIMSIRouting
imsiMatchedDigit
N/A
N/A
The Imsi Matched Digit
UIMSIRouting
imsiMaskFlag
N/A
N/A
The Imsi Mask Flag
UIMSIRouting
cSPoolId
N/A
N/A

CS Domain
UIMSIRouting
pSPoolId
N/A
N/A

PS Domain
UENbrBlkList
UENbrBlkList
N/A
N/A
Eutran Neighbouring Cell

Black List Object ID
UENbrBlkList
stateMode
N/A
N/A
State Indicator Used for

EUTRAN Blacklist Cell
Configuration
UENbrBlkList
eutranFreqBandInd N/A
N/A

Indicator
UENbrBlkList
earfcnDl
N/A
N/A

Number
UENbrBlkList
nEutranNum
N/A
N/A
Number of EUTRAN
Blacklist Cells Per
Frequency
UENbrBlkList
neutranCId
N/A
N/A

Identity
UImeiBlkList
UImeiBlkList
N/A
N/A
Imei for Black List Object ID
UImeiBlkList
imeiLen
N/A
N/A
IMEI Length
UImeiBlkList
imeiDigit
N/A
N/A
IMEI
UImeiBlkList
ImeiUuQaMeasure N/A
N/A
IMEI Utility Switch for Barring

Uu Periodical Quality
Measurement
UImeiBlkList
ImeiCsLb
N/A
N/A
IMEI Utility Switch for Barring

CS Load Balance
UImeiBlkList
imeiPcSwitch
N/A
N/A
IMEI Utility Switch for Power

Control
UImeiBlkList
imeiUtilityExt
N/A
N/A
IMEI Utility Extension
UImeiBlkList
imeiULMaxSirOffset N/A
N/A
IMEI Related Offset of Uplink

Maximum SIR Target
UImeiBlkList
imeiULMinSirOffset N/A
N/A
IMEI Related Offset of Uplink

Minimum SIR Target
UImeiBlkList
imeiMaxDlDpchPO N/A
N/A
IMEI Related Offset of

Downlink Maximum DPCH
Power
UImeiBlkList
imeiMinDlDpchPO
N/A
IMEI Related Offset of

Downlink Minimum DPCH
Power
N/A
UImeiTacSPID
UImeiTacSPID
N/A
N/A
Imei TAC List for SPID

Object ID
UImeiTacSPID
imeiTACLen
N/A
N/A
Length of IMEI TAC
UImeiTacSPID
imeiTAC
N/A
N/A
Imei TAC
UImeiTacSPID
refUDePri
N/A
N/A
Used RAN Priority When UE

in Dedicated State
UDePri
UDePri
N/A
N/A
RAN Priority When UE in

Dedicated State Object ID
UDePri
rncSPID
N/A
N/A
RNC SPID
UDePri
eutranFeqNum
N/A
TS 25.331
Number of EUTRAN Centre

Frequencies
UDePri
eutranFreqBandInd N/A
N/A
EUTRAN Frequency Band

Indicator
UDePri
dlEARFCN
EARFCN
TS 25.331

Number
UDePri
eutranDePriority
priority
TS 25.331
Dedicated Priority of
EUTRAN
UDePri
utranFeqNum
N/A
TS 25.331
Number of UTRAN Centre

Frequencies
UDePri
freqBandInd
N/A
N/A
UTRAN Frequency Band

Indicator
UDePri
dlUARFCN
UARFCN
TS 25.331
UTRAN UARFCN of the

downlink carrier frequency
UDePri
utranDePriority
priority
TS 25.331
Dedicated Priority of UTRAN
UDePri
gsmFeqBandNum
N/A
N/A
Number of GSM Band
UDePri
gsmBand
Band indicator
TS 25.331
Gsm Band Indicator
UDePri
gsmDePriority
priority
TS 25.331
Dedicated Priority of GSM
UMPOProfile
UMPOProfile
N/A
N/A
Power Offset Profile Object
ID
UMPOProfile
profileId
N/A
N/A
Power Offset Configuration
Index
UMPO
UMPO
N/A
N/A
Power Offset Configuration
Object ID
UMPO
app64QamInd
N/A
N/A
Actual Configuration of
HSDPA Evolution Function of
UE in the Cell (64QAM)
UMPO
appMimoInd
N/A
N/A
UE in the Cell (MIMO)
UMPO
appDcHsdpaInd
N/A
N/A
UE in the Cell (DC-HSDPA)
UMPO
measPwrOffset
Measurement
Power Offset
TS 25.331;
TS 25.433;
TS 25.423
Power Offset
Parameter Description
This parameter is RNC

The description of Object and
defined by MO designer,
Generally it is composed of
some business key, such as
"RNCID=1001".
The parameter is the network
element identifier and coded in
one NE type.
User
WhenFriendly
NE typeName
is MSCSERVER,
SGSN, MSCSERVER& SGSN,
the value range is 0~4095.
MCC[]+MNC[]+NeId[] can't be
same for different CN nodes.
When NE type is alone MGW,
This
parameter
the
the value
range indicates
is 4096~65535.
shared
network
are
When NE
type ismode.
RNC,There
the value
two
modes
of
shared
network:
range is 0~4095.
GWCN
(Gateway
Core Network)
When NE
type is NODEB,
the
and
valueMOCN
range Multi-Operator
is 0~65535. Core
Network.
access
When NEBoth
type radio
is BME,
the value
network
core network are
range is and
0~65535.
shared in GWCN mode. Only
radio
access network
is shared
This parameter
indicates
the
by
in
MOCN
mode.
method of PLMN selection ,
when MOCN is used for network
sharing
Instance
Related FG
Value Range and

Step
Unit
RNC
Basic Identification
Parameter
0..2147483647
N/A
N/A
N/A
300 char
N/A
N/A
N/A
80 char
N/A
NE Office
Iu Flex
RNC
RAN Sharing
RNC
RAN Sharing

type of transport channel and
signalling rate for initial RRC
connection setup.
RNC
Dynamic Radio
Bearer Control
This parameter indicates where

RNC can get GPS information
from.
RNC
Location Service

duration of the inter-sys cell's
RNC
load information which is valid to
use.before updating.
downlink Non-Conversational
service maximum size in octets
RNC
of the MAC level PDU when an
extended MAC level PDU size is
required.
downlink Conversational service
maximum size in octets of the
RNC
MAC level PDU when an
extended MAC level PDU size is
required.
Handover Control
HSPA Evolution
HSPA Evolution
0: Forced to
CELL_DCH and
0..4095
Using DCH/DCH
with Low Rate
Signaling
0: Forced
GWCN to
1:
1: MOCN and
CELL_DCH
2:
MultiDCH/DCH
Plmn
Using
0xFF:13.6k
No Shared
with
Network
Signaling
2:
to CS
0: Forced
IMSI-based
CELL_FACH
& PS Coordination
3:
Forced,
1: Not
Random
Using
Low Rate
Selection
Signaling on
Cell_DCH State
4: Not Forced,
Using DCH/DCH
with 13.6k
Signaling on
Cell_DCH
State
0: Self
5:
(Forced
to
1: Neighbouring
CELL_DCH
and
RNC;
Using
DCH/DCH
2: Exterior
with
27.2k
Network
Signaling
6: Not Forced,
Using DCH/DCH
with
27.2kStep 1
0..65535,
Signaling on
Cell_DCH State
7: Forced to HSPA
8: Not Forced,
Using
HSPA
1..1505,
Step 1
signaling on
CELL_DCH state
1..1505, Step 1
N/A
N/A
N/A
N/A
N/A
bytes
bytes

Uplink Conversational service
uplink RLC PDU in the flexible
RLC PDU size mode.
Uplink Conversational service
minimum size in octets of the
uplink RLC PDU in the flexible
RLC PDU size mode.
service maximum size in octets
of the uplink RLC PDU in the
flexible RLC PDU size mode.
service minimum size in octets of
the uplink RLC PDU in the
flexible
RLC PDU
size mode.
This parameter
indicates
the RV
configuration
selected
by
RNC
when the E-DCH
maximum
bit rate Harq
with HS-SCCH
Combining
Capability IE in
Less for Non-VoIP/AMR.
AUDIT
RESPONSE
returned
Non-VoIP/AMR services
are by
NodeB
takes
the
value
of
and
allowed to use HS-SCCH 'IR
Less
Chase
Combining
Capable'
function only when the following
conditions are all satisfied:
(1) HS-SCCH Less Switch is
"On";
(2) HS-SCCH Less Switch for
Non-VoIP/AMR is "On";
(3) The
assigned
maximum
This
parameter
specifies
the bit
rate
less than
Bit Rate call
RRCisRedirect
forMax
emergency
with
HS-SCCH
function
switch.Less for NonVoIP/AMR.
Specifies the Amr cut decision
when IuUP version including
V1+V2 in the inter-RAT case
Specifies the Amr cut decision

V1+V2 in the intra-RAT case
This parameter indicates
whether non emergency CS
service access to CELL_FACH
on
RRC
process.
If this switch
This
parameter
indicates
the is
"time
Off"interval
, It means
non
emergency
of issuing interCS servicemeasurement
will not accessand
to
frequency
FACH/RACH
or HSinter-RAT measurement.
When
DSCH/RACH
on RRC process.
RNC issues inter-frequency
measurement, the timer is start.
If the quality of non-used
frequency
is badindicates
during the
This
parameter
DCtime
length
indicated
by this
redirection
strategy
switch. When
parameter,
will
the switch isRNC
" On"
, ifissue
UE interRAT
measurement
if
there
is cell
an
supports DC and the access
inter-RAT
neighboring
cell.
don't support DC, RNC will
redirect UE to other frequency
with DC capability via the RRC
Connection Reject procedure.
RNC
HSPA Evolution
2..1505, Step 1
bytes
RNC
HSPA Evolution
2..1505, Step 1
bytes
RNC
HSPA Evolution
2..1505, Step 1
bytes
RNC
HSPA Evolution
2..1505, Step 1
bytes
RNC
HSUPA Introduction
0: RV0
1: RV Table
N/A
RNC
HSPA Evolution
0: 16
1: 32
2: 64
3: 128
4: 256
5: 384
kbps
RNC
Connection
Management
0: Off
1: On
N/A
RNC
AMR-NB & AMRWB
RNC
AMR-NB & AMRWB
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
handover control
1..20, Step 1
RNC
load balance
0: Off
1: On
N/A
1: Cut
2: Not Cut
N/A
1: Cut
2: Not Cut
N/A

maximum number of UE in a cell
whose transport resource will be
released while transport path is
overload.
The parameter indicates the
The
parameter
indicates of RRC
interval
of retransmission
maximum
number
of
CONNECTION SETUP
retransmissions
of
the RRC
message.
CONNECTION
SEUTP
message
Start:
Transmission
of RRC
CONNECTION SETUP.
Stop: Reception of RRC
CONNECTION SETUP
COMPLETE.
At expiry: Retransmit RRC
CONNECTION REQUEST if the
This
timesparameter
of transmitindicates
RRC the
maximum
number
of
CONNECTION
REQUEST
=<
retransmissions
of the
RRC
RrcSetupRetraNum,
else
release
CONNECTION
RELEASE
the RRC connection
of UE
COMPLETE.
maximum number of
retransmissions of the RRC
CONNECTION
This
parameter RELEASE.
indicates the
time of determining the
maximum buffering of the voice
frames in PDCP when CS voice
maps on HS-DSCH/E-DCH. If
This
that
data parameter
can not be indicates
transferred
in
after
switching
from HStime when
CS counter
expires,
DSCH/DCH
the data will or
be HS-DSCH/E-DCH
discarded.
to DCH/DCH triggered by
channel quality or traffic volume,
this timer starts. When it expires,
switching from DCH/DCH to HSThis
parameter
indicates when
DSCH/DCH
or HS-DSCH/E-DCH
uplink
or
downlink
meets the
is allowed.
requirements for rate adjustment
(upswitching) first, the wait timer
for waiting the opposite direction
This
parameter by
indicates
when
reconfiguration
one step.
uplink or downlink meets the
requirements for rate adjustment
(downswitching) first, the wait
timer for waiting the opposite
direction
reconfiguration
by time
one
This parameter
defines the
step.
period the RNC has to wait
before receiving the RADIO
BEARER RECONFIGURATION
COMPLETE when the RNC
orders the UE Leaving
CELL_DCH
to CELL_FACH.
This parameter
indicates
whether Iu uplink data is
delivered in sequence based on
indication of RAB assignment
from CN.
his parameter indicates if RNC
supports UE location
measurement over Iur interface
in LCS Function.
RNC
Transport Resource
0..255
Release Control
N/A
RNC
Connection
Management
0..10
N/A
RNC
Connection
Management
0..100, Step 1
100ms
RNC
Connection
Management
1..8
N/A
RNC
Connection
Management
1..10
N/A
RNC
CS over HSPA
20..200, step 10
ms
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1
100ms
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1
100ms
RNC
connection
management
1..60, Step 1
RNC
IP UTRAN
0: False
1: True
N/A
RNC
Location Service
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC

RNC
supports MBMS Multicast Mode
MBMS
0: Not Supported
1: Supported
N/A

supports MBMS Enhanced
RNC
Broadcast Mode
MBMS
0: Not Supported
1: Supported
N/A

supports MBMS UE registration RNC
over Iur function.
MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to

indicate whether 8 kbps MBMS
service is supported or not
RNC
MBMS
0: Not Supported
1: Supported
N/A

indicate whether 16 kbps MBMS RNC
MBMS
0: Not Supported
1: Supported
N/A

MBMS
0: Not Supported
1: Supported
N/A

MBMS
0: Not Supported
1: Supported
N/A

indicate whether 128 kbps
MBMS service is supported or
not
RNC
MBMS
0: Not Supported
1: Supported
N/A
RNC
MBMS
0: Not Supported
1: Supported
N/A
RNC
Handover Control
-24..0, step 1
dB
RNC
Handover Control
-115..-25, step 1
dBm
RNC
IU RESOURCE
RESET
10..6000, Step 1
100ms

indicate whether 256 kbps
MBMS service is supported or
This
not parameter indicates the
Cpich EcNo minimum threshold
for intra frequency handover. If
reported Cpich EcNo is less than
IntraHoEcNoThrd or Cpich
RSCP
is less than
This parameter
indicates the
IntraHoRscpThrd,
intra threshold
Cpich RSCP minimum
frequency
handover
will not be
for intra frequency handover.
If
triggered.Cpich EcNo is less than
reported
IntraHoEcNoThrd or Cpich
RSCP is less than
Specifies
the timerintra
for State
IntraHoRscpThrd,
Query.
frequency handover will not be
When
in FAIL status, the CN
triggered.
Monitor Module should check the
signalling point and user service
status periodically according to
the timer Tcnquery.
This parameter is one factor of

the protocolparameter that
Specifies
the window
switch for
the CBSof
indicates the
startpoint
function.
the PCH FP. DL data frames are
expected to be received after this
window startpoint. Time of Arrival
This
parameter
indicates
the is
Window
Startpoint
(ToAWS)
window
endpoint
of thevalue
PCH FP.
defined with
a positive
DL
dataTime
frames
are expected
to
relative
of Arrival
Window
be
received
before
this
window
Endpoint (ToAWE). ToAWS and
endpoint.
Time of
Arrival
Window
ToAWE
together
the
size
This parameter
isdefine
one factor
of
Endpoint
(ToAWE)
is
defined
of
the
arrival
window
in
Node
the protocolparameter that B.
with
a positive
value relative
A data
frame
arriving
outside the
indicates
the window
startpoint
of
Latest
Time
ofDL
Arrival
arrival
window
gives
a(LToA).
Timing
the
FACH
FP.
data
frames
ToAWS
andControl
ToAWE
togetherafter
Adjustment
Frame
are
expected
to be received
define
the
size
of
the
Response
Node arrival
B.
this
windowfrom
startpoint.
Time of
window
in
Node
B. A data frame
Arrival
Window
Startpoint
This
parameter indicates
the
arriving
the arrival
(ToAWS)outside
is defined
withFACH
a
window
endpoint
of
the
window gives
arelative
TimingTime of
positive
value
FP.
DL data
frames
are expected
Adjustment
Control
Frame
Arrival
Window
Endpoint
to
be
received
before
this
Response
from Node
(ToAWE).
ToAWS
andB.
ToAWE
window endpoint.
Time
of Arrival
together
define
the
size
of the
Window Endpoint (ToAWE)
is
arrival
window
in
Node
B.
A data
defined with a positive value
frame
arrival
relativearriving
Latest outside
Time of the
Arrival
window
gives
a
Timing
(LToA). ToAWS and ToAWE
Adjustment
Control
Frame
together define
the size
of the
Response
from
Node
arrival window in NodeB.B. A data
Inactivity
Time outside
of E-DCH
frame arriving
the arrival
Transmission,
Should Go
window gives aUE
Timing
Into
E-FACHControl
DRX State
when
Adjustment
Frame
times
out. from Node B.
Response
On the State Of E-FACH DRX,
This Parameter Indicates Cycle
Length of Discontinue Receiving
of E-FACH.
On the State of E-FACH DRX,
This Parameter Indicates
Several Frames
Using
Specifies
the time
delayforofHSIU
DSCH Detection
in the Cycle
Release
Resource.
Length
of Discontinue
Start:
RNC
receives
a Receiving
The
Parameter
Indicates
of
HS-DSCH.
DOWNLINK
DIRECT
Whether
DRX
Operation Can Be
TRANSFER
messageUsers.
from CN
Used By All E_FACH
The
at
Time1,
or
value
"0" means
only UL
RNC receives
a UPLINK
E_FACH
UE Could
Use
DIRECT
TRANSFER
message
Enhanced DRX, And The
Value
from
UE atAll
Time1
"1" Means
E_FACH UE Could
Then
RNC receives
Use
Enhanced
DRX. a IU
This
parameter
is used from
for the
RELEASE
COMMAND
the
difficult
reception of UE in the
CN at Time2.
connection
mode.
This is less
If Time2 minus
Time1
parameter
is usedRNC
to calculate
then Tiureldelay,
start timer
the
paging
occasion,
which length is equal that
to is, a
This
parameter
indicates
constant
required
in monitoring
Tiureldelay
- (Time2-Time1),
else
balance
switch
based
on
the
cycle.
The
difficult
RNCPICH
release
the
Iu resource
measurement.
switch isIn
reception
cycleIfisthis
2k frames.
immediately.
on,
neighboring
cells
with
the
connection
k isit the
Stop:
If Timer ismode,
started,
"neighbor"
or
"contained
in"
minimum
value
in
CS
domain
needn't stop until it expired.
relation
use
measurement-based
DRX
cycle
length
coefficient,
At expiry: Rnc will release thePS
Iu
balance;
neighboring
cells with
domain
DRX
cycle length
resource.
"Overlap"
"Covers"
relation
coefficient,orand
UTRAN
DRX
may
also
use
measurementcycle length coefficient.
based balance only if
CoverMeaBalSwch is on too.
Otherwise, only blind handoverbased balance will be performed
to the neighboring cells with
"Overlap" or "Covers" relation.
RNC
CBS
0: Off
1: On
N/A
Rnc
Node B
Management
0..1279, step 1
ms
Rnc
Node B
Management
0..2559, step 1
ms
Rnc
Node B
Management
0..1279, step 1
ms
Rnc
Node B
Management
0..2559, step 1
ms
HSPA Evolution
0: 100
1: 200
2: 400
3: 800
ms
HSPA Evolution
0: 4 frames
1: 8 frames
2: 16 frames
3: 32 frames
N/A
RNC
RNC
0: 1
1: 2
2: 4
frames
3: 8
4: 16
0: only UL E_Fach
UE support
1: support all
N/A
E_FACH
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
IU RESOURCE
RELEASE
1..50, Step 1
100ms
RNC
Connection
Management
3..9
N/A
RNC
Load Balance
0: Off
1: On
N/A

balance switch based on
measurement. If the
RabMeaBalStaSwch and
CoverMeaBalSwch is on,
balance based on measurement
will be performed to the
neighboring
cellsindicates
with
This
the
This parameter
parameter
indicates
timer of
overlapping
or
covering
relation,
time
threshold
that
the
RNC
deactivate compressed modemay
for
otherwise,
balance
based
resend
MEASUREMENT
balancethe
strategy
based
onon
blind
handover
will be the
performed
CONTROL
RELEASE.
measurement.
When
timer
to the neighboring
When
RNC
sends cells with
expired,
if inter-frequency
event
overlapping
covering
MEASUREMENT
CONGROL
(2C) doesn'tor
report,
RNCrelation.
will
RELEASE
message
for a
judge whether
compressed
measurement
ID,
the
stamp
mode is deactivate or time
not based
will
be
recorded.
If
RNC
receives
on current signal quality.
the measurement report for the
ID, it will be compared between
current time and recorded time.
If difference between current
time
recorded
time exceed
This and
parameter
indicates
the UE
the
threshold
configured,
the
of Release 4 and before Release
MEASUREMENT
CONTROL
4 Version whether to be
RELEASE
will bebeat
resent,
performed heart
detection.
otherwise ignore this
measurement report.
This parameter indicates the UE
of Release 5 Version whether to
be performed heart beat
detection.
RNC
Load Balance
0: Off
1: On
N/A
RNC
Load Balance
1..255, step 1
RNC
Handover Control
1..255, Step 1
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A

RNC
detection.
Dynamic Radio
Bearer Control
0: False
1: True
N/A

RNC
detection.
Dynamic Radio
Bearer Control
0: False
1: True
N/A
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1
100ms
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Parameter for future

0..1000, step 10
use
ms
RNC
Radio Link Restore
100ms

of Release 8 and after Release 8
Version
whetherindicates
to be performed
This parameter
the
heart beat
detection.
period
of UE
heart beat. In order
to avoid UE (before R8)sending
Signalling Connection Release
Indication
(SCRI)and
release
This parameter
indicates
signalling
initiatively,
RNC
would
whether only judge downlink
operated
heart beat
beat for
check
when
traffic
on heart
channel
no
data transmission
with
switching
to PCH/IDLE.
If itCN,
UE
will not
send
SCRI
switches
on,
means
nowhen
need to
receive
data.
consider the restriction of uplink
Specifies
time of
Waiting
for
traffic on heart
beat
for channel
RADIO
LINK
RESTORE
switching to PCH/IDLE. If switch
INDICATION.
off,
the downward
Chanelthe
This
indicates
If
theparameter
RNCneed
receives
a RADIO
switching
to
consider
the
BER
target
adjust
timer in fast
LINK
SETUP
RESPONSE
uplink
measurement
report
OLPC
SIRfrom
target
message
thedownward
restriction
on
heart
beat.
adjustment
based
on
BER.
NodeB/DRNC, If the
RNC
When thea timer
expires,
the BER
receives
RADIO
LINK ADD
target
will be message
adjusted. from the
RESPONSE
NodeB/DRNC, and the RL
belongs to a new RlSet, If the
RNC receives a RADIO LINK
FAILURE INDICATION message
from the NodeB/DRNC, and the
cause is synchronisation_failure
or
not_enough_user_plane_proces
sing_resources, the RNC shall
wait the RADIO LINK RESTORE
1..200, Step 1
time length for CELL UPDATE

after RNC sending Radio Link
Deactivation command after RB
Setup/Reconfiguration/Release
The
parameter
Time of
Response
Timerindicates
Expiration..
Waiting
for
RB
Start: Transmission of Radio Link
Setup/Reconfiguration
forof
The
parameter
indicates
time
Deactivation
in case
of (not
RNC
hard-handover)/Release
Waiting
for
CELL
UPDATE
After
found rl failure or rlc
Response
overerror
Uu Interface
RB
Setup/Reconfiguration
(not
unrecoverable
or doesn't
Start:
When
the
RNC
send
for
hard-handover)/Release
receive response message the
from
RADIO
BEARER
SETUP or
Response
Timer Expiration
UE.
RADIO
BEARER
or
Start:
When
the RNC
send RL
Stop: Reception
ofRELEASE
CELL
RADIO
BEARER
RADIO
LINK ACTIVATION
UPDATE
RECONFIGURATION
oror
COMMAND
to NODEB
At expiry: Release
RRC
TRANSPORT
CHANNEL
DRNC.
connection of UE.
RECONFIGURATION
or
Stop: When the RNC receives
PHYSICAL
CHANNEL
the CELL UDPATE from UE.
RECONFIGURATION
message
At expiry: The RNC releases
all
to
UE.
RRC connection of UE.
Stop:
When theindicate
RNC receives
The parameter
timer
the RADIO
BEARER
SETUP
length
of waiting
for RRC
COMPLETE
or RADIO
BEARER
CONNECTION
COMPLETE
RELEASE
COMPLETE
or
Start: Send RRC CONNECTION
RADIO
BEARER
SETUP
RECONFIGURATION
Stop: Receive RRC
COMPLETE
or TRANSPORT
CONNECTION
SETUP
CHANNEL RECONFIGURATION
COMPLETE
COMPLETE
or PHYSICAL
Expiration:
Release
RL whether
The
parameter
indicates
CHANNEL
RECONFIGURATION
his
parameter
indicates
timer
apply
fast reconfiguration
COMPLETE
from
UE.
length
waiting
for
SRNS
function
HS service
cell
At
expiry:when
The
RNC
send Radio
CONTEXT
REQUEST
was
changed.
Link
Command
Start:Deactivation
When cell relocate
to to
all
RLS.
another
RAT, theindicates
timer is started.
This parameter
timer
Expiration:
Send
RELEASE
length
waiting
for IU
SRNS
DATA
REQ
and start
another timer for
FORWARD
COMMAND.
waiting
IU
RELEASE
Start: After SRNS send
COMMAND
from CN. to CN,
CONTEXT RESPONSE
Stop:
When
receive SRNS
the timer is started.
CONTEXT
REQUEST,
stop the
Expiration: Send IU RELEASE
timer.
This
indicates
timer
REQparameter
and start another
timer
for
length
waiting for IU
waitingthat
IU RELEASE
RELEASE
COMMANDCOMMAND
from CN.
Start:
After SRNS
DATA
Stop: When
SRNSreceive
receives
Network
resource
identifier
(NRI)
FORWARD
COMMAND
or
SRNS DATA FORWARD timer
is
unique
identify
theisCN
waiting
fortothe
message
hasnode
COMMAND,
the
timer
in
a pool area of CS/PS domain,
expired.
stopped.
itExpiration:
is allocated
by CN Iu
node
and
Release
resource.
included
in TMSI/P-TMSI
to IU
Stop: When
SRNS receives
inform
UE. COMMAND,
According to the
protocol,
RELEASE
timer
the
lengthresource
of NRI isidentifier
variable(NRI)
(0is stopped.
Network
10
bit, thetohighest
is the
is unique
identifybitthe
CN 23-bit
node
of
number
of
in aTMSI/P-TMSI).The
pool area of CS/PS
domain,
NRI
bit
is
configured
according
it is allocated by CN node and to
the
pool area
network andtothe
included
in TMSI/P-TMSI
NRI
allocation
strategytoinprotocol,
CN
inform UE. According
node.
The of
NRI
length
shall be
the length
NRI
is variable
(0same
allhighest
CN nodes
a 23-bit
10 bit,inthe
bit isofthe
CS/PS
pool area.
of
TMSI/P-TMSI).The
number of
This
parameter indicates
NRI
bit
is
configured
according
to
whether the CN assignment
the pool
area service
networkisand
the
GBR
of AMR
forcibly
NRI
allocation
strategy
in CNthe
reserved
in Iu UP
V1, when
This
parameter
indicates
node.
CN
assignment
GBR is not
Location
Mode Method.The
matching
with
the
AMR includes
rate
Location mode method
configured
by
RNC.
RNC location and SAS
location.RNC location uses RNC
inner location module to position,
and SAS location supports SAS
centric mode, which uses SAS to
choice position method (eg, cell
ID , AGPS etc.) and accomplish
position.
RNC
RB Reestablishment
1..500, Step 1
100ms
RNC
RB Reestablishment
10..200, Step 1
100ms
RNC
RB Reestablishment
1..10, Step 1
RNC
Connection
Management
10..100, Step 1
100ms
RNC
Node B
Management
0: Off
1: On
N/A
RNC
Handover Control
1..500, Step 1
100ms
RNC
Handover Control
1..500, Step 1
100ms
RNC
Handover Control
1..500, Step 1
100ms
NE Office
Iu Flex
0~10, 0: not
Support IU FLEX
N/A
RNC
Iu Flex
0..10
N/A
RNC
AMR-NB & AMRWB
0: False
1: True
N/A
RNC
Location service
0: RNC Location
Mode
1: SAS Location
Mode
N/A

QChat is supported or not
RNC
QChat
RNC Switch of Fast Return to ERNC

UTRAN
Handover control
The switch of controlled whether

or not reserved RUB for one
Rnc
specific UE
Connection
management
Management the protocol

version of UE for reserved RUB
Rnc
Connection
management
This parameter indicates which

target Cell judgment strategy
adopt for access/handover
algorithm in shared network.
RNC
Handover Control

whether support HCS or not in
RNC
Cell Reselection and in
Handover.
This
parameter indicates
whether to judge the IE "Device
type" in the message "RRC
Connection Setup Complete" ,
RNC
when judge the conditions
should be satisfied for UE which
is performed heart beat
detection.
Specifies the CDT overload
RNC
control function.
SRNC
waiting time
for thewhen
This parameter
indicates
RECONFIGURATION
RRC
on HS channel whether it is
COMPLETE
message
from
also allowed to
setup on
DC.the RNC
UE
when
the
UE
leaving
PCH or
When it is "Yes", if secondary
FACH
state
and
entering
carrier of DC has already been
CELL_DCH
state.
selected during
RRC procedure,
there is no selection of
secondary carrier change during RNC
RAB assignment procedure.
When it is "No", there is no
secondary carrier selection
during RRC procedure;
secondary carrier will be
selected during RAB assignment
procedure.
Handover Control
Dynamic Radio
Bearer Control
0: Not Supported
1: Supported
0: Off
1: On
0: Off
1: Switch On ,
RUP Reserved for
high-version UE
2:
On, RUP
0: Switch
No Reserved
Reserved for VIP
RUB
User
1: R3
2: R4
3: R5
4: R6
5: Judgment
R7
0:
6:
R8 on
Based
7:
R9
0:
Not Support
Authorization
HCS
Information
1:
HCS in
1: Support
Judgment
Cell
Reselection,
Based on Selected
Not
Support HCS
PLMN
in Handover
2: Not Support
HCS in Cell
Reselection,
Support HCS in
Handover
3: Support HCS in
0:
FALSE
Cell
Reselection,
1:
TRUEHCS in
Support
Handover
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Call Detail Trace
1..100, Step 1
connection
management
1..60, Step 1
Load Balance
0: FALSE
1: TRUE
N/A

switch of using DL POWER
CONTROL REQUEST
information in Iur Interface to
control power balancing.
When the switch is on, DRNC
send the DL POWER CONTROL
REQUEST information to Node
B which is same with the DL
RNC
POWER CONTROL REQUEST
information send by SRNC
through Iur interface.
When the switch is off, DRNC
would discard the DL POWER
CONTROL REQUEST
information send by SRNC
through
Iur interface.
This parameter
indicates the
offset of CPICH Ec/No in Iur
interface relative to the CPICH
Ec/No of measurement result.
The CPICH Ec/No in Iur interface RNC
is calculated by the CPICH
Ec/No of UE measurement result
minus this offset.
Power Control
0: Off
1: On
N/A
Power Control
0..30, step 1
dB
0: Not Allowed
1: Allowed
N/A

whether the switch to
URA_PCH/CELL_PCH is
RNC
allowed for the UE of Release 99
and Release 4.
Dynamic Radio
Bearer Control
The switch of controlled whether

Rnc
or not started UTRA SI
Handover Control
0: Off
1: On
N/A
Deep Packet
Inspection
0..65535, step 20
ms
Deep Packet
Inspection
1..65535, Step 1
bytes
Deep Packet
Inspection
0..65535, step 20
ms
This parameter indicates that the

RNC support the user-defined
RNC
PLMN selection or not
RAN Sharing
0: FALSE
1: TRUE
N/A
This parameter indicates that the

RNC can Broadcast the Multiple RNC
PLMNs in MIB or not
RAN Sharing
0: FALSE
1: TRUE
N/A

detection period which is used by
RNC
user plane for application service
This
parameter indicates the
detection.
total data number should be
reached during one application
service detection period. If the
total data number is smaller than RNC
this parameter, the application
service detection should not be
implemented
in indicates
this detection
This
parameter
the
period.
minimum time that the user
plane reports the application
RNC
service type to control plane
again after last report.

whether the RNC Send RL
SETUP and RRC CONNECTION RNC
SETUP in parallel when setting
up RRC CONNECTION
applied feature info of Ue for
Routing CN
maximum CS service number
when the board is permit power
off based on energy
conservation.
maximum UE context number
off based on energy
conservation.
maximum CS service number
off based on board attribution
switch.
maximum UE context number
off based on board attribution
switch.
Before the board power off, it will
delay a period which the
parameter is configured in order
that most service auto hang
off.thus will decrease the call
drop rate.
whether using Faster L1 DCH
synchronization,
the PostSpecifies the userset
admission
verification
period
in
Uuthe
interface
control threshold after
CMP
with
value
'TRUE'.
board is normal run. If the
threshold value is 0, it means
there is no need to do user
admission
control.
If the
Specifies the
user admission
threshold
value
is
greater
control threshold after the than
DMP0,
itboard
means
the
admitted
RRC
is normalindicates
run. If thewaiting
The
parameter
CONNECTION
REQUEST
threshold
value
is
0, itUPDATE
means
time
length
for
CELL
number
perneed
second
shall
not be
thereRNC
is no
to Radio
do
user
after
sending
Link
greater
than
the threshold
value.
admission
control.
If
the
Deactivation command after RB
threshold
value is greater than 0,
Setup/Reconfiguration/Release
itResponse
means the
admitted
RRC
Timer
Expiration..
CONNECTION
REQUEST
Start: Transmission of Radio Link
number per second
not be
Deactivation
in caseshall
of RNC
greater
theorthreshold
value.
found rl than
failure
rlc
unrecoverable error or doesn't
receive response message from
UE.
Stop:parameter
Receptionindicates
of CELL RNC
This
UPDATE
support Virtual LAC Paging or
At
notexpiry: Release RRC
connection of UE.
Connection
Management
0: Off
1: On
0: None
1: Use IMSI
2: Use IDNNS
N/A
RNC
RAN Sharing
N/A
RNC
Dynamic Load
Energy Saving
0..65535
N/A
RNC
Dynamic Load
Energy Saving
0..65535
N/A
RNC
Dynamic Load
Energy Saving
0..65535
N/A
RNC
Dynamic Load
Energy Saving
0..65535
N/A
RNC
Dynamic Load
Energy Saving
0..65535, Step 1
RNC
Connection
Management
0: Off
1: On
N/A
RNC
Admission Control
0..65535, Step 1
times
RNC
Admission Control
0..65535, Step 1
times
RNC
connection
management
1..500, Step 1
100ms
RNC
Connection
Management
0: Not Supported
1: Supported
N/A

power offset for white list users.
When calculate the initial DL
power for the white list user, this
parameter is an additional power
offset to the initial DL power
This
parameter
indicates
calculating
formula
of normal
whether
Forced Call Drop will be
user.
triggered when the ordinary PS
user number online in
CELL_DCH state is larger than
the threshold when VIP user
exists in the cell.
whether to Notify neighbor cell
that VIP User exists in the cell
Lowest Priority of Neighbor Cell
Notified of VIP Existing when VIP
Exists and Neighbor Cell need to
Parameter
Function:
This
be notified.Only
the neighbor
cell
parameter
indicates
whether
that Measurement Priority is the
white
function
is open
or not.
equal list
or higher
than
this priority
Configuration
will be notified.Rule: it's feature
switch and not adjustable. if the
function is opened, the
performance of common users
may be worse (the service online
maybe dropped and new
ordinary service maybe access
failed)
additional size for uplink SIR
target increasing when
consecutive error TB occurs. If
the last two error TBs is
consecutive when SIR target will
be increased, the SIR target
increase step size will add this
This
parameter
indicates the
additional
step size.
valid time window for TB in the
shield period. In this time window
after the shield period of SIR
target increasing, if the SIR
target is increased again, the
SIR target increase step size will
add an additional step size. This
additional step size is calculted
according
to theindicates
error TB when
number
This parameter
in
and
out
the
shield
period
for
board power off, the wait timer
SIR
target
increasing.
for waiting the RRC release or
DSCR by one step.
RNC
VIP QoS Guarantee -50..50, step 0.1
dB
RNC
VIP QoS Guarantee
0: Off
1: On
N/A
RNC
VIP QoS Guarantee
0: Off
1: On
N/A
RNC
VIP QoS Guarantee 0..2
RNC
VIP QoS Guarantee
0: Off
1: On
N/A
RNC
Power Control
0..1, step 0.1
dB
RNC
Power Control
0..65535, step 1
10ms
RNC
handover control
0..65535, Step 1
Maximum Call Capacity
RNC
N/A
0..65535, Step: 1
KErl
Maximum Data Process

Capacity
RNC
N/A
0..65535, Step: 1
Mbyte/s
N/A
This parameter indicates Load

RNC and
Balance in MSC Pool for CORBA
PLMN
interface
Parameter
0..100, Step 1
This parameter indicates Load

Balance in SGSN Pool for
CORBA interface
Parameter
0..100, Step 1
When VipSpecFreqSwch is true,

RNC will balance VIP users to
VIP carrier frequency. Non-VIP
RNC
user will be balanced to Non-VIP
carrier frequency in case of high
load.
Load Balance
0: Off
1: On
N/A

downlink carrier central
frequency of CS VIP.
RNC
Load Balance
0..16383
N/A
This parameter indicates switch

of forced handover strategy for
VIP carrier frequency.
RNC
Congestion Control
0: Off
1: On
N/A

Load Balance Fail in RAB
SEUTP procedure.
RNC
Load Balance
0: Off
1: On
N/A

downlink carrier central
frequency of PS VIP.
RNC
Load Balance
0..16383
N/A
RNC
Connection
Management
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
Rnc
ZTE UMTS User

Equipment Fault
Aversion FG
0: Off
1: On
N/A
The switch of response the LTE

Son Transfer request.
RNC
Handover Control
0: Off
1: On
N/A
The period of RNC starting the

SON Transfer.
RNC
Handover Control
0..65535, Step 1

whether the RNC Send RL
SETUP and ACTIVE SET
UPDATE parallelly when Soft
Specifies
the function switch of
Add Handover.
whether RNC should execute
DSCR procedure when
transferring unsuccessfully from
common connected RRC status
to dedicated connected RRC
status with UE returning
configuration related failure
cause.
The parameter is the switch of
IMEI blacklist.
RNC and
PLMN
Son Transfer Request Number

Threshold in one second
RNC
Handover Control
0..65535, Step 1
times
Response the Son Transfer

message Number Threshold in
one second
RNC
Handover Control
0..65535, Step 1
times
This parameter indicates if

consider the target cell load
Information during the inter
system handover procedure..
RNC and
PLMN
Handover Control
0: Not Supported
1: Supported
N/A

number of setup cells in one
period.
RNC
CPU Loadctrl
V3: 0..200, Step 1

times
V4: 0..400, Step 1

number of cells updating SIB3
when Iu overloads or is not
accessible.
RNC
Connection
Management
1..65535
N/A
RNC
Connection
Management
1..65535, Step 1
RNC
Connection
Management
1..65535
N/A
RNC
Connection
Management
1..65535, Step 1
RNC
0: Separate Iub/Iur
Transport Bearer
HSPA EVOLUTION Mode
N/A
1: UL Flow
Multiplexing Mode
RNC
VIP QoS Guarantee 0..65535, Step 1
kbps
RNC
NodeB
Management
0: Off
1: On
N/A
RNC
Admission Control
0: Off
1: On
N/A

time interval updating SIB3
among cells when Iu overloads
or is not accessible.
number of cells updating SIB3
when Iu is changed from
overloads to unoverload or from
not accessible to accessible and
whenparameter
the DSARindicate
switch isthe
This
changed
.
multi-cell
E-DCH
transportthe
bearer
mode.
time interval updating SIB3
For
multi-cell
E-DCH
Transport
among
cells when
Iu overloads
Bearer
is "Separate
Iub
or is notMode
accessible
and when
Transport
Mode"
or
the DSAR Bearer
switch is
changed.
"Separate Iur Transport Bearer
Mode", the Mac-d flows from
each carrier uses different Iub or
Iur transport bearers.
For multi-cell E-DCH Transport
Bearer Mode is "UL Flow
Multiplexing Mode", the Mac-d
flows
received
on the
different
Downlink
Reserved
Bandwidth
carriers
in
the
Node
B
for VIP UE's I/B Traffic is
multiplexed on one Iub or Iur
transport
bearerindicates
(per Mac-d
The
parameter
the
flow).
switch of filtering the incomplete
neighboring cells in SIB.If the
value of the parameter is 1 (On),
RNC will filter the neighboring
cells configured incompletely in
SIB
This.parameter indicates the
Admission Control Switch for
High Priority Traffic when E-DCH
User Number Resource
Congestion in CELL_DCH State

inter handover method is
periodical method or event
method.
RNC
Handover Control
0: Periodical
Method
1: Event Method

inter-RAT handover method is
periodical method or event
method.
RNC
Handover Control
Switch of Fast Reconfiguration

Function for Relocating into
DRNC
RNC
Node B
Management
0: Off
1: On
N/A

switch of EMI function in CDTCR
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
VIP QoS Guarantee
0: Off
1: On
N/A
Handover Control
0: False
1: True
N/A
Parameter
1..60, Step 1
Location service
1..16
N/A
Admission Control
100..14400, step
100
bps
Handover Control
0: Off
1: On
N/A

whether the RNC fasten
RNC
releasing service when the RNC
receive UCIU ERROR.
Connection
0: Off
Management
1: On
Feature Description
N/A

whether the RNC fasten
RNC
releasing service when the RNC
receive RL FAILURE.
Connection
0: Off
Management
1: On
Feature Description
N/A
When inter-rat measurement is

initialized,
if intra-frequency
This parameter
indicates the
handover
is triggered,
inter-rat
Switch of VIP
User State
RNC
measurement
will be
Transfer
update/modify. due to the
transmission delay of radio
interface, RNC may receive UE
reports based on original inter-rat
RNC
measurement configuration.
RatCelInfoSwch is introduced to
controll the strategy. If the
RatCelInfoSwch
is 1, the the
measurement
report
based
Timer that RNC receives
theon
RNC
original
inter-rat
measurement
Paging Type1 Message
configuration
will be handled to
Respons.
improve handover timeliness.
Maximum Satellite Number in
RNC
Position
measurement
Control
This parameter
indicates
the
Message tolerable data rate
minimum
threshold for new traffic
accessing the FACH. If the data
rate of each service on the FACH
RNC
is lower than the value indicated
by this parameter because of
overload on FACH, new traffic
will be refused to access the
Switch
FACH. of Permit PS Handover
from LTE to UTRAN Because of RNC
CSFB
0: Periodical
Method
1: Event Method
N/A
N/A

whether RNC dicard redirection
LU-Reject/Attach-Rej when the
link of subsequent Iu is break
whether the RNC switch on the
DSAR function. If the RNC
switch on the function, the cell
may restrict some access class
of UE to access the CS/PS
services.
whether switching off the cell
smartly is supported.
This parameter indicates the Rnc
switch for handover based on
uplink Bler. When the switch is
"Off", the function is turned off;
when the switch is "On", judge
This
parameter
indicates the Rnc
the cell
switch UlBlerHoSwch
to
switch
handover
based on
decide for
whether
the function
is
transmit
power. When the switch
turned on.
is "Off", the function is turned off;
when the switch is "On", judge
the cell switch
UlPwrHoSwch/DlPwrHoSwch to
decide whether the function is
This
parameter
indicates the how
turned
on.
long time to admit all UEs when
the sscop
link congestion
The
parameter
indicates license
disappeared
which
to control several
enhanced
handover
features
This parameter
indicates
the as
follows:
IMEI based power control
1
When RNC
is When
waitingthis switch
function
switch.
reconfiguration
complete
is on, some power control
message
from
RNC
parameters
canUE,
be ifconfigured
receives
ACK of AM RLC,
based onthe
IMEI.
then RNC consider the UU
procedure completed.
2 When the signal quality of
current used frequency is bad,
whether intra-frequency
handover will be performed.
3 When the signal quality of
current
used frequency
is bad,
Global Reserved
Parameter
1
whether HSPA serving cell
change will be performed.
RNC
Connection
Management
0: Discard
1: No Discard
N/A
RNC
Connection
Management
0: Off
1: On
N/A
RNC
Intelligent Carrier
Power Control
0: Off
1: On
N/A
RNC
Handover Control
0: Off
1: On
N/A
RNC
Handover Control
0: Off
1: On
N/A
RNC
Admission Control
0..600, Step 1
Rnc
Power Control
0: Off
1: On
N/A
RNC
Handover Control
0: Off
1: On
N/A
RNC
parameter for future

0..255
use
N/A
Global Reserved Parameter 2
RNC

0..255
use
N/A
RNC

0..255
use
N/A
RNC

0..255
use
N/A
RNC

0..255
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..4294967295
use
N/A
RNC

0..4294967295
use
N/A
RNC

0..4294967295
use
N/A
RNC

0..4294967295
use
N/A
RNC

0..4294967295
use
N/A
RNC

0..255
use
N/A
RNC

0..255
use
N/A
RNC

0..255
use
N/A

Bit0, Bit1: Switch of HSUPA TTI
Configuration Method for VIP
User. 0: off; 1: 2ms E-TTI is
initially allocated, and 2ms/10ms
TTI transfer is allowed; 2: 2ms EGlobal
Reserved
Parameter
TTI is fixed
allocated,
and 45
2ms/10ms TTI transfer isn't
allowed
Bit2: 0/1: Switch of SRB
Transport Channel Configuration
Global
Parameter
46
MethodReserved
for VIP User.
0: Off; 1:
On
bit3:
bit11:0/1:
0/1 the function switch of
"CE
access
control
down
to the
0: not to judge
whether
ack
NODEB".
0: close
exists in RLC
whenthe
PSfunction;
state
1:
open the
function. or PS 0/0
transfer
to PCH/IDLE
bit4:
0/1:tothe
function
switch
1: need
judge
whether
ackof
"Count
according
tostate
the
exists inCE
RLC
when PS
NODEB
real
cost". 0: close
transfer to
PCH/IDLE
or PS the
0/0
function; 1: open the function.
bit8: 0/1: Indicator for the
Channel Selection Strategy of
UE's Switching from PCH to
Other Channel. 0: preferred to
Cell_DCH 1: preferred to
Cell_FACH.
Bit11: 0/1: The occasion of return
Relocation Detect message to cn
in soft handover relocation.0:
RNC

0..255
use
N/A
RNC

0..255
use
N/A
RNC

0..65535
use
N/A
RNC
HSPA Evolution
0..65535
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A

RNC

0..65535
use
N/A

0..65535
use
N/A

0..65535
use
N/A
bit0=0/1: Not allow R5 UE to

PCH /Allow R5 UE to PCH
bit1=0/1: Release the traffic
RNC
volume measurement before
switching to PCH/ Note release
the traffic volume measurement
before switching to PCH
the ageing time of DMP, Unit:
Minutes; if the value is less than RNC
1, the value is as 1
RNC

0..65535
use
N/A
RNC

0..65535
use
N/A
RNC

0..8388607
use
N/A
RNC

0..8388607
use
N/A
RNC

0..8388607
use
N/A
RNC

0..8388607
use
N/A
RNC

0..8388607
use
N/A

extended Information of RNC
object ID.
switch of CQI feedback cycle
and CQI repetition factor
adjustment based on load. If the
switch is on, the CQI feedback
cycle and CQI repetition factor is
configured based on uplink load
and
userindicates
number.the
This HSDPA
parameter
DCH 27.2kbps Rate whether to
be used for VIP user's initial
RRC Connection Setup.
switch of the RRC connection
access strategy for bad
coverage.If the parameter is
"On", RRC connection will be
setup on DCH with the rate of
3.4kbps for bad coverage.
indicate whether to decrease the
AMR initial data rate in bad
coverage.
This parameter indicates RNC
This
parameter
indicates
E-DCH
support
filling SAI
corresponding
Throughput
Measurement
Event
to at least one
of the cells from
4B
Counter
Threshold
for the
which
the UE
is consuming
radio
HS-DSCH/E-DCH
to HSresources.
DSCH/DCH Channel
Switching.When the system
receives consecutive
EToD4BtimesThr throughput
measurement
(Event
This
parameterreports
indicates
the 4B)
on
the for
E-DCH
switch
ARPfrom the user
plane,
and Event 6A isPriority)
reported
(Allocation/Retention
by
UE,
the
UE
will
be
switched
based BLER function. When the
form
to HSswitchHS-DSCH/E-DCH
is on, users with different
DSCH/DCH.
ARP have different service target
This
parameter
the
BLER,
it means indicates
have different
default
ARP
power control parameters.
(Allocation/Retention Priority)
segment. When the function
switch for ARP based BLER is
off, get the power control
parameters based on this default
ARP segment. The ARP
segment contains golden, silver
and bronze. The order of priority:
golden > silver > bronze.
ARP (Allocation/Retention
Priority) threshold of golden
priority subscriber used in power
control. ARP of the golden
priority subscriber is not bigger
than this threshold.
RNC
Parameter
0..2147483647,
Step 1
N/A
RNC
Power Control
0: Off
1: On
N/A
RNC
VIP
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Not Supported
1: Supported
N/A
UTRAN Cell
AMR-NB & AMRWB
0: Off
1: On
N/A
RNC
Connection
Management
0: False
1: True
N/A
RNC
Dynamic Radio
Bearer Control
1..65535
N/A
RNC
Power Control
0: Off
1: On
N/A
RNC
Power Control
0: Golden;
1: Silver;
2: Bronze
N/A
RNC
Power Control
1..15
N/A

ARP (Allocation/Retention
Priority) threshold of bronze
priority subscriber used in power
control. ARP of the bronze
subscriber
is bigger
than this
This
parameter
indicates
the
threshold.
And the silver
load filter coefficient.
It ispriority
used in
subscriber
defined
as this ARP
uplink RoT is
and
downlink
not
bigger
than
the
ARP
effective load filter.
threshold
of bronze
The filter formula
aspriority
following:
subscriber,
and
bigger
than
the
F (n) parameter
= (1-a)*F (n-1)+a*M
(n);
This
indicates
the
ARP threshold of golden priority
Where,
user
number filter coefficient. It is
subscriber.
F
(n) is
filtered
used
in the
the updated
uplink equivalent
result;
user number filter.
F
(n-1)
is formula
the last filtered
result;
The
filter
as following:
M
(n)
is
the
new
load
F (n) = (1-a)*F (n-1)+a*M (n);
measurement result;
Where,
a
loadupdated
filter coefficient.
F is
(n)the
is the
filtered
result;
This
parameter
the SIR
F (n-1)
is the lastindicates
filtered result;
target
rapid
convergence
switch.
M (n) is the new equivalent
user
When
this
switch
is
on,
the
number statistical result; SIR
target
befilter
decreased
rapidly
a is thecan
load
coefficient.
to the SIR target based on
BLER.
RNC
Power Control
1..15
N/A
RNC
Power Control
0..1, step 0.01
N/A
RNC
Power Control
0..1, step 0.01
N/A
RNC
Power Control
0: Off
1: On
N/A

uplink BER OLPC algorithm
switch
RNC
Power Control
0: Off
1: On
N/A

shield period switch
RNC
Power Control
0: Off
1: On
N/A

BER filter coefficient.
RNC
Power Control
0..1, step 0.01
N/A

normal outer loop power control
algorithm is used. There are two
kinds of normal outer loop power RNC
control algorithm: BLER Target
Algorithmic and Threshold
Algorithmic.
Power Control
0: BLER Target
Algorithm
1: Threshold
Algorithm
N/A

time window size of opening
shield period
RNC
Power Control
0..2000, Step 1
ms

threshold of opening shield
period
RNC
Power Control
0.1..10, step 0.1
dB

shield period
Power Control
0..2000, Step 1
ms
Switch of RXLEV-NECELL
indication in oldBSS_ToNewBSS
RNC
when inter-system handover to
GSM.
Handover Control
0: Off
1: On
N/A
If cell has multi-plmn, RNC

modify the PLMN of NAS
message sent to UE to
COMMON PLMN or not
RNC
RAN Sharing
0: Don't Modify
1: Modify
N/A
Fill Cn Information IE in Uu
Message or Not
RNC
RAN Sharing
0: Don't Fill
1: Fill
N/A
RNC
Handover Control
0: PS Handover
1: Redirection
N/A
RNC
Handover Control
1..255, step 1
RNC
VIP QoS Guarantee
0: Off
1: On
N/A
RNC
Connection
Management
0: Off
1: On
N/A
RNC
Connection
Management
1..255, Step 1
100ms
UTRAN Cell
Related
Parameter
0..2147483647
N/A
UTRAN Cell
Handover
Control
/MULTIPLMN
1..0xfffd, 0xffff
N/A
RNC
Parameter
0..2147483647
N/A

mode of PS handover from
UTRAN
to Eutran.
PS handover
This parameter
indicates
timer of
or
redirection
can
be
adopted
deactivate compressed
mode for
based
on UEtocapability.
Fast
Return
Eutran.If
compressed mode is initialized
due
fast return
to Eutran, the
This to
parameter
indicates
timer
activates.
When
theDCH
timer
whether using Faster L1
expired,
if
event
(3C)
doesn't
synchronization for VIP user.
report, L1
RNC
willsynchronization
judge whether
Faster
DCH
compressed
mode
is deactivate
function means:
In DCH
or
not
based
on
current
signal
synchronization procedure,
If the
quality.
RNC indicate the usage of a
post-verification period the UE
shall start transmission on uplink
immediately when the physical
dedicated channel establishment
is
initiatedthe
by switch
the UE,ofwhich
Specifies
CS can
faster
the
DCH
synchronization.
paging resend in PCH status.
Specifies the timer length of CS

paging resend in PCH status.

Object
ID
This parameter
indicates the
LAC of the cell. It is used to
determine the location of the MS.
The coverage area of each
PLMN is divided into many
location areas. LAC is used to
identify different location area.
LAC belongs to LAI (LAI = MCC
+ MNC + LAC). One location
area
includes many
cells.Routing
This parameter
indicates
Area Configuration Object ID
RNC

routing area code of the cell. It is
only valid when supporting PS
services. The routing area code
identifies one routing area in
PLMN of GSM-MAP type, for
packet services. RAC belongs to
RAI (RAI = PLMN-ID + LAC +
RAC).
RAC is set
by the operator
This parameter
indicates
the CS
via
RNC
O&M.
+
PS
domain
service
areaService
code.
Service
area
code
uniquely
identifies one or several cells
belonging to the same Location
Are (LA). Service area code
indicates the UE
location
CN.
Indicates
service
areafor
code
SAC
belongs
SAIcell
(SAI
for BC
domaintothe
is =
PLMN-ID + LAC
+ SAC). to
SAC
referenced.
It is required
be is
set by the operator
RNC
configured
when thevia
cell
O&M. One
cell
may
belong to
supports
the
cell
broadcast
one or two
SACs: One
service.
Otherwise,
thisis CS +
Service
Area
Configuration
PS domain
and the other
is
parameter
isSAC
not
required
toinbeBC
Domain
Object
ID
BC
domain
SAC.
One
of
them
configured.
must be indicates
CS + PS the
domain
SAC.
SACBC
BC domain
service area code of the cell.
Service area code is uniquely
identifies one or several cells in
the same Location Area (LA).
Service area code is to indicate
This
parameter
the
the UE
location indicates
to CN. SAC
number
of
GSM
BCCH
belongs to SAI (SAI = PLMN-ID
distribution
tables.
When
+
LACRNC
+ SAC).
SAC
is setUTRAN
by the
Logic
Configuration
Object
network
and
BSS
network
operator
via
RNC
O&M.
One
cell
ID
belong
toone
the or
same
PLMN
at the
contains
two
SAC:
One
is
This
parameter
indicates
same
timedomain
and UE
hasandthe
CS
+
PS
SAC
the
frequency
lower
range
of a
transferred
from
RRC connected
other
is BC
domain
One of
specific
GSM
BCCHSAC.
distribution
mode
to
Idle
mode,
UE
will
them
must
be
CS
+
PS
domain
table
that
thecell
local
PLMN
selects
one
to reside.
SAC.
SA
of BC
domain
can
only
controls.
When
UTRAN
network
UTRAN
contains
this parameter
contain
one
cell.
and
network
to the
in theBSS
message
of belong
RRC The
This
parameter
indicates
same
PLMN
at
the
same
CONNECTION
RELEASE,
frequency upper range of time
a
and
UE has
from
indicating
thetransferred
possible
BCCH
specific
GSM
BCCH distribution
RRC
connected
mode
to Idle
frequency
range
of PLMN
neighboring
table
that the
local
mode,
UEWhen
will
selects
cell to
GSM cells
of the
BSS one
network.
controls.
UTRAN
network
reside.
UTRAN
contains
this
This BSS
parameter
helps
UE to the
and
network
belong
parameter
in at
the
message
of
speedPLMN
up the
process
of cell
same
the
same
time
RRC
CONNECTION
RELEASE,
searching.
and
UE
has transferred
from
This
parameter
indicates
the
indicating
the possible
BCCH
RRC connected
mode
to Idle
number
of
UTRAN
FDD
frequency
range
of
neighboring
mode,
UE range
will selects
one cell
frequency
controlled
by to
GSM
cells
of thecontains
BSS network.
reside.
UTRAN
this
the
local
PLMN.helps UE to
This
parameter
parameter
in the message
of
When
UE
comes
backoftocell
idle
speed
up the
process
RRC
CONNECTION
RELEASE,
mode
from RRCindicates
connected
This
parameter
the
searching.
indicating
possible
BCCH
mode, UE the
selects
one cell
frequency
lower
range
of ato
frequency
range
of
neighboring
reside.
UTRAN
contains
this
specific
UTRAN
GSM
cells
of
theFDD
BSS frequency
network.
parameter
in
the
message
of
that
the
local PLMN
This
parameter
helpscontrols.
UE to
RRC
CONNECTION
RELEASE,
When
UE
state
is transferred
speed
up the
process
of
cell
indicating
the
possiblemode
frequency
from
RRC
connected
This
parameter
indicates
theto
searching.
range
in UTRAN
cells. one
This
idle
mode,
UE selects
to
frequency
upper
range
of
acellup
parameter
helpscontains
UE to speed
reside.
UTRAN
this
specific
UTRAN
FDD
that the
the
process
ofthe
cell
searching.
parameter
message
local PLMNincontrols.
WhenofUE
RRC
RELEASE,
state CONNECTION
is transferred from
RRC
indicating
the
possible
connected mode to idle mode,
transmission
frequency
range of
UE
selects one
cell to reside.
the
UTRAN
cells. this
Thisparameter
parameter
UTRAN
contains
helps
to speed
up the
in the UE
message
of RRC
process
of
cell
searching.
CONNECTION RELEASE,
indicating the possible
transmission frequency range of
the UTRAN cells. This parameter
helps UE to speed up the
process of cell searching.
UTRAN Cell
MULTIPLMN
0..255
N/A
RNC
Parameter
0..2147483647
N/A
RNC
Parameter
0..65535
N/A
RNC
Parameter
0..2147483647
N/A
RNC
CBS
0..65535
N/A
RNC
Parameter
0..2147483647
N/A
RNC and
PLMN
Connection
Management
0..32
N/A
RNC and
PLMN
Connection
Management
0..1023
N/A
RNC and
PLMN
Connection
Management
0..1023
N/A
RNC and
PLMN
Connection
Management
RNC and
PLMN
Connection
Management
RNC and
PLMN
Connection
Management
10562..10838,
9662..9938, 412,
437,
0..32462, 487,
N/A
512, 537, 562,
587, 612, 637,
662,
687,
10562..10838,
1162..1513,
9662..9938, 412,
1537..1738,
1887,
437, 462, 487,
N/A
1912,
1937,
1962,
512, 537, 562,
1987,612,
2012,
2037,
587,
637,
2062,
2087,
662, 687,
4357..4458,
1162..1513, 1007,
1012,
1032, 1037,
1537..1738,
1887,
N/A
1062,
1912, 1087,
1937, 1962,
4387..4413,
1987, 2012, 1037,
2037,
1062, 2087,
2937..3088
2062,
4357..4458, 1007,
1012, 1032, 1037,
1062, 1087,
4387..4413, 1037,
1062, 2937..3088

RNC and
whether AMR rate adjustment is
PLMN
supported in the RNC.
whether the QoS negotiation
during RAB establishment or
relocation and the QoS
RNC
renegotiation during the
conversation after the service is
established are permitted by the
RNC.
RNC and
Specifies the MR function switch.
PLMN
0: Switch Off QoS

Negotiation,
AMR-NB & AMR0:
Off Off QoS
Switch
WB/Admission
N/A
1:
On
Renegotiation
Control
1: Switch Off QoS
Negotiation,
Switch On QoS
Services and Radio Renegotiation
N/A
Access Bearers
2: Switch On QoS
Negotiation,
Switch Off QoS
Renegotiation
On QoS
RAN Performance 3:
0: Switch
Off
N/A
Negotiation,
Monitor
1: On
Switch On QoS
Renegotiation

whether the integrity protection
algorithm UIA1 is supported.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A

whether the integrity protection
algorithm UIA2 is supported.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A

encryption algorithm 0 that the
RNC supports.
RNC
Connection
Management
0: Not Supported
1: Supported
N/A

RNC supports.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A

RNC supports.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A

whether AMR 4.75 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
whether AMR 5. 90 kbps is used
PLMN
or not.
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

or not.
AMR-NB & AMRWB
0: Not Used
1: Used
N/A
RNC and
PLMN

or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

whether wideband AMR 6.60
kbps is used or not.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A

maximum time that the RNC may
store Permanent NAS UE
Identity IE (and the related
Global CN-ID IE) when NNSF is
active.
lower limit of guaranteed bit rate
used for QoS
negotiation/renegotiation for
uplink services.
lower limit of guaranteed bit rate
used for QoS
negotiation/renegotiation for
Downlink services
level number of the negotiated
guaranteed bit rate. This
parameter is shared by uplink
and downlink.
RNC and
PLMN
AMR-NB & AMRWB
0: Not Used
1: Used
N/A
RNC and
PLMN
Iu Flex
1..255, Step 1
RNC
RNC
RNC
8, 16, 32, 64, 128,

144, 256, 384,
Services and Radio 512, 711, 1024,
8,
16, 32,
64,2048,
128, kbps
Access Bearers
1399,
1448,
144,
384,
2886,256,
3072,
4096,
512,
900,
5760,768,
11520
1024, 1200, 1800,
2048, 3650, 4096,
Services and Radio
6144, 7200, 8192, kbps
Access Bearers
8640, 10100,
14000, 17600,
21096, 23370,
27952, 35280,
Services and Radio 42192
1..17
N/A
Access Bearers
Specifies the CDT function

switch.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
Specifies the IMEI acquisition

switch in the CDT function.
whether the function of radio link
timing adjusting is used: if the
value is "Off" , the UE internal
Measurement (Event 6G/6F)
used to trigger radio link timing
adjusting will not be setup; else
the
Measurement
(Event
6G/6F)
When
handover from
UMTS
to
will
be
setup
GSM is failed, the timer is
initialization, and RNC will not
handle inter-Rat measurement
report
until the timer
is expiry.
This parameter
indicates
whether inter-frequency and
inter-rat compressed mode will
be configured to UE
simultaneously or not, when
inter-frequency cells and inter-rat
neighboring cells exist.
The parameter indicates whether
RNC support PS handover with
LTE.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
RNC
Handover Control
0: Off
1: On
N/A
RNC
Handover Control
RNC
handover control
RNC
Handover Control

RNC
RNC support SRVCC.
Handover Control
0..65535,
step
1
s
0: Configure
InterFrequency and
Inter-Rat
compressed mode
simultaneously
1: Configure Inter- N/A
Frequency and
Inter-Rat
compressed mode
individually
0: Off
N/A
1: On
0: Off
1: On
N/A

Initial AMR data rate when cell
load is high. When the cell
effective downlink load is larger
than AmrDlLdThrd or the cell
effective
uplink load
is larger
This parameter
indicates
the
than AmrUlLdThrd,
newcell
Initial
AMR data ratethe
when
Narrow-Band
AMR the
will cell
be setup
load is high. When
with
the
discounting
data
of
effective downlink load is rate
larger
NAmrInitialRate
than AmrDlLdThrd or the cell
effective uplink load is larger
than AmrUlLdThrd, the new
Wide-Band
AMRindicates
will be setup
This parameter
the
with
the
discounting
rate of
value 'null-NRI' of CSdata
Domain,
WAmrInitialRate
when RNC receives a message
with null-NRI, the NAS Node
Selection Function shall be used
for
a CN
node. the
Thisselecting
parameter
indicates
value 'null-NRI' of PS Domain,
when RNC receives a message
with null-NRI, the NAS Node
Selection Function shall be used
for
a CN
node. the
Thisselecting
parameter
indicates
Traffic Handling Priority (THP)
segment threshold. The THP will
be mapped by RNC to different
THP segment upon this
parameter.
RNC and
PLMN
AMR-NB & AMRWB
RNC and
PLMN
AMR-NB & AMRWB
RNC and
PLMN
Iu Flex
0: 4.75kbps
1: 5.15kbps
2: 5.90kbps
3: 6.70kbps
4: 7.40kbps
0:
5: 6.60kbps
7.95kbps
1:
6: 8.85kbps
10.2kbps
2:
7: 12.65kbps
12.2kbps
3: 14.25kbps
4: 15.85kbps
5: 18.25kbps
6: 19.85kbps
7: 23.05kbps
8: 23.85kbps
0..1023, 0XFFFF
RNC and
PLMN
Iu Flex
0..1023, 0XFFFF
N/A
RNC
QoS Guarantee
1..15
N/A
kbps
kbps
N/A

RNC and
number of uplink rate adjustment
PLMN
levels.
QoS
Guarantee/Dynamic
1..6
Radio Bearer
Control

uplink rate adjustment levels
used by DRBC. The uplink rate
adjustment range is limited by
this parameter.
MAX_NUM_RATE_ADJUST=6.
RNC and
PLMN
QoS
Guarantee/Dynamic 8, 16, 32, 64, 128,
kbps
Radio Bearer
144, 256, 384
Control

number of downlink rate
adjustment levels.
RNC and
PLMN
QoS
Guarantee/Dynamic
1..6
Radio Bearer
Control

downlink rate adjustment levels
used by DRBC. The downlink
rate adjustment range is limited
by this parameter.
MAX_NUM_RATE_ADJUST=6.
RNC and
PLMN
QoS
Guarantee/Dynamic 8, 16, 32, 64, 128,
kbps
Radio Bearer
144, 256, 384
Control

RNC and
Drbc strategy configuration index
PLMN
for not DPI scene.
whether CS voice over HSPA is
supported or not. If it is "On", CS RNC
voice over HSPA is allowed,
otherwise not allowed.
This parameter is a switch which
indicates whether the dynamic
radio bearer control algorithm is RNC
supported for the uplink and
downlink services.
Dynamic Radio
Bearer Control
CS over HSPA
Dynamic Radio
Bearer Control
N/A
N/A
N/A
N/A
0: Off
N/A
1: On
0: Switch Off in UL
& Switch Off in DL
1: Switch Off in UL
& Switch On in DL
2: Switch On in UL N/A
& Switch Off in DL
3: Switch On in UL
& Switch On in DL
parameter is set to "On" , the

function of E-TTI switching
triggered by user plane
throughput measurement is
valid, and for the I/B service in
the commercial network, the 2ms
E-TTI UE can use 10ms E-TTI
initially and be switched to 2ms
afterwards by throughput
This
parameterWhen
indicates
measurement.
it is set
whether
DL
DCH
adjustment
"Off", the functionrate
of E-TTI
for
PS
services
based
on D-TCP
switching triggered by user
plane
measurement
is
supported.
throughput measurement is If
this
switch
"Off",
it is invalidtofor
invalid
and is
RNC
determines
DCH
rateor
adjustment
based to
on
use 2ms
10ms
according
This
parameter
indicates
D-TCP
measurement;
otherwise,
UE capability,
E-TTI
whether
UL DCH
rate adjustment
valid.
configuration
of based
the service
in the
for
PS services
on UE
OMC-R
etc.
when
the
service
transmission
power
is
supported.
This parameter indicates the is
setup
initially.
If
this switch
is "Off",bit
it is
invalid
downlink
maximum
rate
for DCH rate
adjustment
based
threshold
for I/B
service being
on
UE transmission
power;
established
on CELL_FACH.
otherwise,
valid.
When interactive/background
service is set up initially, if
downlink maximum bit rate is
This
indicates allocate
that
lowerparameter
than the threshold,
when
FACHinteractive/background
for the service, otherwise,
service
set up initially, if the
allocateisHS-DSCH/EDCH,
HSuplink
maximum
bit rate is lower
DSCH/DCH
or DCH/DCH
than
the threshold,
allocate
according
to UE capability.
RACH for the service, otherwise,
This
parameter
indicates HSallocate
HS-DSCH/EDCH,
whether
DCH
rate
adjustment
DSCH/DCH or DCH/DCH
based
on
traffic
volume
according to UE capability.
measurement
supported. If
This parameterisindicates
this
switch
is
"Off",
is invalid
whether transferringit from
HS- for
DCH rate
adjustment
based on
DSCH
to DCH
for interactive/
traffic
volumeservice
measurement;
background
based on
otherwise,
valid.
event 1F is allowed. If this switch
is "On" and the uplink transport
This
parameter
indicates
channel
is E-DCH,
interactive/
whether
transferring
from
HSbackground service will
transfer
This
indicates
DSCH
to DCH
for
streaming
from parameter
HSPA
including
HS- the
conversational
traffic
rate
service
based on
event
1F is
DSCH /E-DCH
and
HSthreshold
used
for
determining
allowed.
If this
is "On"
and
DSCH/DCH
to switch
DCH /DCH
based
I/B
PS
traffic
rate upper
limit is Ethe
uplink
transport
channel
on event
1F.
when
are will
DCH, Multi-RABs
streaming service
conversational
(CS or
PS) +HStransfer from HSPA
include
This
parameter
indicates
streaming/interactive/background
DSCH /E-DCH and HS- the I/B
PS
uplink
rate
limit
PS
and channel
type/DCH
is when
DSCH/DCH
to upper
DCH
based
Multi-RABs
DCH/DCH+DCH/DCH.
If the rate
on event 1F.are conversational
(CS
orCPS)
+
of the
service
is not greater
than this threshold, "NRT PS
PS
the rate
of the
Traffic
Rate
Upper
Limit When
Thisand
parameter
indicates
the I/B
conversational
service
low, in
Low
Rate
C
Traffic+
PSislimit
Traffic"
PS downlink rate upper
which
case,for
the
sum
the
is adopted
PS
rateofupper
when
Multi-RABs
are
uplink
rates of all
theorI/B
PS
limit; "otherwise
NRT
PS
Traffic
conversational
(CS
PS)
+
services
cannot
exceed
this
Rate Upper Limit When High
threshold.
the rateisof
Rate
C Traffic+
Traffic"
PS
and
theWhether
ratePS
of the
This
parameter
indicates
the
the
conversational
service
is I/B
adopted.
conversational
service
is low,
in
PS
uplink
rate
upper
limit
when
considered
or of
high
which
case,as
thelow
sum
theis
Multi-RABs
are
conversational
determined
according
toI/B
"C PS
downlink
rates
of all the
(CS
or Rate
PS)
+Threshold
Traffic
Used
services
cannot exceed this for
Determining
NRT PS
Rate
threshold.
the
rateUpper
of
PS
and
theWhether
rate of the
Limit"
.
the
conversational
service
is
conversational service is high, in
considered
or of
high
which
case,as
thelow
sum
theis
determined
to PS
"C
uplink rates according
of all the I/B
Traffic
Rate
Threshold
Used
services cannot exceed this for
Determining
NRT PS
Rate
threshold. Whether
the
rateUpper
of
Limit"
.
the conversational service is
considered as low or high is
determined according to "C
Traffic Rate Threshold Used for
Determining NRT PS Rate Upper
Limit" .
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0..65535, step 1
kbps
RNC
Dynamic Radio
Bearer Control
0..65535, step 1
kbps
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
1..384, step 1
kbps
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
PS downlink rate upper limit

when Multi-RABs are
conversational (CS or PS) +
PS
and the
rate
of theon
whether
SRB
beared
conversational
service
is high,
transport channel E-DCH
is in
which case,
theWhen
sum ofminSF
the of
allowed
or not.
downlink
of all the
E-DCH isrates
2sf2+2sf4,
thisI/B PS
services
cannot
exceed
parameter is useless.Forthis
threshold.
Whether
rate
of
SrbOnEdchSwch
is the
"On",
with
the
conversational
service
is
support of F-DPCH from cell and
considered
as beared
low or high
is
UE, signalling
on Edetermined according
to "C
DCH/HS-DSCH,
otherwise
Traffic
Rate
Threshold
Used
This
parameter
indicates
beared
on DCH/E-DCH.
For for
Determining
NRT
PS
Rate
Upper
whether
channel
transferring
for
SrbOnEdchSwch is "Off", on
the
Limit"
.
C
(VoIP/
CS
voice)
service
condition of cell and UE both
based
1F is
allowed. If
supporton
ofevent
F-DPCH
and
this
switch
is
"On",
switching
calculated E-DCH
from
HS-DSCH /E-DCH
or HSMinSF=2sf2+2sf4,
signalling
DSCH/DCH
to DCH/DCH based
beared on HS-DSCH/E-DCH,
on
event
1F for
VoIP /CS
else,
beared
on the
DCH/E-DCH,
voice
serive
is
allowed;
otherwise on DCH/DCHotherwise
3.4k.
not
Thisallowed.
initial rate of UL DCH admission.

initial rate of DL DCH admission.
whether substitute 3.4 kbps
This
parameter
iskbps
usedsignalling
to control
control
signalling
by 6.8is
This
parameter
used
to
PS
service
allocation
during
RRCchannel
connection
setup for
online-already
service
concurrent
CS+PS
. If the
when signalling
is carried
reconfiguration
method
foron
UE of
parameter
is
on,
for
CS
service
DCH or when
has
been
Release
6 andRB
after
Release
6
first
then
PS service
setup
and
signalling
carried
whenand
multi-RAB.
Foristhe
sceneon
triggered
scene,
allocate the
DPCH
alone.
that it needs
to reconfigure
DCH/DCH
for the
PS service;
already
online
service
at the
For
PStime
service
then
same
whenfirst
theand
setup
of CS
service
triggered
scene,
and
new service, if the parameterifis
PS
performit takes
the HSRB
to
set is
to on
"0"HS,
, it means
DCH
reguration.Otherwise,
Setup method, and then both the
allocate
HS-DSCH/EDCH,
HSonline-already
service
DSCH/DCH
or DCH/DCH
for PS
reconfiguration
and new service
service
to UE
setup byaccording
the RADIO
BEARER
capability.
SETUP message in one step; if
the parameter is set to "1" , it
This
parameter
is a switch which
means
it takes RB
indicates
whethermethod,
the dynamic
Reconfiguration
it first
radio
bearer
algorithm
performs
the control
online-already
based
DPI is supported
serviceon
reconfiguration
by .
RADIO BEARER
RECONFIGURATION message,
This
parameter
indicates
the
and then
performs
new service
switch
of
DPI
based
QoS
setup by RADIO BEARER
algorithm.
SETUP message.
whether to release Qchat UE's
non-Qchat-RB2 PS service when
non-Qchat-RB2 PS service is no
traffic volume .
event 4B0 counter threshold for
the release of Qchat UE's nonQchat-RB2 PS service for , when
non-Qchat-RB2 PS service is no
traffic volume .
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
RNC
Dynamic Radio
0: Off
Bearer Control
1: On
/HSUPA Introduction
N/A
RNC
CS over HSPA
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC and
PLMN
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC and
PLMN
Dynamic Radio
Bearer Control
0: RB Setup
Method
1: RB
Reconfiguration
Method
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC and
PLMN
Deep Packet
Inspection
0: Off
1: On
N/A
RNC and
PLMN
Dynamic Radio
Bearer Control
0: False
1: True
N/A
RNC and
PLMN
Dynamic Radio
Bearer Control
1..65535
N/A

whether provide the NACC
(Network Assisted Cell
Change)function.0 indicates not
support, 1 indicates support.
RNC and
PLMN
Handover Control
0: Not Supported
1: Supported
N/A
Handover Control
0: Not Supported
1: Supported
N/A
Handover Control
0: Not Supported
1: Supported
N/A
AMR-NB & AMRWB
0: Not Supported
1: Supported
N/A

supports PS Conversational RAB RNC
for VoIP
VOIP Bearers
0: Not Supported
1: Supported
N/A

supports PS Signalling RAB for RNC
IMS
VOIP Bearers
0: Not Supported
1: Supported
N/A
Handover Control
0: Not Supported
1: Supported
N/A
HSDPA Introduction
0: Not Supported
1: Supported
N/A
RAN Performance
Monitor / Handover
control FD
0: Not Supported
1: Supported
N/A

whether 2SF2+S2SF4 can be
RNC and
used by UE. 1 indicates can use PLMN
2SF2+S2SF4, otherwise can not.
Dynamic Radio
Bearer Control
0: Not Supported
1: Supported
N/A

indicate if the CID LCS method
support.
RNC and
PLMN
Location Service
0: Not Supported
1: Supported
N/A

indicate if the AGPS LCS
method support.
RNC and
PLMN
Location Service
0: Not Supported
1: Supported
N/A

whether provide PS handover to
RNC
Inter-RAT
system.0
indicates not
This parameter
indicates
support, provide
1 indicates
support
whether
DTM
mode, that
is whether provide inter-RAT
handover both for CS domain
services and PS domain services
RNC
at the same time.0 indicates not
support, 1 indicates support.
Only when parameter
PsInterSysHoSupp set to 1, this
parameter
set toindicates
1 is available.
This parameter
if RNC
RNC
supports WB-AMR Speech
This parameter
parameter indicates
indicates if RNC
This
supports
Service-Based
RNC
whether HSDPA
HS-DPCCH
Handover
ACK/NACK enhancement is
supported by RNC. For R6
version and beyond, HARQ
preamble is added when
ACK/NACK is sent in uplink,
RNC
mode 1 means ACK/NACK
enhancement is used, so as to
increase
the reception
accuracy
This parameter
indicates
if RNC
of
ACK/NACK.
Only
when
supports neighbouring cell this
parameter
is set as
'Supported',
monitoring.When
this
parameter RNC
can
mode
1
be
configured.
is 1, rnc will start neighbouring
cell monitoring

support IMSI based handover.
RNC
Handover Control
0: Not Supported
1: Supported
N/A

MBMS PTP Service can be
Beared on HSDPA..
RNC and
PLMN
MBMS
0: Not Supported
1: Supported
N/A

consider the target cell load
Information during the inter
system handover procedure..
RNC
Handover Control
0: Not Supported
1: Supported
N/A

RNC and
supports fast reconfiguration
PLMN
function.
Node B
Management
0: Not Supported
1: Supported
N/A

whether AMR inter-frequency
handover allowed or not
RNC
Handover Control
0: Off
1: On
N/A

whether AMR inter-Rat handover RNC
allowed or not
Handover Control
0: Off
1: On
N/A

whether R99 RT inter-frequency RNC
Handover Control
0: Off
1: On
N/A

whether R99 NRT interfrequency handover allowed or
not
RNC
Handover Control
0: Off
1: On
N/A

whether R99 RT inter-Rat
RNC
Handover Control
0: Off
1: On
N/A

whether R99 NRT inter-Rat
RNC
Handover Control
0: Off
1: On
N/A

whether HSDPA inter-frequency
RNC
Handover Control
0: Off
1: On
N/A

whether HSDPA inter-Rat
RNC
Handover Control
0: Off
1: On
N/A

whether HSUPA inter-frequency
RNC
Handover Control
0: Off
1: On
N/A

whether HSUPA inter-Rat
RNC
Handover Control
0: Off
1: On
N/A

whether R99 RT inter-Rat
RNC
handover to EUTRAN allowed or
not.
Handover Control
0: Off
1: On
N/A

RNC
not.
Handover Control
0: Off
1: On
N/A

whether HSDPA inter-Rat
RNC
not.
Handover Control
0: Off
1: On
N/A
Handover Control
0: Off
1: On
N/A

RNC
not.
whether PO2 can be dynamically
updated or not. PO2 is the power RNC and
offset between the DL DPCH
PLMN
TPC domain and the DPCH data
domain.
0: Off (Not Need

Dynamic Update)
Power Control
1: On (Need
Dynamic
Update)
0:
Not Support
SCUDIF
1: Support
Services and Radio SCUDIF, CS64
Access Bearers FD Service
Established by a
RB
N/A
This parameter is CS 64k RB

mode control switch.
RNC
The parameter is the switch of

dedicated priority.
RNC
Load Balance
0: Off
1: On
N/A
Specifies the NAS call number

acquisition switch in the CDT
function.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
Specifies the NodeB statistic info

RNC and
PLMN
function.
Call Detail Trace
0: Off
1: On
N/A
Specifies the last Iu/Uu signalling

RNC and
PLMN
function.
Call Detail Trace
0: Off
1: On
N/A
N/A
When handover from UMTS to

E-UTRAN is failed, the timer,
which is specific to UE, is
initialization, and RNC will not
RNC
handle E-UTRAN inter-Rat
measurement report reported by
the UE until the timer is expiry.
whether to punish the UE that
RNC
can't camp on PCH state
whether to transfer from
HSDSCH to DCH for R5 UE's
"PS Setup before CS"
Concurrent Service when
CsPlusPsSwch is on.
CDT Record Number Threshold
Per RRC Connection
switch of HS-DSCH/E-DCH or
HS-DSCH/ DCH to DCH/DCH,
used for CS+PS Scene. For
CS+PS Scene, If this parameter
is set to "On" , the PS service will
be switched from HS to DCH
This
the
whenparameter
it have noindicates
data.
event 4B0 counter threshold for
HS-DSCH to DCH, used for
CS+PS scene. For the CS+PS
scene.
DCH rate of PS reconfigured,
used
for CS+PSindicates
scene. the
This parameter
switch of the PS service channel
allocation, used for UE in the
CELL_FACH state triggering CS
This
indicates
that
Call.Ifparameter
the parameter
is on,
when
after
switching
from HS- state
the UE
in the CELL_FACH
DSCH/DCH
or HS-DSCH/E-DCH
trigger CS Call,
the PS service
to
DCH/DCH
triggered
by traffic
will be beard on
DCH with
the
volume,
whether
the
switching
rate of CsPsSceDchRate.
from DCH/DCH to HSDSCH/DCH or HS-DSCH/E-DCH
is allowed.If it is on, only timer
DToHsDelayThr expires, the
switching from DCH/DCH to HSDSCH/DCH
or HS-DSCH/E-DCH
Logical Iur Link
Configuration
can
be
allowed
Object ID

reference to UIurLink object.
Basic Priority Transport Bearer

Type Index
Handover Control
0..65535, step 1
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC and
PLMN
Call Detail Trace
1..255
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
1..255
N/A
RNC
Dynamic Radio
Bearer Control
0, 8, 16, 32, 64,

kbps
128, 144, 256, 384
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
0..2147483647
N/A
RNC
QoS Guarantee
N/A
N/A
RNC
QoS Guarantee
N/A
N/A
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
N/A
N/A
QOS Function Object ID
RNC
Parameter
0..2147483647
N/A
Qos Basic Configuration Object

ID
RNC
Parameter
0..2147483647
N/A
RNC
QoS Guarantee
0..DBS_RR_MAX_
N/A
BP-1
RNC
HSUPA Introduction -50..0, step 0.1
dB
RNC
HSUPA Introduction -83..0, step 1
dB
UTRAN Cell
Load Balance
N/A
RNC
QoS
Guarantee/Congesti
0..384, step 1
on Control/ HSUPA
Introduction
kbps
RNC
QoS
kbps
RNC
HSUPA Introduction 0..65535, step 1
kbps
RNC
HSUPA Introduction 0..65535, step 1
kbps
RNC
Parameter
N/A
Transport layer Qos Profile

parameter mapping Index for
each Iur adjacent NE.

Basic Priority used for Basic
Priority indentification of
parameter related to Basic
Priority,
can not indicates
adjustablethe
This parameter
power offset between the DPCH
maximum downlink power for the
traffic class of different basic
priority. So that users of different
basic
priority may
have different
This parameter
indicates
the
maximum
downlink
power.
power offset between
the DPCH
maximum uplink power for the
This
indicates
the
trafficparameter
class of different
basic
nominal
bit
rate
for
uplink
priority. So that users of different
interactive/background
basic priority may have services
different
on
DCH.
Ituplink
is mapped
from
This
parameter
indicates
thethe
maximum
power.
Basic
Priority
, higher
basic
equivalent
HSPA
users.
priority
traffic
has
nominal
Where
MAX_BP
ishigher
the maximum
This
parameter
indicates
the
bit
rate.
DRBC
scheduling
need
number of
Priority,
nominal
bitthe
rateBasic
for downlink
sort
order
of
online
service,
The
which equals to 16.
services
services
with
a
current
rate
on DCH. It is mapped from the
smaller
than the
NBRbasic
are put
Basic Priority,
higher
into thetraffic
foremost
(set1),
the
priority
has set
higher
nominal
services
with a scheduling
current rateneed
equal
bit rate. DRBC
to
the
NBRofare
put into
set2,The
and
sort
order
online
service,
the
services
with
a
current
rate
services with a current rate
larger
smallerthan
thanthe
theNBR
NBRare
areput
putinto
the
last
set
(set3).
Then
the
into the foremost set (set1), the
services
in
each
set arerate
sorted
This
parameter
indicates
theequal
services
with
a current
according
to
their
scheduling
nominal
bit rate
for into set2, and
to the NBR
are put
priorities
(SP).
The
service
services
the services
with
a current
rate
ranking
foremost
will
be
on
HS-DSCH.
It
is
mapped
larger than the NBR are putfrom
into
scheduled
first.
the
basic
the Basic
last setPriority,
(set3).higher
Then the
priority
traffic
has
higher
nominal
services
in each
set
are sorted
This parameter
indicates
the
bit
rate.
In
the
process
of
NodeB
according
to
their
scheduling
nominal bit rate for
HSDPA
prioritiesquick
(SP).scheduling,
The service
services
hsNormBitRate
iswill
used
ranking
foremost
beas
on
E-DCH.
It is mapped
from the
minimum
guarantee
bit
rate.
scheduled
first.higher basic
Basic
Priority,
priority traffic has higher nominal
bit rate. In the process of NodeB
HSUPA quick scheduling,
edchNormBitRate is used as
minimum guarantee bit rate.
0.1..10, step 0.1
0..384, step 1
0..2147483647

priority level of
Allocation/Retention Priority
(ARP).
RNC

traffic class
RNC and
PLMN

Basic Priority (BP) which is a
kind of service priority mapping
from RAB parameters such as
ARP, traffic class and THP. It is
used in other RRM priority
mapping.
RNC and
PLMN

Relationship Profile Object ID
Scheduling Priority configuration
index. There are several different
sets of configuration of the
Scheduling Priority configured in
RNC level and different cells can
use this parameter to index the
different sets of the configuration
separately.
RNC
0: Voice
1: Video
2: Streaming
3: Background
4: corresponding
QoS Guarantee
1..15
to the values of
THP segment of
interactive
services 1
5: corresponding
QoS Guarantee
to the values of
THP segment of
interactive
services 2
6: corresponding
QoS Guarantee
to
the values of
0..15
/overbooking on iux THP segment of
interactive
services 3
19: Session
Basic Identification Initiation Protocol
0..2147483647
Parameter
N/A
N/A
N/A
N/A
UTRAN Cell
and PLMN
QoS Guarantee
0..255
N/A
RNC
Parameter
0..2147483647
N/A

mapping.
UTRAN Cell
and PLMN
QoS Guarantee
0..15
N/A

radio bearer type.
UTRAN Cell
and PLMN
QoS Guarantee

Scheduling Priority (SP) mapped
from Basic priority (BP) and
UTRAN Cell
bearer type. It is used in
and PLMN
scheduling the real queue and
pre-emption.
QoS Guarantee
0..15
N/A
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
and PLMN
QoS Guarantee
This
parameter
indicates
the
Application
Priority
Mapping
Application
Priority
configuration
Relationship Profile Object ID
index. There are several different
sets of configuration of the
Application Priority configured in
different
sets ofisthe
configuration
The parameter
used
to identify
separately.
The
configuration
the Scene of the application
parameters
indicated
byisthis
priority. the value
of "0"
to
index is that
usedthe
forapplication
selecting users
identify
in
congestion
control
andcontrol
load
priority
are used
for load
control
algorithm. the value of "1" is to
identify that the application
priority are used for congestion
control algorithm.
RNC
0: DCH
1: HSPA
2: MBMS
0..255
0: Application
Priority
Configuration for
Load Control
QoS Feature Guide 1: Application
Priority
Configuration for
Congestion
Control
N/A
N/A
N/A

RNC
Parameter
0..2147483647
N/A

Basic Priority. It is used in the
mapping of the Application
Priority.
UTRAN Cell
QoS Guarantee
0..15
N/A

radio bearer type.
UTRAN Cell
and PLMN
QoS Guarantee
UTRAN Cell
and PLMN
QoS Guarantee
0: Uplink
1: Downlink
UTRAN Cell
QoS Guarantee
0: <=16Kbps
1: (16, 64]Kbps
kbps
2: (64, 128]Kbps
3: (128, 384]Kbps
4: >384Kbps
UTRAN Cell
and PLMN
QoS Guarantee
0..15
N/A
RNC
Parameter
0..2147483647
N/A
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
1..255
N/A
RNC
Parameter
0, 1
N/A
RNC
Parameter
0..2147483647
N/A
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
0..15
N/A
Radio Bearer Type. Now can set

RNC
as DCH, HSPA, MBMS
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation

service direction used in
application priority mapping. The
uplink application priority is
mapped from uplink rate, and
downlink application priority is
mapped from downlink rate
This parameter indicates the rate
class which is used to map basic
priority
of service.
This parameter
indicates the
Application Priority (AP) which is
mapped from Basic Priority,
bearer type and rate segment. It
is used in load control. It makes
possible to provide higher rate to
users with higher priority while
lower rate to users with lower
This
parameter indicates
priority.
transport Bearer Type Profile
Related to Basic Priority Object
ID
Type Index

transmission Mode

Transport Bearer Type Related
to Basic Priority Object ID
mapping.
0: DCH
1: HSPA
2: MBMS
enum: 0: DCH
1: HSPA
2: MBMS
N/A
N/A
N/A
Transport Bearer Type. Can be

set as ATM and IP
RNC
The DSCP value of dedicated

service when basic proiority QOS
MAP is used. Available when
RNC
Transport Bear Type is IP.
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
DiffServ
Uplink Reserved Bandwidth for

DCH or HSPA I/B Traffic
RNC
Transport CAC
Downlink Reserved Bandwidth

for DCH or HSPA I/B Traffic
RNC
Transport CAC
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation

Bearer Qos Profile Object ID
Transport Qos Profile parameter

Index
RNC
Initial Transport Network Scene
RNC

Bearer Qos Configuration Object RNC
ID
Traffic Category.Please Refer to
the Value Range for detail
information.
Transport Bearer Type for IUR

Interface
RNC
RNC
The 1st Priority Transport Bearer

RNC
Type for IUB Interface
The 2nd Priority Transport

Bearer Type for IUB Interface
RNC
RAN Transmission
overview
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
8: HSUPA
(HSUPA Video)
9: R99 CS
(R99 CS
enum:
conversational)
DBS_TBEARERT
10:
R99 CS
YPE_ATM:
(R99 CSATM
DBS_TBEARERT
streaming)
YPE_IP:
IP
11: R99 PS
(R99 PS
conversational)
12: R99 PS
(R99 PS
0..63
streaming)
13: R99 PS
(R99 PS
interactive
high 1
0..65535, Step
priority)
14: R99 PS
(R99 PS
interactive middle
0..65535, Step 1
priority)
15: R99 PS
(R99 PS
interactive low
0..2147483647
priority)
16: R99 PS
(R99 PS
background)
17: HSDPA
1..32
(HSDPA
conversational)
18: HSDPA
(HSDPA
streaming)
0~5
19: HSDPA
(HSDPA
interactive high
priority)
20:
HSDPA
0..2147483647
(HSDPA
interactive middle
priority)
21: HSDPA
(HSDPA
interactive
low
Enum value:
priority)
SigDBS_TBEARE
22:
HSDPA
RTYPE_ATM:
ATM
0: Invalid
(HSDPA
(0)
21: IP Domain 1
background)
DBS_TBEARERT
22:
IP Domain 2
23: HSUPA
YPE_IP:
IP
(1) 3
23: IP Domain
(HSUPA
10: ATM RT Type
conversational)
11:
ATM NRT1
0: Invalid
24:
HSUPA
Type
21:
IP Domain 1
(HSUPA
12: ATM
NRT2 2
22:
IP Domain
streaming)
Type
23:
IP
Domain
3
25:
HSUPA
13:
ATM
NRT3
10:
ATM
RT
Type
Type
11:
ATM NRT1
(HSUPA
14:
ATM MIX Type
Type
interactive high
12:
ATM NRT2
priority)
Type
26: HSUPA
13:
ATM NRT3
Type
(HSUPA
14:
ATM MIX
Type
interactive
middle
priority)
27: HSUPA
N/A
N/A
kbps
kbps
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
RNC
DiffServ,
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
11:
ATM NRT1
0: Invalid
Type
21: IP Domain 1
12: ATM
NRT2 2
22:
IP Domain
Type
23: IP Domain 3
13:
10: ATM
ATM NRT3
RT Type
Type
11:
ATM
NRT1
0:
Invalid
14:
ATM MIX Type
Type
21: IP Domain 1
12: ATM
NRT2 2
22:
IP Domain
Type
23: IP Domain 3
13:
10: ATM
ATM NRT3
RT Type
Type
11:
ATM
NRT1
0:
Invalid
14:
ATM MIX Type
Type
21: IP Domain 1
12: ATM
NRT2 2
22:
IP Domain
Type
23: IP Domain 3
13:
10: ATM
ATM NRT3
RT Type
Type
11: ATM NRT1
14:
ATM MIX Type
Type
12: ATM NRT2
Type
13: ATM NRT3
Type
0..63
14: ATM MIX Type
Uplink Reserved Bandwidth for

I/B Traffic
RNC
Transport CAC,
0..65535, Step: 1
kbps
Downlink Reserved Bandwidth

for I/B Traffic
RNC
Transport CAC,
0..65535, Step: 1
kbps
RNC
Parameter
0..2147483647
N/A
0..255
N/A
The 3st Priority Transport Bearer

RNC
The 4th Priority Transport Bearer

RNC

RNC

RNC
The DSCP value of dedicated

service
Access
Control Profile
Related
This parameter
indicates
the to
Basic
Priority
Object
ID
index of the configuration of the
set of the admission control
parameters based on the Basic
Priority. Different requirements
make different configurations of
the parameters. And different cell
can use this parameter to index
different configuration. The set of
parameters corresponding to this
This
indexparameter
is mappedindicates
from thethe
Basic
Initial
Load
Scene
used for CAC
Priority.
threshold parameters
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
N/A
N/A
N/A
N/A
N/A
RNC
Parameter
0: Normal Load
Cell
1: High Load Cell
N/A
Access Control Related to Basic

RNC
Priority Object ID
Parameter
0..2147483647
N/A

Basic Priority used in admission
control algorithm. Its value range
is 0~16, where 0~15 is the real
value range for the Basic Priority
and 16 means handover.
Admission Control
0..16
N/A
UTRAN Cell
and Basic
Priority
Related

uplink RTWP threshold for DCH
admission control. If the uplink
interference exceeds this
admission control threshold, the
new
request
on DCH
This service
parameter
indicates
the will
not
be
admitted.
This
parameter
downlink TCP threshold for DCH
is
configured
based
on thepower
Basic
admission.
If the
downlink
Priority.
exceeds this admission control
threshold, the new service
request
on DCHindicates
will not be
This parameter
the
admitted.
This
parameter
uplink RTWP threshold forisEconfigured
basedIfon
Basic
DCH admission.
thethe
uplink
Priority.
interference exceeds this
admission control threshold, the
new
requested
onthe
EThis service
parameter
indicates
DCH
will
not
be
admitted.
This
downlink TCP threshold for HSparameter
is configured
based
DSCH admission.
If the downlink
on
the
Basic
Priority.
power exceeds this admission
control threshold, the new
service requested on HS-DSCH
will not be admitted. This
This
parameter
indicatesbased
the
parameter
is configured
downlink
TCP
threshold
for
on the Basic Priority.
MBMS
admission.
If the downlink
This parameter
indicates
the
power
exceeds
this
admission
MBMS
load threshold
for the
This
parameter
indicates
control threshold, theIfnew
MBMS
counting/recounting.
cell
load is
code
tree
reserved
ratio,
which
service
willthan
not the
be admitted.
is
greater
threshold
used in the admission control
indicated
this on
parameter,
algorithm by
based
code tree
counting/recounting
willto
be
reserved ratio, in order
executed
and
the
PTP
/PTM
reserve some codes for users of
mode will
be switched
based on
certain
service
type. Another
the
counting/recounting
parameter
used in this algorithm
result.may
be switch
to PTM
is the reference
SF layer,
which
mode
based
on
the
means the reserved codes for
counting/recounting
result.
the cell is for the service
corresponding to the reference
SF layer. These two parameters
should be used together, and the
reserved
codes number
of the
User Authorized
PLMN+SNAC
reference
SF
layer
is
calculated
by using the code tree reserved
ratio. This parameter is
configured based on the Basic
Priority.
This parameter indicates number
of IMSI digit
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
0..62, step 0.1
dB
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
1..100, step 1
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
0..62, step 0.1
dB
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
1..100, step 1
UTRAN Cell ,
PLMN, and
MBMS
Basic Priority
Related
1..100, step 1
UTRAN Cell ,
PLMN, and
MBMS
Basic Priority
Related
1..100, step 1
UTRAN Cell ,
PLMN, and
Admission Control
Basic Priority
Related
0..100, Step 1
RNC
Parameter
0..2147483647
N/A
RNC
Handover Control
1..15
N/A
This parameter indicates digit of

RNC
IMSI
Handover Control
0..9
N/A

number of SNAC
RNC
Handover Control
0..10
N/A
The parameter indicates MCC of

network that is shared by UEs
having same MCC+MNC+
RNC
Extend Information Digits Num+
Extend Information.
Handover Control
0..999
N/A
The parameter indicates MNC of

network that is shared by UEs
having same MCC+MNC+
RNC
Extend Information Digits Num+
Extend Information.
The parameter indicates shared
network area code of network
that is shared by UEs having
RNC
same MCC+MNC+ Extend
Information Digits Num+ Extend
Information.
Handover Control
0..999
N/A
Handover Control
0..65535
N/A
RNC
Parameter
0..2147483647
N/A
The Index of IMSI in WhiteList,

used for parameter setting
indication in OMC-R only, no
other meaning
RNC
Parameter
0..65535
N/A

IMSI Digits Number in White List RNC
for User Identification
N/A

IMSI High-bit Digits in white List
for User Identification
RNC
N/A

whether the User is VIP
RNC
VIP QoS Guarantee

basic priority of UE in the white
list
RNC
N/A

HSPA Scheduling priority of UE
in the white list
RNC
N/A

Congestion Scheduling priority of RNC
UE in the white list
N/A

application priority of UE in the
white list
RNC
N/A

timer length of relocation delay
for VIPs' CS service.
RNC
Handover Control
100ms
0: No
1: Yes
0..65535, Step 1
N/A

timer length of relocation delay
for VIPs' PS service.
RNC
Handover Control
0..65535, Step 1
100ms

Object ID
RNC
Parameter
0..2147483647
N/A
RNC
Handover Control
0..65535
N/A
RNC
Handover Control
N/A
N/A
RNC
Parameter
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management

shared network area code that
the location area belongs to.
One LAC can belong to at most
four SNAC (shared network area
code).
This parameter identifies
UE
Timer.
Waitingarea.
TimeLAC
After UE
different
location
Sending
RRC
CONNECTION
belongs to LAI (LAI = MCC +
SETUP
REQUEST Message.
MNC + LAC).
UE starts T300 after transmitting
the RRC CONNECTION
REQUEST message. If T300
UE
Timers
Constants
expires,
UEand
shall
retransmit the
Information
Object
IDSETUP
RRC CONNECTION
REQUEST message. If the
message retransmission number
is greater than N300, UE shall
Maximum
number of
enter idle mode.
retransmissions of the RRC
CONNECTION
Start:
Transmission
of RRC
UE
timer
in idle REQUEST
mode.
Waiting
message.
CONNECTION
REQUEST
in
Time for Receiving
"In Sync"
UE
starts
T300
after
transmitting
case
of
connection
from L1 in Idle Mode.
the
RRC
CONNECTION
establishment
forestablishing
reasons other
In
Idle
mode,
for
REQUEST
message.
T300
than MBMS
reception.
dedicated
channel,
UEIf shall
expires,
UE
shall
retransmit
the
Stop: Reception
of RRC
receive
consecutive
N312Idle
"In
RRC
CONNECTION
SETUP
CONNECTION
Sync"
indicationSETUP.
from L1 before
REQUEST
message. RRC
If the
At
expiry: expires.
Retransmit
T312Idle
message
retransmission
number
CONNECTION
REQUEST
if
is
greater
than
N300,
UE
shall
message
retransmission
number
Start:
When
the
UE
starts
to
UE timer. Waiting Time After UE
enter
idleCELL/URA
mode.
=< N300,
else
go to CH
Idle
mode
establish
dedicated
Sending
UPDATE
Stop: When the UE detects
Message.
N312
"in sync"
from
UE
starts
T302 indication
after transmitting
maximum
number of "in sync"
L1. CELL UPDATE/URA
the
received
in idle
mode
At
expiry:from
The L1
criteria
physical
UPDATE
message.
If for
T302
before
the
timer
T312Idle
channel
establishment
failure
is
expires, UE shall retransmit the
expires.
fulfilledUPDATE/URA UPDATE
CELL
message. If the message
retransmission number is greater
Maximum
number
of enter
thantimer.
N302,
UE shall
idleUE
UE
Waiting
Time
After
retransmissions
of
the CELL
mode. UE CAPABILITY
Sending
UPDATE
/ URA UPDATE
INFORMATION
Message.
message.
Start:
Transmission
CELL
UE starts T304 afteroftransmitting
UE
starts
T302
after
transmitting
UPDATE/URA
UPDATE.
the UE CAPABILITY
the
CELL
UPDATE/URA
Stop:
Reception
of CELL If
INFORMATION
message.
UPDATE
message.
If/ T302
UPDATE
CONFIRM
URA
T304
expires,
UE shall
expires,
UE
shall
retransmit
the
UPDATE CONFIRM.
retransmit
the UE CAPABILITY
CELL
UPDATE/URA
UPDATE
At expiry: Retransmit
CELLIf the
INFORMATION
message.
message.
If theUPDATE
messageifnumber
UPDATE/URA
message retransmission
retransmission
number
isnumber
greater
message
is
greater retransmission
than N304,
UE
shall
than
N302,
UE
shall
enter
idle
=< N302,
else,
go
to procedure.
Idle mode
initiate
a cell
update
mode.
Start: Transmission of UE
Stop: Reception of UE
CONFIRM.
At expiry: Retransmit UE
CAPABILITY INFORMATION if
RNC
Connection
Management
0: 100
1: 200
0..2147483647
2: 400
3: 600
4: 800
5: 1000
6: 1200
7: 1400
8: 1600
9: 1800
10: 2000
11: 3000
12:
0..74000
13: 6000
14: 8000
0:
1 Step: 1
1..15,
1: 2
2: 4
3: 10
0:
4: 100
20
1:
5: 200
50
2:
6: 400
100
3:
7: 600
200
4:
8: 800
400
5:
9: 1000
600
6:
10:1200
800
7:
11:1400
1000
8: 1600
9: 1800
10: 2000
11: 3000
12:
0..74000
13: 6000
14: 8000
0: 100
1: 200
2: 400
3: 1000
4: 2000
N/A
ms
N/A
ms
N/A
ms
Maximum number of
retransmissions of the UE
UE
timer. Period
of Cell/URA
CAPABILITY
INFORMATION
Update
When UE is in
message.
CELL_FACH/CELL_PCH/URA_
UE starts T304 after transmitting
PCH
State.
the UE
CAPABILITY
If
T305 expires and
UE detects
INFORMATION
message.
If
"out
service UE
area",
UE shall
T304ofexpires,
shall
start
T307.the UE CAPABILITY
retransmit
INFORMATION
UE
timer. waitingmessage.
time for If the
Start:
Entering
CELL_FACH
or
message
retransmission
number
reentering
service
area After
after
UE
UE
timer. Waiting
Time
URA_PCH
or
CELL_PCH
state.
greater
than
N304,
UE
shall
is
out
of
service.
Sending
RRC
CONNECTION
Reception
of update
CELL
initiate
cell
procedure.
If T305 aexpires
and UPDATE
UE
detects
RELEASE
COMPLETE
Message
CONFIRM
/ URA
UPDATE
"out
of
service
area",
UE shall
in
CELL_DCH
State.
CONFIRM.
start
T307.T308
During
T307
running,
UE
starts
after
transmitting
Stop:
Entering"inCELL_DCH
or
ifthe
UERRC
detects
service
area",
CONNECTION
Idle
stat.
UE
stop T307.
If T307 expires,
RELEASE
COMPLETE
At
expiry:
Transmit
CELL
UE
enter
Idle
mode.
message.
T308isexpires,
UE
UPDATE ifIfT307
not activated
shall
retransmit
the
RRC
and the
UE detects
"inT305
service
Start:
When
theRELEASE
timer
has
CONNECTION
area".
Otherwise,
if T307
is not
expired
and
the
UE
detects
COMPLETE
message. If the"out
active,
start
T307.
of
service
area".
UE
timer.
Waiting
Time After
message retransmission
number
Stop:
When
the
UE
"in
Requesting
Connection
is greater than N308,detects
UE shall
UE
timer
in
connected
mode.
service
area".
Establishment
in
Other
System
enter idle mode.
Waiting
Time
for Receiving
"In
At expiry:
Transit
to idle mode
(eg.
GSM).
Sync"
from
L1
in
connected
Start: Transmission of RRC
mode.
Start:
Upon reception
of CELL
CONNECTION
RELEASE
In
connected
mode,FROM
for
CHANGE
ORDER
COMPLETE
establishing
dedicated channel,
UTRAN
Stop: notmessage
stopped
UE
shall
receive
consecutive
Stop:
Successful
response
At expiry: Transmit
RRC to a
N312Connected
"In Sync"
connection
establishment
CONNECTION
RELEASE
indication
L1 before
request
in from
theif new
cell.
COMPLETE
message
T312Connected
expires.
UE
timer.
Waiting
Time
At
expiry:
Resume
the After
retransmission number
<=N308,
DPCCH
Established
connection
to UTRAN
else go to
idle
mode. in
Start: When State
the UE
starts to
CELL_DCH
Losing
establish
dedicated CH
Synchronization.
Stop:
When
thestate,
UEofdetects
In
CELL_DCH
after
maximum
number
"in sync"
N312
"in
sync"
indication
from
receiving
N313
consecutive
"out
received from L1 in connected
L1.
of
sync"
indications
from
layer
1,
mode before the timer
At
expiry:
The
criteria
for
physical
UE
shall
start
T313.
During
T313
T312Connected expires.
channel
running,
upon
receiving
N315 is
UE
timer.establishment
Waiting
Time failure
for
fulfilled
successive "in
sync"
indications
Completion
of Cell
Update
When
from layer
UE and
shallRadio
stop and
Radio
Link1,
Fails
Maximum
successive
reset
timer
T313. IfofT313
Bearer
(s) number
Associated
withexpires,
T314
"out
of sync"
received
L1.
UE shall
consider
it asfrom
a "Radio
Exist.
In
CELL_DCH
state, after
link
failure".
UE
timer. N313
Waiting
Time for "out
receiving
consecutive
Start:
Whenof
the
criteria
for When
radio
Completion
Cell
Update
of
sync"
indications
from
layer
1,
Start:
When
the
UE
detects
link
failure
are
fulfilled.The
timer
Radio
Link
Fails
andDuring
Radio T313
UE
shall
start
T313.
consecutive
N313
"out
of
sync"
is
started
ifAssociated
radio bearer
(s)T315
that
Bearer
(s)
with
running,
upon
indication
fromreceiving
L1. T314N315
are associated
with
exist or
Exist.
indications
Stop:
thesync"
UE detects
ifsuccessive
onlyWhen
RRC "in
connection
exists
from
layer
1,
UE
shall
stop and
consecutive
N315
"in
sync"
only
to
the
CS
domain.
Start:
WhenT313.
the criteria
forexpires,
radio
reset
timer
If T313
indication
from
L1.
Stop:
When
thefulfilled.The
Cell
Update
link
failure
are
timer
UE
shall consider
it as
a "Radio
At
expiry:
criteria
for
Radio
procedure
has
been
completed.
is
started
ifThe
radio
bearer
(s)
that
link
failure".
Link
failure
is
fulfilled.
At
expiry:
if
timer
T302
is
are associated with T314 exist or
UE connection
shall continue
ifrunning,
only RRC
exists
awaiting
CELL
UPDATE
only to the
PS domain.
CONFIRM
URA
UPDATE
Stop: Whenorthe
Cell
Update
CONFIRM
message
from
Maximum
number
of
successive
procedure has been completed.
UTRAN.
"in
sync"
received
from
L1 during
At expiry: if timer T302 is
if
timer
T302
is
not
running
T313
is
activated.
running, UE shall continue and
timer
T315
is running,
UE shall
In
CELL_DCH
state,
after
awaiting
CELL
UPDATE
release
radio
(s) that "out
are
receiving
N313
consecutive
CONFIRM
or bearer
URA
UPDATE
associated
with
T314.
of
sync"
indications
from
layer
1,
CONFIRM message from
if
timers
T302
and
T315
are
not
UE
shall
start
T313.
During
T313
UTRAN.
UE shall
release
alland
its
running,
upon
N315
if timer T302
isreceiving
not
running
radio
resources
and
enter
idle
successive
"in
sync"
indications
timer T314 is running, UE shall
mode.layer
from
1, UE
shall(s)
stop
release
radio
bearer
thatand
are
reset
timer T313.
If T313 expires,
associated
with T315.
UE
shall consider
as a "Radio
if timers
T302 anditT314
are not
link
failure".
running, UE shall release all its
radio resources and enter idle
mode.
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
0..7
0: No Update
1: 5
2: 10
3: 30
4: 60
5: 120
0:
6: 5
360
1:
7: 10
720, Step 1
2: 15
3: 20
4: 30
5: 40
6: 50
0: 40
1: 80
2: 160
3: 320
N/A
min
ms
1..8, Step: 1
0:
1 Step: 1
1..15,
1: 2
2: 4
3: 10
4: 20
5: 50
6: 100
7: 200
8: 400
9: 600
10: 800
0..15,
Step: 1
11: 1000
0: 1
1: 2
2: 4
3: 10
4: 20
5: 0
50
0:
6:
1: 100
2
7:
2: 200
4
3: 6
4: 8
5: 0
12
0:
6:
1: 16
10
7:
2: 20
30
3:
0: 60
1
4:
1: 180
2
5: 4
600
2:
6:
3: 1200
10
7:
4: 1800
20
5: 50
6: 100
7: 200
8: 400
9: 600
10: 800
11: 1000
N/A
N/A
N/A
out of Service in
CELL_PCH/URA_PCH State.
Start: When the UE detects "out
of service area" in URA_PCH or
CELL_PCH state
Stop:parameter
When the indicates
UE detects "in
This
service
whetherarea".
the fast Dormancy is
At
expiry:
Initiate
update
active.
When
fastcell
dormancy
procedure
using
as
cause
switch is "On" , RNC send "ReT323
entering
service
area"
if "in
to
UE
by
SIB1
and
UTRAN
This
parameter
the
service
is indicates
detected.
mobility area"
information.
UE is
interval
of
reporting
signalling
Otherwise
start into
timerdormancy
T317, by
capable
switch
connection
release indication
transit
to CELL_FACH
state and
self
judgment.
When
it
(with
cause).
As UEprocedure
in is " Off" ,
initiate
cell
update
RNC
send message
without
connection
mode
in PS
domain,
when
the
UE
detects
"insignalling
service
T323,
RNC
will
release
a
prolonged
time
without
PS data
area".
connection
byifevaluating
traffic
transmission,
T323 is not
or signalling
connection
release
running,
UE send
signalling
command.
connection release indication
(with cause) to switch states, and
start T323. If no data transmit
before
T323 timeout
and UE still
Cell Extended
Info Configuration
in connection
mode,an
then
resend
Object
ID, identifies
object
signalling
connection
under its parent
objectrelease
uniquely.
indication (with cause).
whether attach and detach
procedures
are required
be
This parameter
indicatesto
the
used
or
not.
supported CN domain
TRUE: When the UE is switched
The
mode is
off ornetwork
the SIMoperation
card is unplugged,
used
to
indicate
whether
the Gs
send one message of IMSI
interface
is
installed
or
not.
detach to the network side.
Network
Operation
When theMode
UE isofswitched
on,I
indicates
that
Gs
interface
supposing
that
the
UE
is
still
This
parameter indicates the in
CS
occurs.
the
registration
district
where it is
domain
DRX
cycle
length
Network Mode
ofshall
Operation
deactivated,
UEs
apply II
coefficient.
indicates
that
Gs
interface
does
IMSI
attach is
and
The
T3212
theisdetach
timeout
This
parameter
used forvalue
the
not
occur.
procedure.
Otherwise,
UEs
shall
for
periodic
location
areain the
difficult
reception
of
UE
The
Gs
interface
means
that
not
apply
IMSI
attach
and
detach
updating
inand
deciphers.
idle
mode
Cell_PCH
/
there
is a LA/RA
combined
procedure.
The
location
update
occurs
This
parameter
indicates
theinPS
URA_PCH
mode.
This
update.
LA/RA
combined
update:
the
system
due
to
two
reasons:
domain
DRX
cycle to
length
parameter
is used
calculate
when
the
UE
with
a
CS
UE
finds
the
location that
areais,
has
coefficient.
the
paging
occasion,
a
connection
trigger
attaching
to
changed
(different
LAC)
and
the
This
parameter
is
used
for
the
constant
required
in
monitoring
the
SGSN,
the SGSN
network
prescribes
that
the
MS
difficult
reception
of
UE
in
the
the
PICH cycle.
The difficult
will
trigger
the ROUTE
UPDATE
should
update
the
location
idle
mode
and
Cell_PCH
/
reception
cycle
is
2^k
frames.
procedure.
periodically.
The
T3212
is
URA_PCH
mode.ifThis
In the idle mode,
UE has
representation
of
the
timeout
parameter
used
to calculate
attached inisCS
domain
and PS
value
for
periodic
location
area
the
paging
occasion,
that
is,
a
domain, then k is the minimum
updating.
constant
required
in
monitoring
value in CS domain DRX cycle
the
PICH
cycle. The
length
coefficient,
PSdifficult
domain
reception
is coefficient.
2^k frames.If
DRX cyclecycle
length
In
mode, only
if UEinhas
UEthe
hasidle
attached
one
attached
in CS
domain
and PS
domain (CS
domain
or PS
domain,
minimum
domain),then
thenkkisisthe
attached
This
parameter
indicates
value
in
CS
domain
DRX
cycle
domain DRX cycle length the
modification
period
coefficient
for
length
coefficient,
PS
domain
coefficient.
MBMS.
MBMS
modification
DRX
length mode,
coefficient.
If
In thecycle
connection
k is the
period
where k
UE
hasequals
attached
in one
minimum
value2^k*10ms,
inonly
CS domain
is
thecycle
modification
period
domain
(CSlength
domain
or PS PS
DRX
coefficient,
coefficient
for
MBMS.
A
domain),
then
k
is
attached
domain DRX cycle length
modification
period
to
start
from
domain
DRX
cycle
length
coefficient, and UTRAN
DRX
the
frame
with
the
SFN
value
coefficient.
cycle length coefficient.
fulfills
the followingmode,
equation:
In the connection
k is the
Cell
Extended
Info
Configuration
SFN
mod
2^k
=
0.
minimum value in CS domain
Object
ID, identifies
an objectPS
DRX cycle
length coefficient,
under
its
parent
object
uniquely.
domain DRX cycle length
coefficient, and UTRAN DRX
0: 0
1: 10
2: 20
3: 30
4: 40
5: 50
6: 255
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Parameter
RNC and
PLMN
Connection
Management
RNC and
PLMN
Connection
Management / Idle
Mode and Common
Channel Behavior
RNC and
PLMN
Connection
Management
RNC and
PLMN
Connection
Management
0, 0.1..25.5, step
0.1
hours
RNC and
PLMN
Connection
Management
6..9
N/A
RNC and
PLMN
Connection
Management
6..9
N/A
RNC
MBMS /Connection
7..10
Management
N/A
RNC
Parameter
N/A
0: Off
1: On
0: 0
1: 5
2: 10
3: 20
4: 30
5: 60
6: 90
7: 120
0..2147483647
N/A
N/A
0: CS Domain
1: PS Domain
N/A
2: CS +PS Domain
0: Not Apply IMSI
Attach and Detach
Procedure
N/A
1: Apply IMSI
Attach and Detach
Procedure
0: Network Mode
of Operation I
N/A
1: Network Mode
of Operation II
0..2147483647
message, it shall start the timer

Trelocprep.
Upon reception of the
Specifies
the maximum
time for
RELOCATION
COMMAND
the
protection
of overall
message
the source
RNC shall
Relocation
procedure
in the
stop the timer
Trelocprep,
and
source
RNC.
terminate the Relocation
Upon
reception
of the
Preparation
procedure.
RELOCATION
COMMAND
If there is no response
from the
message
source RNC shall
CN to the the
RELOCATION
stop
the timer
Trelocprep,
start
REQUIRED
message
before
the
timer
Trelocoverall
and
timer Trelocprep expires in the
terminate
the the
Relocation
source RNC,
source RNC
Preparation
shall cancel procedure.
the Relocation
If
the Iu Release
procedure
Preparation
procedure
by is
not
initiated
towards
the Cancel
source
initiating
the
Relocation
Specifies
the
time
to startthe
RNC
from
the
CN
before
procedure
with
the
appropriate
This
parameter
indicates
sending
forwarded
PDCPthe
expiry
ofthe
timer
Trelocoverall,
value
for
the
Cause
IE, e.g.
Maximum
Time
for
RAB
Queuing
SDUs
in
the
target
RNC
during
source
RNC
should
initiate
the Iu
"Trelocprep
expiry"
in
RNC,
RNC
will
return
RAB
relocation
of
SRNS.
Release
Request
procedure
failure ifthe
the
expire
Specifies
thetimer
maximum
time for
During
SRNS,
towards
therelocation
CN with
aofcause
Reset
procedure
in the
RNC.
the
target
RNC
starts
the
timer
value
"Trelocoverall
expiry".
If
the RNC
sends
a RESET
which
equals
to the
value of the
message
the CN
and receives
parametertoafter
the target
RNC
no
RESET
ACKNOWLEDGE
receives the UE's response such
message
within aoftime of
as the message
"Maximum
Waiting Time for
RadioBearReconfigComplete.
RESET
RNC"
then it target
shall
After theintimer
expires,
repeat
the entire
Reset
RNC begins
to send
the
procedure.
The sending to
of UE
the
forwarded PDCP-SDUs
Specifies
a
guard
period
in
the
RESET
message
shall
be
including the Iu DL PDCP-SDUs.
RNC
before
sending aofRESET
repeated
a maximum
"n"
ACKNOWLEDGE
times where n is anmessage.
operator
After
a guard
period
matter.
After the
n-th of TRatC
seconds
unsuccessful
repetition
SpecifiesaaRESET
guard
periodthe
in the
ACKNOWLEDGE
message
shall
procedure
shall
be
stopped
and
RNC before sending
a RESET
be
returned
toACKNOWLEDGE
thesystem
CN, indicating
the
maintenance
be
RESOURCE
Specifies
the maximum
for
that
all references
at thetime
UTRAN
informed.
message.
Reset
Resource
procedure
in
the
have
been cleared.
After
RNC.a guard period of
Tresetdelay,
a RESET
If the RNC sends
a RESET
RESOURCE
RESOURCE ACKNOWLEDGE
message to the CN
message
shallnobeRESET
returned to the
and
receives
CN,
indicatingACKNOWLEDGE
that all references
RESOURCE
at
the UTRAN
been
message
withinhave
a period
cleared.
Tresetwait, then it shall repeat
the entire Reset Resource
procedure.the
The
sending
of the
Specifies
timer
for Ignoring
RESET
RESOURCE message
OVERLOAD.
shall
repeated
maximum
Whilebe
this
timer is arunning,
all of
"n"
times
where
n
is
an
operator
OVERLOAD messages or
matter.
After
thecongested
n-th
signalling
point
Specifies
the
maximum
number
unsuccessful
repetition
the
information received at the
RNC
of
RESET
RESOURCE
reprocedure
shall be stopped.
are
ignored.
Specifies
the
timer
for
not
transmit.
allowing
to sends
increase
traffic.
If the RNC
a RESET
While
this
timer
is
running,
theCN
RESOURCE message to the
RNC
is
not
allowed
to
increase
and receives no RESET
traffic.
Specifies
the ACKNOWLEDGE
maximum number
RESOURCE
of
RESETwithin
re-transmit.
message
a period of time
If
theitRNC
RESET
then
shallsends
repeatathe
entire
message
to the CN
and receives
Reset Resource
procedure.
The
no
RESET
ACKNOWLEDGE
sending
of the
RESET
message
within
a time of
RESOURCE
message
shall be
"Maximum
Time
for
repeated a Waiting
maximum
of "n"
RESET
in RNC"
it shall
times where
n is then
an operator
repeat
entire
Reset
matter. the
After
the n-th
procedure.
The
sending
of the
unsuccessful repetition the
RESET
message
shall
be
procedure shall be stopped and
repeated
a maximum
of "n"
the maintenance
system
be
times
where n is an operator
informed.
matter. After the n-th
unsuccessful repetition the
procedure shall be stopped and
the maintenance system be
informed.
RNC
Handover Control
1..300, Step 1
100ms
RNC
Handover Control
1..300, Step 1
100ms
RNC and
PLMN

1..300, Step 1
use
100ms
RNC
Handover Control
1..300, Step 1
ms
RNC
connection
management
1..120, Step 1
RNC
connection
management
5..60, Step 1
RNC
connection
management
50..600, Step 1
100ms
RNC
N/A
0..1200, Step 1
100ms
RNC
Iu Flex
0..255, step 5
RNC
Iu Flex
0..300, step 10
RNC
N/A
1..5
N/A
RNC
IU RESET
1..5
N/A

Information Profile Object ID
RNC
Parameter
0..2147483647
N/A

DRBC strategy configuration
index.
RNC
Dynamic Radio
Bearer Control
0..255
N/A

DRBC strategy name.
RNC
Dynamic Radio
Bearer Control
N/A
N/A
RNC
Parameter
0..2147483647
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A

event 4B counter threshold for
Dynamic
Radio
Bearer or
Control
HSPA using
DTX/DRX
Information
Profile
Object
CELL_FACH using DRX toIDPCH
or IDLE shared by uplink and
downlink. For the HSPA UE
using the DTX/DRX and
CELL_FACH using Enhanced
This
parameter
indicates
the
UE DRX,
if the times
of the
event
4A
counter
threshold
for of
measured RLC buffer payload
CELL_FACH->CELL_DCH.
For
the uplink and downlink being
the
in CELL_FACH
state, if
zeroUE
exceed
the threshold
the
times
of the
measured
RLC
indicated
by
thisindicates
parameter,
UE
This
parameter
the
buffer
payload
of the
uplink
or or
will be4A
transferred
from
HSPA
event
counter
threshold
for
downlink
being
larger
than
the
CELL_FACH
toon
PCH
or
IDLE,
increasing
rate
DCH
or
DCH4A
threshold
exceed
the
and it is prior
to PCH
state.DCH
>HSPA.
For the
UE using
threshold
indicatedif by
in both directions,
thethis
times of
parameter,
UERLC
will be
transferred
the measured
buffer
from
CELL_FACH->CELL_DCH.
payload
of the uplink
or downlink
This parameter
indicates
the
being
larger
than
the
4A
threshold
threshold
decreasingexceed
rate onthe
DCH.
For the
indicated
by
this
parameter,
UE's
UE using DCH in both directions,
data
rate
on
DCH
will
be
if the times of the measured RLC
increased
or UE
will
buffer
payload
ofindicates
thebe
uplink
This
parameter
theor
transferred
from
DCH
to HSPA.
downlink
being
less
than
the
4B
threshold
exceed
the
threshold
CELL_DCH to PCH shared by
indicated
this parameter,
uplink andbydownlink.
For the UE's
UE
data
rate
on
DCH
will
in CELL_DCH state, ifbe
the times
decreased.
This
the
of theparameter
measuredindicates
RLC buffer
event
4Bofcounter
threshold
payload
the uplink
and for
CELL_FACH
without
Enhanced
downlink being
zero exceed
the
UE
DRX
to
PCH
shared
by
threshold indicated by this
uplink
and downlink.
the UE
parameter,
UE will beFor
transferred
This
parameter
thetimes
in
CELL_FACH
state,
if the
from
CELL_DCHindicates
to PCH.
event
4B
counter
threshold
of the measured RLC bufferfor
CELL_DCH
to uplink
idle state
payload of the
andshared
by
uplink being
and downlink
whenthe
downlink
zero exceed
PCH
is notindicated
supported
threshold
by by
thisUE or
This
parameter
indicates
the
UTRAN.
ForUE
thewill
UEbeintransferred
parameter,
event
4B
counter
threshold
CELL_DCH
state,
if
the
times
from CELL_FACH to PCH. forof
CELL_FACH
Enhanced
the measuredwithout
RLC buffer
UE
DRXof
tothe
idleuplink
state shared
by
payload
and
uplink
and
downlink
when
PCH
downlink being zero exceed the
is
not supported
by by
UEthis
or
threshold
indicated
UTRAN.
ForUE
thewill
UEbeintransferred
parameter,
CELL_FACH
state,
thestate.
times of
from CELL_DCH
to ifidle
the measured RLC buffer
payload of the uplink and
downlink being zero exceed the
parameter, UE will be transferred
from CELL_FACH to idle state.

time threshold of UE staying in
CELL_PCH or URA_PCH for the
For
the UEofwhich
is usingfrom
judgment
transferring
CELL_DCH,
if
the
measurement
CELL_PCH or URA_PCH
to idle.
of
thetime
occupied
the uplink
and
If the
of UEofhaving
stayed
in
downlink
sending
buffers. This
CELL_PCH
or URA_PCH
parameter
indicates
theindicated
event 4B
exceeds the
threshold
counter
threshold
for
CELL_DCH
by this parameter, UE will be
to
CELL_FACH.
the UE or
transferred
from For
CELL_PCH
using
CELL_DCH,
if
URA_PCH to Idle. the times of
This
parameterRLC
indicates
the measured
bufferthe
event
4A
counter
threshold
for
payload of the downlink being
switching
E-TTI
smaller than
the from
event10ms
4B's to
2ms.
For the
UE using
if
threshold
on uplink
andE-DCH,
the
the
times exceed
of the measured
user
downlink
the threshold
plane
E-DCH
throughput
being
indicated
by this
parameter,
This
parameter
indicates
thethe
larger
than
the
4A
threshold
UE will4B
becounter
transferred
from for
event
threshold
exceed
the
threshold
indicated
CELL_DCH
to CELL_FACH.
switching
E-TTI
from 2ms
to
by
this
parameter
and
2ms
E-TTI
10ms. For the UE using
E-DCH,
is
used,
UE's
E-TTI
will
be
if the times of the measured user
switched
to 2ms.
plane
E-DCH
throughput being
less
than
the
4B
thresholdthe
exceed
the
threshold
indicated
event A counter threshold
of
by
this
parameter
and
10msIfEconsecutive DTCP reports.
the
TTI
is of
used,
UE's E-TTI
will be
times
dedicated
transmitted
switched
to 10ms.
This
indicates
the the
codeparameter
power
being
larger than
event
B threshold
counter threshold
of
event A
exceed the
consecutive
DTCP reports.
threshold indicated
by this If the
times
of dedicated
transmitted
parameter,
it will trigger
downlink
code
power
being
less
PS or AMR decreasing than
rate. the
event B threshold exceed the
parameter, it will trigger downlink
AMR increasing rate or allow PS
services
to increase
rate on DL
This parameter
indicates
DCH
based
on
traffic
volume
whether transferring from
other
report.
This
parameter
indicates
transport channel to FACH is
whether
transferring
to
allowed or
not.
URA_PCH/CELL_PCH is
supported or not. If the value is
'Onlyparameter
Support URA_PCH',
allows
This
indicates the
UE
to transfer
to of
URA_PCH
increment
times
event 4B0 for
when
thereisisnot
nosensitive
data to for
UE which
transmit.
If
the
value
is 'Not
battery consumption is
Support',
UE
is
not
allowed
to
transferred to
transfer
to
URA_PCH
when
URA_PCH/CELL_PCH
orthe
Idle
This
parameter
indicates
there
is no data
to transmit.
state
on the
traffic volume
eventbased
4B counter
threshold
for
measurement,
relative to other
CELL_DCH to CELL_FACH
for
UEs.
For
this kind
of UE,
the
the UE
which
is using
Dtx/Drx.
value
ofUE
thisusing
parameter
is larger,
For the
Dtx/Drx,
if the
the
transition
for
the
UE
to
times of the measured RLC
URA_PCH
or Idle
is more
buffer payload
of the
downlink
difficult.
being smaller than the event
4B's threshold on uplink and the
downlink exceed the threshold
indicated by this parameter, the
Global
Controlfrom
UE will Access
be transferred
Information
ID
CELL_DCH Object
to CELL_FACH.
maximum number of the
congested calls in the true
queue.
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
1..255, step 1
N/A
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
RNC
Dynamic Radio
Bearer Control
0: Not Support
1: Only Support
URA_PCH
2: Only Support
CELL_PCH
N/A
RNC
Dynamic Radio
Bearer Control
0..65535
N/A
RNC

1..65535
use
N/A
RNC
Parameter
N/A
RNC
Congestion Control 0..32
0..2147483647
N/A

maximum time length that the
call can stay in the true queue,
after
the call setup
requirement
This parameter
indicates
the
is refused time
by the
Call Admission
maximum
length
that the
Control
algorithm.into
service, (CAC)
which relocates
UTRAN, can stay in the true
queue
after the indicates
relocationthe
This parameter
requirement
is
refused
by queue
the
maximum time in the true
Call Admission
when
service beControl
forced (CAC)
into
algorithm.
queue. In the condition that there
Value
0 means
no queueor the
is no queue
information
process.
RAB be assigned has no queue
ability in the RAB assignment
information, if the forced queue
This
parameter
indicates
when
switch
is" On" , then
this RAB
AMR
traffic
is being
has the
queue
ability,admitted,
and this if
MaxBR
is adopted
but fails time
to be
parameter
is the maximum
admitted
to soft resource
in the truedue
queue.
This
parameter
indicates
limit and
the switch
is on, the
the
forced
switch
lowest queue
assigned
rate for
willAMR
be
service.
the condition that
admittedInagain.
there is no queue information or
the RAB be assigned has no
This
parameter
indicates
the
queue
ability in the
AMR RAB
forced
queue
switch
for
CS
64
assignment information, if the
kbps
the condition
forcedservice.
queue In
switch
is "On", then
that
there service
is no queue
this AMR
has the queue
information
or the RAB be
ability.
assigned has no queue ability in
the CS 64 kbps service RAB
assignment information, if the
forced queue switch is "On", then
this CS 64 kbps service has the
This
parameter
queue
ability. is the HSPA
configuration object ID.
RNC
Congestion Control 1..60, Step 1
RNC
RNC
RNC
Admission
0: Off
Control /AMR-NB &
1: On
AMR-WB
N/A
RNC
Congestion Control
0: Off
1: On
N/A
RNC
Congestion Control
0: Off
1: On
N/A
RNC
Parameter
0..2147483647
N/A

whether the RNC supports the F- RNC
DPCH or not.
HSPA Evolution
0: Not Supported
1: Supported
N/A

whether the RNC supports the
Enhanced F-DPCH or not.
HSPA Evolution
0: Not Supported
1: Supported
N/A
HSPA Evolution
0: Not Supported
1: Supported
N/A
Code Resource
Allocation
0: Not Supported
1: Supported
N/A
Code Resource
Allocation
5..65535, step 5
RNC

whether RNC supports to
RNC
activate downlink 64QAM and
MIMO at the same time
whether the function to re-assign
the downlink DPCH
RNC
channelization code in HSDPA
cell is supported or not.
period to judge whether to reassign the channelization codes RNC
of one or several downlink
DPCH.
This parameter is the DTX/DRX

switch indicating whether
DTX/DRX is allowed to be used.
When the value of the switch is
"On", DTX/DRX is allowed to be
usedparameter
by the system;
This
is theotherwise
DTX switch
DTX/DRX
is speech
not allowed
to be
for real time
services
used.
indicating whether DTX is
allowed to be used. When the
value of the switch is "On", the
speechreal
timeisservices
This
parameter
the DTXare
switch
allowed
to use DTX,
otherwise
for non-realtime
services
not
allowed.
indicating
whether DTX is
non-realtime
services
are
This
parameter
is the DRX
allowed
toreal
use time
DTX,speech
otherwise
switch for
not
allowed.
services
indicating whether DRX
is allowed to be used. When the
speechreal
timeisservices
are
This
parameter
the DRX
allowed
tonon-realtime
use DRX, otherwise
switch for
services
not
allowed.
indicating
whether DRX is
non-realtime services are
allowed to use DRX, otherwise
not
Thisallowed.
parameter is a switch which
indicates whether HS-SCCH
Less is allowed to be used by the
RNC
This parameter is HS-SCCH
Less switch for non-VoIP/AMR
services. When the value of the
switch is "On", other services
except VoIP/AMR are allowed to
use HS-SCCH Less, otherwise
not allowed.
Downlink Enhanced Layer 2
function or not.
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Off
1: On
N/A
RNC
HSPA Evolution
0: Not Supported
1: Supported
N/A

Uplink Enhanced Layer 2
function or not.
RNC
HSPA Evolution
0: Not Supported
1: Supported
N/A

64QAM function or not.
RNC
HSPA Evolution
0: Not Supported
1: Supported
N/A

MIMO function or not.
RNC
HSPA Evolution
0: Not Supported
1: Supported
N/A
Overload Control
0: Off
1: On
N/A
This parameter is a switch

indicating whether it is supported
or not for Limiting HSDPA GBR
RNC
Resource Consumption when
HSDPA GBR users in bad radio
conditions.
1: Signalling Fixed
Mode, Service
Flexible Mode
2: Signalling and
Conversational
Service Fixed
N/A
1:
Signalling
Mode,
other Fixed
Mode,
ServiceService
Flexible
Flexible
Mode Mode
2:
Signalling
and
3: All
Fixed Mode
Conversational
N/A
Service Fixed
Mode, other
Service Flexible
Mode
3:
Mode
0: All
NotFixed
Supported
N/A
1: Supported

support type of RLC flexible PDU
RNC
size format for signalling and
service.
HSPA Evolution
/HSDPA Packet
Scheduling

support type of RLC flexible PDU
RNC
size format for uplink signalling
and service.
HSPA Evolution

whether RNC supports to
activate Dual Cell and MIMO at
the same time.
RNC
HSPA Evolution
This parameter describes

whether Dual-Cell HS-DSCH is
supported.
RNC
HSPA Evolution
0: Not Supported
1: Supported
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
RNC
Power Control
-63.75..63.75, step
Db
0.25
Power Control
0: Off (Not Need

Dynamic
Adjustment)
1: On (Need
Dynamic
Adjustment)

power offset relative to 2ms TTI
E-HICH in single link condition
for 2ms TTI E-HICH of serving EDCH RLS in macro diversity
condition.
for 10ms E-TTI E-HICH of
serving E-DCH RLS in macro
diversity
condition.
This parameter
indicates the
for 2ms TTI E-HICH of nonserving E-DCH RLS in macro
diversity
condition.
This parameter
indicates the
for 10ms E-TTI E-HICH of nonserving E-DCH RLS in macro
diversity
condition.
This parameter
indicates the
E-RGCH in single link condition
for 2ms TTI E-RGCH of serving
E-DCH RLS in macro diversity
condition.
for 10ms E-TTI E-RGCH of
serving E-DCH RLS in macro
diversity
condition.
This parameter
indicates the
for E-RGCH of non-serving EDCH RLS in macro diversity
condition.
whether dynamic updating of EAGCH power offset is needed or
not.
RNC
N/A
N/A

period to judge whether to adjust
RNC
the HSUPA control channel
number.
Code Resource
Allocation
6..65532, step 6

whether to judge event 1F
condition when the service is
setup on HSPA.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
RNC
Power Control
0..8
N/A
RNC
Power Control
0..8
N/A
RNC
Power Control
0..6
N/A
RNC
Power Control
0..6
N/A
RNC
Power Control
0..8
N/A
RNC
Power Control
1..4
N/A
RNC
Power Control
0..8
N/A

quantified E-DPCCH/DPCCH
power offset configured to 10ms
E-DCH transmission time
interval.
power offset configured to 2ms
This
parameter
indicates
E-DCH
transmission
timethe
power
interval.offset for scheduling
information configured to 2ms ETTI. When no MACd PDUs are
included in the same MACe
PDU,
UE will use
power offset
This parameter
indicates
the
for scheduling
power
offset forinformation
schedulingas
HARQ
power
offset to compute
information
configured
to 10ms
the
transmission
power PDUs
of EE-TTI. When no MACd
DPDCH.
are included in the same MACe
PDU, UE will use power offset
for scheduling information as
HARQ power offset to compute
This
parameter indicates
the transmission
power ofthe
Epower
offset of HS-DPCCH ACK
DPDCH.
domain relative to DPCCH when
UE has a single link or is in the
intra-NodeB handover.
ACK-NACK repetition factor,
indicating the number of
consecutive repetitions of the
ACK and NACK.

power offset of HS-DPCCH
NACK domain relative to
DPCCH when UE has a single
link or is in the intra- NodeB
handover.
This parameter indicates the CQI

feedback cycle, to determine the
time to send CQI. When the
value is 0, the UE does not feed
back the channel quality.
This parameter is a triple array,
each element used in different
load condition, and the
corresponding relations of the
RNC
elements and load level as
follows:
Element 1: low load;
Element 2: medium load;
Element 3: high load.
Where, said load integrated the
uplink load and the number of
HSDPA users.
This
This parameter
parameter indicates
indicates the
the CQI
repetition
factor,
indicating
power offset of HS-DPCCHthe
CQI
number
of consecutive
domain relative
to DPCCH when RNC
repetitions
of thelink
CQI.
UE has a single
or is in the
This
parameter
is a triple array,
intra-NodeB
handover.
RNC
follows:
This
parameter
indicates
Element
2: medium
load; the EDCH
reference
Element
3: highpower
load. offset,
which
usedload
to estimate
thethe
E- RNC
Where,issaid
integrated
DPDCH
power
E-TFCI of
uplink load
and from
the number
without
HSDPA decoding
users. MAC-e PDUs
This
indicates error
the
targetparameter
for TPC command
RNC
HSDPA
associate
compressed
rate, used
for adjusting
SIR
mode
method.
The
value
of
target of F-DPCH.
'Serial ' means that compressed
mode and HSDPA can not be
used
together, ifindicates
HSDPA isthe
used,
This parameter
only when
HS-DSCH->DCH
HSUPA
associate
Compressed RNC
channel
transition
completed
Mode method.
Theisvalue
of
can
the
compressed
mode be
'Serial ' means that compressed
activated.
mode and HSUPA can not be
The
of 'Parallel'
means
usedvalue
together,
if HSUPA
is used,
that
compressed
mode
and
only when HS-DSCH->DCH
RNC
HSDPA can
be used
together.
channel
transition
is completed
can the compressed mode be
activated.
The value of 'Parallel' means
that compressed mode and
HSUPA can be used together
Power Control
0: 0
1: 2
2: 4
3: 8
4: 10
5: 20
6: 40
7: 80
8: 160
9: 16
10: 32
11: 64
ms
Power Control
0..8
N/A
Power Control
1..4
N/A
Power Control
0..6
N/A
Power Control
0.01..0.1, step
0.01
N/A
Handover Control
0: Serial
1: Parallel
N/A
Handover Control
0: Serial
1: Parallel
N/A

power offset of HS-DPCCH ACK
RNC
UE is in inter-Node B handover.
Power Control
0..8
N/A

power offset of HS-DPCCH CQI
RNC
UE is in inter-NodeB handover.
Power Control
0..8
N/A
RNC
Power Control
0..8
N/A
RNC
Handover Control
0..65535, step 1
RNC
Code Resource
Allocation
0: ms
1: s
N/A
RNC
Code Resource
Allocation
100..60000, step
100
ms
RNC
Code Resource
Allocation
1..65535, step 1
RNC
Power
Control/Congestion
Control/HSDPA
Packet
Scheduling/Adimissi
on Control
1: RNC Dynamic
Assigning Mode
2: NodeB
Assigning Mode
N/A
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1
kbps
RNC
Parameter
0..2147483647
N/A
Uplink Enhanced
CELL_FACH
0..8
N/A
Uplink Enhanced
CELL_FACH
0..8
N/A
This
parameter
indicates the
For HSPA,
this parameter
power offset
HS-DPCCH
indicates
the of
minimum
interval
NACK
domain
relative
to cell
between
two HSPA
serving
DPCCH
UE is ,inwhich
interchanges when
or channel
Node
B
handover.
helps to avoid too frequent HSPA
serving cell changes and
channel transition.
For MBMS, this parameter
indicates the minimum interval
between two best cell changes
This
parameter
the to
unit
due to
event 1d indicates
which helps
of
time
period
to
judge
whether
avoid too frequent change
the
code PTP
occupation
ratio
between
and PTM
bearer
satisfies
types. the criteria to adjust the
HS-PDSCH number based on
code
occupationindicates
ratio. the
This parameter
This
parameter
indicates
the the
time period to judge whether
allocation
method
for
HScode occupation ratio satisfies
PDSCH
andtoHS-SCCH
the criteria
adjust the Total
HSPower
(when
HSUPA
is on
notcode
PDSCH number
based
supported)
or
HS-PDSCH, HSoccupation
ratio.
This
parameter
indicates
the
SCCH,
E-AGCH,
E-RGCH
and
time
period
to
judge
whether
E-HICH Total Power (when the
code
occupation
ratio satisfies
HSUPA
is supported),
which is
the
criteria
to
adjust
the HScalled HSPA Total Downlink
PDSCHfor
number
based on
code
Power
convenience.
There
occupation
ratio.
are three methods:
1. RNC Dynamic Assigning
Mode: RNC configures HSPA
Total Downlink Power to Node B
and uses
the value
of HSPA
This
parameter
indicates
the
Total
Downlink
Power
configured
maximum
bit rate
of HS-DSCH
in
OMCR
initial value
across
Iuras
interface.
Thisand
dynamically
adjust
the
HSPA
parameter used by DRNC
to
Total
Downlink
Power
based
adjust code resource, on the on
such
power balance,
other factors
aspect,as
if serving
cell in
power congestion
and overload
DRNC,
this parameter
used in
2.
NodeB
Assigning
Mode: RNC
flow
control
in Iub interface
does not configure HSPA Total
This
parameter
common
Downlink
Poweristothe
Node,
and
EDCH
configuration
object
Node B allocates the powerID.
freely.

power offset configured to 10ms RNC
Common E-DCH transmission
time interval.
power offset configured to 2ms RNC
Common E-DCH transmission
time interval.

power offset for scheduling
information configured to 2ms
TTI Common E-DCH. When no
MACd PDUs are included in the
same
MACe PDU,
UE willthe
use
This parameter
indicates
power
offset
for
scheduling
information
HARQ power
information as
configured
to 10ms
offset
to
compute
the When no
TTI Common E-DCH.
transmission
of E- in the
MACd PDUs power
are included
DPDCH.
same
MACe PDU, UE will use
information as HARQ power
offset to compute the
This
parameter
indicates
transmission
power
of E- the
power
offset
of
HS-DPCCH
ACK
DPDCH.
domain relative to DPCCH for
common E-DCH transmission.
ACK-NACK repetition factor for
common E-DCH transmission, it
indicates the number of
consecutive repetitions of the
ACK and NACK.
NACK domain relative to
DPCCH for common E-DCH
transmission.
feedback cycle for common EDCH transmission, it is used to
determine the time to send CQI.
When the value is 0, the UE
does not feed back the channel
quality.
power offset of HS-DPCCH CQI
domain relative to DPCCH for
common E-DCH transmission.
repetition factor for common EDCH transmission, indicating the
number of consecutive
repetitions of the CQI.
common E-DCH reference
power offset, which is used to
estimate the E-DPDCH power
from E-TFCI without decoding
MAC-e PDUs
This parameter indicates the FDPCH TPC command error rate
target for common E-DCH
transmission, it is used for
adjusting
SIR target
of F-DPCH.
This
indicates
the
This parameter
parameter
indicates
common
E-DCH
transmission
whether the MAC-d flow carrying
time
interval.
DTCH
and the MAC-d flow
According
to theare
specification
carrying DCCH
allowed to be
there
are twoinkind
of E-TTI,
multiplexed
the same
MAC-i
which
are 10ms
and E-DCH
2ms E-TTIs.
PDU when
common
is
10ms
used. E-TTI is mandatory and it
should be supported by all UEs
and all cells which support EDCH and 2ms E-TTI is optional
for cell, is mandatory for UE.
When 2ms E-TTI is supported by
the capability of the Node B, the
value of E-TTI configured in the
OMCR should be used,
otherwise 10ms E-TTI should be
applied.
RNC
Uplink Enhanced
CELL_FACH
0..6
N/A
RNC
Uplink Enhanced
CELL_FACH
0..6
N/A
RNC
Uplink Enhanced
CELL_FACH
0..8
N/A
RNC
Uplink Enhanced
CELL_FACH
1..4
N/A
RNC
Uplink Enhanced
CELL_FACH
N/A
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH
0:
0
0..8
1: 2
2: 4
3: 8
4: 10
5: 20
6: 40
7: 80
8: 160
9: 16
10: 32
0..8
11: 64
RNC
Uplink Enhanced
CELL_FACH
1..4
N/A
RNC
Uplink Enhanced
CELL_FACH
0..6
N/A
RNC
Uplink Enhanced
CELL_FACH
0.01..0.1, step
0.01
N/A
RNC
Uplink Enhanced
CELL_FACH
0: Off
1: On
N/A
RNC
Uplink Enhanced
CELL_FACH
0: 2
1: 10
ms
ms
N/A
This parameter is the logical

channel type indicator for
common E-DCH MAC-d flow.
0: CCCH
1: DCCH
2: DTCH
RNC
Uplink Enhanced
CELL_FACH

HARQ power offset for common
RNC
E-DCH MAC-d flow when 2ms ETTI is used.
Uplink Enhanced
CELL_FACH
0..6
N/A

HARQ power offset for common
RNC
E-DCH MAC-d flow when 10ms
E-TTI is used.
Uplink Enhanced
CELL_FACH
0..6
N/A
RNC
Uplink Enhanced
CELL_FACH
0..15
N/A
RNC
Uplink Enhanced
CELL_FACH
0..15
N/A
RNC
Uplink Enhanced
CELL_FACH
2..1505, Step 1
bytes
RNC
Uplink Enhanced
CELL_FACH
2..1505, Step 1
bytes
RNC
Uplink Enhanced
CELL_FACH
RNC
HSPA Evolution
UTRAN Cell
Parameter
0..2147483647
N/A
UTRAN Cell
Overload Control
0..65535
N/A
UTRAN Cell
Parameter
0..2147483647
N/A

maximum number of
retransmissions for common EDCH MAC-d flow when 2ms ETTI is used.
maximum number of
retransmissions for common EDCH MAC-d flow when 10ms ETTI is used.
RLC PDU in the flexible RLC
PDU size mode used in common
E-DCH.
minimum size in octets of the
RLC PDU in the flexible RLC
PDU size mode used in common
E-DCH.
This
used forthe
This parameter
parameter is
indicates
deciding
delay
of transmitting
spreadingthe
factor
supported
by
'happy
bit' by UE, CELL_FACH.
which is
Uplink enhanced
configured by RNC for UE in
uplink enhanced CELL_FACH
state. RRC configures MAC with
the duration
Happy_Bit_Delay_Condition,
over which to evaluate the
current grant relative to the
TEBS after application of the EThis
is the limiting
TFC parameter
selection procedure.
For
HSDPA
GBR
resource
detailparameter
descriptionindicates
please refers
This
the IDto
consumption
profileGBR
object ID.
TS25.321.
of
Limiting HSDPA
parameters profile. Different
requirements need different
configurations of the parameters.
And corresponding Limiting
HSDPA GBR Resource
Consumption parameters of the
This
parameter
is the
cell can
be indexed
bylimiting
this
HSDPA
GBR resource
parameter.
consumption configuration object
ID.
0: 2SF4
1: 2SF2
2: 2SF2+2SF4
0: 2
1: 10
2: 20
3: 50
4: 100
5: 200
6: 500
7: 1000
N/A
N/A
ms

guaranteed bit rate level number
of HSDPA services for limiting
HSDPA GBR resource
consumption. It is used in
This
parameter
indicates
the
resources
consumption
This
parameter
indicatescontrol
UE HSguaranteed
bit
rate
levels
of limit
of HSDPA
GBR power
services.
DSCH
required
upper
HSDPA
services
for
limiting
for limiting HSDPA GBR resource
HSDPA
GBR resource
consumption,
expressed in the
consumption.
is used
in
form of power Itoffset
of the
resources
consumption
CPICH
power.
When thecontrol
of
HSDPA
GBR of
services.
required
power
UE HSDPA
MAX_NUM_HS_GBR=33.
GBR service is higher than this
threshold, it means that this UE
consuming too much resource,
so it need to limit resource
consumption by this UE. UE HSDSCH required power upper limit
for
HSDPA
GBR resource
Thislimiting
parameter
indicates
MBMS
consumption
corresponds
to
configuration object ID.
hsGBRLev[MAX_NUM_HS_GBR
] one by one, and
MAX_NUM_HS_GBR=33.
whether streaming service is
carried by PTP.

whether background service is
carried by PTP.
13600, 23850,
38800, 64000,
128000, 384000,
1..33
768000, 900000,
1200000,
1800000,
3650000,
4096000,
6144000,
7200000,
8640000,
10100000,
14000000,
17600000,
-35..15, step 0.1
21096000,
42192000
UTRAN Cell
Overload Control
N/A
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
RNC
Parameter
0..2147483647,
Step 1
N/A
RNC
MBMS
0: Off
1: On
N/A
RNC
MBMS
0: Off
1: On
N/A
kbps
bps
dB

minimum rate threshold of the
SCCPCH setup for MBMS.
RNC
MBMS
0: 64
1: 128
2: 256
3: 384
4: 16
5: 32

whether MSCH is supported or
not
RNC
MBMS
0: Off
1: On
N/A
This parameter is the streaming

RNC
traffic frequency converge switch
MBMS
0: Off
1: On
N/A
MBMS
0: Off
1: On
N/A
MBMS
-15..0, step 1
dB
MBMS
-15..0, step 1
dB
This parameter is the

background traffic frequency
RNC
converge switch.
power of SCCPCH used to bear
MTCH information when
RNC
receiving in the soft combining
mode. This parameter is the
This
the
offsetparameter
relative toindicates
the SCCPCH
power
of
SCCPCH
used
to
bear
Power for Single Cell Reception.
MTCH information when
receiving in the selective
RNC
combining mode. This parameter
is the offset related to the
SCCPCH Power for Single Cell
Reception.

threshold to judge if the local cell
is in half-island status. When the
number of neighbouring cells
transmitting the same MBMS
service is less than or equals to
This
parameter
indicates
the the RNC
this threshold
and
larger than
threshold
if the
cell is in
Thresholdtoforjudge
Cell in
Island
island
Whencell
theisnumber
Status,status.
this MBMS
in halfof
neighbouring
cells
that
island
status. The
judgment
transmitting
same
MBMS
result of the the
status
is used
to
service
is the
smaller
than or equals
configure
appropriate
power. RNC
to the Threshold for Cell in Island
Status, this MBMS cell is in
island status. The judgment
This
indicates
resultparameter
of the status
is usedthe
to
switch
of
dropping
MBMS
configure the appropriate power. RNC
service in MBMS overload
controll.
MBMS
0..15
N/A
MBMS
0..15
N/A
MBMS
0: Off
1: On
N/A

whether UEs in URA_PCH state RNC
will be counted or not.
MBMS
0: False
1: True
N/A

whether UEs in CELL_PCH state RNC
will be counted or not.
MBMS
0: False
1: True
N/A
MBMS
0: False
1: True
N/A

whether UEs in CELL_FACH
state will be counted or not.
number threshold used for
switching between PTP and
PTM. If number of UEs obtained
T318
is a timer
whichthan
starts
by counting
is larger
or after
transmission
of
RRC
equals to this threshold, UEs will
CONNECTION
REQUEST
in
be switched between
PTP mode
case
of connection
and PTM
mode.
establishment for MBMS
reception and stops after
reception of RRC CONNECTION
SETUP. When T318 expires, UE
enters idle mode and will not
This
is a switch
sendparameter
RRC CONNECTION
indicating
REQUESTwhether
again. Iub transport
bearer multiplexing is used on
the Iub interface
RNC
RNC
MBMS
RNC
MBMS
RNC
MBMS
0: 250
1: 500
1..64
2: 750
3: 1000
4: 1250
5: 1500
6: 1750
7: 2000
8: 3000
9: 4000
10: 6000
11: 8000
0:
12:Off
10000
1:
13:On
12000
14: 16000
N/A
ms
N/A

RNC
DTX/DRX Profile Object ID.
Parameter
0..2147483647
N/A
This parameter is UE DTX/DRX

configuration Index which
indicates a set of DTX/DRX
parameters. Each service
obtains the DTX/DRX
parameters according to the UE
DTX/DRX configuration index.
HSPA Evolution
1..50
N/A
Parameter
0..2147483647
N/A
Service
Related

RNC
DTX/DRX Profile Object ID.

DTX cycle 1 for 2ms TTI. When
E-DCH TTI is 2ms and UL DTX
mode is active, if UE enters DTX
mode controlled by UL DTX
modeparameter
1, UE will indicates
use the value
This
the UE
indicated
parameter
as
DTX cycleby
1 this
for 10ms
TTI. When
DTX
cycle
1.
modeparameter
use the value
This
the UE
indicated
parameter
as
DTX cycleby
2 this
for 2ms
TTI. When
DTX
cycle
1.
modeparameter
use the value
This
the UE
indicated
parameter
as
DTX cycleby
2 this
for 10ms
TTI. When
DTX
cycle
2.
This
the
modeparameter
controlledindicates
by UL DTX
MAC
DTX
cycle
for
2ms
TTI.
mode 2, UE will use the value
When
UL by
DTX
is active,
indicated
thismode
parameter
as if
no
E-DCH
transmission has
DTX
cycle 2.
been performed for the last MAC
Inactivity
Threshold-1
E-TTIs,
This parameter
indicates
the UE
will
perform
E-TFC
selection
MAC DTX cycle for 10ms TTI.
periodically
in each
DTX if
When UL DTX
modeMAC
is active,
cycle.
When
E-DCH
TTI
is
no E-DCH transmission has2ms,
MAC
cycle equals
to MAC
been DTX
performed
for the last
MAC
DTX
cycleThreshold-1
for 2ms TTI.E-TTIs, UE
Inactivity
This
parameter
indicates
the
will perform
E-TFC
selection
inactivity
threshold
UEDTX
DTX
periodically
in eachfor
MAC
cycle
2
for
2ms
TTI.
If
there
has
cycle. When E-DCH TTI is 10ms,
no
any
E-DCH
transmission
for
MAC DTX cycle equals to MAC
the
of 10ms
E-DCH
TTIs
DTXnumber
cycle for
TTI.
indicated
by thisindicates
parameter,
This parameter
theUE
will use UE
DTX cycle
2 asDTX
DTX
inactivity
threshold
for UE
cycle,
will TTI.
transmit
cycle 2i.e.
forUE
10ms
If there has
DPCCH
burst intransmission
each UE DTX
no any E-DCH
for
cycle
2.
the number of E-DCH TTIs
indicated by this parameter, UE
will use
UE DTXindicates
cycle 2 as
This
parameter
theDTX
UE
cycle,
i.e. UE
will transmit
DTX long
preamble
length.
DPCCH
burst
in each
DTX
When UE
enters
DTX UE
status
cycle
2.
controlled by UE DTX cycle 2, if
there is data to be transmitted on
This
parameter
E-DCH,
UE shallindicates
transmitthe
MAC
inactivity
threshold.
When
DPCCH
firstly
in
the
UE DTX
the
CQI
UL
DTX
mode
is
active,
if
no Elong
preamble
length
slots.
DTX timer. When UE detects
DCH transmission
has been
consistent
control information
performed
theUE
number
of
intended forforthis
and the
continuous
E-TTIs
indicated
by
TFRI value does not correspond
this
parameter-1,
UE
will
perform
to a HS-SCCH order or UE has
E-TFC
selection
periodically
successfully
decoded
HS- in
each MACintended
DTX cycle.
PDSCHs
for this UE,
UE will start CQI DTX timer.
When CQI DTX timer is running,
When
UE enters
mode
CQI report
priorityDTX
will be
higher
controlled
by
UE
DTX
cycle
than DTX priority. When CQI1,
UE
transmit
burst
DTXshall
timer
expires,DPCCH
CQI report
in
each will
DTX
The DTX
length
priority
becycle
lower1.than
of
uplinki.e.
DPCCH
burstonly
shalltakes
priority,
CQI report
equals
thetimeslots
number of
of non
the
place intothe
subframes
indicated by this
DPCCH gap.
parameter.
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 4
2: 5
3: 8
4: 10
5: 16
6: 20
0: 1
1:
0: 5
4
2:
1: 10
5
3: 8
20
2:
3: 10
4: 16
5: 20
6: 32
7: 40
8:
0: 64
5
9:
1: 80
10
10:
128
2: 20
11:
160
3: 40
4: 80
0:
5: 1
160
1: 4
2: 5
3: 8
4: 10
5: 16
6: 20
0: 5
1: 10
2: 20
0: 1
1: 4
2: 8
3: 16
4: 32
5: 1
64
0:
6:
1: 128
4
7:
2: 256
8
3: 16
4: 32
5: 64
6: 128
7: 256
0: 2
1:
0: 4
1
2:
1: 15
2
2: 4
3: 8
4: 16
0:
5: 0
32
1:
6: 1
64
2:
7: 2
128
3:
8: 4
256
4:
9: 8
512
5:
10:16
Infinity
6: 32
7: 64
8: 128
9: 256
0:
10:1512
1:
11:2Infinity
2: 5
subframe
subframe
subframe
subframe
subframe
subframe
TTI
TTI
slot
TTI
subframe
subframe
When UE enters DTX mode

controlled by UE DTX cycle 2,
UE shall transmit DPCCH burst
in each DTX cycle 2. The length
of uplink DPCCH burst shall
equals to the number of the
subframes indicated by this
parameter.
After UE enters downlink DRX
mode, UE shall detect HS-SCCH
When
does not
detect
in eachUE
number
of subframes
consistent
control
information
indicated by this parameter.
intended for this UE or the
received TFRI value does not
correspond to a HS-SCCH order
or UE hasn't successfully
decoded HS-PDSCHs intended
for
this
UE forislast
number of
After
E-DCH
scheduled,
UE
subframes
indicated
by this of
shall monitor the full E-AGCH
parameter,
shallcell
enters
the E-DCH UE
serving
and Edownlink
RGCH
(s)DRX
of allstatus.
cells in the EDCH active set for the number of
E-TTIs
indicatedindicates
by this
This parameter
parameter.
whether UE monitors the full EAGCH of the serving cell when
the start of the E-AGCH or ERGCH transmission overlaps
with an HS-SCCH reception
subframe.
This parameter is the power
control profile related to service
object ID.
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 2
2: 5
0: 4
1: 5
2: 8
0:
3: 0
10
1:
4: 1
16
2:
5: 2
20
3: 4
4: 8
5: 16
0:
6: 0
32
1:
7: 1
64
2:
8: 2
128
3:
9: 4
256
4:
10:8512
5: 16
6: 32
7: 64
8: 128
9:
0: 256
False
1: True
subframe
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
Service
Related
HSPA Evolution
UTRAN Cell
and Service
Related
Parameter
0..2147483647
N/A
This parameter is the service

related power control parameters
UTRAN Cell
profile ID. Each cell obtains the
and Service
service related power control
Related
parameters according to this
parameter.
Power Control
0..65535
N/A

initial load scene for the
parameters in SrvPcProfile.
UTRAN Cell
Parameter
0: Normal Load
Cell
1: High Load Cell
N/A
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
and Service
Related
Parameter
0..65534
N/A
UTRAN Cell
and Service
Related
Power Control
1: Algorithm 1
2: Algorithm 2
N/A
UTRAN Cell
and Service
Related
Power Control
1..2
dB

control related to service object
ID.
This parameter indicates the sub
service type, used for numbering
for each sub service. 0...5 are
used for signalling service;
6...250 are used for single
service.
Odd number
is which
This parameter
indicates
configured
for
downlink
service;
uplink inner loop power control
even
number
is
configured
for
algorithm is used. For algorithm
uplink
1
innerservice
loop power control is
done every time slot. For
This
parameter
the
algorithm
2 innerindicates
loop power
TPC
step
size for
uplink
inner
control
is done
every
5 time
loop
slots.power control. Only when
inner loop power control
algorithm 1 is selected, this
parameter needs to be
configured. For algorithm 2,
default value of TPC step size is
1 and this parameter is not
needed.
subframe
subframe
TTI
N/A
as
when it so
becomes
setpossible
asymmetrically
there are
worse
and decrease
two parameters
usedthe
separately.
communication
quality
slowly
This parameter is
a 9-element
when
becomes
better
(toinmake
array, iteach
element
used
itdifferent
more reliable),
the steps
ofthe
load condition,
and
increasing
and
decreasing
are
This
parameter
indicates
the
set
asymmetrically
so
there
elements and load level as are
maximum
step ofused
decreasing
the
two
parameters
separately.
follows:
uplink
SIR
target.
This
parameter
is a 9-element
Element
1: low load,
golden
This
is a 9-element
array,
each element
used in
user;parameter
array,
each
element
inuser;
different
load
condition,
and
the
Element
2: low
load, used
silver
This
parameter
indicates
the
different
load
condition,
and
corresponding
relations
of
the
This
parameter
indicates
the
Element 3: low load, bronze the
transport
channel
BLER
quality
corresponding
relations
of
the
elements
and
level
as
maximum
stepload
size
of increasing
user;
target,
which
is
the
base
of
outer
elements
and
load
level
as
follows:
the
uplink4:SIR
target.load, golden
Element
medium
loop
power
control.
For
the
follows:
Element
1: low load,
golden
This
is a 9-element
user;parameter
service
with
more
than
onein
Element
1:
load,
golden
user;
array,
each
element
used
Element
5: low
medium
load,
silver
subflow,
this
parameter
user;
Element
2:
low
load,
silver
different
load condition, is
anduser;
the
user;
applied
for
the
first
Element
load,
silver
user;
Element
3:
low
load,subflow.
bronze
corresponding
relations
ofbronze
the
Element 2:
6: low
medium
load,
Signalled
value
is Log10
Element
3:and
lowload
load,
bronze
user;
elements
level
as
user;
(Transport
channel
BLER
quality
user;
Element
golden
follows:
Element 4:
7: medium
high load,load,
golden
target),
i.e.
physical
value
P in
Element
4:
medium
load,
golden
user;
Element
1: low load, golden
user;
TS
25.331
is
Log10
(actual
user;
Element
5:
medium
load,
silver
user;
Element 8: high load, silver user;
value);
scalar
value
D silver
inuser;
TS
Element
5:
user;
Elementthe
2:
low
silver
9: medium
highload,
load,load,
bronze
25.331
is
P*10;
value
configured
user;
6: low
medium
bronze
Element
3:
load,load,
bronze
user.
in
database=
D+63; load,
acutual
Element
6: medium
bronze
user;
This
parameter
indicates
the
value
configured
through
manuser;
7: medium
high load,load,
golden
Element
4:
golden
error
transport
machine
interface
in number
the
Element
7:
highblock
load,
golden
This
parameter
indicates
the
user;
threshold
in the
outer
loop
power
background=10^P,
listed
in
user;
step
size8:
fo
downlink
inner
Element
high
load,
silver
user;
5:
medium
load,
silver
control
using
threshold
algorithm.
exponential
form,
see
the
table
Element
8:
load,
silver
user;
loop
power
control.
Normally,
the
Element
9: high
high
load,
bronze
user;
When
number
ofperiod
error
blocks
in
value
range.
Element
9:
high
load,
bronze
When
the
tolerance
is not
value
inthe
good
channel
condition
user.
Element
6:
medium
load,
bronze
exceeds
threshold
within
a is
user.
over,
the the
number
error
block
is
smaller
than
in of
bad
channel
user;
period,
RNC
shall
increase
the
Method
of7:calculation:
exceed
the
errorload,
blockgolden
threshold,
condition.
Element
high
SIR
target
immediately.
BLEREVAL=1:
63;
then
adjust
the
SIRtarget
user;
This
parameter
is atolerance
9-element
BLER=10.^
( (BLEREVALupward;
when
the
Element
8: high
load,used
silver
array,
each
element
inuser;
63)/10);
period
is 9:
arrived,
the number
of
Element
high
load,
bronze
This
parameter
indicates
the
different
load
condition,
and
the
S=[BLEREVAL;
BLER]'
error
block
isHARQ
smaller
than
error
user.
threshold
of
failure
corresponding
relations
of the
This
parameter
isthen
ato9-element
block
threshold,
adjust
the
indication
number
increase
elements
and
load
level
asin
array,
each
element
used
SIRtarget
downward,
else
do
SIR
target when E-TTI=2ms. If
follows:
different
load
condition,
and the
nothing.
the
times
HARQ
failure
Element
1:oflow
load,
golden
corresponding
relations
of thethe
This
parameter
is
a
9-element
exceeds
the threshold
within
This
parameter
indicates
the
user;
elements
and
load
level
as
array,window,
each element
usedincrease
in
time
RNC
shall
threshold
HARQ
failure
Element
2:oflow
load,
silver
user;
follows:
different
load
condition,
and
the
the
SIR
target.
It
is
only
indication
number
to bronze
increase
Element
3:
low
load,
Element
1:
low
load,
golden
corresponding
relations
of
the
applicable
for theE-TTI=10ms.
services
SIR
targetand
when
If
user;
user;
elements
load level as
carried
on
E-DCH.
the
times
of
HARQ
failure
Element
4:
medium
load,
golden
Element
2: low load,
silver user;
follows:
This
parameter
is a 9-element
exceeds
thelow
threshold
within the
user;
Element
3:
load,
bronze
1:
golden
array,
each
element
used
in
time
window,
RNC
shall
increase
Element
5: medium
load,
silver
user;
This
parameter
indicates
the
different
load
condition,
and
the
the
SIR
target.
It
is
only
user; of
4:HARQ
medium
load,
golden
number
retransmission
Element
2:
low
load,
silver
user;
corresponding
relations
of
the
applicable
for
Element
6:
medium
load,
bronze
user;
(NHR)
threshold
toservices
increase
Element
3:and
lowthe
load,
bronze
elements
load
level
as SIR
carried
on
E-DCH.
user;
Element
5: medium
load, silver
target
when
E-TTI=10ms.
When
user;
follows:
This
parameter
is
athe
9-element
Element
7:
high
load,
golden
user;
the
NHR
exceeds
threshold,
Element
4:
medium
load,
golden
Element
1: low
load,
golden
array,
each
element
used
in
user;
This
parameter
indicates
the
Element
6:increase
medium
load,
bronze
RNC
shall
the
SIR
user;
user;
different
load
condition,
and
the
Element
8:
high
load,
silver
user;
number
of
HARQ
retransmission
user;
target.
It
is
only
applicable
for
the
Element 2:
5: low
medium
load,
silver
Element
load,
silver
user;
corresponding
relations
of
the
Element
9:
high
load,
bronze
(NHR)
threshold
to decrease
SIR
Element
7:
high
load,
golden
services
carried
on
E-DCH.
user;
Element
3:and
low
load,
bronze
elements
load
user.
target
when
E-TTI=10ms.
When
user;
This
parameter
is alevel
9-element
Element
6: medium
load,asbronze
user;
follows:
the
NHR
is
less
than
the
Element
8:
high
load,load,
silver
array,
each
element
used
inuser;
user;
Element
4:
medium
golden
Element
1:
low
load,
golden
threshold,
RNC
shall
decrease
9:
bronze
different
load
condition,
and
the
Element
7:
high
load,
golden
user;
user;
the
SIR target. relations
It is only of the
user.
corresponding
user;
Element
5:for
medium
load,
silver
Element
low
load,
silver
applicable
the
services
elements
load
level
asuser;
Element 2:
8:and
high
load,
silver
user;
user;
Element
3:
low
load,
bronze
carried
on9:E-DCH.
follows:
Element
high
load,load,
bronze
Element
6:
medium
bronze
user;
This
parameter
is a 9-element
Element
1: low load,
golden
user.
user;
Element
4:
medium
load,
array,
each
element
used golden
in
user;
Element
7: high
load, golden
user;
different
load
condition,
and
the
Element
2: low load, silver user;
user;
Element 3:
5: low
medium
load,
corresponding
relations
ofsilver
the
Element
load,
bronze
Element
8:and
high
load,
silver
user;
elements
load
level
as user;
user;
Element
9:
high
load,load,
bronze
Element
6:
medium
follows:
Element
4: medium load, bronze
golden
user.
user;
Element
1: low load, golden
user;
Element
load,load,
golden
user;
Element 7:
5: high
medium
silver
user;
Element
2:
low
load,
silver
user;
user;
8: low
highload,
load,load,
silver
user;
Element
bronze
Element 3:
6:
medium
bronze
Element
9: high load, bronze
user;
user;
user.
Element
golden
Element 4:
7: medium
high load,load,
golden
user;
user;
Element
silver
Element 5:
8: medium
high load,load,
silver
user;
user;
Element 9: high load, bronze
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
UTRAN Cell
and Service
Related
Power Control
21:
6.3095734448019
33e-005
22:
7.9432823472428
17e-005
23:
0.1..0.5, step 0.1
1.0000000000000
00e-004
24:
1.2589254117941
68e-004
25:
0.1..0.5, step 0.1
1.5848931924611
15e-004
26:
1.9952623149688
77e-004
0.1..1,
step 0.1
27:
2.5118864315095
80e-004
28:
3.1622776601683
0.1..1,
step 0.1
80e-004
29:
3.9810717055349
74e-004
30:
5.0118723362727
0.5..2
26e-004
31:
6.3095734448019
30e-004
32:
7.9432823472428
03e-004
33:
1.0000000000000
00e-003
1..50,
34: Step 1
1.2589254117941
68e-003
35:
1.5848931924611
14e-003
1..65535, Step 1
36:
1.9952623149688
78e-003
37:
2.5118864315095
0..255
79e-003
38:
3.1622776601683
79e-003
39:
0..255
3.9810717055349
72e-003
40:
5.0118723362727
24e-003
41:
0..15, step 0.01
6.3095734448019
28e-003
42:
7.9432823472428
16e-003
0..15, step 0.01
43:
1.0000000000000
00e-002
44:
1.2589254117941
68e-002
45:
1.5848931924611
dB
dB
dB
dB
dB
N/A
TBs
TBs
N/A
N/A
N/A
N/A
(NHR)
threshold
to decrease
services
carried on
E-DCH. SIR
target
when E-TTI=2ms.
When
This parameter
is a 9-element
This
parameter
indicates
the
NHR
is
less
than
the
array, each element used the
in
hreshold
ofRNC
sample
threshold,
shallnumber
decrease
different load
condition,
and to
the
increase
SIR target
when
the
SIR target.
It is only
corresponding
relations
ofEthe
TTI=10ms.
The
SIR
target
applicable
for
the
services
elements and
load
level
ascan
not
be
increased
unless
the
carried
follows:on E-DCH.
sample
number
no
less
than
This
parameter
is
a
9-element
indicates
the the
Element 1: low load,
golden
threshold.
When
HARQ
array,
each
element
used
in to
threshold
of sample number
user;
retransmission
or
failure
is
different
load
condition,
and
the
decrease
SIR
target
when
Element 2: low load, silver Euser;
recorded
once
then
sample
corresponding
of the
TTI=10ms.
Therelations
SIR atarget
canis
Element 3:
low
load,
bronze
obtained.
And load
if find
no HARQ
elements
and
level
as
not
be decreased
unless
the
user;
retransmission,
it
also
isthan
athe
This
parameter
indicates
follows:
sample
no less
the
Elementnumber
4: medium
load,
golden
sample.
hreshold
ofWhen
sample
number
Element
1:
low
load,
golden to
threshold.
HARQ
user;
This
parameter
is failure
a when
9-element
increase
SIR
target
Euser;
retransmission
or
Element
5:
medium
load,issilver
array,
each
element
used
in
TTI=2ms.
The
SIR
target
can
not
Element
2:
low
load,
silver
user;
recorded
once
then
a
sample
is
user;
different
load
condition,
and
the
be
increased
unless
the
sample
Element
3:
low
bronze
obtained.
ifload,
find load,
no
HARQ
Element
6:And
medium
bronze
corresponding
number
user;
retransmission,
itthan
alsothe
isof
a the
user; no lessrelations
This
parameter
indicates
the
elements
and
load
level
as
threshold.
When
HARQ
Element
golden
sample.
Element 4:
7: medium
high load,load,
golden
threshold
of
sample
number
to
follows:
retransmission
or
failure
is
user;
This
user;parameter is a 9-element
decrease
SIR
target
when
E- is
Element
1:
low
load,
golden
recorded
once
then
a
sample
Element
5:
medium
load,
silver
array,
each
element
used
in
TTI=2ms.
Thecondition,
target
canthe
not
user;
obtained.
ifSIR
find
HARQ
user;
different
and
Element load
9:And
high
load,no
bronze
be
decreased
unless
the
sample
Element
2:
low
load,
silver
user;
This
parameter
indicates
the
retransmission,
it also
isof
abronze
Element
6: medium
load,
corresponding
relations
the
user.
number
no
less
than
the as
Element
3:and
low
bronze
BER
forload
aload,
physical
sample.
user; target
elements
level
threshold.
HARQ
user;
channel
in
Valid
Time
Windows
This
parameter
a 9-element
Element
7:When
high is
load,
golden
follows:
retransmission
or
failure
isgolden
Element
4:
medium
load,
when
the
FP
mode
is
silent,
array,
each
element
used
in
user;
Element 1: low load, golden
recorded
once
then
a
sample
is
user;
which
is the
base
of outer
loop
different
load
condition,
and
the
Element
8: high
load,
silver
user;
user;
obtained.
And
if
find
no
HARQ
Element
5:
medium
load,
silver
power
control
method
using
corresponding
of the
9: low
highrelations
load,silver
bronze
Element
2:
load,
user;
This
parameter
indicates
retransmission,
it BER.
also
is as
athe
user;
physical
channel
elements
and
load
level
user.
Element
3:
low
load,
bronze
BER
target
for is
a physical
sample.
Element
6: medium
If
QE-Selector
setload,
to bronze
follows:
user;
channel
out
Valid
Time
Windows
This
parameter
is
a
9-element
user;
"Selected"
and
the
transport
Element
1:
low
load,
golden
Element
4:FP
medium
load,
golden
when
the
Mode
is
normal,
array,
each
element
used
in
Element
7: high
load, golden
channel
BER
is available
the
user;
user;
which
is
the
base
of
outer
loop
different
load
condition,
and
the
user;
transport
channel
BER
shall
be
Element
2:
low
load,
silver
user;
Element
5:
medium
load,
silver
power
control
method
using
corresponding
relations
of
the
Element
8:
high
load,
silver
user;
the
base
for
the
QE
in
the
UL
3: low load, bronze
user;
physical
channel
BER.
elements
level
as
Element
9:
high
load,
bronze
data
frames.
Ifload
no
transport
user;
Element
6:and
medium
load,
bronze
This
parameter
indicates
the
If
QE-Selector
is
"Selected"
and
follows:
user.
channel
BER
is
available
for
the
Element
4:
medium
load,
golden
user;
number
threshold
of
physical
the
transport
channel
BER
is
Element
1:
low
load,
golden
selected
DCH,
the
physical
user;
Element
7:
high
load,
channel
BER
less
thangolden
or equal
available
the
transport
channel
user;
channel
BER
shall
be
used
for
Element
5:
medium
load,
silver
user;
BER
target
in
the
uplink
outer
BER
shall
be
the
base
for
the
Element
low
load,
silver
user;
the
QE.
If2:
the
QE-Selector
isuser;
set
user;
Element
8:
high
load,
silver
loop
power
control
QE
based
QE
in the3:
UL
data
frames.
If no
Element
low
load,
bronze
to
"Non-selected",
the
physical
Element
6:
medium
load,
bronze
Element
9:
high
load,
bronze
algorithm.
When
the
number
of
transport
channel
BER
is for
user;
channel
BER
shall
be used
user;
user.
physical
channel
BER
less
than
available
for
the
selected
DCH,
Element
4:
medium
load,
golden
the
QE inBER
the
UL
data
frames.
Element
7:
high
load,
golden
or
equal
target
isBER
greater
the
physical
channel
shall
user;
When
mixed
services
are
used,
user;
than
or equal
toQE.
the number
of
be
used
for
the
If
the
QEElement
5:
medium
load,
silver
the
combination
method
is to
Element
8:RNC
high shall
load,
silver
user;
threshold,
decrease
Selector
is
toload,
"Non-selected",
user;
take
the target
minimum
value
among
Element
9: set
high
bronze
the
SIR
immediately.
the
physical
channel
BERvalues
shall
Element
6:
medium
load,
bronze
all
the
qePhychBerTarSil
user.parameter is a 9-element
This
be
used
for
the
QE
in
the
UL
user;
of
the each
mixedelement
services.
array,
used in
data
frames.
When
Element
7:
high
load,
golden
This
parameter
is
a mixed
9-element
different
load
condition,
and the
services
areelement
used, the
user;
array,
each
used
inthe
corresponding
relations
oftake
combination
method
issilver
to
Element
8:
high
load,
user;
different
load
condition,
and
the
elements
andvalue
load level
as all
the minimum
among
the
Element
9:
high
load,
bronze
corresponding
relations
of
the
follows:
the
qePhyBerTarNorm
values
of the
user.
elements
and
load
level
as
Element
1:
low load,
golden
transport
block
number
threshold
This
parameter
indicates
the
mixed
services.
follows:
user;
for
BER
target
adjust
in
fast
error
transport
block
number
Element
1:
low
load,
golden
Element
2:for
low
load,
silver
user;in
OLPC
SIR
target
downward
threshold
BER
target
adjust
user;
Element
3:
low
load,
bronze
adjustment
based
on
BER.
If the
fast
OLPC
SIR
targetsilver
downward
Element
2:
low load,
user;
user;
transport
block
number
is not
adjustment
based
on
BER.
If the
Element
3:
low
load,load,
bronze
Element
4:error
medium
golden
larger
than
the
berTbThresh
and
number
of
blocks
is
larger
user;
user;
error
transport
block
number
is
than
the
threshold
within
a
Element
4:
medium
load,
golden
Element
5:
medium
load,
silver
not
larger
than
the
period,
the BER target will be
user;
user;
berErrorTbThresh,
the BER
decreased.
Element
medium
Element
6:be
medium
load,
bronze
target
will5:
kept. If load,
the silver
user;
This
parameter
indicates
user;
transport block number isthe
larger
Element
6:
load,
bronze
step
the
BER
Element
7: medium
high load,
golden
than of
thedecreasing
berTbThresh
and
the
user;
target
in fast OLPC
targetis
user; transport
error
blockSIR
number
Element
high
load,
downward
adjustment
baseduser;
on
Element
8:than
highthe
load, golden
silver
not
larger7:
user;
BER.
When
the
quality
of traffic
Element 9: high load,
berErrorTbThresh,
thebronze
BER
Element
8:be
high
load,bad,
silver
user;
channel
becoming
the
user. willis
target
adjusted
depending
Element
9:
high
load,
bronze
BER
target
will
be
decreased
on the BER target adjusting by
user.
a
step one
time
to decrease
the
trigger
cause:
if the
trigger cause
possibility
of SIR
targetthe BER
is SIR target
increase,
decreasing
to the BER
target will bedue
decreased,
or else
based
OLPC
algorithm.
the BER
target
will be increased.
UTRAN Cell
and Service
Related
Power Control
0..15, step 0.01
N/A
UTRAN Cell
and Service
Related
Power Control
0..15, step 0.01
N/A
UTRAN Cell
and Service
Related
Power Control
0..255
N/A
UTRAN Cell
and Service
Related
Power Control
0..255
N/A
UTRAN Cell
and Service
Related
Power Control
0..255
N/A
UTRAN Cell
and Service
Related
Power Control
0..255
N/A
UTRAN Cell
and Service
Related

0..100, step 0.1
use
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
1..20
N/A
UTRAN Cell
and Service
Related

0..10, Step 1
use
TBs
UTRAN Cell
and Service
Related

0..100, Step 1
use
TBs
UTRAN Cell
and Service
Related

0..50
use
N/A

whether uplink outer loop power
control (OLPC) based on
This
parameter
indicates
the
SIRtarget
adaptive
down step
step
of
increasing
the
BER
target
size is used or not.
in
fast
OLPC
SIR
target
This parameter is a 9-element
downward
based
array, eachadjustment
element used
in on
BER. When
quality of
traffic
different
loadthe
condition,
and
the
channel
is becoming
good,
the
corresponding
relations
of the
BER
target
willload
be increased
elements
and
level as by a
step
one
time
to
increase
the
follows:
possibility
of
SIR
target
decreasing
due to the BER
user;
based OLPC
algorithm
Element
2: low
load, silver user;
This
parameter
indicates
Element
3: low load,
bronze
whether
uplink
outer
loop
power
user;
control
(OLPC)
based
on
QE
Element
4:
medium
load,
golden
maximum BER target in fast is
used
nottarget
in Valid
Time
user;
OLPCorSIR
downward
Windows
if
the
FP
Mode
issilver
Element 5: medium
adjustment
based onload,
BER.
This
silent.
When
the
OLPC
based
user;
parameter value is used to giveon
the
BLER
ismedium
invalid,
OLPC
based
Element
6:for
load,
bronze
the
range
BER
target
in
This
parameter
indicates
thethe
Eon
the
physical
channel
BER
can
user;
BER
based
OLPC
algorithm.
minimum
BER
target
in
fast
DCH
HARQ
power
offset
FDD,
be used. 7: high load, golden
Element
OLPC
SIR
target
downward
which
is
used
toiscompute
the
This
a 9-element
user;parameter
adjustment
based
onused
BER.
quantized
factor
ed
ofThis
Earray,
each
element
in
Element
8:gain
high
load,
silver
user;
parameter
value
is
used
to
DPDCH.
For
detail
descriptions
different
condition,
andgive
the
Element load
9: high
load, bronze
the
range
fortoBER
targetofinthe
the
please
refer
TS25.214.
corresponding
relations
user.
BER
based
OLPC
algorithm.
This
parameter
is
a
9-element
array,
each element used in
follows:
different
condition,
and the
Element load
1: low
load, golden
corresponding
relations of the
user;
elements
level
asuser;
Element 2:and
lowload
load,
silver
follows:
Element 3: low load, bronze
Element
1: low load, golden
user;
This
parameter indicates uplink
user;
Element
4:up
mediumsize
load,
SIR
target
forgolden
R99.
Element
2: lowstep
load, silver
user;
user;
This
parameter
is
a
9-element
Element
3:
low
load,load,
bronze
Element
5:
medium
silver
array,
user;
user;
different
load
condition,
and
the
Element
4:
load,
golden
Element
6: medium
medium
load,ofuplink
bronze
the
This
parameter
indicates
corresponding
relations
the
user;
user;
additional
SIR
target
down
step
SIR
targetand
up step
size
for
elements
load
level
assilver
Element
5:
medium
load,
Element
7:
high
load,
golden
size
of
the
SIR
target
rapid
HSUPA
(2ms
E-TTI).
follows:
user;
user;
convergence
function.
This
parameter
is a 9-element
Element
1:
load,
golden
Element
6: low
medium
bronze
Element
8:
high
load,load,
silver
array,
each
element
used
inuser;
user;
user;
Element
9:
high
load,
bronze
different
load
condition,
and
the
Element
2:
load,
user;
This
parameter
indicates
uplink
Element
7: low
highrelations
load,silver
golden
user.
corresponding
of the
Element
3:
low
load,
bronze
SIR
target
up
step
size
for
user;
elements
and load level as
user;
HSUPA
(10ms
Element
8: highE-TTI).
load, silver user;
follows:
Element
4:
medium
load,
golden
This
parameter
is
a 9-element
Element
9:
high
load,
bronze
Element
1: low
load,
golden
user;
array,
each
element
used
in
user.
user;
Element
5: medium
load,and
silver
different
load
condition,
the
This
parameter
indicates
the
Element
2: low relations
load, silver
user;
user;
corresponding
of the
target
number
of
HARQ
Element
3:
low
load,
bronze
Element
6:and
medium
load,
elements
load
level
asbronze
retransmission.
user;
user;
follows:
This
parameter
is a 9-element
Element
4:
golden
7: medium
high
load,load,
golden
Element
1:
low
load,
golden
array,
each
element
used
in
user;
user;
different
load
condition,
and
the
This
parameter
indicates
the
Element 8:
5:
medium
silver
Element
load,load,
silver
user;
2: high
low relations
load,
silver
user;
corresponding
of(2ms
the
target
rate
of
error
frame
Euser;
9:and
high
load,
bronze
Element
3:
low
load,
bronze
elements
load
level
asbronze
TTI).
Element
6:
medium
load,
user.
user;
follows:
This
parameter
is a 9-element
user;
Element
4:
medium
load,
golden
Element
1:
low
load,
golden
array,
each
element
in
Element
7:
high
load,used
golden
user;
user;
different
load
condition,
and
the
user;
Element 2:
5: medium
load, silver
Element
load,
user;
corresponding
of the
Element 8: low
highrelations
load,silver
silver
user;
user;
Element
3:
low
load,
bronze
elements
load
level
asbronze
Element
9:
high
load,
bronze
Element
6:and
medium
load,
user;
follows:
user.
user;
Element
4:
medium
load, golden
Element
1:
Element
7: low
highload,
load,golden
golden
user;
user;
user;
Element 2:
5: medium
load, silver
Element
Element 8: low
highload,
load,silver
silveruser;
user;
user;
Element
3:
low
load,
bronze
Element
9:
high
load,load,
bronze
Element
6:
medium
bronze
user;
user.
user;
Element 4: medium load, golden
Element
7: high load, golden
user;
user;
Element 5: medium load, silver
user;
Element
load,load,
bronze
Element 9:
6: high
medium
bronze
user.
user;
Element 7: high load, golden
UTRAN Cell
and Service
Related

0..50
use
N/A
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
UTRAN Cell
and Service
Related

0..155
use
N/A
UTRAN Cell
and Service
Related

0..155
use
N/A
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
Service
Related
Power Control
0..6
N/A
UTRAN Cell
and Service
Related
Power Control
0..2, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0..50
N/A
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
different load condition, and the

This
parameterrelations
indicatesofthe
corresponding
the
BER
target
upload
threshold.
elements
and
level as
This
parameter is a 9-element
follows:
array,
each
element
in
Element
1: low
load, used
golden
different
load
condition,
and
the
user;
corresponding
relations
of
the
Element
2: low load,
silverthe
user;
This
parameter
indicates
elements
load
level
as
Element
3:and
low
load,
bronze
BER target
down
threshold.
follows:
user;parameter is a 9-element
This
Element
1:
load,load,
golden
Element
4: low
medium
golden
array,
each
element
used
in
user;
user;
different
Element
load,load,
silver
user;
Element 2:
5: low
medium
corresponding
relations
ofsilver
the
Element
3:
low
load,
bronze
user;
elements
and load level as
user;
Element
follows: 6: medium load, bronze
Element
4: low
medium
golden
user;
Element
1:
load,load,
golden
user;
user;
Element
5:
user;
Element
2: medium
low load,load,
silversilver
user;
user;
8: low
highload,
load,bronze
silver user;
Element 3:
Element
6:
bronze
Element
9: medium
high load,load,
bronze
user;
user;
user.
user;
user;
Element
8: high indicates
load, silver
This
theuser;
user;parameter
Element
9:
high
load,
bronze
time
window
size
in
the
BER
Element 6: medium load, bronze
user.
algorithm.
user;
user;
Element
8: high indicates
load, silver
This parameter
theuser;
TTI
Element 9:ofhigh
load,BER
bronze
threshold
opening
user.
algorithm
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..8, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..200
N/A
This parameter indicates the TTI UTRAN Cell

threshold of closing BER
and Service
algorithm
Related
Power Control
0..200
N/A
UTRAN Cell
and Service
Related
Power Control
1..20
N/A
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
RNC
Parameter
0..2147483647
N/A
Service
Related
Parameter
0..65534
N/A
Service
Related
VIP QoS Guarantee 0.1..0.5, step 0.1
dB
Service
Related
VIP QoS Guarantee 0.1..0.5, step 0.1
dB
This parameter indicates The

number threshold of trigging
SIRtarget adjustment
The switch for priority outer loop
power control. OLPC includes
two parts: normal OLPC and
priority OLPC. The normal OLPC
should be used default, the
priority OLPC is optional: 0: Off;
1: On.
Power
Control Related
to the
This
parameter
indicates
Service
Object ID the uplink SIR
step
of increasing
This
indicates
targetparameter
for white list
users. the
In sub
service
type,
used
for
numbering
order to restore communication
for
eachassub
service.
0...5 are
quality
soon
as possible
when
for siganlling
service;
itused
becomes
worse and
decrease
6...250
are used forquality
single slowly
the
communication
This
parameter
indicates
the
service.
Odd
number
is (to
when
it decreasing
becomes better
make
step
of
the
uplink
SIR
configured
for downlink
service;
ittarget
morefor
reliable),
the
steps
of
white
list
users.
In
even
number
configured are
for
increasing
andisdecreasing
order
to
restore
communication
uplink
service
set
asymmetrically
so
there
are
quality as soon as possible when
two
parameters
used
separately.
it becomes worse and decrease
This
parameter is a quality
triple array,
the communication
slowly
each
element
used
in
different
when it becomes better
(to make
load
condition,
it more
reliable),and
thethe
steps of
corresponding
of the
increasing
and relations
decreasing
are
elements
and load level
as are
set asymmetrically
so there
follows:
two parameters used separately.
Element
1: low load;
This parameter
is a triple array,
Element
2: medium
load;
each element
used in
different
Element
3:
high
load.
follows:

maximum step of decreasing the
uplink SIR target for white list
users.
This
parameterand
indicates
load condition,
the the
maximum
step relations
size of increasing
corresponding
of the
the
uplink and
SIR load
target.
elements
level as
This
parameter is a triple array,
follows:
This
parameter
indicates
each
element
in different
Element
1: lowused
load;
whether
uplink
outer
loop the
power
load
condition,
and
the
This
parameter
indicates
control
(OLPC)
based
on
corresponding
of the
maximum
DPCH
Element 3:downlink
highrelations
load.
SIRtarget
adaptive
down
steplist
elements and
load level
as
transmission
power
for white
size
is
used
or
not
for
white
follows:
users. When performing thelist
users.
Element
low loop
load;power
downlink 1:
inner
This
parameter
istransmission
a triple
array,
Element
2:
medium
load; the
control,
the
new
This
parameter
indicates
each
element
used
in different
Element
3:
high
load.
power
must
be
smaller
than
or
minimum
downlink
load
condition,
and DPCH
the DPCH
equal
to
the
configured
transmission
power
for white
list
corresponding
relations
of the
Maximum
DL performing
Power.
If the
newly
users.
When
the
elements
and
load level power
as
computed
transmission
is
downlink
inner
loop power
follows:
larger than
the
configured
DPCH
control,
the
new
transmission
Element 1:DL
lowPower,
load; make it
Maximum
power
must
be largerload;
than or
Element
2: medium
equal
to
the
configured
DPCH
equal
to
the
configured
Element
3:DL
high
load. DPCH
Maximum
Power.
Minimum DL Power. if the newly
This
parameter
is a triplepower
array,
computed
transmission
This
parameter
indicates
the is
each
element
used
in
different
smallerfactor
than the
configured
quality
ofand
the
UL DPCCH
load
condition,
the
DPCH
Minimum
DL
Power,
make
PILOT
domain
for
white
listthe
corresponding
relations
of
itusers.
equal
to
the
configured
DPCH
This
parameter
indicates
the
It isand
used
forlevel
calculating
elements
load
as for
Minimum
DL
power.
maximum
allowed
UL power
the
UL
DPCCH
power
offset for
a
follows:
This
parameter
is
a triple array,
white
list
users.
When
newly
white
user
accessed
call.
Element
1: the
lowused
load;in inner
each
element
different
performing
uplink
loop
This
parameter
is a triple
Element
2:
medium
load; array,
load
condition,
and
the
power
control, used
the newly
each
element
in
different
Element
3:transmission
highrelations
load. power
corresponding
the of
calculated
load condition,
and the of
elements
and
load
level
as
UE
may
be
over
the
Maximum
This
parameter
indicates
the
follows:
allowed
UL
TXload
power,
in as
such
elements
and
level
initial
SIR
target
for
white
list
Element
1:
low
load;
case
the
UE
can
only
transmit
follows:
users.
The
SIR
isUL
theTX
Element
2: target
medium
load;
with
Maximum
allowed
Element
1:
low
load;
standard
to high
perform
the uplink
Element
load.load;
power.
Element 3:
2:
medium
inner
loop
power
control.
This
parameter
a triple The
array,
Element
3: high is
load.
value
has effect
on the
each element
used
in different
The
indicates
convergence
of thethe
power
load parameter
condition,speed
and
the
This
parameter
indicates
the
transport
channel
BLER
quality
control.
corresponding relations of
the
maximum
uplink
target
for
target
for white
list
which
This
parameter
isSIR
ausers,
triple
array,
elements
and
load
level
as
white
list
users,
which
is
used
to
is
the
base
of
outer
loop
power
each
element
used
in
different
follows:
give
the
range
for
the
target
SIR
control.
For
the
service
with
load
condition,
and
the
of
the than
outer
loop
power
control.
more
subflow,
this
corresponding
relations
of the
Element
2:one
medium
load;
This
parameter
is
a
triple
array,
parameter
is
applied
for
the
first
elements
load
level as
This
parameter
indicates
the
Element
3:and
high
load.
each
element
used
in
different
subflow.
follows:
minimum uplink SIR target for
load
theis used to
Signalled
value
is
Log10
Element
low and
load;
whitecondition,
list 1:
users,
which
corresponding
relations
of quality
the
(Transport
BLER
Element
2: channel
medium
load;
give
the range
for
the
target
SIR
elements
load
level
asP in
target),
i.e.
physical
value
Element
3:and
high
load.
of
the outer
loop
power
control.
follows:
TS
is Log10
(actual
This25.331
parameter
is a triple
array,
Element
1: scalar
lowused
load;
value);
the
value
D in TS
each element
in different
Element
medium
load;
25.331
is2:P*10;
value
configured
load condition,
and
the
Element
3:
high
load.
in
database=
D+63;
acutual
This
parameter
indicates
the
value
configured
through
manelements
and load
level as
error
transport
block
number
machine
follows: interface in the
threshold
outer
loop
power
background=10^P,
listed
in
Element 1:inlow
load;
control
using
threshold
algorithm
exponential
form,
see
the
Element 2: medium load; table
for
whiterange.
listhigh
users.
When the
in
value
Element
3:
load.
number of error blocks exceeds
the
threshold
within a period,
Method
of calculation:
RNC
shall
increase
BLEREVAL=1: 63; the SIR
target
immediately.
BLER=10.^
( (BLEREVALThis
parameter is a triple array,
63)/10);
each
element used
in different
S=[BLEREVAL;
BLER]'
corresponding
the
This parameterrelations
is a tripleofarray,
elements
and
load
level
as
follows:
Element
1: low relations
load;
corresponding
of the
Element
medium
load;as
elements2:and
load level
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
Service
Related
VIP QoS Guarantee
12:
7.9432823472428
20e-006
13:
1.0000000000000
00e-005
14:
1.2589254117941
0.1..1, step 0.1
66e-005
15:
1.5848931924611
14e-005
16:
0.1..1,
step 0.1
1.9952623149688
80e-005
17:
2.5118864315095
81e-005
0:
18:Off
1:
On
3.1622776601683
82e-005
19:
3.9810717055349
66e-005
-35..15, step 0.1
20:
5.0118723362727
22e-005
21:
6.3095734448019
-35..15, step 0.1
33e-005
22:
7.9432823472428
17e-005
23:
-30..30, step 0.1
1.0000000000000
00e-004
24:
1.2589254117941
68e-004
25:
-50..33, step 1
1.5848931924611
15e-004
26:
1.9952623149688
77e-004
-8.2..17.3, step
27:
0.1
2.5118864315095
80e-004
28:
3.1622776601683
-8.2..17.3, step
80e-004
0.1
29:
3.9810717055349
74e-004
30:
-8.2..17.3, step
5.0118723362727
0.1
26e-004
31:
6.3095734448019
30e-004
32:
7.9432823472428
03e-004
33:
1.0000000000000
00e-003
1..50,
34: Step 1
1.2589254117941
68e-003
35:
1.5848931924611
14e-003
36:
1.9952623149688
78e-003
dB
dB
N/A
dB
dB
dB
dBm
dB
dB
dB
N/A
TBs
users. When the tolerance

period is not over, the number of
error block is exceed the error
block
threshold,indicates
then adjust
This parameter
thethe
SIRtarget
upward;
when
the
threshold of HARQ failure
tolerance
arrived,
the
indication period
numberisto
increase
number
of for
error
block
smaller
SIR
target
white
listisusers
than
block threshold,
then
whenerror
E-TTI=10ms.
If the times
adjust
the
SIRtarget
downward,
of
HARQ
failureindicates
exceeds the
the
This
parameter
else
do
nothing.
threshold
within
the
time
window,
threshold
of HARQ
This
parameter
is a failure
triple
array,
RNC
shallnumber
increase
the
SIR
indication
toin
increase
each
element
used
different
target.
It is for
only
applicable
for the
SIR
white
list users
load target
condition,
the
services
carriedand
onIfE-DCH.
when
E-TTI=2ms.
the
times
corresponding
relations
ofarray,
the of
This
parameter
is a triple
HARQ
failure
exceeds
the
elements
and load
level
as
each
element
used
different
This
parameter
indicates
the
threshold
within
the in
time
window,
follows:
load
condition,
and
the
number
of
HARQ
retransmission
RNC
shall
the SIR
Element
1:increase
low relations
load;
corresponding
of the
(NHR)
threshold
to decrease
target.
It
is
only
applicable
forSIR
the
Element
2:
medium
load;as
elements
and
load
level
target
forcarried
white
list
users
when
services
on
E-DCH.
Element
3:
high
load.
follows:
E-TTI=10ms.
When
the NHR
is
This parameter
is a triple
array,
Element
1:
low
load;
less
the
threshold,
RNC
eachthan
element
used
in different
This
parameter
indicates
the
Element
2:HARQ
medium
load;
shall
decrease
the
SIR
target. It
load condition,
andretransmission
the
number
of
Element
3:
high
load.
is
only
applicable
for
the
corresponding
relations
ofservices
the
(NHR)
threshold
to increase
SIR
carried
on
E-DCH.
elements
and load
level as
target
for white
list users
when
is a triple
array,
This
parameter
indicates
the
follows:
E-TTI=10ms.
When
the NHR
each
element
used
different
threshold
oflow
sample
Element
1:
load;innumber
exceeds
the
threshold,
RNC to
load
condition,
andSIR
the
increase
SIR
target
for
white list
Element
2:
medium
load;
shall
increase
the
target.
It is
corresponding
relations
ofThe
the
users
when
E-TTI=10ms.
Element
3: high
load.
only
applicable
for
the services
elements
level
as
SIR
target
canload
not be
increased
carried
onand
E-DCH.
follows:
unless
the
sample
number
no
is a triple the
array,
Element
1:
low
load;
less
than
the
threshold.
When
each element
used innumber
different
threshold
of sample
to
Element
2:SIR
medium
load;
HARQ
retransmission
failure
load
condition,
and the
decrease
target
fororwhite
list
Element
3: high
load.
is
recorded
once
then a of
sample
corresponding
relations
the
users
when
E-TTI=10ms.
The
is
obtained.
And
if find
noasHARQ
elements
load
level
SIR
targetand
can
not
be
decreased
retransmission,
it also
is a no
follows:the sample
unless
number
sample.
Element
low
load;
less
than1:
the
threshold.
When
is a triple
array,
This
parameter
indicates
the
Element
2: medium
load;
HARQ
retransmission
or failure
each
element
used
in
different
number
of
HARQ
retransmission
Element
3:
high
load.
is recorded once then a sample
load
condition,
theno HARQ
(NHR)
threshold
decrease
SIR
is obtained.
Andand
iftofind
corresponding
the
target
for whiterelations
list
users
retransmission,
it also
isof
awhen
elements
load level
as is
E-TTI=2ms.
the NHR
sample. andWhen
follows:
less
than
the
threshold,
RNC
is a triple the
array,
Element
1:HARQ
lowused
load;
shall
the
SIR
target. It
each decrease
element
in different
number
of
retransmission
Element
2: medium
load;
is
only
applicable
the services
load
condition,
and
the
(NHR)
threshold
toforincrease
SIR
Element
3:
high
load.
carried
on
E-DCH.
corresponding
relations
of
the
target
for
white
list
users
when
This
parameter
indicates
the
This
parameter
is alevel
triple
array,
elements
and
load
as
E-TTI=2ms.
When
the
NHR
threshold
of
sample
number
to
each element
used in different
follows:
exceeds
the
threshold,
RNC
increase
SIR
target
for
white
load
condition,
and
thetarget. list
Element
1: low
load;
shall
increase
the
SIR
It is
users
when
E-TTI=2ms.
The
corresponding
relations
of
theSIR
Element
2:
medium
load;
only
applicable
for
the
services
target
canand
not load
be increased
elements
level as
Element
high load.
carried
on3:E-DCH.
unless
the
sample
number no
follows:
is a tripleWhen
array,
This
parameter
indicates
the
less
than
the
threshold.
Element
1:
load;innumber
each element
used
different
threshold
oflow
sample
to
HARQ
retransmission
or
failure
Element
2:SIR
medium
load;
load
condition,
and
the
decrease
target
fora white
list
is
recorded
once
then
sample
Element
3: high
load. of
corresponding
relations
theSIR
users
when
E-TTI=2ms.
is obtained.
And
if find noThe
HARQ
elements
level
target
canand
not load
beit decreased
retransmission,
also
is as
a
follows:
unless
the
sample
number
no
sample.
Element
1:
low
load;
less
than
the
threshold.
When
is a triple array,
Element
2: medium
load;
HARQ
retransmission
or failure
each
element
used
different
whether
uplink
outerin
loop
power
Element
3:
high
load.
is
recorded
once
then
a
load
condition,
and
the
control (OLPC) based onsample
QE is
is
obtained.
And
if valid
find no
corresponding
relations
ofHARQ
the
used
or not in
the
time
retransmission,
it
also
is
aif the
elementsforand
load
window
white
listlevel
useras
sample.
follows:
FP
Mode is silent. When the
This
parameter
isthe
a triple
Element
1: low
OLPC
based
onload;
BLERarray,
is
each
element
used
in
different
Element
2:
medium
load;
invalid, OLPC based on
the
load
condition,
thecan be
Element
3: highand
load.
transfer
channel
BER
corresponding
relations of the
used.
elements
and load
This parameter
is alevel
tripleas
array,
follows:
Element
1: low and
load;the
load condition,
Element
2:
medium
load;of the
corresponding relations
Element 3:and
high
load.
elements
load
level as
follows:
Service
Related
VIP QoS Guarantee 1..65535, Step 1
TBs
Service
Related
N/A
Service
Related
N/A
Service
Related
VIP QoS Guarantee 0..15, step 0.01
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
N/A
Service
Related
VIP QoS Guarantee
0: Off
1: On
N/A
available the transport channel

BER shall be the base for the
QE in the UL data frames. If no
This
parameter
indicates
transport
channel
BER is the
number
of physical
availablethreshold
for the selected
DCH,
channel
BERchannel
less than
or equal
the physical
BER
shall
BER
target
uplink
be used
for in
thethe
QE.
If theouter
QEloop
power
control
BER based
Selector
is set
toindicates
"Non-selected",
This
parameter
the Ealgorithm
for
white
users.
the physical
BER
shall
DCH
HARQ channel
power list
offset
FDD
When
thefor
number
be used
the
QEof
inphysical
the is
ULused
for
white
list
users,
which
channel
BER
less
than
or gain
equal
data
frames.
When
mixed
to compute
the
quantized
BER
target
is
greater
than
or
services
are
used,
the
factor ed of E-DPDCH. For
equal
to the number
of
threshold,
combination
method
is to
take
detail
descriptions
please
refer to
RNC
shall decrease
the SIRall the
the minimum
value among
TS25.214.
target
immediately.
QePhychBerTarSil
of the
This
parameter is avalues
triple array,
This
is a in
triple
array,
mixedparameter
services.
each
element
used
different
each
element used
in
different
This
parameter
is a the
triple
array,
load condition,
and
load
condition,
and
the
each
element
used
in
different
corresponding
relations
load condition,
and level
the of
elements
and load
asthe
elements
and load
level of
asthe
corresponding
relations
follows:
follows:
elements1:and
level as
Element
lowload
load;
Element
load;load;
follows: 1:
Element
2: low
medium
Element
2:
This
parameter
indicates
Element
1:
low
3: medium
highload;
load.load; the
This
parameter
indicates
the
Element
3:
high
load.load;
additional
SIR
target
down
step
Element
2:
medium
Note: Now, the E-DCH
HARQ
initial
value
for
BLER
based
size
of offset
the
target
Element
3: SIR
high
load. rapid
power
is related
to theSIR
target
the level
SIR
target rapid
convergence
function.
defaultinload
convergence
function.
DefaultLoadLevel. That means
This
parameter
is apower
triple offset
array, is
the E-DCH
HARQ
each
element
used
in
different
This
parameter
indicates
the
EdchHarqPOFdd[DefaultLoadLe
load
and the SIR
initial
value for additional
vel]. condition,
corresponding
relations
of the
target in the SIR target rapid
elements
and
load
level
convergence function. as
follows:
Element
1: lowused
load;in different
each element
Element
2: medium
load;
load
condition,
and
the
This
parameter
indicates
uplink
Element
3:
high
load.
corresponding
relations
of the
SIR target up step
size for
R99.
elements
and load
This parameter
is alevel
tripleas
array,
follows:
Element
1: low and
load;the
load condition,
Element
2: medium
load;ofuplink
This
parameter
indicates
corresponding
relations
the
Element
3:
high
load.
SIR
targetand
up step
elements
load size
levelfor
as
HSUPA
follows: (2ms E-TTI).
This
parameter
is a triple array,
Element
1: low load;
each
element
used
different
Element 2: medium in
load;
load
condition,
and
the
Element
3:
high
load.
This parameter indicates uplink
corresponding
relations
of the
SIR target up step
size for
elements(10ms
and load
level as
HSUPA
E-TTI).
follows:
Element
1: lowused
load;in different
each element
Element
2:
medium
load;
load
condition,
and
the
This
parameter
indicates
the
Element
3:
high
load.
corresponding
relations
target number of
HARQ of the
retransmission.
follows:
Element
1: lowused
load;in different
each element
Element
2:
medium
load;
load
condition,
and
the
This
parameter
indicates
the
Element
3:
high
load.
corresponding
relations
the Etarget rate of error
frameof(2ms
TTI).
follows:
Element
1: lowused
load;in different
each element
Element
2:
medium
load;
load
condition,
and
the
This
parameter
indicates
the
Element
3:
high
load.
corresponding
relations
the
target rate of error
frameof(10ms
E-TTI).
follows:
Element
1: lowused
load;in different
each element
Element
2:
medium
load;
Element
3:
high
load.
follows:
Element 3: high load.
Service
Related
Service
Related
N/A
Service
Related
N/A
Service
Related
Power Control
0..2, step 0.1
dB
Service
Related
Power Control
-8.2..17.3, step 0.1 dB
Service
Related
Power Control
-8.2..17.3, step 0.1 dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0.0..5.0, step 0.1
dB
UTRAN Cell
and Service
Related
Power Control
0..50
N/A
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1

BER target up threshold.
corresponding
the
This parameterrelations
indicatesofthe
elements
and
load
level
as
BER target down threshold.
follows:
Element
1: lowused
load;in different
each element
Element
2:
medium
load;
Element 3: highrelations
load. of the
corresponding
follows:
Element
2: medium
load; The
This parameter
indicates
Elementthreshold
3: high load.
number
of trigging
SIRtarget adjustment

control related to service and
diversity
mode object
ID. the
This
parameter
indicates
maximum downlink DPCH
transmission
power.
When
This parameter
indicates
the
performing
the
downlink
innerby
transmit diversity mode used
loop
power
control, mode
the new
this set
of diversity
and
transmission
power
must
be
service related
power
control
smaller
than or equal to the
parameters.
configured DPCH Maximum DL
Power. If the newly computed
transmission power is larger than
the configured DPCH Maximum
DL Power, make it equal to the
configured DPCH Maximum DL
Power.
This
parameter
is aDPCH
9-element
minimum
downlink
array,
each
element
transmission power. used
Whenin
different load
the
performing
thecondition,
downlinkand
inner
corresponding
relations
of the
loop power control,
the new
elements
andpower
load level
transmission
mustas
be
follows:
larger than or equal to the
Element
1: DPCH
low load,
golden DL
configured
Minimum
user; if the newly computed
Power.
Element 2: low
load,issilver
user;
transmission
power
smaller
Element
3: low load,DPCH
bronze
than
the
configured
This
user;
Minimum
DL between
Power, make
it
power
offset
the golden
DL
Element
4: medium
load,
equal
to
the
configured
DPCH
DPCH
TFCI domain and the
user;
Minimum
DLdomain.
power.
DPCH
data
Element
5: medium
load, silver
This
parameter
is
This
parameter
is a
a 9-element
9-element
user;
array,
each
element
used
in
array,
each
element
used the
in
This
parameter
indicates
Element
6: medium
load,
bronze
different
load
condition,
and
the
different
load
condition,
and
the
power
offset between
the
DL
user;
corresponding
relations
of
the
corresponding
relations
of
the
DPCH
TPC
domain
the
Element
7:and
high
load,and
golden
elements
load
elements
and
load level
level as
as
DPCH
data
domain.
user;
follows:
follows:
This
parameter
is
a 9-element
Element
8: low
highload,
load,
silver user;
Element
1:
golden
Element
1:
low
load,
golden
array,
each
element
in
Element 9: high load,used
bronze
user;
user;
different
load
condition,
and
the
user.
Element
2:
load,
user;
Element
2: low
low relations
load, silver
silver
user;
corresponding
of
the
Element
3:
low
load,
bronze
Element
3:and
lowload
load,
bronze
elements
level
as
user;
user;
follows:
Element 4:
4: medium
medium load, golden
golden
Element
Element
1: low load,load,
golden
user;
user;
user;
Element
5:
medium load,
silver
Element
5:
Element
2: medium
low load,load,
silversilver
user;
user;
user;
Element
3:
low
load,
bronze
Element
6:
Element
6: medium
medium load,
load, bronze
bronze
user;
user;
user;
Element
4:
medium
load,
golden
Element 7:
7: high
high load,
load, golden
golden
Element
user;
user;
user;
Element
5:
medium
load, silver
Element
8:
Element
8: high
high load,
load, silver
silver user;
user;
user;
Element
9:
high
load,
bronze
Element
9:
high
load,
bronze
Element
user.
user.
user;
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
0..100, step 0.1
UTRAN Cell
and Service
Related
Power Control
1..20
N/A
UTRAN Cell
and Service
Related
Parameter
0..2147483647
N/A
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
0: None
1: STTD
2: Closed Loop
Mode 1
N/A
UTRAN Cell,
Service and
Diversity
Mode Related
-35..15, step 0.1
dB
UTRAN Cell,
Service and
Power Control /
Diversity
Admission Control
Mode Related
-35..15, step 0.1
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
0..6, step 0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
0..6, step 0.25
dB
Power Control
/Handover
Control /AMR-NB &
AMR-WB
array, each element used in

follows:
user;
Element 2: low load, silver user;
Element
3: low load,
bronze
This parameter
indicates
the
user;
quality factor of the UL DPCCH
Element
4: medium
PILOT domain
whichload,
is a golden
user;
constant used for calculating the
Element
5: medium
load,for
silver
UL DPCCH
power offset
a
user;
newly accessed call.
Element
6: medium
load, bronze
This parameter
is a 9-element
user;
Element
7: high
load, golden
different load
condition,
and the
user;
Element
high
load,
silver
elements8:and
load
level
as user;
Element
9:
high
load,
bronze
This
parameter
indicates
the
follows:
user.
maximum
allowed
UL
power
used
user; to limit the maximum
transmission
power
the UE.
Element 2: low
load,ofsilver
user;
When
performing
thebronze
uplink
Element
3: low load,
inner
loop power control, the
user;
newly
calculated
transmission
Element
medium
load,
golden
initial SIR4:target
of the
uplink
power
of
UE
may
be over the
user;
physical channel. The target SIR
Maximum
UL
TX power,
Element
5:allowed
medium
load,
silver
is
the standard
to perform
the
in
such case the UE can only
user;
uplink inner loop power control.
transmit
with
Maximum
allowed
Element
medium
bronze
The value6:has
effectload,
on the
UL
TX
power.
user;
convergence speed of the power
This
parameter is a 9-element
Element
control. 7: high load, golden
array,
user;
different
load
condition,
anduser;
the
Element
8: high
load,used
silver
array, each
element
in
corresponding
relations
of the
Element
9:
high
load,
bronze
elements
and load level as
user.
follows:
follows:
user;
This
parameter
indicates
the
Element
1: low load,
golden
Element
2:uplink
low load,
silver
maximum
target
SIR,user;
user;
Element
3: lowtoload,
which
is used
give bronze
the range
Element
2: low load,
silver
user;
user;
for
the
target
SIR
of the
outer
Element 3: low load,
bronze
Element
4: medium load, golden
loop
user;power control.
user;
This
parameter
is a 9-element
Element
4: medium
load, golden
Element
5: medium load, silver
array,
user; each element used in
user;
different
condition,
the
Element load
5: medium
load,and
silver
Element
6: medium
load,ofbronze
corresponding
relations
the
user;
user;
elements
load level
Element 6:and
medium
load,asbronze
Element
follows:
user;
user;
Element
Element 1:
7: low
highload,
load,golden
golden
Element
8: high load, silver user;
user;
user;
Element
9:
highload,
load,silver
bronze
Element
2:
user;
Element
8: low
high indicates
load, silver
This
parameter
theuser;
user.
Element
3:
low
load,
bronze
Element
9:
high
load,
bronze
minimum uplink target SIR,
user;
user.
which is used to give the range
for the target SIR of the outer
user;
loop power control.
user;
user;
user;
follows:
Element 9: high load, bronze
user;
user.
Element 2: low load, silver user;
user;
user;
user;
user;
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
0..6, step 0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-30..30, step 0.1
dB
Power Control
/AMR-NB & AMRWB
-50..33, step 1
dBm
Power Control
-8.2..17.3, step
0.1
dB
UTRAN Cell,
Service and
Power Control
Diversity
/Handover Control
Mode Related
-8.2..17.3, step
0.1
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-8.2..17.3, step
0.1
dB
UTRAN Cell,
Service and
Diversity
Mode Related
UTRAN Cell,
Service and
Diversity
Mode Related

power offset relative to DL DPCH
pilot domain configured for EAGCH in 2ms E-TTI.
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB

pilot domain configured for EAGCH in 10ms E-TTI.
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-32..31.75, step
0.25
dB
UTRAN Cell,
Service and
MBMS
Diversity
Mode Related
-35..5, step 1
dB
UTRAN Cell,
Service and
MBMS
Diversity
Mode Related
-8..0 , step 1
dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-8.2..17.3, step 0.1 dB
UTRAN Cell,
Service and
Power Control
Diversity
Mode Related
-8.2..17.3, step 0.1 dB

pilot domain configured for ERGCH in 2ms E-TTI and single
link condition.
pilot domain configured for ERGCH in 10ms E-TTI and single
link condition.
pilot domain configured for EHICHparameter
in 2ms E-TTI
and single
This
indicates
the
link condition.power of the
transmission
SCCPCH
used for
bearring
This parameter
indicates
the
MTCH
information
when
the
cell
power offset relative
to DL
DPCH
is
in island
pilot
domainstatus.
configured for EUE
can
the same
service
HICH
in receive
10ms E-TTI
and single
from
multiple neighbouring cells
link condition.
transmitting the same MBMS
This
parameter
indicates
services
and benefit
from the
the
initial
value
for
BLER
based SIR
soft combining or selective
target
in thewhich
SIR target
rapid
combining,
requires
less
This parameter
indicates
the
convergence
function.
SCCPCH power
transmission
power.
SCCPCH
for
cell
in
halfThis
is a 9-element
But
inparameter
the
case
when
none ofthe
island
status.
RNC
shall
array,
each
element
useduse
in the
This
parameter
indicates
the
neighbouring
cells
transmits
power
configured
by thisand
different
load
condition,
the
initial
value
additional
SIR
same
services,
UEthat
is inthe
island
parameter
inforcase
cell is
corresponding
relations
of
the
target
inand
theRNC
SIR target
rapid
status,
shall
use
the
in
half-island
which
elements
andstatus
loadby
level
asmeans
convergence
function.
power
configured
this
few neighbouring cells are
follows:
This
parameter
is
athe
9-element
parameter
tothe
meet
QoS
transmitting
same
MBMS
Element
1: low
load,
golden
array,
each
element
used
requirements
of
the
MBMS
service
and
gain
of
soft
orin
user;
different
load
condition,
and the
service.
selective
combining
small.
Element
2:
low relations
load,issilver
user;
corresponding
of the
Element
3:
low
load,
bronze
user;
follows:
Element
golden
Element 4:
1: medium
low load,load,
golden
user;
user;
Element
Element 5:
2: medium
low load,load,
silversilver
user;
user;
Element
user;
user;
Element
4: medium load, golden
Element
user;
user;
Element
5: medium
load, silver
This
parameter
Element
8: high indicates
load, silver user;
user;
reference
to Module
object.
Element
load,load,
bronze
Element 9:
6: high
medium
bronze
user.
user;
user;parameter indicates Proc
This
ElementNumber
8: high that
load,the
silver
user;
Instant
NODEB
Element to.
9: high load, bronze
belongs
user.
RNC
Parameter
N/A
RNC
Equipment
1..DBS_RR_MAX_
N/A
NUM_PROC
N/A
Parameter
0: General NodeB
1: Pico Node B
N/A
2: Home NodeB

control method to share the HSPDSCH channelization codes
Node B
among the cells of the same
NodeB.
Code Resource
Allocation
0: Not Sharing
1: RNC Control
N/A

whether Node B supports HSDSCH congestion detection.
Node B
Overbooking on Iux
0: Not Supported
1: Supported
N/A
Node B
HSUPA Packet
Scheduling
0: Not Supported
1: Supported
N/A
Node B
RAN Transmission
Overview /Handover
0: 20
Control /HSUPA
1: 100
Packet
2: 400
Scheduling/Admissi
on Control
ms
Node B
RAN Transmission
Overview /HSUPA
Packet Scheduling
0..100, Step 1
ms
Node B
Code Resource
Allocation
5..65535, step 5
Node B
Power Control
0: None
1: Common
N/A
Node B
Node B
Management
200..65535, Step
1
100ms
Node B
Node B
Management
0: May
1: Must
2: Must not
N/A
NodeB
NodeB
Management
100..65535, Step
1
100ms
RNC
Node B
Management
0..500, Step 1
100ms

Node B type.

whether Node B supports E-DCH
congestion
detection.
This parameter
indicates the Iub
interface satellite transport
delay.There are three time delay
levels: 20ms (Low Earth Orbit
and Terrestrial transmission),
100ms (Medium Earth Orbit
transmission), 250ms
(Geostationary
Orbitthe Iub
This parameter Earth
indicates
transmission).
interface transport delay jitter.
Radio network lay user-plane will
add jitter to TOAWS in FP
SETUP procedure.
period to update the HS-PDSCH
code number to share for each
one
the cells indicates
of the same
This of
parameter
the
NodeB.
balancing type of the DL power,
which can take the value of
None, Common or Individual.
None indicates there is no need
to balance the DL power.
Common indicates to balance
the
power and
the balanced
ThisDL
parameter
indicates
the
radio
links
use
the
power.
audit timer of Nodesame
B resource.
According to the timer, RNC
When
exists
a radio
audits there
resource
in Node
B link
and
needs to build another radio
periodically.
link, this parameters indicates
whether
radiooflink
Specifiesthe
thecurrent
time delay
and
the
existing
radio
link will be
deleting cell resource when
combined
in
Node
B.
If
Node B is unreachable.they are
combined,
radiothe
linklink
willofuse
Start:
RNC the
detects
the
Iub interface
resource
of the
transport
layer between
RNC
existing
radio
link
and
not
setup
This
parameter
indicates timer
and NodeB
is disconnected.
new
anylink
more.
length
ofconnection
delay
process
when
Stop:FP
RNC
detects
the
of
ATM
link
broken.
transport layer between RNC
Start:
WhenisNBNM
received AAL
and NodeB
restored.
link
brokenRNC
indication,
the cell
timer
At expiry:
will delete
is
started. about the NodeB
resources
Expiration:
NCP link layer
broken,
which link ofIf transport
is
NBNM
notified
NBLOMM
that
disconnected.
NCP is unavailable; If CCP link
broken, NBNM notified NBLOMM
that CCP is available
Stop: When NBNM received AAL
establish confirm indication, the
timer is killed.
Node B
This parameter indicates timer

length of delay process when IP
link broken.
Start: When NBNM received
association link broken
indication, the timer is started.
Expiration:
NCP
broken,for
Share
ModeIf of
CElink
Resource
NBNM
notified NBLOMM
RNC
Multi-Operators:
Mode 0 that
NCP
is
unavailable;
If
CCP
link
indicates" Minimal CE
broken,
NBNM
notified
Percentage
should
be NBLOMM
that
CCP
is
available
guaranteed for operators
Stop:
When
NBNM received
whether
CE Resource
is
associationor
link
establish
congested
not";
Mode 1confirm Node B
indication,
indicates " the timer is killed.
Minimal CE Percentage should
be guaranteed for operators only
when CE Resource is
CE
Share Switch for Carrier
congested"
Node B
Sharing
Node B
Management
RAN Sharing
/Admission Control
RAN Sharing
/Admission Control
0: Minimal CE
0..500,
Stepshould
1
100ms
Percentage
be guaranteed for
operators whether
CE Resource is
congested or not
1: Minimal CE
N/A
Percentage should
be guaranteed for
operators only
when CE
0:
Off
Resource
is
N/A
1:
On
congested
DPI
0: Not support
DPI-SPI change
1: Support DPISPI change
N/A
N/A
N/A
N/A
N/A
Associated UtranCell List
N/A
N/A
N/A
N/A
BandWidth of Iub Interface
N/A
N/A
0..65535, step 1
Minimal percent of CE can be

used by the PLMN for RAN
Sharing while carrier sharing,
which can not be occupied by
other operator (PLMN)
Node B
RAN Sharing
/Admission Control
0..100, step 0.1
RNC
QoS Guarantee
N/A
N/A
NE Office
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
N/A
N/A
RNC
Parameter
0..2147483647
N/A
Parameter
0..65535
N/A

NodeB support DPI-SPI change NE Office
or not
Associated NodeB

Type Index
Transport layer Qos Profile

parameter mapping Index for
each Iub adjacent NE.
This parameter is UTRAN

Registration Area Object ID
UTRAN registration area ID. One

cell can belong to at most four
URAs (MAX_URA=4). Different UTRAN Cell
UE that resides in this cell can
belong to different URA.

Traffic Volume Measurement
Profile Object ID.
RNC
Parameter
0..2147483647
N/A
This parameter indicates traffic

volume measurement profile
identity
RNC
Dynamic Radio
Bearer Control
0..9
N/A
RNC
Parameter
0..2147483647
N/A
This
This parameter
parameter indicates
indicates the
the UE
RLC
of the
traffic volume
Trafficmode
Volume
Event
measurement
report. If the value
is
AM
RLC,
RNC
can request UE
Object ID for RACH.
for retransmission after receiving
the error SDU label (not
continuous). If the value is UM
RLC, the retransmission is not
required. Usually, report the
results of the important
measurements in AM mode and
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
of theof
(to reduce the quantity
traffic volume
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
the system capacity).
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
'Average RLC buffer payload' or
'Variance of RLC buffer payload'.
whether the report of RLC buffer
payload for each radio bear is
requested or not.
0: Acknowledged
Mode RLC
1:
N/A
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

whether the report of average of
UTRAN Cell
RLC buffer payload for each
radio bear is requested or not.
Dynamic Radio
Bearer Control
0: False
1: True
N/A

whether the report of variance of
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event

number of UE traffic volume
UTRAN Cell
This
measurement.
event
identity ofindicates
the trafficthe
This parameter
volume
measurement
performed
reporting threshold of event
4A
by
UE.
and 4B for traffic volume
Where
measurement on RACH channel. UTRAN Cell
MAX_UE_TRV_MEAS_EVENT
If the traffic volume becomes
is the maximum
number of
larger
than the threshold
of UE
event
traffic
volumeofmeasurement
4A, a report
4A event will be
event,
which
to 2.
triggered;
andequals
if the traffic
volume becomes smaller than
UTRAN Cell
the threshold of event 4B, a
report of 4B event will be
triggered.
Where
is the maximum number of UE
traffic volume measurement
event, which equals to 2.
Dynamic Radio
Bearer Control
Dynamic Radio
Bearer Control
Dynamic Radio
Bearer Control
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10: 4K
11: 6K
12: 8K
13: 12K
14: 16K
15: 24K
16: 32K
17: 48K
18: 64K
19: 96K
20: 128K
N/A
N/A
bytes
when the event generation is

detected and still meets all
requirements of event triggering
after Time to trigger, the event
can
triggeredindicates
and reported.
Thisbe
parameter
the
The
larger
the
value
is, theThis
pending time after trigger.
stricteris the
judgment
forwhen
the a
timer
started
in the isUE
event
to be triggered.
Thebeen
measurement
report has
parameter
beevent.
set The
triggered byshould
a given
according
to
the
actual
UE is then forbidden to send
requirements.
Sometimes,
new measurement
reports if it is
set
too
large,
the
quality
of calls
triggered by the same event
may decrease.
during
this time period, instead
Where
the
UE
waits until
the timer
This
parameter
indicates
expires.
whether
Tx interruption
is
theparameter
maximum
numberafter
of
UE
Where
This
indicates
the
trigger
is
configured
or not.
traffic
volume
measurement
time
of prohibiting transmitting
Where
event,
which
equals
to
2.of traffic
is theon
maximum
number
UE
data
RACH.
Only
when
traffic
volume
measurement
volume
measurement
is on
is the maximum
number
of UE
event,
which
equals
to 2. be
RACH,
can this
parameter
traffic volume
measurement
configured
and
its
configuration
is optional. If the transport
channel to be measured is DCH,
this parameter doesn't need to
be configured.
Where
This
This parameter
parameter indicates
indicates the
the UE
is
themode
maximum
number
of UE
RLC
of the
traffic volume
Traffic
Volume
Period
traffic
volume measurement
measurement
Measurement
Configuration
event,
which
equals
2.
is
AM
RLC,
RNC
cantorequest
UE
Object ID for RACH.
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
of theof
traffic volume
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
only valid when the
requested or not.
0: 0
1: 10
2: 20
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
0:
10:250
240
1:
11:500
320
2:
12:1000
640
3:
13:2000
1280
4:
14:4000
2560
5:
15:8000
5000
6: 16000
ms
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
5: 8000
6: 16000
ms
RNC
Parameter
0..2147483647
N/A
ms
0: Acknowledged
Mode RLC
N/A
1:
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control

amount of reporting for periodic
reporting mode.
Dynamic Radio
Bearer Control
0: False
1: True
0: 1
1: 2
2: 4
3: 8
4: 16
5: 32
6: 64
7: Infinity
UTRAN Cell
N/A
N/A

reporting interval for periodic
reporting mode.
This
This parameter
parameter indicates
indicates the
the UP
RLC
of the
traffic volume
Trafficmode
Volume
Event
measurement
is
AM
RLC,
RNC
can request UE
Object ID for FACH.
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
quantity
of
theof
(to reduce the traffic volume
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
only valid when the
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
1: 250
2: 500
3: 1000
4: 2000
5: 3000
6: 4000
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
12: 24000
13:
28000
0..2147483647
14: 32000
15: 64000
ms
N/A
0: Acknowledged
Mode RLC
1:
N/A
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

This
measurement.
event
the trafficthe
This parameter
volume
measurement
performed
4A
by
UE.
Where
This
parameteron
indicates
the
measurement
FACH channel.
time
difference
between
having
If the traffic volume becomes
is the maximum
number
of
detected
thethe
event
generation
larger
than
threshold
of UE
event
traffic
volumeofthe
measurement
and
Onlybe
4A, areporting
report
4Aevent.
event will
event,
which
to 2. is
when
the
event
triggered;
andequals
if generation
the traffic
detected
and
still
meets
volume becomes smallerallthan
requirements
of event
event 4B,
triggering
the threshold of
a
after
Time
to
trigger,
the
report of 4B event will beevent
can
be triggered and reported.
triggered.
The
larger the value is, the
Where
stricter
the judgment is for the
event
to
be triggered.
Theof UE
is the maximum
number
parameter
should
be
set
according
to the
actual
event, which
equals
to 2.
requirements. Sometimes, if it is
set too large, the quality of calls
may decrease.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20: 240
128K
10:
21:
192K
11: 320
22:
12: 256K
640
23:
13: 384K
1280
24:
14: 512K
2560
25:
15: 768K
5000
N/A
N/A
bytes
ms
pending time after trigger. This

timer is started in the UE when a
measurement report has been
triggered by a given event. The
new measurement reports
during this time period, instead
the UE waits until the timer
expires.
Where
This
parameter
This
parameter indicates
indicates the
the UE
RLC
mode
of
the
traffic
volume
Traffic
Volume
Event
measurement
Measurement
Configuration
is
AM
RLC,
RNC
cantorequest
UE
Object
ID for equals
DCH.
event, which
2.
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
quantity
of
theof
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
only valid when the
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
5: 8000
6: 16000
RNC
Parameter
0..2147483647
ms
N/A
0: Acknowledged
Mode RLC
1:
N/A
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

This
measurement.
event
the trafficthe
This parameter
volume
measurement
performed
4A
by
UE.
Where
measurement on DCH whose
rate is 8 kbps. If the traffic
is the maximum
number
of UE
volume
becomes
larger than
This
parameter
indicates
the the
traffic
volume
measurement
threshold
of
event
4A,
a
report
reporting
threshold
oftoevent
4A of
event,
which
equals
2. and
4A
event
will
be
triggered;
if
the
traffic
volume
becomes
smaller
than
theIf threshold
rate is 16
kbps
the traffic of
event 4B,
a reportlarger
of 4B than
eventthe
volume
becomes
will
be triggered.
threshold
of event 4A, a report of
Where
4A event will be triggered; and if
the traffic volume becomes
is
the maximum
ofof
UE
smaller
than the number
threshold
traffic
volume
measurement
event 4B, a report of 4B event
event,
equals to 2.
will
be which
triggered.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5:
0: 256
8
6:
512
1:
16
0:
4a
7:
1024
2:
32
1:
8: 4b
2K
3:
64
9:
4: 3K
128
10:
4K
5: 256
11:
6K
6: 512
12:
8K
7: 1024
13:
12K
8: 2K
14:3K
16K
9:
15:
10: 24K
4K
16:
32K
11: 6K
17:
12: 48K
8K
18:
13: 64K
12K
19:
14: 96K
16K
20: 24K
128K
15:
21:
16: 192K
32K
22:
17: 256K
48K
23:
18: 384K
64K
24:
19: 512K
96K
25:
20: 768K
128K
N/A
N/A
bytes
bytes
reporting threshold of event 4A

volume
becomes
larger than
This parameter
indicates
the the
threshold
of
event
4A,
a
report
reporting threshold of event 4A of
4A
be triggered;
andevent
4B forwill
traffic
volume and if
the
traffic
volume
becomes
measurement on DCH
whose
smaller
than
the
threshold
rate is 64 kbps. If the trafficof
event 4B,
a reportlarger
of 4B eventthe
volume
becomes
This
parameter
indicatesthan
the
will
be
triggered.
threshold
of
event
4A,
a report
reporting
threshold
of
event
4A of
Where
4A
event
will
be
triggered;
and
if
and
4B for traffic volume
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
ofof
UE
smaller
thankbps.
the number
threshold
rate
is
128
If the traffic
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
ofof
UE
smaller
thankbps.
the number
threshold
rate
is
256
If the traffic
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
This
parameter
indicates
the
measurement
onnumber
DCH whose
is
thedifference
maximum
ofof
UE
smaller
thankbps.
thebetween
threshold
time
having
rate
is
384
If
the traffic
traffic
volume
measurement
event 4B,
a report
of
4B event
detected
the
eventlarger
generation
volume
becomes
event,
which
equals
to 2.than the
will
be
triggered.
and
reporting
the event.
threshold
of event
4A, a Only
report of
Where
when
the will
event
is if
4A event
be generation
triggered; and
detected
still meets
all
the trafficand
volume
becomes
is
the maximum
number
ofof
UE
requirements
of event
triggering
smaller
than the
threshold
traffic
volume
measurement
after
Time
to
trigger,
the
event
event,
which
equals
2. the
can
be
triggered
andtoreported.
will
triggered.
Thisbe
parameter
indicates
The
larger
the
value
is,
theThis
Where
stricter
judgment
forwhen
the a
timer
is the
started
in the isUE
event
to be triggered.
Theof
is the maximum
number
UE
measurement
report
has
been
parameter
beevent.
set The
traffic volume
triggered
byshould
a measurement
given
according
to
the
actual
event,
which
equals
to
UE
is then
forbidden
to2.
send
requirements.
Sometimes,
new measurement reports if it is
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
the maximum number of UE
Where
This
parameter
indicates
traffic
volume measurement
This
parameter
indicates the
the UP
RLC
ofequals
the
traffic
event,
which
to 2.volume
Traffic
Volume
Event
is
themode
maximum
number
of UE
measurement
Measurement
Configuration
is
AM
RLC,
RNC
cantorequest
UE
Object
ID for equals
DCH.
event, which
2.
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
of theof
traffic volume
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
only valid when the
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
5:
0: 256
8
6:
1: 512
16
7:
2: 1024
32
8:
3: 2K
64
9:
4: 3K
128
10:
4K
5:
256
0:
86K
11:
6:
512
1:
16
12:
8K
7:
1024
2:
32
13:
12K
8: 64
2K
3:
14:3K
16K
9:
4:
128
15:
24K
10:
4K
5:
256
0:
8
16:
32K
11:
6K
6:
512
1:
16
17:
48K
12:
8K
7:
1024
2:
32
18:
64K
13:
12K
8:
2K
3:
64
19:
96K
14:3K
16K
9:
4:
20:128
128K
15:
24K
10:
4K
5:
256
21:
192K
0:
8
16:
32K
11:
6K
6:
512
22:
256K
1:
16
17:
48K
12:
8K
7:
1024
23:
384K
2:
32
18:
64K
13:
12K
8:
2K
24:
512K
3:
64
19:
96K
14:
16K
9:
3K
25:
4:
128
20: 768K
128K
15:
24K
10:
4K
5:
256
21:
192K
16:
32K
11:
6K
6:
512
22:
256K
17:
48K
12:
8K
7:
1024
23:
384K
18:
64K
13:
12K
8:
2K
24:
512K
19:
96K
14:
16K
9:
3K
25:
20: 768K
128K
15:
24K
10:
0:
04K
21:
192K
16:
32K
11:
6K
1:
10
22:
256K
17:
48K
12:
8K
2:
20
23:
384K
18:
64K
13:
12K
3:
40
24:
512K
19:
96K
14:
16K
4:
60
25:
20: 768K
128K
15:
24K
5:
80
21:
192K
16:
32K
6:
100
22:
256K
17:
48K
7:
120
23:
384K
18:
64K
8:
160
24:
512K
19:
96K
9:
200
25:
768K
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
0..2147483647
bytes
bytes
bytes
bytes
bytes
ms
ms
N/A
0: Acknowledged
Mode RLC
1:
N/A
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

This
measurement.
event
the trafficthe
This parameter
volume
measurement
performed
4A
by
UE.
Where
is the maximum
number
of UE
volume
becomes
larger than
This
parameter
indicates
the the
traffic
volume
measurement
threshold
of
event
4A,
a
report
reporting
threshold
oftoevent
4A of
event,
which
equals
2. and
4A
event
will
be
triggered;
if
the
traffic
volume
becomes
smaller
than
theIf threshold
rate is 16
kbps
the traffic of
event 4B,
a reportlarger
of 4B eventthe
volume
becomes
This
parameter
indicatesthan
the
will
be
triggered.
threshold
of
event
4A,
a report
reporting
threshold
of
event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
of UE
smaller
than
theIfnumber
threshold
rate
is
32
kbps.
the trafficof
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
of UE
smaller
than
theIfnumber
threshold
rate
is
64
kbps.
the trafficof
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
ofof
UE
smaller
thankbps.
the number
threshold
rate
is
128
If the traffic
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
measurement
on DCH whose
is
the maximum
ofof
UE
smaller
thankbps.
the number
threshold
rate
is
256
If the traffic
traffic
volume
measurement
event 4B,
a reportlarger
of 4B than
event
volume
becomes
This
parameter
indicates
event,
which
equals
to 2. the the
will
be
triggered.
threshold
of
event
4A,
a
report
reporting
threshold of event
4A of
Where
4A
event
will
be
triggered;
and
if
and
the
traffic
volume
becomes
This
parameter
indicates
the
measurement
onnumber
DCH whose
is
thedifference
maximum
ofof
UE
smaller
thankbps.
thebetween
threshold
time
having
rate
is
384
If
the traffic
traffic
volume
measurement
event 4B,
a report
of
4B event
detected
the
eventlarger
generation
volume
becomes
event,
which
equals
to 2.than the
will
be
triggered.
and
reporting
the event.
threshold
of event
4A, a Only
report of
Where
when
the will
event
is if
4A event
be generation
triggered; and
detected
still meets
all
the trafficand
volume
becomes
is
the maximum
number
ofof
UE
requirements
of event
triggering
smaller
than the
threshold
traffic
volume
measurement
after
Time
to
trigger,
the
event
event,
equals
2.
can
bewhich
triggered
andtoreported.
will
be
triggered.
The
Where
stricter
the judgment is for the
event
to
be triggered.
Theof UE
is the maximum
number
parameter
should
be
set
according
to the
actual
event, which
equals
to 2.
requirements. Sometimes, if it is
set too large, the quality of calls
may decrease.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5:
0: 256
8
6:
512
1:
16
0:
4a
7:
1024
2:
32
1:
8: 4b
2K
3:
64
9:
4: 3K
128
10:
4K
5:
256
0:
86K
11:
6:
512
1:
16
12:
8K
7:
1024
2:
32
13:
12K
8: 64
2K
3:
14:3K
16K
9:
4:
128
15:
24K
10:
4K
5:
256
0:
8
16:
32K
11:
6K
6:
512
1:
16
17:
48K
12:
8K
7:
1024
2:
32
18:
64K
13:
12K
8:
2K
3:
64
19:
96K
14:3K
16K
9:
4:
20:128
128K
15:
24K
10:
4K
5:
256
21:
192K
0:
8
16:
32K
11:
6K
6:
512
22:
256K
1:
16
17:
48K
12:
8K
7:
1024
23:
384K
2:
32
18:
64K
13:
12K
8:
2K
24:
512K
3:
64
19:
96K
14:
16K
9:
3K
25:
4:
128
20: 768K
128K
15:
24K
10:
4K
5:
256
21:
192K
0:
8
16:
32K
11:
6K
6:
512
22:
256K
1:
16
17:
48K
12:
8K
7:
1024
23:
384K
2:
32
18:
64K
13:
12K
8:
2K
24:
512K
3:
64
19:
96K
14:
16K
9:
3K
25:
4:
128
20: 768K
128K
15:
24K
10:
4K
5:
256
21:
192K
0:
8
16:
32K
11:
6K
6:
512
22:
256K
1:
16
17:
48K
12:
8K
7:
1024
23:
384K
2:
32
18:
64K
13:
12K
8:
2K
24:
512K
3:
64
19:
96K
14:
16K
9:
3K
25:
4:
128
20: 768K
128K
15:
24K
10:
4K
5:
256
21:
192K
16:
32K
11:
6K
6:
512
22:
256K
17:
48K
12:
8K
7:
1024
23:
384K
18:
64K
13:
12K
8:
2K
24:
512K
19:
96K
14:
16K
9:
3K
25:
20: 768K
128K
15:
24K
10:
0:
04K
21:
192K
16:
32K
11:
6K
1:
10
22:
256K
17:
48K
12:
8K
2:
20
23:
384K
18:
64K
13:
12K
3:
40
24:
512K
19:
96K
14:
16K
4:
60
25:
20: 768K
128K
15:
24K
5:
80
21:
192K
16:
32K
6:
100
22:
256K
17:
48K
7:
120
23:
384K
18:
64K
8:
160
24:
512K
19:
96K
9:
200
25:
20: 768K
128K
10:
240
21:
192K
11: 320
22:
12: 256K
640
23:
13: 384K
1280
24:
14: 512K
2560
25:
15: 768K
5000
N/A
N/A
bytes
bytes
bytes
bytes
bytes
bytes
bytes
ms
pending time after trigger. This

timer is started in the UE when a
measurement report has been
triggered by a given event. The
new measurement reports
during this time period, instead
expires.
Where
This
parameter
This
parameter indicates
indicates the
the UE
RLC
mode
of
the
traffic
volume
Traffic
Volume
Period
measurement
Measurement
Configuration
is
AM
RLC,
RNC
cantorequest
UE
Object
ID for equals
DCH.
event, which
2.
This
indicates
the
thoseparameter
less important
in UM
mode
measurement
quantity
of
theof
traffic
volume measurement
the measurement
report andthat
UE
performs.
increase
only valid when the
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
5: 8000
6: 16000
RNC
Parameter
0..2147483647
ms
N/A
0: Acknowledged
Mode RLC
1:
N/A
Unacknowledged
Mode RLC
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control

amount of reporting for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control

reporting interval for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
0: 1
1: 2
1:
2: 250
4
2:
3: 500
8
3:
4: 1000
16
4:
5: 2000
32
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
12: 24000
13:
28000
0..2147483647
14: 32000
15: 64000
This
This parameter
parameter indicates
indicates the
the UP
Traffic
Volume
Measurement
RLC mode
of the
traffic volume
Configuration
measurement Number
report. Iffor
the value RNC
Streaming
Class
on
HS-DSCH
is AM RLC, RNC can request UE
Object
ID.
for retransmission
after receiving
UTRAN Cell
those less important in UM mode
(to reduce the traffic volume of
the measurement report and
increase the system capacity).
Parameter
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
N/A
ms
N/A
N/A
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

measurement quantity of the
UTRAN Cell
traffic volume measurement that
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
This
eventparameter
the trafficthe
reporting
threshold of event
4A
volume measurement
performed
and
by UE.
measurement
Streaming
Where
This
parameterfor
indicates
the
Class
on
HS-DSCH
Channel.
If
time
difference between
having
the
traffic
volume
becomes
is the maximum
number
of UE
detected
the event
generation
larger
than thethe
threshold
of event
traffic
volume
measurement
and reporting
event. Only
4A,
a
report
of
4A
event
will
event,
which
equals
to
2.
when the event generation isbe
triggered;and
andstill
if the
traffic
detected
meets
all
volume
becomes
smaller
than
requirements
of event
triggering
the
threshold
of
event
4B,
a
report
of
4B
event
will
be
can
be
triggeredindicates
and reported.
This
parameter
the
triggered.
The
larger
the
value
is, theThis
pending
time
after
trigger.
Where
stricteris the
judgment
forwhen
the a
timer
started
in the isUE
event
to be triggered.
Thebeen
measurement
report
has
is
the maximum
number
UE
parameter
beevent.
set of The
triggered
byshould
a measurement
given
traffic
volume
according
to
the actual
UE
is then
forbidden
to2.
send
event,
which
equals
to
requirements.
Sometimes,
new measurement
reports if it is
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
This
parameter
indicates
This
parameter
indicates the
the UP
traffic
volume measurement
Traffic
Volume
Measurement
RLC
mode
of
the
traffic
volume
event,
which equals
to 2.of UE
is
the maximum
number
Configuration
for
Interactive
and
measurement
report.
If the value
traffic
volume
measurement
Background
Class
on
HS-DSCH
is
AM RLC,
RNC cantorequest
UE
event,
which
2.
Object
ID. equals
for retransmission
after receiving
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
UTRAN Cell
N/A
N/A
bytes
ms
ms
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
This
eventparameter
the trafficthe
reporting
threshold of event
4A
volume measurement
performed
and
by UE.
measurement
Interactive
Where
This
parameterfor
indicates
the and
Background
Class
on
HS-DSCH
time
difference between having
Channel.
If the
traffic
volume
is the maximum
number
of UE
detected
the
event
generation
becomes
larger
than
the
traffic
volume
measurement
and reporting the event. Only
threshold
of event
4A,
event,
which
equals
to a2.report
when the
event
generation
is of
4A event and
will be
detected
stilltriggered;
meets alland if
the
traffic volume
becomes
requirements
of event
triggering
smaller
than
the
threshold
of
event
4B,
a
report
of
4B
event
can
be
triggeredindicates
and reported.
This
parameter
the
will
be
triggered.
The
larger
the
value
is, theThis
pending
time
after
trigger.
Where
stricteris the
judgment
forwhen
the a
timer
started
in the isUE
event
to be triggered.
Thebeen
measurement
report
has
is
the maximum
number
UE
parameter
beevent.
set of The
triggered
byshould
a measurement
given
traffic
volume
according
to
the actual
UE
is then
forbidden
to2.
send
event,
which
equals
to
requirements.
Sometimes,
new measurement
reports if it is
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
This
parameter
indicates
traffic
volume measurement
This
parameter
indicates the
the UP
RLC
ofequals
the
traffic
event,
which
to 2.volume
Traffic
Volume
Measurement
is
themode
maximum
number
of UE
measurement
report.
If the value
Configuration
for
HS-DSCH
in
is
AM
RLC,
RNC
can
request
UE
CELL_FACH
Object to
ID.
event, which equals
2.
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
UTRAN Cell
N/A
N/A
bytes
ms
ms
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
This
eventparameter
the trafficthe
reporting
threshold of event
4A
volume measurement
performed
and
by UE.
measurement
HS-DSCH
Where
This
parameteron
indicates
the
Channel
in
CELL_FACH.
If the
time
traffic
volume
becomes
larger
is the maximum
number
of UE
detected
the event
generation
than
the
threshold
of event
4A, a
traffic
volume
measurement
and reporting
the
event.
Only
report
of
4A
event
will
be
event,
which
equals
to
2.
triggered;and
andstill
if the
traffic
detected
meets
all
volume
becomes
smaller
than
requirements
of event
triggering
the
threshold
of
event
4B,
a
report
of
4B
event
will
be
can
be
triggeredindicates
and reported.
This
parameter
the
triggered.
The
larger
the
value
is, theThis
pending
time
after
trigger.
Where
stricteris the
judgment
forwhen
the a
timer
started
in the isUE
event
to be triggered.
Thebeen
measurement
report
has
is
the maximum
number
UE
parameter
beevent.
set of The
triggered
byshould
a measurement
given
traffic
volume
according
to
the actual
UE
is then
forbidden
to2.
send
event,
which
equals
to
requirements.
Sometimes,
new measurement
reports if it is
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
This
parameter
indicates
traffic
volume measurement
This
parameter
indicates the
the UP
RLC
thenumber
traffic
event,
whichofEvent
equals
to 2.volume
Throughput
Measurement
is
themode
maximum
of UE
measurement
report.
If the
value
Configuration
for
E-TTI
Switching
is
AM
RLC,
RNC
can
request
UE
Object
ID. equals to 2.
event, which
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
UTRAN Cell
N/A
N/A
bytes
ms
ms
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
1..2
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A

UTRAN Cell
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
event identity of the traffic
volume
measurement
performed
This parameter
indicates
the
by
UE.
reporting threshold of event 4A
Where
This
parameter
indicates the
and 4B
for throughput
time
difference
between
measurement on E-DCH.having
If the
is the maximum
number
of UE
detected
thebecomes
event
generation
throughput
larger
than
traffic
volume of
measurement
and
reporting
the
event.
Only
the threshold
event
4A,
a
event,
which
equals
tobe
2. is
when
event
generation
report the
of
4A
event
will
detected
and
still
meets
all
triggered; and if the throughput
requirements
of
event
triggering
becomes smaller than the
after
Timeoftoevent
trigger,
the
threshold
4B,
a event
report of
can
be
triggered
and
reported.
4B
event
will
be
triggered.
The
larger
theafter
value
is, theThis
Where
pending
time
trigger.
stricter
judgment
forwhen
the a
timer
is the
started
in the isUE
event
to be triggered.
Theof
is the maximum
number
UE
measurement
report
has
been
parameter
beevent.
set event,
throughput
measurement
triggered
byshould
a given
The
according
to
the
actual
which
equals
to 2.
UE
is then
forbidden
to send
requirements.
Sometimes,
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
This
parameter
indicates
traffic
volume measurement
This
parameter
indicates the
the UP
RLC
ofequals
the
traffic
event,
which
to 2.volume
Traffic
Volume
Measurement
is
themode
maximum
number
of UE
measurement
report. ID
If the
Configuration
Object
for value
Etraffic volume measurement
is
AM
RLC,
RNC
can
request
UE
DCH.
0: 0
1: 10
2:
20
1..2000,
Step 1
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
0:
10:250
240
1:
11:500
320
2:
12:1000
640
3:
13:2000
1280
4:
14:4000
2560
5:
15:8000
5000
6: 16000
RNC
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
UTRAN Cell
kbps
ms
ms
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
event
the trafficthe
This parameter
volume
measurement
performed
4A
by
UE.
Where
This
parameteron
indicates
measurement
E-DCH the
time
difference
between
having
channel. If the traffic volume
is the maximum
number
detected
the
event
generation
becomes
larger
than
the of UE
traffic
volume
measurement
and
reporting
the
event.
threshold
of event
4A, a Only
report of
event,
which
equals
to 2. and
when
the will
event
is if
4A event
be generation
triggered;
detected
still meets
all
the trafficand
volume
becomes
requirements
of event
triggering
smaller than the
threshold
of
after
Time
to
trigger,
the
event
can
be
triggeredindicates
and reported.
will
triggered.
Thisbe
parameter
the
The
larger
the
value
is, theThis
Where
stricter
judgment
forwhen
the a
timer
is the
started
in the isUE
event
to be triggered.
Theof
is the maximum
number
UE
measurement
report
has
been
parameter
beevent.
set The
traffic volume
triggered
byshould
a measurement
given
according
to
the
actual
event,
which
equals
to
UE
is then
forbidden
to2.
send
requirements.
Sometimes,
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
This
parameter
indicates
traffic
volume measurement
This
parameter
indicates the
the UP
RLC
ofequals
the
traffic
event,
which
to 2.volume
Traffic
Volume
Measurement
is
themode
maximum
number
of UE
measurement
report.
If the
Configuration
for
E-DCH
in value
is
AM
RLC,
RNC
can
request
UE
CELL_FACH
Object to
ID.2.
event, which equals
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
UTRAN Cell
N/A
N/A
bytes
ms
ms
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
N/A
buffer payload
3: Variance of RLC
buffer payload
Dynamic Radio
Bearer Control
20..260, step 20
ms
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
UE performs.
only valid when the
UTRAN Cell
UTRAN Cell
requested or not.

This
measurement.
This
eventparameter
the trafficthe
reporting
threshold of event
4A
volume measurement
performed
and
by UE.
measurement
E-DCH the
Where
This
parameteron
indicates
Channel
in
CELL_FACH.
If the
time
traffic
volume
becomes
larger
is the maximum
number
of UE
detected
the event
generation
than
the
threshold
of event
4A, a
traffic
volume
measurement
and reporting
the
event.
Only
report
of
4A
event
will
be
event,
which
equals
to
2.
triggered;and
andstill
if the
traffic
detected
meets
all
volume
becomes
smaller
than
requirements
of event
triggering
the
threshold
of
event
4B,
a
report
of
4B
event
will
be
can
be
triggeredindicates
and reported.
This
parameter
the
triggered.
The
larger
the
value
is, theThis
pending
time
after
trigger.
Where
stricteris the
judgment
forwhen
the a
timer
started
in the isUE
event
to be triggered.
Thebeen
measurement
report
has
is
the maximum
number
UE
parameter
beevent.
set of The
triggered
byshould
a measurement
given
traffic
volume
according
to
the actual
UE
is then
forbidden
to2.
send
event,
which
equals
to
requirements.
Sometimes,
new measurement
reports if it is
set
too large,
thesame
quality
of calls
triggered
by the
event
may
decrease.
during
Where
expires.
is
Where
traffic
volume measurement
This
parameter
indicates the UP
event,
which
equals
to 2.of UE
Traffic
Volume
Measurement
is
the maximum
number
Configuration
Object ID for Etraffic volume measurement
DCH.
only valid when the
0: 8
1: 16
1..2
2: 32
3: 64
4: 128
5: 256
6: 512
0:
7: 4a
1024
1:
8: 4b
2K
9: 3K
10:
0: 04K
11:
6K
1: 10
12:
8K
2: 20
13:
12K
3: 40
14:60
16K
4:
15:
24K
5: 80
16:
32K
6: 100
17:
48K
7: 120
18:
64K
8: 160
19:
96K
9: 200
20:250
128K
0:
10:
240
21:
192K
1:
11:500
320
22:
256K
2:
12:1000
640
23:
3:
2000
13: 384K
1280
24:
512K
4:
14:4000
2560
25:
5:
8000
15: 768K
5000
6: 16000
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20
ms
N/A
N/A
bytes
ms
ms

This
measurement.
event identity of the traffic
This
parameter
indicates
the
volume
measurement
performed
pending
by UE. time after trigger. This
timer
is started in
the UE when
Where
This
parameter
indicates
the a
measurement
report
has
been
time
triggered
by aevent
given
event.
is the maximum
number
of The
UE
detected
the
generation
UE
is
then
forbidden
to
send
traffic
volume
measurement
new
reports
event,
which
equals
to 2. is
whenmeasurement
the
event
generation
triggered and
by the
event
detected
stillsame
meets
all
during
this time
instead
requirements
of period,
event triggering
the
waits
until thethe
timer
afterUE
Time
to trigger,
event
expires.
can
be
triggered
and
reported.
This
parameter indicates the EWhere
The
larger
the throughput
value is, the
DCH
Channel
stricter the judgment
is for
measurement
threshold
of the
Event
is the maximum
number
event
to
beHS-DSCH/E-DCH
triggered.
Theof UE
4A/4B
for
to
traffic
volume
measurement
parameter
should
be set If the
HS-DSCH/DCH
switching.
event,
which the
equals
to 2.
according
actual
throughputtobecomes
larger than
requirements.
Sometimes,
the threshold of
event 4A, aif it is
set
toooflarge,
the quality
report
4A event
will beof calls
may
decrease.
triggered;
and if the throughput
Where
becomes smaller than the
threshold of event 4B, a report of
is
maximum
number of UE
4Bthe
event
will be triggered.
This
parameter
indicates
the
traffic
volume
measurement
This
parameter
indicates
the
Where
RLC
the
traffic
event,mode
whichofequals
to 2.
measurement
quantity
ofvolume
the
measurement
report.
If the
value
traffic
volume measurement
that
is the maximum
number
of UE
is
AM
RLC,
RNC
can
request
UE
UE
performs.
throughput
measurement event,
for
retransmission
after
receiving
which equals to 2.
This
indicates
thoseparameter
less important
in UM mode
whether
thethe
report
ofvolume
RLC buffer
(to reduce
traffic
of
payload
for each radio
bear
the measurement
report
andis
requested
or system
not.
increase the
capacity).
UTRAN Cell
Dynamic Radio
Bearer Control
1..2
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
0: 250
0:
1: 0
500
1:
2: 10
1000
2:
3: 20
2000
3:
4: 40
4000
4:
5: 60
8000
5:
6: 80
16000
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
1..2000,
13: 1280Step 1
14: 2560
15: 5000
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of RLC
buffer payload
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A

UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates Object

ID of Intra-frequency
measurement profile
configuration.
RNC
Parameter
0..2147483647
N/A
The parameter indicates Intrafrequency measurement profile

identity.
UTRAN Cell
Handover Control
0..99
N/A
ms
ms
kbps
N/A
N/A
The parameter indicates

handover and cell reselection
scenarios.For each scenario, the
corresponding
This
parameterparameters
differentiatecan
This
parameter
be set
assets
different
values.the
different
of indicates
handover
filtering
factor
that
UEtoperforms
parameter according
different
the
L3
filtering
on
the
This
parameter
indicates
Object
traffic type. Taking account
of
measurement
results
of
the
intraID
of
Intra-frequency
various characteristic of service,
frequency
measurement.
measurement
configuration
it should have various handover
UE
executes
intra-frequency
related
to traffic
category.
parameters
such
as report range
measurement
on L1 in
for 1a/1b, hysteresis
forthe
1d,fixed
cycle
(measure
several
points
in
absolute threshold for 1e/1f etc.
one
measurement
cycle
and
L1
Altogether there are 9 sets of
filters
the measurement
configuration
for differentresults.
This
method
can
decided
by
scenario based onbeservice
type,
UE
freely).
Then
L1
reports
to
L3
transport channel type,
at
intervals
and
L3
filters
the
single/multi
RAB.
This
parameter
indicates
Object
latest
measurement
results
When
the
parameter
is 0xff,and
if
ID
of
Intra-frequency
event
the
measurement
results savedor
the
detected
set
measurement
measurement
for
previously.
Theconfiguration
filtering
period
is shall
used,be
CPICHmeasurement
Ec/No
performed
according
to
the
this configuration isn't related to
following
formulabut
described
specific service
all the in
3GPP
TS
25.331:
"RRC
This parameter indicatesProtocol
number
service.
Specification"
: Fn=to(1-a)*Fnof events required
be
1+a*Mn
, a for
= 1/2^
(k/2)of. the
configured
the set
Fn is the updated
filtered
intra-frequency
measurement
measurement
parameters forresult
a certain
Fn-1
is the
previous
filtered
purpose.
The
number
of the
measurement
result
events is related to the purpose
Mn
is the
latest received
of the
measurement
and the
measurement
result
judgment
method
of the soft
This
parameter
indicates
the of
a = 1/2^ (k/2),
the value
handover.
Thewhere
measurement
event
ID
triggered
by
the
intrakparameter
is the Filter
of Coefficient.
the soft handover is
frequency
measurement.
NOTE:
if
k
is set
to 0 that
will
related
to
the
number
of the
MAX_INTRA_MEAS_EVENT
mean
no
layer
3
filtering.
events
in the
the maximum
soft handover
indicates
number
parameter
controlsthat
thethe
This
formula
indicates
algorithm.
of
intra-frequency
measurement
triggering
of
event
1a/1b.
1a is
smaller the value of the filtering
event,
which
is
7.
easier
but
1b
is
harder
to
trigger
factor is, the larger effect the
This
parameter
the
when
value indicates
increases;
currentthis
measurement
resultand
will
hysteresis
used when judging
vice
verse.
have
on
the
measurement
result
This
parameter
is used
for This
whether
to trigger
the event.
reported
to RNC of
(periodical
quality judgment
event
1a and
parameter
makes
it
different
indicates
maximum
numberof
report)
or the
the
judgment
(event
1b,
which
indicates
thetrigger
weight
between
the
status
to
an
of
intra-frequency
report).
the
best
cell
instatus
themeasurement
quality
event
and
the
to
leave
event,
which
isis7.related to thethe
judgment
andto
event, so as
avoid the trigger
measurement
andsmall
the
status change quantity
due to very
event
type.
change.
The
larger the value is, the larger
indicates
the maximum
number
the difference
between the
of
intra-frequency
measurement
status to trigger the event and
event,
which
is 7. the event will
the status
to leave
be.
This parameter
parameter indicates
is related the
to the
This
measurement
quantity
and
the
This
parameter
indicates
the
absolute
threshold
value
used
event
type.
maximum
number of the cells
for event 1e/1f.
Different
events
are configured
that
can exist
in active
set. When
separately
and
can
be
the
UE
detects
that
one
cell in
indicates the maximum number
configured
with
different
the
monitoring
set
satisfies
the
of intra-frequency measurement
hysteresis
threshold
of event
event,
which
is 7. 1a, it first
judges whether the number of
indicates
number
the
cells inthe
themaximum
current active
set
of not
intra-frequency
measurement
is
bigger than the
value
event, which
is 7 parameter. If so,
indicated
by this
event 1a is triggered. If not,
event 1a is not triggered.
event, which is 7.
Excluding Voice)
2: Single NRT on
DL DCH/UL DCH
(Single NRT on DL
DCH/UL
DCH)
0: Outdoor
Scene
3:
Single
NRT
1: High-Mobility
RAB
on DL
HSOutdoor
Scene
DSCH/UL
DCH
2: Indoor Scene
(Single
NRTtunnel
RAB
3: Subway/
on
DL
HSScene
DSCH/UL DCH)
4: Single NRT
RAB
on DL HS0..2147483647
DSCH/UL E-DCH
(Single NRT RAB
on DL HSDSCH/UL E-DCH)
5: All Multi-NRT
RAB on DL
DCH/UL DCH (All
Multi-NRT RAB on
DL
0: 0DCH/UL DCH)
6: 1
Multi-NRT RAB,
1:
0..2147483647
HSPA
2:
2 is Involved
and
3:
3 only DCHs are
Used
4:
4 in UL (MultiNRT
5: 5 RAB, HSPA
is
and
6: Involved
6
only
7:
7 DCHs are
Used
8:
8 in UL)
7: 9
Multi-NRT RAB,
9:
HSPA
10:
11 is Involved
and
E-DCH is
11: 13
Used
12:
15
1..7 in UL (MultiNRT17RAB, HSPA
13:
is Involved
and E14:
19
0:
1a is Used in
DCH
1:
1b
UL)
2:
8: 1c
Multi Rab
3:
1d
Including
CS and
4:
PS1e
(Multi Rab
5:
1f
Including
CS and
6:
1j
PS)
UTRAN Cell
Handover Control
N/A
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0..14.5, step 0.5
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
0..7.5, step 0.5
dB
UTRAN Cell
and Service
Related
Handover Control
-24..0, Step: 1
dB
UTRAN Cell
and Service
Related
Handover Control
0..7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
can exist in the DCH active set

when triggering event 1c or in
the
active
set when
ThisE-DCH
parameter
indicates
the
triggering
event
1j.
Whenhaving
UE
time difference between
detects
cellgeneration
satisfies the
detectedthat
theone
event
trigger
threshold
eventOnly
1c/1j, it
and reporting
theofevent.
first
checks
whether
the
number
when
the event indicates
generation
is
This
the
of
theparameter
cells
in still
the meets
currentall
active
detected
and
maximum
times
to the
report
the
set
is smaller
than
value
requirements
of
event
triggering
measurement
report
after
indicated
parameter.
If so,
after
Timeby
to this
trigger,
the event
triggering
event
event
1c/1j
is not1a/1b/1c/1j
triggered.
If the
can
be
triggered
and
reported.
(because
are reported
value
is 0,they
the
parameter
is
The
larger
theAfter
value
is, the
periodically).
event
invalid.
stricter
the judgment
is for
1a/1b/1c/1j
is triggered,
thethe
UE
event
to
be
triggered.
The
reports
the
measurement
results
indicates
the
maximum
number
parameter
should
be set
This
parameter
the
according
to
theindicates
report
intervals.
of intra-frequency
measurement
according
to
the
actual
filtering
factor
that
UE
performs
If
the
times
of
event
reports
event,
which isSometimes,
7
requirements.
it is
the
L3 filtering
on the
exceeds
the value
indicatedif by
set
too
large,
the
quality
of
calls
This
parameter
indicates
the
measurement
of the intrathis parameter,results
UE stops
may
decrease.
time
interval
to
report the
frequency
measurement.
reporting
the
measurement
measurement
results
UE
executes
results.
If the intra-frequency
result
of after
judgment
indicates that
the
maximum
number
triggering
event
measurement
on1a/1b/1c/1j
L11a/1b/1c/1j
in the
fixed
indicates
event
of
intra-frequency
measurement
(because
theyreporting
are
reported
cycle
(measure
several
points in
finishes,
stop
the
event,
which is
7. event
periodically).
After
one
measurement
cycle
and
L1
measurement
results
even
the
1a/1b/1c/1j
is
triggered,
the
UE
filters
measurement
results.
times the
of report
do not reach
the
reports
the measurement
results
This
canbybe
decided
by
valuemethod
indicated
this
according
to
the
report
intervals.
UE
freely).
Then
L1
reports
to
L3
parameter.
at
intervals and L3 filters the
This
parameter
indicates
Object
indicates
the
number
latest
measurement
results
and
indicates
the maximum
maximum
number
ID
of
Intra-frequency
event
of
intra-frequency
measurement
the
measurement measurement
results saved
of intra-frequency
measurement
event,
is
7.
previously.
The
filtering shallfor
be
event, which
which
isconfiguration
7.
CPICH RSCP
performed
according to the
following formula described in
3GPP
TS 25.331:
"RRC Protocol
This parameter
indicates
number
Specification"
:
Fn=
of events required to(1-a)*Fnbe
1+a*Mn
, a for
= 1/2^
(k/2)of. the
configured
the set
Fn is the updated
filtered
intra-frequency
measurement
measurement
parameters forresult
a certain
Fn-1
is the
previous
filtered
purpose.
The
number
of the
measurement
result
events is related to the purpose
Mn
is the
latest received
of the
measurement
and the
measurement
result
judgment
method
of the soft
This
parameter
indicates
the of
a = 1/2^ (k/2),
the value
handover.
Thewhere
measurement
event
ID
triggered
by
the
intrakparameter
is the Filter
of Coefficient.
the soft handover is
frequency
measurement.
NOTE:
if
k
is set
to 0 that
will
related
to
the
number
of the
mean
no
layer
3
filtering.
events
in the
the maximum
soft handover
indicates
number
parameter
controlsthat
thethe
This
formula
indicates
algorithm.
of
intra-frequency
measurement
triggering
of
event
1a/1b.
1a is
event,
which
is
7.
easier
but
1b
is
harder
to
trigger
This
parameter
the
when
value indicates
increases;
currentthis
measurement
resultand
will
hysteresis
used when judging
vice
verse.
have
on
the
measurement
result
This
parameter
is used
for This
whether
to trigger
the event.
reported
to RNC of
(periodical
quality judgment
event
1a and
parameter
makes
it
different
indicates
maximum
numberof
report)
or the
the
judgment
(event
1b,
which
indicates
thetrigger
weight
between
the
status
to
an
of
intra-frequency
report).
the
best
cell
instatus
themeasurement
quality
event
and
the
to
leave
event,
which
judgment
andto
event, so as
avoid the trigger
measurement
andsmall
the
status change quantity
due to very
event
type.
change.
The
larger the value is, the larger
indicates
the maximum
number
the difference
between the
of
intra-frequency
measurement
status to trigger the event and
event,
which
is 7. the event will
the status
to leave
be.
This parameter
parameter indicates
is related the
to the
This
measurement
quantity
and
the
absolute threshold
value
used
event
type.
for event 1e/1f.
Different
events are configured
separately
and
can be number
indicates the
maximum
configured
with
different
of intra-frequency
measurement
hysteresis
event,
which is 7.
event, which is 7
0: 0
1: 10
2:
20
0..7
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 1
200
0:
10:
1: 2240
11:
2: 4320
12:
3: 8640
13:
1280
4: 16
14:
2560
5: 0
32
0:
15:64
5000
6:
1: 250
7:
Infinity
2: 500
3: 1000
4: 2000
5: 4000
6: 8000
7:
0: 16000
0
1: 1
0..2147483647
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..715
13: 17
14: 19
0: 1a
1: 1b
2: 1c
3: 1d
4: 1e
5: 1f
6: 1j
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0..14.5, step 0.5
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
0..7.5, step 0.5
dB
UTRAN Cell
and Service
Related
Handover Control
-115..-25, Step: 1 dBm
N/A
ms
N/A
ms
N/A
N/A
N/A
N/A
maximum number of the cells

that can exist in active set. When
the UE detects that one cell in
This
parameterset
indicates
the
the monitoring
satisfies
the
minimum
cell that
threshold number
of event of
1a,the
it first
can
exist
in the DCH
active set
judges
whether
the number
of
when
triggering
event
or inset
the cells in the current1c
active
the
E-DCH
set when
is
not
biggeractive
than
the
value
This
parameter
indicates
the
triggering
event
1j.
Whenhaving
UEIf so,
indicated
by
thisbetween
parameter.
time
difference
detects
one
cellgeneration
satisfies
event 1athat
is
If not, the
detected
thetriggered.
event
trigger
threshold
ofevent.
eventOnly
1c/1j, it
eventreporting
1a
is notthe
triggered.
and
first
checks
whether
the
number
when
the event indicates
generation
is
This
the
of
theparameter
cells
in maximum
the meets
currentnumber
active
indicates
the
detected
and
still
all
maximum
times
to the
report
the
set
is smaller
than
value
of
intra-frequency
measurement
requirements
of
event
triggering
measurement
report
after
indicated
by
If so,
event,
which
is
7.parameter.
after
Time
to this
trigger,
the event
triggering
event
event
1c/1j
is not1a/1b/1c/1j
triggered.
If the
can
be
triggered
and
reported.
(because
are reported
value
is 0,they
the
parameter
is
The
larger
theAfter
value
is, the
periodically).
event
invalid.
stricter
the judgment
is for
1a/1b/1c/1j
is triggered,
thethe
UE
event
to
be
triggered.
The
reports
the
measurement
results
indicates
maximum
number
parameterthe
should
be set
according
to
the report
intervals.
of intra-frequency
measurement
according
to
the
actual
If
the times
reports
event,
whichofisevent
7
requirements.
Sometimes,
it is
exceeds the value
indicatedif by
set
too
large,
the
quality
of
calls
This
parameter
indicates
the
this parameter, UE stops
may
decrease.
time
interval
report the
reporting
the to
measurement
measurement
results
results.
If the result
of after
judgment
This
parameter
indicates
the
indicates that
the
maximum
number
triggering
event
1a/1b/1c/1j
indicates
event
1a/1b/1c/1j
filtering factor that UE
performs
of
intra-frequency
measurement
(because
theyreporting
are
reported
finishes,
stop
the
the L3 filtering
on the
event,
which
is
7.
periodically).
After
event
measurement
results
even
measurement results of thethe
intra1a/1b/1c/1j
is triggered,
the UE
times
of report
do not reach
the
frequency
measurement.
reports
the measurement
results
value
indicated
by this
UE
executes
intra-frequency
according
intervals.
parameter.to the
measurement
onreport
L1 in the
fixed
cycle
(measure
several
points
in
This
parameter
indicatesnumber
Object
indicates
the
indicates
the maximum
maximum
number
one
measurement
cycle
and
L1
ID
of Intra-frequency
event
of
intra-frequency
measurement
of
intra-frequency
measurement
filters
the measurement
results.
measurement
configuration
event,
which
is
7.
event,
which can
is 7. be decided by
This
method
unrelated to traffic category.
UE freely). Then L1 reports to L3
at intervals and L3 filters the
This
indicates
Object
latestparameter
measurement
results
and
ID
of
Intra-frequency
period
the measurement results saved
measurement
previously. Theconfiguration
filtering shallfor
be
CPICH EcNo.
performed
according to the
3GPP TS 25.331: "RRC Protocol
Specification" : Fn= (1-a)*FnThis
parameter
indicates
1+a*Mn
, a = 1/2^
(k/2) . the
maximum
times
to
report the
the
Fn isparameter
the updated
filtered
This
indicates
measurement
results
in
measurement
result
filtering factor that UE performs
periodical
uses this
Fn-1
thereporting.UE
previous
the L3isfiltering
on thefiltered
parameter
to
judge
whether
it
measurement
result
measurement results of the intraneeds
to report
more
Mn is the
latest
received
frequency
measurement.
measurement
results.
measurement
result If the
UE
executes intra-frequency
times
of
event
reports
exceeds
a = 1/2^ (k/2), where
the
value
measurement
on
L1 in
the
fixedof
the
value
indicated
by
kcycle
is
the
Filter
Coefficient.
This parameter
the in
(measure indicates
severalthis
points
parameter,
UE
stops
reporting
NOTE:
if kinterval
is
set
to
0periodic
thatand
will L1
reporting
for
one
measurement
cycle
the
measurement
results.
mean
no
layer
3
filtering.
reporting
mode.
UE
reports
the
filters the measurement results.
This method
formula can
indicates
that theby
measurement
results
according
This
be decided
smaller
the Then
value
of reports
the filtering
to
the
report
intervals.
UE
freely).
L1
to L3
factor
is, theand
larger
effect the
the
at
intervals
L3 filters
This
indicates
Object
current
measurement
result
will
latestparameter
measurement
results
and
ID
of
Intra-frequency
period
have
on
the
measurement
result
measurement
configuration
reported
to The
RNC
(periodical
previously.
filtering
shallfor
be
CPICH
RSCP.
report) or
the
judgment
performed
according
to (event
the
report). formula described in
following
Specification" : Fn= (1-a)*Fn1+a*Mn , a = 1/2^ (k/2) .
Fn is the updated filtered
measurement result
Fn-1 is the previous filtered
measurement result
Mn is the latest received
measurement result
a = 1/2^ (k/2), where the value of
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
0..7
0: 0
1: 10
2:
20
0..7
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 1
200
0:
10:
1: 2240
11:
2: 4320
12:
3: 8640
13:
1280
4: 16
14:
2560
5: 0
32
0:
15:64
5000
6:
1: 250
7:
Infinity
2: 500
3: 1000
4: 2000
5: 4000
6: 8000
7: 16000
0..2147483647
0: 0
1: 1
0..2147483647
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
0:
9: 1
9
1:
10:211
1:
2:
413
11:250
2:
3:
815
12:500
3:
4:
16
13:1000
17
4:
5:
32
14:2000
19
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
0:
12:024000
1:
128000
13:
0..2147483647
2:
14:232000
3:
15:364000
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12: 15
13: 17
14: 19
N/A
N/A
ms
N/A
ms
N/A
N/A
N/A
N/A
ms
N/A
N/A

maximum
timesindicates
to report the
the
This parameter
measurement
results
in
periodical
reporting.UE
the L3 filtering
on the uses this
parameter
to
judge
whether
it
measurement results
of the intraneeds
to
report
more
frequency measurement.
measurement
results. If the
UE executes intra-frequency
times
of
event
reports
measurement on
L1 inexceeds
the fixed
the
value
indicated
by this
This parameter
the in
cycle
(measure indicates
several
points
parameter,
UE stops
reporting
reporting
interval
for
periodic
one
measurement
cycle
and L1
the
measurement
results.
reporting
UE
reports
the
filters
the mode.
measurement
results.
measurement
results
according
This
method can
be decided
by
to the
reportThen
intervals.
UE
freely).
L1 reports to L3
This
indicates
Object
latestparameter
measurement
results
and
ID
of
Intra-frequency
detected
set
measurement
configuration
previously.
The filtering
shall be
for CPICH EcNo.
performed
according to the
Specification" : Fn= (1-a)*Fn1+a*Mn
, a = 1/2^
(k/2) . the
This parameter
controls
Fn is the updated
triggering
of event filtered
1a/1b. 1a is
measurement
easier but 1b isresult
harder to trigger
This
indicates
the
Fn-1
isthis
thevalue
previous
filtered
whenparameter
increases;
and
hysteresis
used
when
judging
measurement
result
vice
verse.
This
is used
for This
whether
trigger
the event.
Mn
isparameter
thetolatest
received
quality
judgment
of
event
1a and
parameter
makes
it
different
measurement
result
indicates
the
maximum
numberof
1b,
which
indicates
the
weight
between
the
status
to
trigger
anof
a =intra-frequency
1/2^ (k/2), where
the value
of
the
cell
inCoefficient.
themeasurement
quality
event
the
status
to
leave
kevent,
is best
theand
Filter
which
judgment
and
event,
NOTE:so
if kas
is to
setavoid
to 0 the
thattrigger
will
measurement
andsmall
the
status
change
due
to very
mean no
layer quantity
3 filtering.
event
type.
change.
This formula indicates that the
The
larger
value
is, the
larger
smaller
thethe
value
of the
filtering
indicates
the
maximum
number
This
parameter
indicates
the
the
difference
between
the
of
intra-frequency
maximum
number
ofevent
the
cells
status
tomeasurement
trigger
themeasurement
and
current
result
will
event,
which
is
7.
that
can
exist
in
active
set. result
When
the
to measurement
leave
the event
will
havestatus
on the
This
parameter
indicates
thein
the
UE
detects
one cell
be.
reported
to RNCthat
(periodical
time
difference
between
having
the
monitoring
set
satisfies
This
parameter
is related
tothe
the
report)
or the judgment
(event
detected
the
event
generation
threshold
of
event
1a,
it
first
measurement
quantity
and
the
report).
and
the
event.
Onlyof
judges
whether
the
number
eventreporting
type.
when
the
event
generation
is set
the
cells
in
the current
active
This
parameter
indicates
the
Different
events
are configured
detected
and
still
meets
all
is
not
bigger
than
the
value
maximum
to report
separatelytimes
and can
be the
requirements
of
event
triggering
indicated
this
parameter.
If so,
measurement
report
after
configuredbywith
different
after
Time
to
trigger,
the
event
event
1a
is
triggered.
If
not,
triggering
event
1a/1b/1c/1j
hysteresis
can
be1a
triggered
and
reported.
event
isthey
not are
triggered.
(because
reported
The
larger
the
value
is,
periodically).
eventthe
indicates the After
maximum
number
stricter
the
judgment
is for
indicates
the
maximum
number
1a/1b/1c/1j
is triggered,
thethe
UE
of intra-frequency
measurement
event
to
be
triggered.
The
of
intra-frequency
measurement
reports
the measurement
results
event, which
is 7
parameter
should
be set
event, which
is 7.report
according
to
the
intervals.
according
actual
If the timestoofthe
event
reports
requirements.
Sometimes,
it is
exceeds the value
indicatedif by
set
too
large,
the
quality
of
calls
This
parameter
indicates
the
may
decrease.
time
interval
report the
reporting
the to
measurement
measurement
results
results. If the result of after
judgment
indicates that
the
maximum
number
triggering
event
1a/1b/1c/1j
indicates
event
1a/1b/1c/1j
of
intra-frequency
(because
theyreporting
are measurement
reported
finishes,
stop
the
event,
which is
7. event
periodically).
After
measurement
results
even the
1a/1b/1c/1j
is
triggered,
the UE
times of report do not reach
the
reports
the
measurement
results
value indicated by this
according
parameter.to the report intervals.
This
parameter
indicatesnumber
Object
indicates
the
indicates
the maximum
maximum
number
ID
of
Intra-frequency
detected
of
intra-frequency
measurement
set
measurement
event,
which
event,
which is
is 7.
7. configuration
for CPICH Rscp.
0: 1
1: 2
1:
2: 250
4
2:
3: 500
8
3:
4: 1000
16
4:
5: 2000
32
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
0:
12:024000
1:
128000
13:
0..2147483647
2:
14:232000
3:
15:364000
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
15 step 0.5
0..14.5,
13: 17
14: 19
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
0..7.5, step 0.5
dB
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
0: 0
1: 10
2:
20
0..7
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 1
200
0:
10:
1: 2240
11:
2: 4320
12:
3: 8640
13:
1280
4: 16
14:
2560
5: 0
32
0:
15:64
5000
6:
1: 250
7:
Infinity
2: 500
3: 1000
4: 2000
5: 4000
6: 8000
7: 16000
0..2147483647
N/A
ms
N/A
N/A
dB
N/A
ms
N/A
ms
N/A

latest measurement results and
previously. The filtering shall be
performed according to the
Specification" : Fn= (1-a)*Fn1+a*Mn
, a = 1/2^
(k/2) . the
This parameter
controls
Fn is the updated
triggering
of event filtered
1a/1b. 1a is
measurement
easier but 1b isresult
harder to trigger
This
indicates
the
Fn-1
isthis
thevalue
previous
filtered
whenparameter
increases;
and
hysteresis
used
when
judging
measurement
result
vice
verse.
This
is used
for This
whether
trigger
the event.
Mn
isparameter
thetolatest
received
quality
judgment
of
event
1a and
parameter
makes
it
different
measurement
result
indicates
the
maximum
numberof
1b,
which
indicates
the
weight
between
the
status
to
trigger
anof
a =intra-frequency
1/2^ (k/2), where
the value
of
the
cell
inCoefficient.
themeasurement
quality
event
the
status
to
leave
kevent,
is best
theand
Filter
which
judgment
and
event,
NOTE:so
if kas
is to
setavoid
to 0 the
thattrigger
will
measurement
andsmall
the
status
change
due
to very
mean no
layer quantity
3 filtering.
event
type.
change.
The
larger
value
is, the
larger
smaller
thethe
value
of the
filtering
indicates
the
maximum
number
This
parameter
indicates
the
the
difference
between
the
of
intra-frequency
maximum
number
ofevent
the
cells
status
tomeasurement
trigger
themeasurement
and
current
result
will
event,
which
is
7.
that
can
exist
in
active
set. result
When
the
to measurement
leave
the event
will
havestatus
on the
This
parameter
indicates
thein
the
UE
detects
one cell
be.
reported
to RNCthat
(periodical
time
difference
between
having
the
monitoring
set
satisfies
This
parameter
is related
tothe
the
report)
or the judgment
(event
detected
the
event
generation
threshold
of
event
1a,
it
first
measurement
quantity
and
the
report).
and
the
event.
Onlyof
judges
whether
the
number
eventreporting
type.
when
the
event
generation
is set
the
cells
in
the current
active
This
parameter
indicates
the
Different
events
are configured
detected
and
still
meets
all
is
not
bigger
than
the
value
maximum
to report
separatelytimes
and can
be the
requirements
of
event
triggering
indicated
this
parameter.
If so,
measurement
report
after
configuredbywith
different
after
Time
to
trigger,
the
event
event
1a
is
triggered.
If
not,
triggering
event
1a/1b/1c/1j
hysteresis
can
be1a
triggered
and
reported.
event
isthey
not are
triggered.
(because
reported
The
larger
the
value
is,
periodically).
eventthe
indicates the After
maximum
number
stricter
the
judgment
is for
indicates
the
maximum
number
1a/1b/1c/1j
is triggered,
thethe
UE
of intra-frequency
measurement
event
to
be
triggered.
The
of
intra-frequency
measurement
reports
the measurement
results
event, which
is 7
parameter
should
be set
event, which
is 7.report
according
to
the
intervals.
according
actual
If the timestoofthe
event
reports
requirements.
Sometimes,
it is
exceeds the value
indicatedif by
set
too
large,
the
quality
of
calls
This
parameter
indicates
the
may
decrease.
time
interval
report the
reporting
the to
measurement
measurement
results
results. If the result of after
judgment
indicates that
the
maximum
number
triggering
event
1a/1b/1c/1j
indicates
event
1a/1b/1c/1j
of
intra-frequency
(because
theyreporting
are measurement
reported
finishes,
stop
the
event,
which is
7. event
periodically).
After
measurement
results
even the
1a/1b/1c/1j
is
triggered,
the UE
times of report do not reach
the
reports
the
measurement
results
according
parameter.to the report intervals.
This
parameter
indicatesnumber
Object
indicates
the
indicates
the maximum
maximum
number
ID
of
Inter-frequency
of
intra-frequency
measurement
measurement
event,
7.
event, which
which is
isprofile
7.
configuration.
0: 0
1: 1
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
15 step 0.5
0..14.5,
13: 17
14: 19
N/A
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
0..7.5, step 0.5
dB
0: 0
1: 10
2:
20
0..7
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 1
200
0:
10:
1: 2240
11:
2: 4320
12:
3: 8640
13:
1280
4: 16
14:
2560
5: 0
32
0:
15:64
5000
6:
1: 250
7:
Infinity
2: 500
3: 1000
4: 2000
5: 4000
6: 8000
7: 16000
dB
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
Handover Control
0..99
N/A

scenarios.For each scenario, the UTRAN Cell
corresponding parameters can
be set as different values.
Handover Control
0: Outdoor Scene
1: High-Mobility
Outdoor Scene
N/A
2: Indoor Scene
3: Subway/ tunnel
Scene

ID of Inter-frequency
measurement configuration
related to traffic category.
Parameter
0..2147483647
The parameter indicates Interfrequency measurement profile

identity.
RNC
N/A
ms
N/A
ms
N/A
different sets of handover

the
L3 filtering
on the to different
parameter
according
measurement
results
of theofintertraffic type. Taking account
frequency
measurement.
various characteristic of service,
UE
executes
it should
haveinter-frequency
various handover
measurement
on as
L1 hysteresis,
in the fixed
parameters such
cycle
(measure
several
points
in
absolute threshold for 2b/2d
etc..
one
measurement
cycle
and
L1
Altogether there are 9 sets of
filters
the measurement
configuration
for differentresults.
This
method
can
decided
by
scenario based onbeservice
type,
UE
freely).
Then
L1
reports
to
L3
transport channel type,
at
intervals
and
L3
filters
the
single/multi
RAB.
This
parameter
indicates
Object
latest
measurement
results
When
the
parameter
is 0xff,and
if
ID
of
Inter-frequency
event
the
measurement
results is
saved
the
period
measurement
used,
measurement
previously.
Theconfiguration
filtering
shallfor
be
this
configuration
isn't related
to
CPICH
Ec/No
(UTRAN).
performed
according
to
the
specific service but all the
following
service. formula described in
Specification" : Fn = (1-a)*Fn-1
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
This
parameter
indicates
the
measurement
result
event triggered
number is
related
to the
event
by
the
intera = 1/2^ (k/2),
where
the value of
judgment
method
of interfrequency
measurement,
kfrequency
is the Filter
Coefficient. which
handover.
is
related
NOTE:
if ktoisthe
setmeasurement
to 0 that will
quantity.
mean
no
layer
3
filtering.
This
MAX_INTER_MEAS_EVENT
This
formula
indicates
the
absolute
threshold
thatthat
is
indicates
thevalue
maximum
number
smaller
the
of
the
filtering
required
to be configured
for
of
inter-frequency
measurement
factor
is, the larger
effect
the
event
2b/2d/2f
(used
when
event,
which
is
6.
current
measurement
result will
judging
the quality
of the
This
parameter
is used
for result
have
on
the
measurement
currently
used frequency.
quality
judgment
for
the
carrier of
reported
to RNC (periodical
MAX_INTEREAS_EVENT
is the
currently
used
frequency,
which
report)
or the
judgment
(event
maximum
number
of
interindicates
the weight
of thethe
best
report).
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which
relatedisto6.
measurement
whether
tothe
trigger
the event. This
quantity
and
theindicates
event
type
This
parameter
the(only
parameter
makes
it different
for
event
2a/2b/2d/2f).
time
difference
between
having
between the status to trigger an
MAX_INTEREAS_EVENT
is the
detected
event andthe
theevent
statusgeneration
to leave
the
maximum
number
of
interand
reporting
the
event.
Only
event, so as to avoid the trigger
frequency
measurement
when
event
generation
is
statusthe
change
due
to veryevent
small
which
is 6.
detected
and still meets
change.
Different
eventsall
are
requirements
of event and
triggering
configured separately
can
after
Time to trigger,
the event
be configured
with different
can
values.
The
larger the value is, the is the
MAX_INTEREAS_EVENT
stricter
thenumber
judgment
for the
maximum
of is
interThis
parameter
indicates
the
event
to bemeasurement
triggered.
Theevent
frequency
absolute
threshold
that
is
parameter
which is 6. should be set
required
configured
accordingtotobethe
actual for
event
2b/2c/2eSometimes,
(used whenif it is
requirements.
judging
the quality
of the of
notcalls
set too large,
the quality
This
parameter
used
frequency).is used when
may decrease.
judging
the quality of the cells
of
MAX_INTEREAS_EVENT
is
MAX_INTEREAS_EVENT
is the
the
not
used
frequencies.
This
maximum
number
of
intermaximum number of interparameter
indicates the weight
frequency
event
frequency measurement
measurement
event of
the
best
cell
in
the
quality
which
which is
is 6.
6.
judgment (only for event
2a/2b/2c/2e).
MAX_INTEREAS_EVENT is the
maximum number of interfrequency
measurement
This parameter
indicates event
Object
which
is
6.
ID of Inter-frequency event
measurement configuration for
CPICH RSCP (UTRAN).
DSCH/UL DCH)
4: Single NRT
RAB on DL HSDSCH/UL E-DCH
(Single NRT RAB
5: All Multi-NRT
RAB on DL
DCH/UL DCH (All
Multi-NRT RAB on
DL
0: 0DCH/UL DCH)
6: 1
Multi-NRT RAB,
1:
0..2147483647
HSPA
2:
2 is Involved
and
3:
3 only DCHs are
Used
4:
4 in UL (MultiNRT
5: 5 RAB, HSPA
is
and
6: Involved
6
only
7:
7 DCHs are
Used
8:
8 in UL)
7: 9
Multi-NRT RAB,
9:
HSPA
10:
11 is Involved
and
E-DCH is
11: 13
Used
12:
1..615in UL (MultiNRT17RAB, HSPA
13:
is Involved
and E14:
19
DCH
0:
2a is Used in
UL)
1:
2b
8:
2: Multi
2c Rab
Including
CS and
3: 2d
PS
(Multi
Rab
4: 2e
Including
CS and
5:
2f
PS)
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
-24..0, step 1
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
0: 0
1: 10
2:
20 step 0.5
0..14.5,
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-24..0,
step 1
13: 1280
14: 2560
15: 5000
N/A
N/A
N/A
N/A
N/A
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
RNC
Parameter
0..2147483647
N/A
dB
ms
dB

latest measurement results and
previously. The filtering shall be
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
This
parameter
indicates
the
measurement
result
event triggered
number is
related
to the
event
by
the
intera = 1/2^ (k/2),
where
the value of
judgment
method
of interfrequency
measurement,
kfrequency
is the Filter
Coefficient. which
handover.
is
related
NOTE:
if ktoisthe
setmeasurement
to 0 that will
quantity.
mean
no
layer
3
filtering.
This
This
formula
indicates
the
absolute
threshold
thatthat
is
indicates
thevalue
maximum
number
smaller
the
of
the
filtering
required
to be configured
for
of
inter-frequency
measurement
factor
is, the larger
effect
the
event
2b/2d/2f
(used
when
event,
which
is
6.
current
measurement
result will
judging
the quality
of the
This
parameter
is used
for result
have
on
the
measurement
currently
used frequency.
quality
judgment
for
the
carrier of
reported
to RNC (periodical
MAX_INTEREAS_EVENT
is the
currently
used
frequency,
which
report)
or the
judgment
(event
maximum
number
of
interindicates
the weight
of thethe
best
report).
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which
relatedisto6.
measurement
whether
tothe
trigger
the event. This
quantity
and
theindicates
event
type
This
parameter
the(only
parameter
makes
it different
for
event
2a/2b/2d/2f).
time
difference
between
having
MAX_INTEREAS_EVENT
is the
detected
event andthe
theevent
statusgeneration
to leave
the
maximum
number
of
interand
reporting
the
event.
Only
frequency
measurement
when
event
generation
is
statusthe
change
due
to veryevent
small
which
is 6.
detected
and still meets
change.
Different
eventsall
are
requirements
of event and
triggering
can
after
Time to trigger,
the event
be configured
with different
can
values.
The
larger the value is, the is the
MAX_INTEREAS_EVENT
stricter
thenumber
judgment
for the
maximum
of is
interThis
parameter
indicates
the
event
to bemeasurement
triggered.
Theevent
frequency
absolute
threshold
that
is
parameter
be set the
whichparameter
is 6. should
This
indicates
required
totobethe
configured
for
according
actual
filtering factor
that
UE performs
event
2b/2c/2e
(used
when
requirements.
Sometimes,
if it is
the L3 filtering on the
judging
the
quality
of
the
not
set
too
large,
the
quality
of
measurement
results
ofwhen
thecalls
interThis
parameter
is used
used
frequency).
may decrease.
frequency
measurement.
judging
the quality of the cells
of
MAX_INTEREAS_EVENT
is
MAX_INTEREAS_EVENT
is the
the
UE
executes
inter-frequency
not
used
frequencies.
This
maximum
number
of
intermaximum number
of in
inter- fixed
measurement
on L1
parameter
indicates
thethe
weight
frequency
measurement
event
frequency
measurement
eventinof
cycle
(measure
several
points
the
best
cell
in
the
quality
which
is
which
is 6.
6.
one
measurement
cycle and L1
judgment
(only for event
filters
the
measurement
results.
2a/2b/2c/2e).
This
method
can
be
decided
by
UE
freely).
Then
L1
reports
to
L3
maximum number of interat
intervals
and
L3
filters
the
frequency
measurement
event
This
parameter
indicates
Object
latest
measurement
results
and
which
is
6.
ID
of
Inter-frequency
event
measurement
filtering shallfor
be
CPICH Ec/No
(GSM).to the
performed
according
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
measurement
result
event number is
related to the
a = 1/2^ (k/2),
where
the value of
judgment
method
of interkfrequency
is the Filter
Coefficient.
handover.
NOTE: if k is set to 0 that will
mean no layer 3 filtering.
0: 0
1: 1
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..615
13: 17
14: 19
0: 2a
1: 2b
2: 2c
3: 2d
4: 2e
5: 2f
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2:
20 step 0.5
0..14.5,
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-115..-25,
13: 1280 step 1
14: 2560
15: 5000
0.0..2.0, step 0.1
0: 0
1: 1
0..2147483647
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..615
13: 17
14: 19
N/A
N/A
N/A
dB
ms
dBm
N/A
N/A
N/A
N/A

event triggered by the interfrequency measurement, which
is related to the measurement
quantity.
This
absolute
that is
indicates threshold
the maximum
number
required
to be configured
for
of inter-frequency
measurement
event
when
event,2b/2d/2f
which is (used
6.
judging
the quality
of thefor
This
parameter
is used
currently
used frequency.
quality judgment
for the carrier of
MAX_INTEREAS_EVENT
is the
currently used frequency, which
maximum
number
of
interindicates
the weight
of thethe
best
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which
relatedisto6.
measurement
whether
tothe
trigger
the event. This
quantity
and
theindicates
event
type
This
parameter
the(only
parameter
makes
it different
for
event
2a/2b/2d/2f).
time
difference
between
having
between
the status
to trigger
an
This
parameter
indicates
the
MAX_INTEREAS_EVENT
is the
detected
the
event
generation
event
and
the
status
to
leave
the
filtering
factor
thatevent.
UE
performs
maximum
number
of interand
reporting
the
Only
event,
so
as
to
avoid
the
trigger
the
L3the
filtering
on
the
frequency
measurement
event
when
event
generation
is
status
change
due
to very
small
measurement
results
of the
interwhich is 6.
detected
and still meets
all
change.
Different
events
are
frequency
measurement.
requirements
of event and
triggering
configured
separately
can
UE
executes
inter-frequency
after
Time to trigger,
the event
be
configured
with
different
measurement
onand
L1 in
the fixed
can
be triggered
reported.
values.
cycle
(measure
several
points in
The
MAX_INTEREAS_EVENT
is the
one
measurement
cycle
and
stricter
thenumber
judgment
is
for
theL1
maximum
of
interfilters
the
measurement
results.
event
to be
triggered. The
frequency
measurement
event
This
method
can
be
decided
by
parameter
should be set
which
is
6.
UE
freely).
Then
L1
reports
to
L3
according to the actual
at
intervals
and
L3
filters
the
requirements.
Sometimes,
if it is
This
parameter
indicates
Object
latest
measurement
results
and
set
too
large,
the
quality
of
calls
ID
ofmeasurement
Inter-frequency
event
the
results
saved
may
decrease.configuration for
measurement
previously.
The filtering shall
be
MAX_INTEREAS_EVENT
CPICH RSCP
(GSM).to theis the
performed
according
maximum number of interfollowing
described
in
frequencyformula
measurement
event
3GPP
TS
25.331:
"RRC
Protocol
which is 6.
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
This
parameter
indicates
the
measurement
result
event triggered
number is
related
to the
event
by
the
intera = 1/2^ (k/2),
where
the value of
judgment
method
of interfrequency
measurement,
kfrequency
is the Filter
Coefficient. which
handover.
is
related
NOTE:
if ktoisthe
setmeasurement
to 0 that will
quantity.
mean
no
layer
3
filtering.
This
This
formula
indicates
the
absolute
threshold
thatthat
is
indicates
thevalue
maximum
number
smaller
the
of
the
filtering
required
to be configured
for
of
inter-frequency
measurement
factor
is, the larger
effect
the
event
2b/2d/2f
(used
when
event,
which
is
6.
current
measurement
result will
judging
the quality
of the
This
parameter
is used
for result
have
on
the
measurement
currently
used frequency.
quality
judgment
for
the
carrier of
reported
to RNC (periodical
MAX_INTEREAS_EVENT
is the
currently
used
frequency,
which
report)
or the
judgment
(event
maximum
number
of
interindicates
the weight
of thethe
best
report).
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which isto6.the
related
measurement
whether to trigger
the event. This
quantity
and
the event
type (only
parameter
makes
it different
for
event
2a/2b/2d/2f).
MAX_INTEREAS_EVENT
is the
event and the status to leave
the
maximum
number
of
interevent, so as to avoid the trigger
frequency
measurement
status
change
due to veryevent
small
which
is 6.
change.
Different events are
configured separately and can
be configured with different
values.
maximum number of interfrequency measurement event
which is 6.
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
UTRAN Cell
and Service
Related
Handover Control
-24..0, step 1
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
0: 0
1: 10
2:
20 step 0.5
0..14.5,
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..615
13: 17
14: 19
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
0..14.5, step 0.5
dB
dB
ms
N/A
N/A
N/A

the
L3the
filtering
the
when
eventon
generation
is
measurement
results
of the
detected and still meets
all interfrequency
measurement.
requirements
of event triggering
UE
inter-frequency
afterexecutes
Time to trigger,
the event
measurement
onand
L1 in
the fixed
can be triggered
reported.
cycle
(measure
several
points in
The larger the value is, the
one
measurement
cycle
and
stricter the judgment is for
theL1
filters
the
measurement
results.
event to be triggered. The
This
method
can be
by
parameter
should
bedecided
set
UE
freely).
Then
L1
reports
to
L3
at
intervals
and
L3
filters
the
requirements.
Sometimes,
if it is
This
parameter
indicates
Object
latest
measurement
results
and
set
too
large,
the
quality
of
calls
ID
ofmeasurement
Inter-frequency
event
the
results
saved
may
measurement
previously.
The filtering shall
MAX_INTEREAS_EVENT
is be
the
CPICH Ec/No
(EUTRAN).
performed
according
to
the
described
in
frequencyformula
measurement
event
3GPP
TS
25.331:
"RRC
Protocol
which is 6.
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
This
parameter
indicates
the
measurement
result
event triggered
number is
related
to the
event
by
the
intera = 1/2^ (k/2),
where
the value of
judgment
method
of interfrequency
measurement,
kfrequency
is the Filter
Coefficient. which
handover.
is
related
NOTE:
if ktoisthe
setmeasurement
to 0 that will
quantity.
mean
no
layer
3
filtering.
This
This
formula
indicates
the
absolute
threshold
thatthat
is
indicates
thevalue
maximum
number
smaller
the
of
the
filtering
required
to be configured
for
of
inter-frequency
measurement
factor
is, the larger
effect
the
event
2b/2d/2f
(used
when
event,
which
is
6.
current
measurement
result will
judging
the quality
of the
This
parameter
is used
for result
have
on
the
measurement
currently
used frequency.
quality
judgment
for
the
carrier of
reported
to RNC (periodical
MAX_INTEREAS_EVENT
is the
currently
used
frequency,
which
report)
or the
judgment
(event
maximum
number
of
interindicates
the weight
of thethe
best
report).
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which
relatedisto6.
measurement
whether
tothe
trigger
the event. This
quantity
and
theindicates
event
type
This
parameter
the(only
parameter
makes
it different
for
event
2a/2b/2d/2f).
time
difference
between
having
between
the status
to trigger
an
This
parameter
indicates
the
MAX_INTEREAS_EVENT
is the
detected
the
event
generation
event
and
the
status
to
leave
the
filtering
factor
thatevent.
UE
performs
maximum
number
of interand
reporting
the
Only
event,
so
as
to
avoid
the
trigger
the
L3the
filtering
on
the
frequency
measurement
event
when
event
generation
is
status
change
due
to very
small
measurement
results
of the
interwhich
is
6.
detected
and still meets
all
change.
Different
events
are
frequency
measurement.
requirements
of event and
triggering
configured
separately
can
UE
executes
inter-frequency
after
Time to trigger,
the event
be
configured
with
different
measurement
onand
L1 in
the fixed
can
be triggered
reported.
values.
cycle
(measure
several
points in
The
MAX_INTEREAS_EVENT
is the
one
measurement
cycle
and
stricter
thenumber
judgment
is
for
theL1
maximum
of
interfilters
the
measurement
results.
event
to be
triggered. The
frequency
measurement
event
This
method
can
be
decided
by
parameter
should be set
which
is
6.
UE
freely).
Then
L1
reports
to
L3
at
intervals
and
L3
filters
the
requirements.
Sometimes,
if it is
This
parameter
indicates
Object
latest
measurement
results
and
set
too
large,
the
quality
of
calls
ID
ofmeasurement
Inter-frequency
event
the
results
saved
may
measurement
previously.
The filtering shall
MAX_INTEREAS_EVENT
is be
the
CPICH RSCP
(EUTRAN).
performed
according
to
the
described
in
frequencyformula
measurement
event
3GPP
TS
25.331:
"RRC
Protocol
which is 6.
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered how
This
indicates
measurement
result
many events are
required to be
Fn-1
is the for
previous
configured
the setfiltered
of the
measurement
measurement result
parameters for a
Mn
is the
latest received
certain
purpose.
The defined
measurement
result
event number is
related to the
a = 1/2^ (k/2),
where
the value of
judgment
method
of interkfrequency
is the Filter
Coefficient.
handover.
NOTE: if k is set to 0 that will
mean no layer 3 filtering.
0: 0
1: 10
2: 20
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..615
13: 17
14: 19
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
UTRAN Cell
and Service
Related
Handover Control
-24..0, step 1
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2:
20 step 0.5
0..14.5,
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..615
13: 17
14: 19
ms
N/A
N/A
N/A
dB
ms
N/A
N/A
N/A

event triggered by the interfrequency measurement, which
is related to the measurement
quantity.
This
absolute
that is
indicates threshold
the maximum
number
required
to be configured
for
of inter-frequency
measurement
event
when
event,2b/2d/2f
which is (used
6.
judging
the quality
of thefor
This
parameter
is used
currently
used frequency.
quality judgment
for the carrier of
MAX_INTEREAS_EVENT
is the
currently used frequency, which
maximum
number
of
interindicates
the weight
of thethe
best
This
parameter
indicates
frequency
measurement
event
cell
in
the
quality
judgment
and is
hysteresis
used when judging
which
relatedisto6.
measurement
whether
tothe
trigger
the event. This
quantity
and
theindicates
event
type
This
parameter
the(only
parameter
makes
it different
for
event
2a/2b/2d/2f).
time
difference
between
having
MAX_INTEREAS_EVENT
is the
detected
event andthe
theevent
statusgeneration
to leave
the
maximum
number
of
interand
reporting
the
event.
Only
frequency
measurement
when
event
generation
is
statusthe
change
due
to veryevent
small
which is 6.
detected
and still meets
change.
Different
eventsall
are
requirements
of event and
triggering
can
This
parameter
indicates
the
after
Time to trigger,
the event
be configured
with
different
filtering
factor thatand
UEreported.
performs
can
be triggered
values.
the
L3
filtering
on
the
The
larger
the
value
is,
the is the
MAX_INTEREAS_EVENT
measurement
results
offor
thethe
interstricter
thenumber
judgment
maximum
of is
interfrequency
event
to bemeasurement.
triggered. Theevent
frequency
measurement
UE
executes
inter-frequency
parameter
be set
which
is 6. should
measurement
onactual
L1 in the fixed
according to the
cycle
(measureSometimes,
several points
requirements.
if it in
is
This parameter
indicates
Object
one
measurement
cycle
and
L1
set
too
large,
the
quality
of
calls
ID of Inter-frequency event
filters
the measurement
results.
may
decrease.
measurement
configuration
This
method
can
be
decided
by
MAX_INTEREAS_EVENT
unrelated to traffic category.is the
UE
freely).
Then
L1
reports
to
L3
maximum number of interat
intervalsmeasurement
and L3 filters event
the
frequency
This
indicates
Object
latest
measurement
results
and
whichparameter
is 6.
ID
of
Inter-frequency
period
measurement
filtering shallfor
be
CPICH EcNo.
performed
according to the
+a*Mn , a = 1/2^ (k/2) .
Fn isparameter
the updated
filtered the
This
indicates
This
parameter
indicates
the
measurement
result
filtering
factor that
UE performs
times
of
the
periodical
reports
to
Fn-1
is
the
previous
filtered
the L3 filtering on the
be
reported.
If
the
UE
detects
measurement
result
measurement results of the interthat
ofreceived
event reports
Mn isthe
thetimes
latest
frequency
measurement.
exceeds
the
value
of Amount of
measurement
result
UE
executes inter-frequency
reporting,
UE
stops
the
a = 1/2^ (k/2), where
thethe
value
of
measurement
on L1reporting
in
fixed
measurement
results.
kcycle
is
the
Filter
Coefficient.
This parameter
the in
(measure indicates
several points
NOTE:
if of
k is
set tocycle
0 that
will L1
intervals
periodical
reporting.
one
measurement
and
mean
no
layer
3
filtering.
For
the
periodical
report,
the
UE
This method
formula
indicates
thatresults
theby
reports
the measurement
This
can
be decided
smaller
the Then
valueL1
of reports
the filtering
on
this
parameter.
UE
freely).
to L3
factor
is, theand
larger
effect the
the
at
intervals
L3 filters
This
indicates
Object
current
measurement
result
will
latestparameter
measurement
results
and
ID
of
Inter-frequency
period
have
on
the
measurement
result
measurement
configuration
reported
to The
RNC
(periodical
previously.
filtering
shallfor
be
CPICH
RSCP.
report) or
the
judgment
performed
according
to (event
the
report). formula described in
following
+a*Mn , a = 1/2^ (k/2) .
measurement result
Fn-1 is the previous filtered
measurement result
measurement result
a = 1/2^ (k/2), where the value of
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2:
20 step 0.5
0..14.5,
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
0..2147483647
13: 1280
14: 2560
15: 5000
0: 0
1: 1
0..2147483647
2: 2
3: 3
4: 4
5: 5
6: 6
7: 7
8: 8
0:
9: 1
9
1:
10:211
1:
2:
413
11:250
2:
3:
815
12:500
3:
4:
16
13:1000
17
4:
5:
32
14:2000
19
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
0:
12:024000
1:
128000
13:
0..2147483647
2:
14:232000
3:
15:364000
4: 4
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12: 15
13: 17
14: 19
dB
ms
N/A
N/A
N/A
N/A
ms
N/A
N/A

times of the periodical reports to
be reported. If the UE detects
that the times of event reports
exceeds the value of Amount of
reporting, UE stops reporting the
measurement
This parameterresults.
indicates the
intervals of periodical reporting.
For the periodical report, the UE
reports the measurement results
on this parameter.
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control

ID of Inter-rat measurement
profile configuration.
RNC
Parameter
The parameter indicates InterRAT measurement profile

identity.
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control

This
parameter
indicates
be set
as different
values.the
This
parameter
differentiate
filtering
factor
that
UE performs
different sets of handover
the
L3
filtering
on
the
This
parameter
indicates
Object
parameter according to different
measurement
results
of
the
ID
of
Inter-rat
measurement
traffic type. Taking account ofintrafrequency
measurement.
configuration
related to
various characteristic
oftraffic
service,
UE
executes
itcategory.
should
haveintra-frequency
various handover
measurement
on as
L1 hysteresis,
in the fixed
parameters such
cycle
(measure
several
points
in
absolute
threshold
for 3b/3b
etc.
UE
executes
inter-RAT
one
measurement
cycle
and
L1
Altogether
there
of
measurement
onare
L1 9insets
the
fixed
filters
the measurement
results.
configuration
for
different
cyclemethod
(measure
pointsbyin
This
canseveral
decided
scenario
based
onbecycle
service
type,
onefreely).
measurement
and
UE
Then
L1
reports
toL1
L3
transport
channel
type,
filters
the measurement
results.
at
intervals
and
L3
filters
the
single/multi
RAB.
parameter
Object
This
method
canindicates
be results
decided
by
latest
measurement
When
the
parameter
is 0xff,and
if L3
ID
of
Inter-rat
event
UE
freely).
Then
L1
reports
to
the
measurement
results is
saved
the
period measurement
measurement
for
at
intervals
andconfiguration
L3 filtersshall
theused,
previously.
The
filtering
be
this
configuration
isn't
related
to
CPICH
Ec/No
(GSM).
latest
measurement
results
and
performed
according
to
the
specific
service
but
all
the
the
measurement
results saved
following
formula described
in
service.
previously.
The filtering
be
3GPP TS 25.331:
"RRCshall
Protocol
performed
according
to the
Specification"
: Fn= (1-a)*Fnfollowing
in
1+a*Mn , formula
a = 1/2^described
(k/2) .
3GPP
TS
25.331:
"RRC
Protocol
Specification"
Fn = (1-a)*Fn-1
measurement :result
+a*Mn
a =previous
1/2^ (k/2)filtered
.
Fn-1 is ,the
Fn
is the updated
filtered
measurement
result
measurement
Mn is the latestresult
received
Fn-1
is the previous
measurement
result filtered
This
parameter
indicates
how of
measurement
result
a = 1/2^
(k/2), where
the value
many
events
are
required
Mn
the
latest
received to be
k is is
the
Filter
Coefficient.
configured
for
the
of the
measurement
result
NOTE: if k is set
toset
0 that
will
measurement
parameters
for aof
a
=
1/2^
(k/2),
where
the
mean no layer 3 filtering. value
certain
purpose.
The
defined
kThis
is the
Filter
Coefficient.
formula
indicates
thatthe
the
This
parameter
event
number
isindicates
related
towill
the
NOTE:
ifthe
k isvalue
set
to
0the
that
smaller
of
filtering
event
triggered
theinter-RAT
inter-RAT
judgment
method
of
mean
no the
layer
3by
filtering.
factor
is,
larger
effect
the to
measurement,
which
is
related
handover.
This
formula
indicates result
that
the
current
measurement
will
the
measurement
quantity.
smaller
the
value
of the filtering
have
on
the
measurement
result
MAX_RAT_MEAS_EVENT
factor
is, to
theRNC
larger
effect the
reported
(periodical
indicates
the maximum
number
current
measurement
will
report)
or themeasurement
judgmentresult
(event
of
inter-RAT
event,
have
on
the
measurement
result
report).
which
is 4.
reported
to RNC (periodical
report) or the judgment (event
report).
0: 1
1: 2
1:
2: 250
4
2:
3: 500
8
3:
4: 1000
16
4:
5: 2000
32
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10:RT
16000
0:
RAB
11: 20000Voice
Including
12: 24000
(RT
RAB Including
13:
28000
Voice)
0..2147483647
14:RT
32000
1:
RAB
15: 64000 Voice
Excluding
(RT RAB
Excluding Voice)
2: Single NRT on
0..99
DL DCH/UL DCH
(Single NRT on DL
DCH/UL
DCH)
0: Outdoor
Scene
3:
Single
NRT
1: High-Mobility
RAB
on DL
HSOutdoor
Scene
DSCH/UL
DCH
2: Indoor Scene
(Single
NRTtunnel
RAB
3: Subway/
on
DL
HSScene
DSCH/UL DCH)
4: Single NRT
RAB
on DL HS0..2147483647
DSCH/UL E-DCH
(Single NRT RAB
5: All Multi-NRT
RAB on DL
DCH/UL DCH (All
Multi-NRT RAB on
DL
0: 0DCH/UL DCH)
6: 1
Multi-NRT RAB,
1:
0..2147483647
HSPA
2:
2 is Involved
and
3:
3 only DCHs are
Used
4:
4 in UL (MultiNRT
5:
0: 5
0 RAB, HSPA
is
Involved
and
6: 1
6
1:
only
DCHs
are
7:
7
2: 2
Used
in
UL)
8:
8
3: 3
7:
Multi-NRT
RAB,
9:
4: 9
4
HSPA
is
Involved
10:
11
5: 5
and
E-DCH is
11:
6: 613
Used
12:
15
7: 7 in UL (MultiNRT
13:
8: 817RAB, HSPA
is
and E14:
9: Involved
919
DCH
is
Used
in
10: 11
UL)
11: 13
8:
Multi
12:
15 Rab
1..4
Including
13: 17 CS and
PS
Rab
14: (Multi
19
Including CS and
PS)
0: 3a
1: 3b
2: 3c
3: 3d
N/A
ms
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

absolute threshold of the UTRAN
cell quality that UE uses to judge
event 3a. The range and unit of
the parameter relate to the
measurement
UTRAN
This parameterquantity
is usedof
when
system.
judging
the quality
of the UTRAN
This
parameter
indicates
theis the
MAX_RAT_MEAS_EVENT
system
inthreshold
inter-RATused when
absolute
maximum
number
of inter-RAT
measurement,
which
indicates
judging
the quality
of other
RAT
This
parameter
indicates
measurement
events
which
the
weight
of
the
best
cellthe
in the
configured
for
event
3a/3b/3c.
hysteresis
used of
when
takes
the
value
4. judging
quality
judgment
(only
for of
event
The
value
range
and
unit
this
whether
to
trigger
the
event.
This
3a).
parameter makes
are related
to the
parameter
it
different
MAX_RAT_MEAS_EVENT
is the
measurement
quantity
of other
between
the
status
tointer-RAT
trigger
an
maximum
number
of
system,
at
present
the
event
and
the
status
to
leave
the
measurement
events
which
measurement
quantity
can
only
event,
so
as
to
avoid
the
trigger
takes
theCarrier
value of
4. of the
be
GSM
RSSI
status
change due
to verythe
small
This
parameter
indicates
GSM
system, which corresponds
change.
time
difference
between
having
to thelarger
CPICH
RSCP
of UTRAN
This
parameter
indicates
the
The
theevent
value
is,
the
larger
detected
the
generation
system,
so
thethat
value
range
and
filtering
factor
UE
performs
the
difference
between
the
and
reporting
the event.
Only
unit
of
this
parameter
correspond
the
L3the
filtering
on
the
status
to
trigger
the
event and
when
event
generation
is
to
the
CPICH
RSCP.
measurement
results
ofevent
the
intrathe
status
to
leave
the
will
detected
and
still
meets
all
MAX_RAT_MEAS_EVENT
is the
frequency
measurement.
be.
requirements
of event
triggering
maximum
number
of inter-RAT
UE
intra-frequency
Thisexecutes
parameter
is related
to the
after
Time
to
trigger,
the
event
measurement on
events
which
measurement
L1 in
the fixed
quantity
and
the
can
be
triggered
and
reported.
takes
the
value of
4.
cycle
(measure
several
points
in
event
type.
The
larger theinter-RAT
value is, the
UE
executes
one
measurement
cycle
and
L1
Different
events
are
configured
stricter
the judgment
is the
for the
measurement
on
L1be
in
fixed
filters
the
measurement
results.
separately
and
can
event
to
be
triggered.
The
cycle
(measure
several
points
This
method
can
be
decided
byin
configured
with different
parameter
should
be
set and L1
one
measurement
cycle
UE
freely).
Then
L1
reports
to
L3
hysteresis to the actual
according
filters
the measurement
results.
at
intervals
and
L3
filters
the
MAX_RAT_MEAS_EVENT
is
the
requirements.
Sometimes,
if itbyis
parameter
indicates
Object
This
method
can
be
decided
latest
measurement
and
maximum
number
ofresults
inter-RAT
set
too
large,
the
quality
of
calls
ID
offreely).
Inter-rat
event
UE
Then
L1
reports
to L3
the
measurement
results
saved
measurement
events
which
may
decrease.
measurement
configuration
at
intervals
and
L3
filters
the
previously.
The filtering
be
takes
the value
of 4. shallisfor
MAX_RAT_MEAS_EVENT
the
CPICHmeasurement
RSCP
(GSM).
latest
results
and
performed
according
to
the
maximum
number
of
inter-RAT
the
measurement
results saved
following
formula
described
in
measurement
which
previously.
Theevents
filtering
shall
be
3GPP
TS
25.331:
"RRC
Protocol
takes
the value
of 4. to the
performed
according
Specification"
in
1+a*Mn , formula
a = 1/2^described
(k/2) .
3GPP
TS
25.331:
"RRC
Protocol
Specification"
Fn = (1-a)*Fn-1
measurement :result
+a*Mn
a =previous
1/2^ (k/2)filtered
.
Fn-1 is ,the
Fn
is the updated
filtered
measurement
result
measurement
received
Fn-1
is the previous
measurement
result filtered
This
parameter
indicates
how of
measurement
result
a = 1/2^
(k/2), where
the value
many
events
are
required
Mn
the
latest
received to be
k is is
the
Filter
Coefficient.
configured
for
the
of the
measurement
result
NOTE: if k is set
toset
0 that
will
measurement
parameters
for aof
a
=
1/2^
(k/2),
where
the
certain
purpose.
The
defined
kThis
is the
Filter
Coefficient.
formula
indicates
thatthe
the
This
parameter
event
number
isindicates
related
towill
the
NOTE:
ifthe
k isvalue
set
to
0the
that
smaller
of
filtering
event
triggered
theinter-RAT
inter-RAT
judgment
method
of
mean
no the
layer
3by
filtering.
factor
is,
larger
effect
the to
measurement,
which
is
related
handover.
This
formula
indicates result
that
the
current
measurement
will
the
measurement
quantity.
smaller
the
value
of
the
filtering
have
on
the
measurement
result
MAX_RAT_MEAS_EVENT
factor
is, to
the
larger
effect
the
reported
(periodical
absolute
threshold
of
thenumber
UTRAN
indicates
theRNC
maximum
current
measurement
result
will
report)
or the
judgment
cell
quality
that
UE uses(event
to event,
judge
of
inter-RAT
measurement
have
on
the
measurement
result
report).
event
3a.
The range and unit of
which
is 4.
reported
to RNC
(periodical
the parameter
relate
to the
report)
or
the
judgment
(event
measurement
quantity
UTRAN
This
parameter is usedof
when
report).
system.
judging the quality of the UTRAN
MAX_RAT_MEAS_EVENT
is the
system
in inter-RAT
maximum
number
of inter-RAT
measurement,
which
indicates
measurement
events
the weight of the
best which
cell in the
takes
the
value
of
4. for event
quality judgment (only
3a).
MAX_RAT_MEAS_EVENT is the
maximum number of inter-RAT
measurement events which
takes the value of 4.
UTRAN Cell
and Service
Related
Handover Control
-24..0, step 1
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
0,
step
2: 0.5..7.5,
20
0.5
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5:
0: 5
0
6: 1
6
1:
7:
2: 7
2
8:
3: 8
3
9:
4: 9
4
10:
5: 511
11:
6: 613
12:
7: 715
13:
8: 817
14:
9: 919
10: 11
11: 13
12:
1..415
13: 17
14: 19
dB
ms
N/A
N/A
N/A
N/A
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
judging
the quality
of otherthe
RAT
This parameter
indicates
configured
for
event
3a/3b/3c.
hysteresis used when judging
The
value
of this
whether
torange
triggerand
the unit
event.
This
parameter
are
related
to
the
parameter makes it different
measurement
quantity
of other
between the status
to trigger
an
system,
at
present
the
event and the status to leave the
measurement
can
only
event, so as toquantity
avoid the
trigger
be
GSM
Carrier
RSSI
of
the
status
change due
to verythe
small
This
parameter
indicates
GSM
system, which
corresponds
change.
time
difference
between
having
to thelarger
CPICH
RSCP
of UTRAN
This
parameter
indicates
the
The
theevent
value
is,
the
larger
detected
the
generation
system,
so
thethat
value
range
and
filtering
factor
UE
performs
the
difference
between
the
and
reporting
the event.
Only
unit
of
this
parameter
correspond
the
L3the
filtering
on
the
status
to
trigger
the
event and
when
event
generation
is
to
the
CPICH
RSCP.
measurement
results
ofevent
the
intrathe
status
to
leave
the
will
detected
and
still
meets
all
MAX_RAT_MEAS_EVENT
is the
frequency
measurement.
be.
requirements
of event
triggering
maximum
number
of inter-RAT
UE
intra-frequency
Thisexecutes
parameter
is related
to the
after
Time
to
trigger,
the
event
measurement on
events
which
measurement
L1 in
the fixed
quantity
and
the
can
be
triggered
and
reported.
takes
the
value of
4.
cycle
(measure
several
points
in
event
type.
The
larger theinter-RAT
value is, the
UE
executes
one
measurement
cycle
and
L1
Different
events
are
configured
stricter
the judgment
is the
for the
measurement
on
L1be
in
fixed
filters
the
measurement
results.
separately
and
can
event
to
be
triggered.
The
cycle
(measure
several
points
This
method
can
be
decided
byin
configured
with different
parameter
should
be
set and L1
one
measurement
cycle
UE
freely).
Then
L1
reports
to
L3
according
filters
the measurement
results.
at
intervals
and
L3
filters
the
MAX_RAT_MEAS_EVENT
is
the
requirements.
Sometimes,
if itbyis
parameter
indicates
Object
This
method
can
be
decided
latest
measurement
and
maximum
number
ofresults
inter-RAT
set
too
large,
the
quality
of
calls
ID
offreely).
Inter-rat
event
UE
Then
L1
reports
to L3
the
measurement
results
saved
measurement
events
which
may
decrease.
measurement
configuration
at
intervals
and
L3
filters
the
previously.
The filtering
be
takes
the value
of 4. shallisfor
MAX_RAT_MEAS_EVENT
the
CPICHmeasurement
Ec/No
(EUTRAN).
latest
results
and
performed
according
to
the
maximum
number
of
inter-RAT
the
measurement
results saved
following
formula
described
in
measurement
which
previously.
Theevents
filtering
shall
be
3GPP
TS
25.331:
"RRC
Protocol
takes
the value
of 4. to the
performed
according
Specification"
in
1+a*Mn , formula
a = 1/2^described
(k/2) .
3GPP
TS
25.331:
"RRC
Protocol
Specification"
Fn = (1-a)*Fn-1
measurement :result
+a*Mn
a =previous
1/2^ (k/2)filtered
.
Fn-1 is ,the
Fn
is the updated
filtered
measurement
result
measurement
received
Fn-1
is the previous
measurement
result filtered
This
parameter
indicates
how of
measurement
result
a = 1/2^
(k/2), where
the value
many
events
are
required
Mn
the
latest
received to be
k is is
the
Filter
Coefficient.
configured
for
the
of the
measurement
result
NOTE: if k is set
toset
0 that
will
measurement
parameters
for aof
a
=
1/2^
(k/2),
where
the
certain
purpose.
The
defined
kThis
is the
Filter
Coefficient.
formula
indicates
thatthe
the
This
parameter
event
number
isindicates
related
towill
the
NOTE:
ifthe
k isvalue
set
to
0the
that
smaller
of
filtering
event
triggered
theinter-RAT
inter-RAT
judgment
method
of
mean
no the
layer
3by
filtering.
factor
is,
larger
effect
the to
measurement,
which
is
related
handover.
This
formula
indicates result
that
the
current
measurement
will
the
measurement
quantity.
smaller
the
value
of
the
filtering
have
on
the
measurement
result
MAX_RAT_MEAS_EVENT
factor
is, to
the
larger
effect
the
reported
(periodical
absolute
threshold
of
thenumber
UTRAN
indicates
theRNC
maximum
current
measurement
result
will
report)
or the
judgment
cell
quality
that
UE uses(event
to event,
judge
of
inter-RAT
measurement
have
on
the
measurement
result
report).
event
3a.
which
is 4.
reported
to RNC
(periodical
the parameter
relate
to the
report)
or
the
judgment
(event
measurement
quantity
UTRAN
This
parameter is usedof
when
report).
system.
judging
the quality
of the UTRAN
This
parameter
indicates
theis the
MAX_RAT_MEAS_EVENT
system
inthreshold
inter-RATused when
absolute
maximum
number
of inter-RAT
measurement,
which
indicates
judging
the quality
of other
RAT
This
parameter
indicates
measurement
events
which
the
weight
of
the
best
cellthe
in the
configured
for
event
3a/3b/3c.
hysteresis
used of
when
takes
the
value
4. judging
quality
judgment
(only
for of
event
The
value
range
and
unit
this
whether
to
trigger
the
event.
This
3a).
parameter makes
are related
to the
parameter
it
different
MAX_RAT_MEAS_EVENT
is the
measurement
quantity
of other
between
the
status
tointer-RAT
trigger
an
maximum
number
of
system,
at
present
the
event
and
the
status
to
leave
the
measurement
events
which
measurement
quantity
can
only
event,
so
as
to
avoid
the
trigger
takes
theCarrier
value of
4. of the
be
GSM
RSSI
status
change due
to very small
GSM
change.
to thelarger
CPICH
of UTRAN
The
theRSCP
value is,
the larger
system,
so thebetween
value range
the difference
the and
unit
of to
this
parameter
correspond
status
trigger
the event
and
to
the
CPICH
RSCP.
the status to leave the event will
MAX_RAT_MEAS_EVENT
is the
be.
maximum
number
of
inter-RAT
This parameter is related to the
measurement quantity
events which
measurement
and the
takes
value of 4.
event the
type.
Different events are configured
separately and can be
configured with different
hysteresis
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
0: 0
1: 10
0,
step
2: 0.5..7.5,
20
0.5
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5:
0: 5
0
6: 1
6
1:
7:
2: 7
2
8:
3: 8
3
9:
4: 9
4
10:
5: 511
11:
6: 613
12:
7: 715
13:
8: 817
14:
9: 919
10: 11
11: 13
12:
1..415
13: 17
14: 19
dBm
dB
ms
N/A
N/A
N/A
N/A
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
UTRAN Cell
and Service
Related
Handover Control
-24..0, step 1
dB
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
-140..-44, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0, 0.5..7.5, step
0.5
dB
UTRAN Cell
and Service
Related

the
L3the
filtering
the
when
eventon
generation
is
measurement
results
of the
detected and still meets
all intrafrequency
measurement.
requirements
of event triggering
UE
intra-frequency
afterexecutes
Time to trigger,
the event
measurement
onand
L1 in
the fixed
can be triggered
reported.
cycle
(measure
several
points in
The
larger theinter-RAT
value is, the
UE
executes
one
measurement
cycle
and
L1
stricter
the judgment
is the
for
the
measurement
on L1 in
fixed
filters
the
measurement
results.
event
to be triggered.
The
cyclemethod
(measure
pointsbyin
This
canseveral
be
decided
parameter
should
be
set
onefreely).
measurement
cycle
andtoL1
UE
Then
L1
reports
L3
according
to the actual results.
filters
the measurement
at
intervals
and
L3
filters
the
requirements.
Sometimes,
if itbyis
parameter
indicates
Object
This
method
can
be results
decided
latest
measurement
and
set
too
large,
the
quality
of
calls
ID
offreely).
Inter-rat
event
UE
Then
L1
reports
to L3
the
measurement
results
saved
may
decrease.
measurement
configuration
at
intervals
and
L3
filters
the
previously.
The filtering shallisfor
be
MAX_RAT_MEAS_EVENT
the
CPICHmeasurement
RSCP
(EUTRAN).
latest
results
and
performed
according
to
the
maximum
number
of
inter-RAT
the
measurement
results saved
following
formula
described
in
measurement
which
previously.
Theevents
filtering
shall
be
3GPP
TS
25.331:
"RRC
Protocol
takes
the value
of 4. to the
performed
according
Specification"
in
1+a*Mn , formula
a = 1/2^described
(k/2) .
3GPP
TS
25.331:
"RRC
Protocol
Specification"
Fn = (1-a)*Fn-1
measurement :result
+a*Mn
a =previous
1/2^ (k/2)filtered
.
Fn-1 is ,the
Fn
is the updated
filtered
measurement
result
measurement
received
Fn-1
is the previous
measurement
result filtered
This
parameter
indicates
how of
measurement
result
a = 1/2^
(k/2), where
the value
many
events
are
required
Mn
the
latest
received to be
k is is
the
Filter
Coefficient.
configured
for
the
of the
measurement
result
NOTE: if k is set
toset
0 that
will
measurement
parameters
for aof
a
=
1/2^
(k/2),
where
the
certain
purpose.
The
defined
kThis
is the
Filter
Coefficient.
formula
indicates
thatthe
the
This
parameter
event
number
isindicates
related
towill
the
NOTE:
ifthe
k isvalue
set
to
0the
that
smaller
of
filtering
event
triggered
theinter-RAT
inter-RAT
judgment
method
of
mean
no the
layer
3by
filtering.
factor
is,
larger
effect
the to
measurement,
which
is
related
handover.
This
formula
indicates result
that
the
current
measurement
will
the
measurement
quantity.
smaller
the
value
of
the
filtering
have
on
the
measurement
result
MAX_RAT_MEAS_EVENT
factor
is, to
the
larger
effect
the
reported
(periodical
absolute
threshold
of
thenumber
UTRAN
indicates
theRNC
maximum
current
measurement
result
will
report)
or the
judgment
cell
quality
that
UE uses(event
to event,
judge
of
inter-RAT
measurement
have
on
the
measurement
result
report).
event
3a.
which
is 4.
reported
to RNC
(periodical
the parameter
relate
to the
report)
or
the
judgment
(event
measurement
quantity
UTRAN
This
parameter is usedof
when
report).
system.
judging
the quality
of the UTRAN
This
parameter
indicates
theis the
MAX_RAT_MEAS_EVENT
system
inthreshold
inter-RATused when
absolute
maximum
number
of inter-RAT
measurement,
which
indicates
judging
the quality
of other
RAT
This
parameter
indicates
measurement
events
which
the
weight
of
the
best
cellthe
in the
configured
for
event
3a/3b/3c.
hysteresis
used of
when
takes
the
value
4. judging
quality
judgment
(only
for of
event
The
value
range
and
unit
this
whether
to
trigger
the
event.
This
3a).
parameter makes
are related
to the
parameter
it
different
MAX_RAT_MEAS_EVENT
is the
measurement
quantity
of other
between
the
status
tointer-RAT
trigger
an
maximum
number
of
system,
at
present
the
event
and
the
status
to
leave
the
measurement
events
which
measurement
quantity
can
only
event,
so
as
to
avoid
the
trigger
takes
theCarrier
value of
4. of the
be
GSM
RSSI
status
change due
to verythe
small
This
parameter
indicates
GSM
change.
time
difference
between
having
to thelarger
CPICH
RSCP
of UTRAN
The
theevent
valuegeneration
is,
the larger
detected
the
system,
so
thebetween
value range
and
the
difference
the
and
reporting
the event.
Only
unit
of
this
parameter
correspond
status
to trigger
the event and
when
the
event
generation
is
to
the
CPICH
RSCP.
the
status
to
leave
the event
will
detected
and
still
meets
all
MAX_RAT_MEAS_EVENT
is the
be.
requirements
of event
triggering
maximum
number
of inter-RAT
This parameter
is related
to the
after
Time
to
trigger,
the
event
measurement quantity
events which
measurement
and the
can
be
triggered
and
reported.
takes
the
value of 4.
event
type.
The larger
the value is, the
Different
events
are configured
stricter the
judgment
is for the
separately
and
can
beThe
event to be triggered.
configured
with different
parameter should
be set
according
MAX_RAT_MEAS_EVENT
requirements.
Sometimes,
ifisitthe
is
This
parameter
indicates
Object
maximum
number
of
inter-RAT
set
too
large,
the
quality
of
calls
ID
of Inter-rat event
measurement
which
may
decrease.events
measurement
configuration
takes
the
value
of
4.
MAX_RAT_MEAS_EVENT
unrelated to traffic category.is the
maximum number of inter-RAT
measurement events which
takes the value of 4.
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11:
0: 0320
12:1640
1:
0..2147483647
13:21280
2:
14:32560
3:
15:45000
4:
5:
0: 5
0
6: 1
6
1:
7:
2: 7
2
8:
3: 8
3
9:
4: 9
4
10:
5: 511
11:
6: 613
12:715
7:
13:
8: 817
14:
9: 919
10: 11
11: 13
12:
1..415
13: 17
14: 19
ms
N/A
N/A
N/A
N/A
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
UTRAN Cell
and Service
Related
Handover Control
-115..-25, step 1
dBm
UTRAN Cell
and Service
Related
Handover Control
0.0..2.0, step 0.1
N/A
UTRAN Cell
and Service
Related
Handover Control
-140..-44, step 1
dBm
UTRAN Cell
and Service
Related
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
0: 0
1: 10
0,
step
2: 0.5..7.5,
20
0.5
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
0..2147483647
13: 1280
14: 2560
15: 5000
dB
ms
N/A
cycle (measure several points in

UE
inter-RAT
oneexecutes
measurement
cycle and L1
measurement
on L1 in the
fixed
filters the measurement
results.
cycle
(measure
several
points
This method can be decided byin
one
measurement
andtoL1
UE freely).
Then L1cycle
reports
L3
filters
the measurement
at intervals
and L3 filtersresults.
the
parameter
indicates
Object
This
method
can
be results
decided
by
latest
measurement
and
UE
executes
inter-RAT
ID
of
Inter-rat
period
UE
freely).
Then
L1
reports
to
L3
the measurement
results
measurement
on L1
in thesaved
fixed
measurement
configuration
for
at
intervals
and
L3
filters
the
previously.
The filtering
cycle
(measure
several shall
pointsbein
CPICH
EcNo.
latest
measurement
results
performed
according
to the
one measurement
cycle
andand
L1
the
measurement
results
saved
following
formula
described
in
previously.
The
shall
be
3GPPmethod
TS 25.331:
"RRC
Protocol
This
canfiltering
be
decided
by
performed
to the to L3
Specification"
: Fn=
UE
freely). according
Then
L1 (1-a)*Fnreports
following
1+a*Mn
, formula
a and
= 1/2^
(k/2)
at
intervals
L3described
filters. thein
3GPP
TS
25.331:
"RRC
Protocol
Fn is the
updated filtered
latest
measurement
results
and
Specification"
:
Fn
=
(1-a)*Fn-1
measurement
result
+a*Mn
a =The
1/2^filtering
(k/2)filtered
. shall be
Fn-1
is ,the
previous
previously.
Fn
is the updated
filtered
measurement
result
performed
according
to the
measurement
Mn is the formula
latestresult
received
following
described in
Fn-1
is
the
previous
filtered
measurement
result
3GPP
TS 25.331:
"RRC
Protocol
measurement
result
a = 1/2^ (k/2), :where
the value of
Specification"
Fn = (1-a)*Fn-1
Mn
the
received
k+a*Mn
is is
the
Coefficient.
,Filter
a latest
= 1/2^
(k/2) .
measurement
result
NOTE:
if
k
is
set
0 that will
Fn is the updatedtofiltered
a
= 1/2^
the value of
mean
no(k/2),
layerwhere
3 filtering.
measurement
result
kFn-1
is the
Filter
Coefficient.
This
formula
indicates
that the
is the
previous
filtered
NOTE:
ifthe
k isvalue
set
to
0the
that
will
This
parameter
indicates
the
smaller
of
filtering
measurement
result
This
parameter
indicates
the
mean
no
layer
3
filtering.
filtering
factor
that
UE
performs
factor
is,the
the
larger
effect
the to
Mn
is the
latest
received
times
of
periodical
reports
This
formula
indicates
that the
the
L3
filtering
on the result
current
measurement
will
measurement
result
be
reported.
If results
theofUE
detects
smaller
the
value
the
filtering
measurement
of
the
intrahave
on
the
measurement
result
a
=
1/2^
(k/2),
where
the
value
of
that
the
times
of event
reports
factor
is,Filter
the
larger
effect
the
frequency
measurement.
to
RNC
(periodical
kreported
is
the
Coefficient.
exceeds
the value
of Amount
of
current
result
UE
executes
intra-frequency
report)
or
judgment
(event
NOTE:
ifmeasurement
kthe
is set
to 0reporting
that
willwill
reporting,
UE
stops
the
have
on
measurement
measurement
on
L1 in the result
fixed
report).
mean
nothe
layer
3 filtering.
measurement
results.
reported
to
RNC
(periodical
cycle
(measure
several
points
formula indicates
thatthe
the in
This
parameter
indicates
UE
executes
inter-RAT
report)
or
the
judgment
(event
one
measurement
cycle
and
L1
smaller of
theperiodical
value of the
filtering
interval
measurement
on L1 reporting
in the
fixed
report).
filters
the
measurement
results.
factor
is,
the
larger
effect
the
when
such reporting
is triggered
cycle
(measure
pointsbyin
This
method
canseveral
be decided
current
measurement
result will
periodically.
one
measurement
cycle
andtoL1
UE
freely).
Then
L1
reports
L3
have on the measurement result
filters
the measurement
results.
at
intervals
and
L3
filters
the
reported
to RNCindicates
(periodical
parameter
Object
This
method
can
be results
decided
by
latest
measurement
and
UE
executes
inter-RAT
report)
or
the
judgment
(event
ID
of
Inter-rat
period
UE
freely).
Then
L1
reports
to
L3
the
measurement
results
measurement
on L1
in thesaved
fixed
report).
measurement
configuration
for
at
intervals
and
L3
filters
the
previously.
The filtering
cycle
(measure
several shall
pointsbein
CPICH
RSCP.
latest
measurement
results
performed
according
to the
one measurement
cycle
andand
L1
the
measurement
results
saved
following
formula
described
in
previously.
The
shall
be
3GPPmethod
TS 25.331:
"RRC
Protocol
This
canfiltering
be
decided
by
performed
to the to L3
Specification"
: Fn=
UE
freely). according
Then
L1 (1-a)*Fnreports
following
1+a*Mn
, formula
a and
= 1/2^
(k/2)
at
intervals
L3described
filters. thein
3GPP
TS
25.331:
"RRC
Protocol
Fn is the
updated filtered
latest
measurement
results
and
Specification"
:
Fn
=
(1-a)*Fn-1
measurement
result
+a*Mn
a =The
1/2^filtering
(k/2)filtered
. shall be
Fn-1
is ,the
previous
previously.
Fn
is the updated
filtered
measurement
result
performed
according
to the
measurement
Mn is the formula
latestresult
received
following
described in
Fn-1
is
the
previous
filtered
measurement
result
3GPP
TS 25.331:
"RRC
Protocol
measurement
result
a = 1/2^ (k/2), :where
the value of
Specification"
Fn = (1-a)*Fn-1
Mn
the
received
k+a*Mn
is is
the
Coefficient.
,Filter
a latest
= 1/2^
(k/2) .
measurement
result
NOTE:
if
k
is
set
0 that will
Fn is the updatedtofiltered
a
= 1/2^
the value of
mean
no(k/2),
layerwhere
3 filtering.
measurement
result
kFn-1
is
the
Filter
Coefficient.
This formula
indicates
that the
is the previous
filtered
NOTE:
ifthe
k isvalue
set
to
0the
that
will
smaller
of
filtering
measurement
result
This
parameter
indicates
the
mean
no
layer
3
filtering.
factor
is,the
the
larger
effect
the to
Mn
is the
latest
received
times
of
periodical
reports
This
formula
indicates
that the
current
measurement
result
will
measurement
result
be
reported.
If
the
UE
detects
smaller
the
value
of the
filtering
have
on
the
measurement
result
a
=
1/2^
(k/2),
where
the
value
of
that
the
times
of event
reports
factor
is,Filter
theRNC
larger
effect
the
to
(periodical
kreported
is
the
Coefficient.
exceeds
the value of Amount
of
current
result
report)
or
judgment
(event
NOTE:
ifmeasurement
kthe
is set
to 0reporting
that
willwill
reporting,
UE
stops
the
have
on
measurement
report).
mean
nothe
layer
3 filtering. result
measurement
results.
reported
to
RNC
(periodical
formula indicates
thatthe
the
This parameter
indicates
report)
or
the
judgment
(event
smaller of
theperiodical
value of the
filtering
interval
reporting
report).
factor
is, thereporting
larger effect
the
when such
is triggered
current
measurement
result
will
periodically.
have on the measurement result
reported to RNC (periodical
report) or the judgment (event
report).
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
RNC
Parameter
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
0..2147483647
2: 2
3: 3
4: 4
5:
0: 5
0
6: 1
6
1:
7:
2: 7
2
8:
3: 8
3
9:
4: 9
4
10:
11
5:
5
0:
013
11:
6: 1
6
1:
12:715
7:
2:
217
13:
8:
8
3:
319
14:
9:
4: 9
4
10:
5: 511
11:
6: 613
12:715
7:
13:
8: 817
14:
0:
9: 1
919
1:
10:211
1:
2:
413
11:250
2:
3:
815
12:500
3:
4:
16
13:1000
17
4:
5:
32
14:2000
19
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
0:
12:024000
1:
128000
13:
0..2147483647
2:
14:232000
3:
15:364000
4: 4
5:
0: 5
0
6: 1
6
1:
7:
2: 7
2
8:
3: 8
3
9:
4: 9
4
10:
11
5:
5
0:
013
11:
6: 1
6
1:
12:
15
7:
7
2:
217
13:
8:
8
3:
319
14:
9:
4: 9
4
10:
5: 511
11:
6: 613
12:
7: 715
13:
8: 817
14:
0:
9: 1
919
1:
10:211
1:
2:
413
11:250
2:
3:
815
12:500
3:
4:
16
13:1000
17
4:
5:
32
14:2000
19
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
12: 24000
13: 28000
14: 32000
15: 64000
N/A
N/A
N/A
N/A
N/A
ms
N/A
N/A
N/A
N/A
N/A
ms

Profile Object ID
RNC
Parameter
Profile Id
RNC
Parameter
this parameter indicates the

Initial Load Scene
RNC
Parameter

RNC
Parameter
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management

measurement filter coefficient,
which determines the amount of UTRAN Cell
filtering to be applied for
measurements.
NodeB
Management

usage, function etc. of the
configuration parameters
indicated by the Node B
common measurement
configuration index.
This parameter indicates on
which type of object that the
measurement shall be
performed, which can be cell or
RACH.
type of measurement that shall
be performed by Node B.

report characteristics of how the
reporting shall be performed by
Nodeparameter
B.
This
indicates the
choice report periodicity scale,
which and the report period
together determine the frequency
with which the Node B shall send
measurement
These
This
parameterreports.
indicates
the two
parameters
only
applies
report period,
which
and for
the
periodic
reportperiodicity
and eventscale
E/F.
choice report
together
determine the
frequency
The TUTRAN-GPS
change
limit
with
which
the
Node
B
shall
send
and the predicted TUTRAN-GPS
measurement
reports. These
deviation
limit together
define two
the
parameters
only applies
for
related thresholds
for UTRAN
periodic
report
andframes
event E/F.
GPS timing
of cell
for UE
positioning measurements which
shall trigger the event on
modification. The TUTRAN-GPS
change limit indicates change of
TUTRAN-GPS value compared
to previously reported value,
which shall trigger a new report.
0..2147483647
N/A
0:
Period Report
0..9
Parameters for
RTWP
1: Period Report
Parameters
for
0: Normal Load
TCP
Cell
2:
NodeB
1: Period
High Load
Cell
Common
Measurement
Report
Parameters for
0..2147483647
TUTRAN-GPS
3: On Modification
NodeB Common
Measurement
Report Parameter
for TUTRAN-GPS
4: Received
Period Report
0:
Total
Parameters
for
Wide
Band Power
HS-DSCH
1:
Transmitted
Required
Power
Carrier
Power
5:
Period
6:
UTRANReport
GPS
1: Cell
Parameters
for
Timing of Cell
NotusedHSFrames
for UE
DSCH_TCP
Positioning
0:
0
6: Transmitted
Period NodeB
8:
1:
1
Common
Carrier
Power of
2:
Measurement
All2Codes not
3:
3 for HSReport
Used
4:
4
Parameters
for
PDSCH
or HS5:
5
Received
SCCH
6:
6
Scheduled
E-DCH
Transmission
7:
7
Power
Share
9:
HS-DSCH
8:
8
Required
Power
9:
20:9Received
10:
11
Scheduled
E-DCH
11:
13 Share
Power
2:
12:Periodic
15
9:
13:On
17Modification
14: 19
N/A
N/A
N/A
N/A
N/A
N/A
N/A
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
1: ms
2: min
N/A
UTRAN Cell
NodeB
Management
{rptPrdUnit==1}
[10..60000], step
10
{rptPrdUnit==2}
[1..60], step 1
ms or min
UTRAN Cell
Location
0.0625..16, step
0.0625
chips
N/A
The TUTRAN-GPS change limit

and the predicted TUTRAN-GPS
deviation limit together define the
related thresholds for UTRAN
GPS timing of cell frames for UE
positioning measurements which
shall trigger the event on
UTRAN Cell
modification. The predicted
TUTRAN-GPS deviation limit
indicates deviation of the
This
parameter
indicates the
predicated
TUTRAN-GPS
from
accuracy
class
of
the UTRAN
the latest measurement
result,
UTRAN Cell
GPS
of cell frames
for UE
whichtiming
shall trigger
a new report.
positioning measurement
This parameter indicates the Id
of the dedicated measurement
Profile.
RNC

NodeB Dedicated Measurement RNC
Profile Object ID.

NodeB Dedicated Measurement RNC
Configuration Object ID.
This
This parameter
parameter indicates
indicates how
the
filtering
of
the
measurement
function, purpose etc. of the
values
shall
be performed before
dedicated
measurement
measurement
event evaluation
parameters indicated
by the
and
reporting.
configuration index.
The averaging shall be
This parameter
indicates the
following
formula.
type of dedicated measurement
to
bevariables
executedinby
Node
B are
The
the
formula
defined as follows:
measurement result
Fn-1 is the old filtered
measurement result
measurement
from the
This parameterresult
indicates
physical
layer
measurements
report characteristics of
a
= 1/2 (k/2) , where
is the can
measurement
results,k which
Measurement
Filter
Coefficient.
be on demand, periodic or by If
k=1
there'sallno
filtering)
triggering
kinds
of: events.
In order to initialise the averaging
filter, parameter
F0 is set toindicates
M1 whenthe
the
This
first measurement
result
from the
threshold
1 used for
triggering
This
indicates
physical
measurement
eventparameter
E, layer
F for SIR
Error the is
power
offset
of
the
DPCH
received.
measurement.
maximum
DL
power,
which
the
defines
which
threshold
that shall
downlink rate level threshold,
In
trigger
B for
transmitted
D-TCP event
basedA,PS
DRBC,
the
carrier
power
measurement.
thresholds
of D-TCP
In
PS DRBC, this
threshold
measurement
event
A/B areisgot
related
to the
the rate
service
rate
as
based on
level
of the
following:
service.
Rate Level PS Service Rate (R)
Threshold of Event A/B
Level 1 R<= DlRateLevel[0]
EvtAbTcpThrd [0]
Level 2 DlRateLevel[0]<R<=
DlRateLevel[1] EvtAbTcpThrd [1]
Level 3 R>DlRateLevel[1]
EvtAbTcpThrd [2]
Other case, the threshold and
service rate independent, and
RNC
RNC
RNC
RNC
RNC
Location
0.0625..16, step
0.0625
0: Accuracy Class
A
1: Accuracy Class
Location
0:
B Period Report
Parameters
for
2: Accuracy Class
TCP
in Power
C
Balance
1: Period Report
Basic Identification Parameters for
0..2147483647
Parameter
TCP in AMR or
DASF-PS or
Handover Control
2: Event A Report
Basic Identification Parameters 1 for
0..9
Parameter
TCP in DASF-PS
3: Event B Report
Parameters 1 for
TCP in DASF-PS
Basic Identification 4: Period Report
0..2147483647
Parameters for
Parameter
RTT in LCS
5: Event E Report
Parameters for
SIR Error in Outer
Power Control,
Loop Power
Location
Control
6: Event F Report
Power Control, AMR Parameters
1:
SIR
Error for
0:
0 Error
SIR
in Outer
& WB-AMR,
2: Transmitted
1:
1 Power
Loop
Dynamic Radio
Code
Power
2:
2
Control
Bearer Control,
5:
Round
Trip
3:
3
7:
Event A Report
Handover Control
Time
4: 4
Power Control, AMR Parameters for
5:
5 in AMR
TCP
& WB-AMR,
6:
8: 6
Event B Report
Dynamic Radio
7:
7
Parameters
for
Bearer Control,
8:
8 in AMR
TCP
Handover Control, 1: On Demand
9:
9
9:
Event
A Report
Location
2:
Periodic
10:
11
AMR & WB-AMR,
Parameters
3:
Event
A for
11:
13in Handover
Dynamic Radio
TCP
4:
Event
12:
15 B
Bearer Control,
Control
5:
Event
C
13:
Handover Control, 10: 17
EventDB
6:
Event
14:
19
Location
Report
7: Event E
Parameters
8: Event F for
TCP in Handover
Control
Power Control
-31..31, step 0.5
chips
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
dB
RNC
Dynamic Radio
Bearer Control
1..65535, step 1
kbps
RNC
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
-50..0, step 0.1
dB
For
A/B/E/F,
this parameter
Thisevent
parameter
indicates
the
is
measurement
time
threshold
2 usedhysteresis
for triggering
RNC
and
the
measurement
hysteresis
event E, F for SIR Error
time
provides the duration during
measurement.
which a reporting criterion has to
be fulfilled for the Measurement
Reporting procedure to be
triggered.
RNC
For event C/D, this parameter is
change time. and the change
time is the time the
This
parameterentity
indicates
measurement
shall the
rise on
report
period
unit
applied
(in ms), in order to trigger by
a
RNC
Node
B for measurement
result
measurement
report.
reporting.
frequence of measurement
report transmitted by Node B.
RNC

Object ID
RNC
Power Control
-31..31, step 0.5
dB
AMR & WB-AMR,

Dynamic Radio
10..60000, step 10 ms
Bearer Control,
Handover Control
Power Control, AMR
& WB-AMR,
Dynamic Radio
1: ms
N/A
Bearer Control,
2: min
Handover Control,
Location
{rptPrdUnit==1}
[10..60000], step
Power Control,
10
ms
Location
{rptPrdUnit==2}
[1..60], step 1
Parameter
0..2147483647
N/A
The parameter is the eNodeB

EUtran
No. that EUtran cell belongs to. It
Neighboring
can be Macro eNodeB or Home
Cell
eNodeB.
Parameter
0..268435455
N/A
The parameter is the eNodeB

type that EUtran cell belongs to.
It can be Macro eNodeB or
Home eNodeB.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0: Macro eNodeB
1: Home eNodeB
N/A
The parameter is the RNC

identity that EUtran cell belongs
to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..4095
N/A
RNC
Parameter
0..999999999999
N/A
EUTRAN
Neighboring
Cell
Parameter
0..503
N/A
RNC
RAN SHARING
N/A
RNC
Parameter
0..999
N/A

Object ID.
The parameter is used to identify
a Eutran physical cell. There are
504 unique physical-layer cell
identities. The physical-layer cell
identities are grouped into 168
unique physical-layer cell-identity
groups, each group containing
three unique identities.
The number of PLMN shared by
CELL
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
MNC identifies a specific PLMN

inside one country (decided by
MCC).
RNC
Parameter

code length of the MNC BCD of
the neighboring EUtran cell.
EUtran
Neighboring
Cell
Parameter

EUTRAN
EUTRAN cell identity. It identifies
Neighboring
a neighboring EUTRAN cell
Cell
uniquely.
Parameter

frequency band of the Eutran
The
cells.parameter indicates the
downlink E-UTRA Absolute
Number (EARFCN). F_DL is
center carrier frequency,
F_DL_low is dl lowest carrier
frequency, N_DL is DlEARFCN,
N_Offs-Dl is carrier frequency
offset indicated by band
The
indicator.
uplink E-UTRA Absolute Radio
Frequency Channel Number.
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control

TAC of the neighboring EUtran
cell.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter

EUTRAN
maximum allowed measurement
Neighboring
bandwidth on a carrier
Cell
frequency.
Handover Control
The parameter is the LAC that

EUtran cell belongs to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
The parameter is the RAC that

EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter

downlink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control

uplink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control
d==1} [600..1199],
{eutranFreqBandIn
{eutranFreqBandIn
d==2}
d==0}
[1200..1949],
[18000..18599],
{eutranFreqBandIn
{eutranFreqBandIn
d==3}
d==1}
[1950..2399],
[18600..19199],
{eutranFreqBandIn
0..999
{eutranFreqBandIn
d==4}
d==2}
[2400..2649],
[19200..19949],
{eutranFreqBandIn
{eutranFreqBandIn
d==5}
d==3}
[2650..2749],
[19950..20399],
2,
3
0:
Band 1;
{eutranFreqBandIn
{eutranFreqBandIn
1:
Band 2;
d==6}
d==4}
2:
Band 3;
[2750..3449],
[20400..20649],
3:
Band 4;
{eutranFreqBandIn
{eutranFreqBandIn
4:
Band 5;
d==7}
d==5}
5:
Band 6
0..255
[3450..3799],
[20650..20749],
6: Band 7;
{eutranFreqBandIn
{eutranFreqBandIn
7:
Band 8;
d==8}
d==6}
8:
Band 9;
[3800..4149],
[20750..21449],
9:
Band 10;
{eutranFreqBandIn
{eutranFreqBandIn
10:
Band 11;
d==9}
d==7}
11:
Band
12;
[4150..4749],
[21450..21799],
12: Band 13;
{eutranFreqBandIn
{eutranFreqBandIn
13:
Band 14;
d==10}
d==8}
16:
Band 17;
[4750..4999],
[21800..22149],
17:
Band 18;
{eutranFreqBandIn
{eutranFreqBandIn
18:
Band 19;
d==11}
d==9}
19:
Band 20;
[5000..5179],
[22150..22749],
20: Band 21;
{eutranFreqBandIn
{eutranFreqBandIn
22:
Band 23;
d==12}
d==10}
23:
Band 24;
[5180..5279],
[22750..22999],
24:
Band 25;
{eutranFreqBandIn
{eutranFreqBandIn
d==13}
d==11}
[5280..5379],
[23000..23179],
{eutranFreqBandIn
{eutranFreqBandIn
d==16}
d==12}
[5730..5849],
0..65535
[23180..23279],
{eutranFreqBandIn
{eutranFreqBandIn
d==17}
d==13}
0:
6
[5850..5999],
[23280..23379],
1:
15
{eutranFreqBandIn
{eutranFreqBandIn
2:
25
d==18}
d==16}
3:
50
[6000..6149],
[23730..23849],
4:
75
{eutranFreqBandIn
{eutranFreqBandIn
5:
100
d==19}
d==17}
[6150..6449],
[23850..23999],
{eutranFreqBandIn
{eutranFreqBandIn
0..65533,
65535
d==20}
d==18}
[6450..6599],
[24000..24149],
{eutranFreqBandIn
{eutranFreqBandIn
d==22}
d==19}
[7500..7699],
[24150..24449],
{eutranFreqBandIn
0..255
{eutranFreqBandIn
d==23}
d==20}
[7700..8039],
[24450..24599],
{eutranFreqBandIn
{eutranFreqBandIn
d==24}
d==22}
[8040..8689]
[25500..25699],
1..100, step 1
{eutranFreqBandIn
d==23}
[25700..26039],
{eutranFreqBandIn
d==24}
1..100, step 1
[26040..26689]
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

Object ID.
The number of PLMN shared by
CELL
RNC
Parameter
0..999999999999
N/A
EUTRAN
Neighboring
Cell
Parameter
0..503
N/A
RNC
RAN SHARING
N/A

internationally.
RNC
Parameter
0..999
N/A

MCC).
RNC
Parameter
N/A

the neighboring EUtran cell.
EUtran
Neighboring
Cell
Parameter

EUTRAN
Neighboring
Cell
uniquely.
Parameter
0:
Band 1;
0..999
1: Band 2;
2: Band 3;
3: Band 4;
4: Band 5;
5:
Band 6
{eutranFreqBandIn
2, 3
6:
Band 7;
d==32}
7:
Band 8;
[36000..36199],
8:
Band 9;
{eutranFreqBandIn
9: Band 10;
d==33}
10:
Band 11;
[36200..36349],
0..255
11:
Band
12;
{eutranFreqBandIn
12:
Band
d==34} 13;
13:
Band 14;
[36350..36949],
16:
Band 17;
{eutranFreqBandIn
17: Band 18;
d==35}
18:
Band 19;
[36950..37549],
19:
Band 20;
{eutranFreqBandIn
20:
Band 21;
d==36}
22:
Band 23;
[37550..37749],
23:
Band 24;
{eutranFreqBandIn
24:
Band 25;
d==37}
32:
Band 33;
[37750..38249],
33:
Band 34;
{eutranFreqBandIn
34:
Band 35;
d==38}
35:
Band 36;
[38250..38649],
36: Band 37;
{eutranFreqBandIn
0..65535
37:
Band 38;
d==39}
38:
Band 39;
[38650..39649],
39:
{eutranFreqBandIn
0:
6Band 40;
40:
Band 41;
d==40}
1:
15
41:
Band 42;
[39650..41589],
2:
25
42:
Band 43;
{eutranFreqBandIn
3: 50
d==41}
4: 75
[41590..43589],
5:
100
{eutranFreqBandIn
d==42}
0..65533,
65535
[43590..45589]

frequency band of the Eutran
The
cells.parameter indicates the
downlink E-UTRA Absolute
Number (EARFCN). F_DL is
center carrier frequency,
F_DL_low is dl lowest carrier
frequency, N_DL is DlEARFCN,
N_Offs-Dl is carrier frequency
offset indicated by band
This
indicator.
TAC of the neighboring EUtran
cell.
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter

EUTRAN
maximum allowed measurement
Neighboring
bandwidth on a carrier
Cell
frequency.
The parameter is the LAC that

EUtran
Neighboring
Cell
Handover Control
Adjacent EUTRAN
cell Basic
Parameter
N/A
N/A
N/A
N/A
N/A
N/A
N/A
The parameter is the RAC that

EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..255
N/A

downlink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control
1..100, step 1

uplink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control
1..100, step 1
External RNC Function Object ID RNC
Parameter
0..2147483647
N/A

internationally.
RNC
Parameter
0..999
N/A

MCC).
RNC
Parameter
0..999
N/A
The parameter is the adjacent

RNC identity.
RNC
Parameter
0..4095
N/A

sharing MCC of the neighboring
RNC locates.
RNC and
PLMN
Inter_RNC
Adjencent cell Basic 0..999
Parameter
N/A

sharing MNC of the neighboring
RNC locates.
RNC and
PLMN
Inter_RNC
Parameter
N/A

reference to UIurLink object.
RNC
Parameter
N/A
This parameter defines the

neighboring cell diversity
combination indicator when the
current RNC is SRNC.
NE Office
0: May
Inter_RNC
1: Must
Adjencent cell Basic
2: Must not
Parameter
N/A

neighboring cell diversity
combination indicator when the
current RNC is DRNC.
NE Office
Inter_RNC
0: Combined
Adjencent cell Basic 1: Not Combined
Parameter
N/A
N/A

External UTRAN Cell Object ID.
RNC
Parameter
0..999999999999
N/A

neighboring cell identity, which is
RNC
valid only in the RNC where the
cell locates.
Inter_RNC
Parameter
N/A

internationally.
UTRAN Cell
Parameter
0..999
N/A

MCC).
RNC
RAN Sharing
0..999
N/A

RNC ID of the neighboring cell. External
RNC ID is distributed uniformly in UTRAN Cell
PLMN.
Cell
This Mode
LAC of the neighboring cell.
This parameter is to confirm the
location of the MS. The coverage
areas of each PLMN are divided
into
location
areas. routing
LAC
Thismany
parameter
indicates
identifies
different
location
area.
area code of the neighboring
LAC
belongs
to
LAI
(LAI
=
cell. It is only valid when MCC
+
MNC + LAC).
One location
supporting
PS services.
The
area
includes
many
cells. one
routing area code identifies
routing area in PLMN of GSMMAP type for packeting services.
RAC belongs to RAI (RAI =
PLMN-ID + LAC + RAC). RAC is
This
indicates
the
set byparameter
the operator
via RNC
HCS
O&M.priority level (0-7) for the
GSM cells. 7 is the highest
priority, 0 is the lowest priority.
This parameter is the maximum
This
parameter
indicatespower
the of
allowed
RACH transmit
minimum
required
received
the neighboring
cell.
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
When the measurement quantity
is CPICH RSCP, only the
measured received power level
of the cell is over Qrxlevminimum
can
cell be selected.
This
Thisthe
parameter
is the Qrxlevmin
parameter
is
the
Qrxlevminimum
increment in SIB11. If present,
broadcast
in SIB11.
the actual value
of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin
Inter_RNC
Parameter
N/A
External
UTRAN Cell
N/A
1: FDD Mode
N/A
RNC
Handover Control
1..65533, 65535
N/A
External
UTRAN Cell
Inter_RNC
Parameter
N/A
External
UTRAN Cell
Idle Mode and

Common Channel
0..7
Behavior /Handover
Control
N/A
RNC
Idle Mode and

Common Channel
Behavior
-50..33, Step 1
dBm
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-115..-25, step 2
dBm
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-4..-2, step 2
dB

frequency band of the central
frequency of the neighboring cell.
occupied uplink carrier central
frequency point of the cell. It is
UTRA absolute radio frequency
channel No., corresponding to
the central
frequency
of the
This
parameter
indicates
the
carrier
used
by the carrier
uplink central
occupied
downlink
channel
the central frequency of the
carrier used by the downlink
The
cell primary scrambling code
channel.
is used to distinguish the cell.
There are 512 downlink primary
scrambling codes in UTRAN
totally.
{freqBandInd==0}
[9612..9888],
{freqBandInd==1}
[9262..9538][12]
0:
Band I
[37][62][87][112]
1:
Band II
[137][162][187]
{freqBandInd==0}
2:
Band III
[212][237][262]
[10562..10838],
4:
Band V
[287],
{freqBandInd==1}
5: Band VI
{freqBandInd==2}
[9662..9938][412]
7:
Band VIII
[937..1288],
[437][462][487]
{freqBandInd==3}
[512][537][562]
[1312..1513][1662]
[587][612][637]
[1687][1712][1737]
[662][687],
[1762][1787][1812]
{freqBandInd==2}
[1837][1862],
[1162..1513],
{freqBandInd==4}
{freqBandInd==3}
[4132..4233][782]
[1537..1738][1887]
[787][807][812]
[1912][1937][1962]
[837][862],
[1987][2012][2037]
{freqBandInd==5}
[2062][2087],
[4162..4188][812]
{freqBandInd==4}
[837],
[4357..4458][1007]
{freqBandInd==7}
0..511,
Step 1
[1012][1032][1037]
[2712..2863]
[1062][1087],
{freqBandInd==5}
[4387..4413][1037]
[1062],
{freqBandInd==7}
-10..50, step 0.1
[2937..3088]
RNC
Inter_RNC
Parameter
External
UTRAN Cell
Inter_RNC
Parameter
RNC
Inter_RNC
Parameter
External
UTRAN Cell
Inter_RNC
Parameter
RNC
Handover Control
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
External
UTRAN Cell
HSUPA Packet
Scheduling
External
UTRAN Cell
Inter_RNC
0: Supported
Adjencent cell Basic 1: Not Supported
Parameter
N/A
This parameter indicates if the

neighboring cell supports Closed RNC
Loop Mode1.
Inter_RNC
0: Supported
Parameter
N/A

the neighboring UTRAN cell..
External
UTRAN Cell
Handover Control
2, 3
N/A

internationally.
RNC
RAN Sharing
0..999
N/A
the MNC for the shared operator

RNC
of CELL
RAN Sharing
0..999
N/A

PCPICH transmission power of
This
parameter indicates
the
the neighboring
cell. It is an
minimum
required
quality
level of
absolute value.
the cell which satisfies the
condition of being selected or
reselected by UE. When the
measurement quantity is CPICH
This
parameter
the
Ec/No,
only the indicates
measuredif quality
transmit
active incan
the
of the celldiversity
is over is
Qqualmin
neighboring
cell.
It
is
decided
by
the cell be selected. This
PSCH/SSCH
TSTD
indicator,
parameter is the Qqualminimum
PCPICH
indicator and
broadcastSTTD
in SIB11.
PCCPCH STTD indicator. Only
when the three indicators are all
active, this parameter will be
active, otherwise, this parameter
This
parameter
will be
inactive. indicates
whether STTD can be used on
the downlink DPCH of the cell.
N/A
N/A
N/A
N/A
dBm
-24..0, Step 1
dB
0: Inactive
1: Active
N/A
This parameter indicates the CS

+
PSparameter
domain service
areathe
code
This
indicates
of
thelength
neighboring
cell. Service
code
of the MNC
BCD of
area
code uniquely
identifies
the neighboring
UTRAN
cell..one
or several cells belonging to the
same Location Are (LA). Service
area code indicates the UE
location for CN. SAC belongs to
SAI (SAI = PLMN-ID + LAC +
SAC). SAC is set by the operator
via
O&M. One
cell may
ThisRNC
parameter
indicates
the
belong
to
one
or
two
SACs:
UTRAN registration area
ID.One
One
is
CS
+ PS
domain
cell
can
belong
to atSAC
mostand
fourthe
other
BC domain
One of
URAs.isDifferent
UEsSAC.
that reside
them
must
be
CS
+
PS
domain
in this cell can belong to different
SAC.
URA.
External
UTRAN Cell
Handover Control
External
UTRAN Cell
Inter_RNC
Parameter
N/A
External
UTRAN Cell
Inter_RNC
Adjencent cell Basic N/A
Parameter
N/A
External
UTRAN Cell
Inter_RNC
Parameter
N/A
External
UTRAN Cell
Handover Control
0..65535
N/A
RNC
Handover Control /
Load Balance
/Admission
Control /HSDPA
Introduction ,
/HSUPA Introduction
0: Not Support
HSUPA and
HSDPA
1: Support HSDPA
N/A
and DCH
3: Support HSUPA
, HSDPA and DCH

whether the neighboring cell
supports F-DPCH.
RNC
Inter_RNC
0: Supported
Parameter

supports Enhanced F-DPCH.
UTRAN Cell
HSPA Evolution

supports MIMO or not.
RNC
Handover Control
0: Not Supported
1: Supported
N/A

supports to activate MIMO and
downlink 64QAM at the same
time.
RNC
HSPA Evolution
0: Not Supported
1: Supported
N/A

supports downlink 64QAM or
not.
RNC
Inter_RNC
0: Not Supported
1: Supported
Parameter
N/A

whether the adjacent cell
supports the Uplink Enhanced
Layer 2 function or not.
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

number of shared network area
code that the neighboring cell
belongs to.
the neighboring cell belongs to.
One cell can belong to at most
four SNACs (shared network
area code).
supporting type of DCH, HSDPA
and HSUPA of the neighboring
cell.
2, 3
0: Supported
1: Not Supported
N/A
N/A
N/A

supports flexible MAC-d PDU
size or not.
Inter_RNC
0: Not Supported
1: Supported
Parameter
N/A
HSPA Evolution
0: Not Supported
1: Supported
N/A
External
UTRAN Cell
HSPA Evolution
0..65535
N/A
External
UTRAN Cell
Handover Control
0: False
1: True
N/A
RNC
This parameter indicate whether

External
Dual-Cell HS-DSCH is supported
UTRAN Cell
for the neighbor cell over Iur.
This parameter describes the

Possible Secondary Serving Cell
ID for the neighbor cell over Iur.
whether PCPICH transmission
power is configured.
Cell
description
type, which
PCPICH
transmission
power is
indicates
the
type
to describe
the
valid when this parameter
is set
cell,
can
be
type
of
"polygon"
or
"True" . Otherwise, PCPICH
"arch"
, or "cell
center
cell
transmission
power
is +
invalid.
radius" . When RNC receives the
message of RANAP LOCATION
REQUEST from CN, which
requires reporting the location
This
parameter
identifies
how
results
with Geographical
Area
This
parameter
indicates the
many
points
should
be
included
(GA) of direction
the cell, this
parameter
latitude
of the
polygon
in
the polygon
cell.location
If the
the
decides
how RNC
tooffillthe
in the
point.
When
receives
cell
is
described
in
type
of
results
in
RANAP
LOCATION
"polygon"
REPORT.
REQUEST, the
frombest
CN,number
which of
points is reporting
decided during
network
requires
the location
planning.
cell
is described
This
indicates
the
resultparameter
withEach
Geographical
Area
with
own
number
points.
absolute
value
ofif the
polygon
(GA)it's
of the
cell,
theof
cell
is
point
latitude.
When
RNC
described
in type
of "polygon"
,
receives
the message
RANAP
this parameter
decidesofhow
to fill
LOCATION
REQUEST
CN,
in the location
results infrom
RANAP
which
requires
reporting
the
LOCATION
REPORT.
This
location
withofGeographical
parameter
one
the
value of result
theispolygon
point
Area
(GA) When
oftothe
cell, ifreceives
the
parameters
describe
the cell
cell is
in
longitude.
RNC
described
in type
of indicates
"polygon" ,
typemessage
of "polygon
".It
the
of RANAP
this
parameter
decides
how
whether
the REQUEST
latitude
direction
offill
LOCATION
from to
CN,
in
the
location
results
in
RANAP
the polygon
point
is souththe
or
which
requires
reporting
LOCATION
REPORT.
This
north.
location result
with Geographical
parameter
is one
of the
Area (GA) of
the cell,
if the cell is
parameters
describe
the cell, in
described into
type
of "polygon"
type
of
"polygon
".It
indicates
this parameter decides how tothe
fill
geographical
of
This
indicates
the
in theparameter
locationlatitude
results
in the
RANAP
polygon
point.
latitude
direction
of theThis
cell
LOCATION
REPORT.
center.
This
parameter
is
parameter is one of the one of
the
parameters
to describe
parameters
to describe
the the
cell in
cell
of "cell
typeinoftype
"polygon
", central
indicating the
point"
.It indicates
whether
the
geographical
longitude
of the
the
This
parameter
indicates
latitude
the
cell
polygondirection
point.
absolute
value ofof
the
latitude
center
south
or north.
degreeisfor
the cell
center. This
parameter is one of the
parameters to describe the cell in
type of
"cell central
point"the
.It
This
parameter
indicates
indicates
thelongitude
geographical
value of the
degree for
latitude
of the cell
center.
the cell center.
This
parameter is
one of the parameters to
describe the cell in type of "cell
central point" .It indicates the
geographical longitude of the cell
center.
0: Center Point
with Altitude and
Cell Radius
1: Polygon
2: Arc
External
UTRAN Cell
Location Service
External
UTRAN Cell
Location Service
3..15
N/A
External
UTRAN Cell
Location Service
0: North
1: South
N/A
External
UTRAN Cell
Location Service
0..90, step 1
External
UTRAN Cell
Location Service
-180..180, step 0.00001

s
External
UTRAN Cell
Location Service
0: North
1: South
External
UTRAN Cell
Location Service
0..90, step 0.00001 s
External
UTRAN Cell
Location Service
-180..180, step 0.00001

s
N/A
N/A

altitude direction of the polygon
This
is one
of thethe
point.parameter
When RNC
receives
parameters
describe
the cell in
message
of to
RANAP
LOCATION
type
of "cellfrom
central
REQUEST
CN,point"
which.It
indicates
the altitude
the cell
requires reporting
thefor
location
center.
result with Geographical Area
(GA) of the cell, if the cell is
described in type of "cell center +
cell radius" , this parameter
decides how to fill in the location
results in RANAP LOCATION
REPORT.
This parameter
is one
This parameter
is one of the
of
the
parameters
to
describe
parameters to describe the cellthe
in
cell inoftype
"cell center
type
"cellofcenter
+ cell + cell
radius"
indicatesthe
whether
the
radius" .It
, indicating
altitude
altitude
direction
of
the
cell
accuracy.
center is above or below the sea
level.
External
UTRAN Cell
Location Service
0..32767, Step 1
External
UTRAN Cell
Location Service
0: Height
1: Depth
N/A
External
UTRAN Cell
Location Service
0..990, Step 1
UTRAN Cell
Related
Location service
0..127
N/A
External
UTRAN Cell
Location Service
0..100, Step 1
External
UTRAN Cell
Location Service
0..1806627, Step
1
UTRAN Cell
Related
Location service
0..127
N/A

External
type of the transmission antenna
UTRAN Cell
in the cell
Location Service
0: Omni Antenna
1: Beam Antenna
N/A

latitude direction of the
External
transmission antenna is south or UTRAN Cell
north.
Location Service
0: North
1: South

geographical latitude coordinates External
of the transmission antenna in
UTRAN Cell
the cell.
Location Service
0..90, step 0.00001 s

longitude of the transmission
antenna in the cell
External
UTRAN Cell
Location Service
-180..180, step 0.00001

s

altitude of the transmission
antenna in the cell.
External
UTRAN Cell
Location Service
0..32767, Step 1
Altitude accuracy Code of cell

This parameter is one of the
type of "cell center + cell
radius" , indicating the
confidence of the position
This
information.
radius" , indicating the cell
radius. It takes the cell center
transmission antenna as the
When
UE maitain in a cell and
circle center.
RNC report cell the UE's
Location based on CELLID
position method, this parameter
indicates the horizontal accuracy
of the UE's position.
N/A
Direction of Antenna Altitude.

antenna of the cell is above or
below the level.
External
UTRAN Cell
Location Service
0: Height
1: Depth
N/A

offset angle of the transmission
External
UTRAN Cell
Location Service
0..360, Step 1
External
UTRAN Cell
Location Service
0..360, Step 1
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
0: Off
1: On
N/A
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
External
UTRAN Cell
Parameter for future 0: Not Supported

use
1: Supported
N/A

inner angel of the transmission
antenna of the cell.
whether establishing traffic CS
64 kbps in External UTRAN Cell
is allowed or not. If this switch is
"Off", it is invalid for traffic CS 64
kbps establishment; otherwise,
valid.
whether DeltaQrxlevmin in SIB11
is configured.
neighboring cell supports
TUTRAN-GPS common
measurement.

External
External UTRAN cell supports
UTRAN Cell
HS-DSCH congestion detection.
Overbooking on Iux
0: Not Supported
1: Supported
N/A

External
External UTRAN cell supports EUTRAN Cell
DCH congestion detection.
HSUPA Packet
Scheduling
0: Not Supported
1: Supported
N/A

External
neighboring cell supports E-DCH
UTRAN Cell
TTI 2ms.
Inter_RNC
0: Not Supported
1: Supported
Parameter
N/A
This parameter indicates the EDCH SF capability of the

neighboring cell.
External
UTRAN Cell
The parameter indicates the EExternal

DCH HARQ combining capability
UTRAN Cell
of the neighboring cell.
maximum UE DTX cycle
supported by the neighboring cell RNC
for continuous packet
connectivity DTX-DRX operation.
0: SF8
Inter_RNC
1: SF4
Adjencent cell Basic 2: 2SF4
N/A
Parameter
3: 2SF2
4:
and 2SF4
0: 2SF2
IR Combining
Capable
Inter_RNC
1: Combining
Adjencent cell Basic Capable
N/A
Parameter
2: IR and Chase
0:
5
Combining
1:
10
Capable
2: 20
3: 40
HSPA Evolution
N/A
4: 64
5: 80
6: 128
7: 160

whether continuous packet
connectivity DTX-DRX operation
is supported by the neighboring
cell or not.
whether continuous packet
connectivity
HS-SCCH
less
This parameter
indicates
the
operation
is
supported
by
the of
minimum required quality level
neighboring
cell
or
not.
This
parameterquantity
indicates
the
measurement
is CPICH
minimum
required
received
Ec/No, only
the quality
of the cell
power
of the cell which
is over level
Qqualminimum
can the
satisfies
the
condition
of being
cell be selected.
This parameter
selected
or reselectedbroadcast
by UE.
is the Qqualminimum
When
the
measurement
quantity
in SIB12.
can the cell be selected. This
This
parameter
parameter
is theindicates
Qrxlevminimum
whether
DeltaQrxlevmin
in SIB12
broadcast
in SIB12.
is configured.
NE Office
HSPA Evolution
0: Not Supported
1: Supported
N/A
NE Office
HSPA Evolution
0: Not Supported
1: Supported
N/A
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-24..0, Step 1
dB
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-115..-25, step 2
dBm
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
External
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-4..-2, step 2
dB
External
UTRAN Cell
RAN Transmission 0: 20ms

Overview/Handover 1: 100ms
Control
2: 400ms
N/A
External
UTRAN Cell
RAN Transmission
Overview
0..100, Step 1
ms

maximum bit rate on DL DCH
allowed in External UTRAN cell
for an NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

maximum bit rate on UL DCH
allowed in External UTRAN cell
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

allowed in External UTRAN Cell
for an RT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
This parameter is the Qrxlevmin

increment in SIB12.If present,
the actual value of Qrxlevmin =
This
parameter
indicates the
Qrxlevmin
+ DeltaQrxlevmin.
transport time delay between the
rnc and the adjacent cell.There
are three time delay levels: 20ms
(Low Earth Orbit and Terrestrial
transmission), 100ms (Medium
Earth Orbit transmission), 400ms
(Geostationary
Orbitthe
This parameter Earth
indicates
transmission).
transport delay jitter between the
RNC and the adjacent cell. The
value of FP TOAWS is related
with the parameter.

maximum bit rate on UL E-DCH
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control

UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

144, 256, 384,
512, 711, 1024,
kbps
1399, 1448, 2048,
2886, 3072, 4096,
5760,
11520
8, 16, 32,
64, 128,
144, 256, 384,
512, 711, 1024,
kbps
1399, 1448, 2048,
2886, 3072, 4096,
5760, 11520

whether the neighbouring cell of External
DRNC supports to activate Dual UTRAN Cell
Cell and MIMO at the same time.
HSPA Evolution

External UTRAN Cell
External
UTRAN Cell

0..255
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..255
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..255
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..255
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..255
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A
0: Not Supported
1: Supported
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..65535
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..4294967295
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..4294967295
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..4294967295
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..4294967295
use
N/A

External UTRAN Cell
External
UTRAN Cell

0..4294967295
use
N/A

supports uplink 16QAM or not.
External
UTRAN Cell
Inter_RNC
0: Not Supported
1: Supported
Parameter
N/A

supports E-DPCCH power
boosting or not.
whether Precoding Weight Set
Restriction is supported by the
neighbouring cell of the DRNC.
Supporting Precoding Weight
Set
indicates
ThisRestriction
parameter also
indicates
the
VAM
is
supported.
geographical area report type of
the cell.when CN requires RNC
to report the location result with
the type of Geographical Area
(GA), this parameter decides the
format of the report in detail.
This parameter identifies
whether the local cell is the
designated zone or not.
whether DB DC-HSDPA is
supported by the cell under
DRNC.
number of DB Secondary
Serving Cell for the neighbor cell
over Iur.
This parameter describes the DB
Secondary Serving Cell ID for
the neighbor cell over Iur.
MAX_NUM_DB_SECOND_CEL
L indicates the number of DB
Secondary Serving Cell for the
This
parameter
indicates
thatisthe
neighbor
cell over
Iur, which
4.
adjacent RNC cell and the
serving cell in this RNC
represent the same physical cell
in the same
NodeB,
the HSDPA
two cells,
When
the cell
supports
backup
each other
this parameter
is used to activate
RAB
setup/configuration/handover on
HSDPA channel.Modification of
this parameter has no effect on
the delete or setup of the HSDPA
channel.
Number of SF=16 Used in HSPDSCH
Number of SF=128 Used in HSSCCH
External
UTRAN Cell
UTRAN Cell
External
UTRAN Cell
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
0: Ellipsoid Point
1: Ellipsoid Point
Inter_RNC
0: Not Supported
Adjencent cell Basic with Uncertainty
1:
Supported
Circle
Parameter
2: Ellipsoid Point
with Uncertainty
Ellipse
3: Ellipsoid Point
Location Service
with Altitude
4: Ellipsoid Point
with Altitude and
Uncertainty
Ellipsoid
0: False
Location Service
5:
List of Ellipsoid
1: True
Points
6: Ellipsoid Arc
N/A
N/A
N/A
N/A
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
External
UTRAN Cell
Load Balance
1..4
N/A
External
UTRAN Cell
Load Balance
0..65535
N/A
External
UTRAN Cell
Node B
Management
0..65535
N/A
UtranCell
Admission
Control/HSDPA
Introduction
0: Inactive
1: Active
N/A
External
UTRAN Cell
N/A
1..15
N/A
External
UTRAN Cell
N/A
1..32
N/A
HSPA Evolution
0: Not Supported
1: Supported
N/A

the DRNC cell can active the
STTD of downlink control
External
channel (HS-SCCH, F-DPCH, EUTRAN Cell
AGCH, E-HICH, E-RGCH) when
the ue active the MIMO of
PCPICH and SCPICH

whether DC-HSUPA is supported UTRAN Cell
by the cell under DRNC.
separate Iur transport bearer
mode whether to be supported.
If its value is "1: Supported" , the
UTRAN Cell
Mac-d flows from each carrier
This
uses parameter
different Iurindicates
transportthe EDCH
UL Flow Multiplexing
bearers.
whether to be supported.
If its value is "1: Supported" , the
Mac-d flows received on the
UTRAN Cell
different carriers is multiplexed
on one Iur transport bearer (per
Mac-d flow)..
External GSM Cell Object ID
This parameter indicates BCCH
absolute radio frequency channel
No. of GSM neighboring cell,
which corresponds to the central
This parameter
neighboring
frequency
of theiscarrier
used by
cell
identity, it is valid only in the
BCCH.
LAC
the cell locates.
[512,where
885] corresponds
to Band
DCS1800
[512, 812] corresponds to Band
PCS1900
[0,
124]the
and
[9575, 1023]
When
neighboring
cell is
correspond
to
band(Base
GSM900
GSM cell, its BSIC
[259,
293] corresponds
to Band
transceiver
Station Identity
GSM450
Code) consists of NCC (Network
[306,
corresponds
Band
Colour340]
Code)
and BCC to
(Base
GSM480
Station
Colour
Code).
NCC
When
the neighboring
cell
is
[438,
511]
corresponds
to Band
identifies
the
network,
such
as,
GSM
cell,
its
BSIC
(Base
GSM750
different
GSM
networks
beside
transceiver
Station Identity
[128,
251] corresponds
to Band
the
border.
BCCofidentifies
the
Code)
consists
NCC (Network
GSM850
cells
that
use
the
same
BCCH
Colour Code) and BCC (Base
frequency
point.Code). NCC
Station Colour
identifies the network, such as,
different
GSM networks
This parameter
indicatesbeside
the
the
border.
BCC
identifies
LAC of the neighboring
cellthe
cells
thatItuse
the same
BCCH
locates.
identifies
different
frequency
point.
location area.
LAC belongs to
LAI (LAI = MCC + MNC + LAC).
One location area includes many
cells.
internationally.
LAC of the neighboring cell
locates. It identifies different
location area. LAC belongs to
cells.
DRBC
0: Not Supported
1: Supported
N/A
DRBC
0: Not Supported
1: Supported
N/A
DRBC
0: Not Supported
1: Supported
N/A
RNC
Parameter
0..999999999999
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
RNC
Adjacent Gsm cell

Basic Parameter
RNC and
PLMN
Adjacent Gsm cell

Basic Parameter
RNC and
PLMN
Adjacent Gsm cell

Basic Parameter
0..7
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
1..65533, 65535
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
0..999
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
0..999
N/A
Adjacent Gsm cell

Basic Parameter
0..255
N/A
The parameter indicates RAC of

RNC
the Gsm cell.
{bandIndicator==0
} [512..885],
0..65535
{bandIndicator==1 N/A
} [512..812],
{bandIndicator==2
} [0..124]
[955..1023],
{bandIndicator==3 N/A
} [259..293],
{bandIndicator==4
} [306..340],
{bandIndicator==5
}0..7
[438..511],
N/A
{bandIndicator==6
} [128..251]
Routing Area Colour Code
external Gsm
Cell
Adjacent Gsm cell

Basic Parameter
0..255
N/A

the neighboring GSM cell.
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
2, 3
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
0..999
N/A
RNC and
PLMN
Adjacent Gsm cell

Basic Parameter
0..999
N/A
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
2, 3
N/A

internationally.
sharing LAC of the neighboring
cell locates. It identifies different
location area. LAC belongs to
cells.
the neighboring GSM cell.
0: Not GERAN
Cell
1: GERAN Cell

whether the GSM cell is GERAN UTRAN Cell
cell
Handover Control
This parameter indicates BSC

Identifier, which GSM Cell
belongs to.
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
RNC
Adjacent Gsm cell

Basic Parameter
RNC
Adjacent Gsm cell

Basic Parameter
Node B
Adjacent Gsm cell

Basic Parameter
UTRAN Cell
Adjacent Gsm cell

Basic Parameter
GSM
Neighboring
Cell
Idle Mode and

Common Channel
0..7
Behavior /Handover
Control

number of shared network area
code that the neighboring cell
belongs to.
the neighboring cell belongs to.
One cell can belong to at most
four SNACs (shared network
area code).
This parameter identifies which
frequency band the BCCH
ARFCN GSM neighboring cell
This
uses parameter indicates the
maximum UE allowed uplink
transmit power in the GSM cell.If
the current UE uplink transmit
power is above the indicated
power value, UE shall decrease
the power to a level at or below
the power value for lowering the
This
parameter indicates
the
UL interference
to other users.
HCS priority level (0-7) for the
0..65535
0..DBS_RR_MAX_
NUM_SNAC_PER
_GSMCEL
0: DCS 1800 Band
Used;
1: PCS 1900 Band
Used;
0..65535
2: Standard GSM
900 Band Used
3: GSM 450 Band
Used
4: GSM 480 Band
Used
5: GSM 750 Band
Used
6: GSM 850 Band
Used
7:
Extended
-50..33,
StepGSM
1
900 Band Used
8: Railways GSM
900 Band Used
N/A
N/A
N/A
N/A
N/A
dBm
N/A

minimum required received
power level of the cell which
This
parameter
parameter
is theindicates
Qrxlevminimum
whether
DeltaQrxlevmin
in SIB11
broadcast
in SIB11.
is configured.
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-115..-25, step 2
dBm
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-4..-2, step 2
dB
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-115..-25, step 2
dBm
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-4..-2, step 2
dB
GSM
Neighboring
Cell
Handover Control
-50..50, step 1
dB
GSM
Neighboring
Cell
Handover Control
1..100, step 1
GSM
Neighboring
Cell
Handover Control
1..100, step 1
GSM
Neighboring
Cell
Handover Control
1..100, step 1

GSM
uplink overload threshold in GSM Neighboring
system.
Cell
Handover Control
1..100, step 1
Gsm
Neighboring
the cell is indoor cell or not.
Cell
Handover Control
0: False
1: True
N/A
This parameter is the Qrxlevmin

increment
in SIB11.
If present,
This parameter
indicates
the
the
actual
value
of
Qrxlevmin
minimum required received =
Qrxlevmin
DeltaQrxlevmin
power
level+of
the cell which
This
parameter
parameter
is theindicates
Qrxlevminimum
whether
DeltaQrxlevmin
in SIB12
broadcast
in SIB12.
is configured.
An offset is allocated for each
cell being monitored. The offset
This
parameter
is the
Qrxlevmin
can be
positive or
negative.
increment
in
SIB12.If
present,
Before the UE judges whether an
the
actual
value
of Qrxlevmin
=
event
occurs,
adds
the offset to
Qrxlevmin
+ DeltaQrxlevmin.
the
measurement
result. If the
PCPICH uses a positive offset,
the UE sends the measurement
report just like PCPICH is x dB
better than the actual case. Or, if
the PCPICH uses a negative
offset, the PCPICH report is
limited. When the cell individual
This
indicates
the
offsetparameter
is used, the
corresponding
downlink
overload
threshold in
cell is possibly
(at least
GSM
system.the target cell of the
temporarily)
handover or removed from the
active set.
uplink overload threshold in GSM
system.

downlink overload threshold for
RT service in GSM system.
This parameter is UTRAN Cell

Object ID
RNC
Parameter
0..2147483647
N/A
Cell Identity is valid only in the

RNC where the cell locates.
UTRAN Cell
Parameter
0..65534, Step 1
N/A
The local cell ID represents

resources in the Node B that can
UTRAN Cell
be used for the configuration of a
cell.
Node B
Management
0..268435455
N/A

maximum value for the linear
sum of the power of all downlink UTRAN Cell
physical channels, which is
allowed to be used in a cell.
Admission
Control /Node B
Management
0..50, step 0.1
dBm

PICH transmission power, which
UTRAN Cell
is an offset relative to the
Primary CPICH power.
Node B
Management,
Power Control,
Connection
Management
-10..5, step 1
dB
Cell Mode
UTRAN Cell
N/A
1: FDD Mode
N/A

reference to ULocationArea
object.
RNC
Handover
Control
/MULTIPLMN
N/A
N/A
RNC
MULTIPLMN
N/A
N/A
UTRAN Cell
connection
management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
{freqBandInd==0}
N/A
[9612..9888],
{freqBandInd==1}
0:
Band I
[9262..9538][12]
1:
Band II
[37][62][87][112]
2:
Band III
[137][162][187]
{freqBandInd==0}
3:
Band IV
[212][237][262]
[10562..10838],
4:
Band V
[287],
{freqBandInd==1}
5: Band VI
{freqBandInd==2}
[9662..9938][412]
7:
Band VIII
[937..1288],
[437][462][487]
{freqBandInd==3}
[512][537][562]
[1312..1513][1662]
[587][612][637]
[1687][1712][1737]
[662][687],
[1762][1787][1812]
{freqBandInd==2}
[1837][1862],
[1162..1513],
{freqBandInd==4}
{freqBandInd==3}
[4132..4233][782]
[1537..1738][1887]
[787][807][812]
[1912][1937][1962]
[837][862],
[1987][2012][2037]
{freqBandInd==5}
[2062][2087],
[4162..4188][812]
{freqBandInd==4}
[837],
[4357..4458][1007]
{freqBandInd==7}
[1012][1032][1037]
[2712..2863]
[1062][1087],
{freqBandInd==5}
This parameter indicates CS +

PS
service
area code of
Thisdomain
parameter
indicates
the
cell. Service
area code
reference
to URoutingArea
uniquely
object. identifies one or several
cells belonging to the same
Location Area (LA). Service area
code is to indicate the UE
location for CN. SAC belongs to
SAI (SAI = PLMN-ID + LAC +
SAC). SAC is set by the operator
via RNC O&M. One cell may
belong to one or two SAC: One
This
indicates
is CSparameter
+ PS domain
SAC and the
frequency
band
of the
central
other is BC domain
SAC.
One of
frequency
of
the
cell.
them must be CS + PS domain
This
SAC.parameter indicates the
occupied uplink carrier central
the central
frequency
of the
This
parameter
indicates
the
carrier
used
by the carrier
uplink central
occupied
downlink
channel.
channel.
N/A
N/A
N/A
N/A
The cell primary scrambling code

is used to distinguish the cell.
There are 512 downlink primary UTRAN Cell
scrambling codes in UTRAN
totally.
transmission power level of the
Primary CPICH (Common Pilot UTRAN Cell
Channel), which is an absolute
value.
Node B
Management /Code 0..511
allocation
N/A
Power Control
-10..50, step 0.1
dBm
Power Control
-35..15, step 0.1
dB
UTRAN Cell
Power Control
-35..15, step 0.1
dB
UTRAN Cell
Power Control
-35..15, step 0.1
dB
UTRAN Cell
Node B
Management,
Power Control,
Connection
Management
-22..5, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-24..0, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-115..-25, step 2
dBm
UTRAN Cell
Idle Mode and

Common Channel
Behavior
-4..-2, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: Reserved
1: Not Reserved
N/A
UTRAN Cell
HSPA Evolution
0: Supported
1: Not Supported
N/A
UTRAN Cell
Function Switch
0: Supported
1: Not Supported
N/A
PSCH transmission power. This

parameter is the offset relative to UTRAN Cell
PCPICH power.
SSCH transmission power. This

parameter is the offset relative to
PCPICH power.
BCH transmission power. This
parameter is the offset relative to
PCPICH transmission power.
BCH is mapped one to one to
PCCPCH physical channel. In
addition, one cell only contains
one PCCPCH/BCH.
AICH transmission power, which
is an offset relative to the
This
parameter
Primary
CPICH indicates
power. the
minimum required quality level of
This
parameterquantity
indicates
the
measurement
is CPICH
minimum
required
receivedquality
Ec/No, only
the measured
power
levelisof
theQqualmin
cell whichcan
of the cell
over
satisfies
the
condition
the cell be selected. of being
of
theparameter
cell is overindicates
Qrxlevmin
This
thecan
the
cell
be
selected.
extension of Qrxlevmin, which
This
parameter
is cell
reserved+
means
Qrxlevmin
= Qrxlevmin
indicator
for
operator
use.
When
DeltaQrxlevmin.
cell status is indicated as "not
barred" and "reserved" for
operator use, If the UE is
assigned an Access Class 11 or
15, the UE shall treat this cell as
candidate during the cell
selection and cell re-selection
procedures,
elseindicates
UEs shall
This
parameter
behave
if cellcan
status
"barred".
whetheras
STTD
be used
on
the downlink DPCH of the cell.

whether closed loop mode1 is
supported in the cell.

whether transmit diversity is
applied to the downlink common
physical channels or not.
An offset is allocated for each
cell being monitored. The offset
can
positive or
negative.
Thisbe
parameter
indicates
Before
thetoUE
judges whether an
reference
UUtranRegArea
event
object.occurs, adds the offset to
the measurement result. If the
PCPICH uses a positive offset,
the UE sends the measurement
the PCPICH uses a negative
offset, the PCPICH report is
limited. When the cell individual
offset
is used, the
corresponding
This parameter
indicates
cell
is
possibly
(at
least
reference to UIubLink object.
temporarily) the target cell of the
handover or removed from the
active set.
HCS priority level (0-7) for the
UTRAN Cell
Node B
Management
/Connection
Management
0: Inactive
1: Active
N/A
RNC
Parameter
N/A
N/A
UTRAN Cell
Handover Control
-10..10, step 0.5
dB
RNC
Parameter
N/A
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior / HCS
/Handover Control
0..7
N/A

transmission power of the PCH
mapped on the SCCPCH, which UTRAN Cell
is a power offset relative to the
PCPICH power.
Power Control
/Node B
Management
-35..15, step 0.1
dB
Address
N/A
0..255
N/A
Idle Mode and

Common Channel
Behavior
-24..0, step 0.5
dB
Idle Mode and

Common Channel
Behavior
-115..-26, step 1
dBm
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell

quality threshold levels for
applying prioritised hierarchical
UTRAN Cell
cell reselection, when
Ec/No.
quality threshold levels for
UTRAN Cell
cell reselection, when
RSCP.
indicating whether
UTRAN Cell
DeltaQrxlevmin used for cell
reselection is configured or not.
reference to
UNbComMeasProfile object.
RNC
NodeB
Management
N/A
N/A
This parameter is the DN

(Distinguish Name) of
UTrvMeasProfile.
UTRAN Cell
Dynamic Radio
Bearer Control
N/A
N/A

UUeIntMeasProfile.
timing delay
for area
defining
the
Indicates
theused
service
code
starting
time of the
SCH,
and
for BC domain
cellCPICH
is
the DL scrambling
code (s)
referenced.
It is required
to in
bea
cell relativewhen
to BFN.
configured
the cell
supports the cell broadcast
service. Otherwise, this
This
parameter
parameter
is notindicates
required the
to be
scenario
of
the
serving
cell.
configured.
SACBC indicates the BC domain
service area code of the cell.
Service area code is uniquely
identifies one or several cells in
the same Location Area (LA).
Service area code is to indicate
the UE location to CN. SAC
belongs to SAI (SAI = PLMN-ID
+
LAC
+ SAC). SAC
set by the
Cell
description
type,
This
parameter
is
theiswhich
sector
operator
via
RNC
O&M.
One cell
indicates
the
type
to
describe
the
identity of the cell.
contains
onetype
or two
SAC: Oneoris
cell,
can be
of "polygon"
CS + PS
SAC +and
"arch"
, ordomain
"cell center
cellthe
other
is .BC
domain
Onethe
of
radius"
When
RNCSAC.
receives
them
must
be
CS
+
PS
domain
SAC. SA of from
BC domain
can only
REQUEST
CN, which
contain one
cell. the location
requires
reporting
This
parameter
identifies
how
results
with Geographical
Area
This
parameter
indicates the
many
points
should
be
included
(GA) of direction
the cell, this
parameter
latitude
of the
polygon
in
the polygon
cell.location
If the
the
decides
how RNC
tooffillthe
in the
point.
When
receives
cell
is
described
in
type
of
results
in
RANAP
LOCATION
"polygon"
REPORT.
REQUEST, the
frombest
CN,number
which of
points is reporting
decided during
network
requires
the location
planning.
cell
is described
This
indicates
the
resultparameter
withEach
Geographical
Area
with
own
number
points.
absolute
value
ofif the
polygon
(GA)it's
of the
cell,
theof
cell
is
point
latitude.
When
RNC
described
in type
of "polygon"
,
receives
the message
RANAP
this parameter
decidesofhow
to fill
LOCATION
REQUEST
CN,
in the location
results infrom
RANAP
which
requires
reporting
the
LOCATION
REPORT.
This
location
withofGeographical
parameter
one
the
value of result
theispolygon
point
Area
(GA) When
oftothe
cell, ifreceives
the
parameters
describe
the cell
cell is
in
longitude.
RNC
described
in type
of indicates
"polygon" ,
typemessage
of "polygon
".It
the
of RANAP
this
parameter
decides
how
whether
the REQUEST
latitude
direction
offill
LOCATION
from to
CN,
in
the
location
results
in
RANAP
the polygon
point
is souththe
or
which
requires
reporting
LOCATION
REPORT.
This
north.
location result
with Geographical
parameter
is one
of the
Area (GA) of
the cell,
if the cell is
parameters
describe
the cell, in
described into
type
of "polygon"
type
of
"polygon
".It
indicates
this parameter decides how tothe
fill
geographical
of
This
indicates
the
in theparameter
locationlatitude
results
in the
RANAP
polygon
point.
latitude
direction
of theThis
cell
LOCATION
REPORT.
center.
This
parameter
is
parameter is one of the one of
the
parameters
to describe
parameters
to describe
the the
cell in
cell
of "cell
typeinoftype
"polygon
", central
indicating the
point"
.It indicates
whether
the
geographical
longitude
of the
the
This
parameter
indicates
latitude
the
cell
polygondirection
point.
absolute
value ofof
the
latitude
center
south
or north.
degreeisfor
the cell
center. This
type of "cell central point" .It
indicates the geographical
latitude of the cell center.
UTRAN Cell
Parameter
N/A
N/A
UTRAN Cell
Node B
Management
0..9, step 1
256chips
0: Dense City
Zone
1: Generic City
Zone
2: Suburb
3: Country
UTRAN Cell
Admission Control
UTRAN Cell
CBS
N/A
N/A
UTRAN Cell
Parameter
1..255
N/A
0: Center Point
with Altitude and
Cell Radius
1: Polygon
2: Arc
N/A
UTRAN Cell
Location Service
N/A
UTRAN Cell
Location Service
3..15
N/A
UTRAN Cell
Location Service
0: North
1: South
N/A
UTRAN Cell
Location Service
0..90, step 0.00001
UTRAN Cell
Location Service
-180..180, step 0.00001
UTRAN Cell
Location Service
0: North
1: South
UTRAN Cell
Location Service
0..90, step 0.00001
N/A

value of the longitude degree for
the cell center. This parameter is
one of the parameters to
describe the cell in type of "cell
central
point" .It indicates
indicates the
the
This
parameter
geographical
longitude
the cell
altitude direction
of the of
polygon
This
parameter
is
one
of
the
center.
point. When RNC receives the
parameters
describe
the cell in
message
of to
RANAP
LOCATION
type
of "cellfrom
central
REQUEST
CN,point"
which.It
indicates
the altitude
the cell
requires reporting
thefor
location
center.
result with Geographical Area
(GA) of the cell, if the cell is
described in type of "cell center +
cell radius" , this parameter
decides how to fill in the location
results in RANAP LOCATION
REPORT.
This parameter
is one
This parameter
is one of the
of
the
parameters
to
describe
parameters to describe the cellthe
in
cell inoftype
"cell center
type
"cellofcenter
+ cell + cell
radius"
indicatesthe
whether
the
radius" .It
, indicating
altitude
altitude
direction
of
the
cell
accuracy.
center is above or below the sea
level.
Altitude accuracy Code of cell
radius" , indicating the
confidence of the position
information.
radius" , indicating the cell
radius. It takes the cell center
transmission antenna as the
When
UE maitain in a cell and
circle center.
RNC report the shape of the cell
as the UE's position based on
CELLID position method, this
This
parameter
indicates the
UEhorizontal
accuracy.
geographical area report type of
the cell.when CN requires RNC
to report the location result with
the type of Geographical Area
(GA), this parameter decides the
format of the report in detail.
type of the transmission antenna
in the cell.
UTRAN Cell
Location Service
-180..180, step 0.00001
UTRAN Cell
Location Service
0..32767, Step 1
UTRAN Cell
Location Service
0: Height
1: Depth
N/A
UTRAN Cell
Location Service
0..990, Step 1
UTRAN Cell
Related
Location service
0..127
N/A
UTRAN Cell
Location Service
0..100, Step: 1
UTRAN Cell
Location Service
0..1806627, Step
1
0: Ellipsoid Point
1: Ellipsoid Point
with
Uncertainty
0..127
Circle
2: Ellipsoid Point
with Uncertainty
Ellipse
3: Ellipsoid Point
with Altitude
4: Ellipsoid Point
with Altitude and
Uncertainty
0:
Omni Antenna
Ellipsoid
1:
5: Beam
List of Antenna
Ellipsoid
Points
6: Ellipsoid Arc
UTRAN Cell
Related
Location service
UTRAN Cell
Location Service
UTRAN Cell
Location Service

latitude direction of the
UTRAN Cell
transmission antenna is south or
north.
Location Service
0: North
1: South

geographical latitude coordinates
UTRAN Cell
of the transmission antenna in
the cell.
Location Service
0..90, step 0.00001
N/A
N/A
N/A
N/A

longitude of the transmission
UTRAN Cell
Location Service
-180..180, step 0.00001

UTRAN Cell
Location Service
0..32767, Step 1
Direction of Antenna Altitude.

antenna of the cell is above or
below the level.
UTRAN Cell
Location Service
0: Height
1: Depth
N/A

offset angle of the transmission
UTRAN Cell
Location Service
0..360, Step 1

inner angel of the transmission
antenna of the cell.
UTRAN Cell
Location Service

support of DCH, HSDPA and
HSUPA in the cell.
UTRAN Cell
and PLMN

whether MBMS is supported in
the cell.
UTRAN Cell

whether multi-user detection is
supported in the cell.
UTRAN Cell

use
1: Supported
N/A

whether the cell support the
measurement based on GPS or
not.
UTRAN Cell

use
1: Supported
N/A
This parameter indicates CS

traffic is preferred in the cell.
UTRAN Cell
This parameter indicates R99 PS

UTRAN Cell
This parameter indicates HS PS

UTRAN Cell
0: Not Support
0..360,
HSUPAStep
and 1
HSDPA;
1: Support HSDPA
Handover Control
and DCH;
/Load Balance
2: Support HSDPA
/Admission
N/A
only;
Control /HSDPA
3: Support HSUPA
Introduction
, HSDPA and
/HSUPA Introduction 0: Not Support
DCH;
1:
4: Support
Support MBMS
HSUPA
and
not
MBMS;
and
HSDPA
Handover Control
N/A
2: Only Support
MBMS
Load Balance
0: CS No
Preferred
1: CS Preferred
N/A
Load Balance
0: R99 PS No
Preferred
1: R99 PS
Preferred
N/A
Load Balance
0: HS PS No
Preferred
1: HS PS
preferred
N/A
UTRAN Cell
Handover
Control /HCS /Idle 1: Not Used
Mode and Common 2: Used
Channel Behavior
UTRAN Cell
Handover Control
0: Off
1: On
N/A
UTRAN Cell
Handover Control
0: Off
1: On
N/A
UTRAN Cell
Handover Control
0: Off
1: On
N/A
UTRAN Cell
Idle Mode and

Common Channel
0: False
Behavior (Cell
1: True
Selection/Reselectio
n)
N/A
UtranCell
Admission
Control/HSDPA
Introduction
0: Inactive
1: Active
N/A
UtranCell
Admission Control
0: Inactive
1: Active
N/A
UtranCell
MBMS
0: Inactive
1: Active
N/A

intra-frequency measurement
configuration profile distinguish
name.
UTRAN Cell
and Service
Related
Handover Control
N/A
N/A
The parameter indicates Intrafrequency measurement profile

identity for VIP users.
UTRAN Cell
VIP QoS Guarantee N/A
N/A

inter-frequency measurement
name.
UTRAN Cell
and Service
Related
Handover Control
N/A
N/A

inter-Rat measurement
name.
UTRAN Cell
and Service
Related
Handover Control
N/A
N/A

whether the HCS is used or not.
handover switch based on uplink
transmit power. When the switch
is "On", if uplink transmit power
arrives at the threshold
configured by OMCR, RNC will
This
parameter
indicates
initiate
compressed
modethe
and
handover
switch
based
on uplink
inter-frequency or inter-RAT
transmit
power. When the switch
measurement.
is on, if uplink BLER quality
arrives at the threshold
This
parameter
indicates
thewill
configured
by OMCR,
RNC
handover
switch based
on and
initiate compressed
mode
downlink
transmit
power. When
inter-frequency
measurement.
the switch is on, if downlink
transmit power arrives at the
threshold configured by OMCR,
RNC will initiate compressed
mode and inter-frequency
measurement.
whether SIB12 is broadcast in
the cell.
When the cell supports HSDPA ,
this parameter is used to activate
RAB
HSDPA channel.Modification of
this parameter
has no effect
on ,
When
the cell supports
HSUPA
the
or setup
of the
HSDPA
this delete
parameter
is used
to activate
channel.
RAB
HSUPA channel.Modification of
this parameter has no effect on
the delete or setup of the HSUPA
channel.
When the cell supports MBMS ,
this parameter is used to activate
MBMS service
N/A
This parameter indicates the cell

This
type.parameter indicates the
Adjustment Scene, which is used
to distinguish difficult scene or
easy scene for Background
Noise
Adjusting.
When Automatically
the radio link set
is in the
The
easier
to
adjust,
the
less
out-of-sync state, after
receiving
error
between
Background
Noise
N_INSYNC_IND
successive
inWhen
the
radio
link
set is in the
and
the
real
value,
but
sync
indications
Node
B
shall
in-sync
state,
Node Bmaybe
shall start
mistakenly
adjusting
triggerT_RLFAILURE
the RL
Restoreafter
procedure
timer
happen.
and
indicate
which radio link set
receiving
N_OUTSYNC_IND
has
re-established
consecutive
out-of-sync
synchronization.
When
the
RL
indications.
Node
B set
shall
When
the
radio link
isstop
in the
Restore
procedure
is
triggered,
and
reset
timer T_RLFAILURE
in-sync
state,
shall
the
state
of theNode
radioBlink
setstart
upon
receiving
successive
timer
T_RLFAILURE
after
change to the in-sync
state.
N_INSYNC_IND
in-sync
receiving N_OUTSYNC_IND
indications.
If
T_RLFAILURE
consecutive out-of-sync
expires,
Node
B shall
trigger
indications.
Node
B shall
stopthe
RL
Failure
procedure
and
and reset timer T_RLFAILURE
indicate
which radio
link set is
upon receiving
successive
out-of-sync.
When
the RL Failure
N_INSYNC_IND
in-sync
procedure
the state
indications.isIftriggered,
T_RLFAILURE
of
the
radio
link
set
change
expires, Node B shall triggertothe
the
out-of-sync
state. and
RL Failure
procedure
indicate
which radio
link set is
This parameter
identifies
out-of-sync.
Whencell
theisRL
whether the local
theFailure
procedure
is
triggered,
the
designated zone or not. state
of the radio link set change to
the out-of-sync state.
UTRAN Cell
and PLMN
Handover Control,
Idle Mode and
Common Channel
Behavior
0: Macro Cell
1: Normal Cell
2: Micro Cell
N/A
0: Normal Scene
1: Easy
Adjustment Scene
N/A
2: Difficult
adjustment Scene
UtranCell
Admission Control
UTRAN Cell
and PLMN
Node B
Management
1..256, Step 1
N/A
UTRAN Cell
and PLMN
Node B
Management
1..256, Step 1
N/A
UTRAN Cell
and PLMN
Node B
Management
0..25.5, step 0.1
UTRAN Cell
Location Service
0: False
1: True
N/A
This parameter is the detected

set handover control switch.
UTRAN Cell
Handover
Control /RAN
Performance
Monitor

inter-frequency handover tactic.
UTRAN Cell
Handover Control

inter-RAT handover tactic.
UTRAN Cell
Handover Control
0: Off
1: On
0: Algorithm
Deciding
1: 2A Event
Trigger
2: 2B Event
Trigger
3:
2C Event
0: Algorithm
Trigger
Deciding
1: 3A Event
Trigger
2: 3C Event
Trigger
N/A
N/A
N/A

maximum allowable data rate on UTRAN Cell
DCH to be increased to when UE and PLMN
is in the macro diversity.
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

allowed in serving cell for an
NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
This parameter indicates UTRAN

measurement quantity for interUTRAN Cell
frequency and inter-RAT
measurements.
This parameter indicates UTRAN
measurement quantity for intra- UTRAN Cell
frequency measurements.

maximum times for a paging
UTRAN Cell
message to be sent.
This parameter indicated the
used USrvPcProfile (Service
Related Power Control Profile).
Each cell obtains the service
UTRAN Cell
related power control parameters
according to the profile DN
indicated by this parameter.
whether SIB4 is broadcast in the UTRAN Cell
cell.
Handover Control
0: Ec/No
1: RSCP
2: Ec/No and
RSCP
N/A
Handover Control
0: Ec/No
1: RSCP
2: Ec/No and
RSCP
N/A
Connection
Management
1..6
N/A
Power Control
N/A
N/A
Idle Mode and

Common Channel
0: False
Behavior (Cell
1: True
Selection/Reselectio
n)
N/A

whether SIB6 is broadcast in the UTRAN Cell
cell.
Connection
Management
0: False
1: True
N/A

whether PCCPCH Information is UTRAN Cell
configured in SIB6.
Connection
Management
0: False
1: True
N/A

whether dynamic persistence
UTRAN Cell
level information of SIB6 PRACH
is configured in SIB7.
Connection
Management
0: False
1: True
N/A
This parameter indicates SIB7

originator is RNC or NodeB.
power Control
0: NodeB
1: RNC
N/A
Load Balance
-24..0 , step 1
dB
Load Balance
-120.. -25, step 1
dBm
Power Control
0..30
N/A
UTRAN Cell

Cpich
Ec/N0
threshold
If
higher
layers
indicatefor
by blind
"First
handover
in procedure
of service
RLS
indicator"
that the radio
link
reconfiguration.
reported
Cpich UTRAN Cell
is part of the firstIfradio
link set
Ec/N0
less
equal
sent
toisthe
UEthan
andor
the
valueto'n'
EcNoQualThrd,
blind
handover
obtained
from
this
parameter
This parameter indicates the "DL
will
not
be triggered.
TPC
pattern
01
count" passed
Cpich
RSCP
threshold
for blindby
higher
layers
is differentoffrom
0
handover
in procedure
service
then
:
reconfiguration.
If reported Cpich UTRAN Cell
-RSCP
the TPC
pattern
consist
is less
thanshall
or equal
to of
n
instances of the
pairhandover
of TPC
RscpQualThrd,
blind
commands
("0" , "1"), followed
will not be triggered.
by one instance of TPC
command "1", where ("0", "1")
UTRAN Cell
indicates the TPC commands to
be transmitted in 2 consecutive
slots,
- the TPC pattern continuously
repeat but shall be forcibly restarted at the beginning of each
frame where CFN mod 4 = 0.
else
The indication of this cell

whethere or not reserved RUB
Connection
management
0: False
1: True
N/A
This parameter indicates cell

switch of fast return to EUTRAN
for CS service.If the switch is On,
utranCell
when CS is released, frequency
of Eutran is filled in redirection
IE.
Handover Control
0: Off
1: On
N/A

maximum allowed UL
transmission power of RACH.
Idle Mode and

Common Channel
Behavior
UtranCell
UTRAN Cell
The parameter indicates typical

PRACH configuration scenarios.
For each scenario, the
UtranCell
corresponding PRACH
parameters can be set as
different
values.indicates
This parameter
whether DB DC-HSDPA is
supported. If supported, UE can
UTRAN Cell
use resource on two carriers of
different frequency band. The
throughput is improved.
type that DPI applied. This type
UTRAN Cell
is used to choose the DPI
related parameters.
Node B
Management
HSPA Evolution
0: One PRACH
Channel of R99
1: One PRACH
Channel
of R99
-50..33, step
1
dBm
and One PRACH
Channel of
Enhanced Uplink
Fach with the
Same Preamble
N/A
Scrambling Codes
2: One PRACH
Channel of R99
and One PRACH
Channel
of
0: Not Supported
Enhanced
Uplink N/A
1: Supported
Fach with the
Different Preamble
Scrambling Codes
Deep Packet
Inspection
N/A
N/A
RNC
connection
management
0: Off
1: On
N/A
RNC
connection
management
0: Off
1: On
N/A
RNC
connection
management
0: Off
1: On
N/A
Switch of CS Call Reestablishment Triggered by RAN

RNC
Network when SRNC is in Stable
Status
connection
management
0: Off
1: On
N/A

RNC
network when SRNC is in
Handover Flow
connection
management
0: Off
1: On
N/A

RNC
network when SRNC is in RAB
Setup Flow
connection
management
0: Off
1: On
N/A

Receiving the CELL UPDATE
Message from UE when SRNC
is in Stable Status
is in Handover Flow
is in RAB Setup Flow

is in RB/Trch/Phych Reconfig
Flow
is in Stable Status
is in Handover Flow
is in RAB Setup Flow
RNC
connection
management
0: Off
1: On
N/A
RNC
connection
management
0: Off
1: On
N/A
RNC
connection
management
0: Off
1: On
N/A
RNC
connection
management
0: Off
1: On
N/A
Switch of PS Call Reestablishment Triggered by RAN

RNC
Network when SRNC is in Stable
Status
connection
management
0: Off
1: On
N/A

RNC
network when SRNC is in
Handover Flow
connection
management
0: Off
1: On
N/A
connection
management
0: Off
1: On
N/A
connection
management
0: Off
1: On
N/A
Connection
Management
0..65535
N/A

Scenario Type for network
UTRAN Cell
planning and network
optimization parameters in a cell.
Handover Control
0..40
N/A

number of the SF128 codes
reserved for OCNS (OCNS:
Orthogonal Channel Noise
Source).
UTRAN Cell
Code Resource
Allocation
0..30
N/A

code index of SF =128 for
OCNS. (OCNS: Orthogonal
Channel Noise Source).
UTRAN Cell
Code Resource
Allocation
1..127, Step 1
N/A

RNC
network when SRNC is in RAB
Setup Flow
RNC
is in RB/Trch/Phych Reconfig
Flow
Virtual Location Area Code of the
UTRAN Cell
Cell, which is used to expand the
paging range

whether establishing traffic CS
64 kbps in the cell is allowed or
UTRAN Cell
not. If this switch is "Off", it is
invalid for traffic CS 64 kbps
This
parameterotherwise,
indicates MIMO
establishment;
valid.
pilot mode. "0: P-CPICH + PCPICH" means two antennas
both transmit P-CPICH. "1: PUTRAN Cell
CPICH + S-CPICH" means two
antennas transmit P-CPICH and
S-CPICH respectively.
whether the cell supports FUtran Cell
DPCH.
Dynamic Radio
Bearer Control
/Handover Control
0: Off
1: On
N/A
HSPA Evolution
0: P-CPICH + PCPICH
1: P-CPICH + SCPICH
N/A
HSPA Evolution
0: Not Supported
1: Supported
N/A

whether the cell supports
Enhanced F-DPCH or not
Utran Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

whether the cell supports the
64QAM function or not.
Utran Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

MIMO function or not.
Utran Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

CPC function or not.
Utran Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

HSUPA 2ms TTI function or not.
UTRAN Cell
Related
HSUPA Introduction
0: Not Supported
1: Supported
N/A

whether VAM is supported
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

whether STTD must be activated
when MIMO is activated. If the
UTRAN Cell
value is set to 'Bind', MIMO can
be not be activated unless STTD
was activated
whether the serving cell supports
UTRAN Cell
to activate downlink MIMO and
downlink 64QAM at the same
time
Dual-Cell HS-DSCH is supported UTRAN Cell
in this cell.
HSPA Evolution
0: Not Bind
1: Bind
N/A
HSPA Evolution
0: Not Supported
1: Supported
N/A
HSPA EVOLUTION
0: Not Supported
1: Supported
N/A
redirection function triggered by

radio resource congestion is
open. If the switch is off, when
RRC Connection Request to be
setup on DCH/DCH is rejected
because of radio resource
congestion, RRC redirection is
not performed, and RRC
UTRAN Cell
This
parameter
connection
can indicates
continue to try to
whether
the redirection; If
be setupprovide
on the RACH/FACH
information
RRCRRC
the switch iswhen
on, when
Connection
or
Connection request
Requestistorejected
be setup
RRC
Connection
is released
on DCH/DCH
is rejected
because
are forced to
UTRAN Cell
because services
of radio resource
release.
If
UE
receive
the
congestion, RRC Redirection
redirect
cell
based on
theinformation,
value of theit will try
to
access
to
UMTS
by the
parameter
PriRedirectRat
This parameter defines
theistime
indicated
frequency
or
to
allowed.
period the UE has to wait the
before
indicated RAT.
repeating
the accessing request RNC
procedure after UE receives
RRC CONNECTION REJECT.
Connection
Management
Connection
Management
Connection
Management
0: Off
1: Prior to InterFrequency,
secondly to InterRAT \ (Prior to
0:
Off Cell\)
GSM
1:
2: On
Prior to InterFrequency,
Secondly to InterRAT \ (PS prior to
E-UTRA, CS Prior
to GSM\)
3: Prior to InterRAT \ (Prior to
GSM\), Secondly
to Inter-Frequency
0..15,
1
4: PriorStep
to InterRAT \ (PS prior to
E-UTRA, CS Prior
to GSM\),
Secondly to Inter0:
Not Supported
Frequency
1: Supported
N/A
N/A

whether the downlink Enhanced
CELL_FACH can be supported
by the cell.
UTRAN Cell
HSPA Evolution

whether the uplink Enhanced
CELL_FACH is open.
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A

whether the cell supports to
activate Dual Cell and MIMO at
the same time.
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
Radio Capacity of Cell
UtranCell
Volum Capacity
Control

whether the cell is high load cell
or not.
UTRAN Cell

load balance scenarios. For each
scenario, the corresponding load
balance parameters can be set
as different values.
SCCPCH configuration
scenarios. For each scenario,
the corresponding load balance
parameters can be set as
different values.
be set as different values.
For each scenario, the
be set as different values.The
parameter indicates scenarios
related to cell radius.
UTRAN Cell
UTRAN Cell
Related
UTRAN Cell
UTRAN Cell
0: 2 SCCPCHs are
Configured, not
0..65535,
1
SupportingStep
MBMS,
not Supporting
CBS
1: 2 SCCPCHs are
0: Normal Load
Configured,
not
Power Control
Cell
Supporting MBMS,
1: High Load
Cell
Supporting
CBS
2: 1 SCCPCH is
Configured,
not
0: Close Load
Supporting
MBMS,
Balance
not
Supporting
Load Balance
1: Open
Load
CBS
Balance
3: 1 SCCPCH is
Configured, not
Supporting MBMS,
Configuration Model Supporting CBS
Scene Parameter
4: 2 SCCPCHs are
Configured,
Supporting
MBMS,
0: Outdoor Scene
not
Supporting
1: High-Mobility
CBS
Outdoor Scene
Handover Control
5:
SCCPCHs
2: 2
Indoor
Sceneare
Configured,
3: Subway/ tunnel
Supporting MBMS,
Scene
0:
[0~5]km CBS
Supporting
1:
6: [5~10]km
3 SCCPCHs are
Idle Mode and
2: [10~40]km
Common Channel Configured,
3:
[40~140]km
Supporting
MBMS,
Behavior
4:
not[140~200]km
Supporting
5:
[200~ Infinity]km
CBS
7: 3 SCCPCHs are
Configured,
Supporting MBMS,
Supporting CBS
N/A
Erl
N/A
N/A
N/A
N/A
N/A
whether the available

subchannel numbers are
consecutive in the cell.If this
parameter is set to"1", the actual
available subchannel number is
the result of "AvailSubChanNum
& (111111111111)", it means the
subchannel can be set be
consecutive.If this parameter is
set to"0", the actual available
subchannel number is the
maxminum subchannel of
This
parameter indicates
"AvailSubChanNum
&
whether
deferred and
(101010101010)"
SIB11/11bits/12
is supported.
"AvailSubChanNum
&
(010101010101)" , it means the
This
parameter
indicates the
subchannels
is nonconsecutive.
priority which the frequency is
switched
off intelligently.
is the
This parameter
indicates0the
highest
priority.
The
lower
the
index of the configuration of the
priority,
theadmission
easier thecontrol
frequency
set
of the
is
switched off.
parameters
based on the Basic
Priority. Different requirements
make different configurations of
the parameters. And different cell
This
parameter
indicates
can use
this parameter
tothe
index
Scheduling
Priority configuration
different configuration.
The set of
index.
Therecorresponding
are several different
parameters
to this
sets
theBasic
indexofisconfiguration
mapped fromofthe
Scheduling
Priority configured in
Priority.
This
parameter
the DN
different
sets of indicates
the configuration
(Distinguished
Name)
refers
to
separately.
the application priority profile.
Load control priority of different
cell can refer to different
application priority profile.
congestion control priority index
from application priority
This
configuration.
maximal allowed Non-VIP CS
user number when VIP user
exists in the current cell. When
Non-VIP user number exceeds
This
parameterRNC
indicates
the
the threshold,
will prohibit
maximal
allowed
PS
user to access
theNon-VIP
cell of VIP
user
number
when
VIP
user
carrier and balance the users to
exists
in the
current cell. When
non-VIP
carriers.
Non-VIP user number exceeds
the threshold, RNC will prohibit
user to access the cell of VIP
carrier , and balance the users to
non-VIP carriers or trigger R99
This
parameter
indicate whether
congestion
strategy.
dual cell HSUPA is supported in
this cell.
This parameter indicates cell

switch of support the Eutran nbr
blacklist.
0: Available
Subchannels of
Cell Should be
Nonconsecutive
1: Available
Subchannels of
Cell can be
Consecutive
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
connection
management
0: Off
1: On
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..255
N/A
UTRAN Cell
Admission Control
N/A
N/A
UTRAN Cell
QoS Guarantee
N/A
N/A
UTRAN Cell
QoS Guarantee
N/A
N/A
UTRAN Cell
QoS Guarantee
N/A
N/A
UTRAN Cell
Load Balance
1..255
N/A
UTRAN Cell
Load Balance
1..255
N/A
UTRAN Cell
HSPA EVOLUTION
0: Not Supported
1: Supported
N/A
utranCell
Handover Control
0: Off
1: On
N/A
N/A

UMPOProfile. Each cell obtains
the HS-PDSCH Measurement
Power Offset according to the
profile DN indicated by this
parameter.
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
N/A
N/A

maximum number of HS-DSCH
users in the cell. It will be
UTRAN Cell
guaranteed by admission control
mechanism.
Admission
Control /HSDPA
Introduction
0..65535, step 1
N/A

maximum number of E-DCH
UTRAN Cell
mechanism.
Admission Control
0..65535, step 1
N/A
Cell Extended Info Configuration

Object ID, identifies an object
RNC
under its parent object uniquely.
Parameter
0..2147483647
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..59, step 1
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..59, step 1
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..100, step 1
N/A
UTRAN Cell
Intelligent Carrier
Power Control
1..65535, step 1
This parameter is an array with

three elements of hour, minute
and second, which indicates the
start time of the switching off
frequency period. From this time,
RNC start to judge whether the
cell fulfills the condition of
switching off the frequency. This
start time is usually in the night
because the number of UEs in
service is usually small at that
This
time.parameter is an array with
three elements of hour, minute
and second, which indicates the
end time of the switching off
frequency period. From this time,
RNC must stop to judge whether
to switch off the frequency. This
This
parameter
indicates
end time
is usually
in the the UE
number
threshold
of
morning, because theswitching
number off
of
frequency
intelligently
when
UEs in service will increase
multi-carrier
is time.
used. When the
usually at that
number of the UE in the cell is
less then this threshold, RNC
This
parameter
begins
to judge indicates
whether tothe
trigger
time
ofcell.
judgment during
switch off
the
switching off or switching on
frequency intelligently. When the
condition is satisfied during the
time period of FreClsOpnTrigTm,
the cell will be switched off or on.

algorithm used to switch on the
frequency intelligently. 0: based
on the time to switch on
frequency; 1: based on whether
the working cell is congestion to
switch on frequency; 2: based on
This
parameter
thecell
time or
whether indicates
the working
algorithm
usedtotoswitch
switchonoff the
is congestion
frequency
frequency. intelligently. 0: based
This
parameter
indicates
on the
user number
on the
time
interval state
for switching
CELL_DCH
to switchoffoffthe
frequency
afteron
switching
frequency;again
1: based
the cell
on
it.
If
RNC
switches
on a
load to switch off frequency.
frequency, it can not switch off
the frequency until the timer
indicated by this parameter
elaspses.In this way, RNC can
avoid switching on and switching
off
a parameter
frequency frequently.
3:
This
indicates the
base
on
time
or
cell
load
to
switch
allowedoninfrequency.
serving cell for an RT
PS domain RAB.
allowed in serving cell for an RT
PS domain RAB.
0: Based on the
Time to Open
Frequency
1: Based on
Whether the
Working Cell is
Congested
2: Based on Time
or
Whether
0: Based
onthe
the
Working
Cell
User Numberison
Congested
CELL_DCH State
3:
Based on
to Switch
OffTime
or Cell Load to
Frequency
Switch
Onon the
1: Based
Frequency
Cell Load to
Switch Off
Frequency
0.1..24, step 0.1
UTRAN Cell
Intelligent Carrier
Power Control
UTRAN Cell
Intelligent Carrier
Power Control
UTRAN Cell
Intelligent Carrier
Power Control
UTRAN Cell
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384
UTRAN Cell
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,

kbps
144, 256, 384

NRT PS domain RAB.
UTRAN Cell
Dynamic Radio
Bearer Control
/Handover Control

maximum bit rate on E-DCH
allowed in serving cell for an RT
PS domain RAB.
UTRAN Cell
Dynamic Radio
Bearer Control
/Handover Control
Specifies the switch for the DL

Utran Cell
Controlled MBR testing function.
Dynamic Radio
Bearer Control
Specifies the MBR value in the

DL Controlled MBR testing
function .
Utran Cell
Dynamic Radio
Bearer Control
Specifies the switch for the UL

Utran Cell
Controlled MBR testing function.
Dynamic Radio
Bearer Control
This
parameter
indicates
thethe
Specifies
the MBR
value in
switch
of the Cell
Restriction.
UL Controlled
MBR
testing If
Utran Cell
this
parameter
is "Switch Off Cell
function
.
Restriction by OMCR" , the cell
switches off the cell restriction
function. If this parameter is
"Switch On Cell Restriction by
UTRAN Cell
OMCR" , the cell switches on the
cell restriction function. If this
parameter is "RNC Controls
Dynamically Cell Restriction" ,
the cell dynamically opens or
closes the cell restriction
according to the load of uplink.
Dynamic Radio
Bearer Control
Connection
management
8, 16, 32, 64, 128,

144, 256, 384,
512, 711, 1024,
1399, 1448, 2048,
2886, 3072, 4096,
5760,
11520
8, 16, 32,
64, 128,
144, 256, 384,
512, 711, 1024,
1399, 1448, 2048,
2886, 3072, 4096,
5760, 11520
0 Off
1 Replaced Mode
2
Mode
8,Minimum
16, 32, 64,
128,
3
Maximum
Mode
144, 256, 384,
512, 768, 900,
1024, 1200, 1800,
2048, 3650, 4096,
6144, 7200, 8192,
8640, 10100,
14000, 17600,
21096,
0 Off 23370,
27952,
35280,
1 Replaced
Mode
42192
2 Minimum Mode
3 Maximum Mode
N/A
N/A
hours
kbps
kbps
N/A
kbps
N/A
8, 16, 32, 64, 128,

144, 256, 384,
512, 711, 1024,
kbps
1399,
1448,
0: Switch
On2048,
Cell
2886, 3072,by4096,
Restriction
5760,
OMCR11520
1: Switch On Cell
Restriction by
N/A
OMCR
2: RNC Controls
Dynamically Cell
Restriction

whether Cell Restriction operates
in the method of "Polling" . If this
parameter is set to "Polling" , the
cell periodically performs AC
(Access Class) restriction. If the
parameter is set to "Not Polling" ,
the cell performs AC restriction
This
parameter
thein the
according
to theindicates
AC barred
number
OMCR. of Barred AC (Access
Class) in one polling period when
cell restriction operates in the
method
of "Polling"
.
This parameter
indicates
the
polling period when the CS/PS
domain DSAR (Domain Specific
Access Restriction) or cell
This
parameter
indicates
restriction
operate
in the method
whether
service
is
of "Polling"
. Thehandover
unit of this
allowed
or
not.
When
the
parameter is "s" .
"service handover" IE is included
in RAB assignment request. If
the switch is "On", RNC will
perform related process
This
parameter
according
to theindicates
value of "service
whether
absolute
priorityRNC will
handover"
IE, otherwise
Reselection
criteriahandover"IE.
is used. If
ignore the "service
AbsPriReselSwch sets as "On" ,
RNC will broadcast SIB19,
otherwise, SIB19 will not be
broadcasted.
This parameter indicates how to
perform neighbor measurement
if a cell has both inter-frequency
and inter-RAT cells as its
neighbors.
0: Not Polling
1: Polling
N/A
Connection
management
1..10 , step 1
N/A
UTRAN Cell
Connection
management
1..65535, step 1
UTRAN Cell
Handover Control
0: Off
1: On
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
handover control
UTRAN Cell
Connection
management
UTRAN Cell
The transport band width

allocated for Downlink Enhanced UTRAN Cell
CELL_FACH.
HSPA evolution
This Parameter Presents

Whether E-FACH DRX is
Supported in Cell.
HSPA Evolution
UTRAN Cell

inter-RAT will be chosen in
UTRAN Cell
priority for handover in multi-RAT
scenario.
whether RNC handle the adding
new radio link in soft handover,
when the signal quality of new
UTRAN Cell
radio link is lower than
EcN0ThrAddNRLSHO or
RSCPThrAddNRLSHO.
Handover Control
Handover Control
0: Off
N/A
0:
1: Turn
On off Interfrequency and
Inter-RAT
Handover
1: Only Inter
N/A
Frequency
2: Only Inter RAT
3: Inter Frequency
Is Prior to Inter
RAT
0..8000, Step 1
Kbps
0: Not Supported
1: Supported
0: GSM/GERAN
prefer
1: EUTRAN FDD
prefer
0: Off
1: On
N/A
N/A
N/A
UTRAN Cell

0..255
use
N/A
UTRAN Cell

0..255
use
N/A
UTRAN Cell

0..255
use
N/A
UTRAN Cell

0..255
use
N/A
UTRAN Cell

0..255
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..65535
use
N/A
UTRAN Cell

0..4294967296
use
N/A
UTRAN Cell

0..4294967296
use
N/A
UTRAN Cell

0..4294967296
use
N/A
UTRAN Cell

0..4294967296
use
N/A

0..4294967296
use
N/A
Power Control
2..200, step 1
frames
Power Control
-50..50, step 0.1
dB
Power Control
-50..50, step 0.1
dB
Power Control
-50..50, step 0.1
dB
Power Control
-50..50, step 0.1
dB
Power Control
-50..50, step 0.1
dB

Cell
Reserved
Parameter
20outer UTRAN Cell
shield
period used
in uplink
loop power control algorithm. For
the threshold algorithm, after
uplink SIR target is increased,
because of the existence of
round-trip time, the effect of the UTRAN Cell
adjustment can not be shown
before a period of time. So a
shield period is set, that is to say
This
parameter
power
during
this shieldindicates
period, the
offset
for error
downlink
DPCH
initial
received
transport
blocks
UTRAN Cell
power
when RAB or
will notcalculation
be handled.
SRB setup.
This parameter indicates power
offset for downlink DPCH initial
power calculation when soft or
softer handover.
UTRAN Cell

UTRAN Cell
power calculation when RAB
hard handover.
power calculation when SRB
UTRAN Cell
hard handover. This parameter
also is used to calculate F-DPCH
initial power when F-DPCH hard
handover.
UTRAN Cell
power calculation when RAB reestablishment.

whether uplink access control is
supported for the cell.
UTRAN Cell
Admission Control
0: Off
1: On
N/A

whether downlink access control UTRAN Cell
is supported for the cell.
Admission Control
0: Off
1: On
N/A
UTRAN Cell
Admission Control
0: Off
1: On
N/A
UTRAN Cell
Admission Control
46..158, step 1
dB
UTRAN Cell
Admission Control
0..255
N/A
UTRAN Cell
Admission Control
0: Off
1: On
N/A
UTRAN Cell
Admission Control
-112..-50, step 0.1 dBm
UTRAN Cell
Admission Control
0..255, step 1
N/A
UTRAN Cell
Admission Control
0: 4
1: 8
2: 16
3: 32
4: 64
5: 128
6: 256
7: 512
N/A
UTRAN Cell
Power Control
0..7, step 1
frames
UTRAN Cell
Power Control
0..7, step 1
frames
Utran Cell
HSUPA Introduction
0: Not Supported
1: Supported
N/A

whether HSDPA Throughput
based CAC is open or closed for
This
the cell.
maximum Users Number of the
RRC
Signalling indicates
only in the
This parameter
CELL_DCH
state
the
nominal path loss.Co-Existin
It is used to
Cell
andthe
thepower
valueincreasement
of 255 means
predict
the
function
is off.service
If the new
of new
downlink
request
"RRC
request"
setup on
in call setup
admission
control.
CELL_DCH state and the value
of this parameter is not equal to
255, the following judgment will
be done: If the new "RRC setup
request"
setup on
CELL_DCH
This
parameter
indicates
the
state
willbackground
lead the number
original
noise,of
which
signalling
users
exceed thisof
is the default
configuration
This
parameter
indicates
threshold,
this
new
"RRCcell
setup
background
noise
when
is
whether
noise on
request" background
will not be accepted
setup.
adjustment
isstate,
supported.
CELL_DCH
will
This
parameter
willand
takeit effect
attempt
FACH;
else, this new
when
theoncell
is setup;
"RRC
setup request"
caneffect
be
This parameter
will take
setup
on
CELL_DCH
state
when the "Background Noise
Automatic Adjustment Switch" is
changed from " Off" to "On" if the
cell is already setup;
This parameter will take effect
This
indicates
the
This
parameter
indicates
the
whenparameter
the "Background
Noise
reference
layer,ofwhich
means
maximum
number
Users
canis
Automatic SF
Adjustment
Switch"
the
reserved
codes
for
the
is
be
carriedfrom
on Downlink
changed
"On" to "Off"cell
if the
for
the
service
corresponding
to
Enhanced
CELL_FACH
cell is already
setup.
the reference SF layer. This
parameter is used in the
admission control algorithm
This
parameter
indicates
the
based
on code tree
reserved
DPCH
preamble
ratio, inpower
order control
to reserve
some
length.
Forusers
uplink
codes for
ofDPCH,
certain power
service
control
preamble
should
type. Another parameter be
used in
transmitted
before
this algorithm
is theDPDCH
Code Tree
transmission.
When
Reserved Ratio,
frompower
which the
control
preamble
is beingof the
reserved
codes number
transmitted,
control
reference SFinner
layerpower
is calculated.
This
parameter
is in effect
so asindicates
to ensurethe
the
SRB
delay. When
DPDCH is
requirement
of DPDCH
being
transmitted,
transmission
powerUE
to shall
be not
send
any
data
on
signalling
radio
satisfied.
bearers RB0 to RB4 during the
number of frames indicated by
this parameter.
whether UL16QAM is supported
in the cell.
This parameter is relative to the

cell maximal transmit carrier
power and is used to decide the
initial AMR data rate. When the
cell effective downlink load is
largerparameter
than this threshold,
thethe
This
is relative to
new
AMR will
benoise
setupand
withisthe
cell uplink
base
discounting
datathe
rate.
used
to decide
Initial AMR
This parameter
indicates
the
data
rate.
When
the
cell effective
number of user with compressed
uplink
load is larger
than this
mode activation
for balance
threshold,
the new
AMR will be
strategy
based
on measurement.
setup
discounting
When with
userthe
accesses
and data
rate.
condition of measurement
balance is fulfilled , If current
user number in compressed
modeparameter
is not lessindicates
than thisthe PThis
parameter,
compressed
CPICH power
down stepmode
size
will
not
activated,
otherwise,
used
to be
switch
off frequency
compressed
mode
intelligently. In
orderwill
to be
protect
activated
after
rab
assignment
UEs from being dropped
procedure.
because
of fast indicates
decrease the
of PThis
parameter
CPICH
power,
this step
can not
time interval
between
two
be
too big. of P-CPICH power
downgrade
used to switch off frequency
intelligently. This time must be
big enough
to complete
This
parameter
indicatesthe
thecell
reconfiguration
and handover
UE
times of downgrade
of P-CPICH
to
other
cell.
power with equal step used to
switch off frequency intelligently.
After PcpiPwrDnStepTm times
step down of P-CPICH power,
the
will beindicates
decreased
Thispower
parameter
theto
bottom
immediately
.
default
Ec/No. Itofis used
Usually,CPICH
the bandwidth
to
predict
the
power
Common Channel ( CCH ) is set
increasement
of new
as the maximum
valuedownlink
that it
service
request
callofadmission
may
use,
but in in
most
time, a
control.
lesser value should be OK.
Especially in the bandwidthlacking environment, such as an
E1 which is required to support 6
or more cells, a CCH configured
with
maximumindicates
value is not
a
This aparameter
when
good
option.
The
bandwidth
of
SIB11/11bis/12 are deferred
CCH
canthe
be intra-frequency
adjusted by
reading,
parameter
CCH
reporting quantitybandwidth
for RACHCAC
factor.
report in RRC connection
request message.
whether UE performs FDD interfrequency measurement in
CELL_FACH state.
whether UE performs inter-RAT
measurement in CELL_FACH
state.
UTRAN Cell
AMR-NB & AMRWB
1..100, step 1
UTRAN Cell
AMR-NB & AMRWB
0..62, step 0.1
dB
UTRAN Cell
Load Balance
0..255, step 1
N/A
UTRAN Cell
Node B
Management
0..10, step 0.1
dB
UTRAN Cell
Node B
Management
0..1000, Step 1
100ms
UTRAN Cell
Node B
Management
0..50, step 1
N/A
UTRAN Cell
Admission Control
-24..0, step 0.5
dB
UtranCell
Idle Mode and

Common Channel
Behavior
1..100, Step 1
UTRAN Cell
connection
management
0: CPICH Ec/No
1: CPICH RSCP
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
Intelligent Carrier
Power Control
1..100, Step 1
This parameter indicates the DL

power margin which should be
UTRAN Cell
considered when the neighboring
cell does the switch off judgment.
This parameter indicates the UL

interference margin which should
be considered when the
UTRAN Cell
neighboring cell does the switch
off judgment.
Intelligent Carrier
Power Control
0..62 , step 0.1
dB
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..65535
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..65535
N/A

power margin which should be
UTRAN Cell
Intelligent Carrier
Power Control
1..100, Step 1
This parameter indicates the UL

interference margin which should
be considered when the
UTRAN Cell
neighboring cell does the switch
off judgment.
Intelligent Carrier
Power Control
0..62 , step 0.1
dB
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..512
N/A
UTRAN Cell
Intelligent Carrier
Power Control
0..65535
N/A

code margin which should be
This
parameter
indicates
the UL
cell does
the switch
off judgment.
CE margin which should be
This margin is the value which is
normalized
to the
CE number
This parameter
indicates
the DL
consumed
by
SF128
to against
CE margin which should
be
the
cost lawwhen
difference
between
considered
the neighboring
cells.
normalized to the CE number
consumed by SF128 to against
the
law difference
between
Thiscost
parameter
indicates
the
cells.
HSDPA user number margin
which should be considered
when the neighboring cell does
the switch off judgment.
HSUPA user number margin
the switch off judgment.

code margin which should be
This
parameter
indicates
the UL
cell does
the switch
on judgment.
CE margin which should be
cell does the switch on judgment.
normalized
to the
CE number
This parameter
indicates
the DL
consumed
by
SF128
to against
CE margin which should
be
the
cost lawwhen
difference
between
considered
the neighboring
cells.does the switch on judgment.
cell
normalized to the CE number
consumed by SF128 to against
the
law difference
between
Thiscost
parameter
indicates
the
cells. user number margin
HSDPA
the switch on judgment.

HSUPA user number margin
the switch on judgment.
UTRAN Cell
Intelligent Carrier
Power Control
0..65535
N/A

weather the frequency close is
allowed or not.
UTRAN Cell
Intelligent Carrier
Power Control
0: Not Allowed
1: Allowed
N/A

CE is evaluated during the
UTRAN Cell
judgment of the cell load based
frequency switch off intelligently.
Intelligent Carrier
Power Control
0: Evaluated
1: Not evaluated
N/A

whether the S-CPICH
UTRAN Cell
deactivation is supported or not.
HSPA Evolution
0: Not Supported
1: Supported
N/A

threshold of MIMO user number
to deactivate the S-CPICH.
UTRAN Cell
HSPA Evolution
0..10, Step 1
N/A

threshold of MIMO user number
to activate the S-CPICH.
UTRAN Cell
HSPA Evolution
1..65535, Step 1
N/A
HSPA Evolution
1..65535 , Step 1
Power Control
1..100, step 1
Connection
Management
0..32
N/A
Connection
Management
0..32
N/A
Handover Control
0: Off
1: On
N/A
RAN Sharing
/Admission Control / 0: Off
Overload Control/
1: On
Congestion Control
N/A
This parameter
parameter indicates
indicates the
the
This
trigger
time to activate
or
UTRAN Cell
safe threshold
of transmitted
deactivate
S-CPICH.
carrier power for Node B to use.
When Node B schedules HSDPA
data according to scheduling
algorithm the transmitted carrier
power can not exceed this
UTRAN Cell
threshold. When the HSPA total
downlink power is allocated used
the method of "RNC dynamic
assigning
mode",
this parameter
This parameter
indicates
the
is
the threshold
forofdecreasing
minimum
number
interUtranCell
HSPA
totalneighbour
power. cell in SIB
frequency

minimum number of GSM
neighbour cell in SIB
UtranCell

whether 1a/1c/1d for CS will be
UTRAN Cell
handled via IUR.
switch for setting R99 power
ratio for different PLMN when
carrier sharing. When this switch
UTRAN Cell
is on, and power congestion
happen, the R99 power ratio for
different PLMN need to be
satisfied.

switch for limiting the maximum
R99 power when HSDPA user
exists. When this switch is on,
and there are HSDPA users in
the cell, it needs to the best
effort to avoid the R99 power
This
parameter
indicates
the
exceed
the maximum
power
offset
of
the
threshold
stop
R99
threshold (1- MinHspaPwrRto).
load decreasing relative to the
R99 maximum power (1MinHspaPwrRto) when HSDPA
user exists.
This parameter is the switch of
PLMN Code Sharing
This parameter indicate the
power offset between the initial
DPCCH power level on
secondary UL frequency when it
is activated and the current
DPCCH power level on primary
This
UL frequency.
Reserved Bit Rate for single I&B
Scheduling E-DCH Traffic, which
is used in Uplink admission
control for I&B Scheduling EDCH Traffic
Button of Upating SIB
completely.If the value of the
parameter is modified, RNC will
update all SIB completely.
The
parameter
Switch
Interval
betweenindicates
reception
of
of
SIB
Scheduling
Optimization.If
periodical reports and triggering
the
value
of the parameter
is 1
of the
inter-frequency
or inter-rat
(Open),
RNC
will
use
MIB
to
handover. Only the neighboring
schedule
all SIB
when itquality
is
cell
in which
the signal
is
possible..
above a certain threshold in all
periodic reports during a time
equal to this parameter can be
selected
as the target
cellthe
for the
This parameter
indicates
inter-frequency
inter-rat CS
maximal
allowedorNon-VIP
handover.
If this
parameter
is set
user number
when
current cell
is
to
a
greater
value,
the
probability
the neighboring of VIP cells and
of
decision
becomes
VIPincorrect
user dose
not exist
in the
low;
however,
the
handover
current
cell.
When
Non-VIP
This
parameter
indicates
theuser
algorithm
becomes
in
number exceeds
theslow
threshold,
maximal
allowed
Non-VIP
PS
responding
to signal
change.
RNC
will prohibit
user
to access
user number
when
current
cell is
the
cell. of VIP cells and
the current
neighboring
VIP user dose not exist in the
current cell. When Non-VIP user
number exceeds the threshold,
RNC
will prohibitindicates
user to access
This parameter
the
the
current
cell.
threshold of low HSDPA user
number level. When the HSDPA
user number is smaller than this
threshold, it is in low HSDPA
user
number level.
This parameter
indicates the
threshold of high HSDPA user
number level. When the HSDPA
user number is no smaller than
this threshold, it is in high
HSDPA user number level.
UTRAN Cell
Overload Control/
0: Off
Congestion Control 1: On
N/A
UTRAN Cell
Overload Control
UTRAN Cell
RAN Sharing
0: Off
/Congestion Control 1: On
N/A
UTRAN Cell
HSPA EVOLUTION 0..7, step 1
dB
UTRAN Cell

0..255, Step 1
use
kbps
CELL
NodeB
Management
0: Reset
1: Set
N/A
CELL
NodeB
Management
0: Off
1: On
N/A
UTRAN Cell
Handover Control
0..255, Step 1
UTRAN Cell
N/A
UTRAN Cell
N/A
UTRAN Cell
Power Control
0..65535
N/A
UTRAN Cell
Power Control
0..65535
N/A
1..100, step 1
This parameter is used to decide

the initial AMR data rate. When
the UE reported best cell CPICH
Ec/No is smaller or equal to the
threshold, the newly admitted
AMR servcies will be setup with
lower initial data rate.
This parameter is used to decide
whether UE is in bad coverage
This
is the
a switch
to
area parameter
according to
reported
indicate
whether
transferring
to
CPICH RSCP value.
URA_PCH/CELL_PCH is
supported or not in the cell. If the
value is 'On', allows UE to
transfer to URA_PCH when
there is no data to transmit in the
cell. If the value is 'Off', UE is not
allowed to transfer to URA_PCH
when
there is noindicates
data to transmit
This parameter
in the cell.
whether
SIB18 is broadcast in
the cell
switch of the uplink channel
allocation strategy for bad
coverage.If the parameter is
"On", when PS services is setup
on cell_DCH state, its uplink will
be setup on DCH but not E-DCH.
This parameter indicates the PCPICH Ec/No threshold for bad
E-DCH coverage.
This
This parameter
parameter indicates
indicates switch
the Pof
the HS-DSCH/E-DCH
to HSCPICH
RSCP threshold for
bad
DSCH/DCH
channel switching
E-DCH coverage.
triggered by UE transmitted
power and throughput.If the
parameter is "On", when the
system receives consecutive
EToD4BtimesThr throughput
measurement reports (Event 4B)
This
parameter
indicates
the
on the
E-DCH from
the user
function
switch
for6A
load
based
plane, and
Event
is reported
BLER.
is on,
by UE, When
the UEthe
willswitch
be switched
services
have different target
form HS-DSCH/E-DCH
to HSBLER
in different cell load level,
DSCH/DCH.
it means have different power
This
parameter
indicates the
control
parameters.
default load level. When the
function switch for load based
BLER is off, get the power
control parameters based on this
This
parameter
indicates the low
default
load level.
RoT level threshold. Where, RoT
= RTWP - Background Noise, it
This
parameter
indicates
the
indicates
the uplink
load. When
high
RoT
Where,
the cell
is level
in thethreshold.
low RoT state,
RoT
= RTWP
- Background
the RoT
is lower
than this
Noise,
it indicates the uplink
threshold.
load. When the cell is in the high
RoT state, the RoT is higher than
this threshold or equal to this
threshold. When the RoT is
lower than the high RoT level
threshold, but not lower than the
low RoT level threshold, the cell
is in medium RoT state.
UTRAN Cell
AMR-NB & AMRWB
-24..0, step 1
dB
UTRAN Cell
AMR-NB & AMRWB

/DRBC
-115..-26, step 1
dBm
CELL
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
Cell
Connection
Management
0: False
1: True
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
UTRAN Cell
Dynamic Radio
Bearer Control
-24..0, step 1
dB
UTRAN Cell
Dynamic Radio
Bearer Control
-115..-26, step 1
dBm
UTRAN Cell
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
UTRAN Cell
Power Control
0: Off
1: On
N/A
UTRAN Cell
Power Control
0: Low Load;
1: Medium Load;
2: High Load.
N/A
UTRAN Cell
Power Control
0..62, step 0.1
dB
UTRAN Cell
Power Control
0..62, step 0.1
dB

uplink low user number level
This
parameter
the
threshold.
Whenindicates
the cell is
in the
uplink
high
user
number
level
uplink low user number level, the
threshold.
When the
is in the
uplink equivalent
usercell
number
is
uplink
high this
userthreshold.
number level,
lower than
the equivalent user number is
higher than this threshold or
equal to this threshold. When the
This
parameter
equivalent
user indicates
number isthe
lower
downlink
low load
than the high
user level
number level
This
parameter
indicates
the the
threshold,
used
in lower
the load
threshold,
but not
than
downlink
high
load
level
based
power
control
parameter
low user number level threshold,
threshold,
used
in the
load
function.
the
cell
is in
the cell isWhen
in
medium
user
based
power
control
parameter
downlink
low load state, the
number level.
function.
theload
cell is
is lower
in
downlink When
effective
downlink
high load state,
the
than this threshold,
and the
downlink
effective
load is higher
configured
power control
than
this threshold
or equal
to
parameter
can supply
high QoS.
this threshold, and the
configured power control
parameter can supply low QoS.
When the downlink effective load
is
lowerofthan
downlink high
Switch
TCPthe
optimization
for
load
threshold,
and not
userslevel
setting
up a new
lower
than the
downlink
low load
connection
in the
cell.
When
CS service
released
level threshold,
theiscell
is in for
Multi-RAB
with CSFB
downlink medium
loadfrom
state.
Eutran, the parameter indicates
whether Eutran compressed
mode and measurement are
initiized for PS service to provide
servie fast return to Eutran as
soon as possible or redirection to
Eutran without measurement.
Logic Cell Configuration Object
ID
UTRAN Cell
Power Control
0..65535
N/A
UTRAN Cell
Power Control
0..65535
N/A
UTRAN Cell
Power Control
0..100, step 1
UTRAN Cell
Power Control
0..100, step 1
UTRAN Cell
Intelligent TCP
0: Off
Traffic Management 1: On
N/A
UTRAN Cell
Handover Control
0: Off
1: Handover
Judgement Based
on Measurement N/A
2: Redirection
without
Measurement
RNC
Parameter
0..999999999999
N/A

UTRAN Cell
the PLMN is the common PLMN
and PLMN
of the cell.
RAN Sharing
0: False
1: True
N/A

reference to UUtranCellFDD
object.
RNC
Parameter
N/A
N/A
The parameter is CS domain

specific access class N barred
indicator (N=0..15)
UTRAN Cell
and PLMN
Domain Specific
Access Restriction
0: Barred
1: Not Barred
N/A
The parameter is PS domain

specific access class N barred
indicator (N=0..9)
UTRAN Cell
and PLMN
Domain Specific
Access Restriction
0: Barred
1: Not Barred
N/A

access percent of the PLMN for
non-supporting UEs in a MOCN
shared network configuration
UTRAN Cell
and PLMN
RAN Sharing
0..100, Step: 1
Specific Access Restriction) in

CS domain of each PLMN of
current cell. If this parameter is
set
"Switch Off
CS Domain
Thistoparameter
indicates
the
DSAR
by
OMCR"
, the DSAR is
switch of DSAR (Domain
not
supported
in Restriction)
CS domain in
of
Specific
Access
the domain
PLMN. Ifofiteach
is "Switch
PS
PLMNOn
of CS
Domain
DSAR
by OMCR"
, the
current cell.
If this
parameter
is
DSAR
is
supported
in
CS
set to "Switch Off PS Domain
domain
ofOMCR"
the PLMN.
it is is
DSAR by
, theIf DSAR
"Switch
On
and
Switch
Off
not supported in PS domainCS
of
Domain
DSAR
Dynamically
This
parameter
indicates
the PLMN.
If it is
"Switch Onby
PS
RNC" , the
cell by
dynamically
whether
Paging
and
Domain
DSAR
OMCR" , starts
the
or
stops
DSAR in
Restriction
DSAR
is the
supported
in CS
PS domain
domain
of
the
PLMN
according
to CS
is
opened
or
closed
when
the
of the PLMN. If it is "Switch
On
domain
Load
of
Iu
or
DSAR
(Domain
Specific
Access
and Switch Off PS Domain
accessibility
ofthe
Iu PLMN
Restriction)
of
is ,
DSAR Dynamically
by RNC"
This
parameter
indicates
opened.
If
the
switch
is
opened,
the cell dynamically starts or
whether
the
DSAR
(Domain
this
cell
some
UEs from
stops
therestricts
DSAR
in PS
domain
of
Specific
Access
Restriction)
responding
to pagingto
message
the PLMN according
PS of
CS
domain
operates
and
initiating
the
domain
Load
of Iu or in the
method
of
"Polling"
the
accessibility of Iu . Ifinthis
parameter
is setwhen
to "Polling"
, the
CS/PS
domain
the PLMN
This
parameter
indicates
cell
AC
has periodically
opened
the performs
CS/PS
domain
whether
the DSAR
(Domain
(Access
Class) restriction
in of
CS
DSAR. Access
Specific
Restriction)
domain
of
this
PLMN.
If
the
PS domain operates in the
parameter
is set to "Not
Polling" ,
method of "Polling"
. If this
the
cell
performs
AC
restriction
parameter is set to "Polling" , the
according
to theperforms
AC barred
cell periodically
ACin the
OMCR.
(Access Class) restriction in PS
domain of this PLMN. If the
parameter
is setindicates
to "Not Polling"
,
This parameter
the
the
cell
performs
AC
restriction
number of Barred AC in one
according
to the
AC CS
barred
in the
polling period
when
domain
OMCR.
DSAR of each PLMN operates in
the method of "Polling" .
number of Barred AC in one
polling period when PS domain
DSAR of each PLMN operates in
the method of "Polling" .
R99 power ratio for different
PLMN when carrier sharing. The
summation of the R99 power
ratios for all PLMN is 100%.
UTRAN Cell
and PLMN
Connection
Management
UTRAN Cell
and PLMN
Connection
Management
UTRAN Cell
and PLMN
Connection
Management
UTRAN Cell
and PLMN
Connection
Management
UTRAN Cell
and PLMN
Connection
Management
UTRAN Cell
and PLMN
Domain DSAR by
OMCR
1: Switch On CS
Domain DSAR by
OMCR
0: Switch Off PS
2:
RNC Controls
Domain
DSAR by
Dynamically CS
OMCR
Domain
1: SwitchDSAR
On PS
According
to by
Domain DSAR
Accessibility
of Iu
OMCR
3:
RNC
Controls
2: RNC Controls
Dynamically
0:
Allow UEs CS
to
Dynamically
PS
Domain DSAR
DSAR
Respond
to
Domain
According
to
Paging
Message
According
to Load
of
Iu
or
and
Initiate
Accessibilitythe
of Iu
Accessibility
of Iu
Location/Registrati
3: RNC Controls
on
Dynamically PS
1:
Restrict
UEs
Domain
DSAR
from
Responding
According
to Load
to
of Paging
Iu or
Message
andof Iu
Accessibility
Initiating the
0:
Not Polling
Location/Registrati
1:
onPolling
N/A
N/A
N/A
N/A
0: Not Polling
1: Polling
N/A
Connection
management
1..10, step 1
N/A
UTRAN Cell
and PLMN
Connection
Management
1..10, step 1
N/A
UTRAN Cell
RAN Sharing
/Admission Control /
0..100, step 0.1
Overload Control/
Congestion Control

DPCH code ratio of PLMN in the UTRAN Cell
RAN sharing
RAN Sharing
0..100, step 0.1
/Congestion Control

RNC
Parameter
0..999999999999
N/A

reference
RNC
toUExternalUtranCellFDD object.
Parameter
N/A
N/A

object.
Parameter
N/A
N/A
RNC

UTRAN
neighboring relationship of the
Neighboring
serving cell and neighboring cell. Cell
This
This parameter
parameter indicates
indicates the
the
measurement
priority of the
status
of the neighboring
cell.
neighboring
highest
When SIB11cell.
is toThe
be sent,
the
priority
is
0,
the
lowest
cells that support "cell priority is
2.
selection/reselection" are
selected from the neighboring
cells list and are filled in SIB11;
When SIB12 is to be sent, SIB12
is filled as same as SIB11;
When the measurement control
message is to be sent, the cells
that
"handover"
This support
parameter
indicatesare
selected the
from
thewill
neighboring
whether
cell
be broadcast
cells
list and
are filled in the
in SIB11
or SIB11bis.
measurement control message.
effective time of the neighboring
cell temporary offset. The cell
belongs to the HCS structure.
This parameter is required when
queue
the cells in
the cellthe
This
parameter
indicates
reselection
rule. This
parameter
temporary offset
for CPICH
is
broadcast
to
UE
in
SIB11.
RSCP. The cell belongs
to the
HCS structure. This parameter is
required when queue the cells in
This
parameter
indicates
the
the cell
reselection
rule. This
An
offset isoffset
fortoeach
temporary
of the
parameter
isallocated
broadcast
UE in
cell
being monitored.
The offset
neighboring
cell for CPICH
SIB11.
can
be The
positive
negative.
Ec/No.
cell or
belongs
to the
Before
the UE judges
whether an
HCS structure.
This parameter
is
event
occurs,
thethe
offset
required
whenadds
queue
cellstoin
the
If the
the measurement
cell reselectionresult.
rule. This
PCPICH
uses
a
positive
offset,
parameter is broadcast to UE in
the
UE sends the measurement
SIB11.
This
parameter
indicates
the
the PCPICH
uses
a negative
quality
offset
of the service
offset, the
PCPICH
report iscell
and
neighboring
the
limited.
When thecell
cellwhen
individual
measurement
is CPICH
offset is used, quantity
the corresponding
RSCP.
This parameter
cell is possibly
(at leastis
required
when
queues
cells
temporarily)
the indicates
target cell
ofinthe
This
parameter
the
the
cell
reselection
rule.
This
handover
or removed
from the
quality
offset
of the service
cell
parameter
to UE
active
set. is broadcast
and neighboring
cell when
thein
SIB11.
measurement
quantity is CPICH
Ec/No. This parameter is
required when queues cells in
the
cellcell
reselection
When
selectionrule.
and This
parameter
is
broadcast
to UE in
reselection is set to CPICH
SIB11. This parameter specifies
Ec/No,
the quality threshold levels for
cell reselection.This parameter is
broadcasted in SIB11.
UTRAN
Neighboring
Cell
UTRAN
Neighboring
Cell
0: Neighbor
1: Overlap
Handover Control /
2: Covers
Load Balance /HCS
3: Contained in
N/A
Idle Mode and

Common Channel
Behavior /Handover 0..2
N/A
Control / Admission
0: cell
Control
selection/reselecti
on only
1: handover only
Handover Control
N/A
2: cell
selection/reselecti
on and handover
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
0: SIB11
1: SIB11bis
N/A
UTRAN
Neighboring
Cell
Idle Mode and

Common channel
behavior/HCS
1: Not Used
2: Used
N/A
1: Not Used
2: 10
3: 20
4: 30
5: 40
0:
6: 3
50
1:
7: 6
60
2: 9
3: 12
4: 15
5: 2
18
0:
6:
1: 21
3
7:
2: inf
4
3: 6
4: 8
5: 10
6: 12
7: inf
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
UTRAN
Neighboring
Cell
Handover Control
-10..10, step 0.5
dB
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-50..50, Step 1
dB
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-50..50, Step 1
dB
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-24..0, step 0.5
dB
dB
dB
When cell selection and

RSCP, this parameter specifies
cell
reselection.This
parameter is
When
cell selection and
broadcasted
in
SIB11.
Ec/No, This parameter specifies
cell
reselection.This
parameter is
When
cell selection and
broadcasted
in
SIB12.
RSCP, This parameter specifies
This
parameter indicates
the is
cell reselection.This
parameter
quality
offset
of
the
service
cell
broadcasted in SIB12.
and neighboring cell for CPICH
RSCP. This parameter is
the cell
reselection
rule. This
This
parameter
indicates
the
parameter
is broadcast
to UE
quality offset
of the service
cellin
SIB12.
Ec/No. This parameter is
the cell
reselection
rule. This
This
parameter
indicates
the
parameter
is broadcast
to UE in
effective time
of the neighboring
SIB12.
This
parameter
indicates
queue
the cells in
the cellthe
temporary
of the
reselectionoffset
rule. This
parameter
neighboring
forin
CPICH
is broadcast cell
to UE
SIB12.
RSCP. The cell belongs to the
required
when queue
the the
cells in
This parameter
indicates
the
cell
reselection
rule.
This
temporary offset of the
parameter
broadcast
to UE in
neighboringiscell
for CPICH
SIB12.
Ec/No. The cell belongs to the
the cell reselection rule. This
SIB12.
This parameter indicates GSM
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-115..-26, Step 1
dBm
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-24..0, step 0.5
dB
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-115..-26, Step 1
dBm
UTRAN
Neighboring
Cell, GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-50..50, Step 1
dB
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-50..50, Step 1
dB
1: Not Used
2: 10
3: 20
4: 30
5: 40
0:
6: 3
50
1:
7: 6
60
2: 9
3: 12
4: 15
5: 2
18
0:
6:
1: 21
3
7:
2: inf
4
3: 6
4: 8
5: 10
6: 12
7: inf
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
UTRAN
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
RNC
Parameter
0..999999999999
N/A
RNC
Parameter
N/A
N/A

GSM
the neighboring GSM cell
Neighboring
belongs to the Self physical
Cell
RNC.
Parameter
0: False
1: True
N/A

neighboring relationship of the
serving cell and Gsm
neighboring cell.
Handover Control
/Load Balance
0: Neighbor
1: Overlap
2: Covers
3: Contained in
N/A

reference to UExternalGsmCell
object.
GSM
Neighboring
Cell
dB
dB
This
This parameter
parameter indicates
indicates the
the
status
of
the
GSM
neighboring
measurement priority
of the
cell.
neighboring cell. The highest
When
is to
be sent,
the is
prioritySIB11
is 0, the
lowest
priority
cells
2. that support "cell
selection/reselection" are
selected from the neighboring
cells list and are filled in SIB11;
When SIB12 is to be sent, SIB12
is filled as same as SIB11;
When the measurement control
message is to be sent, the cells
This
parameter
indicatesare
that support
"handover"
whether
cell
be broadcast
selected the
from
thewill
neighboring
in
SIB11
or
SIB11bis.
cells list and are filled in the
measurement control message.
quality offset of the service cell
and neighboring cell when the
required when queues cells in
the
cellcell
reselection
When
selectionrule.
and This
parameter
is
broadcast
to UE in
SIB11.
RSCP, this parameter specifies
This
parameter indicates
the
cell reselection.
This parameter
effective
time
of
the
neighboring
is broadcasted in SIB11.
queue
the cells in
the cellthe
This
parameter
indicates
reselection
rule. This
parameter
temporary offset
for CPICH
is
broadcast
to
UE
in
SIB11.
RSCP. The cell belongs
to the
the cell
reselection
rule. This
This
parameter
indicates
the
parameter
is broadcast
to UE
quality offset
of the service
cellin
SIB11.
In
the layered
cell structure,
parameter
is broadcast
to UEThis
in
parameter
indicates the quality
SIB12.
threshold level of the neighboring
cell when performing the cell
reselection for CPICH RSCP.
This
the to
This parameter
parameter indicates
is broadcast
effective
time
of
the
neighboring
UE in SIB12.
This
parameter
indicates
queue
the cells in
the cellthe
temporary
of the
reselectionoffset
rule. This
parameter
neighboring
forin
CPICH
is broadcast cell
to UE
SIB12.
RSCP. The cell belongs to the
SIB12.
GSM
Neighboring
Cell
GSM
Neighboring
Cell
GSM
Neighboring
Cell
Idle Mode and

Common Channel
0..2
N/A
Behavior /Handover
Control
0: cell
selection/reselecti
on only
1: handover only
Handover Control
N/A
2: cell
selection/reselecti
on and handover
Idle Mode and
Common Channel 0: SIB11
N/A
Behavior /Handover 1: SIB11bis
Control
GSM
Neighboring
Cell
Idle Mode and

Common Channel 1: Not Used
Behavior /Handover 2: Used
Control
N/A
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-50..50, Step 1
dB
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
-110..-37, Step 1
dBm
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
GSM
Neighboring
Cell
Idle Mode and

Common Channel
Behavior
1: Not Used
2: 10
3: 20
4: 30
5: 40
0:
6: 3
50
1:
7: 6
60
2: 9
3: 12
4: 15
5: 18
6: 21
7: inf
dB
-50..50, Step 1
dB
-110..-37, Step 1
dBm
1: Not Used
2: 10
3: 20
4: 30
5: 40
0:
6: 3
50
1:
7: 6
60
2: 9
3: 12
4: 15
5: 18
6: 21
7: inf
dB

Object ID.
RNC
Parameter
0..999999999999
N/A

reference to
RNC
UExternalEUtranCellTDD object.
Parameter
N/A
N/A

RNC
uniquely.
Parameter
N/A
N/A

ID of Cell Selection and
Reselection Information
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1: CPICH Ec/No
2: CPICH RSCP
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..20, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..20 , step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..91, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
This parameter
parameter is
indicates
This
a switchthe
measurement
quantity
for cell
indicating whether
Sintrasearch
selection
and
reselection.
is configured or not. If the value
is
False,
Sintrasearch
is not
This
parameter
indicates
the
configured
to
UE,
and
UE
performs the
intra-frequency
triggering
threshold
for cell
measurement
periodically. used
If the
reselection (Sintrasearch)
value
is
True,
Sintrasearch
is
by UE to judge whether intraconfigured
to
UE,
and
UE
judges
frequency measurement should
whether
to perform
the
intrabe performed.
When
HCS
is not
frequency
measurement.
For cell
used,parameter
if the quality
ofswitch
serving
This
is
a
which
details
please
refer to TS
exceeds
Sintrasearch,
UE may is
indicates
whether
Sintersearch
25.304.
choose
to not
perform
configured
or not.
If theintravalue is
frequency
measurement;
if the
False,
Sintersearch
is
not
This
parameter
indicates
thelarger
quality
of
serving
cell
is
not
configured
to UE,
and UE
inter-frequency
measurement
than
Sintrasearch
or if
performs
the
inter-frequency
triggering
threshold
for cell
Sintrasearch
isperiodically.
not configured,
measurement
If the
reselection
(Sintersearch)
used
UE
performs
intra-frequency
value
is
True,
Sintersearch
is
by
UE to judge For
whether
intermeasurement.
details
please
configured
to
UE,
and
UE
judges
frequency
measurement
should
refer
to TS
25.304. the interwhether
to perform
be performed.
When HCS is not
frequency
For cell
used, if themeasurement.
quality of serving
details
please
refer
TS
This
parameter
is a to
switch
which
exceeds
Sintersearch,
UE may
25.304.
indicates
SsearchHCS
choose towhether
not perform
interis
configured
or not. Whenif UE's
frequency
measurement;
the
serving
cell
belongs
if
quality
of servingindicates
celltoisHCS,
not
This
parameter
thelarger
the
quality
of
serving
cell
is
not
than Sintersearch
if HCS cell
triggering
thresholdorfor
larger
than SsearchHCS,
UE
Sintersearch
is not configured,
reselection
(SsearchHCS)
used
performs
intra-frequency
and
UE
performs
inter-frequency
by UE to judge whether intrainter-frequency
measurements;
measurement.
For
details pleaseif
frequency
and inter-frequency
SsearchHCS
is should
not configured,
refer to TS 25.304.
measurements
be
UE
always
performs
intraThis
parameter
is aUE's
switch
performed.
When
serving
frequency
and
indicating
whether
inter-RAT
cell belongs
to inter-frequency
HCS,
if the
measurement.
information
parameters
received level
of servingused
cell isfor
cell
reselection
are
configured
not larger than SsearchHCS oror
if
not.
If the value
is False,
interSsearchHCS
is not
configured,
RAT
information
parameters are
UE performs
measurements
on
not
configured to UE,
UE
all intra-frequency
andand
interperforms
inter-RATcell. For
frequencythe
neighboring
measurement
periodically.
details please refer
to TS If the
value
is
True,
inter-RAT
25.304.
information parameters are
configured to UE, and UE judges
whether to perform the inter-RAT
measurement. For details please
refer to TS 25.304.
inter-RAT measurement
triggering threshold for cell
reselection (Ssearch, RAT) used
by UE to judge whether interRAT measurement should be
performed. When HCS is not
used, if the quality of serving cell
exceeds
Ssearch,
RAT, UE
This parameter
indicates
themay
choose
to
not
perform
inter-RAT
inter-RAT
measurement
measurement;
if the
quality
ofcell
triggering
threshold
for
HCS
indicates whether
SHCS,
RAT
is
serving
cell
is
not
larger
than
reselection
(SHCS,
RAT)
used
configured or not. If SHCS, RAT
Ssearch,
RAT orwhether
ifUE
Ssearch,
by
UEconfigured,
to judge
inter-RAT
is not
performs
This
indicates
the
is notparameter
configured,
UE
performs
RAT
measurement
should
be
inter-RAT
measurement,
inter-RAT
measurement
measurement.
For
performed.
Assume
received
otherwise UE
judgesthe
whether
to
triggering
threshold
forSrxlev,
higherthe
details
refer
to
TS
level
ofplease
serving
cell is
performs
inter-RAT
HCS
priority
cellFor
reselection
25.304.
quality
of serving
cell
is Squal,
if
measurement.
details
please
(Slimit,
SearchRAT)
used
by
UE
Srxlev<=SHCS,
RAT
or
SHCS,
refer to TS 25.304.
to
judge
whether
inter-RAT
RAT
is not
configured,
UE
measurement
should
performs inter-RAT be
performed.
Assume
the received
measurement;
in case
level
of servingRAT
cell is
Srxlev>SHCS,
, ifSrxlev, the
quality
of serving
cell is Squal,
Squal>Slimit,
SearchRAT,
UE if
Srxlev<=SHCS,
or SHCS,
does not performRAT
inter-RAT
RAT
is not configured,
measurement,
if Squal UE
<=Slimit,
performs
inter-RAT
SearchRAT, performs inter-RAT
measurement;
in case
measurement on
the neighboring
Srxlev>SHCS,
, if higher
inter-RAT cells RAT
having
Squal>Slimit,
SearchRAT,
UE
HCS
priority.
For
details
This parameter indicatesplease
does
notTS
perform
inter-RAT will
refer to
25.304.
whether
the
Qrxlevmin-offset
measurement,
Squal <=Slimit,
be broadcast inifSIB3
SearchRAT, performs inter-RAT
Qqualmin-offset
used
for
measurement onisthe
neighboring
restricting
PLMN
ping-pong
inter-RAT cells having higher
reselection
cell selection
HCS priority.when
For details
please
and
In cell selection
referreselection.
to TS 25.304.
and reselection: Squal =
Qqualmeas (Qqualmin +
QqualminOffset)
whether the Qrxlevmin-offset will
be broadcast in SIB3
QrxlevminOffset is used for
restricting PLMN ping-pong
reselection when cell selection
and reselection. In cell selection
This
parameter indicates
and reselection:
Srxlev = the
hysteresis
value
for FDD cells
Qrxlevmeas (Qrxlevmin
+ in
case
the quality measure
for cell
QrxlevminOffset)
selection
and reselection
is set to
Pcompensation
This parameter
indicates the
CPICH RSCP
or (Qhyst)
Cpich EcNo.
hysteresis
value
when In
cell-ranking
criterion /URA_PCH,
R of cell
UE is in CELL_PCH
reselection,
the
R
value
of the
used for FDD cells in case
serving
cell
equals
to
the
quality measure for cell selection
measured
valueisplus
and
reselection
set the
to CPICH
This
parameter
indicates
the
hysteresis
value.
For
details
RSCP or Cpich
EcNo.
If this
hysteresis
value
(Qhyst)
when
please
refer
to
TS
25.304.
parameter
is not provided
in for
UE is in CELL_FACH,
used
SIB4,
Qhyst1s
shall
be
used.
FDD cells in case the quality In
cell-ranking
R of cell
measure forcriterion
cell selection
and
reselection,
the
R
value
of
servingorcell
equals
to the
RSCP
Cpich
EcNo.
If this
measured
the in
parameter value
is not plus
provided
hysteresis
value.
Forbe
details
This
indicates
the In
SIB4,parameter
Qhyst1s
shall
used.
please
refer
to
TS
25.304.
hysteresis
value
for
FDD
cell-ranking criterion R of cells
cell in
case
the
quality
measure
reselection, the R value offor cell
selection
and
reselection
serving cell
equals
to the is set to
CPICH
Ec/No.
cell-ranking
measured
valueInplus
the
criterion
R value.
of cell For
reselection,
hysteresis
details the
R
valuerefer
of serving
cell equals to
please
to TS 25.304.
the measured value plus
Qhyst2s. For details please refer
to TS 25.304.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..20 , step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..91, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..20, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
1..16, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
2..16, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 2
dB

hysteresis value (Qhyst) when
UE is in CELL_PCH /URA_PCH,
used for FDD cells in case the
quality measure for cell selection
and
is set to CPICH
This reselection
parameter indicates
the
Ec/No.
If
this
parameter
not
hysteresis value (Qhyst) is
when
provided
in
SIB4,
Qhyst2s
UE is in CELL_FACH, usedshall
for
be used.
criterion
FDD
cellsInincell-ranking
case the quality
R
of cell reselection,
the Rand
value
measure
for cell selection
of
serving
cell
equals
to
the
measured
value
plus theis not
Ec/No. If this
parameter
hysteresis
value.
details
provided in SIB4, For
Qhyst2s
shall
please
refer
to
TS
25.304.
be used.
In cell-ranking
This
parameter
indicatescriterion
the cell
R
of cell reselection,
theUE
R value
reselection
timer value.
shall
of
serving
cell
equals
to
the
reselect the new cell if the new
measured
value
plusthan
the the
cell
isparameter
better
ranked
This
indicates
the cell
hysteresis
value.
For
details
serving
cell timer
according
tothe
theUE
cellreselection
value
please
refer to TS
25.304.
ranking
during a time
shall
usecriterion
in RRCRconnected
interval
indicated
by
mode states
CELL_PCH
and
Treselections.
URA_PCH if provided in SIB4,
otherwise
Treselections
be
This parameter
indicatesshall
the cell
used.
UE
shall
reselect
the
new
reselection timer value the UE
cell if use
the in
new
cellconnected
is best ranked
shall
RRC
according
the cell-ranking
mode statetoCELL_FACH
if
criterion
time interval
providedRinduring
SIB4, a
otherwise
indicated
by the
cellbe
reselection
Treselections
shall
used. UE
timer
value.
shall reselect the new cell if the
new cell is best ranked according
to the cell-ranking criterion R
This
parameter
is a switch
which
during
a time interval
indicated
indicates
scaling
factor
by the cellwhether
reselection
timer
for
cell reselection timer in UE
value.
high
state
is configured
This mobility
parameter
indicates
the
or
not.
scaling factor of cell reselection
timer in UE's high mobility state.
For UE UE in high mobility state,
its cell reselection timer value
equals to Treselections or
Treselections,
PCH orin high
If UE is not detected
Treselections,
FACH
mobility state, the
cellmultiplexing
reselection
this
factor.
timer value for the interfrequency case is Treselections
or Treselections, PCH or
Treselections, FACH multiplexing
this factor.
scaling factor for cell reselection
timer for the inter-frequency
case.
If UE is not detected in high
mobility state, the cell reselection
timer value for the inter-RAT
case is Treselections or
Treselections, PCH or
Treselections, FACH multiplexing
this factor.
scaling factor for cell reselection
timer for the inter-frequency
case.
duration for evaluating allowed
amount of cell reselection (s) in
case of non-HCS usage.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..40, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..31, step 1
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..31, step 1
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..6.2, step 0.2
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..1, step 0.1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..4.75 , step 0.25 N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0: False
1: True
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..4.75, step 0.25
N/A
Idle Mode and

Common Channel
Behavior
1: Not Used
2: 30
3: 60
4: 120
5: 180
6: 240
UTRAN Cell
If UE is detected in high mobility

state, the cell reselection timer
value for the inter-RAT case is
Treselections or Treselections,
UTRAN Cell
PCH or Treselections, FACH
multiplexing this factor and
Speed dependent ScalingFactor
This
for Treselection.
additional time period before the
UE can revert to low-mobility
UTRAN Cell
measurements in case of nonHCS usage.
whether HCS serving cell
information is configured or not.
UTRAN Cell

period for evaluating allowed
amount of cell reselection (s) in
case of HCS usage.
UTRAN Cell

maximum number of cell
reselections in case of HCS
usage.
UTRAN Cell

additional time duration before
the UE transits from high-mobility
state to low-mobility state in case
of HCS usage.
This parameter is cell barred
indicator. If the cell barred
indicator is set to 'Barred', UEs
This
parameter
is to
intra-frequency
are not
permitted
select/recell
reselection
indicator.
select this cell, even for If cell is
barred
, if the
value of this
emergency
calls.
parameter is 'Allowed', UE is
allowed to select other intrafrequency cell in case it satisfies
the cell selection/relection
condition. If it is set 'Not Allowed',
when cell is barred, UE will not
select another intra-frequency
This
cell. parameter indicates the
barred
time of aisbarred
cell.
This parameter
cell reservation
extension indicator. If it is set
'reserved', if the value of Intrafrequency Cell Reselection
Indicator is 'not allowed', UEs
shall behave as if cell status
"barred" is indicated. And if cell
status status 'barred' is
indicated , the "Cell Reservation
This
parameter
is the access
Extension"
is invalid.
class barred indicator for
AC0~AC15.

Object ID.
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
1..16
0: Not Used
1: 10
2: 20
3: 30
4: 40
5: 50
6: 60
7: 70
0: False
1: True
N/A
N/A
Idle Mode and

Common Channel
Behavior
1: Not Used
2: 30
3: 60
4: 120
5: 180
6: 240
Idle Mode and

Common Channel
Behavior
1..16
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
RNC
Parameter
0: Not Used
1: 10
2: 20
3: 30
4: 40
5: 50
6: 60
7: 70
1: Barred
2: Not Barred
0: Allowed
0: 10
1: 20
2: 40
3: 80
4: 160
5: 320
6: 640
7: 1280
0: Reserved
1: Not Reserved
N/A
N/A
N/A
0: Barred
1: Not Barred
N/A
0..2147483647
N/A
HS-PDSCH number can be

adjusted to the parameter value
directly if the criteria to increase
the HS-PDSCH number are
satisfied. Minimum Number of
HS-PDSCH Number of HSPDSCH Maximum Number of
HS-PDSCH.
If HsVsR99CdPriInd is set to
"Supported"
andindicates
the number
This parameter
the of
HS-PDSCH
code
used
is
smaller
minimum number of the HSthan
the
threshold
for
code
PDSCHs configured in the cell.
fairness (NumofHspdsch
Minimum
Number of HS-PDSCH
related),
service is given
NumberHSDPA
of HS-PDSCH
the
high
priority
to
use
the code
Maximum
Number
of HSThis
parameter
indicates
the
resource
compared
with
R99
PDSCH.
maximum
number
of
the
HSservice.
PDSCHs configured in the cell.
Minimum Number of HS-PDSCH
Number of HS-PDSCH
Maximum Number of HSPDSCH.
number of the E-AGCHs of the
cell.

number of the E-RGCHs/ EHICHs of the cell.
UTRAN Cell
Code Resource
Allocation
1..15, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..15, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..15, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..32, step 1
N/A
UTRAN Cell
Code Resource
Allocation
/Admission Control
1..32, step 1
N/A
0: Not Sharing
1: Sharing
N/A

whether the HS-PDSCH code
UTRAN Cell
number is shared with other cells
of the same NodeB.
Code Resource
Allocation

number of HS-SCCHs
configured in the cell.
UTRAN Cell
Code Resource
Allocation
1..32, step 1
N/A
UTRAN Cell
Code Resource
Allocation
/Admission Control
1..65535, step 1
Kbps
UTRAN Cell
Power Control
1..100, step 1
UTRAN Cell
Power Control /
Congestion
Control /Admission
Control
1..100, step 1
UTRAN Cell
Power Control
1..100, step 1
UTRAN Cell
Overload Control
/HSUPA Packet
Scheduling
0..100, step 1

average data rate of one HSPDSCH channel.
initial value of the total
transmission power of HSPDSCH, HS-SCCH, E-AGCH, ERGCH and E-HICH codes, which
is a ratio
relativeindicates
to the maximum
The
parameter
the
DL
transmission
of the
minimum
value ofpower
the total
cell.
is a ratio
relativeindicates
to the maximum
The
parameter
the
DL
transmission
power
of the
maximum
value of
the total
cell.
is a ratio relative to the maximum
This
parameter indicates
DL transmission
power ofthe
the
threshold
of non-serving E-DCH
cell.
to total E-DCH power ratio. Node
B controls the non-service EDCH load not exceed this
threshlod through the HSUPA
scheduling mechanism.

maximum target UL interference
for a certain cell, including
received wide band power from
all sources, which is an offset
relative to the UL interference
when
there is noindicates
load in the
This parameter
thecell.
DN
This
parameter
is
used
by
(Distinguish Name) refer tothe
Node
scheduler.
Asresource
a result of
limitingB HSDPA
GBR
scheduling,
the
total
rising
consumption parameters profile.
RTWP
caused
by the uplink
Different
requirements
need
services configurations
should not exceed
this
different
of the
target
value. And corresponding
parameters.
This
parameter
is used in the
Consumption
parameters
of the
procedure
of
adjusting
the
cell can be indexed by this
number
of the HS-PDSCHs
parameter.
based on code occupation ratio
to reserve a certain number of
This
is used in the
codesparameter
for the DPCH.
procedure of adjusting the
number of the HS-PDSCHs
based on code occupation ratio
to judge whether the criteria of
This
parameter
indicates
decreasing
the HS-PDSCH
whether
to
drop
the DPCH or Fnumber is satisfied.
DPCH code of the link over Iur.
Release the DPCH or F-DPCH
code of the link over Iur when the
parameter is set to 'Off',
otherwise, do not re-assign the
code
This parameter is the E-AGCH
multiplexing switch in dedicated
E-DCH and common E-DCH.
UTRAN Cell
Admission
Control /Overload
Control /hsupa
packet schedule
0..62, step 0.1
dB
UTRAN Cell
Overload Control
N/A
N/A
UTRAN Cell
Code Resource
Allocation
0..512, step 1
N/A
UTRAN Cell
Code Resource
Allocation
0..512, step 1
N/A
UTRAN Cell
Code Resource
Allocation
0: Off
1: On
N/A
UTRAN Cell
Code Resource
Allocation
0: Off
1: On
N/A
UTRAN Cell
Admission Control
0..65535, step 1
N/A
Code Resource
Allocation
0: Not Supported
1: Supported
N/A
Admission Control
0..255
N/A
Code Resource
Allocation
0: Off
1: On
N/A
UTRAN Cell
Code Resource
Allocation
1..32, step 1
N/A

maximum number of EUTRAN Cell
RGCH/HICH for the dedicated EDCH users.
Code Resource
Allocation
1..32, step 1
N/A

maximum number of users with
traffic on common E-DCH in
enhanced uplink CELL_FACH
state in the cell.

whether the HS-PDSCHs' codes UTRAN Cell
of a cell are allocated by NodeB.
Maximal Scheduled E-DCH User
UTRAN Cell
Number in CELL_DCH state that
can be scheduled Per E-AGCH.
whether to increase the E-AGCH
or E-RGCH/HICH number when
UTRAN Cell
HSUPA service is rejected
because of the E-AGCH or ERGCH/HICH capacity limitation.
maximum number of E-AGCH
for the dedicated E-DCH users.

threshold to increase the EAGCH number. The E-AGCH
number could be increased if the
This
parameter
the
average
numberindicates
of scheduled
threshold
to decrease
Eusers of each
E-AGCHthe
is larger
AGCH
number.
The
E-AGCH
than or equal to the threshold.
number could be decreased if
the result of HSUPA scheduled
user number which take the cell
as the
serving cell
dividedthe
by the
This
parameter
indicates
current
E-AGCH
number
1
threshold
to increase
the minus
EsRGCH/HICH
less than ornumber.
equal toThe
the Ethreshold.
RGCH/HICH number could be
increased if the average number
This
parameter
the
of users
of eachindicates
E-RGCH/HICH
threshold
to decrease
Eis larger than
or equal the
to the
RGCH/HICH
umber. The Ethreshold.
RGCH/HICH number could be
decreased if the result of total
HSUPA user number divided by
the current E-RGCH/HICH
number minus 1 is less than or
This
indicates
equalparameter
to the threshold.
whether to judge the priority of
HSDPA and R99 services in
code resource allocation.
MBMS Configuration In A Cell

Object ID
additional offset added to cells
belonging to the MBMS preferred
frequency layer when judging the
cell-ranking criterion R of cell
reselection
for the
non-HCS
This parameter
indicates
thecell.
HCS priority offset added to the
HCS cells belonging to the
MBMS preferred frequency layer
when UE in the cell is in low
mobility state.
reserved numbers of SCCPCH
for MBMS with the step of one SCCPCH supporting 64 kbps
MBMS service (SF=32).
maximum number of MBMS
mechanism.
UTRAN Cell
Code Resource
Allocation
1..30, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..20, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..30, step 1
N/A
UTRAN Cell
Code Resource
Allocation
1..20, step 1
N/A
UTRAN Cell
Code Resource
0: Not Supported
Management/Conge
1: Supported
stion Control
N/A
UTRAN Cell
Related
Parameter
0..2147483647
N/A
UTRAN Cell
MBMS
0: 4
1: 8
2: 12
3: 16
4: 20
5: 30
6: 40
7: Infinity
dB
UTRAN Cell
MBMS
0..7
N/A
UTRAN Cell
MBMS
0..32, Step 1
N/A
UTRAN Cell
MBMS /Admission
Control
0..65535
N/A
MBMS /Admission
Control
0..100000, Step 1 N/A
MBMS
0: Off
1: On

maximum throughput for MBMS UTRAN Cell
traffic in a cell.
whether MBMS counting is
supported for the cell. If it is
"Off", UEs in the cell will not be UTRAN Cell
counted/ recounted and their
MBMS services will be carried in
PTM mode.
N/A
the protocolparameter that

indicates the window startpoint of
the FACH FP. DL data frames
are expected to be received after
this window startpoint. Time of
Arrival
Window Startpoint
This parameter
indicates the
(ToAWS)endpoint
is defined
withFACH
a
window
of the
positive
value
relative
of
FP. DL data
frames
areTime
expected
Arrival
Window
Endpoint
to be received before this
(ToAWE).
ToAWS Time
and ToAWE
window endpoint.
of Arrival
together
define
the
size of the
Window Endpoint (ToAWE)
is
arrival
in Node value
B. A data
definedwindow
with a positive
frame arriving
arrival
relative
Latest outside
Time of the
Arrival
window
gives a Timing
(LToA). ToAWS
and ToAWE
Adjustment
Control
Frame
together define
the size
of the
Response
from
Node
arrival window in NodeB.B. A data
frame arriving outside the arrival
MBMS
windowService
gives a Area
Timing
Configuration
ObjectFrame
ID
Adjustment Control
Response from Node B.
UTRAN Cell
MBMS /Node B
Management
0..1279, step 1
ms
UTRAN Cell
MBMS /Node B
Management
0..2559, step 1
ms
UTRAN Cell
Related
Parameter
0..2147483647
N/A

MBMS service area code.
RNC
MBMS
0..65535
N/A

Layer Configuration Object ID
UTRAN Cell
Related
Parameter

frequency band used by the cells
RNC
of preferred frequency layer in
the MBMS service area
MBMS

downlink UTRA absolute RF
channel number of the Cells of
preferred frequency layer in the
MBMS Service Area .
RNC
MBMS

number of a preferred frequency
RNC
layer in a MBMS service area
code.
MBMS

logical cell list of a preferred
frequency layer in a MBMS
service area code.
MBMS
RNC
MBMS Non Preferred Frequency UTRAN Cell

Layer Object ID
Related
Parameter

frequency band used by the cells
RNC
of non preferred frequency layer
in the MBMS service area
MBMS

downlink UTRA absolute RF
channel number of the Cells of
non preferred frequency layer in
the MBMS Service Area.
MBMS
RNC
{freqBandInd==0}
[10562..10838],
0..2147483647
{freqBandInd==1}
[9662..9938][412]
0:
Band I
[437][462][487]
1:
Band II
[512][537][562]
2: Band III 3: Band
[587][612][637]
IV
[662][687],
4:
Band V
{freqBandInd==2}
5:
Band VI
[1162..1513],
7:
Band VIII
{freqBandInd==3}
[1537..1738][1887]
[1912][1937][1962]
[1987][2012][2037]
[2062][2087],
{freqBandInd==4}
[4357..4458][1007]
[1012][1032][1037]
1..500
[1062][1087],
{freqBandInd==5}
[4387..4413][1037]
[1062],
{freqBandInd==7}
N/A
[2937..3088]
N/A
N/A
N/A
N/A
N/A
{freqBandInd==0}
0..2147483647
N/A
[10562..10838],
{freqBandInd==1}
[9662..9938][412]
0: Band I
[437][462][487]
1: Band II
[512][537][562]
2: Band III 3: Band
[587][612][637]
N/A
IV
[662][687],
4: Band V
{freqBandInd==2}
5: Band VI
[1162..1513],
7: Band VIII
{freqBandInd==3}
[1537..1738][1887]
N/A
[1912][1937][1962]
[1987][2012][2037]
[2062][2087],
{freqBandInd==4}
[4357..4458][1007]
[1012][1032][1037]
[1062][1087],
{freqBandInd==5}

number of a non preferred
RNC
service area code.
MBMS
1..500
N/A

logical cell list of a non preferred
RNC
service area code.
MBMS
N/A
N/A
This parameter is the enhanced

Cell_FACH object ID.
RNC
Parameter
0..2147483647
N/A
MAC-ehs queue identity
UTRAN Cell
HSPA Evolution
0..7
N/A
Channel Type Indicator

Indication for Downlink
Enhanced CELL_FACH Priority
Queue
UTRAN Cell
Indicates the priority of Mac-hs .

Used for Mac-hs scheduling. The
UTRAN Cell
larger of the value, the higher of
the priority. release timer (T1).
Re-ordering
The Re-ordering release timer
T1 controls the stall avoidance in
the UE reordering buffer.
UTRAN Cell
Correctly received MAC-hs
PDUs will be delivered to the
upper layers when When the
Timer
in multiples of T1
timer T1expires.
values .which is used to control
the reset of the MAC-ehs
UTRAN Cell
reordering functionality in
CELL_FACH or CELL_PCH .
MAC-hs Window Size, which is
used for MAC-hs PDU
retransmission
UTRAN Cell

whether Discard Timer is
UTRAN Cell
configured for the downlink
Enhanced
CELL_FACH
queue.
Discard
Timer
, which defines
the
time to live for a MAC-hs SDU
starting from the instant of its
arrival into an HSDPA Priority
UTRAN Cell
Queue. The Node B shall use
this information to discard out-ofdata MAC-hs SDUs from the
HSDPA
Priority Queues.
This parameter
indicates the
Maximum MAC-c PDU Size for
UTRAN Cell
flexible PDU in Downlink
Enhanced CELL_FACH.
HSPA Evolution
HSPA Evolution
HSPA Evolution
HSPA Evolution
HSPA Evolution
HSPA Evolution
HSPA Evolution
HSPA Evolution
0: CCCH
1: SRB1
2: Other SRB
3: DTCH
0: 10
1: 20
2:
30 step 1
0..15,
3: 40
4: 50
5: 60
6: 70
7: 80
8: 90
9: 100
10: 120
11: 140
12: 160
1..4
13: 200
14: 300
15:4400
0:
0:
1: 20
6
1:
2: 40
8
2:
3: 60
12
3:
4: 80
16
4:
5: 100
24
5:
6: 120
32
6: 140
7:
0: 160
False
8:
180
1: True
9: 200
10: 250
11: 300
12: 400
13: 500
14: 750
15: 1000
16: 1250
17: 1500
18:
1750step 1
1..1504,
19: 2000
20: 2500
21: 3000
22: 3500
23: 4000
24: 4500
25: 5000
26: 7500
N/A
N/A
ms
N/A
N/A
N/A
ms
bytes
The configured power for HSSCCH, which is a power level

relative to the configured in a
cell.
UTRAN Cell
HSPA Evolution
-35..15, step 0.1
dB
The configured power for HSPDSCH, which is a power level

relative to the configured in a
cell.
UTRAN Cell
HSPA Evolution
-35..15, step 0.1
dB
UTRAN Cell
HSPA Evolution
0: False
1: True
N/A
UTRAN Cell
HSPA Evolution
-5..10, step 1
dB
UTRAN Cell
HSPA Evolution
0..15, step 1
TTI
UTRAN Cell
HSPA Evolution
0..32, step 1
N/A

whether the
IE "ULtransmission
interference
additional
E-DCH
for common
E-DCH"
is
back
off in uplink
enhanced
configured in state.
SIB5/5bis.
CELL_FACH
DPCCH/EDPCCH/E-DPDCH
transmission
the
is
started
withbetween
sendingthe
thelast
PHYpower
offset
DATA-REQ
primitive every
transmitted preamble
and the
Transmission
Interval. The
initial power ofTime
the DPCCH
PHY-Data-REQ
primitive
is used
transmission in the Enhanced
to
request
SDUs used for
Uplink
in CELL_FACH
state.
communications passed to the
physical layer. Hereby, if TTI
length is 10 ms, then for the first
(1 + "Additional E-DCH
transmission back off")
Transmission
Time
Intervals
no
This
parameter
indicates
the
This
parameter
indicates
the
SDU
is
passed
to
the
physical
common
E-DCH
transmission
number
common
E-DCH
layer,
i.e.ofonly
DPCCH
continuation
back
off.
UE will
resources
in uplink
enhanced
transmission
takes
place.
If TTIEimplicitly
release
the
common
This
parameter
indicates
the
CELL_FACH
state.
length
is
2
ms,
then
for
the
first
DCH
resources
afterE-DCH
an empty
maximum
common
(2
+
"Additional
E-DCH
buffer
status
has been
reported
resource
allocation
time,
UE will
transmission
backB,
off")
as
SI
to
the
Node
and
after
implicit
release
the
common
ETransmission
Intervals
no
the last
HARQTime
process
has been
DCH
resources
when
the
SDU
is
passed
to
the
physical
acknowledged
or maximum
maximum
common
E-DCH
layer.
number
retransmission
resourceofallocation
time forhas
been
The empty
buffer
CCCHreached;
transmission
has been
status
report
is
transmitted
if
reached.
buffer remains empty for a
This
parameter
indicates
network
configured
periodthe
of
maximum
period
for
collision
time (E-DCH transmission
resolution
phase
common
continuation
backfor
off),
startingEDCH.
If the
UE does not
receive
with the
transmission
of the
last
its
E-RNTI
onE.g.
the ifE-AGCH
MAC-i
PDU.
the network
collision
resolution
configured
period ofchannel
time is upon
set
the
timer
reach
the
maximum
to zero,
then theindicates
buffer status
This
parameter
which
period
forpiggybacked
collision
resolution
report is
with
the
uplink
inner
loop power
control
phase,
then
the
collision
not
last
MAC-i
PDU
containing
user
algorithm is used in uplinkhas
been
resolved
and
so
the
UE
data.
If
the
network
configured
enhanced CELL_FACH state.
releases
period
of the
timeresources.
set toloop
"infinity",
For
1isinner
power
Thisalgorithm
parameter
indicates
the
implicit
resource
release
is
control
is
done
every
time
slot.
TPC step size for uplink inner
disabled.
For
2 inner
loop power
loopalgorithm
power control
in uplink
control
is
done
every
5
enhanced CELL_FACHtime
state.
slots.when inner loop power
Only
control algorithm 1 is selected,
this parameter needs to be
configured. For algorithm 2,
This
parameter
default
value of indicates
TPC stepthe
size is
assumed
HS-PDSCH
1 and this parameter ispower
not
offset
relative to P-CPICH/Sneeded.
CPICH power used for CQI
measurement in uplink
0: 8
1: 12
2: 16
3: 24
4: 32
5: 0
40
0:
6:
1: 80
8
7:
2: 120
16
3: 24
4: 40
5: 80
6: 120
7: infinity
UTRAN Cell
HSPA Evolution
TTI
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
8..24, step 1
TTI
UTRAN Cell
HSPA Evolution
1: Algorithm 1
2: Algorithm 2
N/A
UTRAN Cell
HSPA Evolution
1..2
dB
UTRAN Cell
HSPA Evolution
-6..13, step 0.5
dB
TTI

maximum bit rate of the common
UTRAN Cell
E-DCH user in uplink enhanced
CELL_FACH state.
HSPA Evolution
0..65535, step 1
kbps
UTRAN Cell
HSPA Evolution
-8.2..17.3, step
0.1
dB
UTRAN Cell
HSPA Evolution
-35..15.1, step 0.1 dB
UTRAN Cell
Related
HSPA Evolution
0..8000, step 1
kbps

whether ACK/NACK and CQI are
UTRAN Cell
supported on HS-DPCCH in
uplink enhanced CELL_FACH
state.
HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates the SIR

target of the common E-DCH in
uplink
enhancedindicates
CELL_FACH
This parameter
Initial
state.
F-DPCH
power in uplink
The largest value is a valid
value, it used to indicate that the
RNC not need to configure it in
PHYSICAL SHARED CHANNEL
RECONFIGURATION
REQUEST,
and indicates
the powerthe
of FThis parameter
DPCH
is
decided
by
NodeB.
allowed uplink common MAC
flow transport bandwidth for the
cell.

SCCPCH Configuration Object
RNC
ID
common physical channel ID of
SCCPCH. This parameter is
unique in one cell. Common
physical channel ID is the unique UTRAN Cell
identifier allocated to one
common physical channel within
a cell Up up to 32 SCCPCH can
be established in a cell.
UTRAN Cell
purpose of SCCPCH.
maximum transmission power of
the FACH which is mapped on
This
parameterThis
indicates
the is UTRAN Cell
the SCCPCH.
parameter
time
offset between
SCCPCH
the relative
value based
on the
and
PCCPCH.
For different
SPCPICH
transmission
power.
CCPCHs, there are may be
different S-CCPCH timing. And
the time offset relative to the P- UTRAN Cell
CCPCH frame timing is the
integral times of 256 code chips.
That is, S-CCPCH, k =
Tk*256
code chip
and Tk
{0,
This
parameter
indicates
the
1,
.., 149}.
power
offset of the SCCPCH
UTRAN Cell
TFCI domain to the data.

power offset of the SCCPCH
pilot domain to the data.
UTRAN Cell
Parameter
0..2147483647
0: Carrying PCH
1: Carrying R99
FACH, not
Supporting CBS
2: Carrying R99
FACH,
Supporting
4..35, step
1
CBS
3: Carrying R99
FACH&PCH, not
Supporting CBS
4: Carrying R99
FACH&PCH,
Supporting CBS
5: Carrying MCCH
FACH&R99 FACH,
not Supporting
-35..15 , step 0.1
CBS
6: Carrying MCCH
FACH&R99 FACH,
Supporting CBS
7: Carrying MCCH
FACH
0..38144, step 256
N/A
Power Control
/Node B
Management
0..6, step 0.25
dB
Power Control
/Node B
Management
0..6, step 0.25
dB
Node B
Management
Node B
Management
/Connection
Management
Power Control
/Node B
Management
Node B
Management
/Connection
Management
N/A
N/A
dB
chips
PRACH Configuration Object ID
UTRAN Cell
Related

PRACH. Common physical
channel ID is the unique
UTRAN Cell
a cell. One cell can contain
This
parameter
several
PRACH.indicates the
function of configuration of
PRACH preamble.PRACH
UTRAN Cell
preamble can be used in R99
and common E-DCH.
transmission time interval of the
This
parameter indicates all
RACH.
effective signatures when the
PRACH is used. 16 bit
represents 16 signatures; the bit
which equals 1 means the
corresponding signature is valid.
Each signature corresponds one
by one to the channelization
This
the
codeparameter
number of indicates
PRACH whose
minimum
SF is 16. effective spreading
This
indicates
theuse
factorparameter
that this PRACH
can
preamble
scrambling
index
(limiting the
maximumcode
rate that
that
this PRACH
can use. The
the PRACH
can transmit).
scrambling code that can be
usedeffective
for PRACH
in each cell
The
signatures
relates to to
theeach
DL primary
assigned
ASC of a
scrambling
code of the
cell. In
PRACH
correspond
to two
addition,
there
are
at most
parameters:
Available
signature
This
parameter
indicates
the
sixteen
preamble
scrambling
Begin
Index
and Available
permitted
number
of access
codes
available.
This parameter
signature
End
services
for
theIndex.
PRACH.
It sets
The
effective
signatures
can
be
used
to
distinguish
the
Their
relation
with
Available
the size of the following
three
assigned
to
each
ASC
of
a
PRACHs.
Signature
is:
After
ordering
the
arrays: Available signature Begin
PRACH
correspond
to
two
configured
Available
Signature
Index, Available signature End
parameters:
signature
(whose
bit Assigned
is Available
1) in theSubascending
Index and
Begin
Index
and
Available
order
(such
Channel
No.as, 2: 0; 5: 1; 12: 2),
signature
Endsignature
Index. Begin
the Available
Their
Available
Index relation
and the with
Available
signature
Signature
the
End Index is:
areAfter
the ordering
starting index
configured
Signature
and endingAvailable
index after
ordering.
(whose
bitavailable
is 1) in the
ascending
Range of
signatures
order
(such
as,
2:
0;
5:
1;Index12: 2),
(Available signature End
This
parameter
indicates
the
the
Available
signature
Begin
Available
signature
Begin
Index
allocated
sub-channel
number
Index
the Available
signature
+ 1) ofand
different
ASCs can
for
each
ASC
of
the
PRACH.
End
Index
areother.
the
starting
index
overlap
each
Generally
This
allocated
sub-channel
and
ending
index
after
ordering.
speaking, the higher level
the
number
can
not be
used directly,
Range
available
signatures
ASC is,ofthe
more
signatures
it
and
after
repeating
to
(Available
signature
End Indexwill be configured. according
the
configured
AICH
Available
signature=8.
Begin Index
Where MAX_ASC
transmission
timing,
+ 1) of different
ASCsdoing
can 'and'
operation
with
Available
Sub
overlap each other. Generally
Channel
then
the the
actual
speaking,Number
the higher
level
This
indicates
the it
value
is the
obtained.
ASC parameter
is,
more
signatures
number
of the ASCs
Where
MAX_ASC
=8.which are
will be configured.
configured
persistence
Where MAX_ASC =8. scaling
factors.
Parameter
0..2147483647
N/A
Node B
Management
68..99, Step 1
N/A
HSPA Evolution
0: Random-access
in R99
1: Random-access N/A
in Common EDCH
0: RACH 10ms
TTI
1: RACH 20ms
N/A
TTI
UTRAN Cell
Related
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Node B
Management / Idle
Mode and Common 0: Invalid
Channel
1: Valid
Behavior /Code
allocation
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
N/A
UTRAN Cell
UTRAN Cell
0: Invalid
1: Valid
Idle Mode and

Common Channel
0..15, step 1
N/A
Behavior //Node B
Management
Code Resource
Allocation / Idle
Mode and Common 1..DBS_RR_MAX_
N/A
Channel
ASC, step 1
Behavior /Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..15, step 1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..15, step 1
N/A
UTRAN Cell
Node B
Management / Idle
0..15
Mode and Common
Channel Behavior
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
N/A
0..6, step 1
This parameter is used by the

MAC layer to calculate the
This
parameter
indicatesforthe
transmission
possibility
the
mapping
between
ACwhose
and ASC.
access service class
ASC
AC
is the
stored in
is not
lessaccess
than 2.level
Where
UE
IMSI. ASC is the
MAX_ASC_PSF
=6. RACH
access level of PRACH physical
channel. Mapping of Access
Classes to Access Service
This
parameter
indicates
the
Classes
will be used
in initial
initial
persistence
level
setup dynamic
state. And
not be used
in
used
by
the
MAC
layer
to
connected
state.indicates the
This
parameter
calculate
transmission
Where the
maximum
times
for re-sending
possibility
for
the ASCi>=1.
Each
MAX_AC_ASC_MAPPING
attempts
on MAC
layer. The=7.
PRACH
is
configured
with
one
PRACH physical layer, L1,
value. The
dynamic
persistence
returns
three
status to
MAC layer
level
several PRACHs
whenofaccessing
the physical
allocated
to UE to
can
beactual
layer according
the
broadcast
together
in
SIB7.
cases:
ACK (acknowledged),
This parameter
indicates the
NOACK
B does
not
preamble(Node
judgment
threshold
response),
and NACK
when
the Node
B detects
(unacknowledged).
thethe
PRACH preambles.When
To make
MAC
layer
receives
NACK
or NO
access preamble of the
ACK,
adds
the
attempt
times,
M,
PPRACH transmission be
by
1.
When
M
is
over
this
detected by the Node B, the
parameter,
the
MAC
layer exits
proportion of
the
received
from the access
preamble
power process.
in the preamble
cycle
and the interference
level
This parameter
is the correction
should
be
larger
than
this
value when calculating the initial
parameter.
transmission power of PRACH
This
preamble.
power ramp step used by the UE
when it does not receive any
responses from AICH after
sending a preamble. This
parameter is used to be added to
The
UE can send
access
the previous
power,
and then the
preamble
again
if
not
next preamble is sent receiving
at this new
any
responses from AICH. This
power.
maximum number that the
access
preamble
can be sent
This
parameter
indicates
the
before
L1transport
receives channel
ACK or ID of
common
NACK.
RACH. Common transport
common transport channel within
a cell One cell contains only one
BCH.
AICH Configuration Object ID
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0.2..0.9, step 0.1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..7, step 1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..8, step 1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..32, step 1
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
(PRACH)/Power
Control
-36.0..0.0, step 0.5 dB
UTRAN Cell
Power Control / Idle

Mode and Common -35..-10, step 1
Channel Behavior
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior/HSPA
Evolution
1..8, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
1..64, Step 1
N/A
UTRAN Cell
Related
Node B
Management
65..96
N/A
UTRAN Cell
Related
Parameter
0..2147483647
N/A
Node B
Management
132..163, step 1
N/A
Node B
Management
/Connection
Management
0, 1
N/A

AICH. Common physical channel
ID is the unique identifier
UTRAN Cell
allocated to one common
This
parameter
used to
physical
channeliswithin
a cell
calculate
the contain
timing relationship
One cell can
several
between
AICHs. PRACH preambles,
between the PRACH preamble
and PRACH message, between UTRAN Cell
AICH and PRACH. In addition,
this parameter is used by the UE
to calculate the effective subchannel No. available to ASC.
Parameter
0..2147483647
N/A
Node B
Management
164
N/A
MBMS /Node B
Management
/Connection
Management
0: 18
1: 36
2: 72
3: 144
N/A

transmission power of MICH,
UTRAN Cell
which is the offset relative to the
PCPICH transmission power.
MBMS /Connection
Management
-10..5, step 1
dB

External
Load Control Information Object
UTRAN Cell
ID.
Parameter
0..2147483647
N/A
UTRAN Cell
Congestion
Control /Overload
Control
1..100
N/A
UTRAN Cell
0: Off
Services and Radio
1: On
Access Bearers
N/A
UTRAN Cell
Services and Radio

1..50
Access Bearers
N/A
UTRAN Cell
Congestion Control
0: Off
1: On
N/A

indicates whether a congested
UTRAN Cell
user can trigger forced handover
of the online users in the cell.
Parameter for future 0: Off

use
1: On
N/A

UTRAN Cell
user can trigger forced call drop
of the online users in the cell.

use
1: On
N/A

user can trigger forced RAB
UTRAN Cell
transferring to FACH of the
online I/B users in the cell.

use
1: On
N/A
MICH Configuration Object ID
UTRAN Cell
Related

MICH. Common physical
UTRAN Cell
a cell One cell contains only one
MICH.
number of NI (Notification
UTRAN Cell
Indicators) that one MICH radio
frame contains.

maximum number of services
whose rates will be decreased
each time when congestion
takes
place.
This parameter
is a switch
indicating whether decreasing
guaranteed bit rate is supported
or not when the cell is in the
overload state. This parameter is
shared
by the uplink
and the
This parameter
indicates
downlink.
maximum number of selected
services whose guaranteed bit
rates will be decreased each
time when overload happens.
This parameter is shared by
uplink and downlink.
switch of rate downgrade ahead
of preemption.

threshold of the uplink serious
overload. The system is in the
serious overload status if the
uplink RTWP exceeds this
threshold,
and measures
serious
This
parameter
indicates the
overload
be taken
thresholdwill
of the
uplink to
common
decrease
the load
immediately.
overload. The
system
is in the
overload status if the uplink
RTWP exceeds this threshold,
and measures of overload will be
This
indicates
the
takenparameter
to decrease
the load
threshold
for releasing form
immediately.
uplink overload. A cell leaves
overload state when its RTWP
reported by Node B is lower than
the threshold indicated by this
parameter
for a is
period
of time.
This parameter
a switch
indicating whether decreasing
rate is supported or not when the
cell is in the uplink overload
state.
indicating whether forcing
handover is supported or not
when the cell is in the uplink
overload state.
UTRAN Cell
Overload Control
0..62, step 0.1
dB
UTRAN Cell
Overload Control
0..62, step 0.1
dB
UTRAN Cell
Overload Control
0..62, step 0.1
dB
UTRAN Cell
Overload Control
0: Off
1: On
N/A
UTRAN Cell
Overload Control
0: Off
1: On
N/A

indicating whether dropping call
UTRAN Cell
is supported or not when the cell
is in the uplink overload state.
Overload Control
0: Off
1: On
N/A
UTRAN Cell
Overload Control
1..8
N/A
UTRAN Cell
Overload Control
1..50
N/A
UTRAN Cell
Overload Control
1..50
N/A
UTRAN Cell
Overload Control
1..100, step 1
UTRAN Cell
Overload Control
0..100, step 1
UTRAN Cell
Overload Control
0..100, step 1

maximum number of DRBC
steps of decreasing data rate for
the selected service each time
when uplink overload happens.
UEs which are forced to be
handed over each time when
uplink overload happens.
dropped
each time
when uplink
This parameter
indicates
the
overload
happens.
threshold of the downlink serious
overload. The system is in the
serious overload status if the
download TCP exceeds this
threshold
and measures
This parameter
indicates of
the
serious
overload
should be taken
threshold of the downlink
to
decrease
the downlink
load is
common
overload.
The system
immediately.
in
the overload status if the
downlink load exceeds this
threshold
and measures
This parameter
indicates of
the
overload
should
taken tofrom
threshold for the be
releasing
decrease
the downlink
downlink overload.
Theload
system is
immediately.
released
from the overload
status if the downlink load
decreases below the threshold.
And the measures of decreasing
the downlink load should be
stopped.

indicates whether decreasing
data rate is supported or not for
when the cell is in the downlink
overload state.
indicates whether forcing
handover is supported or not for
when the cell is in the downlink
overload state.
indicates whether forcing drop is
supported or not for when the
cell is in the downlink overload
state.
maximum number of DRBC
steps of decreasing data rate for
the selected service each time
when downlink overload
happens.
UEs forced to be handed over or
radio links to be deleted each
time when downlink overload
happens.
dropped each time when
downlink overload happens.
indicates whether it is supported
for
maximum
FACH
Thisadjusting
parameter
indicates
the
power
when
the
cell
is
in
the of
common overload threshold
downlink
overload
This
the
HS-DSCH.
Thestate.
system
is in
parameter
is status
used inwhen
MBMS.
the overload
the
sum of HS-DSCH Required
Power and the transmitted
carrier power of all codes not
usedparameter
for HS-PDSCH,
HS-SCCH,
This
indicates
the
E-AGCH,
E-RGCH
or E-HICH
is
threshold for
releasing
from HSover
this
threshold,
and
DSCH overload. The system is
measures
should
to
released from
the be
HStaken
overload
decrease
the
load.
status if the downlink load
decreases below the threshold
This
is a
switch which
and. parameter
measures of
decreasing
the
indicates
whether
it is
or
HS overload
should
beopen
stopped.
closed for interactive or
background RABs to be
transferred to FACH from DCH
or HSDPA when the cell is in the
This
parameter
overload
state. indicates the
maximum users of interactive or
background RABs to be
transferred to FACH from DCH
or HSDPA when the cell is in the
overload
state. indicates the
This parameter
algorithm of load decreasing
during common overload for
HSDPA cell. HS load decreasing
and R99 load decreasing can be
selected.
0: Off
1: On
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
1..8
/Congestion Control
N/A
UTRAN Cell
Overload Control
1..50
N/A
UTRAN Cell
Overload Control
1..50
N/A
UTRAN Cell
MBMS
0: Off
1: On
N/A
UTRAN Cell
Overload Control
0..100, step 1
UTRAN Cell
Overload Control
0..100, step 1
UTRAN Cell
Overload Control
0: Off
1: On
N/A
UTRAN Cell
Overload Control
0..255
N/A
Overload Control
0: R99 Load
Decreasing
Algorithm
1: HS Load
Decreasing
Algorithm)
N/A
UTRAN Cell
0: Off
1: On
0: Off
1: On
N/A
N/A
N/A
number limitation when

attempting to transfer to HSDSCH or E-DCH during DRBC.
When users attempting to
transfer from FACH or DCH to
HS-DSCH or E-DCH is refused
because of HS-DSCH or E-DCH
user number limit, if this switch is
"On" , it would force the on line
low priority HS-DSCH or E-DCH
users
transfer toindicates
CELL_FACH
The parameter
RTWP
state,
so
that
the
higher
priority
load low threshold.
When
the
users
useof
HS-DSCH
or ERTWPcould
payload
a cell is lower
DCH
resource.
If
this
switch
is
than the value indicated by the
"Off"
,
it
would
not
cause
the
on
parameter, it means the RTWP
line HS-DSCH
E-DCH
users
The
parameter
indicates
RTWP
load
state of theor
cell
is low.
transfer
to CELL_FACH
state
load medium
threshold. When
when
failed
to
transfer
to
HSthe RTWP payload of a cell
is
DSCHthan
or E-DCH
during
DRBCby
lower
the value
indicated
The
parameter
RTWP
dueparameter,
to
user number
limitation.
the
itindicates
means
the
load
medium
threshold.
If the
RTWP
load state
of the cell
is
RTWP
payload of a cell is lower
medium.
parameter, it means the RTWP
load state of the cell is high. If
the payload of a cell is greater
than
the value indicated
the
The parameter
indicates by
TCP
parameter,
the
RTWP
load
state
load low threshold. When the
of
thepayload
cell is overload.
TCP
of a cell is lower
parameter, it means the TCP
load
state of theindicates
cell is low.
The parameter
TCP
load medium threshold. When
the TCP payload of a cell is
lower
than the value
indicated
The parameter
indicates
TCP by
the parameter,
it means Ifthe
load
medium threshold.
theTCP
load
of the
TCP state
payload
of acell
cellisismedium.
lower
parameter, it means the TCP
load state of the cell is high. If
the payload of a cell is greater
than
the value indicated
the
The parameter
indicates by
code
parameter,
the
TCP
load
state
load low threshold. When the of
the
is overload.
codecell
payload
of a cell is lower
The
parameter
indicates by
Code
than the value indicated
the
load
medium
threshold.
If
the
parameter, it means the code
Code
payload
of cell
a cell
lower
load state
of the
is is
low.
parameter, it means the Code
load state of the cell is medium.if
the occupied code resource is
greater than the value indicated
The
parameter
indicates
CEthat
load
by this
parameter,
it means
low
threshold.
When
the
CE
the code resource load state is
payload
of a cell is lower than
high.
The
parameter
indicates
the value
indicated
by theCE load
medium
threshold.
If
the CE
CE load
parameter, it means the
payload
of acell
cellisislow.
lower than
state of the
the value indicated by the
parameter, it means the CE load
state of the cell is medium.if the
occupied code resource is
greater
than theindicates
value indicated
The parameter
the low
by
this
parameter,
it means
threshold of the number
of that
the codeuser.
resource
stateofis
HSDPA
If the load
number
high.
HSDPA user is lower than the
parameter, the HSDPA user load
state of the cell is low.
UTRAN Cell
parameter for future 0: Off

use
1: On
N/A
UTRAN Cell
Handover Control
0..62, step 0.1
dB
UTRAN Cell
Handover Control
0..62, step 0.1
dB
UTRAN Cell
Handover Control
0..62, step 0.1
dB
UTRAN Cell
Handover Control
0..100, Step: 1
UTRAN Cell
Handover Control
0..100, Step: 1
UTRAN Cell
Handover Control
0..100, Step: 1
UTRAN Cell
Handover Control
0..128
N/A
UTRAN Cell
Handover Control
0..128
N/A
UTRAN Cell
Handover Control
0..100, Step: 1
UTRAN Cell
Handover Control
0..100, Step: 1
UTRAN Cell
Handover Control
0..65535
N/A

middle threshold of the number
of HSDPA user. If the number of
HSDPA user of a cell is greater
than DPAUNumLowThd and
lower than the value indicated by
this parameter, it means the
HSDPA user load state is middle;
ifThe
theparameter
number ofindicates
HSDPA user
is
the low
greater
than
the
value
indicated
threshold of the number of
by
this parameter,
means of
that
HSUPA
user. If indicates
theitnumber
The
parameter
theis
the HSDPA
user
load than
state
HSUPA
user
is
lower
the
middle
threshold of the number
high.
value
indicated
thisnumber of
of HSUPA
user. by
If the
parameter,
the
HSUPA
load
HSUPA user of a cell is user
greater
state
of
the
cell
is
low.
than UPAUNumLowThd and
HSUPA user load state is middle;
ifThe
theparameter
number ofindicates
HSUPA user
is
the low
greater
than
the
value
indicated
threshold of the number of
by
this parameter,
itnumber
meansofthat
MBMS
user. If the
The
parameter
indicates
theis
the HSUPA
user
loadthan
state
MBMS
user
is
lower
the
middle
threshold
of
the
number
high.
value
indicated
by
this
of MBMS user. If the number of
parameter,
load
MBMS userthe
of aMBMS
cell is user
greater
state
of
the
cell
is
low.
than MbmsUNumLowThd and
MBMS user load state is middle;
ifThe
theparameter
number ofindicates
MBMS user
is
the low
greater
than
the
value
indicated
threshold of the number of signal
by
this. parameter,
it means
that
users
If the number
of signal
the
MBMS
user
loadthe
state
is
The
parameter
indicates
the
users
is lower
than
value
high.
middle
threshold
of the number
indicated
by this parameter,
the
of
signal
users.
the number
of
signal
user
loadIfstate
of the cell
singal
users
of
a
cell
is
greater
is low.
than SigUNumLowThd and lower
than the value indicated by this
parameter, it means the signal
user load state is middle; if the
number of signal users is greater
than the value indicated by this
parameter, it means that the
SCPICH
Configuration
signal user
load state isObject
high. ID
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Handover Control
0..65535
N/A
UTRAN Cell
Related
Parameter
0..2147483647
N/A
Node B
Management
36..67, step 1
N/A
Power Control
/Node B
Management
-35..15, step 0.1
dB

SCPICH transmission power
offset for MIMO. This parameter UTRAN Cell
is the offset relative to the
PCPICH power.
Power Control
/MIMO
-6..0, step 1
dB

PICH Configuration Object ID.
Parameter
0..2147483647
N/A

SCPICH. Common physical
UTRAN Cell
a cell. Up to 32 SCPICHs can be
established
in a indicates
cell.
This parameter
the
SCPICH transmission power.
UTRAN Cell
This parameter is the offset
relative to the PCPICH power.
UTRAN Cell
Related

the PICH. Common physical
UTRAN Cell
Related
a cell. One cell can contain
several
PICHs. indicates the
This parameter
number of the PI (Paging
UTRAN Cell
Indicator) that one PICH radio
frame contains.
Node B
Management
100..131, step 1
N/A
0: 18
Connection
1: 36
Management /Node
2: 72
B Management
3: 144
N/A
RNC
Parameter
0..2147483647
N/A
RNC
Parameter
0..2147483647
N/A
Service
Related
Parameter
0..65534
N/A
Service
Related
MBMS
0: PTP MBMS
Service or NonMBMS Service
1: PTM MBMS
Service
2: Qchat service
N/A
Service
Related
MBMS
10..16000000 ,
step 10
bps

maximum bit rate of a sub
Service
service. The parameter takes the
Related
value of the assigned maximum
bit rate in RAB parameters
Services and Radio 10..256000000,

Access Bearers
step 10
bps

whether a sub service is uplink
or downlink.
Services and Radio 0: Uplink

Access Bearers
1: Downlink
N/A
Services and Radio 0: CS Domain

Access Bearers
1: PS Domain
N/A
Service
Related
0: Conversational
1: Streaming
Services and Radio 2: Interactive
Access Bearers
3: Background
4: Unknown
Conversational
N/A
Service
Related
MBMS

Service Function Object ID.

Object
ID.
This parameter
indicates the sub
service type, used for numbering
for each sub service. 0...5 are
used for siganlling service;
service. Odd number is
configured for downlink service;
even number is configured for
This
uplinkparameter
service indicates
whether this service is a MBMS
service, Qchat service, or normal
service.
minimum bit rate of a sub
service.
Service
Related

Service
whether the sub service is in CS
Related
domain or in PS domain.
This
This parameter
parameter indicates
indicates the
whether
the release
of PTM
service type
of the sub
service,
radio
permitted or not
whichbearer
can beisconversational,
for
a MBMSinteractive,
service. If this switch
streaming,
is
"Off",
it
won't
allow to release
background or unknown
the
PTM radio bearer, which
conversational.
means that it only can adopt
PTM for the service; if this switch
is "On", it will allow to release the
PTM radio bearer, which means
that when the number of UE
which wish to receive MBMS
service is greater than UE
number threshold used for
switching between PTP and
PTM, then it will choose PTP for
the service.
0: Off
1: On
N/A
This parameter is UE DTX/DRX

configuration Index which
indicates a set of DTX/DRX
parameters. Each service
obtains the DTX/DRX
parameters according to the UE
DTX/DRX
configuration
This parameter
indicatesindex.
the
maximum number of
retransmissions for the sub
service when it is beared on EDCH.
uplink traffic Eb/N0 used in
uplink equivalent AMR users
number calculation algorithm,
and it is used for power control.
Internal Measurement Profile
Object
ID.
This parameter
indicates the ID
of UE internal measurement
Profile. There are several
different sets of UE internal
measurement configuration in
use this parameter to index
these sets of configuration
This
parameter
This
parameter indicates
indicates the
the UE
seperately.
RLC
mode ofPower
the UE
internal
Transmitted
Event
measurement
for
is
AM
RLC,
RNC
AMR Object ID. can request UE
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to
the traffic
the reduce
L3 filtering
on thevolume of
the
measurement
report
and
measurement
results
of the
increase
the
system
capacity).
internal measurement.
maximum event number of UE
Service
Related
HSPA Evolution
N/A
N/A
Service
Related
Power Control
0..15
N/A
Service
Related
Power Control
-10..30, step 0.1
dB
RNC
Parameter
0..2147483647,
Step 1
N/A
RNC
Parameter
0..9, Step 1
N/A
RNC
Parameter
0..2147483647,
Step 1
N/A
RNC
AMR-NB & AMRWB
RNC
AMR-NB & AMRWB
RNC
AMR-NB & AMRWB

internal measurement event
RNC
identity.
AMR-NB & AMRWB

period of time during which the
event condition has to be
satisfied before sending a
measurement report.
RNC
AMR-NB & AMRWB

transmitted power threshold in
RNC
event 6a/6b.
AMR-NB & AMRWB
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..2,15
Step 1
13: 17
14: 19
0: 0
1: 10
0:
2: 6a
20
1:
3: 6b
40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-50..0,
step 1
13: 1280
14: 2560
15: 5000
N/A
N/A
N/A
N/A
ms
dB
This
This parameter
parameter indicates
indicates the
the UE
RLC
mode ofPower
the UE
internal
Transmitted
Event
RNC
measurement
for
is
RLC,ID.
RNC can request UE
PSAM
Object
RNC
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to reduce
the traffic
the
L3 filtering
on thevolume of
RNC
the
measurement
report
and
measurement
results
of the
increase
RNC
Parameter
Dynamic Radio
Bearer Control
Dynamic Radio
Bearer Control
Dynamic Radio
Bearer Control

RNC
identity.
Dynamic Radio
Bearer Control

measurement report.
RNC
Dynamic Radio
Bearer Control

RNC
event 6a/6b.
Dynamic Radio
Bearer Control
This
This parameter
parameter indicates
indicates the
the UE
RLC
mode ofPower
the UE
internal
Transmitted
Event
RNC
measurement
for
is
AM RLC,Object
RNC can
Handover
ID. request UE
RNC
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to
the traffic
the reduce
L3 filtering
on thevolume of
RNC
the
measurement
report
and
measurement
results
of the
increase
Parameter
Handover Control
Handover Control
RNC
Handover Control

RNC
identity.
Handover Control
0..2147483647,
Step 1
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..2,15
Step 1
13: 17
14: 19
0: 0
1: 10
0:
2: 6a
20
1:
3: 6b
40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-50..0,
step 1
13: 1280
14: 2560
15: 5000
0..2147483647,
Step 1
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..2,15
Step 1
13: 17
14: 19
0: 6a
1: 6b
N/A
N/A
N/A
N/A
N/A
ms
dB
N/A
N/A
N/A
N/A
N/A

measurement report.
RNC
Handover Control

RNC
event 6a/6b.
Handover Control
This
This parameter
parameter indicates
indicates the
the UE
RLC
the UE internal
Rx-Txmode
Timeof
Difference
Period
RNC
measurement
for
is
AM RLC,
RNCID.
can request UE
Location
Object
RNC
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to
the traffic
RNC
the reduce
L3 filtering
on thevolume of
the
measurement
report
and
measurement
results
of the
increase
Parameter
Location Service
Location Service

amount of reporting in periodical RNC
reporting.
Location Service

reporting interval in periodical
reporting.
Location Service
RNC
This
This parameter
parameter indicates
indicates the
the UE
RLC
the UE internal
Rx-Txmode
Timeof
Difference
Event
RNC
measurement
for
is
AM RLC,
RNC
UTRAN
Object
ID.can request UE
RNC
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to
the traffic
the reduce
L3 filtering
on thevolume of
RNC
the
measurement
report
and
measurement
results
of the
increase
Parameter
Location Service
Location Service
RNC
Location Service

RNC
identity.
Location Service
0: 0
1: 10
2: 20
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-50..0,
step 1
13: 1280
14: 2560
15: 5000
ms
0..2147483647,
Step 1
N/A
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
0:
9: 1
9
1:
10:211
1:
2:
413
11:250
2:
3:
815
12:500
3:
4:
16
13:1000
17
4:
5:
32
14:2000
19
5:
6: 3000
64
6:
7: 4000
Infinity
7: 6000
8: 8000
9: 12000
10: 16000
11: 20000
12: 24000
0..2147483647,
13: 28000
Step
1
14: 32000
15: 64000
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..2,15
Step 1
13: 17
14: 19
5: 6f
6: 6g
dB
N/A
N/A
N/A
ms
N/A
N/A
N/A
N/A
N/A

measurement report.
RNC
Location Service

Rx-Tx time difference reporting RNC
threshold in chips in event 6f/6g.
Location Service

UE Rx-Tx
Difference
Event
RLC
modeTime
of the
UE internal
MeasurementConfiguration
for
RNC
measurement report. If the value
RL
Timing
Adjustment
Object
ID.
RNC
measurements
AM mode
This parameter in
indicates
theand
those
less
important
in
UM
mode
(to
the traffic
RNC
the reduce
L3 filtering
on thevolume of
the
measurement
report
and
measurement
results
of the
increase
RNC
Parameter
Handover Control
Handover Control
Handover Control

RNC
identity.
Handover Control

measurement report.
RNC
Handover Control
RNC
Location Service
RNC
Parameter
RNC
Dynamic Radio
Bearer
Control/HSUPA
Introduction
RNC
Dynamic Radio
Bearer
Control/HSUPA
Introduction

Rx-Tx time difference reporting
threshold in chips in event 6f/6g.
Transmitted
Power
Event the
This parameter
indicates
Measurement
Configuration
RLC
mode of the
UE internalfor
Power
Limitation
judgment
measurement
report.
If the value
Object
ID,
which
is
used
by E-UE
is AM RLC, RNC can
request
TTI
switching
and
ROT
dynamic
adjustment
commonly.
the error SDU
label (not
measurements
AM mode
This parameter in
indicates
theand
those less
important
UM mode
filtering
factor
that UEinperforms
(to
the traffic
the reduce
L3 filtering
on thevolume of
the
measurement
report
and
measurement results
of the
increase
the
system
capacity).
0: 0
1: 10
2: 20
3: 40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
768..1280,
13: 1280 step 1
14: 2560
15: 5000
ms
0..2147483647,
Step 1
N/A
0:
0: Acknowledged
0
Mode
1:
1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12:
1..2,15
Step 1
13: 17
14: 19
0: 0
1: 10
5:
2: 6f
20
6:
3: 6g
40
4: 60
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
768..1280,
13: 1280 step 1
14: 2560
15: 5000
0..2147483647
0:
0: Acknowledged
0
Mode
1: 1 RLC
1:
2: 2
Unacknowledged
3: 3
Mode
4: 4 RLC
5: 5
6: 6
7: 7
8: 8
9: 9
10: 11
11: 13
12: 15
13: 17
14: 19
chips
N/A
N/A
N/A
N/A
ms
chips
N/A
N/A
N/A
RNC
Dynamic Radio
Bearer
Control/HSUPA
Introduction

RNC
identity.
Dynamic Radio
Bearer
Control/HSUPA
Introduction

measurement report.
RNC
Dynamic Radio
Bearer
Control/HSUPA
Introduction

RNC
event 6a/6b.
Dynamic Radio
Bearer
Control/HSUPA
Introduction

ID of Cell Reselection Frequency RNC
and Priority Information
Parameter
0..2147483647
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..7
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..62, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..7, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..62, step 2
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..31, step 1
dB
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..8
N/A
UTRAN Cell
Idle Mode and

Common Channel
0..16383
Behavior /Handover
Control


absolute reselection priority of
serving
cell.
This parameter
is used in the
measurement rules for cell reselection when absolute priorities
are used. It specifies the value of
Srxlev in the serving cell
controlling
the rate
of interThis parameter
is used
in the
frequency
and
inter-RAT
measurement rules for cell remeasurements.If
selection when absolute priorities
SrxlevServingCell
> Spriori
are used. It specifies
the value of
Squal in the serving cell
controlling the rate of interThis
parameter
is used in the
frequency
and inter-RAT
rules
for
cell
reselection
when
measurements.If
absolute
priorities
are
used.
SrxlevServingCell > Spriorit It
specifies the limit for Srxlev in
the serving cell below which the
This
parameter
used
in the
UE may
performiscell
reselection
rules
for cell reselection
based
to a inter-frequency
cell on
an
on
RSRQ
whenabsolute
absoluteprior
equal
or lower
priorities are used. It specifies
the limit for SqualServingCell in
the serving cell below which the
UE may perform cell reselection
to a cell on a lower absolute
priority
layer. indicates the
This
parameter
number of inter-frequency centre
frequencies in UTRAN.
occupied downlink carrier central
channel.
1..7
0: 0
0:
1: 6a
10
1:
2: 6b
20
5:
3: 6f
40
6: 60
6g
4:
5: 80
6: 100
7: 120
8: 160
9: 200
10: 240
11: 320
12: 640
-50..0,
step 1
13: 1280
14: 2560
15: 5000
N/A
N/A
ms
dB
N/A

This
parameter
indicates
theof
absolute
reselection
priority
threshold
for celllayers
reselection
to a
inter-frequency
in UTRAN
higher priority UTRAN cell. There
This
the
are 2parameter
reselectionindicates
criteria: (1)
threshold
for cell reselection
SrxlevnonServingCell,
x of a to a
equal
lower UTRAN
priority UTRAN
higheror
priority
cell is
cell.
There
are
3 reselection
greater than UtranHighThresh
criteria
cell of a higher
during a: (1)
timeNo
interval
priority
frequency
or inter-RAT
Treselection
(2) more
than 1
fulfills
criteria
above
(2)the
secondthe
has
elapsed
since
SrxlevServingCell
UE camped on the<current
Threshserving,
low_ and the
serving cell.
SrxlevnonServingCell, x of a
equal or lower priority UTRAN
cell
greater than
Thisisparameter
indicates the
UtranLowThresh
time of
minimum requiredduring
qualitya level
interval
Treselection
(3)which
more
the
cell of
UTRAN cell
than
1 second
has elapsed
since
satisfies
the condition
of being
the
UE
camped
on
the
current
reselected by UE.
serving cell.
power level of UTRAN cell which
reselected by UE.
number of GSM frequency
groups

ARFCN GSM cell uses.
UTRAN Cell
Idle Mode and

Common Channel
0..7
Behavior /Handover
Control
N/A
UTRAN Cell
Idle Mode and

Common Channel
0..62, step 2
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
0..62, step 2
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
-24..0, step 1
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
-119..-25, step 2
Behavior /Handover
Control
dBm
UTRAN Cell
Idle Mode and

Common Channel
Behavior
N/A
UTRAN Cell
0: DCS 1800 Band

Idle Mode and
Used;
Common Channel
1: PCS 1900 Band N/A
Behavior /Handover
Used;
Control
0..16
This parameter indicates Starting

absolute radio frequency channel UTRAN Cell
No. of GSM cell.
Idle Mode and

Common Channel
0..1023
Behavior /Handover
Control
N/A

absolute reselection priority of
inter-rat layers in GERAN.
Idle Mode and

Common Channel
0..7
Behavior /Handover
Control
N/A
Idle Mode and

Common Channel
-115..-25, step 2
Behavior /Handover
Control
dBm
Idle Mode and

Common Channel
0..62, step 2
Behavior /Handover
Control
dB
Idle Mode and

Common Channel
0..62, step 2
Behavior /Handover
Control
dB
UTRAN Cell

This
parameter
indicates
the
power
level of GERAN
cell
which UTRAN Cell
threshold
forcondition
cell reselection
to a
satisfies the
of being
higher
priority
GERAN cell.
reselected
by UE.
There
are 2 reselection
This parameter
indicatescriteria:
the
(1)
x oftoaa
threshold for cell reselection
higher
priority
GERAN
cell
lower priority GERAN celll. is
There UTRAN Cell
greater
than GeranHighThresh
are 3 reselection
criteria : (1) No
during
time interval
cell
of aa higher
priority frequency
Treselection
(2) more
1
or inter-RAT fulfills
thethan
criteria
second
has
elapsed
since
the
above (2) SrxlevServingCell <
UE
camped on low
the current
Threshserving,
and the
UTRAN Cell
serving
cell.
SrxlevnonServingCell, x of a
lower priority GERAN cell is
greater than GeranLowThresh
during a time interval
Treselection (3) more than 1
second has elapsed since the
UE camped on the current
serving cell.

number
of EUTRA
centrethe
UTRAN Cell
The parameter
indicates
frequencies
downlink E-UTRAN Absolute
Number (EARFCN).F_DL =
F_DL_low + 0.1 * (N_DL
N_Offs-Dl), where F_DL is center UTRAN Cell
carrier frequency, F_DL_low is dl
lowest carrier frequency, N_DL is
DlEARFCN, N_Offs-Dl is carrier
frequency
offsetindicates
indicatedthe
by
This parameter
band indicator.
absolute
reselection priority of
UTRAN Cell
inter-rat layers in EUTRAN.
maximum
allowed
measurement
This parameter
indicates
the
bandwidth
on
a
carrier
threshold for cell reselection to a
frequency.
higher
priority EUTRAN cell.
There are 2 reselection criteria:
(1)
x of a
ThisSrxlevnonServingCell,
higher
priority
EUTRAN
cell
threshold for cell reselectionis
greater
than
EutranHighThresh
based on
RSRQ
to a higher
during aEUTRAN
time interval
priority
cell. There have
Treselection
(2) indicates
more
1
This
parameter
2 elements
fulfilled
forthan
cellthe
second
has
elapsed
since
the
threshold
cell reselection
to a
reselectionforcriteria:
(1)
UE
camped
the current
lower
priorityon
EUTRAN
SqualnonServingCell,
xcell.
of a
serving
cell.
There
3 reselection
higher are
priority
EUTRAN criteria
cell is :
(1)
No
cell
of
a
higher
priority
greater than Threshx, high2
This
parameter
indicates
the the
frequency
or inter-RAT
fulfills
during
a time
interval
threshold
for
cell
reselection
criteria
above(2)
(2)more than 1
Treselection
based
RSRQ
to<asince
lowerthe
SrxlevServingCell
secondon
has
elapsed
priority
EUTRAN
cell.
There
Threshserving,
low
and
the have
3
elements
fulfilled
for
cell
x
of a
serving cell.
reselection
criteria
: (1) cell
No cell
lower priority
EUTRAN
is of
a
higher
priority
frequency
or
greater than EutranLowThresh
inter-RAT
fulfills
the criteria
during a time
interval
above
(2) SqualServingCell
Treselection
(3) more than 1<
Threshserving,
low2 since
and the
second has elapsed
the
SqualnonServingCell,
x of a
lower
priority
serving
cell. EUTRAN cell is
This
parameter
indicates
the
greater
than Threshx,
low2
minimum
required
received
during a time
interval
power
level of(3)EUTRAN
cell1
Treselection
more than
which
satisfies
the
condition
of
second has elapsed since the
being
reselected
by
UE.
serving
cell.
This parameter
indicates the
minimum required quality level of
This
parameter
is a switch
which
EUTRAN
cell which
satisfies
the
indicates
high2
condition whether
of being Threshx,
reselected
by
and
UE. Threshx, low2 are
configured or not. If Threshx,
high2 and Threshx, low2 are not
configured, UE performs
If
the IE "E-UTRA
detection" is
absolute
priority reselection
included
in
SIB19
or MobilityUE
based on RSRP, otherwise
UTRAN
and set to
performsInformation
absolute priority
TRUE
and the
UE on
is in
reselection
based
RSRP or
CELL_PCH,
URA_PCH
state
RSRQ. For details
please
referor
idle
mode,
the
UE
may
detect
to TS 25.304.
the presence of a E-UTRA cell
on a frequency with a priority
lower than the current UTRA cell
and report the information to the
NAS.
UTRAN Cell
UTRAN Cell
Idle Mode and

Common Channel
Behavior
0..8
Idle Mode and

Common Channel
0..65535
Behavior /Handover
Control
Idle Mode and
Common Channel
0..7
Behavior /Handover
Control
0: 6
Idle Mode and
1: 15
Common Channel 2: 25
Behavior /Handover 3: 50
Control
4: 75
5: 100
Idle Mode and
Common Channel
0..62, step 2
Behavior /Handover
Control
N/A
N/A
N/A
N/A
dB
UTRAN Cell
Idle Mode and

Common Channel
0..31, step 1
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
0..62, step 2
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
0..31, step 1
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel
-140..-44, step 2
Behavior /Handover
Control
dBm
UTRAN Cell
Idle Mode and

Common Channel
-34..-3, step 1
Behavior /Handover
Control
dB
UTRAN Cell
Idle Mode and

Common Channel 0: False
Behavior /Handover 1: True
Control
N/A
UTRAN Cell
Idle Mode and

Common Channel
Behavior
N/A
0: False
1: True

ID of Load Balance Information
This parameter is a load balance
switch which indicates whether
the RRC load balance function is
supported for initial RRC
procedure used for accessing.
This parameter is a load balance
the load balance function is
supported for RAB assignment
This
parameter is a load balance
procedure.
load balance function is
supported for call holding
procedure. The application
scenes are including handover,
relocation,
RAB is
re-establishment
This parameter
a service
and
FACH->DCH.
balance switch which indicates
whether the RRC service
balance function is supported for
initial RRC procedure used for
accessing.
This parameter is a service
whether the load service function
is supported for RAB assignment
This
parameter is a service
procedure.
whether load balance function is
relocation, RAB re-establishment
and
This FACH->DCH.
parameter is a switch
indicating whether load balance
based on downlink transmitting
power
is supported
or not.the
This
parameter
indicates
weight of downlink transmitting
power. When evaluating the cell
load, several factors such as
downlink channelization code,
downlink transmitting power,
uplink
RTWP are
taken into
This parameter
indicates
the
account
for
load
balance.
downlink TCP load difference
threshold between interfrequency cells. It is Delta
threshold of TCP load between
target and source cell.
based on uplink RTWP is
This
parameter
indicates the
supported
or not.
weight of uplink RTWP. When
evaluating the cell load, several
factors such as downlink
channelization code, downlink
transmitting power, uplink RTWP
and HSDPA throughput are
taken into account for load
balance.
RNC
Parameter
UTRAN Cell
Load Balance
/Connection
Management
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
1..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
1..100 , step 1
0..2147483647
N/A
0: Off
1: Inter-frequency N/A
Switch On
0: Off
1: Inter- frequency
Switch On
2: Inter-system
N/A
Switch On
3: Inter-frequency
and Inter-system
Switch
0: Off On
1: Inter-frequency
N/A
Switch On

uplink RTWP load difference
threshold between interfrequency cells. It is Delta
threshold of uplink RTWP load
between target and source cell.
based on downlink
channelization
resource
This parametercode
indicates
the is
supported
or
not.
weight of downlink
channelization code. When
evaluating the cell load, several
factors such as downlink
channelization code, downlink
transmitting power, uplink RTWP
This
parameter
indicates
are taken
into account
forthe
load
downlink
channelization
code
balance.
threshold for load balance
between inter-frequency cells.It
is Delta threshold of code
between target and source cell.
This parameter is a CS balance
the balance function is supported
for CS service during RAB
assignment procedure.
This parameter indicates HSDPA
throughput threshold for load
balance between inter-frequency
cells.It is Delta threshold of
HSDPA
throughput
between
This
parameter
indicates
the
target
source
cell.
uplink and
available
HSUPA
throughput threshold for load
balance between inter-frequency
cells used to calculate load of
source cell. The larger the value
is, the harder of balance will be
triggered.vice
This parameterversa.
is a switch
based on HSDPA throughput is
supported or not.
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
1..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0: Off
1: On
N/A

UTRAN Cell
based on CE resource is open or
not.
Load Balance
0: Off
1: On
N/A
Load Balance
0: Off
1: On
N/A
Load Balance
1..100 , step 1
Load Balance
1..100 , step 1

UTRAN Cell
based on bandwidth is open or
not.
weight of HSDPA throughput. For
HSDPA, when evaluating the cell
UTRAN Cell
load, several factors such as
uplink RTWP and HSDPA
throughput are taken into
account for load balance.
weight of HSDPA throughput.
UTRAN Cell

downlink available
channelization code load
balance threshold of CS service.
If the local UTRAN cell's
downlink
available
This
parameter
indicates the
channelization
code usage ratio
downlink available
is
less than thecode
threshold
channelization
load
indicated
by
this
balance thresholdparameter,
of R99 PSthe
downlink
balance
judgment
service. Ifload
the local
UTRAN
cell's
is
performed
and
some
UEs may
downlink available
be balanced
to code
other
inter-the
This
parameter
indicates
channelization
usage
ratio
frequency
UTRAN
cell. threshold
downlink
available
load
is less than
the threshold
of
CS service
for parameter,
load balance
indicated
by this
the
between
UTRAN
cells. judgment
If the
downlink load balance
downlink
available
load UEs
of local
is performed
and some
may
UTRAN
cell
is
less
than
the
be balanced to other interThis
parameter
indicates
threshold
indicated
by thisthe
frequency
UTRAN
cell.
downlink
available
load
parameter, the downlinkthreshold
load
of
CS service
for load
balance
balance
judgment
is performed
between
the
and UE inRAT
localsystems.
cell mayIfbe
downlink
load of local
balanced available
to other inter-frequency
This
parameter
indicates
the
UTRAN
cell
than the
UTRAN
cell.is less
downlink
threshold
threshold available
indicatedload
by this
of
R99 PS service
for load
parameter,
the downlink
load
balance
between
UTRAN
cells. If
balance judgment is performed
the
downlink
available
load
and UE in local cell may be of
local
UTRAN
is indicates
less
than
the
balanced
to other
RAT
systems.
This parameter
the
threshold
indicated
by
this
uplink available load threshold of
parameter,
downlink
load
CS
service the
for load
balance
balance
is performed
betweenjudgment
UTRAN cells.
If the
and
UEavailable
in local cell
be
uplink
loadmay
of local
balanced
to
other
inter-frequency
UTRAN cell is less than the
UTRAN
cell.
This
parameter
indicates
threshold
indicated
by thisthe
uplink
available
load
of
parameter, the uplinkthreshold
load
CS
service
for loadisbalance
balance
judgment
performed
between
RAT
systems.
and UE indifferent
local cell
may
be
If
the uplink
load of
balanced
to available
other inter-frequency
This
parameter
local
cellcell.
is less indicates
than the the
UTRAN
uplink
available
loadbythreshold
of
threshold
indicated
this
R99
PS service
for load
parameter,
performs
the balance
uplink
between
UTRAN
cells. If
theUE
load balance
judgment
and
uplink
available
load
of
local
of local cell may be balanced to
UTRAn
cellsystems.
is less
than the
other
RAT
This parameter
indicates
the
threshold
indicated
by this
downlink available HSDPA
parameter, threshold
the uplink for
load
throughput
load
balance
is performed
balance judgment
between UTRAN
cells. If
and
UE in local
cell may
be
the downlink
available
HSDPA
balanced
throughputtoofother
localinter-frequency
UTRAN cell is
UTRAN
cells.
This
parameter
indicates
the
less than the threshold
indicated
uplink
available
HSUPA
by this parameter, the downlink
throughput
threshold
forisload
load balance
judgment
balance
between
performed
and UEUTRAN
in localcells.
cell If
the
mayink
beavailable
balancedHSUPA
to other interThis
parameter
is used
in the
throughput
of local
UTRAN
cell is
frequency
UTRAN
cell.
following
For multiless than scenario:
the threshold
indicated
RAB
service,
PS service
by this
parameter,
the inkisload
released
and
only
R99
CS
balance judgment is performed
service
remains,
if
the
cell
and UE in local cell may beis
R5+R6+R99
or R5+R99
and
only
balanced to other
UTRAN
cell.
HS PS is preferred traffic, UE will
This
parameter
be balanced
to aindicates
cell withthe
shared
balance
UTRNA
coveragetendency
relation, when
R99 service
neighboring
available andcell,
notGSM
only HS PS
neighboring
cellsthe
in parameter
Multi-Mode
preferred when
system
and
common
GSM
value is "On" .
neighboring cells exist
simultaneously. The larger the
value is, the easier neighboring
cell of UTRAN will be balanced.
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
0..100 , step 1
UTRAN Cell
Load Balance
/Handover Control
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0..256
N/A

balance tendency when UTRNA
neighboring cell, GSM
neighboring cells in multi-mode
system and common GSM
UTRAN Cell
neighboring
cellsindicates
exist the
This parameter
simultaneously.
The
larger
the
balance
tendency
when
UTRNA
value
is, the cell,
easier
neighboring
neighboring
GSM
cell
of GSM in
multi-mode
neighboring
cells
in multi-mode
system
will
be
balanced.
system and common GSM
UTRAN Cell
neighboring cells exist
simultaneously. The larger the
value is, the easier neighboring
cell of common GSM system will
be balanced.
GSM Cell's Carrier Number
UTRAN Cell
This parameter is switch which

indicates whether the dual carrier
This
parameter
load for
balance
functionindicates
is supported
balance
strategy
for signalling
initial RRC
procedure
used for on
DCH.
When RRC singnaling is
accessing.
forced to establish on DCH and
the initial service is classed as "
PS service" and UE protocol
version is R5 or later, if the
switch is "On" , RNC could
balance
user based
on HSDPA
This parameter
indicates
HSPA+
load
balance
strategy,
capability and each bit otherwise,
indicates
RNC
could balance user based
one capability.
on
R99
load balance
strategy.
This
parameter
indicates
Max_HSPA_PLUS_CAP
whether
HSPA+
capability
balance
during
RAB assignment
of HSPA+
capability
procedure will be taken
account.Each bit indicates
whether
the balance
of
This parameter
indicates
corresponding
HSPA+
capability
whether HSPA+ capability
is
used.
balance during call holding
Max_HSPA_PLUS_CAP
procedure will be taken
indicates
the maximum
number
account.Each
bit indicates
of
HSPA+
capability
whether
the
balance of
corresponding HSPA+ capability
is
used.
This
Max_HSPA_PLUS_CAP
priority of HSPA+ capability and
indicates
the maximum
number
each bit indicates
one priority
of
of
HSPA+ capability
corresponding
HSPA+ capability.
Max_HSPA_PLUS_CAP
indicates
maximum
number
threshold the
of DC
redirection
of
HSPA+
capability
strategy. When measurement
quantity in IE "Measured results
on RACH" is CPich RSCP, if
current
Cpich RSCP
quality is
This parameter
indicates
higher
than
the
threshold,
threshold of DC redirectionthe DC
redirection
strategy
will be
strategy. When
measurement
triggered.in IE "Measured results
quantity
on RACH" is CPich EcNo, if
This
parameter
indicates
the
current
Cpich EcNo
quality
is
Cpich
Ec/N0 the DC
higher EcNoCpich
than the threshold,
threshold
directed
redirectionfor
strategy
willretry
be
triggered
by
inter-RAT
balancing.
triggered.
If reported Cpich EcNo Ec/N0 is
less than or equal to
DREcNoQualThrd or reported
Cpich RSCP is less than or
equal to DRRscpQualThrd, direct
retry will not be triggered.
UTRAN Cell
Load Balance
0..256
N/A
Load Balance
0..256
N/A
Load Balance
1..32
N/A
load balance
0: Off
1: On
N/A
0: HS-SCCH Less
1:
0: MIMO+HSDPA
Off
N/A
DC+HSDPA
1: On
64QAM
2: MIMIO+HSDPA
DC
3: MIMO+HSDPA
N/A
64QAM
4: HSDPA
DC+HSDPA
64QAM
5: MIMO
6:
HSDPA DC
0..1
N/A
7: HSDPA 64QAM
8: HSDPA 16QAM
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
0..1
N/A
UTRAN Cell
Load Balance
0..31
N/A
UTRAN Cell
load balance
-115..-25, step 1
dBm
UTRAN Cell
load balance
-24..-0, step 1
dB
UTRAN Cell
Load Balance
-120..-25, step 1
dBm

Cpich EcNoCpich Ec/N0
threshold for directed retry
triggered by inter-RAT balancing.
If reported Cpich EcNo Ec/N0 is
DREcNoQualThrd or reported
Cpich
RSCP is less
than or
This parameter
indicates
code
equal
to
DRRscpQualThrd,
direct
factor will be taken into
retry
will
not
be
triggered.
accounted in HSDPA throughput
load balance calculation. If this
Bit is 0, this factor will not be
considered.
factor will be taken into
accounted in HSDPA throughput
load balance calculation. If this
Bit is 0, this factor will not be
considered.
bandwidth factor will be taken
into accounted in HSDPA
throughput load balance
calculation. If this Bit is 0, this
factor will not be considered.
based on HSUPA throughput is
supported or not.
load balance strategy of HSPA
service will be chose.
This
parameter
indicates
the is
based
on HSDPA
user number
HSDPA
user
number
threshold
open or not.
for load balance between
UTRAN cells. If the HSDPA user
number of local UTRAN cell is
equal or greater than the value
indicated by this parameter, the
This
parameter
indicates
the
downlink
load balance
judgment
downlink
available
HSDPA
user
is performed and UE in local
cell
number
threshold
for
load
may be balanced to other
balance
between inter-frequency
UTRAN cell.
cells used to calculate load of
source cell. The larger the value
is, the harder of balance will be
triggered.
This parameter is the switch
which controls load or service
balance from UTRAN to
EUTRAN.
This
parameter is a load balance
scenes
are including
handover,
This
parameter
is a service
relocation,
RABwhich
re-establishment
balance switch
indicates
and
FACH->DCH.
whether
relocation, RAB re-establishment
and FACH->DCH.
UTRAN Cell
UTRAN Cell
Load Balance
Load Balance
-24..-0, step 1
dB
0: Without
Consideration of
Code
N/A
1: Consideration of
Code
0: Without
Consideration of
Power 1:
N/A
Consideration of
Power
0: Without
Consideration of
bandwidth
N/A
1: Consideration of
bandwidth
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0: Multi-Factors
Combination
Strategy
1: HSDPA User
Number Strategy
N/A
UTRAN Cell
Load Balance
0: Off
1: On
N/A
UTRAN Cell
Load Balance
0..255
N/A
UTRAN Cell
Load Balance
0..255
N/A
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
0: Off
1: Eutran Service
Balance
2: Eutran Load
Balance (Invalid)
0: Off
1: Inter-frequency
Switch On
0: Off
1: On
N/A
N/A
N/A
This parameter is a HSPA+

whether load balance function is
UTRAN Cell
procedure.
The is
application
This parameter
used in the
scenes are
including
following
scenario:
UEhandover,
has PS
relocation,
re-establishment
and initials RAB
CS as
the second
and
RABFACH->DCH.
on a cell which does not
contain CS preferred. If current
UTRAN Cell
cell has an overlap/contained-in
neighboring cell which contain
CS preferred and this switch is
"on", the multi-RAB is balanced
to the neighboring cell.
MR Configuration Object ID
RNC
Load Balance
0: Off
1: On
N/A
Load Balance
/Handover Control
0: Off
1: On
N/A
Parameter
0..2147483647
N/A
Specifies the MR-UE periodical

type switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

internal measurement type
switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

RNC
quality measurement type switch
RAN Performance
Monitor
0: Off
1: On
N/A

position measurement type
switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the MR-UE initial call

measurement type switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the MR-UE event

intra/inter-frequency and inter-rat
RNC
measurement type data
acquisition switch
RAN Performance
Monitor
0: Off
1: On
N/A

internal measurement type data
acquisition switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

quality measurement type data
acquisition switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the MR-UE event traffic

volume measurement type data RNC
acquisition switch
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the MR-UE Rnlu

periodical quality measurement
type switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

inter-freq measurement type
data acquisition switch
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

inter-rat measurement type data RNC
acquisition switch
RAN Performance
Monitor
0: Off
1:
0: On
4000
1: 6000
2: 8000
3: 12000
4: 16000
5: 20000
6: 24000
7: 28000
0:
8: Acknowledged
32000
Mode
RLC
9: 2000
1:
0:
4000
Unacknowledged
1:
6000
Mode
RLC
2: 8000
3: 12000
4: 16000
5: 20000
6: 24000
7: 28000
8: 32000
9: 2000
1..100, Step 1

Specifies
RLC
modethe
of MR-UE
the UE
measurement
interval
measurement reporting
report. If the
value RNC
for
the
MR
function.
RNC
those
lessthe
important
UM mode
Specifies
MR-UEinlocation
(to
reduce the reporting
traffic volume
of
measurement
interval
RNC
the
measurement
report
and
for the MR function.
RLC mode of the UE
Specifies
the MR
overload
measurement
report
in the RRC RNC
control
function.
connection phase. If the value is
AM RLC, RNC can request UE
RNC
Specifies
MR-UEininitial
those lessthe
important
UM call
mode
location
measurement
mode of
for RNC
(to reduce
the traffic volume
the
MR
function.
RAN Performance
Monitor
RAN Performance
Monitor
RAN Performance
Monitor
RAN Performance
Monitor
N/A
ms
N/A
ms
RAN Performance
Monitor
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
RAN Performance
Monitor
0: RTT preferred
N/A
1: AGPS preferred
N/A

location measurement mode for
the MR function.
RNC
RAN Performance
Monitor
0: RTT preferred
N/A
1: AGPS preferred
Specifies AMR bler event (5A)

measurement Switch.
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies AMR bler event

RNC
measurement total CRC number.
RAN Performance
Monitor
1..512
N/A

measurement error CRC
number.
RNC
RAN Performance
Monitor
1..512
N/A

measurement pending after
trigger CRC number.
RNC
RAN Performance
Monitor
1..512
N/A
Specifies non-AMR bler event

(5A) measurement switch.
RNC
RAN Performance
Monitor
0: Off
1: On
N/A

RNC
measurement total CRC number.
RAN Performance
Monitor
1..512
N/A

measurement error CRC
number.
RNC
RAN Performance
Monitor
1..512
N/A

measurement pending after
trigger CRC number.
RNC
RAN Performance
Monitor
1..512
N/A

switch of EMI function in MR
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the CS MR-UE

acquisition ratio for the MR
function.
RNC
RAN Performance
Monitor
1..100, Step 1
Specifies the PS MR-UE

acquisition ratio for the MR
function.
RNC
RAN Performance
Monitor
1..100, Step 1
Specifies the CS service type

which needs the MR function.
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the PS service type

which needs the MR function.
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the CS+PS service

type which needs the MR
function.
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
Cell MR Configuration Object ID RNC
Parameter
0..2147483647
N/A
Specifies the MR-UE

measurement switch for the MR
function.
UTRAN Cell
RAN Performance
Monitor
0: Off
1: On
N/A
Specifies the MR-CELL

Received Total Wide Band
Power measurement switch
UTRAN Cell

use
1: On
N/A

Transmitted Carrier Power
measurement switch
UTRAN Cell

use
1: On
N/A

Acknowledged PRACH
Preambles measurement
UTRAN Cell

use
1: On
N/A

Acknowledged PRACH
Preamblesmeasurement switch
UTRAN Cell

use
1: On
N/A
Specifies the MR-CELL UTRAN

GPS Timing of Cell Frames for
UE Positioningmeasurement
switch
UTRAN Cell

use
1: On
N/A
Specifies the MR-CELL HSDSCH Required Power

measurement switch
UTRAN Cell

use
1: On
N/A
Specifies the MR-CELL HSDSCH Provided Bit Rate

measurement switch
UTRAN Cell

use
1: On
N/A
Specifies the MR-CELL E-DCH

Provided Bit Rate measurement UTRAN Cell
switch

use
1: On
N/A
UTRAN Cell

use
1: On
N/A
UTRAN Cell

1..65535
use
N/A
Specifies the MR-CELL E-DCH

Non-serving Relative Grant
Down Commandsmeasurement
switch
measurement reporting interval
for the MR function. MR-CELL
measurement reporting interval
is the multiple of the Report
Periodicity for the cell common
measurement report.

CFN OFFSET Configuration
Object ID.
RNC
Parameter
The parameter indicates signal

service type that need config
CFN offset value.
RNC
Connection
Management
Feature Description
The Parameter indicates whether

the CFN offset value is applied to RNC
fast reconfiguration scene.
Connection
Management
Feature Description
The parameter indicates that

data retransmission rate factor
corresponding CFN offset value
over Uu interface.
RNC
Connection
Management
Feature Description
The parameter indicates that

packet length region
corresponding CFN offset value
over Uu interface.
RNC
Connection
Management
Feature Description
The parameter indicates CFN

offset value.
RNC
Connection
Management
Feature Description
RNC
Parameter
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control

ID of service handover
configuration.
service
handover
strategythe
This parameter
indicates
controlled
by RNC.combination
Bit0~Bit3
service handover
indicates
AMR
criteria in strategery
multi-RAB,ofand
RNC
service,
CS64
service,
PS RT
will perform related process
service
andtoPS
service,
according
theNRT
highest
priority
This
parameter
indicates
the
respectively.
If
the
bit
value sets
value
of
IE"service
handover"
service handover strategy
as
"0" , RNC
ignore
"service
controlled
by will
RNC.
Bit0~Bit3
handover"strategery
IE in requested
indicates
of AMRRAB,
and
perform
strategy
service,
CS64
service,according
PS RT
to
service
handover
strategy
set
service
and
PS
NRT
service,
This
parameter
indicates
the as
by
RNC;
If
the
bit
value
sets
respectively.
If thestrategy
bit value sets
service
"1"
and, handover
"service
handover"
is not
as
"0"
RNC
will
ignore
"service
controlled
by
RNC. Bit0~Bit3
included
in
requested
RAB,
RNC
handover"strategery
IE in requested
indicates
of AMRRAB,
will
also
perform
corresponding
and
perform
strategy
according
service,
CS64 service,
PS set
RT by
service
handover
strategy
to
service
handover
strategy
set
service
and
PS
NRT
service,
This
parameter
indicates
the as
RNC,
otherwise
RNC
will
by
RNC;
If
the
bit
value
sets
respectively.
If thebase
bit value
sets
service
strategy
perform
strategy
on the
"1"
and, handover
"service
handover"
is not
as
"0"
RNC
will
ignore
"service
controlled
RNC.
Bit0~Bit3
value
of "service
handover"
included
inby
requested
RAB, IE.
RNC
handover"
IE
in requested
indicates
strategery
of AMRRAB,
will
also
perform
corresponding
and
perform
strategy
according
service,
CS64 service,
PS set
RT by
service
handover
strategy
to
service
handover
strategy
set
service
and
PS
NRT
service,
RNC,
otherwise
RNC
will
by
RNC;
If
the
bit
value
sets
as
respectively.
If thebase
bit value
sets
perform
strategy
on the
"1"
and, RNC
"service
handover"
is not
as
"0"
will
ignore
"service
value
of "service
handover"
IE.
included
inIE
requested
RAB,RAB,
RNC
handover"
in requested
will
also
perform
corresponding
and perform strategy according
service
handover
strategy
setset
by
to service
handover
strategy
RNC,
otherwise
RNC
will
by RNC; If the bit value sets as
perform
strategyhandover"
base on the
"1" and "service
is not
value
of
"service
handover"
included in requested
RAB, IE.
RNC
will also perform corresponding
service handover strategy set by
RNC, otherwise RNC will
perform strategy base on the
0: Not More than

32
Byte
0..2147483647
1: Greater than 32
Byte and Not More
than 80 Byte
0:
Signalling
2: 3.4K
Greater
than 80
1:
13.6K
Byte and Signalling
Not More
2:
27.2K Byte
Signalling
than128
3:
6.8K
Signalling
3:
than
0: Greater
should be
128
Byte
and
Not
performed>should
More
than176
not be
Byte
0: False
performed>shall
4:
Greater
than
1: True
not
be performed
176
Byte
and
Not
(should be
More
than
224
performed>should
0:
0
Byte
not
be
1:
10
5:
Greater than
performed>shall
2:
20Byte and Not
224
not
be performed)
3:
50
More
thanbe
272
1:
should
4: 70
Byte
performed>shall
5:
100
6:
than
notGreater
be
272
Byte
and
Not
performed>should
More
than
320
not be performed
Byte
(should be
7:
Greater than
performed>shall
320
Byte and Not
not be
More
than 368
performed>should
Byte
not
be performed)
0..255,
stepthan
1
8:
2: Greater
should not
be
368
Byte and Not
performed>should
More
be than 416
Byte
performed>shall
9:
than
notGreater
be performed
416
Byte
and
0..2147483647
(should not beNot
More
than 464
performed>should
Byte
be
10:
Greater than
performed>shall
464
Byte
and Not
not be
performed)
More
than
512be
3: should not
Byte
performed>shall
11:
Greater
than
not
be performed,
0:
Ignore
service
512
Byte
and
Not
>should
beIE for
handover
More
than
560
performed
(should
AMR
service
Byte
not
be service
1:
Apply
12:
Greater than
performed>shall
handover
IE for
560
Byte
not
be
performed,
AMR
service
0:
Ignorebe
service
>should
handover
performed)IE for
CS64
4: shallservice
not be
1:
Apply service
performed>should
handover
IE for
be
CS64
service
0: Ignore service
performed>should
handover
IE for
not be performed
PS
RTnot
service
(shall
be
1:
Apply service
performed>should
handover
IE for
be
PS
RT
service
performed>should
0: Ignore service
not
be performed)
handover
IE for
5: shall
be
PS
NRTnot
service
performed>should
1:
Apply service
not be
handover
IE for
performed>should
PS NRT service
be performed
(shall not be
performed>should
not be
performed>should
be performed)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

controlled by RNC. If ServHoInd
Bit0 sets as "Ignore service
handover IE" , RNC will ignore
"service
handover"
IE in the
This parameter
indicates
requested
RAB,
and
perform
strategy based
on If ServHoInd
controlled
by RNC.
AmrServHoStra;
If ServHoInd
Bit1 sets as "Ignore
service
Bit0
sets
as
"Apply
handover IE" , RNCservice
will ignore
handover
IE" and "service
"service
handover"
IE
in the
This
parameter
handover"
is notindicates
included
in
requested
RAB,
and
perform
service
handover
strategy
requested
RAB,
RNC
will
also
strategy based
on If ServHoInd
controlled
by RNC.
perform strategy
based
on
Cs64ServHoStra;
If ServHoInd
Bit2
sets
as
"Ignore
serviceRNC
AmrServHoStra,
otherwise
Bit1
sets
as
"Apply
service
handover
IE"strategy
, RNC will
ignore
will
perform
base
on the
handover
IE" and
"service
This
parameter
indicates
the
"service
handover"
IE
in
value
of
"service
handover"
handover"
is not and
included
in IE.
service
handover
strategy
requested
RAB,
perform
requested
RAB,
RNC
will also
controlled
by
RNC.
If ServHoInd
strategy based
on
perform
based
on
Bit3
setsstrategy
as "Ignore
service
PsRtServHoStra;
If ServHoInd
Cs64ServHoStra,
otherwise
RNC
handover
IE""Apply
, RNC
will ignore
Bit2 sets as
service
will
perform
strategy
base
on
the
"service
handover"
IE
in
handover IE" and "service
value
of
"service
handover"
IE.
requested
RAB,
and
perform
handover" is not included in
strategy
based
requested
RAB,on
RNC will also
PsNrtServHoStra;
If ServHoInd
perform strategy based
on
Bit3
sets as "Applyotherwise
service RNC
PsRtServHoStra,
handover
IE"strategy
and "service
will perform
base on the
handover"
is not included
in IE.
value of "service
handover"
requested RAB, RNC will also
perform strategy based on
N/A
PsNrtServHoStra, otherwise
RNC will perform strategy base
on the value of "service
This
parameter
handover"
IE. indicates the
Application Service Type for the
Qos parameter setting. The
parameter have only one value
(QChat), adding which is only for
This
parameter
indicates
adding
new similar
servicethe
easily
Traffic Class for the Qchat Qos
parameter. For Qchat can setup
on different Traffic Class
(Interactive or Background), so
the Qchat Qos parameter should
be
set
accordingindicates
to Trafficthe
Class.
This
parameter
ARP Priority Level, used for
identifying Application Service
Type by matching with RAB
Parameters
ARP Preemption Capability, used
for identifying Application Service
Type by matching with RAB
Parameters
ARP Preemption Vulnerability,
used for identifying Application
Service Type by matching with
RAB Parameters
ARP Queuing Allowed capability,
used for identifying Application
Service Type by matching with
RAB Parameters
Basic Priority
0: should be
performed
1: should not be
performed
2: shall not be
performed
0: should be
performed
1: should not be
performed
2: shall not be
performed
0: should be
performed
1: should not be
performed
2: shall not be
performed
0: should be
performed
1: should not be
performed
2: shall not be
performed
RNC
handover control
N/A
RNC
handover control
RNC
handover control
RNC
handover control
N/A
Parameter
0..2147483647
N/A
RNC
QChat
0: QChat
N/A
RNC
QChat
2: Interactive
3: Background
N/A
RNC
QChat
0..15
N/A
RNC
QChat
0: Shall Not
Trigger Preemption
1: May Trigger
Pre-emption
N/A
RNC
QChat
0: Not Preemptable
1: Pre-emptable
N/A
RNC
QChat
0: Queuing Not
Allowed
1: Queuing
Allowed
N/A
RNC
QChat
0..15
N/A
N/A
N/A
N/A

Maximum SDU size
RNC
QChat
0..32768, Step 1
bits

RNC
QChat
0..256000000,
step 10
bps

RNC
QChat
0..256000000,
step 10
bps

Object ID, identifies an object
under its parent object uniquely.
RNC
Parameter
0..2147483647
N/A

DRX Cycle for QChat UE
RNC
QChat
3..9
N/A

DSCP value for Qchat
RNC
QChat
1..46
N/A
, step 1
This parameter defines the data

inactivity timer for QChat. QChat
UE can be allowed to be
RNC
switched from Cell_DCH to other
RRC state only when the
TQchatdormancy expires.
Dynamic Radio
Bearer Control
0..65535, Step 1
This parameter indicates Max

number of QChat Ue per DMP
RNC
QChat
100..3000
N/A
RNC
QChat
0..100
N/A
RNC
Power Control
0: False
1: True
N/A
RNC
Power Control
0..7, step 1
frames
RNC
Power Control
0..7, step 1
N/A

This parameter
indicates
number
whether
to configure
the postof
released period
QChator
UE
when
verification
not
for the
number
of ChatIfUE
is over
limitdo
Qchat service.
higher
layers
not indicate the usage of a postverification period, the UE shall
not transmit on the activated
uplink frequency until higher
layers consider the downlink
This
parameter
the
physical
channelindicates
established.
SRB
delay
for
Qchat
service.
TRUE indicates that a postWhen
DPDCH
is being
verification
period
shall be used.
transmitted,
UE
shall
not send
FALSE
means
that
a postThis parameter indicates
the
any
data
on
signalling
radio
verification
period
shall
not be
DPCH power control preamble
bearers
RB0
to RB4
during
used. for
length
Qchat
service.
Forthe
number
of frames
indicated
uplink DPCH,
power
control by
this
parameter.
preamble
should be transmitted
before DPDCH transmission.
When power control preamble is
being transmitted, inner power
control is in effect so as to
ensure the requirement of
DPDCH transmission power to
be satisfied.
This parameter indicates the DPI

RNC
Relationship Object ID.
Parameter
0..2147483647
Deep Packet
Inspection
0: Low Priority 0~5

1: Medium Priority
6~10
N/A
2: High Priority
11~15
Deep Packet
Inspection
0..15
N/A

basic priority after introduction of RNC
DPI.
Deep Packet
Inspection
0..15
N/A

Information of DPI Service
Object ID.
RNC
Parameter
0..2147483647
N/A

application service type Name.
RNC and
PLMN
Dynamic Radio
Bearer Control
N/A
N/A

RNC and
Drbc strategy configuration index
PLMN
for DPI scene.
Dynamic Radio
Bearer Control
N/A
N/A
CS/PS Pool Routing Function

Object ID
RNC
Parameter
0..2147483647
N/A
Configuration of IDNNS route to

Cs/Ps Pool Object ID
RNC
Parameter
0..2147483647
N/A

start value of Idnns range
RNC
RAN Sharing
0..999
N/A
This parameter indicates the End

RNC
value of Idnns range
RAN Sharing
0..999
N/A

Resource Pool Identifier in CS
Domain, if the Route Selection
UE-Based is supported, RNC will RNC
execute NNSF among the CN
belong to the same resource
pool
RAN Sharing
0..65535
N/A

application service priority class.
Three classes are defined: low
RNC
priority, medium priority and high
priority.
Basic Priority (BP) which is used
to map the DPI basic priority. DPI
RNC
basic priority is used in other
RRM priority mapping when DPI
is supported.
N/A

Resource Pool Identifier in PS
UE-Based is supported, RNC will RNC
pool
RAN Sharing
0..65535
N/A
Configuration of IMSI route to

Cs/Ps Pool Object ID
RNC
Parameter
N/A
This parameter indicates Rule

No of Imsi-map
RNC
RAN Sharing

matched digit
RNC
RAN Sharing
RNC
RAN Sharing
RNC
RAN Sharing
RNC
RAN Sharing
RNC
Parameter
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control
EUTRAN
Neighboring
Cell
Handover Control
{eutranFreqBandIn
0..2147483647
d==0}[0..599],
{eutranFreqBandIn
d==1}[600..1199],
{eutranFreqBandIn
d==2}
0..65535
[1200..1949],
{eutranFreqBandIn
d==3}
[1950..2399],
{eutranFreqBandIn
0..9
d==4}
[2400..2649],
{eutranFreqBandIn
d==5}
[2650..2749],
{eutranFreqBandIn
0..1
d==6}
[2750..3449],
{eutranFreqBandIn
d==7}
[3450..3799],
0..65535
{eutranFreqBandIn
d==8}
[3800..4149],
{eutranFreqBandIn
d==9}
0:
Band 1;
0..65535
[4150..4749],
1:
Band 2;
{eutranFreqBandIn
2:
Band 3;
d==10}
3: Band 4;
[4750..4999],
4:
Band 5;
{eutranFreqBandIn
5:
Band 6
d==11}
0..2147483647
6:
Band 7;
[5000..5179],
7:
Band 8;
{eutranFreqBandIn
8:
Band 9;
d==12}
0:
9: Cell
Band 10;
[5180..5279],
Selection/Reselect
10:
Band 11;
{eutranFreqBandIn
ion
11:
Band
12;
d==13}
1:
Handover
12:
Band
13;
[5280..5379],
13:
Band
14;
{eutranFreqBandIn
16:
Band
d==16} 17;
17: Band 18;
[5730..5849],
18:
Band 19;
{eutranFreqBandIn
19:
Band 20;
d==17}
20:
Band 21;
[5850..5999],
22:
Band 23;
{eutranFreqBandIn
23: Band 24;
d==18}
24:
Band 25;
[6000..6149],
32:
Band 33;
{eutranFreqBandIn
33:
Band 34;
d==19}
34:
Band 35;
[6150..6449],
35:
Band 36;
{eutranFreqBandIn
36: Band 37;
d==20}
1..16
37:
Band 38;
[6450..6599],
38:
Band 39;
{eutranFreqBandIn
39:
Band 40;
d==22}
40:
Band 41;
[7500..7699],
41:
Band 42;
{eutranFreqBandIn
42: Band 43;
d==23}
[7700..8039],
{eutranFreqBandIn

positions of Digit for IMSI match.
If a position is set as 1, the digit
of corresponding position
needed to be matched,
otherwise,
ignore
the digit of
This parameter
indicates
corresponding
position
Resource Pool Identifier in CS
UE-Based is supported, RNC will
belong
to the same
resource
This parameter
indicates
pool
Resource Pool Identifier in PS
UE-Based is supported, RNC will
pool
This parameter indicatesEutran
Nbr BlackList Configuration
Profile Object ID
The parameter indicates Ue
state which RNC can configure
the EUTRAN nbr blacklist in
accordance with.
0: Cell Selection/Reselection
1: Handover
The
parameter
the
frequency
bandindicates
of the Eutran.
N_Offs-Dl), where F_DL is center
frequency offset indicated by
Number
of EUTRAN Nbr
band indicator.
blacklist per Freq
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

ID of IMEI black list Information
EUTRAN
Neighboring
Cell
Handover Control
0..503
N/A
RNC
Parameter
0..2147483647
N/A
ZTE UMTS User

Equipment Fault
Aversion FG
0..14
N/A
ZTE UMTS User

Equipment Fault
Aversion FG
0..9
N/A
0: Off
1: On
N/A
0: Off
1: On
N/A

length of IMEI in the blacklist
Rnc
(excluded the last digit Check
Digit).
The
IMEI in blacklist. The value of
each bit is one number from 0 to
9. When ImeiDigit[14] is fully
Rnc
filled, the 14 higher digits of IMEI
are filled. The last digit is check
digit which is not filled in
ImeiDigit[14].
Specifies one of the IMEI using
cases in the IMEI blacklist
RNC
function, i.e., forbidden Uu
periodical quality measurement.
Specifies one of the IMEI using
cases in the IMEI blacklist
function, i.e., forbidden CS
service load balance in RAB
setup procedure.
IMEI utility switch for power
control. When this switch is on,
the power offset parameters
related to the IMEI is effective.
IMEI Utility Extension.

IMEI related offset of uplink
maximum SIR target. For the
UE, whose IMEI is indicated in
UImeiBlkLis and with
imeiPcSwitch
= indicates
1, the uplink
This
parameter
the
maximum
SIR
target
IMEI related
offset
of need
uplinkto add
this
offset.SIR target. For the UE,
minimum
whose IMEI is indicated in
imeiPcSwitch
= indicates
1, the uplink
This
parameter
the
minimum
SIRoffset
targetofneed
to add
IMEI related
downlink
this
offset.
maximum DPCH power. For the
imeiPcSwitch
= indicates
1, the downlink
This
parameter
the
maximum
DPCH
need to
IMEI related
offsetpower
of downlink
add
this offset.
minimum
DPCH power. For the
imeiPcSwitch = 1, the downlink
minimum DPCH power need to
add this offset.
RAN Performance
Monitor
RNC
ZTE UMTS User

Equipment Fault
Aversion FG
Rnc
Power Control
RNC

0..65535
use
Rnc
Power Control
-25.5..25.5, step
0.1
dB
Rnc
Power Control
-25.5..25.5, step
0.1
dB
Rnc
Power Control
-50..50, step 0.1
dB
Rnc
Power Control
-50..50, step 0.1
dB
0: Off
1: On
N/A
N/A

ID of IMEI TAC Subscriber
Profile
Parameter
0..2147483647
N/A

length of IMEI TAC in the feature Rnc
of dedicated priority.
Load Balance
0..6
N/A
This parameter is the IMEI TAC

saved in RNC.
RNC
Load Balance
0..9
N/A

(Distinguish Name) of UDePri.
RNC
Parameter
N/A
N/A

ID of Dedicated Priority
Information
RNC
Parameter
0:
Band 1;
0..2147483647
1: Band 2;
2: Band 3;
3: Band 4;
4: Band 5;
5:
Band 6
1..256
6: Band 7;
7: Band 8;
8: Band 9;
9: Band 10;
10: Band 11;
1..8
11: Band 12;
12: Band 13;
13: Band 14;
16: Band 17;
17: Band 18;
18: Band 19;
19: Band 20;
20: Band 21;
22: Band 23;
23: Band 24;
24:
Band 25;
0..45589
32: Band 33;
33: Band 34;
34: Band 35;
35: Band 36;
36: Band 37;
0..7
37: Band 38;
38: Band 39;
39: Band 40;
40: Band 41;
41: Band 42;
1..8
42: Band 43;
N/A
RNC
This parameter is the subscriber

RNC
profile ID.
Load Balance

number of EUTRAN centre
frequencies
Load Balance
RNC

RNC
The
parameter
the
frequency
bandindicates
of the Eutran.
N_Offs-Dl), where F_DL is center RNC
frequency
offsetindicates
indicatedthe
by
This
parameter
band
indicator.
dedicated
priority of EUTRAN
RNC
freqyency.

number of centre frequencies in
UTRAN.

frequency band of UTRAN.
RNC
RNC
Load Balance
Load Balance
Load Balance
Load Balance
Load Balance
0: Band I
1: Band II
2: Band III
3: Band IV
4: Band V
5: Band VI
7: Band VIII
N/A
N/A
N/A
N/A
N/A
N/A
N/A

occupied downlink carrier central
RNC
channel.
RNC
dedicated priority of UTRAN

number of frequency band in
GSM.
RNC
Load Balance
412..10838
N/A
Load Balance
0..7
N/A
Load Balance
1..4
N/A
0: DCS 1800;
1: PCS 1900;
2: GSM 900;
3: GSM 850

ARFCN GSM cell uses.
RNC
Load Balance

dedicated priority of GSM band.
RNC
Load Balance
0..7
N/A
This parameter is the HSPDSCH measurement power

offset profile object ID.
RNC
Parameter
0..2147483647
N/A
This parameter indicates the ID

of HS-PDSCH Measurement
Power Offset profile.
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
0..65535
N/A
RNC
Parameter
0..2147483647
N/A
UTRAN Cell
Related
Power Control
/HSDPA Packet
Scheduling
0: not Used
1: Used
N/A
UTRAN Cell
Related
Power Control
/HSDPA Packet
Scheduling
0: not Used
1: Used
N/A
UTRAN Cell
Related
Power Control
/HSDPA Packet
Scheduling
0: not Used
1: Used
N/A
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
-6..13, step 0.5
dB
This parameter is the HSPDSCH measurement power

offset configuration object ID.
whether 64QAM function is used
in the configuration of MPO.
MPO should be configured
according to the UE's actual
usage
of 64QAM,
MIMO and
This parameter
indicates
DC-HSDPA.
whether MIMO function is used
in the configuration of MPO.
MPO should be configured
usage
of 64QAM,
MIMO and
This parameter
indicates
DC-HSDPA.
whether DC-HSDPA function is
used in the configuration of
MPO. MPO should be configured
This
parameter
indicates
the
usage
of 64QAM,
MIMO and
assumed
HS-PDSCH
power
DC-HSDPA.
offset relative to P-CPICH/SCPICH power used for CQI
measurement. MPO should be
configured according to the
actual usage of 64QAM, MIMO
and DC-HSDPA.
N/A
Default Value
Related
Parameter
Restriction with
Related
Parameters
Type
Negotiation With
CN
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
PLmnNum of
rncNeInfo,
MCC[8] of
rncNeInfo,
MNCBcdCodeLen
[8] of rncNeInfo,
MNC[8] of
rncNeInfo, NeId[8]
of rncNeInfo
N/A
N/A
MCC[8],
MNCBcdCodeLe
n[8], MNC[8],
NeId[8] is a list.
the max element
number of list is
8. the valid
element number
is PlmNum .
N/A
Fixed
No
SharedNetMode
of rncFunction
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
GpsInfoRoot,
GpsCardType
Only when
GpsInfoRoot set
0 (self) ,
GpsCardType is
valid.
Fixed
No
300
N/A
N/A
Fixed-keep
monitoring
No
600
N/A
N/A
Fixed-keep
monitoring
No
65
N/A
N/A
Fixed-keep
monitoring
No
N/A
0xff
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
124
CMinUlPduSize of CMaxUlPduSize Fixed-keep

rncFunction
> CMinUlPduSize monitoring
No
CMaxUlPduSize
of rncFunction
CMaxUlPduSize Fixed-keep
> CMinUlPduSize monitoring
No
244
NonCMaxUlPduS
NonCMinUlPduSi ize >
Fixed-keep
ze of rncFunction NonCMinUlPduSi monitoring
ze
No
21
NonCMaxUlPduS
NonCMaxUlPduSi ize >
Fixed-keep
ze of rncFunction NonCMinUlPduSi monitoring
ze
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
Yes
N/A
N/A
Fixed-keep
monitoring
Yes
InitRrcOnDch of
rncFunction
When
InitRrcOnDch is
set to 2 (Forced
to FACH) , this
parameter is
invalid.
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
60
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
30
N/A
N/A
Fixed-keep
monitoring
No
30
N/A
N/A
Fixed-keep
monitoring
No
15
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
-13
N/A
N/A
Fixed-keep
monitoring
No
-108
N/A
N/A
Fixed-keep
monitoring
No
1800
N/A
N/A
Fixed
No
44
44
N/A
N/A
The FACH
TOAWS and
PCH TOAWS
TOAWS of FACH MUST be
configured to be
the
Thesame
FACHvalue in
one
CELL.
TOAWE and
PCH TOAWE
TOAWE of FACH MUST be
configured to be
the
Thesame
FACHvalue in
one
CELL.
TOAWS and
PCH TOAWS
TOAWS of PCH MUST be
configured to be
the
Thesame
FACHvalue in
one
CELL.
TOAWE and
PCH TOAWE
TOAWE of PCH MUST be
configured to be
the same value in
one CELL.
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
RxBurstlength of
rncFunction
RxBurstlength<= Fixed-keep
DrxCycleLength monitoring
No
DrxCycleLength
of rncFunction
RxBurstlength<= Fixed-keep
DrxCycleLength monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
30
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
30
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
500
N/A
N/A
Don't Care
No
30
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
50
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
200
N/A
N/A
Fixed
No
50
N/A
N/A
Fixed
No
60
N/A
N/A
Fixed
No
N/A
All the
CnNriBitNum of
single domain
have the same
value
Network
Planing&Optimiz Yes
ation
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
100
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
1280
N/A
N/A
Fixed-keep
monitoring
No
100
N/A
N/A
Fixed-keep
monitoring
No
4000
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
90
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
V3: 240
V4: 1200
N/A
N/A
Fixed
No
V3: 60
V4: 800
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
237
N/A
N/A
Fixed
No
5250
N/A
N/A
Fixed
No
[100, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, N/A
0, 0, 0]
N/A
Network
Planing&Optimiz No
ation
[100, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, N/A
0, 0, 0]
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
300
N/A
N/A
Fixed-keep
monitoring
No
No
No
20
N/A
N/A
Fixed-keep
monitoring
No
20
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
50
N/A
N/A
Fixed-keep
monitoring
No
20
N/A
N/A
Fixed-keep
monitoring
No
40
N/A
N/A
Fixed-keep
monitoring
No
30
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
200
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
200
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Don't Care
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
ArpBronzePc
ArpGoldPc <=
ArpBronzePc
Fixed-keep
monitoring
No
ArpGoldPc
ArpGoldPc <=
ArpBronzePc
Fixed-keep
monitoring
No
0.02
N/A
N/A
Fixed-keep
monitoring
No
0.06
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
0.5
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
200
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
100
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
16
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
N/A
MCC of utranCell,
LAI = MCC +
MNC of utranCell,
MNC + LAC
LAC of utranCell
Network
Planing&Optimiz Yes
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
No
N/A
MCC of utranCell,
RAI = MCC +
MNC of utranCell,
MNC + LAC+
LAC of utranCell,
RAC
RAC of utranCell
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Fixed
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
[512, 0, 955]
[885, 124 , 1023]
[10562, 9662]
[10838, 9938]
N/A
GsmBARangeNu
m of rncFunction,
GsmLRange[32]
of rncFunction,
GsmURange[32]
of
rncFunction
GsmBARangeNu
m of rncFunction,
GsmLRange[32]
of rncFunction,
GsmURange[32]
of
rncFunction
GsmBARangeNu
m of rncFunction,
GsmLRange[32]
of rncFunction,
GsmURange[32]
of
rncFunction
FDDFreqRngNum
of rncFunction,
Luarfcn[8] of
rncFunction,
Uuarfcn[8] of
rncFunction
FDDFreqRngNum
of rncFunction,
Luarfcn[8] of
rncFunction,
Uuarfcn[8] of
rncFunction
FDDFreqRngNum
of rncFunction,
Luarfcn[8] of
rncFunction,
Uuarfcn[8] of
rncFunction
GsmLRange[32]
and
GsmURange[32]
N/A
are both arrays,
GsmLRange[32]
and the
and
maximum array
GsmURange[32]
element number
are
both arrays,
is 32.
and
the
GsmLRange[32]
maximum
array
and
GsmLRange[32]
element
number
GsmURange[32]'
and
is
32.
sGsmURange[32]
effective
GsmLRange[32]
element
are
both number
arrays,
and
is the
and
GsmURange[32]'
GsmBARangeNu
maximum
array
selement
m.effective
number
element
is 32. number
is
GsmLRange[32]
GsmBARangeNu
Luarfcn[8]
and
and
m.
GsmLRange[i]
Uuarfcn[8]
are
GsmURange[32]'
<
GsmURange[i],
both
arrays, and
s effective
i=0..GsmBARang
the
maximum
element
number
Luarfcn[8]
and
eNum-1
array
element
is
Uuarfcn[8]
are
number
is 8.
GsmBARangeNu
both
arrays,
and
Luarfcn[8]
and
m. GsmLRange[i]
the
maximum
Uuarfcn[8]'s
< GsmURange[i],
array
element
effective
element
i=0..GsmBARang
number
is
number
is
Luarfcn[8]
and
eNum-1 8.
Luarfcn[8]
and
FDDFreqRngNu
Uuarfcn[8]
are
Uuarfcn[8]'s
m. arrays, and
both
effective
element
the maximum
number
is
array element
FDDFreqRngNu
number is 8.
m. Luarfcn[i]
<
Luarfcn[8]
and
Uuarfcn[i],
Uuarfcn[8]'s
i=0..FDDFreqRng
effective element
Num-1
number is
FDDFreqRngNu
m. Luarfcn[i] <
Uuarfcn[i],
i=0..FDDFreqRng
Num-1
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
10
N/A
N/A
Fixed
Yes
64
N/A
N/A
Fixed
No
64
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
Except invalid
value (0XFFFF) ,
the parameter
value can't equal
with CsNri that
configured
in
Except invalid
R_IuInfo.
value (0XFFFF) ,
the parameter
value can't equal
with PsNri that
configured in
R_IuInfo.
Network
Planing&Optimiz Yes
ation
0XFFFF
R_IuInfo->-CsNri
0XFFFF
R_IuInfo->-PsNri
[5, 10]
THPThresh [0],
THPThresh [1]
THPThresh [0]<
THPThresh [1]
Fixed-keep
monitoring
Yes
N/A
N/A
Fixed
No
[16, 64, 384]
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[8, 64, 128, 384]
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
Network
Planing&Optimiz Yes
ation
N/A
N/A
When
dchAdjRateSwch
dchAdjRateSwch is set to 0, this
parameter is
invalid.
When
dchAdjRateSwch
dchAdjRateSwch is set to 0, this
parameter is
invalid.
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
32
N/A
N/A
Fixed
No
128
N/A
N/A
Fixed-keep
monitoring
No
128
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
16
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed-keep
monitoring
No
N/A
When
DrbcSwch=0 (Ul
Closed &Dl
Fixed-keep
Closed) , the
monitoring
parameter
DchSig68Swch is
invalid.
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
20
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
255
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
when
UIubLink.UpQos
UIurLink.UpQosM MapType is equal Fixed-keep
apType
to two, the
monitoring
parameter is
valid.-
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
12
N/A
N/A
Fixed-keep
monitoring
No
12
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
No
BasicPrio, all the

in [4, .., in
ARPSeg
MAX_THP_SEG
BasPri must lie in
MENT
[1, .., +3]
corresponding
to
ARPSegNum];
Mapping
THPSeg
in
[1,
..,
TrafficClass
BasicPrio,
alllying
the
MAX_THP_SEG
in [4, .., in
ARPSeg
MENT] in
MAX_THP_SEG
BasPri
must lie in
QosSeg.
MENT
+3]
[1,
..,
and
every
corresponding
to
ARPSegNum];
combination
of..,
THPSeg
in
[1,
TrafficClass
lying
ARPSeg
element
MAX_THP_SEG
in
[4,
..,
in
[1, .., in
MENT]
MAX_THP_SEG
ARPSegNum]
QosSeg.
MENT
+3]
and
TrafficClass
and
every
corresponding
element
mustof to
combination
THPSeg
[1, ..,
have
onein
record
ARPSeg
element
MAX_THP_SEG
in
BasPri.
in
[1, .., in
MENT]
all
these
ARPSegNum]
QosSeg.
requirement
and
TrafficClass
and
every
should
bemust
element
combination
of
guaranteed
by
have
oneelement
record
ARPSeg
operator.
in
in BasPri.
[1, ..,
all
these
ARPSegNum]
N/A
requirement
and TrafficClass
should
elementbemust
guaranteed
by
have one record
operator.
in BasPri.
all these
N/A
requirement
should be
guaranteed by
operator.
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
TrafficClass
ArpPL
THPSeg
14
ArpPL
TrafficClass
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
Yes
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
21
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
No
59
N/A
N/A
Fixed
No
85
HsdpaAcThresh
HsdpaAcThresh
>=
DchDlAcThresh
Fixed-keep
monitoring
No
60
N/A
N/A
Fixed
No
90
DchDlAcThresh
HsdpaAcThresh
>=
DchDlAcThresh
Fixed-keep
monitoring
No
65
threshRefCount
ThreshRefCount
Fixed-keep
<=
monitoring
MbmsAcThresh
No
60
MbmsAcThresh
ThreshRefCount
Fixed-keep
<=
monitoring
MbmsAcThresh
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
460
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
15
N/A
N/A
Network
Planing&Optimiz No
ation
15
N/A
N/A
Network
Planing&Optimiz No
ation
15
N/A
N/A
Network
Planing&Optimiz No
ation
15
N/A
N/A
Network
Planing&Optimiz No
ation
30
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
10
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz Yes
ation
Kcs of UCnInfo,
MbmsModPrdCo
Kps of UCnInfo,
eff>=max (Kcs,
Fixed
MbmsModPrdCoe
Kps)
ff of UCnInfo
Yes
Kcs of UCnInfo,
MbmsModPrdCo
Kps of UCnInfo,
eff>=max (Kcs,
Fixed
MbmsModPrdCoe
Kps)
ff of UCnInfo
Yes
Kcs of CnInfo
Kps of CnInfo
MbmsModPrdCo
Fixed-keep
eff >= max (Kcs,
monitoring
Kps) .
No
N/A
N/A
N/A
No
Fixed
60
N/A
N/A
Fixed-keep
monitoring
Yes
80
N/A
N/A
Fixed-keep
monitoring
Yes
50
N/A
N/A
Don't Care
No
80
N/A
N/A
Fixed-keep
monitoring
Yes
N/A
N/A
Fixed-keep
monitoring
Yes
18
N/A
N/A
Fixed-keep
monitoring
Yes
80
N/A
N/A
Fixed-keep
monitoring
Yes
50
N/A
N/A
Don't Care
Yes
60
TinTR
TigOR<=TinTR
Fixed
Yes
100
TigOR
TigOR<=TinTR
Fixed
Yes
N/A
N/A
Don't Care
Yes
N/A
N/A
Fixed
Yes
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
10
dToFachThd
dToFachThd<=D Fixed-keep
xHsBo0E4bThd monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
1)
dToFachThd<=dT
oPchThd
Fixed-keep
2)
monitoring
dToPchThd<=dTo
IdleThd
No
DToIdleThd,
dToFachThd
fToIdleThd
fToPchThd<=fToI Fixed-keep
dleThd
monitoring
No
DToPchThd
DToPchThd <
DToIdleThd
Fixed-keep
monitoring
No
fToPchThd
;
fToPchThd<=fToI Fixed-keep
dleThd
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
dxHsBo0E4bThd
, dToPchThd
1)
dToFachThd<=D
xHsBo0E4bThd Fixed-keep
2)
monitoring
dToFachThd<=dT
oPchThd
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
16
N/A
N/A
Fixed-keep
monitoring
30
No
10
N/A
Configuration
Note: The
parameter value
Fixed-keep
should not be
monitoring
longer than RAB
response waiting
timer of CN.
N/A
N/A
Fixed
This parameter
must be smaller
than or equal to
the RAB
Fixed-keep
response waiting monitoring
timer length
which is
configured in CN.
Fixed-keep
N/A
monitoring
Yes
Yes
N/A
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
CodeReAssPrd,
CodeReAssHy
10
CodeReAssInd
CodeReAssPrd,
CodeReAssHy
are valid only if
CodeReAssInd is
set to "1:
Support" .
Valid only when
CodeReAssInd is
set to "1:
Support"
Yes
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
12
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
edpcchPOTti2
edpcchPOTti2 >
edpcchPOTti10
Fixed-keep
monitoring
No
edpcchPOTti10
edpcchPOTti2 >
edpcchPOTti10
Fixed-keep
monitoring
No
scheInfoPOTti10
scheInfoPOTti2
Fixed-keep
>=
monitoring
scheInfoPOTti10
No
scheInfoPOTti2
scheInfoPOTti2
Fixed-keep
>=
monitoring
scheInfoPOTti10
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[1, 1, 4]
vsDataDtxDrx: :
dtxCyc2Tti10,
vsDataDtxDrx: :
dtxCyc2Tti2,
CqiRepFactor
N/A
[1, 1, 1]
cqiCycle
N/A
0.05
N/A
1. When
cqiCycle[0] is not
0, the physical
value of
cqiCycle[0] >= 2 *
cqiRepFactor[0].
2. When
cqiCycle[1] is not
0, the physical
value of
cqiCycle[1] >= 2 *
cqiRepFactor[1].
3. When
cqiCycle[2] is not
0, the physical
value of
cqiCycle[2] >= 2 *
cqiRepFactor[2].
4. cqiCycle[0]<=
cqiCycle[1] <=
cqiCycle[2];
5. The results of
vsDataDtxDrx: :
dtxCyc2Tti10 and
vsDataDtxDrx: :
dtxCyc2Tti2 must
be the interger
multilple of
cqiCycle of
dedicated state
or can be
integerly
1. When divided
by it.
cqiCycle[0]
is not
0, the physical
value
N/A of
cqiCycle[0] >= 2 *
cqiRepFactor[0].
2. When
cqiCycle[1] is not
0, the physical
value of
cqiCycle[1] >= 2 *
cqiRepFactor[1].
3. When
cqiCycle[2] is not
N/A
0,
the physical
value of
cqiCycle[2] >= 2 *
cqiRepFactor[2].
Fixed
No
Fixed-keep
monitoring
No
Fixed
No
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
2000
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
3650
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
edpcchPOTti2
edpcchPOTti2 >
edpcchPOTti10
Fixed-keep
monitoring
No
edpcchPOTti10
edpcchPOTti2 >
edpcchPOTti10
Fixed-keep
monitoring
No
scheInfoPOTti10
scheInfoPOTti2
Fixed-keep
>=
monitoring
scheInfoPOTti10
No
scheInfoPOTti2
scheInfoPOTti2
Fixed-keep
>=
monitoring
scheInfoPOTti10
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
[1, 1, 4]
CqiRepFactor
Fixed
No
N/A
Fixed-keep
monitoring
No
[1, 1, 1]
cqiCycle
Fixed
No
N/A
N/A
1. When
cqiCycle[0] is not
0, the physical
value of
cqiCycle[0] >= 2 *
N/A
cqiRepFactor[0].
2. When
cqiCycle[1] is not
0, the physical
value of
cqiCycle[1] >= 2 *
cqiRepFactor[1].
3. When
1.
cqiCycle[2] is not
cqiCycle[0]
0, the physical
value
N/A of
cqiCycle[2]
cqiCycle[0] >= 2 *
cqiRepFactor[2].
cqiRepFactor[0].
4. When
cqiCycle[0]<=
2.
<=not
cqiCycle[1] is
cqiCycle[2];
0,
the physical
value of
cqiCycle[1] >= 2 *
cqiRepFactor[1].
3. When
cqiCycle[2] is not
N/A
0, the physical
value of
cqiCycle[2] >= 2 *
cqiRepFactor[2].
Fixed-keep
monitoring
No
0.05
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2]
N/A
N/A
Fixed
No
[6, 6, 6]
N/A
N/A
Fixed
No
[6, 6, 6]
N/A
N/A
Fixed
No
[3, 3, 3]
N/A
N/A
Fixed
No
[3, 3, 3]
N/A
N/A
Fixed
No
[124, 124, 600]
N/A
N/A
Fixed
No
[21, 21, 45]
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
Fixed-keep
monitoring
12
N/A
[23850, 38800,
64000, 128000,
384000, 768000,
1200000,
3650000,
hsGBRLevNum
7200000,
10100000,
[3,
3.5, 4, 4.5, 5,
14000000,
5.5
, 6, 6.5, 7, 7.5,
21096000]
8, 8.5, 0, 0, 0, 0,
N/A
0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0,
0, 0, 0]
N/A
N/A
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
-7
N/A
N/A
Fixed-keep
monitoring
No
-5
N/A
N/A
Fixed-keep
monitoring
No
hsGBRLev[0]<
hsGBRLev[1]<
hsGBRLev[2]<..<
hsGBRLev[hsGB Fixed-keep
RLevNum-1],
monitoring
where
hsGBRLevNum >
1.
Fixed-keep
N/A
monitoring
No
No
No
No
threshForIsd
threshForHalfIsd Fixed-keep
> threshForIsd
monitoring
No
threshForHalfIsd
threshForHalfIsd Fixed-keep
> ThreshForIsd
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
UHspa: : cqiCycle
UHspa: : cqiCycle
DtxDrxConfigIdx,
DtxCyc1Tti2
DtxDrxConfigIdx,
DtxCyc1Tti10
DtxDrxConfigIdx,
DtxLongPreLegth
DtxDrxConfigIdx,
DtxLongPreLegth
DtxDrxConfigIdx,
DtxCyc2InactTrd2
,
DtxCyc2InactTrd1
0
N/A
DtxCyc2Tti10
in
of DtxCyc1Tti2.
the
same
DpcchBurst1
<=
DtxDrxConfigIdx
DtxCyc1Tti2 in
must
be the
the same
interger
multilple
DtxDrxConfigIdx.
of
DtxCyc1Tti10.
DtxCyc1Tti2
must
DpcchBurst1
be the interger<=
DtxCyc1Tti10
multilple of in
the
same
MacDtxCycTti2
DtxDrxConfigIdx.
or can be
DtxCyc1Tti10
integerly divided
must
thesame
by it inbethe
interger
multilple
DtxDrxConfigIdx.
of
DrxCycle must be
MacDtxCycTti10
the interger must
dtxCyc2Tti2
or
can
multilple
of
be
the be
interger
integerly
DtxCyc1Tti2
or
multilple divided
by
it
in
the
same
can
be
integerly
ofvsDataUHspa: :
DtxDrxConfigIdx.
divided byofit in
cqiCycle
DrxCycle
dtxCyc2Tti10
the same must
dedicated
statebe
the
interger
must
be
the
DtxDrxConfigIdx.
or
can be
multilple
of
interger
integerlymultilple
divided
DtxCyc1Tti10
or
of
by it.
can be integerly:
vsDataUHspa:
divided
cqiCyclebyofit in
the
same state
dedicated
DtxCyc1Tti2
must
DtxDrxConfigIdx.
or
can
be the be
interger
integerly
divided
multilple of
by
it.
MacDtxCycTti2
or can be
DtxCyc1Tti10
integerly divided
must
thesame
by it inbethe
interger
multilple
DtxDrxConfigIdx.
of
MacDtxCycTti10
or can be
integerly
divided
In the same
by
it
in
the
same
DtxDrxConfigIdx,
DtxDrxConfigIdx.
when
DtxLongPreLegth
is 4 or 15,
DtxCyc2InactTrd
In the same
2
>= 8 TTIs
DtxDrxConfigIdx,
when
DtxLongPreLegth
is
or same
15,
In 4the
DtxCyc2InactTrd
DtxDrxConfigIdx,
10
>= 4 TTIs
when
DtxLongPreLegth
is 4 or 15,
DtxCyc2InactTrd
2 >= 8 TTIs,
DtxCyc2InactTrd
10 >= 4 TTIs
N/A
N/A
N/A
Fixed
No
In the same
DtxDrxConfigIdx, DtxDrxConfigIdx,
DtxDDtxCyc1Tti1 DpcchBurst1 <= Fixed
0, DtxCyc1Tti2
DtxCyc1Tti10 or
DtxCyc1Tti2
No
DtxDrxConfigIdx,
DtxCyc2Tti2,
DpcchBurst1,
MacDtxCycTti2,
DrxCycle
DtxDrxConfigIdx,
DtxCyc2Tti10,
DpcchBurst1,
MacDtxCycTti10,
DrxCycle
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
DtxDrxConfigIdx,
DtxCyc2Tti10,
DtxCyc2Tti2
In the same
DtxDrxConfigIdx,
DpcchBurst2 <= Fixed
DtxCyc2Tti10 or
DtxCyc2Tti2
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
2]
<=
ulSirTargDnStep[
services,
MaxSirTargUpSte
1]
<=
ulSirTargDnStep[
p[2];
maxSirTargDnSte
0]
<=
UlSirTargUpStep[
p[1];
maxSirTargDnSte
3]
<=
ulSirTargDnStep[
p[0];
For
uplink
MaxSirTargUpSte
2]
<=
ulSirTargDnStep[
services:
p[3];
maxSirTargDnSte
[0.3, 0.3, 0.3, 0.3, srvType,
1]
<=
UlSirTargUpStep[
0.3, 0.3, 0.3, 0.3, MaxSirTargUpSte p[2];
maxSirTargDnSte
0]
<=
4]
ulSirTargDnStep[
0.3]
p
p[1];
MaxSirTargUpSte
3]
<=
ulSirTargDnStep[
p[0];
p[4];
maxSirTargDnSte
2]
<=
UlSirTargUpStep[
p[3];
maxSirTargDnSte
[0.1, 0.1, 0.1, 0.1, srvType,
1]
<=
5]
ulSirTargDnStep[
0.1, 0.1, 0.1, 0.1, maxSirTargDnSte p[2];
MaxSirTargUpSte
4]
<=
ulSirTargDnStep[
0.1]
p
p[1];
p[5];
maxSirTargDnSte
3]
<=
UlSirTargUpStep[
p[4];
maxSirTargDnSte
2]
6]
<=
ulSirTargDnStep[
p[3];
MaxSirTargUpSte
[0.6, 0.6, 0.6, 0.6,
5]
<=
srvType,
ulSirTargDnStep[
p[2];
p[6];
0.6, 0.6, 0.6, 0.6,
maxSirTargDnSte
ulSirTargDnStep 4]
<=
UlSirTargUpStep[
0.6]
p[5];
maxSirTargDnSte
3]
<=
7]
ulSirTargDnStep[
p[4];
MaxSirTargUpSte
6]
<=
ulSirTargDnStep[
p[3];
p[7];
maxSirTargDnSte
[0.6, 0.6, 0.6, 0.6,
5]
<=
SrvType,
UlSirTargUpStep[
p[6];
0.6, 0.6, 0.6, 0.6,
maxSirTargDnSte
UlSirTargUpStep 4]
<=
8]
ulSirTargDnStep[
0.6]
p[5];
MaxSirTargUpSte
7]
<=
ulSirTargDnStep[
p[4];
p[8]
maxSirTargDnSte
6]
<=
UlSirTargUpStep[
p[7];
maxSirTargDnSte
5]
<=
For
uplink
ulSirTargDnStep[
p[6];
0.5
N/A
N/A
MaxSirTargUpSte
services:
8]
<=
ulSirTargDnStep[
p[5];
nhrThrDownTti10
maxSirTargDnSte
7]
<=
UlSirTargUpStep[
[0]
<=
p[8].
maxSirTargDnSte
6]
<=
nhrThrUpTti10[0];
p[7];
MaxSirTargUpSte
nhrThrDownTti10
For
uplink
[43, 43, 43, 43,
ulSirTargDnStep[
p[6];
N/A
N/A
[1]
<=
services:
43, 43, 43, 43, 43]
8]
<=
UlSirTargUpStep[
nhrThrUpTti10[1];
nhrThrDownTti10
maxSirTargDnSte
7]
<=
nhrThrDownTti10
[0]
<=
p[8].
MaxSirTargUpSte
[2]
<=
nhrThrUpTti10[0];
p[7];
nhrThrUpTti10[2];
nhrThrDownTti10
[1, 1, 1, 1, 1, 1, 1,
UlSirTargUpStep[
nhrThrDownTti10
N/A
N/A<=
[1]
1, 1]
8]
<=
[3]
<=
nhrThrUpTti10[1];
MaxSirTargUpSte
nhrThrUpTti10[3];
nhrThrDownTti10
p[8].
nhrThrDownTti10
[2] <=
[4]
<=
nhrThrUpTti10[2];
[200, 200, 200,
nhrThrUpTti10[4];
nhrThrDownTti10
200, 200, 200,
N/A
N/A
nhrThrDownTti10
[3] <=
200, 200, 200]
[5]
<=
nhrThrUpTti10[3];
nhrThrUpTti10[5];
nhrThrDownTti10
nhrThrDownTti10
[4] <=
[6]
<=
nhrThrUpTti10[4];
[2, 2, 2, 2, 2, 2, 2,
N/A
N/A
nhrThrUpTti10[6];
nhrThrDownTti10
2, 2]
nhrThrDownTti10
[5] <=
[7]
<=
nhrThrUpTti10[5];
nhrThrUpTti10[7];
nhrThrDownTti10
nhrThrDownTti10
[6] <=
[2, 2, 2, 2, 2, 2, 2,
[8]
<=
N/A
N/A
nhrThrUpTti10[6];
2, 2]
nhrThrUpTti10[8];
nhrThrDownTti10
[7] <=
NhrThrUpTti10
nhrThrUpTti10[7];
[0]<=
nhrThrDownTti10
[0.03, 0.03, 0.03,
nhrThrDownTti10, NhrThrUpTti10
[8] <=
0.03, 0.03, 0.03,
srvType
[1]<=
nhrThrUpTti10[8];
0.3, 0.3, 0.3]
NhrThrUpTti10
[2];
NhrThrDownTti10
NhrThrUpTti10
[0]<=
[0.01, 0.01, 0.01,
[3]<=
nhrThrUpTti10,
NhrThrDownTti10
0.01, 0.01, 0.01,
NhrThrUpTti10
srvType
[1]<=
0.1, 0.1, 0.1]
[4]<=
NhrThrDownTti10
NhrThrUpTti10
[2];
[5];
NhrThrDownTti10
NhrThrUpTti10
[3]<=
[6]<=
NhrThrDownTti10
NhrThrUpTti10
[4]<=
[7]<=
NhrThrDownTti10
NhrThrUpTti10
Fixed
No
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
[0.03, 0.03, 0.03,

0.3, 0.3, 0.3, 0.6,
0.6, 0.6]
nhrThrDownTti2,
srvType
[0.01, 0.01, 0.01,

0.1, 0.1, 0.1, 0.4,
0.4, 0.4]
nhrThrUpTti2,
srvType
[4, 4, 4, 4, 4, 4, 4,
N/A
4, 4]
[32, 32, 32, 16,

N/A
16, 16, 16, 16, 16]
[4, 4, 4, 4, 4, 4, 4,
N/A
4, 4]
[32, 32, 32, 16,

N/A
16, 16, 16, 16, 16]
N/A
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
nhrThrUpTti2[6];
nhrThrDownTti2[
nhrThrDownTti2[
6] <=
7]
<=
nhrThrUpTti2[6];
nhrThrUpTti2[7];
nhrThrDownTti2[
nhrThrDownTti2[
7] <=
8]
<=
nhrThrUpTti2[7];
nhrThrUpTti2[8];
nhrThrDownTti2[
8] <=
NhrThrUpTti2
nhrThrUpTti2[8];
[0]<=
NhrThrUpTti2
NhrThrDownTti2
[1]<=
[0]<=
NhrThrUpTti2
[2];
NhrThrDownTti2
NhrThrUpTti2
[1]<=
[3]<=
NhrThrDownTti2
NhrThrUpTti2
[2];
[4]<=
NhrThrDownTti2
NhrThrUpTti2
[5];
[3]<=
NhrThrUpTti2
N/A
NhrThrDownTti2
[6]<=
[4]<=
NhrThrUpTti2
NhrThrDownTti2
[7]<=
[5];
NhrThrUpTti2
[8];
NhrThrDownTti2
NhrThrUpTti2
[6]<=
N/A
[0]<=
NhrThrDownTti2
NhrThrUpTti2
[7]<=
[3]<=
NhrThrDownTti2
NhrThrUpTti2 [6];
[8];
NhrThrUpTti2
NhrThrDownTti2
N/A
[1]<=
[0]<=
NhrThrUpTti2
NhrThrDownTti2
[4]<=
[3]<=
NhrThrUpTti2
[7];
NhrThrDownTti2
NhrThrUpTti2
[6];
[2]<=
N/A
NhrThrDownTti2
NhrThrUpTti2
[1]<=
[5]<=
NhrThrDownTti2
NhrThrUpTti2
[8].
[4]<=
NhrThrDownTti2
[7];
N/A
NhrThrDownTti2
[2]<=
NhrThrDownTti2
[5]<=
NhrThrDownTti2
N/A
[8].
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
Don't Care
No
Fixed-keep
monitoring
No
[3, 3, 3, 3, 3, 3, 3,
N/A
3, 3]
N/A
Fixed
No
N/A
N/A
Don't Care
No
10
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
Fixed-keep
monitoring
No
95
minBerTarget
maxBerTarget >=
Don't Care
minBerTarget
No
maxBerTarget
maxBerTarget >=
Don't Care
minBerTarget
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
Fixed
No
[6, 6, 6, 6, 6, 6, 6,
N/A
6, 6]
N/A
Fixed
No
2:24:00 AM
N/A
N/A
Fixed-keep
monitoring
No
[0.3, 0.3, 0.3, 0.3,

0.3, 0.3, 0.3, 0.3, N/A
0.3]
N/A
Fixed-keep
monitoring
No
[0.1, 0.1, 0.1, 0.1,

0.1, 0.1, 0.1, 0.1, N/A
0.1]
N/A
Fixed-keep
monitoring
No
[0.3, 0.3, 0.3, 0.3,

0.3, 0.3, 0.3, 0.3, N/A
0.3]
N/A
Fixed-keep
monitoring
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
Fixed-keep
monitoring
No
[10, 10, 10, 10,

N/A
10, 10, 10, 10, 10]
N/A
Fixed-keep
monitoring
No
[1, 1, 1, 1, 1, 1, 1,
N/A
1, 1]
[100, 100, 100,

100, 100, 100,
100, 100, 100]
BerTargetDnThres
[0, 0, 0, 0, 0, 0, 0,
BerTargetUpThres
0, 0]
services:
BerTargetDnThre
s[0]<=BerTargetU
pThres[0];
BerTargetDnThre
For uplink
s[1]<=BerTargetU
services:
pThres[1];
BerTargetDnThre
BerTargetDnThre
s[0]<=BerTargetU
N/A
s[2]<=BerTargetU
pThres[0];
pThres[2];
BerTargetDnThre
BerTargetDnThre
s[1]<=BerTargetU
s[3]<=BerTargetU
pThres[1];
pThres[3];
BerTargetDnThre
BerTargetDnThre
s[2]<=BerTargetU
s[4]<=BerTargetU
pThres[2];
pThres[4];
BerTargetDnThre
BerTargetDnThre
s[3]<=BerTargetU
s[5]<=BerTargetU
pThres[3];
pThres[5];
BerTargetDnThre
BerTargetDnThre
s[4]<=BerTargetU
s[6]<=BerTargetU
pThres[4];
pThres[6];
BerTargetDnThre
BerTargetDnThre
s[5]<=BerTargetU
s[7]<=BerTargetU
pThres[5];
N/A
pThres[7];
BerTargetDnThre
BerTargetDnThre
s[6]<=BerTargetU
s[8]<=BerTargetU
pThres[6];
For
uplink
pThres[8];
BerTargetDnThre
services:
s[7]<=BerTargetU
TtiNumThreshOp
pThres[7];
en<=TtiNumThre
BerTargetDnThre
shCls;
s[8]<=BerTargetU
For uplink
pThres[8];
services:
TtiNumThreshOp
en<=TtiNumThre
shCls;
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
12:00:00 AM
N/A
12:00:00 AM
TtiNumThreshCls
12:00:00 AM
TtiNumThreshOp
en
12:00:00 AM
N/A
N/A
Fixed-keep
monitoring
No
12:00:00 AM
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
[0.3, 0.3, 0.3]
[0.1, 0.1, 0.1]
For uplink
services:
N/A
Fixed
UlSirTargUpStep[
0] <=
MaxSirTargUpSte
SrvType of
p[0];
For uplink
WhiteTrfPc,
UlSirTargUpStep[
services:
Fixed
MaxSirTargUpSte 1]
<=
UlSirTargDnStep[
p of WhiteTrfPc; 0]<=
MaxSirTargUpSte
p[1];
MaxSirTargDnSte
UlSirTargUpStep[
SrvType of
p[0];
2]
<=
WhiteTrfPc,
UlSirTargDnStep[
Fixed
MaxSirTargUpSte
MaxSirTargDnSte 1]<=
p[2].
p of WhiteTrfPc
MaxSirTargDnSte
p[1];
UlSirTargDnStep[
2]<=
MaxSirTargDnSte
p[2].
No
No
No
[0.6, 0.6, 0.6]
[0.6, 0.6, 0.6]
[0, 0, 0]
[-35, -35, -35]
[-35, -35, -35]
[3, 3, 3]
[33, 33, 33]
For uplink
services:
UlSirTargDnStep[
0]<=
MaxSirTargDnSte
SrvType of
p[0];
For uplink
WhiteTrfPc,
UlSirTargDnStep[
services:
UlSirTargDnStep 1]<=
UlSirTargUpStep[
of WhiteTrfPc
MaxSirTargDnSte
0]
<=
p[1];
MaxSirTargUpSte
UlSirTargDnStep[
SrvType of
p[0];
2]<=
WhiteTrfPc,
UlSirTargUpStep[
UlSirTargUpStep MaxSirTargDnSte
1] <=
p[2].
of WhiteTrfPc
MaxSirTargUpSte
p[1];
UlSirTargUpStep[
For
downlink
2] <=
services:
N/A
N/A
MaxSirTargUpSte
MaxDlDpchPwr[0
p[2].
]>=
MinDlDpchPwr[0]
SrvType of
;For downlink
WhiteTrfPc,
MaxDlDpchPwr[1
services:
MinDlDpchPwr of ]>=
MaxDlDpchPwr[0
WhiteTrfPc
MinDlDpchPwr[1]
]>=
;MinDlDpchPwr[0]
MaxDlDpchPwr[2
SrvType of
;
]>=
WhiteTrfPc,
MaxDlDpchPwr[1
MaxDlDpchPwr of MinDlDpchPwr[2]
]>=
.MinDlDpchPwr[1]
WhiteTrfPc
;
MaxDlDpchPwr[2
]>=
N/A
N/A
MinDlDpchPwr[2]
.
[43, 43, 43]
N/A
N/A
For uplink
services:
ulMaxSIR[0]>ulIni
tSIR[0]>ulMinSIR
[0];
ulMaxSIR[1]>ulIni
For uplink
tSIR[1]>ulMinSIR
services:
[1];
ulMaxSIR[0]>ulIni
ulMaxSIR[2]>ulIni
tSIR[0]>ulMinSIR
tSIR[2]>ulMinSIR
[0];
[2].
ulMaxSIR[1]>ulIni
For uplink
tSIR[1]>ulMinSIR
services:
[1];
ulMaxSIR[0]>ulIni
ulMaxSIR[2]>ulIni
tSIR[0]>ulMinSIR
tSIR[2]>ulMinSIR
[0];
[2].
ulMaxSIR[1]>ulIni
tSIR[1]>ulMinSIR
[1];
ulMaxSIR[2]>ulIni
tSIR[2]>ulMinSIR
[2].
N/A
[1, 1, 1]
N/A
N/A
[5, 5, 5]
[15, 15, 15]
[2, 2, 2]
N/A
SrvType of
WhiteTrfPc,
ULMaxSIR of
WhiteTrfPc,
ULMinSIR of
WhiteTrfPc
SrvType of
WhiteTrfPc,
ULInitSIR of
WhiteTrfPc,
ULMinSIR of
WhiteTrfPc
SrvType of
WhiteTrfPc,
ULInitSIR of
WhiteTrfPc,
ULMaxSIR of
WhiteTrfPc
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
[200, 200, 200]
N/A
N/A
Fixed
No
[2, 2, 2]
N/A
Fixed
No
[2, 2, 2]
N/A
N/A
1.For uplink
services:
nhrThrDownTti10
[0]<=
nhrThrDownTti10
[1]<=
N/A
1.For
uplink
nhrThrDownTti10
services:
[2].
NhrThrUpTti10[0]
2.For uplink
<=
services:
NhrThrUpTti10[1]
<=
nhrThrDownTti10
NhrThrUpTti10[2]
[0] <=
.nhrThrUpTti10[0],
2.For uplink
services:
nhrThrDownTti10
NhrThrDownTti10
[1] <=
[0]
<=
nhrThrUpTti10[1],
NhrThrUpTti10[0]
nhrThrDownTti10
NhrThrDownTti10
[2] <=
[1]
nhrThrUpTti10[2].
N/A<=
NhrThrUpTti10[1]
1.For uplink
services:
NhrThrDownTti10
NhrThrDownTti2[
[2]
<=
0] <=
NhrThrUpTti10[2]
NhrThrDownTti2[
N/A
.1] <=
1.For
uplink
NhrThrDownTti2[
services:
2]
NhrThrUpTti2[0]
2.For uplink
<=
services:
NhrThrUpTti2[1]
NhrThrDownTti2[
<=
0] <=
NhrThrUpTti2[2]
NhrThrUpTti2[0]
2.For uplink
services:
NhrThrDownTti2[
NhrThrDownTti2[
1] <=
0]
<=
NhrThrUpTti2[1]
NhrThrUpTti2[0]
NhrThrDownTti2[
NhrThrDownTti2[
2] <=
1]
<=
NhrThrUpTti2[2].
N/A
NhrThrUpTti2[1]
Fixed
No
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
Fixed
No
No
No
[0.01, 0.01, 0.1]
[0.03, 0.03, 0.3]
SrvType of
WhiteTrfPc,
NhrThrUpTti10[]
of WhiteTrfPc,
NhrThrDownTti10[
]SrvType
of WhiteTrfPc
of
WhiteTrfPc,
NhrThrUpTti10[]
of WhiteTrfPc,
NhrThrDownTti10[
] of WhiteTrfPc
[4, 4, 4]
N/A
[32, 16, 16]
N/A
[0.01, 0.1, 0.4]
[0.03, 0.3, 0.6]
[4, 4, 4]
SrvType of
WhiteTrfPc,
NhrThrUpTti2[] of
WhiteTrfPc,
NhrThrDownTti2[]
of
WhiteTrfPc
SrvType
of
WhiteTrfPc,
NhrThrUpTti2[] of
WhiteTrfPc,
NhrThrDownTti2[]
of WhiteTrfPc
N/A
[32, 16, 16]
N/A
NhrThrDownTti2[
2] <=
NhrThrUpTti2[2].
N/A
Fixed
[0, 0, 0]
N/A
N/A
Fixed
[0, 0, 0]
N/A
N/A
Fixed-keep
monitoring
No
[3, 3, 3]
N/A
N/A
Fixed
No
[6, 6, 6]
N/A
N/A
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
For uplink
service:
N/A
ulMinSIR[0]<=init
BlerSIR[0]+initSir
Add[0]<=ulMaxSI
R[0];
For uplink
ulMinSIR[1]<=init
service:
BlerSIR[1]+initSir
ulMinSIR[0]<=init
Add[1]<=ulMaxSI
BlerSIR[0]+initSir
R[1];
Add[0]<=ulMaxSI
ulMinSIR[2]<=init
R[0];
BlerSIR[2]+initSir
ulMinSIR[1]<=init
Add[2]<=ulMaxSI
BlerSIR[1]+initSir
R[2]
Add[1]<=ulMaxSI
R[1];
ulMinSIR[2]<=init
BlerSIR[2]+initSir
Add[2]<=ulMaxSI
N/A
R[2]
2:24:00 AM
N/A
[1, 1, 1]
ulMinSIR,
ulMaxSIR
[4, 4, 4]
ulMinSIR,
ulMaxSIR
[0.3, 0.3, 0.3]
N/A
[0.1, 0.1, 0.1]
N/A
N/A
Fixed-keep
monitoring
No
[0.3, 0.3, 0.3]
N/A
N/A
Fixed-keep
monitoring
No
[0, 0, 0]
N/A
N/A
Fixed-keep
monitoring
No
[10, 10, 10]
N/A
N/A
Fixed-keep
monitoring
No
[1, 1, 1]
N/A
N/A
Fixed-keep
monitoring
No
For uplink
services:
BerTargetDnThre
s[0]<=BerTargetU
pThres[0];
BerTargetDnThre
BerTargetDnThres For uplink
s[1]<=BerTargetU
services:
pThres[1];
BerTargetDnThre
BerTargetDnThre
s[0]<=BerTargetU
s[2]<=BerTargetU
pThres[0];
pThres[2];
BerTargetDnThre
BerTargetUpThres
s[1]<=BerTargetU
pThres[1];
BerTargetDnThre
s[2]<=BerTargetU
pThres[2];
N/A
N/A
N/A
N/A
N/A
[100, 100, 100]
[0, 0, 0]
[-35, -35, -35, -35, minDlDpchPwr,

-35, -35, -35, -35, srvType of
-35]
vsDataSrvPc
[-35, -35, -35, -35, maxDlDpchPwr,

-35, -35, -35, -35, srvType of
-35]
vsDataSrvPc
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
For downlink
N/A
services,
maxDlDpchPwr[0
]>=minDlDpchPw
r[0];
maxDlDpchPwr[1
]>=minDlDpchPw
r[1];
maxDlDpchPwr[2
]>=minDlDpchPw
r[2];
maxDlDpchPwr[3
]>=minDlDpchPw
r[3];
For downlink
maxDlDpchPwr[4
services,
]>=minDlDpchPw
maxDlDpchPwr[0
r[4];
]>=minDlDpchPw
maxDlDpchPwr[5
r[0];
]>=minDlDpchPw
maxDlDpchPwr[1
r[5];
]>=minDlDpchPw
maxDlDpchPwr[6
r[1];
]>=minDlDpchPw
maxDlDpchPwr[2
r[6];
]>=minDlDpchPw
maxDlDpchPwr[7
r[2];
]>=minDlDpchPw
maxDlDpchPwr[3
r[7];
]>=minDlDpchPw
maxDlDpchPwr[8
r[3];
]>=minDlDpchPw
maxDlDpchPwr[4
r[8].
]>=minDlDpchPw
r[4];
maxDlDpchPwr[5
]>=minDlDpchPw
r[5];
N/A
maxDlDpchPwr[6
]>=minDlDpchPw
r[6];
maxDlDpchPwr[7
]>=minDlDpchPw
N/A
r[7];
maxDlDpchPwr[8
]>=minDlDpchPw
r[8].
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
Fixed-keep
monitoring
No
[3, 3, 3, 3, 3, 3, 3,
N/A
3, 3]
N/A
Fixed-keep
monitoring
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
For uplink
services,
ulMaxSIR[0]>ulIni
tSIR[0]>ulMinSIR
[0];
ulMaxSIR[1]>ulIni
tSIR[1]>ulMinSIR
[1];
ulMaxSIR[2]>ulIni
tSIR[2]>ulMinSIR
[2];
[33, 33, 33, 33,
N/A
N/A
ulMaxSIR[3]>ulIni
33, 33, 33, 33, 33]
tSIR[3]>ulMinSIR
For uplink
[3];
services,
ulMaxSIR,
[5, 5, 5, 5, 5, 5, 5,
ulMaxSIR[4]>ulIni
ulMinSIR, srvType ulMaxSIR[0]>ulIni
5, 5]
tSIR[4]>ulMinSIR
tSIR[0]>ulMinSIR
of vsDataSrvPc
[4];
[0];
ulMaxSIR[5]>ulIni
ulMaxSIR[1]>ulIni
tSIR[5]>ulMinSIR
tSIR[1]>ulMinSIR
[5];
[1];
ulMaxSIR[6]>ulIni
ulMaxSIR[2]>ulIni
tSIR[6]>ulMinSIR
tSIR[2]>ulMinSIR
[6];
[2];
ulMaxSIR[7]>ulIni
ulMaxSIR[3]>ulIni
tSIR[7]>ulMinSIR
tSIR[3]>ulMinSIR
[7];
[3];
For
uplink
ulInitSIR,
ulMaxSIR[8]>ulIni
[15, 15, 15, 15,
ulMaxSIR[4]>ulIni
ulMinSIR, srvType services,
tSIR[8]>ulMinSIR
15, 15, 15, 15, 15]
tSIR[4]>ulMinSIR
ulMaxSIR[0]>ulIni
of vsDataSrvPc
[8].
[4];
tSIR[0]>ulMinSIR
ulMaxSIR[5]>ulIni
[0];
tSIR[5]>ulMinSIR
ulMaxSIR[1]>ulIni
[5];
tSIR[1]>ulMinSIR
ulMaxSIR[6]>ulIni
[1];
tSIR[6]>ulMinSIR
ulMaxSIR[2]>ulIni
[6];
tSIR[2]>ulMinSIR
ulMaxSIR[7]>ulIni
[2];
tSIR[7]>ulMinSIR
ulMaxSIR[3]>ulIni
[7];
tSIR[3]>ulMinSIR
ulMaxSIR[8]>ulIni
ulInitSIR,
[3];
tSIR[8]>ulMinSIR
[2, 2, 2, 2, 2, 2, 2, ulMaxSIR,
ulMaxSIR[4]>ulIni
[8].
2, 2]
srvType of
tSIR[4]>ulMinSIR
vsDataSrvPc
[4];
ulMaxSIR[5]>ulIni
tSIR[5]>ulMinSIR
[5];
ulMaxSIR[6]>ulIni
tSIR[6]>ulMinSIR
[6];
ulMaxSIR[7]>ulIni
-2
eagchPOTti10,
srvType of
vsDataSrvPc
For downlink
services,
Fixed-keep
eagchPOTti2>ea monitoring
gchPOTti10
No
-9
eagchPOTti2,
srvType of
vsDataSrvPc
For downlink
services,
Fixed-keep
eagchPOTti2>ea monitoring
gchPOTti10
No
-3
ergchPOTti10,
srvType of
vsDataSrvPc
For downlink
services,
Fixed-keep
ergchPOTti2>erg monitoring
chPOTti10
No
-9
ergchPOTti2,
srvType of
vsDataSrvPc
For downlink
services,
Fixed-keep
ergchPOTti2>erg monitoring
chPOTti10
No
-3
ehichPOTti10,
srvType of
vsDataSrvPc
-9
ehichPOTti2,
srvType of
vsDataSrvPc
N/A
-3
N/A
[1, 1, 1, 1, 1, 1, 1, ulMinSIR,
1, 1]
ulMaxSIR
[4, 4, 4, 4, 4, 4, 4, ulMinSIR,
4, 4]
ulMaxSIR
N/A
N/A
N/A
N/A
For downlink
services,
ehichPOTti2>ehi
chPOTti10
For uplink
service:
For downlink
ulMinSIR[0]<=init
services,
BlerSIR[0]+initSir
ehichPOTti2>ehi
Add[0]<=ulMaxSI
chPOTti10
R[0];
For uplink
ulMinSIR[1]<=init
service:
BlerSIR[1]+initSir
ulMinSIR[0]<=init
N/A
Add[1]<=ulMaxSI
BlerSIR[0]+initSir
R[1];
Add[0]<=ulMaxSI
ulMinSIR[2]<=init
R[0];
BlerSIR[2]+initSir
ulMinSIR[1]<=init
Add[2]<=ulMaxSI
BlerSIR[1]+initSir
R[2];
N/A
Add[1]<=ulMaxSI
ulMinSIR[3]<=init
R[1];
BlerSIR[3]+initSir
ulMinSIR[2]<=init
Add[3]<=ulMaxSI
BlerSIR[2]+initSir
R[3];
Add[2]<=ulMaxSI
ulMinSIR[4]<=init
R[2];
BlerSIR[4]+initSir
ulMinSIR[3]<=init
Add[4]<=ulMaxSI
BlerSIR[3]+initSir
R[4];
Add[3]<=ulMaxSI
ulMinSIR[5]<=init
R[3];
BlerSIR[5]+initSir
ulMinSIR[4]<=init
Add[5]<=ulMaxSI
BlerSIR[4]+initSir
R[5];
Add[4]<=ulMaxSI
ulMinSIR[6]<=init
R[4];
BlerSIR[6]+initSir
ulMinSIR[5]<=init
Add[6]<=ulMaxSI
BlerSIR[5]+initSir
R[6];
N/A
Add[5]<=ulMaxSI
ulMinSIR[7]<=init
R[5];
BlerSIR[7]+initSir
ulMinSIR[6]<=init
Add[7]<=ulMaxSI
BlerSIR[6]+initSir
R[7];
Add[6]<=ulMaxSI
ulMinSIR[8]<=init
R[6];
N/A
BlerSIR[8]+initSir
ulMinSIR[7]<=init
Add[8]<=ulMaxSI
BlerSIR[7]+initSir
R[8]
Add[7]<=ulMaxSI
R[7];
ulMinSIR[8]<=init
BlerSIR[8]+initSir
Add[8]<=ulMaxSI
R[8]
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
20
HsSharMethod
Valid only when

HsSharMethod is Fixed-keep
set to "RNC
monitoring
Control"
No
N/A
N/A
Fixed
No
300
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
600
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
CeShareSwitch
N/A
N/A
N/A
Fixed
if
CeShareSwitch=
0, this parameter
is invalid; else,
the value sum of Fixed
this parameter in
the same nodeb
is equal or less
than 100%.
Fixed-keep
N/A
monitoring
N/A
when
UIubLink.UpQos
UIubLink.UpQosM MapType is equal Fixed-keep
apType
to two, the
monitoring
parameter is
valid.-
N/A
N/A
N/A
N/A
URANum of
UUtranCellFDD,
URA[4] of
UUtranCellFDD
URA[4] is a list.
the max element
Network
number of list is
Planing&Optimiz No
4. the valid
ation
element number
is URANum .
No
No
No
No
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[5, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 14]
N/A
N/A
Fixed-keep
monitoring
No
[4, 2]
N/A
N/A
Fixed-keep
monitoring
No
[0, 0]
N/A
N/A
Fixed
No
[0, 0]
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[5, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 14]
N/A
N/A
Fixed-keep
monitoring
No
[4, 2]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[3, 0]
N/A
N/A
Fixed-keep
monitoring
No
[4, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 0]
N/A
N/A
Fixed-keep
monitoring
No
[6, 2]
N/A
N/A
Fixed-keep
monitoring
No
[8, 2]
N/A
N/A
Fixed-keep
monitoring
No
[8, 3]
N/A
N/A
Fixed-keep
monitoring
No
[12, 4]
N/A
N/A
Fixed-keep
monitoring
No
[11, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[4, 1]
N/A
N/A
Fixed-keep
monitoring
No
[4, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 1]
N/A
N/A
Fixed-keep
monitoring
No
[7, 1]
N/A
N/A
Fixed-keep
monitoring
No
[7, 3]
N/A
N/A
Fixed-keep
monitoring
No
[8, 5]
N/A
N/A
Fixed-keep
monitoring
No
[12, 4]
N/A
N/A
Fixed-keep
monitoring
No
[11, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[13, 5]
N/A
N/A
Fixed-keep
monitoring
No
[14, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[11, 0]
N/A
N/A
Fixed-keep
monitoring
No
[14, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[8, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[1500, 700]
N/A
N/A
Fixed-keep
monitoring
No
[14, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[8, 0]
N/A
N/A
Fixed-keep
monitoring
No
[14, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[8, 0]
N/A
N/A
Fixed-keep
monitoring
No
[5, 14]
N/A
N/A
Fixed-keep
monitoring
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1]
N/A
N/A
Fixed
No
[3, 4]
N/A
N/A
Fixed-keep
monitoring
No
[14, 14]
N/A
N/A
Fixed-keep
monitoring
No
[128, 16]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 1, 2, 3, 4, 5, 6] N/A
N/A
Network
Planing&Optimiz No
ation
[3, 5, 0, 0, 0, 0, 0] N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0, 0.0]
N/A
Fixed
[0, 0, 4, 4, 2, 2, 4] N/A
N/A
Network
Planing&Optimiz No
ation
[-24, -24, -24, -24,

N/A
-12, -20, -24]
N/A
Fixed
No
[2, 0, 0, 0, 0, 0, 0] N/A
N/A
Fixed-keep
monitoring
No
No
When MeaEvtId
[0, 0, 3, 0, 0, 0, 3] meaEvtId of Intra is 1J, rplcActThr Fixed
is 0, 1, 2, 3, or 4.
No
[9, 12, 11, 11, 9, 9,

N/A
11]
N/A
Network
Planing&Optimiz No
ation
[2, 2, 2, 7, 7, 7, 2] N/A
N/A
Fixed
No
[4, 4, 4, 2, 2, 2, 4] N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 1, 2, 3, 4, 5, 6] N/A
N/A
Network
Planing&Optimiz No
ation
[6, 8, 0, 0, 0, 0, 0] N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0, 0.0]
N/A
Fixed
[4, 4, 6, 6, 4, 4, 6] N/A
N/A
Network
Planing&Optimiz No
ation
[-115, -115, -115,

-115, -80, -97,
-115]
N/A
Fixed
N/A
No
No
[2, 0, 0, 0, 0, 0, 0] N/A
N/A
Fixed-keep
monitoring
When MeaEvtId
[0, 0, 3, 0, 0, 0, 3] meaEvtId of Intra is 1J, rplcActThr Fixed
is 0, 1, 2, 3, or 4.
No
No
[9, 9, 9, 9, 9, 9, 9] N/A
N/A
Network
Planing&Optimiz No
ation
[2, 2, 2, 7, 7, 7, 2] N/A
N/A
Fixed
No
[4, 4, 4, 2, 2, 2, 4] N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
No
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
No
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3, 4, 5]
N/A
N/A
Fixed
No
[-24, -13, -24, -13,

N/A
-24, -8]
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0]
N/A
Fixed
[4, 4, 4, 4, 4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[6, 6, 6, 12, 6, 12] N/A
N/A
Network
Planing&Optimiz No
ation
[-24, -10, -10, -24,

N/A
-13, -24]
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0]
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3, 4, 5]
N/A
N/A
Fixed
No
[-115, -95, -115,

-95, -115, -80]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0]
N/A
Fixed
[4, 4, 4, 4, 4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[6, 6, 6, 12, 6, 12] N/A
N/A
Network
Planing&Optimiz No
ation
[-115, -90, -90,

-115, -95, -115]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0, 0.0, 0.0,

N/A
0.0, 0.0]
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
[3, 5]
N/A
N/A
Fixed
No
[-13, -8]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0]
N/A
N/A
Fixed
[4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[12, 12]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[3, 5]
N/A
N/A
Fixed
No
[-95, -80]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0]
N/A
N/A
Fixed
[4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
No
No
[12, 12]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[3, 5]
N/A
N/A
Fixed
No
[-13, -8]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0]
N/A
N/A
Fixed
[4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[12, 12]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
[3, 5]
N/A
N/A
Fixed
No
[-95, -80]
N/A
N/A
Network
Planing&Optimiz No
ation
[0.0, 0.0]
N/A
N/A
Fixed
[4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[12, 12]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3]
N/A
N/A
Fixed
No
[-9, -24, -24, -24]
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 0, 0, 0]
N/A
N/A
Fixed
[-90, -95, -95,

-115]
N/A
N/A
Network
Planing&Optimiz No
ation
[4, 4, 2, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[6, 6, 6, 6]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3]
N/A
N/A
Fixed
No
[-95, -115, -115,

-115]
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 0, 0, 0]
N/A
N/A
Fixed
No
No
[-95, -115, -115,

-115]
N/A
N/A
Network
Planing&Optimiz No
ation
[4, 4, 4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[6, 6, 6, 6]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3]
N/A
N/A
Fixed
No
[-9, -24, -24, -24]
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 0, 0, 0]
N/A
N/A
Fixed
[-9, -24, -24, -24]
N/A
N/A
Network
Planing&Optimiz No
ation
[4, 4, 2, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
No
[6, 6, 6, 6]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3]
N/A
N/A
Fixed
No
[-95, -115, -115,

-115]
N/A
N/A
Network
Planing&Optimiz No
ation
[0, 0, 0, 0]
N/A
N/A
Fixed
[-95, -115, -115,

-115]
N/A
N/A
Network
Planing&Optimiz No
ation
[4, 4, 4, 4]
N/A
N/A
Network
Planing&Optimiz No
ation
[6, 6, 6, 6]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
2000
N/A
No
0.0625
ComMeasType,
RptType
N/A
Fixed
When
ComMeasType is
set UTRAN GPS
Timing of Cell
Frames for UE
Fixed
Positioning and
RptType is set
On Modification,
OnModChangTim
e is valid.
No
0.0625
ComMeasType,
RptType
ComMeasTyp
N/A
N/A
N/A
N/A
N/A
N/A
dedMeasType,
rptType
nbDMCfgNote ,
rptType
N/A
nbDMCfgNote,
dedMeasType
-31
N/A
[64, 128]
N/A
-50
N/A
muste be 2
(TCP)
,, rptType
2 (Event
A Report
(TCP)
rptType
must
be
Parameters
must be 2
2 for
(Periodic)
;;
TCP
in DASF(Periodic)
When
2.
When
PS)
,
3.
When
ComMeasType
is
nbDMCfgNote
is
dedMeasType
nbDMCfgNote
is
set
UTRAN
GPS
1
(Period
muste
beAReport
2Report
2
(Event
Timing
of Cell
Parameters
for
(TCP) , rptType
Parameters
for
Frames
for UE
TCP
in
AMR
or
must
be
3
(Event
TCP
in
DASFPositioning
and
DASF-PS)
,
A)
;
PS)
,
RptType
is set
When
dedMeasType
4.
When
dedMeasType
On
Modification,
ComMeasType
muste
be
nbDMCfgNote
isis
muste
be 2
2
OnModDeviTime
set
UTRAN
GPS
(TCP)
,
rptType
3
(Event
B
(TCP)
, rptType
is
valid.
Timing
of Cell
must
be
Report
must
be 2
3 (Event
Frames for; UE
(Periodic)
Parameters
for
A) ;
Positioning,
this
3.
When
TCP
in
DASF4. When
parameter
is is
nbDMCfgNote
PS)
,
nbDMCfgNote
is
valid.
2
dedMeasType
3 (Event
(Event A
B Report
Parameters
must
be 2 for
Report
N/A
TCP
in
(TCP) , DASFrptType
Parameters
for
PS)
must
beDASF4 (Event
TCP, in
dedMeasType
B)
PS); ,
muste
be 2
5.
When
dedMeasType
(TCP)
,
nbDMCfgNote
is
must berptType
2
N/A
must
be
3
(Event
4
(Period
Report
(TCP) , rptType
A)
; be 4 (Event
Parameters
for
must
4.
When
RTT
in
LCS)
,
B) ;
nbDMCfgNote
is
dedMeasType
5. When
3
(Event
B
must
be
5
(RTT)
nbDMCfgNote is ,
Report
rptType
be
N/A
4 (Periodmust
Report
Parameters
2 (Periodic) ;for
Parameters
for
TCP
in LCS)
DASF6.
When
RTT
in
,
PS)
,
nbDMCfgNote
dedMeasType is
dedMeasType
5
(Event
must
be 5E(RTT) ,
must
be must
2
Report
rptType
be
(TCP)
,
rptType
Parameters
2 (Periodic) ;for
must
be 4 in
(Event
SIR
Error
6.
When
B)
;
Threshold
Power
nbDMCfgNote
is
5.
When
Control)
,
5 (Event E
nbDMCfgNote
is
dedMeasType
Report
4
(Period
Report
must
be
1
(SIR
Parameters for
Parameters
Error)
, rptType
SIR Error
in for
RTT
in
LCS)
,
must be 7 (Event
Threshold
Power
dedMeasType
E)
;
Control) ,
must
be 5 (RTT) ,
7.
When
dedMeasType
rptType
be
nbDMCfgNote
is
N/A
must be must
1 (SIR
2
(Periodic)
;
6
(Event
F
Report
Error) , rptType
6.
When
Parameters
for
must
be 7 (Event
nbDMCfgNote
SIR; Error in is
E)
5
Threshold
7.(Event
When E Power
Report
Control)
,
nbDMCfgNote
is
Parameters
for
dedMeasType
6 (Event F Report
SIR
Error
in(SIR
muste
be 1
Parameters
for
Threshold
Error)
,
rptType
SIR Error inPower
Control)
muste
be, 8Power
Threshold
dedMeasType
(Event
F), ;
Control)
N/A
must
be
1 (SIR
8.
When
dedMeasType
Error)
,
rptType
nbDMCfgNote
is
muste be 1 (SIR
must
be
7
(Event
7
(Event
A
Report
Error) , rptType
E)
; be 8 for
Parameters
muste
7.
When
TCP
in F)
AMR)
,
(Event
; [0]<
dlRateLevel
nbDMCfgNote
is
dedMeasType
8.
When
dlRateLevel
[1]
6
(Event
F
Report
must
be
2
nbDMCfgNote is
Parameters
for
(TCP)
, rptType
7 (Event
A Report
SIR
Error
in
muste
be
3
Parameters for
Threshold
(Event
; Power
TCP
in A)
AMR)
,
Control)
,
9.
When
dedMeasType
N/A
dedMeasType
nbDMCfgNote
is
must be 2
muste
be
1
(SIR
8
(Event
B
(TCP) , rptType
Error)
rptType
Report
muste ,be
3
muste
be
Parameters
(Event A) ;8 for
(Event
; ,
TCP
in F)
AMR)
9.
When
8.
When
dedMeasType
nbDMCfgNote is
nbDMCfgNote
is
must
be 2B
8 (Event
7
(Event
A
Report
(TCP)
,
rptType
Report
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Don't Care
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
-31
N/A
N/A
Don't Care
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
4000
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
No
5379,
Ulearfcn =
If
Band 14: 23280EutranFreqBandI
23379;
nd = 13 (Band
14) , Dlearfcn =
If
5379, Ulearfcn =
nd
= 16
mnclength of
mnclength
of
Band
14:(Band
23280{eutranFreqBandI
17)
, Dlearfcn =
N/A
UExternalEUtran 23379;
UExternalEUtran
nd==0} 0,
Band
17: 5730CellTDD
CellFDD
{eutranFreqBandI
5849,
Ulearfcn =
If
nd==1} 600,
Band
17:
23730EutranFreqBandI
{eutranFreqBandI
23849;
nd = 16 (Band
nd==2}
1200,
If
{eutranFreqBandI
17)
, Dlearfcn =
2
N/A
N/A
{eutranFreqBandI
EutranFreqBandI
nd==0}
18000,
Band
17: 5730nd==3}
1950,
nd
= 17
(Band =
{eutranFreqBandI
5849,
Ulearfcn
{eutranFreqBandI
18)
,
Dlearfcn
=
nd==1} 18600,
Band 17: 23730nd==4}
2400,
Band
18:
23849;
NEUtranCId
must
When
{eutranFreqBandI
5999,
Ulearfcn =
nd==2} 19200,
If
EUtranNbrexist
in
EutranCellType
N/A
nd==5}
2650,
Band
18: 23850-=
{eutranFreqBandI
EutranFreqBandI
>NEutranCId
EUtranCId
0, the valueinof
{eutranFreqBandI
23999;
nd==3} 19950,
nd
= 17 (Band
EUtranCell
MO.
EutranFreqBandI
nd==6}
2750,
If
{eutranFreqBandI
18)
, Dlearfcn
nd
can
only
be=
{eutranFreqBandI
EutranFreqBandI
nd==4} 20400,
Band
18:
58500~13,
16~20,
nd==7}
3450,
nd
= 18
(Band =
{eutranFreqBandI
5999,
Ulearfcn
22~24
{eutranFreqBandI
19)
,
Dlearfcn
=
N/A
EutranCellType
nd==5} 20650,
Band
18: 23850When
nd==8} 3800,
Band 19: 6000{eutranFreqBandI
23999;
EutranCellType
{eutranFreqBandI
6149,
Ulearfcn ==
nd==6} 20750,
If
1,
the 19:
value
of
nd==9}
4150,
Band
EutranFreqBandI
EutranFreqBandI
{eutranFreqBandI
24149;
nd==7} 21450,
nd
=
18only
(Band
nd
can
be
nd==10}
4750,
EutranFreqBandI
If
{eutranFreqBandI
19)
,
Dlearfcn
=
32~42
{eutranFreqBandI
nd
EutranFreqBandI
nd==8} 21800,
Band 19: 6000nd==11} 5000,
nd = 19
(Band =
{eutranFreqBandI
6149,
Ulearfcn
{eutranFreqBandI
20)
, Dlearfcn
=
nd==9} 22150,
Band
19: 24000nd==12}
5180,
Band
20:
24149;
{eutranFreqBandI
Ulearfcn =
nd==10} 22750,
EutranFreqBandI 6449,
If
nd==13}
5280,
Band
20:
24150{eutranFreqBandI nd
EutranFreqBandI
{eutranFreqBandI
24449;
nd==11} 23000,
nd = 19 (Band
nd==16} 5730,
If , Dlearfcn =
{eutranFreqBandI
20)
{eutranFreqBandI
EutranFreqBandI
nd==12} 23180,
Band 20: 6150nd==17}
5850,
nd
= 20
(Band =
{eutranFreqBandI
6449,
Ulearfcn
{eutranFreqBandI
21)
,
Dlearfcn
=
N/A
N/A
N/A
nd==13} 23280,
Band 20: 24150nd==18}
6000,
Band
21:
24449;
{eutranFreqBandI
6599,
Ulearfcn =
nd==16} 23730,
If
nd==19} 6150,
Band 21: 24450{eutranFreqBandI
EutranFreqBandI
{eutranFreqBandI
24599;
nd==17} 23850,
nd = 20 (Band
nd==20}
6450,
{eutranFreqBandI
21)
0
N/A
N/A , Dlearfcn =
{eutranFreqBandI
If
nd==18} 24000,
Band 21: 6450nd==22}
7500,
EutranFreqBandI
{eutranFreqBandI
6599, Ulearfcn =
{eutranFreqBandI
nd
= 22
nd==19} 24150,
Band
21:(Band
24450nd==23}
7700,
23)
, Dlearfcn =
{eutranFreqBandI
24599;
{eutranFreqBandI
Band 23: 7500nd==20}
24450,
0
N/A
N/A
nd==24}
8040
7699,
Ulearfcn =
{eutranFreqBandI
If
Band
23:
25500nd==22} 25500,
EutranFreqBandI
25699;
{eutranFreqBandI
nd = 22 (Band
If , Dlearfcn =
nd==23} 25700,
23)
EutranFreqBandI
{eutranFreqBandI
Band 23: 7500nd
= 23
(Band =
0
N/A
N/A
nd==24} 26040
7699,
Ulearfcn
24)
,
Dlearfcn
=
Band 23: 25500Band
24:
770025699;
8039,
Ulearfcn =
If
26039;
nd
85
N/A
N/A= 23 (Band
If
24) , Dlearfcn =
EutranFreqBandI
Band 24: 7700nd
= 24
(Band =
8039,
Ulearfcn
25)
,
Dlearfcn
=
Band 24: 25700Band 25: 804026039;
85
N/A
N/A
8689,
Ulearfcn =
If
Band
25:
26040EutranFreqBandI
26689;
nd = 24 (Band
25) , Dlearfcn =
If
8689,
Ulearfcn =
nd
= 32
Band
25:(Band
2604033)
, Dlearfcn =
26689;
Band 33: 36000-
Network
Planing&Optimiz Yes
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
If
EutranFreqBandI
nd = 11 (Band
12) , Dlearfcn =
Band 12: 50005179, Ulearfcn =
Band 12: 2300023179;
N/A
If
EutranFreqBandI
nd = 12 (Band
13) , Dlearfcn =
Band
N/A 13: 51805279, Ulearfcn =
Band 13: 2318023279;
If
EutranFreqBandI
N/A
nd = 13 (Band
14) , Dlearfcn =
Band 14: 23280N/A
23379;
If
EutranFreqBandI
nd
= 16 (Band
mnclength of
mnclength
of
, Dlearfcn =
N/A
UExternalEUtran 17)
UExternalEUtran
Band
17: 5730CellTDD
CellTDD
5849, Ulearfcn =
Band 17: 2373023849;
If
2
N/A
N/A
EutranFreqBandI
nd = 17 (Band
18) , Dlearfcn =
Band
18: 5850NEUtranCId
must
When
5999,
Ulearfcn =
EUtranNbrexist
in
{eutranFreqBandI
EutranCellType
N/A
Band
18: 23850-=
>NEutranCId
EUtranCId
nd==32} 36000,
0, the valueinof
23999;
EUtranCell MO.
{eutranFreqBandI
EutranFreqBandI
If
nd==33} 36200,
nd
can only be
EutranFreqBandI
{eutranFreqBandI
0~13,
16~20,
nd = 18
(Band
nd==34} 36350,
22~24
19) , Dlearfcn =
N/A
EutranCellType
{eutranFreqBandI
When
Band 19: 6000nd==35} 36950,
EutranCellType
6149,
Ulearfcn ==
{eutranFreqBandI
1,
the 19:
value
of
Band
24000nd==36} 37550,
EutranFreqBandI
24149;
{eutranFreqBandI
EutranFreqBandI nd
If can only be
nd==37} 37750,
32~42
nd
EutranFreqBandI
{eutranFreqBandI
nd = 19 (Band
nd==38} 38250,
20) , Dlearfcn =
{eutranFreqBandI
Band 20: 6150nd==39} 38650,
6449, Ulearfcn =
{eutranFreqBandI
N/A
N/A
N/A
Band 20: 24150nd==40} 39650,
24449;
{eutranFreqBandI
If
nd==41} 41590,
EutranFreqBandI
{eutranFreqBandI
nd = 20 (Band
nd==42} 43590
21)
0
N/A
N/A , Dlearfcn =
Band 21: 2445024599;
0
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz Yes
ation
Network
Planing&Optimiz Yes
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Network
N/A
Planing&Optimiz No
If
ation
EutranFreqBandI
nd = 22 (Band
23) , Dlearfcn =
Band 23: 2550025699;
N/A
N/A
Network
Planing&Optimiz No
ation
85
N/A
N/A
Fixed
No
85
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
N/A
N/A
MCC of
UExternalUtranCe
llFDD, MNC of
UExternalUtranCe
llFDD, RncId of
UExternalUtranCe
llFDD, CId of
UExternalUtranCe
llFDD
MNC
LAC
CI
N/A
N/A
N/A
mcc+mnc+lac+ce
llIdentity must be
unqiue ; the
same
requirement for
combination of
sharingMCC[]
+sharingMNC+la
c+cellIdentity
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
parent rncid,
1) just same as
its parent rncid,
Network
2)
Planing&Optimiz No
mnc+mcc+rncID+
ation
cID must be
unqiue
N/A
N/A
Fixed
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
24
N/A
N/A
Fixed
No
-115
N/A
N/A
Network
Planing&Optimiz No
ation
-2
N/A
N/A
Network
Planing&Optimiz No
ation
No
33
N/A
-18
N/A
N/A
N/A
N/A
l-400;462, 487,
437,
3)
if freqBandInd
512,
537, 562,
=
2
III) ,
587,(Band
612, 637,
uarfcnDl
must
be
662, 687,
band3:
1162..
uarfcnUl=uarfcnD
1513,
l-400;
uarfcnUl=uarfcnD
3)
If
l-225;
freqBandInd=2
N/A
4)
if freqBandInd
(Band
III) ,
=
4
(Bandmust
V) , be
uarfcnDl
uarfcnDl
must
band 3: 1162.. be
band5:
1513, 4357..
4458 , 1007,
uarfcnUl=uarfcnD
1012,
l-225; 1032,
1037,
1062,
4) If freqBandInd
1087,
is 4 (Band V) ,
uarfcnUl=uarfcnD
uarfcnDl must be
l-225;
band 5: 4357..
5) if freqBandInd
4458
, 1007,
=
5 (Band
VI) ,
1012,
1032,
uarfcnDl
must
1037, 1062, be
band6:
1087,
4387
..4413,
uarfcnUl=uarfcnD
1037,
1062,
l-225;
N/A
uarfcnUl=uarfcnD
5) If
l-225;
freqBandInd=5
6)
if freqBandInd
(Band
VI) ,
=
7
(Bandmust
VIII)be
uarfcnDl
uarfcnDl
must
be
band 6:
N/A
band8..4413,
:
4387
2937..3088,
1037, 1062,
uarfcnUl=uarfcnD
uarfcnUl=uarfcnD
l-225;
l-225;
7)
6) ifIf freqBandInd
freqBandInd
=
(BandVIII)
IV) ,,
N/A
=73(Band
uarfcnDl must
must be
be
uarfcnDl
band4:
1537..
2937..3088,
1738,
1887,
uarfcnUl=uarfcnD
1912,
l-225; 1937,
1962,
1987,
7)
N/AIf
2012,
2037,
freqBandInd=3
2062, 2087,
(Band
IV) ,
uarfcnUl=uarfcnD
uarfcnDl must be
l-225.
4: 1537.. 1738,
1887, 1912,
N/A
1937, 1962,
1987, 2012,
2037, 2062,
2087,
uarfcnUl=uarfcnD
N/A
l-225.
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
{freqBandInd==0}
9612,
N/A
{freqBandInd==1}
12,
{freqBandInd==2}
937,
{freqBandInd==0}
{freqBandInd==3}
10562,
1312,
{freqBandInd==1}
{freqBandInd==4}
412,
782,
{freqBandInd==2}
{freqBandInd==5}
1162,
812,
{freqBandInd==3}
{freqBandInd==7}
1537,
2712
{freqBandInd==4}
1007,
{freqBandInd==5}
1037,
N/A
{freqBandInd==7}
2937
N/A
freqBandInd
uarfcnDl
uarfcnUl,
freqBandInd
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
URANum of
UExternalUtranCe
llFDD, URA[4] of
UExternalUtranCe
llFDD
SNACNum of
UExternalUtranCe
llFDD, SNAC[4] of
UExternalUtranCe
llFDD
SNACNum of
UExternalUtranCe
llFDD, SNAC[4] of
UExternalUtranCe
llFDD
URA[4] is a list.
the max element
number of list is
4. the valid
element number
is
URANum
SNAC[4]
is a. list.
the max element
number of list is
4. the valid
element number
is
SNACNum
.
SNAC[4]
is a list.
the max element
number of list is
4. the valid
element number
is SNACNum .
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
IURDCHSDSSUP
TIND
N/A
N/A
PolygonPointNum
,
PolyLatitudeSign[
15],
PolygonPointNum
PolyLatitude[15],
of
PolyLongitude[15]
UtranCell/external
PolygonPointNum
,, CellDescripType
UtranCell,
PolyLatitudeSign[
PolyLatitudeSign[
MAX_POINT_NU
15],
M]
of
PolyLatitude[15],
UtranCell/external
PolyLongitude[15]
UtranCell,
, CellDescripType
PolyLatitude[MAX
_POINT_NUM] of
UtranCell/external
UtranCell,
PolygonPointNum
PolyLongitude[MA
,X_POINT_NUM]
PolyLatitudeSign[
of
15],
UtranCell/external
PolyLatitude[15],
UtranCell,
PolyLongitude[15]
CellDescripType
,ofCellDescripType
UtranCell/external
UtranCell
N/A
N/A
N/A
[0, 0, 0]
[0, 0, 0]
[0, 0, 0]
if the value of
IURDCHSDSSU
PTIND is "False",
this paramater is
invalid for the
1)
correspongding
PolyLatitudeSign[
Cell
15],
PolyLatitude[15],
N/A
PolyLongitude[15
]1)are List, the
maximum
PolyLatitudeSign[
1)
number is
15],
PolyLatitudeSign[
15.PolygonPoint
PolyLatitude[15],
MAX_POINT_NU
N/A
Num
indicates
PolyLongitude[15
M],
the
valid
]PolyLatitude[MA
are List,list
the
length
of
maximum
X_POINT_NUM],
PolyLatitudeSign[
number is
PolyLongitude[M
15],
15.PolygonPoint
AX_POINT_NUM
PolyLatitude[15],
Num
indicates
]PolyLongitude[15
is list,
the
the
valid
list
maximum
1)
].
length
of
number
of the list
PolyLatitudeSign[
2)
only when
PolyLatitudeSign[
is
15.
15],
CellDescripType
15],
PolygonPointNu
PolyLatitude[15],
is
set 1 (Polygon)
PolyLatitude[15],
m
indicates
PolyLongitude[15
,PolyLongitude[15
the
values the
of
valid
list length
]].are List,
the of
parameters
PolyLatitudeSign[
maximum
PolygonPointNu
2)
only when
15MAX_POINT_
number
is
m,
CellDescripType
NUM],
15.PolygonPoint
PolyLatitudeSign[
is
set
1
(Polygon)
PolyLatitude[MA
Num
indicates
15],
,X_POINT_NUM],
the values
of
the
valid
list
PolyLatitude[15],
parameters
PolyLongitude[M
length
of
PolyLongitude[15
PolygonPointNu
AX_POINT_NUM
PolyLatitudeSign[
]are
valid.
m,
].
15],
PolyLatitudeSign[
2)
Only when
PolyLatitude[15],
15],
CellDescripType
PolyLongitude[15
PolyLatitude[15],
is
set 1 (Polygon)
].
PolyLongitude[15
,2)the
value
of
only
when
]are
valid.
PolygonPointNu
CellDescripType
m,set 1 (Polygon)
is
N/A
PolyLatitudeSign[
, the values of
MAX_POINT_NU
parameters
M],
PolygonPointNu
PolyLatitude[MA
m,
X_POINT_NUM],
PolyLatitudeSign[
N/A
PolyLongitude[M
15],
AX_POINT_NUM
PolyLatitude[15],
]PolyLongitude[15
are valid.
] are valid.
N/A
No
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
10000
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
AnteType,
OffsetAngle,
InnerAngle
Only when
AnteType is 1
(Beam Antenna) , Fixed
OffsetAngle/Inner
Angle are Valid
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
AnteType,
OffsetAngle,
InnerAngle
AnteType,
OffsetAngle,
InnerAngle
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Don't Care
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
Only when
AnteType is 1
OffsetAngle/Inner
Angle are Valid
Only when
AnteType is 1
OffsetAngle/Inner
Angle are Valid
No
No
No
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
-18
N/A
N/A
Fixed
No
-115
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
-2
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
384
N/A
N/A
Fixed-keep
monitoring
No
384
N/A
N/A
Fixed-keep
monitoring
No
384
N/A
N/A
Fixed-keep
monitoring
No
384
N/A
N/A
Fixed-keep
monitoring
No
5760
N/A
N/A
Fixed-keep
monitoring
No
5760
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
CellDescripType,
GARptType
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
65535
N/A
HspaSptMeth
hsuStat
N/A
N/A
N/A
N/A
Fixed
when
N/A
CellDescripType
set 0, GARptType
can be set 0, 1,
2, 3, 4;
when
CellDescripType
set 1, GARptType
can be set 5;
when
CellDescripType
set
N/A2, GARptType
can be set 6;
Network
Planing&Optimiz No
ation
When
HspaSptMeth is
set 1 (Support
HSDPA
and
N/A
DCH) , 2
(Support HSDPA
only) , 3 (Support
HSUPA , HSDPA
and DCH) , 4
(Support HSUPA
and HSDPA) ,
hsdStat is valid.
When the value
of hsdStat is 0
N/A
(Inactive) , the
value of hsuStat
must be 0
(Inactive) .
No
Fixed
No
Fixed
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Bandindicator:
DCS 1800,
bcchFrequency:
(512..885)
Bandindicator:
N/A
PCS 1900,
bcchFrequency:
(512 .. 812)
Bandindicator:
Standard
N/A
GSM900,
bcchFrequency:
mcc+mnc+lac+ce
(1..124)
llIdentity
must be
Bandindicator:
unqiue450,
; the
GSM
same
requirment
bcchFrequency:
for
sharingMCC[]
259~293
+sharingMNC+la
Bandindicator:
c+cellIdentity
GSM480,
bcchFrequency:
306~340
Bandindicator:
GSM750,
bcchFrequency:
438~511
Bandindicator:
N/A
GSM750,
bcchFrequency:
128~251
Bandindicator:
Extended
N/A
GSM900,
mcc+mnc+lac+ce
bcchFrequency:
llIdentity
must be
(0..124) and
unqiue
; the
(975..1023)
same
Bandindicator:
requirement
for
Railways
combination
of
GSM900,
mcc+mnc+lac+ce
sharingMCC[]
bcchFrequency:
llIdentity must be
+sharingMNC+la
(0..124)
unqiue ; and
the
c+cellIdentity
(955..1023)
same
1)
mncLength =
requirement
2, mnc is in for
combination
of
(0~99 )
sharingMCC[]
2)
+sharingMNC+la
mcc+mnc+lac+ce
c+cellIdentity
llIdentity
must be
unqiue ; the
same
requirement
RAI contain for
combination
of
MCC, MNC, LAC
sharingMCC[]
and
RAC (RAI =
+sharingMNC+la
MCC + MNC +
c+cellIdentity
LAC+ RAC) , only
valid when
GeranCellInd is1
N/A
MCC
MNC
LAC
N/A
Bandindicator
N/A
N/A
N/A
N/A
N/A
MCC
MNC
cellIdentity
N/A
MNC
LAC
CI
N/A
MCC
LAC
CI
MCC
of
mncLength
UExternalGsmCel
l, MNC of
UExternalGsmCel
l, LAC of
UExternalGsmCel
l, RAC of
UExternalGsmCel
l
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
N/A
MNC
LAC
CI
N/A
MCC
LAC
CI
mncLength
N/A
N/A
N/A
mcc+mnc+lac+ce
llIdentity must be
unqiue ; the
same
1)
mncLength =
requirement
2, mnc is in for
combination
of
(0~99 )
sharingMCC[]
2)
+sharingMNC+la
mcc+mnc+lac+ce
c+cellIdentity
llIdentity must be
unqiue ; the
same
requirement for
combination of
sharingMCC[]
+sharingMNC+la
N/A
c+cellIdentity
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
SNACNum of
UExternalUtranCe
llFDD, SNAC[4] of
UExternalUtranCe
llFDD
SNACNum of
UExternalUtranCe
llFDD, SNAC[4] of
UExternalUtranCe
llFDD
SNAC[4] is a list.
the max element
number of list is
4. the valid
element number
is
SNACNum
.
SNAC[4]
is a list.
the max element
number of list is
4. the valid
element number
is SNACNum .
N/A
N/A
Network
Planing&Optimiz No
ation
30
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
-115
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
-2
N/A
N/A
Network
Planing&Optimiz No
ation
-115
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
-2
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
85
N/A
N/A
Fixed
No
85
N/A
N/A
Fixed
No
75
N/A
N/A
Fixed
No
75
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
CId of UtranCell
CId of AICH must

be the same as Network
the CId of
Planing&Optimiz No
UtranCell of the ation
same cell.
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
43
N/A
N/A
Network
Planing&Optimiz No
ation
DUARFCN>UUA
N/A
RFCN, and
if FreqBandInd is
0 (Band I) , then
DUARFCN shall
be Band 1
DUARFCN>UUA
1
N/A
N/A
(10562..10838)
,
RFCN, and
and
if FreqBandInd is
UUARFCN=DUA
0 (Band I) , then
RFCN-950.
DUARFCN shall
ifbeFreqBandInd
is
Band 1
1
(Band II) , then,
N/A
N/A
N/A
(10562..10838)
DUARFCN
shall
and
be
Band
2
UUARFCN=DUA
(9662..9938,
RFCN-950. 412,
437,
462, 487, is
if FreqBandInd
512,
537,II)562,
1
(Band
, then
N/A
N/A
N/A
587,
612, 637,
DUARFCN
shall
662,
687)2, and
be Band
UUARFCN=DUA
(9662..9938, 412,
MCC of utranCell, RFCN-400.
437, 462, 487,
MNC of utranCell, ifCS+PS's
FreqBandInd
512,
537, SAI
562,= is
N/A
LAC of utranCell, MCC
+ MNC
+
2 (Band
III)637,
, then
587,
612,
SACPC of
LAC+
SACPC
DUARFCN
shall
662, 687) , and
utranCell
be
Band 3 (1162..
UUARFCN=DUA
1513)
, and
RFCN-400.
{freqBandInd==0}
UUARFCN=DUA
if FreqBandInd is
9612,
RFCN-225.
N/A
N/A
N/A
2 (Band III) , then
{freqBandInd==1}
if FreqBandInd
DUARFCN
shallis
12,
4
, then
be(Band
Band V)
3 (1162..
{freqBandInd==2} FreqBandInd of
DUARFCN
1513) , and shall
937,
utranCell,
be
Band 5
{freqBandInd==0}
UUARFCN=DUA
{freqBandInd==3}
UUARFCN
of
(4357..
4458 ,
10562,
RFCN-225.
1312,
utranCell,
1007,
1012,
{freqBandInd==1}
if FreqBandInd is
{freqBandInd==4} DUARFCN of
1032,
1037,
412,
4
(Band
V) , then
782,
1062,
1087)shall
, and
{freqBandInd==2} utranCell
FreqBandInd of
DUARFCN
{freqBandInd==5}
UUARFCN=DUA
1162,
utranCell,
be Band 5
812,
RFCN-225.
{freqBandInd==3} UUARFCN of
(4357.. 4458 ,
{freqBandInd==7}
if1007,
FreqBandInd
is
1537,
utranCell,
1012,
2712
5
(Band
VI)
,
then
{freqBandInd==4} DUARFCN of
1032, 1037,
DUARFCN
1007,
utranCell
1062,
1087)shall
, and
be
Band 6
{freqBandInd==5}
UUARFCN=DUA
(4387
..4413,
1037,
RFCN-225.
1037,
1062)
, and
{freqBandInd==7}
if FreqBandInd
is
UUARFCN=DUA
2937
5 (Band VI) , then
RFCN-225.
DUARFCN shall
if FreqBandInd is
-7
N/A
Fixed-keep
monitoring
No
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz Yes
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
To the Home
Cell, the value of Network
this parameter
Planing&Optimiz No
ation
only be invalid
value (0xffff) .
N/A
N/A
33
primaryCpichPow
Network
maximumTransmi er <=
Planing&Optimiz No
ssionPower
maximumTransm
ation
issionPower
-3
N/A
N/A
Fixed-keep
monitoring
No
-4
N/A
N/A
Fixed-keep
monitoring
No
-3
N/A
N/A
Fixed-keep
monitoring
No
-7
N/A
N/A
Fixed-keep
monitoring
No
-18
N/A
N/A
Network
Planing&Optimiz No
ation
-115
N/A
N/A
Network
Planing&Optimiz No
ation
-2
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
lFDD is
'supported' and
MimoPilotMode is
'P-CPICH + PCPICH', then
txDiversityIndicat
MimoSuptInd of
or shall be
UUtranCellFDD, 'Active'.If
MimoPilotMode of MimoSuptInd of
UUtranCellFDD
vsDataUUtranCel
lFDD is
'supported' and
MimoPilotMode is
N/A
N/A
'P-CPICH + SCPICH', then
txDiversityIndicat
or shall be
'Inactive'
N/A
N/A
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
-3
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
-12
N/A
N/A
Fixed
No
-92
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
N/A
Fixed-keep
monitoring
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
No
N/A
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
[0, 0, 0]
[0, 0, 0]
[0, 0, 0]
PolygonPointNum
,
PolyLatitudeSign[
15],
PolyLatitude[15],
PolyLongitude[15]
PolygonPointNum
,, CellDescripType
PolyLatitudeSign[
15],
PolyLatitude[15],
PolyLongitude[15]
PolygonPointNum
,, CellDescripType
PolyLatitudeSign[
15],
PolyLatitude[15],
PolyLongitude[15]
PolygonPointNum
,, CellDescripType
PolyLatitudeSign[
15],
PolyLatitude[15],
PolyLongitude[15]
, CellDescripType
N/A
N/A
1)
PolyLatitudeSign[
15],
PolyLatitude[15],
N/A
PolyLongitude[15
]1)are List, the
maximum
PolyLatitudeSign[
number is
15],
15.PolygonPoint
PolyLatitude[15],
N/A
Num
indicates
PolyLongitude[15
the
valid
]1)are List,list
the
length
of
maximum
PolyLatitudeSign[
PolyLatitudeSign[
number is
15],
15],
15.PolygonPoint
PolyLatitude[15],
PolyLatitude[15],
Num
indicates
PolyLongitude[15
PolyLongitude[15
the
valid
]1)
are List,list
the
].
length
of
maximum
PolyLatitudeSign[
2)
only when
PolyLatitudeSign[
number
is
15],
CellDescripType
15],
15.PolygonPoint
PolyLatitude[15],
is
set
1
(Polygon)
PolyLatitude[15],
Num
indicates
PolyLongitude[15
,PolyLongitude[15
the values
of
the
valid
]].are List,list
the
parameters
length
of
maximum
PolygonPointNu
2)
only when
PolyLatitudeSign[
number
is
m,
CellDescripType
15],
15.PolygonPoint
PolyLatitudeSign[
is
set
1
(Polygon)
PolyLatitude[15],
Num
indicates
15],
,PolyLongitude[15
the values
of
the
valid
list
PolyLatitude[15],
parameters
].
length
of
PolyLongitude[15
PolygonPointNu
2)
only
when
PolyLatitudeSign[
]are
valid.
m,
CellDescripType
15],
PolyLatitudeSign[
is
set 1 (Polygon)
PolyLatitude[15],
15],
,PolyLongitude[15
the values of
PolyLatitude[15],
parameters
].
PolyLongitude[15
PolygonPointNu
2)
only
when
]are
valid.
m,
CellDescripType
PolyLatitudeSign[
is
set 1 (Polygon)
N/A
15],
, the values of
PolyLatitude[15],
parameters
PolyLongitude[15
PolygonPointNu
]are
m, valid.
PolyLatitudeSign[
N/A
15],
PolyLatitude[15],
PolyLongitude[15
]are valid.
No
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
10000
N/A
N/A
Fixed
No
N/A
CellDescripType,
GARptType
AnteType,
OffsetAngle,
InnerAngle
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
when
N/A
CellDescripType Fixed
set 0, GARptType
can be set 0, 1,
2, 3, 4;
when
CellDescripType Fixed
set 1, GARptType
can be set 5;
when
Only when
CellDescripType
AnteType is 1
set
2, GARptType
(Beam
Antenna) , Fixed
can
be set 6;
OffsetAngle/Inner
Angle are Valid
No
No
No
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
AnteType,
OffsetAngle,
InnerAngle
Fixed
No
Fixed
No
Only when
AnteType is 1
when
(Beam
Antenna) ,
CellDescripType
OffsetAngle/Inner
set 0, GARptType
Angle
can beare
setValid
0, 1,
2, 3, 4;
when
CellDescripType,
CellDescripType
GARptType
set 1, GARptType
If
MbmsSuptInd
can
be set 5;
of
when
vsDataUtranCellF
CellDescripType
D
is2,1 GARptType
or2,
set
N/A
N/A
SccpchCfgScene
can be set 6;
of
vsDataUtranCellF
DD can only be
set to the value
SccpchCfgScene
among 4~7; If
of UtranCellFDD
MbmsSuptInd of
vsDataUtranCellF
D is 0,
SccpchCfgScene
of
N/A
N/A
vsDataUtranCellF
DD can only be
set to the value
among 0~3.
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
When
HspaSptMeth is
set 1 (Support
HSDPA
and
N/A
DCH) , 2
(Support HSDPA
only) , 3 (Support
HSUPA
When , HSDPA
and
DCH) , 4 is
HspaSptMeth
(Support
HSUPA
set 3 (Support
and HSDPA)
,
HSUPA
, HSDPA
hsdStat
is valid.
and DCH)
,4
When
theHSUPA
value
(Support
of
hsdStat
is 0,
and HSDPA)
(Inactive)
,
the
hsuStat is valid.
value
of
hsuStat
When the value
When
must
be 0 is 0
of
hsdStat
MbmsSuptInd
(Inactive)
., the is
(Inactive)
set 1 (Support
value
hsuStat
MBMSofand
not
must
be
MBMS) ,02 (Only
(Inactive)
.
Support MBMS)
,
mbmsStat is
valid.
N/A
HspaSptMeth
hsuStat
HspaSptMeth
hsdStat
MbmsSuptInd
N/A
N/A
N/A
N/A
TrfCatIntraMIdx
The value of
VipTrfCatIntraIdx Fixed-keep
must be exists in monitoring
TrfCatIntraMIdx
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
70
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
384
N/A
N/A
Fixed
No
384
N/A
N/A
Fixed-keep
monitoring
No
384
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
Yes
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
sIB6Ind
If sIB6Ind is
False,
prachSib6Pre
must be False.
Fixed
No
N/A
N/A
Fixed
No
-13
N/A
N/A
Fixed-keep
monitoring
No
-108
N/A
N/A
Fixed-keep
monitoring
No
14
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
24
N/A
N/A
Fixed
No
If and only if
ULEFACHSuppor
t of
ULEFACHSupport vsDataUtranCellF Fixed-keep
No
of UtranCellFDD DD is "1:
monitoring
Supported" , this
parameter must
be set to 1" or "2"
Network
N/A
N/A
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
[65534, 65534]
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
If MimoSuptInd of
vsDataUUtranCel
lFDD is
'supported' and
MimoPilotMode
is
N/A
N/A
'P-CPICH + PCPICH', then
txDiversityIndicat
MimoSuptInd of
or shall be
UUtranCellFDD,
'Active'.If
txDiversityIndicato
MimoSuptInd of
r of
vsDataUUtranCel
UUtranCellFDD
lFDD is
'supported' and
MimoPilotMode is
N/A
N/A
'P-CPICH + SCPICH', then
txDiversityIndicat
or shall be
'Inactive'
N/A
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
If VamSupInd is
set to
"Supported",
Fixed-keep
SttdSuptInd
of
N/A
UtranCell should monitoring
be set to "Not
Supported".
No
SttdSuptInd;
MimoSuptInd
MimoSuptInd
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
N/A
If VamSupInd is
set
to
If VamSupInd
is
"Supported",
set
to
MimoSuptInd
"Supported", can
be
set to
MimoSuptInd
can
"Supported"
only
be set to
if"Supported" only
SttdMimoBindInd
if
is set to "Not
SttdMimoBindInd
Bind"
is set to "Not
Bind"
N/A
N/A
N/A
Fixed
Network
Planing&Optimiz No
ation
No
Only when
PriRedirectRat is
PriRedirectRat
1, 2, 3, or 4,
RrcRdtSwch
(1) When can
be
set to 1.
PriRedirectRat
is
1, 2, 3, or 4,
PriRedirectRat of Twait can't be 0.
utranCell
(2) Only when
Twait of utranCell PriRedirectRat is
1, 2, 3, or 4,
RrcRdtSwch can
be set to 1.
N/A
N/A
N/A
N/A
EFACHSpptInd
ULEFACHSuppor
Network
t is valid only
Planing&Optimiz No
when
EFACHSpptInd
ation
of CelInfo is 1
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
mbmsSuptInd
N/A
N/A
If MbmsSuptInd
of
vsDataUtranCellF
D is 1 or2,
N/A
SccpchCfgScene
of
vsDataUtranCellF
DD can only be
set to the value
among 4~7; If
MbmsSuptInd of
vsDataUtranCellF
D is 0,
SccpchCfgScene
of
N/A
vsDataUtranCellF
DD can only be
set to the value
among 0~3.
N/A
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
{cellRadiusScene
==0} 1,
{cellRadiusScene
==1} 1,
{cellRadiusScene
==2} 1,
N/A
{cellRadiusScene
==3} 1,
{cellRadiusScene
==4} 1,
{cellRadiusScene
0
N/A
==5} 0
N/A
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
FreClosePri is
valid only when
CloseFreFunSwit
CloseFreFunSwit
is 1.
BPriAcIndex of
UtranCell must
have the
BPriAcIndex of
corresponding
BPriAc
BPriAcIndex with
the same value in
BPriAc.
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
AppPriIndex of
AppPri
CgtCtlPriIndex of
UtranCell must
have the
Fixed-keep
corresponding
monitoring
CgtCtlPriIndex
with the same
value in AppPri.
No
10
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
16
N/A
N/A
Fixed
No
16
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
endTimetoClsF
The value of
startTimetoClsF Network
and
Planing&Optimiz No
endTimetoClsF is ation
different.
[7, 0, 0]
startTimetoClsF
The value of
startTimetoClsF Network
Planing&Optimiz No
and
endTimetoClsF is ation
different.
N/A
N/A
Network
Planing&Optimiz No
ation
300
N/A
N/A
Network
Planing&Optimiz No
ation
[22, 0, 0]
N/A
Network
Planing&Optimiz No
ation
N/A
OpenFreAlg is
Network
valid only when
CloseFreFunSwit
Planing&Optimiz No
CloseFreFunSwit
ation
is 1.
0.5
N/A
N/A
Network
Planing&Optimiz No
ation
384
N/A
N/A
Fixed-keep
monitoring
No
384
N/A
N/A
Fixed-keep
monitoring
No
5760
N/A
N/A
Fixed-keep
monitoring
No
5760
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
21096
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
5760
N/A
N/A
Fixed-keep
monitoring
No
CellBarPollingSw
h is valid only
CellBarPollingSw when
Fixed-keep
h
CellBarAcSwh of monitoring
R6CelInfo is not
"0"
No
CellBarAcSwh
Valid only when

CellBarAcSwh of Fixed-keep
R6CelInfo is not monitoring
"0"
No
Valid only when

CellBarPollingSw CellBarPollingSw Fixed-keep
h
h is set to
monitoring
"Polling"
No
60
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz Yes
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
130
N/A
N/A
Fixed
No
255
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
-106
N/A
N/A
Fixed
No
64
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
50
N/A
N/A
Fixed-keep
monitoring
No
60
N/A
N/A
Fixed-keep
monitoring
No
16
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
10
N/A
N/A
Fixed
No
33
N/A
N/A
Fixed
No
-7
DlCacSwitch
If
DlCacSwitch="0:
Fixed-keep
closed", this
monitoring
parameter is
invalid
No
50
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
25
PowerMarginOpe
Network
PowerMarginOpe n <=
Planing&Optimiz No
n
PowerMarginClos
ation
e
IntMarginOpen
IntMarginOpen <=
>=
IntMarginClose
IntMarginClose
Network
Planing&Optimiz No
ation
32
CodeMarginOpen
Network
<=
CodeMarginOpen
Planing&Optimiz No
CodeMarginClos
ation
e
32
UlCeMarginOpen Network
UlCeMarginOpen <=
Planing&Optimiz No
UlCeMarginClose ation
32
DlCeMarginOpen Network
DlCeMarginOpen <=
Planing&Optimiz No
DlCeMarginClose ation
20
HsNumMarginOp
Network
HsNumMarginOp en <=
Planing&Optimiz No
en
HsNumMarginClo
ation
se
20
ENumMarginOpe
Network
ENumMarginOpe n <=
Planing&Optimiz No
n
ENumMarginClos
ation
e
20
PowerMarginOpe
Network
PowerMarginClos n <=
Planing&Optimiz No
e
PowerMarginClos
ation
e
IntMarginOpen
IntMarginOpen <=
>=
IntMarginClose
IntMarginClose
16
CodeMarginOpen
Network
<=
CodeMarginClose
Planing&Optimiz No
CodeMarginClos
ation
e
16
UlCeMarginOpen Network
UlCeMarginClose <=
Planing&Optimiz No
UlCeMarginClose ation
16
DlCeMarginOpen Network
DlCeMarginClose <=
Planing&Optimiz No
DlCeMarginClose ation
15
HsNumMarginOp
Network
HsNumMarginClo en <=
Planing&Optimiz No
se
HsNumMarginClo
ation
se
Network
Planing&Optimiz No
ation
15
ENumMarginOpe
Network
ENumMarginClos n <=
Planing&Optimiz No
e
ENumMarginClos
ation
e
N/A
This parameter is
valid only when
Fixed-keep
CloseFreFunSwit
CloseFreFunSwit monitoring
is 1.
N/A
N/A
Network
Planing&Optimiz No
ation
SAOnThs
SAOnThs >
SAOffThs
Fixed-keep
monitoring
No
10
SAOffThs
SAOnThs >
SAOffThs
Fixed-keep
monitoring
No
60
N/A
N/A
Fixed-keep
monitoring
No
95
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
Network
Planing&Optimiz No
ation
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Don't Care
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
20
N/A
N/A
Fixed-keep
monitoring
No
20
N/A
N/A
Fixed-keep
monitoring
No
10
hsdpaNumHigh
hsdpaNumLow
<=
hsdpaNumHigh
Fixed-keep
monitoring
No
20
hsdpaNumLow
hsdpaNumLow
<=
hsdpaNumHigh
Fixed-keep
monitoring
No
-12
N/A
N/A
Fixed-keep
monitoring
No
-110
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
-12
N/A
N/A
Fixed-keep
monitoring
No
-110
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
LowRotThreshold
<=
Fixed-keep
HighRotThreshold
HighRotThreshol monitoring
d
No
LowRotThreshold
<=
Fixed-keep
LowRotThreshold
HighRotThreshol monitoring
d
No
10
LowUserNumThr
Fixed-keep
HighUserNumThr <=
monitoring
HighUserNumThr
No
20
LowUserNumThr
LowUserNumThr
Fixed-keep
<=
monitoring
HighUserNumThr
No
30
DlHighLoadThr
DlLowLoadThr
<=
DlHighLoadThr
Fixed-keep
monitoring
No
70
DlLowLoadThr
DlLowLoadThr
<=
DlHighLoadThr
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
[1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, N/A
1, 1]
N/A
Fixed-keep
monitoring
No
[1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, N/A
1, 1]
N/A
Fixed-keep
monitoring
No
25
N/A
Network
Planing&Optimiz No
ation
N/A
CSDsarPollingSw
h is valid only
when
CSDsarSwh of
CSDsarPollingSw R6CelPlmn is not
h,
0.
PSDsarPollingSw
PagingLocaBarS PagingLocaBarS
h is valid only
wh
wh is valid only
when
when
PSDsarSwh of
PSDsarPollingSw CSDsarSwh
R6CelPlmn isornot
PSDsarSwh
is
h,
0.
not
"0"
PagingLocaBarS PagingLocaBarS
wh
wh is valid only
when
PagingLocaBarS
CSDsarSwh
or
wh is valid only
PSDsarSwh
is
CSDsarSwh,
when
not
"0"
PSDsarSwh
CSDsarSwh
or
PSDsarSwh is
not "0"
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
CSDsarSwh
Valid only when

CSDsarSwh is
not 0
PSDsarSwh
PSDsarPollingSw
Network
h is valid only
Planing&Optimiz No
when
PSDsarSwh is
ation
not 0
Valid only when

CSDsarPollingSw CSDsarPollingSw Fixed-keep
h
h is set to
monitoring
"Polling"
Valid only when

PSDsarPollingSw
Network
PSDsarPollingSw
h of
Planing&Optimiz No
h is set to
UUtranCellFDD
ation
"Polling"
Network
Planing&Optimiz No
ation
No
100
PlmnNum of
utranCell
The summation
of this parameter
in the same cell Fixed
for all PLMN is
100%.
100
PlmnCodShaRat
of ULogicalCell
the sum of
Network
PlmnCodShaRat
Planing&Optimiz No
of all PLMN shall
ation
be 1
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
-10
N/A
N/A
Fixed
No
-90
N/A
N/A
Fixed
No
-10
N/A
N/A
Fixed
No
-90
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
3) if freqBandInd
= 2 (Band III) ,
uarfcnDl must be Network
band3: 1162..
Planing&Optimiz No
ation
1513,
uarfcnUl=uarfcnD
l-225;
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
-90
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
-90
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
14
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
16
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
16
N/A
N/A
Fixed
No
10
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Fixed
No
10
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
0.5
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
Not Used
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, N/A
1, 1]
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
MinNumofHspdsc
h <=
NumofHspdsch
<=
MaxNumofHspds
ch
MinNumofHspdsc
h <=
NumofHspdsch,
NumofHspdsch
MaxNumofHspdsc
<=
h
MaxNumofHspds
ch
MinNumofHspdsc
h <=
NumofHspdsch,
NumofHspdsch
MinNumofHspdsc
<=
h
MaxNumofHspds
ch
Valid only when
the setting of
HspaSptMeth,
HspaSptMeth
MaxEagchNum
supports HSUPA.
MaxEagchNum>
Valid
only when
=NumofEagch
the setting of
HspaSptMeth
HspaSptMeth,
supports HSUPA.
MaxErghichNum
MaxErghichNum
>=NumofErgHich
Valid
only when
.
HsSharMethod of
the NodeB that
HsSharMethod
controls the cell
is set to "RNC
Control"
MinNumofHspdsc
h,
MaxNumofHspdsc
h
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
700
N/A
N/A
Fixed-keep
monitoring
40
minHspaPwrRto,
maxHspaPwrRto
minHspaPwrRto
<= hspaPwrRatio
Fixed
<=
maxHspaPwrRto.
No
hspaPwrRatio,
maxHspaPwrRto
minHspaPwrRto
<= hspaPwrRatio Fixed-keep
<=
monitoring
maxHspaPwrRto.
No
70
minHspaPwrRto,
hspaPwrRatio
minHspaPwrRto
<= hspaPwrRatio
Fixed
<=
maxHspaPwrRto.
No
15
N/A
N/A
Fixed-keep
monitoring
No
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed-keep
monitoring
No
16
CodeUptHyA
0<=CodeUptHyA Fixed-keep
<=DpchCodeHy monitoring
No
16
DpchCodeHy
0<=CodeUptHyA Fixed-keep
<=DpchCodeHy monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
20
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
NumofEagch
MaxEagchNum> Fixed-keep
=NumofEagch
monitoring
No
NumofErgHich
MaxErghichNum Fixed-keep
>=NumofErgHich monitoring
No
18
EagchDnTHr <
EagchDnThr,
Network
EagchUpThr <=
UserNumPerEagc
Planing&Optimiz No
UserNumPerEag
h
ation
ch
10
EagchDnTHr <
EagchUpThr ,
Network
EagchUpThr <=
UserNumPerEagc
Planing&Optimiz No
UserNumPerEag
h
ation
ch
18
ErgHichDnThr
ErgHichUpThr >
ErgHichDnThr
Network
Planing&Optimiz No
ation
10
ErgHichUpThr
ErgHichUpThr >
ErgHichDnThr
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
MbmsSuptInd
Valid only when

MbmsSuptInd is
set to "1"
Fixed-keep
monitoring
No
80
N/A
N/A
Fixed
No
800
N/A
N/A
Fixed
No
MbmsSuptInd of
UtranCell
Only valid when

the cell supports
MBMS.
Fixed-keep
monitoring
No
44
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
uarfcnDl/FreqBan
dInd of
vsDataUtranCellF
DD of the cells
belonging
to theof
(1) The values
NodeBType of
same
frequency
uarfcnDl/FreqBan
UIubLink
Only valid
layer
of thewhen
same
To ToAWS of MO dInd of
the
cell service
supports
MBMS
vsDataUtranCellF
UCMbms:
MBMS.
area
must be the
MbmsSuptInd of DD of the cells
same
and to
equal
belonging
the
UUtranCellFDD
NodeBType of
to
the
same frequency
UIubLink
dUARFCN/FreqB
Only valid
layer
of thewhen
same
To ToAWS of MO andInd of
the cell service
supports
MBMS
UCMbms:
vsDataMbmsPLF
MBMS.
area
must be the
MbmsSuptInd of req. And these
same and equal
UUtranCellFDD
cells
to themust
support
MBMS
dUARFCN/FreqB
(MbmsSuptInd
of
andInd
of
N/A
N/A
vsDataUtranCellF
vsDataMbmsPLF
DD
1 orthese
2.
req.isAnd
(2)
cells must
The
value
of
support
MBMS
FreqBandInd
(MbmsSuptInd of
N/A
N/A
determines
the
vsDataUtranCellF
value
DD is range
1 or 2)of.
DUARFCN
as the
(2)
(1) The values of
following:
The
value of
uarfcnDl/FreqBan
The
value of
FreqBandInd
dInd
of
FreqBandInd
N/A
N/A
determines the
vsDataUtranCellF
The value
range
value
of
DD of range
the cells
of
DUARFCN
DUARFCN
as
the
belonging
to the
(1) The values
of
uarfcnDl of
following:
same
frequency
uarfcnDl/FreqBan
UtranCellFDD,
Band
I
The
layervalue
of theofsame
of
MbmsSuptInd of dInd
Band
I:
FreqBandInd
MBMS
service
vsDataUtranCellF
UtranCellFDD,
10562..10838
The value
range
area
must
be the
DD of the cells
dUARFCN of
of
DUARFCN
same
and
equal
belonging
UtranCellFDD
Band
II to the
uarfcnDl of
to
the frequency
same
Band
II:
UtranCellFDD,
Band
I 2:
dUARFCN/FreqB
layer
of the same
9662..9938,
412,
MbmsSuptInd of Band
andIndI: service
of
MBMS
437,
462,
487,
UtranCellFDD,
10562..10838
vsDataMbmsNPL
area
must562,
be the
512, 537,
FreqBandInd of
Freq.
And
these
same
and
equal
587, 612,
UtranCellFDD
Band
II 637,
cells
must
to the687
662,
Band
II: MBMS
2:
support
dUARFCN/FreqB
9662..9938,
412,
(MbmsSuptInd
of
andInd
Band
IIIof 487,
N/A
N/A
437, 462,
vsDataUtranCellF
vsDataMbmsNPL
Band
III: 1162..
512,is537,
DD
1 or562,
2.
Freq.
And
these
1513
587,
612, 637,
(2)
cells must
662,
687 of
The
value
support
Band
IV MBMS
FreqBandInd
(MbmsSuptInd
of
Band
IV:
Band
III 1537..
N/A
N/A
determines
the
vsDataUtranCellF
1738,
1887,
Band III:
1162..
value
DD
is range
11937,
or 2)of.
1912,
1513
DUARFCN
(2) 1987,as the
1962,
following:
The value
of
2012,
2037,
Band
IV
The
value
of
FreqBandInd
2062,
2087
Band
IV: 1537..
FreqBandInd
N/A
N/A
determines the
1738,
1887,
The value
range
value
range
of
Band
V
1912,
1937,
of
DUARFCN
DUARFCN
as
Band
4357..the
1962, V:
1987,
uarfcnDl of
following:
4458 ,2037,
1007,
2012,
UtranCellFDD,
Band
I
The value
of
1012,
1032,
2062,
2087
MbmsSuptInd of Band
I:
FreqBandInd
1037, 1062, 1087
UtranCellFDD,
10562..10838
The value range
Band V
dUARFCN of
of
DUARFCN
Band
Band VI
V: 4357..
UtranCellFDD
Band
II
uarfcnDl of
Band
4458 ,VI:
1007,
Band
II:
UtranCellFDD,
Band
I 2:
4387 ..4413,
1012,
1032, 412,
9662..9938,
MbmsSuptInd of 1037,
Band I:1062
1037,
1062,
1087
437,
462,
487,
UtranCellFDD,
10562..10838
512, 537, 562,
FreqBandInd of
Band
VIII
Band
VI 637,
587, 612,
UtranCellFDD
Band
II
Band
VIII:
Band687
VI:
662,
Band
II: 2:
2937..3088
4387 ..4413,
9662..9938, 412,
1037,
1062
Band
III
437, 462,
487,
Band
III: 1162..
512, 537,
562,
Band
VIII
1513
587, 612, 637,
Band VIII:
Fixed
No
Fixed
No
Fixed
No
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
[1, 0, 2, 3]
[0, 1, 2, 3]
[15, 14, 13, 0]
[4, 4, 4, 4]
if the value of
EFACHSPPTINDi
s "False", this
paramater is
N/A
N/A
invalid for the
correspongding
Cell
This parameter is
an array, the
EFACHSPPTIND element of which
is corresponding
iftothe
of of
thevalue
element
EFACHSPPTINDi
array
sMACehsQID;
"False", this the
paramater
calue
of is
N/A
N/A
invalid
for thecan
macehsQID
correspongding
not be the same
Cell
for the same
This
array.parameter is
an array, the
EFACHSPPTIND element of which
is corresponding
to the element of
array
MACehsQID, the
value
N/A
N/A of
SPI[DBS_RR_M
AX_NUM_PRIOR
_QUEUE] can
not be the same.
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
[2, 2, 2, 2]
N/A
N/A
Fixed
No
[4, 4, 4, 4]
N/A
N/A
Fixed
No
[1, 1, 1, 1]
N/A
N/A
Fixed
No
[15, 23, 23, 23]
N/A
N/A
Fixed
No
[124, 124, 124,

600]
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
24
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
1024
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
15.1
N/A
N/A
Fixed-keep
monitoring
No
64
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
10240
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
PrachCPCId of
Rach must exist
in Prach.
68
(1)
PrachCPCId
of
availSubChanNu
Aich must exist in
m
of
Prach.
vsDataPrach
availSubChanNu
shall be 4095,
mof vsDataPrach,
0
and there is only
PreamScraCode
one vsDataPrach
of vsDataPrach
If
the scrambling
(prachType
is
codes
of 1)
different
equal to
in one
PRACH
of the
vsDataUtranCellF
same
cell
are
DD
1
N/A
N/A
different, it
should
be of
The value
guranteed
that
AsigStIdx and
the
available
AsigEndIdx
[1, 1, 1, 1, 1, 1, 1,
subchannels
of
AsigStIdx,
should be smaller
1, 1, 1, 1, 1, 1, 1,
these
PRACH
AsigEndIdx
than the max bit
1, 1]
are
notof
index
overlapped.
Signature whose
If
the scrambling
value
is 1.
codes of different
[1, 1, 1, 1, 1, 1, 1, PreamScraCode,
PRACH of the
1, 1, 1, 1, 1]
PrachType
same cell are the
same, it should
be guranteed that
either the
signature
or the
0
N/A
N/A
available
subchannels or
PsfNum<=
both
of thesePermitMaxASC"AsigEndIdx
PRACH
not
2;
AsigStIdxare
+ 1"
overlapped.
If
should be smaller
3
PsfNum
AvailSubChanNu
PermitMaxASCthan or equal to
m
shoule
beof "1"
2<0,
PsfNum
the
number
"111111111111"
should
be
set toif
in Signature
PrachType
0.
"AsigEndIdx
AsigStIdx<== -1.
AsigEndIdx,
AsigStIdx
+ 1"
AsigEndIdx.
[0, 0, 0]
Signature,
should
be
smaller
The maximum
PermitMaxASC
than
or
equal
to
length of
the
number of "1"
AsigEndIdx
in
Signature
equals
to 8 and
AsigStIdx,
AsigStIdx<=
the valid element
[15, 15, 15]
Signature,
AsigEndIdx.
number is
PermitMaxASC
The
maximum
defined
by
The
maximum
length
of
PermitMaxASC
length
of equals
AsigStIdx
AsubChNum
to 8 and the valid
equals
8 and
elementtonumber
[15, 15, 15]
PermitMaxASC
the
valid element
is defined
by
number
is
PermitMaxASC
PsfNum<=
defined
by
PermitMaxASCPermitMaxASC
2;
PermitMaxASC of If
1
UPrach
PermitMaxASC2<0, PsfNum
should be set to
0.
PrachCPCId of
Rach,
PrachCPCId of
Aich
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
[0.9]
N/A
N/A
Fixed
No
[0, 0, 0, 0, 0, 0, 0] N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
-21
N/A
N/A
Network
Planing&Optimiz No
ation
-21
rachTTI
In different
vsDataPrach of a
Network
cell, the constVal
Planing&Optimiz No
must be same
ation
when rachTTI is
same.
N/A
N/A
Fixed
No
40
N/A
N/A
Fixed
No
65
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
132
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
164
N/A
N/A
Fixed
No
18
N/A
N/A
Fixed
No
-6
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
Yes
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
62
ulOverLdThr,
ulRecoverLdThr
ulSeriousOverLd
Thr >
Fixed
ulOverLdThr >
ulRecoverLdThr
No
61
ulSeriousOverLd
ulSeriousOverLdT
Thr >
hr,
Fixed
ulOverLdThr >
ulRecoverLdThr
ulRecoverLdThr
No
57
ulSeriousOverLd
ulSeriousOverLdT Thr >
Fixed
hr, ulOverLdThr
ulOverLdThr >
ulRecoverLdThr
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
100
dlOverLdThr,
dlRecoverLdThr
Fixed
No
95
dlSeriousOverLdT
hr,
dlRecoverLdThr,
hsdschOverLdThr,
hsdschRecoverTh
r
Fixed-keep
monitoring
No
85
dlSeriousOverLdT
hr, dlOverLdThr
Fixed-keep
monitoring
No
dlSeriousOverLd
Thr >
dlOverLdThr
>
1)
dlRecoverLdThr
dlSeriousOverLd
Thr >
dlOverLdThr >
dlRecoverLdThr
2)
hsdschOverLdTh
r>
hsdschRecoverT
dlSeriousOverLd
hr
Thr> >dlOverLdThr
dlOverLdThr >
dlRecoverLdThr
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
98
hsdschOverLdThr
>
hsdschRecoverTh
r > dlOverLdThr
hsdschOverLdTh
r>
Fixed-keep
hsdschRecoverT monitoring
hr > dlOverLdThr
No
96
hsdschOverLdTh
hsdschOverLdThr, r >
Fixed-keep
dlOverLdThr
hsdschRecoverT monitoring
hr > dlOverLdThr
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
RtwpLoadHighTh
d>
RtwpLoadMidThd
>
RtwpLoadLowTh
d
RtwpLoadHighTh
d>
RtwpLoadMidThd
>
RtwpLoadLowTh
d
RtwpLoadHighTh
d>
RtwpLoadMidThd
>
RtwpLoadLowTh
d
TCPLoadHighTh
d>
TCPLoadMidThd
>
TCPLoadLowThd
TCPLoadHighTh
d>
TCPLoadMidThd
>
TCPLoadLowThd
TCPLoadHighTh
d>
TCPLoadMidThd
>
TCPLoadLowThd
Don't Care
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
RtwpLoadHighTh
d,
RtwpLoadMidThd
RtwpLoadHighTh
d,
RtwpLoadLowThd
10
RtwpLoadMidThd,
RtwpLoadLowThd
40
TCPLoadHighThd
, TCPLoadMidThd
70
TCPLoadHighThd
,
TCPLoadLowThd
90
TCPLoadMidThd,
TCPLoadLowThd
Fixed-keep
monitoring
No
64
CodeLoadMidTh
d>
Fixed-keep
CodeLoadMidThd
CodeLoadLowTh monitoring
d
No
96
CodeLoadMidTh
CodeLoadLowTh d>
Fixed-keep
d
CodeLoadLowTh monitoring
d
No
40
CELoadMidThd
CELoadMidThd> Fixed-keep
CELoadLowThd monitoring
No
70
CELoadLowThd
CELoadMidThd> Fixed-keep
CELoadLowThd monitoring
No
26
DPAUNumMidTh
d>
Fixed-keep
DPAUNumMidThd
DPAUNumLowTh monitoring
d
No
50
DPAUNumMidTh
DPAUNumLowTh d>
Fixed-keep
d
DPAUNumLowTh monitoring
d
No
26
UPAUNumMidTh
d>
Fixed-keep
UPAUNumMidThd
UPAUNumLowTh monitoring
d
No
50
UPAUNumMidTh
UPAUNumLowTh d>
Fixed-keep
d
UPAUNumLowTh monitoring
d
No
32
MBMSUNumMid
MBMSUNumMidT Thd>
Fixed-keep
hd
MBMSUNumLow monitoring
Thd
No
60
MBMSUNumMid
MBMSUNumLow Thd>
Fixed-keep
Thd
MBMSUNumLow monitoring
Thd
No
80
SigUNumMidThd
Fixed-keep
SigUNumMidThd >
monitoring
SigUNumLowThd
No
150
SigUNumMidThd
Fixed-keep
SigUNumLowThd >
monitoring
SigUNumLowThd
No
N/A
N/A
N/A
Fixed
No
36
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
100
N/A
N/A
Fixed
No
18
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
No
direction, srvInd
N/A
For
N/A the MBMS
Fixed
services
(srvInd=1) ,
direction can only
be 1 (Downlink) ,
domain can only
Fixed
be 1 (PS
Domain) ,
trafficClass can
only be 1
(streaming) or 3
N/A
Fixed
(background) .
13600
maxBitRate
13600
minBitRate<=
maxBitRate
1) When srvType
is even, direction
must be Uplink;
when
srvType is
minBitRate<=
minBitRate
odd,
direction
maxBitRate
must be
Downlink.
2) For the MBMS
services
the MBMS
srvType, domain, For
(srvInd=1)
,
services
direction can only
(srvInd=1)
,
be 1 (Downlink)
,
direction
can
only
domain can only
be
,
be 1
1 (Downlink)
(PS
srvInd, direction, domain
can
only
Domain)
,
For the MBMS
trafficClass
be
1 (PS can
trafficClass
services
Domain)
only be 1, ,
(srvInd=1)
trafficClass
(streaming)
oronly
3
direction
cancan
only
be
1
(background)
. ,
be
1 (Downlink)
(streaming)
3
domain can or
only
SrvInd, Domain
(background)
.
be 1 (PS
Domain) ,
trafficClass can
only be 1
(streaming) or 3
N/A
N/A
(background) .
No
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed
No
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
7.5
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[0, 1]
N/A
N/A
Fixed-keep
monitoring
No
[13, 13]
N/A
N/A
Fixed-keep
monitoring
No
[-1, -2]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[0, 1]
N/A
N/A
Fixed-keep
monitoring
No
[13, 13]
N/A
N/A
Fixed-keep
monitoring
No
[-1, -2]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[0, 1]
N/A
N/A
Fixed-keep
monitoring
No
[6, 10]
N/A
N/A
Fixed-keep
monitoring
No
[0, -1]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[5, 6]
N/A
N/A
Fixed-keep
monitoring
No
[10, 10]
N/A
N/A
Fixed-keep
monitoring
No
[1200, 800]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[5, 6]
N/A
N/A
Fixed-keep
monitoring
No
[10, 10]
N/A
N/A
Fixed-keep
monitoring
No
[1200, 800]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
[0, 1]
N/A
N/A
Fixed-keep
monitoring
No
[13, 13]
N/A
N/A
Fixed-keep
monitoring
No
[0, -2]
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Fixed-keep
monitoring
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
No
geranPriority,
eutranPriority
14
N/A
utranPriority[],
geranPriority[]
and
eutranPriority[]
should not be
equal, but the
priority in the
same RAT can
be euqal.
N/A
14
N/A
N/A
Network
Planing&Optimiz No
ation
-18
N/A
N/A
Fixed-keep
monitoring
No
-115
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
utranPriority,
eutranPriority
-115
N/A
N/A
utranPriority[],
geranPriority[]
and
eutranPriority[]
should not be
equal, but the
priority in the
same RAT can
be euqal.
N/A
14
N/A
14
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
N/A
1) utranPriority[],
geranPriority[]
and
eutranPriority[]
N/A
should not be
equal, but the
priority in the
same RAT can
be euqal.
2) If
ThreshRsrqInd[X]
=False and
ThreshRsrqInd[Y]
=True, then
N/A
EutranPriority[X]!
=
EutranPriority[Y].
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
utranPriority,
geranPriority,
ThreshRsrqInd
N/A
14
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Network
Planing&Optimiz No
ation
14
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Network
Planing&Optimiz No
ation
-116
N/A
N/A
Fixed-keep
monitoring
-18
N/A
N/A
Network
Planing&Optimiz No
ation
EutranPriority
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
No
If
ThreshRsrqInd[X]
=False and
Network
ThreshRsrqInd[Y]
Planing&Optimiz No
=True,
ation
EutranPriority[X]!
=
EutranPriority[Y]
Network
N/A
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
50
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
50
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
50
N/A
N/A
Fixed-keep
monitoring
No
50
N/A
N/A
Fixed-keep
monitoring
No
45
N/A
N/A
Fixed-keep
monitoring
No
42
N/A
N/A
Fixed-keep
monitoring
No
45
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
40
N/A
N/A
Fixed-keep
monitoring
No
40
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed
No
Fixed-keep
monitoring
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
Fixed-keep
monitoring
No
[29, 27, 25, 20,

15, 11, 8, 5, 2]
Fixed
No
Fixed-keep
monitoring
No
1.when all values

of
0
N/A
N/A
HOLDHSPAPLU
BALSW,
RABHSPAPLUB
HOLDHSPAPLUB
ALSW,
ALSW,
[0, 1, 2, 3, 4, 5, 6,
RRCDUALCARR
RABHSPAPLUBA
7, 8]
SW are "Off" ,
LSW,
HSPAPLUSCAPI
RRCDUALCARR
ND is invalid.
SW
2.HspaPlusCapIn
d [x] is
[0, 0, 0, 0, 0, 0, 0,
unique.Every
N/A
N/A
0, 0]
element is
different
-105
1.when all values

of
N/A
HOLDHSPAPLU
BALSW,
RABHSPAPLUB
HOLDHSPAPLUB
ALSW,
ALSW,
RRCDUALCARR
RABHSPAPLUBA
SW are "Off" ,
LSW,
HSPAPLUBALCA
RRCDUALCARR
PPRI is invalid.
SW
2.HspaPluBalCap
Pri [x]is
unique.Every
N/A
N/A
element's priority
is different
-13
N/A
N/A
Fixed-keep
monitoring
No
-108
N/A
N/A
Fixed-keep
monitoring
No
-13
N/A
N/A
ldBalHsdCodFac
Cho,
ldBalHsdPwrFac
Cho,
ldBalHsdBandWi
dFacCho can not
ldBalHsdCodFac
be
0 at the same
Cho,
time.
ldBalHsdPwrFac
Cho,
ldBalHsdBandWi
dFacCho can not
ldBalHsdCodFac
be
0 at the same
Cho,
time.
ldBalHsdPwrFac
Cho,
ldBalHsdBandWi
dFacCho can not
be 0 at the same
time.
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
ldBalHsdPwrFacC
ho,
ldBalHsdBandWid
FacCho
ldBalHsdCodFac
Cho,
ldBalHsdBandWid
FacCho
ldBalHsdCodFac
Cho,
ldBalHsdPwrFacC
ho
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
12:00:00 AM
N/A
N/A
Fixed-keep
monitoring
No
12:00:00 AM
N/A
N/A
Fixed-keep
monitoring
No
[0, 0, 0, 0, 0, 0, 0,
N/A
0, 0]
N/A
Fixed-keep
monitoring
No
RabAssSBSw
If RabAssSBSw
is "off", this
parameter is
invalid.
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
70
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
128
N/A
N/A
Network
Planing&Optimiz No
ation
16
N/A
N/A
Network
Planing&Optimiz No
ation
32
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
128
N/A
N/A
Network
Planing&Optimiz No
ation
16
N/A
N/A
Network
Planing&Optimiz No
ation
32
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
100
N/A
N/A
Network
Planing&Optimiz No
ation
10
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
[0, 1, 2, 3, 4, 5, 6,
N/A
7, 8, 9, 10, 11, 12]
N/A
Fixed
No
[56, 72, 87, 96,

111, 120, 135,
144, 159, 171,
183, 195, 207]
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
Yes
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
if the related
parameter in
R_DUMODECFG
is 2,
AmrServHoStra
is 0.
if the related
parameter in
R_DUMODECFG
is 3,
AmrServHoStra
is 1.
ifN/A
the related
parameter in
R_DUMODECFG
is 4,
AmrServHoStra
is 2.
N/A
if the related
parameter in
R_DUMODECFG
is 5,
AmrServHoStra
N/A
is 1.
if the related
parameter in
R_DUMODECFG
is 6,
AmrServHoStra
N/A
is 2.
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
15
N/A
N/A
Fixed-keep
monitoring
No
AmrServHoStra
N/A
N/A
N/A
N/A
N/A
N/A
12000
N/A
N/A
Fixed-keep
monitoring
No
8000
N/A
N/A
Fixed-keep
monitoring
No
8000
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
46
N/A
N/A
Fixed-keep
monitoring
No
20
N/A
N/A
Fixed-keep
monitoring
No
1500
N/A
N/A
Fixed-keep
monitoring
No
10
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
65535
N/A
N/A
Network
Planing&Optimiz No
ation
Band 5: 24002649;
EutranFreqBandI
nd is 5 (Band 6) ,
then Dlearfcn is
Band 6: 26502749;
65535
N/A
N/A
EutranFreqBandI
nd is 6 (Band 7) ,
then Dlearfcn is
Band 7: 27503449;
EutranFreqBandI
N/A
N/A
N/A
nd is 7 (Band 8) ,
then Dlearfcn is
Band 8: 34503799;
EutranFreqBandI
N/A
N/A
N/A
nd is 8 (Band 9) ,
then Dlearfcn is
Band 9: 38004149;
EutranFreqBandI
N/A
N/A
N/A
nd is 9 (Band 10)
, then Dlearfcn is
Band 10: 41504749;
EutranFreqBandI
[1, 1, 1, 1, 1, 1, 1,
nd
1, 1, 1, 1, 1, 1, 1, N/A
N/Ais 10 (Band
11) , then
1]
Dlearfcn is Band
11: 4750-4999;
EutranFreqBandI
nd is 11 (Band
65535
N/A
N/A
12) , then
Dlearfcn is Band
12: 5000-5179;
EutranFreqBandI
nd is 12 (Band
65535
N/A
N/A
13) , then
Dlearfcn is Band
13: 5180-5279,
EutranFreqBandI
nd is 13 (Band
14)
N/A
N/A
N/A , then
Dlearfcn is Band
14: 5280-5379;
EutranFreqBandI
nd is 16 (Band
17)
N/A
N/A
N/A , then
Dlearfcn is Band
17: 5730-5849;
EutranFreqBandI
nd is 17 (Band
18) , then
N/A
N/A
N/A
Dlearfcn is Band
18: 5850-5999;
EutranFreqBandI
nd is 18 (Band
19) , then
EutranFreqBandI
N/A
Dlearfcn is Band
nd
19: 6000-6149;
EutranFreqBandI
nd is 19 (Band
20) , then
Dlearfcn
is Band
N/A
N/A
N/A
20: 6150-6449;
EutranFreqBandI
nd is 20 (Band
21) , then
Dlearfcn is Band
21: 6450-6599;
EutranFreqBandI
nd is 22 (Band
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
N/A
Fixed
N/A
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
ImeiLen
The number of
ImeiDigit
configured is
determined by
the value of
ImeiLen
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Network
Planing&Optimiz No
ation
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Don't Care
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed-keep
monitoring
No
No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Band 7: 27503449;
EutranFreqBandI
nd is 7 (Band 8) ,
then Dlearfcn is
Band 8: 34503799;
EutranFreqBandI
N/A
N/A
nd is 8 (Band 9) ,
then Dlearfcn is
Band 9: 38004149;
EutranFreqBandI
N/A
N/A
nd is 9 (Band 10)
, then Dlearfcn is
Band 10: 41504749;
EutranFreqBandI
nd
N/A
N/Ais 10 (Band
11) , then
Dlearfcn is Band
11: 4750-4999;
EutranFreqBandI
nd is 11 (Band
N/A
N/A
12) , then
Dlearfcn is Band
12: 5000-5179;
EutranFreqBandI
nd is 12 (Band
N/A
N/A
13) , then
Dlearfcn is Band
13: 5180-5279,
EutranFreqBandI
nd is 13 (Band
14)
N/A
N/A , then
Dlearfcn is Band
14: 5280-5379;
EutranFreqBandI
nd is 16 (Band
17)
N/A
N/A , then
Dlearfcn is Band
17: 5730-5849;
EutranFreqBandI
nd is 17 (Band
18) , then
N/A
N/A
Dlearfcn is Band
18: 5850-5999;
EutranFreqBandI
1)
nd DlEARFCN[]
is 18 (Band
corresponds
to
19) , then
EutranFreqBandI EutranDePriority[]
Dlearfcn is Band
nd
.19: 6000-6149;
2)
EutranFreqBandI
EutranDePriority[]
nd is 19 (Band
,20) , then
DlEARFCN[],
UtranDePriority[]
UtranDePriority[] , Dlearfcn is Band
,20:
GsmDePriority[]
6150-6449;
GsmDePriority[]
should
not be
EutranFreqBandI
equal,
but
the
nd is 20
(Band
priority
in
the
21) , then
same
RAT
Dlearfcn
is can
Band
N/A
N/A
be
21:euqal.
6450-6599;
EutranFreqBandI
nd is 22 (Band
23) , then
Dlearfcn is Band
N/A
N/A
23: 7500-7699;
EutranFreqBandI
nd is 23 (Band
24) , then
Dlearfcn is Band
24: 7700-8039;
EutranFreqBandI
nd is 24 (Band
25) , then
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
Fixed
No
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
N/A
FreqBandInd
N/A
DlUARFCN[],
EutranDePriority[]
, GsmDePriority[]
N/A
N/A
N/A
N/A
N/A
GsmBand[],
UtranDePriority[] ,
EutranDePriority[]
N/A
N/A
(Band III) ,
DlUARFCN must
be band 3: 1162..
1513, ;
4) If freqBandInd
is
(Band V) ,
1) 4DlUARFCN[]
DlUARFCN must
corresponds
to
be
band 5: 4357..
UtranDePriority[].
4458
, 1007,
2)
1012,
1032,
EutranDePriority[]
1037,
1062,
,
1087,
;
UtranDePriority[]
If
,5)GsmDePriority[]
freqBandInd=5
should not be
(Band
equal, VI)
but ,the
DlUARFCN
priority in themust
be
band
6: can
same
RAT
4387
..4413,
be
euqal.
N/A
1037, 1062, ;
6) If freqBandInd
=7 (Band VIII) ,
1)
DlUARFCN must
GsmBand[]corres
be 2937..3088, ;
ponds
N/A
7) If to
GsmDePriority[].
freqBandInd=3
2)
(Band IV) ,
EutranDePriority[]
DlUARFCN must
,be 1537.. 1738,
UtranDePriority[]
1887, 1912,
,1937,
GsmDePriority[]
1962,
should
not be
1987, 2012,
equal,
but the
2037, 2062,
priority
2087, . in the
same RAT can
N/A
be euqal.
N/A
N/A
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Network
Planing&Optimiz No
ation
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Fixed
No
N/A
N/A
Network
Planing&Optimiz No
ation
Function
Switch
Configuration Rule and

Adjustment Suggestion
Default Value Configuration

Reason
Change take
effect
No
Parameter Function: This

parameter is RNC
Configuration Object ID.It is
unique under its parent
object.
N/A
can not be
modified
N/A
Defined By MO Model
N/A
N/A
N/A
N/A
N/A
New users
N/A
No
No
No
No
No
No
No
No
Function of this parameter:

configure
the network
User Planning
Data sharing
mode
Factors of consideration:
network sharing mode .
function
of this parameter:
MOCN: support
shared
Configure
NEIDand
of NE
carrier
sharing
dedicated
Factors
of consideration:
it's
carrier sharing,
RNC connect
configured
according
to
the
multi operator CN, and RNC
netork
planning for
result
select operator
nonsupporting UE
GWCN: support
shared
Parameter
Function:
This
carrier
sharing
and dedicated
parameter
indicates
the
Function:
Used The
for indicating
carrier
sharing,
CN can,
method
of
PLMN
selection
the
type
of
transport
channel
be
shared
by
multi
operator,
when
MOCN israte
used
for
and
signalling
for
and
CN select
operatorinitial
for
network
sharing
RRC
connectionUE
setup.
non-supporting
Configuration
Rule:
It needs
MultiPlmn:
only
support
when
MOCN
is utilization
used
for of
to
consider
the
dedicated
carrier ifsharing,
network
sharing,
PS
and
radio
resource
and
the
call CS
RNC
route
UE to
the
operator
domain
registration
time
delay.
the
cell
belong
coordination
is to
implemented
Adjustment
Suggestion:
0xFF:
network
sharing is
isHigh
not
by
CN,
this
parameter
set
rate
signalling
can
effective
used.
the value
must
be 0xFF
1;
otherwise,
this
parameter
is
speed
up network
the establishment
when
the
sharing
set
0
process
RRC
connection, it
feature isofnot
licensed
can decrease the call time
delay,
but in
it also
occupies
It is used
AGPS
more
radio
resource
than low
positioning. It is configured
rate
signalling.
It is
according
to AGPS
recommended
to useishigh
when
this parameter
information
attainment
from
Function:
Non-Conversational
rate
signalling
because
the
configured,
it
needs
to think
RNC or reference network.
service
Maximum
MAC-dis
alone
process
of
the signalling
Load
information
PDU
Size
Extended
very short.
Validity
in the
configured
Configuration
It needs
duration.If the Rule:
duration
is too
to
consider
the
header
long, the load information
consumption
and
the quality
validity is not
guaranteed,
and
Function:
Conversational
of
service.
ifservice
the
duration
is
too
short, the
Maximum MAC-d
The
of the can't
parameter
is
load
information
be fully
PDUvalue
Size Extended
larger,
used. the header
Configuration
Rule: It needs
consumption
is header
smaller, and it
to consider the
save
resource;
but
it isquality
easier
consumption and the
to
result
in
PDU
transmission
of service.
mistake
when
theparameter
radio
The value
of the
is
channelthe
quality
becomes bad.
larger,
header
The
value of the
parameter
consumption
is smaller,
andisit
smaller,
the
header
save resource; but it is easier
consumption
is larger,
and it's
to result in PDU
transmission
a
waste
of
resource.
mistake when the radio
channel quality becomes bad.
The value of the parameter is
smaller, the header
consumption is larger, and it's
a waste of resource.
The default value is decided

by the factor that no network
New users
sharing is used in most
networks
in most networks, CN don't
implemented PS and CS
domain registration
coordination
New connection
The reason of the

parameter's default value is
to try best to decrease the
call time delay.
At next use
N/A
not updtae except

power on
At next use (i.e.,

consider both the Validity and
shall not affect
synchronization frequency of
ongoing
the cell load.
connections)
The reason of the
to consider the header
consumption and the quality
of service.
The reason of the
of service.
New service
setup or
reconfiguration
Immediately
No
No
No
No
No
No
Yes
No
No
Yes
No
Yes
maximum MAC-d PDU size

extended
Related Factor: The header
consumption
and the quality
Function: Uplink
of
service.
conversational
service
The
valueMAC-d
of the parameter
minimum
PDU size is
larger,
the
header
extended
consumption
is smaller,
and it
Related Factor:
The header
saves
resources;
but
it
is
consumption
andnonthe quality
Function:
Uplink
easier
to result
in PDU
of
service.
conversational
service
transmission
mistake
when
The
value MAC-d
of the
parameter
maximum
PDU size is
the
radio
channel
quality
larger,
the header
extended
becomes
bad.is smaller, and it
consumption
Related
Factor:
header is
The
value
of theThe
parameter
saves
resources;
but
itquality
is
consumption
and
the
Function:
Uplink
nonsmaller,
header
easier
tothe
result
in PDU
of
service.
conversational
consumption mistake
is service
larger,when
and it's
transmission
The
value
of
the parameter
minimum
MAC-d
PDU
size is
a
waste
of
resources.
the
radio
channel
quality
larger,
the
header
extended
becomes
bad.is smaller, and it
consumption
Related
Factor:
header is
The
value
of theThe
parameter
saves
resources;
but
itquality
is
consumption
and
the
smaller,
header
easier
tothe
result
in PDU
of
service.
consumption mistake
is larger,when
and it's
transmission
The
value
of
the
parameter is
Function:
This
parameter
a
waste
ofchannel
resources.
the
radio
quality
larger,
thethe
headerconfiguration
indicates
becomes
bad.RV
consumption
is smaller,
andE-it
selected
byofRNC
when the
The
value
the parameter
is
saves
resources;
but
it
is
DCH
Harq
Combining
smaller,
the
header
easier to result
in
PDU
Capability
IE in
AUDIT
Function:
This
consumption
isparameter
larger,when
and it's
transmission
mistake
RESPONSE
returned
bybit
indicates
the
maximum
a
waste
ofchannel
resources.
the
radio
quality
NodeB
the value
of for
'IR
rate
withtakes
HS-SCCH
Less
becomes
bad.
and
Chase
Combining
Non-VoIP/AMR.
The
value of the parameter is
Capable'.
Configuration
Rule:
smaller,
the header
Configuration
Rule: According
Considering
together
consumption
is larger,cell
andand
it's
to
the gain
comparison
service
throughput,
gain
a
waste ofCC
resources.
between
and
IR.
brought by HS-SCCH Less.
It
concluded
by is
simulation
If is
This
parameter
set too
that
using
IR
obtains
more
large, code number will
retransmission
combination
Parameter
function:
the
become the bottleneck and
gain than
using
CC. will call
switch
of the
emergency
transmission
power
Function:
Switch
of Non
RRC
redirection
function.
increase
so
as
to
make the
Emergency CS Service
Parameter
controlling
factor:
user
throughput
and
cell
Access to CELL_FACH
On
If
GSM
can
provide
more
throughput
decrease.If
the
Function:
This
parameter
RRC
accurate
service,
parameterlocation
is Amr
too
small,
thethis
specifies
the
cutIt decision
Configuration
Rule:
needs
parameter
can
be
set
to
1 for
advantage
HS-SCCH
when
IuUP of
version
including
to
consider
thethe
user
higher
location
quality,
or
else
less
will
be
not
obvious.
V1+V2 in the
inter-RAT
case.
experience
and
the
itsuccessful
shall
be
set
to
0.
Configuration
Rule:
The
ratio
of RRC
parameter
indicates
whether
connection.
Function: This
parameter
to
cut
AMR
set
or
not
when
The
reason
of
adding
the
specifies the Amr cut decision
both
Verion1
and
Version2
parameter
is
for
IPHONE,
if
are
supported
by
the
CN
RRC
is
established
on
the
V1+V2 in the intra-RAT case.
during
the 2G
to 3G
Cell_FACH
state
forThe
IPHONE,
Configuration
Rule:
Relocation
procedure.
itparameter
will have indicates
noise
voice
when it
whether
triggers
a CS
to cut AMR
setservice
or not and
when
transfers
fromand
Cell_FACH
both Verion1
Version2to
Cell_DCH.
are supported
by the CN in
Function:
inter-frequency
To
the function,
the
theturn
RABonassignment
measurement
timer or ifintra
admission
for
RRC
system
Relocation
procedure.
Configuration Rule: service
connection
on DCH is failed,
performance
RRC connection
is allowed is
to
When
IFORRATHOSWCH
be
on thevalue is
"3",established
If the parameter
Cell_FACH
state,
and itintercan
smaller, RNC
will stop
increase
the
successful
Function:
Dual
Carrier
frequency measurementratio
and
of
RRC
connection,
but
it
Redirection
Strategyeasily.
Switch.
start
inter-handover
can't
avoid the
noise voice for
Configuration
Rule:
adjustment
suggestion:
IPHONE.
To
turn
on scenario,
the function,
For
some
UE UE
can't
To
turn
off the function,
if the
can
beinter-frequency,
redirected
to adjacent
report
then
admission
for RRC
cell
support
DC-HSDPA,
this that
parameter
should
be set
on
DCH
failed,
itconnection
can
provide
better
user
suitable value, whichis
can
only
emergency
RRC
experience.
handover UE to GSM and
connection
is allowed
be
To
turncall
offdrop.
the
function,toUE
avoid
established
on the Cell_FACH
can't
be redirected
to
state,
andcell
it will
the
adjacent
thatdecrease
support DCsuccessful ratio of RRC
HSDPA.
connection, but it can avoid
the noise voice for IPHONE.
The header consumption and

the quality of service are
New connection
considered to define this
parameter.
New connection
parameter.
New connection
parameter.
parameter.
It is concluded by simulation
that using IR obtains more
retransmission combination
gain than using CC. So
default value is set to 'RV
Table'.
New connection
At next use (i.e.,

shall not affect
ongoing
connections)
At next use (i.e.,

Considering together cell and
shall not affect
service throughput, gain
ongoing
brought by HS-SCCH Less.
connections)
N/A
At next use
Cutting Amr set is more

compatible for inter-RAT
cases.
Take effect for the

next call
For intra-RAT cases, usually,

the related equipment are our Take effect for the
products, so not cutting Amr next call
is selected.
The reason of the
to try best to increase the
successful ratio of RRC
connection.
Immediately
Network planning is taken

At next use
into account in default value.
The parameter should be set

Immediately
based on the actual scene.
No
NO
NO
No
NO
No
N/A
No
No
No
Yes
No
the
number of RRC
CONNECTION
SETUP
CONNECTION
SETUP
message; system
cost.
message;
system
cost. is,
The
biggerThis
the parameter
parameter
Function:
The
smaller
the
parameter
is,
the
biggerthe
themaximum
number of RRC
indicates
the
bigger
the
number
of
RRC
CONNECTION
SETUP
number of UE in a cell whose
CONNECTION
message
is andSETUP
thewill
higher
transport resource
be
message
is
and
the
higher
the
system
cost
is,
However,
released while transport
path
the
system
costofis,UE
However,
The
probability
is overload.
The
probability
of UE
receiving
RRCRule:
Configuration
The
receiving
RRC
Main
function:
This
parameter
CONNECTION
SETUP
parameter should
be
setand
CONNECTION
SETUP
can
indicates
the
maximum
the
rate
of
setting
the
RRC
Parameter
the
according tofunction:
the actual
be
increased.
number
of
retransmissions
of
CONNECTION
successfully
maximum
number
of
configuration of the transport
The
bigger
the
Main
function:
the
RRC
CONNECTION
can
be
increased.
retransmissions
of
the
RRC
resource.
This
parameter
indicates
the
RELEASE.
The smaller
the RELEASE
parameter
is,
CONNECTION
time
gap
between
current
Influence
factor:
The
the smaller the
number
COMPLETE.
For
details,of
time
of
sending
the
RRC
probability
oftoUE
receiving
RRC
CONNECTION
SETUP
please
refer
"Parameter
CONNECTION
SETUP
and
RRC
CONNECTION
message
is
and
the
lower
the
Description".
the
retransmissions
time.
RELEASE;
the
number
ofThe
system
costcontrolling
is, However,
Parameter
factor:
Influence
factor:
RRC
CONNECTION
probability
ofrate
UE The
receiving
the
success
and
time
probability
of
UE receiving
RELEASE
message;
system
RRC CONNECTION
SETUP
delay
of the RRC
connection
RRC
CONNECTION
cost.
and the
rate of settingSETUP;
the
release.
the
number
of RRC
The
bigger
the
parameter
RRC
CONNECTION
The larger parameter
valueis,
CONNECTION
SETUP
the
bigger
thecan
number
of RRC
successfully
be
helps
to increase
the success
message;
system
cost.
CONNECTION
RELEASE
decreased.
rate
of
the
RRC
connection
Function: Max CS Delay
The
the
parameter
message
is and
the
higher
If thesmaller
number
ofHSPA.
RNC is,
release,
may
cause
when
CSbut
over
bigger
the
number
of RRC
the
system
cost
is,
However,
resent the message
RRC
excessive
Configuration
Rule: It needs
CONNECTION
SETUP
The
probability
of
UE
CONNECTION
SETUP
retransmission
the Uu
to
consider
the in
quality
of and
Function:
Delay
time
message
is
and
the
receiving
RRC
message
is
equal
to higher
increase
the
time
delay
of
service
.
threshold
ofcost
D/D->HS/D
orthe
the
system
is,
However,
CONNECTION
RELEASE
RrcSetupRetraNum
andtothe
RRC
connection
release.
This
parameter
is
used
HS/E
after
HS/DoforUE
HS/E
The
probability
can
increased.
RNC
hasn't
receive
RRC
The
smaller
parameter
value
helpbe
UE
managing
the
de->D/D
triggering
by
channel
receiving
RRC
Function:
Wait
timer
for
The
smaller
the SETUP
parameter
is,
CONNECTION
helps
to
decrease
the
Uu
jitter
buffer.
quality.
CONNECTION
SETUP
and
increase
rate
of
uplink
and
the
smaller
the
number
of
COMPLETE,
the
RNC
messages,
decrease
the
time
If
the
value
of
this
parameter
Configuration
Rule:
It needs
the
rate
of
setting
the
downlink
reconfiguration
by
RRC
CONNECTION
consider
the
RRC
delay
of
the
RRC
connection
is
too
large,
the
time
ofRRC
the
to
consider
the
user
CONNECTION
successfully
one
step,
it
can
reduce
the
RELEASE
message
is
and
CONNECTION
SETUP
release
and
let
UE
maximum
buffering
ofratio
theto
experiences
and
thegoing
of
can
be
times
ofincreased.
reconfiguration.
the
lower
the
system
cost
procedure
failed.
IDLE
a.s.a.p.,
but
it
may
voice
frames
in
PDCP
is is,
call
drops.
Function:
Wait
timer
for
The
bigger
the
parameter
is,
Configuration
Rule:
It
needs
However,
The
probability
of
decrease
success
ofis
longer,
butthe
because
CSrate
The
value
of
this
parameter
decrease
rate
of
uplink
and
the
smaller
number
of
to
consider
the
times
of
UE
receiving
RRC
the
RRC
connection
release.
service
is
very
sensitive
for
smaller,
itreconfiguration
will beand
easier
toby
downlink
RRC
CONNECTION
SETUP
reconfiguration
user's
CONNECTION
RELEASE
time
delay,
itcan
can't
guarantee
trigger
HS/D
or
HS/E->D/D
one
step,
it
reduce
the
message
isofand
the
lower the
experiences.
can
be decreased.
the
quality
CSvolume
service.
based
traffic
times
ofon
reconfiguration.
system
cost
is,
However,
The
value
of
this
parameter
If
the
number
of
the
RNC Theis
If
the value of Rule:
this
parameter
measurement
after
HS/D
or
Configuration
It needs
probability
of
UE
receiving
larger,
it
will
be
easier
tothe
resent
the
RRC
is
too
small,the
thetimes
time
of
HS/E->D/D,
but
it
also
will
be
to
consider
of
RRC
CONNECTION
SETUP
trigger
uplink
and
downlink
CONNECTION
RELEASE
maximum
buffering
of
the
easier
to
result
in
ping-pong
reconfiguration
and
utilization
and
the
rate
of
setting
the
reconfiguration
by
one
step,
message
is equal
to NreTran
voice
frames
in PDCP
is
adjustmen;
And
the receive
ratioreduce
of
radio
resource.
RRC
CONNECTION
and
the
times
of
the
RNC
doesn't
shorter.
reconfiguration
increase
The
value
of can
thiswill
parameter
is
successfully
be
reconfigurations,
but
the
RRC
CONNECTION
the
risk
of
call
drops.
larger,
it
will
be
easier
to
decreased.
response
toCOMPLETE
user's traffic
RELEASE
Parameter
function:
the until
wait
The
value
of
this
parameter
trigger
and
downlink
need
isuplink
also
slower,
so itthe
willis
waiting
for
500ms,
and
time
for
RADIO
BEARER
larger,
it
will
be
more
difficult
reconfiguration
by
one
step,
be
more
difficult
to
trigger
RNC consider the RRC rate
RECONFIGURATION
to
trigger
HS/D
and
reduce
the
times
of
increase,
and
it or
willHS/E->D/D
influence
CONNECTION
has
released.
COMPLETE
when
based
on
traffic
volume
reconfigurations,
but the
the user's experiences.
CELL_DCH
to CELL_FACH.
measurement,
and
influence
response
user's
traffic
The valueto
of
this
parameter
Parameter
controlling
factor:is
user
experiences.
need
is
also
slower,
so difficult
it will
smaller,
it will be
more
the
round-trip
time
delay
be
more
difficult
to
trigger
rate
to
trigger
uplink
and
downlink
between
UE
and
UTRAN,
the
The
function
ofitthe
parameter
decrease,
and
will
influence
reconfiguration
by
one
step,
success
rate
of
the
RRC
is
toutilization
get configuration
the
of radio of
and
thetransferring.
response
status
sending
IUPS datatoinuser's
order
resources.
traffic
needvalue
is also
faster,the
so it
The
larger
means
from
CN
The
value
oftrigger
this
parameter
is
is
easier
to
rate
longer
waiting
time
and
the
The
parameter
ismore
configured
smaller,
it
will
be
difficult
increase,
the user's
higher
success
rate
the
to
be
consistent
withof
CN
to
trigger
uplink
and
downlink
experiences
is
good.
RRC
status
transferring,
but it
configuration
of by
sending
IUPS
reconfiguration
onetime
step,
may cause the longer
data
and the response to user's
delay.
If
the value
the parameter
traffic
need of
isvalue
also
faster, so
it
The
smaller
means
is
up
to
cn,
RNC
will
followthe
is
easier
to
trigger
rate
shorter
waiting time
and data
the
CN's
indication
of IUPS
decrease,
the
utilization
of
shorter
time
delay,
but
it
may
when
this
parameter
is
in
order
radio
resource
is high.
cause
lowerof
configured,
itsuccess
needs
torate of
If the value
the parameter
thenot
RRC
status
transferring.
consider
if RNC
RNC
require
is
up that
to
cn,
will
ue
to report
theIUPS
location
decide
to send
data in
measurement
result when the
order by OMCR's
UE
has radio link in DRNC.
configuration

resource.
The default value is 2,
considering all factors: The
probability of UE receiving
RRC CONNECTION SETUP;
the number of RRC
CONNECTION
SETUP
The default value
is 700ms,
message;
system
cost. The
considering all factors:
the number of RRC
CONNECTION SETUP
message;
cost.
The defaultsystem
value is
comprehensively set by the
success rate and time delay
of the RRC connection
The
default value is
release.
RRC CONNECTION
RELEASE; the number of
RRC CONNECTION
Because
service
is
RELEASECS12.2K
message;
system
generally
sended with the
cost.
period 20ms, and 3 data
packages are allowed to
send by one time, so the
parameter's value is set to
"60ms".
The reason of the
to consider the user
experiences and the risk of
call drops.
The reason of the
to consider the times of
reconfiguration and user's
experiences.
The reason of the
to consider the times of
reconfiguration and utilization
ratio
of radiovalue
resource.
The default
is
round-trip time delay
between UE and UTRAN,
and the success rate and
time delay of the status
transferring.
At next usage
Immediately
Immediately
At Commit
apply when RNC

send RRC
CONNECTION
RELEASE
At next use
At next use
At next use
At next use
At Commit/New
users
Packets of IU service are

defined by CN is preferred.
New Session
This function is decided by

Users.
Immediately
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Function: This parameter

indicates if RNC supports
MBMS Multicast Mode.
Configuration: If RNC
supports MBMS Multicast
function, the value should be
Function
of this parameter: it
set to "Support"
indicates if RNC supports
MBMS Enhanced Broadcast
Mode.
Function:
Thisis parameter
If the MBMS
not used, this
indicates
RNC
parameterwhether
is invalid
supports MBMS UE
registration over Iur function.
Configuration Rule: If RNC
supports MBMS UE
Function:
This
parameter
is
registration
over
Iur function,
used
to
indicate
whether
the value should be set to
MBMS
service of 8 kbps is
"Support"
supported or not
Configuration Rule: It should
be set according
to the is
Function:
This parameter
provided
MBMS whether
service data
used to indicate
rate
MBMS service of 16 kbps is
supported or not
be set according
to the is
Function:
This parameter
provided
MBMS whether
service data
used to indicate
rate
supported or not
be set according
to the is
Function:
This parameter
provided
MBMS whether
service data
used to indicate
rate
supported or not
be set according
to the is
Function:
This parameter
provided
MBMS whether
service data
used to indicate
rate
supported or not
be set according
to the is
Function:
This parameter
provided
MBMS whether
service data
used
to
indicate
Function:
This parameter
rate
MBMS
service
of 256
kbps is
indicates
the Cpich
Ec/N0
supported
or
not
minimum threshold for intra
Configuration
Rule: ItIfshould
frequency handover.
be set according
to the
reported
Cpich EcNo
is less
provided
MBMS serviceordata
than
IntraHoEcNoThrd
Function:
This parameter
rate
Cpich
RSCP
less RSCP
than
indicates
the is
Cpich
IntraHoRscpThrd,
intra
minimum threshold for intra
frequency
frequency handover
handover. will
If not
be triggered.
reported
Cpich EcNo is less
Parameter
controlling factor:
than IntraHoEcNoThrd
or
user
experience
andthan
network
Cpich RSCP is less
feature
IntraHoRscpThrd,
intra
Parameter
function:
the timer
If
this parameter
is small
, UE
frequency
handover
will not
for
CN
Restore.
will
handover
more
easily
and
be triggered.
Parameter
factor:
may cause controlling
the calldrop.
Parameter
controlling
factor:
IU port interfacing parameter.
user
experience
and network
The larger
parameter
value
feature
means the longer responsive
If
thiswhen
parameter
time
CN is is small , UE
will
handover
unaccessible. more easily and
may smaller
cause the
calldrop.value
The
parameter
means the shorter responsive
time when CN is
unaccessible.
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Immediately
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect for the

next MBMS
service
N/A
Take effect for the

next MBMS
service
N/A
Take effect for the

next MBMS
service
N/A
Take effect for the

next MBMS
service
N/A
Take effect for the

next MBMS
service
N/A
Take effect for the

next MBMS
service
This default value be set

according to network
Immediately
planning and user experience

Immediately
The default value

corresponds with the ZTECN default value
At next use (i.e.,

shall not affect
ongoing
connections)
Yes
No
No
No
No
No
No
No
No
NO
No
Yes
acceptable arrival time of a

FACH DATA FP in a NodeB.
The parameter of TOAWS is
faculty
of processing
FACH
The function
of the parameter
FPs
in
a
RNC.
is
to controlfunction:
the
latestRNC
The
parameter
Parameter
The protocol
parameter
of jitter
is
acceptable
arrival
of a
TOAWS
is
configured
level switchaccording
of Celltime
Broadcast
configured
to the
PCH
DATA
FP
in
a
NodeB.
according
to thejitter
OMCR
Service
function
transport
delay
from a
The
parameter
is configured
parameters
of
TOAWS
and
Parameter
controlling
factor:
RNC
to
a
related
NodeB.
according
toturns
the Transmission
jitter.
The
function
of
the
the
function
on
or
off.
If
thetolerance
value of the
jitter
timeparameter
errors is
protocolparameter
TOAWS
is
tooRNC
small,
can not
from
toNodeB
aearliest
related
to
control the
response
a Timing
NodeB.
acceptable
arrival
time
of ato
Adjustment
Control
Frame
If
the value
of
theinparameter
FACH
DATA
FP
a
NodeB.
RNC
in
time NodeB
, the probability
is
tooparameter
small,
can notis
The
ofcan
TOAWS
that
a
PCH
data
not be
response
a
Timing
configured
according
to thebe
The
function
of
the
parameter
sent
on
uu
interface
would
Adjustment
Control Frame
to
faculty
of
processing
FACH
is
to
control
the
latest
increased
and
theprobability
quality of
RNCininatime
, the
FPs
RNC.
acceptable
time
ofbe
a
service
witharrival
PCHcan
channel
that
aparameter
PCH
data
not
The
ofintype1
jitter
iswould
FACH
DATA
FP
a
NodeB.
such
as
a
paging
sent
on uu according
interface would
configured
to thebe
The
parameter
is configured
be
dropped.
increased
and
the
quality
of
transport
delay
jitter
from a
according
toof
the
Transmission
If
the value
the
parameter
service
with
PCH
channel
RNC
to
a related
NodeB.
jitter
time
errors
is
tootolerance
large,
The
NodeB
such
as
a paging
type1
would
If
the
value
of
the
parameter
from
RNC
to
a
related
would
store
more
PCH
DATA
betoo
dropped.
is
small,
the
probability
NodeB.
FPs
theofdelay
of service
If
theaand
value
the parameter
that
FACH
DATA
FP may
be
If
the
value
of
the
parameter
with
PCH
channel
such
Function:
Inactivity
Timeas
of a
is
too large,
The
NodeB
received
out
of
the
arrival
is
too small,
NodeB
canDATA
not
paging
type1
would
be
E_FACH
would
store
more
PCH
window
inTransmission.
aTiming
NodeB
would
be
response
a
increased
more.
Configuration
Rule:
needs
FPs
and the
delay
ofIt service
increased
and
the
quality
of
Adjustment
Control
Frame
to
The
protocol
parameter
to
consider
the
transmission
with
PCH
channel
such
as a
service
with
FACH
channel
RNC
in type1
time
,UE
theLength
probability
TOAWS
isCycle
configured
Function:
of
bandwidth
of
battery
paging
would
be
would
be dropped.
that
a FACH
DATA
FPuser
can
not
according
to
adjusting
the
Discontinue
Receiving
of HSconsumption
and
the
increased
more.
If
the
value
of
the
parameter
be
sent
on
uu
interface
would
value
of
the
parameter
of
jitter
DSCH.
experience.
The
parameter
can
not be
is
too
large,
The
NodeB
be
increased
and
the
quality
because
the
RNC's
process
Configuration
Rule:
It
needs
The
value
of
this
parameter
configured
too
small.
Function:
Cycle
Length
of is
would
store
more
FACH
of
service
with
FACH
channel
faculty
is
more
steady.
to
consider
UE
battery
larger,
the
more
difficult
toof
Discontinue
Receiving
of
HSDATA
FPs
and
thethe
delay
would
be dropped.
consumption
and
user
enter
DRX
state,
and
the
DSCH.
service
with
FACH
channel
If
the value
ofconsumption
the parameter
experience.
more
battery
for
Configuration
Rule:
It
needs
would
be increased
more.
is
too
large,
The
NodeB
The
value
of
this
parameter
is
UE.
to
consider
UE
battery
The
protocol
parameter
would
store
more
FACH
larger,
the
cycle
length
of
The
valueisof
this
consumption
andparameter
the user is
TOAWS
configured
DATA
FPs
and
the to
delay
of
discontinue
receiving
of HSsmaller,
the
easier
enter
experience.
according
to FACH
adjusting
the
service
with
channel
DSCH
is
longer,
and
it
can
DRX
state,
and
it
can
save
The
value
ofparameter
this parameter
is
value
of
the
of jitter
would
be
increased
more.
save
battery
consumption,
but
the
battery
consumption,
but
larger,
thethe
number
ofprocess
frames
because
RNC's
The
parameter
can
itit may
influence
the not
user
also
may
influence
thebe
user
using
for
Detection
faculty
is HS-DSCH
more
steady.
configured
too
small.
experience.
experience.
in
the Cycle Length of
The
value ofreceiving
this parameter
discontinue
of HS- is
smaller,
the
cycle
length
of
DSCH is more, and the user
discontinue
receiving
of
HSexperience
is better,of
but
the
Function:
Indication
UE
Main
function:
This
parameter
DSCH
is shorter,
and
the
user
moreEnhanced
battery
consumption
for
with
DRX.
indicates
theistime
delay
experience
better,
but of
theIU
UE;
Configuration
Rule:
The
Release
Resource.
more
battery
consumption
for
The
value
of this
parameter
recommended
value
is 1, gap
it is
Influence
factor:
the
time
UE.
smaller,
theallnumber
of frames
can
make
ue in receives
enhanced
between
the
RNC
Function:
This
parameter
using
for
HS-DSCH
Detection
cell_FACH
state use DRXis
DIRECT
TRANSFER
used
for
the
difficult of
reception
in
the
Cycle
Length
and save battery
message
from
CN
and
IU
of
UE
in
the
connection
discontinue receiving
consumption,
when of HSRELEASE
COMMAND.
moden
is aand
constant
DSCH
isand
less,
it can save
Enhanced
DRX
used.
The
smaller
the is
parameter
required
in monitoring
theit is,
battery
consumption,
but
the
faster
the
RNC
release
IU
PICH
cycle. The
may influence
thedifficult
user
resource,
which
may
cause
Function:
Inter-Frequency
reception
cycle is 2^k frames.
experience.
thethe
Location
Area
Update
Balance
Switch
Based
onk is
In
connection
mode,
procedure
failed
in the
UE,
Measurement
the minimum
value
among
and
alsofactor:
may cause
the RNC
Related
coverage
of
the DRX
cycle
length
can't
paging
the
UE.
neighboring
cell
coefficient of the attached
The
the
parameter
is,
If
thisbigger
switch
isUTRAN
on,
domains,
and
DRX
the
slower
the
RNC
release
neighboring
cells
with
IU resource,
"neighbor"
orwhich
"contained
Configuration
Rule:may in"
decrease
themeasurementutilization
relation
use
Considering
UE's
pagingratio
of
IU
resource.
based
balance;
neighboring
occasion and power
cells
with "Overlap"
consumption
of UE. or
"Covers"
relation
alsothe
The smaller valuemay
means
use
measurement-based
more UE paging occasion,
balance
if will be
but moreonly
power
CoverMeaBalSwch
on too.
consumed. And the is
vice
If
the switch is off, only blind
versa.
handover-based balance will
be performed to the
neighboring cells with
N/A
At Commit
according to the faculty of

processing FACH DATA FPs
in a RNC.
Immediately

processing PCH DATA FPs in Immediately
a related NodeB.

in a RNC.
Immediately

in a related NodeB.
Immediately
The reason of the

to consider UE battery
consumption and the user
experience.
The reason of the
experience.
The reason of the
experience.
The reason of the
consumption in E-FACH
state.
Immediately
Immediately
Immediately
Immediately
The default value is300ms,

and is get by test result of
outfields.
At next use (i.e.,

shall not affect
ongoing
connections)
Considering UE's paging

occasion and power
consumption of UE.
At next use (i.e.,

shall not affect
ongoing
connections)
The coverage of neighboring

cell is considered to define
At Next Use
this default value.
Yes
No
No
No
No
No
No
No
No
Yes
No
NO
Related factor: success rate

Parameter
indicates
of blind HOfunction:
based balance
the
time
threshold
that
If RabMeaBalStaSwch the
and
RNC
may resend the
CoverMeaBalSwch
are on,
MEASUREMENT
CONTROL
measurement-based
balance
RELEASE.
will
be
performed
for
Function:
Timer
of Deactivate
Parameter
controlling
factor:
neighboring
cells
with
Compressed
Mode
for
the
round
trip
time
between
overlapping
or covering
Balance
Strategy
Based On
UE
and UTRAN,
the
relation;
otherwise,
blind HO
Measurement
MEASUREMENT
based balance
willCONTROL
be
Related
factor:
the
time
of in
FAILURE
message
number
performed
formode
neighboring
compressed
active
and
Uu
interface.
cells
with overlapping or
UE
measurement
The
smaller
parameter value
covering
relation.
This
parameter
is smaller,
the
means
the
shorter
time
delay
Measurement-based
balance
activation
time
of
compressed
for
RNC
resending
can
improve
the and
successful
mode
is shorter
UE may
measurement
control
ratefinish
of balance
for UErelease,
on
not
measurement.
itcell's
helps
to
let
UE
receive
boundary,
but the
Otherwise,
this
parameter
is
measurement
control release
procedure
is
more
bigger,
the
activation
time
of
message
sooner
and release
complicated
and
delay
is
compressed
mode
is This
longer
Parameter
Function:
specified
measurement
longer
than
that
of
blind
HO
but
which
parameter
indicates
the valid
sooner,
butimpact
it maycell
increase
based
balance.
throughput.
UE
version
for heart beat.
the
MEASUREMENT
Configuration
Rule: It is
CONTROL FAILURE
mainly
used
for signalling
message
number
in Uu
storm
scene,
indicates
the
interface.
Parameter
Function:
This
valid
UE
version
for
heart
value
parameter
indicates the
valid
beat.When
the heart
signalling
load
means
the longer
time
delay
UE
version
for
beat.
is
not
high,
it's
not
for
RNC
resending
Configuration Rule: It is
recommended
tosignalling
perform
measurement
release,
mainly used forcontrol
heart
beat
detection
to the
UE.
itParameter
helps
to decrease
the
storm
scene,
indicates
Function: This
MEASUREMENT
CONTROL
valid
UE version
for
heart
parameter
indicates
the valid
FAILURE
message
number
in
beat.When
the
signalling
UE version for heart beat.load
Uu
interface,
but
it
may
let
UE
is
not
high,
it's
not
receive
measurement
control
recommended
perform
mainly used
fortosignalling
release
message
too
late
heart
beat
detection
to
UE.and
storm
scene,
indicates
the
Parameter
Function:
This
release
specified
valid
UE version
for heart
parameter
indicates
the valid
measurement
too
late.
beat.When
the
signalling
is
not high, it'sRule:
not It is
Configuration
recommended
perform
mainly used fortosignalling
heart
beat
detection
to the
UE.
storm
scene,
indicates
valid
UE version
for heart
parameter
indicates
the valid
beat.When
the
signalling
is
not high, it'sRule:
not It is
Configuration
Function:
HearttoBeat
Period.
recommended
perform
mainly used for
signalling
Configuration
Rule:
Tests
heart
beat
detection
to
UE.
storm
scene,
indicates
the
confirm
that UE
will send
valid
versionwhen
for heart
SCRIUE
message
it have
beat.When
the
signalling
load
no PS data transmission for
4
is
not
high,
it's
not
Function:
The
Switch
or 5 seconds, so the value of
recommended
to perform
Indicates
whether
Onlybe
Judge
this parameter
should
less
heart
detection
to UE.
the
Traffic
on
Heart
thanDownlink
4beat
seconds,
to avoid
UE
Beat
for SCRI
Channel
Switching
sending
message
andto
PCH/IDLE.
releasing network connection.
Configuration
But if its valueRule:
is tooTests
small, it
confirm
that
UE
doesn't
send
Main
function:
This
parameter
will make the heart
beat
date
uplink
data
it
indicates
thepackages
time
of Waiting
too frequent,
and it's
aafter
waste
receives
theLINK
heart
beat data,
for
RADIO
RESTORE
of resources.
and the channel switching to
INDICATION..
PCH
or Idle
statecost
based
onof
Influence
factor:
time
the
downlink
and
uplink
traffic
obtaining physical layer
volume
measurement
can be
synchronization,
of
This parameter
isthe
notfeeling
used
in
normally
performed,
so
the
user,
wait
time
to
Recurrent SW version
parameter OnlyDnOnHB
establishment
the service.can
be set
to "0: the
Off'.parameter is,
The
smaller
the probability of
synchronization failure and
the probability of call drop
may be increased.
The bigger the parameter is,
the probability of
synchronization success may
be increased; However, when
the radio environment is bad,
the RNC may waist too long
time to unnecessary wait and
The success rate of blind HO

based balance is considered At Next Use
to define this default value.
The time of compressed
mode active and UE
measurement is considered
The default value is
round trip time between UE
and UTRAN, the
MEASUREMENT CONTROL
FAILURE message number
in Uu interface.
it's not recommended to
perform heart beat detection
to UE.
At Next Use
At Commit/New
users
At Next Use

perform heart beat detection At Next Use
to UE.

to UE.

to UE.

to UE.
The default value is to try to
prolong the heart beat period
At Next Use
Tests
on theconfirm
premisethat
thatUE
UEdoesn't
send
uplink
packages
doesn't
senddata
SCRI.
after it receives the heart
beat data, and the channel
switching to PCH or Idle state
based on the downlink and
At Next Use
uplink traffic volume
measurement can be
normally performed, so the
parameter OnlyDnOnHB is
set
N/Ato "0: Off'.
New connection
The default value is 3s,
considering all factors: cost
time of obtaining physical
layer synchronization, the
feeling of user, wait time to
Re-establishment the
service.
Immediately
NO
NO
NO
NO
NO
No
No
No
No
No
Yes
Yes
indicates the waiting time for

obtainingSET
physical
layer OutACTIVE
UPDATE
Main
function:
This parameter
of-Sync,
the feeling
of user,
COMPLETE.
indicates
theRe-establishment
time of the RNC
wait
time
to
Influence
waiting
forfactor:
RB cost time of
the
service.
obtaining
physical
layer
Setup/Reconfiguration/Releas
The
smaller the parameter
is,
synchronization
B,
the feeling
e
Response
over
Uu
the
probability
of
receiving
the
of user, wait time to ReInterface.
CELL UPDATEthe
may
be
establishment
call.
Influence
factor:
cost
time of
decreased,
and
the
The
smaller
the
parameter
is,
transmission
the
RB
probability
of call
drop maythe
be
the
probability
of
receiving
increased.
ACTIVE
SET
e
message
to UPDATE
UE,
handlingis,
Main
function:
This
The
bigger
the
parameter
COMPLETE
may
beparameter
time
of
UE,
the
feeling
of for
indicates
the
waiting
time
the
probability
receiving
the
decreases,
andof
the
probability
user,
wait
time
to
ReRRC
CONNECTION
SETUP
CELL
UPDATE
may
be
of
call
drop
may
be
establishment
the call.
COMPLETE.
increased;
However,
when
increased.
The
smaller
the
parameter
is,
Influence
factor:
The
the
radio
environment
is bad,
The
bigger the of
parameter
is,
the
probability
receiving
the
probability
of UE
the
RNC
may
waist
too longthe
the
probability
of receiving
receiving
RB
RRC
CONNECTION
SETUP;
time
to
unnecessary
wait
and
ACTIVE
SET UPDATE
handling
time
of
UE,
the
increase
the
wait
time
to
ReCOMPLETE
may be
be
e
Response
may
feeling
of user.
establishment
the service,
increased;
However,
when
decreases,
and
the
probability
The
smaller
the
and
influence
theparameter
feeling
of is,
the
radio
environment
is bad,
of
call
drop may
be
the
probability
of
receiving
user.
the
RNC may waist too longthe
increased.
RRC
CONNECTION
SETUP
time
to
unnecessary
wait
and
The
bigger
the be
parameter
is,
response
may
decreases,
increase
the
wait
time
to
Rethe probability
of
receiving
the
and
the
rate
of
setting
RRC
Main
function: the
Thisservice,
parameter
establishment
RB
CONNECTION
failure
may
indicates
whether
apply fast
and
influence
the feeling
of be
increased.
reconfiguration
function
user.
e
Response
may
be the when
The
bigger function:
the
parameter
is,
Parameter
HS
service
cell
was
changed.
increased;
However,
when the
the
probability
of
receiving
maximum
time
for
waiting
Influence
factor: the capability
the
radio
environment
is bad,
RRC
CONNECTION
SETUP
SRNS
CONTEXT
REQUEST
of
NODEB.
the
RNC
may
waist
too
long
Response
may
be
increased;
at
theparameter
source RNC
during
The
is set
to 'On'
time
to
unnecessary
wait
andif
However,
when
the radio
relocation
offunction:
SRNS.
the
NODEB
support
changing
Parameter
the
increase
thecontrolling
wait
time
to Reenvironment
is bad,
the
Parameter
factor:
serving
HS-DSCH
RL
byRNC
fast
maximum
time
for service,
waiting
establishment
the
may
waist
tooFORWARD
long
time to
IU
port
interfacing
parameter.
reconfiguration;
otherwise,
SRNS
DATA
and
influence
the feeling
of
unnecessary
and
The
larger parameter
the
parameter
is
set
tovalue
'Off'.
COMMAND
atwait
the
source
user.
increase
the
time
to
re-enter
means
the longer
resource
RNC during
relocation
of
the
network,inand
suspension
theinfluence
SRNC.
SRNS.
the
feeling
the user.factor:
The
smallerof
parameter
value
Parameter
controlling
Parameter
function:
the
means
the
shorter
resource
IU
port interfacing
parameter.
maximum
time
for SRNC.But
waiting IU
suspension
in the
The
larger
parameter
value
RELEASE
COMMAND
the
ifmeans
the parameter
value
isattoo
the
longer
resource
source
RNC
during
relocation
small,
the CN
not finish
suspension
in may
the SRNC.
of
SRNS.
SRNS
CONTEXT
REQUEST.
The
smaller
parameter
value
Parameter controlling factor:
means
the
shorter
resource
suspension
in the SRNC.But
value
ifmeans
the parameter
is too
the longervalue
resource
small,
the
CN
may
not
finish
suspension
in the
SRNC.
function
of this
parameter:
SRNS
DATA
FORWARD
The
smaller
parameter
Configure
NRI Bit
lengthvalue
of
Function:
GBR
of AMR
COMMAND.
means
the
shorter
CS/PS Node
Service
Whether toresource
be
suspension
in the SRNC.But
Factors of Indicator.
consideration:
this
Reserved
ifConfiguration
the
parameter
value
parameter need
to be is too
Rule:
small,
CN
finish
negotiated
withmay
CN,not
and
To
turnthe
on
function,
inonly
Iu
function
of the
this
parameter:
relocation.
configured
when
NE
type
UP
V1, when
Configure
NRIthe
BitCN
length ofis
MSCSERVER/SGSN.
assignment
PS Node GBR is not
matching
the AMR rate
Factors ofwith
consideration:
this
configured
by
RNC
, the CN
parameter need to be
assignment
GBR
of AMR
negotiated with
CN,
and only
service
is forcibly
reserved,
configured
when NE
type is
and
it can make the AMR
SGSN.
This
configured
according
trafficisre-access
with
GBR
operator's
requirement.
when it is rejected
with RNC
Location
Mode needn't add
MaxBR rate.
SAS
butoffit will
To turn
the increase
function, RNC
when
CPU
load
by
location
the CN assignment GBR is
service.SAS
Mode
not matchingLocation
with the AMR
will
IUPC interface
rateadd
configured
by RNC , the
between
RNC and
SAS
which
CN assignment
GBR
of AMR
will
increase
service
is notmessage
forcibly volume
on
IUPC.In SAS Location
reserved.
Mode,
positionset
method
It is generally
to "off"and
only
position
calculation
is inRNC
SAS,
when other company's
which
RNC
acrossalso
IURdecrease
doesn't support
CPU
load.
the CN
assignment GBR.

layer Out-of-Sync, the feeling
of user, wait time to ReThe
default value
10s,
establishment
the is
service.
layer synchronization B, the
The
default value is
Re-establishment
the5s,
call.
time of transmission the RB
se message to UE, handling
time of UE, the feeling of
user,
wait time
to ReThe default
value
is 5s,
establishment
the
call. The
considering all factors:
handling time of UE, the
feeling of user.
Immediately
Immediately
Immediately
Immediately
The default value is off.

Almost NODEB doesn't
support the function.
Immediately
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
no IuFlex is used by default,

and this parameter need to
be negotiated with CN
New users

New users
The reason that the
parameter's default value of
the parameter is on is
because it is generally set to
Immediately
"off" only when other
company's RNC across IUR
doesn't support the CN
assignment
GBR.
Choosing RNC
location
mode, RNC will support
At next use
location service when RNC is
not configured SAS device.
No
No
No
No
No
No
No
No
No
No

indicates the QChat is
supported or not
Related Factor: function
switch, if RNC need support
Qchat function, set the
Parameter
function:
RNC 0
parameter as
1. otherwise
level switch of fast return to
E-UTRAN function
the function turns on or off.
parameter is the switch of
testing and demo
function of this parameter:
Parameter
Function:
This
This
parameter
indicates
parameter
is Cell
to dojudgment
testing and
which target
demo
strategy adopt for
access/handover algorithm in
shared
network..
Function:
This
parameter
Function:
UE's
Device Type
Factors ofwhether
consideration:
indicates
support
Condition
Whether
to be
Network
Planning
and
HCS
or
not
in
Cell
Judged
Indicator
When
Heart
complication
of configuration.
Reselection
and
in Handover.
Beat
Detection
If
judgmentcontrolling
based on factor:
Parameter
Configuration
Rule: For "Preauthorization
information
in
the
speed
of UE
and
R7
Fast
Dormancy
Parameter
function:
network
shared
network,
this
handover in time/reselection
Suppressing"
in pre-version,
Planning&Optimization
parameter
set
0, otherwise
in
timejudgeisthe
when
conditions
parameter.
the
CPU
overload
1.
When
cell
reselection
and
should
be of
satisfied
forfunction.
UE
threshold
the
CDT
handover
,
if
this
parameter
is
which
is
performed
heart
beat
Parameter
controlling
factor:
open
,
UE
in
high
speed
will
detection,
it isperformance,
to identify the
RNC
system
handover/reselect
tothe
cell
datadata
cards
based
on
the with
Parameter
function:
the
size
of
the
CDT.
low
priority
to
ensure
reported
IE
"Device
type"
SRNC
waiting
time forvalue
the,
The
larger
parameter
continuance
of services
and
This
parameter
indicates
but
some
mobile-phone
also
RECONFIGURATION
means
the higher CPU
handover/reselect
in
time.
when
RRC
on
HS
channel
report
the
IE
to
UTRAN,
so it
COMPLETE
message
from
overload threshold, the later
whether
it
is
also
allowed
may
lead
to
the
scene"
the
the
UE
when
the
UE
leaving
the RNC stopping sendingtoout
setup
onFACH
DC. When
itbe
islarger
mobile-phone
should
PCH
or
state
and
the CDT
data,
and the
"Yes",
if
secondary
carrier
performed
heart
beat
entering
the data CELL_DCH
size, but the state.of
DC
has
already
been
detection
, but
not,system
Parameter
controlling
factor:
influence to
theit's
RNC
selected
during
RRC
because
the
mobile-phone
channel
transferring
performance is moresuccess
heavily.
procedure,
there
is notype"
report
thetime
IE"
Device
to
ratio
and
delay.
The smaller
parameter
value
selection
of
secondary
carrier
UTRAN"
.So
this
parameter
is
The
larger
parameter
value
means the lower CPU
change
during
RAB
added. the
The
recommended
means
longer
waiting
overload
threshold
and the
assignment
procedure.
When
value
0, not
judge
this
IE
time,
can
increase
thedata
lighteritisinfluence
of the
itcondition.
is
"No",
there
is
no
channel
transferring
success
acquisition
of the CDT
secondary
carrier
selection
ratio,
buttomay
the
function
the increase
RNC
system
during
RRC
procedure,
transferring
procedure
time
performance, but the RNC
secondary
carrier will
delay.
thus stops sending
outbethe
selected
RABthe value
The
parameter
CDTsmaller
dataduring
later
and
data
assignment
procedure.
means
the shorter
waiting
size is smaller.
Rule:
it is quicken
expectedheto have
time, itIf can
secondary
during
RRC
transferringcarrier
procedure
time
procedure,
this decrease
parameterthe
is
delay, but may
set
as "Yes".
However,
in this
channel
transferring
success
case,
ratio. the chance of DB is
selected as secondary carrier
is decreased. If it is expected
that DC and DB have this
same chance to be
secondary carrier, this
parameter is set as "No". In
this case, secondary carrier is
selected during RAB
assignment procedure.
no need to support
New User
The new function is closed by

New connection
default

Immediately
default

Immediately
default

planning

planning
andofuser
The reason
the experience
to avoid the scene" the
mobile-phone should be
performed heart beat
detection , but it's not,
because the mobile-phone
report the IE" Device type" to
The
default
UTRAN
" .. value is
RNC system performance
and the data size of the CDT.
channel switching success
ratio and time delay.
At Next Use
At Next Use
At next use
At Commit/New
users
At Commit/New
users
Secondary carrier is try to be

selected during RRC
Immediately
procedure.
Yes
No
No
No
No
No
No
No
No
CONTROL REQUEST
information in Iur Interface to
control power balancing.
Configuration Rule: The value
of this parameter should
consider the radio link quality
of the service in DRNC.
When the switch is on, DRNC
send the DL POWER
CONTROL
REQUEST
Parameter Function:
This
information
to Node B
parameter indicates
thewhich
offset
is
with
the DL
POWER
of same
CPICH
Ec/No
in Iur
CONTROL
REQUEST
interface relative
to the
information
send
CPICH
Ec/No
of by SRNC
through
Iur interface.
measurement
result. The
When
the
switch
is off,
DRNC
CPICH Ec/No
in Iur
interface
would
discard
the
DL
is calculated by the CPICH
POWER
Ec/No of CONTROL
UE measurement
REQUEST
result minusinformation
this offset. send
by SRNC through
Configuration
Rule:IurThe value
interface.
If
the quality
the link
radio
link
consider
the of
radio
quality
in
DRNC
is
bad
for
using
theit
of the service in DRNC, and
downlink
power
balancing
also needs to avoid the power
parameters
from SRNC, even
wasting.
make
call drop rate
rise,small,
then
If this parameter
is too
this
switch
can
be
turned
off,
the initial power of the radio
and
using
the
downlink
power
link in DRNC will be too big, it
balancing
parameters
Function:
of from
is a powerSwitch
wasting.
DRNC.
URA_PCH
for UEisoftoo
Release
If this parameter
big,
99
Release
4 the radio
theand
initial
power of
Function:
Thiswill
parameter
Test
that
some
link inconfirms
DRNC
be
small, it
indicates
the
detection
Release
99 UE
might affect
the have
serviceperiod
which
by user
plane
compatible
problem
with
PCH
quality.is used
for
application
service
state,
so theSuggestion:
recommended
Adjustment
If
detection.
value
is "not
allowed",
and is
there are
some
problems,
The
factor:
The
Parameter
Thisare
switched
toFunction:
idle
suchrelated
as call
drop, which
fluctuation
of initial
dataswitch
stream,
parameter
is
the
because the
powerofof
how
important
to
report
response
theDRNC
ENB UTRA
SI
radio link in
is toothe
application
service
type in
Function:
This
parameter
request
small, then this parameter
time.
indicates
the minimum
can be configured
with time
a
The
larger
the
parameter,
that
the
user
plane
reportsthe
bigger value.
smaller
the influence
the to
the application
serviceoftype
fluctuation
of data
But
control
plane
againstream.
after last
in this case, the result may
report.
not be
reported
in time
The
related
factor:
The and
Function:
This
parameter
the DPI handle
in RNC may
efficiency
of application
indicates
theso
total
datato
be
delayed
leading
service
type
detection,
thebad
number
should
be
reached
user
experience.
time that the data stream to
during
oneafter
application
service
Thestable
smaller
thethe
parameter
is,
be
RRM
QoS
detection
the easierperiod.
the
result isby the
adjustment
triggered
Related
Factor:
influenced
by the fluctuation
change
of
application
service
of data stream. But in this
type.
case,
the result
could be is,
The larger
the parameter
reported
in
time
and good
the application service
type
Function
of reported
this parameter:
user not
experience
is achieved.
may
be
in time.
This
parameter
that
But on
the otherindicate
hand, the
RNC
supporthas
themore
user-defined
data stream
time to
PLMN
selection
not in case
be stable,
so theor
detection
of
GWCN
result is more efficient.
Factors
of consideration:
if is,
The smaller
the parameter
Function
ofsupport
thisservice
parameter:
RNC
need
this type
the application
This
parameter
function,
set
theindicates
value
as that
1,
detection
is more
frequently.
the
RNC
can
Broadcast
otherwise
0
The detection result can the
be
Multiple
MIB
not
reportedPLMNs
in time. in
But
theordata
Factors
of
consideration:
if
stream may have no enough
RNC
need
supportthe
this
time to
be stable,
function,
set
the
value
efficiency of result mayas
be1,
otherwise
0
influenced.
Downlink power balancing

New radio link in
parameter is get from SRNC
DRNC.
according to 3Gpp.
Usually, this default value

satisfy the requirement of
DRNC radio link quality and
avoid power wasting.
New radio link in

DRNC.
Test confirms that some

Release 99 UE have
compatible problem with
PCH state, so the
recommended value is "not
allowed", and is switched to
idle
At next use

Immediately
default
N/A
At next use
N/A
At next use
The efficiency of application

service type detection and
the time that the data stream
to be stable after the RRM
At next use
QoS adjustment triggered by
the change of application
service type are considered
to configure this parameter.
In Most Case, user-defined is
New User
not needed
RNC support this function in

default
At Commit
NO
No
No
No
No
No
No
Yes
NO
NO
No
Yes
Parameter function: the

switch of whether the RNC
Send RL SETUP and RRC
CONNECTION SETUP in
parallel when setting up RRC
Function
of this parameter:
CONNECTION.
This
parameter
indicates
the
Parameter
controlling
factor:
applied
feature
info
of
Ue
for
the function on or off.
Routing CN
Factors
ofOnly
consideration:
i if
Function:
the CS service
RNC
Select
CN
by
IMSI,
the
number is less than the
value is 1, ifvalue,
RNC the
Select
CNis
parameter
Board
by
IDNNSpower
(Derived
permitted
off.from
IMSI)
, the the
value
is 2; the
The larger
Value,
otherwise
0
easier
theOnly
board
power
off
Function:
the
UE context
and
the
more
the
CS
service
drop.
parameter
value, the Board is
The
smaller
the Value,
permitted
power
off. the
more
difficult
the
board
The larger the Value,
thepower
off
and
the
less
the
CS
easier
theOnly
board
power
off
Function:
the
CS service
service
drop.
and
the
more
the
UE
rrc
connectionvalue,
drop. the Board is
parameter
The
smaller
the Value,
permitted
power
off. the
more
difficult
the
board
The larger the Value,
thepower
off
and
the
less
the
UE
rrc
easier
theOnly
board
power
off
Function:
the
UE context
connection
drop.
and
the
more
the
CS
service
drop.
parameter
value, the Board is
The
smaller
the
Value,
function:
This
parameter
permitted
power
off. the
more
difficult
the
board
indicates
time
that
The largerthe
thedelay
Value,
thepower
off
and
the
less
the
CS
RNC
waits
the
service
easier the board powerauto
off
service
release
before
theUE
board
and the drop.
more the
rrc
power
off.
connection drop.
If
thesmaller
time is the
set Value,
longer,the
UE
The
number
to auto
is
more difficult
therelease
board power
more
and
is rrc
off and
thedrop
lessrate
the UE
lower.But
power off
connectionthe
drop.
procedure is longer.If the
power off is based on
Parameter
function:
RNC
attribution switch,
it will
cause
level
switch
of
Faster
the load of the other L1 DCH
synchronization
function
attribution
boards
heavier.
Specifies the
user
admission
Parameter
controlling
If
the
time
is
set
shorter,
control threshold after factor:
thethe
the
function
turns
on or
off.Ifis
board
poweris
off
procedure
CMP
board
normal
run.
faster,
and thevalue
UE drop
the
threshold
is 0,rate
it
will increase.
means
there is no need to do
user
admission
control.
If the
Specifies
the user
admission
threshold
value
is
greater
control threshold after the
than 0,
it means
the admitted
DMP
board
is normal
run. If
RRC
CONNECTION
the threshold
value is 0, it
REQUEST
per to do
means therenumber
is no need
second
shall
not
be
greater
user admission control.
If the
than
the
threshold
value.
threshold value is greater
than 0, it means the admitted
The
value means the
RRCbigger
CONNECTION
longer
time number
waiting for
REQUEST
perthe
CELL
from
secondUPDATE
shall notmessage
be greater
UE,
the
longer
time
for
the
than the threshold value.
call time delay, and the higher
Function
ofrate
this for
parameter:
successful
the callThis
parameter
indicates
reestablishment.
RNC support Virtual LAC
Paging or not
function switch. If RNC
support, set it as 1.otherwise
0
the function is set to off
Immediately
In Most Case, the function is

New User
not needed
Only when the UE is little the
board is permit power off. So
the CS service number
At next use
threshold is set low and
decrease the impact on call
drop KPI.
Only when the UE is little the
board is permit power off. So
the UE number threshold is At next use
set low and decrease the
impact on call drop KPI.
Consider to decrease the
impact on call drop KPI, the
At next use
CS service number threshold
is set low.
Consider to decrease the
impact on call drop KPI, the
At next use
UE number threshold is set
low.
mostly, the duration time of a
CS service is about 90s.So
RNC consider decrease the
At next use
UE call drop rate as well as
make the board power off
procedure short.
default is off, avoid the
compatible problem
happening with some UE.
Immediately
Based on the ability of V3

hardware
Immediately
Based on the ability of V3

hardware
Immediately

call delay and call reestablishment success ratio.
At Commit/New
users
In Most Case, the function is New Paging From

not needed
CN
No
Yes
Yes
No
Yes
No
No
No
N/A
N/A
power offset for white list

users. When calculate the
initial DL power for the white
list user, this parameter is an
additional
offset
to the
Parameterpower
Function:
This
initial
DL
power
calculating
parameter indicates whether
formula Call
of normal
user.
Forced
Drop will
be
Configuration
It needs
triggered whenRule:
the ordinary
to
whether
the in
white
PSconsider
user number
online
list
user
need
bigger
initial
Parameter
Function:
This
CELL_DCH state is larger
power
than
normalwhen
user.
parameter
indication
if toVIP
than the
threshold
Bigger
this
parameter
notify
neighboring
cells
user exists in the cell. is,the
bigger initial
power
the
existing
of VIP
userof
Configuration
Rule:
ifwhen
the
Parameter
Function:
This
white
list
user.
there's
VIP
user
parameter
is
set exists.
to "On",
parameter
indicates
Smaller
this
parameter
Related
Factor:
The
Forced Call
Drop
willthe
beis ,
Lowest
Priority
of
Neighbor
smaller
initial
power
of
theof
performance
requirement
triggered when the ordinary
Cell
Notified
of
VIP
Existing
white
list
user.
VIP
users
and
the
ordinary
user number online in
when
VIP Exists
users.
CELL_DCH
stateand
is larger
Neighbor
Cell
needwhen
to
beVIP
Configuration
Rule:
if the
than the threshold
notified.Only
the
neighbor
cell
parameter
"On",
the
user exists is
inset
theto
cell;
else,
that
Measurement
Priority
is
neighboring
cells
are
notified
will not be triggered.
equal
or the
higher
this
Parameter
Function:
This
to lower
loadthan
to guarantee
priority
will indicates
be notified.
parameter
the users.
the performance
of VIP
Parameter
Function:
This
Configuration
Rule:
the
additional
size
foris uplink
SIR
if the parameter
set
tolarger
parameter
indicates
whether
of
the
value,
the
more
cell
target
increasing
when
"Off", the neighboring cellswill
the
white
list error
function
isthe
open
be
influenced
when
exists
consecutive
TBVIP
occurs.
have
no need
to lower
or
not.
and
probability
that
Configuration
Rule: It needs
load the
for more
VIP users.
Configuration
it's
theconsider
VIP performance
can
be
to
theRule:
service
quality
feature
switch
and
not of the
guaranteed;
the
smaller
and system
capacity.
adjustable.
if the
function
value,
the less
cell
willThis
be is
If
the parameter
value
is
Parameter
Function:
opened,
the
performance
of
influenced
when
VIP
exists
larger,
the
SIR
target
will
be
parameter indicates the valid
common
users
may
be
worse
and
the
less
probability
that
increased
more
rapidly
when
time window for TB in the
(the
service
online
maybe
the VIP
performance
can
be
consecutive
error TB
occurs.
shield
period.
dropped
and
new
ordinary
guaranteed; it Rule:
Accordingly,
will improve
the
Configuration
It needs
service
maybe
access
failed)
service
quality
affect
the
to
consider
thebut
service
quality
system
capacity.
and system
capacity.
If
the
parameter
If the parameter value
is too is
big,
smaller,
the
SIR
target
willtwo
be
even if the time between
increased
slowlyiswhen
SIR
target more
increasing
too
consecutive
TB occur.
long,
the SIRerror
target
Accordingly,
it will
improve
increasing step
size
in the the
system
capacity
but
affect the
second time will be increased,
service
quality.
it will affect the system
Adjustment
Suggestion:
capacity. This
Function:
parameter
If the
there
is no need
If
parameter
is to
tooincrease
big,
indicates when board
power
the SIR
target
increasing
step
only
when
the
time
between
off, the wait timer for waiting
size
when
consecutive
error
two
SIR
target
increasing
the RRC release or DSCRisby
TB
occurs,
thisSIR
parameter
very
short, the
target
one step.
can
be
set
to
0.
increasing
step
size
the
Configuration Rule: Itinneeds
If
there is
need
to increase
second
time
could
to
consider
the
userbe
the SIR target
increasing
increase,
it will
affect
the step
experiences
and
the time
of
size when
consecutive error
service
quality.
turn off the power.
TB
occurs, this parameter
Adjustment
The value ofSuggestion:
this parameter is
can
be set
to need
0.1dB (or
else
If
there
isthe
no
increase
smaller,
time oftoturn
off
value)
.
the
target
increasing
the SIR
power
is smaller,
and step
the
size when
consecutive
SIR
user
experience
is worse;
target
increasing
occurs, thisis
The value
of this parameter
parameter
can
be
set to
Only
valid
for
UniCom
larger, the time of turn
off0.the
If
there
is
need
to
increase
power is larger, and the user
the
SIR target
increasing step
experience
is better.
size when consecutive SIR
target increasing occurs, this
parameter
canUniCom
be set to 40 (it
Only valid for
means 400ms) .
The white user service quality

and the system capacity are
Immediately
default value.
the default value is set to
"on" to guarantee the VIP
performance
Immediately
the default value is set to

"on" to guarantee the VIP
performance
Immediately
the default value is set to "2"

to guarantee the VIP
Immediately
performance
if the function is opened, the
performance of common
users may be worse (the
service online maybe
Immediately
dropped and new ordinary
service maybe access failed).
So the feature is not
activated by default.
The value 0 indicates that

there is no need to add an
New connection
additional step size for the
or new radio link
SIR target increasing when
consecutive error TB occurs.
This parameter is set to 0

means there is no need to
increase the SIR target
increasing step size when
consecutive SIR target
increasing occurs.
The reason of the
experiences and the time of
turn off the power.
New connection
or new radio link
Take effect after

the change is
loaded to the
RNC
N/A
N/A
N/A
N/A
No
CORBA default value
Basic parameter
can not be
modified
No
CORBA default value
Basic parameter
can not be
modified
No
No
No
No
No
Yes
Yes
Yes
No
No
Function: switch of strategy

for VIP carrier frequency
Configuration Rule: This
parameter should be set
according to operator network
deployment.
Function: Downlink carrier
central frequency of VIP
Parameter
Function:
parameter should
be forced
set
handover
strategy
switch
for
according to operator
network
VIP
deployment.
Configuration Rule: VIP users
performance, non-VIP user
performance
When the switch is on, RNC
will handover non-vip user
Parameter
function: the
exceeding threshold
to nonswitch
of
Optimization
VIP carrier frequency toWhen
Load
Balance
Fail function
in
provide
VIPfunction:
performance.
Parameter
specifies
RAB
SETUP
procedure.
the function switch of whether
Parameter
factor:
RNC shouldcontrolling
execute DSCR
the
function
on
or
off.
Function:
Downlink
carrier
procedure when F2D
central frequency
of VIP
transferring
unsuccessfully
Configuration
Rule: This
with
UE returning
parameter should
be failure
set
configuration
related
cause.
deployment.
Open
when of
theUE
time
delay
of
the
number
RRC
status
soft
handover
needwith
to be
transferring
failure
shortened.
configuration related cause.
The parameter value with
"on" means that when UE
fails in transferring from
common RRC status to
dedicated RRC status with
the specified causes, i.e.
configuration unsupported,
The
parameter
is the switch
protocol
error, invalid
of
IMEI blacklist.
configuration
and
configuration incomplete,
RNC shall execute DSCR
procedure, Function:
making UE
enter
Parameter
This
IDLE statusisand
parameter
the reestablish
switch of
RRC
connection.
response
the LTEThe
Sonfunction
can
avoid
UE
staying
in
Transfer request
common status and with no
chance for transferring large
Because
load of neighbor
amount ofthe
data.
LTE cell is dynamic, RNC only
check the load periodically.
This parameter should be set

At next use
network deployment.

At next use
network deployment.
according to VIP users
At next use
performance and non-VIP
user performance.
N/A
Immediately

At next use
network deployment.

Immediately
open
The default value is "off", and

At Commit/New
the function is started when
users
needed.
According to the requirement

Immediately
of operator
N/A
Immediately
Based on the ability of

hardware of processing the
inter-board message
Immediately
No
No
Yes
No
No
No
No
No
No
No
Yes
Yes
This parameter is used for

controlling volume of
messages.The function of the
parameter is used for
reducing the breaking load of
Function:
Inter-RAT
handover
This
is used
for
CPU parameter
and the
breaking
volume
based
on
Eutran
load
controlling
volume
of RNC
of messages
because
Configuration
Rule:
messages.The
functiontoofCN.
the
send a lot of message
If
the
parameter
is for
"On" to
parameter is used
provide
moreload of
reducinghandover
the breaking
efficient.
canvolume
CPU andAs
theUMTS
breaking
acquire
the load
condition
of message
because
RNCin
Eutran,
inter-RAT
handover
Function
this
received aoflot
ofparameter:
messages
based
on Eutran
load
is taken
the
of cells
updating
fromnumber
CN.
into consideration
in order
SIB3
when Iu overloads
or to
is
avoid
access failure in Eutran
not
accessible.
becauseofofconsideration:
overload in Eutran
Factors
the
Function
this parameter:
system.Simultaneously,
UE
load of Iuof
, signalling
the
time
call
drop interval
may
happened
connection
of be
Uuupdating
in other
This
parameter
indicates
SIB3
among
when to
Iuthe
due to
limit ofcells
handover
frequencies/systems
number
of or
setup
cells
in oneis
overloads
is
not
Eutran.
The
value
of
this
parameter
period.
accessible.
If the parameter
"Off",to
larger,
more cellsisneed
Function
thisinparameter:
Factors
ofofconsideration:
the
access the
failure
Eutran
update
SIB3
when Iumay
is
the
number
of
cells
updating
load
of
Iu
,
signalling
be
happened
due
to
overload
overload or not accessible,
SIB3
when
Iu
is
connection
of chang
Uuchanged
in other
of
theGMS.
load
of Iu
more
from
overloads
to unoverload
frequencies/systems
quickly, but PingPang
of the
or
from
nothappens
to
The
value
ofaccessible
this parameter
is
load
of Iu
more
accessible
and
when
the
smaller,
the
time
interval
of
Function
this parameter:
easily, theofsignalling
DSAR
switch
is
updating
theofSIB3
shorter
the
time
interval
updating
connection
Uuchanged.
inisother
Factors
of
consideration:
when
Iu
is
overload
or
not
SIB3
among
cells
when
Iuthe
is
frequencies/systems may
load
of Iufrom
, signalling
accessible,
theoverloads
load of Iuto
changed
increase
connection
Uu
chang
moreof
quickly,
but
unoverload
or
from not
instantaneously.Otherwise,
The
value
of
this
parameter
PingPang
oftothe
of Iu
accessible
accessible
and
less cells need
toload
update
theis
larger,
more
cells
need
to
happens
more
easily,
the
when
is
SIB3, the DSAR
load ofswitch
Iu change
update
theconnection
SIB3
whenofIuUu
is of
signalling
in
changed.
more slowly,
but PingPang
changed
from
overloads
to
Parameter
Function:
This
other
frequencies/systems
Factors
of
consideration:
the
the load of Iu happens more
unoverload
orsignalling
from the
not multiparameter
may
increase
load
of Iu the
, indicate
signalling
difficultly,
accessible
to
accessible,
the
cell
E-DCH
transport
connection
of Uu will bearer
increase
load
of
Iu
chang
more
quickly,
mode.
the
time
interval
updating is
The
value
of thisof
parameter
smoothly.
but
PingPang
of the
load
of of
Iu
the
SIB3
is longer,
the
load
smaller,
the
time
interval
of
happens
more
easily,
the
Configuration
Rule:
It
needs
Iu
change
more
slowly,
but
updating the SIB3 is shorter
signalling
Uu
to
consider
the
of the
PingPang
of
thecapacity
loadorof
ofnot
Iu
when
Iu isconnection
overload
may
increase
transport
bearer.
happens more
accessible,
the difficultly,
load of Iuthe
For
multi-cell
E-DCHbut
signalling
connection
of Uu
chang
more
quickly,
less
cells
need
update
Transport
Bearer
Mode
will increase
PingPang
of smoothly.
thetoload
of is
Iuthe
SIB3,
the
load
of
Iu
change
"Separate
Iub
Transport
happens more easily, the
more slowly,
but
Bearer
Mode"
or PingPang
"Separate
signalling
connection
of Uu of
the
load
of Iu Bearer
happens
more
Iur
Mode",
mayTransport
increase
difficultly,
the
signalling
the
Mac-d flows from each
connection
ofdifferent
Uuofwill
increase
carrier
Iub
or
the timeuses
interval
updating
smoothly.
Iur
transport
bearers.
the SIB3 is longer, the load of
Downlink
Reserved
Parameter
Function:
This
For
multi-cell
E-DCH
Iu change
more
slowly,
but
Bandwidth
forthe
VIP
UE's
I/B
parameter
indicates
the
Transport
Mode
PingPang Bearer
of
load
of is
Iu "UL
Traffic
Admission
Control
Switch
for
Flow
Multiplexing
Mode",the
the
The
parameter
indicates
happens
more difficultly,
High
Priority
Traffic
when
EMac-d
flows
received
onUu
the
switch
of
filtering
the of
signalling
connection
DCH
User
Number
Resource
different
carriers
in the
Node
incomplete
neighboring
cells
will increase
smoothly.
Congestion
CELL_DCH
B is
multiplexed
onofone
in
SIB.If
the in
value
theIub or
State.
Iur transport
Macparameter
is bearer
1 (On) (per
, RNC
will
Factors
consideration:
d flow)
filter
the. of
neighboring
cells
Whether
high
priority E-DCH
configured
incompletely
in
service
is
setup
E-DCH
SIB .The defaulton
value
is 1
when
(On) . cell E-DCH user
number limited
Configuration Rule: if the
parameter is set to "On", high
priority E-DCH service will be
setup on E-DCH when EDCH user number limited and
lower priority E-DCH user
existed in the cell; if the
parameter is set to "Off", high

inter-board message
Immediately

inter-board message
Immediately
User experience is
default value.
At next use
experienced
Immediately
Consider the load of Iu and

the signalling connection of
Uu in other
frequencies/systems
When system
information type 3
is changed

Uu in other
frequencies/systems
When system
information type 3
is changed

Uu
When system
information type 3
is changed

Uu
When system
information type 3
is changed
Separate Iub/Iur Transport

Bearer Mode will not
increase the requirement of
the transport bearer.
Immediately
N/A
New Session
default value equal 1 (The

function is on)
Immediately
New Function, the dafault

value is "off" for system
safety
at next use
No
No
NO
Yes
Yes
No
No
No
No
Yes
Yes
Yes

Invalid parameter, Only event
algorithm is supported.
planning.
"Main function: This
using the fast reconfiguration This parameter should be set
Invalid
event
functionparameter,
during theOnly
relocation
algorithm
is
supported.
in.
planning.
Influence factor: whether the
RNC and the NODEB support
fast reconfiguration function.
The
If thefunction
functionofisthis
turn on,
default value equal 0 (Off)
parameter:
Thisrelocation
parameter
During the UE
to
indicates
the
Switch
of
VIP
Parameter
function:
network
the RNC, the
RNC use
fast
User
State Transfer.
If the
reconfiguration
may avoiding
value
is set
"0: Off", the
parameter.
Ittoindicates
the
too much
Measurement
the network does not need
VIP
User
can
not
switch
switch
of EMI
function
in to
CONTROL
message
block
this function and switch on
Parameter
Function:
When
CELL_FACH/CELL_PCH/UR
CDT-CR
the
this function will increase the
inter-rat
measurement
is
A_PCH/IDLE
state from
Parameter controlling
factor:
load of CPU
initialized,
if
intra-frequency
CELL_DCH
state;
If
the
value
the
measurement report
RECONFIGURATION
handover
is
triggered,
interis
set
to
"1:
On",
the
VIP
User
acquisition
requirement
message.
For VIP user only exists in
rat measurement
will be
can
switch to
testing case. State transfer
update/modify.
due
to
the
function is switched for VIP to
transmission
delay
of
radio
A_PCH/IDLE state from
guarantee the testing
interface,
RNC
may receive
CELL_DCH
state;
UE
reportsofbased
on original performance.
Influence
this parameter:
inter-rat
measurement
PS performance
of VIP user.
configuration.
Suggestion for setting this
RatCelInfoSwch
introduced according to mobility
parameter: RNC is
Global
to
controll
the
strategy.
If the
the performance.
switch,
setting
according
to
Parameter
Function:
Set
RatCelInfoSwch
is
1,
the
VIP PSthat
Testing
Timer
RNCPerformance
receives the
measurement
report
based
requirement
suggest
to
Paging Type1and
Message
on
original
inter-rat
set
to
"0:
Off"
to
guarantee
Respons.if the Timer is too
This parameter is set
measurement
configuration
the
VIPit PS
Testing
small,
may
not
receive the
Parameter
Function:
according to experience.
will
be
handled
to
improve
Performance.
Response
message.If
the
Configure
the
Maximum
handover
timeliness.
value
is too
larger,
mayof
If
the average
data
Satellite
Number
initrate
Position
Configuration
Rule:
mobility
waste
system
time
and
cause
users
carried
on
FACH
is
measurement
Control
When
therelease.
switch
is off, thefor
Instance
lower
than
this
parameter
Message.
If thewill
value
is
inter
ratoverload
report
not many
betoo
This parameter is set to 6
FACH
when
small
, it is not good
for ue to
handled.
according test result in lab.
users
carried
FACH,
new
position
, elseon
if the
Value
is
traffic
will
be
refused
to
too large, the Uu
access
to FACH.
measurement
Control
Larger
the
little
the
Message isparameter,
too long and
may
set according to the user
users
can access
to the
block ohter
Uu message.
number required to be
FACH;
carried on FACH.
Lower
the parameter,
lower
Parameter
function: the
the
minimum
data
ratethe
of
switch
whether
When
Function:
Switch
of
Permit
users
carried
on
FACH;
RNC receive UCIU ERRORPS
Handover
from
This parameter
should
while
waiting
forLTE
the to be set default value equal 0 (The
UTRAN
Because
of CSFBuser
according
to the
average
ACTIVESET
UPDATE
function is off)
Configuration
Rule:
Theuser
data
rate onfunction:
FACH
and
COMPLETE,
the RNC
Parameter
the
function
is off
. to right
number
required
bethe
carried
release
the
service
now,
switch whether
When
on
FACH.
not
trigger
the
call
reRNC receive RL FAILURE
establishment.
The default value is "off", and
while waiting for the
ACTIVESET UPDATE
needed.
Parameter
controlling
factor:
COMPLETE, the RNC
the
function
on
or
off.
release the service right now,
positive
effects:
This
not
trigger
the call
re- function
can fasten release the service The default value is "off", and
establishment.
and improve the resource
utilization
ratio,
when the
Parameter
controlling
factor: needed.
RNC
receiveon
UCIU
ERROR
the function
or off.
while
waiting
for
the
positive effects: This function
ACTIVESET
UPDATE
can fasten release
the service
COMPLETE.
and
improve the resource
utilization ratio, when the
RNC receive RL FAILURE
while waiting for the
When best cell is

changed
When best cell is

changed
New connection
take effect when

the new voice
service set up
Immediately
At next use
At next use
At next use
Immediately
Immediately
Immediately
Immediately
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
No

whether RNC dicard rerouting
LU-Reject/Attach-Rej when
the
link of subsequent
Iu is
Parameter
function: This
break
parameter
indicates whether
Factors
consideration:
If
the RNCofswitch
on the DSAR
the
operator
require
the
UE
function.
continue
doing
LU/Attach
Parameter
controlling
factor:
when
the
previous
CN
the requirement of operator
require
RNC redirection
Configuration
Rule: If theand
the subsequent
not
operator
requireIu
the
RNC to
accessible.
restrict some UE to initiate an
Parameter
Function:
access when
the Iu isSwitch
of
Closing
Frequency
overload or not accessible, or
Intelligently
Function.
to bar the cell
when the Iu of
Configuration
PLMN Of MIB Rule:
is notThis
parameter
configured
accessible,isthe
operator can
based
the requirement on
switch on
it on.
the power saving.
Parameter Function: Rnc
switch for handover based on
uplink Bler
Function
ofcontrolling
this parameter:
Parameter
factor:
This
parameter
indicates
the
the function on or
off.
how long time to admit all UE
Parameter
Function:
when the SSCOP
linkRnc
switch for handover
based on
congestion
disappeared.
transmit
power
Factors of
consideration:
Parameter
controlling
factor:
SSCOP
congestion
level,
Parameter
Function:
This
the
function
on
or
off.
user
capacity.
parameter
indicates the IMEI
The
value
is bigger,
based power
controlthe
function
restore When
time when
SSCOP
switch.
this switch
is
congestion
disappeared
on, some power
control is
smaller,
the can
probability
of
parameters
be configured
SSCOP
congestion
is
lower,
based on IMEI.
the
system is safer.
Configuration
Rule: Based on
The
value is smaller the
the requirement.
restore
time
whenisSSCOP
When this
switch
on,
congestion
disappeared
is
different UEs distinguished
longer,
the
probability
of
Parameter
Function:
This
based on IMEI can use
SSCOP
is higher,
parameter
is licenseand
different congestion
power
control
the
system
is
more
should
be
set
according
to
parameters.
dangerous.
requirement
from is
operator.
When
this switch
off,
Configuration
Rule:
different UEs distinguished
requirement
from
operator
based on IMEI
cannot
use
(commercial
agreement)
different power
control .
parameters.

at next use
not needed
Immediately

configured by network
planning & optimization
Immediately
engineer based on the power
saving requirement of
operators.
N/A
Immediately
N/A
Immediately
Experienced
at next use
Based on the requirement.
At Commit/New
users
It's a License parameter and

should be set according to
New connection
operator's requirement.
Reserved parameter, default

reserved parameter
Immediately
value equal 0
The reserved parameter is
used to config "board user
admission control method" in
this version. Value 0 is
respond RRC CONNECTION
Default value equal 0
Immediately
REJECT when user num
exceed upper limit in valid
period; value 1 is discard
RRC CONNECTION
REQUEST
reserved parameter
Immediately
value equal 0

used to config "RNC PS 0
kbps support indicator" in this
version.
Immediately
No

used to config "BER target
adjustment switch" in this
version.
Immediately
No

used to config "board user
admission control threshold" Default value equal 0
in this version. Value range is
0 to 65535
Immediately
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
No
No
No
Yes
No
Bit0, Bit1 of the parameter

function: Switch of HSUPA
TTI Configuration Method for
N/A
VIP User. 0: off
1: 2ms E-TTI is initially
allocated, and 2ms/10ms TTI
transfer is allowed
2: 2ms E-TTI is fixed
allocated,
and 2ms/10ms TTI
N/A
transfer isn't allowed.
the function on or off
Bit11 function of the
Bit2
parameter:
the switch of
N/A of the parameter
function:
Switch
of SRB
function that
whether
to judge
Transport
ack exists Channel
to be send or
Configuration
Method
received in RLC
when for
PSVIP
User.
0: close to
thePCH/IDLE
function; 1:
state transfer
or
open
PS . the function.
Parameter
controlling factor:
factor:
the
function
or or
offoff
the function on
is on
Parameter setting
Bit3
of the parameter
suggestion:
the function
function:
of the
should bethe
onswitch
to prevent
function
that
whether
CE
ping-pong state transfer
access
control
down
to
the
triggered by ack package
NODEB. 0: close the function;
1: open the function.
the function on or off
Bit4 of the parameter
function: the switch of
the default state is off for new

at next use
function
default value of bit0, bit1: off
default value of bit2: off
default value of bit8:
preferred to Cell_DCH
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
N/A
N/A
at next use
No
Yes
Yes
No
Yes
Yes
No
Yes
No
No

switch of CQI feedback cycle
and CQI repetition factor
adjustment based on load.
Basic
index Rule: It needs
Configuration
to consider the uplink
capacity.
If the switch is on, the CQI
feedback cycle and CQI
Function:
Switchisofconfigured
the DCH
repetition factor
27.2kbps
to be
based on Rate
uplinkwhether
load and
Used
foruser
VIP number,
User's Initial
HSDPA
and it
RRC
Connection
Setup
can improve
the uplink
To
turn
on
the
function,
it can
capacity.
speed
the
VIP
user's
If the switch is off, the CQI
signalling
process,
feedback cycle
andbut
CQIit will
also
occupy
more
repetition
factor
is power
fixed, it
resource.
might
affect the uplink
If
the parameter
is "On", RRC
capacity. will be setup on
connection
DCH
with This
the rate
of 3.4kbps
Function:
parameter
for
bad
coverage,
it
indicates whether tocan
activate
improve
the of
RRC
Connection
the
function
AMR
initial
setup
success
data
rate
decreasing
The function
ofratio.
this in bad
coverage E-DCH
parameter:
factor:
Throughput
Measurement
cell traffic
volume and
Event
4B Counter
Threshold
Function
of this parameter:
coverage
for
the HS-DSCH/E-DCH
to
This
parameter
indicates
It
is
suggested
to
enable this
HS-DSCH/DCH.
RNC
SAI high
function
in system
thefilling
cellreceives
with
Whensupport
the
corresponding
to atbad
least one
traffic volumeEToD4BtimesThr
and
consecutive
of
the cells measurement
from which the UE
coverage
throughput
is
consuming
resources
reports
(Eventradio
4B) on
the EParameter
Function:
This
Factors
of
consideration:
Parameter
Function:
This and
DCH from the user plane,
parameter
indicates
the
function
If Operators
parameter
the
Event 6Aswitch.
isindicates
reported
by UE,
default
ARP
require,
set
it
as
1.otherwise
switch
for
ARP
the UE will be switched form 0
Priority)
Priority)
HS-DSCH/E-DCH to HSsegment.
When
the
function
based
BLER function.
DSCH/DCH.
switch
for ARPRule:
based BLER
Configuration
If its value is larger,
the
is
off,
get
the
power
control
When
the
switch isfor
on,
users
channel
switching
the
HSparameters
based
on
this
with
different
ARP
have
DSCH/E-DCH to HSdefault
ARP
segment.
The
different
service
target
BLER,
DSCH/DCH
is more
difficult
to
ARP
segment
contains
itbemeans
have different power
triggered;
golden,
silver and bronze.
control
parameters.
If its value
is smaller, the
The
order
of priority:
golden
When
the
switch
isfor
off,
theHS->
channel switching
the
silver
>
bronze.
ARP
is not need
be
DSCH/E-DCH
to to
HSConfiguration
Rule:
consider
when
get
the
Parameter
Function:
DSCH/DCH is easier This
topower
be
0:
it means
get the power
control
parameters.
parameter
indicates
the ARP
triggered.
control
parameter
as Priority)
Adjustment
Suggestion:
subscriber
with
golden
Configure of
thegolden
parameter
threshold
priority
priority,
theto
service
quality is
according
the in
requirement.
subscriber
used
power
very
good,
but
control.
ARP
ofthe
thesystem
golden
capacity
is
small.
priority subscriber is not
1:
it means
power
bigger
than get
thisthe
threshold.
control
parameter
as
Configuration Rule:
subscriber
with
priority,is,
This smaller
thissilver
parameter
the
the
the service
less thequality
user beand
defined
system
capacity
is
neither
too
as the golden priority users,
good
nor
too
bad.
that is, the less the user has a
2:
it means
the power
high
quality get
of service,
and
control
parameter
as
the higher the system
subscriber
capacity. with bronze
priority,
the service
quality is
This bigger
this parameter
is,
not
good,
but
the
system
the more the user be defined
capacity
is large.
as the golden
priority users,
that is, the more the user has
a high quality of service, and
the lower the system capacity.
This parameter is invalid
when BlerArpSwitch = 0.
Basic index
Cann't Modify
Consider the uplink capacity. Immediately
The reason of the

to consider the utilization
ratio of radio resource.
At next use
New function, the default is

off.
At next use

according to cell traffic
volume and coverage
Immediately

at next use
not needed

At next use
Configure the parameter

Immediately
according to the requirement.
The default value of this

parameter has considered
service quality and system
capacity.
Immediately

capacity.
Immediately
No
No
No
Yes
Yes
Yes
No
Yes
No
No
threshold. And the silver

priority subscriber is defined
as this ARP not bigger than
the ARP threshold of bronze
priority
subscriber,
and
bigger
Parameter
Function:
This
than
the
ARP
threshold
parameter indicates the of
load
golden
priority subscriber.
filter coefficient.
It is used in
Configuration
uplink
RoT Function:
andRule:
downlink
Parameter
This is,
This
smaller
this
parameter
effective load
filter.
parameter
indicates
the
load
the more the user
beIt defined
Configuration
Rule:
can in
filter
coefficient.
It
is
used
as
the bronze
users,
guarantees
thepriority
filtering
uplink
RoT
and
downlink
that
is,
the
more
the
user
results
and
reflects
the has
effective
load
filter.
a
low
quality
of
service,
and
measurement
results
in
time.
Parameter
Function:
Configuration
Rule:
ItThis
can
the
higher
the
system
The
larger
this
parameter
is,
parameter
indicates
the
guarantees
the filtering SIR
capacity.
the new
loadreflects
measurement
target
rapid
convergence
results
and
the
user
This
bigger
parameter
is,
result
will
bethis
more
obviously
switch.
When
this
switch
is
number
statistical
results
in
the
less
the
user
be
defined
affect
the
load
filter
result.
on,
the SIR target can be
time.
as
the
bronze
priority
users,
The
smaller
this
parameter
decreased
rapidly
to the
SIR
The
larger
this
parameter
is,is,a
that
is,
the
less
the
user
has
the
new
load
measurement
target
based
on
BLER.
the
new
equivalent
user
low
quality
ofless
service,
and
the
result
willstatistical
be
obviously
Configuration
Rule:
The
value
number
result
will
lower
the
system
capacity.
affect
load
the filter
result.the
of
this
parameter
should
be
more
obviously
affect
This
parameter
is invalid
consider
the
service
quality
equivalent
user
number
when
BlerArpSwitch
0.filter
Parameter
Function:
and
system
capacity.=This
result.
parameter
indicates
thethe is,
When
the switch
is on,
The smaller
this parameter
uplink
BER
OLPC
algorithm
SIR
target
can
be
decreased
the new equivalent user
switch
rapidly
the SIR target
numbertostatistical
result will
Configuration
Rule:
The
value
based
the service
BLER,
be lesson
obviously
affect
the
of
this
parameter
should
so
the system
equivalent
usercapacity
numberisthe
consider
the
quality
improved,
butservice
the service
filter result.
and
system
quality
in thecapacity.
beginning might
When
this algorithm is
be affected.
opened,
SIRSuggestion:
target can be
Adjustment
decreased
when
there
is no
When
system
uplink
capacity
Parameter
Function:
This
data,
so
the
system
capacity
is
limit, thisindicates
function can
parameter
the be
is
improved, but the service
open.
shield period switch
quality might be affected.
Configuration Rule: The value
consider the service quality
and system capacity.
The shield period algorithm is
used to control the speed of
SIRtarget increase, so the
system capacity is improved,
but the service quality might
be affected.
parameter indicates the BER
filter coefficient.
Configuration Rule: It needs
to consider the wave of BER.
If
the parameter
is tooThis
big, the
Parameter
Function:
fluctuation
of
BER
is
too
big.
parameter indicates which
If
the
parameter
is
too
small,
normal outer loop power
the
change
of BER
cannot
control
algorithm
is used.
not
be
reflected.
There are two kinds of normal
outer loop power control
Parameter
Function:
This
algorithm: BLER
Target
parameter
the time
Algorithmicindicates
and Threshold
window
size of opening shield
Algorithmic.
period
Configuration Rule: SIRtarget
Configuration
Rule:ST-SIR,
It needs
adjustment speed,
to
consider
the
subservices
ST-BLER,
etc.
and application
scenarios
parameter
indicates
the
If
the parameter
is tooshield
big, it
threshold
of opening
is
too
easy
to
trigger
the
period.
shield
action. Rule: It needs
Configuration
If
the
parameter
is too small,
to consider the subservices
itand
is too
hard
to
trigger
the
application scenarios
shield
action.
If
the parameter
is too big, it
is too hard to trigger the
shield action.
If the parameter is too small,
it is too easy to trigger the
shield action.

capacity.
Immediately
The actual application is

default value.
Immediately

default value.
Immediately

parameter considers the
service quality as priority.
New connection
or new radio link

New connection
or new radio link

New connection
or new radio link
Reflect the change of BER

and decrease the BER
fluctuation.
New connection
or new radio link

New connection
parameter meets the need of
or new radio link
ST-SIR, ST-BLER, etc.
The shield action is triggered New connection

at the right time.
or new radio link
The shield action is triggered New connection

at the right time.
or new radio link
No
Yes
No
No
No
No
Yes
Yes
No
No
No
No

shield period.
to
consider
the service
quality,
"Main
function:
This
the
system
capacity.
If
the the
parameter
is too big, it
bring
RXLEV-NECELL
might affect in
the service
information
quality.
oldBSS_ToNewBSS when
If
the parameter
is too small,
inter-system
handover
to
itGSM.
might affect the system
capability.
Influence factor: whether the
GSM support RXLEVNECELL information.
If
the function
is turn on,
GSM
Parameter
Function:
Modify
can
find
the
suitable
the PLMN of NAS message
frequency
according the
if cell has multi-plmns,
set the
RXLEV-NECELL
information.
value as 1, Function:
otherwise
as 0
Parameter
This
parameter indicates the mode
Parameter
Function:
of PS handover
from Fill Cn
InformationEutran.
IE in Uu
UTRANto
PSMessage
or
Not
handover
or redirection can
ifbecell
has multi-plmns,
set the
adopted
based on UE
value
as
1,
otherwise
as
0
capability.
Function: Timer of Deactivate
Configuration
Rule: for
UEFast
Compressed Mode
capability,
QOS, Operator
Return
to Eutran
requirement
Related factor: the time of
For
PS handover
compressed
modemode,
active and
handover
delay
is smaller and
UE measurement
service
QOS is better,
but the
This parameter
is smaller,
some
UE
may
not
support
the
This
parameter
indicates
activation time of compressed
capability.
On the
contrary,
for
whether
using
Faster
L1 may
DCH
mode is shorter
and
UE
redirection
mode,
service
synchronization
for VIP
user.
Parameter
function:
specifies
not finish measurement.
need
suspend
each
UEis
Parameter
factor:
the
timer
ofcontrolling
CSbut
paging
resend
Otherwise,
this
parameter
can
support.
the
function
turns
on
or
off.
in
PCH the
status.
When time of
bigger,
activation
ifcompressed
the function
is opened,
receiving
CS mode
paging
PCH
isinlonger
Parameter
function:
specifies
when
VIP
user
oncell
DCH
status,
RNC
sends
Paging
but which
impact
the
switch
ofURNTI
CScan
paging
channel,
which
indicate
Type
1 with
and
starts
throughput.
resend
in
PCH
status.
the UE
faster
DCH
this
timer,
killsL1
this
timer when
Parameter
controlling
factor:
synchronization
and
lower
the
receiving paging
response,
paging
success
ratio.
timer
cost
in
RAB
SETUP
and resend Paging Type 1
The
parameter
value
"on",
procedure
.
with
IMSI when
this timer
means
thatmay
RNC
will resend
Some out.
UE
doesn't
times
Paging
1 with IMSI
support Type
thecontrolling
function
very
well.
Parameter
factor:
when
RNC
fails
paging
paging success in
ratio
and UE
in
PCH status with URNTI.
delay.
The
value "off",
The parameter
larger parameter
value
means
notthe
do
means that
that RNC
RNC will
waits
the
above
resend.
CELL UPDATE message
longer, paging resent later,
and paging delay is
increased.
configuration
accordingvalue
the
The smaller parameter
Operator.
means that RNC waits the
CELL UPDATE
message
Parameter
function:
network
shorter, paging resent sooner,
and paging location
delay is area
parameter.
decreased. But the too small
code.
value
may causes
the factor:
paging
Parameter
controlling
resent
before
UE
sending
It is decided by the network
CELL UPDATE
message,
planner
according
to the and
it makes deployment.
the resent paging
network
Parameter
Function: This
invalid.
parameter indicates Routing

parameter meets the need of New connection
the service quality, the
or new radio link
system capacity.
default value equal 1 (ON)
New connection

according to .experience.
Immediately

according to .experience.
Immediately

according to UE capability,
When best cell is
QOS and Operator
changed
requirement
The time of compressed
mode active and UE
measurement is considered
At Next Use
The default value is closed,

open the function when
need.
Immediately
The default value is closed,

open the function when
need.
Immediately

according to experience.
Immediately
N/A
at next use
N/A
At Commit
N/A
can not be
modified
No
No
No
No
No
No
No
No
No
No
No
No
Parameter function: network

parameter. routing area code.
planner according to the
network deployment.
parameter indicates Service
Function: Service area code
for CS and PS domain
deployment.
This
parameter
indicates
MO
Parameter
function:
network
object
ID.
parameter. It is required to be
configured when the cell
supports the cell broadcast
service. Otherwise, this
parameter is not required to
be configured.
This
parameter
indicates
planner
according
to the
Object
and is unique in
networkIDdeployment.
Parameter
function:
network
father Object
.
parameter. The number of
GSM frequency band.
Parameter
function: network
It is to be configured
by
network planner according to
parameter.
thefrequency
frequency
the actual 2G
lower
of a specific
range range
interacting
with 3GGSM
BCCH
distribution table.
network.
Parameter
factor:
function: network
It
is
to
be
configured
by
network
planner
according to
parameter.
the frequency
the
actual
2G
frequency
upper range of a specific
range
interacting
with 3Gtable.
GSM BCCH
distribution
network.
It
is to be configured
by
Parameter
function: network
network
planner
according
to
the
actual
2G
frequency
parameter. The number of
range
interacting
with 3G by
frequency
band supported
network.
RNC.
Parameter
Parameter function:
controllingnetwork
factor:
It is to be configured by
parameter.
the lower
range to
of
network planner
according
a
specific
UTRAN
FDD
actual frequency range used.
frequency.
Parameter
factor:
function: network
network
planner
according
parameter.
the upper
rangetoof
actual
frequency
range
lower range of a specificused
in
the 3GFDD
network.
UTRAN
frequency.
network planner according to
actual frequency range used
in the 3G network.
N/A
At Commit
N/A
can not be
modified

New connection
network deployment.
Basic index
can not be
modified
N/A
At Commit
Basic parameter
can not be
modified
N/A
At Commit
N/A
At Commit
N/A
At Commit
N/A
At Commit
N/A
At Commit
N/A
At Commit
Yes
Yes
Yes
NO
NO
No
No
No
No
No
No
No

indicates whether AMR rate
adjustment is supported or
not.
Configuration: If the multi-rate
AMR are supported
and the
Function:
This parameter
CS
voiceswhether
traffic load
very
indicates
the is
QoS
high,
for
example
DPCH
negotiation during RAB no
code
is frequently
took place,
establishment
or relocation
that
dynamic
AMR
rate
and the QoS renegotiation
adjustment
could
effectively
during the conversation after
reduce
the system
load, the
the
service
is established
are
function
open.
permittedshould
by thebe
RNC.
Configuration Rule: The open
Parameter
function:
or close of RAB
QoSnetwork
negotiation/renegotiation
Main
function: This parameter
parameter.
the
switch
of the
depends on
the
demand
of
indicates
the
integrity
MR
function.
operator.
protection algorithm that RNC
ParameterAtcontrolling
factor:
supports.
present, UIA1
function
or off. is
and UIA0onalgorithm
supported.
Main function: This parameter
Influence
factor:
The needing
indicates the
integrity
of
the
operator
with
protection algorithm the
that RNC
integrity protection.
supports.
At present, UIA1
UIA1:
offering
the integrity
and UIA0
algorithm
is
protection
with
algorithm 1.
supported.
The
parameter
should
Influence
factor:
Theparameter
needing
Main
function:
This
reference
with
CN
side.
of
the
operator
with
the
indicates the encryption
integrity protection.
algorithm
that the RNC
UIA2:
offering the integrity
supports.
protection
with algorithm
2.
Influence factor:
The needing
The
parameter
should
of
thefunction:
operatorThis
with parameter
Main
reference
with CN side.
encryption.
UEA0: means
no encryption;
algorithm
that the
RNC
UEA1:
means encryption with
supports.
algorithm
1.
Influence factor:
The needing
The
parameter
should
of
the
operator
with
Main
function:
parameter
reference
with This
CN side.
encryption.
UEA0: means
no encryption;
algorithm
that the
RNC
UEA1:
means encryption with
supports.
algorithm
1.
Influence factor:
The needing
The
parameter
should
of the operator with
reference
encryption.with CN side.
UEA0: means no encryption;
UEA1:
means encryption
This parameter
indicates with
algorithm
1.
whether AMR 4.75 kbps is
The
should
usedparameter
or not. AMR
12.2 kbps is
reference
with
CN
side.
most frequently used.
And
other AMR modes can be set
to
"Not
used". indicates
This
parameter
used or not. AMR 12.2 kbps is
most frequently used. And
to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
to "Not used".
Usually, the benefit of AMR

rate adjustment for the
capacity is not so great.
Take effect for the

next call
By default RAB QoS

negotiation/renegotiation are
all closed which should be
adjusted according to the
demand of operator.
At next use (i.e.,

shall not affect
ongoing
connections)
N/A
At Commit/New
users
The default value is the

normal choice.
Immediately

normal choice.
Immediately

normal choice.
Immediately

normal choice.
Immediately

normal choice.
Immediately
AMR 12.2 kbps is most

frequently used. And other
AMR modes can be set to
"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call
No
No
No
No
No
No
No
No
No
No
No
No

to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
This
parameter
to "Not
used". indicates
whether WB AMR 6.6 kbps is
used or not. WB AMR 12.65
kbps/8.85 kbps/6.6 kbps is
other
AMR modes
can be set
This parameter
indicates
to
"Not
used".
whether WB AMR 8.85 kbps
is used or not. WB AMR
12.65 kbps/8.85 kbps/6.6
kbps is most frequently used.
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And
AMR indicates
modes can
This other
parameter
be
set
to
"Not
used".
12.65 kbps/8.85 kbps/6.6
And other AMR modes can
be set to "Not used".

"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call

"Not used".
Take effect for the

next call
WB AMR 12.65 kbps/8.85

kbps/6.6 kbps is most
"Not used".
"Not used".
"Not used".
"Not used".
"Not used".
"Not used".
"Not used".
"Not used".
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
Take effect for the

next call
No
No
No
No
No
Yes
Yes
Yes
No
No
Yes
Yes
function
of this parameter:
This parameter
indicates
Configure
IuFlex
NASkbps
whether WB
AMRthe
23.85
node
selection
timer
Factors
of consideration:
12.65 kbps/8.85
kbps/6.6 the
time
of CS paging
kbps tolerance
is most frequently
used.
CN
And other AMR modes can
The
value
is bigger,
be set
to "Not
used".the
paging
without
TMSI success
rate
is
higher,
the
indicates the lowernumber
limit of of
cached
IMSI
in
RNC
is larger,
guaranteed bit rate used
for
and the
occupied memory is
QoS
Function:
This
parameter
larger.
for
uplink the
services.
indicates
lower limit
The
value is smaller,
theof
Configuration
Rule:
guaranteed
bit
rate
used
for
paging
without
TMSI
success
Considering
user
experience
QoS
rate
is lower,
the number
and
the
successful
rateThis
ofof
for
Downlink
services.
cached
IMSI
in
RNC
is
access. This
Function:
parameter
parameter
is the
only
valid when
smaller,
and
occupied
The
higher
the
parameter,
indicates
the
level
number the
of
CN
indicates
unspecified
memory
is
smaller.
better
user
experience
and bit
the
negotiated
guaranteed
negotiation
method
of GBR
to
the
lower
successful
rate.
This access
parameter
is shared
RNC.
rate
whenand
system
by
uplink
downlink.
Configuration
Rule:load is
high.
And
vice
versa.
Configuration
Rule:
Considering user
experience
Considering
user experience
and the successful
rate of
when
upgrading UE's GBR
access.
and
smoothness
of thethe
The the
higher
the parameter,
raise
system
load when
betterofuser
experience
and
upgrading
GBR. successful
the lower access
The
more level
number,
rate when
system
load isthe
Parameter
function:
smoother
increment
to the
high. And vice
versa.network
system load when upgrading
parameter.
thethe
switch
of the
the
the GBR, but
worse
Parameter
function: network
CDT
function.
user experience.The
Parameter
controlling
configuration
of the factor:
parameter.
switch
function
on
oraoff.
Function:
Rx-Tx
time of the
parameter
isthe
tradeoff
IMEI
acquisition
function
in
difference
adjustment
switch
between above
two
factors.
themacro
CDT. diversity
in
Parameter
controlling
Configuration
Rule: factor:
function
on
or
off,isRNC
If the parameter
"On",
If
some
venders
don't support
system
performance.
when
downlink
receiving
time
Function:
prohibition
inter-frequency
and
inter-rat
If
the
function
turns
on,
it may
will
change
along
with
the
handover
timer
after inter-rat
compressed
influence
RNC
moving ofthe
themode
UE orsystem
with the
handover
failure
simultaneously
configuration
performance.
drifting
of the clock
between
Configuration
Rule:
system
via
IUR,
value
1, to
Node
Bs,the
which
willislead
resource
otherwise
the
value
is
the
degradation
of the 0.
UE
After
inter-rat
handover
is
Function:
compressed
mode
downlink
quality
or
even
failure,
if
the
parameter
iscall
configuration
strategy via
IUR
drop.
larger, next handover
interval
Configuration
Rule:
If
the
parameter
is
"Off",
call
is
longer, which
may increase
compatibility
equipment
drop
maypossibility
be of
happened
call-drop
due when
to
vendor
downlink
receiving
time
quality
getting
bad.
If
the parameter is "0", RNC
change.
If
the
parameter
smaller,
will
configure
twoistypes
of
next
handover
interval
is
accompanying compressed
shorter
and handover attempt
mode (inter-frequency
and
is
more
frequent,
which
inter-RAT)
.If SRNC
andwill
occupy
more
system
DRNC
all
belong
to ZTE,
Function:
Switch
for
PS this
resource.
parameter
should
be
Handover with LTE set "0".
If the parameter
is "1",
RNC
Related
factor: the
actual
net
will
configure only one type of
planning
accompanying
The parameter compressed
indicates
mode
(inter-frequency
or
whether
RNC
support
PS
Function:
RNC
SRVCC
inter-RAT)
based
on
the
handover
with LTE
Switch
specific value of
Related
factor:
actual
net
IfOrRatHoSwch.the
When
DRNC
planning
belong to other equipment,
The
parameter could
indicates
this parameter
be set
whether
RNC
support
"0".
SRVCC.

"Not used".
Take effect for the

next call

Immediately
suggested by 3GPP protocol
At next use (i.e.,

The value is a tradeoff
shall not affect
between user experience and
ongoing
the access success rate.
connections)
At next use (i.e.,
The value is a tradeoff
shall not affect
between user experience and
ongoing
the access success rate.
connections)
Tradeoff of user experience
when upgrading UE's GBR
and the smoothness of the
raise of system load when
upgrading GBR.
The default value is off to
decrease the influence to the
RNC system performance. It
is on when there are
requirements.
requirements.
At next use (i.e.,

shall not affect
ongoing
connections)
At Commit/New
users
At Commit/New
users
Service continuity is
default value.
At next use
System resource and

handover success rate are
default value.
At next use

COMPMDCFGST
deployment and compatibility RA
of equipment vendor.
the actual net planning is
default value.
Immediately

default value.
Immediately
No
No
No
No
No
No
No
No
No
No
Yes
Yes

parameter indicates the Initial
AMR data rate when cell load
is high.
Configuration Rule:
The
value of
the parameter
Parameter
Function:
This is
larger,
the
initial
AMR
data
Initial
rate
is
higher,
and
the
QoS
is
AMR data rate when cell
load
better;
is
high.
The
value of the
parameter is
Configuration
Rule:
smaller,
the
initial
AMR datais
The value of the parameter
rate
is
lower,
and
the
larger, the initial AMR system
data
is
larger,
but the
QoS
isQoS is
rate
is
higher,
and
the
The
function of this
worse.
better;
function
of this
parameter:
Thisparameter:
parameter
The
value
of
parameter
Configure
null-NRI
ofHandling
CS is
indicates the the
Traffic
smaller,
the
initial
AMR
Domain(THP) segment data
Priority
rate
is lower,
and
thewill
system
Factors
of The
consideration:
threshold.
THP
bethis
is
larger,
but
the
QoS
is
parameter
mapped
byneed
RNCto
tobe
different
worse.
negotiated
withupon
CN, this
and
THP
segment
function
of this
parameter:
configured
according
to
parameter
which
is of
used
in
Configure null-NRI
PSthe
CS.
the
mapping of the Basic
Domain
Priority
.ForRate
THP in the
Factors (BP)
ofUplink
consideration:
this
Function:
same
THP
Segment,
parameter need
bethe
Adjustment
LeveltoNumber.
same
BP value
will
negotiated
withRule:
CN,be
Configuration
Itand
needs
mapped.
configured
according
to consider the data to the
The
involved
factor for
CS.
throughput
demand,
thesetting
this parameter:
BPresource
of different
utilization
of
radio
Function:
Uplink Rate
THP
users;
and
the
call Operator
completion ratio.
Adjustment
Level.
requirement.
Adjustment
Suggestion:
more
Configuration
Rule:
It needs
Influence
ofcan
this
parameter:
rate
levels
guarantee
the
to
consider
the data
This
parameter
indicates
the
radio
resource
is
more
even
throughput
demand,
the It
Function:
Downlink
Rate
THP
segment
threshold.
distribution.
But
if the
rate
utilization
of
radio
resource
Adjustment
Level
Number.
should
be
set
according
to
levels
are
too
many, it may
and
the
call
completion
ratio.
Configuration
Rule:
It
needs
operator's
requirement
(THP
result
in the Suggestion:
frequently more
Adjustment
to
consider
the data
value
and category)
reconfiguration.
rate
levels can
throughput
demand,
Suggestion
for guarantee
setting
thisthe
Implementation
ofmore
thethe
three
radio
resource
is
even
utilization
ofQos
radio
resource
parameter:
Parameters
Function:
Downlink
Rate
levels
could
basically
satisfy
distribution.
But
if
the
rate
and
the
call
completion
ratio.
which
should
be set
Adjustment
Level.
the
user's
throughput
levels
are too
many, it may
Adjustment
Suggestion:
according
to
requirements
Configuration
It needs
demand,
andfrequently
itRule:
can avoid
a
result
in the
Because
thethe
downlink
from
operator.If
the, the
operator
to
consider
data
waste
of
resource
radio
reconfiguration.
channel
code
isQos
limited,
more
has
no specific
throughput
demand,
resource
distribution
isthree
very
Implementation
of thethe
rate
levels
can
guarantee
the
requirement,
default
utilization
of basically
radio resource
rational.
levels
could
radiothe
resource
is more
even
parameters
should
besatisfy
used.
and
call
completion
ratio.
the
user's throughput
distribution.
But if the rate
Adjustment
Suggestion:
demand,
and
itmany,
can avoid
levels
are
too
it maya
Because
the downlink
waste
of
resource
,
the
radio
result
in the
frequently
channel
code
is limited,
more
resource
distribution
is
very
reconfiguration.
rate
levels
can
guarantee
the
rational.
Implementation
the four
radio resource isofmore
even
levels
could But
basically
distribution.
if the satisfy
rate
Function:
Switch
of CS
voice
the
user's
throughput
levels are too many,
it may
over
HSPA.
demand,
and
it
can
avoid
a
result in the frequently
Configuration
Rule:
waste
of
resource
,
the
radio
reconfiguration.
To
turn ondistribution
the function
can
resource
very
Implementation
of theisfour
improve
the basically
system volume,
rational.
levels
could
satisfy
Configuration
index
but
it also decreases
the user's
throughput the
quality
of and
voiceit services,
demand,
can avoiditais
suitable
for
high
system
waste of resource
, the radio
volume
scene.
resource
distribution
is very
Function:
Method
To
turn offDRBC
the function
can
rational.
Switch.
provide better quality of voice
Configuration
Rule: for
services, it is suitable
To
turn or
onlow
the system
function,
it can
middle
volume
realize
the
dynamic
scene.
adjustment
resource,
The functionofisradio
Controlled
by
and
it can improve
the effectis
the license.
This parameter
utilization
radio resources.
configuredofaccording
to
To
turn off
function,
it can't
whether
thethe
operator
has
realize
the dynamic
purchased
the license.
adjustment of radio resource,
and the effect utilization of
radio resources is low.
The reason of the default

value is to consider the QoS
and the system volume.
At Next Use

At Next Use

New users

New users
the different of THPThresh

value is as large as possible
for easy extension of new
THP value
The reason of the
to consider the data
throughput demand, the
utilization of radio resource
and
call of
completion
ratio.
The the
reason
the
and
call of
completion
ratio.
The the
reason
the
and
call of
completion
ratio.
The the
reason
the
and the call completion ratio.
Immediately
At next use
At next use
At next use
At next use
Configuration index
Immediately
The reason that the default

value of the parameter is on
is to try best to improve the
system capacity.
At next use

value is to make the
distribution of resources
more rational.
At next use
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
switching triggered by user

plane throughput
measurement.
Function: Switch for DL DCH
Configuration
Rule:
To turn
on
Rate Adjustment
Based
on Dthe
function, it can realize the
TCP.
dynamic
adjustment
Configuration
Rule: of E-TTI
based
on
the
user
planewhen
To turn on the function,
throughput
measurement,
the
D-TCPSwitch
is veryfor
high,
Function:
DL the
DCH
and
it can
the
system
canimprove
reduce
the system
Rate
Adjustment
Based
on Dcapacity.
downlink
rate of services
TCP.
To
turnD-TCP,
off the function,
based
and it canit can't
Configuration
Rule:
realize
the
dynamic
decrease
the
risk
of callwhen
To
turn onThe
the
function,
Function:
downlink
adjustment
of
E-TTI,
and
it
drops,
but
it
will
make
the
the
D-TCP
isthe
very
high,
the
maximum
bit
rate
threshold
can
reduce
times
of
E-TTI
user
experience
become
system
can reduce
the bad.
for
I/B service
being
reconfiguration.
To turn
offrate
the of
function,
the
downlink
services
established
CELL_FACH.
system
can'ton
reduce
the
based
D-TCP,
and
it
can
Configuration
Rule:
The
downlink
rate
of
services
decrease
the state
risk
ofiscall
CELL_FACH
mainly
Function:
The
uplink
based
D-TCP,
it make
doesn't
drops,
but
it will
the
used
for
bear
the
low
rate
maximum
bit rate
threshold
influence
the
user
user
experience
become
bad.
traffic,
it can but
save
dedicated
for
I/B service
experience,
it may
To turn
off the being
function,
the
resource.
established
CELL_FACH.
increasecan't
theon
risk
of call
system
reduce
thedropis
The
value
of this
parameter
Configuration
Rule:
The
when
the
user's
channel
downlink
rate
of
services
smaller,
traffic
is
CELL_FACH
state
mainly
quality
isthe
very
bad
.ismore
based
D-TCP,
it doesn't
difficult
to
be
established
used
for
bear
the
low
rateon
influence
the user
CELL_FACH,
and
the
user
traffic,
it can save
dedicated
experience,
it may
experience isbut
better,
but it is
resource.
Function:
Switch
forcall
DCH
increase
the
risk
of
also
easier
result
in
adropis
The
value
oftothis
parameter
Rate
Adjustment
Based
on
when
the
user's
channel
waste
of
radio
resource.
smaller,
the
traffic
is
more
Traffic
Volume
Measurement.
quality
is
very
bad
.
The
value
of this
parameter
difficult
to be
established
on is
Configuration
Rule:
Function:
HS/D->D/D
or
larger,
the
traffic
is
easier
to
CELL_FACH,
and
the user
To
turn
on the
function,
the
HS/E->D/D
Based
on
Quality
be
established
on
experience
better,
but
it isof
system
can is
adjust
rate
Measurement
Switch
for
I/B
CELL_FACH,
and
itthe
can
also
easier
to result
in
a make
services
based
on
traffic
Traffic.
best
of
common
resource,
waste
ofmeasurement,
radio resource.andbut
volume
Because
HSPA
uses
theitis
the
user
experience
is also
The
valuethe
of the
this
parameter
can
improve
effect
high-level
modulation,
its antiworse.
larger,
theratio
traffic
easier
to
utilization
ofisradio
jamming
capability
is
worse
be
established
on
resources.
than
DCH.
CELL_FACH,
and it canthe
make
To
turn
off
To
turn
on the
the function,
function,
thebut
best
of
common
resource,
system
can't
adjust
the
rate
of
Function:
HS/D->D/D
orHSPA
channel
from
the
user switching
experience
isQuality
also
services
based
on
traffic
HS/E->D/D
Based
on
to
DCH is allowed when the
worse.
volume
Measurement
S
channelmeasurement,
qualitySwitch
is bad,for
itand
can
the
effect
utilization
ratio
of
Traffic.
improve the
qualityRate
of
Function:
C Traffic
radio
resources
is
Configuration
services,
but
itRule:
also
Threshold
Used
forlow.
To
turn on the
function
can
decreases
the
system
Determining
NRT
PS Rate
improve
the
quality
of
Function:
NRT
PS Traffic
volume,Limit.
and
it may
increase
Upper
services,
butUpper
itRule:
also
Uplink
the riskRate
ratio
of
call Limit
drop.
Configuration
It needs
decreases
the
system
When
Low
Rate
C Traffic+
Toconsider
turn off the
, the
to
thefunction
quality
of
C PS
volume.
Traffic.
channel
switching
from
HSPA
and
I/B PS
services
when
To
turn off
the allowed
function
can
Configuration
Rule:
It is
need
to
DCH
is not
when
Multi-RABs.
improve
the
system
volume,
to
consider
the
quality
of
the
channel
quality
is
bad.
If the value
of this
Function:
NRT
PS parameter
Traffic C
but
it
also
decreases
and
I/B
PS
services
is
too
large,
the
rate
ofthe
PS
Downlink Rate Upperwhen
Limit
quality
of
services.
Multi-RABs.
services
willRate
be allowed
to PS
When
Low
C Traffic+
Adjustment
Suggestion:
increase to high
rate, which
Traffic.
If
the
value ofthe
thisCS
parameter
will
influence
Configuration
Rule:
Itservice's
is need
is
too
large,
the
rate
of of
PS
quality.
to
consider
the
quality
Function:
NRT
PS
TraffictoC
services
will
be
allowed
If
it
is
too
small,
the
rate
of PS
and
I/BRate
PS services
when
Uplink
Upper
Limit
increase
to
high
rate,
which
services
will
be
limited
to
a
Multi-RABs.
When
High Rate
C Traffic+
will influence
thewill
low
rate CS
low
rate,
which
influence
Adjustment
Suggestion:
PS
Traffic.quality.
service's
the
user
experience.
If
the
value
of Rule:
this parameter
Configuration
is need
If
ittoo
is too
small,
the It
rate
of PS
is
large,
the
rate
of of
PS
to
consider
the
quality
C
services
will
be
limited
to
services
willservices
be allowed
toa
and
I/B
PS
when
low
rate, which
influence
increase
to highwill
rate,
which
Multi-RABs.
the
user
experiences.
will
influence
the
low
rate CS
If
the
value
of
this
parameter
The recommended
service's
quality.
is
too large,
the
rate of
PS
configuration
should
satisfy
If
it
is
too
small,
the rate
of PS
services
will
be
allowed
to
the
condition
services
will
be
limited
to
a
increase
to high rate, which
UlPsRateLmtHighC<UlPsRat
low
rate,
which
will
influence
will
influence the high rate CS
eLmtLowC.
the
user experiences.
service's
quality.
The
If
it isrecommended
too small, the rate of PS
configuration
should
satisfy
services will be
limited
to a
the
condition
low rate, which will influence
DlPsRateLmtHighC<DlPsRat
the user experiences.
eLmtLowC.
The recommended
configuration should satisfy

is to try best to reduce the
times of E-TTI
reconfiguration.
At next use

is to try best to decrease the
risk of call drops.
At next use

risk of call drops.
At next use
The reason of the

At next use
ratio of radio resource and
the user experience.
The reason of the
At next use
At next use
effect utilization ratio of radio
resources.
value of the parameter is off
risk ratio of call drop.
The reason that the
the parameter is off is to try
best to improve the system
volume.
value of the parameter is 32K
is because 32K is a middle
value between AMR 12.2K
and CS64K.
The reason of the
to consider the quality of C
and I/B PS services when
Multi-RABs.
The reason of the
Multi-RABs.
The reason of the
Multi-RABs.
At next use
At next use
At next use
At next use
At next use
At next use
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
No
Configuration Rule: It is need

Multi-RABs.
Function:
Switch
If the value
of thisofparameter
supporting
on E-DCH.
is too large,SRB
the rate
of PS
Configuration
services will beRule:
allowed to
To
turn ontothe
function,
the
increase
high
rate, which
Function:
Quality
signalling
service
can
be
will influence the high rate CS
Measurement
for it
established
onSwitch
the E-DCH,
service's quality.
VoIP/
CS
Voice.
can
If it issave
too DCH
small,channel
the rate of PS
Configuration
resource..
services will beRule:
limited to a
Because
HSPA
uses
theonly
highTo
the function,
lowturn
rate,offwhich
will
influence
level
modulation,
its
antiwhen
the
minimal
SF
is
the user experiences.
jamming
capability
is worse
2SF2+2SF4,
the signalling
The
recommended
Function:
Initial
Rate of UL on
than
DCH.
service
can
be
established
configuration
should satisfy
DCH.
To
turn
on the function, the
the
E-DCH.
the
condition
Configuration
It needs
channel
switching
from
HSPA
The
function
isRule:
Controlled
by
DlPsRateLmtHighC<DlPsRat
to
consider
the
user
to
DCH
is
allowed
when
the is
the
license. This parameter
eLmtLowC.
experiences
andisthe
channel
quality
bad,toit can
configured
according
utilization
ratio
ofRate
radio
improve
the
quality
ofof
voice
Function:
Initial
DL
whether the
operator
has
resources.
services,
also
DCH.
purchasedbut
theit license.
The
value of
parameter
decreases
thethis
system
Configuration
Rule:
It needs is
smaller,
the
initial
UL
Function:
Switch
ofrate
6.8ofkbps
volume,
and
it may
increase
to
consider
the
user
DCH
is also
lower,
and
the
Signalling
Using
on
DCH
the risk
ratio
of call
drop.
experiences
and
the
user
experience
worse;
To
turn
on
the function
function,
offratio
,when
the
utilization
ofisradio
The
value
of
this
parameter
is
signalling
is
carried
on
DCH
channel switching from HSPA
resources.
larger,
the
initial
rate
of
UL
during
RRC
connection
to
DCH
is
not
allowed
when
The value of this parameter is
DCH
is, or
also
higher,
and
the
setup
when
RB
has
the
channel
quality
is
bad.
smaller,
the
initial
rate
ofbeen
DL
user
is better,
setup
only
signalling
isand
DCH experience
isand
also
lower,
and the
itcarried
is
also
easier
to
result
in
a
on DPCHisalone,
user experience
worse;it can
waste
of
radio
resource
and
substitute
3.4
kbps
signalling
the
increase
of system
load.
by
6.8
kbps
signalling
larger,
the initial
rate ofand
DL it
can
speed
the
signalling
DCH is also higher, and the
process,
but it willis also
user experience
better, and
occupy
power
resource.
itFunction:
is alsomore
easier
to
result
in a
Switch of PS
To
turnofoff
the function,
when
waste
radio
resource
andfor
Service
Channel
Allocation
signalling
is CS+PS.
carried
on DCH
the increase
of system
load.
Concurrent
during
RRC
connection
Configuration Rule: If the CS
setup
, orratio
when
been
call
drop
is RB
highhas
when
Function:
Online-already
setup
and
only
signalling
concurrent
CS+PS, the is
Service
Reconfiguration
carried
on
DPCH
parameter
bealone,
set to it'On',
Method
for can
UE of
6
can'tit substitute
3.4Release
kbps
but
may
influence
the
user
and
after
Release
6
When
signalling
by 6.8 kbps
experience.
Multi-RAB.
signalling.
Function:
ThisRule:
parameter
Configuration
If there is
indicates
whether
the RNC
no compatibility problem
with
supports
DPI
QoS
Function:
Thisbased
parameter
UE, it is recommended
to be
algorithm
or not.
indicates
whether
to perform
"0: RB setup
method",
it can
The
related
factor:
The for
different
DRBC
strategies
reduce the
reconfiguration
requirement
differentiation
different
services
control
messages
onfor
UU
interface.
of
application
services.
according
to the
service type
The
moreidentified.
detailed application
that DPI
service
information
is be set
This parameter
should
achieved
by
RNC
with
DPI
according to whether operator
function.
By
this
way,
the
network buy the license.
different QoS strategies may
be
executed
different
Function:
NottoQchat
RB2
application
in terms
Whether
to services
be Released
of
application
service
Function:
Event
Counter
Indicator
When
It4B0
is no
Traffic
characteristics
to get
the of
Threshold
Release
Volume. for the
better
networkRule:
performance.
Non-Qchat-RB2
PS ItService
,
Configuration
is
Besides,
the
multi-stream
Shared
by
Uplink
and
recommended to be "1: True",
schedule
algorithm
is
Downlink.
it can increase
the number
of
implemented.
With
it, the
The
value of
this
parameter
multi-RAB
and
reduce
the is
different
data
streams
smaller,
the
release
of within
Nontime delay
on
UU interface.
one RAB willPS
beservice
scheduled
Qchat-RB2
is
according
to theitapplication
more
fast when
have no
servicevolume;
type priority.
traffic
larger, the release of NonQchat-RB2 PS service is
more slow .
The parameter is mainly used
for the release ofQchat RB1.
The reason of the

Multi-RABs.
At next use
This parameter is configured

according to whether the
At next use
operator has purchased the
license.
quality of voice services.
The reason of the
The reason of the
At next use
At next use
At next use
The reason of the

ratio of radio resource.
At next use
The reason of the

experience.
Immediately
The reason of the

to consider the compatibility
problem with UE.
At next use

according to whether
At next use
operator network buy the
license.
DPI based QoS algorithm is
a value-added. It could be
opened according to
requirement of operators.
At next use
The reason of the

At next use
to consider the number of
multi-RAB and the time delay
on UU interface.
The reason of the
At next use
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Function: ps handover
It
is related
with the NACC
support
indicator
function.if license
supported
Configuration
Rule:
service
NACC
function
RNC
continuity,
user and
experience,
support
NACC
this
parameter
GSM
equipment
capability
Function:
DTM
is
configured
1, support
else
0.
If
the
parameter
is
"On",
indicator
When
UE withRule:
PS service
Configuration
service
moves to inter-RAT
adjacent
continuity,
user experience,
cells,
service capability
handover to
GSM PS
equipment
inter-RAT
cell
,
which
If the parameter is "On",
guarantees
service
continuity
When UE with
CS and
PS
and
improve
user
experience.
service simultaneously moves
If
parameter
is "Off",
PS
tothe
inter-RAT
adjacent
cells,
service
interrupted
CS
and will
PS be
service
handover
when
UE handover
to
to inter-RAT
cell in parallel
via
GERAN
via
cell
reselection
DTM mechanism, which
procedure.
Function:
This
parameter
guarantees
service
continuity
indicates
if
RNC
and improve usersupports
experience.
WB-AMR
Speech
If the parameter
is "Off", PS
Function:
parameter
Configuration:
If
RNC
service willThis
be interrupted
indicates
ifhandover
RNC supports
supports
thetovaluePS
when UE WAMR,
Conversational
RAB
for VoIP
should
be
set
to
"Support"
GERAN via cell reselection
Configuration:
If
RNC
procedure.
supports PS Conversational
Function:
Thisand
parameter
RAB for VoIP
this
indicates
RNC the
supports
function isif paid,
value PS
Signalling
IMS
should be RAB
set tofor
"Support"
Configuration:
If RNC
PS domain VOIP
service will
supports
PS
Signalling
RAB
be supported if the parameter
for
IMS
and
this
function
is
is
set
to
"Supported".
Function:
service
handover
Function:
This
parameter
paid,
the
value
should
be
indicator whether HSDPAset
indicates
HSto "Support"
Related
factor:
DPCCH
ACK/NACK
Ps
domain
IMS is
signalling
The
parameter
"ON" to by
enhancement
is
supported
service
will
be
supported
if
control
service
allocation
RNC.
For R6 version
andin
the
parameter
is
set
to
UMTS
orHARQ
GSM. preamble
For example,
beyond,
is
"Supported".
AMR
is
in
GSM
and
PS data
added when ACK/NACK
is
service
is in UMTS.
sent
in uplink,
mode 1 means
If
the parameter
is "Off", is
ACK/NACK
enhancement
service
handover
strategy
used, so as to increase
the
doesn't
perform.
Function:
neighboring
reception accuracy of cell
monitoring
ACK/NACK.switch
Only when this
Configuration
Rule:
parameter is set
as
If
the parameter
"On",1 RNC
'Supported',
can is
mode
be
will
monitor neighboring cell,
configured.
which
will guarantee
mobility
Configuration
Rule: This
continuity
avoid
parameterand
is configured
unnecessary
interference,
according Used
to whether
the
Function:
for indicating
thereby
decrease
callcan
drop
operator 2SF2+2SF4
has purchased
the
whether
be
rate.
HSDPA
HS-DPCCH
used by UE.
If
the parameter
is "Off",
ACK/NACK
enhancement
Configuration
Rule:
This RNC
will
not monitor
neighboring
license.
parameter
is configured
cell.
It
is related with
the
2SF2+2SF4
license.
positioning function, and is
used in LCS method choice.
It is configured according to
RNC supporting lcs
accurancy.
It is related with the
used in LCS method choice.
RNC supporting lcs
accurancy.
In case that license support,

NACC helps UE reselect to
2G system.
At next use (i.e.,

shall not affect
ongoing
connections)
User experience is
default value.
At next use
User experience is
default value.
At next use
N/A
Take effect for the

next call
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC

At next use
deployment.
HSDPA HS-DPCCH
ACK/NACK enhancement
license is closed by default,
and will be opened when the
license.
At next judgment
(i.e., shall not
affect ongoing
connections)

At next use
planning.
This parameter is configured
2SF2+2SF4 license.
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
Yes
Yes
Yes
NO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
of cells for allowed for access

or handover according to
IMSI of UE
Configuration Rule:
Function
of this
parameter:
If handover
based
on IMSI it
indicates
if
MBMS
PTP
shall be expected, the
Service
canisbe
Beared
parameter
"On",
and on
some
HSDPA,
so that
increase
UEs will not
allowed
to the
rate
of MBMS
services.
access
or Inter-RAT
handover
to
Function:
handover
Factors
ofGSM
consideration:
the
unauthorized
cells
according
based
on
load
rate
of
MBMS
services
to IMSI of UE,Rule:
which may
Configuration
If
the
turn
on
this
lead
increase
call
rejection
If
thetooperator
parameter
is "On"
to
function,
the
MBMS
Service
rate
and
handover
failure
provide
handover
more
Main
function:
This
parameter
in
PTP
can
be
Beared
rate.
efficient.
As
UMTS
canon fast
indicates
if
RNC
supports
HSDPA,
so load
that itis
increase
If
the parameter
"Off", UE
acquire
the
condition
in
reconfiguration
function.
the
of MBMS
can rate
access
or handover
to
GSM,
inter-RAT
handover
services.Otherwise
any
cell.
based
on factor:
GSM loadthe
is taken
Influence
MBMS
PTP
Service
in
PTPto
into
consideration
in
order
If
the function
is turned
on, it
cannot
be
beared
on
HSDPA,
avoid
access
failure
in GSM
may
lower
the
timer
of
the
rate will
be limited.
because
of overload
in GSM
reconfiguration
procedure,
If the MBMS is not
used,UE
this
system.Simultaneously,
and
reduce
the
interruption
Function:
AMR
interparameter
is invalid
call
drop
may
be
happened
timer
of reconfiguration
frequency
switch
due
to limithandover
of handover
to the
procedure,
that
may bring
Related
factor:
GSM.
user
better feeling.
However,
The
parameter
isis"ON"
If
the
parameter
"Off",to
the
function
maycontinuity
consumpt
provide
service
access
failure inscrambling
GSM mayand
be
more
downlink
better
quality
of
service.
happened
due
to
overload
of
code.
Function:
AMR inter-rat
In
Multi-carriers
scenario, if
GMS.
If
the inter-frequency
function
is turned off, it
handover
switch
AMR
may
raise
the
timer
of
Related
factor:
handover
is
not
expected,
the
reconfiguration
procedure,
The
parameter
is
"ON"
to
parameter is "Off" to simplify
and raise
the strategy,
interruption
provide
service
continuity and
multi-carriers
Function:
R99
intertimer
ofquality
reconfiguration
better
ofNRT
service.
decrease
opportunity
of
frequency
handover
switch
procedure,
that
may
bringifthe
In
Multi-system
scenario,
compressed
mode
activation
Related
factor:
user
worse
feeling.
AMR
inter-rat
handover
and reduce
influence
onis not
The
parameter
is
"ON"
tois
expected,
the
parameter
system capacity.
provide
service continuity
and
"Off" to simplify
multi-carriers
better
quality
of
service.
strategy, decrease
Function:
R99 RT interIn
Multi-carriers
scenario,
opportunity
of compressed
frequency
handover
switchif
R99
NRT
inter-frequency
mode
activation
and
reduce
Related factor:
handover
is
not
expected,
influence
on
system
capacity.
The parameter is "ON" to the
parameter
is "Off"
to simplify
provide
service
continuity
and
multi-carriers
strategy,
better quality of
service.
decrease
opportunity
of if
Function:
R99
NRT
inter-rat
In Multi-carriers
scenario,
compressed
mode
activation
handover
switch
R99 RT inter-frequency
and
reduce
on the
Related
factor:
handover
is influence
not expected,
system
capacity.
The
parameter
is
"ON"
to
parameter is "Off" to simplify
provide
service
continuity and
multi-carriers
strategy,
better
quality
ofRT
service.
decrease
opportunity
of
Function:
R99
inter-rat
In
Multi-system
scenario,
if
compressed
mode
activation
handover
switch
R99
NRTfactor:
inter-rat
handover
is
and reduce
influence
on
Related
not
expected,
the
parameter
system
capacity.is "ON" to
The
parameter
is
"Off" to
simplify
multi- and
provide
service
continuity
carriers
strategy,
decrease
Function:
HSDPA
interbetter quality of service.
opportunity
of compressed
frequency
handover
switch
In Multi-system
scenario,
if
mode
activation
reduceis
Related
factor: and
R99 RT
inter-rat
handover
influence
on system
capacity.
The
parameter
is "ON"
to
not expected,
the
parameter
provide
service
continuity
is "Off" to simplify multi- and
better
of service.
carriersquality
strategy,
decrease
Function:
HSDPA
inter-rat if
In
Multi-carriers
scenario,
opportunity of compressed
handover
switch and reduce
HSDPA
inter-frequency
mode activation
Related
handover
is not
expected,
the
influencefactor:
on
system
capacity.
The
parameter
is "ON"
to
parameter
is "Off"
to simplify
provide
service
continuity and
multi-carriers
strategy,
better
quality
of service.
decrease
opportunity
of
In
Multi-system
scenario,
if
compressed
mode
activation
HSDPA
inter-rat
handover
and reduce influence on is
not
expected,
the parameter
system
capacity.
is "Off" to simplify multicarriers strategy, decrease
opportunity of compressed
mode activation and reduce
influence on system capacity.
The feature is not used in

general.
At next use
N/A
Immediately
User experience is
default value.
At next use

considering to bring the user New connection
better feeling.
default value.
At next use
default value.
At next use
default value.
At next use
default value.
At next use
default value.
At next use
default value.
At next use
default value.
At next use
default value.
At next use
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Function: HSUPA interfrequency handover switch

Related factor:
The parameter is "ON" to
provide service continuity and
better quality of service.
Function:
HSUPA
inter-rat if
In Multi-carriers
scenario,
handover
switch
HSUPA inter-frequency
Related
handoverfactor:
is not expected, the
The
parameter
is "ON"
to
parameter
is "Off"
to simplify
provide
service
continuity and
multi-carriers
strategy,
better
quality
of service.
decrease
opportunity
of
In
Multi-system
scenario,
if
compressed
mode
activation
HSUPA
inter-rat
handover
and reduce
influence
on is
not
expected,
the parameter
system
capacity.
Function:
RT multiInter Rat
is "Off" to R99
simplify
(EUTRAN)
Handover
Switch
carriers strategy, decrease
Related
factor:
the
actual
opportunity of compressednet
planning
mode activation and reduce
This
parameter
indicates
influence
on system
capacity.
whether R99
inter-Rat
Function:
R99RT
NRT
Inter Rat
handover
EUTRANSwitch
allowed
(EUTRAN)toHandover
or
not.
Related factor: the actual net
planning
Function:
Interallowed
Rat
handover HSDPA
to EUTRAN
(EUTRAN)
Handover Switch
or not.
Related factor: the actual net
Parameter
planning Function: Dynamic
Update
PO2 Switch.
This parameter
indicates
Configuration
Rule:
It needs
Function:
HSUPA
Inter
Rat
whether HSDPA
inter-Rat
to
consider
the
system
(EUTRAN)
Handover
Switch
handover to EUTRAN allowed
capacity
and thethe
bandwidth
Related
actual netof
or not. factor:
Iub
interface.
planning
Turn
on this switch,
system
This parameter
indicates
capacity
can
be
optimized,
but
it needs
add a allowed
handover
to to
EUTRAN
additional
Iub control FP
or not.
(RADIO INTERFACE
PARAMETER UPDATE) .
Turn on this switch, DPCH
TPC domain might waste
power,
but itfunction:
doesn't the
need to
Parameter
add
a
additional
Iub
control
switch of the SCUDIF (video
FP
call (RADIO
fall back)INTERFACE
function.
PARAMETER
UPDATE)
.
Parameter
The
Parameter function:
controlling
factor:
Adjustment
Suggestion:
parameter
is
the
switch
of
the function on or off.
This function
can be turned
dedicated
priority.
on when
the capacity
Rule:
According
to theof the
Parameter
function:
network
cell is limited
byoperator.
downlink
requirement
of
power.
When operators expect UE
parameter.
could campthe
on switch
some of the
specific
info
acquisition
frequency
when
it leaves
function
in thethey
CDT.
CELL_DCH,
can use this
Parameter
function. controlling factor:
Parameter
network
function on function:
or off, RNC
system performance.
parameter.
theturns
switch
If the function
on,ofitthe
specific
info
acquisition
influences the RNC system
function
in thebecause
CDT. of
performance
Parameter
controlling
factor:
analyzing
NAS
coding
Parameter function:
network
function
on
or
off,
RNC
stream.
system performance.
parameter.
the switch of the
If
the function
turns on, it
specific
info acquisition
influences
the
function in the RAN
CDT. system
performance
because
of
collecting
NodeB
statistic
function on or off, RNC info.
system performance.
If the function turns on, it
influences the RNC system
performance because of
logging signalling stream.
default value.
At next use
default value.
At next use

default value.
Immediately

default value.
Immediately

default value.
Immediately

default value.
Immediately
Turn off this switch mainly

consider the bandwidth of Iub Immediately
interface.
N/A
At Commit/New
users

Immediately
of operator
requirements.
requirements.
requirements.
At Commit/New
users
At Commit/New
users
At Commit/New
users
No
Yes
Yes
No
Yes
N/A
Yes
N/A
N/A
Yes
No
No
handover timer after inter-rat

handover failure
Configuration Rule: system
resource, drop call rate and
handover success rate
After inter-rat handover is
failure, if the parameter is
larger, next handover interval
Parameter
Function:
Switch
is longer, which
may increase
of
whether
to
Punish
thetoUE
call-drop possibility due
that
can't
Camp
on PCH
quality
getting
bad.
state.
If the parameter is smaller,
next handover interval is
This
parameter
indicates
Parameter
function:
network
shorter
and
handover
attempt
Function:
Switch
of Whether
whether
to
punish
the UE
is more
frequent,
which
willthat
to
transfer
from HSDSCH
to
can't
camp
on
PCH
state;
The
parameter.
CDT
record
occupy
system
DCH
formore
R5 UE's
"PS Setup
recommended
value
is
"on",
it
number
threshold
per
RRC
resource.
before CS" Concurrent
can
avoid
the
ping-pong.
connection.
Service.
Parameter
controlling
factor:
Configuration
Rule:
The
Function: Switch
of HSaverage
RAB number
recommended
value
isper
"0 : off
DSCH/E-DCH
or
HS-DSCH/
RRC
connection,
to
", it can
reduce thewhether
call
drop
DCH
to DCH/DCH,
Used
for
record
all
RAB
or
not,
CDT
becauseScene.
of the
CS+PS
data
volume
for
RNC
RNC
Function:
Event
4B0To
Counter
reconfiguration.
Configuration
Rule:
turn on
system.
Threshold
for
HS-DSCH
the function, it can realizetothe
Value
N means
a RRC
DCH,
Used
for CS+PS
channel
switch
of
HS to DCH
connection
willtraffic
log Nvolume
CDT
Scene.
based
on the
record
at most.Rule:
Configuration
needs
measurement,
and itItcan
Value
1 means
a RRC
to
consider
theHS-DSCH
user
decrease
the
connection
will
logthe
only
one
experiences
and
HSServe Cell Change
process
Function:
The
DCH
Rate
CDT
record,
multi
CDT
record
DSCH
Serve
CELL
Change
influence on CS call drop,ofbut
PS
Reconfigured,
Used
is
not
supported,
and
thefor
process
influence
on
cs
call
it will
also
may influence
the
CS+PS
Scene.
RABuser
infoexperience.
may be lost.
drop
ratio.
PS
Configuration
Rule:
It needs
Value
255
means
a RRC
The
value
parameter
is
To turn
off of
thethis
function,
it can't
to
consider
the
user
connection
will
log
all
the
larger,
will
be more
difficult
Function:
Switch
of switch
the
PSof
realize itthe
channel
experiences
and
the
RAB
to
thebased
HS-DSCH
Service
Channel
allocation,
HStrigger
toinfo.
DCH
on theto
utilization
ratio
of
radio
DCH,
and
it
can't
decrease
Used
for
UE
in
the
traffic volume measurement,
resources.
the
Serve
CELL
CELL_FACH/PCH
State
andHS-DSCH
it can't decrease
the HSThe
value
of
this
parameter
Change
process
influence
onis
Triggering
CS
Call.
DSCH
Serve
Cell
Change
Function:
Delay
time
smaller,
the
DCH
rate
of
PS
cs
call drop
Configuration
Rule:onToCS
turn
process
influence
callon
threshold
of ratio;
D/D->HS/D
or
reconfigured
is also
lower,
The
value
of
this
parameter
the
function,
when
the
UE
drop.
HS/E
after
HS/D
or HS/Eisinis
and
the
user
experience
smaller,
it
will
be
easier
to
the CELL_FACH
state
trigger
->D/D
triggering by
channel
worse;
trigger
the
HS-DSCH
to
DCH,
CS
Call,
the
PS
service
will
quality.
The
value
of easier
this parameter
is
but
it
is
also
to
result
in
be
beard
on
DCH
not
HS,
Configuration
Rule:
Itofneeds
larger,
the
DCH
rate
PS
ping-pong
reconfiguration
and
it can decrease
the HSto
consider
the
user higher,
reconfigured
is
also
because
of
the
throughput
DSCH
Serve
Cell
Change
experiences
and
the ratioisof
and
the user
experience
fluctuation.
process
influence
on CS call
call
drops.
better,
andit will
it is also
also may
easier to
drop,value
but
The
of
this
parameter
is
result in athe
waste
of
radio
influence
PS
user
off,
it
will
be
easier
to
trigger
resource
and the increase of
experience.
HS/D
orload.
HS/E->D/D based on
system
To
turnvolume
off the measurement
function, ,
traffic
when
the
UE
in
the
after HS/D or HS/E->D/D,
but
CELL_FACH
state
CS
it also will be easiertrigger
to result
Call,
the PS service
will be
in
ping-pong
adjustment;
And
beard
on HS, , and will
the HSthe reconfiguration
DSCH
Serve
Cell
This
parameter
indicates
increase
the risk
ofChange
call drops.
process
will
influence
CSincallis
Object
ID
and
is
unique
The value of this parameter
drop.
father
Object
.
on, it will be more difficult to
trigger HS/D or HS/E->D/D
based on traffic volume
measurement after HS/D or
This
parameter
HS/E->D/D,
andindicates
influence
reference
to
UIurLink object.
user experiences.
Parameter is valid only when
relative value is included in
TbType field of
UTbType/UTbType table
System resource, drop call

rate and handover success
At next use
rate are considered to define
this default value.
It can avoid the ping-pong.
at next use
The recommended value is

"0 : off ", it can reduce the
call drop because of the
reconfiguration.
at next use
The default value is 255 to

log all the RAB info for a
RRC connection.
At Commit/New
users

value of the parameter is to
try best to guarantee the PS
user experience.
The reason of the
experiences and the HSDSCH Serve CELL Change
process influence on cs call
drop
ratio. of the
The reason
Next Use
Next Use
Next Use

try best to guarantee the PS
user experience.
Next Use
The reason of the

experiences.
At next use
Basic parameter
Cann't Modify
N/A
At next use
N/A
New Session
No
when directly mapping

transmission layer Qos
parameter from upper layer
service type is required, this
parameter should be
configured
N/A
New Session
N/A

QOS
Function
ObjectThis
ID
Parameter
Function:
N/A
can not be
modified
N/A
can not be
modified
No
No
No
No
No
No
No
No
No
No

power offset between the
DPCH
maximumindicates
downlinkthe
This parameter
power
for
the
traffic
class of
Qos Basic Configuration
different
basic
priority.
Parameter
Object
ID Function: This
Configuration
Rule: Itthe
needs
parameter indicates
to
consider
the
system
power
offset between
the the
This
parameter
indicates
capacity
and service
quality.
DPCH
maximum
uplink
power
Basic
Priority used
for Basic
If
this
parameter
is of
too
big,
for
the
traffic
class
different
Priority
indentification
of
the
actual
maximum downlink
basic
priority.
parameter
related
to
Basic
power
would be
too Itbig,
and it
Configuration
Rule:
needs
Priority,
can the
not
adjustable
might
affect
system
to consider the system
capacity.
capacity and service quality.
If this
this parameter
parameter is
is too
too big,
small,
If
the
the actual
actual maximum
maximum downlink
uplink
power
power would
would be
be too
too small,
big, and it
and
it
might
affect
the service
quality.
capacity.
Adjustment
Suggestion:
If this parameter
is too small,
The
parameter
valueuplink
is
the actual
maximum
configured
based
on
the
power
would
be too small,
Function:
equivalent
HSPA
system
demand
onthe
whether
and
it
might
affect
service
users.
different
basic
priority
users
quality.
Function:
This
parameter
Related
factor:
Basicmaximum
Priority
need
have
different
Adjustment
Suggestion:
indicates
the
nominal
bit rate
The
greater
this
parameter
is,
downlink
power.value
If there
is no
The
parameter
is will
for
uplink
the
more
load
resource
be
need
to
configure
different
configured
based
on the
considerate
to
be
occupied.
maximum
downlink
power
system
demand
on whether
services
on
DCH.
RNC
will
chose
cell
of largest
based
on
different
basic
different
basic
priority
users
Related
Factor:
BP related
remained
load
resource
to be
Function:
This
parameter
priority,
the different
parameter
can
need
have
maximum
data
throughput,
user
access.
indicates
the
nominal
bit
rate
configured
with
the value
uplink
power.
If there
is no0.
experience.
for downlink
need
configurevalue
different
If
the to
parameter
related
maximum
uplink
power
based
to BP is larger,
BP related
services
on DCH
on
different
basic
priority,
the
data
throughput
and
the
user
Related Factor: BP related
parameter
can
be
configured
experience
will
improved.
Function:
This parameter
data throughput,
user
with
value
0. valuebit
If
thethe
parameter
related
indicates
the nominal
rate
experience
to
BP
is
smaller,
BP
related
for
If the parameter value related
data
and
the user
services
on HS-DSCH
to BPthroughput
is larger,
BP
related
experience
will be
affected.
Related
Factor:
BP
related
data
throughput
and
the user
data
throughput,
user
experience
will
be
improved.
experience
If the parameter
valuebit
related
indicates
the nominal
rate
If
parameter
related
tothe
BP
is smaller, value
BP related
for
to
BPthroughput
is larger,
BP
related
data
and
the user
services
on E-DCH
data
throughput
and
the user
experience
will be
Related
Factor:
BPaffected.
related
experience
will
be
improved.
data throughput, user
If the parameter value related
experience
to
BP parameter
is smaller, value
BP related
If the
related
data
throughput
and
the user
to BP is larger, BP related
experience
will be
affected.
data throughput
and
the user
experience will be improved.
If theparameter
parameterindicates
value related
This
the
to
BP is
smaller,
BP related
Basic
Priority
Mapping
data
throughput
andID
the user
Relationship
Object
experience will be affected.
Basic Priority Identifier; the

can not be
value between 0~15 must be
modified
configured
The value 0 means there is
no need to configure different
maximum downlink power
based on different basic
priority.
The value 0 means there is
no need to configure different
maximum uplink power
based on different basic
priority.
balance distribution among
carriers and scenario are
default value.
Ongoing
connection
Ongoing
connection
Immediately
The BP related data

throughput and the user
Immediately
experience are considered to
define this default value.
The BP related data
Immediately
The BP related data
Immediately
The BP related data
Immediately
N/A
can not be
modified
No
No
No
No
No
No
No
No
No
No
No
No
The function of this

parameter: This parameter
indicates the Basic Priority,
which is mapped from ARP,
This
parameter
the in RAB
Traffic
Class andisTHP
segment of
ASSIGNMENT
REQUEST;
Allocation/Retention
It's
used for mappingPriority
(ARP) usedPriority,
in the mapping of
Application
Basic Priority,
and isAccess
not
Scheduling
Priority,
adjustable.
Control Priority, etc in RRM.
The
factor
fortraffic
setting
This involved
parameter
is the
this
thereof
classparameter:
used in theWhen
mapping
are
users
with and
different
Basic
Priority,
is notARP,
Traffic
Class
and
THP,
how to
adjustable.
allocate radio resource using
priority.
Influence of this parameter:
The higher of Basic Priority,
the more probability to
guarantee the Qos; The lower
of Basic Priority, the lower of
the
resource
using the
Thisradio
parameter
indicates
priority;
Scheduling
Priority Mapping
Suggestion
setting
this ID
Relationshipfor
Profile
Object
parameter: The principle to
The
function
this
configure
thisofparameter
is
parameter:
This
is
that the higher ofparameter
the ARP, the
the
Basic
Priority
used
in
the
higher of the basic priority;
Scheduling
Priority
index
mapping
of of
Scheduling
The higher
the TrafficClass
Priority
(SP
is
mapped
(C>S>I>B) , the higher from
of the
BP
and
BearType)
, and
basic
priority.
So that
theis not
The
function of this
adjustable.
higher of the basic priority, the
parameter:
This
parameter
is
The
involved
factor
for setting
This
parameter
indicates
the
higher
QoS priority
that
the
the
radio
bearer
type
used
in
this
parameter:
Scheduling
The
function
of this
Scheduling
Priority
users
can enjoy
andMapping
be
mapping
of SP
Scheduling
Priority
(SP
ofObject
different
parameter:
(Scheduling
Relationship
ID BP
guaranteed.
Priority
(SP
is mapped
from
users;
requirement.
Priority)Operator
mapped
from BP
and
BP
and
BearType)
,
and
is not
Influence
of
this
parameter:
BearerType, used for
adjustable.
This parameter
is the users
Basic
selecting
pre-empted
The
involved
factor
for setting
Priority
usedresource
in
the mapping
when
radio
this
parameter:
Scheduling
of Scheduling
Priority
congestion
occurred
or(SP is
Priority
(SP
of
different
BP
mapped from
BP in
and
scheduling
users
access
users;
Operator
requirement.
BearType)
,
and
is
not
refused queue to attempt
Influence
this
parameter:
adjustable.
accessingofthe
cell.
This
parameter
is the
Suggestion
for
setting
this
The
involved
factor
forBasic
setting
Priority
usedThis
in the
mapping
parameter:
parameter
is
this
parameter:
SP
of different
of
Priority
(SP
is
theScheduling
Basic
Priority
used
in the
BP
and
BearerType
Users;
mapped
BP and
mapping from
ofrequirement
Scheduling
operator's
BearType)
,
and
is not from
Priority
(SP
is
mapped
Influence of this
parameter:
adjustable.
BP
and
BearType)
, and is not
SP (Scheduling Priority)
Suggestion
for
setting
adjustable.If
the
operator
mapped
from
BP
and thishas
parameter:
Qos
Parameters
no specific Qos
BearerType;
therequirement,
higher of SP,
which
should
be
setshould
default
parameters
the
higher
probability
beingbe
according
to
requirements
used.
scheduled
and the higher
from
operator.It's
not the less
access
successindicates
rate;
This
parameter
adjustable.If
theprobability
operator the
has
of
SP,
the
less
Application
Priority
Mapping
no
specific
Qos
requirement,
being
scheduled
and
the
less
Relationship
Profileshould
Object be
ID
default
access parameters
success rate;
used.
parameter: Qos Parameters
This
the
whichparameter
should beisset
Application
Priority
according
to requirements
The parameter
is used to
configuration
index.
from
operator.It's
identify the Scenenot
of the
adjustable.If
the operator
has
application priority.
the value
no
specific
Qos
requirement,
of "0" is to identify that the
default
parameters
should
application
priority are
usedbe
used.
for load control algorithm. the
value of "1" is to identify that
the application priority are
used for congestion control
algorithm.
For
BP, all the
It's amapping
Qos parameter
and
combination
ARP PL valid
should
be setofaccording
to
value,
TrafficClass
valid value
the operator's
requirement.
must
be set,value
and isisnot
The default
come
adjustable.
from CSL's requirement in
It's
parameter
and
HK.aIfQos
the operator
has
no
should
be
set
according
specific Qos requirement,tothe
the
operator's
requirement.
default
value can
be used in
The
default
value setting
ordinary
network.
rules:
the higher
of ARPSeg
TrafficClsss
for mapping
BP
with
same
traffic
class,
the
(Basic Priority). For
mapping
higher
of BP;
the higherof
BP, all the
combination
priority
of
traffic
class (C>S>I
ARPSeg valid value,
(the
less of THP
TrafficClass
validvalue,
value the
must
higher
THP
priority)>B)
be set, of
and
is not
adjustable.
with same ARPSeg, the
higher of BP.If the operator
has no specific Qos
N/A
requirement, the default
value can suit the ordinary
qos requirement.
Immediately
Immediately
Immediately
can not be
modified
cell index of Scheduling

priority, one set of setting is
provided in the default
parameters.
Immediately
N/A
can not be
modified
It's a Qos parameter and

should
be set (BP).
according
Basic Priority
For to
the
operator's
requirement.
mapping SP (Scheduling
The
default
value
setting
Priority),
all the
combination
rules:
the
higher
of
of The BearerType ARPSeg
valid
with
same
trafficvalue
class,
the be
value,
BP valid
must
higher
of
BP;
the
higher
radioand
bearer
type
(DCH,
set,
is not
adjustable.
priority
traffic class
HSPA orofMBMS).
For (C>S>I
(the
less
of
THP
value,
the
mapping Scheduling Priority,
higher
of THP priority)>B)
all the combination
of The
with
same ARPSeg,
the BP
BearerType
valid value,
higher
of BP.If
thebeoperator
valid value
must
set, and
has
specific Qos
is notnoadjustable.
qos requirement.
the operator's requirement.
The default value setting
N/A
rules: the higher priority of
BearerType (MBMS > HSPA
> DCH) with same BP value,
the higher of AP; the higher
It's
Priority, two
BP Application
with same BearerType,
sets
of
parameters
are set
the higher of AP.If the
(one
for
congestion
Control
operator has no specific
Qos
and
one
for
overload
control)
qos requirement.
Basic identify parameter
Immediately
Immediately
Immediately
can not be
modified
Immediately
Cann't Modify
No

N/A
The function of this

parameter:
Thisisparameter
This parameter
the Basic
indicates
the
Application
Priority used in
the mapping
Priority,
which Priority,
is mapped
of Application
andfrom
is
BPSeg,
BearType,
Direction
not adjustable.
(DL or UL) and RateSeg; It's
used in Overload Control and
This
parameter
is the
Congestion
Control
forradio
bearer
type
used
in
selecting users whenthe
cell load
mapping
is high. of Application
Priority,
and isfactor
not adjustable.
The involved
for setting
this
parameter:
When
This parameter is the there
are
usersof
with
segment
thedifferent
Basic Priority
BPSeg,
BearType,
and
used in the mapping
of
RateSeg
in
high
load
cell,
Application
Priority,
and
is not
Function:
This
parameter
which
class
of
users
will
be
adjustable.
indicates
thedowngrade
rate class Qos.
which
selected to
is
used to of
map
priority
Influence
thisbasic
parameter:
of service.
This
This
parameter
is not
be
Application
Priority
mapped
adjusted
but
used
to
from BearType (the AP of
determine
the basic
priorities
MBMS is highest,
then
the AP
corresponding
to
each
value
of HSPA, the AP of DCH
is
of
theit.lowest) , BPSeg (the
higher the basic priority the
higher the application priority)
, Direction (DL or UL) and
RateSeg (the higher the rate,
the
the priority)
; The
Thislower
parameter
indicates
higher
Object of
IDthe
andapplication
is unique in
priority,
the lower
father Object
. of the
possibility to be selected as
the decreasing load object,
and the higher QoS
guaranteed;
lower of the
Basic
PriorityThe
Transport
application
priority, the higher
Bearer TypeIndex
of the possibility to be
selected as the decreasing
Function:
This
parameter
load object,
and
the less QoS
indicates
transmission Mode
guaranteed.
Configuration
According
Suggestion forRule:
setting
this
to
actual requirement
of the
parameter:
Qos Parameters
operator.
which should be set
according to requirements
from parameter
operator.If indicates
the operator
This
has no ID
specific
Object
and isQos
unique in
requirement,
father
Object the
. default value
can be used in ordinary
network.
BP. For mapping Application

Priority, all the combination of
The BearerType valid value,
BP value, direction (UL or
DL)
value
and
RateSeg
radiovalid
bearer
type
(DCH,
valid
value
must
be
set, and
HSPA or MBMS). For
is
not
adjustable.
mapping Application Priority,
all the combination of The
BearerType valid value,
BPSeg valid value, direction
BPSeg
(BPvalid
Segment).
For
(UL or DL)
value and
mapping
Application
Priority,
RateSeg valid value must be
all
combination
of The
set,the
and
is not adjustable.
BearerType valid value,
BPSeg valid value, direction
(UL or DL) valid value and
RateSeg valid value must be
It's
Qosisparameter
and
set,aand
not adjustable.
the
N/Aoperator's requirement.
The default value setting
rules: it is set based on the
condition of 5 BP segment
setting; the higher of BP with
same BearerType, the higher
of AP; the higher priority of
Bearer Type (MBMS > HSPA
> DCH) with same BP, the
higher of AP.If the operator
has no specific Qos
Basic
parameter
requirement,
the default
qos requirement.
No
No
No
No
No
No
No
Yes
No
Yes
Yes
can not be
modified
Immediately
Immediately
Immediately
Immediately
Immediately
Cann't Modify
N/A
Cann't Modify
N/A
Cann't Modify
Basic parameter
Cann't Modify
Basic Priority Segment
N/A
Cann't Modify
Invalid for MBMS NE
N/A
Cann't Modify
For dual stack scenario (The

IubSrvBrsType field value of
R_NeInfo is set as
DBS_BRSTYPE_IPANDATM)
, the TbType value
DBS_TBEARERTYPE_ATM
and
DBS_TBEARERTYPE_IP
N/A
means "ATM Bear Type will
be first selected" and "IP Bear
Type will be first selected",
which means even the
TbType is set as
DSCP
for IP
N/A
DBS_TBEARERTYPE_ATM,
valid IpDscp should also be
configured.
Cann't Modify
No

for I/B Traffic
N/A
New Session
No
Downlink Reserved
Bandwidth for I/B Traffic
N/A
New Session
Yes

Object ID and is unique in
father Object .
Basic parameter
Cann't Modify
No
Transport Qos Profile

parameter Index
N/A
Cann't Modify
No
Initial Transport Network

Scene
N/A
Cann't Modify
Yes

father Object .
Basic parameter
Cann't Modify
No
N/A
Cann't Modify
No
This parameter is only

applicable for Iur
transmission-
N/A
New Session
No

applicable for Iub
transmission-
N/A
New Session
No

applicable for Iub
transmission-
N/A
New Session
No
No
New Session
No

applicable for Iub
transmission-
N/A
New Session
No

applicable for Iub
transmission-
N/A
New Session
No

applicable for Iub
transmission-
N/A
New Session
No

applicable for Iub
transmission-
N/A
New Session
No
DSCP for IP
N/A
New Session
No
Only Valid for UpLink

Reserved Bandwidth for I/B
Traffic
N/A
New Session
No
Only Valid for DownLink

Reserved Bandwidth for I/B
Traffic
N/A
New Session
No

Access Control Profile
Object ID
N/A
can not be
modified
No
This is only a index of CAC

threshold.
cell index for admission

control parameters; one set
of parameters are set in the
default value.
Immediately
No

Initial Load Scene
N/A
can not be
modified
No

Access Control Related to
Basic Priority Object ID
No
This parameter is the Basic

Priority used in the mapping
of AC threshold, and is not
adjustable.

can not be
N/A
modified
the operator's requirement.
The default value is come
from CSL's requirement in
HK. If the operator has no
specific Qos requirement, the Immediately
default value can be used in
ordinary network.
This parameter is the Basic
Priority used in the mapping
of AC threshold; all the BP
value must be set.
No
No
No
No
No
No
No
No
No
No
No
No
DCH admission
can
be set for
parameter:
This
parameter
and reserve
some
resident for
different
BP,
and
reserve
indicates
the
uplink
RTWP
The
function
offor
this
overload
control
(overload
some
resident
overload
threshold
for
E-DCH
parameter:
This
parameter
threshold
should
be
higher
control
(overload
threshold
admission.
If downlink
thecontrol
uplinkTCP
indicates
the
than
admission
should
be higher
thanthis
interference
exceeds
threshold
for
HS-DSCH
threshold)
admission
control
threshold)
admission
control
threshold,
admission.
If the
downlink
The
involved
factor
for
Thenew
involved
factor
for setting
setting
the
service
requested
on
power
exceeds
this
admission
this parameter:
parameter: power
UL DCH
this
E-DCH
will
not
be
admitted.
control
threshold,
the
new
capacity,
UL
RTWP
resource
The
function
of rate
this
resource
using
(DL
DCH
This
parameter
isusers
configured
service
requested
on
HSusing
priority
for
of
parameter:
This
parameter
capacity)
,
power
resource
based
on
the
Basic
Priority,
DSCH
will
notwhether
beusers
admitted.
different
BP,
the
indicates
the
downlink
TCP
using
priority
for
of cell
and
reserve
some
resident
for
This
parameter
is
configured
will
be
overload.
threshold
for
MBMS
different
BP,
whether
the cell
overload
control
control
based
on
the
Basic
Priority,
Influence
ofIfthis
admission.
theparameter:
downlink
will be overload.
(overload
threshold
should be
and
some
resident
for
The reserve
larger
ofthis
this
parameter
power
exceeds
this
admission
Influence
of
parameter:
higher
than
admission
control
overload
control
(overload
value,
the
larger
of
the
cell
control
threshold,
the new
The
larger
of this parameter
threshold)
threshold
should
benot
higher
uplink
capacity
and
the
easier
MBMS
service
will
be
value,
the
larger
of
the
cell
The
involved
factor
for
setting
than
admission
control
of
cell
overload;
The
less
of
The
function
of
this
admitted.This
parameter
downlink
capacity
and
theis
this
parameter:
UL
E-DCH
threshold)
this
parameter
value,
the
less
parameter:
This
parameter
configured
based
on
the
easier
of cell
overload;
The
capacity,
UL
RTWP
resource
The
function
of
this
involved
factor
for
setting
of
the
cell
uplink
capacity
indicates
the
MBMS
load
Basic
Priority,
and
reserve
less
ofpriority
this
parameter
value,
using
for
users
of
parameter:
Code
Resource
this
parameter:
power
Suggestion
for cell
setting
this
threshold
for
some
resident
for
overload
the
less
of
the
downlink
different
BP,
whether
the
cell
Reserved
Ratio,
relative
to
resource
using
rate
(DL
DCH
parameter:
for
the
large
counting/recounting.
If
cell
control
(overload threshold
capacity
will
be
overload.
the
operator's
cell
Qos
capacity)
, higher
power
resource
RTWP
fluctuating
reported
load
is greater
than
thethis
should
be
than
Suggestion
for
setting
Influence
of
this
parameter:
strategy
(when
the
Code
using
priority
for
users
of
from
NodeB,
large
UL
DCH
threshold
indicated
by
this
admission
control
threshold)
parameter:
Qos
Parameters
The
larger
of
this
parameter
Resource
Occupied
Ratio
different
BP,
whether
the
cell
AC
Threshold
should
be
set
parameter,
The
involved
factor
for
which
should
be of
setthe setting
value,
the
larger
cell
reach
the
CodeTreeResRto,
will
overload.
(e.g.be
Default
setting
is
counting/recounting
willkept)
be to
this
parameter:
power
according
to
requirements
uplink
E-DCH
capacity
and
lower
priority
DCH
service
Influence
of this
parameter:
close
the
UL
AC
function
executed
and
the
PTP/PTM
resource
using
rate
(MBMSwill
from
operator.If
the
operator
the
easier
of
cell
overload;
be
refused
tothis
access
the
cell,
the
larger
of
parameter
indirectly
(avoiding
error
mode
will
switched
based
capacity)
,be
power
resource
has
no
specific
The
less
of
this Qos
parameter
so
that
Reserving
certain
value,
the
larger
of
the
cell
admission
refusal)
.
on
the
counting/recounting
using
priority
forofusers
of
requirement,
default
value,
thehigher
less
the
cell
code
for
priority
DCH
Streaming
HSDPA
capacity
result.
different
BP,
whether
the
cell
parameters
should
be
used
uplink
capacity
service
and
improve
the
and
the
easier
of
cell
The
involved
factor for
setting
will
be
overload.
(handover
threshold
is this
higher
Suggestion
for
setting
access
success
rate
of
higher
overload;
The
less
ofand
this
this
parameter:
Qos
Influence
of
this
parameter:
than
ordinary
threshold;
keep
parameter:
For
the
large
priority
DCH
service
)
parameter
value,
the
less
of
capacity
of
MBMS
The
larger
of
this
parameter,
cell
capacity
highest
as
soon
RTWP
fluctuating
reported
The
involved
factor
for
setting
the
cell
Streaming
HSDPA
Influence
of
this
parameter:
the
larger
ofinthe
as
possible
theMBMS
condition
from
NodeB,
large
UL E-DCH
this
parameter:
higher
priority
capacity
The
larger
of
this
parameter
capacity
of
the
cell
and
the
that
cell
is
not
overload)
.set
AC
Threshold
should
be
DCH
service
refused
Suggestion
for setting
this
value,
the
better
ofthe
therate,
MBMS
easier
overload
of
(e.g.
Default
setting
israte.
kept)
code
resource
using
parameter:
Parameters
Qos
and
theQos
less
ofthis
the
cell to
cell.The
smaller
of
close
the
UL
AC
function
Influence
of
this
parameter:
which
should
be
set
MSMS
capacity;
The less
of
parameter,
the smaller
of the
indirectly
(avoiding
error
the
more
oftoReserved
Code
according
requirements
this
parameter
value,
the
MBMS
capacity
of
the
cell
admission
refusal)
Resource,
the
less
code
from
operator.If
the.of
operator
worse
of the
MBMS
Qos
Suggestion
for
setting
thisand
resource
that
can
be
used
by
has
no
specific
Qos
the
larger
of
the
cell
MSMS
parameter: Qos Parameters
DCH
service
requirement,
default
capacity;
which
should of
becurrent
set
priority,
thetomore
of be
code
parameters
should
used
Suggestion
for
setting
this
according
requirements
resource
that
can
be
used
by
(handover
threshold
is
higher
parameter:
Qos the
Parameters
from operator.If
operator
DCH
service
of
higher
priority
than
ordinary
threshold;
keep
which
should
be
set
has no specific Qos
than
current
the
less
cell
capacity
highest
as soon
according
to priority;
requirements
This
parameter
indicates
requirement,
default
of
Reserved
Code
Resource,
as
possible
in
the
condition
from
operator.If
the
operator
Object
ID
and
is
unique
in
parameters should be used
the
code
resource
thatmore
cell
isofnot
.
has
no
specific
Qos
father
Object
. overload)
(handover
threshold
is higher
that
can
be
used
by
DCHkeep
requirement,
than ordinary default
threshold;
service
ofofcorresponding
function
this
parameter:
parameters
should
beasused
cell capacity
highest
soon
priority,
the
less
ofrange
code
indicate
the
IMSI
value
(keep
cell
capacity
highest
as
as possible in the
condition
resource
that
can
be
used
by
Factors
of
consideration:
soon
as
possible
in
the
that cell is not overload) .
DCH
service
higher
priority
when
handover
basedQos
imsican
is
condition
thatofMBMS
than
corresponding
priority;
turned
on, this parameter
be guaranteed)
.
Suggestion
for setting
thisnot
need
to be
set,
otherwise
function
of this
parameter:
parameter:
Qos
Parameters
indicate the IMSI range length
which
should
be set
Factors
of consideration:
according
to
requirements
when handover based imsi is
from
operator.If
the operator
turned
on, this parameter
has
no
specific
Qos
need
to be
set, parameter:
otherwise not
function
of this
requirement,
o is suggested
indicate
of SNAC
to set sothe
thatnumber
code resource
Factors
of
consideration:
can be used by all users fairly
when
handover. based imsi is
(not reserved)
turned on, this parameter
need
to be
set, parameter:
otherwise not
function
of this
indicate the shared MCC
need to be set, otherwise not
For the large RTWP

fluctuating reported from
NodeB, large UL DCH AC
Threshold should be set (e.g.
Default setting is kept) to
close the UL AC function
indirectly
error is
Handover(avoiding
CAC threshold
admission
refusal).
over the ordinary CAC
threshold ; the parameter
setting rules: to get the
highest
cell capacity
For
the large
RTWP at the
condition
cell not from
overload.
fluctuatingofreported
NodeB, large UL E-DCH AC
Threshold should be set (e.g.
Default setting is kept) to
close the UL AC function
indirectly
error is
Handover(avoiding
CAC threshold
admission
refusal).
highest cell capacity at the
condition
cell threshold
not overload.
Handoverof
CAC
is
highest cell capacity at the
condition of cell not overload.
Qos parameter and the
parameter setting rules: to
get the highest cell capacity
at the condition of good traffic
Qos.
For maximal code resource
using rate, o (not reserved) is
suggested to set so that code
resource can be used by all
users fairly (not reserved).
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Basic parameter
can not be
modified
N/A
New users
N/A
New users
N/A
New users
N/A
New users
No
No
No
No
No
No
No
No
No
No
No
No
function of this parameter:

indicate the shared MNC
N/A
need
to be
set, parameter:
otherwise not
function
of this
Configure authorized SNAC
N/A
Index of White IMSI List, used
Parameter
Function:
for parameter
setting This
parameter
IMSI
indication inindicates
OMC-R the
only,
no
Digits
Number inThe
White
List
other meaning.
value
for
Userfrom
Identification.
comes
OMC-R SW, No
Configuration
setting neededRule: This
according to User IMSI
Range.the
Bigger this Function:
parameterThis
is, the
Parameter
less
of users
in one white
list
Parameter
Function:
ThisIMSI
parameter
indicates
the
group.
the
parameter
indicates
whether
High-bit Digits
in white
List for
Smaller
this
parameter
is , the
the
is VIP
Configuration
UserUser
Identification
more
of
users
in
one
white
Rule:
VIP
user
can
use
Configuration Rule: Thisthe list
group.
system
resource
parameter
shouldfirstly
be set
relative
to common
users. If
according
to User IMSI.It's
This
parameter is set to
not adjustable.
"YES", the performance of
the user will be best, but the
Parameter
Function:
This
performance
of common
parameter
users may indicates
be worse the
(thebasic
priority
UE inmaybe
the white
list
service of
online
dropped
Configuration
Rule:
the
larger
and new ordinary service
of
the parameter,
the higher
maybe
access failed)
.If This
Parameter
Function:
Thisthe
priority
of the
UEto
using
parameter
is
set
"No",
parameter
system
theathe
smaller
user willresource;
beindicates
treat as
HSPA
Scheduling
priority
of
the
parameter,
the
less of
common user.
UE
in the
white
priority
of the
UElistusing
Configuration
Rule: the larger
system resource
of
the parameter,
the This
higher
Parameter
Function:
priority
of
the
UE
using
system
resource;
the smaller
congestion
Scheduling
priority
of
the
parameter,
the
of UE in the white list less
priority
of the UE
using
Configuration
Rule:
the larger
system
resource the higher
of
the
parameter,
Parameter
Function:
This
Function:
If allUE
radio
links
priority
of the
using
parameter
indicates
the
handover
to DRNC,
CS
system
resource;
the
smaller
application
priority
of UE
in
relocation
is
performed
for
of
the
parameter,
the
less
the
white
list
VIP
users
when
priority
of the
UE
using
Configuration
Rule:
the
VipCsReDelayTimer
is larger
system
resource
of
the
parameter,
the
higher
expired
priority
of
the
UE
using
Configuration Rule: user
system
resource;
the smaller
experience,
service
of
the
parameter,
the
less
interruption
priority
of the UEisusing
If
the parameter
larger,
system
resource
relocation
is triggered more
slowly.
relocation is triggered more
quickly.
Adjustment suggestion:
UTRAN will doesn't perform
relocation for VIP via IUR to
avoid service interruption and
New users
New users
N/A
can not be
modified
N/A
can not be
modified
IMSI Digits Number in White

List for User Identification,
and no default parameter
value is set. If the Whitelist
service setup
Feature is activated, this
parameter
should
IMSI
High-bit
Digitsbeinset
white
according
to Identification,
IMSI Digits of
List for User
the
andnetwork
no default parameter
value is set. If the Whitelist
service setup
Feature is activated, this
according to IMSI of the
network.
For VIP may preempt
resource of common users,
service setup
so VIP will not used in
ordinary scene
the users in whitelist
commonly have higher
priority than common users,
so the default value is set to
the highest priority.
VIP users' experience and
service interruption are
default value.
service setup
service setup
service setup
service setup
Immediately
No
No
No
No
No
No
No
No
No
No
No
No
VIP users when

VipPsReDelayTimer is
expired.
Configuration Rule: user
experience, service
interruption
If the parameter is larger,
slowly.
quickly.
Adjustment
suggestion:
Object
ID and
is unique in
UTRAN
will doesn't
perform
father Object
.
relocation for VIP via IUR to
avoid service
function
of thisinterruption
parameter:and
improve user
experience.
Configure
authorized
SNAC
need
to be
set, parameter:
otherwise not
function
of this
Parameter
function:
Configure authorizedWaiting
LAC
Time
After
UE Sending RRC
Factors
of consideration:
CONNECTION
when handover SETUP
based imsi is
REQUEST
Message.
For
turned on, this
parameter
details,
please
refer
to
"Parameter Description".
Parameter
controlling
factor:
Parameter
function:
This
parameter
indicates
MO
the
round-trip
time
delay
maximum
number of
object
ID.
between UE andofUTRAN
retransmissions
the RRC
The
larger parameter
value
CONNECTION
REQUEST
means
the
longer
waiting
time
Parameter
function:
Waiting
message. For
details,
please
and
the
longer
delay
for
the
Time
for
Receiving
"In
Sync"
refer to "Parameter
UE's
REQUEST
message
from
L1
in Idle Mode.
For
Description".
retransmission.
If
the
first
details,
please
refer
to
REQUEST
"Parameter
Description".
the
successmessage
rate and is
time
failure,
it
increases
the
time
Parameter
controlling
delay
of
the
RRC
connection
Parameter function: factor:
delay
of
the
RRC
setup
the
time delay
and of
success
setup.
maximum
number
"in sync"
procedure.
rate
thefrom
dedicated
CH
The of
larger
parameter
value
received
L1 in idle
mode
The
smaller
parameter
value
establishment,
the
time
delay
helps tothe
increase
the success
before
timer T312Idle
may
cause
the
UE
resend
and
rate
oftothe
RRC
rate success
of
the RRC
connection
expires.
useless
REQUEST
connection
setup
setup,
but
it
may
cause
messages,
waist
the
ULvalue
The
smaller
parameter
excessive
message
the time
delay
and
veracity
of
RACH
resource
and
DL
helps
to shorten
retransmission
inthe
theWaiting
Uu and
the
dedicated
CH
Parameter
function:
common
channel
resource
synchronization
procedure,
increase
the
delay.
establishment,
the
time delay
Time
After
UEtime
Sending
and
add
interference
to value
the
but
it
may
cause
the
UE
The
smaller
parameter
of
the
RRC
connection
CELL/URA
UPDATE setup
UL
and
DL.
giving
up
checking
helps
to decrease
the please
Uu
on
dedicated
CH,
callParameter
function:
Message.
For
details,
synchronization
and
messages
and
decrease
the
reestablishment
number
and
Maximum
Number
of
refer
to "Parameter
indicating
the
establishment
time
delay
of
the
RRC
call-drop rate
Retransmissions
of the
Description".
failure,
and UPDATE
decreases
connection
setup,
but factor:
itthe
may
The
smaller
parameter
value
CELL/URA
Parameter
controlling
success
rate
of
the
dedication
decrease
the
success
rate.
helps
to
quicken
the
Message.
For
details,
please
the
round-trip
between UE
CH
establishment.
dedicated
CH establishment
refer
to "Parameter
and
UTRAN.
The
larger parameter
value
procedure,
but
too smaller
Description".
The
smaller
parameter
value
helps
to
let
the
UE
trying
value
may
not
guarantee
the
Parameter
controlling
factor:
means
the
longer
waiting
time
checking
synchronization
as
Parameter
function:
synchronization
And
the
success
rateveracity.
andWaiting
time
of
the
retransmission,
it
helps
far
as
possible
and
increase
Time
After
UE
Sending
UE
may
cause
to
increase
RL
delay
of thethe
CELL/URA
to
shorten
update
the
success
rate,
but it
CAPABILITY
INFORMATION
FAIL
IND number,
update.
procedure,
but
maycallcause
elongates
the
procedure.
Message.
details,
please
reestablishment
number
and
The
larger For
parameter
value
redundant
retransmission
in
refer
to
"Parameter
increase
call-drop
rate.
helps
to
increase
the
success
the Uu.
Description".
The of
larger
parameter
rate
the CELL/URA
update
The
smaller
parametervalue
value
Parameter
controlling
helps
tothe
guarantee
thefactor:
and
avoid
the
UE going
to
means
shorter
waiting
the
between
UE
synchronization
veracity,
butit it
IDLE
due
update
failure,
timeround-trip
of
thetoretransmissino,
and
UTRAN.
may
increase
the
time
delay.
but
it
may
cause
the
helps to avoid redundant
The
smaller
excessive
Uuparameter
message
retransmission,
but mayvalue
means
the
longer
waiting
time
retransmission
and
increase
elongate the update
of
the
retransmission,
it
helps
the
time delay of the update
procedure.
to
shorten the enquiry
procedure.
procedure,
may cause
The smallerbut
parameter
value
redundant
retransmission
helps to decrease
the Uu in
the
Uu.
messages
and the time delay,
The
parameter
but itsmaller
may decrease
thevalue
means
the
shorter
waiting
success rate and cause the
time
of thetoretransmissino,
UE going
IDLE due to it
helps
avoid redundant
updatetofailure.
VIP users' experience and

service interruption are
default value.
Immediately
Basic parameter
can not be
modified
N/A
New users
N/A
New users
Basic index
can not be
modified
The default value is mainly

set by the round-trip time
delay between UE and
UTRAN.
At Commit

At Commit
of the RRC connection setup.
time delay and success rate
of the dedicated CH
establishment.
At Commit

At Commit
time delay and veracity of the
dedicated CH establishment.
UTRAN.
At Commit

of the CELL/URA update.
At Commit

UTRAN.
At Commit
No
No
No
No
No
No
No
No
No
No
No
No
Message. For details, please

refer to "Parameter
Description".
Parameter function: Period of
Parameter
controlling
factor:
Cell/URA Update
When
UE is
the
in success rate and time
delay
of the UE capability
enquiry.
A_PCH State. For details,
The
larger
value
please
referparameter
to "Parameter
helps
to
increase
the
success
Parameter
function:
waiting
Description".
rate of
UE
capability
time
forthe
reentering
service
Parameter
controlling
factor:
enquiry,
but
it may
cause
area
after
UE
isofout
oflost the
the time
delay
the
excessive
Uudetails,
message
service.
For
please
touch between
UE and
retransmission
and increase
refer
to
"Parameter
UTRAN.
the
delay
of the enquiry
Description".
Thetime
larger
parameter
value
procedure.
Parameter
controlling
factor:
helps to decrease
the
Parameter
function:
Waiting
The
smaller
parameter
value
the
time
delay
of
UE
trying
signalling
load
in
the
Uu,
but it
Time After Sending RRC
helps
to
decrease
the
Uu
reentering
service
area,
postpones
the
detection
of
CONNECTION RELEASE
messages
and
the
time
delay,
avoidance
of
UE
going
to
Parameter
function:
Waiting
the UE losing
touch
with
the
COMPLETE
Message
in
but
it
may
decrease
the
IDLE
Time
RNC.After Requesting
CELL_DCH
State. For details,
success
rate.
The
parameter
value
Connection
Establishment
in
The smaller
smaller
parameter
value
please
refer
to "Parameter
helps
to
shorten
the
time
Other
System
(eg.
GSM)
.
For
helps to quicken the detection
Description".
Parameter
function:
Waiting
delay
the
UErefer
trying
to
redetails,
please
to
of
the of
UE
losing
touch
with
Parameter
controlling
factor:
Time
for
Receiving
"In
Sync"
enter
service
area,
but
may
"Parameter
Description".
the RNC,
but
it
increases
time delay of the RRCthe
from
L1 in
Connected
Mode.
quicken
UE
going
to IDLE
Parameter
controlling
factor:
signalling
load
in the
Uu.
connection
release.
For
details,
please
refer
to
due
to
reselection
failure.
the
rate and time
Thesuccess
smaller parameter
value
"Parameter
Description".
The
larger
parameter
value
delay
of
the
PS
inter-rat
helps to shorten the RRC
Parameter
controlling
factor:
helps
to and
postpone
UE
handover
from
to
release
let 3G
thethe
UE2G
going
the
time
delay
and
success
going
to
IDLE,
but
may
The
larger
parameter
value
to
IDLE
a.s.a.p.
Parameter
function:
rate
of
dedicated
CH
increase
the
time
helps
tothe
let
the
UEdelay.
accessing
The
larger
parameter
value
maximum
number
of
"in
sync"
establishment,
the
time
delay
2G
as far as
possible,
and
increases
the
time
delay
of
received
from
L1
in
and
success
rate
of
the
status
increase
the
success
rate of
the
RRC
release
and
connected
mode
beforebut
theit
transfer
tothe
the
dedicated
the
inter-rat
handover,
postpone
UE
going toCH
timer
T312Connected
The
smaller
parameter
value
Parameter
function:
Waiting
increases
the
time delay
and
IDLE.
expires.
helps
to shorten
the quality
Time
After
DPCCH
may cause
the service
Parameter
controlling
factor:
synchronization
procedure,
Established
in CELL_DCH
drop.
the
time
delay
and
veracity
of
Parameter
function:
but
it
may
cause
the
UE
State
Losing
Synchronization.
The smaller parameter value
the
dedicated
CH
Maximum
Number
of
giving
up
checking
For
details,
please
refer
to
helps to shorten the time
establishment,
the
Successive
"Out
oftime
Sync"
synchronization
and
"Parameter
Description".
delay and guarantee
thedelay
of
the
status
transfer
the
Received
from
L1.
For
details,
indicating
the
establishment
Parameter
controlling
service quality,
but it tofactor:
dedicated
CH,
callplease
refer
to
"Parameter
failure,
and
decreases
the
the
time delay
veracity
decreases
the and
success
rateof
of
reestablishment
number
and
Description".
success
rate
of
the
dedication
the RL
failure
indication.
handover.
Parameter
function:
Waiting
call-drop
rate
Parameter
controlling
CH
The
smaller
parameter
value
Timeestablishment.
for Completion
offactor:
Cell
The
smaller
parameter
value
the
time
delay
and
veracity
of
The
larger
parameter
value
helps
to
quicken
the
UE
Update When Radio Link
helps
to
quicken
thetrying
the
RL
indication,
callhelps
tofailure
let
the
UE
reporting
RL
failure
and (s)
Fails
and
Radio
Bearer
dedicated
CH
establishment
reestablishment
number
and
checking
synchronization
asto
trigger
call-reestablishment
Associated
with
T314
Exist.
procedure,
but
too
smaller
call-drop
rate
far
as
possible
and
increase
guarantee
the
service
quality,
For
details,
please
refer
to
Parameter
function:
Waiting
value
may
not
guarantee
the
The
smaller
parameter
the
success
rate,
but it value
but
may
cause
redundant
"Parameter
Description".
Time
for
Completion
of Cell
synchronization
veracity.
helps
to
quicken
the
UE
elongates
the
procedure.
due
to
Parameter
controlling
factor:
Update
When
Radioand
Link
The
larger
parameter
value
reporting
RL
failure
radio
quality
fluctuation.
whether
the
service
suitable
Fails
and
Radio
Bearer
(s) to
helps
tocall-reestablishment
guarantee
thevalue
trigger
The
larger
parameter
for
or
Associated
with
T315
Exist.
synchronization
veracity,
but it
guarantee
the service
quality,
helps
to
increase
the
veracity
not,
the
success
rate
the
For
details,
please
referdelay.
tocallmay
increase
the
time
but
it
may
cause
redundant
and
avoid redundant
callreestablishment
and call-drop
"Parameter
Description".
due
reestablishment,
but
it
rate,
the
time
delay
of
thetoCS
Parameter
controlling
factor:
radio
quality
fluctuation.
And
postpones
the
UE
reporting
RB
release.
Parameter
whether
thefunction:
service
suitable
may
cause
to
increase
RL
RL
failure
and
later
callThecall-reestablishment
larger number
parameter
maximum
of value
for
or
FAIL
IND
number,
callreestablishment,
causing
the
helps
to success
postpone
thereceived
UEcallsuccessive
"in sync"
not,
the
rate
the
reestablishment
number
and
service
quality
may
not
be
releasing
the
CS
RB,
from
L1
during
T313
is
reestablishment
and
call-drop
increase
call-drop
rate.
guaranteed.
increase
the
rate
of
activated.
Forsuccess
details,
please
rate,
the
time
delay
of
the PS
The
larger
parameter
value
the
cell
update
and
callrefer
to
"Parameter
RB
release.
helps
to guarantee
the
reestablishment,
and
Description".
The
larger
parameter
value
veracity,
but
it
may
increase
decrease
call-drop
rate,
Parameter
controlling
factor:
helps
to
postpone
the
UEbut
the
time
delay
of
the
RL
may
elongate
the
release
the
synchronization
time
releasing
the PS RB,
increase
failure
indication,
postpone
when
delay
and
veracity
ofthe
thecell
the
success
rate
of
the
and
failure.
dedicated
CH,
callupdate
and
callthus
not
guarantee
the
The
smaller parameter
value
reestablishment
number
and
reestablishment,
and
service
in the
time.
helps toquality
quicken
release
call-drop
rate
decrease
call-drop
rate,
but
of
the
CS RB,
but release
it mayvalue
The
smaller
parameter
may
elongate
the
cause
the
UE
releasing
the
helps
to quicken the
when call-reestablishment
CS
RB
prematurely
and
synchronization
procedure,
failure.
decrease
theguarantee
success rate
of
but
not
the
Themay
smaller
parameter
value
the
call-reestablishment.
synchronization
veracity.
And
helps to quicken the release
may
to increase
of thecause
PS RB,
but it mayRL
FAIL
call- the
causeIND
thenumber,
UE releasing
reestablishment
number
PS RB prematurely
and and

of the UE capability enquiry.
At Commit

set by the general tolerant
At Commit
time delay of the lost touch
between UE and UTRAN.
time delay of UE trying
At Commit
reentering service area and
the avoidance of UE going to
IDLE.
set by the time delay of the
RRC connection release.
At Commit

set the success rate of the
PS inter-rat handover from
3G to 2G.
At Commit

time delay and success rate
of the dedicated CH
establishment.
At Commit

At Commit
At Commit
RL failure indication.
RL failure
indication.
The
default
value is
comprehensively set by
whether the service suitable
for call-reestablishment or
not, the success rate of the
call-reestablishment,
The
default value is and the
time
delay of the CS
comprehensively
set RB
by
release.
whether the service suitable
for call-reestablishment or
not, the success rate of the
call-reestablishment, and the
time delay of the PS RB
release.
At Commit
At Commit
At Commit
At Commit
No
Yes
No
No
No
No
No
No
No
No
No
No

the time delay of the cell
reselection
in PCH
status.
Function: The
switch
used for
The
larger
parameter
indicating whether thevalue
fast
helps
to letisUE
doing cell
dormancy
active.
reselection
while
keeping
Function:
UE's
Waiting
Time
Configuration
Rule:
PCH
status.
of
Sending
Message
To
turn
on the
function, it can
The
parameter
value
"Signalling
Connection
makesmaller
the UE
that support
can
shorten
the
time
UE
Release
Indication"
(with
Fast Dormancy enter an
keeping
in PCH consumption
status, and
cause)
efficient. battery
let
the
UE
transfer
Configuration
Rule:
It FACH
needs
state as quickly as to
possible
status
sooner
when
UE
out
to
consider
the
round
tripistime
when there is no PS data,
but
between
UE and
UTRAN.
itofisservice.
also easy
to result
in
The
parameter
equaling
value of
thisvalue
parameter
is
ping-pong
adjustment.
to
0
can
let
the
UE
transfer
to
larger,
the
time
of
UE
sending
To turn off the function,
it can't
CELL_FACH
the
message"
Signalling
make
the UE status
enter
an
immediately
when
the UE is
Connection
Release
efficient battery consumption
out
service
area
in
PCH
Indication"
again
is possible
longer,
stateofas
quickly
as
status,
and
cell
and
timetrigger
entering
whenthe
there
isofnoUE
PS
data, but
reselection
the cause
an
efficient
battery
it can
avoid with
the ping-pong
"re-entering
service
area"
in
Main
function:
This
parameter
consumption
state
when
adjustment and provide
better
FACH
status.
indicates
whether
attach
and
there
is
no
PS
data
will
be
user experience.
This
parameter
is an
object
detach
procedures
are
prolonged.
identity.
Ittois
unique
under
required
used
or not.itsis
The value
ofbe
this
parameter
parent
object
The
value
TRUE
means:
smaller,
it may
result
in
When
the
UE
is
switched
off
unnecessary
Main
function:sending
This parameter
or
the
SIM
card
is
unplugged,
message
"Signalling
This parameter
indicates
the
Main
function: The
network
send
one message
of IMSI
Connection
Release
supported
CN
domain
oftothe
operation
mode
is used
detach
the
network
side.
Indication",
and
athe
waste
of
PLMN.
indicatetowhether
Gs
When
theisfactor:
UE
is switched
on,
resource.
Influence
set the
value
interface
installed
or not.
supposing
thatsupported
theOperation
UE is CN
stillI
accordingMode
the
Network
of
in
the registration
district
domain
ofthat
the Gs
PLMN
indicates
interface
where
it
is
deactivated,
UEs
occurs.
Network
Mode
of
Main
function:
The
T3212
is
shall
apply
IMSI
attach
and
Operation
II indicates
that Gs
the
timer
for
periodic
location
detach
procedure.
interface
does in
not
occur.
area
updating
deciphers.
Main
function:
This
parameter
The value
FALSE
means:
Influence
factor:
the
value
Influence
factor:
The
network
indicates
the
CS
domain
DRX
UEs
shall
not
apply
IMSI
should
set
by
the
network
can
get
the
location
of
the UE
cycle
length
coefficient.
attach
and
detach
procedure
Planning&Optimization.
in
time;the
The
should be
Influence
factor:
power
When
UEtimer
is switched
off I
The
network
operation
mode
smaller
than
the
timer
of
consumptive
of
the
UE;
or
the
SIM
card
is
unplugged.
indicates
Gs interface
exists.
periodic
position
updates
in
system
cost
because
of
too
Influence
factor:
power
Main
function:
This
parameter
the network
operation
mode
II
CN
side;
system
cost.
much
paging;
the
rate
of
the
consumptive
of
the
UE; DRX
indicates
the
PS
domain
Gs
interface
If
the
timer
is
bigger
than
the
UE
response
with the of
paging
system
cost
because
too
cycle
length
coefficient.
does
not
exist.
timer
of
periodic
position
message.
much
paging.
Influence
factor:
power
The
Gs interface
means
that
updates
CN
side,
it much
might
The
bigger
the
parameter
is,
choice
0:aincausing
too
consumptive
of
the
UE;
there
is
LA/RA
combined
cause
the domain,
CN
paging
failure
in
the
CS
the
slower
pagingfrom
CN.
system
cost
because
of
too
update.
LA/RA combined
or
KPI
drop.
the
rate
ofavoiding
the the
UE rate
responsing
choice
1:when
toowith
much
much
paging;
ofitthe
update:
UE
a
If
the
timer
is
too
small,
may
with
the
paging
message
is,
paging
from CN.
UE
response
with
the
paging
CS
connection
trigger
cause
too
much
location
area
and
the longer
timerthe
of
message.
attaching
to thethe
SGSN,
updating
message
and is,
may
accessing
the
network
The
bigger
the parameter
is,
SGSN
cause
too much
system
cost.
which
may
bring
the
user
bad
in
the
PS
domain,
the
slower
will
trigger
the
ROUTE
Function:
Modification
Period
The
parameter
should
feeling;
this
may causing
the
rate and
ofprocedure.
the
UE
UPDATE
Coefficient
for from
MBMS.
reference
with
CN responsing
side
and,
repeat
paging
the CN
with
the
paging
message
Configuration
Rule:
It needs
should
be smaller
than
theis,
which
may
bring
unnecessary
and
the
timer ofof
to
consider
the the
timeliness
timer
of longer
periodic
position
downlink
interface.
However,
accessing
the
network
is,
the
information
update
and
updates
in
CN the
side.
this
may
save
power
which
may
bring
the
user
bad
UE's
battery
consumption.
consumptive
of the
UE.
feeling;
and
this
may
causingis
The
value
of
this
parameter
The smaller
the
parameter
repeat
paging
from
the period
CN is,
,
larger,
the
modification
in
the CS
domain,
the faster
which
may
bring
unnecessary
for
MBMS
is
the
the
rate ofinterface.
thelonger,
UE responsing
downlink
However,
timeliness
of
the
information
with
the paging
message
this
may
save
the
power is,
update
isshorter
worse.
and
the
the
timer
consumptive
of the
UE. of is
The
value of
this
parameter
accessing
the
network
is. is,
The smaller
the parameter
smaller,
the
modification
However,
this
may the
raise
the
in
the
PS
domain,
faster
period
for MBMS is shorter,
power
consumptive
ofobject
the UE.
the
rate
of
the
UE
responsing
This
parameter
is
an
the timeliness of the
with
the Itpaging
message
is,
identity.
is update
unique
under
its,
information
is
better
and
the
shorter
the
timer
of
parent
object
but the UE's battery
accessing
theisnetwork
is.
consumption
also much
However, this may raise the
more.
power consumptive of the UE.

set by let UE entering FACH
status a.s.a.p. and trigger UE At Commit
doing cell reselection in this
status.
The reason of the
to try best to provide better
user experience.
Immediately
The reason of the

to consider the round trip
time between UE and
UTRAN.
Immediately
N/A
Cann't Modify
The default value is 2: CS

+PS.The value should be set
Immediately
according the supported CN
domains of the PLMN
The default value is 1: Avoid
CN sending unnecessary call Immediately
to UE.
None
network can get the location
of the UE in time; The timer
should be smaller than the
timerdefault
of periodic
The
valueposition
consider all
updates
in CNpower
side; system
these factors:
cost.
consumptive of the UE;
system cost because of too
much paging; the rate of the
UE response with the paging
The
default value consider all
message.
these factors: power
consumptive of the UE;
system cost because of too
much paging; the rate of the
UE response with the paging
message.
The reason of the
to consider the timeliness of
the information update and
UE's battery consumption.
N/A
Immediately
When system
information is
changed
When system
information is
changed
When system
information is
changed
Immediately
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
Relocation
procedure
in the
terminate the
relocation
source
RNC.procedure.
Upon reception
preparation
If
of
the isRELOCATION
there
no response from the
COMMAND
message the
CN to the RELOCATION
source
RNC message
shall stopbefore
the
REQUIRED
timer
Trelocprep,
start
the
timer Trelocprep expires in
timer
Trelocoverall
andshall
the SRNC,
the SRNC
terminate
Relocation
cancel thethe
relocation
Preparation
procedure.by
If the
preparation procedure
Iu
Release
not
initiating
theprocedure
relocationiscancel
initiated
towards
the
source
procedure with the
RNC
from the
CN for
before
appropriate
value
the the
expiry
of
timer
Trelocoverall,
cause IE, e.g. "Trelocprep
the
source RNC should
expiry".
initiate
the Iu
Release factor:
Parameter
controlling
Request
procedure
towards
the process
delay and
the
CN
with
a
cause
value
success rate of the relocation
"Trelocoverall
expiry".
procedure
N/A
Parameter
controlling
factor:
The
larger value
means
Parameter
It the
the
delay
offunction:
the relocation
longer
relocation
preparation
specifies
the time to start
procedure.
time
in the
SRNC
and helps
sending
the
forwarded
PDCP
The
smallerthe
parameter
value
to
increase
success
rate
SDUs
in
the
target
RNC
means
the
shorter
resource
of
the
relocation
prepare
during
relocation
of SRNS.But
suspension
in the
procedure,
but
alsoSRNC.
increase
Parameter
controlling
ifthe
it is
too small,
the
CNfactor:
may
delay
of
the
relocation
the
general
not
finish thetransmission
resource
procedure.
delay
and quality in uu
Parameter
Iu
release.
The
smallerfunction:
value induces
the
interface.
interface
parameter.
If
the
parameter
value
contrary
result.
The
general
value is 80ms.
Parameter
factor:
induces
thecontrolling
contrary
result.
shall
be
larger
than
the
The
general
value
is
8s.
Parameter function: Iu
RESET process
delay in the
interface
parameter.
CN.
Parameter
function:
Iu than
It shall be equal
or larger
interface
parameter.
It
the RESET
process delay
in
specifies
the
protection
time
the RNC, and shall be smaller
for
processing the
thanthe
theRNC
corresponding
RESET
RESOURCE
parameter
value
in the
Parameter function:
Iu CN.
message
from
the
CN.
The
general
value
in
interface parameter. the CN
Parameter
controlling factor:
factor:
is 20s.
Parameter
controlling
the
the process
process delay
delay of
of the
the Iu
Iu
global
global procedure.
procedure.
The
The larger
larger value
value means
helps tothe
longer
interrupted
service
Parameter
function:
the timer
decrease the message
time
between
RNC
and
for
Ignoring
OVERLOAD.
retransmission, but mayCN.
The
toothe
small
value
may
Parameter
controlling
factor:
cause
RNC
waiting
time is
causes
the
RNC
not
IU
interfacing finish the
tooport
long.
resource
release
inhelps
time.to
parameter.The
value
The smaller
value
influence
the
responding
rate
decrease the waiting delay
in
to
decrease
the
load
of
CN
the RNC, but may cause the
The
larger
parameter
CN not
finishing
the value
Parameter
function:
thecause
timer
means
triggers
to reduce
the
procedure
in
time
and
for
not
allowing
to
increase
system
load
slower. the
Parameter
function:
redundant
message
traffic.
The
smaller
parameter
value
maximum
number
of RESET
retransmission.
Parameter
controlling
factor:
means
RNC
responses
RESOURCE re-transmit.
IU
port interfacing
OVERLOAD
of CNparameter.
more
Parameter
controlling
factor:
The
larger
parameter
value
timely
and
triggers
to reduce
IU
port
interfacing
parameter.
means
triggers
resume
the system
loadtofaster.
The
larger
parameter
valuethe
system
load
slower.
means
thatfunction:
RNC shall
Parameter
themore
The
smaller
parameter
value
repeat
the
entire
Reset
maximum
number
of RESET
means triggers
to resume
the
Resource
procedure
when
re-transmit.
system
load more
quick.
RNC
doesn't
receives
RESET
RESOURCE
ACKNOWLEDGE
message
value .
The
smaller
parameter
value
means that RNC shall more
means the
thatentire
RNC Reset
shall less
repeat
repeat
the when
entire RNC
Resetdoesn't
procedure
Resource
procedure
when
receives RESET
RNC
doesn't
receives
RESET
ACKNOWLEDGE message
.
RESOURCE
The smaller parameter value
ACKNOWLEDGE
message
means that RNC shall
less
repeat the entire Reset
procedure when RNC doesn't
receives RESET
ACKNOWLEDGE message
The default value

At next use
The default value

At next use
N/A
New Users
N/A
At next use
The default value

At next use
The default value

At next use
The default value

At next use
The default value

Can't Modify
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
The default value

Can't Modify
The default value

At next use (i.e.,

shall not affect
ongoing
connections)
No
This parameter is an object

identity. It is unique under its
parent object
Basic index
can not be
modified
No
Configuration index
Configuration index
At next use
DRBC strategy name
Immediately
Basic index
can not be
modified
No
No
No
No
No
No
No
No
No
No
Function: Event 4B Counter

Threshold for HS-DSCH/EFunction:
This
parameter
DCH
Using
DTX/DRX
to PCH
indicatesbythe
DRBC
strategy
Shared
Uplink
and
name.
Downlink.
It is mainly used
for It needs
Configuration
Rule:
describing
to
considerthe
theDRBC
user strategy.
experiences and the
utilization
ratio ofis
radio
This parameter
anCounter
object
Function:
Event
4A
resources.
identity.
It
is
unique
under its
Threshold for CELL_FACHThe
value
of this parameter is
parent
object
>CELL_DCH.
smaller,
it will be
easier
to
Configuration
Rule:
It needs
trigger
HS-DSCH/E-DCHto consider the user
>PCH
basedand
on traffic
volume
experiences
utilization
measurement,
and
the
ratio
of radio
resource.
Function:
4A Counter
release
ofEvent
radio
resource
is is
The value
of
this
parameter
Threshold
for
Increasing
Rate
also faster,
but
it also can't
smaller,
the
response
to
on
DCH
or DCH->HSPA.
make
best
user's
needofisDTX/DRX;
faster,It and
it
Configuration
Rule:
needs
The
value
of this
parameter
is
will
be
easier
to
trigger
to
consider
the
user
larger,
it
will
be
more
difficult
CELL_FACH->CELL_DCH
experiences
and utilization
to
triggerswitch,
HS-DSCH/E-DCHchannel
but it may
ratio
of
radio
resource.
>PCH
based
on 4B
traffic
volume
resultvalue
in
a Event
waste
of
radio
Function:
Counter
The
of
this
parameter
is
measurement,
it
can
make
resource.
Threshold
for
Decreasing
smaller,
the
response
to
best
of
DTX/DRX,
the
user is
Function:
Event
4B
Counter
The
value
ofisthis
parameter
Rate
on
DCH.
user's
need
faster,
andthe
it
experience
is
good,
but
Threshold
for to
CELL_DCH
to
larger,
the response
user's
Configuration
Rule:
Ittoneeds
will
be
easier
trigger
rate
release
of radio
resource
is
PCH.
need
is
slower,
and
it
will
be
to
consider
the
user
increase
or
channel
switch,
slow,
and
it will
influence
the
Configuration
Rule:
Itwaste
needs
more
difficult
to
trigger
experiences
and
utilization
but
it
may
result
in
a
of
utilization
ratio
of
radio
to
consider
the
user
CELL_FACH->CELL_DCH
ratio
of
radio resource.
radio
resource.
resources.
experiences
the
channel
switch,
will
The
of
this
parameter
Function:
Event
Counter is
The value
value
of and
thisit4B
parameter
is
utilization
ratio
of
radio
influence
the
user
smaller,
it will
easier
to to
Threshold
for be
CELL_FACH
larger, the
response
to user's
resources.
experiences.
trigger
decrease,
andbe
it
PCH.
need israte
slower,
and it will
The
value
of
this
parameter
will
influence
user
Configuration
Rule:
It
needs
more difficult
to trigger
rate is
Function:
Event
4B
Counter
smaller,
it
will
be
easier
to it
experiences.
to
consider
the
user
increase orfor
channel
switch,
Threshold
CELL_DCH
to
trigger
CELL_DCH->
PCH
The
value of and
this
parameter is
experiences
the
will
influence
the user
Idle.
based
on
traffic
volume
larger,
it will
beRule:
more
utilization
ratio
of
radio
experiences.
Configuration
Itdifficult
needs
measurement,
and
the
to
trigger
rate
decrease
and
resources.
to
consider
the
user
release
of
radio
resource
is is
the
user
experiences
is
better,
The value of and
this the
parameter
experiences
also
faster,
butbe
it easier
also will
be
but
it
is
easier
to
result
in
a
smaller,
it
will
to
utilization
ratio of
radio
Function:
Event
Counter
easier
to
result
in4B
ping-pong
waste
of
radio
resource.
trigger
CELL_FACH->PCH
resources.
Threshold
for
CELL_FACH
adjustment
because
of the to
based
on traffic
volume
The
value
ofofthis
parameter
is
Idle.
fluctuations
traffic
volume;
measurement,
and
the to
smaller,
it
will
be
easier
Configuration
Rule:
It needs
The
value
this
parameter
release
of of
radio
resource
is is
trigger
CELL_DCH->Idle
to
consider
the
user
larger,
it
will
be
more
difficult
also faster,
but itvolume
also will be
based
on CELL_DCH->
traffic
experiences
andinthe
to trigger
PCH
easier
to result
ping-pong
measurement,
and
the
utilization
ratio
ofvolume
radio
based
on traffic
adjustment
because
of
the
release
of radioand
resource
is
resources.
measurement,
influence
fluctuations
of traffic
volume;
also
faster,
but
it
also
will
be
The
value
of
the
utilization
ratioparameter
of radio is
The
value
of this
this
parameter
is
easier
toitresult
ineasier
ping-pong
smaller,
will
be
to
resources.
larger,
it
will
be
more
difficult
adjustment
because of the
trigger
CELL_FACH->Idle
to trigger
CELL_FACH->PCH
fluctuations
of traffic volume,
based
on
traffic
based
on increase
traffic volume
volume
and
it
will
the
Uu
measurement,
and
the
measurement,
and
influence
signalling
load;
release
of radio
resource
the
utilization
ratio
of radiois is
The
value
ofbut
this
parameter
also
faster,
it
also
will be
resources.
larger,
it will
be in
more
difficult
easier to
result
ping-pong
to trigger CELL_DCH->Idle
adjustment
because of the
based
on traffic
volume
fluctuations
of traffic
volume;
measurement,
and
it is also is
easier
result
a waste
of
larger, to
it will
be in
more
difficult
radio
resource
and
influence
to trigger CELL_FACH->Idle
the
utilization
ratio
of radio
based
on traffic
volume
resources.
The reason of the

The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
At next use
At next use
At next use
At next use
At next use
At next use
At next use
At next use
No
No
No
No
No
No
Yes
Yes
No
No
No
No
Function:
Event
4B Counter
Configuration
Rule:
Threshold
forthis
Cell_Dch
to is
The value of
parameter
Cell_FACH.
larger, the time of camping on
Configuration
needs
PCH is longer Rule:
when Itthere
is
to
noconsider
data, Forthe
theuser
frequent
experiences
the and
services to beand
setup
utilization
ratio
of
released scene, itradio
will save
resources.
signalling resource because
The
of this4A
parameter
RRCvalue
connection
setup
Function:
Event
Counter is
smaller,
easier
to
process itiswill
no be
need.
Threshold
for
E-TTI
Switching
trigger
Cell_DCH->Cell_Fach
The value
parameter is
from
10msoftothis
2ms.
based
traffic
volume
smaller,onthe
time
of camping
Configuration
Rule:
It needs
measurement,
the
Function:
4Aand
Counter
onconsider
PCH isEvent
shorter,
it is
to
the and
user
release
of radio
resource
Threshold
fortoE-TTI
Switching
more
easier
enter
Idle is
experiences.
also
faster,
but
itconnection
also
will be is
from
10ms
to
2ms.
state,value
and of
RRC
The
this
parameter
easier
to
result
ping-pong
Configuration
Itdifficult
needs
setup process
isin
need
when
larger,
it will
beRule:
more
adjustment
because
of the
to
consider
user
new
service
toE-TTI
be
triggered.
to
trigger
thethe
fluctuations
of
traffic
volume;
experiences
and
the
conversionEvent
from
to
Function:
A10ms
Counter
The
value
of
this
parameter
is
utilization
ratio
of
radio
2ms, and itfor
willDecreasing
influence user
Threshold
larger,
it
will
be
more
difficult
resource.
experience;
Rate
on DL DCH Based on Dto
trigger
The
value
of
The
valueCell_DCH
of this
this parameter
parameter is
is
TCP.
->Cell_Fach
based
on
traffic
larger,
it
will
be
more
difficult
smaller,
it
will
be
easier
to
Configuration
Rule:
It needs
Function:
Event
B Counter
volume
measurement,
and
to
trigger
the
E-TTI
trigger
the
E-TTI
conversion,
to
consider
the
user
Threshold
for
Restriction
influence
the
utilization
ratio
conversion
from
2ms
to
but
it is alsoRate
easier
to
experiences
andon
ratio
ofDCH
callin
Increasing
DLresult
of
radio
resources.
10ms,
and
it
will
influence
the
ping-pong
reconfiguration
drops.
Based
on ratio
D-TCP.
utilization
of
radio
because
throughput
The
valueofofthe
this
parameter
Configuration
Rule:
It needs is
resource;
fluctuation.
smaller,
it
will
be
easier
to
to
consider
the
user
The
value
this
parameter
trigger
rateofdecrease
based is
experiences.
smaller,
it will
beit easier
tobe
on
D-TCP,
and
also
will
The
value
of
this
parameter
is
trigger
the
E-TTI
conversion,
easier
toitresult
ineasier to
smaller,
will
be
but
it is also easier
to result in
unnecessary
rate decrease
trigger
rateSwitch
increase
based on
Function:
of
ping-pong
reconfiguration
and
influence
user
traffic
volume
measurement,
Function:
Switch
of
Transferring
to CELL_FACH
because
of the
throughput .
experiences.
but
it also will be
easier to
URA_PCH/CELL_PCH
Configuration
Rule:
fluctuation.
The
value
of
this
parameter is
result
inon
ping-pong
Support.
To
turn
the
function,
it can
larger,
it
will
be
more
difficult
adjustment
with
rateuse
decrease
Configuration
Rule:
make
CELL_FACH
for
to
trigger
rate
decrease
based
D-TCP
because
of
Turn
ononthe
function,
thebased
bear
the
low
rate
traffic,
itUE
can
on
D-TCP,
but it may
increase
power
fluctuation.
can
be
transferred
to
PCH
save
dedicated
resource, but
the
risk
of call
drops.
Function:
Times
The
value
ofincrease
this
parameter
state
when
there
is no
data
it may
alsoIncrement
the
riskofis
Event
4B0
for
UE
which
is is
not
larger,
it
will
be
more
difficult
transmission,
and RRC
of call drop because
there
sensitive
for
Battery
to
recover
from
status
of
high
connection
setup in
process is
no power control
Consumption
Transferred
transmit
so it is
willdata
beto
no
need power,
whenstate.
there
CELL_FACH
URA_PCH/CELL_PCH
or
Idle
more
difficult
to
trigger
rate
transmission.
For
the
frequent
Function:
4B Counter
To turn offEvent
the function,
it can't
state.
increase
based
on
traffic
services
to
be
setup
and
Threshold
for
Cell_Dch
to
make CELL_FACH use for
Configuration
Rule:
It needs
volume
and
released
scene,
totraffic,
turn
on
the
Cell_FACH
for
UE
using
bear
themeasurement
low
rate
, and
to
consider
UE
battery
influence
user
experiences.
function,
will save of
radio
Dtx/Drx.
the effectitutilization
radio
consumption
and
theIt user
resource
interface,
but
Configuration
Rule:
needs
resourcesofisUu
low.
experience.
there
is
Cell
Update
to consider the user in PCH
The
value of and
this the
parameter is
state.
experiences
larger,
transition
for
Turn offthe
the
function,
thethe
UE
utilization
ratio
of radio
UE
URA_PCH
or to
Idle
is
can'ttobe
transferred
PCH
resources.
more
difficult,
andparameter
statevalue
when
isthe
no user
data is
The
ofthere
this
experience
is
better,
butto
the
transmission,
andeasier
it will
be
smaller,
it will be
more
battery
consumption
for
transferred
to
Idle
state,
and
trigger Cell_DCH->Cell_Fach
UE.
RRC
connection
setup
based on traffic volume
The
value
this
parameter
process
is of
need
when
is
measurement,
and
thethere is
smaller,
the
transition
for the
data transmission.
release
of radio resource
is
UE
URA_PCH
or Idle
alsotofaster,
but it also
willisbe
easier,
and
it
can
save
battery
easier to result in ping-pong
Function:
This
parameter
consumption,
but
it
may
adjustment
because
of the
This
parameter
indicates
the
indicates
theofmaximum
influence
user
fluctuations
traffic
volume;
Global
Access
Control
number
of of
thethis
congested
experience.
The
value
parameter
is
Information
Object
ID
calls
in
the
true
queue.
larger, it will be more
difficult
Related
successful
to triggerFactor:
Cell_DCH
call
rate,
access
time
->Cell_Fach based
ondelay
traffic
If
the
parameter
value
volume measurement, is
and
larger,
it will
theratio
influence
theimprove
utilization
successful
call rate but affect
of radio resources.
the access time delay.
If the parameter value is
smaller, it will improve the
access time delay but affect
the successful call rate.
The reason of the

to consider the time interval
of normal services.
The reason of the
The reason of the
experience and ping-pong
adjustment.
The reason of the
The reason of the
experiences and the risk of
call drops.
The reason of the
experience and ping-pong
adjustment.
is to try best to provide better
user reason
experience.
The
that the default
is because the RRC
connection setup process is
very fast, it doesn't influence
the user experience, and
there is no Cell Update in Idle
The
state.reason of the
experience.
The reason of the
At next use
At next use
At next use
At next use
At next use
At next use
At next use
At next use
Immediately
At next use
N/A
can not be
modified
The successful call rate and

the access time delay are
default value.
Immediately
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No

indicates the maximum time
length that the call can stay in
the true queue;
Related Factor: successful
Function:
This parameter
call rate, access
time delay
indicates
the maximum
If the parameter
value istime
length
service,
larger, that
it willthe
improve
thewhich
relocates
into
UTRAN,
successful call rate but can
affect
Function:
stay
in theThis
true
queue
the access
timeparameter
delay.
indicates
the maximum
Related
Factor:
successful
If the parameter
value istime
in
the
true
queue
when
call
rate,itaccess
time
delay
smaller,
will improve
the
Function:
This
parameter
service
be
forced
into
queue.
If
the
parameter
value
is
access
time
delay
but
affect
indicates
the forced
queue
Related
Factor:
successful
larger,
it
will
improve
the
the successful
rate. Even
switch
foraccess
AMRcall
service.
call
rate,
time
delay
successful
call
rate
but
affect
though
there
is
no
queue
Parameter
Function:
Switch
If
the
parameter
value
is
the
access
time
delay.
information
or
no queue
of
AMR
re-admission
larger,
ittraffic
will
improve
the
If
the
parameter
value
is
Function:
This
parameter
ability
in
the
AMR
RAB
after
AMR
rate
decrease.
successful
call
rate
but
affect
smaller,
it
will
improve
the
indicates
the
forced
queue
assignment
information,
the
Configuration
Rule:
the
access
time
delay.
access
time
delay
but
affect
switch
for
CS64k
service.
AMR
RAB
will
also
have
Turn
on
this
switch,
AMR
If
the
parameter
value
is the
the
successful
call
rate.
Even
though
there
is
no
queue
ability
if
the
AMR
service will
tryimprove
to access
smaller,
it will
the
queue
information
orisno
forced
queue
switch
again with
the
lowest
access
time
delay
but
affect
queue
ability
the the
CS64k
opened.
assigned
rateinafter
the
successful
callinformation,
rate.
RAB
assignment
Related
Factor:
the AMR bit
access
with
the maximum
This
parameter
the
CS64k
RABconfiguration
will
also
have
service
successful
rate,
rate
be
adopted.
Incall
this
way,
value
mustability
be less
than
or
the
queue
if
the
CS64k
the
differentiation
of
queue
AMR
service
has
equal
the
timer
of more
CNiswaiting
forced
queue
switch
ability
for
AMR
services
chance
to
setup
the call
for
RAB
response
opened.
If
the function is turned on,
successfully.
Related
Factor:
thehave
CS64k
the
RAB
will
TurnAMR
off this
switch,
afterthe
the
service
successful
call
rate,
queue
in any
case
so
accessability
with the
maximum
bit
the
of queue
that
the
rate ofthe
successful
call
ratedifferentiation
is adopt,
call
of AMR
ability
CS64k
services
will
be for
increased
but the
service
will
be failure.
If
the function of
is turned
differentiation
queue on,
ability
the
CS64k
RAB will
have
for AMR
services
can
not the
be
queue
ability in any case so
achieved.
that
rate ofissuccessful
If thethe
function
turned off,call
of
CS64k
will
be
the AMR RAB willincreased
not have
but
the differentiation
the queue
ability whenofthere
queue
ability
for CS64k
is
no queue
information
or no
Parameter
Function:
This
services
can
be
achieved.
queue ability
in the
AMR
RAB
parameter
is not
the
HSPA
If
the function
islevel
turned
off,
Function:
RNC
function
assignment
information
and
configuration
object
ID.
the
CS64k
RAB
switch
of F-DPCH
as the
result
the will
ratenot
of have
the
queue
ability
when
there
Configuration
Rule:
It
successful call will be should
is
no
information
or no
be
setqueue
to "Supported"
if the
decreased
but
differentiation
queue
ability
in
CS64k
operator
pay
forthe
thisAMR
feature.
of queue
ability
for
RAB
assignment
information
Adjustment
services
canSuggestion:
be achieved.
Function:
RNC
level
function
and
as
the
result
the
rate
of
Multiple HSDPA users
could
switch
Enhanced
F-DPCH
successful
callF-DPCH
of CS64k
use
theofsame
sowill
that
Configuration
Rule:
be decreased
but It should
more
code is saved.
be
set to "Supported"
the
differentiation
of queueif ability
operator
for thiscan
feature.
for CS64kpay
services
be
Function:
parameterMore
Adjustment
Suggestion:
achieved. This
indicates
whether
RNC
HSDPA users
could
multiplex
supports
to
activate
downlink
on the same E-F-DPCH
64QAM
andtoMIMO
at the
comparing
F-DPCH
same time.
Configuration Rule:
Function:
This
It should be
setparameter
to
indicates
whether
"Supported"
if the the
RNC
Function: Indicate
the function
period
to
re-assign
the
downlink
supports
activate
MIMO
and
to judge whether to re-assign
DPCH
channelization
code in
64QAM
at code.
the same time.
the
DPCH
HSDPA
cell is Rule:
supported or
Configuration
not.It
should
be
to is, the
The smaller the set
value
"Supported"
if
the
operator
shorter the interval is to judge
bought
feature. the
whetherthis
to re-assign
DPCH code.
The smaller the value is, the
longer the interval is to judge
whether to re-assign the
DPCH code.
Adjustment Suggestion: It
should be set to smaller value
if the HSDPA throughput
congestion is frequently
happened.

default value.
Immediately

default value.
Immediately

default value.
Immediately
Turn on this function switch,

AMR service has more
Immediately
chance to setup the call
successfully.
the AMR service successful
call rate and the
differentiation of queue ability
Immediately
for AMR services are
default
value.
the CS64k
service successful
call rate and the
differentiation of queue ability
Immediately
for CS64k services are
default value.
N/A
Can't Modify
N/A
Take effect for the

next call
N/A
Take effect for the

next call
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Function: This parameter is

the DTX/DRX switch
indicating whether DTX/DRX
is allowed to be used.
Configuration Rule: Open or
close DTX/DRX
function is
Function:
This parameter
according
to thefor
requirement
the DTX switch
nonof
the
operator.
realtime services indicating
whether DTX is allowed to be
used.
Configuration
According
Function:
ThisRule:
parameter
is
to
actual
requirement
thethe
DTX
switch
for nonof
the
operator.
realtime
services indicating
Function:
for real
time speech
whether DTX
is allowed
to be
services
indicating
whether
used.
DRX
is allowed
to beAccording
used.
Configuration
Rule:
The
switch
is only valid
to actual
requirement
ofwhen
the
RtDtxSwch
operator. is on. DRX
function can
UE's
Function:
for prolong
non-realthe
time
battery
DRX is
speech life.Because
services indicating
used
onlyDRX
when
DTX is used,
whether
is allowed
to be
the
DTX/DRX
can
used. The switch isreduce
only valid
uplink
interference.
when RtDtxSwch
is on. DRX
Configuration
Rule: According
function can prolong
the UE's
to
the actual
requirement
battery
life.Because
DRX of
is
the
operator.
used
only
when
DTX
is
used,
Function: This parameter is a
the
DTX/DRX
can reduce
switch
which indicates
uplink
interference.
whether HS-SCCH Less is
Configuration
Rule: by
According
allowed to be used
the
to
the actual requirement of
RNC.
the
operator. Rule: According
Configuration
to whether the operator has
Function:
This
is
purchased
the
HS-SCCH
The
function
ofparameter
this
HS-SCCH
Less
switch
for
Less license.
parameter:
This parameter
non-VoIP/AMR
services.
indicates whether
the RNC
Configuration
Rule:
According
supports the Downlink
to the actual
requirement
ofor
Enhanced
Layer
2 function
the
not.operator.
The involved factor for setting
this
parameter:
Layer2
Function:
This parameter
Enhancement
is
indicates whetherthe
thebasic
RNC
function for
HSPA+
supports
thealluplink
enhanced
functions.
So theordefault
layer 2 function
not.
value
is
Supported.
Related Factor: CellAnd
HSPA+
function activation
throughput.
does
not
depend
on this
The uplink
enhanced
layer 2
parameter's
value.
Function:
RNC
level
function can improvefunction
the cell
switch
of 64QAM It's
uplink throughput.
Configuration
Rule:
suggested to be
set Ittoshould
be
set to "Supported"
if the
"support"
as soon as the
operator
pay
for this feature.
equipment
supports.
Adjustment
Suggestion:
Function: RNC
level function
Supporting
this
switch of MIMO function will
increase
the HSDPA
Configuration
Rule: It should
throughput.
be
set
to
"Supported"
Parameter
Function: Itifisthe
the
operator
for this
feature.
switch of pay
HSDPA
GBR
Adjustment
Suggestion:limit
resource consumption
Supporting
this
function will
function.
increase
the
HSDPA
Configuration Rule:
throughput. the cell capacity,
Considering
if there is a need to limit the
resource consumption of
HSDPA GBR service, the
switch should be turned on.
Considering the quality of
HSDPA GBR services, the
switch should be turned off.
Default value is "Closed",

which should be adjusted
according to the requirement
of the operator.
At next use (i.e.,

shall not affect
ongoing
connections)
According to the actual

requirement of the operator.
At next use (i.e.,

shall not affect
ongoing
connections)
DTX switch for non-realtime

services is closed by default,
which should be adjusted
At next use (i.e.,

shall not affect
ongoing
connections)

At next use (i.e.,

shall not affect
ongoing
connections)
DTX/DRX switch for nonrealtime services is closed by

default, which should be
actual requirement of the
operator.
HS-SCCH Less is closed by
default, which should be
adjusted if the operator has
purchased the HS-SCCH
Less license.
If
cell supporting
Enhanced
According
to the actual
Layer
2
function
or
DL
Enhanced CELL_FACH
existed in the RNC, this
parameter must be set to
"open"; else, this parameter
can be set to "open" or
"closed"; Enhanced Layer 2
function can improve the cell
Iub throughput and
suggested to be set to
"support"
as soon as the
N/A
equipment supports.
At next use (i.e.,

shall not affect
ongoing
connections)
At next use (i.e.,
shall not affect
ongoing
connections)
At next use (i.e.,
shall not affect
ongoing
connections)
New CAC
(Service Setup,
handover or
Service
reconfiguration
New connection
or new radio link
N/A
Take effect for the

next call
N/A
Take effect for the

next call
Avoiding affecting the quality

of HSDPA GBR services in
Immediately
the beginning, the switch is
closed.
No
No
Yes
Yes
No
No
No
No
No
No
No
Yes
signalling and service.

This parameter
the
(Flexible
Size orindicates
Fixed Size)
support
type of
RLCfor
PDU
size
The involved
factor
setting
format
for
signalling
and
this parameter: UE capability;
service.For
traffic, Flexible
traffic performance
Size
can
reduce
the MAC
head
cost
and
improve
the
Function
of
this
parameter:
theit
Iub throughput;
Foractivating
signalling,
indicates
whether
support
type
of RLC
PDU size
Fixed
Size
is suggested
to
Dual
Cell
MIMOand
at the
format
forand
signalling
use
for
little
MAC
head
cost.
same
time
in
the
RNC.
service.For traffic, Flexible
Suggestion
for setting
thisthe
Factors
consideration:
Size canofreduce
the MAC
parameter:
This
parameter
network
layout,
the
HSDPA
head cost and improve the
indicates
the
type of
throughput
ofsupport
UE
Iub throughput;
For signalling,
RLC PDU
size
formatisfor
When
the parameter
set
Fixed
Size
is suggested
to to
The
function
of
this
signalling
and
service.
Traffic
"Supported",
RNC
supports
use for
little
MAC
head
cost.
parameter:
parameter
is
suggested
set
to Flexible
the
functionThis
oftoactivating
Suggestion
for
setting
thisDual
indicates
whether
Dual-Cell
Size,
for
Flexible
Size
can
Cell
and
MIMO
at
the
same
HS-DSCH
is
supported
and
reduce
the
MAC
head
cost
time
in the
radio
link
setup
or
Parameter
Function:
This
indicates
the
support
type
of
should
be
set
according
to
and
improve
the
Iub
reconfiguration,
this
will
parameter
indicates
the
RLC PDU size format for
whether
the
DC
Function
is
throughput;
For
signalling,
increase
the
HSDPA
power
offset
relative
to Traffic
2ms
signalling
and
service.
open
or
not.
Fixed
Size
is
suggested
to
throughput
UE,
TTI
E-HICHofinto
single
is suggested
setotherwise,
tolink
Flexible
The
involved
factor
forE-HICH
setting
use
MAC
head
cost.
RNC
does
not
support
the
condition
for
2ms
TTI
Size,for
forlittle
Flexible
Size
can
this
parameter:
whether
(Flexible
Size
is
only
for
function.
of
serving
RLS
inDualreduce
theE-DCH
MAC head
cost
Parameter
Function:
This
Cell
HS-DSCH
is
supported
in
traffic,
and
signalling
can
only
RncMIMOInd
indicates
macro
diversity
condition.
and improve
the Iub thethe
parameter
indicates
this
use cell.
Fixed
Size
insignalling,
3GPP
RNC
supports
the
MIMO
Configuration
Rule:
This
throughput;
For
power
offset
relative
to 10ms
Influence
parameter:
Release
9ofor
later.)
function
and
DcHsdschSptInd
parameter
should
ensure
Fixed
Size
isthis
suggested
TTI
E-HICH
in
single
linktothe
This
parameter
indicates
indicates
the
RNC
supports
power
of
serving
E-DCH
RLS
use
for
little
MAC
head
cost.
condition
for 10msHS-DSCH
TTI Ewhether
Dual-Cell
Dual
Cell
function,
but
both
E-HICH
(for
2ms
TTI)
large
(Flexible
Size
is
only
for
HICH
of serving
RLS
Parameter
Function:
This
is
supported
andE-DCH
should
the
twoand
parameters
set
tobe
enough
todiversity
satisfy
the
traffic,
signalling
can
only
in
macro
condition.
parameter
indicates
the
set
according
to
whether
support
dorequirement
notRule:
means
thethe
cell
minimum
for
Euse Fixed
Size
in 3GPP
Configuration
This
power
offset
relative
to
2ms
DC
Function
is
open
or
not.
can
active
the
MIMO
and
HICH
(MISS
ACK
equal
or
Release
9
or
later.)
parameter
should
ensure
TTI
E-HICH
in
single
link
Suggestion
setting
thisthe
Dual
Cell
ininfor
the
radio
link.
below
5%
3GPP
25.101
power
of
serving
E-DCH
RLS
condition
2ms
TTI HSE-HICH
parameter:
Dual-Cell
protocol)
.for
And
it also
needs
E-HICH
(for
10ms
TTI)
large
Parameter
Function:
This
of
non-serving
RLS in
DSCH
Support
Indication,
to
consider
the E-DCH
system
enough
to adjustable.
satisfy
thethe
parameter
indicates
macro
diversity
condition.
and is not
capacity.
minimum
requirement
Epower
offset
relative
tofor
10ms
Configuration
Rule:
This
If
this
parameter
isequal
too
small,
HICH
(MISS
ACK
or
TTI
E-HICH
in
single
link
parameter
should
ensure the
the
minimum
requirement
below
5%
in 3GPP
25.101
condition
for
10ms
TTI
E- for
power
of
non-serving
E-DCH
E-HICH
performance
could
protocol)
. And
it also
needs
HICH
of non-serving
RLS
E-HICH
(for
2msE-DCH
TTI)
not
be
satisfied.
Parameter
Function:
This
to
consider
the
system
RLS
in
macro
diversity
large
enough
to
satisfy
the it
If
this parameter
is too
big,
parameter
indicates
the
capacity.
condition.
minimum
requirement
forand
Ewould
waste
the
power,
power
offset relative
to small,
2ms
If
this parameter
isequal
too
Configuration
Rule:
This
HICH
(MISS
ACK
or
affect
the system
capacity.
TTI
E-RGCH
in
single
linkthe
the
minimum
requirement
for
parameter
should
ensure
below
5% in
3GPP
25.101
condition
for
2ms
TTI
EE-HICH
performance
could
power
of
non-serving
E-DCH
protocol) . And it also needs
RGCH
of serving
E-DCH
RLS
not
be
satisfied.
RLS
E-HICH
(for
10ms
TTI)
Parameter
Function:
This
to consider
the
system
in
macro
diversity
If this
parameter
iscondition.
too
large
enough
to satisfy
the it
parameter
indicates
thebig,
capacity.
Configuration
Rule:
This
would
waste
the
power,
and
minimum
requirement
Epower
offset
relative
tofor
10ms
If this parameter
is too
small,
parameter
should
ensure
affect
the
system
capacity.
HICH
(MISS ACK
equal
orthe
TTI
E-RGCH
in
single
link
the minimum
requirement
for
power
ofperformance
serving
E-DCH
below
5%
in 3GPP
25.101
condition
for
10ms
TTI
E-RLS
E-HICH
could
E-RGCH
2ms
TTI)needs
large
protocol)
And
it also
RGCH
of .(for
serving
E-DCH
not be satisfied.
Parameter
Function:
ThisRLS
enough
to
satisfy
the
to
consider
the
system
in
macro
diversity
condition.
If this parameter
is too
big, it
Parameter
Function:
This
parameter
indicates
the
minimum
requirement
forand
Ecapacity.
Configuration
Rule:
This
would
waste
the
power,
parameter
indicates
whether
power
offset
relative
to
10ms
RGCH
(MISS
UP
equal
or
If
this
parameter
iscapacity.
small,
parameter
should
ensure
the
affect
theupdating
system
dynamic
oftoo
E-AGCH
TTI
E-RGCH
in single
link
below
5%
in 3GPP
25.101
the
minimum
requirement
for
of
serving
E-DCH
RLS
power
offset
is
needed
or
not.
condition
for
E-RGCH
of nonprotocol)
.(for
And
it also
needs
E-HICH
performance
could
E-RGCH
10ms
TTI)
large
Configuration
Rule:
It
needs
serving
E-DCH
RLS in macro
to
consider
the
not
be satisfied.
enough
to
satisfy
the
to
consider
the system
HSUPA
diversity
condition.
capacity.
If
this parameter
is too
big,E-it
minimum
requirement
for
service
quality
and
system
Configuration
Rule:
This
If
this parameter
isequal
too
small,
would
waste
the
power,
and
RGCH
(MISS
UP
or
capacity,
and
it
also
needs
to
parameter
should
ensure
the
the
minimum
requirement
for
affect
the
system
capacity.
below
5%
in
3GPP
25.101
consider
the
Iub
power
of non-serving
E-DCH
E-RGCH
could
protocol)
.performance
And(for
it also
needs
reconfiguration.
RLS
E-RGCH
10ms
TTI)
not
be
satisfied.
tothe
consider
system
If
switchthe
istoon,
E-AGCH
large
enough
satisfy
the
If
this parameter
is too big, it
capacity.
Power
Offset
is eagchPOTti2
minimum
requirement
forand
Ewould
waste
the
power,
If
this
parameter
is tooequal
small,or
(2ms
TTI)
or eagchPOTti10
RGCH
(MISS
DOWN
affect
the
capacity.
the
minimum
requirement
for
(10ms
TTI)system
single
radio link
below
5%
inin3GPP
25.101
E-RGCH
performance
could
condition,
and
eagchPOTti2
protocol) . And it also needs
not
beTTI)
satisfied.
(2ms
+MacroDivGain
or
to consider
the system
If this parameter
is tooTTI)
big, it
eagchPOTti10
(10ms
capacity.
would
waste thein
power,
and
+MacroDivGain
If this parameter
isDCH
too small,
affect
the
system
capacity.
macro
diversity
condition. In
the minimum
requirement
for
this
way, the
HSUPA service
E-RGCH
performance
could
quality
and system capacity
not be satisfied.
all
are
good.
Where,
If this parameter
is too big, it
MacroDivGain
is power,
macro and
would waste the
diversity
of downlink
affect thegain
system
capacity.
dedicated channel, the value
his parameter indicates the

support type of RLC PDU
size format for signalling and
service. Traffic is suggested
to set to Flexible Size, for
Flexible
Size can
reducethe
the
his parameter
indicates
MAC head
and improve
support
typecost
of RLC
PDU
the
throughput;
For and
sizeIub
format
for signalling
signalling,
Fixed
Size
is
service. Traffic is suggested
suggested
to
use
for
little
to set to Flexible Size, for
MAC
head
cost.
Flexible
Size
can(Flexible
reduce the
Size
is
only
for
and
MAC head costtraffic,
and improve
signalling
can only use
the
Iub throughput;
For Fixed
Size
in 3GPP
Release
signalling,
Fixed
Size is9 or
later.)
suggested to use for little
MAC head cost. (Flexible
Size
is only for traffic,
The equipment
is one and
signallingitcan
only
Fixed
antenna,
does
notuse
support
Size
MIMOin 3GPP Release 9 or
later.)
The default value can satisfy
the minimum requirement for
E-HICH performance
described in 3Gpp 25.101
protocol. And it has
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered the system
capacity.
Switch off the E-AGCH power
offset dynamic updating
function can reduce the Iub
reconfiguration.
New service
setup or
reconfiguration
New connection
Immediately
Immediately
Soft handover
happen
Soft handover
happen
Next radio link
addition request
or next radio link
re-configuration
request when soft
handover
Next radiohappen.
link
addition request
or next radio link
re-configuration
request when soft
handover happen.
Soft handover
happen
Soft handover
happen
Next radio link
addition request
or next radio link
re-configuration
request when soft
handover happen.
Immediately
No
No
No
No
No
No
No
No
No
Function: The parameter

indicates the period to judge
whether to adjust the EAGCH and E-RGCH/HICH
number.
Configuration Rule:
Parameter
Function:
This
If it is too long,
the E-AGCH
parameter
indicates
the
and
E-RGCH/HICH
number
Function:
Indicator
for
quantified
E-DPCCH/DPCCH
can not be
adjusted
in time.
Whether
to
Judge
Event
1F
power
offset
configured
for
If
it is too
short,
frequent
ECondition
When
the
Service
10ms
E-TTI.E-RGCH/HICH
AGCH
is
Setupand
on HSPA
Configuration
Rule: This
Parameter
Function:
This
number
adjustment
will
take
Configuration
Rule:
According
parameter
value
isresource
configured
parameter
indicates
the
too
much
system
to
experiences
, the detect
to
ensure
the
missed
quantified
E-DPCCH/DPCCH
such
as CPU.
recommended
valueand
is 0,avoid
not
rate
less
than
0.2%
power
offset
configured
for
judge
this
condition,
it can
generating
unnecessary
2ms
E-TTI.
reduce
the times of channel
power
waste.
Configuration
Rule: This
switching.
If
this parameter
is configured
too big, Eparameter
value is
DPCCH
power
would
be too
to ensure the missed detect
big, miss
detect
rateand
would
be
rate
less
than
0.2%
Parameter
Thisavoid
small,
but itFunction:
would generating
generating
unnecessary
parameter
indicates
the
unnecessary
interference,
power
waste.
power
offset
for
scheduling
and
the system
If
thisreduce
parameter
too E-TTI.
big, Einformation
whenis2ms
capacity.
DPCCH
power
would
be
too
Configuration
Rule:
The
value
If
themiss
parameter
is too
small,
big,
detect
rate
would
Parameter
Function:
This
of
this
parameter
is
used
tobe
E-DPCCH
would
small,
but
itpower
would
generating
parameter
indicates
the be
ensure
the
2ms
TTI
too
small,
thefor
miss
detect rate
unnecessary
interference,
power
offset
scheduling
scheduling
information
be
will
be
too
big,
service
quality
and
reduce when
the
system
information
10ms
Edemodulated
rightly,
and
requirement
can not be
capacity.
TTI.
avoiding
unnecessary
power
Parameter
Function: This
satisfied.
If
the parameter
is too
Configuration
Rule:
The
value
waste.
parameter
indicates
thesmall,
E-DPCCH
power
would
be
of
this
parameter
is
used
toit
If
this
parameter
is
too
big,
too
small,
the
miss
detect
ensure
the
10ms
TTI
will
waste
power,
and
reduce
ACK domain relative to rate
will
too
big,
service
scheduling
information
the be
system
capacity.
DPCCH
when
UE
has quality
abe
requirement
can
not
be
demodulated
rightly,
and
If
this
parameter
is
too
small,
single
link
or
is
in
the
intraParameter
Function: This
satisfied.
avoiding
unnecessary
power
the
scheduling
information
will
NodeB
handover.
parameter
indicates the ACKwaste.
not
be
demodulated,
and
Configuration
Rule:
The
NACK
repetition factor,
If
this parameter
isquality.
too big, it
affect
the service
parameter
value
is
configured
indicating
the
number
of
will
waste
power,
and
reduce
to satisfy therepetitions
requirement
consecutive
of of
the
the
system
capacity.
probability
of right receive and
ACK
and
NACK.
If
this parameter
is too small,
system
capacity.
Configuration
Rule:
It needs
the
scheduling
information
If
the
parameter
value is toowill
to
consider
the
system
not
beitdemodulated,
and
large,
would
waste the
capacity
and
service
quality.
affect
the
service
quality.
uplink
power, increase
the UL
If the ACK-NACK
repetition
interference
and ACK
reduce
factor is tooFunction:
big,
or the
Parameter
This
UL
capacity
ofdata
cell. feed
NACK
of new
parameter
indicates
the back
If
the
parameter
value
is too
to network
would
be reduced,
power
offset
of HS-DPCCH
small,
it
would
affect
the
and it would
affect
the system
NACK
domain
relative
to
receiving
quality
the aHScapacity.when
DPCCH
UEofhas
DPCCH
ACK
If
the ACK-NACK
Repetition
single
link
or isdomain.
in the
intraFactor ishandover.
too small, probability
NodeB
of ACK or NACK
be The
decoded
Configuration
Rule:
rightly would
be small,
and it
parameter
value
is configured
would
affect
service of
to
satisfy
thethe
requirement
quality.
probability
of right receive and
system capacity.
If the parameter value is too
large, it would waste the
uplink power, increase the UL
interference and reduce the
UL capacity of cell.
small, it would affect the
receiving quality of HSDPCCH NACK domain.
12 seconds can satisfy the

HSUPA service requirement
and will not change the EAGCH and E-RGCH/HICH
number too frequently.
The reason of the
to reduce the times of
channel switching.
parameter satisfy the
requirement of the missed
detect rate less than 0.2%,
and generate minimum
interference.
interference.
the system capacity and
service quality.
service quality.
The default value satisfy the
requirement of P (Ack>Nack/Dtx)<1%, where P
(Ack->Nack/Dtx)= (UE_ackNodeB_ack)/UE_ack. And
the uplink interference is
small.
service quality.

small.
Take effect after

the change is
loaded to the
RNC
At next use
Next Radio Link
Setup Request or
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Link Reconfiguration
Request
New connection
New connection
Next Radio Link
Setup Request or
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Request
Next Radio Link
Setup Request or
Next Radio Link
Addition Request
or Next Radio
Request
No
No
No
No
No
Yes
Yes

parameter indicates the CQI
feedback cycle.
Configuration Rule: Configure
CQI Feedback Cycle
according to the impact to
downlink throughput and
uplink interference because
of different CQI Feedback
Cycle.
CQI Feedback Cycle and CQI
Repetition Factor determine
the time of same CQI to be
feed back.
If the CQI Feedback Cycle is
too big, UE would wait long
time to send the new CQI, the
HSDPA scheduling would be
not exact, and it would affect
the
downlink
throughput.
Parameter
Function:
This
If
the
CQI
Feedback
Cycle is
too
small,
theofCQI
would
power
offset
HS-DPCCH
more
likely
to
reflect
the
CQI domain relative to
actual
quality
of
the
channel,
DPCCH when UE has a
and
thelink
HSDPA
single
or is inscheduling
the intrawould
be
more
exact, but it
NodeB
handover.
Parameter
Function:
This
would
generate
more
uplink
Configuration
Rule:
The
parameter
indicates
the
CQI
interference.
parameter
value is configured
repetition factor.
to
make sure that
the
HSConfiguration
Rule:
Configure
DPCCH
CQI domain
CQI
Repetition
Factorcan be
received
avoid
accordingrightly
to theand
impact
to
generating
unnecessary
HSDPA service quality
power
waste.
because
of different CQI
The
parameter
value is
Repetition Factor.
configured
to
satisfy
Parameter
Function:
This
CQI Feedback Cyclethe
and CQI
requirement
of probability
parameter
indicates
the E-of
Repetition
Factor
determine
right
receive,
coverage
and
DCH
reference
power
offset.
the time
of same
CQI to
be
system
capacity.
It
is
used
to
estimate
the
feed back.
If
is configured
uplink
loadRepetition
increase
caused
If the
the parameter
CQI
Factor is
too
large,
more
interference
by
the
MAC-e
PDUs
which
too big, UE would wait
long is
Parameter
Function:
This
will
be
generated
and
the
not
decoded.
Function:
HSDPA
and
time to send the new CQI, the
parameter
TPC
error
rate
capacity
willisbe
reduced.
Configuration
Rule:
It needs
compressed
mode
can
be
HSDPA scheduling
would
be
used
for
F-DPCH
OLPC.
If
the
parameter
is
configured
to
theitsystem
activated
or
notconsider
exact,simultaneously
and
would affect
Configuration
Rule:
Itquality.
needs
too
the
qualityquality.
of
the
capacity
and
service
not
the small,
HSDPA
service
to
consider
uplink
channel
receiving
will
be
bad.
The
bigger
this
parameter
Configuration
Rule: cell
If the CQI Repetition
Factoris,is
quality
and
system
downlink
the
bigger
E-DPDCH
power,
capability,
UE
capability,
too small, the probability
of
capacity.
and
less system
capacity.
performance
CQI the
be decoded
rightly
would
If
parameter
value
is
toois,
smaller
this
parameter
The
value
'Serial
'means
bethe
small,
itofalso
would
affect
large,
F-DPCH
TPC
error
rate
the
smaller
E-DPDCH
power,
that
compressed
mode
and
the
HSDPA
service
quality.
Function:
HSUPA
and
would
be
high,
it
would
affect
and
the
worse
quality
of
the
HSDPA
can not
be can
activated
compressed
mode
be
uplink
channel
quality.
service.
simultaneously.
HS-DSCHor
activated
simultaneously
If the parameter
is too
needs
to fall backvalue
to DCH
not
small,
the
F-DPCH
power
before
the
initiation
of
Configuration
Rule:
cell
would
be too mode,
big,
it would
compressed
which will
capability,
UE
capability,
reduce
theHSDPA
systemthroughput.
downlink
influence
throughput
capacity.
The
'means
The value
value of
of 'Parallel
'Serial 'means
that
that compressed
compressed mode
mode and
and
HSDPA
HSUPA can
can be
notactivated
be activated
simultaneously.
simultaneously. EDCH needs
Adjustment
Suggestion:
to fall back to
DCH before the
HSDPA
and
compressed
initiation of compressed
mode activation
relied on
mode,
which willare
influence
Nodeb
ZTE
HSUPAcapability,
throughput.
support
parallel
procedure,
so
The value
of 'Parallel
'means
this
parameter
will
not
be
that compressed mode and
adjusted.
HSUPA can be activated
simultaneously.

uplink interference.

requirement of probability of
right receive, coverage and
system capacity.
parameter can satisfy the
requirement of HSDPA
service quality.
service quality.
uplink channel quality and
system downlink capacity.
Next Radio Link

Setup Request or
Next Radio Link
Addition Request
or Next Radio
Request
Next Radio Link

Setup Request or
Next Radio Link
Addition Request
or Next Radio
Link
Next ReRadio Link
configuration
Setup Request or
Request
Next
Radio Link
Addition Request
or Next Radio
Link
Next ReRadio Link
configuration
Setup Request or
Request
Next
Radio Link
Addition Request
or Next Radio
Request
Immediately
Cell capability, UE capability,

and throughput are taken into At next use
account in default value.
Cell capability, UE capability,

and throughput are taken into At next use
No
No
No
No
No
No
No
Yes
No
No
No
No

ACK
domain
relative This
to
Parameter
Function:
DPCCH
when
UE
is
in
parameter indicates theinterNode
handover.
powerBoffset
of HS-DPCCH
Configuration
Rule: The
CQI domain relative
to
parameter
value
DPCCH when UEisisconfigured
in interto
satisfy
the requirement of
NodeB
handover.
probability
of right
Configuration
Rule:receive
The and
system
capacity.
parameter value
is configured
Parameter
Function:
This
If the
parameter
is too
to
ensure
that
thevalue
HS-DPCCH
parameter
indicates
the
large,
it would
waste
the
CQI
domain
can
be
received
power
offset ofincrease
HS-DPCCH
uplink
power,
the UL
rightly
and
avoid
generating
NACK
domain
relative
tothe
interference
and
reduce
unnecessary
power
DPCCH
when
is waste.
in interUL
capacity
of UE
cell.
The
parameter
value
is
Node
B
handover.
If
the parameter
value
is too
configured
to satisfy
the
Configuration
Rule:
The
small,
it
would
affect
the
requirement
of
probability
of
Function:
interval
parameter
value of
isbetween
configured
receiving
quality
the
HSright
receive,
coverage
and
hspa
service
change.The
to
satisfy
the cell
requirement
of
DPCCH
ACK
domain.
system
capacity.
parameter
is used
to avoidand
probability
of
right receive
If
the parameter
is configured
ping-pong
HS service
cell
system
capacity.
too
large,
more
interference
change.
will beitgenerated
and
the
Configuration
the
risk of
large,
would Rule:
waste
the
capacity
will
be
reduced.
ping
handover,
uplinkpong
power,
increase
the UL
If
the parameter
configured
throughput
interference
and is
reduce
the
too
small,
the
quality
of the
The
value
is
higher,
UL capacity of cell. HSPA
receiving
willchange
be bad.
serving
cell
is slower,
If the parameter
value
is too
which
may
impact
the
small, it would affect the
throughout,
on the
receiving quality
of contrary,
HSthe
value
is
smaller,
hs
DPCCH
NACK
domain.
Function: The parameter
serving
change
is faster,
Function:
The
parameter
indicatescell
the
time
unit
of
which
maythe
lead
to ping-pong
indicates
period
in ms to
CodeUptPrd.
HSPA whether
serving cell
change.
judge
to adjust
the
HS-PDSCH number.
Configuration Rule:
If
it is too long,
the HSFunction:
The parameter
PDSCH
number
caninnot
be
indicates the period
second
adjusted
in time. to adjust the
to
judge whether
If
it is too short,
frequent HSHS-PDSCH
number.
Function:
Maximum
Bit Rate
PDSCH
number
adjustment
Configuration
Rule:
Parameter
Function:
This
of
HSDPA
Across
Iur
Interface
will
take
too
much
system
If
it is too long,
the HSparameter
indicates
the
Configuration
Rule:
It
needs
resource
such
as
CPU.
PDSCH
number
can
be
allocation
method
for not
HSPA
to
consider
the
user
adjusted
in time.
total
power.
experience.
If
it is too short,
frequent HSConfiguration
Rule:
Iur
interface
does
not inform
PDSCH
number
adjustment
RNC
dynamic bit
assigning
the
maximum
rate
of
will
take
too
much system
mode
is traffic
a
method
of
HSDPA
to
DRNC.
To
resource
such
as CPU.
assigning
HSDPA
total
power
add this parameter
is used
by
by RNC,
Node and
B doadjust
not
DRNC
to and
calculate
need
to allocate
the power
the maximum
available
code
itself.
resource of HS-PDSCH.
Parameter
Function:
This
NodeB
assigning
mode
can is
The value
of
the parameter
parameter
indicates
the
make
full
use
of
power
larger, the maximum bit rate
quantified
E-DPCCH/DPCCH
resource
best
effort.Iur
of HSDPAwith
traffic
across
power
offset
configured
for
interface is higher,
and the
10ms
TTI
Common
E-DCH.
HSDPA user experience is
Configuration
This
Parameter
This to
better, but itFunction:
isRule:
also easier
parameter
value
is
configured
parameter
is
the
common
indicates
influence R99
user the
to
ensure
the
missedobject
detectID.
EDCH
configuration
quantified
E-DPCCH/DPCCH
experience.
rate
less
than
0.2%
and
avoid
power
offset
configured
for
The value of the parameter
is
generating
unnecessary
2ms
TTI the
Common
E-DCH.
smaller,
maximum
bit rate
power
waste.
Configuration
Rule:
ThisIur
of HSDPA
traffic
across
If
this
parameter
isthe
tooHSDPA
big, Eparameter
configured
interface isvalue
lower,is
DPCCH
power
would
be
too
to
ensure
the missed
detect
user
experience
is worse.
big, miss
detect
rateand
would
be
rate
less than
0.2%
avoid
small,
but itunnecessary
would generating
generating
unnecessary
power waste. interference,
and
the system
If thisreduce
parameter
is too big, Ecapacity.
DPCCH power would be too
If
themiss
parameter
is too
small,
big,
detect rate
would
be
E-DPCCH
be
small,
but itpower
wouldwould
generating
too
small, theinterference,
miss detect rate
unnecessary
will
be
too
big,
and reduce theservice
systemquality
requirement
can
not be
capacity.
satisfied.
E-DPCCH power would be

small.
system
capacity.
The default
value satisfy the
small.
The risk of ping pong
handover and throughput are
taken into account in default
value.
It is enough to change the
HS-PDSCH number on a
second level.
2 second can satisfy the
HSDPA service throughput
requirement and will not
change the HS-PDSCH
2 second can satisfy the
HSDPA service throughput
requirement and will not
change the HS-PDSCH
Next inter-NodeB
handover
Next inter-NodeB
handover
Next inter-NodeB
handover
At next use
Take effect after

the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
NodeB assigning mode can

make full use of power
resource with best effort.
Immediately
The reason of the

experience of R99 and
HSPA.
Immediately
N/A
Can't Modify

interference.
interference.
Immediately
Immediately
No
No
No
No
No
No
No
No
No
No
No
No

information when 2ms TTI
Common E-DCH.
Configuration
Rule: The
Parameter Function:
Thisvalue
of
this
parameter
is
used
parameter indicates the to
ensure
the 2ms
TTI
power offset
for scheduling
scheduling information
information
when 10msbe
TTI
demodulated
rightly, and
Common E-DCH.
avoiding
unnecessary
power
Parameter
Function:
This
Configuration
Rule: The
value
waste.
parameter
indicates
the
of this parameter is used to
If
this parameter
is
too big, it
power
offset
of HS-DPCCH
ensure
the 10ms
TTI
will
waste
power,
and
reduce
ACK
domain
relative
to
scheduling information
be
Parameter
This
the system
capacity.
DPCCH
forFunction:
common
E-DCH
demodulated
rightly, and
parameter
indicates
the
ACKIf
this parameter
is too
small,
transmission.
avoiding
unnecessary
power
NACK
repetition
factor
for
the
scheduling
information
will
Configuration
Rule:
The
waste.
common
E-DCH
not
be
demodulated,
and
parameter
value
is
configured
If this parameter is too big, it
transmission,
indicating
the
affect
the the
service
quality.
to
requirement
of
willsatisfy
waste
power,
and
reduce
number
of
consecutive
probability
of
right
receive
and
the system capacity.
repetitions
of the is
ACK
and
system
capacity.
If
this
parameter
too
small,
Parameter
Function:
NACK.
If
the
parameter
valueThis
is toowill
the
scheduling
information
Parameter
Function:
This
parameter
indicates
Configuration
Rule:
Itthe
needs
large,
it
would
waste
the
not
be
demodulated,
and
parameter
indicates
the CQI
power
offset
ofincrease
HS-DPCCH
to
consider
the
system
uplink
power,
the UL
affect
the
service
quality.
feedback
cycle
for
common
NACK
domain
relative
tothe
capacity
andand
service
quality.
interference
reduce
E-DCH
transmission.
DPCCH
for common
E-DCH
If
the
ACK-NACK
UL
capacity
ofRule:
cell.repetition
Configuration
Configure
transmission.
factor
is
too
big,
ACK
If
theFeedback
parameterCycle
valueoris too
CQI
Configuration
Rule:
The
NACK
of
new
data
feed
back
small,
it would
affect
theto
according
to
the
impact
parameter
value
is
configured
to
networkquality
wouldofbethe
reduced,
receiving
HSdownlink
throughput
and
to
satisfy
the
requirement
of
Parameter
Function:
This
and
it would
affect
the
system
DPCCH
ACK
domain.
uplink
interference
because
probability
of
right receive
parameter
indicates
the and
capacity.
of
different
CQI
Feedback
system
capacity.
power
offset
of HS-DPCCH
If the
ACK-NACK
Repetition
Cycle.
If
the
parameter
value
is too
CQI
domain
relative
to
Factor
is
too
small,
probability
Parameter
Function:
This
CQI
Feedback
Cycle
and CQI
large,
it
would
waste
the
DPCCH
for
common
E-DCH
of
ACK
or
NACK
be
decoded
parameter
indicates
the CQI
Repetition
Factor
determine
uplink
increase
the UL
transmission.
rightly power,
would
be
small,
and
it
repetition
factor
for
common
the
time
of
same
CQI
to
be
interference
and
reduce
Configuration
Rule:
The
would affect
the service the
E-DCH
transmission.
feed
back. value
UL
capacity
ofRule:
cell.
parameter
is configured
quality.
Configuration
Configure
If
the
CQI
Feedback
If
the
parameter
value
is toois
to
make
sure
that
theCycle
HSCQI
Repetition
Factor
too
big,
UE
would
wait
long
small,
it would
affect
the
DPCCH
CQI
domain
can
according
to the
impact
tobe
time
to
send
the
new
CQI,
the
receiving
quality
of
HSreceived
rightly
and
avoid
enhanced
CELL_FACH
HSDPA
scheduling
would
be
DPCCH
NACK
domain.
generating
unnecessaryof
service
quality
not
exact,
and itbecause
would affect
power
waste.
different
CQI
Repetition
the
downlink
throughput.
The
parameter value is
Factor.
If
the CQI Feedback
Cycle is
configured
to satisfy
the
CQI
Feedback
Cycle
and CQI
Parameter
Function:
This
too
small,
the
CQI
would
requirement
of probability
of
Repetition
Factor
determine
parameter
more
likely indicates
to coverage
reflect the
theand
right
receive,
the
time
of
same
CQI
to be
common
E-DCH
reference
actual
quality
of the
channel,
system
capacity.
feed
back.
power
offset.
It
is
used
to
and
the
HSDPA
scheduling
If
the
is configured
If
the parameter
CQI
Repetition
Factor
estimate
the
uplink
load
would
be
more
exact,
but
it is
too
large,
more
interference
too
big,
UE
would
wait
long
increase
caused
by
the
MACwould
generate
more
uplink
Parameter
Function:
This
will
be
and
the
time
to generated
send
the
new
CQI,
the
e
PDUs
which
is
not
decoded.
interference.
parameter
isbe
F-DPCH
TPC
capacity
will
reduced.
enhanced
CELL_FACH
Configuration
Rule:
It needs
error
target
for
common
If the rate
parameter
isbe
configured
scheduling
would
not
to
consider
thequality
system
E-DCH
transmission.
too
small,
the
of the
Function:
This
parameter
exact,
and
it
would
affect
the
capacity
and
service
quality.
Configuration
Rule:
It
needs
receiving
will
be
bad.
indicates
whether
the
MAC-d
enhanced
CELL_FACH
The
bigger this
parameter
is,
to
consider
uplink
channel
flow
carrying
DTCH
and
the
service
quality.
the
bigger
E-DPDCH
power,
quality
and
system
downlink
MAC-d
flow
carrying
DCCH
If
thethe
CQI
Repetition
Factor is
and
less
system capacity.
capacity.
are
allowed
to
be
multiplexed
too small,
thethis
probability
of
The
smaller
parameter
If
the
parameter
value
iswould
toois,
in
the
same
MAC-i
PDU
when
CQI
be
decoded
rightly
the
smaller
E-DPDCH
power,
large,
F-DPCH
TPC
error
rate
common
E-DCH
is used.
be
small,
it alsoquality
would
and
thebeworse
ofaffect
the
would
high,
it
would
affect
Configuration
the
enhanced Rule:
CELL_FACH
service.
uplink
quality.
Function:
This
Considering
theparameter
rate of the
servicechannel
quality.
If the parameter
value is
too
indicates
theand
common
E-DCH
DTCH
data
uplink
small,
the F-DPCH
power
transmission
time interval
interference.
would
beand
too
big, B
it would
used
when
Node
and
If DTCH
DCCH
are UE
reduce
the
system
downlink
both
support
2ms
E-TTI.
allowed to be in one
MAC-i
capacity.
Configuration
Rule:
PDU, DTCH can
be According
sent out
to
user
throughput,
delay and
more
quick,
at the expense
of
uplink
interference.
more uplink
interference. If
2ms
E-TTI
provide
higher
DTCH
and can
DCCH
are not
user
throughput
or lower
allowed
to be in one
MAC-i
delay
cancan
bring
PDU, but
DTCH
bemore
sent out
uplink
interference.
10ms Eslower and less uplink
TTI
can provide
less user
interference
is produced.
throughput or higher delay but
can bring less uplink
interference.

service quality.
service quality.
small.
service quality.
small.
uplink interference.
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately

system capacity.
Immediately

parameter can satisfy the
requirement of enhanced
CELL_FACH service quality.
Immediately

service quality.
Immediately

uplink channel quality and
system downlink capacity.
Immediately
Considering the rate of the

DTCH data and uplink
interference.
Immediately
According to user throughput,

Immediately
delay and uplink interference.
No
No
No
No
No
No
No
No
No
No
No
No

indicates the E-DCH HARQ
power offset of the MAC-D
This
parameter
is the logical
flow carried
by common
Echannel
type
indicator
DCH when 2ms E-TTI for
is
common
E-DCH
MAC-d
used,
which
is used
to flow.
Function:
This
parameter
Configuration
Rule:
Thisgain
compute
the
quantized
indicates
the
E-DCH HARQ
parameter
is basic
factor
ed
of
E-DPDCH.
power
offset
of
the MAC-D
identification
parameter,
Related
Factor:
service Eflow
carried
by
common
should
not
be modified.
quality,
system
capacity.
DCH when 10ms E-TTI is
If the parameter
value
used,
which is used
to is
larger,
thethe
E-DPDCH
compute
quantized
gain
Function:
Thispower
parameter
transmission
will be
factor
ed
of
E-DPDCH.
indicates
the maximum
larger.Accordingly,
it will
Related
Factor:
service
number
of
retransmissions
improve
the
service
quality for
quality,
system
capacity.
the
MAC-D
flow
carried
by
but
affect
the system
If the
parameter
value
is
common
E-DCH
when
2ms
capacity.
larger,
E-DPDCH
E-TTI
isthe
used.
Function:
Thispower
parameter
If
the parameter
value is
transmission
Related
Factor:
datawill be
indicates
the
maximum
smaller,
the
E-DPDCH
larger.Accordingly,
it will
accuracy,
service
data
number
of
retransmissions
transmission
power
will
be for
improve
the
service
quality
throughput;
the
MAC-D
flow
carried
by
smaller.
Accordingly,
it
will
but
affect
the system
If
the
parameter
value
is
common
E-DCH
when
10ms
improve
the
system
capacity
capacity.
larger,
more times
of
E-TTI
isthere
used.
but
affect
theisservice
If
the
parameter
valuequality.
is
HARQ
retransmission.
Related
Factor:
data
smaller,
the
E-DPDCH
Accordingly,
it will data
improve the
accuracy,
service
transmission
power
will be
data
accuracy
but
affect
the
Function:
This
parameter
throughput;
smaller.
Accordingly,
it will
service
data
throughput.
indicates
the
maximum
size
in
If
the parameter
value
is
improve
the
capacity
If
the parameter
value
isin the
octets
of
the system
RLC
PDU
larger,
there
is
more
times
of
but
affect
thePDU
service
quality.
smaller,
there
is less
of
flexible
RLC
sizetimes
mode
HARQ retransmission.
HARQ
retransmission.
used
in
common
E-DCH.
Accordingly, it will improve the
Accordingly,
it Rule:
will
Configuration
data accuracy
but improve
affect thethe
Function:
This
parameter
data
throughput
but
affect
Considering
data
rate
and the
service data throughput.
indicates
therate.
minimum
data
packet
error
If
theaccuracy.
parameter
value issize in
octets
ofthere
the RLC
PDU
in the
Relative
larger
can
smaller,
isvalue
less
times
of
flexible
RLC
PDU
size
mode
improve
the supported rate,
HARQ retransmission.
used
in common
E-DCH.
but
it cannot
set
too large,
Accordingly,
itbewill
improve
the
Function:
This
parameter
Configuration
Rule:
because,
in
order
to
avoid the
the
data
throughput
but
affect
indicates
the
spreading
Considering
transmission
influence
of the
error of factor
PLC
data
accuracy.
supported
by
Uplink
performance
when
power
is
PDU made by too more
MAC
enhanced
CELL_FACH.
limited
and
the
L2
overhead.
segmentations when the radio
Configuration
Rule:
Relative
value
can
conditionsmaller
becomes
worse.
Considering
the
user This
rate and
improve theFunction:
transmission
Parameter
uplink
CE resource
performance
whenfor
UE power
parameter
is used
consumption.
is
limited.
Butdelay
it cannot
deciding the
of be set
The
smaller
the
SF,tobit'
the
higher
too
small,
in 'happy
order
avoid
transmitting
by
UE.
data
rate L2
may
be obtained,
too large
overhead.
Configuration
Rule:
Delay of
but
the larger
the CE
service
and uplink
power
resource
will
be
cost.
The
overhead brought
by sending
larger
the
SF,
the
lower
data
happy bit.
rate
may
be
obtained,
but
the
The larger the parameter, the
less
the
CE
resource
will
be
higher the service delay and
cost.less uplink power brought
the
by
sending Function:
happy bit.This
Parameter
The
smaller
Parameter
Function:
This
parameter isthe
theparameter,
limiting
the
smaller
the
service
parameter
indicates
the
ID of
HSDPA GBR resource delay
and
the
more
uplink
power
Limiting
HSDPA
GBR
consumption profile object ID.
brought byConsumption
sending happy bit.
Resource
parameters profile.
Configuration Rule: Different
configurations of limiting
HSDPA GBR resource
consumption parameters
profile
with Function:
different ID.
Parameter
This
AdjustmentisSuggestion:
parameter
the limiting
Primary
key can
not be
HSDPA GBR
resource
modified.
consumption configuration
object ID.
This parameter is basic

identification parameter,
should not be modified.
Can not be
modified
The service quality and the

system capacity are
default value.
Immediately

system capacity are
default value.
Immediately
The data accuracy and the

throughput are considered to Immediately
The data accuracy and the

throughput are considered to Immediately
Considering data rate and

packet error rate.
Immediately
Considering transmission
performance when power is Immediately
limited and the L2 overhead.
Considering the user rate

and uplink CE resource
consumption.
Immediately
Considering delay of service

and uplink power overhead
Immediately
brought by sending happy bit.
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
No
No
No
No
Yes
Yes
No
Yes
Yes
Yes
No
No
guaranteed
bit rate level
Parameter Function:
This
number
of
HSDPA
parameter indicatesservices
the
for
limiting HSDPA
guaranteed
bit rateGBR
levels of
resource
consumption.
HSDPA services for limiting
Configuration
Rule: How
Parameter
Function:
This
HSDPA GBR
resource
many
HSDPA
GBR levels
is
parameter
indicates
UE HSconsumption.
based
on
the
requirement
of
DSCH
required
power
upper
Configuration Rule: The GBR
different
HSDPA
GBR
limit
for
limiting
HSDPA
GBR
levels setting need to
consumption
limit
resource
consumption.
consider the
requirement
of
for different
HSDPA
Configuration
Rule:
ItGBR
needs
different
HSDPA
GBR
services.
Too
levelslimit of
to
consider
thefew
requirement
resource
consumption
cannot
meet
the
requirement,
different
HSDPA
GBR
for different
HSDPA
GBR
but
too many
is not
resource
consumption
limit
services,
and levels
the services
necessary.
for
different
HSDPA
GBR
with similar GBR resource
The
bigger this
parameter
services
consumption
should
be is,
the more
HSDPA
levels.
The
services
similar
GBR
allocated
into with
the GBR
same
GBR
The
this parameter
is,
resource
consumption
should
level.smaller
GBR
levels
relationship
the
less
HSDPA
GBR
levels.
be
allocated into the same
is hsGBRLev[0]<
GBR
level. And GBR levels
hsGBRLev[1]<
Function
of this
parameter: It
relationship
is hsGBRLev[0]<
hsGBRLev[2]<..<
indicates
whether
streaming
hsGBRLev[1]<
hsGBRLev[hsGBRLevNumservice
is
carried
by
PTP.
hsGBRLev[2]<..<
1].
Usually,
the bigger GBR
Factors
of
consideration:
hsGBRLev[hsGBRLevNumlevel
is, the
bigger HS-DSCH
downlink
code
power
1].
Usually,
the and
bigger
GBR is,
Required
Power
Per UE
Basic
index
resource.
the
bigger
HS-DSCH
Weight
threshold
If
the operator
this It
Function
of
this
parameter:
Function
of
thisturn
parameter:
It
Required
Power
PeronUE
(ueHsReqPwrUplim)
.
function,
streaming
service
indicates
the
minimum
rate
indicates
whether background
Weight threshold
will
be carried
in SCCPCH
PTP
threshold
the
service
is of
carried
by PTP.
(ueHsReqPwrUplim)
.or
SoPTM
according
to
the
number
of
setup
for
MBMS
in
order
to
Factors
of
consideration:
usually
UE
responding
avoid
the Code
deletethe
andcounting,
reDownlink
Resource,
ueHsReqPwrUplim[0]<=ueHs
this
willResource.
make
use of the
establish
the SCCPCH.
Power
ReqPwrUplim[1]<=ueHsReqP
resource.
If
the
operator
turn
Factors
of
consideration:
the
If
the MBMS is set
to "open",
wrUplim[2]<=..<=ueHsReqPw
off
this
function,
streaming
number
of
common
transport
background
service can be
rUplim[hsGBRLevNum-1].
service
will
be carried
in PTM,
channel
reconfiguration,
the
carried by
PTP
when the
the
downlink
code
and
power
utilization
of
SCCPCH.
number
of
UE
responding
Function of this parameter:the
it
resource
may
beisless,
butis
it
This parameter
larger,
the
counting/recounting
is less
indicates
whether
MSCH
will
make
use
of the
more
MBMS
willsoft
set
thannot
the
value
of setting,
supported
or services
not.This
function
handover.
up
in
one
SCCPCH.This
can
Function
this
parameter:
It
otherwise
services
can
makeofthe
UE
receive
incan
DRX
If
the
MBMS
is or
not
used,
this
avoid
to
delete
add
theThe
is
the
switch
to
control
only
be
carried
by
PTM.
in
order
to
save
the
energy
of
parameter
isFrequency
invalid.
SCCPCH
frequently,
but ifthe
the
whether
the
PTM
can reduce
UE. method
property
(TTI
and
TBsize)
of
Converge
function
is
applied
downlink
code
resource
and
Factors of consideration: the
MBMS
services
areservices.
different,
to
S Traffic
MBMS
power
resource.
energy
of UE
more
resources
canused,
not
be
Factors
of consideration:
MBMS
isturn
not
this
If the operator
on
the
used
.
downlink
power
resource.
parameterUE
is can
invalid
function,
receive the
This
smaller,
If
theparameter
operator
on this
MBMS
service turn
inisDRX,
thisthe
Function
of
this
parameter:
less
MBMS
services
will
setIt
function,
RNC
will
firstly
can save the battery
is
the
switch
to
control
up
in
one
SCCPCH.This
choose
the
prefer
frequency,
consuming of UE and can
whether
the
delete
addFrequency
thethe
SCCPCH
UE
canorreceive
serviceofin
improve
the
performance
Converge
function
applied
frequently,
but ifmore
theisproperty
soft-combining
easily,
UE.
to
B
Traffic
MBMS
services.If
(TTI
and
TBsize)
of
most
then
required
If thethe
operator
turnpower
off theofof
the
parameter
is"open",
UE
MBMS
services
are
SCCPCH
will
be
lower,
but
Parameter
Function:
MBMS
function, UE
can notthe
receive
can
receive
the
services
inof
same
,
this
will
make
use
the
compute
load
of
RNC
is
related
parameter.
This
the MBMS service in DRX,
soft-combining,
so
that
it
can
the
resources
.
higher.
parameter
indicates
the
this can not save the battery
reduce
required
power
MBMS
not. used,
this
If
the operator
turn
off
thisto
power
ofthe
SCCPCH
used
consuming
ofisUE
resource.
parameter
is
invalid
function,
RNC
choose
bear
information
when
If the MTCH
MBMS
iswill
notnot
used,
this
Factors
ofinfrequency,
consideration:
the
prefer
UE
can
receiving
the
soft
parameter
is
invalid
Parameter
Function:
MBMS
Power
Resource
and
receive
themode.
service
in softcombining
related
parameter.
This
compute load
of difficultly,
RNC.
combining
more
Configuration
Rule:
Itthe
needs
parameter
indicates
If
turn
onrequired
this
function,
the
then
the
power
to
consider
the
system
power
of SCCPCH
used of
to
probability
of
UE
receive
the
SCCPCH
willinformation
be higher,
but
capacity
and
service
quality.
bear
MTCH
when
services
in
soft-combining
the
compute
load
of RNC is,
isis
The
largerinthis
parameter
receiving
the
selective
higher,
so
that
the
SCCPCH
lower.
the
bigger SCCPCH
power
combining
mode.
will
send
the
services
in less
If
the
MBMS
isRule:
not when
used,
this
which
bear
MTCH
Configuration
It
needs
power, butinis
the
compute
load
parameter
invalid
receiving
the
soft
to
consider
the system
of
RNC is higher.
combining
mode.
Andquality.
system
capacity
and
service
If
the MBMS
is
not
used, this
capacity
will
be
reduced.
The
larger this
parameter is,
parameter
isthis
invalid.
The
smaller
parameter
the bigger
SCCPCH
power is,
the
smaller
SCCPCH
power
which bear MTCH when
which bear
when
receiving
in MTCH
the selective
receiving
the soft
combininginmode.
And system
combining
mode.
And service
capacity will be reduced.
quality
will
be
affect.
the smaller this parameter is,
the smaller SCCPCH power
which bear MTCH when
The default GBR level

number is 12, it is big enough
to meet the requirement of
different HSDPA GBR
The
default
GBR levelslimit
can
resource
consumption
satisfy
the requirement
of
for different
HSDPA GBR
different
services.HSDPA GBR
resource consumption limit
for different HSDPA GBR
services,
and
the services
The default
value
of this
with similarcan
GBR
resource
parameter
satisfy
the
consumption
be
requirement ofhave
different
allocated
into resource
the same GBR
HSDPA GBR
level.
consumption limit for different
HSDPA GBR services, and
ueHsReqPwrUplim[0]<=ueHs
ReqPwrUplim[1]<=ueHsReq
PwrUplim[2]<=..<=ueHsReqP
wrUplim[11].
Basic index
The MBMS Streaming
services are also the high
rate services.If the services
are carried by PTP, there will
consume more resource.So
the default is set to turn off
the function of PTP, the
The
MBMS
Background
MBMS
streaming
services
services
often
is PTM.
low rate .So
will be carried in
the services are carried in
PTP or PTM based on the
number of UE responding
counting/recounting
The default value is set
according to the utilization of
SCCPCH and the number of
common transport channel
reconfiguration
Immediately
Immediately
Immediately after
each
measurement
period
Cann't Modify
New Session
New Session
New Session
N/A
Immediately
It is set according to the

compute load of RNC.
New Session
the compute load of RNC
Immediately

service quality.
Immediately

service quality.
Immediately
No
No
Yes
Yes
No
No
No
No
Yes
No
No
No

threshold to judge if the local
cell is in half-island status.
Parameter
Function:
Configuration
Rule: ItMBMS
needs
related
parameter.
This
to consider
the system
parameter
indicates
capacity and
service the
quality.
threshold
to judge
thelarge,
cell is
If the parameter
is iftoo
in
status.
Function
of more
this parameter:
it
theisland
cell will
easily to use
Configuration
Rule:
It for
needs
indicates
UEs
in halfthe powerwhether
configured
to
consider
the
system
CELL_PCH
state
will
be
island
mode,
and
it might
capacity
and
service
counted
not.
waste theor
power
and quality.
affect
If
the parameter
is too large,
Factors
of consideration:
system
capacity.
the
cell
will
more
to use
Downlink
Code
Resource,
If
the
parameter
iseasily
too small,
it
the
power
configured
for
Power
Resource,
the
uplink
the
cell
will
more
easily
to use
indicates
whether
UEs
in
Function
this
parameter:
island
and
itthe
might
load
ofmode,
Uuofconfigured
owe
to
the power
for It
CELL_PCH
state
will
be
indicates
the
switch
of
waste
the
power
and
affect
responding
of
counting.
normal combining
mode, and
counted
or
not. service
dropping
MBMS
in
system
capacity.
If
the operator
turnquality
on this
itFactors
might
affect
the
of
of
consideration:
MBMS
overload
control.
If
the
parameter
is
too
small,
function,
the
UEs
in
MBMS
services.
Downlink
Code
Resource, it
Function
this
Factors
ofof
consideration:
the
cellResource,
will
more
easily
to use
CELL_PCH
will parameter:
decide
to
Power
uplink
indicates
whether
UEs
inofhalfDownlink
load,
thethe
ratio
the
power
configured
for
respond
the
counting,
so
that
load
of
Uu
owe
to
the
CELL_FACH
state
be
MBMS
service
drop.
island
mode,
it will
might
the
number
ofand
user,
which
responding
of
counting.
counted
not.turn
If
the for
operator
on
this
affect
theor
quality
ofbetween
MBMS
used
switching
If
the operator
turn
on
this
Factors
of
consideration:
function,
RNC
can
drop
the
services.
PTP
and the
PTM,
willinbe bigger,
function,
UEs
Downlink
Code
Resource,
MBMS
services
in
the
las
then
it is easier
use the
CELL_PCH
will to
decide
to
Power
Resource,
the uplink
PTM
for
MBMS
service
respond
theowe
counting,
soand
that
load
of
Uu
to
the
will reduce
downlink
code
Function
of the
this
parameter:
It
the
number
of counting.
user,
which
responding
of
and
power
resource,
but
the
is
a
timer
which
starts
after
used
for
switching
between
If
the operator
turn
on this It
Function
of
this
parameter:
uplink
overload
of
Uu
transmission
of will
RRC
PTP
and
PTM,
be bigger,
function,
the
UEs
in
indicates
the UE
increase
more
quickly.
CONNECTION
REQUEST
then
it is easier
tonumber
use the
CELL_FACH
will
decide
to in
threshold
used
for
switching
If
the
operator
close
thisand
case
of
connection
PTM
for
MBMS
service
respond
the
counting,
that
between
PTP
and
PTMsoin
function,
thethe
UEs
in
establishment
for
MBMS
will reduce
downlink
code
the
number
of
user,
which
order
to
control
the
rate
of
CELL_PCH
willstops
not to
reception
and
after
and
power
resource,
but the
used
for the
switching
between
transferring
between
PTP
respond
counting,
thenand
it
reception
of
RRC
uplink
overload
of
Uu
PTP
anddifficult
PTM, will
be bigger,
PTM.
is
more
to
use
the
CONNECTION
SETUP.
increase
more quickly.
then
itfor
isof
easier
to
use the
Factors
consideration:
PTM
MBMS
service
Factors
of
consideration:
the
If
the
operator
close
thisand
PTM
for
MBMS
service
and
downlink
code
and
power
will
increase
the
downlink
probability
of
RRC
connection
function,
the
UEs
in
will
reduce
the downlink
code
resource.
code
and power
resource,
but
successfully,
thenot
time
of UE
CELL_PCH
will
tobut
and
power
resource,
the
The
parameter
is
larger,
the
the uplink
overload
of Uu
wait
to
idle
mode
after
RRC
respond
the
counting,
then
it
uplink
overload
of Uu
transfer
from
PTP
tothe
PTM
increase
more
slowly.
connection
request,
is
more
difficult
to
use
the
increase
more
becomes
more
difficult
,and
the
If thefor
MBMS
isquickly.
not
used,
this
round-trip
delay
between
UE
PTM
MBMS
service
If
the
operator
close
this
transfer
from
PTM
to
PTP
parameter
is
invalid
and
UTRAN.
will
increase
the
function,
the
UEsdownlink
in required
becomes
easier,
the
The
larger
this
parameter
code
and
power
resource,
but
CELL_FACH
will
not to is,
code
and
power
resource
the
longer
the
UE waits
thewill
uplinkthe
overload
of Uu
respond
counting,
then
it
be
more.
RRC
CONNECTION
SETUP
increase
more slowly.
is
more
difficult
to
use
the
The
parameter
smaller,
the
for
MBMS
services,
the and
more
If the
MBMS
is is
not
used,
this
PTM
for
MBMS
service
transfer
from
PTP
to
PTM
opportunity
UE
can
parameter
isthe
invalid
will
increase
the
becomes
easier
,downlink
the transfer
receive
the
RRC
Function:
This
parameter
isbut
a
code
and power
resource,
from PTM
to PTP
becomes
CONNECTION
SETUP,
the
switch
indicating
whether
Iub
the uplink
overload
of Uu
more
difficult,
required
longer
time
willthe
be
needed by
transport
bearer
multiplexing
increase
more
slowly.
code
and
power
resource
will
UE
to enter
idle
mode
, thethis
is
on the
interface.
If used
the
MBMS
isIub
not
used,
be
less.
feeling
of User
will be
Configuration
Rule:
According
parameter
is invalid
If the MBMS
is
not used,
this
affected.
to
whether
the
Node
B
parameter
is
invalid
The smaller
this parameter
is,
support
Iub transport
bearer
This
parameter
indicates
the
the
shorter
the UE
waits the
multiplexing.
UE
Profile SETUP
Object
RRCDTX/DRX
CONNECTION
ID
belonging
to
the
parent
for
MBMSThis
services,
the less
Function:
parameter
is
object
vsDataUDtxDrxProfile.
opportunity
the
UE
can
UE
DTX/DRX
configuration
It
shouldthe
be unique under
receive
Index
whichRRC
indicates a set of
vsDataUDtxDrxProfile.
CONNECTION
SETUP, the
DTX/DRX parameters.
shorter
time will
be needed by
Configuration
Rule:
UE
to
enter
idle
mode,
Numbering the differentthe
sets
ratio
of RRC parameters
connect
of DTX/DRX
of
successfully
will be lower
.
the system. Services
of the
If
the
MBMS
is
not
used,
this
same QoS should be
parameter
is
invalid
configured
with
the
same the
This
parameter
indicates
index.
UE DTX/DRX Profile Object
ID.

service quality.
Immediately

service quality.
Immediately
It is recommended to turn on
the function in order to
decrease the load of cell
quickly.
The default value is set in
order to make more UE to
respond the
counting/recounting, so that
the MBMS service will
transport
in PTM
The default
valuemore
is seteasily
in
respond the
transport
in PTM
The default
valuemore
is seteasily
in
respond the
transport in PTM more easily
It is set according to the code
and power resource.
probability of RRC
connection successfully, the
time of UE wait to idle mode
after RRC connection
request and the round-trip
delay
between
UE andby
This switch
is opened
UTRAN.
default which should be
adjusted according to
whether the Node B support
Iub transport bearer
multiplexing.
Basic index
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Takes effect for

the newly
established cell.
Cann't Modify
Numbering the different sets

of DTX/DRX parameters of
the system. Realtime and
At next use (i.e.,
non-realtime services having shall not affect
ongoing services)
different QoS requirement
and using different index
separately.
Basic index
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
TTI is 2ms and UL DTX mode

is active, if UE enters DTX
mode
controlled
by UL DTX
Function:
This parameter
mode
1,
UE
will
use
value
indicates the UE DTXthe
cycle
1
indicated
by this
parameter
for 10ms TTI.
When
E-DCHas
DTX
TTI iscycle
10ms1.and UL DTX
Configuration
mode is active,Rule:
if UE enters
Considering
uplink
power
and
Function:
parameter
DTX modeThis
controlled
by UL
the
speed
for
UE
to
transit
to2
indicates
the
UE
DTX
cycle
DTX mode 1, UE will use the
continuous
for
2ms
TTI.transmission.
When
E-DCH
value
indicated
by this
The
parameter
TTI
islarger
2ms this
andDTX
UL DTX
parameter
as
cyclemode
1.is,
the
longer
the
cycle
period
is
active, if UERule:
enters DTX
Configuration
when
UE
is
inuplink
DTX
cycle
1and
mode
controlled
by power
UL DTX
Considering
Function:
This
parameter
using
2ms
E-TTI,
the
more
mode
2,
UE
will
use
the
value
the speedthe
for UE
UE DTX
to transit
indicates
cycleto2
power
is saved
but
when
UEas
indicated
bytransmission.
this
parameter
continuous
for
10ms
TTI.
When
E-DCH
transits
to
continous
DTX
cycle
2.
The
larger
this
parameter
TTI is 10ms and UL DTX is,
transmission
delay
Configuration
Rule:
the
longer
thethe
cycle
mode
is active,
if more
UEperiod
enters
will
be
obtained.
And
vice
Considering
whenmode
UE iscontrolled
inuplink
DTX power
cycle
1and
DTX
by UL
versa.
the
accuracy
of
the
power
Function:
This
parameter
using
10ms
E-TTI,
the
more
DTX
mode
2,
UE
will
use
the
when
transiting
to cycle
indicates
the
MAC
DTX
powerUE
is saved
but
when
UE
value
indicated
by this
continuous
transmission.
for
2ms to
TTI.
When
UL DTX
transits
continous
parameter
as
DTX cycle
2.
The
larger
this
parameter
is,
mode
is
active,
if
no
transmission
the
more
delay
Configuration Rule: E-DCH
the
longer
the
cycle
period
transmission
has
been
will
be
obtained.
And
vice
Considering uplink power and
Function:
This
parameter
when
UE is
inofthe
DTX
cycle
2
performed
for
MAC
versa.
the
accuracy
thelast
power
indicates
the
MAC
DTX
cycle
using
2ms
E-TTI,
Inactivity
E-TTIs,
when UE Threshold-1
transitingthe
to more
for
10ms
TTI.
When
UL DTX
power
saved
but
when
UE
UE
willisperform
E-TFC
continuous
transmission.
mode
is
active,
if
no
E-DCH
transits
to
continous
selection
periodically
in
each
The larger this parameter is,
transmission
has
been
the
less
MAC
DTX the
cycle.
the
longer
cycle
period
Function:
This
parameter
performed
for
the
last
MAC
accurate
the
power.
And
vice
Configuration
Rule:
when
UE
is
in
DTX
cycle
2
indicates
the
inactivity
Inactivity
Threshold-1
E-TTIs,
versa.
Considering
power the more
using
10ms
E-TTI,
threshold
for UE
DTX
cycle
2
UE
willisperform
E-TFC
consumption
of but
UE
and
the
power
saved
when
UE
for
2ms
TTI.
If
there
has
no
selection
in each
timeliness
of data
transits
toperiodically
continous
any
E-DCH
transmission for
MAC
DTX
cycle.
transmission.
transmission
less TTIs
the
number
ofthe
E-DCH
Configuration
Rule:
Function:
This
parameter
Configuration
Rule:
When
accurate
the
power.
And vice
indicated
byispower
this
parameter,
Considering
indicates
inactivity
2ms
E-TTIthe
used,
the larger
versa.
UE
use
DTX
cycle
consumption
ofthe
UE
and
the2 2
threshold
forUE
UE
DTX
cycle
the will
parameter,
less
uplink
as
DTX
cycle,
i.e.
UE
will
timeliness
of
data
for
10ms
TTI.
If
there
has
no
power will be consumed, but
transmit
DPCCH
burstwill
in for
transmission.
any
E-DCH
transmission
the
data
transmission
be
Function:
This cycle
parameter
each
UEtoDTX
2. TTIs
Configuration
Rule:
When
the
number
ofUE
E-DCH
delayed
some
extent.
And
indicates
the
DTX
long
Configuration
Rule:
10ms
E-TTI
is
used,
the
indicated
by
this
parameter,
vice
versa.
preamble
length.
When
UE
Considering
uplink
power
larger
the less
UE willthe
useparameter,
UE
DTX
cycle
2
enters
DTX
status
controlled
consumption
and
the
uplink
will
as
DTXpower
cycle,
i.e.be
UE
will
by
UE
DTX
cycle
2,
if
there
is
timeliness
for
consumed,
butdata
the
data
transmit
DPCCH
burst
in Edata
to
be
transmitted
on
transmission.
transmission
will
be delayed
each
UE
DTX
cycle
2.
DCH,
UE
shall
transmit
When
using
2ms
E-TTI,
the
to
some
extent.
And
Configuration
Rule:
Function:
This
parameter
DPCCH
firstly
in the vice
UE
DTX
larger
the
parameter
is,
the
versa.
Considering
power
indicates
theuplink
MAC
inactivity
long
preamble
length
slots.
stricter
for When
UEand
to
enter
DTX
consumption
theDTX
threshold.
UL
Configuration
Rule:
cycle
2,
and
the
more
power
timeliness
for
data
mode
is active, if nopower
E-DCH
Considering
is
consumed,uplink
but been
once there
transmission.
transmission
has
consumption
and
whether
the
is
data,using
it can
be
send
outthe
Function:
This
parameter
When
E-TTI,
performed
for10ms
the
number
of
DPCCH
power
can
more
immediately.
And
indicates
timer
length
larger
thethe
parameter
is, vice
the
continuous
E-TTIs
indicated
synchronize
the
current
versa.
during
which
CQI
report
stricter
for
UE
to
enter
DTX
by
this
parameter-1,
UE
channel quality when UEwill
priority
higher
than DTX
cycle 2,isand
the
more
power
perform
E-TFC
selection
resumes
data
transmission
priority.
is
consumed,
but
there
periodically
in each
MAC
DTX
from DTX cycle
2 once
status.
Configuration
Rule:
is
data,
it
can
be
send
out
cycle.
The larger the parameter, the
Considering
uplink
power
and
more
vice
Configuration
Rule:And
more immediately.
uplink power
will
be
the
accuracy
of
the
channel
versa.
Considering
power
Function:
This
parameter
consumed, but before UE
quality
by
consumption
of downlink
UEdata
and
the
indicates
length
of uplink
reverts used
to the
transmit
from
scheduler.
timeliness
of
data
DPCCH
burst
whenthe
UE
DTX cycle
2 state,
The
larger
the
parameter
is,
transmission.
enters
DTX
mode
DPCCH
power
cancontrolled
the
longer
for
the
CQI
report
The
larger
the
parameter
by
UE DTX cycle
synchronize
better1.to the is,
having
priority
over
DTX, the
the
stricter
to
enter
uplink
Configuration
Rule:
current channel
condition.
larger
the
uplink
power
andthe
DRX
,
and
the
more
uplink
Considering
uplink
power,
And vice versa.
the
more
accurate
ofbut
theonce
power
is consumed,
accuracy
of the
channel
quality
used
there is data,
it can
bebycurrent
send
synchronization
of the
downlink
scheduler.
out morequality.
immediately. And
channel
The
theparameter
parameteris,is,
vice
versa. the
The smaller
larger
the
shorter
for
the
CQI report
the longer it takes the
having priority
over DTX,
DPCCH
to transmit
when the
UE
less
the uplink
performs
radio power
link and the
less
accurate of while
the channel
synchronization
in DTX
quality
used
by
downlink
cycle 1, thus the more
scheduler.
contribution to the uplink
power, and the better it
Considering uplink power

and the speed for UE to
transit to continuous
transmission.
At next use (i.e.,

shall not affect
ongoing services)

and the speed for UE to
transit to continuous
transmission.
At next use (i.e.,

shall not affect
ongoing services)

and the accuracy of the
power when UE transiting to
continuous transmission.
At next use (i.e.,

shall not affect
ongoing services)

power when UE transiting to
continuous transmission.
At next use (i.e.,

shall not affect
ongoing services)
Considering power
consumption of UE and the
timeliness of data
transmission.
At next use (i.e.,

shall not affect
ongoing services)
Considering power
timeliness of data
transmission.
At next use (i.e.,

shall not affect
ongoing services)

consumption and the
timeliness for data
transmission.
At next use (i.e.,

shall not affect
ongoing services)

consumption and the
timeliness for data
transmission.
consumption and whether the
DPCCH power can
synchronize the current
channel quality when UE
resumes data transmission
from DTX cycle 2 status.
Considering power
timeliness of data
transmission.
channel quality used by
downlink scheduler.
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
Considering uplink power, the

At next use (i.e.,
accuracy of the
shall not affect
synchronization of the current
ongoing services)
channel quality.
No
No
No
No
No
No
No
No
No
No
No
No
DPCCH burst when UE

enters DTX mode controlled
by UE DTX cycle 2.
Configuration
Function: AfterRule:
UE enters
Considering
uplink
power,
the
downlink DRX
mode,
UE shall
accuracy
of
the
detect HS-SCCH in each
synchronization
of the current
number of subframes
channel
quality.
indicated
by this
parameter.
Function:
parameter
The
largerThis
theRule:
parameter
is,
Configuration
indicates
the
inactive
the longer it takes
the
Considering
the
frequency
to
threshold
UE transferring
DPCCH
tofor
transmit
when
UE
monitor
the
HS-SCCH
when
to
monitorradio
HS-SCCH
performs
link status
UE
is in downlink
periodically
every
UE DRX
synchronization
while
inand
DTX
discontinous
reception
cycle
subframes.
cycle
2,
thus
the
more
the
time it takes
UE to
Configuration
contribution
toRule:
the uplink
Function:
parameter
transfer toThis
continous
Considering
the
time
it takes
Function:
After
power, and
the E-DCH
better
indicates
whether
UE itis
reception.
UE
to
transfer
to
discontinous
scheduled,
UE
shall
monitor
synchronizes
toparameter,
the current
monitors
full
of
The
largerthe
the
the
reception
and
theE-AGCH
accuracy
of
the
full
E-AGCH
of
the
E-DCH
channel.And
vice
versa.
the
serving
cell
when
the
start
less
frequent
for
UE
to
the
judgment
that
the
serving
cell
and or
E-RGCH
(s)
of
the E-AGCH
E-RGCH
monitor
HS-SCCH
when UE
downlink
isininthe
discontinous
of
all
cells
E-DCH
transmission
overlaps
with
an
is
in downlink DRX, the
transmission.
active
set
for
the
number
of
HS-SCCH
reception
slower
for UE
transit to is,
The
larger
the to
parameter
E-TTIs
indicated
by this
subframe.
continous
reception.
And vice
the
longer
for
UE
to monitor
parameter.
Configuration
Rule:
versa.
HS-SCCH
continously
each
Configuration
Rule:
Considering
demodulation
UE
DRX
cycle
subframes,
the
Considering
power
performance
and
life-span
of
slower
for
UE
to
transfer
to
consumption
of UE and the
the
battery.
discontinous
timeliness
of reception,
data UE the
If
is set
to FALSE,
more
accurately
to judge that
transmission.
monitors
the part
E-AGCH
of
the
downlink
is
in
discontinue
The
larger the
parameter,
the
the
serving
cell
when
the
start
transmission.
And vice
versa.
more
power
will be
of the uplink
E-AGCH
or E-RGCH
consumed,
the more
transmissionbut
overlaps
with an
timely the data
can be
HS-SCCH
reception
transmitted.
And vice versa.
subframe.Comparing
with full
reception
of
above
channels
parameter is the power
(when
parameter
controlthe
profile
related is
to set to
Parameter
Function:
This
TRUE)
,
the
demodulation
service object ID.
parameter
indicates
the initial
performance
is deceased
load
for the
whichscene
will make
theparameters
Parameter
Function:
in
USrvPcProfile.
performance
of uplinkThis
parameter
is
the
service
Configuration
Based on
services usingRule:
scheduling
related
power
control
service
qualitydecrease
and system
grant method
to
parameters
ID.benefit
capacity
canprofile
be provided
by is
some extent.But
the
the
power
control
parameters
that UE's battery life will be
in
the USrvPcProfile.
prolonged.
If the power control
parameters in this
USrvPcProfile can provide not
very good service quality but
can
provideFunction:
better system
Parameter
This
capacity
than
normal
Parameter
Function:
This is
parameter is the
power
condition,
then
the
load
service
type
identification
control related to servicescene
can
beID.
configured as the high
parameter.
object
load cell. Otherwise,
it should
Configuration
Rule: Different
Function:
This as
parameter
be
configured
the normal
services
which
are
indicates
load
cell. which
distinguished
byuplink
traffic inner
class,
loop
power
control
algorithm
CN
domain
indicator,
direction
is
used.
For
and
maximum
bit rate
should
indicates
thealgorithm
step
size 1
foinner
the
loop
is done
havepower
different
service
type
uplink
inner control
loop
power
every
time slot. For algorithm
identification.
control.
2
inner
loop
power
control is
Adjustment
Suggestion:
Related
Factor:
service
done
every
5
time
slots.
Primary
key
can
not
be
quality, system capacity
Related
Factor:
wireless
modified.
scenario.
large,
the power will be
The
"algorithm
1" willto
beaffect
suit
decreased
too lower
for
the
quick
channel
fading
the service quality and the
wireless
power willscenario;
be increased too
The
"algorithm
be suit
higher
to waste2"
thewill
power
for
the
slow
channel
fading
resource affecting the system
wireless scenario.
capacity.
small, the power will be
decreased too slow to waste
the power resource affecting
the system capacity and the
Considering uplink power, the

accuracy of the
synchronization of the current
channel quality.
Considering the frequency to
monitor the HS-SCCH when
UE is in downlink
discontinous reception and
the time it takes UE to
transfer to continous
Considering
reception. the time it takes
UE to transfer to discontinous
reception and the accuracy of
the judgment that the
downlink is in discontinous
transmission.
Considering power
timeliness of data
transmission.
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
Considering demodulation
At next use (i.e.,
performance and life-span of shall not affect
the battery.
ongoing services)
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
The wireless scenario is

default value.
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link
No
No
No
No
No
No
No
No
No
No
No
No

indicates the step of
increasing the uplink SIR
target.
Related Factor: the service
quality,
theThis
system
capacity
Function:
parameter
If the parameter
indicates
the stepvalue
of is too
large,
the SIRtarget
will
be
decreasing
the uplink
SIR
Parameter
Function:
This
increased
too
higher
to
waste
target.
parameter
indicates affecting
the
the
power
resource
Related
Factor:
the
service
maximum
step
of
decreasing
Parameter
Function:
This
the
system
capacity;
quality,
theSIR
system
capacity
the
uplink
target.
parameter
indicates
the
If
the
parameter
value
is
If the parameter
value
is too
too
Configuration
Itwill
needs
maximum
stepRule:
size of
small, the
the SIRtarget
SIRtarget
be
large,
will
be
to
consider
the
service
quality
increasing
the
uplink
SIR
increased
too
toto
affect
decreased
tooslow
lower
affect
and
the system
capacity
target.
the
service
quality;
the
service
quality;
If
the parameter
value
is too
Configuration
Rule:
It needs
If
the parameter
value
is too
large,
the
uplink
SIR
target
to
consider
the service
quality
small,
the
SIRtarget
will
decreasing
accuracy
willbe
be
and
system
capacity.
decreased
too parameter
slow to
waste
too
low.
Accordingly
it will
Function:
This
If
the
parameter
value
is
too
the
power
resource
affecting
affect
the
demodulation
indicates
step
size
fo the
large,
the the
SIR
target
the
system
capacity.
performance,
and
it
will
downlink
inner
loop
power
increasing step size will affect
be
the
quality.
control.
too service
big when
consecutive
If
the TB
parameter
value isSIR
too
Related
Factor:
service
error
or consecutive
small, increasing
the
uplinkcapacity
SIR
target
quality,
system
target
occurs.
decreasing
rate
will
be is
too
If
the parameter
value
too
Accordingly,
it will
improve
the
slow.
Accordingly
it
will
large,
the
power
will
be
service quality but affectaffect
the
the
system
capacity.
decreased
too
lower to affect
system
capacity.
When
swchAdaptiveStep=0,
the
service
quality
and is
the
too
Function:
parameter
this parameter
is invalid.too
power
willThe
be increased
small,
the
SIR
target
indicates
the
transport
higher
to waste
the power
increasing
step
size
will be
Function:
This
parameter
channel
BLER
quality
resource
affecting
the target.
system
not
big
enough
when
indicates
the error
transport
Related
Factor:
service
capacity.
consecutive
error
TB
or
block
number
threshold
quality,
system
If
the parameter
value
isintoo
consecutive
SIRcapacity.
target
outer
loop
power
control
If
the parameter
value
small,
the power
will beis
increasing
occurs.
using
threshold
algorithm.
larger,
it willtoo
improve
decreased
slow
tothe
waste
Accordingly,
it
will
improve
the
Related
Factor:
service
system
capacity
but
affect
the
Function:
The
parameter
the
power
resource
affecting
system
capacity
but
affect
the
quality,
system
capacity.
service
quality.
indicates
the
tolerance
the
system
capacity
andperiod
the
service
quality.
Configuration
Rule:
If
the
parameter
value
istoo
in
uplink
loop
power
power
willouter
be increased
If
theto
parameter
value
is
smaller,
it will threshold
improve
the
control
using
slow
affect
the
service
larger,
it
is
more
difficult
to
service
quality
but
affect
the
algorithm.
quality.
increase
the
system
capacity.
Related Factor: service
SIRtarget.Accordingly,
it will
Function:
This parameter
quality,
system
capacity.
improve
the
capacity
indicates
thesystem
threshold
If the parameter
value
isof
but
affect
service
quality.
HARQ
indication
larger,
itfailure
isthe
more
difficult
to
If
the
parameter
value
is target
number
to
increase
SIR
decrease the
smaller,
it is more easier
to
when
E-TTI=2ms.
it will
increase
the
SIRtarget.
Related
Factor:
service
improve the
service
quality
Function:
This
parameter
Accordingly,
will
improve
quality,
system
capacity.
but
affect
theitthreshold
system
indicates
the
of the
service
quality
but
affect
If
the
parameter
value
is
capacity.
HARQ failure indication the
system
larger,
itcapacity.
is increase
more value
difficult
If the parameter
number
to
SIRisto
target
increase
smaller,
itthe
is more easier to
when
E-TTI=10ms.
decrease
the SIRtarget.
Related
Factor:
serviceit will
Function:
This
parameter
improve
the
system
capacity
Accordingly,
itnumber
will
improve
quality,
system
capacity.
indicates
the
of the
but
affect
the
service
quality.
system
capacity
but
affect
the
If
the
parameter
value
is(NHR)
HARQ
retransmissions
If
the
parameter
value
is
service
quality.
larger, it istomore
difficult
threshold
increase
SIRto
smaller,
itthe
is more
easier
to
increase
target
when
E-TTI=10ms.
increase
the
SIRtarget.
it will
Related
Factor:
service
Function:
This
parameter
Accordingly,
it will
improve
the
improve
the
system
capacity
quality,
system
capacity.
indicates
the
number
of
service
quality
but
affect
the
but
affect
the service quality.
If
the
parameter
is(NHR)
HARQ
retransmissions
system
capacity.value
If the parameter
value
isto
larger,
it
is
more
difficult
threshold
to
decrease
SIR
smaller,
itthe
is more easier to
increase
target
when
increase
the E-TTI=10ms.
SIRtarget.it will
Related
Factor:
service
Accordingly,
it
will
improve
the
improve
the system
capacity
quality,
system
capacity.
service
quality
but
affect
the
but
affect
the service quality.
If
the
parameter
system
capacity.value is
If the parameter
larger,
it is more value
easieristo
smaller,
is more easier to
decreaseit the
increase
the SIRtarget.it will
Accordingly,
it will improve
the
improve the system
capacity
service
quality
but
affect
the
but affect the service quality.
system
capacity.value is
If the parameter
smaller, it is more difficult to
decrease the SIRtarget.
service quality but affect the

system capacity are
default value.
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection
No
No
No
No
No
No
No
No
No
No
No
No
HARQ retransmissions (NHR)

threshold to increase SIR
target when E-TTI=2ms.
Related
service
Function:Factor:
This parameter
quality,
system
capacity.
indicates the number of
If
the parameter
value is(NHR)
HARQ
retransmissions
larger, it istomore
difficult
to
threshold
decrease
SIR
increase
the E-TTI=2ms.
target when
Related Factor: serviceit will
improve
the
system
capacity
Function:
This
parameter
quality, system
capacity.
but
affect
the
service
indicates
the
threshold
If the parameter valuequality.
isof
If
the
parameter
value
sample
number
to
increase
larger, it is more easieristo
smaller,
it the
iswhen
moreE-TTI=10ms.
easier to
SIR
target
decrease
increase
the SIRtarget.
Related
Factor:
serviceit will
Function:
This
parameter
Accordingly,
it will
improve
the
quality,
capacity.
improvesystem
the
system
capacity
indicates
the
threshold
of
service
quality
but
affect
the
If
the
parameter
value
is
sample
number
decrease
system
larger,
itcapacity.
is more to
difficult
If the parameter
value
isto
SIR
target
when
E-TTI=10ms.
increase
the
smaller, it is more difficult to
Related
serviceit will
decreaseFactor:
the SIRtarget.
quality,
system
capacity.
improve
the system
capacity
Accordingly,
it will
improve
the
Function:
This
parameter
If
the
parameter
value
is the
but
affect
the service
quality.
service
quality
but
affect
indicates
threshold
larger,
itcapacity.
isthe
more
difficultisofto
If
the parameter
value
system
sample
number
to
increase
decrease
smaller, it the
is more easier
to
SIR
target
when
E-TTI=2ms.
increase the SIRtarget.it will
Related
Factor:
service
improve
the service
quality the
Accordingly,
it will
improve
Function:
This
parameter
quality,
system
capacity.
but
affect
the
system
service
quality
but affectofthe
indicates
the threshold
If
the parameter
value is
capacity.
system
capacity.
sample
number
to
decrease
larger,
it
is
more
difficult
isto
SIR
target
when
E-TTI=2ms.
increase
the
smaller,
it
is
more
easier
to
Function:
This parameter
Related
Factor:
serviceit will
decrease
the
SIRtarget.
indicates
thesystem
BER
target
for a
quality,
system
capacity.
improve
the
capacity
Accordingly,
it will
improve
the
physical
channel
out
Valid
If
the
parameter
value
is the
but
affect
the service
quality.
system
capacity
but
affect
Time
the
larger,
itquality.
is morewhen
difficult
If
the Windows
parameter
value
istoFP
service
Mode
is
normal,
which
is to
the
decrease
smaller, it the
is more easier
base
of
outer
loop
power
it
will
Parameter
This
increase theFunction:
SIRtarget.
control
method
using
physical
improve
theindicates
service
quality
parameter
the
BER
Accordingly,
it will
improve
the
channel
BER.
but
affect
the
system
target
for
a
physical
channel
Related
Factor:
service when
capacity.
in
Valid capacity.
Time
Windows
system
quality,
system
capacity.
If the
value which
is
the
FPparameter
mode is silent,
If
the
parameter
value
is to
smaller,
it
is
more
easier
is
the
base
of
outer
loop
Parameter
Function:
This
larger,
it
is
more
easier
to
decrease
the
SIRtarget.
power control
method
using
parameter
indicates
the
decrease
the
Accordingly,
it
will
improve
the
physical
channel
BER.
number
threshold of physical
it willthe
system
capacity
but
affect
Configuration
Rule:
service
channel
BER
less than
or
improve
the system
capacity
service
quality.
quality,
system
capacity.
equal
BER
target
in
the
uplink
but
affect
the service
quality.
If
the
parameter
value
is BER
outer
loop
power
control
If
the parameter
larger,
it is more value
easieristo
based
algorithm.
smaller,
it
is
more
difficult to
decrease the Rule:
Configuration
service
it will
quality,
system
capacity.
Accordingly,
it will improve
the
improve
the
system
capacity
If
the parameter
value
is the
service
quality
but
affect
but
affect
service
quality.
larger,
itcapacity.
isthe
more
difficult
to
system
If
the
parameter
value
is
decrease the
smaller,
it is more difficult
to
it will
decreasethe
theservice
SIRtarget.
improve
quality
Accordingly,
will improve the
but affect theitsystem
service
quality
but affect the
capacity.
This
parameter
is not used in
system
capacity.
If
the parameter
value is
current
SW version
smaller, it is more easier to
system capacity but affect the
This
parameter
service
quality. is not used in
current SW version

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection

system capacity are
default value.
New connection
N/A
New connection
or new radio link
N/A
New connection
or new radio link
This parameter is not used in

N/A
current SW version
New connection
or new radio link
No
Yes
No
No
Yes
No
No
No
No
No
No
No

uplink outer loop power
This
parameter
is not used
control
(OLPC) based
on in
current
SW
version
SIRtarget adaptive down step
size is used or not.
Parameter
This
to consider Function:
service quality
parameter
and systemindicates
capacity.whether
uplink
outer loop
If the switch
is on,power
SIR target
control
(OLPC)
on QE
decrease
wouldbased
be rapidly
is
used
or not quality
in ValidisTime
when
service
good,
Windows
if the
FP Mode
is be
and system
capacity
would
silent.
increased.
Configuration
Thetarget
value
If
the switch
isRule:
off, SIR
current
SW version
of
this parameter
should
decrease
step is fixed,
and
Function:
This
parameter
consider
the
service
quality
service quality
is relative
indicates
thecapacity.
E-DCH HARQ
and
system
good.
power
FDD, which
Turn onoffset
this switch,
whenisTB
This
parameter
is
not
used
to
compute
the
number is less then used in
current
SWgain
version
quantized
factor
BLERAccpPeriod,
theed
SIRof
E-DPDCH.
target can be decreased
Related
service
based onFactor:
the physical
quality,
capacity.
channelsystem
BER, so
the SIR
If
the parameter
value is
target
can be decreased
larger,
rapidly,the
andE-DPDCH
the system
transmission
power
will be
capacity can be
increased,
larger.Accordingly,
it will
but the service quality
will be
Parameter
This
improve
service quality
affected.theFunction:
parameter
indicates
theSIR
but
the
systemhe
Turnaffect
off this
switch,
additional
SIR
target
down
capacity.
target can be decreased
only
step
size
of
the
SIR
target
If
the
parameter
value
is
when TB number is reach
rapid
convergence
function.
smaller,
the E-DPDCH
BLERAccpPeriod
and
error
Configuration
Rule:
It
needs
transmission
will
be
TB number ispower
less then
to
consider
the
quality,
smaller.
Accordingly,
itThis
will
Parameter
Function:
ErrorThresh,
soservice
the SIR
the
system
capacity.
improve
thebe
system
capacity
parameter
indicates
uplink
target
can
decreased
If
the
parameter
is
too
big,
the
but
affect
the
service
quality.
SIR
target
size for
R99.
slowly,
andstep
the system
SIR
target
will
be
decreased
Note:
Now,
the
E-DCH
HARQ
Configuration
Rule:
It
needs
capacity will be less, but the
too
rapidly,
itthe
might
affect
the
power
offset
is
related
to
the
to
consider
service
quality,
service
quality
will
be
better.
service
quality.
Parameter
Function:
This
default
E-DCH
user number
the
system
capacity.
Adjustment
Suggestion:
If
the
parameter
is
small,
parameter
indicates
uplink
level
If
the defaulEdchNumLev.
parameter
is too
too
big, the
When
system
uplink
capacity
the
SIR
target
will
be
SIR
target
up
step
size
That
means
the
E-DCH
SIR
target
be adjusted
is limit,
thiswill
function
canfor
betoo
decreased
tooE-TTI)
slowly,
it might
HSUPA
HARQ
offset
rapidly,
it(2ms
might
affectis. the
open. power
affect
the
system
capacity.
Configuration
Rule:
It needs
edchHarqPOFdd[defaulEdch
system
capability.
to
consider
the
service
quality,
NumLev-1].
If
the
parameter
is
too
small,
the
capacity.
the system
SIR target
will beuplink
adjusted
parameter
indicates
If
the
parameter
is size
too big,
the
too
slowly,
it might
affect
SIR
target
up
step
forthe
SIR
target
will
be
adjusted
too
service quality.
HSUPA
(10ms E-TTI) .
rapidly,
it mightRule:
affect
Configuration
It the
needs
system
capability.
to
consider
the
service
quality,
Parameter
Function:
If
the
parameter
is tooThis
small,
the
system
capacity.
parameter
indicates
the
target
the
SIR
target willisbe
If
the
parameter
tooadjusted
big, the
number
of
HARQ
too
slowly,
it might
affect the
SIR
target will
be adjusted
too
retransmission.
service
quality.
rapidly,
it
might
affect
the
system
capability.
to consider
the service quality,
If the
parameter
is too small,
the
system
capacity.
Parameter
Function:
This
the
SIR
target willisbe
adjusted
If
the
parameter
too
big,
the
parameter
indicates
the
target
too
slowly,
it
might
affect
the
number
of
HARQ
rate
of error
frame (2ms Eservice
quality.
retransmission
is too big, it
TTI) .
might
affect
the
service
Configuration Rule:
It needs
quality.
to
consider the service quality,
If
the
parameter
is too small,
the
system
capacity.
itIf might
affect
the
the parameter issystem
too big, it
capability.
might affect the service
quality.
it might affect the system
capability.
N/A
New connection
or new radio link

system capacity are
default value.
New connection
or new radio link
N/A
New connection
N/A
New connection

parameter considers service
quality as priority.
New connection
or new radio link

system capacity are
default value.
Immediately

or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
No
No
No
No
No
No
No
Yes
No
No
No
No

parameter indicates the target
rate of error frame (10ms ETTI) .
to consider the service quality,
Parameter
the system Function:
capacity. This
parameter
indicates
thebig,
BER
If the parameter
is too
it
target
up threshold.
might affect
the service
Configuration
Rule: It needs
quality.
to
consider
the
quality,
If the parameterservice
is too small,
the
system
capacity.
it might affect
the system
Parameter
Function:
This
If
the parameter
is too
it
capability.
parameter
indicates
thebig,
BER
might affect
service
target
down the
threshold.
quality.
If
parameter
is too small,
tothe
consider
the service
quality,
itthe
might
affect
the
system
Parameter
Function:
This
system capacity.
capability.
parameter
indicates
thebig,
time
If the parameter
is too
it
window
size
in
the
BER
algorithm.
quality.
Configuration
Rule:
It needs
If the parameter
is too
small,
Parameter
Function:
This
to
consider
thethe
number
of TTI
it might
affect
system
parameter
with
data. indicates the TTI
capability.
threshold
of opening
If the parameter
is tooBER
big, it
algorithm
is too hard to trigger the BER
Configuration
Rule: It needs
algorithm.
to
consider
the
number
of TTI
If the parameter
is tooThis
small,
Parameter
Function:
with
data
and
the
time
itparameter
is too
easy
to
trigger
the
indicates the TTI
window
size.
BER
algorithm.
threshold
of closing BER
If the parameter is too big, it
algorithm
is
too easy to trigger
BER
Configuration
Rule: Itthe
needs
algorithm.
the number
of TTI
Parameter
This
If
thedata
parameter
too
small,
Parameter
Function:
This
with
and
theistime
parameter
indicates
the
itswitch
is toofor
hard
to trigger
the
parameter
indicates
The
window
size.
priority
outer
loop
BER
algorithm.
number
threshold
of
trigging
If the parameter
power
control. is too big, it
SIRtarget
is
too hardadjustment.
to close
Configuration
Rule: the
ThisBER
Configuration
Rule:
It needs
algorithm.
function mainly consider
the
to
consider
the service
quality,
If the
parameter
is too small,
system
capacity.
the
capacity.
it is system
toothe
easy
to close
BER
When
switch
is on,the
if the
If
the
parameter
is too big, it
algorithm.
windup
happen, which
might
affect
the
system
indicated
that
the
SIR can not
capacity.
reach the SIR target, the
If
the parameter
too small,
priority
outer loopispower
itcontrol
might can
affect
service
bethe
triggered
quality.
based on the SIR error F
event, it avoid the SIR target
being increased too much, so
itThis
canparameter
reduce theindicates
time for the
SIR
Parameter
Function:
This
is
target
decreasing
after
the
Power
Control
Related
to
service
type
identification
radio
condition
become good.
Service
Object ID
parameter.
In this way, the system
Configuration
Rule:
Different
capacity
can
be
improved.
Parameter
Function:
This
services
which
are
Adjustment
Suggestion:
If the
parameter
indicates
the
step
distinguished
byhappen,
traffic class,
windup
always
this
of
increasing
the uplink
SIR
CN
domain
indicator,
direction
function
be list
switch
on.
target
forcan
white
users.
and maximum
bit rate
should
Configuration
It needs
have different Rule:
service
type
to
consider
the
service
quality,
identification.
Parameter
Function: This
the
system
capacity
Adjustmentindicates
Suggestion:
parameter
the step
If
parameter
too
Primary
key can
not
beis SIR
ofthe
decreasing
thevalue
uplink
large,
the
SIRtarget
will
be
modified.
target for white list users.
increased too Rule:
higherthe
to waste
Configuration
the
power
resource
affecting
service
quality,
the system
the
system capacity;
capacity
If
the
If the parameter
parameter value
value is
is too
too
small,
the
SIRtarget
will
be
large, the SIRtarget will be
increased
decreasedtoo
tooslow
lowertotoaffect
affect
the service
service quality;
quality;
the
small, the SIRtarget will be
decreased too slow to waste
the power resource affecting
the system capacity;

or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
The BER algorithm is

triggered at the right time.
New connection
or new radio link
The BER algorithm is

triggered at the right time.
New connection
or new radio link
The BER algorithm is closed New connection

at the right time.
or new radio link

or new radio link
system capacity.
The system capacity is also New connection

good when the function is off. or new radio link
N/A
can not be
modified
N/A
Can't Modify

and the system capacity are New connection
or new radio link
default value.
or new radio link
default value.
No
No
Yes
No
No
No
No
No
No
No
No
No
Parameter
Function:
Thiswhite
the uplink SIR
target for
parameter
list users. indicates the
maximum
stepRule:
size of
Configuration
It needs
increasing
the
uplink
SIR
to consider the service
quality
target.
and the system capacity
Configuration
Rule:
It needs
If the parameter
value
is too
to
consider
the service
quality
large,
the uplink
SIR target
and
system accuracy
capacity. will be
decreasing
If
the
parameter
value
is too
too
low.
Accordingly
it will
large,
the
SIR
target
affect the demodulation
Parameter
Function: This
increasing
step
size
will
be
performance,
and
it will
affect
parameter
indicates
whether
Parameter
Function:
This
too
big
when
consecutive
the
service
quality.
uplink outerindicates
loop power
parameter
the SIR
error
or consecutive
If
the TB
parameter
value
is too
control
(OLPC)
based
on
maximum
downlink
DPCH
target
increasing
occurs.
small,
the
uplink
SIR
target
SIRtarget
adaptive
down
step
transmission
for white
Accordingly,
itpower
will
improve
the
decreasing
rate
will
be
too
size
is
used
or
not
for
white
list
users.
service
quality
but
affect
the
slow.
Accordingly
it will
affect
list
users.
Configuration
Rule:
It needs
system
capacity.
the
system
capacity.
Configuration
Rule:
It
needs
consider
the service
quality
If
parameter
value
is too
When
swchAdaptiveStep=0,
tothe
consider
service
quality
and
cell
capacity.
small,
the
SIR
target
this
parameter
is
invalid.
and
system
capacity.
Parameter
Function:
This
The
configure
principle
isbeto
increasing
step
size
will
If
the switch
is on,
SIR
parameter
indicates
thetarget
ensure
the
power
satisfy
the
not
big enough
decrease
wouldwhen
be DPCH
rapidly
minimum
downlink
minimum
requirement
for
the
consecutive
error
TBfor
when
service
quality
isorgood,
transmission
power
white
UE
in
the
margin
of
the
cell,
it
consecutive
SIR target
and
system
capacity
would
be
list
users.
means
that
it
can
conquer
the
Parameter
Function:
This
increasing
occurs.
increased.
Configuration
Rule:
Itthe
needs
maximum
loss.
parameter path
indicates
Accordingly,
it will
improve
the
If
the
switch
is
off,
SIR
target
to
consider
the
call
drop
rate
Adjustment
Suggestion:
quality
factor
of
the
UL
system
capacity
but
affect
the
decrease
step isdomain
fixed, of
and
and
capacity.
If
thecell
maximum
power
DPCCH
PILOT
forthe
service
quality.
service
quality
is
relative
Adjustment
Suggestion:
service
too big, the power
white
listisusers.
good.
If
of Rule:
the
ofthe
thisvalue
service
canparameter
get
a very
Configuration
Eb/N0
of
is
too
big,
it
will
make
the
high
power
when
the
radio
DPCCH
PILOT
domain
is
Parameter
Function:
This to
power
cannot
be and
decrease
condition
bad,
it will
different
inisindicates
different
radio
parameter
the
a suitable
level,
and of
it to
will
reduce
the
capacity
the
environment,
it
needs
maximum
allowed
UL
power
Parameter
Function:
This
reduce
the
capacity
of
the
cell.
consider
the
service
quality
for
white listindicates
users. the initial
parameter
cell.
If
thecell
maximum
power
of the
and
capacity.
Configuration
Rule:
It needs
SIR
for
white
list
users.
If
thetarget
value
of small,
the
parameter
service
is
too
the
The
bigger
this
parameter
is,
consider
the itservice
quality
Configuration
Rule:
It
needs
is
too
small,
will
increase
power
of
the
service
might
the
bigger
power
of
the
and
celldrop
capacity.
The
valuenot
to
consider
the
uplink
the
call
rate.
Decrease
satisfy
the
requirement
service,
it will reduce
thein
of
this
parameter
should
synchronization
and
cell
the
power
too
much
may
different
condition.
capacity
of
cell.
ensure
thepower
uplink
coverage.
uplink
capacity.
SIR
make
the
cannot
return
The
smaller
thisInitial
parameter
is,
Adjustment
Suggestion:
target
of
the
service
should
to
normal
level,
so
the
call
the
smaller
power
of
the
If
too the
small
of this
parameter,
near
level
of the
drop
happened.
Parameter
Function:
This
service,
itnormal
will
affect
the
itSIR
willtarget,
reduce
the
quality
of the
this
can
make
parameter
indicates
the
quality
of the service.
uplinkconvergence
services.
initial
of
the
SIR
maximum
uplink
SIR
target
Adjustment
Suggestion:
If
too bigger
of this
parameter,
target
rapidly.
for
white
list
users,
is aimed
When
the
cell
uplink
capacity
itAdjustment
might
increase
theit uplink
Suggestion:
to
avoid
SIR
target
increasing
is
limit,
the
value
of
this
interference
reduce
If
the
valuecan
ofand
this
parameter
Parameter
Function:
Thisthe
too
much.
parameter
be reduced
capacity.
is
too big, itindicates
would
the
parameter
Configuration
Rule:make
Itthe
needs
duly.
The
real
power
bemaximum
increased
much
minimum
uplink
SIR too
target
for
to
consider
the
service
quality
transmission
power
is the to
in
thecell
initial
period
white
list
users,
it isafter
aimed
and
uplink
capacity.
minimum
value
ofdecreasing
service
setup,
and
it would
avoid
SIR
target
Adjustment
Suggestion:
maxUlDpchPwr
and of
thethe
UE
reduce
the
capacity
too
much.
If
this parameter
is too
big, it
transmission
power
ability.
cell.
Configuration
Rule:
needs
might make the
SIR Ittarget
too
If
the
value
of
this
parameter
to
consider
the
service
quality
big, and make the uplink
is toocell
small,
it would
make
the
and
uplink
power
too
big,
itcapacity.
would
affect
Parameter
Function:
The
power
low
in the initial
Adjustment
Suggestion:
the celltoo
capacity.
parameter
thebig,
period
afterindicates
service
setup,
If
is
it
If this
this parameter
parameter
is too
too
small,
transport
channel
BLER
and
it
would
cost
long
time
to
might
make
the
SIR
target
itParameter
might make
the
power
too
Function:
quality
forthe
whiteThis
complete
uplink
cannot
be
decreased
tolista
small
totarget
satisfy
parameter
indicates
the
error
users.
synchronization,
even
make
suitable
value,
and
make
the
requirement
of uplink
receiver
transport
block
number
Configuration
Rule:
In
needs
uplink synchronization
failure.
power
cannot be
decrease
to
demodulation,
and
it
would
threshold
in
outer
loop power
to
consider
the
service
quality
a
suitable
level,
it quality
would
affect
affect
the
service
and
control
using
threshold
and
system
capacity.
the
cell
capacity.
uplink
coverage.
algorithm
for
white
If
is
If the
this parameter
parameter value
is list
toousers.
small,
Configuration
Rule:
Inthe
needs
larger,
will improve
it mightitneed
long time
to
to
consider
service
quality
system
capacity
but
affect
the
increase
thethe
SIR
target
from
and
system
capacity.
service
quality.
the minimum value to normal
If
the
value
is
If
the parameter
parameter
value
is the
working
level, and
affect
larger,
it
is
more
difficult
to
smaller,
it will improve the
service quality.
increase
the
it will
system capacity.
improve the system capacity
increase the SIRtarget.

or new radio link
default value.
system capacity are
default value.
New connection
or new radio link

or new radio link
default value.
The default value has
considered the white user
service quality and cell
capacity.
call drop rate and cell
capacity.
Eb/N0 of DPCCH PILOT
domain is different in different
radio environment,
considering the balance of
capacity, so we take the
average value.
For the UE maximum power
is 24dBm, so the default
value 33dBm is not to limit
the UE uplink power.
considered the uplink
synchronization and cell
uplink capacity.
Rate Level
Change
Rate Level
Change
New connection
Rate Level
Change
Ongoing
connection

Ongoing
service quality and cell uplink connection
capacity.
Ongoing
service quality and cell uplink connection
capacity.
New connection
default value.
New connection
default value.
No
No
No
No
No
No
No
No
No
No
No
Yes

using threshold algorithm for
white list users.
Parameter
Function:
Configuration
Rule: InThis
needs
parameter
thequality
to considerindicates
the service
threshold
of capacity.
HARQ failure
and system
indication
number
to increase
If the parameter
value
is
SIR
target
white
list users
larger,
it is for
more
difficult
to
when
E-TTI=10ms.
decrease
the
Parameter
Function: This
Configuration
Rule: Itthe
needs
it will
parameter
indicates
to
consider
the
service
quality
improve
the
service
quality
threshold of HARQ failure
and
system
capacity.
but
affect
the
system
indication number to increase
If
thetarget
parameter
value
capacity.
SIR
for white
listisusers
larger,
it is more
difficult
Parameter
Function:
This
If the parameter
value
isto
when
E-TTI=2ms.
increase
the
parameter
indicates
the
smaller, it is more
easier
to
Configuration
Rule:
It needs
will
number
ofthe
HARQ
decrease
to
consider
theSIRtarget.
service itquality
improve
the capacity.
system
capacity
retransmission
(NHR)
Accordingly,
it will
improve
the
and system
but
affect
the
service
quality.
threshold
to
decrease
SIR
system
capacity
but
affect
the
If
the parameter
value
isto
target
for
list
users
service
larger,
itquality.
iswhite
more
difficult
Parameter
Function:
This
smaller,
itthe
isindicates
more easier
when
E-TTI=10ms.
increase
parameter
the to
increase
SIRtarget.
Configuration
Rule: It needs
it will
number
ofthe
HARQ
Accordingly,
it
will
improve
the
to
consider
the
service
quality
improve the system
capacity
retransmission
(NHR)
service
quality
but
affect
the
and
system
capacity.
but affect to
theincrease
service quality.
threshold
SIR
system
capacity.
If
value
is
If the
the parameter
parameter
value
is
target
for
white list
users
larger,
it
is
more
easier
toto
Parameter
Function:
This
smaller,
it
is
more
easier
when E-TTI=10ms.
decrease
the
parameter
indicates
increase the
SIRtarget.
Configuration
Rule: Itthe
needs
itquality
willthe
threshold
ofthe
sample
number
Accordingly,
it will
improve
to
consider
service
improve
the
system
capacity
to
increase
SIR
target
forthe
service
quality
but
affect
and
system
capacity.
but
affect
the service
quality.
white
listcapacity.
users
when
system
If
the
parameter
valueEis
Parameter
Function:
This
If
the parameter
value
isto
TTI=10ms.
larger,
it is more
difficult
parameter
indicates
the
smaller,
it
is
more
difficult
to
Configuration
Rule:
It
needs
increase the
threshold
of
sample
number
decrease
the
SIRtarget.
to
consider
the
service
itquality
will
to
decrease
SIR
for the
Accordingly,
it willtarget
improve
and
system
improve
the capacity.
system
capacity
white
list
users
when
Eservice
quality
but
affect
If
the
parameter
valuequality.
is the
but
affect
the service
TTI=10ms.
system
capacity.
larger,
it
is
more
difficult
Parameter
Function:
If the parameter
valueThis
isto
Configuration
Rule:
It
needs
increase
the
parameter
indicates
the
to
consider
the
service itquality
will
number
ofthe
HARQ
increase
SIRtarget.
and
system
capacity.
improve
the system
capacity
retransmission
(NHR)
Accordingly,
it will
improve
the
If
the
parameter
value
is the
but
affect
thedecrease
service
quality.
threshold
to
SIR
service
quality
but
affect
larger,
itcapacity.
iswhite
morelist
difficult
If
the parameter
value
isto
target
for
users
system
Parameter
Function:
This
decrease
the
smaller,
it
is
more
easier
to
when E-TTI=2ms.
parameter
indicates theit will
increase
the
SIRtarget.
Configuration
Rule:
It
needs
number
of
improve
theHARQ
service
quality
Accordingly,
it will
improve
the
to
consider
the
service
quality
retransmission
(NHR)
but
affect
the
system
service
quality
but
affect
the
and
system
capacity.
threshold
to increase SIR
capacity.
system
capacity.
If
the parameter
value
is
target
for
white
list
users
If
the parameter
value
isto
larger,
it
is
more
easier
Parameter
Function:
This
when
E-TTI=2ms.
smaller,
it
is
more
easier
to
decrease the
parameter
indicates
Configuration
Rule: Itthe
needs
decrease
the
SIRtarget.
it
will
threshold
ofthe
sample
number
to
consider
service
quality
Accordingly,
it will
improve
improve
theFunction:
system
capacity
to
increase
SIR
target
for the
Parameter
This
and
system
capacity.
system
but affect
the
but
affect
the
service
quality.
white
listcapacity
users
when
Eparameter
indicates
whether
If
the
parameter
value
is
service
quality.
Parameter
Function:
This
If
the parameter
isto
TTI=2ms.
uplink
outer
loopvalue
power
larger,
it is more
difficult
parameter
indicates
the
smaller,
it
is
more
difficult
to
Configuration
Rule:
It
needs
control
(OLPC)
based
on
QE
increase the
threshold
sample
number
decrease
the
SIRtarget.
to
consider
the
is
used
or of
not
inservice
the valid
time
itquality
will
to
decrease
SIR
forifthe
Accordingly,
it willtarget
improve
and
system
capacity.
window
for
list
user
improve
thewhite
system
capacity
white
list
users
when
Eservice
quality
but
affect
If
the
parameter
valuequality.
is the
the
FP
Mode
silent.
but
affect
the is
service
TTI=2ms.
system
capacity.
larger,
it
is
more
difficult
Configuration
Rule:
The
value
If the parameter
value
isto
Configuration
Rule:
It
needs
increase
the
of
this
parameter
should
to
consider
service
itquality
will
consider
thethe
service
quality
increase
SIRtarget.
and
system
capacity.
improve
the capacity.
system
capacity
and
system
Accordingly,
it will improve
the
If
the
parameter
value
is the
but
affect
theswitch,
service
quality.
Turn
on
this
when
TB
service
quality
but
affect
larger,
itcapacity.
is less
morethen
difficultisto
If
the parameter
value
number
is
system
decrease
the
smaller,
it
is
more
easier
blerAccpPeriod, the
SIR to
it will
increase
target
canthe
beSIRtarget.
decreased
improve
quality the
Accordingly,
itphysical
will improve
based
onthe
theservice
but
affect
the system
service
quality
butthe
affect
channel
BER,
so
SIRthe
capacity.
systemcan
capacity.
target
be decreased
If
the parameter
value is
rapidly,
and the system
smaller,
it
is
more
easier to
capacity can be increased,
decrease
the SIRtarget.
but
the service
quality will be
Accordingly,
it will improve the
affected.
system
capacity
but he
affect
Turn off this switch,
SIRthe
service
quality.
target can be decreased only
when TB number is reach
blerAccpPeriod and error TB

New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
New connection
default value.
service quality as priority for
white list user.
New connection
or new radio link
No
No
No
No
No
No
No
No
No
No
No
No
Windows when the FP mode

is
silent, which
is the This
base of
Parameter
Function:
outer
loop
power
control
method
physical
number using
threshold
of physical
channel
channel BER.
BER less than or
Configuration
Rule:
needs
equal BER target
in Itthe
uplink
to
consider
the
service
outer loop power controlquality
BER
and
system
capacity.
Parameter
Function:
This list
based
algorithm
for white
If
the parameter
value
parameter
indicates
theisEusers.
larger,HARQ
it is more
easier
to
DCH
power
offset
Configuration
Rule:
It needs
decrease
the
FDD
for white
users,quality
to consider
thelist
service
it will
which
is used
to compute
the
and system
capacity.
improve
the
system
capacity
quantized
gain
factor
ed
If the parameter value is of
but
affect
service
quality.
E-DPDCH.
larger,
it isthe
more
difficult
to
If
the
parameter
value
is
Configuration
Rule:
It
needs
Parameter
Function:
This
decrease the
smaller,
it isindicates
more
difficult
to
to
consider
the
service
parameter
theitquality
initial
will
Parameter
Function:
This
decrease
the
SIRtarget.
and
system
capacity.
value
forthe
BLER
based
SIR
improve
service
quality
parameter
indicates
theisrapid
Accordingly,
itsystem
willvalue
improve
the
If
the
parameter
target
in the
SIR
target
but
affect
the
additional
SIR
target
down
service
quality
but
affect
the
larger,
the
E-DPDCH
convergence
function.
capacity.
step
of the
SIR
target
system
capacity.
transmission
power
will
Configuration
Rule:
It
needs
If thesize
parameter
value
isbe
rapid
convergence
function.
Parameter
Function:
This
larger.Accordingly,
it
will
to
consider
the
uplink
Configuration
Rule:
needs
parameter
indicates
the
initial
improve
service
synchronization
andItquality
cell
decreasethe
the
SIRtarget.
to
consider
the
service
quality,
value
for
additional
SIR
target
but
affect
theitsystem
uplink
capacity.
Accordingly,
will improve
the
the
system
capacity.
in
the
SIR
target
rapid
capacity.
If
the
value
of thisbut
parameter
system
capacity
affect the
If
the
is
too is
big,
convergence
function.
If
the
parameter
value
is
too parameter
big,
it would
make
thethe
service
quality.
SIR
target
will
be decreased
Configuration
Rule:
Ittoo
needs
smaller,
E-DPDCH
power
bethe
increased
much
too
rapidly,
might
affect
to
consider
uplink
transmission
power
will bethe
in
the
initial itthe
period
after
service
quality.
synchronization
andit cell
smaller.setup,
Accordingly,
it will
service
and
would
If
the parameter
is too
uplink
capacity.
improve
thecapacity
system
capacity
reduce
the
of small,
the
the
SIR
target
will be
If
the
value
of service
this
parameter
but
affect
the
quality.
cell.
decreased
slowly,
it might
is
too value
big, ittoo
would
make
the
If the
of
this
parameter
affect
the
system
capacity.
power
be increased
too
much
is
too small,
it would
make
the
in
the initial
period
after
power
too low
in the
initial
Parameter
Function:
This
service
setup,
and itsetup,
would
period after
service
parameter
indicates
uplink
reduce
the
capacity
of
the to
and it would cost long time
SIR
target
step
size
for
R99.
cell.
complete uplink
Configuration
Rule:
It
needs
If
the
value
of
this
parameter
synchronization, even make
to
consider
the
service
quality,
is
too
small,
it would
make
the
uplink
synchronization
failure.
Parameter
Function:
This
the
system
capacity.
power
too low
in the initial
Adjustment
Suggestion:
parameter
indicates
uplink
If
the parameter
is
too
big,
period
after
service
setup,
Initial
SIR
target
based
on the
SIR
target
up
step
size
for
SIR
target
will
be
adjusted
too
and
it
would
cost
long
time
to
BLER
of(2ms
the service
should
HSUPA
E-TTI)
. the
rapidly,
it
might
affect
complete
uplink
near
the normal
level
the
Configuration
Rule:
It of
needs
system
capability.
synchronization,
even
make
SIR
target
which
meet
the
to
consider
the service
quality,
If
the
parameter
is tooThis
small,
Parameter
Function:
uplink
synchronization
failure.
need
of
service
BLER
target.
the
system
capacity.
the
SIR
target
will
be
adjusted
parameter
indicates
uplink
Adjustment Suggestion:
If
the
parameter
is size
too big,
the
too
slowly,
itfor
might
affect
SIR
target
step
forthe
Initial
valueup
additional
SIR
SIR
target
will
be
adjusted
too
service
HSUPA
(10ms
E-TTI)can
. be a
target ofquality.
the service
rapidly,
mightRule:
affect
Configuration
It the
needs
little bigitwhen
the
call
setup
system
capability.
to
consider
the
service
quality,
success
rate
is
low.
Parameter
Function:
If
the
parameter
is tooThis
small,
the
system
capacity.
parameter
indicates
the
target
the
SIR
target willisbe
If
the
parameter
tooadjusted
big, the
number
of
HARQ
too
slowly,
it might
affect the
SIR
target will
be adjusted
too
retransmission.
service
quality.
rapidly,
it
might
affect
the
system
capability.
to consider
the service quality,
If
the
parameter
is too small,
the system Function:
capacity.
Parameter
This
the
SIR
target willisbe
adjusted
If
the
parameter
too
big,
the
parameter
indicates
the
target
too
slowly,
it
might
affect
the
number
of
HARQ
rate
of error
frame (2ms Eservice
quality.
retransmission
is too big, it
TTI) .
might
affect
the
service
Configuration Rule:
It needs
quality.
to
consider
the
service
quality,
Parameter
Function:
If
the
parameter
is tooThis
small,
the
system
capacity.
parameter
indicates
the target
itIf might
affect
theissystem
theofparameter
too
big,Eit
rate
error
frame
(10ms
capability.
might
affect
the
service
TTI) .
quality.
If the
parameter
is too small,
to
consider
the service
quality,
itthe
might
affect
the system
system
capacity.
capability.
quality.
it might affect the system
capability.

New connection
default value.
New connection
default value.
New connection
default value.
or new radio link
system capacity.
uplink capacity.
New connection
or new radio link

uplink capacity.
New connection
or new radio link

or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
No
No
No
No
No
No
No
No
No

parameter indicates the BER
target up threshold.
to consider the service quality,
the
system Function:
capacity. This
Parameter
If
the
parameter
is too
it
parameter indicates
thebig,
BER
might affect
service
target
down the
threshold.
quality.
If
parameter
is too small,
tothe
consider
the service
quality,
itthe
might
affect
the
system
Parameter
Function:
This
system capacity.
capability.
parameter
indicates
The
If the parameter
is too
big, it
number
threshold
of
trigging
SIRtarget
quality. adjustment.
Configuration
Rule:
It needs
If the parameter
is too
small,
to
consider
thethe
service
quality,
it might
affect
system
the
system capacity.
capability.
capacity.
Parameter
Function:
Parameter
Function:
This
If the parameter
is tooThis
small,
parameter
indicates
the
parameter
is
the
power
it might affect the service
transmit
diversity
mode used
control
to service
and
quality. related
by
this
set
of
diversity
mode
diversity mode object ID.
and service related power
control parameters.
Configuration Rule: The
configure of this parameter is
Parameter
Function:
based on whether
theThis
parameter
indicates
the is
transmit diversity
mode
maximum
downlink
DPCH
used, and which mode is in
transmission
power.
use.
Configuration
Rule: It needs
consider
the can
service
quality
Primary key
not be
and
cell capacity.
modified
The configure principle is to
ensure the power satisfy the
minimum requirement for the
UE in the margin of the cell, it
means that it can conquer the
maximum path loss.
If the maximum power of the
service is too big, the power
Parameter
Function:
of this service
can getThis
a very
parameter
indicates
high power when thethe
radio
minimum
downlink
DPCH
condition
bad, and
it will
Parameteris
Function:
This
transmission
power. of
reduce the indicates
capacity
parameter
thethe
Configuration
It needs
cell. offset ofRule:
power
DL DPCH
to
consider
the
call
drop
If the domain
maximum
powertoofrate
the
TFCI
relative
and
cell
capacity.
servicedata
is toodomain.
small, the
DPCH
Adjustment
power of theSuggestion:
service
Configuration
Rule: Itmight
needsnot
If
value
of the
parameter
Parameter
Function:
This
satisfy
the requirement
in
tothe
consider
the
service
quality
is
toocell
big,
itindicates
will makethe
the
parameter
different
condition.
and
capacity.
power
cannot
offsetdomain
ofbe
DLdecrease
DPCH
The control
is the to
a
suitable
level,
and
ittowill
TPC
domain
relative
DPCH
foundation to demodulate
the
reduce
the
capacity
of
the
data
domain.
data domain, so the power of
cell.
Configuration
It needs
control domainRule:
is relatively
If
the
value
of
the
parameter
to
consider
the
service
quality
higher than data domain.
is
toocell
small,
it will
increase
and
capacity.
If the
power
of
TFCI
domain
the
call
dropdomain
rate. Decrease
The
control
is the be
is too
small,
TFCI
cannot
the
power
too
much may
foundation
to
demodulate
demodulated correctly,
it the
make
the
power
cannot
data
domain,
so
the
power
of
would affect the service return
to
normal
level,
so
the
call
control
domain
is
relatively
quality.
drop
higher
than data
domain.
If
the happened.
power
of TFCI
domain
If
TPC
domain is
is the
too power
large, itofwill
waste
too
small,
cannot
be
power,
andTPC
affect
the cell
demodulated
correctly, it
capacity.
would
affectSuggestion:
the service
Adjustment
quality.
When the cell downlink
If
the power
of TPC
capacity
is limit,
the domain
value of is
too
it will can
waste
this large,
parameter
be power,
and
affect
the cell capacity.
reduced
duly.

or new radio link
system capacity.
or new radio link
system capacity.
or new radio link
system capacity.
N/A
Can't Modify
N/A
Can't Modify

Rate Level
considered the service quality
Change
and cell capacity.

Rate Level
considered the call drop rate
Change
and cell capacity.

considered the service quality New connection
and cell capacity.
DynaUpdtPO2Stc
h=0: New
connection;
DynaUpdtPO2Stc
and cell capacity.
h=1: Rate Level
Change
No
No
No
No
No
No
to consider the service quality

and cell capacity.
The control domain is the
foundation to demodulate the
data domain, so the power of
control domain is relatively
higher than data domain.
If the power of PILOT domain
is too small, PILOT cannot be
demodulated correctly, it
would
affectFunction:
the service
Parameter
This
quality.
If
the power
quality
factorofofPILOT
the ULdomain
is
too large,
it will
waste
DPCCH
PILOT
domain.
power,
and
affect
theEb/N0
cell of
Configuration Rule:
capacity.
DPCCH PILOT domain is
Adjustment
Suggestion:
different in different
radio
When
the
cell
environment, itdownlink
needs to
capacity
limit,
the value
consider is
the
service
qualityof
this
parameter
can
be
and cell capacity.
reduced
duly.
The bigger
this parameter is,

consider the service quality
and cell capacity.
New connection
Eb/N0 of DPCCH PILOT

domain is different in different
radio environment,
the bigger power of the
considering the balance of
New connection
service, it will reduce the
capacity of cell.
capacity, so we take the
The smaller this parameter is, average value.
Parameter
This
the smaller Function:
power of the
parameter
indicates
the initial
service, it will
affect the
maximum
allowed
UL power
SIR
target.
quality
of the
service.
Configuration
Rule:
It needs
consider
the
service
to
consider
the
uplink
When the cell uplink quality
capacity
and
cellthe
capacity.
The
value
synchronization
cell
is limit,
valueand
of
this
of
this capacity.
parameter
should
uplink
Initial
SIR
parameter
can be
reduced
ensure
coverage.
target
theuplink
service
should
duly. ofthe
Adjustment
Suggestion:
For the maximum power of
near
the normal
level of the
If tootarget,
small this
of this
SIR
canparameter,
make the the most UE is 24dBm, so
Rate Level
it will reduce
the quality
initial
convergence
of theofSIR the default value 33dBm is
Change
uplink rapidly.
services.
not to limit the UE uplink
target
uplink capacity. For the
If too biggerSuggestion:
of this parameter, power.
Adjustment
services whose MBR bigger
it might
increase
uplink
If
the value
of thisthe
parameter
Ongoing
then 2.048Mbps, the normal
interference
and reduce
is
too big, it would
make the
connection
level of SIR target is about
capacity.
power
be increased too much
7dB, so the default value is
Parameter
Function:
This
The
maximum
in
thereal
initial
period after
8dB. The default SIR target
parameter
indicates
the
transmission
the
service
setup,power
and itiswould
of other services also is near
maximum
uplink
minimum
ofSIRoftarget,
reduce thevalue
capacity
the it
their SIR target normal level.
is
aimed to avoidand
SIRthe
target
maxUlDpchPwr
UE
cell.
increasing
much.
transmission
ability.
If
the valuetoo
ofpower
this
parameter
Configuration
needsthe
is too small, it Rule:
wouldItmake
to
consider
theinservice
quality
power
too low
the initial
and
cell
uplink
capacity.
period after service setup,
Adjustment
and it wouldSuggestion:
cost long time to
If
this parameter
complete
uplink is too big, it The default value has
Ongoing
might
make the SIR
target
synchronization,
even
maketoo considered the service quality connection
big,
and
make the uplink
uplink
synchronization
failure. and cell uplink capacity.
power too big, it would affect
Parameter
Function: This
the cell capacity.
parameter
indicates
thesmall,
If this parameter
is too
minimum
uplink
target,
it might make
theSIR
power
tooit
is
aimed
to avoid
small
to satisfy
theSIR target
decreasing
much. receiver
requirementtoo
of uplink
Configuration
needs
demodulation,Rule:
and itItwould
to
consider
the service
affect
the service
qualityquality
and
and
cell
uplink capacity.
uplink
coverage.
If this parameter is too big, it
might make the SIR target
Ongoing
cannot be decreased to a
connection
and cell uplink capacity.
suitable value, and make the
power cannot be decrease to
a suitable level, it would affect
the cell capacity.
If this parameter is too small,
it might need long time to
increase the SIR target from
the minimum value to normal
No
No
No
No
No
No
No
No
No
No
No
No
configured for E-AGCH in

2ms
E-TTI.Function: This
Parameter
Configuration
Rule: This
parameter indicates
the
parameter
should
ensure
power offset relative
to DLthe
E-AGCH
power
(for
2ms
TTI)
DPCH pilot domain
large
enough
to
satisfy
the
configured for E-AGCH in
minimum
requirement
for EParameter
Function: This
10ms
E-TTI.
AGCH
detection
(BLER
parameter
indicates
the equal
Configuration
Rule:
This
or
below
1%
in 3GPP
power
offset
relative
to25.101
DLthe
parameter
should
ensure
protocol)
.
And
it
also
needs
DPCH
pilot
domain
E-AGCH power (for 10ms
to
consider
theE-RGCH
system
configured
for
in
TTI)
large enough
to satisfy
capacity.
2ms
E-TTI
and
single
link
the minimum
requirement
Parameter
Function:
This for
If
this parameter
is (BLER
too
condition.
E-AGCH
detection
parameter
indicates
thesmall,
the
minimum
requirement
Configuration
Rule:
equal
or
below
1% inThis
power
offset
relative
to3GPP
DL for
E-AGCH
performance
could
parameter
should
ensure
the
25.101 pilot
protocol)
. And it also
DPCH
domain
not
be
satisfied.
E-RGCH
power
(for
2ms
TTI)
needs to consider
the system
configured
for E-RGCH
in
If
this enough
parameter
is too big,
it
large
to satisfy
the
capacity.
10ms
E-TTI
and
single
link
Parameter
Function:
This
would
waste
the
power,
and
minimum
requirement
for
EIf
this parameter
is too
condition.
parameter
indicates
thesmall,
affect
the
system
RGCH
(MISS
UP capacity.
equal
or
the
minimum
requirement
Configuration
Rule:
This
power
offset
relative
to DL for
below 5%performance
in
3GPPensure
25.101
E-AGCH
could
parameter
should
the
DPCH
pilot
domain
protocol)
.power
And
it(for
also10ms
needs
not
be
satisfied.
E-RGCH
configured
for
in 2ms
to
consider
theE-HICH
system
If
this
parameter
is
too
big, it
TTI)
large
enough
to
satisfy
E-TTI
and
single
link
Parameter
Function:
This
capacity.
would
waste
the
power,
and
the
minimum
requirement
for
condition.
parameter
indicates
thesmall,
If
this parameter
iscapacity.
too
affect
the
system
E-RGCH
(MISS
UP
equal
or
Configuration
Rule: This
power
offset
relative
to DL for
the
minimum
requirement
below
5%
in
3GPP
25.101
parameter
should
ensure
the
DPCH
pilot
domain
E-RGCH .performance
could
protocol)
And (for
it also
needs
E-HICH
power
2ms
TTI)
configured
for
E-HICH
in
not
be satisfied.
to
consider
theto
system
large
enough
satisfy
the
10ms
E-TTI
and
single
link it
If
this
parameter
is
too
big,
capacity.
minimum
requirement
for
Econdition.
would
waste
the
power,
and
If
this parameter
isequal
too
small,
HICH
(MISS
ACK
or
Parameter
Function:
This
Configuration
Rule:
This for
affect
the system
capacity.
the
minimum
requirement
below
1% in
25.101
parameter
is 3GPP
MBMS
related.
parameter
should
ensure
theIt
E-RGCH
could
protocol)
.performance
And
it also
needs
is SCCPCH
power
for
single
E-HICH
power
(for
10ms
TTI)
not
be
satisfied.
Parameter
Function:
This
to
consider
thetosystem
cell
reception.
large
enough
satisfy
the it
If
this
parameter
is too
big,
parameter
is
MBMS
related.
capacity.
Configuration
Rule:
It
needs
minimum
requirement
for
E- It
would
waste
the power,
and
is
SCCPCH
power
for
cell
If
this
parameter
is
too
small,
consider
the
MBMS
service
HICH
(MISS
ACK capacity.
equal or in
affect
the
system
half-island
status.
the
minimum
requirement
for
quality
and
cell
capacity
Parameter
Function:
Thiswhen
below 1% in 3GPP 25.101
Configuration
Rule:
needs
E-HICH
performance
could
the
cell in
status.
parameter
indicates
initial
protocol)
. single
And
it cell
alsoItthe
needs
consider
the
MBMS
service
not
befor
satisfied.
Adjustment
Suggestion:
The
value
BLER
based
SIR
to consider
the
system
quality
and
cell
capacity
when
If
this
parameter
is
too
big,
it
cell
is in single
cell
status
target
the SIR
target
rapid
capacity.
the
cell
in
half-island
status.
would
waste
the
power,
and
means
no
soft
or
selective
convergence
function.
If this parameter
is too small,
Adjustment
Suggestion:
The
affect
the system
combining
gain,
socapacity.
the
Configuration
Rule:
It needs
the minimum
requirement
for
cell
is
in
half-island
status
Parameter
Function:
This
SCCPCH
power
should
be
to
consider
the
uplink
E-HICH performance could
means
few
neighboring
parameter
initial
relative
big.indicates
synchronization
and the
cellcells
not be satisfied.
are
transmitting
the
same
value
for
additional
SIR
target
If
uplink
capacity. is
If this
this parameter
parameter
is too
too small,
big,
it
MBMS
service
and
gain and
of
in
the value
SIR
target
rapid
itIf
would
affect
the
MBMS
the
ofthe
this
parameter
would
waste
power,
soft
selective
combining
convergence
function.
service
quality
when
the cell
is
tooorbig,
it would
make
theis
affect
the
system
capacity.
small,
so
the
SCCPCH
power
Configuration
Rule: Ittoo
needs
in single
status.
power
becell
increased
much
cannot
be too
small.
to
consider
the
uplink
If this
parameter
is after
too big, it
in
the
initial
period
If
this
parameter
iscell
small,
synchronization
and
cell
would reduce
service
setup, the
and
ittoo
would
itreduce
would
affect
the
MBMS
uplink
capacity.
capacity.
the capacity of the
service
quality
when
the cell
If
the value
of this
parameter
cell.
in
half-island
status.
is
too
big,
it
would
make
the
If the value of this parameter
If this
parameter
is too
big,
it
power
be increased
too
much
is
too small,
it would
make
the
would
reduce
the
cell
in
the initial
period
after
power
too low
in the
initial
capacity.
service
setup,
and itsetup,
would
period after
service
When
the
notlong
support
reduce
thecell
capacity
of time
the to
and it would
cost
MBMS,
this
parameter
is
cell.
complete uplink
invalid.
If
the
value
of
this
parameter
synchronization, even make
is
too small,
it would make
the
uplink
synchronization
failure.
power
too low
in the initial
Adjustment
Suggestion:
This
indicates
period
after
service
setup,
Initialparameter
SIR
target
based
on
reference
to
Module
object.
and
it
would
cost
long
time to
BLER of the service should
complete
uplink level of the
near the normal
synchronization,
even
Function:
Instant
SIR targetProc
which
meet make
the
uplink
failure.
Number
that theBLER
NODEB
need ofsynchronization
service
target.
Adjustment
Suggestion:
belongs
to; Influence
factor:
Initial
value
for additional
SIR
the value
should
set by the
target
of
the
service
can
be
a
network
little big when the call setup
success rate is low.

E-AGCH performance
considered
system
The default the
value
can satisfy
capacity.
E-AGCH performance
considered
system
The default the
value
can satisfy
capacity.
E-RGCH performance
considered
system
The default the
value
can satisfy
capacity.
E-RGCH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered
system
The default the
value
can satisfy
capacity.
E-HICH performance
considered the system
capacity.
considered the MBMS
capacity when the cell in
single cell status.
considered the MBMS
capacity when the cell in halfisland status.
Next Radio Link

Setup Request or
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Link ReNext
Radio Link
configuration
Setup Request or
Request
Next Radio Link
Addition Request
or Next Radio
Request
Immediately
Immediately

uplink capacity.
New connection
or new radio link

uplink capacity.
New connection
or new radio link
N/A
At next use
N/A
Immediately
No
Yes
Yes
Yes
No
No
No
No
NO
Yes
No
No

indicates the control method
to share the HS-PDSCH
The
parameter codes
is configured
channelization
among
Configuration
Rule:
Generally,
according
the
transmission
the cells oftothe
same
NodeB.
this
parameter
is set
to
delay
from SRNC
toHSDPA
NodeB,
Configuration
Rule:
"General
NodeB"
including:
traffic load of the cells of the
Suggestion
setting
this
It
isThe
set
to befor
"Support
HS1:
value
20
is configured
same
NodeB
The
protocol
parameter
parameter:
not
suggest
to
Congestion
Detection"
ifDSCH
the
transmission
Adjustment
Suggestion:
TOAWS is configured If the
adjust
in
the
following
cases:
environment
is
about
LEO
total
HSDPA
traffic
load
according to the OMCR of the
1:
The
NodeB
the
(Low
Earth
Orbit)
or theand
cells
of
the same
NodeB
is
parameters
of supports
TOAWS
HS-DSCH
congestion
control
transmission
delay
is
not
not
higher
than
the
maximum
jitter.
The
of the
It
is set
tooffunction
be
"Support
E-DCH
function.
more
than
20ms
.cells,
capacity
these
the is
protocolparameter
TOAWS
Congestion
Detection"
parameter
of
2:
The
value
100
is
parameter
could
be setintothe
to
control
the
earliest
following
cases:
TimeDelay
configured
aa
configured
ifis
the
transmission
"Sharing".
acceptable
arrival
time of
1:
The
NodeB
supports
the
appropriate
value
matching
environment
is
about
MEO
This
function
could
save
theEFACH
DATA FP incontrol
a NodeB.
DCH
congestion
the
transmission
environment,
(Medium
Earth Orbit)
or theis
operator
capex.
the
The
parameter
ofBut
TOAWS
function.
or
HS-DSCH
service
rate
may
transmission
hardware
resource
for
configured
according
toeach
the
2:
The
parameter
of
be
dropped
more.
delay
between
SRNC
and
cell is less
than the normal
faculty
of processing
ATimeDelayJitter
isthrough
If
A congestion
control
NodeB
is between
20ms
cell
so the
HSDPA
PCH/FACH/DCH
FPs
in aand
configured
a
appropriate
function
is
configured
to
be
100ms
.
will
be
lower
than
the
normal
RNC.
value
matching
the
"Support",
the
speed
of
a
3:
The
maximum
value
is
cell.
So
it
is
suggested
not
The
parameter
of jitter is to
transmission
environment,
or
service
over
a
related
bearer
configured
if
the
transmission
support
this
function
into
hot
configured
according
the
E-DCH
service
rate
may
be
type
such
as
HS-DSCH
may
environment
is about
GEOa
area.
transport
delay
jitter from
dropped
more.
try
to to
beaadjusted
according
(Geostationary
Earth
Orbit) or
RNC
related
NodeB.
If
Athe
congestion
control
to
transmission
the
transmission
If
the
value
of thedelay
OMCR
function
is
configured
to
be is
environment
between
SRNC
between
SRNC
and NodeB
parameters
of
TOAWS
and
"Support",
the
speed
of
a
and
the
related
NodeB.
more
100ms
.
jitter
isthan
too
small,
NodeB
can
service
over
a the
related
bearer
If
the
value
of
parameter
not
response
a
Timing
type
asthe
E-DCH
may try
is toosuch
small,
maximum
Function:
This
parameter
Adjustment
Control
Frametobit
to
to
be
adjusted
according
rate
of
a
service
may
not
indicates
the period
tobe
update
RNC
in
time,
the
probability
the
transmission
environment
be
fulfilled,
the HS-DSCH/Ethe
HS-PDSCH
code
number
that
a PCH/FACH/DCH
data
between
SRNC
and
the
DCH
congestion
detection
to
share
forsent
eachon
one
of the
can
not
be
uu
related
NodeB.
action
be triggered
more
cells
ofmay
the
same
interface
would
beNodeB.
increased
Parameter
Function:
This
easily
and
the
quality
of
Configuration
Rule:
The
and the quality of service with
parameter
service withindicates
HS-DSCH/Eparameter
should
bethe
set to
PCH/FACH/DCH
channel
balancing
type
of
the
DL RRC
DCH
would
be
dropped.
guarantee
that thetype1,
HSsuch as a paging
power.
If
the
value
of
the
parameter
PDSCH
numberSETUP,
adjustment
CONNECTION
Configuration
Rule:
The
is
tootrack
large,
the
buffer
of value
a
can
the
HSDPA
signalling
and
data
with
of
this
parameter
is
based
on
RNC
and
UE
may
be
applied
throughput
violation
of
FACH/RACH
or downlink
Function:
combination
of soft
whether
need
to
balance
too
high,
the
HS-DSCH/Edifferent
cells,
but
should
not
DCH
would
be This
dropped.
handover
indicator
Main
function:
parameter
power,
and
purpose
of
DCH
congestion
detection
set
too
smallthe
which
may
lead
If
the
value
of
the
parameter
Configuration
Rule:
softer
indicates
the
audit
timer
of
power
balancing.
action
may
be
triggered
less
to
adjust
the
HS-PDSCH
is
too
large,
The
NodeB
handover
combination
gain
Node
B
resource.
According
Adjustment
Suggestion:
easily
and
the
quality
of The
number
over
frequently.
would
store
more
There
are
two
combination
to
the
timer,
RNC
audits
"None"
indicates
there
is
no
service
with
HS-DSCH/Esmaller
this
parameter
is,
the
PCH/FACH/DCH
DATA
FPs
methods
for
uplink
resource
in Node
B max
need
to
balance
the
DL
DCH
would
be
dropped.
more
frequently
the
HSand
the delayofofsoft
service
with
combination
handover:
periodically.
power.
If
the value
of theof
parameter
PDSCH
number
different
PCH/FACH/DCH
channel
one
is
maximum
ratio
Influence
factor:
the in
timer
"Common"
indicates
to RRC
is
configured
falsely
cells
are
such
as of
achanged.
paging
type1,
combination
atNODEB
the
NodeB
interval
the
balance
the
DL
power
but
the
respective
NodeB,
the
action
CONNECTION
SETUP,
Rake
receiver,
which
gives
sending
audit
response
balanced
radio
links
use
the
of
a
soft/hard
handover
would
signalling
and
data with
the
highest
combination
periodically;
system
cost.
same
reference
power.
Itgain;
can
be
processed
falsely
and
the
FACH/RACH
or
downlink
the
other
is
selective
If
the
parameter
is
too
big,
resolve
the
"power
drifting"
quality
of
service
would
be
DCH
would
be
increased
combination
at the
the UE
RNC,
The
RNC
may
can't
getinthe
problem
when
dropped.
more.
which
gives
a
relatively
resource
status status.
of the
macro
diversity
The
protocol
parameter
smaller
combination
gain.
NODEB.
TOAWS
is
configured
When
MAY is selected,
the
If
the parameter
is too small,
according
to adjusting
thetotoo
NodeB
decides
whether
The RNC
may
consumpt
value
themaximum
parameter
of jitter
implement
much of
system
cost. ratio
because the according
RNC's process
combination
to its
faculty
is moreconditions
steady.
own
physical
setting
according transport
When
quality MUST is selected, the
NodeB is forced to carry out
maximum ratio combination
which
is usually
used in tests.
The bigger
the parameter
is,
When
MUST_NOT
is can
the
better
the UTRAN
selected,
is
avoid
the the
cell NodeB
out of service
forbidden
to carry
outATM
for
NCP break
when
maximum. ratio combination
transport
Adjustment suggestion: Not
suggest to adjust

Immediately
to "General NodeB"
Usually, it should be set to

"Not sharing" unless the
operator required to use this
function.
Take effect after

the change is
loaded to the
RNC
The feature of most NodeBs

is not stable, so it is
configured to "not support".
New Session
The feature of most NodeBs

is not stable, so it is
configured to "not support".
New Session
according to the transport

Immediately to
delay from a RNC to a
cell.
related NodeB that ATM/IP is
New Session
usually be used.
delay jitter from a RNC to a
Immediately
usually be used.
Because the Erl or the user
ratio of HSDPA won't change
quickly, the 20 second
update period can satisfy
needs.
The power balancing type
"Common" can resolve the
"power drifting" problem
when the UE in macro
diversity status.
considering all factors: the
timer interval of the NODEB
sending audit response
periodically; system cost.
Take effect after

the change is
loaded to the
RNC
Immediately
Immediately
Combination of soft handover

is considered to define this
New connection
default value.
N/A
Immediately
N/A
Immediately
No
Yes
Yes
Yes
N/A
N/A
N/A
No
No
No
No
No
CE Resource for MultiOperators: Mode 0 indicates"

Minimal CE Percentage
should be guaranteed for
operators whether CE
Resource
congested
or is,
biggeristhe
The function
of parameter
this
not";
Mode
1
indicates
the better the
can
parameter:
CEUTRAN
Share Switch
"Minimal
Percentage
avoid
theCE
cell
out of Ifservice
for Carrier
Sharing.
this
should
guaranteed
for NCPbe
break
when
IPfor
parameter
is set
to "1:
on" ,
operators
when
CE
transport
.only
every
PLMN
can
reserve
Resource
is percent
congested"
minimal CE
in the CE
The
involved
for setting
Share Scene factor
for Carrier
this
parameter: Operator's
Sharing
requirement;
If this
parameterOperator's
is set to "0" ,
this
parameter:
Minimal
CE Percentage
requirement;
should
be guaranteed
If this parameter
is set for
to "1:
operators
whether
CE reserve
on" , every PLMN can
Resource
is percent
congested
or not;
minimal CE
in the
CE
If
this
parameter
is
set
to
Share Scene
forparameter:
Carrier "1" ,
function
of
this
Minimal CE
Percentage
Sharing;
If this
parameter
is
NodeB
support
ZTE defined
should
be
guaranteed
for
set
to
"0:
Off"
,
every
PLMN
DPI-SPI
change
or not.
operators
only when
CEin the
cannot
reserve
any CE
Factors
of
consideration:
the
Resource
is
congested.
CE
Share of
Scene
for If
Carrier
capability
NodeB.
NodeB
Suggestion
Sharing,
thefor
CEsetting
will
bethis
used
support
the
ZTE
defined
DPIparameter:
Set
according
to
in the
rules ofthis
First-ArrivedSPI
change,
parameter
is
Operator's; requirement;
First-Get
set 1, otherwise 0.
Suggestion
for setting
thisthe
This parameter
indicates
parameter:
Set
to
The
function
of according
this with this
Node
B associated
Operator's requirement;
parameter:
Minimal percent of
Iub.
CE can be used by the PLMN
for RAN Sharing while carrier
sharing,
which can
not bethe
This parameter
indicates
occupied
by
other
operator
cell list associated with this
(PLMN)
;
Iub.
this parameter: Minimal
percent of CE can be used by
the
for RAN
Sharing
It is PLMN
configured
according
to
while
carrier
sharing,
which
the planning
the requirement from
operator.
Minimal percent of CE can be
used by the PLMN for RAN
Sharing while carrier sharing,
which can not be occupied by
Parameter
is valid
only ;when
other operator
(PLMN)
The
relative
is included
in
larger ofvalue
the value,
the more
TbType
field of
CE resource
that the operator
UTbType/UTbType
can use.The less oftable
the value,
the less
CE resource
when
directly
mappingthat the
operator can layer
use. Qos
transmission
Suggestionfrom
for setting
parameter
upper this
layer
parameter:
percent
service typeMinimal
is required,
this of
CE
can
be
used
by
the
PLMN
parameter should be
for RAN Sharing while carrier
configured
Parameter
Function:
sharing, which
shouldThis
be set
parameter
is the
UTRAN
according to
requirement
Registration
Area Object ID, It
from operator.
is unique under its parent
object.
N/A
Immediately
New CAC
network planning parameter, (Service Setup,
no default value (network
handover or
sharing parameter)
Service
reconfiguration)
New CAC
handover or
sharing parameter)
Service
reconfiguration)
The default value is to ensure At Commit/New
best compatibility
users
N/A
N/A
N/A
N/A
N/A
N/A
New CAC
handover or
sharing parameter)
Service
reconfiguration
N/A
New Session
N/A
New Session
N/A
can not be
modified
The parameter is must be

Network planned.One cell can
N/A
belong to at most four URAs
(MAX_URA=4)
Immediately
No
Basic index
Basic index
Cann't Modify
No
profile identity
profile identity
Cann't Modify
No
Basic index
Function: Measurement
Report Transfer Mode
to consider
themeasurement
successful
Function:
The
ratio
of measurement
report.
Function:
Interval
for
quantity
ofTime
the traffic
volume
The
recommended
Taking
an
Average
measurement that UE
configuration
isRule: It needs
Configuration
performs
Acknowledged
Mode
, it
to
consider
the
user It RLC
Configuration Rule:
needs
can
retransmission.
experiences
and
the
utilization
ratio
of the
radio
experiences
and
resources.
utilization ratio of radio
The
larger the value, then the
resources.
more
smoothly the data
The recommended
Function:
To indicate
whether
amount,
and
itiscan
out
configuration
RLCfilter
buffer
the
report
of
RLC
the
largeritfluctuations,
but if
payload,
can
fastbuffer
respond
payload
for
each
radio
bear is
the
time
is too
long,
the
to the
change
of
data
amount
requested.
response to user data amount
The
recommended
demand
is slow. The smaller
configuration
to report
the value, theisfaster
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
adjustment, and it mayUEradio
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
save the radio resource
of Uu
experiences
of
Uu interface.
interface
. and utilization
ratio
of radio
resources.
Variance
of RLC
Buffer
The
smaller
therecommended
threshold of
Payload
is not
event
4A is , theit faster
to be reported,
can save
This
traffic
response
that system
will
radioparameter
resource
ofis Uu
interface
measurement
quantity,
make
to user'sevents
demand
, and
.
andfaster
there that
is nosystem
need towill
the
adjust. the bandwidth, and
increase
the better the user experience
is, but it also easier to result
This
parameter
is aresources
in a waste
of radio
identification
parameter,
because of unnecessary and
there
is no increase;
need to adjust.
bandwidth
The
larger the threshold of event
4A is , the slower response
that system will make to
user's demand, and the
slower that system will
increase the bandwidth, the
worse the user experience is;
The larger the threshold of
event 4B is, the faster
response that system will
make to user's demand, and
the faster that system will
Basic index
Cann't Modify
No
No
No
No
No
No
No
No
No
The reason of the

Next
measurement
to consider the successful
control
ratio of measurement report.
The reason of the
The reason of the
The reason of the
to consider the condition of
the decision for UE's event
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

ratio of radio resource .
Next
measurement
control
The reason of the

Next
measurement
control
This parameter is traffic

Next
measurement events
measurement
quantity, and there is no need
control
to adjust.
This parameter is a
Next
identification parameter, and measurement
there is no need to adjust.
control
The reason of the
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

in a waste
of radio
resources
make
to user's
demand
, and
because
unnecessary
the fasterofthat
system will
bandwidth
increase;
Theand
increase the
bandwidth,
larger
the
time
to
trigger
for
Function:
Tx
Interruption
After
event
4A
is
,
the
slower
Trigger
Configuration
Tag.
response
system
will
Configuration
Rule:
in a wastethat
of radio
resources
make to user's
demand,
and
Configuration
Rule:
It needs
because
of unnecessary
Function:
the
slowerThe
that
system
will
to
consider
thetime
userofThe
bandwidth
increase;
prohibiting
transmitting
increase
bandwidth,
the
experiences.
larger thethe
pending
time data
for
on
RACH.
worse
the
user
experience
is;
Because
the
capability
of
event 4A is , the slower
Configuration
Rule:
The
smaller
the
time
to
trigger
RACH
channel
is
limited,
if
Configuration
It volume
needs
for
event
4B is,Rule:
the faster
after
triggering
traffic
make
to user's
demand,
and
to
consider
the
user
response
will
measurement
event
report,
the
slowerthat
thatsystem
system
will
experiences.
make
to user's
demand,
and
R99
RACH
is very
increase
theoperation
bandwidth,
the
The
value
of
parameter
is
the
faster
that
system
will
slow
so
if
UE
keeps
sending
larger,
thethe
time
of
prohibiting
decrease
bandwidth,
but
uplink
U-plane
data,
SRBtime
The smaller
the
pending
transmitting
data
on
RACH
itforalso
easier
to
result
in
data
transfer
will
be
delayed
event 4B is, the faster
after
triggering
event report
unnecessary
significantly.
response
thatbandwidth
system
will is
longer,
the
transmission
increase
and
influence
user
Tx
interruption
trigger
is
make
to user's after
demand,
and
timeliness
of
the
uplink
experiences;
The
larger
used
to suspend
U-plane
the faster
that system
willthe
signalling,
for bandwidth,
example
, 4B
time
to
trigger
for event
is,
data
transmission
before
decrease
the
but
measure
report
and
the
slower
response
that
CELL_FACH
to
CELL_DCH
it also easier to result in
reconfiguration
response,
system
will make
to
user's
state
transition
so
that
the is
UE
unnecessary
bandwidth
better,
butand
it may
demand,
and
the influence
slower
can
avoid
U-plane
datauser
tothat
increase
influence
the
user
experience.
system
will
decrease
the
block
uplink
signalling.
But
experiences;
The larger
theit
The
value
of
parameter
is is,
bandwidth,
it
will
make
the
may
influence
user
pending
time for
event 4B
smaller,
the
of
prohibiting
utilization
ratio
radio
experience
iftime
Txofinterruption
the slower
response
that
transmitting
data
on
RACH
resources
low.
after
trigger
is
configured.
system will make to user's
after
triggering
event
report
The
recommended
Basic
index
demand,
and the
slower
thatis
shorter,
the
transmission
configuration
is that Tx
system
willMeasurement
decrease
the
Function:
timeliness
ofitafter
the
uplink
interruption
trigger
is not
bandwidth,
will
make
Report
Transfer
Mode ,the
signalling,
for example
configured.
utilization
ratio
of
radio
Configuration
Rule:
measure
report
and It needs
resources
low.
to
consider
the
successful
Function:
The
measurement
reconfiguration response, is
ratio
of measurement
report.
Function:
Interval
for
quantity
ofTime
the traffic
volume
worse.
The
recommended
Taking
an
Average
measurement
that UE
The recommended
configuration
Configuration
performs
configuration is
isRule:
that ItTxneeds
Acknowledged
Mode
, it
to
consider
the
user
Configuration
Rule:
It RLC
needs
interruption after
trigger
is not
can
retransmission.
experiences
and
the
to
consider the user
configured.
utilization
ratio
of the
radio
experiences
and
resources.
utilization ratio of radio
The
larger the value, then the
resources.
more
smoothly the data
The recommended
Function:
To indicate
whether
amount,
and
itiscan
out
configuration
RLCfilter
buffer
the
report
of
RLC
the
but if
payload,
can
fastbuffer
respond
payload
for
each
radio
bear is
the
time
is too
long,
the
to the
change
of
data
amount
requested.
The
recommended
demand
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
the
report
of
Variance
of RLC
of
Uu
interface .
for
uplink.
Function:
of
Buffer
Payload
each radio
Average
ofAmount
RLCfor
Buffer
Reporting
in
Period
Report
bear
is requested.
Payload
is not recommended
Criteria.
Configuration
It needs
to be reportedRule:
for UE,
it can
Configuration
needs
to
consider
theRule:
radioItresource
save
the radio
resource
of Uu
to
consider
of
Uu interface.
interface
. radio resource of
Uu
interface
and Buffer
the user
Variance
of RLC
experience.
Payload is not recommended
The
of this
parameter
to bevalue
reported,
it can
save is
larger,
the
periodic
reports
will
radio resource of Uu interface
be
. more, and it will occupy
more radio resource of Uu
interface.
smaller, the periodic reports
will be less, and the response
to UE's traffic volume demand
is also slower, and it will
influence the user
The reason of the

The reason of the
The reason that the
the parameter is to try best to
provide better user
experience.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

user experience.
Next
measurement
control
Basic index
Cann't Modify
The reason of the

Next
measurement
control
The reason of the
The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

to consider radio resource of
Uu interface and the user
experience.
smaller, the periodic reports
will be more frequent, and it
will occupy more radio
resource of Uu interface.
larger, the periodic reports will
be more sparely, and the
response
to UE's traffic
Basic index
volume demand is also
Function:
Measurement
slower, and
it will influence
Report
Transfer
Mode
Function:
Measurement
Configuration
Rule:
needs
quantity of the RNC Ituser
to consider
successful
plane
trafficthe
volume
ratio
of measurement
Function:
Time Intervalreport.
for
measurement
The
recommended
Taking
an
Average
Configuration
Rule: It needs
configuration
isRule:
Configuration
to consider the
user It needs
Acknowledged
Mode
to
consider
the
experiences anduser
the RLC , it
can
retransmission.
experiences
and
utilization ratio of the
radio
utilization
resources.ratio of radio
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
buffer payload, it can make
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of RLC
buffer
the
larger fluctuations,
but if
measurement
more
correctly,
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
.ratio oftoradio
resources. , and
and
there
is
no
need
towill
the
faster
that
The smaller thesystem
time to
trigger
adjust.
increase
the
bandwidth,
and
for event 4A is , the faster
the
better
the
user
experience
is, but to
it also
easier
to result
make
user's
demand
, and
This
parameter
is aresources
in
a faster
waste
of radio
the
that
system
will
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
there
is
no
need
to adjust.
bandwidth
increase;
The
the better the
user experience
larger
threshold
of result
event
is, but the
it also
easier to
4A
is
,
the
slower
response
in a waste of radio resources
that
system
will make to
because
of unnecessary
user's
demand,
and the
bandwidth increase;
The
slower
that
system
will for
larger the time to trigger
increase
bandwidth,
event 4A the
is , the
slower the
worse
the
user
experience
response that system will is;
The larger
the threshold
make
to user's
demand, of
and
event
4B is,that
thesystem
faster will
the slower
response
thatbandwidth,
system willthe
increase the
make
to
user's
and
worse the user demand,
experience
is;
the
faster
that
system
will
The smaller the time to trigger
decrease
theis,
bandwidth,
for event 4B
the faster but
it also easier
result in
response
thattosystem
will
unnecessary
bandwidth
make to user's
demand, and
increase
user
the fasterand
thatinfluence
system will
experiences;
The
smaller
the
decrease the bandwidth, but
The reason of the

Next
measurement
control
Basic index
Cann't Modify
The reason of the

Next
measurement
control
The reason of the
The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
Next
measurement
control
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

because of unnecessary
bandwidth increase; The
larger the pending time for
the slower that system will
The smaller the pending time
for event 4B is, the faster
response
that system will
Basic index
Function:
the faster Measurement
that system will
Report
Transfer
Mode but
decrease
the bandwidth,
Configuration
Rule:
It needs
it also easier to result
in
to
consider
the
successful
Function:
The
measurement
unnecessary bandwidth
ratio
of measurement
report.
Function:
Time
Interval
for
quantity
of
theinfluence
traffic
volume
increase
and
user
The
recommended
Taking
an
Average
measurement
thatlarger
UE the
experiences; The
configuration
isRule:
Configuration
It needs
performs
pending time for
event
4B is,
Acknowledged
Mode
RLC
, it
to
consider
the
user
Configuration
Rule: Itthat
needs
the slower response
can
retransmission.
experiences
and
the
to
consider
the user
system
will make
to user's
utilization
ratio
of the
radio
experiences
and
demand, and
the
slower that
resources.
utilization
of radio
system willratio
decrease
the
The
larger the
value,
then
resources.
bandwidth,
it will
make
thethe
more
smoothly
the
data
The
recommended
utilization
ratio of radio
Function:
To indicate
whether
amount,
itiscan
out
configuration
RLCfilter
buffer
resourcesand
low.
the
report
of
RLC
the
but if
payload,
can
fastbuffer
respond
payload
for
each
radio
bear is
the
time
is too
long,
the
to the
change
of
data
amount
requested.
The
recommended
demand
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
DCH
ofrequested.
8iskbps.
bear
is
Payload
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
and Volume
utilization
of
Uu interface.
interface
.Traffic
Function:
ratio
of radio
resources.
Variance
ofofRLC
Buffer
Threshold
Event
4A/4B for
The
smaller
the
threshold
of
Payload
is
not
recommended
DCH of 16 kbps.
event
4A is , the
to be reported,
it faster
canIt save
Configuration
Rule:
needs
This
parameter
is Uu
traffic
response
that
will
radio
resource
of
interface
to
consider
thesystem
user
measurement
events
quantity,
make
to user's
demand
, and
.experiences
and utilization
and
there
is
no
need
to
the
faster
that
system
will
ratio of radio resources.
adjust.
increase
the the
bandwidth,
The smaller
thresholdand
of
the
better
the
user
experience
event 4A is , the faster
is, but it also
to will
result
response
thateasier
system
This
parameter
is aresources
in
a waste
of radio
make
to
user's
demand
and
identification
parameter,,and
because
ofthat
unnecessary
the
faster
system
will
there
is no increase;
need to adjust.
bandwidth
Theand
increase the
bandwidth,
larger
the
threshold
of
event
4A
is
,
the
slower
response
that
systemofwill
make
to
in a waste
radio
resources
user's
demand,
and
the
slower
thatincrease;
system will
bandwidth
The
increase
the
bandwidth,
the
larger the threshold
of event
worse
the
user
experience
4A is , the slower response is;
The system
larger the
that
willthreshold
make to of
event
is, the and
faster
user's 4B
demand,
the
response
that
system
slower that system willwill
make
to user's
demand, the
and
increase
the bandwidth,
the
faster
that
system
will
decrease
but
The largerthe
thebandwidth,
threshold of
it also 4B
easier
to result
event
is, the
faster in
unnecessary
response thatbandwidth
system will
increase
and influence
make to user's
demand,user
and
experiences;
The
smaller
the faster that system
will the
The reason of the

Next
measurement
control
Basic index
Cann't Modify
The reason of the

Next
measurement
control
The reason of the
The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
Next
measurement
control
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No
event 4A is , the
faster
Configuration
Rule:
It needs
is, but it also
easier
to
result
response
that
system
will
to
consider
the
user
in
a waste
of radio
resources
make
to
user's
demand
, and
experiences
and Volume
utilization
Function:
Traffic
because
of
unnecessary
the
faster
that
system
will
ratio
of radio
resources.
Threshold
of
Event 4A/4B
for
bandwidth
increase;
Theand
increase
the
bandwidth,
The
smaller
the
threshold
of
DCH
of
256
kbps.
larger
the
threshold
of
event
the
betteristhe
user
experience
event
, the
faster
Configuration
Rule:
It needs
4A
is ,4A
slower
response
is, but
itthe
also
easier
to
result
response
that
system
will
to
consider
the
user
that
systemofwill
make
to
in
a waste
radio
resources
make
to
user's
demand
experiences
andand
utilization
user's
demand,
the , and
Function:
Traffic
Volume
because
of
unnecessary
the
faster
that
system
will
ratio
of that
radio
resources.
slower
system
Threshold
of
Event will
4A/4B
for
bandwidth
increase;
Theand
increase
the
bandwidth,
The
smaller
the
threshold
of
increase
the
bandwidth,
the
DCH
of
384
kbps.
larger
the
threshold
of
event
the
better
user
experience
event
isthe
, the
faster
worse
the
user
experience
is;
Configuration
Rule:
It needs
4A
is ,4A
the
slower
response
is,
but
it
also
easier
to
result
response
that
system
will
The
larger
the
threshold
of
to
consider
the
user
that
systemofwill
make
to
in
a waste
radio
resources
make
to
user's
demand
, and
event
4B
is, the
faster
experiences
and
utilization
user's
demand,
and
the
Function:
The
time
to
trigger
because
of
unnecessary
the
faster
response
that
system
will
ratio
radio
resources.
slower
that
system
will
for
4Aofand
4B.
bandwidth
increase;
Theand
increase
the
bandwidth,
make
to user's
demand,
and
The
smaller
the
threshold
of
increase
the
bandwidth,
the
Configuration
Rule:
It
needs
larger
the
threshold
of
event
better
the
user
experience
the
faster
that
system
will
event
4A
is
,
the
faster
worse
the
user
experience
is;
to
consider
the
user
4A
is , itthe
slower
response
is,
but
also
easier
to will
result
decrease
the
bandwidth,
but
response
that
system
The
larger
the
threshold
of
experiences
and
utilization
that
system
will
make
to
in
a waste
radio
resources
itevent
also
easier
to
result
in
make
to
user's
demand
, and
is,ofthe
faster
ratio
of4B
radio
resources.
user's
demand,
and
thetime
Function:
The
pending
because
of
unnecessary
unnecessary
bandwidth
the
faster
response
that
system
will
The
smaller
the time
to trigger
slower
that
system
will
for
4A
and
4B.
bandwidth
increase;
The
increase
and
influence
user
increase
the
bandwidth,
and
make
to user's
demand,
and
for
event
4A
is
,
the
faster
increase
the
bandwidth,
the
Configuration
Rule:
It
needs
larger
the
threshold
of
event
experiences;
The
smaller
the
better
the
user
experience
the
faster
that
system
will
response
that
system
will is;
worse
the
user
experience
to
consider
the
user
4A
is
,
the
slower
response
threshold
of
event
4B
is,
the
is,
but
it also
easier
to result
decrease
the
bandwidth,
but
make
to
user's
demand
and
The
larger
the
threshold
experiences
and
utilization
that
system
will
make
to ,of
slower
response
that
system
in
a faster
waste
of
radio
resources
itevent
also
easier
to
result
in
the
that
system
will
is,
the
faster
ratio
of4B
radio
resources.
user's
demand,
and
the
will make
tounnecessary
user's
demand,
because
of
unnecessary
bandwidth
increase
the
bandwidth,
response
that
system
willand
The
smaller
the
pending
time
slower
that
system
will
and
the
slower
that
system
bandwidth
increase;
The
increase
and
influence
user
the
better
the
user
experience
make
to
user's
demand,
and it
for
event
4A
is
,
the
faster
increase
the
bandwidth,
the
will
decrease
the
bandwidth,
larger
the
threshold
of will
event
experiences;
The
smaller
the
is,
but
it also
easier
to
result
the
faster
that
system
response
that
system
will
worse
the
user
experience
is;
will
make
the
utilization
ratio
4A
is
,
the
slower
response
threshold
of
event
4B
is,
the
in
a waste
of
radio
resources
decrease
the
bandwidth,
but
make
to
user's
demand
,
and
The
larger
the
threshold
of
of
radio
resources
low.
that
system
will
make
to
slower
response
that system
because
of
unnecessary
it also
easier
tosystem
result
in
the
faster
that
will
event
4B
is,
the
faster
user's
demand,
and
the
will make
toincrease;
user's
demand,
bandwidth
The
unnecessary
bandwidth
increase
the
bandwidth,
and
response
that
system
will
slower
that
system
will
and
the
slower
that
system
larger
the
time
to
trigger
for
increase
and
influence
user
the
better
the
user
experience
make
to
user's
demand,
and it
increase
the
bandwidth,
the
will
decrease
theslower
bandwidth,
event
4A
is
,
the
experiences;
The
smaller
the
is,
but
it
also
easier
to
result
the
faster
that
system
will
worse
the the
user
experience
is;
will
make
utilization
ratio
response
that
system
will
threshold
of
event
4B
is,
the
in
a waste
of
radio
resources
decrease
the
bandwidth,
but
The
larger
the
threshold
of
of
radio
resources
low.
make
to
user's
slower
response
that system
because
of unnecessary
it also 4B
easier
to demand,
result
in and
event
the
faster
the
sloweris,
system
will
will make
tothat
user's
demand,
bandwidth
increase;
The
unnecessary
bandwidth
response
thatbandwidth,
system
willthe
increase
the
and
the
slower
that
system
larger
theuser's
pending
time user
for
increase
and
influence
make
to
demand,
and
worse
theisuser
experience
is;it
will
decrease
the
bandwidth,
event
4A
,
the
slower
experiences;
The
smaller
the
the
faster
that
system
will
The
smaller
the
time
to
trigger
will
make
the
utilization
ratio
response
that
system
willthe
threshold
of
4B is,
decrease
theevent
bandwidth,
but
for
event
4B
is,
the
faster
of
radio
resources
low.
make
to
user's
demand,
and
slower
response
that
system
it also easier
tosystem
result in
response
that
will
the
slowertothat
system
will
will make
user's
demand,
unnecessary
bandwidth
make
to slower
user's
demand,
and
increase
the
bandwidth,
the
and
the
that
system
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;it
will
decrease
the
bandwidth,
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
will
make
the
utilization
ratio
threshold
of event
4B in
is, the
itof
also
easier
to the
result
for
event
4B is,
faster
radio
resources
low.
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
Function:
Measurement
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Ituser
needs
the
slower
that
quantity
of response
thetoRule:
RNC
itofalso
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
plane
traffic
volume
ratio
of measurement
report.
demand,
and
the
slower
that
Function:
Time
Interval
for
measurement
increase
and
influence
user
The
recommended
system
will
decrease
the
Taking
an
Average
Configuration
Rule:
It needs
experiences; The
larger
the
configuration
isRule:
bandwidth,
itthe
will
make
the is,
Configuration
It needs
to
consider
user
pending
time
for
event
4B
Acknowledged
Mode
RLC
utilization
ratio
of
radio
to
consider
the
user
experiences
and the that , it
the slower response
can
retransmission.
resources
low.
experiences
and
utilization
of the
radio
system willratio
make
to user's
utilization
ratio
of radio
resources.
demand, and the
slower that
resources.
The
recommended
system
will decrease the
The
larger the
then
the
configuration
isvalue,
Average
RLC
bandwidth,
it will
make
the
more
smoothly
the
data
buffer
payload,
it can
utilization
ratio of
radiomake
Function:
To
indicate
whether
amount,
it can filter
out
the
trafficand
volume
resources
low.
the
report
of RLC
buffer
the
but if
measurement
more
correctly,
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
the
RNC's
decision
of
event
demand, but it is also easier
4B0
for UE's
traffic volume
to result
in unnecessary
measurement.
adjustment, andWhen
it mayUE
reports
event
4B, and the
influence
the utilization
ratio
RLC
buffer
payload is 0, then
of radio
resources.
it 's considered as event 4B0
for uplink.
The reason of the

The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
The reason of the
The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No
Function: To indicate whether

the report of average of RLC
buffer payload for each radio
bear is requested.
Function:
Tothe
indicate
whether
to consider
radio resource
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of Uu interface .
Threshold
of
Event
4A/4B
for
Buffer
Payload
for
each
Average of RLC Buffer radio
DCH
ofrequested.
8iskbps.
bear
is
Payload
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
and Volume
utilization
of
Uu interface.
interface
.Traffic
Function:
ratio
of radio
resources.
Variance
ofofRLC
Buffer
Threshold
Event
4A/4B for
The
smaller
the
threshold
of
Payload
is
not
recommended
DCH of 16 kbps.
event
4A is , the
to be reported,
it faster
canIt save
Configuration
Rule:
needs
This
parameter
is Uu
traffic
response
that
will
radio
resource
of
interface
to
consider
thesystem
user
measurement
events
quantity,
make
to
user's
demand
, and
.
experiences
and Volume
utilization
Function:
Traffic
and
there
is
no
need
to
the
faster
that
system
will
ratio
of radio
resources.
Threshold
of bandwidth,
Event 4A/4B
for
adjust.
increase
the
The
smaller
the
thresholdand
of
DCH
of
32
kbps.
the
better
user
experience
event
4A isthe
, the
faster
Configuration
Rule:
It needs
is, but it also
easier
to
result
response
that
system
will
to
consider
the
user
This
parameter
is aresources
in
a waste
of radio
make
to
user's
demand
,and
and
experiences
and
utilization
identification
parameter,
Function:
Traffic
Volume
because
of
unnecessary
the
faster
that
system
will
ratio
ofis radio
resources.
there
no of
need
to adjust.
Threshold
Event
4A/4B
for
bandwidth
increase;
Theand
increase
the
bandwidth,
The
smaller
the
threshold
of
DCH
of
64
kbps.
larger
the
threshold
of
event
the
betteristhe
user
experience
event
, the
faster
Configuration
Rule:
It needs
4A
is ,4A
slower
response
is, but
itthe
also
easier
to
result
response
that
system
will
to
consider
the
user
that
systemofwill
make
to
in
a waste
radio
resources
make
to
user's
demand
experiences
andand
utilization
user's
demand,
the , and
Function:
Traffic
Volume
because
of
unnecessary
the
faster
that
system
will
ratio
of that
radio
resources.
slower
system
Threshold
of
Event will
4A/4B
for
bandwidth
increase;
Theand
increase
the
bandwidth,
The
smaller
the
threshold
of
increase
the
bandwidth,
the
DCH
of
128
kbps.
larger
the
threshold
of
event
the
better
user
experience
event
isthe
, the
faster
worse
the
user
experience
is;
Configuration
Rule:
It needs
4A
is ,4A
the
slower
response
is,
but
it
also
easier
to
result
response
that
system
will
The
larger
the
threshold
of
to
consider
the
user
that
systemofwill
make
to
in
a waste
radio
resources
make
to
user's
demand
event
4B
is, the
faster
experiences
and
utilization
user's
demand,
and
the , and
Function:
Traffic
Volume
because
of
unnecessary
the
faster
response
that
system will
ratio
of that
radio
resources.
slower
system
Threshold
of
Event will
4A/4B
for
bandwidth
increase;
Theand
increase
the
bandwidth,
make
to
user's
demand,
and
The
smaller
the
threshold
of
increase
the
bandwidth,
the
DCH
of
256
kbps.
larger
the
threshold
of
event
the
better
the
user
experience
faster
system
will is;
event
isthat
, the
faster
worse
the
user
experience
Configuration
Rule:
It needs
4A
is ,4A
the
slower
response
is,
but
it
also
easier
to
result
decrease
the
bandwidth,
but
response
that
system
will
The
larger the
threshold
to
user
that
system
will
make
to of
in
aconsider
waste
ofthe
radio
resources
it also
easier
to
result
in
make
to
user's
demand
,
event
4B
is,
the
faster
experiences
andand
utilization
user's
demand,
the and
Function:
Traffic
Volume
because
of
unnecessary
unnecessary
bandwidth
the
faster
response
that
system
will
ratio
of that
radio
resources.
slower
system
will
Threshold
of
Event
4A/4B
for
bandwidth
increase;
The
increase
and
influence
user
increase
the
bandwidth,
and
make
to
user's
demand,
and
The
smaller
the
threshold
of
increase
the
bandwidth,
the
DCHbetter
ofthe
384
kbps.
larger
threshold
of
event
experiences;
The
smaller
the
the
user
experience
the
faster
system
will is;
event
isthat
, the
faster
worse
the
user
experience
Configuration
Rule:
It needs
4A
is ,4A
the
slower
response
threshold
of
event
4B
is,
the
is,
but
it
also
easier
to
result
decrease
the
bandwidth,
but
response
that
system
will
The
larger
the
threshold
of
to
consider
the
user
that
system
will
make
to
slower
response
that
system
in
a
waste
of
radio
resources
it also 4B
easier
to demand
result
in , and
make
to
user's
event
is,
the
faster
experiences
and
utilization
user's
demand,
and
will make
to
user's
demand,
Function:
The
time
tothe
trigger
because
of
unnecessary
unnecessary
bandwidth
the
faster
response
that
system
will
ratio
of
radio
resources.
slower
that
system
will
and
the
slower
that
system
for
4A
and
4B.
bandwidth
increase;
The
increase
and
influence
user
increase
the
bandwidth,
and
make
to
user's
demand,
and
The
smaller
the
threshold
of
increase
the
bandwidth,
the
will
decrease
the
bandwidth,
Configuration
Rule:
It
needs
larger
the
threshold
of
event
experiences;
The
smaller
theit
the
better
the
user
experience
faster
that
system
will
event
4A
is
,
the
faster
worse
the
user
experience
is;
will
make
the
utilization
ratio
to
consider
the
user
4A
is , itthe
slower
response
threshold
of
event
4B
the
is,
but
also
easier
to is,
result
decrease
the
bandwidth,
but
response
that
system
will
The
larger
the
threshold
of
of
radio
resources
low.
experiences
and
utilization
that
system
make
to
slower
response
that
system
in
a waste
ofwill
radio
resources
it also
easier
to
result
in
make
to
user's
demand
event
is,
the
faster
ratio
of4B
radio
resources.
user's
demand,
and
the , and
will make
tounnecessary
user's
demand,
because
of
unnecessary
bandwidth
the
faster
response
that
system
The
smaller
the
time
towill
trigger
slower
that
system
will
and
the
slower
that
system
bandwidth
increase;
The
increase
and
influence
user
increase
the
bandwidth,
and
make
to
user's
demand,
and it
for
event
4A
is
,
the
faster
increase
the
bandwidth,
the
will
decrease
the
bandwidth,
larger
the that
threshold
of will
event
experiences;
The
smaller
the
the
better
the
user
experience
faster
system
response
that
system
will
worse
the
user
experience
is;
will
make
the
utilization
ratio
4A
is
,
the
slower
response
threshold
of
event
4B
is,
the
is,
but
it also
easier
to result
decrease
the
bandwidth,
but
make
to
user's
demand
,
and
The
larger
the
threshold
of
of
radio
resources
low.
that
system
make
to
slower
response
that
system
in
a faster
waste
ofwill
radio
resources
it also
easier
to
result
in
the
that
system
will
event
4B
is,
the
faster
user's
demand,
and
the
will make
tounnecessary
user's
demand,
because
of
unnecessary
bandwidth
increase
the
bandwidth,
and
response
that
system
will
slower
system
and
thethat
slower
that will
system
bandwidth
increase;
The
increase
and
influence
user
the
better
the
user
experience
make
to
user's
demand,
and it
increase
the
bandwidth,
the
will
decrease
the bandwidth,
larger
the
threshold
of will
event
experiences;
The
smaller
the
is,
but
it
also
easier
to
result
the
faster
that
system
worse
the
user
experience
is;
will
make
the
utilization
ratio
4A
is
,
the
slower
response
threshold
of
event
4B
is,
the
in
a waste
of
radio
resources
decrease
the
bandwidth,
but
The
larger
the
threshold
of
of
radio
resources
low.
that
system
will
make
to
slower
response
that system
because
of
unnecessary
it also 4B
easier
to result
in
event
is,
the
faster
user's
demand,
and
the
will make
toincrease;
user's
demand,
bandwidth
The
unnecessary
bandwidth
response
that
system
will
slower
that
system
will
and
the
slower
that
system
larger
the
time
to
trigger
for
increase
and
influence
user
make
to
user's
demand,
and it
increase
the
bandwidth,
the
will
decrease
theslower
bandwidth,
event
4A
is
,
the
experiences;
The
smaller
the
the
faster
that
system
will
worse
the the
user
experience
is;
will
make
utilization
ratio
response
that
system
will
threshold
of
event
4B
is,
the
decrease
the
bandwidth,
but
The
larger
the
threshold
of
of
radio
resources
low.
make
to
user's
demand,
and
slower
response
that system
it also 4B
easier
to result
in
event
the
faster
the
sloweris,
system
will
will make
tothat
user's
demand,
unnecessary
bandwidth
response
that
system
willthe
increase
the
bandwidth,
and
the
slower
that
system
increase
and influence
user
make
to
demand,
and
worse
theuser's
user
experience
is;it
will
decrease
the
bandwidth,
experiences;
The
smaller
the
the
faster
that
system
will
The
smaller
the
time
to
trigger
will
make
the
utilization
ratio
threshold
of
4B is, the
decrease
theevent
bandwidth,
for
event
4B
is,
the
faster but
of
radio
resources
low.
slower
response
that
it also easier
tosystem
result system
in
response
that
will
will make to user's
demand,
unnecessary
bandwidth
make
to
user's
demand,
and
and
the slower
that system
increase
and
influence
user
the
faster
that
system
will
will
decrease the bandwidth,
experiences;
smallerbut
theit
decrease the The
bandwidth,
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
The reason of the
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

bandwidth increase; The
larger the pending time for
the slower that system will
The smaller the pending time
for event 4B is, the faster
response
that system will
Basic index
Function:
the faster Measurement
that system will
Report
Transfer
Mode but
decrease
the bandwidth,
Configuration
Rule:
It needs
it also easier to result
in
to
consider
the
successful
Function:
The
measurement
ratio
of measurement
report.
Function:
Time
Interval
for
quantity
of
theinfluence
traffic
volume
increase
and
user
The
recommended
Taking
an
Average
measurement
thatlarger
UE the
experiences; The
configuration
isRule:
Configuration
It needs
performs
pending time for
event
4B is,
Acknowledged
Mode
RLC
, it
to
consider
the
user
Configuration
Rule: Itthat
needs
the slower response
can
retransmission.
experiences
and
the
to
consider
the user
system
will make
to user's
utilization
ratio
of the
radio
experiences
and
demand, and
the
slower that
resources.
utilization
of radio
system willratio
decrease
the
The
larger the
value,
then
resources.
bandwidth,
it will
make
thethe
more
smoothly
the
data
The
recommended
utilization
ratio of radio
Function:
To indicate
whether
amount,
itiscan
out
configuration
RLCfilter
buffer
resourcesand
low.
the
report
of
RLC
the
but if
payload,
can
fastbuffer
respond
payload
for
each
radio
bear is
the
time
is too
long,
the
to the
change
of
data
amount
requested.
The
recommended
demand
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
the
report
of
Variance
of RLC
of
Uu
interface .
for
uplink.
Function:
of
Buffer
Payload
each radio
Average
ofAmount
RLCfor
Buffer
Reporting
in
Period
Report
bear
is requested.
Payload
is not recommended
Criteria.
Configuration
It needs
to be reportedRule:
for UE,
it can
Configuration
needs
to
consider
theRule:
radioItresource
save
the radio
resource
of Uu
to
consider
of
Uu interface.
interface
. radio resource of
Uu
interface
and Buffer
the user
Variance
of RLC
Function:
Interval in
experience.
Payload isReporting
not recommended
Period
Report
Criteria.
The
value
of
this
parameter
to be reported, it can save is
Configuration
Rule:
Itinterface
needs
larger,
the periodic
reports
will
radio resource
of Uu
to
radio
resource
be
more, and
it will
occupy of
. consider
Uu
interface
and the of
user
more
radio resource
Uu
experience.
interface.
The
The value
value of
of this
this parameter
parameter is
is
smaller,
smaller, the
the periodic
periodic reports
reports
will
frequent,
and it
will be
be more
less, and
the response
will
occupy
more
radiodemand
to UE's
traffic
volume
resource
of Uuand
interface.
is also slower,
it will
The
value
of
this
influence the userparameter is
larger,
the periodic reports will
experience.
be more sparely, and the
response
to UE's traffic
Basic index
volume demand is also
Function:
Measurement
slower, and
it will influence
Report
Transfer
Mode
The recommended
configuration is
Acknowledged Mode RLC , it
can retransmission.
The reason of the

Next
measurement
control
Basic index
Cann't Modify
The reason of the

Next
measurement
control
The reason of the
The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No
quantity of the RNC user

plane traffic volume
Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
to consider theRule:
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
measurement more correctly,
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
will
the
slower
that
system
will
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
threshold
of event
4B in
is, the
itforalso
easier
to the
result
event
4B is,
faster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Itthat
needs
the
slower response
itofalso
toRule:
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
ratio
of measurement
report.
demand,
and influence
the slower
that
increase
and
user
The
recommended
system
will
decrease
the
experiences; The larger the
configuration
is event
bandwidth,
it will
make 4B
the is,
pending time
for
Acknowledged
Mode
RLC
utilization
ratio
of
radio
the slower response that , it
can
retransmission.
resources
system
willlow.
make to user's
demand, and the slower that
system will decrease the
bandwidth, it will make the
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
will
the
slower
that
system
will
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
threshold
of event
4B in
is, the
itforalso
easier
to the
result
event
4B is,
faster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Itthat
needs
the
slower response
itofalso
toRule:
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
ratio
of measurement
report.
demand,
and influence
the slower
that
increase
and
user
The
recommended
system
will
decrease
the
configuration
is event
bandwidth,
it will
make 4B
the is,
pending time
for
Acknowledged
Mode
RLC
utilization
ratio
of
radio
can
retransmission.
resources
system
willlow.
make to user's
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
will
the
slower
that
system
will
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
threshold
of event
4B in
is, the
itforalso
easier
to the
result
event
4B is,
faster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Itthat
needs
the
slower response
itofalso
toRule:
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
ratio
of measurement
report.
demand,
and influence
the slower
that
increase
and
user
The
recommended
system
will
decrease
the
configuration
is event
bandwidth,
it will
make 4B
the is,
pending time
for
Acknowledged
Mode
RLC
utilization
ratio
of
radio
can
retransmission.
resources
system
willlow.
make to user's
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Throughput
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
E-DCH.
bear
is requested.
Payload
is not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
will
the
slower
that
system
will
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
threshold
of event
4B in
is, the
itforalso
easier
to the
result
event
4B is,
faster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Itthat
needs
the
slower response
itofalso
toRule:
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
ratio
of measurement
report.
demand,
and influence
the slower
that
increase
and
user
The
recommended
system
will
decrease
the
configuration
is event
bandwidth,
it will
make 4B
the is,
pending time
for
Acknowledged
Mode
RLC
utilization
ratio
of
radio
can
retransmission.
resources
system
willlow.
make to user's
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
will
the
slower
that
system
will
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
experiences;
The
smallerbut
the
decrease
thethe
bandwidth,
The
smaller
pending
time
threshold
of event
4B in
is, the
itforalso
easier
to the
result
event
4B is,
faster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
and
the slower
that
system
Function:
Measurement
experiences;
The
larger
the
the
faster
that
system
will
will
decrease
the
bandwidth,
Report
time
to Transfer
trigger
forMode
event 4B
is,it
decrease
the utilization
bandwidth,
but
will
make
the
ratio
Configuration
Itthat
needs
the
slower response
itofalso
toRule:
result
in
radioeasier
resources
low.
to
consider
the
successful
system
will
make
to
user's
ratio
of measurement
report.
demand,
and influence
the slower
that
increase
and
user
The
recommended
system
will
decrease
the
configuration
is event
bandwidth,
it will
make 4B
the is,
pending time
for
Acknowledged
Mode
RLC
utilization
ratio
of
radio
can
retransmission.
resources
system
willlow.
make to user's
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Basic index
Next
measurement
control
Next
measurement
control
Next
measurement
control
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

Function:
Time Interval for
measurement
Taking
an Average
Configuration
Rule: It needs
Configuration
user It needs
to
consider
the
experiences anduser
the
experiences
and
utilization ratio
of the
radio
utilization
resources.
The recommended
The
larger theisvalue,
thenRLC
the
configuration
Average
more
smoothly
the
data
Function:
To
indicate
whether
amount,
it can filter
out
the trafficand
volume
the
report
of
RLC
buffer
the
larger
fluctuations,
but
if
payload
each
radio
the
isthe
too
long,
thebear
andtime
thenfor
utilization
of is
requested.
response
to usermore
data amount
radio resources
The
recommended
demand
rationally.
configuration
to report
the RLC
buffer
payload,
it is
used
for
response
to user
data
amount
Function:
To
indicate
the
RNC'sbut
decision
ofwhether
event
demand,
it is also
easier
the
report
average
of RLC
4B0
for UE's
traffic volume
to result
inof
unnecessary
buffer
payload
for
each
measurement.
When
bear
is requested.
reports
event
4B, and the
influence
the utilization
ratio
Configuration
Rule: It
RLC
buffer
payload
is needs
0, then
of
radio
resources.
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
Function:
Traffic
Volume
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Threshold
Event
4A/4B
for
Buffer
Payload
for
each
radio
Average
ofofRLC
Buffer
Non-DCH
bear
is requested.
Payload
isChannel.
not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
the
user
radio resource
of Uu
experiences
utilization
of
Uu interface.
interface
.Theand
Function:
time
to trigger
ratio
radio
resources.
Variance
of4B.
RLC
Buffer
for 4Aofand
The
smaller
the
threshold
of
Payload
is
not
recommended
event
4A is ,the
theituser
faster
to consider
be reported,
can save
to
This
traffic
response
thatand
system
will
radioparameter
resource
ofisutilization
Uu
interface
experiences
measurement
events
quantity,
make
user's
demand
, and
.ratio oftoradio
resources.
Function:
The
pending
time
and
there
is
no
need
to
the
faster
that
system
will
The
smaller
the time to trigger
for
4A
and
4B.
adjust.
increase
the
bandwidth,
and
for
event
4A
is
, the It
faster
Configuration
Rule:
needs
the
better
the
user
experience
response
that
system
to
the
user to will
is, consider
but to
it also
easier
result
make
user's
demand
, and
experiences
and
This
parameter
isutilization
aresources
in
a faster
waste
of radio
the
that
system
will
ratio
of radio
resources.
identification
parameter, and
because
of unnecessary
increase
the
bandwidth,
and
The
smaller
the
pending
there
is
no
need
to adjust.
bandwidth
increase;
The time
the
better
the
user
experience
for
event 4A
is , the faster
larger
threshold
of result
event
is,
but the
it also
easier
to
response
that
system
will
4A
is
,
the
slower
response
in a waste
of radio
resources
make
to user's
that system
willdemand
make to , and
because
ofthat
unnecessary
the
faster
system
will
user's
demand,
and the
bandwidth
increase;
Theand
increase
the
bandwidth,
slower
thattime
system
will for
larger
the
to trigger
the
better
thebandwidth,
user
experience
increase
the
the
event
is , the
slower
is,
but 4A
it also
easier
to resultis;
worse
the
user
experience
response
system
will
in
a wastethat
of
resources
The
theradio
threshold
makelarger
to user's
demand, of
and
because
of
unnecessary
event
4B is,that
thesystem
faster will
the
slower
bandwidth
increase;
The
response
thatbandwidth,
system willthe
increase
the
larger
theuser's
pending
time for
make
to
demand,
and
worse
theisuser
experience
is;
event
4A
,
the
slower
the
faster
that
system
will
The
smaller
the
time
to
trigger
response
that
system willbut
decrease
theis,
bandwidth,
for
event
4B
the fasterand
make
to
user's
demand,
it also easier
tosystem
result in
response
that
the
slower
that
system
will
Function: Time
Intervalwill
for
unnecessary
bandwidth
make
to
user's
demand,
and
increase
the
bandwidth,
the
Taking
an
Average
increase
and
influence
user
the
faster
that
system
will
worse
the user
experience
is;
Configuration
Rule:
It needs
experiences;
The
smaller
the
decrease
the
bandwidth,
but
The
smaller
the
pending
time
to
consider
the
user
threshold
of event
4B in
is, the
itexperiences
also
easier
to the
result
for
event
4B and
is,
thefaster
slower
response
that
system
unnecessary
bandwidth
response
that
system
will
utilization
ratio
of radio
Basic
index
will make
to
user's
demand,
increase
and
influence
user
make
to
user's
demand,
and
resources.
and
the slower
that
system
experiences;
The
larger
thethe
the
faster
that
system
will
The
larger
the
value,
then
will
decrease
the
bandwidth,
time
tosmoothly
trigger
for
4B
is,it
decrease
the utilization
bandwidth,
but
more
theevent
dataratio
will
make
the
the
slower
response
that
itofalso
result
in out
amount,
and
ittocan
filter
radioeasier
resources
low.
system
will
make
to
user's
unnecessary
bandwidthbut if
the
demand,
and
the
slower
that
increase
and
the time is
tooinfluence
long,
theuser
system
will
decrease
the
experiences;
The
larger
the
bandwidth,
it will
make
the is,
pending time
for The
event
4B
demand
is slow.
smaller
utilization
ratio
of
radio
slower the
response
that
the value,
faster the
resources
low.
system willto
make
to user's
response
user data
amount
anditthe
slower
that
demand, but
is also
easier
system
decrease the
to resultwill
in unnecessary
bandwidth,
will itmake
adjustment,itand
may the
The reason of the

The reason of the
The reason of the
4B0.
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
Next
measurement
control
Next
measurement
control
Next
measurement
control
Basic index
Cann't Modify
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

experiences and utilization
ratio
of radio
Function:
Theresources.
time to trigger
The
smaller
the pending time
for 4A and 4B.
for
event 4A isRule:
, the It
faster
Configuration
needs
response
that
to
consider
thesystem
user will
This
parameter
isutilization
traffic , and
make
to user's
demand
experiences
and
measurement
events
quantity,
the
faster
that
system
will
ratio
of radio
resources.
Function:
Throughput
and
there
is
no
need
to
increase
the
bandwidth,
and
The
smaller
time4A/4B
to trigger
Threshold
ofthe
Event
for
adjust.
the
better
the
user
experience
for
event 4A is , the faster
E-DCH.
is,
but it also
to will
result
response
thateasier
system
Configuration
Rule:
It needs
in a waste
of radio
resources
make
to
user's
demand
, and
to
consider
the
user
This
parameter
is a
because
ofthat
unnecessary
the
faster
system
will
experiences
and
utilization
identification
parameter,
and
bandwidth
increase;
Theand
increase
the
bandwidth,
ratio
of
radio
resources.
there
is
no
need
to
adjust.
larger
the pending
time
for
the
better
thethe
user
experience
The
smaller
threshold
of
event
4A
is
,
the
slower
is,
but 4A
it also
easier
to result
event
is
,
the
faster
response
system
will
in a wastethat
of radio
resources
response
that
system
willand
make to user's
demand,
because
of
unnecessary
make
to
user's
demand
, and
the
slower that
system
will
bandwidth
increase;
The
the
faster
that
system
will
increase
bandwidth,
larger
thethe
time
to trigger the
for
increase
the
bandwidth,
and
worse
the
user
experience
is;
event
4A
is
,
the
slower
the
better
thethe
user
experience
The
smaller
pending
time
response
thateasier
system
is,
but
it also
to will
result
for
event
4B is,
the faster
make
to user's
demand,
and
in
a
waste
of
radio
resources
response
that
system
the
slowerof
that
systemwill
will
because
unnecessary
make
to user's
demand, the
and
increase
the
bandwidth,
bandwidth
increase;
The
the
faster
that
system
will
worse
the threshold
user experience
is;
larger
the
of event
Function:
Measurement
decrease
thethe
bandwidth,
but
The
smaller
time
to
trigger
4A
is , easier
the
slower
response
quantity
of4B
the
user
itforalso
toRNC
result
in
event
is,
the
faster
that
system
will
make
to
plane
traffic
volume
unnecessary
bandwidth
response
that
system
will
user's
demand,
and the
measurement
increase
and
influence
user
make
to
user's
demand,
and
slower
that system
will
Configuration
Rule:
It
needs
experiences;
The
larger
the
the
faster
that
system
will
increase
thethe
bandwidth,
the
to
consider
user
pending
time
for
event 4B
is,
decrease
the
bandwidth,
but
worse
the
user
experience
is;
experiences
and
the
the
slower
response
that
itThe
also
easier
tothreshold
result in of
larger
the
utilization
of radio
system
willratio
make
to user's
unnecessary
bandwidth
event
4B and
is, the
resources.
demand,
thefaster
sloweruser
that
increase
and
influence
response
that
systemthe
will
The
recommended
system
willMeasurement
decrease
Function:
experiences;
The
larger
the
make
to user's
demand,
and
configuration
isfor
Average
RLC
bandwidth,
it will
make
the
Report
Mode
time
to Transfer
trigger
eventwill
4B
is,
the
faster
that
system
buffer
payload,
it can
make
utilization
ratio
of
radio
Configuration
Rule:
It
needs
the
slower
response
that
Function:
To
indicate
whether
decrease
the
bandwidth,
but
the
traffic
resources
low.
to
consider
the
successful
system
willvolume
to
user's
the
report
ofmake
RLC
buffer
it also
easier
tomore
result
in
measurement
correctly,
ratio
of measurement
report.
demand,
and
the radio
slower
that
payload
for
each
bear
unnecessary
bandwidth
and
then
thedecrease
utilization
of is
The
recommended
system
will
the
requested.
increase
and
influence
user
radio
resources
configuration
is more
bandwidth,
it will
make
thethe
The
recommended
experiences;
The
smaller
rationally.
Acknowledged
Mode
RLC
, it
utilization
ratio
of
radio
configuration
is to report
threshold of event
4B is, RLC
the
can
retransmission.
resources
low.
buffer
is used
for
slowerpayload,
responseit that
system
Function:
To
indicate
the
RNC'sto
decision
ofwhether
event
will make
user's
demand,
the
of average
of RLC
4B0
for UE's
traffic
andreport
the
slower
that volume
system
buffer
payloadthe
for
each
measurement.
When
UEradio it
will decrease
bandwidth,
bear
is
requested.
reports
event
4B, and the
will make
the utilization
ratio
Configuration
Rule:low.
It
RLC
buffer
payload
is needs
0, then
of radio
resources
Function:
Tothe
indicate
whether
to
radio
resource
it 'sconsider
considered
as event
4B0
the
report
of
Variance
of RLC
of
interface .
forUu
uplink.
Buffer
Payload
each radio
Average
of RLCfor
Buffer
bear
is requested.
Payload
is not recommended
Configuration
It needs
to be reportedRule:
for UE,
it can
to
consider
theresource
radio resource
save
the radio
of Uu
of
Uu interface.
interface
.
Payload is not recommended
to be reported, it can save
This
radioparameter
resource ofindicates
Uu interface
Object
ID of Intra-frequency
.
measurement profile
configuration.
Function: Intra-frequency
measurement profile identity
Related factor: the actual
scene

Next
measurement events
measurement
control
to adjust.
This parameter is a
Next
control
The reason of the
The reason of the
The reason of the
The reason of the
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the
4B0.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
Basic parameter
Cann't Modify

Immediately
planning.
for handover/reselection
scene
No
No
No
No
No
No
No
No
No
No
No
No
If the cell belongs to outdoor

scene, this parameter is 0;
If the cell belongs to highmobility outdoor scene, this
parameter is 1;
If the cell belongs to indoor
scene , this parameter is 2;
This
indicates
If theparameter
cell belongs
to subway/
Object
ID
of
Intra-frequency
tunnel scene, this parameter
measurement
configuration
is 3;
Function: Service type in
configuration
Function:
L3 filtering on the
network
condition.
This
parameter
indicates
measurement
results
Object
ID ofisIntra-frequency
This
value
the experience
event
measurement
of many
vendors and
configuration
for CPICH
operators. It can
guarantees
Ec/No
the filtering results and
reflects the measurement
Function:
number of events
results in time.
required
to be
configured
If the value
is bigger,
this for
a
certain purpose
intraFunction:
usedhas
forof
soft
HO
measurement
less
impact
frequency
measurement
addition
and
deletion.
on final intra-frequency
Related
factor:results.
measurement
soft HO area,
measurement
purpose
soft
HO
ratio
and
soft HO
Otherwise, if the value
is
The
parameter
setting is
success
rate.measurement
smaller,
this
based
on
how
many this
events
(1) 1A,
The
smaller
has
more
impact.
Function:
used
to
indicate
will
used
inra-frequency
parameter
is,inthe
Thisbe
parameter
is less
not
measurement
event
handover.That
isadjusted.
to say,
probability
this
suggested to trigger
be
Related
factor:
3GPP
Event
number
is
defined
event. Consequently, softby
HO
definition
measurement
area
becomes purpose.
smaller and
This
This parameter
parameter
ishave
not calluser
is easier toindicates
intra-frequency
suggested
beevents
adjusted.
drop.On
thetoother
side, the
defined
in protocol.
One
bigger this
parameter
is, array
the
bit
corresponds
to
one
event.
Function:
weight
when
more probability to trigger
this
evaluating
cell's quality
event.Consequently,
soft HO
Function:
used larger
to delay
Related
factor:
cell's
quality,
area becomes
andevent
soft
reporting,
decrease
average
HO
rate
HO success
ratio increases.In
this
HO
times
and
avoid
1A
and
1B:
When
UEerror
case,
the
consumption
of HO.
Related
factor:
average
evaluates
signal
quality,
ifHO
the
system capacity and softHO
times,
HO
success
rate,
UE
parameter
is
smaller,
the
success rate increase.
moving
and
HO
influence
of
best
is area.
bigger
Function:
used
tocell
delay
event
(2) 1B, speed
The
smaller
this
The
bigger
this
parameter
and
that ofdecrease
other
are is,
reporting,
average
parameter
is,
the cells
higher
the
less
possibility
to trigger
smaller.
a trigger
result,isHO
HO
timesAs
probability
to
this
event
this
event.
Consequently,
success
rate
increase.
Related
factor:
average
HO
and easier
to trigger
pingaverage
HO
decrease
Function:
control
the
Otherwise,
if times
the
times,
HO
success
rateside, is
pong HO.On
the parameter
other
and
the
risk
of
call-drop
maximum
number
of
cells
in
bigger,
the
influence
of
best
For
1E,
the
bigger
this
the bigger this parameter
is,
increase.
On
side,
active
setprobability
cell
is smaller
andother
that
of
parameter
is, the
the
harder
is to
the less
to trigger
when
this
parameter
Related
factor:
Proper
macro
other
cells
are
bigger,
then
trigger
this
event;
otherwise,
this event.Consequently,
becomes
smaller,
the
more
gain
error
HOlinks
may
occur.
the
smaller
this
parameter
is,
useless
are
in active set
possibility
to
trigger
this
When
theis
UE
that
the
easier
is
to detects
trigger
this
to
consume
system
resources
event,
average
HO times set
one
in the monitoring
event.
and cell
capacity.
increase
and
may this
result
satisfies
the
threshold
of in
For 1F, the
bigger
error
HO.
event
1a, itis,
first
parameter
thejudges
easier is to
Suggestion:
for theotherwise,
scenario
whether
theevent;
number
of the
trigger this
that
HO
area
is
small
or UE
cells
in
the
current
active
set
the smaller this parameter
is,
moves
fast,
this
parameter
is
not
bigger
than
the
value
the harder is to trigger this
should beby
setthis
small;
and viceIf
indicated
parameter.
event.
versa.
so,
event
1a is
is easier
triggered.
If
When
event
to be
not,
event average
1a is notHO times
triggered,
triggered.For
the rate
maximum
and HO success
number
of
radio
links
increase, but system in DCH
active
set is
3,be
thisconsumed
parameter
resources
will
configuration
should be
more.
match with the maximum
number of radio links in DCH
the actual scene is

default value.
Immediately
Basic parameter
Cann't Modify

Can't Modify
planning.
Basic parameter
Cann't Modify

default value.
When best cell is

changed
Measurement purpose is
default value.
When best cell is

changed
3GPP definition is considered When best cell is

changed
Proper soft HO ratio, soft HO

success rate and system
When best cell is
capacity are considered to
changed
HO success rate is mainly
default value.
When best cell is

changed
Normal mobility scenario and

HO success rate are
When best cell is
changed
default value.
Average HO times and HO
success rate are considered
When best cell is

changed
Proper macro gain is

default value.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
Related factor: Proper macro

gain, soft HO times
For
the maximum
number
of
Function:
used to delay
event
radio
links
in
DCH
active
set
reporting, decrease average
is
the parameter
1C HO.
HO3,times
and avoidfor
error
event
is
configured
to
the
Related factor: average HO
maximum
thisUE
times,
HO number.
success In
rate,
case,
radio
linkand
replace
is
moving
speed
HO area.
triggered
only
when
the
radio
The bigger this parameter
is,
links
in
active
set
reaches
to
the
longer
is
to
trigger
the
Function:
Report
amount after
the
maximum
number,
event.
Consequently,
event
triggered
in
softaverage
HO
enhancing
macro gain
HO timesfactor:
decrease
andand
the
Related
HO
success
reducing
average
HO times.
risk
of call-drop
increase.
On
rate
Currently,
this parameter
is
the
other
side,
when
this
In
orderfor
toevent
avoid 1J.
missing
invalid
parameter
becomes
smaller,
1a/1b/1c/1j
event
lead
This
parameter
is which
not
average
HO
times
increase
to
handover
failure,
events
suggested
to beinadjusted.
and
may result
errorafter
HO.
Function:
Report
interval
after
are repeated
to report
Suggestion:
for in
thesoft
event
triggered
HO
they
are
triggered.
Ifscenario
the
that
HOreports
area
is HO
small
or UE
Related
factor:
success
events'
are
more,
the
moves
fast,
this
parameter
rate
events are harder to be
should
be
small;
and rate
vice
If
this parameter
is bigger,
missed
andset
HO
success
versa.
events
are
reported
slower,
increase, but system resource
possibility
of call-drop
is consumed
more.
increases,
HO success
Otherwise, and
the events'
reports
rate
falls then
down.HO
Otherwise,
are less,
success
this
is smaller,
Function:
L3 filtering
on the
rate parameter
may decrease.
This
parameter
indicates
events
are
reported
frequently
measurement results
Object
IDsuccess
ofisIntra-frequency
and HO
rate
This
value
the experience
event
measurement
increases,
but more
of
many
vendors
andsystem
configuration
for
CPICH
resources are
taken
up.
operators.
It can
guarantees
RSCP
Function:
number of events
results in time.
required
to be
configured
If the value
is bigger,
this for
a
certain purpose
intraFunction:
usedhas
forof
soft
HO
measurement
less
impact
frequency
measurement
addition
and
deletion.
Related
factor:results.
measurement
soft HO area,
measurement
purpose
soft
HO
ratio
and
soft HO
Otherwise, if the value
is
The
parameter
setting is
success
rate.measurement
smaller,
this
based
on
how
many this
events
(1) 1A,
The
smaller
has
more
impact.
Function:
used
to
indicate
will
used
inra-frequency
parameter
is,inthe
Thisbe
parameter
is less
not
measurement
event
handover.That
isadjusted.
to say,
probability
this
suggested to trigger
be
Related
factor:
3GPP
Event
number
is
defined
event. Consequently, softby
HO
definition
measurement
area
becomes purpose.
smaller and
This
This parameter
parameter
ishave
not calluser
is easier toindicates
intra-frequency
suggested
beevents
adjusted.
drop.On
thetoother
side, the
defined
in protocol.
One
bigger this
parameter
is, array
the
bit
corresponds
to
one
event.
Function:
weight
when
more probability to trigger
this
evaluating
cell's quality
event.Consequently,
soft HO
Function:
used larger
to delay
Related
factor:
cell's
quality,
area becomes
andevent
soft
reporting,
decrease
average
HO
rate
HO success
ratio increases.In
this
HO
times
and
avoid
1A
and
1B:
When
UEerror
case,
the
consumption
of HO.
Related
factor:
average
evaluates
signal
quality,
ifHO
the
system capacity and softHO
times,
HO
success
rate,
UE
parameter
is
smaller,
the
success rate increase.
moving
and
HO
influence
of
best
is area.
bigger
Function:
used
tocell
delay
event
(2) 1B, speed
The
smaller
this
The
bigger
this
parameter
and
that ofdecrease
other
are is,
reporting,
average
parameter
is,
the cells
higher
the
less
possibility
to trigger
smaller.
a trigger
result,isHO
HO
timesAs
probability
to
this
event
this
event.
Consequently,
success
rate
increase.
Related
factor:
average
HO
and easier
to trigger
pingaverage
HO
decrease
Otherwise,
if times
the
times,
HO
success
rateside, is
pong HO.On
the parameter
other
and
the
risk
of
call-drop
bigger,
the
influence
of best
For
1E,
the
bigger
this
the bigger this parameter
is,
increase.
On
side,
cell
is smaller
andother
that
of
parameter
is, the
the
harder
is to
the less
probability
to trigger
when
this
other
cells
are
bigger,
then
trigger
thisparameter
event;
otherwise,
this event.Consequently,
becomes
smaller,
moreset
error
HOlinks
may
occur.
the
smaller
this
parameter
is,
useless
are
inthe
active
possibility
to
this
the
easier is
is system
to trigger
trigger
this
to consume
resources
event,
average HO times
event.
and capacity.
increase
and
may this
result in
For 1F, the
bigger
error
HO.
parameter is, the easier is to
Suggestion:
for theotherwise,
scenario
trigger this event;
that
HO
area
is
small
or UEis,
the smaller this parameter
moves
fast,
this
parameter
the harder is to trigger this
should be set small; and vice
event.
versa.
When event is easier to be
triggered, average HO times
and HO success rate
Proper macro gain and soft

HO times are considered to
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify

default value.
When best cell is

changed
default value.
When best cell is

changed

changed

When best cell is
changed
default value.
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
Average HO times and HO
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
When the UE detects that

one cell in the monitoring set
satisfies the threshold of
event 1a, it first judges
Function:
to number
control radio
whether the
of thelinks
replace
cells in the current active set
Related
factor:
Proper
macro
is not bigger
than
the value
gain,
soft by
HOthis
times
indicated
parameter. If
For
the maximum
number
so, event
1a
is triggered.
Ifof
Function:
used
to delay
event
radio
links
in
DCH
active
set
not, event decrease
1a is not average
reporting,
is
the parameter
for
1C HO.
triggered.For
maximum
HO3,times
andthe
avoid
error
event
is
configured
to
the
number
of
radio
links
in
Related factor: average DCH
HO
maximum
number.
In
thisUE
active set
3, this parameter
times,
HO is
success
rate,
case,
radio
link
replace
is
configuration
should
bearea.
moving
speed
and
HO
triggered
only
when
the
radio
match
with the
The
bigger
this maximum
parameter
is,
links
in
active
set
reaches
to
number
of
radio
links
in
DCH
the
longer
is
to
trigger
the
Function:
Report
amount after
the
maximum
active
set.
(onenumber,
smaller
than
event.
Consequently,
event
triggered
in
softaverage
HO
enhancing
macro
gain
and
the
maximum
number
of
radio
HO timesfactor:
decrease
and the
Related
HOHO
success
reducing
average
times.
links
in
DCH
active
set)
risk
of
call-drop
increase.
On
rate
Currently,
this parameter
is
This
parameter
is
not
the
other
side,
when
this
In
orderfor
toevent
avoid 1J.
missing
invalid
suggested
to
be adjusted.
parameter
becomes
smaller,
1a/1b/1c/1j
event
lead
This
parameter
is which
not
average
HO
times
increase
to
handover
failure,
events
suggested
to beinadjusted.
and
may result
errorafter
HO.
Function:
Report
interval
after
are repeated
to report
Suggestion:
for in
thesoft
event
triggered
HO
they
are
triggered.
Ifscenario
the
that
HOreports
area
is HO
small
or UE
Related
factor:
success
events'
are
more,
the
moves
fast,
this
parameter
rate
events are harder to be
should
be
small;
and rate
vice
If
this parameter
is bigger,
missed
andset
HO
success
versa.
events
are
reported
slower,
possibility
of call-drop
is consumed
more.
increases,
HO success
Otherwise, and
the events'
reports
rate
falls then
down.HO
Otherwise,
are less,
success
this
is smaller,
rate parameter
may decrease.
This
parameter
indicates
events
are reported
frequently
Object
of Intra-frequency
and HOIDsuccess
rate
event
measurement
increases,
but more system
configuration
resources areunrelated
taken up.to
traffic category.
Function: L3 filtering on the
This
parameterresults
indicates
measurement
Object
This
value
the experience
period
measurement
of many
vendors and
configuration
for CPICH
operators. It can
guarantees
EcNo.
Function:
report amounts in
results in time.
periodical
If the valuereporting
is bigger, this
Related
factor:has
HOless
success
measurement
impact
rate
The
parameterresults.
is bigger, the
measurement
result
is
HO
judgment
Otherwise, if the valueisismore
Function:
Report
interval rate
in
precise
HO
success
smaller, and
this
measurement
periodical
reporting
increase,
system resource
has more but
impact.
Related
factor:
HO
success
is
consumed
more.Otherwise,
This
parameter
is not
rate
The
parameter
is
smaller,
suggested to be adjusted. the
If
this parameter
is bigger,
events'
reports are
less, the
report
slower,
possibility
of
risk of is
call
drop increase
and
call-drop
increases,
and
HO
then HO success
rate
may
success
rate falls down.
decrease.
Otherwise, this parameter is
Function:
L3 filtering
on the
smaller,
report
isindicates
frequent
and
This
parameter
measurement
results
HO success
rate increases,
Object
ID
of
Intra-frequency
This
valuesystem
is the experience
but
more
resources
period
measurement
of
many
vendors
and
are
taken
up.
configuration
for CPICH
operators. It can
guarantees
RSCP.
results in time.
If the value is bigger, this
measurement has less impact
measurement results.
Otherwise, if the value is
smaller, this measurement
has more impact.
This parameter is not
suggested to be adjusted.

default value.
When best cell is

changed
Proper macro gain and soft

HO times are considered to
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify
Basic parameter
Cann't Modify

default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify

default value.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
Function: report amounts in

periodical reporting
Related factor: HO success
rate
The parameter is bigger, the
result is HO judgment is more
Function:
Report
interval rate
in
precise and
HO success
periodical
reporting
Related
factor:
HO success
is consumed
more.Otherwise,
rate
The parameter is smaller, the
If
this parameter
is bigger,
events'
reports are
less, the
report
slower,
possibility
of
risk of is
call
drop increase
and
call-drop
increases,
and
HO
then HO success
rate
may
Function:
used
fordown.
soft HO
success
rate
falls
decrease.
addition
andthis
deletion.
Otherwise,
parameter is
Function:
L3 filtering
on area,
the
Related
factor:
soft
HO
smaller,
report
is
frequent
and
This
parameter
indicates
measurement
results
soft
HO
ratio
and
soft
HO
HO
success
rate
increases,
Object
This
value
the experience
success
rate.
but more
system
resources
detected
set
measurement
of
many
vendors
andthis
(1) taken
1A, The
are
up.smaller
configuration
for
CPICH
operators.
Itis,can
parameter
theguarantees
less
EcNo.
the
filtering
results
probability to triggerand
this
reflects
the measurement
event. Consequently,
soft HO
results
in time. smaller and
area
becomes
If
theisvalue
is bigger,
user
easier
to havethis
callmeasurement
has side,
less impact
drop.On the other
the
on
finalthis
intra-frequency
bigger
parameter is, the
measurement
results.
Function:
weight
when
more probability
to
trigger this
Otherwise,
if
the
value
is HO
evaluating
cell's
quality
event.Consequently, soft
Function:
used
to delay
smaller,
this
measurement
Related
factor:
cell's
quality,
area becomes
larger
andevent
soft
reporting,
decrease
average
has
moreincreases.In
impact.
HO
rate
HO success
ratio
this
HO
times
and
avoid
This
parameter
is not
1A
and
1B:
When
UEerror
case,
the
consumption
of HO.
Related
factor:
average
suggested
to
be
adjusted.
evaluates
signal
quality,
ifHO
the
system
capacity
and
softHO
Function:
control
therate,
times,
HO
success
UE
parameter
is
smaller,
the
success
rate
increase.
maximum
number
of
cells
in
moving
speed
and
HO
area.
influence
of
best
cell
is
bigger
(2)
1B,
The
smaller
this
active
set
The
bigger
this
parameter
and
that of is,
other
cells
are is,
parameter
the
higher
Related
factor:
Proper
macro
the
less
possibility
is
to
smaller.
Asto
a trigger
result, HO
probability
thistrigger
event
gain
this
event.
Consequently,
success
rate
increase.
and
easier
to
trigger
pingWhen the
detects
that is
average
HOUE
decrease
Otherwise,
if times
the
parameter
pong
HO.On
the
other
side,
one
cell
in
the
monitoring
set
and
thethe
riskthis
of parameter
call-drop
bigger,
influence
of best
the
bigger
is,
satisfies
the
threshold
of
increase.
On
the
other
side,
cell
is smaller
and
that
ofevent
the
less
to trigger
Function:
to
delay
event
1a,probability
itused
firstbigger,
judges
when
this
parameter
other
cells
are
then
this
event.Consequently,
reporting,
decrease
average
whether
the
number
ofmore
the
becomes
smaller,
error
HOlinks
may
occur.
useless
are
inthe
active
set
HO
times
and
avoid
error
HO.
cells
in
the
current
active
possibility
is system
to trigger
thisset
to
consume
resources
Related
factor:
average
HO
is
not bigger
than
value
event,
average
HOthe
times
and
capacity.
times,
HOand
success
rate, in
UE If
indicated
by
this
increase
mayparameter.
result
moving
speed
and
HO
area.
so,
errorevent
HO. 1a is triggered. If
The
bigger1a
this
is,
not,
event
is parameter
not scenario
Suggestion:
for
the
the
longer
is
to
trigger
the
triggered.For
the
maximum
Function:
Report
amount
after
that HO area
is small
or UE
event.
Consequently,
average
number
of radio
links
DCH
event
softin
HO
movestriggered
fast,
thisinparameter
HO
times
decrease
and
active
set
is
this
Related
factor:
HO parameter
success
should
be
set3,small;
andthe
vice
risk
of call-drop
increase.
configuration
should
be On
rate
versa.
the
other
this
match
with
the when
maximum
In
order
toside,
avoid
missing
parameter
becomes
smaller,
number of radio
in DCH
1a/1b/1c/1j
eventlinks
which
lead
average
HO
times
increase
active
set.
(one
smaller
than
to handover
failure,
events
and
may result
in
errorafter
HO.
Function:
Report
interval
after
the
number
of
radio
are maximum
repeated
to
report
Suggestion:
for
thesoft
scenario
event
in
HO
links are
intriggered
DCH
active
they
triggered.
Ifset)
the
that
area
is HO
small
or UE
Related
factor:
success
This HO
parameter
is not
events'
reports
are
more,
the
moves
fast,
this
parameter
rate
suggested
be adjusted.
events
are to
harder
to be
should
be
small;
and rate
vice
If
this parameter
is bigger,
missed
andset
HO
success
versa.
events
are
reported
slower,
possibility
of call-drop
is consumed
more.
increases,
HO success
Otherwise, and
the events'
reports
rate
falls then
down.HO
Otherwise,
are less,
success
this
is smaller,
rate parameter
may decrease.
This
parameter
indicates
events
are reported
frequently
Object
of Intra-frequency
and HOIDsuccess
rate
detected
increases,set
butmeasurement
more system
configuration
CPICH
resources arefor
taken
up.
Rscp.
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify

default value.
When best cell is

changed

When best cell is
changed
default value.
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
default value.
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
Related factor: soft HO area,

measurement
results
soft
HO ratio and
soft HO
This
value
is the experience
success
rate.
of
vendors
andthis
(1)many
1A, The
smaller
operators.
It
can
guarantees
parameter is, the less
the
filteringtoresults
probability
triggerand
this
reflects
the
measurement
event. Consequently, soft HO
results
in time. smaller and
area
becomes
If
theisvalue
is bigger,
user
easier
to havethis
callmeasurement
has side,
less impact
drop.On the other
the
on
finalthis
intra-frequency
bigger
parameter is, the
measurement
results.
Function:
weight
when
more probability
to
trigger this
Otherwise,
if
the
value
is HO
evaluating
cell's
quality
event.Consequently, soft
Function:
used
to delay
smaller,
this
measurement
Related
factor:
cell's
quality,
area
becomes
larger
andevent
soft
reporting,
decrease
average
has
moreincreases.In
impact.
HO
rate
HO success
ratio
this
HO
times
and
avoid
This
parameter
is not
1A
and
1B:
When
UEerror
case,
the
consumption
of HO.
Related
factor:
average
suggested
to
be
adjusted.
evaluates
signal
quality,
ifHO
the
system
capacity
and
softHO
Function:
control
therate,
times,
HO
success
UE
parameter
is
smaller,
the
success
rate
increase.
maximum
number
of
cells
in
moving
speed
and
HO
area.
influence
of
best
cell
is
bigger
(2)
1B,
The
smaller
this
active
set
The
bigger
this
parameter
and
that of is,
other
cells
are is,
parameter
the
higher
Related
factor:
Proper
macro
the
less
possibility
is
to
smaller.
Asto
a trigger
result, HO
probability
thistrigger
event
gain
this
event.
Consequently,
success
rate
increase.
and
easier
to
trigger
pingWhen the
detects
that is
average
HOUE
decrease
Otherwise,
if times
the
parameter
pong
HO.On
the
other
side,
one
cell
in
the
monitoring
set
and
thethe
riskthis
of parameter
call-drop
bigger,
influence
of best
the
bigger
is,
satisfies
the
threshold
of
increase.
On
the
other
side,
cell
is smaller
and
that
ofevent
the
less
to trigger
Function:
to
delay
event
1a,probability
itused
firstbigger,
judges
when
this
parameter
other
cells
are
then
this
event.Consequently,
reporting,
decrease
average
whether
the
number
ofmore
the
becomes
smaller,
error
HOlinks
may
occur.
useless
are
inthe
active
set
HO
times
and
avoid
error
HO.
cells
in
the
current
active
possibility
is system
to trigger
thisset
to
consume
resources
Related
factor:
average
HO
is
not bigger
than
value
event,
average
HOthe
times
and
capacity.
times,
HOand
success
rate, in
UE If
indicated
by
this
increase
mayparameter.
result
moving
speed
and
HO
area.
so,
errorevent
HO. 1a is triggered. If
The
bigger1a
this
is,
not,
event
is parameter
not scenario
Suggestion:
for
the
the
longer
is
to
trigger
the
triggered.For
the
maximum
Function:
Report
amount
after
that HO area
is small
or UE
event.
Consequently,
average
number
of radio
links
DCH
event
softin
HO
movestriggered
fast,
thisinparameter
HO
times
decrease
and
active
set
is
this
Related
factor:
HO parameter
success
should
be
set3,small;
andthe
vice
risk
of call-drop
increase.
configuration
should
be On
rate
versa.
the
other
this
match
with
the when
maximum
In
order
toside,
avoid
missing
parameter
becomes
smaller,
number of radio
in DCH
1a/1b/1c/1j
eventlinks
which
lead
average
HO
times
increase
active
set.
(one
smaller
than
to handover
failure,
events
and
may result
in
errorafter
HO.
Function:
Report
interval
after
the
number
of
radio
are maximum
repeated
to
report
Suggestion:
for
thesoft
scenario
event
in
HO
links are
intriggered
DCH
active
they
triggered.
Ifset)
the
that
area
is HO
small
or UE
Related
factor:
success
This HO
parameter
is not
events'
reports
are
more,
the
moves
fast,
this
parameter
rate
suggested
be adjusted.
events
are to
harder
to be
should
be
small;
and rate
vice
If
this parameter
is bigger,
missed
andset
HO
success
versa.
events
are
reported
slower,
possibility
of call-drop
is consumed
more.
increases,
HO success
Otherwise, and
the events'
reports
rate
falls then
down.HO
Otherwise,
are less,
success
this
is smaller,
rate parameter
may decrease.
events
are
reported
frequently
and
HO
success
rate
Object ID of Inter-frequency
increases,
but profile
more system
measurement
resources
are
taken
up.
configuration.
Function: scene parameter
Function:
Inter-frequency
measurement
identity
Related
factor:profile
the actual
Related
scene factor: the actual
scene
parameter is 1;
This
indicates
If theparameter
cell belongs
to subway/
Object
ID of Inter-frequency
tunnel scene,
this parameter
measurement
configuration
is 3;

default value.
When best cell is

changed

When best cell is
changed
default value.
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
default value.
When best cell is

changed

HO success rate are
When best cell is
changed
default value.
HO success rate is
default value.
When best cell is

changed
HO success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify

Immediately
planning.
the actual scene is

default value.
Immediately
Basic parameter
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
Function: Service type in

inter-frequency measurement
configuration
network
condition.
This
parameter
indicates
Function:
L3 filtering
on the
measurement
results
event
measurement
Configuration
Rule: signal
configuration
for CPICH
quality variation,
Ec/No
(UTRAN)
.
measurement
timeliness
Function:
number
events
measurement
has of
less
impact
required
to be configured for
on final inter-frequency
a
certain purpose
of intermeasurement
results.
frequency
Otherwise,measurement
if the value is
Configuration
Rule:
measurement
purpose
Function:
used
to delay event
has more impact.
The
parameter
setting
is This
reporting,
decrease
average
based
on how
many
events to
handover
times
parameter
is not
suggested
Function:
used
to indicate
will
be used
inRule:
inter-frequency
Configuration
average
be adjusted.
measurement
event
handover.That
is
to say,
handover times, handover
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
For
2D, the bigger
this
This
parameter
Adjustment
Suggestion:
notto
parameter
is,
theindicates
easier is
inter-frequency
events
suggest
to
adjust
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this parameter
evaluating
cell's
quality
of is,
bit
corresponds
to
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the
easier
is
to
trigger
this
smaller, the
influence
of event
best
Function:
used
to moving
delay
success
rate,
UE
event.
cell
of used
frequency
is
reporting,
decrease
average
speed
and
handover
area
When
event
is easier
to cells
be
bigger
andtimes
that
of
other
handover
and
avoid
The
bigger
this parameter
is,
triggered,
average
handover
are
smaller.
As a result,
error
handover.
the
less
possibility
is
to
trigger
times
and success
handover
success
handover
Configuration
Rule:rate
average
this
event.
Consequently,
rate
increase,
but
system
increase.
Otherwise,
if the
handover
times, handover
average
handover
times
resources
will
be consumed
parameter
is bigger,
the
success
rate,
UE
moving
decrease
and
the
risk
of callmore.
Function:
used
tocell
delay
event
influence
best
used
speed
andof
handover
area.
drop increase.
On
theof
other
reporting,
decrease
average
frequency
is
smaller
and
The
bigger
this
parameter
is,
side, when this parameterthat
handover
times
of
other
cells
are
bigger,
then
the
longer
is
to
trigger
the
becomes smaller, the more
Configuration
error
handover
may average
occur.
event.
Consequently,
average
possibility
is toRule:
trigger
this
handover
times,
handoverand
handover
times handover
decrease
event, average
success
the
risk
ofrate
call-drop
increase.
times
increase
and may
result
For
2B/2C,
the
smaller
On
the other
side,
whenthe
this
Function:
weight
when
in error
handover.
parameter
is,
thequality
larger
parameter
becomes
smaller,
evaluating
offor
Adjustmentcell's
Suggestion:
probability
to that
trigger
interaverage
handover
times
non-used
frequency
the scenario
handover
frequency
handover.
increase
and
may
result
in
Configuration
Rule:
cell's
area is small or UE moves
For
the
smaller
the
error
handover.
quality,
handover
success
fast,2E,
this
parameter
should be
parameter
the
larger
Suggestion:
the
scenario
rate
set small. is,for
probability
to
activate
inter-to
that handover
is expected
When
UE evaluates
signal
RAT
measurement.easier
triggered
quickly,
this
quality, if the parameter is is
to
triggerthe
this
event.
parameter
should
be set
smaller,
influence
of best
When
event
is easier
to be is
small;
vice
versa.
cell
of and
non-used
frequency
triggered,
handover
bigger andaverage
that of other
cells
times
and
handover
success
are smaller. As a result,
rate
increase,
but system
handover
success
rate
This
parameter
indicates
resources
will
be
consumed
increase.
Otherwise,
if the
Object
ID
of
Inter-frequency
more.
parameter
is bigger, the
event measurement
influence
of best
cell of used
configuration
for CPICH
frequency
is
smaller
RSCP (UTRAN) . and that
of other cells are bigger, then
error handover may occur.

Can't Modify
planning.
Basic parameter
Cann't Modify
Signal quality variation and

measurement timeliness are
value.
When best cell is

changed
default value.
When best cell is

changed

changed
Average handover times and

When best cell is
changed
default value.
handover success rate is
default value.
Average handover times,
handover success rate, UE
moving speed and handover
area are taken into account
in default value.
handover success rate and
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed

When best cell is
changed
default value.
Handover success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
Function: L3 filtering on the

measurement results
Configuration Rule: signal
quality variation,
measurement timeliness
Function:
number
events
measurement
has of
less
impact
required
a
certain purpose
of intermeasurement
results.
frequency
if the value is
Configuration
Rule:
measurement
purpose
Function:
used
to delay event
has more impact.
The
parameter
setting
is This
reporting,
decrease
average
based
on how
many
events to
handover
times
parameter
is not
suggested
Function:
used
to indicate
will
be used
inRule:
inter-frequency
Configuration
average
be adjusted.
measurement
event
handover.That
is
to say,
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
For
2D, the bigger
this
This
parameter
Adjustment
Suggestion:
notto
parameter
is,
theindicates
easier is
inter-frequency
events
suggest
to
adjust
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this parameter
evaluating
cell's
quality
of is,
bit
corresponds
to
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the
easier
is
to
trigger
this
smaller, the
influence
of event
best
Function:
used
to moving
delay
success
rate,
UE
event.
cell
of used
frequency
is
reporting,
decrease
average
speed
and
handover
area
When
event
is easier
to cells
be
bigger
andtimes
that
of
other
handover
and
avoid
The
bigger
this parameter
is,
triggered,
average
handover
are
smaller.
As a result,
error
handover.
the
less
possibility
is
to
trigger
times
and success
handover
success
handover
Configuration
Rule:rate
average
this
event.
Consequently,
rate
increase,
but
system
increase.
Otherwise,
if the
handover
times, handover
average
handover
times
resources
will
be consumed
parameter
is bigger,
the
success
rate,
UE
moving
decrease
and
the
risk
of callmore.
Function:
used
tocell
delay
event
influence
best
used
speed
andof
handover
area.
drop increase.
On
theof
other
reporting,
decrease
average
frequency
is
smaller
and
The
bigger
this
parameter
is,
handover
times
of
other
cells
are
bigger,
then
the
longer
is
to
trigger
the
Configuration
error
handover
may average
occur.
event.
Consequently,
average
possibility
is toRule:
trigger
this
handover
times,
handoverand
handover
times handover
decrease
event, average
success
the
risk
ofrate
call-drop
increase.
times
increase
and may
result
For
2B/2C,
the
smaller
On
the other
side,
whenthe
this
Function:
weight
when
in error
handover.
parameter
is,
thequality
larger
parameter
becomes
smaller,
evaluating
offor
Adjustmentcell's
Suggestion:
probability
to that
trigger
interaverage
handover
times
non-used
frequency
the scenario
handover
frequency
handover.
increase
and
may
result
in
Configuration
Rule:
cell's
area is small or UE moves
For
the
smaller
the
error
handover.
quality,
handover
success
fast,2E,
this
parameter
should be
parameter
the
larger
Suggestion:
the
scenario
rate
set small. is,for
probability
to
activate
inter-to
that handover
is expected
When
UE evaluates
signal
RAT
measurement.easier
triggered
quickly,
this
quality, if the parameter is is
to
triggerthe
this
event.
parameter
should
be set
smaller,
influence
of best
When
event
is easier
to be is
small;
vice
versa.
cell
of and
non-used
frequency
triggered,
handover
bigger andaverage
that of other
cells
times
and
handover
success
are smaller. As a result,
rate
increase,
but system
handover
success
rate
This
parameter
indicates
Function:
L3
filtering
on
the
resources
will
be
consumed
increase.
Otherwise,
if the
Object
measurement
resultsthe
more. ID ofisInter-frequency
parameter
bigger,
event
measurement
Configuration
Rule:
influence
of best
cellsignal
of used
configuration
for CPICH
quality
variation,
frequency
is
smaller
and
Ec/No
(GSM) .timeliness that
measurement
of other cells are
bigger, then
If
the handover
value is bigger,
this
error
may
occur.
Function:
number
events
measurement
has of
less
impact
required
a
certain purpose
of intermeasurement
results.
frequency
if the value is
Configuration
Rule:
measurement
purpose
has more impact.
The
parameter
setting is This
Adjustment
Suggestion:
based
on how
many
events to
parameter
is not
suggested
will
be used in inter-frequency
be adjusted.
handover.That is to say,
Event number is defined by
measurement purpose.
Adjustment Suggestion: not
suggest to adjust

value.
When best cell is

changed
default value.
When best cell is

changed

changed

When best cell is
changed
default value.
default value.
in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed

When best cell is
changed
default value.
Handover success rate is
default value.
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed
default value.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
Function: used to delay event

handover times
Function:
usedRule:
to indicate
Configuration
average
measurement
event
Configuration
success rate Rule: 3GPP
definition
For
2D, the bigger this
This
parameter
parameter
is, theindicates
easier is to
inter-frequency
events
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this
parameter
evaluating
cell's to
quality
of is,
bit
corresponds
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the
easier
is
to
trigger
this
smaller, the
influence
of event
best
Function:
used
to moving
delay
success
rate,
UE
event.
cell
of used
frequency
is
reporting,
decrease
average
speed
and
handover
area
When
event
is easier
to cells
be
bigger
andtimes
that
of
other
handover
and
avoid
The
bigger
this parameter
is,
triggered,
average
handover
are
smaller.
As a result,
error
handover.
the
less
possibility
is
to
trigger
times
and success
handover
success
handover
Configuration
Rule:rate
average
this
event.
Consequently,
rate
increase,
but
system
increase.
Otherwise,
if the
handover
times, handover
average
handover
times
resources
will
be consumed
parameter
is bigger,
the
success
rate,
UE
moving
decrease
and
the
risk
of callmore.
influence
best
used
speed
andofhandover
area.
drop increase.
Oncell
theof
other
frequency
is
smaller
and
The
bigger
this
parameter
is,
of
other
cells
are
bigger,
then
the
longer
is
to
trigger
the
error
handover
may occur.
event.
Consequently,
average
possibility
is to trigger
this
handover
times handover
decrease and
event, average
the
risk
of call-drop
increase.
times
increase
and may
result
On
the other
side, when this
in error
handover.
parameter
smaller,
Adjustmentbecomes
Suggestion:
for
This
parameter
indicates
average
handover
times
Function:
L3 that
filtering
on the
the scenario
handover
Object
of Inter-frequency
increase
and
may
in
measurement
results
area is ID
small
or
UEresult
moves
event
measurement
error
handover.
Configuration
Rule: signal
fast, this
parameter
should be
configuration
forthe
CPICH
Suggestion:
for
scenario
quality
variation,
set small.
RSCP
(GSM)
.
that handover is
expected to
measurement
timeliness
triggered
quickly,
this this
If the value
is bigger,
Function:
number
events
parameter
should
be
setimpact
measurement has of
less
required
to vice
be configured
for
small;
versa.
on
finaland
inter-frequency
a
certain purpose
of intermeasurement
results.
frequency
if the value is
Configuration
Rule:
measurement
purpose
Function:
used
to delay event
has more impact.
The
parameter
setting
is This
reporting,
decrease
average
Adjustment
Suggestion:
based
on how
many
events to
handover
times
parameter
is not
suggested
Function:
used
to indicate
will
be used
inRule:
inter-frequency
Configuration
average
be adjusted.
measurement
event
handover.That
is
to say,
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
For
2D, the bigger
this
This
parameter
Adjustment
Suggestion:
notto
parameter
is,
theindicates
easier is
inter-frequency
events
suggest
to
adjust
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this parameter
evaluating
cell's
quality
of is,
bit
corresponds
to
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the easier
isinfluence
to trigger
this
smaller,
the
of
success
rate, UE movingbest
event.
cell
of
used
frequencyarea
is
speed
and handover
When
event
is easier
to cells
be
bigger
and
that
of
other
The
biggeraverage
this parameter
is,
triggered,
handover
are
smaller.
As a result,
the
less
possibility
is
to
trigger
times
and success
handoverrate
success
handover
this
event.
Consequently,
rate
increase,
but
system
increase.handover
Otherwise,
if the
average
times
resources will
be consumed
parameter
is bigger,
the
decrease
and
the
risk
of callmore.
influence
of best
used
drop increase.
Oncell
theofother
frequency
is
smaller
and
of
other cells
are bigger,
then
becomes
smaller,
the more
error
handover
may
occur.
possibility is to trigger this
event, average handover
times increase and may result
in error handover.
Adjustment Suggestion: for

changed

When best cell is
changed
default value.
default value.
in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed
default value.
When best cell is

changed

changed

When best cell is
changed
default value.
default value.
When best cell is

changed

When best cell is
changed
in default value.
No
No
No
No
No
No
No
No
No
No
No
No
Configuration Rule: average

success rate, UE moving
speed and handover area.
The bigger this parameter is,
the longer is to trigger the
event. Consequently, average
handover times decrease and
the risk of call-drop increase.
On the other side, when this
parameter becomes smaller,
This
parameter
indicates
average
handover
times
Function:
L3 filtering
on the
Object
IDand
of Inter-frequency
increase
may
result in
measurement
results
event
measurement
error handover.
Configuration
Rule: signal
configuration
forthe
CPICH
Suggestion:
for
scenario
quality
variation,
Ec/No
(EUTRAN)
.
that handover is
expected
to
measurement
timeliness
triggered
quickly,
this this
If the value
is bigger,
Function:
number
events
parameter
should
be
setimpact
measurement
has of
less
required
to vice
be configured
for
small;
versa.
on
finaland
inter-frequency
a
certain purpose
of intermeasurement
results.
frequency
if the value is
Configuration
Rule:
measurement
purpose
Function:
used
to delay event
has more impact.
The
parameter
setting
is This
reporting,
decrease
average
based
on how
many
events to
handover
times
parameter
is not
suggested
Function:
used
to indicate
will
be used
inRule:
inter-frequency
Configuration
average
be adjusted.
measurement
event
handover.That
is
to say,
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
For
2D, the bigger
this
This
parameter
Adjustment
Suggestion:
notto
parameter
is,
theindicates
easier is
inter-frequency
events
suggest
to
adjust
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this parameter
evaluating
cell's
quality
of is,
bit
corresponds
to
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the
easier
is
to
trigger
this
smaller, the
influence
of event
best
Function:
used
to moving
delay
success
rate,
UE
event.
cell
of used
frequency
is
reporting,
decrease
average
speed
and
handover
area
When
event
is easier
to cells
be
bigger
andtimes
that
of
other
handover
and
avoid
The
bigger
this parameter
is,
triggered,
average
handover
are
smaller.
As a result,
error
handover.
the
less
possibility
is
to
trigger
times
and success
handover
success
handover
Configuration
Rule:rate
average
this
event.
Consequently,
rate
increase,
but
system
increase.
Otherwise,
if the
handover
times, handover
average
handover
times
resources
will
be consumed
parameter
is bigger,
the
success
rate,
UE
moving
decrease
and
the
risk
of callmore.
influence
best
used
speed
andofhandover
area.
drop increase.
Oncell
theof
other
frequency
is
smaller
and
The
bigger
this
parameter
is,
of
other
cells
are
bigger,
then
the
longer
is
to
trigger
the
error
handover
may occur.
event.
Consequently,
average
possibility
is to trigger
this
handover
times handover
decrease and
event, average
the
risk
of call-drop
increase.
times
increase
and may
result
On
the other
side, when this
in error
handover.
parameter
smaller,
Adjustmentbecomes
Suggestion:
for
This
parameter
indicates
average
handover
times
Function:
L3 that
filtering
on the
the scenario
handover
Object
of Inter-frequency
increase
and
may
in
measurement
results
area is ID
small
or
UEresult
moves
event
measurement
error
handover.
Configuration
Rule: signal
fast, this
parameter
should be
configuration
forthe
CPICH
Suggestion:
for
scenario
quality
variation,
set small.
RSCP
(EUTRAN)
.
that handover is
expected
to
measurement
timeliness
triggered
quickly,
this this
If the value
is bigger,
Function:
events
parameternumber
should
be
setimpact
measurement
has of
less
required
to vice
be configured
for
small;
versa.
on
finaland
inter-frequency
a
certain purpose
of intermeasurement
results.
frequency
if the value is
Configuration
Rule:
measurement
purpose
has more impact.
The
parameter
setting is This
Adjustment
Suggestion:
based
on how
many
events to
parameter
is not
suggested
will
be used in inter-frequency
be adjusted.
handover.That is to say,
Event number is defined by
Adjustment Suggestion: not
suggest to adjust

handover area are
default value.
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed
default value.
When best cell is

changed

changed

When best cell is
changed
default value.
default value.
in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed
default value.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
Function: used to delay event

handover times
Function:
usedRule:
to indicate
Configuration
average
measurement
event
Configuration
success rate Rule: 3GPP
definition
For
2D, the bigger this
This
parameter
parameter
is, theindicates
easier is to
inter-frequency
events
trigger
this
event;
otherwise,
Function:
when
defined
in weight
protocol.
One array
the
smaller
this
parameter
evaluating
cell's to
quality
of is,
bit
corresponds
one
event.
the
harder
is
to
trigger
this
used frequency
Function:
used to delay event
event.
Configuration
Rule: cell's
reporting,
average
For
2F, handover
thedecrease
biggersuccess
this
quality,
handover
times
and
avoidis to
parameter
is, the harder
rate
error
handover
trigger
thisevaluates
event; otherwise,
When
UE
signal
Configuration
Rule:
average
the
smaller
this
parameter
quality,
if
the
parameter
is is,
handover
times,
handover
the
easier
is
to
trigger
this
smaller, the
influence
of event
best
Function:
used
to moving
delay
success
rate,
UE
event.
cell
of used
frequency
is
reporting,
decrease
average
speed
and
handover
area
When
event
is easier
to cells
be
bigger
andtimes
that
of
other
handover
and
avoid
The
bigger
this parameter
is,
triggered,
average
handover
are
smaller.
As a result,
error
handover.
the
less
possibility
is
to
trigger
times
and success
handover
success
handover
Configuration
Rule:rate
average
this
event.
Consequently,
rate
increase,
but
system
increase.
Otherwise,
if the
handover
times, handover
average
handover
times
resources
will
be consumed
parameter
is bigger,
the
success
rate,
UE
moving
decrease
and
the
risk
of callmore.
influence
best
used
speed
andofhandover
area.
drop increase.
Oncell
theof
other
frequency
is
smaller
and
The
bigger
this
parameter
is,
of
other
cells
are
bigger,
then
the
longer
is
to
trigger
the
error
handover
may occur.
event.
Consequently,
average
possibility
is to trigger
this
handover
times handover
decrease and
event, average
the
risk
of call-drop
increase.
times
increase
and may
result
On
the other
side, when this
in error
handover.
parameter
smaller,
Adjustmentbecomes
Suggestion:
for
This
parameter
indicates
average
handover
times
the scenario that handover
Object
of Inter-frequency
increase
and
may
in
area is ID
small
or
UEresult
moves
event
measurement
error
handover.
fast, this
parameter should be
configuration
unrelated
to
Suggestion:
the scenario
set small. for
traffic
category.
that handover is expected to
triggered
quickly,
thison the
This
parameter
indicates
Function:
L3 filtering
parameter
should
be set
measurement
results
small;
and
vice
versa.
period
measurement
Configuration Rule: signal
configuration
for CPICH
quality variation,
EcNo.
Function:
RLC
mode of the
measurement timeliness
measurement
report
Configuration
accurate
measurement Rule:
has less
impact
of
transmit,
and
system
on
final
inter-frequency
Function:
capacity
measurement Rule:
results.
Configuration
If
the value ifisthe
AM
RLC,isRNC
Otherwise,
value
measurement
purpose
can
request
UE
for
smaller,
this measurement
If
the parameter
value is set
retransmission
afterit receiving
has
more itimpact.
to
"True",
means
should
the
error
label (not This
Adjustment
Suggestion:
report
theSDU
measurement
continuous)
If the
value is to
parameter
is.on
not
suggested
result based
the
UM
RLC, the retransmission
be adjusted.
measurement
quantity
is
not required.Signalling
pathloss.
If the parameteris
more
important.
AM mode
value is set to "False",
it
can
provide
the
reliable
means it doesn't report the
transmission
signalling.
measurementofresult
based on
This
parameter
is
the measurement not
quantity
pathloss.
This
parameter
indicates
As
RNC
can
Function:
L3 calcuIate
filtering
on the
Object
IDby
of Cpich
Inter-frequency
Pathloss
RSCP,
measurement
results
period
measurement
(Pathloss=transmit
Configuration
Rule:powersignal
configuration
for
Cpich RSCP)
, if CPICH
Cpich RSCP
quality
variation,
RSCP.
is reported, thistimeliness
parameter
measurement
can
"False",
and ifthis
Cpich
If theset
value
is bigger,
RSCP is not reported,
measurement
has lessthe
impact
parameter
should set "True".
on
final inter-frequency
has more impact.
Adjustment Suggestion: This
parameter is not suggested to
be adjusted.

changed

When best cell is
changed
default value.
default value.
in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed
Basic parameter
Cann't Modify
Basic parameter
Cann't Modify

value.
When best cell is

changed
Accurate of transmit and

system capacity are
default value.
When best cell is

changed

default value.
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
measurement report
Configuration Rule: accurate
of
transmit, and system
Function:
capacity
Configuration Rule:
If
the value is AM
RLC, RNC
measurement
purpose
can
request
UE
for
If the parameter value is set
retransmission
afterit receiving
to "True", it means
should
the
error
SDU
label
(not
report the measurement
continuous)
If the
result based.on
thevalue is
UM RLC, the retransmission
measurement
quantity
is
not required.Signalling
pathloss.
If the parameteris
more
important.
AM mode
value is set to "False",
it
can
provide
the
reliable
means it doesn't report the
transmission
signalling.
measurementofresult
based on
This
parameter
is
the measurement not
quantity
pathloss.
As
can calcuIate
ThisRNC
parameter
indicates
Pathloss
RSCP,
Object IDby
of Cpich
Inter-rat
(Pathloss=transmit
powermeasurement profile
Cpich
RSCP)
,
if
Cpich
RSCP
configuration.
is
reported,
this
parameter
Function: scene parameter
can
set "False",
and if Cpich
Function:
Inter-Rat
RSCP
is
not
reported,
the
measurement
identity
Related
factor:profile
the actual
parameter
should
set
"True".
Related
factor:
the
actual
scene
scene
parameter is 1;
This
indicates
If theparameter
cell belongs
to subway/
Object
ID of Inter-rat
tunnel scene,
this parameter
measurement
configuration
is 3;
related to The
traffic
category.is
Function:
parameter
the service type index in interRAT measurement
configuration
network
condition.
Function:
L3 filtering
on the
This parameter
indicates
measurement
resultsevent
Object ID of Inter-rat
Configuration
signal
measurement Rule:
configuration
quality
variation,
for CPICH Ec/No (GSM) .
Function:
L3 filtering
on the
measurement
timeliness
measurement
results
This
value is the
experience
measurement
has
less impact
of
vendors and
onmany
final inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering ifresults
and is
Otherwise,
the value
reflects
the
measurement
results
in time.
has more
impact. of events
Function:
number
If
the
value
is
bigger,
thisThis
Adjustment
suggestion:
required to be
configured
for
measurement
has
less
impact
parameter
is
not
suggested
to
a certain purpose of inter-rat
on
inter-rat
be final
adjusted.
measurement
measurement
results.
Configuration Rule:
Otherwise,
if
the
value is
measurement purpose
smaller,
this
measurement
The parameter setting is
has
more
impact.
based
on how
many events
Adjustment
This
Function:
used
to indicate
will be used suggestion:
in inter-rat
parameter is not
to
measurement
event
handover.That
is suggested
to say,
be
adjusted.
Configuration
3GPPby
Event
numberRule:
is defined
definition
This
parameter
indicatesnot
Adjustment
Suggestion:
inter-rat
events
defined
in
suggest to adjust
protocol. One array bit
corresponds to one event.

system capacity are
default value.
When best cell is

changed

default value.
When best cell is

changed
Basic parameter
Cann't Modify

Immediately
planning.
the actual scene is

default value.
Immediately
Basic parameter
Cann't Modify

Can't Modify
planning.
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed
default value.
When best cell is

changed

changed
No
No
No
No
No
No
No
No
No
No
No
No
success rate
It is more difficult to trigger 3A
ifFor
thenot
parameter
smaller.
3B/3C/3Dis but
3A is
When
event
is
easier
adopted
in
inter-RAT
Function: weight whento be
triggered,
handover
handover,
the
parameter
evaluatingaverage
cell's
quality
ofis
times
and
handover
success
invalid
for
3B/3C/3D.
used frequency
rate increase,
but
system
Function:
usedRule:
to delay
event
Configuration
signal
resources
will be consumed
reporting,
decrease
average
quality, handover
success
more.
handover
times
rate
Adjustment
suggestion:
Configuration
Rule: average
When UE evaluates
signal
In
order
to
avoid
systemis
handover
times,
handover
quality, if the parameter
Function:
used
delay
capacity
loss
bytoactivating
success
rate
smaller, the
influence
of event
best
reporting,
decrease
average
compressed
mode,
It
is of
more
difficult
to when
trigger
cell
used
frequency
is 3C
handover
and
avoid
compressed
mode
for
interifbigger
the parameter
is other
large.
andtimes
that
of
cells
error
handover
RAT
measurement
is
Event
3B/3D
is
not
used
are smaller. As a result, in
Configuration
average
activated,
it is Rule:
expected
to
current
system,
so rate
the
handover
success
handover
times,
handover
to
2G
quickly.
Sois
parameter
value
of
3B/3D
increase.
Otherwise,
if the
Function:
usedis
to
delay
event
success
rate,
UE
moving
the
threshold
configured
to
invalid.
parameter
is bigger, average
the
reporting,
decrease
speed
and
handover
area
a
largerevent
value.
When
is easier
toused
be
influence
of
best
cell
of
handover
andhandover
avoid is,
The
biggertimes
parameter
triggered,
average
frequency
isthis
smaller
and that
error
handover.
the
less
possibility
issuccess
to trigger
times
and
handover
of
other
cells
are
bigger,
then
Configuration
Rule:
average
this
event.
Consequently,
rate
increase,
but
system
error
handover
may
occur.
handover
times,
average
handover
times
resources
will behandover
consumed
success
rate
and
decrease
and
the handover
risk of callmore.
area.
drop
increase.
On the other
Adjustment
suggestion:
The
bigger
this
parameter
side,
when
this
In order to avoidparameter
system is,
the
longer
is
to
trigger
the
becomes
smaller,
the more
capacity loss
by activating
event.
Consequently,
average
possibility
is to
trigger
this
compressed
mode,
when
handover
times
decrease
and
event,
average
handover
compressed
mode
for interthe
risk
of
call-drop
increase.
times
increase
and
may
result
RAT measurement is
On
the other
when to
this
in
error
handover
activated,
it isside,
expected
parameter
becomes
smaller,
Adjustment
Suggestion:
for
handover to 2G quickly. So
average
handover
times
Function:
L3 that
filtering
on theto
the
handover
This
parameter
the scenario
threshold
is indicates
configured
increase
and
may
result
in
measurement
results
area
is ID
small
or UE moves
Object
of Inter-rat
event
a smaller
value.
error
handover.
Configuration
Rule:
signal
fast,
this
parameter
should
measurement configurationbe
Suggestion:
for the
scenario
quality
variation,
set
small.
for CPICH
RSCP
(GSM)
.
Function:
L3 filtering
on theto
that handover
is
expected
measurement
timeliness
measurement
results
triggered
quickly,
this this
If the value
is bigger,
This
value
is
the
experience
parameter
should
setimpact
measurement has be
less
of
many
vendors
and
small;
vice versa.
on
finaland
inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering ifresults
and is
Otherwise,
the value
reflects
the
measurement
results
in time.
has more
impact. of events
Function:
number
If
the
value
is
bigger,
thisThis
Adjustment
suggestion:
required to be
configured
for
measurement
has
less
impact
parameter
is
not
suggested
to
on
inter-rat
be final
adjusted.
measurement
measurement
results.
Configuration Rule:
Otherwise,
if
the
measurement
Function:
usedpurpose
tovalue
delayisevent
smaller,
this
measurement
The parameter
setting
is
reporting,
decrease
average
has
more
impact.
based
on how
many events
handover
times
Adjustment
suggestion:
This
Function:
used
to indicate
will be used
inRule:
inter-rat
Configuration
average
parameter
is
not
suggested
measurement
event
handover.That
is
to
say,
handover times, handover to
be
adjusted.
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
It
is more difficult
to trigger 3A
This
indicates
Suggestion:
not
ifAdjustment
theparameter
parameter
is smaller.
inter-rat
events
defined
in
suggest
to
adjust
When
event
is
easier
to
be
Function:
weight
when
protocol.
One
array
bit
triggered,
average
handover
evaluating
cell's
quality
of
corresponds
to
one
times
and handover event.
success
used frequency
rate
increase, Rule:
but system
Configuration
signal
resources
will
be
quality, handover consumed
success
more.
rate
Adjustment
suggestion:
When UE evaluates
signal
In
order
to
avoid
systemis
capacity the
lossinfluence
by activating
smaller,
of best
compressed
mode, when
cell of used frequency
is
compressed
mode
for interbigger and that
of other
cells
RAT
measurement
is
are smaller.
As a result,
activated,
it is expected
handover success
rate to
handover
to
2G
quickly.
So
increase. Otherwise, if the
the threshold
is configured
to
parameter
is bigger,
the
a
larger value.
influence
of best cell of used
frequency is smaller and that

default value.
When best cell is

changed
Signal quality and handover

When best cell is

changed

default value.
When best cell is

changed

in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed
default value.
When best cell is

changed

changed

default value.
When best cell is

changed

When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No

Function:
used to delay event
success rate
reporting,
decrease
It is more difficult
to average
trigger 3C
handover
times
and
avoid
if the parameter is large.
error
Eventhandover
3B/3D is not used in
Configuration
Rule:
average
current system,
so the
handover
parametertimes,
value handover
of 3B/3D is
Function:
usedUE
to moving
delay event
success
invalid. rate,
reporting,
decrease
speed
and
handover
area
When event is easieraverage
to be
handover
times
and
avoid
The
bigger
this
parameter
is,
triggered, average handover
error
handover.
the
less
possibility
to trigger
times
and
handoverissuccess
Configuration
Rule:
average
this
Consequently,
rate event.
increase,
but system
handover
times,
handover
average
handover
times
resources
will be consumed
success
decrease
andand
the handover
risk of callmore. rate
area.
drop
increase.
On the other
Adjustment
suggestion:
The
bigger
this
parameter
side,
when
this
system is,
the
longer
is
to
trigger
the
becomes
smaller,
the more
capacity loss
by activating
event.
Consequently,
average
possibility
is to
trigger
this
compressed
mode,
when
handover
times
decrease
and
event,
average
handover
compressed
mode
for interthe
risk
of
call-drop
increase.
times
increase
and
may
result
RAT measurement is
On
the other
when to
this
in
error
handover
activated,
it isside,
expected
parameter
becomes
smaller,
Adjustment
Suggestion:
for
average
handover
times
Function:
L3 that
filtering
on theto
the
handover
This
parameter
the scenario
threshold
is indicates
configured
increase
and
may
result
in
measurement
results
area
is ID
small
or UE moves
Object
of Inter-rat
event
a smaller
value.
error
handover.
Configuration
Rule:
signal
fast,
this
parameter
should
Suggestion:
for the
scenario .
quality
variation,
set
small.
for CPICH
Ec/No
(EUTRAN)
Function:
L3 filtering
on theto
that handover
is
expected
measurement
timeliness
measurement
results
triggered
quickly,
this
This
value is
the
experience
parameter
should
be
setimpact
measurement
has
less
of
many
vendors
and
small;
vice versa.
on
finaland
inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering ifresults
and is
Otherwise,
the value
reflects
the
measurement
results
in time.
has more
impact. of events
Function:
number
If
the
value
is
bigger,
thisThis
Adjustment
suggestion:
required to be
configured
for
measurement
has
less
impact
parameter
is
not
suggested
to
on
inter-rat
be final
adjusted.
measurement
measurement
results.
Configuration Rule:
Otherwise,
if
the
measurement
Function:
usedpurpose
tovalue
delayisevent
smaller,
this
measurement
The parameter
setting
is
reporting,
decrease
average
has
more
impact.
based
on how
many events
handover
times
Adjustment
suggestion:
This
Function:
used
to indicate
will be used
inRule:
inter-rat
Configuration
average
parameter
is
not
suggested
measurement
event
handover.That
is
to
say,
be
adjusted.
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
It
is more difficult
to trigger 3A
This
parameter
indicates
Suggestion:
ifAdjustment
thenot
parameter
is but
smaller.
For
3B/3C/3D
3Anot
is
inter-rat
events
defined
in
suggest
to
adjust
When
event
is
easier
to
be
adopted
in
inter-RAT
Function:
weight
when
protocol.
One
array
bit is
triggered,
average
handover
handover,
the
parameter
evaluating
cell's
quality
of
corresponds
to
one
times
and
handover event.
success
invalid
for 3B/3C/3D.
used frequency
rate increase,
but
system
Function:
usedRule:
to delay
event
Configuration
signal
resources
will be consumed
reporting,
decrease
average
quality, handover
success
more.
handover
times
rate
Adjustment
suggestion:
Configuration
Rule: average
When UE evaluates
signal
In
order
to
avoid
systemis
handover
times,
handover
Function:
used
delay
capacity
loss
bytoactivating
success
rate
smaller, the
influence
of event
best
reporting,
decrease
average
compressed
mode,
when
It
is of
more
difficult
to trigger
cell
used
frequency
is 3C
handover
and
avoid
compressed
mode
for
interifbigger
the parameter
is other
large.
andtimes
that
of
cells
error
handover
RAT
measurement
is
Event
3B/3D
is
not
used
Configuration
average
activated,
it is Rule:
expected
to
current
system,
so rate
the
handover
success
handover
times,
handover
to
2G
quickly.
Sois
parameter
value
of
3B/3D
increase. Otherwise, if the
success
rate,
UEconfigured
moving
the threshold
is
to
invalid.
parameter
is bigger,
the
speed
and
area
a
largerevent
value.
When
is easier
toused
be
influence
ofhandover
best
cell of
The
biggeraverage
parameter
is,
triggered,
handover
frequency
isthis
smaller
and that
the
less
possibility
is
to
trigger
times
and
handover
success
this
Consequently,
rate
increase,
but
system
errorevent.
handover
may
occur.
average
handover
times
resources
will be consumed
decrease
and the risk of callmore.
drop
increase.
On the other
Adjustment suggestion:
side,
when
this
system
becomes
smaller,
the more
capacity loss
by activating
possibility
is to
trigger
this
compressed
mode,
when
event,
average
handover
compressed
mode
for intertimes
increase and is
may result
RAT measurement
in
error
handover
activated, it is expected to
Adjustment
for
handover toSuggestion:
2G quickly. So

default value.
in default value.
handover area are
default value.
When best cell is

changed
When best cell is

changed
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed
default value.
When best cell is

changed

changed

default value.
When best cell is

changed

When best cell is

changed

default value.
When best cell is

changed

When best cell is
changed
in default value.
No
No
No
No
No
No
No
No
No
No
No
No
Configuration Rule: average

success rate and handover
area.
the longer is to trigger the
event. Consequently, average
handover times decrease and
the risk of call-drop increase.
On the other side, when this
parameter becomes smaller,
average
handover
times
Function:
L3 filtering
on the
This parameter
indicates
increase
and
may
result
in
measurement
results
Object ID of Inter-rat event
error
handover.
Configuration
Rule:
signal
Suggestion:
for the
scenario .
quality
variation,
for CPICH
RSCP
(EUTRAN)
Function:
L3 filtering
on theto
that handover
is
expected
measurement
timeliness
measurement
results
triggered
quickly,
this
This
value is
the
experience
parameter
should
be
setimpact
measurement
has
less
of
many
vendors
and
small;
vice versa.
on
finaland
inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering ifresults
and is
Otherwise,
the value
reflects
the
measurement
results
in time.
has more
impact. of events
Function:
number
If
the
value
is
bigger,
thisThis
Adjustment
suggestion:
required
to be
configured
for
measurement
has
less
impact
parameter
is
not
suggested
to
on
inter-rat
be final
adjusted.
measurement
measurement
results.
Configuration Rule:
Otherwise,
if
the
measurement
Function:
usedpurpose
tovalue
delayisevent
smaller,
this
measurement
The parameter
setting
is
reporting,
decrease
average
has
more
impact.
based
on how
many events
handover
times
Adjustment
suggestion:
This
Function:
used
to indicate
will be used
inRule:
inter-rat
Configuration
average
parameter
is
not
suggested
measurement
event
handover.That
is
to
say,
be
adjusted.
Configuration
3GPPby
Event
number
is defined
success
rate Rule:
definition
measurement
purpose.
It
is more difficult
to trigger 3A
This
parameter
indicates
Suggestion:
ifAdjustment
thenot
parameter
is but
smaller.
For
3B/3C/3D
3Anot
is
inter-rat
events
defined
in
suggest
to
adjust
When
event
is
easier
to
be
adopted
in
inter-RAT
Function:
weight
when
protocol.
One
array
bit is
triggered,
average
handover
handover,
the
parameter
evaluating
cell's
quality
of
corresponds
to
one
times
and
handover event.
success
invalid
for 3B/3C/3D.
used frequency
rate increase,
but
system
Function:
usedRule:
to delay
event
Configuration
signal
resources
will be consumed
reporting,
decrease
average
quality, handover
success
more.
handover
times
rate
Adjustment
suggestion:
Configuration
Rule: average
When UE evaluates
signal
In
order
to
avoid
systemis
handover
times,
handover
Function:
used
delay
capacity
loss
bytoactivating
success
rate
smaller, the
influence
of event
best
reporting,
decrease
average
compressed
mode,
when
It
is of
more
difficult
to trigger
cell
used
frequency
is 3C
handover
and
avoid
compressed
mode
for
interifbigger
the parameter
is other
large.
andtimes
that
of
cells
error
handover
RAT
measurement
is
Event
3B/3D
is
not
used
Configuration
average
activated,
it is Rule:
expected
to
current
system,
so rate
the
handover
success
handover
times,
handover
to
2G
quickly.
Sois
parameter
value
of
3B/3D
increase.
Otherwise,
if the
Function:
usedis
to
delay
event
success
rate,
UE
moving
the threshold
configured
to
invalid.
parameter
is
bigger,
the
reporting,
decrease
average
speed
and
handover
area
a
largerevent
value.
When
is easier
toused
be
influence
of
best
cell
of
handover
andhandover
avoid is,
The
biggertimes
parameter
triggered,
average
frequency
isthis
smaller
and that
error
handover.
the
less
possibility
issuccess
to trigger
times
and
handover
of
other
cells
are
bigger,
then
Configuration
Rule:
average
this
event.
Consequently,
rate
increase,
but
system
error
handover
may
occur.
handover
times,
average
handover
times
resources
will behandover
consumed
success
rate
and
decrease
and
the handover
risk of callmore.
area.
drop
increase.
On the other
Adjustment
suggestion:
The
bigger
this
parameter
side,
when
this
system is,
the
longer
is
to
trigger
the
becomes
smaller,
the more
capacity loss
by activating
event.
Consequently,
average
possibility
is to
trigger
this
compressed
mode,
when
handover
times
decrease
and
event,
average
handover
compressed
mode
for interthe
risk
of
call-drop
increase.
times
increase
and
may
result
RAT measurement is
On
the other
when to
this
in
error
handover
activated,
it isside,
expected
parameter
becomes
smaller,
Adjustment
Suggestion:
for
average
handover
times to
the
that
handover
This
parameter
the scenario
threshold
is indicates
configured
increase
and
may
result
in
area
is ID
small
or UE moves
Object
of Inter-rat
event
a smaller
value.
error
handover.
fast,
this
parameter
should
Suggestion:
thecategory.
scenario
set
small. to for
unrelated
traffic
that handover is expected to
triggered quickly, this
small; and vice versa.

handover area are
default value.
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed
default value.
When best cell is

changed

changed

default value.
When best cell is

changed

When best cell is

changed

default value.
When best cell is

changed

in default value.
handover area are
default value.
Basic parameter
When best cell is

changed
When best cell is

changed
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
No
Function:
L3 filtering
on the
This parameter
indicates
measurement
resultsperiod
Object ID of Inter-rat
Configuration
signal
measurement Rule:
configuration
quality
variation,
for CPICH EcNo.
Function:
L3 filtering
on the
measurement
timeliness
measurement
results
This
value is the
experience
measurement
has
less impact
of
vendors and
onmany
final inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering
and
Otherwise,
the value
Function:
L3ifresults
filtering
onisthe
reflects
the
measurement
measurement
results
results
in time.
has more
impact.
This
value
is the experience
If
the
value
is
bigger,
Adjustment
suggestion:
of
many vendors
and thisThis
measurement
has
less impact
parameter
is
not
suggested
to
operators. It can guarantees
on
inter-rat
be final
adjusted.
the
filtering
results and
measurement
results.
reflects
the measurement
Invalid
parameter
Otherwise,
if
the
value is
results
in time.
Function:
report
amounts in
smaller,
this
measurement
If
the valuereporting
is bigger, this
periodical
has
more impact.
measurement
has less
impact
Configuration
Rule:
handover
Adjustment
suggestion:
This
on final inter-rat
success
rate
parameter is not
suggested to
measurement
results.
The
parameter is bigger, the
be
adjusted.
Otherwise,
if the value
is
Invalid
result isparameter
handover
judgment
is
smaller,
this
measurement
Function:
Report
interval
in
more precise and handover
has
morerate
impact.
periodical
reporting
success
increase, but
Adjustment
suggestion:
This
Configuration
Rule:
handover
system resource
is consumed
parameter
is not suggested
to
success
rate
more.Otherwise,
The
be
adjusted.
If
this
parameter
is bigger,
parameter
is smaller,
the
report
slower,are
possibility
events'isreports
less, theof
call-drop
and and
risk of callincreases,
drop increase
handover
success
rate
then handover success falls
rate
down.
Otherwise, this
may decrease.
parameter is smaller, report is
Function:
L3 filtering
on the
This
parameter
indicates
frequent
and
handover
measurement
resultsperiod
Object
of Inter-rat
successIDrate
increases,
but
Configuration
Rule:
signal
measurement
configuration
more system resources
are
quality
variation,
for
CPICH
RSCP.
taken
up.
Function:
L3 filtering
on the
measurement
timeliness
measurement
results
This
value is the
experience
measurement
has
less impact
of
vendors and
onmany
final inter-rat
operators.
It can
guarantees
measurement
results.
the
filtering
and
Otherwise,
the value
Function:
L3ifresults
filtering
onisthe
reflects
the
measurement
measurement
results
results
in time.
has more
impact.
This
value
is the experience
If
the
value
is
bigger,
Adjustment
suggestion:
of many vendors
and thisThis
measurement
has
less impact
parameter
is
not
suggested
to
operators. It can guarantees
on
inter-rat
be final
adjusted.
the
filtering
results and
measurement
results.
reflects
the measurement
Invalid
parameter
Otherwise,
if
the
value is
results
in time.
Function:
report
amounts in
smaller,
this
measurement
If
the valuereporting
is bigger, this
periodical
has
more impact.
measurement
has less
impact
Configuration
Rule:
handover
Adjustment
suggestion:
This
on final inter-rat
success
rate
parameter is not
suggested to
measurement
results.
The
parameter is bigger, the
be
adjusted.
Otherwise,
if the value
is
Invalid
result isparameter
handover
judgment
is
smaller,
this
measurement
Function:
Report
interval
in
more precise and handover
has
morerate
impact.
periodical
reporting
success
increase, but
Adjustment
suggestion:
This
Configuration
Rule:
handover
system resource
is consumed
parameter
is not suggested
to
success
rate
more.Otherwise,
The
be
adjusted.
If
this
parameter
is bigger,
parameter
is smaller,
the
report
slower,are
possibility
events'isreports
less, theof
call-drop
increases,
and and
risk of call drop increase
handover
success
rate
then handover success falls
rate
down.
Otherwise, this
may decrease.
parameter is smaller, report is
frequent and handover
success rate increases, but
more system resources are
taken up.
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed

value.
When best cell is

changed

default value.
When best cell is

changed

default value.
When best cell is

changed
Basic parameter
Cann't Modify

value.
When best cell is

changed

value.
When best cell is

changed

value.
When best cell is

changed

default value.
When best cell is

changed

default value.
When best cell is

changed
No

NodeB Common
ID
N/A
can not be
modified
No

Profile Id
N/A
can not be
modified
N/A
can not be
modified
N/A
can not be
modified
notes for parameter

configuration
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
This function
parameter
indicates the
The
of this
Initial Load Scene
parameter:
this parameter
indicates the measurement
type and report method etc.
of
theparameter
configuration
This
indicates the
parameters
for the common
NodeB Common
measurement
configuration
The
function
of
thiscommon
index,
decided
by
Object ID
parameter:
this
parameter
measurement purpose
(value
indicates
the
common
is single for a certain
measurement
type,
measurement object
purpose)
decided
by common
The involved
factor for setting
measurement
this parameter:purpose
common(value
is
single
for aofcertain
measurement
purpose
The
function
this
measurement
purpose)
Influence ofthis
this
parameter: is
parameter:
parameter
The
involved
factor
for setting
not adjustable
indicates
the common
this
parameter:
Suggestion
for
setting
this
measurement type, decided
Influence
of
this
parameter:
parameter:
this
parameter
is
by common
measurement
The
function
of this
common
measurement
decided
by
common
purpose
(value
is
single
for
parameter:
this parameter a
purpose
measurement
purpose
(value
certain
measurement
indicates
thefor
L3
filter this
Suggestion
setting
is
single
for
a
certain
purpose)
coefficient
parameter:
this
parameter
is
measurement
purpose)
, and
The
involved
factor
for
The
involved
factor
for setting
setting
decided
by
common
is
not
adjustable
this
parameter:
common
The
function of this
this
parameter:
the
measurement
purpose
(value
measurement
purpose
parameter:
this
parameter
smoothness
and
Real-time of
is
single
for
a
certain
Suggestion
for
setting
this
indicates
the common report
common
measurement
measurement
, and
The
functionthis
ofpurpose)
this
parameter:
parameter
is
measurement
type
(period
value
is
not
adjustable
parameter:
this
parameter
decided
by
common
report
or
On
demand
report)
indicates
of for
common
measurement
purpose
(value
The
involved
factor
setting
the less
ofthe
theunit
value,
the
less
measurement
report
period
is
single
for
a
certain
this
parameter:
measurement
fluctuate of the common
(milliseconds
minutes)
,
measurementor
purpose)
, and
purpose.
measurement
report
value;
decide
the
common
is
not
adjustable
Influence
of
parameter:
the
larger
of this
the
value,
the
The
function
ofreport
this
measurement
interval
this
parameter
is
decided
by
more
real-time
of
the
parameter:
this parameter
for
periodmeasurement
report
with report
common
common
measurement
indicates
the
parameter
of common
RptPrd.
purpose
(value
is single for a
value
measurement
reportfor
period,
The
involved
factor
setting
certain
measurement
Suggestion
for setting this
decide
the
common
this
parameter:
UE
The
functionnot
of suggest
this
purpose)
parameter:
to
measurement
interval
positioning
common
parameter:
this
parameter
Suggestion
forreport
setting
this
adjust
for
periodthe
report
withthreshold
measurement
Accuracy
indicates
trigger
parameter:
this
parameter
is
parameter
of
RptPrdUnit
requirement;
Iub load
for
UTRAN
GPS
common
decided
by common
The
involved
factor
for setting
Influence
of this
parameter:
measurement
of
OnDemand
purpose
(value
this
parameter:
UE
the
larger
of
the
common
type
is single for a certain
positioning
common
measurement
report
interval
The
involved
factor
for
setting
measurement
purpose)
and
measurement
Accuracy
for
period
report,
the
this
parameter:
UE
not suggest to adjust larger of
requirement;
Iub load
Iub load; themethods,
less
of the
positioning
UE
Influence
of
this
parameter:
common measurement
report
positioning
measurement
the
larger
ofperiod
the common
interval
forrequirement
report, the
Accuracy
measurement
report
interval
more
real-time
ofparameter:
Influence
of this
for
period
the larger
measurement
the
less ofreport,
the report
value,
the of
Iub
load;
thefor
less
of thethis
Suggestion
setting
easier
to trigger
UTRAN
GPS
common
measurement
parameter:
not suggest report
to
common
measurement
of
interval
report,
theof
adjust for period
OnDemand
type; the
larger
more
real-time
of
the value, the more difficulty
measurement
report
to trigger UTRAN
GPS
Suggestion
for setting this
common
measurement
of
parameter:
suggest to
OnDemandnot
type.Accuracy
adjust
Class A is 20000 chip,
Accuracy Class B is 20 chip,
this parameter is decided by

common measurement
purpose (value is single for a
certain measurement
purpose) , and is not
adjustable
common measurement
certain measurement
adjustable
seasoned value
Next
measurement
control
Next
measurement
control
Next
measurement
control

common measurement
Next
measurement
certain measurement
control
adjustable
seasoned value
Next
measurement
control
seasoned value
Next
measurement
control
Set the value 1 chip. It is

make the corresponding
report not frequently, and the
Next
change of the GPS timing of
measurement
cell frame can be acquired in
control
time.this parameter is
depends on position precise
not suggest to adjust.
No
No
No
No
No
No
No
No
No
No
No
No
measurement report of
OnDemand type
this parameter: UE
positioning methods, UE
positioning
The functionmeasurement
of this
Accuracy requirement
parameter:
this parameter
Influence
of this
parameter:
indicates the
GPS
Accuracy
the
less
of
the
value,
the
Class
easier
to
trigger
UTRAN
GPS
common
measurement
report
this parameter: The
of
OnDemandaccuracy
type; theclass
larger
implemented
of the value,
the UE
more
depends
on the
difficulty
to trigger
UTRAN
positioning
methods
that are
GPS
common
measurement
supported.
report
of OnDemand
Suggestion
for settingtype
this
Suggestion
for setting
this is
parameter:
this
parameter
This
parameter
indicatestothe
parameter:
not
suggest
depends
on the UE
Id
of the dedicated
adjust
positioning
methods,
measurement
Profile.and not
suggest to adjust
NodeB Dedicated
ID
NodeB Dedicated
Measurement
Function: This Configuration
parameter
Object ID.the function,
indicates
purpose etc. of the dedicated
measurement parameters
indicated by the configuration
index.
Function:
ThisRule:
parameter
Configuration
According
indicates
the
type
of function
to
the
corresponding
dedicated
measurement
to be
of
the dedicated
indicates
how
filtering of the
executed
by Node
B. shall be
measurement.
measurement
values
Configuration
Rule: Dedicated
performed before
Function:
This
parameter
measurement
should be
measurement type
event
indicates
the
threshold
used
chose
according
to
the 1
usage
evaluation and reporting.
for
triggering
event
E,
F
for
of
the
dedicated
Configuration Rule:
SIR
Error measurement.
measurement.
Considering
the filtering effect
Configuration
Rule:of the
and
the timeliness
Function:
This
parameter
Considering
whether
measurement
report. it can
indicates
the
report
correctly
and
reflects
The
larger
thetimely
value,
the less
characteristics
of SIR
the
condition
when
Function:
This
parameter
influence
current
measurement
results,
which
cannot
converge
the
indicates
the power
offset
measurement
cantohave
onof
can
be
on
demand,
periodic
SIRtarget
because
of
the
DPCH
maximum
DLthe
the
final
result,
the
less
or
by triggering
all
kinds
of
deterioration
of
radio
power,
which
defines
which
value,
the
more
influence
events.
condition.
threshold
that shall trigger
current
measurement
can
Configuration
Rule:
according
The
less
of
the
absolute
value
event
A,
B
for
transmitted
have
on
the
final
result.
to
of the
the measurement
parameter,
thetype
moreand
carrier
power measurement.
event
of
dedicated
This
parameter
indicates
the
easier
forthe
event
E and F of
Configuration
Rule:
measurement.
downlink
rate
level
threshold,
SIRerror
to
report.
But
if
it
Considering the timelinessisof
In
based
PS triggers
DRBC,
tooD-TCP
small,
it willwhich
influence
the
the
A/B
event
the
thresholds
of as
D-TCP
normal
OLPC so
to
TCP
measurement,
and
measurement
event
A/Bofor
are
influencethe
service
quality
avoiding
ping-pong
the
based
on
the
rate
level
of
the
system
capability
A/B
event
in orderfinally.
to satisfy
service.
The
threshold
of
the
The
more
of
the
absolute
the requirement of the service
TCP
measurement
event
value
ofand
thesystem
parameter,
the
quality
capability.
relative
to the
maximum
more harder
for
eventisEused
and
When
the
parameter
transmit
powertocorresponding
F ofthe
SIRerror
report.
But if
for
threshold
of A event,
to
rate
level
have
it isthe
toosame
large,
it will
influence
the
more
of the
parameter,
the
same
value.
This
SIR convergence
the harder
for A event speed
to be
parameter
decides
when
radiothe
condition
recovers
triggered,
more the
harder
to
downlink
rate level.
SIR
hasservice
converges
trigger
rate to
SIRerror so asToo
to influence
downgrading.
large of the
service quality
or system
parameter
will guarantee
capability
finally.
good
service
quality but
system capability will be
influenced.
When the parameter is used
Set the value 1 chip. It is

make the corresponding
report not frequently, and the
change of the GPS timing of
cell frame can be acquired in
time.this parameter is
depends on position precise
not suggest to adjust.
this parameter is depends on
the UE positioning methods,
and not suggest to adjust
Next
measurement
control
Next
measurement
control
Basic index
Cann't Modify
Basic index
Cann't Modify
Basic index
Cann't Modify
According to the
Next
corresponding function of the measurement
dedicated measurement.
control
Dedicated measurement type
should be chose according to
the usage of the dedicated
measurement.
Consider the filtering effect
and the timeliness of the
measurement report. Default
is 2 means current
measurement and previous
measurement has the weight
of 50% separately.
According to the
measurement type and event
of the dedicated
measurement.
Considering whether it can
correctly and timely reflects
the condition when SIR
cannot converge to the
SIRtarget because of
deterioration of radio
condition.
Can be adjusted according to
the actual requirement.
Considering the timeliness of
the A/B event which triggers
TCP measurement, and
avoiding the ping-pong of the
A/B event in order to satisfy
the requirement of the
capability.
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
Next
measurement
control
No
No
No
No
No
NO
NO
No
No

condition.
The less of the absolute value
of the parameter, the harder
for event E and F of SIRerror
to report. But if it is too small,
when
SIR can converge
to
This parameter
is
the SIRtarget normally,
measurement
hysteresis
SIRtarget
keeps
fixedly so as
time /change
time.
influencing
service
or
Configuration Rule:quality
according
system
capability
finally.
to the measurement type and
The
of dedicated
the
absolute
Function:
This
parameter
eventmore
of the
value
of
the
parameter,
indicates
the
time
unit ofthe
measurement.
Function:
This
parameter
morelarger
easily
forreport
event E and
measurement
The
this
parameter
is,F
indicates
of
to
report.
Butofif the
it
transmitted
byfrequency
Node
B.
theSIRerror
more the
difficult
to trigger
measurement
report
is
too
large,
when
SIR
can
Configuration
measurement Rule:
event.According
transmitted
B.
converge
toby
theNode
SIRtarget
to
the measurement
period,
Configuration
Rule: keeps
According
normally,
SIRtarget
which
is determined
to
the so
contribution
to the
rising
astotothe
influence
according
contribution
system
load
and
the
service
qualityload
or system
to
the system
and the
timeliness
of
capability
timelinessfinally.
of the
the
measurement
measurement report.
report.
The larger the value, the
more contribution to the
system load but the less
timely of the measurement
This
parameter
indicates
report;
the smaller
the value,
External
ENodeB Function
the less contribution
to the
Object
ID.
system
load butThis
theparameter
more
Main
function:
timely of the
indicates
the measurement
eNodeB No. of
report.
the EUTRAN belongs to.
Influence factor: the value
should set by the Network
ENodeBType
include: type
0: of
indicates the eNodeB
macro
eNodeB;
1:
home
the
EUTRAN
to.
Main
function:belongs
This parameter
eNodeB
Influence the
factor:
theidentify
value
indicates
RNC
should
set
Network
indicator
ofby
thethe
EUTRAN
belongs to.
ENodeBType
include:
0:
Influence factor:
the value
macro
eNodeB;
1:
home
eNodeB
Planning&Optimization and
the protocol version of
SGSN.if SGSN don't
recognize eNodeBID of
Eutran CELL,
RNCID/LAC/RAC
should be
used
for Eutran
CELL.
External
EUTRAN
Cell FDD
otherwise,
Object ID. ignore this
parameter
Considering whether it can

correctly and timely reflects
the condition when SIR
condition.
Default value is decided
according to the
measurement type and event
of the dedicated
measurement.
indicates the time unit of
measurement report
transmitted by Node B.
Configuration Rule:
Next
measurement
control
Next
measurement
control
Next
measurement
control
According to the contribution

Next
to the system load and the
measurement
timeliness of the
control
measurement report.
Basic parameter
can not be
modified
N/A
Immediately

normal mode.
Immediately
SGSN can recognize

eNodeBID of Eutran CELL
Immediately
N/A
can not be
modified
N/A
Immediately
No

Network planned, and is
unique in a ENodeB
No
The number of PLMN shared

by CELL, 1 is set to this
N/A
parameter
No
Mobile Country Code
Cann't Modify

Immediately
network deployment.
No

configured based on network
New users
authorized area
network deployment.
No

New connection
authorized area
network deployment.
No
No
No
No
NO
No
No
No
No
No
Primary key can not be

modified. The parameter is
must be Network planned,
and is unique in a ENodeB
Function: frequency band of
EUTRAN cells
deployment.
Function: Downlink EUTRAN
Absolute Radio Frequency
Channel Number
scene
Function: Uplink EUTRAN
Channel Number
scene
indicates the TRACE AREA
identify indicator of the
EUTRAN belongs to.
Main
function:
This parameter
Function:
EUTRAN
indicates
the RNC
identify
Measurement
Bandwidth
indicator
of
the
EUTRAN
belongs
scene to.
should
set by the
Network
Main function:
This
parameter
and
indicates
the RNC identify
the
protocol
version
of
indicator
of the
EUTRAN
SGSN.if
SGSN don't
belongs to.
recognize
eNodeBID
of
Influence factor:
the value
Eutran
CELL,
should
setThe
by the
Networkis
Function:
parameter
RNCID/LAC/RAC
should
be
and
used
to
judge
the
downlink
used
for Eutran
CELL.
the
protocol
version
of
load
state of
Eutran
otherwise,
ignore
thiscells.
SGSN.if
SGSN
don't
Configuration
Rule:
inter-Rat
parameter
recognize
eNodeBID of
handover probability
Eutran
CELL, is smaller,
If
the parameter
Function:
The parameter
is
RNCID/LAC/RAC
should
be
Eutran
isjudge
thought
to
be load
used
to
the
uplink
used
for
Eutran
CELL.
overload
by
UTRAN
more
state
of Eutran
cells.
otherwise,
ignore
this
easily
in inter-RAT
handover,
Configuration
Rule:
inter-Rat
parameter
then
handover
to
Eutran
is
triggered
more
difficultly,
and
vice versa.
Eutran
is thought to be
Adjustment
Not
overload by Suggestion:
UTRAN more
suggest
to
modify
this
easily in inter-RAT handover,
parameter
then handover to Eutran is
triggered more difficultly, and
vice versa.
Adjustment Suggestion: Not
suggest to modify this
parameter
N/A
Can't Modify

New connection
network deployment.
the actual scene is

default value.
Immediately
the actual scene is

default value.
Immediately
None
Immediately
the actual scene is

default value.
Immediately
SGSN can recognize

Immediately
SGSN can recognize

Immediately
Inter-Rat handover
probability and load of Eutran
At next use
cell is taken into account in
default value.
Inter-Rat handover
probability and load of Eutran When best cell is
changed
default value.
No

Object ID.
N/A
can not be
modified
No

Network planned, and is
unique in a ENodeB
N/A
Immediately
No
The number of PLMN shared

by CELL, 1 is set to this
N/A
parameter
No
Mobile Country Code
No

New users
authorized area
network deployment.
No

New connection
authorized area
network deployment.
No
No
No
NO
No
No
Primary key can not be

modified. The parameter is
must be Network planned,
and is unique in a ENodeB
EUTRAN cells
deployment.
Function: Downlink EUTRAN
Channel Number
scene
indicates the TRACE AREA
identify indicator of the
EUTRAN belongs to.
Main
function:
This parameter
Function:
EUTRAN
indicates
the RNC
identify
Measurement
Bandwidth
indicator
of
the
EUTRAN
belongs
scene to.
SGSN.if SGSN don't
Eutran CELL,
RNCID/LAC/RAC should be
used for Eutran CELL.
otherwise, ignore this
parameter
Cann't Modify

Immediately
network deployment.
N/A
Can't Modify

New connection
network deployment.
the actual scene is

default value.
Immediately
None
Immediately
the actual scene is

default value.
Immediately
SGSN can recognize

Immediately
No
No
No
No
No
No
No
No
No
No
No
No

indicates the RNC identify
indicator of the EUTRAN
belongs to.
should
setThe
by the
Networkis
Function:
parameter
and
used
to judge the downlink
the
of
loadprotocol
state of version
Eutran cells.
SGSN.if
SGSN
don'tinter-Rat
Configuration
Rule:
recognize
eNodeBID
handover probability of
Eutran
CELL, is smaller,
If
the parameter
Function:
The parameter
is
RNCID/LAC/RAC
should
be
Eutrantoisjudge
thought
to
be load
used
the
uplink
used for Eutran
CELL.
overload
by
UTRAN
more
state
of Eutran
cells.
otherwise,
ignore
this
easily
in inter-RAT
handover,
Configuration
Rule:
inter-Rat
parameter
then
handover
to
Eutran
is
triggered
more
difficultly,
and
vice
versa.
Eutran is thought to be
Adjustment
Not
overload
by Suggestion:
UTRAN more
suggest
modify this
easily in to
inter-RAT
handover,
parameter
then handover to Eutran is
triggered more difficultly, and
vice
This versa.
parameter indicates
Adjustment
Suggestion:
External
RNC
Function Not
suggest
to modify this
Object ID.
parameter
Mobile Country Code

indicates
the adjacent
Mobile NetWork
Code RNC
identify.
SGSN.if SGSN don't
Eutran
CELL,
Function:
neighboring RNC '
RNCID/LAC/RAC
should be
sharing MCC.
used
for
Eutran
CELL.
otherwise,
parameter ignore
should this
be set
parameter
deployment.
Function: neighboring RNC '
sharing MNC.
deployment.
SRNC indicate the combine
This
parameter
indicates
method
of DRNC
Iur radio
reference
to
UIurLink
object.
Link
Factors of consideration: this
parameter
influenced
by
Function ofisthis
parameter:
the
combine
capability
and
configure combine method of
compatibility
of DRNC.
DRNC Iur radio
Link
When
it's
set
as 'may', thethe
better compatibility
can be
consumed
transmission
acquired.
resource and DRNC combine
When
it's set as 'must' or
compatibility.
'must
not',
The consumed
When this parameter
is set as
transmission
can be
combined, theresource
transmission
controlled
by
SRNC,
but
need
resource can be saved , but
the support
of DRNC
need
the support
of DRNC.
When this parameter is set as
not combined, the
transmission resource can not
be saved, but not need the
support of DRNC.
SGSN can recognize

Immediately
Inter-Rat handover
probability and load of Eutran
At next use
default value.
Inter-Rat handover
probability and load of Eutran When best cell is
changed
default value.
Basic parameter
can not be
modified

New connection
network deployment.

New connection
network deployment.
N/A
New connection

New connection
network deployment.

New connection
network deployment.
N/A
At next use
Next Radio Link

The default value is to ensure
Add Request
best compatibility
Over Iur
The default value is to save

transmission resource.
Next Radio Link

Add Request
Over Iur
No
No
No
No
No
N/A
No
No
No
No
No
No

External UTRAN Cell Object
Function
of this parameter:
ID.
configure cell-id of umts
neighbour cell
Factors of consideration: This
negotiated with the UMTS
neighbour cell, and
configured
according to
the
Function: neighboring
UTRAN
Cell-Id
of
the
neighbour
external cells' MCC.
UMTS
Cell Rule: This
Configuration
parameter
be set
Function ofshould
this parameter:
according MNC
to operator
network
configure
of umts
deployment.
neighbour cell
neighbour cell, and
configured
according
to the
Function: RNC
ID of the
MNC
of
the
neighbour
UMTS
neighboring cell
Cell
deployment.
N/A
can not be
modified
N/A
New users

New connection
network deployment.
N/A

New connection
network deployment.
According to the mode of the

N/A
system, choose FDD mode.
Function: Location area code
deployment.
Function: Routing area code
Function:
prioritynetwork
according HCS
to operator
Configuration
Rule:
deployment (value ofUE
DRNC's
mobility
cells) . speed
Function:
maximum
smaller, the
priority oftransmit
the
power
UTRAN cell is lower.
Configuration
Rule:touethe
UE will reselection
capability
(maximum
higher priority
cells intransmit
low
power)
mobility state and reselection
When
this priority
parameter
to the low
cellsisin high
smaller
than
actual
UE
mobility
state.
Function: the minimum
maximum
Tx
Power,
if the
required RX level
parameter is smaller,
Configuration
Rule: uplink
power
is smaller,
and
neighboring
RNC's
cellvice
versa.
coverage
area
Function:
ToSuggestion:
extend the In
Adjustment
If
the
parameter
is
minimum
value
ofvalue
QrxLevMin
general,
this reselection
parameter
will
smaller,
cell
(the
minimum
required RX
not
be
adjusted.
criterion will be fulfilled easily,
level)
and
vice versa.Rule: cell
Configuration
Adjustment
Suggestion: In
covering radius
general,
this
parameter
If the parameter
value iswill
not
be
adjusted.
bigger, inter-RAT handover
will be triggered easily, and
vice versa.
parameter would be set in
scenario with large cell
radius.
New users
N/A

New connection
network deployment.

New connection
network deployment.
HCS is not used in current

network.
When system
information is
changed
UE capability is taken into

New connection
When system
Cell coverage area is taken
information is
changed
When system
cell covering radius is taken
information is
changed
No
No
No
No
No
No
No
No
No
No
No
No

neighboring cell
according
to operator
network
Function: occupied
uplink
deployment.
carrier central frequency point
of the cell
according
to network
Function: downlink
carrier
deployment.
central frequency point of the
cell
deployment.Function: This
Parameter
This
parameter
indicates
the
parameter
indicates
PCPICH
Primary
Scrambling
Code
transmission power of the of
the
neighbouring
neighboring
cell. cell of
adjacent RNCRule: The
Configuration
parameter value is configured
Function:
the minimumpower
PCPICH transmission
required
quality
level
of the neighboring
cell.
Configuration
Rule:
neighboring
RNC's
cell
Configure this
parameter
reselection
level, cell
according todifficult
the actual
covering
PCPICH radius
transmission power
If
value
ofthe
theparameter
neighboring
cell.is
smaller,
cell
selection
criterion
If pcpichPwrPre is "False"
,
will
be
fulfilled
easily,
and
this parameter is invalid. vice
Function:
neighboring cells'
versa.
transmit
diversity
indicator
In
Configuration
Rule: Thiswill
general, this parameter
parameter
should be set
not be adjusted.
deployment.
Function: STTD indicator
according
to operator
network
Function: This
parameter
deployment.
indicates if the neighboring
cell of DRNC supports Closed
Loop Mode1.
be set according to if the
neighboring cell of DRNC
Parameter
function:
network
actually supports
Closed
planning
parameter.
iur
Loop Mode1.
interface parameter.
the MNC BCD code length of
the Iur neighbouring cells.
Function: Mobile country code
Function
parameter:
accordingoftothis
operator
network
configure
MNC of umts
deployment.
neighbour cell
neighbour cell, and
MNC of the neighbour UMTS
Cell

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.
Take effect after
the system
information is
updated
N/A
engineer based on the actual
requirement of coverage and Immediately
system capacity.
The P-CPICH power usually
is 33dBm when cell
maximum power is 43dBm.
When system
information is
changed

At next use
network deployment.

At next use
network deployment.
Default value is set to "Not
Support", which should be
actual supported diversity
mode of the neighboring cell
of DRNC.
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
At next use

New connection
network deployment.
N/A
New users
No
No
No
No
No
No

planning parameter. iur
the MNC BCD
code
length
Function:
Service
area
codeof
the
Iur neighbouring
cells.
for CS
and PS domain
according
network
Function oftothis
parameter:
deployment
of DRNC's
configure
the(value
URA info
of
cells)
.
neighbour
UMTS Cell
Function
this parameter:
parameterofneed
to be
configure
the
SANC
number
negotiated with
the GSM
of
neighbour
UMTS
Cell
neighbour cell, and
Factors
of consideration:
This
configured
according to the
parameter
to be
URA info ofneed
the neighbour
negotiated
with
GSM
neighbourofUMTS
Cell.
Function
this the
parameter:
neighbour
cell,SANC
and info of
configure the
configured
according
neighbour UMTS
Cellto the
SNAC
number
of
the
This
neighbour
neighbour
parameter need to beUMTS
Cell.
If network
is not
negotiated
with sharing
the GSM
used,
this parameter
neighbour
cell, and is set as
zero
SNAC
infoNeighboring
of the neighbour
Function:
cells'
neighbour
UMTS
HSPA capability Cell. If
network
sharing
is not
used,
Configuration
Rule:
This
this
parameter
don't need
parameter
is configured
byto
be
configured
neighboring cells' HSPA
capability
N/A
At next use

New connection
network deployment.
N/A
New users

New users
networks
N/A
New users
In general, HSPA capability

will be support.
When best cell is

changed
No
It should be set to
"Supported" if the external
N/A
neighbouring cell supports FDPCH.
Take effect for the

next call
No
It should be set to
neighbouring cell supports
Enhanced F-DPCH.
N/A
Take effect for the

next call
No
It should be set to
neighbouring cell supports.
N/A
Take effect for the

next call
N/A
Take effect for the

next call

actual DL 64QAM capability
of the neighboring cell of
DRNC.
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
New connection
or new radio link
No
No
Yes
It should be set to
MIMO and downlink 64QAM
Function:
This parameter
simultaneously.
cell of DRNC supports
64QAM.
Function:
This parameter
be set according
to if the
indicates
whether
neighboring
cell ofthe
DRNC
adjacent
cell supports
the
actually supports
64QAM.
uplink enhanced layer 2
function or not.
Related Factor: the
configuration of adjacent cell
for the support of uplink
enhanced layer 2 function.
No
Yes
No
No
No
No
No
No
neighboring cells of DRNC

support flexible MAC-d PDU
The
function of this
this
parameter:
the actual
The
function
of this
Parameter
Function:
This cell
parameter:
This
parameter
capability
of
the
cell
in
C- is
parameter:
This
parameter
parameter
indicates
whether
configured
with
the
Possible
RNC.
indicate
whether
Dual-Cell
PCPICH
transmission
Secondary
Cellpower
ID for
Influence
ofisServing
this
parameter:
HS-DSCH
supported
for
of
neighboring
cell
is
DC
cell;
This
parameter
is
This
parameter
the
neighbor
cellindicates
over
Iur.
configured.
invalid
for
non-DC
cell
whether
the neighboring
cells
The involved
involved
factor
for
setting
Configuration
Rule: for
It needs
The
factor
setting
of
DRNC
support
flexible
this
parameter:
DC
HSDPA
to
consider
whether
the
this
parameter:
theshould
actual
MAC-d
PDU,
and
be
capability
the
cell in C-RNC
pathloss
ofofneighboring
cell
HSDPA
support
capability
of
set
according
to
the
actual
Influence
of
this
parameter:
needs
toinbe
calculated
for
the
cell
C-RNC;
the
actual
cell
capability
ofor
the
cell in CThis
parameter
indicate
intra-frequency
intraSecondary
Serving
Cell ID of
RNC.
whether
HS-DSCH
frequency
measurement.
the
cell inDual-Cell
C-RNC;
Suggestion
for
setting
this
is the
supported
forof
the
neighbor
If
pathloss
neighboring
Influence
of
this
parameter:
parameter:
It
should
be
set
cell
over
Iur,
and
should
be for
needs
to beiscalculated
This
parameter
configured
according
to
the
actual
cell
set
according
to
the
ability
intra-frequency
orSecondary
inter- of
with
the Possible
capability
of
the cell
in Cthe
cell
in
C-RNC
frequency
measurement,
Serving
Cell ID for DC cell,
RNC.
Suggestion
for
setting
this
"Cell
info" IEbe
ofset
intraand should
according
parameter:
This
parameter
frequency
or
inter-frequency
to the actual Secondary
should be
setIDaccording
measurement
should
Serving
Cell
of the include
celltoin
the
ability
of the
cell in CPCPICH
transmission
C-RNC.
RNC
power
of thisfor
neighboring
Suggestion
setting thiscell,
and
this parameter
should be
parameter:
This parameter
"True".
If
the
pathloss
of neighboring
the
actual
Secondary
Serving
cell
needs
to be
Cell not
ID of
the cell
in C-RNC. If
calculated
for intra-frequency
the cell in C-RNC
support DC
or
HSDPA,
thisconfigured
parameterby 0.
It isintra-frequency
usually
measurement,
should be set to"Cell
the info" IE
of
intra-frequency
interSecondary ServingorCell
ID; If
frequency
measurement
shall
the cell in C-RNC does not
not
include
PCPICH
support
DC the
HSDPA,
this
transmission
power
of thisto
It
is configured
according
parameter
is invalid.
neighboring
cell, and this
cell condition.
parameter should be "False".
Adjustment Suggestion: At
present, the pathloss of
neighboring
cellaccording
not need to
to
It is configured
be
calculated
for
intracell condition.
frequency or intra-frequency
measurement, so this
parameter not needs to be
adjusted.
current SW version
the default value is "0:

closed" and should be set
according to operator's
requirement.
Immediately
it's set according to the cell

DC capability
Immediately
network planning parameter,

The
defaultvalue
value(secondary
is
no default
configured
cell Identityby
forthe
DCnetwork
cell)
engineer based on the
situation.
At present, the pathloss of
neighboring cell not need to
be calculated for intrafrequency or intra-frequency
Configure
according
measurement,
so the default
anteType
default
Value.If
value of this
parameter
is
auctorial
"False". cell is set beam
antenna, the parameter is
configured 1.
when inter-RNC
handover happen
Immediately
At next
positioning
transaction
N/A
at next use
N/A
at next use
N/A
at next use
No
cell condition.
N/A
At next use
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
configuration according the

actual location information of
the cell.
N/A
at next use
No
cell condition.The Larger the
value is, the confidence the
result is.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No

the cell.
N/A
at next use
No
cell condition.
because most cell is set

Omni Antenna, so this
parameter is default
configured 0.If auctorial cell
is set beam antenna, the
parameter is configured 1.
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
No
No
No
No
No
No
No
No
No
No
No
cell condition.
Function:
Switch of CS 64
cell condition.
kbps
Establishment
It is related
with the in
external
UTRAN
cell.and is
positioning function,
Configuration
Rule:
The video
used in Cell ID/Cell ID+RTT
service
of
CS
64
kbps
occupy
survey, the measurement
many
resources,
result is
returned ittocan
CN.control
It is
the
access according
of video service
configured
to cell by
the
switch. To wider
turn onthe
the
condition.The
function,
video
service
is
interior corner is, the larger
allowed
to
access,
and
the
cell coverage is.
Function:
To extend
the but it
user experience
is good,
minimum
value radio
of QrxLevMin
occupies many
(the
minimum
required
RX
resources.
level)
To turn off the function, video
Configuration
Rule: cell
service is not allowed
to
covering
access. radius
If
the
parameter
is "True",
If
theset
operator
doesn't
hope
It
is
to be "Support
Qrxlevmin=Qrxlevmin
+HS-for
the
video
services'
access
DSCH
Congestion Detection"
DeltaQrxlevmin.
some
special scene,
in
the
following
cases:for This
Adjustment
Suggestion:
example,
bathroom,
the
1:
The exterior
cellbesupports
parameter
would
set in off.
function
should
be
turned
the
HS-DSCH
congestion
This
parameter
is not
in
scenario
with
large
cellused
It
is
set
to
be
"Support
E-DCH
control
function.
current SW version
radius.
Congestion
Detection"
2: The parameter
of in the
following
cases:
ATimeDelay is configured a
1:
The exterior
cellmatching
supports
appropriate
value
the
E-DCH
congestion
control
the transmission environment,
function.
or HS-DSCH service rate may
2:
parameter
beThe
dropped
more. of
ATimeDelayJitter
is
If A congestion control
configured
a
appropriate
function is configured to be
value
matching
the of a Iur
"Support",
the speed
transmission
or
service over aenvironment,
related bearer
E-DCH
service
rate maymay
be
type such
as HS-DSCH
dropped
more.
try to be adjusted
according
Function:
The parameter
If
congestion
control
toAthe
transmission
indicates
whether
E-DCH
function
to
be
environment
between by
SRNC
2ms
TTI is
is configured
supported
the
"Support",
the
speed
of
a
and the related
neighboring
cellNodeB.
of DRNC.Iur
service
over a Rule:
related
bearer
Configuration
It should
type
such
as
E-DCH
may
try
be set according
to the actual
Function:
The parameter
to be adjusted
according
to
E-DCH
TTI
capability
of
the
indicates
the E-DCH
SF
the
transmission
environment
neighboring
cell
of
the DRNC.
capability
of
the
neighboring
between SRNC and the
cell
of DRNC.
related
NodeB.
Function:
The parameter
be set according
to the actual
indicates
E-DCH HARQ
E-DCH SFthe
capability
of the
combining
ofDRNC.
the
neighboringcapability
cell of the
neighboring cell of DRNC.
be
set according
to the actual
Function:
The parameter
HARQ
combining
indicates the Max capability
UE DTX of
the
neighboring
cell
of the
Cycle capability of the
DRNC.
neighboring
cell of DRNC.
be set according to the actual
Max UE DTX Cycle capability
of the neighboring cell of the
DRNC.
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction

At next use
is to try best to provide better
user experience.
When system
information is
changed
N/A
at next use
The feature of most External

UTRAN Cells is not stable,
New Session
so it is configured to "not
support".
The feature of most External
UTRAN Cells is not stable,
so it is configured to "not
support".
Default value is set to
"Supported", which should be
actual E-DCH TTI capability
DRNC.
Default value is set to "2SF2
and 2SF4", which should be
actual E-DCH SF capability
Default
DRNC. value is set to "IR
and Chase Combining
Capable", which should be
actual E-DCH HARQ
combining capability of the
Default
valuecell
is set
to "160
neighboring
of DRNC.
subframes", which should be
actual Max UE DTX Cycle
capability of the neighboring
cell of DRNC.
New Session
At next judgment
(i.e., shall not
affect ongoing
connections)
At next judgment
(i.e., shall not
affect ongoing
connections)
At next judgment
(i.e., shall not
affect ongoing
connections)
At next judgment
(i.e., shall not
affect ongoing
connections)
No
No
No
No
No
No
No
No
No
No
No
No

cell of DRNC supports CPC
DTX-DRX.
be
set according
to if the
Function:
This parameter
neighboring
cell
of
DRNC
actually
supports
CPC
cell of DRNC supports DTXHSDRX.
SCCH less.
Function:
the minimum
Configuration
Rule:
required quality
levelIt should
be
set
according
to
if the
The
parameter
is
configured
Configuration Rule:
neighboring
cell
of
DRNC
according
to
the
transmission
neighboring RNC's cell
actually
supports
delay
from
SRNC
tolevel,
NodeB,
reselection
difficultHS-SCCH
cell
less.
including:
covering radius
1:
Theparameter
value
is
configured
Function:
the20
minimum
If the
value
is
ifrequired
the transmission
RX selection
level
smaller,
cell
criterion
environment
about and
LEOvice
Configuration
will be fulfilledisRule:
easily,
(Low
Earth
Orbit)
or
the
neighboring
RNC's
cell
versa.
transmission
delay is notIn
coverage
area
Adjustment
Suggestion:
Function:
To
extend
more
than
20ms
. theiswill
If
the
parameter
value
general, this parameter
minimum
value
of
2:
value
100 isQrxLevMin
smaller,
cell reselection
notThe
be adjusted.
The
protocol
parameter
(the
minimum
required
RX
configured
if
the
transmission
criterion will be
fulfilled
easily,
TOAWS
configured
level)
environment
is about MEO
and vice is
versa.
according
toSuggestion:
the
OMCR
Configuration
Rule:
cell
(Medium
Earth
Orbit)
or the
Adjustment
In
Function:
To
extend
theand
parameters
of
TOAWS
covering
radius
transmission
general, this
parameter
will
minimum
value
ofis QrxLevMin
jitter.
function
of
the
If
the
parameter
"True",
delay
between
SRNC
and
not
beThe
adjusted.
(the
minimum
required
protocolparameter
TOAWS
Qrxlevmin=Qrxlevmin
+RX
NodeB
is between
20ms
andis
level)
to
control
DeltaQrxlevmin.
100ms
. the earliest
Configuration
Rule:
cellof
acceptable
arrival
time
a
Adjustment
Suggestion:
3:
The maximum
value
isThis
covering
radius
FACH
DATA
FP
in
a
parameter would
be NodeB.
set in
configured
if the transmission
If
theparameter
parameter
is
The
ofvalue
jitter
is
scenario
withislarge
cell
environment
about
GEO
smaller,
inter-RAT
handover
configured
according
to
the or
radius.
(Geostationary Earth Orbit)
Function:
Maximum
Bit
Rate
will be
triggered
easily,
and
transport
delay
jitter
from
a
the
transmission
delay
on
DL
for NRT
PS
RAB
vice
versa.
RNC
toDCH
aSRNC
related
NodeB
in is
between
and
NodeB
in
External
UTRAN
Adjustment
Suggestion:
which
the external
more
than
100ms
. Cell. This
Configuration
Rule:
Itset
needs
parameter
would
be
in
neighboring
cell
of
the
SRNC
If the value of the parameter
to
consider
the
transmission
scenario
with
large
cell
is
configured.
is too small, the maximum bit
bandwidth
ofofIub,
the
user
radius.
If
theofvalue
themay
OMCR
Function:
Maximum
Bit
Rate
rate
a service
be
not
experience
and
the
parameters
of
on
DCHthe
forTOAWS
NRT PSand
RAB
be UL
fulfilled,
HS-DSCH/Esuccessful
call
ratio.
jitter
iscongestion
too small,
NodeB
in
External
UTRAN
Cell. can
DCH
detection
The
reason
of
the
adding
of
not
response
Timing
Configuration
It needs
action
may beaRule:
triggered
more
this
parameter
is
used
for
Adjustment
Control
Frame
to
to
consider
thequality
transmission
easily
and the
of the
scene
of
very
limited
RNC
in
time
,
the
probability
bandwidth
of
Iub,
the
user
service with
HS-DSCH/EFunction:
Maximum
Bit Rate
transmission
bandwidth
of Iub
that
some
DCH
data
toRAB
DRNS
experience
and
the
DCH
would
be
dropped.
on
DL
DCH
for
RT
PS
in
to
avoid
many
users'
bad
user
can
be
sent
on
uu
successful
call
ratio.
If
thenot
value
of the
parameter
External
UTRAN
Cell.
experiences
because
of
interface
would
be
increased
The
of
the
adding
is
tooreason
large,
the
buffer
of some
aof
Configuration
Rule:
It the
needs
user's
high
bit
rate
in
and
the
quality
of
service
with
this
parameter
is
used
for
the
SRNC
and
UE
may
be
to
consider
the transmission
same
cell.
IUR
DCH
channel
would
be
scene
very
limited
appliedoftoo
high,
the
HSbandwidth
of
Iub,
the
user
Function:
Bit Rate
The
valueMaximum
of this
parameter
is
dropped.
transmission
bandwidth
of Iub
DSCH/E-DCH
congestion
experience
and
the
on
UL
DCH
for
RT
PS
RAB
in
larger,
the
rate
to
be
allowed
If
the
value
of
the
parameter
to
avoid
many
users'
bad
user
detection action
may be
successful
callthe
ratio.
External
UTRAN
Cell.
is
higher,
and
user
is
tooreason
large,
The
DRNS
experiences
because
of some
triggered
less
easily
and
the
The
of
the
adding
of
Configuration
Rule:
It the
needs
experience
is
also
better,
but
NodeB
would
store
more
user's
high
bit
rate
in
quality
of
service
with
HSthis
parameter
is
used
for
the
to
the
transmission
itsame
isconsider
also
easier
toand
influence
DCH
DATA
FPs
the
cell.
DSCH/E-DCH
would
be delay
scene
of
very
limited
bandwidth
of
Iub,
the
user
other
users'
quality.
of
service
with
IUR
DCHof Iub
The
value
oftraffic
this
parameter
is
dropped.
transmission
bandwidth
experience
and
the
The
value
of
this
parameter
is
channel
would
be
increased
larger,
the
rate
to
be
allowed
If the
value
of the
parameter
to
avoid
many
users'
bad
user
successful
call
ratio.
smaller,
the
rate
touser
be
allowed
more.
higher,
and
the
is
configured
falsely
in
experiences
because
of some
The
reason
of
thesuccessful
adding
of
is
lower,
and
the
The
protocol
parameter
experience
is
also
better,
but
respective
NodeB,
thethe
action
user's
high
bit
rate
in
this
parameter
is
used
for
the
call
ratio
is
also
higher,
but
is configured
itTOAWS
isa also
easier
to influence
of
soft/hard
handover
would
same
cell.
scene
of
very
limited
the
user
experience
is
also
according
to
adjusting
the
other
users'
quality.
be
processed
falsely
and theis
The
value
oftraffic
this
parameter
transmission
bandwidth
of Iub
worse.
value
ofthe
parameter
of
The
value
of
this
parameter
is
quality
ofthe
service
would
bejitter
larger,
rate
to
be
allowed
to
avoid
many
users'
bad
user
because
the
RNC's
process
smaller,
the
rate
touser
be
allowed
dropped.
is
higher,
and
the
experiences
because
of some
faculty
more
steady.
is
lower,isand
successful
experience
isthe
also
better,
but
user's
high
bit
rate
in
the
call
ratio easier
is also to
higher,
but
itsame
is also
influence
cell.
the
user
experience
is also
other
users'
quality.
The
value
oftraffic
this parameter
is
worse.
The value
this
larger,
the of
rate
to parameter
be allowedis
smaller,
rate
be allowed
is higher,the
and
thetouser
is
lower,
and
the
successful
experience is also better, but
call
ratio easier
is also to
higher,
but
it is also
influence
the
user
experience
is
also
other users' traffic quality.
worse.
Default value is set to

"Support", which should be
actual CPC DTX-DRX
cell
of DRNC.
Default
value is set to
actual CPC DTX-DRX
cell of DRNC.
At next judgment
(i.e., shall not
affect ongoing
connections)
At next judgment
(i.e., shall not
affect ongoing
connections)
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
delay from a SRNC to a
New Session
usually be used.
delay jitter from a RNC to a
related NodeB in which the
external neighboring cell of
the SRNC is configured.
New Session

At next use
try best to provide better user
experience.
At next use
experience.
At next use
experience.
At next use
experience.
No
No
Yes
No
No
successful
call ratio.
External UTRAN
Cell.
The
reason
of Rule:
the adding
of
Configuration
It needs
this
parameter
is
used
for
the
to consider the transmission
scene
of
very
limited
bandwidth of Iub, the user
transmission
bandwidth
of Iub
experience
the
Function
of and
thisusers'
parameter:
it
to
avoid
many
bad
user
successful
call ratio.
indicates
whether
activating
experiences
because
of some
The
reason
of
the adding
Dual
Cell
and
MIMO
at
theof
user's
high
bit
rate
in
the
this
parameter
is
used
for
the
same
time in the DRNC cell.
same
scene cell.
ofofvery
limited
Factors
consideration:
the
The value of this
parameter
is
transmission
bandwidth
of Iub
network
layout,
the
larger,
the
rate users'
to
beHSDPA
allowed
to
avoid
many
bad
user
throughput
of UE
is
higher, and
the userof some
experiences
because
When
the
parameter
is set to
experience
is
also
better,
user's
highDRNC
bit ratecell
in the but
"support",
itsame
is also
easier to influence
cell.
supports
thetraffic
function
of
other
users'
quality.
The value Dual
of this
parameter
is
activating
Cell
and
The value
of
this
is
larger,
thethe
rate
to parameter
betime
allowed
MIMO
at
same
in
the
smaller,
the
rate
touser
be allowed
is
higher,
and
the
radio
linkand
setup
orsuccessful
is
lower,
experience
isthe
also
reconfiguration,
thisbetter,
willbutbut
call
ratio easier
is also to
higher,
itincrease
is also
influence
the HSDPAis also
the
user
experience
other
users'
quality.
throughput
oftraffic
UE, otherwise,
worse.
The does
valuenot
of this
parameter
is
cell
support
the
smaller,
function.the rate to be allowed
is
lower, and the
successful
MimoSuptInd
indicates
the
call
ratio
is
also
higher,
reserved
parameter
DRNC cell supports thebut
the
user
experience
MIMO
function
and is also
worse.
IurDcHsdsSuptInd indicates
the DRNC cell supports Dual
Cell function, but both the two
parameters
set to support do
reserved parameter
not means the DRNC cell can
active the MIMO and Dual
Cell in the radio link.

At next use
experience.
At next use
experience.
N/A
Immediately

Immediately
value equal 0

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
Yes
It should be set to
uplink 16QAM.

whether UL 16QAM license
of the cell is purchased by
the operator.
Take effect for the

next call
No
No
No
No
Yes
No
No
No
NO
N/A
N/A
Yes

the neighboring cell supports
E-DPCCH power boosting or
not.
Function:
The Rule:
parameter
Configuration
The
indicates
whether
Iur
parameter should the
be set
neighbouring
cellcapability
supports of
the
according to the
MIMO
Precoding cell
weight
set
the neighbouring
of the
restriction.
adjacent RNC.
according
the the
MIMO
It is relatedtowith
Precoding
weight
setand is
positioning function,
restriction
capability
of the Iur
neighbouring
cell.
survey,
the measurement
result
returned
to CN.
It is
When is
UE
is detected
entering
described
according
to
actual
specific area from noncell
condition.
specific
area, or entering nonspecific area from specific
area, RNC refers the SAI
This
parameter
indicates
responding
to the
Cell-ID of
whether
DBcell
DC-HSDPA
is
current UE
as positioning
supported
by
cell
under
result, and transmits location
DRNC.
is configured
report toItCN
through Iu port.
according to cell's capability.
Function:
used to
indicate
If the cell under
DRNC
has
number
of
DB
Secondary
DB DC-HSDPA capability,
Serving
for the neighbor
then thisCell
parameter
is set as
cell
over Iur. otherwise, it is
"Supported";
Related
factor:
the number of
set as "Not
Supported".
DB Secondary Serving Cell
This
parameter
is indicate
set as the
Function:
used to
DB
number
of
DB
Secondary
Secondary Serving Cell ID for
Serving
Cell which
theIur.
the neighbor
cell over
neighbor
cell
over
Iur
Related factor: DB Secondary
configures.
Serving Cell
Function
of this is
parameter:
This parameter
configured
configure
the backup
with the Possible
DB cell of
Adjacent
RNC
Cell, Cell
if theID for
Secondary
Serving
RNC
Backup
function
the neighbor cell over Iur .
needed.
According the Backup
relation,
configure
the
This parameter
is configured
corresponding
backup
according to the actual cell
net in
this
RNC
planning.Only when the cell
possesses the HSDPA
capability, the parameter is
valid.
the planning

according to the capability of
Immediately
the neighbouring cell of the
adjacent RNC.
N/A
Take effect after

the change is
loaded to the
RNC
N/A
At next
positioning
transaction
N/A
take effect on
next action
cell's capability which is
under DRNC.
Immediately
The number of DB
Secondary Serving Cell
which the neighbor cell over
Iur configures is considered
After handover
N/A
After handover
In Most Case, RNC Backup

is not needed
New User
at next admission
The parameter should be set control (RAB
setup/configuratio
n/handover, etc.)
N/A
N/A
the planning
planning parameter. iur
the capability of DRNC cell.
the capability of DRNC cell
Switch on the sttd can save
the power of downlink control
channels, so increase the
output of HSDPA
N/A
N/A
Immediately
Yes
No
No
No
No
No
No
No
No
No
No
No

parameter indicate the multiThis
parameter
indicates
cell E-DCH
transport
bearer
whether
mode. DC-HSUPA is
supported by cell under
DRNC.
It is configured
Configuration
Rule: ItThis
needs
Parameter
according
toFunction:
cell's
capability.
to
consider
the
capacity
of the
parameter
indicate
the multiIf
the cell bearer.
under
DRNC
has
transport
cell
E-DCH
transport
bearer
DC-HSUPA
For
multi-cellcapability,
E-DCH then
mode.
this
parameter
is set
as is
Transport
Bearer
Mode
"Supported";
otherwise,
it is
"Separate
Iub Rule:
Transport
Configuration
It needs
set
as
"Not
Supported".
Bearer
Mode"
"Separate
to consider
theorcapacity
of the
Iur
Transport
Bearer
Mode",
transport bearer.
the Mac-d
flows
from each
For
multi-cell
E-DCH
carrier
uses
different
Iubisor
Transport
Bearer
Mode
Iur
transport
bearers.
"Separate Iub Transport
For
multi-cell
Bearer
Mode"E-DCH
or "Separate
Transport
Bearer
Mode
is "UL
Iur Transport
Bearer
Mode",
Flow
Multiplexing
Mode",
the Mac-d flows from eachthe
Mac-d flows
receivedIub
on the
carrier
uses different
or
different
carriers
in the Node
Iur transport
bearers.
B
is multi-cell
multiplexed
on one Iub or
For
E-DCH
This
parameter
indicates
Iur
transport
bearer
(perisMacTransport
Bearer
"UL
External
GSM
CellMode
Object
ID
d
flow)
.
Flow Multiplexing Mode", the
Mac-d flows received on the
Function:
neighboring
different carriers
in thecell
Node
identity
B is multiplexed on one Iub or
Configuration
Rule: This
Iur transport bearer
(per Macparameter
should
be set
d flow) .
Function:
neighboring GSM
deployment.
cells' absolute radio
frequency
Function:
neighboring GSM
deployment.
cells' NCC
deployment.
Function: neighboring GSM
cells' BSIC.
deployment.
Function: LAC of the
neighboring cell
deployment.
cells' MCC.
deployment.
cells' MNC.
parameter
be set
Function ofshould
this parameter:
according the
to operator
network
configure
RAC of GSM
deployment.
Cell
negotiated with the GSM
neighbour cell, and
RAC of the neighbour GSM
Cell
cell's capability which is
under DRNC.
Immediately
Separate Iub/Iur Transport

Bearer Mode will not
increase the requirement of
the transport bearer.
Immediately
E-DCH UL Flow Multiplexing

Mode will increase the
Immediately
requirement of the transport
bearer.
Basic parameter
can not be
modified

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.
N/A
New users
No
No
No
No
No
No
No
No
No
No
No
No
The parameter wasn't be

used by RNC.
cells' MNC BCD Length
deployment.
cells' MCC.
deployment.
cells' MNC.
deployment.
cells' MNC BCD Length
deployment.
Function: GERAN Cell
Indicator
deployment.
cells' BSC Identifier
Configuration
Rule:
This
Function of this
parameter:
parameter
should
be
set
configure the SANC number
according
to operator network
of
GSM Cell
deployment
negotiated
GSM
Function ofwith
this the
parameter:
neighbour
cell,
and
configure the SANC info of
configured
GSM
Cell according to the
SNAC
of the
Factorsnumber
of consideration:
This
neighbour
GSM
parameter need Cell.
to beIf
network
sharing
is not
used,
negotiated
with the
GSM
this
parameter
is
set
as
zero
neighbour cell, and
SNAC
infoneighboring
of the neighbour
Function:
GSM
GSM
Cell.
If
network sharing
cells' BCCH ARFCN.
is
not used, this
parameter
Configuration
Rule:
This
don't
need
to
configured
parameter
should
be
set
Function: maximum allowed
according
to operator
network
uplink
transmit
power in
the
deployment.
GSM cell
Configuration Rule: UE
capability
The
parameter
is configured
Function:
HCS priority
by UE transmitRule:
capability.
Configuration
UE
Adjustment
Suggestion: Not
mobility speed
suggest
to modifyvalue
this is
If the parameter
parameter
smaller, the priority of the
GSM cell is lower.
UE will reselection to the
higher priority cells in low
to the low priority cells in high
mobility state.
N/A
not update except

power on

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.

New connection
network deployment.
New users
networks
N/A
New users

New connection
network deployment.
UE capability is taken into

New connection

network.
When best cell is

changed
No
No
No
No
No
No
No
No
No
No
No
No
Function: the minimum

required RX level
Configuration Rule: cell
coverage area
If the parameter
value
Function:
To extend
theis
smaller,
reselection
minimumcell
value
of QrxLevMin
criterion
will berequired
fulfilled easily,
(the minimum
RX
and
vice
versa.
level)
Adjustment
Suggestion:
Configuration
Rule: cell In
general,
this
parameter
Function:
To
extend
the will
covering radius
not
beparameter
adjusted.
minimum
value ofis QrxLevMin
If
the
"True",
(the
minimum required+RX
Qrxlevmin=Qrxlevmin
level)
DeltaQrxlevmin.
Configuration
Rule: cell This
covering
radius
If
the parameter
value
scenario
with large
cellis
Function:
the minimum
smaller,
handover
radius. inter-RAT
required
RX leveleasily, and
will be triggered
Configuration
vice versa. Rule: cell
coverage
area
Adjustment
Suggestion: This
If
the parameter
value
parameter
would
be the
setisin
Function:
To
extend
bigger,
cell
reselection
scenario
with
large
cell
minimum
value
of QrxLevMin
criterion
will berequired
fulfilled easily,
radius.
(the
minimum
RX
and
vice
versa.
level)
Adjustment
Suggestion:
Configuration
Rule: cell In
general,
this
parameter
Function:
To
extend
the will
covering radius
not
beparameter
adjusted.
minimum
value ofis QrxLevMin
If the
"True",
Function:
Handover
difficult
(the
minimum
required
Qrxlevmin=Qrxlevmin
+RX
level
is
controlled
by
adjusting
level)
DeltaQrxlevmin.
the
parameter.
Configuration
Rule: cell This
Adjustment
Suggestion:
Configuration
Rule:
covering
radius
parameter would
behandover
set in
difficult
level,
If
the parameter
value
scenario
with handover
large
cellis
timeliness
smaller,
radius. inter-RAT handover
If
the
value isand
will
beparameter
triggered easily,
smaller,
inter-RAT handover
vice versa.
will
be triggered
easily.If This
the
Adjustment
Suggestion:
Function:
The
parameter
is
parameter
value
larger,
parameter
would
set in
used
to judge
theisbe
downlink
inter-RAT
handover
will be
scenario
largecells.
cell
load
statewith
of GSM
triggered
hardily.
For
different
radius.
Configuration
Rule: inter-Rat
neighboring
cells,
different
value
will be set to
reflect
If
the parameter
is smaller,
Function:
The
parameter
is
handover
tendency.
GSM to
is thought
touplink
be load
used
judge
the
Adjustment
Suggestion:
For
overload
by UTRAN
more
state
of GSM
cells.
the
scenario
that
signalling
easily
in
inter-RAT
handover,
Configuration
Rule: inter-Rat
quality
varies quickly,
then
handover
to GSMthis
is
handover
probability
parameter
should
be set and
triggered
more
difficultly,
If
the parameter
is smaller,
Function:
The parameter
is
small
to protect
handover
vice
versa.
GSM
is
thought
to
be
used
to
judge
the
downlink
timeliness.
Adjustment
Suggestion:
Not
overload
by UTRAN
more
RT
load state
of GSM
cells.
suggest
to
modify
this
easily
in
inter-RAT
handover,
Configuration
Rule:
inter-Rat
parameter
then
handover
to GSM is
handover
probability
triggered
more
difficultly,
and
If
the parameter
is smaller,
Function:
The parameter
is
vice
versa.
GSM to
is thought
touplink
be RT
used
judge
the
Adjustment
Suggestion:
Not
overload
by
UTRAN
more
load
state
of
GSM this
cells.
suggest
to
modify
easily
in
inter-RAT
handover,
Configuration
Rule: inter-Rat
parameter
then
handover
to GSM is
handover
probability
triggered
more
and
If the parameterdifficultly,
is smaller,
vice versa.
GSM
is thought to be
Adjustment
Not
overload by Suggestion:
UTRAN more
suggest
to
modify
this
easily in inter-RAT handover,
parameter
then handover to GSM is
Function:
Indicator
of indoor
triggered more
difficultly,
and
cells
vice versa.
Configuration
Rule: This Not
parameter
suggest to should
modify be
thisset
according
parameter to operator network
deployment.
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
Handover difficult level,
handover timeliness,
When best cell is
handover tendency are taken changed
Inter-Rat handover
probability and load of GSM
default value.
At next use
Inter-Rat handover
default value.
When best cell is

changed
Inter-Rat handover
default value.
When best cell is

changed
Inter-Rat handover
default value.
When best cell is

changed
This parameter should be set When system

information is
network deployment.
changed.
No
No
No
No
No
N/A
No
No
No
No
No
No

parameter is UTRAN Cell
Object ID, It is unique under
its parent object.
Function:
Cell Identity.
Configuration Rule: CId of
different cells of the same
RNC should be different.
Adjustment Suggestion: CId
of different cells of the same
Parameter
This
Parameter
Function:
This
RNC shouldFunction:
be different.
parameter
indicates
the
parameter indicates the PICH
maximum
forparameter
the linear
Local Cell value
ID.power.
The
transmission
sum
of
the
power
of
must
be
configured
same
Configuration Rule: as
Itallneeds
downlink
physical
as consider
configuration
ofchannels,
NODEB.
to
the downlink
which
is allowed
to be used in
coverage
and system
a
cell.
capacity.
Configuration
Rule: It needs
The
to
consider
the
parameter valuecoverage,
is configured
system
to makecapacity
sure theand
UE the
in cell
actualreceive
ability of
edge
theNode
PICHB.rightly
Adjustment
Suggestion: If this
and avoid generating
parameter
is
small,
the
unnecessary too
power
waste.
coverage,
system
capacity
would
this value
small, be
thesmall.
pagingBut
information
of
this
parameter
cannot
might cannot be rightly
bigger than
the UE
actual
allowed
received
when
in the
edge
maximum
NodeUE
B.
of the cell, power
it mightofmake
read
the PCH
channel
According
to the
mode by
of the
mistake,
and
it
would
reduce
system, choose FDD mode.
the downlink coverage.
big, it would increase the
unnecessary
interference
This parameter
indicates to
other common
channel, and
reference
to ULocationArea
waste the downlink power, it
object.
would reduce the cell
capacity.
reference to URoutingArea
object.
parameter. service area code.
It
is decidedfunction:
by the network
Parameter
network
planner
according
to the
network
deployment.
parameter.
the indicator of
cell frequency band.
Parameter
network
It is decidedfunction:
by the network
parameter.
the occupied
frequency allocation
and
uplink
carrier
central
network deployment.
frequency point of the cell.
Parameter
factor:
function: network
planner
according
to the
parameter.
the central
frequency
allocation
and by
frequency of carrier used
network
deployment.
downlink channel.
frequency allocation and
network deployment.
N/A
can not be
modified
N/A
Cann't Modify
N/A
take effect when

cell re-establshed

configured by the Network
engineer based on the
situation.
Immediately
The default PICH power can

ensure high successful
paging rate and the biggest
system capacity.
Immediately
N/A
N/A
N/A
At next use
N/A
At next use
N/A
At Commit/New
user or new RL
N/A
At Commit
N/A
At Commit
N/A
At Commit
No
No
No
No
No
No
No
No
No
No
NO
No

transmission power level of
Parameter
network
the Primaryfunction:
CPICH (Common
Pilot Channel) .
parameter.
cellRule:
scrambling
Configuration
The
code.
Parameter
controlling
factor:
to satisfy the
requirement
of
It is decided
by
thereceive,
network
Parameter
Function:
PSCH
probability
of
right
planner
to the
transmission
coverageaccording
andpower.
system
network
deployment.
Configuration
Rule: The
capacity.
parameter
is configured
Adjustmentvalue
Suggestion:
based
on
the
requirement
on
coverage
and
capacity
of
Parameter
Function:
BCH
small, the PCPICH
Parameter
Function:coverage
S-SCH
system.
Power.
would
be so small
that the
transmission
power.
Adjustment
Suggestion:
Configuration
Rule:
It needs
UE's
probability
of right
Configuration
Rule:
The
If
the
parameter
value
too
to
consider
the downlink
receiving
would
be
badiswhen
parameter
value
is configured
small,
the
PSCH
coverage
coverage
and
system
UE is in
edge
of the cell.
based
onthe
the
requirement
on
will
beparameter
so The
small
that
theisofUE
capacity.
If the
value
too
coverage
and parameter
capacity
cannot
the
cell
value
configured
to when
ensure
large, is
itseach
would
increase
the it
system.
is
in
the
edge
of
the
cell.
the
UE
in
cell
edge
receive
unnecessary
interference,
AdjustmentFunction:
Suggestion:
Parameter
This
If
parameter
value
too
the
system
information
and
waste
the
downlink
If the
the
parameter
value
isrightly
too
parameter
indicates
theis
AICH
large,
it
will
increase
the
and
avoid
generating
power
and
decrease
the
small,
the
SSCH
coverage
transmission power.
interference
unnecessary,
unnecessary
power
downlink
will
be so capacity.
small
that Itwaste.
the
UE
Configuration
Rule:
needs
waste
the
downlink
power
If
the
parameter
value
is tooit
cannot
seach
cell
when
to
consider
thethe
downlink
and
the
downlink
small,
the
BCHof
coverage
is in decrease
the
edge
the
cell. will
coverage
and
system
capacity.
be
so
small
that
the
UE's
capacity.
probability
right receiving
large,
it willofincrease
the The
Adjustment
Suggestion:
will
be
bad
when
it
is
in the
interference
unnecessary,
parameterThis
value
is configured
Function:
parameter
edge
ofthe
the
cell.
waste
downlink
power
to
make
sure
the
UE
in
cell
indicates
the minimum
If
thedecrease
parameter
value
isrightly
too
and
the
downlink
edge
receive
the
AICH
required
quality
level
of the
big,
it
will
increase
the
capacity.
and
avoid satisfies
generating
cell
which
the
unnecessary
interference,
unnecessary
power
waste. or
condition
of
being
selected
waste
the This
downlink
power
If
the
parameter
value
is too
Function:
parameter
reselected
by UE.
When
the
and
decrease
the downlink
small,
thethe
AI information
indicates
minimum
measurement
quantity
is
capacity.
might
cannot
beonly
rightly
required
received
power
CPICH
Ec/No,
the level
Adjustment
Suggestion:
received
when
UE
inthe
thecell
edge
of
the cell which
satisfies
theis
measured
quality
of
When
theof
some
UEs
in thethe
of
the
cell,
it
would
reduce
condition
being
selected
or
over
Qqualmin
can
the
cell
edge
cannot
receive
the thebe
downlink
coverage.
reselected
by
UE.
When
selected.
system
information
rightly,
the
If
the parameter
value
measurement
quantity
is too
Configuration
Rule:
cellis
BCH
power
can
be
increased,
big, it would
increase
CPICH
RSCP,
only thethe
covering
radius.
otherwise
the
BCH power
can
unnecessary
interference
measured
received
power
If
the
parameter
value
Function:
To extend
theis to
be
decreased.
other
common
channel,
and
level
of the
cell
is
smaller,
cell
reselection
minimum
value
of over
QrxLevMin
waste
the
downlink
power,
it
Qrxlevmin
canrequired
the
cell
be
criteria
is easier
fulfilled
, and
(the
minimum
RX
would
reduce
the
cell
selected.
vice versa.
level)
capacity.
Configuration
Rule:
Configuration
Rule: cell
cell The
covering
radius.
default
value
is
covering
radius.
Function:
If operator
If
parameter
valueexpect
is
recommended.
If the
thesome
parameter
that
cells
are not
smaller,
cell
reselection
"DltaQRxLevMinPr"
is
"True",
allowed
accessed,
the, and
criteria
istoeasier
fulfilled
Qrxlevmin=Qrxlevmin
+
parameter
value
is
"Reserved
vice
versa.
DeltaQrxlevmin.
"Adjustment
in SIB3. Suggestion: The
Adjustment
Suggestion:
Configuration
This This
default
value
isRule:
parameter
would
be
set inby
parameter
is determined
recommended.
scenario
with large cell
the
operator.
Main
radius.
If
the value
is 'reserved',
the
indicates
whether
STTD can
cell
cannot
be
camped
on,
be used on the downlink
except
for particular
UEs,
DPCH/F-DPCH
of the
cell.if so
indicated in
the system
Influence
factor:
the actual
information.
capability of the cell.
If
value
'not
reserved',
If the
STTD
canisbe
used
on the
the
cell
can
be
camped
on.
downlink
DPCH
of
the
Function: his parametercell
than
the parameter
is set loop
to
indicates
whether closed
true, otherwise,
the parameter
mode1
is supported
in the
is
set to false.
cell.
Configuration Rule:
It should be set according to
the cell capability.
N/A
requirement of coverage and
system
capacity.
The default
value is
cell
The capacity.
default value is
The
default value is
cell capacity.
requirement of cell coverage
radius and the system
The
default AICH power can
capacity.
ensure the UE in the edge of
the cell can receive AI
information rightly, and the
system capacity is the
biggest.
according to the cell covering
radius.
At Commit
Immediately
Immediately
Immediately
Immediately
Immediately
When system
information is
changed

When system
information is
radius.
changed
When system
information is
radius.
changed
If operator has no specil use , When system

the cell should be camped
information is
on.
changed
The defafalt value is false,
becase most cell doesn't
support this function. The
parameter should set by the
actual capability of the cell.
Immediately
N/A
Take effect after

the change is
loaded to the
RNC
No
No
No
No
No
No
N/A
No
No
Yes
No
No
Function: Diversity mode of

downlink physical channels.
recommended that transmit
diversity mode should be
activated ifHandover
two antennas
are
Function:
difficult
installed
and cell not
level
is controlled
by adjusting
supporting
MIMO or
the parameter.
supporting
MIMO
with
PConfiguration
Rule:
handover
This
parameter
indicates
CPICH
+
P-CPICH.
difficult
level,
handover
reference
timeliness to UUtranRegArea
object.
smaller, handover will be
triggered easily.If the
parameter value is larger,
handover will be triggered
hardily. For different
neighboring
cells, Different
Parameter Function:
This
value
will
be
set to reflect
parameter indicates
the
handover
tendency.
transmission
power
of the
This
parameter
indicates
Adjustment
Suggestion:
For
PCH
mapped
on
the
Function:
HCS
priority
reference
to UIubLink
object.
the
scenario
that signalling
SCCPCH.
Configuration
Rule: UE
quality
varies quickly,
Configuration
Rule: It this
needs
mobility
speed
parameter
should
be set
to
consider
the
downlink
If
the parameter
value is
small
to protect
handover
coverage
and
system
smaller,
the
priority
of the
timeliness.
capacity.
UMTS cell is lower.
Adjustment
Suggestion:
UE will reselection
to theThe
PCH
should
ensure
higherpower
priority
cells in
low the
UE
in
cell
edge
receive
the
paging
information
rightly
to the lower priority cells inand
avoid
generating
unnecessary
high mobility
state.
power waste.
small,
the Quality
paging Threshold
information
Function:
might
cannot
be
rightly
Level for Applying Prioritised
received when
UE
in the edge
Hierarchical
Cell
Reselection
The
IPcell,
address
of the
cell. the
of the
it would
reduce
(QHcs)
When
Measurement
downlink is
coverage.
Quantity
CPICH Ec/No (dB)
the
parameter
value
is too
.If
It
guarantees
the
access
Function: Quality
Threshold
big,
it
would
increase
the
quality.
Level for Applying Prioritised
unnecessary
interference
to
ConfigurationCell
Rule:
HCS, the
Hierarchical
Reselection
other
common
channel,
and
change
of
signal.
waste
the
power,
When
HCS
is used,RSCP
if the it
Quantity
isdownlink
CPICH
would
reduce
the
cell
parameter
value
is
smaller,
(dBm) .It guarantees the H
capacity.
criterion
will be fulfilled easily
access quality.
and
cell
reselection
bethe
Configuration Rule: will
HCS,
triggered
and vice
Function:
The
parameter
change ofeasily,
signal.
versa.
value
"True"
to extend
WhenisHCS
is used,
if thethe
Adjustment
Suggestion:
ThisH
cell
reselection
criteria.
parameter
value
is smaller,
parameter
will
not
be
used.
Configuration
Rule:
cell
criterion will be fulfilled easily
covering
radius.
and cell reselection
will be
If
the parameter
is "True",
triggered
easily, and
vice
Qrxlevmin=Qrxlevmin
+
versa.
DeltaQrxlevmin.
Adjustment
Suggestion:
This
parameter will
not be used.
This
parameter
indicates
scenario
with large
cell
reference
to
radius.
UNbComMeasProfile object.
parameter is the DN
UTrvMeasProfile.
Usually, the cell is of single

antenna.
Take effect after

related Common
Transport
Channel is
deleted and setup
again.
N/A
At next use

When best cell is
N/A
At next use

network.
When best cell is

changed
When PCH power is -3dB,

the successful paging rate is
Immediately
high, and the system
capacity is the biggest.
N/A
N/A
The parament is set

according to the change of
signal quality.
When system
information is
changed
The parament is set

according to the change of
signal quality.
When system
information is
changed

When system
information is
radius.
changed
N/A
At next use
N/A
At next use
No
NO
No
No
No

indicates the timing delay
used for defining the starting
time of SCH, CPICH and the
DL scrambling code (s) in a
cell relative to BFN.
Influence
factor: the number
N/A
of the cells with same
frequency; whether the cell .
The Tcell must be different in
the same sector. If the
number
the cells scenario
with same
Function:ofPathloss
frequency
is
less
than
10, the
indicator, used for downlink
Tcell ofprediction
these cellinmust
be
power
admission
different,
control the value take from
(0~9)
; otherwise,
the
Tcell of
Configuration
Rule:
actual
those
cell
which
is
bigger
than
network
scenario
Parameter
function:
network
10
begin
with
0.
This
parameter is set based
If the
NODEB
support
DC If
on
actual
network
scenario.
parameter.
isarequired
to be
andpathloss
the cellItisis
secondary
the
larger,
the
configured
when
the
cell
serving
cell
of the
other cell,
downlink
power
prediction
is
supports
the
cell
broadcast
then
the
Tcell
must
be the
larger.
service.
this
same asOtherwise,
the other cell.
parameter is not required to
be configured.
planner
according
to the
This parameter
is not
be used
network
deployment.
now.
N/A
At next use
None
Immediately

according to actual network New connection
scenario.
N/A
At Commit
N/A
Immediately
No
It is usually configured by 0.
N/A
At next
positioning
transaction
No
The parameter is configured

according actual cell
condition.
N/A
At next
positioning
transaction
No

condition.
N/A
At next
positioning
transaction
No

condition.
N/A
At next
positioning
transaction
No
No
No

N/A
condition.
N/A
result is returned to CN. It is
described according to actual
cell condition.
It is configured through actual
N/A
test
At next
positioning
transaction
At next
positioning
transaction
At next
positioning
transaction
No
No
No
No

It
is condition.
used in Cell ID/Cell
cell
ID+RTT survey, the
measurement result is
returned to CN. It is
configured according to cell
condition.
It is used in Cell ID/Cell
ID+RTT survey, the
condition.
It is used in Cell ID/Cell
ID+RTT survey, the
condition.
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
No

the cell.
N/A
at next use
No
cell condition.The Larger the
value is, the confidence the
result is.
N/A
At next
positioning
transaction
No
cell condition.
N/A
At next
positioning
transaction
No
No

actual location information of N/A
the cell.
N/A
cell condition.
at next use
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
No
antenna condition.
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction

normal choice. The outfield
should considering all
factors: the actual capability
of the cell; request of the
operator.
Immediately
N/A
Immediately
N/A
Immediately
N/A
At next use
No
No
No
Yes
NO
No
No
No
No
It is configured
according
to
Main
function: This
parameter
cell condition.
indicates
the support of DCH,
It
is related
the in the
HSDPA
andwith
HSUPA
positioning
function,
and is
cell.
used
in
Cell
ID/Cell
ID+RTT
Influence factor: the actual
survey, theofmeasurement
capability
the cell; request
result
of the is
operator
configured
to cell
The bigger according
the parameter
is,
condition.The
wider
the
the longer the timer of the
interior
corner
the larger
user waiting
tois,
access
the
cell
coverage
is.
UTRAN is.
The smaller the parameter is,
the shorter the timer of the
Function
of this
parameter:
user waiting
to access
the it
indicates
whether
MBMS
UTRAN is, however, the is
supported
in may
the cell.
system cost
be more
It
is set according to the
higher.
network
layout.Ifcan't
it is be
set to
The parameter
"1",
thethan
cell support
the
higher
the actual
MBMS,
otherwise
theSupport
cell
capability
of the cell.
does
not
support
the
MBMS.
HSUPA,version
HSDPAdoes
and DCH.
Current
not
Reason:multiple
all ZTE user
cells support
support
HSPA.
detection. This parameter is
invalid.
Function:
CS preferred
in the
The parameter
is not used
in
cell
current SW Version.
If the value of this parameter
is "1", this traffic is prior to be
absorbed on this cell.
Otherwise,R99
it isPS
"0",preferred
this trafficin
Function:
is
expected to be
thenot
cell
accessed
If the valueonofthis
thiscell.
parameter
However,
if
the
has to be
is "1", this trafficcell
is prior
capability
to
afford
this
absorbed on this cell. traffic
and other cells
load
are traffic
high,
Otherwise,
it isPS
"0",
this
Function:
HS
preferred
this
cell
can
alsotoabsorb
thisin
is
not
expected
be
the
cell
traffic.
accessed
If the valueonofthis
thiscell.
parameter
However,
if
the
has to be
is "1", this trafficcell
is prior
capability
to
afford
this
absorbed on this cell. traffic
and other cells
are traffic
high,
Otherwise,
it is load
"0", this
this
cell
can alsotoabsorb
this
is not
expected
be
traffic.
accessed on this cell.
However, if the cell has
capability to afford this traffic
and other cells load are high,
this cell can also absorb this
traffic.
Cell's and service's attribute

are considered to define this Immediately
default value.

default value.

default value.
No
Yes
Yes
Yes
NO
NO
NO
NO
No
No
No
No
Function: uplink power

handover switch
Function:
HCSRule:
function
switch
Configuration
system
Configuration
Rule:
performance
If the
the parameter
parameter is
value
is "0",
If
set to
"True",
HCS
will be
used
and
handover
based
on
uplink
Function:
uplink
Bler
H
criterion
will
be
fulfilled
in
power
is not
used.
handover
switch
process
of
cell
reselection.In
If
the parameter
is set
to "1",
Configuration
Rule:
system
general,
HCS
is not
used.
handover
based
on
uplink
performance
power
is used. For
some
If
the parameter
is set
to "0",
scenario,
the
uplink
power
handover
based
on
uplink
Function:
DTCP
handover
reaches
the
maximum.
The
Bler
is not
used.
switch
parameter
will
set
"True"
to
If
the parameter
is set
to "1",
Configuration
Rule:
system
perform
handover
for
avoiding
handover
based on uplink
performance
great
interference
for other
Bler
isparameter
used. For is
some
If
the
setsystem
to "0",
users andthe
improving
scenario,
uplink
power is
handover
based
on
DTCP
performance.
reaches
maximum and
not
used.thehandover
In
general,
based
Bler
is
bad
yet.
the
parameter
Main
function:
This
parameter
If
the parameter
is set
to
"1",
event
2D
can
fulfill
the
quality
will
set "True"
to perform
indicates
whether
SIB12
is is
handover
based
on
DTCP
requirement,
so
this
handover
improving
broadcast
in the
cell.
used.
For for
some
scenario,
the
parameter
could
be set "0".
systemreaches
performance.
Influence
factor:the
whether
the
DTCP
maximum
In
general,
handover
based
FACH
measurement
occasion
power
and signal
quality
is
event
2D
can
fulfill
the
info
and
Measurement
control
bad, the parameter willquality
set
requirement,
so this
system
is same in
"True" toinformation
perform
handover
parameter
could
be
connected
mode
and
in "0".
idle
for improving systemset
mode.
performance.
If
FACHhandover
measurement
Inthe
general,
based
occasion
event 2D info
can and
fulfill the quality
Measurement
control
system
requirement,
so
this
This
parameter
is
configured
information
is
same
in
parameter to
should
be setnet
"0".
according
the actual
connected
mode
andthe
in idle
planning.Only
when
cell
mode,
the SIB12
is not
possesses
the HSDPA
needed,
otherwise, the SIB12 is
valid.
This
parameter is configured
needed.
according to the actual net
planning.Only when the cell
possesses the HSUPA
valid.
This parameter is for future
use.
Function: intra-frequency
profile distinguish name
network
Function:condition.
Intra-frequency
measurement profile identity
for VIP users
scene
Function: inter-frequency
network
Function:condition.
inter-RAT
network condition.

network.
When system
information is
changed
Handover based event 2D

can fulfill the quality
When best cell is
requirement, so this
changed
parameter should be set "0".
When best cell is
changed
parameter should be set "0".
parameter
beFALSE,
set "0".
The
defaultshould
value is
because in default setting
parameters, the FACH
measurement occasion info
and Measurement control
system information is same
in connected mode and in
idle mode.
When best cell is

changed
Immediately
at next admission
control (RAB
setup/configuratio
n/handover, etc.)
at next admission
The parameter should be set control (RAB
setup/configuratio
n/handover, etc.)
N/A
new users

When best cell is
changed
planning.

Immediately
planning.

When best cell is
changed
planning.

When best cell is
changed
planning.
No
No
No
No
No
No
Yes
No
No
No
No
No

indicates the cell type.
Configuration
Rule:
The the
This parameter
indicates
parameter
should
be
set
Background
Noise
Automatic
Function:
When
the
radio
according
to
cell
type
in link
Adjustment
Scene,
which
is
Function:
When
the radio
link
set
is
in
the
out-of-sync
state,
network
planning.
used
to
distinguish
difficult
set
in the in-sync state,
afterisreceiving
scene
easystart
scene
for
Node
Borshall
timer
N_INSYNC_IND
successive
Background
Noise
T_RLFAILURE
after
receiving
in-sync indications Node B
Automatically
Adjusting.
The
N_OUTSYNC_IND
shall trigger the
RL Restore
Function:
When
the radio
link
easier to adjust,
lesswhich
error
consecutive
out-of-sync
procedure
and
indicate
set
is
in
the
in-sync
state,
between
Background
Noise
indications.
B shall stop
radio link setNode
has reNode
B shall
start timer
and
the
real
value
in high load
reset
timer
established
synchronization.
T_RLFAILURE
after
cells,
but
mistakenly
adjusting
T_RLFAILURE
upon
When the RL Restorereceiving
N_OUTSYNC_IND
maybe
happen.
receiving
successive
procedure is triggered, the
consecutive
out-of-sync
N_INSYNC_IND
in-sync
state of the radio
link set
indications.
Node
B shall
stop
indications.
If T_RLFAILURE
change to the
in-sync
state.
and
reset
timer
expires,
Node Rule:
B shall trigger
Configuration
T_RLFAILURE
uponthe radio
the
RL Failure
procedure
and
In order
to recovery
receiving
successive
indicate
which
radio
setin
is
link in the out-of-synclink
state
N_INSYNC_IND
in-sync
out-of-sync.
When
the
RL
time, the parameter is set to
indications.
If T_RLFAILURE
Failure
procedure
is triggered,
relatively
small
value
but not
expires,
Node
Bradio
shall
trigger
the
thePing
link
set
1 tostate
avoidofthe
Pang
state
the
RL
Failure
procedure
change
to the out-of-syncand
transition.
indicate
state. which radio link set is
out-of-sync.
ConfigurationWhen
Rule:the RL
When
UE
is detected
entering
Failure
procedure
isset
triggered,
Function:
detected
The time
length
determined
specific
area
from
nonthe
state
of
the
radio
link
set
handover
switch and
by this parameter
specific
area,
or
entering
change
to
the
out-of-sync
Configuration
Rule:
TRIFailure shall
not UE
be nonspecific
area
from
specific
state.
mobility
continuity,
call
drop
smaller than the time length
area,
RNC refers
the and
SAI
Configuration
possibility
determined
byRule:
N313
responding
tothe
the
Cell-ID
of
The
this
parameter
is,
If
thelarger
parameter
is
setcan
to "0",
T313
so that
UE
current
UE
cell
as
positioning
the
later
the
radio
link
failure
handover
based
on
detected
trigger
the
radio
link
failure
Function:
handover
judgment
result,
andnot
transmits
location
procedure
starts
but
the
set
could
be triggered.
procedure
before
NodeB.
event
for
inter-frequency
report
to
CN
through
Iu port.
downlink
interference
When neighboring cells
handover
increases.
The
shorter
this be
exceeds
32,
call
drop
may
Configuration Rule: judgment
parameter
is,
the
less
happened,
as
neighboring
Function:
inter-rat
event
accuracy
opportunity
is for thehandover
downlink
cells
is cut out.
choice
The inter-frequency
radio
link
to
be
synchronized
If
the
parameter
is
set
to "1",
Configuration
Rule:
can be triggered by event
2A,
again.
handover
based
on
detected
measurement
accuracy
event 2B or event 2C. Event
set
could
be
triggered
to
Event
3a means
that
the
2A means
change
of best
provide
UE
mobility
continuity.
estimated
quality
the
frequency
is moreofprecise
Function:
Maximum
Allowable
Function:
Maximum
Bit Rate
currently
used
UTRAN
than
event
2B/2C.
Rate
on
DCH
to
be
Increased
on
DL
DCH
for
NRT
RAB
frequency
is below
aPS
certain
In
some scenario,
interto
When
UE
is in Macro
in
Serving
Cell.
threshold
and
the estimated
frequency
handover
Diversity.
Configuration
Rule:system
Itisneedsis
quality
of
the
other
expected
to
perform
Configuration
Rule:
Itquickly,
needs
to
consider
the transmission
above
a
certain
threshold,
this
parameter
should
be set
to considerofthe
user
bandwidth
Iub,
the
user
Function:
Maximum
Bit
Rate
which
is2c".
include
event
3B
and
"event
experiences
and
the
ratio
of
experiences
and
the
on
UL
DCH
for
NRT
PS
RAB
3C,
so
event
3A
is
suggested
call
drop.
successful
call
ratio.
in
Serving
Cell.
for
most
ofof
scenarios.
The
value
this
parameter
The
reason
of
the
adding
of is
Configuration
Rule:
It
needs
For
some
scenario,
ifallowed
the
larger,
the
rate
to
be
this
parameter
is
used
for the
to
consider
thethe
transmission
inter-rat
handover
is expected
is
higher,
and
user
scene
of
very
limited
bandwidth
of
Iub,
the
user
to
triggered is
quickly,
event but
3C
experience
also better,
transmission
bandwidth
of Iub
experiences
and
the
be
used
due
to
the trigger
itwill
is
also
easier
to
increase
to
avoid many
users'
bad user
successful
callbe
ratio.
condition
fulfilled
the
risk ofcan
call
drop.
experiences
because
of some
The
reason
ofthis
theparameter
adding
of is
easily
thanofevent
3A.
The
value
user's
high
bit
rate
in
the
this
parameter
is
used
for
the
smaller,
the rate to be allowed
same
cell.
scene
of
very
limited
is
lower,
the
experienceis
The
value
of user
this
parameter
transmission
bandwidth
of Iub
is also the
worse.
larger,
rate
to
be allowed
to avoid many users'
bad user
is
higher, andbecause
the userof some
experiences
experience
is
also
user's high bit rate better,
in the but
itsame
is also
easier
to
influence
cell.
other
users'
quality. is
The value
oftraffic
this parameter
The value
this
larger,
the of
rate
to parameter
be allowedis
smaller,
rate
be allowed
is higher,the
and
thetouser
is
lower,
and
the
successful
experience is also better, but
call
ratio easier
is also to
higher,
but
it is also
influence
the
user
experience
is
also
other users' traffic quality.
worse.
N/A
Take effect after

the change is
loaded to the
RNC
Scene Parameter, No default

value, should be set by
Immediately
network planning operators.
In order to recovery the radio
link in the out-of-sync state in
time, the parameter is set to
relatively small value but not
1 to avoid
the Ping
Pang
The
time length
determined
state
by thistransition.
parameter and
TRIFailure shall not be
smaller than the time length
determined by N313 and
T313 so that the UE can
trigger the radio link failure
procedure before NodeB.
N/A
N/A
Take effect for the

next new RL after
the CELL
RECONFIGURAT
ION REQUEST
message
Take effect for the
next new RL after
the CELL
RECONFIGURAT
ION REQUEST
message
Take effect for the
next new RL after
the CELL
RECONFIGURAT
ION REQUEST
message
take effect on
next action

according to UE mobility
When best cell is
continuity and call drop
changed
possibility.
When best cell is
according to judgment
changed
accuracy.

When best cell is
according to measurement
changed
accuracy.
The reason of the
user experience.
At next use
The reason of the

user experience.
At next use
The reason of the

user experience.
At next use
No
No
NO
No
NO
NO
NO
No
No
No
No
No
measurement quantity, used

for handover judgment
Configuration Rule:
Function:
intra-frequency
measurement
accuracy
measurement
Taking accountquantity,
of Cpichused
EcNo
for
handover
judgment
being more precise than
Configuration
Rule:
intraCpich RSCP for
intrafrequency
frequency interference,
handover
measurement
accuracy
evaluation
, Cpich
is
Main
function:
ThisEcNo
parameter
Taking
account
of Cpichtimes
EcNo
suggested
in maximum
intra-frequency
indicates
the
being
more precise
than
in general.
for
a paging
message
to be
Cpich
RSCP
for
intraFor some scenario, Cpich
sent.
frequency
handover
RSCP is good
but
Cpich
Influence
factor:
the
evaluation
, Cpich
EcNo
is
EcNo
is
bad,
this parameter
probability of
paging
success;
suggested
in intra-frequency
should
be set
"Cpich
RSCP
the
probability
of
in
general.
and
Cpich EcNo".
resourcecongestion.
For
scenario,is,if
The some
biggerspecial
the parameter
Cpich
RSCP
can
evaluate
the higher the probability of
signal
more
pagingvariation
successful
is, precise,
then
the
parameter
However, the higherwill
thebe set
as Cpich RSCP.
probability
of
Main
function:
This parameter
Parameter
Function:
This
resourcecongestion
is.
indicates
whether
SIB4
parameter
theisused
The smallerindicated
the parameter
is,
broadcast
in the
cell.
USrvPcProfile
(Service
the lower the
probability
of
Influence
factor:Control
whether
Cell
Related
Power
paging successful
is,
selection
and
re-selection
Profile)
.
However,
the lower
the info
MainCell
function:
This
parameter
and
Access
Restriction
is
probability
of
indicates
whether
SIB6
is and
same
in
connected
mode
resourcecongestion
broadcast
in the cell.is.
in idle mode.
Influence
whether
If the Cell factor:
selection
and recommon
physical
selection info and channel
Cell Access
Information
frequency
Restriction isand
same
in
information
is same
connected mode
andinin idle
connected
modeisand
mode, the SIB4
not in idle
mode.
needed,
Main
If
the common
physical
otherwise,
the SIB4
is
indicates
whether
PCCPCH
channel
Information
and in
needed.
Information
is configured
frequency
information
is
Parameter
Function:
This
SIB5.
same
in
connected
mode
parameter
indicates
whether
The Primary CCPCH is a and
in
idlerate
mode,
SIB6
is not
dynamic
persistence
level
fixed
(30 the
kbps,
SF=256)
needed,
information
of SIB6
PRACH is
downlink physical
channels
otherwise,
the
SIB6
is
configured
in SIB7.
used to carry
the
BCH
needed.
Configuration
Rule:
The
transport channel.
system
information
block
PCCPCH
Information
is type
6
contains
parameters
for the
configured
in
SIB5.
Parameter
Function:
This
Function:
This
parameter
configuration
of
the
common
parameterthe
indicates
SIB7
indicates
Cpich Ec/N0
and shared
channels
originator
is physical
RNC
or
NodeB.
threshold
for
blind
handover
to
be used in connected
Configuration
Rule:
It
in
procedure
of parameters
serviceneeds
mode.
PRACH
to
ensure
the
RTWP
be
reconfiguration.
If reported
are
most
frequently
used
update
in
time
and
exactly.
Cpich
Ec/N0
source
cell so
is
Function:
This
parameter
when
UE
is
inofIDLE
mode,
RNC
originate
SIB7
is based
less
than
or
equal
to
indicates
the
Cpich
RSCP
the
default
valuemeasurement
is set to
on the
common
EcNoQualThrd
or reported
threshold
forNode
blind
handover
"False" by
reported
B,
so it or
is
Cpich
Ec/N0 is
less
than
in
procedure
of
service
not
in
time
and
exactly.
equal
to RscpQualThrd,
blind
reconfiguration.
If reported
NodeB
update
RTWP
is more
handover
will
not
be
Cpich
of source cell is
in
timeRSCP
and exactly
triggered.
factor:
EcNoQualThrd
or reported
Parameter
Function:
DL TPC
user
experience
andthan
network
Cpich
RSCP
is
less
or
pattern
01 count.
feature
equal
to
RscpQualThrd,
blind
Configuration
Rule: This
When
the will
service
handover
not be
parameter
is
used
reconfigures
, if thisto ensure
triggered.
the
TPC
command
"0"will
and
parameter
is
small ,isUE
Parameter
controlling
factor:
"1"
by
turns
before
the
uplink
blind experience
handover more
easily
user
and network
is
synchronized
when
and
may drop the
call.first
feature
radio
link is
setup,
avoid
Oherwise
,service
the
UE itwill
blindthe
When
the
power
be
adjusted
by
handover
hard.
reconfigures
, if this
mistake.
parameter
is
small
, UE willis,
The bigger this
parameter
blindlonger
handover
easily
the
initialmore
power
be
and
kept.may drop the call.
Oherwise
, the
will blind is,
The smaller
thisUE
parameter
handover
hard.
the shorter initial power be
kept, and the higher
probability of the power be

When best cell is
according to measurement
changed
accuracy.
according to intra-frequency When best cell is
interference and
changed
measurement accuracy.
apply when RNC
probability of paging success;
send paging
the probability of
resourcecongestion.
N/A
The default value is FALSE,
because in default setting
parameters, the Cell
selection and re-selection
info and Cell Access
Restriction is same in
The
defaultmode
valueand
is FALSE,
connected
in idle
because
mode. in default setting
parameters, the common
physical channel Information
and frequency information is
same in connected mode
and in idle mode.
The default value is TRUE,
and is get by test result of
The
system information block
outfields.
type 6 contains parameters
for the configuration of the
common and shared physical
channels to be used in
connected mode. PRACH
parameters are most
frequently used when UE is
in IDLE mode, so the default
Because
Node
B update
value is set
to "False"
RTWP is more in time and
exactly.
At next use
Immediately
Immediately
When system
information is
changed
Immediately
Immediately

At Next Use

At Next Use
parameter can avoid the
power be adjusted by
mistake.
Cell setup
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes

parameter
to do testing
Parameter is
Function:
This and
function
this parameter:
demo of indicates
parameter
the
This
parameter
indicates
cell
maximum
allowed
UL
switch
of
fast
return
to
transmission
power of RACH.
Function:
PRACH
EUTRAN.
Configuration
Rule:
Configuration
SceneIt. needs
Factors
of consideration:
user
to
consider
the
uplink
Configuration
Rule:
thePRACH
experience
and
network
coverageofand
interference
to
number
PRACH
in the
feature.
If cell
need
fastcell,
the
neighboring
cell.toThe
the
capacity
of
enhanced
return
to EUTRAN
, this
parameter
be
set
uplink
fach,should
downlink
code
parameter
is
set
1,
otherwise
according
to
the
coverage
of
resource.
0.
the
cell
to
ensure
that
the
UE
Adjustment Suggestion: if the
at
cellnot
border
can be
cellthe
does
support
acknowledged
byfach,
Nodethis
B and
enhanced
uplink
reduce
the is
interference
to the
parameter
set to
neighboring
thetosame
'0'.Otherwise,cell
it isatset
'1' or
time.
'2'.If this parameter is '1', the
Bigger
parameter
is,code
cell canthis
save
one AICH
bigger
the
uplink
PRACH
resource, but R99 PRACH
coverage
is. uplink
This
parameter
indicates
and
enhanced
fach
Smaller
parameter
is,
whether
DB DC-HSDPA
is of
PRACH this
share
the resource
smaller
the
uplink
PRACH
supported
by the
cell.If
operators
one PRACH,
access
ratio
coverage
is.will bethe
buy
this license,
value of
of success
affected.If
Function:
This parameter
this
is
as cell
this parameter
parameter
is set
'2', the
indicates
the
cell
type
that
"Supported";
otherwise,
it is
can need one more AICH
DPI
applied.
This
type
is used
set
asresource,
"Not Supported"
code
but
R99
Parameter
function:
the
to
choose
the
DPI related
PRACH
switch
forand
theenhanced
function ofuplink
the
parameters.
fach
PRACH use the different
Call
Re-establishment
in
Related
Factor:
the
resource,
this will
make sure
specified
call-flow.
characteristic
of
thesuccess.
area
the
access
ratio
of
Parameter
controlling
which
the cell
covered.factor:
function
on function:
or off,
cellthe
call reThis
parameter
is quoted
Parameter
establishment
success
here. It's
adjusted.
switch
fornot
thebe
function
ofratio.
the
If
on,Re-establishment
then the call mayinnot be
Call
dropped
far as possible by
specifiedas
call-flow.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
asthe
soon
as
possible
If
on,
then
call
may
not be
Call
Re-establishment
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function on or off, cell call reIf off, then the call
can be
establishment
success
ratio.
released
soon
possible
If on, thenasthe
callas
may
not be
and
user as
experience
may be
dropped
far as possible
by
better.
call re-establishment
procedure.
If off, then the call can be
released as soon as possible
and user experience may be
better.

Immediately
default

At Next Use
the uplink PRACH coverage
and the interference to the
neighboring cell.
Take effect after

the system
information is
updated
Take
effect after
the system
The cell default does not
information 5 is
support the enhanced uplink updated and
fach and one R99 PRACH is Related common
enough.
transport channel
will be deleted
and setup
is decided by whether
Immediately
operators buy this license.
N/A

call drop ratio, user
experience and cell call reestablishment success ratio.
At next use
At next use
At next use
At next use
At next use
At next use
At next use
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Parameter function: the

switch for the function of the
Call Re-establishment in
specified call-flow.
function
on function:
or off, cellthe
call reParameter
establishment
successofratio.
switch
for the function
the
If
on,Re-establishment
then the call mayinnot be
Call
dropped
far as possible by
specifiedas
call-flow.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function
on function:
or off, cellthe
call reParameter
If
off, then the
call
can be
establishment
success
switch
for
the
function
ofratio.
the
released
soon
possible
If
on,Re-establishment
thenasthe
callas
may
not be
Call
in
and
user as
experience
may be
dropped
far as possible
by
specified
call-flow.
better.
call
re-establishment
procedure.
function on or off, cell call reIf
off, then the call
can be
establishment
success
ratio.
released
soon
possible
If on, thenasthe
callas
may
not be
and
user as
experience
may be
dropped
far as possible
by
better.
Function
of this parameter:
call re-establishment
This
procedure.
Virtual
LACthe
of call
the CELL
If off, then
can be
Factors
the
releasedofasconsideration:
soon as possible
boundary
of LAC
and user experience
may be
ifbetter.
CELL is at the boundary of
LAC, the Virtual LAC is set as
the
neighbour
LAC
Function:
cell scenario
type
Configuration Rule: network
planning
indicates the number of the
SF128 codes reserved for
OCNS (OCNS: Orthogonal
Channel
Source) .
Function:Noise
This parameter
Configuration
Rule:
indicates the starting code
The
value
the
indexlarger
of SFthe
=128
for is,
OCNS.
more
SF128
codes
are
(OCNS: Orthogonal Channel
reserved
as OCNS
code.
Noise
Source)
.
Configuration Rule:
first OCNS code index. The
OCNS code should not
collided with the existing
downlink physical channels.

At next use
At next use
At next use
At next use
At next use
At next use
At next use
At next use
In Most Case, the function is New Paging From

not needed
CN

New connection
deployment.
N/A
N/A
Take
Take effect
effect after
after
the
the change
change is
is
loaded
loaded to
to the
the
RNC
RNC if the
parameter
"CellReestabInd"
is set to " Not
Reestablish".
Take effect after
the cell is deleted
and setup again if
the parameter
"CellReestabInd"
is set to
"Reestablish".
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Configuration Rule: The video

service of CS 64 kbps occupy
many resources, it can control
the access of video service by
the switch. To turn on the
function, video service is
allowed to access, and the
user experience is good, but it
occupies many radio
resources.
To turn off the function, video
Function:
parameter
service is This
not allowed
to
indicates
access. MIMO pilot mode.
Configuration
If the operatorRule:
doesn't hope
It
should
set to P+P
unless
the
videobe
services'
access
for
VAM
is
supported
by
NodeB
some special
for
Function:
Thisscene,
parameter
example,
bathroom,
indicates whether
thethe
cell
function
should
be
supports F-DPCH. turned off.
Configuration Rule:
It should be set to
Function:
This
parameter
"Supported"
if the
cell
indicates
whether
supports F-DPCH.the cell
supports Enhanced F-DPCH
or not.
Configuration Rule:
It should be
setparameter
to
Function:
This
"Supported"
if the the
cell cell
indicates whether
supports
Enhanced
supports the 64QAMF-DPCH.
function
or not.
Configuration rule: Configure
according This
to whether
DL
Function:
parameter
64QAM
of the
the cell
cell is
indicateslicense
whether
purchased
by
the
operator.
supports the MIMO function
or not.
Configuration Rule:
It should be
setparameter
to
Function:
This
"Supported"
if the the
cell cell
indicates whether
supports
MIMO.
supports the CPC function or
not.
Configuration rule: According
to whether the operator has
Function:
purchasedThis
the parameter
CPC license
indicates
whether the cell
for the cell.
supports HSUPA 2ms TTI.
Configuration rule: Configure
according to whether 2ms ETTI
license
of the
cell is
Function:
This
parameter
purchased
by
the
operator.
indicates whether VAM is
Function:
supportedThis parameter
indicates
whether
STTD must
Configuration
Rule:
Function of
this
parameter:
it
be
activated
when
MIMO
It should
be
set
to the
indicates
whether
cell is
can
activated.
the
value
"Supported"
if the
cell is set to
active
the If
MIMO
and
'Bind',
MIMO
can
be
notsame
be
supports VAM.
downlink
64QAM at the
activated
unless
STTD
was
time in the radio link setup or
activated
The
function of this
reconfiguration,
.
Configuration
parameter:
thisRule:
parameterthe
is
It should
beofset
according to
the
Dual-Cell
HS-DSCH
throughput
HSDPA.
the
IoT
test
result.
most
Support
Indication,
and
If the
operator
turn Ifon
this of
the
UEs
do
not
require
should
beit set
to
function,
willaccording
increaseto
the
activate
STTD
and MIMO at
cell
capability
and
throughput of HSDPA
the
same time,
theoperator.
value of
requirement
from
.Otherwise
the
throughput
could
be
set
to
'Not
Bind'
The
involved
factor
setting
HSDPA is limited. for
this
parameter: Dual-Cell
HSSupt64QamInd
indicates the
DSCH
Support
of
cell supports
thecapability
64QAM in
the
cell, requirement from
downlink.MimoSuptInd
operator
indicates (commercial
the cell supports the
agreement)
MIMO function, but both the
Influence
of this set
parameter:
two parameters
to support
this
parameter
is the
do not
means the
cellDualcan
Cell
HS-DSCH
active
the MIMOSupport
and 64QAM
Indication,
in the radioand
link.is not
adjustable
parameter: this parameter is
The reason that the

on is to try best to provide
better user experience.
At next use
P-CPICH+P-CPICH is
compatible for most of the
cases.
Take effect after

the cell is deleted
and setup again.
N/A
Take effect for the

next call
N/A
Take effect for the

next call

whether DL 64QAM license
of the cell is purchased by
the operator.
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
Take effect after

the cell is deleted
and setup again.

whether the operator has
purchased the CPC license
for
the cell.
Default
value is set to
whether 2ms TTI license of
the cell is purchased by the
operator.
At next judgment
(i.e., shall not
affect ongoing
connections)
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC

Immediately
No
Yes
No
Yes
Yes
Yes
No
No
No
No
No
No
redirection is not performed,

and RRC connection can
continue to try to be setup on
the RACH/FACH ;
To turn on the function, when
RRC Connection Request to
be
setup
on
DCH/DCH
is
Main
function:
This
parameter
Function:
Used
for indicating
The
function
of
this
rejected
because
of
radio
defines
the
time
period
the
whether provide the
parameter:
This
parameter
resource
congestion,
RRC
UE
has
to
wait
before
redirection Information in
indicates
whether
the
Redirection
based
on the
repeating
the
accessing
RRC
Connection
Reject
downlink
Enhanced
value
of
the
parameter
request
procedure after UE
message.
CELL_FACH
beFor the
PriRedirectRat
is allowed.
receives
RRCcan
CONNECTION
Configuration
Rule:
supported
by
the
cell.
The
switch
is
recommended
REJECT.
operator that has interWhether
thisprocess
function
to
be on, to
when
RRC
Influence
factor:
the
frequency
oropen
inter-RAT
is
decided
by
operator
Connection
Request
to
be is
time
of
one
congestion
adjacent cell, if the switch
requirement
setup
onthe
DCH/DCH
is user
control;
of is
the
on,
when
thetime
RNC
The
involved
factor
for
setting
rejected
because
ofthe
radio
can
wait
toit access
overload,
can
make
UE
this
parameter:
DL
Enhanced
resource
congestion,
RRC
UTRAN;
cost.
redirect tosystem
inter-frequency
cell
CELL_FACH
capability
connection
can
continueoftothe
The
bigger the
parameter
is,try
or inter-RAT
cell.
cell;
requirement
to be
setupthe
on timer
thefrom
the
longer
of the
operator
(commercial
RACH/FACH,
can improve
user
waiting
toitaccess
the
Parameter
Function:
This
agreement)
the success
ratio of RRC
UTRAN
is.
Function
of
this
parameter:
it
parameter
whether
Influence
ofindicates
this
parameter:
connection.
The
smaller
the parameter
is,
indicates
whether
activating
the
uplink
Enhanced
This
parameter
indicates
the
shorter
theMIMO
timer
of the
Dual
Cellthe
and
the
CELL_FACH
isaccess
open.atthe
whether
downlink
user
waiting
to
same
time
in
the
cell.
Configuration
Rule:
It
is
Enhanced
UTRAN
is, CELL_FACH
however, the can
Factors
of
depend
onconsideration:
the
be
supported
byoperator's
the
cell. the
system
cost
may
beHSDPA
more
network
layout,
the
requirement.
Whether
to open this function
higher.
throughput
of operator
UEgets the
If
this
parameter
is
decided
by
This
parameter
should
When
the
parameter
is be
set to
value
0,
the
uplink
services
requirement
larger
than
the
process
timeof
"support",
cell
supports
the
the
users
on
CELL_FACH
Suggestion
for setting
this
of
one congestion
control.
Parameter
Function:
This
function
of activating
Dual
status
must
bearparameter
on whether
RACH.
parameter:
This
parameter
indicates
Cell
and
MIMO atgets
the the
same
If
this
parameter
indicates
the
the
cell
is whether
high
load
cell
or
time
in
the
radio
link
setup
value
1, the
uplink servicesor
of
downlink
Enhanced
not.
reconfiguration,
this
will
the
users
on
CELL_FACH
CELL_FACH
can
be
Configuration
Rule: The
increase
the
HSDPA
status
may
bear
common
supported
by
theon
cell,
and is
parameter
should
be
set
throughput
of
UE,
otherwise,
E-DCH,
and
it
will
support
not adjustable.This
function
according
to
the
load
cell
notrate.
support the
higher
data
can does
improve
FACH
condition
of the
cell.
function.
performance,
short RRC
When
this
parameter
is the
"1:
MimoSuptInd
indicates
The
parameter
wasn't
be to
setup
delay,
and
suggested
High
Load
Cell",
the
cell
supports
used
use
it by
as RNC.
soonthe
as MIMO
possible.
configuration
function and of the cell load
based
parameters
for
DcHsdschSupptIndisindicates
increasing
the
service
quality
the cell supports Dual Cell
to
increase
the
system
function, but both the two
capacity.
parameters set to support do
When
this parameter
"0:
not means
the cell canisactive
Normal
Load
Cell",
the
The
parameter
should
be
the MIMO and Dual Cell inset
configuration
the cell
load
based
on link.
the of
actual
network
the radio
based
parameters
is
suit
to
Function:
The parameter
requirement.If
"Close Load
normal
load
case,
in
that
indicates
typical
SCCPCH
Balance" is selected, there is
case,
service
quality
is better
configuration
scenarios.
For
no load
sharing
among
then
that
in
the
case
this
each
scenario,
the
carriers. If "Open Load cell
load
scenescene
is "1:
High
Loadis
corresponding
load
balance
Balance"is
selected,
there
Function:
parameter
Cell"
parameters
can
be
set
load
sharing
among
carriers.
for handover/reselectionas
If
the cellfactor:
always
in actual
high load
different
values.
Related
the
condition,
set
this
parameter
Configuration
Rule:
Based on
scene
withfollowing
the valuerequirement
"1: High Load
the
of
Cell",
else
the
value
of
this
the
operator:
the
opening
of
parameter
should
be
"0:
CBS,
MBMS;
the
rate
Normal
Load
requirement
ofCell".
thetoFACH
If
the cell
belongs
highcarrying
data,
thescene,
capability
mobility
outdoor
this
Function:
Cell
Radius
Scene
requirement
of
the PCH
of the
parameter
is
1;
Related
factor: the actual cell
cell.
If
the cell belongs to indoor
radius
If the
cell belongs to subway/
0:
[0~5]km
tunnel
scene, this parameter
1: [5~10]km
is
3;
2: [10~40]km
3: [40~140]km
4: [140~200]km
5: [200~ Infinity]km
The reason of the

At next use
to consider the success ratio
of RRC connection.

process time of one
congestion control; the time
of the user can wait to
access the UTRAN; system
cost.
Immediately
apply when UE
receives RRC
CONNECTION
REJECT.

Immediately

Immediately
N/A
Immediately
N/A
not update except

power on

according to the load
Immediately
condition of the cell.

Immediately
according to actual scenario.
Based on the following
requirement of the operator:
the opening of CBS, MBMS;
the rate requirement of the
FACH carrying data, the
capability requirement of the
PCH of the cell.
the actual scene is
default value.
the actual scene is

default value.
Immediately at
commit.
Immediately
Immediately
No
Yes
No
No
No
No
No
No
No
Yes
No
random access
Reduced
service is
outage
If this parameter
set to "0",
period
after
cell
reselection
the available subchannel
and
channel
switching,
numbers
maytype
be less
than
by
a networkthe
theintroducing
AvailSubChanNum,
option
to allow
the UE
probability
of node
B to send
message
on RACH
or act on
receiving the
same signature
received
message
on FACH
will be bigger,
the access
time
before
complete
of random
accessreading
will be of
SIB11/SIB11bis/SIB12.
If the
longer.
system
block is large,
If this parameter
is setthe
to "1",
deffered
system
information
the available
subchannel
reading
can
be taken into
numbers
is
the
The
function of this
account.
AvailSubChanNum,
the
It's
a network
parameter:
This parameter
Function:
deffered
system
probability
of
node
B
Planning&optimization
indicates
thereading
configuration
information
switch
receiving
the
same signature
parameter.
The
index
of
the
admission
control
Configuration
Rule:
access
will
be
smaller,
the
access
recommendation
is:on the
parameters
based
delay
time
ofPriority.Different
random
accesscell
will be
the cells
which support
Basic
If the parameter
value
is "0",
shorter.
R99+R5+R6
have
higher
can
use this
parameter
to
deffered
SIB
reading
not
It
should
be set
to 0
ifisthe
cell
priority
than
those
support
index
different
access
control
used.
radius
is
larger
than
R99
only;
parameters
according
to
If
the
parameter
is "1",
200KM.Otherwise,
ithigher
is
the
larger
cells
has
operator's
requirements.
deffered
SIB
reading
is 1used,
suggested
tothe
be smaller
setfor
as
priority
than
ones.
The
involved
factor
setting
which
will
reduce
system
Function:
This parameter
this
parameter:
admission
information
time and
indicates
thereading
Scheduling
control
parameters
for cell
access
delay.
Priority
configuration
index
Influence
of this parameter:
used
for
congestion
index of the admission control
scheduling.
several
parameters There
based are
on the
different
sets of
configuration
Basic Priority,
and
is not
of
the
Scheduling
The
function
of thisPriority
adjustable.
configured
in
level
and
parameter:
Application
priority
SuggestionFunction:
forRNC
setting
this
Parameter
This
different
cells
canof
use
this
index
used
in
congestion
parameter:
index
the
parameter
indicates
the
DN
parameter
to index
the
control.Different
cell
can
use
admission control
parameters
(Distinguished
Name)
refers
different
sets
of
the
this
parameter
to
index
based
on the Basic
Priority,
to
the application
priority
configuration
separately.
different
congestion
control
and
is not
adjustable.
profile.
Load
control
priority of
parameters
according
to
different cell can refer to
Parameter
Function:priority
maximal
operator's
requirements.
different application
allowed
Non-VIP
CSfor
user
The
involved
factor
setting
profile.
number
when
VIP
user
exists
this parameter: Application
Configuration
Rule:
Priority index in
cell VIP
usedusers
for
performance,
Congestion. non-VIP user
performance
Influence ofFunction:
this parameter:
Parameter
maximal
The
larger
ofPriority
the parameter,
Application
allowed
Non-VIP
PSindex
userin
the
Non-VIP
CS users
cell more
usedwhen
for
Congestion,
and
number
VIP user
exists
can
be
online
in
the
cell users
when
is
not
adjustable.
Configuration Rule: VIP
VIP
exists and
the
lessthis
Suggestion
fornon-VIP
setting
performance,
user
probability
VIP preempt
parameter:that
Application
Priority
performance
Non-VIP
CS
users;
indexlarger
in cell
forthe
The
ofused
the parameter,
smaller
the
parameter,
the
Parameter
Function:
This
Congestion,
and
isPS
not
the
moreofNon-VIP
users
less
Non-VIP
CS
users
can
parameter
is
the
dual
cell
adjustable.
can
be online in the cell when
be
inand
thethe
cell
when VIP
HSUPA
support
indication
VIPonline
exists
less
exists
and
the
more
andshould
be
set
according
probability that VIP preempt
probability
that
VIP
to
cell capability
andpreempt
Non-VIP
PS
users;
the
Non-VIP
users;
requirement
operator.
smaller ofCS
thefrom
parameter,
the
Configuration
Rule:
Dualcan
cell
less Non-VIP PS
users
HSUPA
capability
of
be onlinesupport
in the cell
when VIP
function
of
this
parameter:
the
cell,
requirement
from
exists and the more
This
parameter
indicates
cell
operator
(commercial
probability
that VIP
preempt
switch
of
EUTRAN
nbr
agreement)
Non-VIP PS.users;
blacklist
management.
Adjustment
Suggestion: This
Factors
of consideration:
parameter
is the dual cell user
experience
and network
HSUPA support
indication,
feature.
If cell
need to support
and is not
adjustable.
EUTRAN nbr blacklist
management , this parameter
is set 1, otherwise 0.
Make use of the available

subchannel resource of
PRACH and the cell radius
always is above 200km
Access delayl is taken into

When system
information type 5
is changed.and
Take effect after
the Common
Transport
Channel
Reconfiguration
When system
information is
changed
N/A
Immediately
Index
Immediately
The default value is set for

the Scheduling Priority
configuration index used for
congestion scheduling.
At next judgment
(i.e., shall not
affect ongoing
connections)
N/A
At next use
Index
Immediately

When best cell is
changed
user performance.
When best cell is
changed
user performance.
Immediately

Next
measurement
planning and user experience control
No
No
No
No
No
No
No
No

parameter
is of
thethis
DN
The function
(Distinguish
Name)
of
MPOProfile.
indicates
the maximum
number of HS-DSCH users in
the cell. It will be guaranteed
by admission control
mechanism.
this parameter: the maximal
HSDPA user number that
NodeB
can support
The
function
of this in one
cell
parameter:
This parameter
Influence the
of this
parameter:
indicates
maximum
the larger
the value,
number
ofof
E-DCH
usersthe
in
more
of HSDPA
can
the cell.
It will beusers
guaranteed
admit
in the cell;
the less of
by
admission
control
the value, the less of HSDPA
mechanism.
usersinvolved
can admit
in the
The
factor
for cell;
setting
Suggestion
for setting
this
this
parameter:
the maximal
parameter:
set to that
the
E-DCH
userIt's
number
maximalcan
HS-DSCH
NodeB
support traffic
in one
number
thatFunction:
NodeB can
cell
Parameter
This
support
in
one
cell.
Influence
of
this
parameter:
parameter indicates
the start
the
the value,
timelarger
of theofswitching
offthe
more of E-DCH
users can
frequency
period.
admitparameter
in the cell;
less
Configuration
Rule:
a of
This
isthe
anIt's
object
the
value,
the
less ofunder
E-DCH
network
identity.
It is
unique
its
users
admit in the cell;
planning&optimization
parentcan
object
Suggestion
forwe
setting
this
parameter, so
can change
parameter:
It's
set
to
the
the value according to the
maximal
E-DCH user
actual
condition.
The number
that NodeBcan
canbesupport
in
frequency
switched
Parameter
Function:
This off
one
cell.
during
the
time
when
the
parameter indicates the end
throughput
of the celloff
always
time of the switching
is
small.
frequency period.
If
the value of Rule: It's a
Configuration
closeFreFunSwit
is "0", this
network
parameter
is
invalid.
For
frequencies
cannot
parameter,
so wewhich
can change
be
closed
the value according to the
(FreCloseAllowedInd=0)
Parameter
Function:
actual condition.
The This, the
start
and
end
time
are
parameter
indicates
the UEoff
frequency can be switched
required
to
be
the
union
number
threshold
of
during the time whenswitching
theof all
its
co-cover
neighboring
cells'
off
frequency
throughput
of intelligently
the cell always
which
can
be
closed
when
multi-carrier is used.
is small.
. If
Configuration
If the value of Rule: It needs
there's
no
special
to
satisfy
the
requirement
of
closeFreFunSwit is "0", this
requirement,
to
simplify
the
power
saving
and
service
parameter is invalid.
configuration,
allwhich
the co-cover
quality.
For frequencies
cannot
cells
with
the
same
startsmall,
time
If
parameter is too
bethis
closed
(StartTimetoClsF)
and
end
it(FreCloseAllowedInd=0)
would be hard to switch, off
the
time
(EndTimetoClsF)
are not
This
parameter
is configured
the
and
it could
startfrequency,
and end time
are
recommended.
to
avoidthe
the
condition
that
satisfy
ofof all
required
torequirement
be
the union
unmeant
change
of
the
power
saving.
its co-cover neighboringcell
cells'
load
trigger
If
thiswould
parameter
isthe
too big, it
which
can be
closed
frequency
open/close.
would
be easy
to switch off
. If
The
bigger
thisand
parameter
the
frequency,
it wouldis,
there's
no special
the
more the
difficult
to
increase
load
oftrigger
other
requirement,
to simplify
the
frequency
open/close.
frequency
with
same
configuration, all the co-cover
But
the value
of this
coverage
obviously,
and time
it
cellsifwith
the
same
start
parameter
is
too
small,
the
would
affect
the
service
(StartTimetoClsF) and end
unmeant
change of theare
cell
quality.
time (EndTimetoClsF)
load
would
trigger
the
If
the value of
recommended.
frequency
open/close
closeFreFunSwit
is "0", the
mistakenly.
UeNumThreshCls is invalid.
N/A
Immediately
It's set to the License Value

of the cell.
Immediately
It's set to the License Value

of the cell.
Immediately
N/A
Cann't Modify
From the 10: 00 p.m. to the

next morning 7: 00 a.m., the
throughput always is small.
Immediately
From the 10: 00 p.m. to the

next morning 7: 00 a.m., the
throughput always is small.
Immediately

Immediately
the requirement of power
saving and service quality.
condition that unmeant
reduction of the load would
Immediately
trigger the frequency switch
off, and it satisfy the
requirement of power saving.
Yes
No
No
No
No
No
No
Yes
No
Yes
No
Yes
network
parameter, it needs to
consider the actual need.
The value "0" only consider
the time, it will switch on the
It's
a network
switched
off frequency on
time.
parameter,
The
valueMaximum
"1" meansBit
it will
Function:
Rate
The
value
"0:
based on
the
switch
on
the
switched
off
Parameter
Function:
This
on
DL
DCH
for
RT
PS
RAB
in
user
number
on
CELL_DCH
frequency
only
when
the
parameter
indicates the time
Serving
Cell.
state
to for
switch
off frequency.
working
cellswitching
is Rule:
congestion.
interval
the
Configuration
Itoff
needs
The
value
"1:
based
the
The
value
"2"
consider
frequency
again
afteronthe
to
consider
the
transmission
cell
load
toonswitch
offworking
time
or Whether
switching
it.
bandwidth
of
Iub,the
the
user
frequency,
which
is
to
cell
is congestion.
Ifonly
one
of
Configuration
Rule:
ItBit
needs
Function:
Maximum
Rate
experiences
and
the
satisfy
the
basic
QoS
the
condition
is
satisfied,
thein
to
avoid
the
frequency
be
on
UL
DCH
for
RT
PS
RAB
successful
call
requirement
of ratio.
usersfrequently.
switched
off
frequency
should
opened
and
closed
Serving
Cell.
The
reason of
the adding of
(GBR/NBR)
be
Andswitched
it needs.on.
toRule:
consider
Configuration
It needs
this
parameter
used
forthe
the
If
the
value the
ofof is
If
the
value
of
requirement
power
saving.
to
consider
transmission
scene
of
very
limited
CloseFreFunSwit
istoo
"close",
closeFreFunSwit
"0",
the
If
the parameter
small,
bandwidth
of bandwidth
Iub,isis
the
user
transmission
of Iub
Function:
Maximum
Bit
Rate
the
CloseFreAlg
is
invalid.
OpenFreAlg
is
invalid.
the
frequency
might
be
experiences
and
the
to avoid
many
users'
bad
user
on
E-DCH
for NRT
PS
RAB
in
opened
and
closed
successful
call
ratio.frequently.
experiences
because
of some
Serving
Cell.
If
thereason
parameter
is adding
too
big,ofthe
The
of Rule:
the
user's
high bit
rate
inIt the
Configuration
needs
frequency
could
not
be
closed
this
parameter
is
used
for
the
same
cell.
to consider the transmission
for
a long
time
after
it user
was
scene
of very
limited
The
value
of
this
parameter
bandwidth
of
Iub,
the
Function:
Maximum
Bit
opened,
and
itbandwidth
could
notRate
meet
transmission
of
Iub
is
larger,
the
rate
to
be
experiences
and
the
on
E-DCH
for
RT
PS
RABuser
in
the
requirement
of
power
to
avoid
many
users'
bad
allowed
is higher,
and the
successful
call ratio.
Serving
Cell.
saving.
experiences
because
ofbetter,
some
user
experience
is
also
The
reason
of
the
adding
of
Configuration
Rule:
It the
needs
user's
high
bit
rate
in
but
it
is
also
easier
to
this
parameter
is
used
for
the
to
consider the transmission
same
influence
other
users'
traffic
scene cell.
of very
limited
bandwidth
of
Iub,
the
user
The value of this
parameter
is
quality.
transmission
bandwidth
of Iub
experiences
and
larger,
the
rate
to the
be allowed
The
value
of
this
parameter
is
to
avoid
many
users'
bad
user
successful
callthe
ratio.
is
higher,the
and
user
smaller,
rate
to
be
allowed
experiences
because
of
some
The
reason is
ofalso
the adding
of
experience
better,
but
is
lower,
andbitthe
successful
user's
high
rate
in the
this
parameter
is
used
for
the
itsame
is also
easier
to
influence
call
ratio
is
also
higher,
but
cell.
scene
of
very
limited
other
users'
quality.
the
experience
is also
Theuser
value
oftraffic
this
parameter
is
transmission
bandwidth
of Iub
The
value
of
this
parameter
is
worse.
larger,
the
rate
to
be
allowed
to
avoid
many
users'
bad
user
smaller,
the
rate
touser
be allowed
is
higher,
and
the
experiences
of some
is
lower, andisbecause
the
successful
experience
also
better,
but
user's
high
bit
rate
in
the
call
ratio easier
isDL
also
higher,
but
itsame
is also
to
influence
Function:
Controlled
MBR
cell.
the
user
experience
is also
other
users'
quality.
Switch.
The
value
oftraffic
this parameter
is
worse.
The value
this
is
Configuration
Rule:
turn on
larger,
the of
rate
to parameter
beTo
allowed
smaller,
the
rate
be allowed
the
function,
the
MBR
of CN
is higher,
and
theto
user
is
lower, andiscan
the
successful
assignment
be
modified,
experience
also
better,
but
ratio
is
also
higher,
but
itcall
is
mainly
used
for
some
it is also easier to influence
Function:
Used
forquality.
the
MBR
the
user
experience
is also
testing
scene..
other
users'
traffic
value
in
the
DL
Controlled
worse.
To
turn
off
the
function,
the is
MBR
function.
MBR
of CN
can't
smaller,
the assignment
rate to be allowed
The
value
of this
parameter is
be
modified.
is lower,
and
the successful
larger,
theisMBR
after modified
call
ratio
also
higher,
but
Function:
UL
Controlled
MBR
is
larger.
the
user
experience
is
also
Switch.
The
value of this parameter is
worse.
Configuration
Rule:
To turn on
smaller,
the MBR
after
the
function,
the MBR of CN
modified
is
smaller.
Function:
This
assignment
canparameter
be modified,
indicates
the
switch
of the
it is mainly used
for some
Cell
Restriction.
If
this
Function:
Used for the MBR
testing scene..
parameter
isUL
"Close
Cellthe
value
thethe
Controlled
To turninoff
function,
Restriction
by
OMCR"
MBR
function.
MBR of CN assignment, the
can't
cell
closes
thethis
cellparameter
restrictionis
The
value of
be modified.
function.
this parameter
is
larger, theIf MBR
after modified
"Open
Cell
Restriction
by
is larger.
OMCR"
, the
cell parameter
opens the is
The value
of this
cell
restriction
function.
smaller,
the MBR
after If this
parameter
"Open and
modified is issmaller.
Close Cell Restriction
Dynamically by RNC" , the
cell dynamically opens or
closes the cell restriction
according to the load of
uplink.
Configuration Rule:
to 0 if it is not necessary to
bar the cell. And it should be
The value "2" consider the

time or Whether the working
cell is congestion. If one of
the condition is satisfied, the
switched off frequency
should be switched on.
The value "0" consider the
user number in CELL_DCH
state only to switch off the
frequency.
frequency be opened and
closed frequently, and it
power saving.
The reason of the
user experience.
Immediately
Immediately
Immediately
At next use
The reason of the

user experience.
At next use
The reason of the

user experience.
At next use
The reason of the

user experience.
At next use
The reason that the

the parameter is off is
because the function is only
used in some testing scenes
The default value of the
based on the maximum bit
rate of single user can realize
with 64QAM
The reason that the
the parameter is off is
because the function is only
used in some testing scenes
The default value of the
based on the maximum bit
rate of single user can realize
without 16QAM
The default value turn off the
cell bar function. If the cell
bar function is required to
start, 1 or 2 should be
selected according to
configuration rule.
At next use
At next use
At next use
At next use
Take effect after

the change is
loaded to the
RNC
No
No
No
Yes
Yes
Yes
No
Yes
No
No
indicates whether Cell

Restriction operates in the
method of "Polling" . If this
parameter is set to "Polling" ,
the cell periodically performs
AC (Access Class) restriction.
If the parameter is set to "Not
Polling"
performs AC
Function:, the
Thiscell
parameter
restriction
according
indicates the numbertoofthe AC
barred
OMCR.
Barred in
ACthe
(Access
Class) in
Configuration
Rule:when cell
one polling period
If
the valueoperates
is set to in
"Not
restriction
the
Function:
This parameter
Polling",of
specifed
Acs
could
method
"Polling"
.
indicates
the
polling
period
be
bared to the
cell.
Configuration
Rule:
when
the CS/PS
domain
Otherwise,
all
ACs
are
The
larger
the value
is,bared
the
DSAR
(Domain
Specific
periodically.
more
ACs
are
barred
for
Access Restriction) or celleach
period
when
the DSAR
restriction
operate
in theis
started. ofservice
Function:
handover
method
"Polling"
.
indicator
Configuration Rule:
The
this is, the
Related
factor:
The function
larger
theofvalue
parameter:
This
The
parameter
is
"ON"
to
larger
the periodparameter
of
barring
If
the parameter
set
as "True",
indicates
the
transport
band
control
service
allocation
in
the ACs
when the
DSAR
cell
reselection
based
on is
width
allocated
for
Downlink
UMTS
or
GSM.
For
example,
started which
leads
to larger
absolute
priority
is used.
Enhanced
CELL_FACH
which
AMR
istoinupdate
GSM
and
PS
data
period
thepriority
SIB3.
Function:
absolute
cell
can
be used
for Downlink
service
is inswitch
UMTS.
reselection
Enhanced
CELL_FACH
If
the parameter
is "Off", only.
Configuration
Rule:
The
involved
factor
for to
setting
service
handover
strategy
If
the parameter
isof
set
Function:
prioritythe
inter- "0",
this
parameter:
transport
doesn't
perform.
cell
reselection
based on
frequency
and
inter-RAT
band
width
requirement
of
absolute
priority
is not used.
handover Enhanced
Downlink
If the parameter
is set
to "1",
Configuration
Rule:
network
CELL_FACH
cell
reselection based on
planning
Influence
of this parameter:
absolute
priority
is used. In
If
only
inter-frequency
This
parameter
indicates
the
cell
reselction
from
UMTS
handover
is expected,
this to
transport
band
width
allocated
LTE
scenario,
this parameter
parameter
is Enhanced
"1".
for
Downlink
must
be
set"1".
If only inter-ratthe
handover
CELL_FACH;
larger ofis the
expected,
this parameter
is
value, the more
of transport
"2".
band width that can be used
If
inter-frequency
handover is
by
Downlink
Enhanced
Function:
E-FACH
DRX
expected
in
priority,
this
CELL_FACH,
and the
larger
Support
Indication
in Cell.
parameter
is
"3".
throughput that
be enjoyed by
Configuration
Rule:
users
Enhanced
To turnbeared
on theon
function,
it can
CELL_FACH;
the
less of the
save the battery consumption
value,
less of transport
for UE the
in E-FACH
state, but it
band
width
that canthe
be user
used
also may influence
by
Downlink
Enhanced
Function:
Choice
Strategy
in
experience because of DRX.
CELL_FACH,
the less
Multi-RAT
To
turn off Handover
the and
function,
it can't
throughput
that the
be
enjoyed
by
Related
actual net
save thefactor:
battery
consumption
users
beared
on
Enhanced
planning
for UE in E-FACH state.
CELL_FACH;
This
parameter indicates
Function:
Adding
New
Radio
Suggestion
for setting
which
inter-RAT
will
bethis
Link
judgment
parameter:
ThisSwitch
parameter
chosen
in priority
for
Related
the actual
net
indicatesfactor:
the
transport
band
handover
in multi-RAT
planning
width
allocated
for
Downlink
scenario.
When
radioCELL_FACH,
link with bad
Enhanced
signal
quality can
bethe
added
in
which should
match
traffic
activeset,
thisdefault
parameter
is is
planning; the
value
set
1 to improve
suggested
to set soft
if no
hanodver
success rate.
peticular requirement.
It could be set to 1 if the

DSAR function is paid,
otherwise it should be set to
0.
Take effect for the

next new DSAR
procedure
Take effect after

In order not to affect the user
the change is
experience too obviously, 2 is
loaded to the
set to the default value.
RNC
It is set to 60 seconds to
reduce the RNC burden,
Take effect for the
because DSAR function will
next new DSAR
update the system
procedure
information for all the cells
periodically.
When best cell is
changed
deployment.

When best cell is
changed
deployment.
Network planning is taken

When best cell is
into account in default value. changed

according to service
At next use
planning.
The reason of the
user experience.
Immediately

default value.
Immediately

default value.
Immediately
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
reserved parameter

Immediately
value equal 0
No
Parameter
Function: This
reserved parameter
shield period used in uplink
algorithm.
reserved
Parameter
Function:
This
relative toparameter
the
parameter
parameter
timeDelay, indicates
The valuepower
of
offset
for downlink
DPCH
coverPrd
must bigger
than
Parameter
initial
powerFunction:
calculation
when
the round-trip
time, It This
means
parameter
indicates
power
RAB
or
SRB
setup.
that the value of coverPrd
offset
for downlink
DPCH
Configuration
Rule:
It needs
must bigger
than
double
of
initial
power
calculation
to
consider the rate of when
timeDelay.
soft
or softer
handover.
success
RABis
ortoo
SRB
If parameter
big,setup
it will
Configuration
Rule:
It needs
and
system
capacity.
waste the time of SIRtarget
to
consider
the
of new
If
this
parameter
is too
big,
adjustment,
andrate
make
radio
link power
downlink
successful
the
initial
when
RAB or
SIRtarget
adjust
too
slowly.
Parameter
Function:
This
synchronization
soft
or
SRB
wouldwhen
too
big,
And
ifsetup
parameter
isbetoo
small,
parameter
indicates
power
softer
handover,
and
it
also
ititParameter
could
high rate
ofthe
mightforhave
bedownlink
smaller
than
Function:
This
offset
DPCH
needs
to
consider
system
success
RAB
or
SRB
setup,
double
of
timeDelay,
the
parameter
power
initial
powerindicates
calculation
capacity.
but
it would
reduce
the when
result
of
SIRtarget
adjustment
offset
for
downlink
DPCH
RAB
hard
handover.
If
thetime
parameter
isbeen
too big, the
system
capacity.
last
hadcalculation
not
initial
power
when
Configuration
Rule:
It needs
initial
power
when
soft
or
If
this
parameter
is
too
small,
reflected
in.
SRB
hard
handover.
This
to
consider
the rate
of RAB
RAB
softer
handover
would
be too
the
initial
power
or
parameter
also
iswhen
used
to
success
hard
handover
and of
big,
it
would
make
high
rate
SRB
setup
would
be
too
calculate
F-DPCH
initial
system
capacity.
new
radio
link downlink
small,
itwhen
would
reduce hard
the rate
power
F-DPCH
If
this
parameter
is
too big,
successful
synchronization,
of
success
RAB
or
SRB
handover.
the
initial
when
RAB
Parameter
Function:
This
but
it alsopower
make
the power
setup.
Configuration
Rule:
Itpower
needs
hard
would
be
parameter
indicates
wastehandover
and reduce
the
celltoo
to
consider
the
rate
of rate
SRBofor
big,
it could
have
high
offset
for downlink
DPCH
capacity.
F-DPCH
success
hard
RAB
success
hard
handover,
initial
power calculation
when
If the parameter
is too small,
handover
and
system
but
it re-establishment.
would
reduce
thesoft or
RAB
the initial
power
when
capacity.
system
capacity.
Configuration
Rule:
It needs
softer handover
would
be too
If
this
parameter
is
big,
If
this
parameter
is too
too
small,
to
consider
themake
rate
oflow
small,
it would
rate
the
initial
power
when
SRB
the
initial
power
RAB or
success
RAB
re-when
of new
radio
link
downlink
F-DPCH
hard
handover
hard
handover
would
be too
establishment
and
system
successful
synchronization.
would
be
too
big,
it could
small,
it
would
reduce
the rate
capacity.
have
high
rate ofhard
SRB
Fofthis
RAB
success
If
parameter
is
too or
big,
DPCH
success
handover.
the
initial
power hard
when RAB
handover,
but it would
re-establishment
wouldreduce
be too
the
system
capacity.
big, it could have high rate of
If
this parameter
success
RAB re- is too small,
the
initial
powerbut
when
SRB or
establishment,
it would
F-DPCHthe
hard
handover
reduce
system
capacity.
would
be too small,
it would
If this parameter
is too
small,
reduce
the
rate
of
SRB
or Fthe initial power when RAB
DPCH
success
hard
re-establishment would be too
No
No
No
No
No
No
No

Immediately
value equal 0

Immediately
value equal 0
The round-trip time usually

about 4~5 frames, so the
Ongoing
default value of CoverPrd is 6 connection
frames.
the rate of success RAB or
SRB setup and system
capacity.
the rate of new radio link
downlink successful
synchronization when soft or
softer handover, and system
capacity.
the rate of RAB success hard
handover and system
capacity.
the rate of SRB or F-DPCH
success hard handover and
system capacity.
the rate of success RAB reestablishment and system
capacity.
Next
radiosetup
link
Next Cell
setup or addition
for following
condition: soft or
softer handover in
SRNC, add RL
with RAB on
Next
radio
DPDCH
or link
RL
setup
for following
with F-DPCH
condition:
RAB
transmission
but
Next
radio
link in
hard
handover,
without
service
setup
incoming
DRNC.for following
condition:
Relocation,
DPDCH
with
SRB
service on
FACH
hard
handover
or PCH transferorto
F-DPCH
hard
DCH.
handover in
SRNC, add RL
with SRB on
DPDCH or RL
with service and
Next
radio link
F-DPCH
setup
for RABinretransmission
establishment
DRNC.
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
Yes
controlling whether the

The
function ofCAC
this function is
RTWP-based
parameter:
Cell
Downlink
turn on.
Admission
Control
The involved factorSwitch,
for setting
Controlling
the the
this
Whether
The parameter:
functionwhether
of this
downlink
power-based
CAC is
RTWP-based
CAC
function
function,
HSDPA
Throughputturn
on.
indicates the maximum Users
based
CAC
function
and
Influence
this
parameter:
If
Number
ofofthe
The
function
ofRRC
this
wlashcode-reservation
CAC
the
value
is
"open",
RTWPSignalling
only
in
CELL_DCH
parameter:
parameter
function
areThis
turnthe
on Cell
based
CAC
function
is turn
state
Co-Existin
and
indicates
the
nominal
The
involved
factor
forpath
setting
on;
If
the
value
is
"closed",
the
value
of
255
means
the
loss.
It is used towhether
predict the
the
this
RTWP-based
is
The parameter:
function
function
is off.ofCAC
Ifthis
thefunction
new
power
increasement
of
new
downlink
power-based
CAC
turn
off;
parameter:
Cell
HSDPA
"RRC
setup
request"
setup
downlink
service
request
in on
function
and
wlashcodeSuggestion
for
setting
this
throughput
Admission
Control
CELL_DCH
state
and when
the
call
admission
control
reservation
CAC
function
are
parameter:
uplink
CAC
Switch,
whether
value
ofindicating
thisThe
parameter
iscan
not
no
valid
pathloss/RSCP
turn
on
function
is
suggested
to
be
HSDPA
throughput
based
equal
to
255,
the
following
be
got. of this parameter:
Influence
closed
RTWP
fluctuating
CAC
is for
open
or
forthe
the
judgment
will
beclosed
done:
If
The
involved
factor
for setting
To
avoid
cell
overload,
acutely
which
may
lead
error
cell parameter:
new
"RRC setupthe
request"
this
value
of
downlink
access
control
CAC
judgment.
The
involved
forstate
setting
setup
on CELL_DCH
downlink
initialfactor
transmit
power
switch
(DlCacSwitch)
should
this
parameter:
Performance
will
lead
the
number
of
The
function
of
this
(DL
OLPC)
,
success
rate
of
Theset
function
of this
be
to "1:
open"
of
HSDPA
traffic
insuccess
the cell
signalling
users
exceed
this
parameter:
This
parameter
service
setup
and
parameter:
this
parameter
Suggestion
for
setting
this
Influence
of
this
parameter:
threshold,
this
new
"RRC
indicates
the
original
rate
of downlink
access.
indicates
the
Maximum
parameter:
To
avoid
cell
For
good
performance
of is
setup
request"
will
not
be
background
noise,
which
Influence
this
parameter:
Number
ofof
Users
can
be
overload,
downlink
access
HADPA
traffic
in
the
cell,
Cell
accepted
on
CELL_DCH
the
default
configuration
of
The
larger
value
of
the
function
of(DlCacSwitch)
this
carried
on Downlink
control
switch
HSDPA
throughput
Admission
state,
and
it
will
attempt
on
background
noise
when
cell
is
parameter,
the
larger
of
the
parameter:
Background
Noise
Enhanced
should
be
setthis
tobe"1:
open"
Control
should
opened.
FACH;
else,
new
"RRC
setup.
predicted
increasment
of
Automatic
Adjustment
Switch
CELL_FACH.When user
setup
request"
can
This
parameter
will
take
effect
transmit
power,
the be
higher
The
involved
factor
for setup
setting
number
on
DOWNLINK
on
CELL_DCH
state.
when
the
cell
is
setup;
success
rate CELL_FACH
of Whether
radio link to
this
parameter:
ENHANCED
The
involved
factor
for
setting
This
parameter
will
take
effect
setup,
the
higher
congestion
switch
on the
function
(HS-DSCH
channel
in of
this
parameter:
Access
when
the
"Background
Noise
rate
of
radio
link
setup;
The
function
of
this
Background Noise
CELL_FACH
state)Automatic
success
rate
ofless
RRC
Automatic
Adjustment
Switch"
otherwise,
the
of
the
parameter:
This
parameter
Adjustment
(Dedicated
H-RNTI
insetup
request;
pre-emption
of
"RRC
is
changed
from
"
Off"
to
"On"
predicted
increasment
of
indicates
the
reference
SF
Influence
of
this
parameter:
ENHANCED CELL_FACH
setup
request"
to
service,
ifThis
theparameter
cell
is already
setup;
transmit
power,
the
less
layer,
which
indicates
the
be set
state
Allocated
)should
is over
RNC
CPU
cost.
This
take
effect
success
rate
of will
radio
link
reserved
codes
for the
cell
is
to
"1:parameter
open"
always,
because
DLEFACHUserNum,
then
Influence
of
this
parameter:
when
the
"Background
Noise
setup,
the
less
congestion
for
service
corresponding
the the
Uplink
load
(RTWP)
DOWNLINK
ENHANCED
The
larger
oflink
the
value,
the
Automatic
Adjustment
rate
of
radio
setup.
to
the
reference
SF
layer.
threshold
are
relative
toSwitch"
cell
CELL_FACH
reject
any
new
less
possibility
that
the
RRC
is
changed
from
"On"
to
"Off"
Suggestion
for
setting
this
This
parameter
is
used
in
the
base
noise
(dB
Value)
,
so
the
service; else, DOWNLINK
SETUP
be
CAC
refused
on
ifveracity
the
cell
is
already
setup.
parameter:
the
average
admission
control
algorithm
of
cell
base
noise
is
ENHANCED CELL_FACH
CELL_DCH;
The
less
ofsetting
the
The
involved
factor
for
pathloss
ordinary
scene
in
based
onofcode
tree
reserved
very
important
for
the
cell
can
access
new
service.
This
value,
,
the
more
possibility
to
this
parameter:
The
verocity
network
should
be
set.
ratio,
incapacity
order
toand
reserve
uplink
parameter
should
be
set some
be
refused.
Parameter
Function:
This
of
cell
background
noise
codes
(CodeTreeResRto)
for
performance
according
DL EFACH
Suggestion
for
this
parameter
indicates
the
when
the
value
of
users
of certain
higher-priority
Suggestion
for setting
setting
this
CAPACITY
Requirement.
parameter:
This
parameter
is
DPCH
power
control
BckNoiseAdjSwh
is
"Closed".
service.
These
two
parameter
parameter:
This
parameter
used
to
solve
the
network
preamble
length.
Influence
of
this
parameter:
cooperate
to
calculate
the
should
be
set
to
"1:
open"
this parameter: the Maximum
optimization
problem
in
Configuration
The
value
The
verocity
ofRule:
cell
reserved
codes
number
of
the
always,
Number
of
Users
can
beLybia
in
which
more
than
ten
of
this
parameter
should
background
noise
when
the
reference
layer.
carried on SF
Downlink
thousand
RRC
ensure
DPDCH
power
is
value
ofthe
BckNoiseAdjSwh
is
The
involved
factor for
setting
Enhanced
CELL_FACH
CONNECTION
REQUEST
suitable
at
the
beginning
of
"Closed"
which
this
parameter:
code
resource
exit
per refused
15ofminutes
inofone
the
data
Suggestion
for
this
access
rate
higherthe DPDCH
larger
thesetting
parameter,
cell.
In
ordinary
network,
that
transmission.
parameter:
If theuse
value
priority
service;
rate
the
more
Users
can
be ofof
scene
will
not
happen
and
If
this
parameter
is
too
big,
BckNoiseAdjSwh
is
"Closed",
code
resource
carried
on Downlink
Parameter
Function:
This
to
the
DPDCH
transmission
is a
this
parameter
should
be the
set
Influence
ofCELL_FACH;
this
parameter:
Enhanced
parameter
indicates
the
SRB
larger
value
to
avoid
RRC
not
begin
while
the
DPCCH
to
the
RTWP
value
of
the
The
more
of
the
reserved
less
of the parameter, the cell
delay.
CONNECTION
limited.
power
isthe
already
inthe
aload
suitable
when
the
cell
null
toon
codes,
less
of
code
less
Users
canis
be
carried
Configuration
Rule:
The
value
level,
it
waste
power.
guarantee
the
RTWP-based
using
ratio
and
less
cell
Downlink
Enhanced
of
thisand
parameter
should
If
this
parameter
too small,
CAC
E-DCH
capacity,
and
the ismore
of the
CELL_FACH.
ensure
the
DPDCH
power
itscheduling.If
might
begin
DPDCH
the
value
of is
code
refused
ratio
for
high
Suggestion
for
setting
this
change
to a suitable
level
transmission
at
a
low
power,
BckNoiseAdjSwh
is "open",
priority
users
in larger
high-load
cell;
parameter:
the
of the
before
sending
RB0~RB4
and
it
might
make
the
BLER
this
parameter
can
be
The
less
of
the
reserved
parameter,
the
more
Users
message.
And
it needs
to
high
in the
beginning
neglected.
codes,
the
more
theofcode
can
be
carried
onofdelay
Downlink
consider
the
time
DPDCH
transmission.
using
ratio CELL_FACH;
and more cellofthe
Enhanced
RB0~RB4
message.
But
ZTE
RNC
hasless
configured
capacity,
the
of
the
less
ofparameter
theand
parameter,
the
If
this
is
toohigh
small,
the
parameter
of
srbDelay,
it
code
refused
ratio
for
less
Users
can
be
carried
on
Function:
Thisto
parameter
itcan
might
begin
send
run
power
control
to
priority
users
in high-load
cell.
Downlink
Enhanced
indicates
whether
UL16QAM
RB0~RB4
message
atthis
a low
several
RFs
before
Suggestion
for
setting
CELL_FACH.
it's
set
to
the
is
open
or
closed
in
the
RNC.
power,
and set
itsignalling,
might
make
transmitting
thatto
parameter:
according
Maximum
Number
ofAccording
Users
Configuration
Rule:
message
be
decode
improve
the
radio
link
quality
operator's
strategy
for
higherthat
the cellUL
can
support
to
whether
16QAM
is on
mistakenly.
and
increase
the
successful
priority
service;
the
less
of the
Downlink
Enhanced
allowed
to
be
used
in
the
If
this parameter
isthe
toocode
big,
receive
rate
ofand
signalling.
value,
the
less
of
CELL_FACH
is
not
RNC.
time
delay
of for
RB0~RB4
One
of dpcchPcpLen
and
refused
ratio
high priority
suggest
towould
adjust.
message
big.is OK.
srbDelay
go intobe
effect
users in high-load
cell.
In current network, Uplink

CAC threshold is set to a
larger value to shield UL CAC
function, the value of this
switch is indifferent and the
default value is "0: Off".
To avoid the downlink
overload and protect the
system, the downlink CAC
function must be opened.
New CAC
(Service Setup,
handover or
Service
reconfiguration)
New CAC
(Service Setup,
handover or
Service
reconfiguration)
For good performance of

HADPA traffic in the cell, Cell
HSDPA throughput
Immediately
Admission Control should be
opened.
New CAC
It's set to the average
(Service Setup,
Pathloss
for Commercial
This parameter
is used to
handover or
network
solve theordinary
networkscene. It's a Service
seasoned value.
optimization
problem in Lybia reconfiguration)
in which more than ten
thousand RRC
CONNECTION REQUEST
New Signalling
exit per 15 minutes in one
Setup on DCH
cell. In ordinary network, that
scene will not happen and
this parameter is set to 255
To
match the
to reactive
thebackground
function to
noise
withRNC
the real
save the
CPUnoise,
cost. this Immediately
function must be opened.
It's set to the base noise

value of NodeB restore
factory setting
Immediately
It's set to the maximal user

number that may be beared
on DL EFACH in one cell
Immediately
For the value of

CodeTreeResRto is 0 (code
not reserved), this value is
invalid.
The default value of
dpcchPcpLen and srbDelay
can ensure the DPDCH
power is suitable at the
beginning of the DPDCH
data
transmission.
The default
value of srbDelay
can ensure the DPDCH
power is suitable at the
beginning of RB0~RB4
message be transmitted, and
the time delay is acceptable.
16QAM is not supported in
this version, so the switch is
closed by default. It will be
supported in UR11 version.
New Code
Resource CAC
(Service Setup,
handover or
Service
reconfiguration
New connection
New connection
At next judgment
(i.e., shall not
affect ongoing
connections)
No
No
No
No
No
No
No
No
No
No
No
No
parameter is relative to the

cell maximal transmit carrier
power and is used to decide
the initial AMR data rate.
Configuration
Rule: This
Parameter Function:
The
value
of
the
parameter
parameter is relative
to the is
larger,
the base
AMR noise
accessand
with
cell
uplink
is
the
dataInitial
rate AMR
is
useddiscounting
to decide the
more
difficult to occur, and
data
rate.
Function:
Number with
the
QoS
isUser
better;
Configuration
Rule: Activation
Compressed
Mode
The
value
the
is
The
value of
ofStrategy
the parameter
parameter
is
for
Balance
Based
smaller,
the
AMR
access
with
larger,
the AMR access with
On
Measurement
the
discounting
data rate
rate
is
the
discounting
data
Parameter
Function:
Thisis
Related
cell's
esaier
tofactor:
occur,
and
the
more
difficult
to
occur,
and
parameter
indicates
the
Pthroughput
and load
Parameter
Function:
ThisQoS
system
isislarger,
but step
the
the
QoS
better;
CPICH
power
down
size
This
parameter
is
smaller,
the
parameter
indicates
the
time
is
worse.
The
value
of
the
parameter
is
used
to
switch
off
frequency
user Number
withtwo
interval
between
smaller,
the
AMR
access
with
intelligently.
compressedofmode
activation
downgrade
P-CPICH
the
discounting
data
rate
isthe
Configuration
when
is
smaller
and
the
users
power
used
toRule:
switch
off can
esaier
to occur,
thecells
frequency
is determined
to
be balancced
toand
other
frequency
intelligently.
system
isconsequently,
larger,
butbe
thethe
QoS
switch
off,
it should
are less;
Configuration
Rule:
The
time
is
worse.
switched
off
quickly,
and
Parameter
Function:
Thisit
cell'sfunction
load
decrease
Interval
between
twoslowly.
The
of this
needs
to reduce
the the times
parameter
indicates
Otherwise,
this
parameter
is
downgrade
of P-CPICH
parameter:
This
parameter
possibility
of
call
drop.
of
downgrade
of
P-CPICH
bigger, must
thethe
user
Number
with
Power
longer
enough
to
indicates
default
Cpich
The
smaller
this
parameter
power
with
equal
step
used
to
compressed
mode
activation
complete
cell
reconfiguration
Ec/No
of the
cell,
used
for is,
the
more
smoothly
the
switch
off
frequency
is
bigger,
but
which
impacts
and
handover
UE
to
other
calculating power increment
frequency
off, the
intelligently.
cell's
throughput
and
system
cell.
And
it be
needs
to ensure
resulted
by
theswitched
new
less
possibility
of
call
drop,
Configuration
Rule:
when
performance.
the
frequency
be for
switched
off
connected
traffic
scenethe
but
thevalid
longer
the frequency
frequency
isCpich
determined
quickly.
where
Ec/No to
can
be
switched
off. UE
switch
off,
should
bepowerIf this
is too
big, it
not
beparameter
got itfrom
in
The
bigger
this
parameter
switched
off
quickly,
andtoit is,
would need
a long
time
based
access
control
the
lesstosmoothly
the power,
needs
reduce
the
decreasing
P-CPICH
algorithm.i.e.
RAB
frequency
be
switched
possibility
of
call
drop.
and
need
a
long
time
tooff,
Assignment or PS data
rate
and
the
more
possibility
of is,
The
bigger
this
parameter
switch
off the
frequency.
increasing,
etc.
call
drop.
the
longer
P-CPICH
power
If thisinvolved
parameter
is too
small,
The
factor
for setting
decreasing
time,the
thevalue
longer
the cell
reconfiguration
might
this
parameter:
of
time
frequency
beP-CPICH
switched
not complete
downlink
initialand
transmit
power
off.
power
decreasing
have
notof
(DL OLPC)
, success
rate
The
smaller
this
parameter
is,
took
effect
when
next
time
service setup and success Pthe
shorter
P-CPICH
poweror
CPICH
power
decreasing,
rate
of downlink
access.
decreasing
time,
the not
shorter
UEs in thisofcell
Influence
thishave
parameter:
time
frequency
be
switched
Function:
Adjust
the
occupied
alreadyvalue
handover
to other
Larger
for this
off.
if the
parameter
is too
bandwidth
of
CCH
cellsBut
which
make
call
drop
parameter
will
lead
smaller
Function:
intra-frequency
small,
the
frequency
would
Configuration
Rule:
It
is
happen.
initial transmit power and be
measurement
quantity
in
switched
when
the
Ues
configured
according
lower
the off
success
rateto
ofthein
deffered
system
information
the
cell
had
not
handover
bandwidth
of the TrPath
toto
RAB Assignment
or PS data
reading
other
frequency,
it
would
the
cell and whether the
increasing;
Configuration
Rule:
make
call
drop.
operators
are
sensitive
to the
Smaller
value
for thisintrafrequency
interference,
occupied
bandwidth
of
CCH
parameter
will lead Larger
Function:
inter-frequency
measurement
accuracy
initial
transmit
power
and
measurement
indicator
Taking
account
of
CpichinEcNo
access
refused
probability
for
CELL_FACH
being
more precise
than
RAB
Assignment
or
PS
data
Configuration
Rule:
Cpich
RSCP for
intraincreasing
Function:
inter-rat
If
the
parameter
is set to "0",
frequency
handover
Suggestion
forindicator
setting
this
measurement
inis
UE
doesn't
perform
FDD
evaluation
,the
Cpich
EcNo
parameter:
average
PCELL_FACH
inter-frequency
measurement
suggested
in
intra-frequency
CPICH
Ec/No
of
ordinary
Configuration
Rule:
in
CELL_FACH
state, and
in
general.
scene
in network
If
the parameter
isshould
set
to be
"0",
reselection
doesn't
occur.
set.
UE
perform
FDD
For doesn't
multi-carrier
scenario,
inter-rat
measurement
in
some UMTS
carrier is used
CELL_FACH
state, andthis
for hot spot coverage,
reselection
doesn'tbe
occur.
parameter should
set as
For
multi-carrier
scenario,
"1".
some
UMTS carrier is used
It's a network
for
hot
spot coverage and cell
reselection to GSM
parameter,
neighboring
cellsiswill be
The larger value
expected
in
CELL_FACH,
recommened when the cellthis
parameter
should
set as
has more than
onebe
included
"1".
neighboring cell.

At Next Use
The uplink is switched off

with a high threshold
because the fluctuation of
RTWP.
At Next Use
The cell's throughput and

load are considered to define At Next Use
this default value.
parameter can ensure the
frequency be switched off
Immediately
quickly and reduce the
possibility
call drop.
The defaultofvalue
of this
parameter is longer enough
to complete cell
reconfiguration and handover Immediately
UE to other cell. And it can
ensure the frequency be
switched
off value
quickly.
The default
of this
Immediately
frequency be switched off
quickly and reduce the
possibility of call drop.
New CAC
It's set to the average P(Service Setup,
CPICH Ec/No for
handover or
Commercial network ordinary
Service
scene. It's a seasoned value.
reconfiguration)
At next usage
resource.
When system
according to intra-frequency
information is
interference and
changed
measurement accuracy.
information is
deployment.
changed

deployment.
requirement of power saving.
When system
information is
changed
Immediately
No
No
No
No
No
No
No
No
No
No
No
No
It's a network
parameter,
The larger value is
recommened when the cell
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has
than one included
It's amore
network
neighboring
cell.
parameter,
The larger value is
has more than one included
neighboring cell.

off,
it satisfy
Theand
default
valuethe
of this
requirement
of avoid
powerthe
saving.
parameter can
off,
it satisfy
Theand
default
valuethe
of this
requirement
of avoid
powerthe
saving.
parameter can
off,
it satisfy
Theand
default
valuethe
of this
requirement
of avoid
powerthe
saving.
parameter can
off,
it satisfy
Theand
default
valuethe
of this
requirement
of avoid
powerthe
saving.
parameter can
off,
it satisfy
Theand
default
valuethe
of this
requirement
of avoid
powerthe
saving.
parameter can
The
default value
of this
requirement
of power
saving.
parameter can open the
closed neighboring cells in
time when the load of cell
reach a certain level to avoid
congestion.
congestion.
congestion.
congestion.
congestion.
congestion.
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
No
No
No
Yes
No
No
No
No
No
No
Yes
Yes
Function:
This parameter
It's a network
indicates
if
the CE is
evaluated
during
the
parameter,
judgment
of
the
cell
The larger value is load
based
frequency
switch
off
recommened
when
the cell
intelligently.
It's
a
network
has more than one included
Related
Factor:
neighboring
cell.The accuracy
of
the judgment result of
parameter,
frequency
switch
It should be
suredoff/on
that the
intelligently
and
influence
frequency close the
is not
allowed
of
CE
evaluation
to
RNC
to the firt frequency which is
performance.
used to provide the continous
If
the parameter is set to
coverage.
Evaluated, the result of
frequency switch off/on
intelligently judgment is more
accurate.
But the RNC
Function: S-CPICH
performance
would be
Deactivation
Support
Function:
Threshold
of MIMO
impacted
due
to the complex
Indicator
User
Number
to
Deactivate
calculation.
Configuration
Rule:
This
the
Secondary
Antenna
If
the
parameter
isbe
setset
to Not
parameter
should
Configuration
Rule:
Ratio of
Evalataed,
the
RNC
according
to operator network
MIMO
service
performance
is not impacted
deployment.
Adjustment
Suggestion:
It
Function:
Threshold
of MIMO
by
frequency
switch off/on
should
be
set
to
a
smaller
User
Number
to
Activate
intelligently much. But the
value
if the
ratio
of MIMO
Secondary
accuracy
ofAntenna
the judgment
service
is
high,
so
MIMO
Configuration
Rule:that
Ratio
of
result of frequency
switch
services
could
have
better
MIMO
service
off/on intelligently
may be
experience.
And it shouldIt be
Adjustment
impacted. Suggestion:
set
to
a
larger
value
if the
should be set to
a smaller
Parameter
Function:
This
ratio
ofif MIMO
service
is low,
value
the
ratio
of
MIMO
Function:
Trigger
Time
tosafe
parameter
indicates
the
so
that
non-MIMO
services
service
isorhigh,
so that the
MIMO
Activate
Deactivate
Sthreshold
ofbetter
transmission
could
have
experience
services
could
have
better
CPICH
carrier
power
for itNode
B to
Parameter
function:
indicates
experience.
And
be
Configuration
Rule:should
Traffic
use.
the
minimum
number
of
interset
to
a
larger
value
if
the
volume violation
speed
Configuration
Rule:
freq
neighbour
cell inThis
SIB
ratio
of MIMO
service
is low,
Adjustment
Suggestion:
It if
parameter
is
used
to ensure
the
SIB
length
exceed
so
that
non-MIMO
services
should
be
setHSPA
to a larger
Node
B
use
power
maximum
could
have
better
experience
value
if
the
traffic
volume
safely,
when
the
HSPA
total
Parameter
controlling
factor:
changes
fast.
Anddynamic
it should
power
is
in
"RNC
mobility,
reliabity
Parameter
function:
indicates
be
set tocell
amode".
smaller
value
assigning
And
it if the
The
larger
value
this
the
minimum
number
ofslowly.
GSM
traffic
volume
changes
needs
to
consider
the
parameter
is, when
SIB
neighbour
cell
in
SIB
if
the
throughput
of HSDPA
service
length
exceed
maximum
and
SIB
length
exceed
maximum
as
well.
begin
exclude
neighbour
cell,
Parameter
controlling
If
this
parameter
is cells
toofactor:
small,
the
more
inter-freq
mobility,
cell reliabity
the
total HSPA
power
would
contained
in
SIB,
the better
The
larger
value
be
too
small,
andthis
it would
mobility
to
inter-freq
cell,
but
parameter
is, when SIB
affect
the throughput
of
the
larger
probility
for
SIB
length
exceed
maximum and
HSDPA
service.
over-length,
theneighbour
worse cell,
begin
exclude
If
this parameter
is too big,
reliabity
of
cell
the
more
GSM cells
the
total
power
of
Node B
The
small in
value
this
contained
SIB,
the better
would
be
too
big,
and
it would
parameter
is,
when
SIB
Function:
parameter
mobility
toThis
GSM,
but
the
affect
the
system
stability.
Parameter
Description:
This
length
exceed
maximum
and
indicates
whether
1a/1c/1d
larger probility
for SIB
overparameter
indicates
the
begin
exclude
neighbour
for
CS
will
be
handled
via
length, the worse reliabitycell,
of
switch
setting R99
the
cellspower
IUR.
cell lessforinter-freq
ratio
for different
PLMN
when
contained
in
SIB,
the worse
Configuration
Rule:
The small
value
this
carrier
When
thisbut
mobilitysharing.
to inter-freq
cell,
compatibility
different
parameter
is,ofwhen
SIB
switch
is on,probility
and
power
the
smaller
for SIB
vender
length
exceed
maximum
and
congestion
happen,
the
over-length,
the
better
For
CSexclude
only service,
if R99
begin
neighbour
cell,
power
forcells
different
reliabity
of
cell
rncFeatSwitch
bit15
is 0PLMN
and
the lessratio
GSM
contained
need
be worse
satisfied.
CsIntraEvtSwch
ismobility
0, SRNC
in SIB,tothe
to
Configuration
Rule:
It needs
will
not
handle
event
GSM, but the smaller
probility
to
the operator's
1a/1c/1d.
forconsider
SIB over-length,
the better
requirement.
reliabity of cell
If this parameter is set to "1:
On" , when power congestion
happen, the R99 power ratio
for different PLMN is need to
be satisfied.
If this parameter is set to "0:
Off" , the R99 power ratio for

congestion.
parameter can guarantee the
continuous coverage, and it
power
saving. of the
The accuracy
judgment result of frequency
switch off/on intelligently and
the influence of CE
evaluation to RNC
performance are considered
to configure this parameter.
network deployment.
It is better not to reconfigure
too much MIMO services
before S-CPICH deactivation
in the early period that this
function is deployed
It is set to a larger value
comparing to the threshold to
deactivate S-CPICH to avoid
activating
and of
deactivating
If the number
MIMO
the
S-CPICH
over
frequently.
services number keeps
larger
than the activating threhold
or smaller than the
deactivating threshold for 60
seconds, it could be judged
that the MIMO service
number
is increasing
or
The default
value of this
decreasing.
parameter ensures Node B
use HSDPA power safely,
and the throughput of HSDPA
service is big as well.
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Experienced
Next System
Information
Update
Experienced
Next System
Information
Update

according to compatibility of At next use
different vender.

Immediately
sharing parameter)
Yes
No
Yes
No
No
No
No
No
No
No
No
No
R99
maximum
power
(1-cell, it
are HSDPA
users
in the
MinHspaPwrRto)
needs to the best when
effort to
HSDPA
avoid theuser
R99exists.
power exceed
Configuration
the maximum Rule:
powerIt needs
to
avoid ping-pong
between
threshold
(1the
R99
maximum
power
be
MinHspaPwrRto) .
exceed
state
and
R99
power
normal
statethe
when
HSDPA
to consider
operator's
user
exists. And it also needs
requirement.
to
consider
the R99
service
If this
parameter
is set
to "1:
quality.
On" , when HSDPA user
If
this parameter
setbest
too
exists,
it needs toisthe
big,
the
R99
power
would
be
Parameter
Function:
This
effort to avoid the R99 power
hard
to come
back to
R99
parameter
thethe
power
exceed
theindicate
maximum
power
power
normal
from the
offset
between
the
threshold
(1- ofstate
The
function
thisinitial
R99
maximum
power
be
DPCCH
power
level
MinHspaPwrRto)
.
parameter:
This
parameter
The function of this on
exceeded
state
when
HSDPA
secondary
frequency
If this parameter
is of
setthe
to "0:
indicate
theUL
switch
parameter:
This
parameter
user
exists,
so
the
R99
load
when
it
is
activated
and
the
Off" , R99
power
can
exceed
DPCH
code
share
in the
RAN
indicates
the
Reserved
Bit
will
be
reduced
too
much.
It
current
DPCCH
power
level
the
maximum
power
sharing
Rate
for single I&B
affects
the
R99
service
on
primary
UL
frequency.
threshold
(1Influence of E-DCH
this parameter:
Scheduling
Traffic,
quality.
Configuration
MinHspaPwrRto)
. It needs
it's
configured
according
to
which
is used Rule:
in
Uplink
If
this
parameter
is
set
too
to
consider
the
initial
DPCCH
the
netork
planning
result
admission control for I&B
small,
thequality
R99
power
would
channel
and Traffic.
the
Scheduling
E-DCH
be
easy
to
come
back
the
system
capacity
of
the
The involved factor for to
setting
R99
power
normal
state
from
secondary
UL
frequency.
this parameter: Uplink
the
R99
maximum
power be
The
bigger
this parameter
is,
Capacity,
Uplink
overload.
the
exceeded
state
when
HSDPA
the
smaller
initial
DPCCH
reserved bit rate for I&B
user
exists,
and
R99
power
power
of theE-DCH
secondary
UL
scheduling
when
Ewill
easy
exceed
R99
frequency
when
it
is
DCH scheduling in NodeB.
maximum
power
again.
activated.
Influence of
this parameter:
The
smaller
this
parameter
The larger of the value, the is,
the
bigger
initial
DPCCH
less
capacity
forindicates
I&B
The
parameter
the
power
of
the
secondary
scheduling
E-DCH
trafficUL
in
Button
of
Upating
SIB
frequency
when
itof
is the value
the
cell; The
less
completely.If
the
value
of
the
activated.
Function:
between
(less
than Interval
the
reserved
bit
parameter
is modified,
RNC
reception
ofall
periodical
reports
rate
for I&B
scheduling
Ewill update
SIB completely.
and
ofindicates
thescheduling
interDCHtriggering
when E-DCH
The
parameter
frequency
or
inter-rat
in NodeB)
, the
larger
Switch
of SIB
Scheduling
handover.
capacity for I&Bthe
scheduling
Optimization.If
value of EConfiguration
Rule:
variation
DCH
traffic in the
capacity
the parameter
is 1cell
(Open)
,
Parameter
Function:
maximal
of
signal
quality,
average
and
the
more
overload
RNC will use MIB to schedule
allowed
Non-VIP
CSmoving
user
handover
times,
probability
of itthe
cell;
all
SIB when
is UE
possible..
number
when
current
cell is
speed
the
neighboring
of
VIP
cells
If this parameter is set to
a
and
VIPvalue,
user dose
not exist in
greater
the probability
current
cell decision becomes
of incorrect
Configuration
Rule:
VIP
users
low; however,
the handover
Parameter
Function:
maximal
performance,
non-VIP
user
Parameter
Function:
Thisin
algorithmNon-VIP
becomes
allowed
PSslow
user
performance
parameter
indicates
the
responding
to signal
change.
number
when
VIP user
dose
The
largerofoflow
thethe
parameter,
threshold
HSDPA
user
Suggestion:
for
scenario
not exist
the
more
Non-VIP
users
can
number
level.
When
the
that
handover
is
expected
to
Configuration Rule: VIP users
be
onlineuser
in the
cell
VIP
HSDPA
number
isuser
triggered
quickly,
thiswhen
performance,
non-VIP
does
notthan
exist
and
theThis
less it
smaller
this
threshold,
parameter
should
be
set
performance
Parameter
Function:
probability
that
VIP
preempt
is
in larger
low
HSDPA
user
number
small;
and
vice
The
of
theversa.
parameter,
parameter
indicates
the
Non-VIP
smaller
of
level.
the more users;
Non-VIP
users
can
threshold
of highthe
HSDPA
user
the
parameter,
the
less
NonConfiguration
Rule:
It
needs
be onlinelevel.
in the
cell when
number
When
the VIP
VIP
users
can
be
online
in the
to
consider
the
HSDPA
does
notuser
exist
and
theisless
HSDPA
number
not
cell
when
VIP
does
not
exist
service
quality
and
uplink
probability
that
VIP
preempt
smaller than this threshold, it
and
probability
thatof
capacity.
Non-VIP
users;
the
smaller
is in the
highmore
HSDPA
user
VIP
preempt
Non-VIP
users;
Bigger
this
parameter
is,
the parameter,
number
level. the less Noneasier
the can
CQIRule:
feedback
cycle
VIP users
be
online
in
the
Configuration
It needs
and
CQI
repetition
factor
for
cellconsider
when VIP
not exist
to
thedoes
HSDPA
low
is used.
and load
the quality
more
probability
service
and uplinkthat
Smaller
this
parameter
is,
VIP
preempt
Non-VIP users;
capacity.
harder
the CQI
The
smaller
thisfeedback
parameter is,
cycle
and CQI
repetition
the easier
the CQI
feedback
factor
for
low
load
is used.
cycle and CQI repetition
Usually
CQI
feedback
factor forthe
high
load
is used.
cycle
and
CQI
repetition
factor
for low
the harder
theload
CQIisfeedback
configured
to improve
the
cycle
and CQI
repetition
HSDPA
quality,
but it
factor forservice
high load
is used.
might
affect
the
uplink
Usually the CQI feedback
capacity.
cycle and CQI repetition

Immediately
sharing parameter)
It can avoid ping-pong
between the R99 maximum
power be exceed state and
R99 power normal state
Immediately
when HSDPA user exists.
And it also considers the R99
service quality.
Take effect for the

next call
The default value consider

the initial DPCCH channel
quality of the secondary UL
frequency as priority.
Immediately
It's set to the reserved bit rate

for I&B scheduling E-DCH
Next UL CAC in
when E-DCH scheduling in
CELL_DCH state
NodeB)
default value equal 0 (reset)
Immediately
default value equal 1 (On)
Immediately

When best cell is
ue mobility are considered to changed
Immediately
user performance.
Immediately
user performance.
Consider the HSDPA service

Immediately
quality and uplink capacity.
Consider the HSDPA service

Immediately
quality and uplink capacity.
No
No
Yes
Yes
Yes
No
No
Yes
Yes
No
No
No

indicates the Cpich Ec/N0
threshold to decrease the
initial AMR data rate. If
reported Cpich EcNo is less
Function:
This parameter
than the threshold,
it will be
Function:
LevelRSCP
PCH
indicates
the
Cpich
decided toCell
decrease
the intial
Switch.
threshold
judge
whetherthe
AMR datato
rate
to improve
Configuration
Rule: area. If
UE
in bad coverage
userisexperience.
Turn
on
the
function,
UE
reported
Cpich
EcNo the
is
less
factor:
can
be
transferred
to
PCH
than
the
threshold,
it
would
user experience and network
state
when there
is no data
be
decided
to decrease
the
coverage
transmission,
and
RRC
intial
AMR
data
rate
to
If this parameter is too big ,
connection
setup
process
is
improve
therate
user
experience.
AMR date
may
be
no
need
when
there
is
data
Parameter
factor:
decreased controlling
unnecessarily.
transmission.
Forand
thenetwork
frequent
user experience
services
coverageto be setup and
released
scene, to
on ,the
If this parameter
is turn
too big
function,
will save
radiodata
AMR dateit rate
and RRC
resource
of Uu
interface, but
rate may be
decreased
there
is
Cell
Update
in PCH
unnecessarily.
This
state.parameter indicates
The
of is
this
whether
SIB18
broadcast
Turnfunction
off the
function,
the UEin
parameter:
Switch
of
the
cell.if
the
number
ofPCH
can't be transferred tothe
Uplink
Channel
neighbour
cell
orAllocation
PLMN
is
state when
there
is no data
Strategy
For
Bad
larger,
this
parameter
should
transmission,
andCoverage.
it will
be
If
the
is set
"1: On",
be
setvalue
0
transferred
to
Idletostate,
and
when
PS
services
is
setup on
RRC connection setup
cell_DCH
, when
and ifthere
it is is
process
isstate
need
The coverage,
function
ofits
this
bad
uplink will
data
transmission.
parameter:
be
setup onP-CPICH
DCH but Ec/No
not Ethreshold
for bad E-DCH
DCH.
coverage.
It is mainly to use for large
If
the value
is larger,
it is and
distance
coverage
scene,
easier
to
consider
that
the UE
the
value
"0"
is
recommended
The
function
of
The
function
of this
this
is
in
the
bad
E-DCH
for
general
scene.
parameter: Switch
P-CPICH
RSCP
parameter:
of the
HScoverage.
threshold
for bad
E-DCH
DSCH/E-DCH
to
HSIf
the value is smaller, it is
coverage.
DSCH/DCH
more
difficultisChannel
to
consider
that
If
the value
larger,
it isUE
Switching
Triggered
by
the
UE
is
in
the
bad
E-DCH
easier
to consider
Transmitted
Powerthat
andthe UE
coverage.
is
in
the
bad
E-DCH
Throughput.
coverage.
Parameter
This
If
the value Function:
is set to "1:
On",
If
the value
is smaller,
it is
parameter
indicates
the
when
the system
receives
more
difficult
to for
consider
that
function
switch
load based
consecutive
EToD4BtimesThr
Parameter
Function:
This
the
UE
is
in
the
bad
E-DCH
BLER.
throughput measurement
parameter
indicates
the
coverage.
Configuration
Rule:
When
the
reports
(Event
4B) on
the EParameter
Function:
This
default
load
level.
When
the
switch
is
on,
services
have
DCH
from the
user plane,
and
parameter
indicates
the
low
function
switch
for load
different
target
BLER
in based
Event
6A
is
reported
by
UE,
RoT
level
threshold.
Where,
BLER
iswill
off,
get
the
power
Parameter
Function:
This
different
cell
load
level.
Ifform
the
the
UE
be
switched
RoT
=
RTWP
Background
control
parameters
based
on
parameter
indicates
the
high
cell
load is high, the
quality
of
HS-DSCH/E-DCH
to
HSNoise,
it indicates
the
uplink
this
default
load
level.
RoT
level
threshold.
Where,
the
service
will
be
decreased,
DSCH/DCH..
load.
the
cellsystem
is in the
Configuration
Rule:
RoT
=When
RTWP
- Background
and
in
this
way
the
It
is RoT
mainly
to use
for
large
low
state,
the
RoT
is
0:
it
means
get
the
power
Noise,
it indicates
the
uplink
capacity
will
be increased.
distance
coverage
scene,
and
lower
than
this
threshold.
control
parameter
like
in
low
load.
the
cellisislow,the
And
ifWhen
the "0"
cell
load
it
the
value
is
recommended
Configuration
Rule:
It needs
load
state,state,
the
service
quality
high
RoT
the
RoT
is
can
supply
good
service
for
general
scene.
to
consider
quality
is
very
good,the
butservice
the system
higher
than
this
threshold
or
quality.
and
system
capacity.
capacity
is small.
equal
to this
threshold. When
Adjustment
Suggestion:
For
If
parameter
is
configured
1:the
it RoT
means
get
the
power
the
is
lower
than
the
high
load
system,
this high
too
small,
it
is
hard
tobut
recover
control
parameter
like
in not
RoT
levelcan
threshold,
function
be switched
on.
to
the
low
RoT
state,
when
medium
load
state,
the
lower than the low RoT level
the
uplink
load
(RoT)
service
quality
and
threshold,
the cell
isthe
inis low
and
the
user
number
is large,
system capacity
is neither
too
medium
RoT state.
the
uplink
power
control
good nor too bad.
Configuration
Rule: It needs
parameters
withthe
lowpower
QoS
still
2: consider
it means the
get
to
service
quality
is
configured,
so
the
service
control
parameter
like
in
high
and system capacity.
quality
will be
load
theaffect.
service
quality
If
thestate,
parameter
is configured
If
parameter
is configured
is the
not
good,
but
the
system
too
small,
it is
easy
to
enter
too
big,
islarge.
easywhen
to recover
capacity
high
RoTitisstate,
the to
the
low
RoT
state,
when
the
uplink load (RoT) is low and
uplink
load
(RoT)
is
high
the user number is large,and
the
the
user
number
is large, the
uplink
power
control
uplink powerwith
control
parameters
low QoS still
parameters
with
QoS still
is configured,
so high
the service
is
configured,
so
the
system
quality will be affect.
capacity
will be affect.
If the parameter
is configured

Immediately

Immediately
is because the RRC
connection setup process is
At next use
very fast, it doesn't influence
the user experience, and
there is no Cell Update in Idle
state.
The reason of the
Immediately
distance coverage scene,
and the value "0" is
recommended for general
scene.
At next use

At next use

At next use
distance coverage scene,
and the value "0" is
recommended for general
scene.
At next use

capacity.
Immediately

capacity.
Immediately

capacity.
Immediately

capacity.
Immediately
No
No
No
No
Yes
Yes
No
No
No
No
No
No
Configuration
It needs
uplink low userRule:
number
level
to
consider
the
service
quality
threshold. When the cell
is in
and
system
the low
usercapacity.
number level, the
If
the parameter
configured
uplink
equivalentisuser
number
too
small,
it isthis
hard
to recover
is lower
than
threshold.
to
the low user
number
level,
Parameter
Function:
Configuration
Rule:
ItThis
needs
when
the
uplink
equivalent
parameter
indicates
the
the service
quality
Parameter
This
user
number
is
small
and the
downlink
low
load
level
and system
capacity.
parameter
indicates
the
RoT
high,
the
uplink
power
threshold,
used
in
load
If theisparameter
is the
configured
downlink
high
load
level
control
parameters
with
low
based
power
control
too
small,
it
is
easy
to
enter
threshold, used in the load
QoS
still
is
configured,
so
the
parameter
function.
When
the
the
high
user
number
level,
based power control
service
quality
will
be
affect.
cell
is the
in downlink
low
load the
when
uplink
equivalent
parameter
function.
When
If
theisnumber
parameter
ishigh
configured
state,
the
downlink
effective
user
is small
and
the
cell
in downlink
load
too
big,
it
is
easy
to
recover
load
is
lower
than
this
RoT isthe
high,
the uplink
powerto
state,
downlink
effective
the
low
user
number
level,
threshold,
and
the configured
control
parameters
with
low
load
is higher
than
this
when
the
uplink
equivalent
power
control
parameter
QoS
still
is
configured,
socan
the
threshold or equal to this
user
number
is
large
and
the
supply
high
QoS.
service
quality
will
be
affect.
threshold, and the configured
RoT
high, the
uplink
power
Configuration
Rule:
It needs
If theisparameter
is configured
power
control
parameter
can
control
parameters
with
high
to
consider
the
service
quality
too big,low
it isQoS.
hard When
to enter
the
supply
the
QoS
still is
configured,
the
and
capacity.
high system
user
number
level,
downlink
effective
load so
iswhen
system
capacity
will
be
affect.
If
the
parameter
is
configured
the uplink
user
lower
thanequivalent
the downlink
high
This
parameter
is
invalid
too
itlarge
is hard
tothe
enter
number
is threshold,
and
RoT
loadsmall,
level
and
not
when
BlerLoadSwitch
=
0.
Function:
When
CS
service
the
downlink
low
load
state,
is
high,
the
uplink
power
lower than the downlink low is
released
for
Multi-RAB,
so
the
service
quality
willthe
be is
control
parameters
with
high
load
level
threshold,
the
cell
parameter
indicates
whether
affect.
QoS
still is configured,
so the
in
downlink
medium load
Eutran
compressed
mode
If
the parameter
system
capacity is
willconfigured
be affect.
state.
and
measurement
are
too
big,
it
is
easy
to
enter
the
This
parameter
is
invalid
Configuration
Rule:
It
needs
This
parameter
indicates
initiized
for
PS
service
to
downlink
low
load
state,
so
when
BlerLoadSwitch
=
0.
to
consider
the the
service
quality
whether
taking
TCP
provide
servie
fast return
to
the system
capacity
will be
and
system
capacity.
optimization
into
effect
for
Eutran
as
soon
as
possible
or
affect.
If
the parameter
is new
configured
users
setting
up
a
redirection
to
Eutran
without
This
parameter
is
invalid
too
small, it in
is the
easy
to enter
connection
cell.
measurement.
when
BlerLoadSwitch
0.
the downlink
high load=state,
Configuration
Rule:
This
so the service quality will be
parameter
should be set
affect.
according
to operator
network
If the parameter
is configured
deployment
and
UE
too big, it is hard to enter the
capability.
downlink high load state, so
When
PS service
with
the system
capacity
willEutran
be
supporting
is
expected
to
This
parameter indicates
affect.
handover
Eutran
in in
Object
ID to
and
isisunique
This parameter
invalid
UTRAN-Eutran
co-current
father
Object .
when BlerLoadSwitch
= 0.
scene asofsoon
possible, if
function
this as
parameter:
most of UEs
don't support
indicate
the PLMN
is common
Eutran
or
not measurement, the
parameter
is 2, otherwise, the
Factors
of consideration:
parameter
is 1.
configure accordong
network
planning result. If the PLMN is
common, this parameter is
set 1, otherwise 0
Function: The parameter is
object.
CS domain specific access
class N barred indicator
(N=0..9)
Configuration Rule:
If the system is highly loaded,
function
of this
parameter:
the operator
could
set theis
Function:
The
parameter
indicate
the
access
parameter
tospecific
restrictweight
some of
or
PS
domain
access
PLMN
all
Acs
initating
the
CS
call
class
N barred
indicator to
Factors
of consideration:
reduce
the
system
load.
(N=0..9)
Allowed accessed UE
Configuration
Rule:
number.
It should
according
to
The
valuebe
is set
larger,
the
the
access
needthis
to
probility
thatClass
a UEthat
access
be
barred
by
the
operator
PLMN is bigger, the number
of accssed UE in this PLMN
is larger, and the load of CN
resonding to this PLMN is
higher.
The value is smaller, the
probility that a UE access this
PLMN is smaller, the number
of accssed UE in this PLMN
is smaller, and the load of CN

capacity.
Immediately

capacity.
Immediately

capacity.
Immediately

capacity.
Immediately
default value equal 0 (OFF)
New connection

At next use
network deployment and UE
capability.
Basic parameter
can not be
modified
N/A
At Commit
N/A
At next use
Take effect after

the change is
the requirement to bar the AC
loaded to the
manually.
RNC
Take effect after
the change is
the requirement to bar the AC
loaded to the
manually.
RNC
N/A
New users
Yes
Yes
Yes
No
No
No
Yes
No
No
this
is set to
, theparameter
DSAR is closed
in "Close
CS
PS
Domain
DSAR
by If
OMCR"
domain
of the
PLMN.
it is
,"Open
the DSAR
is closed
in PSby
CS Domain
DSAR
domain
theDSAR
PLMN.isIfopened
it is
OMCR" of
, the
"Open
PS Domain
byIf
in CS domain
of theDSAR
PLMN.
OMCR"
,
the
DSAR
is
opened
it is "Open and Close CS
in
PS domain
the PLMN. If
Domain
DSARofDynamically
itbyisRNC"
"Open, the
andDSAR
Close isPS
Domain
DSAR
Dynamically
dynamically
opened
or closed
Function:
This
parameter
by
RNC"
,whether
the of
DSAR
is and
in CS
domain
the
PLMN
indicates
Paging
dynamically
opened
or
according to CS domainclosed
Load
in
of the of
PLMN
of PS
Iu ordomain
accessibility
Iu.
Restriction
is restricted
or
according
to PS
domain
Load
Configuration
Rule:
permitted
when
the
DSAR
of
Iu
or
accessibility
of
Iu.
The
parameter
should
be
(Domain Specific
Access set
Function:
ThisRule:
parameter
Configuration
to
0
if
it
is
not
necessary
to
Restriction)
of
the
PLMN
is
indicates
whether
the
DSAR
This
parameter
indicates
the
bar
the
CS
domain.
And
it
running.
If
the
switch
is
(Domain
Specific
Access
number
of
Barred
AC
in
one
should
bethis
set
to
if the
opened,
Restriction)
ofcell
CS1restricts
domain
polling
period
when
PSDSARto
operator
need
to
start
some
UEs
from
responding
operates
in theof
method
of
domain
DSAR
each
manually.
If
it
is
set
to
2,PLMN
theis
paging
message
and initiating
"Polling"
.
If
this
parameter
Function:
This
parameter
operates
in
the
method
of
DSAR
will
be
started
and
the to
in
set
"Polling"
, the
cell
indicates
the
DSAR
"Polling"
.whether
stopped
according
the
CS
the
CS/PS
domain
when
periodically
performs
AC
(Domain
Specific
Access
Configuration
domain
load
ofRule:
the
Iu. of the
CS/PS
domain
DSAR
(Access
Class)
restriction
in
Restriction)
of
PS
domain
The
parameter
should
be set
PLMN
is
running.
CS
domain
of
this
PLMN.
If
operates
thenecessary
method ofto
to
0 if it isinnot
Configuration
Rule:
the
parameter
isparameter
setAnd
to "Not
"Polling"
.
If
this
bar
the
PS
domain.
it is
If
the system
is very
loaded,
Polling"
,
the
cell
performs
AC
set
to
"Polling"
,
the
cell
should
be
set
to
1
if
the
the operator
could settothe
restriction
according
the
AC
periodically
performs
AC
operator need
thethe
parameter
to OMCR.
1to
tostart
reduce
barred
in
the
(Access
Class) restriction
DSAR
manually.
If it is set in
to
load.
Configuration
Rule:
Function:
This
parameter
PS
domain
ofwill
this
2, the
DSAR
bePLMN.
startedIf
If
the
value
set
to "Not
indicates
theisaccording
number
the
parameter
is set
toof"Not
and
stopped
the
Polling",
specifed
Acs
Barred
AC
in
one
polling
Polling"
, theload
cellof
performs
PS domain
thecould
Iu. AC
be bared
toaccording
CS
period
when
CSdomain.
domain
restriction
to the AC
Otherwise,
allOMCR.
ACs
are bared
DSAR
PLMN
barred of
in each
the
periodically.
operates
in
theRule:
method of
Configuration
Function:
This
parameter
"Polling"
.theisnumber
If the value
set to "Not
indicates
of
Configuration
Rule:
Polling",AC
specifed
Acs
could
Barred
in one
polling
The
larger
value
is, the
be bared
tothe
PS
domain.
period
when
PS
domain
more
ACs
are
restricted
to
Otherwise,
all Acs
are bared
DSAR
of each
PLMN
Parameter
Description:
This
access
the
CS
domain
when
periodically.
operates inindicates
the method
parameter
the of
R99
the
DSAR. function was
"Polling"
power
ratio
for
different
PLMN
performed
in polling
Configuration
Rule: mode.
when carrier sharing.
The
The
larger the
value
is,power
the
summation
of the
R99
more
ACs
are
restricted
to
ratios for all PLMN is 100%.
access
the
PS
domain
when
the
DSAR function
was
to consider
the operator's
performed
in
polling
mode.
requirement.
Bigger
this parameter
The function
of this is,
more
R99
power
this PLMN
can
use.
indicate the DPCH code ratio
Smaller
parameter
is,
of PLMNthis
in the
RAN sharing
less
R99
power
this
PLMN
can
use.
it's configured
according to
the netork planning result
It could be set to 1 or 2 if the

DSAR function is paid. 1
should be selected if starting
DSAR manually is required. 2
DSAR
toor
the
It couldaccording
be set to 1
2 Iu
if the
load
level
is
required.
DSAR function is paid. 1
DSAR manually is required. 2
DSAR according to the Iu
load level is required.
The paging response should
be restricted as the initiating
a call is restricted.
Take effect after

the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Take effect after
the system
information is
updated
N/A
Take effect after

the change is
loaded to the
RNC
N/A
Take effect after

the change is
loaded to the
RNC
Take effect after

the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Immediately
sharing parameter)
N/A
Take effect for the

next call
No

N/A
can not be
modified
No

reference
toUExternalUtranCellFDD
object.
N/A
At next use
No

object.
N/A
At next use
No
No
No
No
No
No
No
No
No
No
No
No
Function: relation between

UTRAN cell and GSM
neighboring cells.
model between UTRAN and
GSM interactive
If load balance from UTRAN
Function:
UMTS
to GSM isneighboring
expected, this
cells
priorityshould be set
parameter
Configuration
Rule: network
"Overlap".neighboring
Function:
UMTS
planning
including
If inter-rat
is
cells
state handoverUMTS
cells'location,
cell's
expected,
thisUMTS
parameter
Configuration
Rule:
network
Function:
broadcast
in SIB11
signalling
quality
etc..
could
be
set
"neighbor".
planning
or
SIB11bits.Because
If only
the
parameter
value the
is
If
cell
reselection
to
system
information
block
smaller,
theisneighboring
UMTS
cell
expected,
thisis
length
is
limited,
SBI11bits
UMTS
cells'
prority
isset
higher.
parameter
could
be
"cell
introduced, if the number
of
selection/reselection
only"
.
neighboring cells exceed the
If
cell
reselection
and
limit of SIB11, then SIB11bits
handover
to UMTS Cell are
will
be used.
expected,
this Rule:
parameter
Configuration
could
be
set
"cell
neighboring cells number,
and
neighboring cells priority
handover"
.
If this Parameter is "0", the
neighboring cells will be
Function:
HCS
broadcasted
in function
SIB11. switch
Configuration
Rule:
If this Parameter
is "1", the
Function:
cellcells
reselection
If
the parameter
value
is
neighboring
will be
penalty
time will
"True",
HCS
be used and
broadcasted
in
SIB11bits.
Function:
temporary
offsetinin
Configuration
cell
H
criterion
will Rule:
be fulfilled
When
neighboring
cells
cell
reselection
reselection
difficult
level
process
of cell
reselection.In
exceed
the
limition,
the
Configuration
Rule:
cell
The
greater
this
parameter
is,
general,
HCS
is
not
used.
parameter
will
be
set
"0" for
reselection
difficult
level,
cell
the
more
difficult
cell
high
priority neighboring cells.
reselection
reselection tendency
will be triggered,
The
greater
this parameter
is,
and vice
versa.
Function:
temporary
offset in
the
more
difficult
cell
Adjustment
Suggestion: In
cell
reselection
reselection
be cell will
general,
thiswill
parameter
Configuration
Rule:
triggered.Different
value
not
be
adjusted,
because
reselection difficult
level, can
cell
be
configured
different
Qoffset
cantendency
beby
used
to
reselection
neighboring
cells,parameter
which
willis,
control
theHandover
tendency
of cell
The
greater
this
Function:
difficult
reflect
the
different
reselection
more cell
precisely.
the
more
difficult
level
is controlled
by adjusting
reselection
tendency
of
reselection
will
be
the
parameter.
neighboring
cells.
triggered.Different
can
Configuration
Rule:value
handover
Adjustment
Suggestion:
be configured
by differentIn
difficult
level,
handover
general,
this cells,
parameter
neighboring
whichwill
will
timeliness.
not
be
adjusted,
because
reflect
the
different
If
the parameter
valuetois
Qoffset
can
be used
reselection
tendency
ofbe
Function:
quality
offset
of
smaller,
handover
willof
control
the tendency
cell
cells.
neighboring
cells
triggered
easily.If
the
reselection
more
precisely.
Adjustment
Suggestion:
Configuration
Rule:
cell In
parameter value
is larger,
general,
parameter
reselection
difficult
level,will
cell
handoverthis
will
be triggered
not
be adjusted,
because
reselection
hardily.
For tendency
different
Qoffset
can be
used
tois
If
the parameter
value
neighboring
cells,
Different
Function:
quality
offset
control
the
tendency
of of
cell
smaller,
cell
reselection
will
value will be set to reflect
neighboring
cells
reselection
more
precisely.
be
triggered
easily;
and
if the
handover
tendency.
Function:
quality
threshold
Configuration
Rule:
cell For
parameter
value
is
bigger,
cell
Adjustment
Suggestion:
level
in HCSdifficult
reselection
level, cell
reselection
will
besignalling
triggered
the
scenario
that
Configuration
Rule:
cellcan be
reselection
tendency
hardily.Different
value
quality
varies
quickly,
this
reselection
difficult
level
If
the parameter
value
is
configured
by different
parameter
should
be
set
When
HCS
is
used,
if the
smaller,
cell
reselection
will
neighboring
cells,
which
will
small
to protect
handover
parameter
value
is smaller,
H
be
triggered
easily;
and
if
the
reflect
the
different
timeliness.
criterion
will
be
fulfilled
easily
parameter
value
is
bigger,
cell
reselection tendency of
and
cell reselection
will be
reselection
will
be triggered
neighboring
cells.
triggered
easily; value
and if can
the be
hardily.Different
parameter
value
is
bigger,
H
configured by different
criterion
will
be
fulfilled
hardily
neighboring cells, which will
and
cellthe
reselection
reflect
different will be
triggered
hardily.Different
reselection
tendency of
value
can becells.
configured by
neighboring
different neighboring cells,
which will reflect the different
neighboring cells.
Adjustment Suggestion: In
general, this parameter will

When best cell is
changed
network deployment.
Network planning including
UMTS cells'location, UMTS
cell's signalling quality is
default value.
When best cell is

changed

When best cell is
changed
network deployment.
Neighboring cells number
and neighboring cells priority When best cell is
are taken into account in
changed
default value.

network.
When system
information is
changed
cell reselection difficult level

default value.
When system
information is
changed
Cell reselection difficult level

is taken into account in
default value.
When system
information is
changed

default value.
When system
information is
changed

When best cell is
default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed
No
No
No
No
No
No
No
No
No
No
No
No
When HCS is used, if the

parameter
value is
smaller, H
Function: quality
threshold
criterion
will
be
fulfilled
easily
level in HCS
and
cell
reselection
will
Configuration Rule: cell be
triggered
easily;
andlevel
if the
reselection
difficult
parameter
value
is
bigger,
When HCS is used, if the H
criterion
willvalue
be fulfilled
hardily
parameter
smaller,
H
Function:
quality is
threshold
and
cell
reselection
will
be
criterion
will
be
fulfilled
easily
level
in HCS
triggered
hardily.Different
and cell reselection
will be
Configuration
Rule: cell
value caneasily;
be configured
by
triggered
andlevel
if the
reselection
difficult
different
neighboring
cells, H
parameter
value
is
bigger,
When
HCS
is used,
the
which
will
reflect
the ifdifferent
criterion
will
be fulfilled
hardily
parameter
value
is
smaller,
reselection
tendencywill
of be H
and
cell
reselection
criterion
will be
fulfilled easily
neighboring
cells.
triggered
hardily.Different
Function:
quality
offset
and
cell
reselection
will of
be
Adjustment
In
value caneasily;
beSuggestion:
configured
by
neighboring
cells
triggered
and
if
the
general,
this
parameter
will
different
neighboring
cells,
Configuration
Rule:
cell H
parameter
value
is
bigger,
not
be will
adjusted,
because
which
reflect
thelevel,
different
reselection
difficult
cell
criterion
will
be used
fulfilled
hardily
Qoffset
can
be
to
of be
reselection
tendency
and
cell
reselection
will
control
the tendency
ofiscell
neighboring
cells.value
If
the parameter
triggered
hardily.Different
Function:
quality
offset
of
reselection
more
precisely.
Adjustment
In
smaller,
cell
reselection
value can
beSuggestion:
configuredwill
by
neighboring
cells
general,
this
parameter
will
be
triggered
easily;
and
if
different
neighboring
cells,
Configuration Rule: cell the
not
be will
adjusted,
because
parameter
value
is level,
bigger,
cell
which
reflect
the
different
reselection
difficult
cell
Qoffset
can
be
used
to
will be triggered
of
reselection
control
the tendency
hardily.Different
value
neighboring
cells.
If
the parameter
valueofcan
iscellbe
reselection
more
precisely.
configured
by
different
Adjustment
In
smaller,
cell Suggestion:
reselection will
neighboring
which
general,
this cells,
parameter
be
triggered
easily;
and will
ifwill
the
reflect
different
not
be the
adjusted,
parameter
value because
is bigger, cell
reselection
tendency
of
Function:
cell
Qoffset
can
bereselection
used
to
reselection
will
be
triggered
neighboring
cells.
penalty
timetendency
control the
cellbe
hardily.Different
valueofcan
Function:
offset
in
Adjustment
Suggestion:
SIB
Configuration
Rule:
cell
reselectiontemporary
more
precisely.
configured
by
different
cell
reselection
12
is
not
used,
so
this
reselection
difficult
level
Configuration
Rule:
parameter
will
not
becell
The
greater
this
parameter
is,
reflect
the different
reselection
difficult
level,
cell
adjusted.
the
more
difficult
cell
reselection
reselection
will
be triggered,
neighboringtendency
cells.
The
greater
this parameter
is,
and
vice
versa.
Function:
temporary
offset
in
Adjustment
Suggestion:
SIB
the
more
difficult
cell
Adjustment
Suggestion:
cell
12 isreselection
not used,
so this In
reselection
will
be becell will
general,
this
parameter
Configuration
Rule:
parameter
will
not
triggered.Different
value
not
be adjusted,
because
reselection
difficult
level, can
cell
adjusted.
be
configured
different
Qoffset
cantendency
beby
used
to
reselection
neighboring
cells,parameter
which
willis,
control
the tendency
of cell
The
greater
this
reflect
the
different
reselection
more cell
precisely.
the
more difficult
reselection
of
will be
neighboring
cells.
triggered.Different value can
Adjustment
Suggestion:
be configured
by differentIn
general,
this cells,
parameter
neighboring
whichwill
will
not
be
adjusted,
because
reflect the different
Qoffset
cantendency
beThis
usedparameter
to
Main
function:
reselection
of
control
the
tendency
of cell
indicates
thecells.
time of the
RNC
neighboring
reselection
more
precisely.
waiting
for
CELL
UPDATE
Adjustment
Suggestion:
In
message
after
sending
general,
this
parameter
will
GSM Neighbouring
CellRadio
Link
Deactivation
command
not
be
adjusted,
because
Object ID
to
NODEB/DRNC.
Qoffset
can be used to
Influence
cost of
time
control thefactor:
tendency
cellof
obtaining
layer Outreselectionphysical
more precisely.
This
parameter
indicates
of-Sync,
the feeling
of user,
reference
to
wait time to Re-establishment
UExternalGsmCell
object.
the service.
the probability of receiving the
CELL
UPDATE
may
be
Function:
relation
between
decreased,
and
the
UTRAN cell and GSM
probability
call drop may be
neighboringofcells.
increased.
The
bigger
the parameter
is,
model
between
UTRAN and
the probability
of receiving the
GSM
interactive
CELL
may UTRAN
be
If loadUPDATE
balance from
increased;
However,
when
to GSM is expected, this
the
radio
environment
is bad,
the
RNC
may
waist
too
long
"Overlap".
time
to
unnecessary
wait
and
If inter-rat handover is
increase the
time to Reexpected,
thiswait
parameter
establishment
the service,
could be set "neighbor".
and influence the feeling of
user.

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed
N/A
can not be
modified
N/A
At next use

Immediately
layer Out-of-Sync, the feeling
of user, wait time to Reestablishment the service.
At next use
network deployment.
No
No
No
No
No
No
No
No
No
No
No
No

cells priority
Configuration
Rule: network
Function: neighboring
GSM
planning
including
GSM
cells state
cells'location,
GSM
Configuration
Rule: cell's
network
Function:
broadcast
signalling
quality
etc..in SIB11
planning
or
SIB11bits.Because
If only
the parameter
value the
is GSM
If
cell
reselection
to
system
information
block
smaller,
the neighboring
GSM
cell
is
expected,
this
length
is limited,
SBI11bits is
cells'
prority
is
higher.
parameter
set "cell
introduced,could
if the be
number
of
only"the
.
neighboring cells exceed
If
cell
reselection
and
limit of SIB11, then SIB11bits
handover
to GSM Cell are
will
be used.
expected,
this Rule:
parameter
Configuration
could
be
set
"cell
neighboring cells number,
and
neighboring cells priority
handover"
.
If this Parameter is "0", the
neighboring cells will be
Function:
switch
broadcasted
in function
SIB11.
Function: HCS
quality
offset of
Configuration
Rule:
If
this
Parameter
is
"1",
the
neighboring cells
If
the parameter
value
is
Function:
quality
threshold
neighboring
cells
willcell
be
Configuration
Rule:
"True",
will
be level,
used cell
and
level
in HCSdifficult
broadcasted
in SIB11bits.
reselection
H
criterion
will
be
fulfilled
Configuration
Rule:
cell
When neighboring
cells in
reselection
tendency
process
of
cell
reselection.In
reselection
difficult
level
exceed
the limition,
theis
If
the parameter
value
general,
HCS
is
not
used.
When
HCS
is
used,
if"0"
the
parameter
will
be
set
for
smaller, cell reselection
will
parameter
value
is
smaller,
H
high
priority
neighboring
cells.
be triggered easily; and if the
criterion
willvalue
be fulfilled
easily
parameter
is bigger,
cell
and
cell reselection
will be
reselection
will be triggered
Function:
cell reselection
triggered
easily;
and if can
the be
hardily.Different
value
penalty
time
parameter
value
is
bigger,
H
configured by different
Configuration
Rule:
cell
criterion
will
be
fulfilled
hardily
reselection
difficult level
and
cellthe
reselection
will be
reflect
different
The
greater
this parameter
is,
triggered
hardily.Different
Function:
temporary
offset
in
reselection
tendency
of
the
more
difficult
cell
value
can becells.
configured by
cell
reselection
neighboring
reselection
willRule:
be cell
different
neighboring
cells,
Configuration
triggered.Different
value
which
will
reflect
the
different
reselection difficult level, can
cell
be configured
by different
of
reselection
tendency
neighboring
cells,
which will
neighboring
cells.parameter
The
greater
this
Function:
quality
offset of is,
reflect
the
different
Adjustment
Suggestion:
the
more difficult
neighboring
cells cell of In
reselection
tendency
general,
this
parameter
reselection
will
be cell will
Configuration
Rule:
neighboring
cells.
not
be
adjusted,
because
triggered.Different
value
can
reselection
difficult
level,In
cell
Adjustment
Suggestion:
Qoffset
can
be
used
to
be configured
by threshold
different
Function:
quality
reselection
tendency
general,
this
parameter
will
control
tendency
ofiscell
neighboring
cells,value
which
will
level
in the
HCS
If
the
not
beparameter
adjusted,
because
reselection
more
precisely.
reflect
the
different
Configuration
Rule:
cell
smaller,
cell be
reselection
will
Qoffset
can
usedlevel
to
tendency
of if the
reselection
difficult
be
triggered
easily;
and
control
the tendency
cell
neighboring
cells.
When
HCS
is
used,
ifofthe
parameter
value
is
bigger,
cell
reselection
more
precisely.
Adjustment
Suggestion:
In H
parameter
smaller,
reselectionvalue
will
beistriggered
general,
this be
parameter
willbe
criterion
will
fulfilled
easily
hardily.Different
value can
not
be
adjusted,
because
and
cell reselection
will be
configured
by different
Function:
cellbe
reselection
Qoffset
can
used
to
triggered
easily;
and
if the
neighboring
cells,
which
will
penalty
time
control
the
tendency
parameter
value
is
bigger,
reflect the different of cellH
Configuration
cell
reselection
precisely.
criterion
willmore
beRule:
fulfilled
reselection
tendency
ofhardily
reselection
difficult
and
cell reselection
will be
neighboring
cells. level
The
greater
this parameter
is,
triggered
hardily.Different
Function:
temporary
offset
in
Adjustment
Suggestion:
SIB
the
more
difficult
cell
value
canused,
be configured
cell
12 isreselection
not
so this by
reselection
willRule:
be triggered.
different
neighboring
cells,
Configuration
parameter
will
not
becell
Different
value
can
be
which
will
reflect
the
different
reselection
adjusted. difficult level, cell
configured
differentof
reselection by
tendency
neighboring
cells,
which willis,
neighboring
cells.parameter
The
greater this
reflect
the
different
Adjustment
Suggestion:
In
the
more difficult
cell
reselection
of will
general, thistendency
parameter
reselection
will
be
neighboring
cells.because
not
be adjusted,
triggered.Different
value can
Adjustment
Qoffset
can Suggestion:
beby
used
to In
be
configured
different
general,
thistendency
parameter
will
control the
of cell
neighboring
cells,
which
will
not
be
adjusted,
because
reselection
more precisely.
reflect
the different
Qoffset
cantendency
be used to
reselection
of
control
the
tendency
of cell
neighboring cells.
reselection
precisely.
Adjustment more
Suggestion:
In
general, this parameter will
not be adjusted, because
Qoffset can be used to
control the tendency of cell
network planning including

GSM cells'location, GSM
When best cell is
cell's signalling quality etc.. is
changed
default value.
New connection
network deployment.
Neighboring cells number
and neighboring cells priority
New connection
are taken into account in
default value.

network.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed

default value.
When system
information is
changed
No
No
No
No
No
Yes
No
Yes
No
Yes
No
Yes
Main
function: This
parameter
This parameter
indicates
indicates
the
time
of
Waiting
EUTRAN Neighbouring
Cell
for
RADIO
LINK
RESTORE
Object ID.
INDICATION..
Influence factor: cost time of
obtaining
physical
layer
This parameter
indicates
synchronization,
the feeling of
reference to
user,
wait time to ReUExternalEUtranCellTDD
establishment
the service.
object.
the probability of
synchronization failure and
the probability of call drop
may be increased.
Function:
The biggerThis
the parameter
parameter is,
indicates
the
the probabilitymeasurement
of
quantity
for
cell selection
and
Function:
Sintrasearch
synchronization
success may
This parameter
indicates
reselection.
Configuration
Tag.
be increased;
However,
when
Object
ID of Cell
Selection
Configuration
Rule:
theis bad,
Configuration
Rule:
the
radio
environment
and
Reselection
Information
accuracy
ofofmeasurement
Timeliness
measurements
the
RNC may
waist too long
quantity
used
for judgment.
and
consumption
of and
time the
to unnecessary
wait
The
measurement
quantity
battery
energy
of UEs.
increase
the wait
time
to Re-is
Cpich
EcNo
when
the
value
This
parameter
is
a
switch
establishment the service,
is"1"
.And whether
if the
value
is "1",
indicating
and influence
the
feeling
of
Cpich
EcNo
and
Cpich
RSCP
Sintrasearch
is
configured
or
user.
Function:
Intra-Frequency
must
fulfill
R criterion.
not.
If
the
value
is
False,
Measurement
Trigger
The
measurement
is
Sintrasearch
isCell
not quantity
configured
Threshold
for
Cpich
RSCP
when
the
value
to UE, and UE
performs the
Reselection
(Sintrasearch)
is"2"
.And Sintersearch
if the
value is "2".
intra-frequency
measurement
Function:
(dB)
.
Cpich
RSCP
must
fulfill R
periodically
according
Configuration
Tag.
Configuration
Rule: to the
criterion.
period
inicated
by the
Configuration
Rule:
Timeliness
of
measurements
Adjustment
Suggestion:
This
parameter
Treselections.
Timeliness
of
measurements
and
the consumption
of If
parament
sets
"1"
usually.
the
value
is True,
and
theenergy
consumption
battery
of UEs.of
Sintrasearch
configured
battery
energyis of
UEs. is to
If the parameter
value
UE,
and
UE
judges
whether
SInterSearchPre
is setted
bigger, measurements
for as
to
perform
the
intra-frequency
"true"
to
avoid
UE
power
intra-frequency
neighboring
Function:
Inter-Frequency
measurement.
consumption.
cells are easilyTrigger
triggered
Measurement
Adjustment
Suggestion:
It
If
the value
is
False,
which
causes
more battery
Threshold
for
Cell
would
be
set
False
for
cell
Sintersearch
is
not
configured
energy
consumption
,
and
Reselection (Sintersearch)
reselecting
quickly
when the
we
to
UE,
performs
vice
versa.
(dB)
. and UE
need.
inter-frequency
measurement
This
Configuration
Rule:
periodically
according
to the
parament isof
often
set big
to
Timeliness
measurements
period
the of
reselection
cell by
quickly.
and
theinicated
consumption
parameter
Treselections.
battery energy
of UEs. And
then
,
the
cell
reselection
would
quickly.
bigger,be
measurements
for
Function:
SsearchHCS
Adjustment
Suggestion:
It
inter-frequency
neighboring
Configuration
Tag.
Function:
Measurement
would
beeasily
set
False
for cell
cells
are
triggered
, and
Configuration
Rule:for
the
usage
Trigger
Threshold
HCS
reselecting
quickly
when
we
Function:
This
parameter
is a
vice
versa.
of
HCS.
Cell
Reselection
need.
switch
indicating
whether
Adjustment
Suggestion:
This
If
the parameter(dB)
value
(SsearchHCS)
. is
inter-RAT
information
parameter
isparameter
set by operator
"False", the
Configuration
Rule:
the
parameters
for cellcell
according toused
network
SSearchHCS
is not
camp.
reselection
are configured or
planning.
configured.
If
the parameter value is
not.
bigger,
inter-frequency
or
Configuration
Rule:
inter-RAT
measurement
will
Timeliness of measurements
be performed
easily, and
and
the consumption
of vice
versa.
battery energy of UEs
If
Pre" isis
If "SSearchHCS
the parameter value
"False",
this
parameter
is to
"True", UE judges whether
invalid.
perform inter-RAT
Adjustment
Suggestion:
This
measurement
based on the
parameter will
not be used.
parameters
configured
by
RNC.
"False ", UE performs the
inter-RAT measurement
periodically.
N/A
can not be
modified
N/A
At next use

layer synchronization, the
Re-establishment the
service.
At next use
Basic parameter
Cann't Modify
The default value is set to

guarantee the accuracy of
measurement quantity used
for judgment according to the
change of signal.
The parament is set
according to the cell camp ,
the Timeliness of
measurements and the
consumption of battery
energy
of Ues.is set
The parament
the Timeliness of
energy
of Ues.is set
The parament
the Timeliness of
energy
of Ues.is set
The parament
the Timeliness of
energy of Ues.
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
This function is not be used

as usual.
When system
information is
changed
The parament is set

according to the cell camp
and the consumption of
battery energy of Ues.
When system
information is
changed
The parament is set

according to the Timeliness
of measurements and the
energy of Ues.
When system
information is
changed
No
No
No
No
Yes
No
Yes
No
No
No
No
No
Function: Inter-System
Measurement Trigger
Threshold for Cell
Reselection (Ssearch, RAT)
(dB) .
Configuration Rule: The cell
camp and the consumption of
battery
energy
of RAT
UEs.
Function:
This
parameter
Function:
SHCS,
If
the
parameter
value
is
indicates
the
inter-RAT
Configuration Tag.
bigger,
measurements
measurement
triggering
Configuration Rule: Thefor
interneighboring
cells
threshold
for
HCS
cell to
qualityRAT
of Cpich
RSCP
are
easily
triggered
,
and
vice
reselection
(SHCS,
RAT)
judge .
versa.
used
UE to judge
If
the by
parameter
valuewhether
is
The
value
is configured
by
inter-RAT
measurement
"True",
"SHCSRat"
will be
network
planner.
should
be
performed.
used to judge
the
Function:
Highwhether
HCS Priority
Configuration
Rule:
measurementCell
of inter-RAT
Inter-system
Timeliness
of measurements
will be performed
in process
Measurement
Threshold
for
and
the
consumption
of
of cell
reselection.
Cell
Reselection
(Slimit,
battery
energy
of UEs.
SearchRAT)
(dB)
.
If the parameter
value is
Configuration
Rule:
bigger,
inter-RAT
Timeliness
of measurements
measurement
will be of
and the consumption
performed
easily,
and vice
Function:
This
battery energy parameter
of UEs.
versa.
indicates
whether
theif the
When HCS is used,
If
"SHCSRatPre"
is
"False",
Qrxlevmin-offset
will
be
parameter value is bigger,
this
parameter
is
invalid.
broadcast
in
SIB3.
measurement
on
inter
-RAT
Function: Qqualmin-offset
is
Adjustment
Suggestion:
HCS
Configuration
Rule:
the
risk
of
neighbofing
cells
of
high
used for restricting PLMN
will
not will
be used.
The
default
re-selection
ping
pong.
priority
be
triggered
ping-pong
reselection
when
value
is and
recommended.
If
theselection
parameter
is
easiler,
vice
versa.
cell
andvalue
reselection.
Open,
cell
reselection
to
Adjustment
Suggestion:
HCS
In
cell selection
and
higher
PLMN
is
will notpriority
be used.
The
default
reselection:
Squal
= cells
harder
fulfilled
,
and
vice
value
is
recommended.
Qqualmeas (Qqualmin +
versa.
QqualminOffset)
.
Function:
This
parameter
Adjustment
Suggestion:
Thisof
Configuration
Rule:
the risk
indicates
whether
the
parameter
will
not
be
used.
re-selection
ping will
pong.
Qrxlevmin-offset
be
Function:
QrxlevminOffset
If
the
parameter
value
is is
broadcast
in
SIB3.
used
for
restricting
PLMN
smaller,
cell reselection
to of
Configuration
Rule: thewhen
risk
ping-pong
reselection
higher
priority
PLMN
cells
is
re-selection
ping pong.
cell
selection
reselection.
easier
fulfilledand
, and
vice
If
the
parameter
value
is
In
cell selection and
versa.
Open,
cell reselection
reselection:
Srxlev = to This
Adjustment
Suggestion:
higher
priority
cells +is
Qrxlevmeas
PLMN
(Qrxlevmin
Function:
Reselection
parameter
will
not
bevice
used.
harder
fulfilled
,
and
QrxlevminOffset)
Hysteresis
1
of
Serving
Cell
versa.
Pcompensation.
(QHyst1s)
(dB)
.
Adjustment
Suggestion:
This
Configuration
Rule:
the
risk
Configuration
Rule:
the
risk of
of
parameter
will
not
be
used.
re-selection
ping
Function:
Reselection
re-selection
ping pong.
pong, the
If
the parameter
value isCell
Hysteresis
1 of Serving
change
of signal.
smaller,
cell
reselection
for
UE
in
CELL_PCH
or to
The greater these hysteresis
higher
priority
PLMN
cells
URA_PCH
State
(QHyst1s,
parameters, the less likely is
the
easier
fulfilled
would
rePCH)
(dB)
. and
cell reselections
occur,
and
selection
pongfading
, and
vice
Configuration
Rule:
the
risk
of
the betterping
the slow
Function:
Reselection
versa.
re-selection
ping
pong,
the
resistance capability, but the
Hysteresis
1Suggestion:
of Serving
Cell
Adjustment
This
change
of signal.
slower the
reaction
to the
for
UE
in
CELL_FACH
State
parameter
will
not
be
used.
The
greater
these
hysteresis
environment changes.
(QHyst1s,
(dB)
. If the
parameters,
the less
likely
the
AdjustmentFACH)
Suggestion:
Configuration
Rule:
the
risk of
cell
reselections
occur inthis
signal
fluctuate quickly,
re-selection
ping
CELL_PCH,
and pong,
the
parameter should
be better
setthe
change
of
signal.
the
slow
fading
resistance
larger.
The
greater
these
hysteresis
capability,
but
the slower
the
Function:
parameters,
theenvironment
less likely the
reaction toReselection
the
Hysteresis
2 of Serving
cell
reselections
occur inCell
changes.
(QHyst2s
s)
(dB)
. the better
CELL_FACH,
and
If the
Configuration
Rule:
the this
risk of
the
slow
fading
resistance
signal fluctuate quickly,
re-selection
ping
capability,
thepong,
slower
the
parameter but
should
be setthe
change
of
signal.
reaction
larger. to the environment
If
the parameter value is
changes.
smaller,
cell Suggestion:
reselection isIf the
Adjustment
easily
in
signal triggered
fluctuate quickly,
this
CELL_DCH,
and vice
versa.
parameter should
be set
Adjustment
Suggestion: If the
larger.
signal fluctuate quickly, this
larger.
The parament is set

When system
information is
changed
This parameter will not be

used.
When system
information is
changed
The parament is set

according to the Timeliness
of measurements and the
energy of Ues.
When system
information is
changed
The parament is set

When system
information is
changed

used.
When system
information is
changed
The parament is set to

decrease the risk of reselection ping pong.
When system
information is
changed

used.
When system
information is
changed
The parament is set to

decrease the risk of reselection ping pong.
When system
information is
changed
The parament is set

When system
according to the velocities of
information is
cell selection, the risk of rechanged
selection ping pong.
The parament is set
When system
information is
The parament is set
When system
information is
The parament is set
When system
information is
No
No
No
No
No
Yes
No
Yes
No
Yes
No
No
for UE in CELL_PCH or
URA_PCH State (QHyst2s,
PCH) (dB) .
Configuration Rule: the risk of
re-selection ping pong, the
change of signal.
Function:
Reselection
The greater
these hysteresis
Function:
This
Hysteresis
2 the
ofparameter
Serving
Cellthe
parameters,
less likely
indicates
the
cell
reselection
for
UE
in
CELL_FACH
State
cell
reselections
occur in
Function:
This
parameter
timer
value.
UE
shall
reselect
(Qhyst2s,
FACH)
(dB)better
.
CELL_PCH,
and
the
indicates
the
cell
reselection
the
new
cell
if
the
new
Configuration
Rule:
thecell
riskisof
the
slow
fading
resistance
timer
value
the
UE
shall
use
better
ranked
than
the
serving
re-selection
ping
the
capability,
but
thepong,
slower
the
in
RRC
connected
mode
cell
according
to
the
cellchange
of
signal.
reaction
to
the
environment
states
CELL_PCH
andis a
ranking
criterion value
R during
If
the parameter
changes.
URA_PCH
if
provided
time
interval
indicated in
byisIf the
smaller,
cell
reselection
Adjustment
Suggestion:
Function:
This
parameter
SIB4,
otherwise
Treselections
Treselections.
easily
triggered
in
signal
fluctuate
quickly,
this
indicates
the cell
reselection
shall
be
used.
UE
shall
Configuration
Rule:
the
risk of
CELL_FACH.
parameter
should
be
set
timer
value
the
UE
shall
use
reselect
the
new
cell
if
the
re-selection
ping
pong,
the
Adjustment
Suggestion:
If the
larger.
in
RRC
connected
mode
new
cell
is
best
ranked
change
of signal.
signal
fluctuate
quickly,
this
state
if provided
according
to
the is
cell-ranking
If the CELL_FACH
parameter
too
low,
parameter
should
be
set
in
SIB4,
otherwise
criterion
R
during
a
time
ping-pong
reselection
will be
larger.
Treselections
shalland
interval
indicated
bybe
the
cell
happened
easily,
ifused.
the
UE
shall
reselect
the
new
cell
reselection
value.it may
parameter istimer
too high,
ifConfiguration
the
new
cell
is
best
ranked
Rule:
result in too long
cellthe risk of
according
the cell-ranking
re-selection
ping
pong,
reselectiontodelay,
whichthe
criterion
R
during
a
time
change
of
signal.
influences the normal
interval
indicated
by
thelow,
cell
If
the
parameter
is
too
operation of cell reselection.
reselection
timer
value.
ping-pong
willIt be
Adjustmentreselection
Suggestion:
will
Configuration
Rule:
the
risk
happened
easily,
and
if the
be set smaller
to reslect
cellof
re-selection
pong,
parameter
isping
too high,
itthe
may
Function:
Dependent
quickly onSpeed
speedway
(or
other
change
of
signal.
result
in
too
long
cell
Scaling
Factor
for
high-speed
scenes.)
If
the parameter
iswhich
too low,
reselection
delay,
Treselection
Configuration
ping-pong
influences reselection
the normal will be
Tag.
happened
easily,
and
if the
operation of
cell
reselection.
Configuration
Rule:
the
parameter
is
too
high,
it may
Adjustment
Suggestion:
It will
velocity
ofSpeed
Ues.
function:
Dependent
result
in
too
long
cell
be
set
smaller
to
reslect
If
the
parameter
value
is
Scaling
Factor
for which cell
reselection
delay,
quickly
on
speedway
other
"True", "SpSf" will be (or
used
in
Treselection.
influences
the
normal.Thein
high-speed
scenes.)
calculate
the
treselection
Configuration
Rule:
the
risk
of
Function:
Inter-frequency
operation
ofofcell
default
value
is
HCS
state
highreselection.
mobility.
re-selection
ping
pong,
the
Scaling
Factor
for
Adjustment
Suggestion:
It will
recommended.
Adjustment
Suggestion:
This
velocity
of Ues.
Treselection
Configuration
be
set
smaller
to
reslect
cell
parameter
will not
be used.
If
the parameter
value
is other
Tag.
quickly
onThis
speedway
(or
Function:
parameter
smaller,
cellscenes.)
reselection
If
the parameter
valuefactor
iswill for
high-speed
.The
indicates
thequickerly,
scaling
be
triggered
and
"True",
"InterFreqSf"
will
be
default
value is timer for the
cell
reselection
vice
versa.
used
in
calculate
the
recommended.
inter-frequency
case.
Adjustment
Suggestion:
This
treselection
in Rule:
HCS state
of
Configuration
the
parameter
will
not
be
used.
high
mobility.
velocities of Ues, the risk of
If the parameter
re-selection
pingvalue
pong,isthe
"False",
"InterFreqSf"
will not
change of
signal.
be
used
in
calculate
the
Function:
Inter-RAT
Scaling
If the parameter
value
is
treselection
in
HCS statewill
of
Factor
Treselection
smaller,for
cell
reselection
high
mobility.
Configuration
Tag.
be triggered easily and the
Adjustment
Suggestion:
This
If
theofparameter
value
risk
re-selection
pingispong
parameter
will
not
be
used.
"True",
"InterRatSf"
will
be
would
encrease.
Function: Inter-RAT Scaling
used
calculate
the is
If
the in
parameter
value
Factor
for
Treselection.
treselection
in Rule:
HCS state
bigger, cell reselection
Configuration
thewillofbe
high
mobility.
triggered
hard
thethe
riskrisk
of revelocities
of Ues,
of
If
the parameter
value
isthe
selection
ping
pong
would
re-selection
ping
pong,
"False",
"InterRatSf"
decrease.
change
of
signal. forwill not
Function:
Duration
be
used
in
calculate
theis This
Adjustment
Suggestion:
If
the parameter
value
Evaluating
Allowed
Amount
treselection
in
HCS
state
of of
parameter
will
not
be
smaller,
cell
reselection
will
Cell
Reselection
(s) inused.
Case
high
mobility.
be
triggered easily
the
of
Non-HCS
Usageand
(NonAdjustment
Suggestion:
This
risk
of
re-selection
ping
pong
HCS_TCRmax)
(s)be
. used.
parameter
will
not
would
encrease.
Configuration
Rule: the
If
the
parameter
is of
velocities of Ues,value
the risk
bigger, cell reselection
re-selection
ping pong, will
thebe
triggered
and the risk of
risk of callhard
drops.
call
would value
encrease.
If thedrops
parameter
is
Adjustment
Suggestion:
smaller, UE will enter theThis
high
parameter
will not be used.
mobility hard.
bigger, UE will enter the high
mobility easily.
parameter will not be used.
The parament is set

When system
information is
The parament is set
When system
information is
To guarantee the time of cell
When system
selection, and to decrease
information is
the risk of re-selection ping
changed
pong .
When system
information is
changed
pong .
When system
information is
changed
pong .
This function is not be used

as usual.
The parament is set
Ues, the risk of re-selection
ping pong and the change of
signal.
pong .This parameter will not
be used.
The parament is set
signal.
pong .This parameter will not
be used.
The parament is set
signal.
The parament is set
ping pong and the risk of call
drops.
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
When system
information is
changed
No
No
Yes
No
No
No
Yes
Yes
No
No
No
No

indicates the maximum
number of cell reselections in
case of Non-HCS usage.
Configuration
the
Function: ThisRule:
parameter
velocities
of
Ues,
the
risk
of
indicates the additional
time
re-selection
ping
pong,
the
period before the UE can
risk
of to
call
drops.
revert
low-mobility
If
the
parameter
measurements invalue
caseisof
smaller, UE
will enter the high
non-HCS
usage.
mobility
easily.Rule: the
Configuration
If
the
parameter
value
is of
Function:
This
parameter
velocities of
Ues,
the risk
bigger,
UE
will
enter
the
high
indicates
whether
HCS
re-selection ping pong, the
mobility
hard.
serving
cell
information
is
risk of call drops.
Adjustment
Suggestion:
configured
or
not.value is This
If the parameter
parameter
be used.
If
the parameter
value
is low
smaller,
UEwill
willnot
enter
the
"True",
will be used and
mobilityHCS
easily.
Function:
This
parameter
H
criterion
will be
fulfilled
If the
parameter
value
is in
indicates
the
period
for
process
of
cell
reselection.
bigger, UE will enter
the low
evaluating
allowed
amount
If
the parameter
value
is of
mobility
hard.
cell
reselection
(s)
in
case
of
"False",
HCS
will
not
be
Adjustment Suggestion: used
This
HCS
usage.
and
H criterion
willbe
notused.
be
Function:
This
parameter
parameter
will not
Configuration
Rule:ofthe
fulfilled in the
process
cell
indicates
maximum
velocities
Ues
and the in
reselection.
number
ofofcell
reselections
change
of
signal.
Adjustment
Suggestion:
This
case of HCS usage.
If
the parameter
value
is
parameter
willRule:
not
bethe
used.
Configuration
smaller,
enter
the high
velocitiesUE
of will
Ues,
the risk
of
mobility
easily,
and
vice
Function:
This
parameter
re-selection
ping
pong, the
versa.
indicates
additional time
risk of callthe
drops.
Adjustment
Suggestion:
duration
before
UEis This
If the parameterthe
value
parameter
will
not
be
transits
from
high-mobility
smaller, UE will enter used.
the high
state
to low-mobility
state in
mobility
easily.
case
HCS
If
the of
parameter
value is
Function:
Cellusage.
Barred
Configuration
bigger, UECell
willRule:
enterthe
the high
Indicator.
velocities
of Ues and to
thethe
mobility hard.
change
of
signal.
Adjustment
Suggestion:
This
barred
cell will
be prohibited,
If
the
parameter
value
isis
parameter
willtonot
becell
used.
but
handover
the
smaller,
willparameter
enter the low
Function:
The
allowed. UE
mobility
easily,
and
value
is
"Intra-frequency
Configuration Rule: vice
This Cell
versa.
Reselection
forby
parameter isIndicator"
determined
Adjustment
enabling
UESuggestion:
to register inThis
the operator.
parameter
will not
be used.
intra-frequency
cells.
If the parameter
value
is
Configuration
Rule:
the be
"Barred", users will not
continuity
cell cell.
selection.
accessed of
in the
Function:
This parameter
If
is parameter
set "Allowed",
it would
If itthe
value
is "Not
indicates
the posibility
barred
of a
decease
the
of call
Barred", users
will betime
barred
cell.
Cell
drops
withinthe
accessed
theintra-frequency
cell.
to theis
reselection.
barred
cell
will
be
prohibited,
If
it
is
set
"Not
Allowed",
cell reservation extensionit
but
handover
tothe
theposibility
cell is
would
increase
indicator.
allowed.
of call drops without
the intraConfiguration
Rule: This
Configuration
Rule: The by
frequency reselection.
parameter
is determined
planning
of
operator.
Function:
This
parameter is
the operator.
When
the
cell
is
barred,
the
access
class
barred
If it is set 'reserved',
if theif the
parameter
is
larger,
the
indicator
for
AC0~AC15.Cell
value of Intra-frequency Cell
barred
time of
a barred
cell
to
Reselection
Indicator
is the
'not is
longer.
barred
cell
willshall
be prohibited,
allowed',
UEs
behave as
but
handover
to the cell
if cell
status "barred"
is is
allowed.
indicated. And if cell status
Configuration
Rule:isThis
status 'not barred'
indicated
parameter
is determined by
, the "Cell Reservation
the
operator.
Extension"
is invalid.
If
the corresponding
bit isThis
"0",
Adjustment
Suggestion:
which
means
, the
parameter
will"barred"
not be used.
UE with this access class is
This
parameter
indicates the
not permit
to access.
Hspa
Configuration
If the correspondingIn
bitAisCell
"1",
Object
ID.
which means "not barred" ,
the UE with this access class
is not permit to access.
The parament is set

drops.
The parament is set
drops.
used.
When system
information is
changed
When system
information is
changed
When system
information is
changed
The parament is set

When system
information is
Ues and the change of
changed
signal.
The parament is set
according to the velocities of When system
Ues, the risk of re-selection information is
ping pong and the risk of call changed
drops.
The parament is set
When system
information is
Ues and the change of
changed
signal.
"Barred", users will not be
accessed in the cell.
When system
information is
changed
When system
To guarantee the continuity of
information is
cell selection.
changed

information is
planning.
changed
When system
This parameter is determined
information is
by the operator.
changed

"Barred", users will not be
accessed in the cell.
When system
information is
changed
Basic index
Cann't Modify
No
No
No
No
No
Yes
No
No
No
No
No
No
number are satisfied.

If HsVsR99CdPriIn is set to
"Supported" and the number
of HS-PDSCH code used is
smaller than the threshold for
Function:
This parameter
code fairness
indicates
the
cell related)
minimum
(NumofHspdsch
,
number
of the HS-PDSCHs.
HSDPA service
is given the
Congfiguration
Rule:
high priority to use
theHSDPA
code
service
resourcethroughput
comparedcongestion
with R99
probability,
HSDPA service
service.
average
throughput,
R99
Configuration
Function:
ThisRule:
parameter
service
DPCH
code
If the parameter
too big, a
indicates
the cellismaximum
congestion
probability.
few
HSDPA
services
may use
number
of the
HS-PDSCHs
Adjustment
Suggestion:
up all free SF16
codes
which
Configuration
Rule:
Traffic
The
larger the
parameter
downgrades
the
R99 PS is,
load
more
codes
are reserved for
service
throughput.
Adjustment
Suggestion:
Function:
This
parameter
HSDPA
services;
If
the parameter
is
small,
Usually,
inthe
order
to too
make
the
indicates
E-AGCH
The
smaller
the number
parameter
is,
the
HS-PDSCH
will
best
use
of
free
codes,
the
number
more
codes
are
available
for
be
around
a
small
value
parameter could
take
the
Configuration
Rule:
Traffic
DPCH.
which
downgrades
value
the licensethe
HSload of
HSDPA
service
throughput.
PDSCH
number
bought by
Function:
This
parameter
Adjustment
Suggestion:
Each
Function:
This
parameter
the
vendor.
But
it
could 16-25
be
indicates
the
average
E-AGCH
can
schedule
indicates
of the
reduced
ifthe
there
are
lots
ofthe
throughput
ofnumber
one
HS-PDSCH
HSUPA
users.
The
larger
E-RGCH/E-HICHs
DPCH
code
congestion.
channel.
parameter is, the
more
Configuration
Rule:
Traffic
Configuration
HSUPA
users
can
beWireless
Function:
ThisRule:
parameter
load
environment,
adminssion
admitted
in
cell.
But theEach
less
indicates
theaSuggestion:
HS-PDSCH
Adjustment
control,
code
resource
the
downlink
channelization
code
resource
is
shared
E-RGCH/E-HICH
can bear 20
management
codes
could
beThe
used
bysame
other
among
the
cells
of the
HSUPA
users.
larger
Adjustment
Suggestion:
Itthe
is
downlink
physical
channels.
NodeB.
parameter
is,
the
more
used
in
the
Admission
Control
Configuration
Rule:beNodeB
HSUPA
users
to
calculate
thecan
throughput
of
capability,
HSDPA
traffic
admitted
in
a
cell.
But
theload
less
current
HS-PDSCHs
and
in
Function:
This
parameter
of
the
cells ofchannelization
the same
the
downlink
the
Code the
Resource
indicates
HS-SCCH
NodeB
codes
could
be
by other
Management
to used
calculate
the
number
Adjustment
Suggestion:
Ifinitial
downlink
physical
channels.
Parameter
Function:
the
maximum
and
minimum
HSConfiguration
Rule:
NodeB
this capability
and
value
ofhas
the
transmission
PDSCH
number.
If
it is
too
big,total
thetraffic
code load of
the
total
HSDPA
power
of HS-PDSCH,
HSThe
average
throughput
of
Parameter
The
allocated
HS-SCCH
can
the
cells
oftoFunction:
the
same
NodeB
SCCH,
E-AGCH,
E-RGCH
one
HS-PDSCH
channel
parameter
the
notnot
behigher
usedindicates
by
other
is
than
the
and
E-HICH
codes.
should
only
determined
by the
minimum
total
transmission
channels.
maximum
capacity
of
these
Configuration
Rule:
The
wireless
channel
quality.
power
preserving
for
HSPA,
If
it is the
too parameter
small, the number
cells,
couldSobe
configuration
of can
this
the
default
value
is
set
mainly
consider
the
power
of
HSDPA
user
be
set
to "Sharing"
parameter
need
to
consider
according
the
lab2ms
testand
and
balance
ofto
HS
channal
scheduled
in
each
subthe
quality
and
capacity
field
results.and the of
DCH
channal.
frametest
is limited
R99
andthroughput
HSDPA
services.
Increasing
theRule:
value:
More
Configuration
The
HSDPA
can
not
Adjustment
Suggestion:
HSDPA
users
could
be
configuration
of
this
reach the peak
value.the
Parameter
Function:
When
theand
HSPA
total
admitted
HSDPA
parameter
need
to
consider
maximum
value
of
the
total
downlink
power
is
allocated
throughput
congestion
isof
the
quality
and
capacity
transmission
power
of
HSused
the
method
of "RNC
more
difficult
to
trigger,
and
R99
and
HSDPA
services.
PDSCH,
HS-SCCH,
E-AGCH,
Parameter
Function:
This if
dynamic
assigning
mode",
the
cell
load
in
load
balance
Adjustment
Suggestion:
E-RGCH
and
E-HICH
codes.
parameter
indicates
this
parameter
ismin
toothe
small,
is
lower.
the
and
max
When
theBut
HSPA
total
Configuration
Rule:
The
threshold
of
non-serving
Ethe
HSDPA
total
power
would
HS-PDSCH
number
will
be
downlink
power
is
allocated
configuration
of this
DCH
total
E-DCH
power
be
tooto
small,
and
it might
increased
which
leads
to
used
the
method
of
"RNC
parameter
need
to
consider
ratio.
reduce
the
quality
and
higher
probablity
of
R99
Dynamic
Assigning
the
quality
capacity
of
Configuration
Rule:
capacity
of and
HSDPA
service.If
DPCH
code
congestion.
Mode".Larger
value
of this
R99
and
HSDPA
services.
This
parameter
no
this
parameter
ishas
too
big,can
the
Because
the
min
HS-PDSCH
parameter,
more
power
Adjustment
Suggestion:
relation
to
the
overload
HSDPA
total
power
would
be
number
is
increased,
the
be used
byHSPA
HS subscriber,
When
the
totalreduce
control.
too
big,
and
it trigger
might
average
user
throughput
will
more
easy
to
the
rate
downlink
power
is allocated
This
parameter
configuration
the
quality
capacity
of
be
increased
when
decrease
ofand
R99
subscriber,
used
the
method
of there
"RNCare
mainly
consider
HSUPA
R99
service.
only
a few
HSDPA
so
the
KPIAssigning
of DCH users.
subscriber
Dynamic
Mode",
if
scheduling:
The
users
in
When
the
HSPA
total
When
the
HSDPA
user
is
bad.
But
if
the
value
of the
this
this
parameter
is
too
small,
macro
diversity
is
downlink
isbecasue
allocated
number
ispower
large,
parameter
istotal
setstatus
too
small,
the
HSDPA
power
would
always
about
40%
of
the
used
the
method
of
"Node
B
there
is
no
Streaming
HSDPA
thetoo
power
allocated
to HStotal
be
small,
and
it
might
users
in
the
cell,
for
the
users
Assigning
Mode",
this
service,
changing
the
subscriber
is
little,
it
will
affect
reduce
the
quality
and
contains
HS
users
and
parameter
is
invalid.
parameter
value
notDCH
affet
the
throughput
ofwill
HS
capacity
of
HSDPA
service.
users,
the
HS
users
is
aboutIf
the
average
user
throughput
subscriber
when
the
resource
this
parameter
is too
big, the
15%
in the macro
diversity
obviously.
is
little.
HSDPA
total
power
would
status,
soverser.
itHSPA
allocated
15%be
And
vice
When
the
totalreduce
too big,
and
itusers
might
power
to
HS
in
nondownlink
power
is allocated
the
quality
and capacity
of
serving
used
thecell.
method of "NodeB
R99
service.
Adjustment
Suggestion:
Assigning
this
When
the Mode",
HSPA
total
The
larger
this
parameter
is,
parameter
is
invalid.
downlink
the more power
power is
is allocated
allocated to
used
the method
of "NodeB
the users
in the macro
Assigning Mode", this
5 can satisfy the HSDPA

throughput requirement and
also will not occupy too much
code to affect R99 PS
service throughput.
Take effect after

the change is
loaded to the
RNC
It should be set to 1 unless

fixed number of HS-PDSCH
is required to allocate to HSPDSCH by the operator.
Take effect after

the change is
loaded to the
RNC
Take effect after

the change is
N/A
Take
effect
after
loaded
to the
the
change
is
RNC
1 E-AGCH can schedule 16- loaded to the
25 HSUPA users and save
RNC and the
the channelization code
PHYSICAL
resource. It should be set to SHARED
Take effect after
(EdchTrafLimit/16~25) if
CHANNEL
the change is
EdchTrafLimit
is
required
to
RECONFIGURAT
1 E-RGCH/HICH can
loaded to the
support.
ION
schedule 20 HSUPA users
RNCREQUEST
and the
is sent
and save the channelization message
PHYSICAL
to
NodeB
code resource. It should be
SHARED
set to (EdchTrafLimit/20) if
CHANNEL
EdchTrafLimit is required to RECONFIGURAT
support.
ION REQUEST
Take
effect
message
is after
sent
the
change is
to
NodeB
N/A
Take
effect
after
loaded
to the
R99+HSDPA: Two users
the
change
is
RNC
could be scheduled at the
loaded to the
same time to make the best
RNC and the
use of HS-PDSCH. And the
PHYSICAL
codes allocated to HS-SCCH
SHARED
are not too much to affect
CHANNEL
other services.
RECONFIGURAT
HSDPA: 3 provides better
ION REQUEST
experience for the HSDPA
Take
effect
message
is after
sent
The
throughput of one HSusers.
the
change is
to
NodeB
PDSCH is about 700 kbps in
loaded to the
the lab test.
RNC
the balance of service quality
and capacity between R99
and HSDPA services.
and capacity between R99
and HSDPA services.
The
users in the
macroR99
and capacity
between
diversity
status
is always
and HSDPA
services.
about 40% of the total users
in the cell, for the users
contains HS users and DCH
users, the HS users is about
15% in the macro diversity
status, so it allocated 15%
power to HS users in nonserving cell.
Immediately
Immediately
Immediately
Immediately
No
No
No
No
Yes
Yes
No
Yes
No
No
No
No
principle of scheduling is that

the total rising RTWP caused
by the uplink services should
The
value represents
not exceed
this target the
value.
number
of SF512
This
The involved
factorcodes.
for setting
parameter
is
used
to
reserve
this parameter: E-DCH
some
free represents
codes
for the
The
value
the
Throughput,
UL Interference
DPCH
in
the
procedure
number
of of
SF512
codes.ofby
This
increment
cell caused
increasing
the
number
of the
parameter
is used
in the
E-DCH service
HS-PDSCHs
based
on code
procedure
decreasing
the
Influence ofofthis
parameter:
occupation
ratio
of
the
HSnumber
of
the
HS-PDSCHs
The
larger
value
of
this
Parameter
Function:
This
PDSCH
NonHS-PDSCH
based
onand
code
occupation
parameter,
the
larger
uplink
parameter
indicates
the
DN
channels.
The
value
of this
ratio
of
the
HS-PDSCH
and
interference
and
the
larger
E(Distinguish
Name)
refer
tofree
parameter
represents
the
NonHS-PDSCH
channels
to
DCH
throughput
of
the
cell;
limiting
HSDPA
GBR in
resource
SF512
code
number
the
avoid
DPCH
code
congestion.
The
smaller
of
this
parameter,
Function
of this
parameter:
it
consumption
parameters
code
tree.
The
value
of
this
parameter
the less uplink
interference
indicates
whether
to
drop
the
profile.
Congfiguration
Rule:SF512
HSDPA
represents
the
free
and
theorless
E-DCH
DPCH
F-DPCH
code
of the
service
throughput
congestion
code
number
code tree.
throughput
of in
thethe
cell
link
over
Iur.
probability,
HSDPA
service
Congfiguration
Rule:
HSDPA
Suggestion
for setting
thisthe
Factors
of
consideration:
average
throughput,
R99
service
throughput
congestion
parameter:
The larger
value
ratio
of
services
drop,
the
service
DPCH
code
probability,
HSDPA
service
of this parameter,
the
larger
throughput
HSDPA.
Function
of of
this
parameter:
it
congestion
probability.
average
throughput,
R99
uplink
interference
and
the
If
the
operator
turn
on
this
indicates
whether
dedicated
If
the
parameter's
value
is
too
service
DPCH
code theof
larger
E-DCH
throughput
function,
it will
E-DCH
therelease
E-AGCH
of
big,
the use
HS-PDSCH
number
congestion
probability.
the
cell;
3dB
is
suggested
DPCH
or
F-DPCH
code there
of for
the
common
E-DCH
in
will
not
increase
unless
If
theover
parameter's
is too
indoor
cells;
6dB
isvalue
suggested
link
Iur
in
the
process
of
Cell_FACH
are
many
free
codes
incan
thebe
big,
the
HS-PDSCH
for outdoor
cells;
8dBnumber
code
re-assignment,
this
will
Factors
of
consideration:
the
code
Inparticular
this case,
the
will
betree.
decreased
when
there
set in
some
scene
increase
the
throughput
of
downlink
channelization
code
free
codes
can
not
be
used
are
still
many
free
codes
in
to improve
cell but
E-DCH
HSDPA
in
cell,
it
will
resource,
the
scheduling
of
by
HS-PDSCH
sufficiently.
Parameter
Function:
This
the
code
tree.
In
this
case,
throughput.
increase
the ratio of
services
UE
in
time
If
the
parameter's
value
is
parameter
indicates
theusedtoo
the
free codes
are not
drop.
When
this
parameter
is set
small,
the
code
reserved
for
maximum
number
of
users
by
DPCH
sufficiently
If
the
operator
turn E-DCH
offand
thisthe
to'OFF',
dedicated
DPCH
is
not
enough
and
the
with
traffic
on
common
EHS-PDSCH
number
may not
function,
itof
will
notchannel
release
the
use
the
different
possibility
DPCH
code
DCH
in
enhanced
uplink
be
increased
even
if
DPCH
DPCH
or
F-DPCH
code
of
the
code
of
common
allocation
failure
(DPCH
CELL_FACH
state
in E-DCH.
the code
cell.
used
fewthe
codes.
link
over
Iur
in
the
process
of
When
this parameter
is
set
congestion)
will
increase.
Configuration
Rule:
Itthis
needs
If
the re-assignment,
parameter's
value
iswill
too
code
to'ON',
One
of E-AGCH
in
to
consider
the
maximum
small,
the
HS-PDSCH
limit
the
throughput
of HSDPA
dedicated
E-DCH
use
the
enhanced
uplink
CELL_FACH
number
willnot
notimpact
be decreased
, but itchannel
will
the
ratio
Parameter
Function:
same
code
ofThis
Euser
number
that
can
unless
mostdrop.
of
theNodeB
free
codes
of
services
parameter
indicates
the
AGCH
in
the
common
Esupport
inby
one
cell. towhich
are
DPCH,
It
is used
recommended
set the
Maximal
E-DCH
DCH,
thisScheduled
will
save
one
The
larger
of
the
value,
the
increased
the
possibility
of
value
to
'Off'
if
there
only
a
User
Number
incode
CELL_DCH
channelization
resource
Parameter
Function:
This
more
of
enhanced
uplink
DPCH
code
allocation
failure
few
neighbouring
cells
to
state
that
can
be
scheduled
of
SF256,
but
the
waitting
Function:
Indicate
whether
parameter
is a
switch
which
CELL_FACH
users
can
admit
(DPCH
code
congestion)
.
reduce
the
possiblity
of call
Per
E-AGCH..
time
ofcell.
E-AGCH
information
NodeB
supports
indicates
whetherto
a
in
the
drop.
Otherwise,
it can
be set
Configuration
Rule:
needs
in
Collision
resolution
of
dynamically
allocate
HScongested
can Ittrigger
The
less ofuser
the
value,
the less
to
'On'
to
consider
the
Maximal
Common
E-DCH
phase
may
PDSCH
channelization
code.
forced
RAB
transferring
to
of enhanced
uplink
Scheduled
E-DCH
User
above
the
Maximum
period
Configuration
Rule:
NodeB
FACH
of the online
CELL_FACH
users I/B
canusers
admit
Number
in CELL_DCH
state
forthe
collision
resolution phase
capability
in
cell.
cell;
that
can
scheduled
Per
Ewhich
willbemake
the It
UE
Adjustment
Suggestion:
It It's
Configuration
Rule:
needs
Suggestion:
AGCH.
release
the
resources.
should
set
to
"Support"
to
consider
whether
the ifrate
set
to the
maximum
The
larger
of
the
value,
NodeB
hasuplink
the
capability.
of
success
call
setup
of the
high
enhanced
CELL_FACH
more
E-DCH
User
can
priority
users that
and NodeB
affectbe
the
user number
can
carried
one as
E-AGCH,
service
quality
few as but
supporton
in one
cell.
overabundance
of E-DCH
possible
at the same
time.
User
Perthe
E-AGCH
may
lead
Turn on
function,
when
bad
E-DCH
QoS.
The
less
pre-emption should be doneof
the
the
less
E-DCH
Function:
parameter
andvalue,
forcedThis
handover
can not
User
can
be
carried
on oneI/B
Eindicates
the
cell
maximum
be triggered, forced online
AGCH,
and
the
better
E-DCH
number
of
the
E-AGCH
service transferring to
QoS can be got;
Configuration
Rule:
CELL_FACH
can
beMaximum
done. It
Configuration
Suggestion:
HSUPA
number
protectsuser
the rate
of successIt's
set
the Maximal
Scheduled
Adjustment
call to
setup
ofSuggestion:
high priority
Function:
This
parameter
E-DCH
User
Number
incould
Usually,
the
parameter
users, but it would affect
the
indicates
the
cell
maximum
CELL_DCH
state
that
can be
take
the
value
of
the
license
service quality, and it might
number
of the
scheduled
Per
E-AGCH
by
HSUPA
user
number
cause RACH
orE-RGCH/HICH
FACHdivided
Configuration
Rule: Maximum
NodeB
by
UserNumPerEagch.
But it
channel
congestion.
HSUPA
number
could
beuser
reduced
if there
are
Turn off
the
function,
when
Adjustment
Suggestion:
lots
of
DPCH
code be done
pre-emption should
Usually,
thehandover
parameter
could
congestion.
and forced
can
not
take
the
value
of
the
license
be triggered, only call drop
HSUPA
user number
divided
can be triggered,
if only
call
by
20.
But
it
could
be
drop can be done, thereduced
call
ifdrop
there
are
lots
DPCH code
rate
will
beofrise.
congestion.
the value of this parameter is

the balance between the cell
Immediately
E-DCH throughput and the
cell UL interference
N/A
Immediately
The spared codes may be

enough for a CS64k service
or 4 AMR services or 8
HSDPA associated DPCH.
Take effect after

the change is
loaded to the
RNC
The spared codes may be

enough for a CS64k service
or 4 AMR services or 8
HSDPA associated DPCH.
Take effect after

the change is
loaded to the
RNC
Take effect after

make sure the ratio of service the change is
drop
loaded to the
RNC
When system
information type 5
is changed.and
In order to save the downlink
Take effect after
channelization code resource
the Physical
shared Channel
Reconfiguration
It's set to the maximum
enhanced uplink
CELL_FACH user number
Immediately
Take effect after
that NodeB can support in
the change is
one cell.
loaded to the
RNC and the
NodeB must
N/A
support the
function of
dyanamically
allocate the HSIt's set to the Maximal
PDSCH code
Scheduled E-DCH User
on NodeB
Number in CELL_DCH state based
Immediately
that can be scheduled Per EAGCH
bythe
NodeB
Because
HSUPA number
will not change too rapidly
Take effect after
normally and the E-AGCH
the change is
and E-RGCH/HICH number
loaded to the
will be changed periodically,
RNC
the function is set to "Close"
default.
Take effect after
the value of EdchTrafLimit
the change is
and switch off the dynamic
loaded to the
adjustment function
RNC
the value of EdchTrafLimit
and switch off the dynamic
adjustment function
Take effect after

the change is
loaded to the
RNC
No
No
No
No
No
No
No
No
No
No
No
Yes
indicates the threshold to

could be increased
if the
decrease
the E-AGCH
average
of scheduled
number. number
The E-AGCH
users
of could
each E-AGCH
is
number
be decreased
if
larger
than
or
equal
to
the
the result of HSUPA
threshold.
scheduled user number which
Configuration
The
take the cell asRule:
the serving
speed
that the
HSUPA
cell
divided
by the
current Escheduled
user minus
number
AGCH
number
1 s less
Function:
This
parameter
increased
within
than
or
equal
to
the
threshold.
indicates
the cell maximum
HsupaCtrChUptPrd
Configuration
Rule:
The
number
of
the
EFunction:
This
parameter
Adjustment
Suggestion:
In
range
that
HSUPA
scheduled
RGCH/HICH.The
E- HSUPA
indicates
the
threshold
to
busy
hours:
The
more
user number violated
within
RGCH/HICH
number
could
decrease
E-RGCH/HICH
scheduledthe
user
increased
HsupaCtrChUptPrd.
be
increased
if
the
average
umber.
The Suggestion:
E-RGCH/HICH
within
HsupaCtrChUptPrd,
Adjustment
The
number
of
users
of
each
E- if
number
could
bethat
decreased
the
larger
the
value
is.
The
larger
the
range
HSUPA
RGCH/HICH
is
larger
than
or
the
result
ofuser
total
HSUPA user
less
HSUPA
scheduleduser
scheduled
number
equal
to
the
threshold.
number
divided
increased
withinby the current
violated
within
Configuration
Rule:
The
E-RGCH/HICH
number
minus
HsupaCtrChUptPrd,
the
HsupaCtrChUptPrd,
theuser
speed
that
the
HSUPA
1
is
less
than
or
equal
to
the
smaller
the
value
is
larger
the
difference
between
number
increased
within
threshold.
Parameter
Function:
the
parameter
and This
HsupaCtrChUptPrd
Configuration
Rule:smaller
The
parameter
indicates
whether
EagchUpThr.
The
Adjustment
Suggestion:
Inthe
range
that
HSUPA
user
to
judge
the
priority
of
HSDPA
range
that
HSUPA
scheduled
busy
hours:
The within
more HSUPA
number
violated
and
services
in code
user
number
violated
within
userR99
increased
within
HsupaCtrChUptPrd.
resource
allocation.
HsupaCtrChUptPrd,
the
HsupaCtrChUptPrd,
the
Adjustment
Suggestion:
The
Configuration
Rule:
If this
smaller
thevalue
difference
larger
the
is.
The
less
larger
the
range
that
HSUPA
parameter
is parameter
set to
between
the
and
HSUPA
user
increased
within
user
number
violated
within
"Supported"
and
the
number
EagchUpThr.
HsupaCtrChUptPrd,
the
HsupaCtrChUptPrd,
thesmaller
of
HS-PDSCH
code
smaller
thedifference
value
is is
larger
the
than the threshold forbetween
code
the
parameter
and
fairness,
HSDPA
service is
ErgHichUpThr.
The smaller
given the high priority
to use
the
range
that
HSUPA
user
the
code
resource
compared
This
parameter
indicates
number
violated
within
with
R99
service.
MBMS
Configuration
In A Cell
HsupaCtrChUptPrd,
the
Configuration
Suggestion:
It's
Object
ID.
Itdifference
should
be unique
smaller
the
set
to
"Supported"
if
the
Function:
Additional
offset in
under
thethe
parent
object
between
parameter
and
operator
that HSDPA
R
criteriarequires
of cell
reselection
UUtranCellFDD.
ErgHichUpThr.
service shouldRule:
havecell
higher
Configuration
throughput. difficult level
reselection
If the parameter is bigger, the
relsection
to MBSM
celloffset
is
Function: HCS
priority
triggered easily.
Configuration
Rule: ue
Adjustment
Suggestion: In
mobility speed
general,
this
parameter
willthe
If the parameter
is bigger,
not
be
adjusted.
priority is smaller, ue will
relection
to lower
priority cells
The
function
of this
Function:
of MBMS This
inThis
lowparameter
mobility
state.
parameter:
parameter
indicates
SF32 In
Adjustment
indicates reserved
theSuggestion:
maximum
codes
for users
the MBMS
general,
this
parameter
will
numbernumber
of
MBMS
in the
services
The
function
this
not be
adjusted.
cell.
It will
be of
guaranteed
by
Configuration
Rule:
parameter:
This
parameter
admission control
This
parameter
should be set
indicates
the maximum
mechanism.
according
to
the
planned
throughput
for
MBMS
in
The involved factor
fortraffic
setting
MBMS
services
number
and
a
cell,
which
is
used
for
this parameter: the MBMS
data
rate.
MBMS
CAC.
capacity
of the cell; the
The
involved
factor for
MBMS
performance
of setting
the
this
cell parameter: throughput for
MBMS
traffic
in aparameter:
cell.
Influence
of this
Influence
of
this
parameter:
The larger of the value, the
The
of users
this parameter,
morelarger
MBMS
can
the
larger
access
to the
the MBMS
cell; thecapacity
smaller
of
the
cell
and
the
easier
of
the
value,
the
better
Function: Cell Countingof the
overload
of the Qos.
cell.The
MBMS Service
Switch.
smaller
of this
parameter,
Suggestion
forRule:
setting
thisthe
Configuration
The
smaller
the
capacity
of
the
parameter: the configuration
default value
recommended
cell
suggested
to use.P-T-P or
is "1",
it can select
Suggestion
this
P-T-M basedforonsetting
the counting
parameter:
The
larger
of
this
result and make the
parameter, the
larger themore
distribution
of resources
MBMS
rational.capacity of the cell
and the easier overload of the
cell.the default value is
suggested to use.
The default value means that

the E-AGCH number should
be increased when the
current HSUPA scheduled
user number is 90% of the
The
means that
max default
HSUPAvalue
scheduled
the
E-AGCH
number
could
number
that the
current
Ebe
decreased
the
AGCH
numberwhen
can support.
current HSUPA scheduled
user number is 50% of the
max HSUPA scheduled user
The
default
means Ethat
number
thatvalue
the (current
the
E-RGCH/HICH
number
AGCH number - 1) can
should
support.be increased when
the current HSUPA user
number is 90% of the max
HSUPA
number
the that
The
default
valuethat
means
current
E-RGCH/HICH
the E-RGCH/HICH
number
number
support.when the
could becan
decreased
current HSUPA user number
is 50% of the max HSUPA
number that the (current ERGCH/HICH number - 1) can
support.
The switch of function,
default value is off
Take effect after

the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Take effect after
the change is
loaded to the
RNC
Immediately
Basic index
Can't Modify

default value.
When system
information is
changed
UE mobility is taken into

When system
information is
changed
N/A
Take effect after

the change is
loaded to the
RNC
It's a seasoned value
Immediately
It's a seasoned value
Immediately

value is to make the
distribution of resources
more rational.
Immediately
No
No
No
No
No
No
No
No
No
No
No
No
FACH DATA FP in a NodeB.

The parameter of TOAWS is
The
function
of the parameter
faculty
of processing
FACH
is
to in
control
the latest
FPs
a RNC.
acceptable
arrival
time is
of a
The parameter
of jitter
FACH
DATA
FP
about
ptm
MBMS
service
a NodeB.
transport
delay in
jitter
from a
The
is NodeB.
configured
RNCparameter
to a related
according
If the valuetoofthe
theTransmission
parameter
jitter
tolerance
errors
is too small, thetime
quality
of ptm
from
RNC
to
a
related
MBMS service would be
NodeB.
dropped.
If
If the
the value
value of
of the
the parameter
parameter
is
the delay
qualityofofptm
ptm
is too
too small,
large, the
MBMS
MBMS service
service would
would be
be
This
parameter indicates
dropped.
increased.
MBMS
Service
Area
If
the
value
ofparameter
the
parameter
The protocol
Configuration
Object
It
is
too large,
the
delayID.
of ptm
TOAWS
is configured
should
be
unique
under
the
MBMS
service
would be
according
to adjusting
the
parent
. parameter:
increased.
Function
of this
It
value ofobject
the
parameter
of jitter
The
parameter
can not
be
indicates
the RNC's
MBMS
service
because
the
process
configured
too small.
area
code.
faculty
is more
steady.
network layout.
If the MBMS is not used, this
parameter
is invalid
This parameter
indicates
Layer
Configuration
Object It
Function
of this parameter:
ID.
It
should
be
unique
indicates the frequencyunder
band
the
UMbmsSa.
usedparent
by theobject
cells of
preferred
frequency layer in the MBMS
service area.
frequency resource of the
Function
of
Function
of this
this
parameter:
It
operator and
theparameter:
network It
indicates
the
cell
number
of
a
indicates
the
downlink
UTRA
layout.
frequency
layer
in
a
MBMS
absolute
RF
channel
number
service
area
of
the Cells
preferred
parameter
isofcode.
invalid
Factors
of
consideration:
the
range
of
the
service.
Service Area .
This
parameter
is larger, a
parameter
is invalid
Function
this parameter:
preferred of
frequency
layer inita
indicates
the logical
cells of
MBMS service
area code
the
preferred
contain
more layer
cells, more cell
Factors
consideration:
the
will bearof
the
MBMS service.
cells
of
the
preferred
layer
This parameter is smaller, a
the
operator
can uselayer
it to find
preferred
frequency
in a
the
logical
cellsarea
of the
MBMS
service
code
preffered
layer
in less cell will
contain less
cells,
vsDataLogicalCell,
and then
bear the MBMS service.
can
the cell
in the
If thefind
MBMS
is not
used, this
This
parameter
indicates to
UtranCellFDD
according
parameter
is invalid
MBMS
Non Preferredof
the utranCellFDDRef
Frequency
Object ID.ItIt
vsDataLogicalCell.
Function
of Layer
this parameter:
should
be
unique
under band
the
indicates the frequency
parent
object
UMbmsSa.
used by the cells of non
preferred frequency layer in
the MBMS service area.
frequency resource of the
Function
of this
operator and
theparameter:
network It
indicates
the
downlink
UTRA
layout.
absolute
RF
channel
number
of
the Cellsisofinvalid
non preferred
parameter
Service Area.
parameter is invalid

in a RNC.
Immediately

in a related NodeB.
Immediately
Basic index
Can't Modify
N/A
Immediately
Basic index
Can't Modify
N/A
Immediately
N/A
Cann't modify
N/A
Immediately
N/A
Cann't Modify
Basic index
Can't Modify
N/A
Immediately
N/A
Cann't Modify
non preferred frequency layer

in a MBMS service area code.
Factors of consideration: the
range of the service.
No
No
No
No
No
No
No
No
No
Yes
No
No
This
parameter
larger, a it
Function
of this is
parameter:
non preferred
frequency
indicates
the logical
cellslayer
of
in
MBMS
servicelayer
area code
thea non
preferred
contain
cells, more cell
Factors more
of consideration:
the
will
bear
the
MBMS
service.
cells of the non preferred
This
layerparameter is smaller, a
non
preferredcan
frequency
the operator
use it tolayer
find
in a logical
MBMScells
service
area
code
the
of the
non
contain
cells,
prefferedless
layer
in less cell will
bear
the
MBMS
service.
vsDataLogicalCell,
and then
If
the
MBMS
is
not
used, this
can find the cell in the
The
function
this
parameter
is of
invalid
UtranCellFDD
according
to
Parameter Function:
This
parameter:
MAC-ehs
queue
the utranCellFDDRef
of
parameter
is
the
enhanced
identity
in CELL_FACH state
vsDataLogicalCell.
Cell_FACH
The involvedobject
factorID.
for setting
The
function
of
this parameter: this
MAC-ehs
parameter:
Channel
Type
queue identity
in CELL_FACH
Indicator
for
Downlink
state
Enhanced
Influence ofCELL_FACH
this parameter:
Priority
Queue
MAC-ehs
queue identity in
The
function
this
involved
factor
for setting
CELL_FACH
state,
not
The
function of
of
this it's
parameter:
this
parameter:
Channel
Type
adjustable scheduling priority
parameter:
The
involved
factor
for
setting
for
Downlink
Enhanced
Suggestionforforenhanced
setting this
indication
this
parameter:
CELL_FACH
Priority
parameter:
MAC-ehs
queue
CELL_FACH
queue Queue
Influence
of
this
parameter:
identity
in
CELL_FACH
state,
Suggestion
forIndicator
setting
this
Channel
Type
for
it's not
adjustable
this
parameter:
scheduling
parameter:
Timer
in .which is
Downlink
Enhanced
The
function
of this
priority
indication
for
used
to control
the reset
of
CELL_FACH
Priority
Queue,
parameter:
Re-ordering
enhanced
CELL_FACH
the
MAC-ehs
reordering
and
is
not
adjustable
release
timer
(T1)
for
DL
queue
functionality
in CELL_FACH
Suggestion
for
setting
this
Enhanced
which
Influence ofCELL_FACH
this
parameter:
or
CELL_PCH
.
This
parameter:
set
according
to of
is
used
to
avoid
congestion
scheduling priority indication
parameter
isBuffer.
an
array
the enhanced
queue usage,
and is not
UE
Mac-hs
for
CELL_FACH
corresponding
to array
adjustable
The
involved
for setting
queue,
it's notfactor
adjustable
CHTYPEIND.
this
parameter:
traffic delay
Suggestion
for setting
this
The
larger of
the value,
the
requirement,
SDU
discard
parameter:
scheduling
priority
better
Qos
of
the
traffic
on
DL
rate
The
function
of
this
indication for enhanced
EFACH
and
the
lower
of
cell
Influence
of
this
parameter:
parameter:
MAC-hs
Window
CELL_FACH queue, it's not
capacity
DL
the
largeron
ofand
theEFACH.
value, theSize
(receiveing
sending)
adjustable.
The
function
of this(the
longer
traffic
delay,
and the
for
MAC-hs
queue
The
functionReset
of thisTimer
parameter:
less
SDU
discard
rate;
the
number
of
Mac-hs
PDU)
parameter:
ThisReset
parameter
Controlling
the
of
the
smaller
of
the
value,
the
The involved
factorDiscard
for setting
indicates
whether
MAC-ehs
Reordering
for the
DL
shorter
traffic
delay,
and
this
parameter:
PDU
discard
Timer
is configured
for the
Enhanced
CELL_FACH
which
higher
SDU
discard
rate;
rate
and
traffic
delay.
downlink
Enhanced
is
multiples
T1parameter:
values;
Influence
of of
this
CELL_FACH
queue.
used
to
indicate
the
Reset
the
larger
of the
value,
the of
The
involved
factor
for setting
the
MAC-ehs
Reordering
more
of MAC-hstraffic
PDUdelay;
thatfor
this
parameter:
UE
in
CELL_FACH
or
can capacity
stay
in MAC-hs
The
function
of this queue,
cell
CELL_PCH
state.
the
lower of
PDU
discard
parameter:
Discard
Timer rate
,
Influence
of
this
parameter:
avoid
congestion
of
UE delay;
Macand
the
longer
of
traffic
which
defines the
maximal
This
parameter
indicates
hs
Buffer.
the
smaller
of theTimer
value,
the
time
thatDiscard
MAC-hs
SDU is
can
whether
The
involved
factor
forthat
setting
less
of
MAC-hs
PDU
can
exist
in
DL
Enhanced
configured
for the
downlink
this
parameter:
traffic
delay
stay
in
MAC-hs
queue,
the
CELL_FACHPriority
Queue.
Enhanced
CELL_FACH
requirement,
SDU
rate
The
function
of
thisreset
higher
ofthe
PDU
discard
rate
The
involved
factor
for
setting
queue.if
Discard
Timer
is
Influence
of
this
parameter:
parameter:
This
parameter
and
the
shorter
of
traffic
this
parameter:
trafficindelay
configured,
the
SDU
the
largerthe
of the
value, the
indicates
Maximum
MACdelay.
requirement
downlink
Enhanced
longer
traffic
delay,
andPDU
the
cInfluence
PDU
Size
for
flexible
of
this
parameter:
CELL_FACH
queue
will
be
less
SDU
reset
rate;
the
in
Downlink
The
larger when
ofEnhanced
theitvalue,
the
discarded
exists
the
smaller
of the
value, the in
CELL_FACH.
lower
delay
requirement
from
queue
for
a
time
longer
than
shorter
traffic
delay,
and
the
The
involved
for
setting
traffic,
and
thefactor
longer
time
the
configured
Discard
Timer;
higher
SDU
reset
rate;
this
parameter:
UE
that
in MAC-hs
if theSDU
Discard
Timer isqueue
not
compatibility;
transport
can
exist; The
smaller
configured,
the
default of the
efficiency
of
Downlink
value,
thevalue
higher
maximal
willdelay
be used.
Enhanced
CELL_FACH
requirement
from traffic, and
Influence
this that
parameter:
the shorteroftime
SDU in
This
parameter
is
set
to the
MAC-hs queue can
exist;
maximal MAC-c PDU Size
that all the UE can support on
Downlink Enhanced
CELL_FACH. and is not
N/A
Immediately
N/A
Cann't Modify
N/A
Can't Modify
Queue Identity. It's not a

adjustable parameter
Immediately
channel type, It's not a

adjustable parameter
Immediately
Commercial network proved

value
Immediately

value
Immediately

value
Immediately

value
Immediately

value
Immediately

value
Immediately
the maximal MAC-c PDU

Size that all the UE can
support on Downlink
Enhanced CELL_FACH.
Immediately
No
No
Yes
No
No
No
No
No
No
No
No
No
SCCH
in CELL_FACH
power offset
relative to state,
the
traffic
performance
configured P-CPICHinpower in
CELL_FACH
state, cell
a
cell.
Parameter
Function: This
capacity
The involved
factor for
setting
parameter
whether
Influence
ofindicates
thispower
parameter:
this
parameter:
for
HSthe
IE
"UL
interference
The
larger
of the value, for
the
PDSCH
in
CELL_FACH
state,
common
E-DCH"
is
better
Qos
of the traffic
traffic
performance
in on DL
configured
in
SIB5/5bis.
EFACH
and
the
lower
of cell
CELL_FACH
state,
cell
Configuration
Rule:
It needs
capacity
on
DL
EFACH.The
capacity
to
consider
whether
UL
less
of theofvalue,
thethe
worse
Influence
this
parameter:
interference
can
be
updated
Qos
of the of
traffic
DL the
The
larger
the on
value,
in
time.
EFACH
and
the
larger
ofoncell
better
Qos of the gets
traffic
DL
If
this parameter
the
capacity
on
DL
EFACH.
EFACH
and
the
lower
of
cell
value
0, "ULfor
interference
Suggestion
thisfor
capacity
on
DL setting
EFACH.The
Parameter
Function:
This
common
E-DCH"
is
not
in
parameter:
this parameter
less of the and
value,
the
worseis
parameter
indicates
the
SIB5/5bis,
UE
calculated
a
power
level
relative
to
Qos
of offset
the
traffic
onpower
DL
power
between
thethe
last
the
preamble
initial
isin
configured
P-CPICH
power
EFACH
and
the
larger
of cell
transmitted
preamble
and
the
based
on
the
UL
interference
a
cell.power
a little
value
can be set
capacity
onSIB7.
DL
EFACH.
initial
of
the
DPCCH
read
from
The
in
good
radio
environment
to
Suggestion
this
transmission
in setting
thecan
Enhanced
frequency
offor
SIB7
be
provide
maximal
cell
capacity
Parameter
Function:
This
parameter:
this
parameter
is
Uplink
inthe
CELL_FACH
state.
high,
UL of
interference
in
theso
advance
good
traffic
parameter
indicates
a power
level
relative
to
the
Configuration
Rule:
Itthe
needs
can
be
more
exact.
performance;
large power
value in
Parameter
Function:
This
additional
E-DCH
configured
P-CPICH
to
consider
thea demodulation
If
this
parameter
gets
the
can
be
set
in
bad
radio
parameter
indicates
the
transmission
back
off
inbe
uplink
a
cell.
a
little
value
can
set
quality
and
the
consumed
value
1,
"UL
interference
for
environment
to
provide
good
number
of CELL_FACH
common
E-DCH
enhanced
state.
in
good
radio
environment
to
uplink
power.
common
E-DCH"
isenhanced
in
traffic
performance.
resources
inparameter
uplink
Configuration
Rule:
Time
provide
maximal
cell
capacity
Bigger
this
is,
SIB5/5bis,
and
UE calculated
CELL_FACH
state.
delay
and
demodulation
in
the
advance
of good
traffic
bigger
initial
power
of
DPCCH
the
preamble
initial
power
is
Configuration
Rule:
It value
needs
quality.
performance;
a
large
in
enhanced
CELL_FACH
based
on
the
UL
interference
to
consider
the
number
Bigger
this
parameter
is,of
can
be
setSIB5/5bis.
in
bad
radio
status,
and
higher
read
from
Usually,
common
E-DCH
users
can
more
delay
to
transmit
data
environment
to
provide
goodin
demodulation
quality.
the
information
of
SIB5/5bis
is
transmit
data
at
same
time
CELL_FACH
status,
but
more
traffic
performance;
Parameter
Function:
This
Smaller
this
parameter
is,
larger,
so
it
can
not
be
and
the initial
resource
possible
to indicates
use
a high
suitable
parameter
the
smaller
power
of
updated
with
too
consumption.
power
to
transmit
data,
and
maximum
common
E-DCH
DPCCH
in
enhanced
frequency,
and
UL
Bigger
this
parameter
is,
higher
demodulation
quality.
resource
allocation
CELL_FACH
status,
and
interference
can
nottime.
be
more
common
E-DCH
users
Smaller
this
parameter
is,
Configuration
Rule:
This
lower
demodulation
quality.
updated
in
time.
can
data
at
same
less transmit
delay to
transmit
data in
parameter
should
ensure
time,
but
morestatus,
system
CELL_FACH
there
is enough
time but
to less
resource
be
used.
possible RRC
to usemessage
a suitable
transmit
to
Smaller
parameter
is,
Parameter
Function:
This
power
transmit
data,
and
UTRANtothis
after
UE was
less
common
E-DCHquality.
users
parameter
indicates
the
lower
demodulation
admitted
and
assign
common
can
transmit
datatransmission
same
common
E-DCH
E-DCH
resource.
Itatmainly
time,
buton
less
system
continuation
back
off.of UE.
depend
the
delay
resource
be
used.
Configuration
Rule:
It needs
If this parameter
is too
big,
Parameter
Function:
This the
Configuration
Suggestion:
1
to
consider
the
efficiency
UE transmit data on CCCH
parameter
indicates
the
F-DPCH
can
support
10
resource
be
used
and
the
will occupy the resource long
maximum
for collision
common
users,
so
time
delay
for
time,
andE-DCH
itperiod
willtransmission.
waste
resolution
phase
for
usually
the
common
E-DCH
Bigger
this parametercommon
is,
resource.
E-DCH.
resources
is the the
multiple
of
lower
resource
If this efficiency
parameter
is too
small,
Configuration
Rule:
It
needs
10.
be
used,
but
smaller
delay
Parameter
This for
there wouldFunction:
be not enough
to
ensure
there
is
enough
transmission.
parameter
indicates
time to transmit
RRCwhich
Parameter
Function:
This
time
forinner
collision
be
resolved
Smaller
thisindicates
parameter
is,
uplink
loop
power
message.
parameter
the
TPC
and
using
the resource
with
higher
efficiency
the
resource
control
algorithm
is
used
in
step
size
for
uplink
inner
loop
minimum
time.
be
used,
but
bigger
delay
uplink
enhanced
CELL_FACH
power
control
in uplinkis, for
Bigger
this parameter
transmission.
state.
enhanced
CELL_FACH
state.
more
possibility
for collision
Configuration
Rule:
Radio
Configuration
Rule:
service
be
resolved in collision
condition.
quality,
system
capacity.
resolution
phase
when
For
algorithm
1 inner
loop
If
this
parameter
is 1dB,
the
enhanced
CELL_FACH
users
power
control
is
done
every
transmit
power
will
be
adjust
Parameter
This
is
apply
for
common
E-DCH
time
slot,
soFunction:
it can
more
smoothly.
Theresponse
power
parameter
indicates
the
resource.
to
radio
condition change
will
be decreased
too slowly
assumed
HS-PDSCH
power
rapidly.
to
waste
the power
resource
offset
relative
to
P-CPICH/SFor
algorithm
2
inner
loop
affecting
the system
capacity
CPICH
power
used
for
CQI 5
power
control
is
done
every
and
the
power
will
be
measurement
in
uplink
time
slots, too
it isslowly
suit fortoradio
increased
affect
enhanced
CELL_FACH
state.
condition
change
smoothly.
the
service
quality.
And
if this parameter
2dB,
to
consider
the serviceis quality
the
power
will be
andtransmit
the system
capacity.
adjust
more rapidly.
The
If this parameter
is configured
power
will
be
decreased
too
too big, the service in
lower
to
affect
the
service
enhanced CELL_FACH state
quality
andbig
the
power
might get
CQI,
andwill
getbe
big
increased
higher
to waste
power,
buttoo
it will
reduce
the
the
resource affecting
cell power
capacity.
the
system
capacity.
If this parameter
is configured
too small, it might not satisfy

value
Immediately

value
Immediately
SIB7 can make the UL

interference be updated in
time.
Immediately

Immediately
the demodulation quality and
the consumed uplink power.
the requirement of high
Immediately
quality and low time delay.
the requirement of high
common E-DCH service
quality and appropriate
resource consumption.
The default value can ensure
there is enough time to
transmit RRC message, and
avoid occupy the resource
too long time.
the efficiency the resource be
used and the time delay for
transmission.
parameter ensure there is
enough time for collision be
resolved and using the
resource with minimum time.
For algorithm 1 inner loop
power control is done every
time slot, so it can response
to radio condition change
rapidly.
Immediately
Immediately
Immediately
Immediately
Immediately

system capacity are
default value.
Immediately

system capacity are
default value.
Immediately
No
No
No
No
No
No
No
No
No
No
No
No
maximum bit rate of the

common
E-DCH
userThis
in
Parameter
Function:
uplink
enhanced
CELL_FACH
parameter indicates Initial Fstate. power in uplink
DPCH
Configuration
Rule: It needs
enhanced
CELL_FACH
state.
Parameter
to consider
the
service
quality
The
largestFunction:
value
is aThis
valid
parameter
indicates
the SIR
and theit system
value,
used
to capacity.
indicate
that
target
of
the
common
Bigger
this
parameter
is,
the RNC not need to E-DCH
in
uplink
enhanced
bigger
maximun
data rate of
configure
it in PHYSICAL
CELL_FACH
state.
UE in enhanced
CELL_FACH
SHARED
CHANNEL
Configuration
Rule:system
It needs
state, and smaller
RECONFIGURATION
to
consider
the
service
quality
capacity. and the power
REQUEST,
of
and
the
system
capacity.
Smaller this
parameter
F-DPCH
is decided
by is,
Bigger
parameter
smaller
maximun
data is,
rate of
NodeB.this
higher
power of
the
UE
in
UE in enhanced
CELL_FACH
Configuration
Rule:
It needs
CELL_FACH
state,
it will
state,
and
bigger
system
to
consider
the
system
Function:
This
parameter
Parameter
Function:
This
waste
power.
capacity.
capacity
and
service
quality.
indicates
the
allowed
uplink
parameter
indicates
whether
Smaller
this
parameter
Bigger
this
parameter
is,is,
common
MAC
flow
transport
ACK/NACK
and
CQI
are
lower
power
of
the
UE
in
bigger
initialforpower
of Fbandwidth
the cell.
supported
on
HS-DPCCH
CELL_FACH
state,
it
might
DPCH for common
E-DCHin
Configuration
Rule:
uplink
enhanced
CELL_FACH
not satisfy theand
Qostoo
need.
transmission,
big and
Considering
the user
rate
state.
initial
power
will
affect
the
uplink
CE resource
Configuration
Rule:
Itthe
needs
system
capacity.
But
consumption.
to
consider
the15.1dB
HS-DPCCH
biggest
value
means
The
larger
the
parameter,
information
in
Iub
and
Uu the
the
initial
power
of
F-DPCH
is
higher data
rate
may be
interface
and
NodeB
determined
bythe
NodeB.
The
obtained,
but
larger
the
scheduling.
initial
power of
F-DPCH
CE
resource
will
bemeans
cost. The
"0:
Not
Supported"
determined
by
NodeB
will
be
smaller
the
parameter,
the
ACK/NACK
and CQI are
not
more
accurately.
lower
data on
rateHS-DPCCH
may be
supported
in
Smaller
this
parameter
is, CE
obtained,
but
the
less the
uplink
enhanced
CELL_FACH
smaller
initial
power
of F- the
resource
will be
cost.
This
parameter
indicates
state,
itfor
reduce
the
HSDPCH
common
E-DCH
SCCPCH
Configuration
DPCCH
information
insmall
Iub
transmission,
and tooto
Object
ID belonging
the
and
Uu.
initial
power
affect the
parent
objectwillmeans
"1:
Supported"
service
quality. It should be
vsDataUSccpch.
ACK/NACK
and
CQI are
Function:
This
parameter
unique
under
supported
on
HS-DPCCH
indicates
the
common
Parameter
Function:
This in
vsDataUSccpch.
uplink
enhanced
CELL_FACH
physical
channel
ID of
parameter
indicates
the
state,
NodeB
schedule HSSCCPCH.
maximum
transmission
power
PDSCH
power
based
on
Configuration
Rule:
should
of the FACH which
isIt mapped
ACK/NACK
andthat
CQICommon
will be
be
guaranteed
on
the
SCCPCH.
Function:
ThisRule:
parameter
more accurately.
Physical
Channel
IDItisneeds
unique
Configuration
indicates
thethe
purpose
of of
forconsider
one common
physical
to
coverage
SCCPCH.
channel
within
a cell.
FACH
and
system
capacity.
Configuration
Rule: According
to
theparameter
actual usage
The
valueofisthis
SCCPCH, ittomay
besure
"Used
configured
make
thefor
R99",
"Used
for receive
MCCH"the
and
UE in cell
edge
"Used
for MCCH
and R99".
FACH
with
the parameter
biggest
data
Function:
This
rate
rightly
and
avoid
indicates
the
time offset
Parameter
Function:
This
generating
unnecessary
between SCCPCH
and
parameter
indicates
the
power waste.
PCCPCH.
power
offset of the
SCCPCH
If
the parameter
value
is too
Configuration
Rule:
The
TFCI
domain
relative
to the
small,
the
FACH
channel
parameter
is large or small
data
domain.
coverage
will be so
small that
has
no
influence
to the
Configuration
Rule:
The
Parameter
Function:
This will
the
UE's
receiving
quality
performance.The
only
parameter
value
is
configured
parameter
indicates
the
be
bad
when
it
is
in
the
requirement
that eachedge
based
on theis
on
power
offset
ofrequirement
the
SCCPCH
of the cell.
SCCPCH
should
use
different
coverage
and
capacity
of
pilot
If
thedomain
parameter
value
isthe
too
frame
timing relative
offset
totoavoid
system.
data
domain.
large,
it
will
increase
the
sending
at the same
time
so
If
the parameter
value
is too
Configuration
Rule:
The
interference
unnecessary,
as
to
avoid
high
average
peak
small,
the downlink
SCCPCH
TFCI
parameter
value is configured
waste
the
power
ratio.
domain
power
will
be
so small
based
on
the
requirement
on
and decrease the downlink
that
the
UE's
probability
of
coverage
and
capacity
of
capacity.
right
receive will be bad when
system.
itIf is
in
the edge ofvalue
the cell.
the parameter
is too
If
the
parameter
value
is too
small, the SCCPCH Pilot
large,
it
will
increase
the
domain power will be so small
interference
that
the UE'sunnecessary,
probability of
waste
the downlink
right receive
will be power
bad when
and
decrease
it is in
the edgethe
of downlink
the cell.
capacity.
large, it will increase the
interference unnecessary,

system capacity are
default value.
system capacity are
default value.
The biggest value 15.1dB
means the initial power of FDPCH is determined by
NodeB. The initial power of
F-DPCH determined by
NodeB will be more
accurately.
Considering the user rate
and uplink CE resource
consumption.
Immediately
Immediately
Immediately
Immediately
The value 1 considers the

Node B scheduling firstly.
Immediately
Basic index
Cann't Modify
Different value range are

defined for different common
physical channels. It should Take effect after
be guaranteed that Common the cell is deleted
Physical Channel ID is
and setup again
unique for one common
physical channel within a cell.
usage of this SCCPCH

considered the coverage of
FACH
and system
capacity.
The parameter
is large
or
small has no influence to the
performance.The only
requirement is that each
SCCPCH should use
different frame timing offset
to avoid sending at the same
time so as to avoid high
The
default
value
has
average
peak
ratio.
SCCPCH and system
capacity.
SCCPCH and system
capacity.
Immediately at
commit.
Immediately
Immediately at
commit.
Take effect after

the S-CCPCH is
deleted and setup
again.
Take effect after
the S-CCPCH is
deleted and setup
again.
No
No
No
No
No
No
No
No
No
No
No
No

PRACH Configuration Object
ID. It should be unique under
Function:
Physical
the parentCommon
object UAich.
Channel Identity.
Configuration Rule: CPCId of
different common physical
channels of the same cell
should be different.
Adjustment
Suggestion:
This parameter
indicates the
CPCId
of
different
common
Function:
This
paramenters ofparameter
Prach
is used
physical
channels
of
the Eindicates
the
transmission
for R99 Prach or common
sameinterval
cell should
different.
time
thebe
DCH,
and
is of
used
toRACH.
index the
Configuration
information of Rule:
RandomConsidering
used
spreadingEaccess in R99
an Common
factor
and
demodulation
DCH
performance.
When 20ms TTI is used by
PRACH, its spreading factor
increased by 2 times
Function:
parameters
comparedThis
to when
10ms TTI
indicate
available
is used. the
20ms
TTI has better
signatures.
demodulation performance,
Configuration
Rule:
better quality, more
The
more
the
signatures
are,
advantageous
for available
Function:
Indicate
the
less
probablity
that
two
demodulationfor
byeach
NodeB.
subchannels
PRACH
preambles
willRule:
be collided.
Configuration
The
subchannel of different
PRACH
should
set
Functions:
This be
parameter
according
to
the
user
indicates the preamblenumber
and
priority code
of theindex.
ASCs
scrambling
mapped
to
the
PRACH.
Configuration Rule:
The 16 PRACH preamble
scrambling code are
determined by the Primay
Scrabling
Codeparameter
of the cell.
Function:
This
Function:
AsigStIdx
Each
PRACH
will
beandof
configures
the
number
AsigEndIdx
indicate
thecode
allocated
a scrambling
ASC for index
the
PRACH
starting
and end index
in
these
16
codes.
Configuration
Rule:
of the signature
for each ASC
The
larger
the
valueThe
is, the
Configuration Rule:
more
ASC
can
be
defined.
signature
number ofand
different
Function:
AsigStIdx
MAX_ASC=8
ASC
should
be
set
according
AsigEndIdx indicate the
to the ASC
priority
and index
user
starting
index
and end
number.
of the signature for each ASC
The
larger theRule:
signature
Configuration
The
range
is,
the
more
signatures
signature number of
different
are
forset
a certain
ASCavailable
should be
according
ASC.
to the ASC priority and user
The
smaller the signature
number.
range
is, the
signatures
The larger
theless
signature
Function:
This
parameter
are
available
for
a
certain
Function:
Indicate
available
range is, the
moreof
signatures
indicates
number
ASC
ASC.
subchannels
for
each
are available
for a certain
which
is configured
theASC
Configuration
Rule: The
ASC.
Persistence
Scaling
Factor in
subchannel
of
different
ASC
The
smaller
the
signature
PSF[MAX_ASC_PSF].
should
be
set
according
to
range
is,
the
less
signatures
Configuration Rule:
the
priority
and
user
are ASC
available
forshould
a certain
This
parameter
be set
number.
ASC.
according
to the requirement
to differentiate the priority of
AC0-AC9, AC10, AC11,
AC12, AC13, AC14 and
AC15. And the number
should be the number of
priorities among these Access
Classes.
more ASC are configured
different Persistence Scaling
Basic index
Can't Modify
N/A
Cann't Modify
configure two Prach

parameters to R99 Prach and Immediately
Common E-DCH
Considering used spreading

factor and demodulation
performance.
Immediately at
Take
effect after
commit.
the Common
Transport
Channel
There is only one PRACH
Reconfiguration
defautly so all the signatures
for R99 PRACH
are available to reduce the
or physical
collision probability.
shared
For R99channel
PRACH,
reconfiguration
Take effect afterfor
common
E-DCH
the Common
PRACH
defautly so all the
Transport
subchannels are available.
Channel
is after
Take effect
deleted
and
PRACH is deleted
setup.
and setup again
for R99 PRACH
defautly so the first
or physical
scrambling code is allocated. shared channel
reconfiguration for
common E-DCH
3 is enough to differentiate
Take
effect
PRACH
. after
the priority of different AC
the change is
and will not waste too much loaded to the
bit in the SIBs.
RNC
Usually, it is not necessary to
differentiate the priority of
Take effect after
AC11-AC15 with AC0-AC9.
the system
AC10 is used for emergency
information is
call, so it is usually mapped
updated
to
ASC0 itwhich
of the
Usually,
is notisnecessary
to
highest
priority.
differentiate
the priority of
Take effect after
the system
information is
updated
to
ASC0 itwhich
of the
Usually,
is notisnecessary
to
highest
priority.
differentiate
the priority of
Take effect after
the system
information is
updated
to
ASC0 itwhich
of the
Usually,
is notisnecessary
to
highest
priority.
differentiate
the priority of
Take effect after
the change is
loaded to the
RNC
to ASC0 which is of the
highest priority.
No
No
No
No
No
No
No
No
No
No
No
No

used by the MAC layer to
calculate the transmission
possibility for the access
service class
ASC is
Function:
Thiswhose
parameter
Function:
Indicate
the
not
less than
2. Where
indicates
the
initial
dynamic
mapping
between
AC and
MAX_ASC_PSF
persistence
level =6.
used
by the
ASC
Configuration
Rule: Thethe
MAC
layer to calculate
Configuration
Rule:
Different
larger the value
is, the
larger
transmission
possibility
for the
Ac
is
mapping
to
different
probability the UE can tranmit
ASCi>=1.
ASC
according
to the
priority
the PRACH
preamble.
Configuration
Rule:
The
configuration.
According
parameter should be set to
the specifications,
AC0-AC9
according
to the traffic
load of
are
mapping to the same
the cell.
ASC
and AC10-AC15
can be
The smaller
the parameter
is,
mapping
to
different
ASCs
the more UE could transmit
respectively.
the PRACH preamble at the
Parameter
Function:
This
same time.
Function:
The
parameter
Function:
The
parameter
parameter
is
the
correction
The
larger
the
parameter
defines
to is,
defines the
the threshold
max random
value
when
calculating
the the
the
less
UE
could
transmit
detect
PRACHrepetition
preamble.
accessthe
procedure
initial
transmission
power
of
PRACH
preamble
at
the
Configuration
Rule:
If
the
time of MAC layer.
PRACH
preamble.
same
time.
parameter
value
is
too
large,
Configuration
Rule:
It needs
Adjustment
Suggestion:
The
the
larger
will
larger
the access
value
is,power
the
more
to
consider
the
system
higher
the MAC
cell
traffic
load
is, to
be
required
and
it is difficult
times
that
could
try the
demand
on
the
timeliness
the
larger
the
parameter
access
to
utran;
random
access
procedure.of
accessing
system
and
cell
should
be set,
and
lessis
UE
If the parameter
value
too
capacity.
The
receive
power
could
sent
the
preamlbe
atto
small,
it
is
easy
to
access
Parameter Function: PRACH
of
receiver
sameantenna
time.
thesingle
utran
but
the receiving
Preamble
Power
Ramp
Step.
should
bebad.
twice
as the
quality is
Configuration
Rule:
It needs
receive
power
dual
CellRadiusScene
Cell Radius
to
consider
theofsystem
antenna
receiver.
0 [0~5]km
demand
on the timeliness of
Adjustment
Suggestion:
1
[5~10]kmsystem
accessing
and cell
If
the
parameter
value is too
2
[10~40]km
capacity.
big,
initial PRACH
3 [40~140]km
If
thethe
parameter
value is too
transmission
might be
4 [140~200]km
big,
the initial power
PRACH
too
big,
it
would
generate
5
[200~ Infinity]km
transmission
powerthe
might be
Function:
Indicate
unnecessary
power
waste
too
big,
it
would
generate
maximum
number
that the
and
affect
the
cell
capacity,
unnecessary
powercan
waste
PRACH
preamble
be
but
access
process
would
andthe
affect
the
cell
capacity,
sent
before
L1
receives
ACK
be short.
but
the
access
process
would
or
NACK.
If
the
parameter
value is too
be
short.
Function:
ThisRule:
parameter
Configuration
It should
small,
the
initial
PRACH
If
the
parameter
value
iscell
too
indicates
the common
be
set
according
to
the
transmission
power
would
be
small,
the
initial
PRACH
transport
channel
ID
of
coverage,
power ramp
step
more
reasonable,
but
it
would
transmission
power
RACH.
Common
transport
and
max
PRACH
Txwould
power.be
have
more
preambles
morelarger
reasonable,
butis,itfor
would
channel
ID the
is the
unique
The
value
the
power
ramp,
it would
make
have
more
preambles
for
identifier
allocated
topreamble
one
larger
probablity
the
the
access
process
longer.
power
ramp,
it would
make
common
transport
channel
being acknowledged
is
and
the
access
process
longer.
within
a
cell
One
cell
contains
also the larger the uplink
only
one BCH.
interference
is.
be
guaranteed
Common
This
parameterthat
indicates
Transport
Channel
ID
is
AICH Configuration Object
ID.
unique
forbeone
common
It should
unique
under the
transport
channel
within
Function:
Common
Physical
UTRAN Cell
Object
ID ofa
cell.
Channel
Identity.
parent object.
Configuration
CPCIdisof
Function: ThisRule:
parameter
different
common
physical
used to calculate the timing
channels
of between
the samePRACH
cell
relationship
should
be
different.
preambles, between the
Adjustment
Suggestion:
PRACH
preamble
and
CPCId
different common
PRACHofmessage,
between
physical
thethe
AICH andchannels
PRACH of
and
same
cell
should
be
different.
available access slot of each
ASC.
be set according to the cell
radius.
Adjustment Suggestion: It
should be set to 1 if the cell
radius is larger than 120KM.

to
ASC0 itwhich
of the
Usually,
is notisnecessary
to
highest
priority.
to ASC0 which is of the
highest priority.
restrict the UE transmitting
PRACH preamble.
Take effect after

the system
information is
updated
Take effect after
the system
information is
updated
Take effect after
the system
information is
updated
In order to reduce the RACH

delay and increase the
RACH access possibility, the
value is set to 6.
It is the field test results that
can satisfy the RACH
message part demodulation
requirement and UE Tx
The
default
value
of thisto too
power
will not
increase
parameter
considered
much high has
value.
the system demand on the
timeliness of accessing
system and cell capacity. The
default value is configured for
dual antenna receiver, and
for
antenna,
Thesingle
default
value of3dB
this
needs
to
be
added.
parameter has
considered
the system demand on the
timeliness of accessing
system and cell capacity.
40 times enable UE increase
the PRACH preamble power
as much as possible and will
not increase the access
delay too much.
It should be guaranteed that
Common Transport Channel
ID is unique for one common
transport channel within a
cell.
Take effect after

the system
information is
Take
effect after
updated
PRACH is deleted
and setup again
for R99 PRACH
and physical
shared channel
reconfiguration for
common E-DCH
PRACH .
At next use
Basic index
Can't Modify
N/A
Cann't Modify
Usually, the cell radius is

smaller than 120Km.
Take effect after

AICH is deleted
and setup again.
Take effect after

the system
information is
updated
Take effect after
the system
information is
updated
Take effect after
the S-CCPCH is
deleted and setup
again.
No
No
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes

MICH Configuration Object
ID.
It should
be unique
under
Function
of this
parameter:
It
the
parent
object
indicates the common
UUtranCellFDD.
Function:
This parameter
physical channel
ID of MICH
indicates
the
number
in order to identity
theof NI
(Notification
Indicators)
that
different physical channel.
one
MICH
radio
frame
It
should
be
guaranteed
that
Parameter Function: MBMS
contains.
Common
Physical Channel
ID
related
parameter.
This
Configuration
Rule:
is unique for
one
common
parameter
indicates
the
Considering
the
capacity
physical channel
within
a cell.
transmission
power
of MICH.
requirement
of
the
If the MBMS isRule:
not MICH
used,
Configuration
The this
notification
downlink
isand
invalid
parameter value
is configured
power
resource.
to ensure the UE in cell edge
Parameter
Function:
This
The receive
larger NI,
lower
the
can
thethe
MICH
rightly
parameter
indicates
the
repetition
of
each
NI,
and avoid generating and the
maximum
number
ofpower.
services
higher
power
is needed.
So in
unnecessary
waste
whose
rates
will
be
order
to
save
power
this
If
the parameter
valueSwitch
is too
Parameter
Function:
decreased
each coverage
time
when
parameter
should
be set
towill
small,
the
MICH
for
shielding
GBR
reduction
congestion
takes
place.
the
minimum
values
which
be
so smalluplink
that the
UE's
shared
andFor
Configuration
Rule:
satisfiesbythe
notification
probability
of
right
receive
will
downlink.
overload
controlthe
or UE in the
requirement.
be
small
when
Configuration
Rule: This
congestion
control,
edge
of theneeds
cell. to consider
parameter
dlMaxDecStg
is associate
Parameter
This
Basic
indexFunction:
If
the
parameter
value
is too
the
requirement
of
load
with
maxNumUeOfDecRat,
parameter
indicates
the
large,
it
will
increase
the
reduce
affect
the
service
they
areand
used
to control
the
maximum
number
of selected
interference
unnecessary,
quality
as
little
as
possible
at
rate
of
rate
reduction.
The
services
guaranteed
waste
thewhose
downlink
power
therates
same
time
when
overload
value
of
this
parameter
bit
will
be
decreased
and
decrease the downlink
happen.
should
make
theoverload
load be
each
time
when
capacity.
Turn
on the
function
GBR
reduced
as quick
as of
possible
happens.
decrease,
it
might
make
the
and make the Rule:
minimum
Configuration
The value
online
GBR
services
impact
to
the
online
services
of this parameter can make
decrease
GBR
and affect
when
downlink
overload
orthe
the system
equipment
run
in
performance,
butquick
it can
congestion
normal
statehappen.
as
as
reduce
the
cell
load
and
If the parameter
value
isleast
too
possible
and
make
the
reduce
the
probability
of call
large, itto
would
cost short
time
impact
the online
services
drop.
Parameter
Function:
to reduce
the
to This
normal
when
uplink
orload
downlink
Parameter
Function:
This
Turn
off
function
ofwhich
GBR
parameter
the
state,
butthe
itindicates
reduce
overload
happen.
parameter
iswould
a switch
decrease,
after
"rate
switch
of
rate
downgrade
overmuch
load
unnecessarily,
The largerwhether
the parameter
is,
indicates
a
decrease",
"forced
ahead
of preemption.
and
it affect
service
quality.
the
more
UEs
are
congested
user
canhandover"
trigger
and
I/B
services
Configuration
theisonline
If the"forced
parameter
value
too
renegotiated
toRule:
the
forced
handover
of lowest
the
Parameter
Function:
Thisand
transfer
to
cell_fach
state"
of
preempted
user
number
small, and
it would
cost
long
time
GBR,
the
more
resource
users
in
the
cell.
parameter
isaccess.
a switch
which
overload
control,
the
"call
the
delay
of
to released
reduce the
toItnormal
is
in load
this
cell,
the
Configuration
Rule:
needs
indicates
whether
aset
drop"
is
the
only
method
to
If
this
parameter
is
torate
On,
state.
more
quickly
the
cell
load
to
consider
whether
the
congested
user
can
trigger
reduce
the
load,
it
would
the
rate
downgrade
will
be
returns
to
normal.
But
if
the
of
success
call setup
ofonline
high
forced
call
drop
ofdrop
theThis
increase
the
call
rate.
Parameter
Function:
executed
ahead
value
too
big,
would
priorityis
users
anditof
affect
the
users
in
the
cell.
Note:
This
parameter
is
parameter
iswhen
a as
switch
which
preemption
congestion
select
too
many
UEs
to
service
quality
few
asvalid
Configuration
Rule:
It
needs
only
when
QoS
renegotiation
indicates
whether
is
occured.
In
this
way,
the
downgrade
rate,
it a
would
have
possible
at
the
same
time.
to
consider
whether
the
rate
function
is
turned
on
which
congested
user
can
trigger
pre-empted
service
number
serious
impact
to
the
online
Turn
on
the
function,
when
of
success
call
setup ofcontrol
high
means
qosNegRenegSw
forced
RAB
transferring
tois 1
caused
by congestion
services.
pre-emption
should
be
done,
priority
users
should
be
or
3.
FACH
of
the
online
I/B
users
will
be
decreased
with
the
The
smaller
the
parameter
is,
forced
handover
can be
protected
with
priority.
in
the
cell.
guaranteed
admission
the
less
UEs
are
renegotiated
triggered.
It protects
the rate
Turn
on the
function,
Configuration
Rule:
It when
needs
success
rate,
but
the
access
to
the
lowest
GBR,
and
the
of
success
call
setup
of
high
congestion
happened,
and
to
consider
whether
the
rate
delay
will
be
increased.
less
resource
is
released
in to
priority
users,
but
it
will
forced
handover
or transfer
of
success
call
setup
of
high
this
cell,
the
more
slowly
the
increase
the
load
of
the
CELL_FACH
is failed,
it the
can
priority
users
and
affect
cell
load
returns
to
normal.
neighboring
cell,
and
iftothe
force
low
priority
user
service
quality
as few
as drop,
handover
fail,resource
the
call for
would
and release
high
possible
at
the
same
time.
drop. user, the rate of
priority
Turn
on
the
function,
when
Turn
off the
when
success
callfunction,
setup ofbe
high
pre-emption
should
done
pre-emption
should
be
done,
priority
users
could
be
and
forced
handover
can
not
only
transfer
to
CELL_FACH
protected.
be
triggered,
forced
online
I/B
or
calloffdrop
be triggered,
Turn
the can
function,
when
service
transferring
to
ifcongestion
only call drop
can be and
done,
happened,
CELL_FACH
can will
be done.
It
the callhandover
drop rate
be rise.
forced
or
transfer
protects the rate of success to
CELL_FACH
is failed,
there is
call setup of high
priority
no
way
to
release
resource
users, but it would affect the
for
high quality,
priority and
user,it the
rate
service
might
of
success
call
setup
of
high
cause RACH or FACH
priority users would be
Basic index
Can't Modify
make sure Common Physical

Channel ID is unique for one
Cann't modify
common physical channel
within a cell
Considering the capacity
requirement of the MICH
notification and downlink
power resource.
Immediately at
commit.

parameter can ensure the UE
in cell edge receive the MICH Immediately
rightly and avoid generating
unnecessary waste power.
Basic index
requirement of reducing the
load rapidly, and the impact
to online service is the
minimum.
Now Qos renegotiation
function is turned off, so this
parameter is invalid. Turn off
the GBR decrease function
consider the GBR service
quality.
minimum.
The access delay of high
priority users is first
considered.
Forcing handover can
increase the load of the
neighboring cell, and if the
handover fail, the call would
drop. So the default value of
this parameter is turn off the
forcing handover function.
Protect the rate of success
call setup of high priority
users with priority.
Because the rate of
FACH/RACH channel is low,
if release CELL_DCH
resource by transfer service
to cell_fach state, it would
make FACH/RACH channel
congestion, so this function is
turned off.
Cann't Modify
Immediately
Immediately
At next judgment
(i.e., shall not
affect ongoing
connections)
Take effect for the

next call
Immediately
Immediately
Immediately
No
No
No
Yes
Yes
Yes
No
No
No
No
No
No

to
ensure decease
load
Parameter
Function:
This
immediately
when
cell
parameter indicates theuplink
load
is high
threshold
of to
theensure
uplinkthe
system
and do best
commonstability
overload.
effort
to reduce
the call
Configuration
Rule:
Thedrop
caused
by
overload
control.
If
the
parameter
value
to ensure decease loadis too
large,
it would
be hard
to
Parameter
Function:
immediately
when
cellThis
uplink
Parameter
Function:
Uplink
trigger
decreasing
the
uplink
parameter
indicates
the
load
is
high
to
ensure
the
switch for shielding rate
load
immediately
when
the
threshold
for releasing
system
stability
and
do form
best
reduction.
load
of
system
is
uplink
uplink
overload.
effort to
ensure
stable
service
Configuration
Rule:
This
serious
and
it would
Configuration
Rule:
The
quality. overload,
parameter
needs
to
consider
affect
the system
stability.
parameter
is configured
If the
parameter
value
too
the
requirement
of
loadis to
If
the
parameter
value
is too
avoid
the
ping-pong
between
large,
it
will
be
hard
to
trigger
reduce
and
affect
the
service
Parameter
Function:
Uplink
small,
itas
would
be
easy
to at
overload
state
and
normal
decreasing
theas
uplink
load
quality
few
possible
Switch
for
Shielding
Forced
trigger
decreasing
the
uplink
state,
and
it
also
should
do
immediately
when
the
uplink
the same time when overload
Handover
load,
and
forcing
call
drop
is
best
effort
to ensure
service
load
of
system
is
very
high,
happen.
Configuration
Rule:
This
the
only
method
of
serious
quality.
and
iton
might
affectto
the
Turn
theneeds
function
ofsystem
rate
parameter
consider
overload
control,
it would
If
the parameter
value
is too
stability.
reduction,
rate
reduction
is
Parameter
Function:
Uplink
the
requirement
load
increase
the
call
drop
rate.
large,
itfor
is
easy
toof
leave
the
If
the
parameter
value
is
too
the
first
step
when
overload
switch
shielding
forced
reduce
and
affect
overload
andthe
theservice
small,
itas
will
beas
too
easy
toat
happen,
itstate,
can
reduce
the
drop.
quality
few
possible
overload
state
will
be
trigger
decreasing
the
uplink
loadsame
effectively,
and This
the
Configuration
the
timeRule:
when
overload
occurred
easily.
load,
and
itneeds
will affect
theis the
impact
to again
online
service
parameter
to consider
happen.
If
the
parameter
value
is too
service
quality.
minimum.
the
requirement
of
load
Turn
on
thehard
function
of forced
small,
it
is
to
leave
the
Turn
offand
thewhen
function
ofservice
rate
reduce
affect
theoverload
handover,
cell
overload
state,
and
the
reduction,
other
toat
quality
asif few
asmethod
possible
happen,
it can
not
choose
service
quality
will
be
reduce
load
would
be
done
the
same
time
when
overload
Ues
to decrease data rate,
affected.
Parameter
Function:
This
when
overload
happen,
and to
happen.
forcing
some
Ues
handover
Parameter
Function:
This
parameter
indicates
the
the
impact
to
online
service
Turn
on the function
of forced
the
neighboring
cell with
theis
parameter
indicates
the
maximum
number
of
DRBC
big.
call
drop,
when
cell
overload
same
coverage
canofreduce
maximum
selected
steps
ofload
decreasing
rate
Adjustment
happen,
if number
it Suggestion:
can
not data
choose
the
cell
rapidly,
but
itRate
will
UEs
which
are
forced
to
be
for
the
selected
service
each
reduction
is
the
basic
method
Ues
to
decrease
data
rate,
increase
the
load
of
the
handed
over
each
time
when
time
when
uplink
overload
to decrease
the
load
of
the
forced
handover
or
other
neighboring
cell,
and
if the
uplink
overload
happens.
happens.
overload
control,
this
method
methods
to
reduce
thewould
load,
handover
fail,
the
call
Configuration
Rule:
The
value
Configuration
Rule:
The
value
can
decrease
the
with
the
forced
drop
is load
the
final
drop.
of
this
parameter
shuld
make
of
this
parameter
should
minimum
effect
to
the
online
Parameter
Function:
This
method
to
ensure
the
cell
Turn
off return
the function
of forced
the
cell
to
normal
make
theSo
load
bereduction
reduced
service.
rate
parameter
indicates
the
load
can
be
reduced,
butstate
itisas
handover,
when
cell
overload
as
quick
as
possible
and
quick
as
possible
and
make
necessarily.
maximum
number
of
selected
would
increase
the
call
drop
happen,
it can notimpact
chooseto
make
theifminimum
the
minimum
toto
the
UEs
which
areimpact
forced
be it
rate.
Ues
to
decrease
data
rate,
the
online
services
when
online
services.
dropped
each
time
when
Turn
off force
the function
of forced
can
not
Ue
handover,
overload
happen.
If
thedrop,
parameter
value
is tooto
uplink
overload
happens.
call
when
cell
overload
and
only
use
other
Parameter
Function:
This
The
larger
value
themethod
large,
it
would
cost
short
time
Configuration
Rule:
The
happen,
if
it
can
not
choose
reduce
the indicates
load.
parameter
the value
parameter
is
configured,
the
to
reduce
the
load
to
normal
of
this
parameter
can
make
Ues
to
decrease
data
rate,
threshold
of
thehandover
downlinkto
more
UEs
are
state,
but
it
would
reduce
the
system
equipment
run in
forced
handover
or other
serious
overload.
other
cells,
and
more
overmuch
unnecessarily,
normal
state
as
quick
as
methods
toload
reduce
the
load,
Configuration
Rule:
The
resource
is released
intothis
and
affect
service
quality.
possible
and
make
the
thereit is
none
method
parameter
value
is
configured
cell,
the
rapider
the
cell
load
If
the
parameter
value
isonline
too
minimum
impact
to load
the
reduce
the
cell load,
and
it
to
ensure
decease
return
to
normal
state.
But
if
small,
it
would
cost
long
time
services
when
downlink
affect
the
cell
stability.
immediately
when
cell
the
value
of
the
parameter
is
to
reducehappen.
the
load
to This
normal
overload
Parameter
Function:
downlink
load
is select
high
totoo
too
big,
it
would
state.
The
larger
thestability
parameter
indicates
the
ensure
the value
system
many
UEs
to
handover,
itthe
parameter
configured,
threshold
ofis
the
downlink
and
do
best
effort
to
reduce
would
have
serious
impact
to
more
resource
is
released,
common
overload.
the
call
drop
caused by
the
online
services.
the
rapider
the
load
to
be
Configuration
Rule: The
overload
control.
The
smaller
value
reduced.
But
if the
value
of
parameter
value
isthe
configured
If
the
parameter
value
is too
parameter
is
configured,
the
the
parameter
is
too
big,
it
to
make
sure
decease
load
large,
it would
be hardThis
to
Parameter
Function:
less
UEs
are
handover
to to
would
select
too
many
UEs
immediately
when
cell
trigger
decreasing
the
parameter
indicates
the
other
cells,
and
the
less
drop,
it would
have
serious
downlink
load
is
high
to
downlink
load
immediately
threshold
forreleased
releasing
resource
is
in from
this
impact
to
the
online
services.
ensure
the
system
stability
when
the
load
of
system
is
downlink
overload.
cell,
thebest
slower
theto
cell
load
The
smaller
value
the
and
do
effort
ensure
serious
overload,
and
it
would
Configuration
Rule:
The
return
to
normal
state. the
parameter
is
stable
service
quality.
affect the
system
stability.
parameter
is configured,
configured
to
less
is released,
the
If
parameter
value
is
If the
theresource
parameter
value
is too
too
avoid
the ping-pong
between
slower
the
load
to
be
large,
it
will
be
hard
to
trigger
small, it would
to
overload
state be
andeasy
normal
reduced.
decreasing
load
trigger
decreasing
the do
state, and
itthe
alsodownlink
should
immediately
loadcall
of
downlink
andthe
forcing
best
effortload,
to when
ensure
service
system
is very
andof
it will
drop is the
onlyhigh,
method
quality.
affect
the
systemvalue
stability.
serious
overload
control,
it
If
the parameter
is too
If
the
parameter
value
too
would itincrease
theleave
callisdrop
large,
is easy to
the
small,
be too
rate. it will
overload
state,
andeasy
the to
trigger
decreasing
the
overload state will be
downlink load,
it will
occurred
againand
easily.
affect
the servicevalue
quality.
If the parameter
is too
small, it is hard to leave the
overload state, and the

system stability and avoid call
drop caused by overload
control.
system stability and do best
effort to ensure stable service
quality.
ping-pong between overload
state and normal state, and it
also consider the service
quality.
Rate reduction of overload
control can reduce the load
effectively, and the impact to
online service is the
minimum,
so it is necessarily.
Forcing handover
can
handover fail, the call would
load rapidly.
minimum.
load rapidly.
load rapidly.
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately

system stability and do best Immediately
effort to reduce the call drop
caused by overload control.
system stability and do best Immediately
quality.
Immediately
quality.
Yes
Yes
Yes
No
No
No
Yes
No
No
Yes
No
No
Downlink switch for shielding

the same
time when overload
forced
handover.
happen.
Turn
on theneeds
function
of rate
parameter
to consider
reduction,
rate
reduction
Parameter
Function:
the requirement of load is
the
first and
step
when
overload
Downlink
switch
for
shielding
reduce
affect
the
service
happen,
it
can
reduce
the at
forced
drop.
quality as few as possible
loadsame
effectively,
and This
the
Configuration
the
timeRule:
when
overload
impact
is the
parameter
needsservice
to consider
happen.to online
Parameter
Function:
This
minimum.
the
requirement
of
load
Turn on the function of forced
parameter
indicates
Turn
offand
thewhen
function
ofservice
rate
reduce
affect
thethe
handover,
cell
overload
maximum
number
of
DRBC
reduction,
other
method
toat
quality
as
few
as
possible
happen, if it can not choose
steps
of
decreasing
data
rate
reduce
load
would
be
done
the
same
time
when
overload
Ues to decrease data rate,
for
the
selected
service
each
when overload
happen,
and to
happen.
Parameter
Function:
This
forcing
some
Ues
handover
time
when
overload
the
tofunction
online
service
Turn
on thedownlink
of forced
parameter
indicates
the
the impact
neighboring
cell with
theis
happens.
big.
call
drop,
when
cell
overload
maximum
number
selected
same coverage
canofreduce
Configuration
Rule:
For
Adjustment
Suggestion:
happen,
if it to
can
choose
UEs
forced
benot
handed
over
the cell
load
rapidly,
but
itRate
will
overload
control
or
reduction
is
the
basic
method
Ues
to
decrease
data
rate,
or
radio
links
to
be
deleted
congestion
control,
to
decrease
the load
of
the
forced
handover
or
other
each
time
when
downlink
neighboring
cell,
and
if the
dlMaxDecStg
is
overload
control,
this
methods
to
reduce
themethod
load,
overload
handoverhappens.
fail,
theassociate
call
would
with
maxNumUeOfDecRat,
can
decrease
the
with
the
forced
drop
is load
the
final
Configuration
Rule:
The
value
drop.
they
are
used
to
control
the
minimum
effect
to
the
online
Parameter
Function:
This
method
to
ensure
the
cell
of
thisoffparameter
shuld
make
Turn
the function
of forced
rate
of
rate
reduction.
The
service.
So
rate
parameter
indicates
the
load
can
be
reduced,
but
itis
the
cell
return
to reduction
normal
state
handover,
when
cell
overload
value
of
this
parameter
necessarily.
maximum
number
of
selected
would
increase
the
call
drop
as
quick
as
possible
and
happen, if it can not choose
should
make
load
bebeto
UEs
which
arethe
forced
to
rate.
make
the
minimum
impact
Ues to
decrease
data
rate,
it
reduced
as
quick
as
possible
dropped
each
time
when
Turn
off force
theservices
function
of forced
the
when
can online
not
Ue handover,
and
make
theother
minimum
downlink
overload
call
when
cellhappens.
overloadto
overload
happen.
and drop,
only use
method
impact
to
the
online
services
Configuration
Rule:
value
happen,
if
it
can
choose
The
larger
theThe
reduce
the value
load. not
when
downlink
overload
of
this
parameter
can
make
Ues
to
decrease
data
rate,
parameter is configured, or
the
Parameter
Function:
MBMS
congestion
happen.
the
system
equipment
run
forced
handover
or other
Parameter
Function:
This
more
UEs
are
handover
to in
related
parameter.
Maximum
If
the parameter
value
isload,
too
normal
state
as the
quick
as
methods
toindicates
reduce
the
parameter
the
other
cells,
and
more
FACH
power
adjustment
large,
it
would
cost
short
time
possible
and
make
the
there is none
method
common
overload
threshold
resource
is released
intothis
switch
for
MBMS
downlink
to
reduce
the
load
to
normal
minimum
impact
to
the
online
reduce
the
cell load,
andload
it
of
thethe
HS-DSCH.
cell,
rapider
the cell
load
state,
but
itcell
would
reduce
services
downlink
affect
the
stability.
Configuration
Rule:
TheBut
value
returncontrol
to when
normal
state.
if
Configuration
Rule:
Thisensure
overmuch
load
unnecessarily,
overload
happen.
of
this
parameter
must
the
value
of
the
parameter
is
parameter
needs
todecrease
consider
and
itlarger
affect
service
quality.
The
value
the
the
method
of
load
too
big,
it
would
select
too
Parameter
Function:
This
the
requirement
of
load
If
the
parameter
value
isittoo
parameter
configured,
the
be
done
in is
time
when
the
many
UEs
to
handover,
parameter
indicates
the
HSreduce
and
affect
the
service
small,
it
would
cost
long
time
more
resource
is
released,
HSDPA
load
is
too
high
to
would
have
serious
impact
to
DSCH
overload
recovery
Parameter
Function:
quality
as
little
as
possible
to
reduce
to
normal
the
rapider
theload
load
toSwitch
be at
ensure
thethe
system
stability
the
online
services.
threshold.
of
Interactive
the
time
when
overload
state.
reduced.
But
ifRule:
theto
value
of
and
do
best
effort
ensure
Thesame
smaller
value
the
Configuration
This
Class/Background
Class
happen.
the
parameter
is
too
big,
it
stable
service
quality.
parameter
is
configured,
the
parameter
is used
to reduce
RAB->FACH
foroverload
Overload
Turn
on
this
it UE
can
would
select
too
many
to
If
the
common
less
UEs
arefunction,
handover
tocell
the
probability
of
HSDPA
Configuration
Rule:
It
needs
decrease
the
cell
load
by
drop,
it
would
have
serious
threshold
for
HS-DSCH
is
too
other
cells,
and
the
less
state
return
to HSDPA
to
consider
the
requirement
reduce
the
maximum
impact
to
the
online
services.
high,
it would
make
the
cell of
resource
is
released
inFACH
this
overload
state
immediately
load
reduce
and
affect
the
power
when
overload
The
smaller
value
the
load
reach
a very
high
cell, the
slower
the
cell level
loadto
after
thequality
load
is
decreased
service
as
little
as the
happen,
but
itconfigured,
might
affect
the
parameter
isdecrease
but
no to
load
method
return
normal
state.
normal
state.
possible
at
the
same
time
performance
quality
of
online
less
resource
isthere
released,
in
action
when
were the
The
higher
of the
recover
when
overload
happen.
MBMS
service.
slower
the
load
to
be
large
number
of
HSDPA
UEs
threshold
forfunction
HS-DSCH
on
the
ofquality
Turn
off
this
function,
reduced.
in
the
cell,
and
it
will
affect
the
overload,
the
higher
transfer
I/B
service
to might
of
onlinestability.
MBMS
service
system
probability
of
HSDPA
cellrate
Parameter
Function:
This
CELL_FACH
state,
after
not be
affected,
butoverload
cell
But
if return
the
common
state
to HSDPA
parameter
indicates
the
decreasing
and
forced
capacity
would
be
reduced.
threshold
for
HS-DSCH
is too
overload
state
immediately
maximum
users
ofreduce
interactive
handover
cannot
Parameter
Function:
Thisthe
low,
it
would
reduce
the
after
the to
load
isRABs
decreased
or
background
to be to
cell
load
normal
state,
parameter
indicates
the
quality
of
the
online
service
normal
state.
transferred
to
FACH
from
transfer
the
only
havelow
I/B
algorithm
of Ues
load
decreasing
when
theHSDPA
cell
load
is very
The
lower
of the
recover
DCH
or
when
the
cell
service
to
CELL_FACH
state
during
common
overload
for
and
not
need
to be
threshold
fortoHS-DSCH
is
in
the cell.
overload
state.the cell
is
a method
reduce
HSDPA
decreased.
overload,
the
more
resource
Configuration
Rule:
Thethe
value
load,
but
it
would
affect
Configuration
Rule:
The
Configure
requirement
of
this
need
to
be
released
for
load
of
this
parameter
shuld
make
service
quality,
and
it
might
configuration
of
this
parameter
is:
reduce
to
normal
state
from
the
cellRACH
return
to FACH
normal
state
cause
or
parameter
is based
hsdschOverLdThr
> on
HSDPA
overload
state,
and
as
quick
as
possible
and
channel
congestion.
whether
there is requirement
hsdschRecoverThr
>impact
more
online
service's
make
thethe
minimum
to
Turn
off
function
ofquality
that
priority
of
HS subscribers
dlOverLdThr.
to
be
affected.
the
online
services
when
transfer
I/B
service
to
were entirely higher than R99
Configure
requirement:
overload
happen.
CELL_FACH
state, after rate
subscribers.
hsdschOverLdThr
> is too
If
the
parameter
value
decreasing
If
there wasand
the forced
requirement
hsdschRecoverThr
>
large,
it
would
cost
short
time
handover
the
that
prioritycannot
of HSreduce
subscribers
dlOverLdThr.
to
reduce
the
load
to
normal
cell load
to normal
were
entirely
higherstate,
than and
R99
state,
but
it would
cannot
transfer
I/Breduce
service
to
subscribers,
it could
configure
overmuch
load
unnecessarily,
CELL_FACH
state,
other
the parameter with 0 which
and
it affect
service
methods,
forcing
callquality.
drop for
means
only
R99
subscriber
If
thebeparameter
value
example,
will be to
use
tois too
can
selected
decrease
small,
itthe
would
cost
longcan
time
reduce
load,
which
load
when
overload
to
reduce
the
load
to
normal
reduce load more quickly but
happened.
state.
affect
more
If thereservice
was noquality
particular
seriously.
requirement of HS
Rate reduction of overload

control can reduce the load
effectively, and the impact to Immediately
online service is the
minimum,
so it is necessarily.
Forcing handover
can
handover fail, the call would Immediately
The default value can avoid
call drop caused by overload Immediately
control.
minimum.
minimum.
MBMS
function is turned off,
minimum.
this parameter is invalid.
Maximum FACH power
adjustment function can
reduce the MBMS cell load,
and little impact on MBMS
service
quality.
The default
value of this
system stability and do best
quality.
quality.
Because the rate of RACH
channel is low, if reducing
load by transfer service to
cell_fach state, it would make
RACH channel congestion,
so
function
is turned
Thethis
default
value
of this off.
Usually
there is no need that
minimum.
priority of HS subscribers is
entirely higher than R99
subscribers, so the default
value of this parameter is
"HS Load Decreasing
Algorithm".
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Immediately
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
service quality of high priority

users should be protected
with priority, and it also needs
to
affect the
service
quality
Function:
Low
RTWP
Load as
little
as
possible
at
the
same
Threshold of a cell
time.
Related factor: load
When users attempting to
distribution
transfer
fromprivate
FACH or
DCH to
ZTE defines
interface
HS-DSCH
or
E-DCH
is
to exchange load information
refused
because
of HSin
Multi-mode
system.There
Function:
medium
RTWP
DSCH
or
E-DCH
user
number
are
three
load states:
low
Load
Threshold
of
a "On"
cell
limit,
if
this
switch
is
, it
load, medium
load, high load.
Related
factor:
would force
theload
onpayload
line lowof a
When
the
RTWP
distribution
Function:
High
RTWP
Load
priority
HS-DSCH
or E-DCH
cell
isdefines
lower
than
the
value
ZTE
private
interface
Threshold
of
a
cell
users
transfer
to
CELL_FACH
indicated
by the
parameter,
it
to
exchange
load
information
Related
factor:
load
state,
sothe
that
the
higher
means
RTWP
load
state
in
Multi-mode
system.There
distribution
priority
users
could
use HSof
the
cell
is low.The
are
three
load
states:
low If
ZTE
defines
private
interface
DSCH
or
E-DCH
resource.
parameter
is greater,
then
the
load,
medium
load,
high
load.
to
exchange
load
information
this
switch
is
"Off"
,
it
would
possibility
of
low load
stateofisa
When
the
RTWP
payload
in
Multi-mode
system.There
not
cause
theTCP
on line
HSunction:
Low
Load
easier.
cell
is lower
than
the
value
are
three
load
states:
low
DSCH
or
E-DCH
users
Threshold
of the
a cell
indicated
by
parameter,
it
load,
medium
load,
high
load.
transfer
to
CELL_FACH
state
Related
factor:
loadload
Suggestion:
default
value
is
means
the
RTWP
state
If
the RTWP
cell
when
failed topayload
transferoftoa HSdistribution
recommended
of
the cell
is medium.The
is
lower
the value
DSCH
orthan
E-DCH
during
ZTE
defines
private
interface
parameter
is
greater,
then
the
indicated
parameter,
it
DRBC
dueby
tothe
user
number
Function:
Medium
TCP
Load
to
exchange
load
information
possibility
of
medium
load
means
the
RTWP
load
state
limitation.
Threshold
of
a
cell
in
Multi-mode
system.There
state
iscell
easier.
of
is high.If
Related
factor:
loadthelow
arethe
three
load
states:
payload
of
a
cell
is greater
distribution
load, medium load,
high load.
Function:
high
TCP
Load
than
the
indicated
bya
ZTE
private
interface
Whendefines
thevalue
TCP
payload
of
Threshold
of
a
cell
the
parameter,
the
RTWP
to
load the
information
cellexchange
is lower than
value
Related
factor:
load
load
state
of the
the
cell is
in
Multi-mode
system.There
indicated
by
parameter,
it
distribution
overload.The
parameter
are
three
states:
lowis of
means
theload
TCP
load state
ZTE
defines
private
interface
greater,
then
the
possibility
of
load,
medium
load,
high
load.
the cell
is
low.The
parameter
to
exchange
load
information
high
load
is
When
thestate
TCP
payload
of a
is
greater,
then
theeasier.
possibility
in
system.There
cell
is lower
than
the
value
of Multi-mode
low
load state
is
easier.
are
three
load
states:
low it
indicated by
the
parameter,
Function:
Low
Code
payload
load,
medium
load,
high
means
the
TCP
load
state
Threshold
ofdefault
a cell valueload.
Suggestion:
isof
If
the
TCP
payload
of
a
cell
is
the
cell
is
medium.The
Related
factor: loadCode
recommended
Function:
lower thanmedium
thegreater,
value indicated
parameter
is
then
the
distribution
payload
Thresholditofmeans
a cell
by
the
parameter,
possibility
of private
medium
load
ZTE
defines
interface
Related
factor:
load
the
TCP
loadload
stateinformation
of the cell
state
is easier.
to
exchange
distribution
is
high.If
the
payload
of a cell
in
Multi-mode
system.There
ZTE
defines
private
interface
is
greater
than
the
value
Suggestion:
default
value
are
three loadload
states:
low is
to
exchange
information
indicated
by
the
parameter,
recommended
load,
medium system.There
load, high load.
in
Multi-mode
the
TCPload
state
of the of
cell
When
theload
Code
payload
are
three
states:
low isa
is
overload.The
parameter
cell
ismedium
lower than
thehigh
value
load,
load,
load.
Function:
Low
CE
payload
greater,
then
the
possibility
of
indicated
by
the
parameter,
When
the
Code
payload
of ait
Threshold
of
a
cell
high
load
state
is
easier.
means
the Code
load
state of
cell
is lower
than
the value
Related
factor:
load
the
cell
is
low.The
parameter
indicated
by default
the parameter,
distribution
Suggestion:
value is it
Function:
CE
is
greater,
then
the
possibility
means
themedium
Code
load
state of
ZTE
defines
private
interface
recommended
payload
Threshold
a cell
of
low
load
state is of
easier.
the
cell
is
medium.If
the
to
exchange
load
information
Related
factor:
load
occupied
codesystem.There
resource
is
in
Multi-mode
distribution
Suggestion:
default
value is
greater
than
the
value
are
three
loadprivate
states:interface
low
ZTE
defines
recommended
indicated
by this
parameter,
it
load,
medium
load,
high load.
to
exchange
load
information
means
thatCE
thepayload
code resource
When
the
of
a
in
Multi-mode
system.There
load
is than
high.The
cell
isstate
lower
the value
are
three
load
states:
low
Function:
Low
HSDPA
userthe
parameter
is the
greater,
then
indicated
by
parameter,
it
load,
medium
load,
high
load.
number
Threshold
of
a
cell
possibility
of
medium
load
means
the
CE
load
state
of
When
CE payload
of a
Related
factor:
load
state
isthe
easier.
the cell
is
low.The
parameter
cell
is lower
than the
value
distribution
is
greater,by
then
the
possibility
indicated
the
parameter,
ZTE
defines
private
interface
Suggestion:
default
value
is it
of
low
load
state
is
easier.
means
the
CE
load
state
of
to
exchange load information
recommended
the
cell is medium.If
the CE is
in
Multi-mode
system.There
Suggestion:
default
value is
greater
than
the
value
are
three load states: low
recommended
indicated
by this
parameter,
it
load,
medium
load,
high load.
means
thatHSDPA
the CEuser
resource
When the
load
state
is high.The
number
payload
of a cell is
parameter
then the
lower than is
thegreater,
value indicated
possibility
of
medium
load
by the parameter, it means
state
is
easier.
the HSDPA user number load
Suggestion:
default
value is
state
of the cell
is low.The
recommended
parameter is greater, then the
possibility of low load state is
easier.
Because the rate of RACH

channel is low, if reducing
load by transfer service to
Immediately
cell_fach state, it would make
RACH channel congestion,
so this function is turned off.
load distribution and
operator's idea are
Immediately
default value.
operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
ZTE defines private interface

to exchange load information
in Multi-mode system.There
are
three load
Function:
Low states:
HSUPAlow
user
load,
medium
load,ofhigh
load.
number
Threshold
a cell
When
the
HSDPA
user
Related
factor:
loadHSUPA
Function:
medium
number
payload
of a cell is
distribution
user
number
Threshold
of a
lower
than
the
value
indicated
ZTE
defines private interface
cell
by
the parameter,
it means
to exchange
load
information
Related
factor:
load
theMulti-mode
HSDPA
user
number load
in
system.There
distribution
state
of the
cellstates:
is medium.If
are
three
load
low
ZTE
defines
private
interface
the
HSDPA
user
number
is
load,
medium
load,
high
load.
to
exchange
loadvalue
information
greater
than
the
When
the HSUPA
user
in
Multi-mode
system.There
indicated
by this
parameter,
number
payload
of
a cell
is it
are
three
load
states:
low
Function:
Low
MBMS
user
means
that
the
HSDPA
user
lower medium
than theload,
valuehigh
indicated
load,
load.
number
Threshold
ofmeans
a cell
load state itis
high.The
by
the the
parameter,
When
HSUPA
user
Related
factor:
load
parameter
isuser
greater,
thenload
the
the
HSUPA
number
number
payload
of
a cell
is
distribution
possibility
of
medium
load
Function:
medium
MBMS
state
of
the
cellvalue
is low.The
lower
than
the
indicated
ZTE
defines
private
interface
state
is
easier.
user
number
Threshold
of the
a
parameter
is
greater,
then
by
the
parameter,
it
means
to
exchange
load
information
Suggestion:
default
value
isis
cell
possibility
of
low
load
state
the
HSUPA user
number load
in
Multi-mode
system.There
recommended
Related
factor:
load
easier.
state
of the
cellstates:
is medium.If
are
three
load
low is
distribution
Suggestion:
default
value
the
HSUPA
user
number
is
load,
medium
load,
high
load.
ZTE
defines
private
interface
recommended
greater
than
the
value
When
the MBMS
user
to
exchange
loadparameter,
informationit
indicated
by this
number
payload
of
a cell is
in
Multi-mode
system.There
means
thatthe
thevalue
HSUPA
user
lower
than
indicated
are
three
load
states:
low
Function:
Lowstate
signal
user
number
load
ismeans
high.The
by
the
parameter,
it
load,
medium
load,ofhigh
load.
number
Threshold
a cell
parameter
is
greater,
then
the
the
MBMS
user
number
load
When
the
MBMS
user
Related
factor:
load
possibility
of
medium
load
state
of the
cell isoflow.The
number
payload
a cell is
distribution
state
is easier.
parameter
is
greater,
then the
lower
than
the
value
indicated
ZTE
defines
private
interface
Suggestion:
default
value
possibility
of
low
load
stateisis
by
the parameter,
it means
to
exchange
load
information
recommended
ZTE
defines
private
interface
easier.
the
MBMS user
number load
in
Multi-mode
system.There
to
exchange
load
information
Suggestion:
default
value is
state
of
the
cell
is
medium.If
are
three load system.There
states:
low
in
Multi-mode
recommended
the
MBMS
user
number
is
load,
medium
load,
high
are
three
load
states:
lowload.
greater
than
the
value
When
the signal
user
number
load,
medium
load,
high
load.
indicated
it
payload
ofby
a this
cell parameter,
is lower
than
When
the
signal
user
number
means
that
the MBMS
user
the
value
indicated
by
the
payload
of a cell
is is
lower
than
number
load
state
high.The
parameter,
it means
the
the
value
indicated
by
the
parameter
greater, thenstate
the
signal
userisitnumber
parameter,
meansload
the
possibility
of
medium
load
of
the cell
isnumber
low.Theload state
signal
state
isuser
easier.
parameter
is
greater, then
of the cell is medium.If
the the
possibility
low load
is
signal
userofnumber
is state
greater
easier.
This
indicatesby
than parameter
the value indicated
SCPICH
Configuration
this parameter,
it meansObject
that
ID.
should
be number
unique under
the Itsignal
user
load
the
object parameter
stateparent
is high.The
Function:
Common
Physicalis
UUtranCellFDD.
Parameter
Function:
This of
greater, then
the possibility
Channel
Identity.
parameter
indicates
the
S- of
medium
load
state
is
easier.
Configuration Rule: CPCId
CPICH
transmission
power.
different common
physical
Function:
This parameter
Configuration
Rule:
The
channels
of the
same
cellvalue
indicates the
power
offset
of
of
this parameter
is based
should
be related
different.
S-CPICH
to
the P- on
the
requirement
of cell portion
Adjustment
Suggestion:
CPICH
power.
coverage
and
system
CPCId of different
Configuration
Rule:common
capacity.
physical
channels
of the is,
The
larger
the parameter
The
bigger
this
parameter
is,
same
cell should
be different.
the smaller
the power
offset
the
bigger
coverage,
but
too
of S-CPICH relative to the Pbigger S-CPICH
will
CPICH
is, but thepower
S-CPICH
generate
unnecessary
will bring more
interference to
interference,
and
reduceand
the
the non-MIMO
services,
system
capacity.
takes more available downlink
The
smaller this parameter is,
Tx power.
the
smaller
Adjustment coverage.
Suggestion:
Note:
Cell of
portion
notis
If
the CQI
MIMOisUE
support
now.
small, the
parameter could be
increased
to improve
the the
This parameter
indicates
MIMO
services
experience.
PICH Configuration Object ID.
But the performance of nonMIMO services and cell
capacity should be
considered as well when the
value is increased.

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately

operator's idea are
default value.
Immediately
Basic index
Can't Modify
N/A
Cann't Modify

SCPICH and system
capacity.
Immediately
It is set to the max value to

guarantee the MIMO users'
experience.
Take effect after

the change is
loaded to the
RNC
Basic index
Cann't Modify
No
No
No
No
No
No
No
No
No
No
No
Yes

indicates the common
Function:
This parameter
physical channel
ID of the
indicates
the
number of the PI
PICH.
(Paging
Indicator)
one
Configuration
Rule:that
It should
PICH
radio frame
be guaranteed
thatcontains.
Common
Configuration
Rule:
Physical Channel
IDThe
is unique
capacity
requirement
of the
for one common physical
paging
notification
and
channel within a cell.
downlink power resource.
The larger Np, the lower the
repetition of each PI, and the
higher power is needed. So in
order to save power this
parameter
should
be set to
This parameter
indicates
the
the
minimum
values
which
Service Function Object
ID.
satisfies the paging
requirement.
This parameter
indicates the
Function:
This parameter
Service
Configuration
indicatesBasic
the sub
service
Object
ID. for numbering for
type, used
each sub service.
Configuration Rule: 0...5 are
used for siganlling service;
service.
is
Function:Odd
Thisnumber
parameter
configured
for
downlink
indicates whether this service
service;
number
is
is MBMSeven
service,
Qchat
configured
for
uplink
service.
service or normal service.
Different
service
hasThis
different
Configuration
Rule:
is
identity.
basic service identity
parameter, once it is
configured, it can not be
modified.
This is service type
Function:
Thisparameter.
parameter
identification
indicates the maximum bit
rate of a sub service. The
parameter takes the value of
the assigned maximum bit
rate in RAB parameters
Configuration
This is
Function: ThisRule:
parameter
basic
service
type
indicates whether a sub
identification
parameter.Once
service is uplink
or downlink.
itConfiguration
is configured,Rule:
it should
Odd not
be
modified.
number
services
are
downlink
and
even
number
services
indicates whether the sub
are
uplink.
basic or in
service
is inThis
CS is
domain
service
type
identification
PS domain.
parameter.
Function:
ThisRule:
parameter
Configuration
This is
Function
of
parameter:
indicates
thethis
service
type ofit
basic service
identification
indicates
whether
the
the
sub service,
whichrelease
can be
parameter
and should
be
of
PTM
radio
bearer
conversational,
streaming,
configured accordingisto the
permitted
orbackground
notthe
forservice
a MBMS
interactive,
or
actual domain
service.
Factors
of
unknown
conversational.
used. Once it is configured, it
consideration:
downlink
Configuration
Rule:
Thiscode
is
will not be modified.
and
power
resource.
basic service type
If
this switch is
closed, it and
won't
identification
parameter
allow
release
the PTM
shouldtobe
configured
radio
bearer,
which
means
according
to the
actual
traffic
that
adopt
PTMit for
type itofonly
the can
service.
Once
is
the
service; itif should
this switch
is
configured,
not be
open,
it will allow to release
modified.
the PTM radio bearer, which
means that when the number
of UE which wish to receive
MBMS service is greater than
UE number threshold used
for switching between PTP
and PTM, then it will choose
Different value ranges are

defined for different common Take effect after
physical channels, the default the cell is deleted
value gurrantees it is unique and setup again
in the cell.
Considering together the
capacity requirement of the
paging notification and
downlink power resource.
Immediately at
commit.
Basic index
Cann't Modify
Basic index
Cann't Modify
0...5 are used for siganlling

service; 6...250 are used for
single service. Odd number
is configured for downlink
service; even number is
configured for uplink service.
Different service has different
identity.
This is basic service type
identification parameter.Once
it is configured, it should not
be modified.
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

shall not affect
ongoing services)
At next use (i.e.,

Identification parameter, can
shall not affect
not be modified.
ongoing services)
At next use (i.e.,
identification parameter.Once
shall not affect
it is configured, it should not
ongoing services)
be modified.
Odd number services are
downlink and even number
services are uplink. This is
basic service type
identification parameter.
At next use (i.e.,

shall not affect
ongoing services)

domain the service used.
At next use (i.e.,

shall not affect
ongoing services)

identification parameter and
should be configured
according to the actual traffic
type of the service. Once it is
configured, it should not be
modified.
it is set according to the
downlink code and power
resource.
At next use (i.e.,

shall not affect
ongoing services)
Immediately
No
No
No
No
No
No
No
No
No
No
No
No

Function:
This configuration
parameter
UE DTX/DRX
indicates
theindicates
maximuma set of
Index which
number
of parameters.
retransmissions
DTX/DRX
Eachfor
the
sub
service
when
it
is
service obtains the DTX/DRX
beared
on
E-DCH.
parametersFunction:
accordingThis
to the
Parameter
Related
Factor:
service
UE
DTX/DRX
configuration
parameter
indicates
the data
accuracy,
service
index. traffic
uplink
Eb/N0data
used in
throughput;
Configuration
Rule:
Different
uplink
equivalent
AMR
users
If
the parameter
value
is
services
use different
number
calculation
algorithm,
larger,
isfor
more
times
of
DTX/DRX
parameters,
which
and
it isthere
used
power
HARQ
retransmission.
are identified by different
control.
Accordingly,
will improve
the
index.
Configurationit Rule:
It needs
service
datathe
accuracy
to
consider
systembut
affect
theand
service
dataquality.
capacity
service
throughput.
Bigger this parameter is,
If
the parameter
bigger
equivalentvalue
AMRis
smaller,
there
is
less
number for a service,times
easierof
HARQ
retransmission.
the parameters of high load
Accordingly,
will
improve
the
This
parameter
indicates
the
scene
will beitused,
and worse
service
throughput
configuraton
IDbut
of abetter
UE but
service data
quality,
affect
service data of MO:
internal
measurement
systemthe
capacity.
accuracy.
UUeIntMeasProfile.
Different
Smaller this parameter
is,
UE
internal
measurement
smaller equivalent AMR
should
numberhave
for aidentical
service, easier
configuraion
ID.of low load
the parameters
scene
will bewhich
used,isand better
Basic index
service quality,
butsystem
worse
configured
by the
system capacity.
automatically.
Function: RLC mode of the
measurement
report
Basic index which
is
Related
factor:
accurate
configured
by the
systemof
transmit,
and system capacity
automatically.
If the value is AM RLC, RNC
Function:
L3UE
filtering
can request
for on the
measurement
retransmissionresults
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
continuous) . If the
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
Function:
number
of events
If
the value
isof
bigger,
this foris
transmission
signalling.It
required
to be
configured
measurement
has
less
not
suggested
to adjust
the
a
certain
purpose
of UEimpact
on
final
intra-frequency
parameter
internal
measurement
measurement
Related factor:results.
measurement
Otherwise,
if the
value
is
purpose The
Function:
time
to trigger
smaller,
this
measurement
The
parameter
setting
is
the UE internal measurement
has
more
impact.
based
on how
many events
report
This
parameter
is isnot
will be used.That
to
say,
Configuration
Rule:
It needs
suggested
to
be
adjusted.
Event
number
is
defined
by
to
consider
the
user
Measurement event identity
measurement
purpose.
experiences
and
utilization
The configuration should be
This
parameter
not3GPP
ratio
of radio resources.
set according
toisthe
suggested
to
be
adjusted.
The
smaller
the time to trigger
and RRM
algorithm
is,
the faster
system of
requirement.
Function:
Thethe
threshold
report
the
measurement
Event 6a and 6b for UE Tx
when
Powerthe reporting criteria is
satisfied,
and the
better
thethe
Configuration
Rule:
When
user
experience
is.
But
if
cell load high and the ratiothe
of
value service
is too small,
it will
AMR
is high,
thecause
over
frequent
measurement
threshold
should
be set to the
report
which
will
waste
value that the Event
6athe
is
radio
resources.
easy to be triggered and
The
larger
time to
to be
trigger
Event
6b isthe
difficult
is
,
the
slower
the
system
triggered.
report
the measurement
The
larger
the Event 6a
when
the reporting
criteria
is
threshold
is, the more
difficult
satisfied,
the
worse
the
user
the Event 6a could be
experience
triggered. is;
The larger the Event 6b
threshold is, the easier the
Different services use

different DTX/DRX
parameters, which are
identified by different index.
There are two sets of
DTX/DRX parameters
configured for realtime and
non-realtime services by
The
service data accuracy
default.
and the service data
throughput are considered to
At next use (i.e.,

shall not affect
ongoing services)
New connection
Consider the system capacity

Immediately
and service quality.
Basic index
Cann't Modify
Basic index
Cann't Modify
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

to consider the requirement
of AMR dynamic control.
Next
measurement
control
The reason of the

Next
measurement
control
It is optimized in the field of

Next
Austria. It is not suggested to measurement
adjust.
control
No
No
No
No
No
No
No
No
No
No
No
No
Function: RLC mode of the

measurement
report
Basic index which
is
Related
factor:
accurate
configured
by the
systemof
transmit,
and system capacity
automatically.
If the value is AM RLC, RNC
Function:
L3UE
filtering
can request
for on the
measurement
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
Function:
number
of events
If
the value
isof
bigger,
this foris
transmission
signalling.It
required
to be
configured
measurement
has
less
not
suggested
to adjust
the
a
certain
purpose
of UEimpact
on
final
intra-frequency
parameter
internal
measurement
measurement
measurement
Otherwise,
if the
value
is
purpose The
Function:
time
to trigger
smaller,
this
measurement
The
parameter
setting
is
has
more
impact.
based
on how
many events
report
This
parameter
is isnot
will be used.That
to
say,
Configuration
Rule:
It needs
suggested
to
be
adjusted.
Event
number
is
defined
by
to
consider
the
user
measurement
purpose.
experiences
and
utilization
This
parameter
not3GPP
ratio
of radio resources.
set according
toisthe
suggested
to
be
adjusted.
The
smaller
the time to trigger
and RRM
algorithm
is,
the faster
system of
requirement.
Function:
Thethe
threshold
report
the
measurement
when
satisfied,
and the
better
thethe
Configuration
Rule:
When
user
experience
is.
But
if
of
value service
is too small,
it will
AMR
is high,
thecause
over
frequent
measurement
threshold
should
be set to the
report
which
will
waste
6athe
is
radio
resources.
The
larger
time to
to be
trigger
Event
6b isthe
difficult
is
,
the
slower
the
system
triggered.
report
the measurement
The
larger
the Event 6a
Function:
RLC
ofdifficult
theis
when
the reporting
criteria
threshold
is,
themode
more
measurement
report
satisfied,
the
worse
the
user
Basic
index
the Event
6awhich
couldisbe
Related
accurate
experience
is; the
configured
by
systemof
triggered.factor:
transmit,
and
system
capacity
automatically.
If
the
value
is
AM
RLC,
RNC
threshold
is,
the
easier
Function:
L3UE
filtering
onthe
the
can
request
for
Event
6b couldresults
be triggered.
measurement
retransmission
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
Function:
number
of events
If
the value
isof
bigger,
this foris
transmission
signalling.It
required
to be
configured
measurement
has
less
not
suggested
to adjust
the
a
certain
purpose
of UEimpact
on
final
intra-frequency
parameter
internal
measurement
measurement
measurement
purpose
smaller,
this measurement
The parameter
setting is
has
more
impact.
based on how
many events
This
parameter
will be
used.Thatis isnot
to say,
suggested
to be
adjusted.
Event
number
is
defined
by
measurement
purpose.
The
configuration
should be
This
parameter
not3GPP
set according
toisthe
suggested
to
be
adjusted.
and RRM algorithm
requirement.
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control

Next
adjust.
control
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

is,
the faster
system of
Function:
Thethe
threshold
report
the
measurement
when
satisfied,
and the
better
thethe
Configuration
Rule:
When
user
experience
is.
But
if
of
value service
is too small,
it will
AMR
is high,
thecause
over
frequent
measurement
threshold
should
be set to the
report
which
will
waste
6athe
is
radio
resources.
The
larger
time to
to be
trigger
Event
6b isthe
difficult
is
,
the
slower
the
system
triggered.
report
the measurement
The
larger
the Event 6a
Function:
RLC
ofdifficult
theis
when
the reporting
criteria
threshold
is,
themode
more
measurement
report
satisfied,
the
worse
the
user
Basic
index
the Event
6awhich
couldisbe
Related
accurate
experience
is; the
configured
by
systemof
triggered.factor:
transmit,
and
system
capacity
automatically.
If
the
value
is
AM
RLC,
RNC
threshold
is,
the
easier
Function:
L3UE
filtering
onthe
the
can
request
for
Event
6b couldresults
be triggered.
measurement
retransmission
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
Function:
of
operators.
It can
guarantees
UM RLC, Amount
the
retransmission
Reporting
in
Period
Report
the
filtering
results and
is not
required.Signalling
is
Criteria.
reflects
the measurement
more important.
AM mode
Configuration
Rule:
It needs
results
in time.
can provide
the
reliable
to
consider
radio
resource
If
the
value
is
bigger,
this ofis
transmission of signalling.It
Uu
interface
and
the
user
measurement
has
less
impact
not
suggested
to adjust
the in
Function:
Reporting
Interval
experience.
on
final
intra-frequency
parameter
Period
Report
Criteria.
The
larger
the results.
value is, the
measurement
Configuration
Rule:
It needs
periodic
reports
be
more,
Otherwise, if thewill
value
is
to
consider
radio
resource
of
and
it willthis
occupy
more radio
smaller,
measurement
Uu
interface
and
the
user
resource
Uu interface.
has moreof
impact.
experience.
The
of thisisparameter
is
This value
parameter
not
The
value
this
parameter
smaller,
theof
reports is
suggested
toperiodic
be adjusted.
smaller,
the and
periodic
reports
will be less,
the response
will
bechanging
more frequent,
to the
of the and it
will
occupyphysical
more radio
measured
quantity is
resource
of
also slower, Uu
andinterface.
it will
The
valuethe
of this
influence
userparameter is
larger,
theRLC
periodic
reports
Function:
mode
of thewill
experience.
be
more
sparely,
and
measurement
report
Basic index which is the
response
toby
UE's
traffic
Related
factor:
accurate
configured
the
systemof
volume
demand
is
also
transmit,
and system
capacity
automatically.
slower,
and is
it will
If
the value
AM influence
RLC, RNC
Function:
L3UE
filtering
the user
experience.
can
request
for on the
measurement
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
Function:
number
of events
If
the value
isof
bigger,
this foris
transmission
signalling.It
required
to be
configured
measurement
has
less
not
suggested
to adjust
the
a
certain
purpose
of UEimpact
on
final
intra-frequency
parameter
internal
measurement
measurement
measurement
purpose
smaller,
this measurement
The parameter
setting is
has
more
impact.
based on how
many events
This
parameter
will be
used.Thatis isnot
to say,
suggested
to be
adjusted.
Event
number
is
defined
by
measurement
purpose.
The
configuration
should be
This
parameter
not3GPP
set according
toisthe
suggested
to
be
adjusted.
and RRM algorithm
requirement.
The reason of the

Next
measurement
control

Next
adjust.
control
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

The reason of the
Next
measurement
control
Next
measurement
control
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No

is, the faster the system
Function:
threshold of
report the The
measurement
Event
6f and
6g for criteria
UE Rx-Tx
when the
reporting
is
time
differnece
satisfied,
and the better the
Configuration
Rule:
When
the
user experience
is. But
if the
RL
often
lost
synchronization,
value is too small, it will cause
the
be set to
overthreshold
frequent should
measurement
the
value
thatwill
thewaste
Eventthe
6f is
report
which
easy
be triggered and
radio to
resources.
Event
6g isthe
difficult
The larger
time to
to be
trigger
triggered.
is , the slower the system
The
larger
the Event 6f
report
the measurement
threshold
is,
themode
more
Function:
RLC
ofdifficult
theis
when the reporting
criteria
the
Event
6f
could
be
measurement
report
satisfied,
the
worse
the
user
Basic index which is
triggered.
Related
factor:
accurate
experience
is; the
configured
by
systemof
The
largerand
thesystem
Event 6g
transmit,
capacity
automatically.
threshold
is,isthe
If
the value
AMeasier
RLC, the
RNC
Function:
L3UE
filtering
on the
Event
6g could
be
can
request
fortriggered.
measurement
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
Function:
number
of events
If
the value
isof
bigger,
this foris
transmission
signalling.It
required
to be
configured
measurement
has
less
not
suggested
to adjust
the
a
certain
purpose
of UEimpact
on
final
intra-frequency
parameter
internal
measurement
measurement
measurement
Otherwise,
if the
value
is
purpose The
Function:
time
to trigger
smaller,
this
measurement
The
parameter
setting
is
has
more
impact.
based
on how
many events
report
This
parameter
is isnot
will be used.That
to
say,
Configuration
Rule:
It needs
suggested
to
be
adjusted.
Event
number
is
defined
by
to
consider
the
user
measurement
purpose.
experiences
and
utilization
This
parameter
not3GPP
ratio
of radio resources.
set according
toisthe
suggested
to
be
adjusted.
The
smaller
the time to trigger
and RRM
algorithm
is,
the faster the system
requirement.
Function:
threshold of
report the The
measurement
Event
6f and
6g for criteria
UE Rx-Tx
when the
reporting
is
time
differnece
satisfied,
and the better the
Configuration
Rule:
When
the
user experience
is. But
if the
RL
often
lost
synchronization,
value is too small, it will cause
the
be set to
overthreshold
frequent should
measurement
the
value
thatwill
thewaste
Eventthe
6f is
report
which
easy
be triggered and
radio to
resources.
Event
6g isthe
difficult
The larger
time to
to be
trigger
triggered.
is , the slower the system
The
larger
the Event 6f
report
the measurement
threshold
is,
themode
more
Function:
RLC
ofdifficult
theis
when the reporting
criteria
the
Event
6f which
could
be
measurement
report
satisfied,
the
worse
the user
Basic
index
is
triggered.
Related
factor:
accurate
experience
is; the
configured
by
systemof
The
largerand
thesystem
Event 6g
transmit,
capacity
automatically.
threshold
is,isthe
If
the value
AMeasier
RLC, the
RNC
Function:
L3UE
filtering
on the
Event
6g could
be
can
request
fortriggered.
measurement
after receiving
This
valueSDU
is the
experience
the error
label
(not
of
many
vendors
and
value is
operators.
It can
guarantees
UM RLC, the
retransmission
the
filtering
results and is
is not
required.Signalling
reflects
the measurement
more important.
AM mode
results
in time.
can provide
the reliable
If
the value isof
bigger,
this is
transmission
signalling.It
measurement
has
less
not suggested to adjustimpact
the
on
final intra-frequency
parameter
has more impact.
This parameter is not
The reason of the

Next
measurement
control
The default value has not

been optimized in the field,
so the value is set to the
minimum value.
Next
measurement
control
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The default value has not

been optimized in the field,
so the value is set to the
minimum value.
Next
measurement
control
Basic index
Cann't Modify

system capacity are
default value.
Next
measurement
control

default value.
Next
measurement
control
No
No
No
No
No
No
No
No
No
No
No
No
Function: number of events

required to be configured for
a certain purpose of UE
internal measurement
Related factor: measurement
purpose The time to trigger
Function:
The
parameter
is
the UE
internal setting
measurement
based on how many events
report
will be used.That
is to
say,
Configuration
Rule:
It needs
Event
number
is
defined
by
to
consider
the
user
measurement
purpose.
experiences
and
utilization
Thisaccording
parameter
not3GPP
ratio
of radio resources.
set
toisthe
Function:
The
threshold
of
suggested
tothe
be
adjusted.
The
smaller
time
to trigger
and RRM
algorithm
Event
6a
and
6b
for
UE
Tx
is,
the
faster
the
system
requirement.
Power.
report the measurement
Configuration
Rule:criteria is
when the reporting
Considering
satisfied, andthe
thehardness
better theof
10ms
E-TTI
switching
user experience is. Buttoif 2ms
the
and
throughput.
valuethe
is system
too small,
it will cause
When
the cell measurement
load high and
over frequent
the
ratio
of HSUPA
service
report
which
will waste
the is
high,
threshold should be
radio the
resources.
set
the value
thattothe
Event
Thetolarger
the time
trigger
6a
is
easy
to
be
triggered
is , the slower the system and
Event
difficult to be
report 6b
theismeasurement
triggered.
when the reporting criteria is
This
parameter
indicates
The
larger
theworse
Event
6a user
satisfied,
the
the
Object
ID
of
Cell
Reselection
threshold
is,
the
more
difficult
experience
is;
Function:
priority
of
Frequency
and
Priority
the Event absolute
6a
could
be
serving
cell
Information
Function:
triggered. Cpich RSCP
Related
factor:
UE camping
threshold
tothe
trigger
The larger
Event
6b
This
parameter
smaller,
measurement
threshold is, theiseasier
thethe
priority
is
lower.Otherwise,
Related
factor:
difficulty
level
Event 6b could be triggered.
this
parameter
is bigger, the
to trigger
measurement
priority
is higher.is bigger, it is
This
parameter
Function:
Cpich EcNo
If
UE
is
expected
to camp on
easier
for
UEtrigger
to measure
threshold
to
some
frequency/RAT,
other
frequencies withthe
equal
measurement
prioirty
this frequency/RAT
or loweroffactor:
priority,
or otherlevel
Related
difficulty
can
be set bigger.
system
lower priority.
to triggerwith
measurement
Otherwise,
this
This parameter parameter
is bigger, itisis
smaller,
it
is
harder
for UE to
easier for UE to measure
measure
other
frequencies
Function:
serving
cell
other frequencies with equal
with
equal
or absolute
lower
priority, or
threshold
for
or lower
priority,
or other
other
system
with lower
priorities
celllower
reselection
system
with
priority.
priority.
Related
factor:
level
Otherwise,
this difficulty
parameter
is
When
measurement
easier
to
trigger
smaller,
itreselection
is harder foris UE
to
Function:
serving
cell
to
start,
handset
consume
This
parameter
iswill
bigger,
it is
measure
other
frequencies
threshold
more
power.
easier
for for
UE
to reselect
to or
with equal
or absolute
lower
priority,
priorities
cell reselection
other
other frequencies
system
with with
lowerequal
based
onpriority,
RSRQor other
or
lower
priority.
Related
factor:
difficulty
level
system
with lower
When measurement
is easier
to
trigger
reselection
priority.Otherwise,
this
to start, handset will consume
This
is bigger,
parameter
is smaller,
it is it is
moreparameter
power.
easier
UE
to
to
harder for
for the
UE number
to reselect
reselect
to
Function:
of interother
equal
other frequencies
frequencies
with
equal
frequency
layers inwith
UTRAN
or
priority,
or
or lower
lower factor:
priority,The
or other
other
Related
value of
system
with
lower
system
with lower
priority.
this
parameter
is determined
priority.Otherwise,
this
by operator's UTRAN
parameter resources.
is smaller, it is
frequency
harder
for UE toisreselect
This parameter
bigger, to
the
other
frequencies
equal
number of UTRANwith
centre
or
lower priority,
or other
frequencies
Function:
theis
downlink
carrier
system
with
lower
priority.
more.Otherwise,
central frequencythis
of the cell
parameter
is smaller,
the of
Related
factor:
The value
number
of UTRAN
centre
this parameter
is determined
frequencies
is less.
by operator UTRAN
resources and network
planning.
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
The reason of the

Next
measurement
control
It is determined by
Next
considering the hardness of
measurement
10ms E-TTI switching to 2ms
control
and the system throughput.
Basic parameter
Cann't Modify
Which layer UE is expected

to camp on is mainly
default value.
When system
information is
changed.
The difficulty level to trigger

measurement is mainly
default value.
When system
information is
changed.

measurement is mainly
default value.
When system
information is
changed.

reselection is mainly
default value.
When system
information is
changed.

default value.
When system
information is
changed.
Operator's frequency
resources is mainly
default value.
When system
information is
changed.
N/A
When system
information is
changed.
No
No
No
No
No
No
No
No
No
No
No
No
Function: absolute reselection

priority of UTRAN
Related factor: UE camping
This parameter is smaller, the
priority is lower.Otherwise,
Function:
threshold
for cell
this parameter
is bigger,
the
reselection
to a higher priority
priority is higher.
UTRAN
cell
If UE is expected
to camp on
Related
factor: difficulty
some frequency/RAT,
thelevel
to
trigger
reselection
prioirty of this frequency/RAT
This
parameter
is bigger,
can be
setthreshold
bigger.
Function:
for cell
reselection
to
higher
priority
reselection to an equal
or
UTRAN
cell
isUTRAN
Function:
minimum
required
lower
priority
cell
harder.Otherwise,
this interquality
of UTRAN
Relatedlevel
factor:
difficulty
level
parameter
is
smaller,
frequency
cell for reselection
to trigger reselection
reselection
to higher
priority
Related
factor:
the
coverage
This parameter
is bigger,
UTRAN
cell
is
easier.
of
UTRAN
inter-frequency
cell
reselectionminimum
to equal required
or lower
Function:
with
absolute
priorities
priority UTRAN
received
power cell
levelisof
This
parameter
is bigger,
the
harder.Otherwise,
this cell
UTRAN
inter-frequency
CPICH
EcNo
coverage
of
cell
parameter
is
smaller,
for reselection
is
smallerfactor:
and
UE
harder
reselection
to equal
or
lowerto
Related
theiscoverage
camp
on
this
cell.
priority
UTRAN
cellOtherwise,
is easier.
of
UTRAN
inter-frequency
cell
this
parameter
is
smaller, the
with absolute priorities
CPICH
EcNo coverage
ofthe
cell
This parameter
is bigger,
becomes
bigger
and
UE
is
CPICH RSCP coverage of
easier
to camp
on UE
this
cell,
Function:
indicates
theis
cell is smaller
and
but
UE to
might
noton
receive
number
ofcamp
GSM
frequency
harder
this cell.
system
information
correctly
groups
Otherwise,
this parameter
is
on
this
cell.
Related
factor:
The
value of
smaller, the CPICH RSCP
Suggestion:
The
default
value
this
parameter
isbecomes
determined
coverage
of cell
is
recommended.
by
operator's
GSM
frequency
bigger and UE is easier to
resources
andcell,
configuration
camp on this
but UE
of
GSM
network.
might
not
receive
system
Function: frequency band the
This
parameter
is bigger,
the
information
correctly
on
BCCH
ARFCN
GSM
cellthis
uses
number
of
GSMThe
frequency
cell.
Related
factor:
value of
groups
is more.Otherwise,
Suggestion:
The
value
this
parameter
is default
determined
this
parameter
is smaller,
the
is recommended.
by
operator's GSM
resource.
number
of
GSM
frequency
Which frequency band the
groups
is less. belongs to, the
GSM resource
value
of
parameter
is
Function:this
Starting
absolute
configured
as
the
same
radio frequency channel
value.
number of GSM cell
Function:
absolute
Related factor:
Thereselection
value of
priority
of
GERAN
this parameter
is determined
Function:
minimum
required
Related
factor:
UE
camping
by
operator's
GSM
resources.
received
power
level
of
This
parameter
is
smaller,
GERAN cell for reselectionthe
priority isfactor:
lower.Otherwise,
Related
the coverage
this
parameter
bigger,
the
of GERAN
cell is
with
absolute
priority
is
higher.
priorities
If
UEparameter
is expected
campthe
on
This
is to
bigger,
some
frequency/RAT,
the
coverage of cell is smaller
prioirty
frequency/RAT
and UEofis this
harder
to camp on
can
be set
bigger. for
Function:
threshold
this cell.
Otherwise,
thiscell
reselection
a higherthe
priority
parameter istosmaller,
GERAN
coveragecell
of cell becomes
Related
factor:
difficulty
level
bigger and
UE is
easier to
to
trigger
reselection
camp on this cell, but UE
This
parameter
is system
bigger,
might
not receive
Function:
threshold
for cell
reselection
to
higher
information
correctly
on
this
reselection to a lowerpriority
priority
GERAN
cell is
cell.
GERAN
cell
harder.Otherwise,
this level
Suggestion:
Thedifficulty
default
value
Related
factor:
parameter
is
smaller,
is recommended.
to
trigger reselection
reselection
to higher
priority
This parameter
is bigger,
GERAN
cell
is
easier.
reselection to lower priority
GERAN cell is
harder.Otherwise, this
parameter is smaller,
reselection to lower priority
GERAN cell is easier.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.
Cell coverage is mainly

default value.
When system
information is
changed.

default value.
When system
information is
changed.
resources is mainly
default value.
When system
information is
changed.
resources and the
configuration of GERAN
network are considered to
When system
information is
changed.
N/A
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.
No
No
No
No
No
No
No
No
No
No
No
No
Function: indicates the

number of neighbor EUTRA
centre frequencies
Related factor: The value of
this parameter is determined
by operator's EUTRA
frequency resources and
configuration of EUTRA
network.
This parameter is bigger, the
Function:
E-UTRA
number ofdownlink
EUTRA centre
Absolute
Radio
frequencies
is Frequency
Channel
Number this
more.Otherwise,
Related
factor:
Thereselection
value
parameter
is smaller,
the of
Function:
absolute
this
parameter
is
determined
numberofofEUTRAN
EUTRA centre
priority
by
operator
resources
and
frequencies
is less.
Related
factor:
UE camping
Function:
indicates
the
network
planning.
This
parameter
is smaller,
number
of resource
blocksthe
priority
is lower.Otherwise,
over
which
the UE could
this
parameter
is bigger,
the
measure
in each
EUTRAN
priority
is
higher.
centre frequency
If
UE is expected
to camp on
Related
factor: This
some
frequency/RAT,
the
prioirty
of
this
frequency/RAT
according to operator's
can be setthreshold
bigger. for
Function:
cellthe
frequency
resources
and
reselection
to of
a higher
priority
configuration
EUTRAN
EUTRAN
network. cell
Related
factor: difficulty
This parameter
is bigger,level
the
to
trigger
reselection
EUTRAN bandwith which UE
Function:
threshold
for cell
This
parameter
can measure
is is bigger,
reselection
to
a
higher
priority
reselection
to higher
more.Otherwise,
this priority
EUTRAN
cell
Based
on
EUTRAN
is
parametercell
is smaller,
the
RSRQ
harder.Otherwise,
EUTRAN bandwiththis
is less.
Related
factor:
difficulty level
parameter
is smaller,
to
trigger reselection
reselection
to higher priority
Function:
threshold
for cell
This
parameter
bigger,
EUTRAN
cell
is is
easier.
reselection
lowerpriority
priority
reselection to
to a
higher
EUTRAN
EUTRAN cell
cell is
Related
factor: difficulty
harder.Otherwise,
this level
to
trigger
reselection
parameterthreshold
is smaller,
Function:
for cell
This
parameter
bigger,
reselection
to higher
priority
anisequal
or
reselection
to
lower
priority
EUTRAN
cell
is
easier.
lower priority EUTRAN cell
EUTRAN
is
Function:
minimum
required
Based
on cell
RSRQ
harder.Otherwise,
thisof level
received
power difficulty
level
Related factor:
parameter
is smaller,
EUTRAN
cell
for reselection
to trigger reselection
reselection
to lower
priority
Related
factor:
the
coverage
This parameter
is bigger,
EUTRAN
cell
is
easier.
of
EUTRAN
cell
with
absolute
reselection to equal or
lower
priorities
priority EUTRAN
cell is
Function:
This parameter
This
parameter
is bigger,
the
harder.Otherwise,
this
indicates
the minimum
RSRP
coverage
of
cell
is
parameter
is
smaller,
required quality of the
smaller
and
is harder
to
reselection
toUE
equal
or
lower
EUTRAN
cell
which
satisfies
camp
on
this of
cell.
Otherwise,
priority
EUTRAN
cell
is
the
condition
being
this
parameter
is smaller,
the
easier.
selected
or reselected
by UE.
RSRP
coverage
of
cell
only the measured quality of
becomes
UE is
the
cell is bigger
over and
Function:
Threshx,
high2
and
easier
to
camp
on
this
cell,
QqualminEUTRA
can the
cell
Threshx,
low2not
Configuration
but
UE
might
receive
be
selected.
Tag.
system
information
correctly
Configuration
cell
Related
factor:Rule:
Configuration
on
this
cell.
covering
radius.
Rule:
This parameter
should
Suggestion:
The value
default
If
the
parameter
is value
be
set
according
to
operator
is
recommended.
smaller, cell
reselection
network
deployment.If
criteria
is priority
easier fulfilled
, and
absolute
reselection
vice
versa.
based on RSRQ and RSRP
Adjustment
Suggestion:
need to be used
in acutalThe
default
value
is
Function:
detection
of lower
network, this parameter
will
recommended.
priority
eturan
cell
be set True.
Configuration
Rule: This The
parameter
should
default value
is be set
according
to operator network
recommended.
deployment.
resources is mainly
default value.
When system
information is
changed.
N/A
When system
information is
changed.

default value.
When system
information is
changed.
resources and the
configuration of EUTRAN
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

When system
information is
radius.
changed.

information is
network deployment.
changed.

information is
network deployment.
changed.
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Function: load balance switch

for initial RRC procedure
This parameter
indicates
Related
factor: load
Object
ID ofamong
Load Balance
distribution
carriers
Information
and scenario
If
the parameter
value isswitch
Function:
load balance
"Inter-frequency
Open",
RNC
for RAB assignment
perform load balance among
procedure
different
carriersload
and
Related factor:
handover
users
to
load
distribution among low
carriers
carrier
so
as
to
offer
better
and scenario
service
in load
the process
RRC
Function:
balance
If the parameter
value of
isswitch
connnection.
for
call
holding
procedure
"open", RNC perform load
If the parameter
value is
Related
factor:
balance
amongload
different
"closed",
it does
notcarriers
need
to
distribution
among
carriers and
handover
users
consider
load
balance
in
the
and
scenario
to low load carrier so as to
Function:
balance
process
ofservice
RRC
connnection.
If
the better
parameter
value
is
offer
service
in the
switch
for
initial
RRC
"open",
RNC
perform
load
process of RAB assignment.
procedure
balance
among different
If the parameter
value is
Related
factor:
service
carriers
handover
users
"closed",and
it does
not need
to
distribution
among
carriers
to
low load
carrier
so
as
consider
load
balance
in to
RAB
and
scenario
offer
betterservice
Qos inbalance
the
Function:
assignment.
If
the
parameter
value
isIf the
process
of
call
holding.
switch for RAB assignment
"open",
RNC
canisperform
parameter
value
"closed", it
procedure
different
services
accessing
does notfactor:
need to
consider
Related
service
into
different
carriers
(service
load balance
in callcarriers
holding
distribution
among
balance)
base
on
operator
procedure.
and
scenario
Function:
balance
request
soservice
as to value
offer
better
If
the
parameter
is
switch
for
call
holding
service.
"open", RNC can perform
procedure
If
the parameter
value
is
different
services
accessing
Related
factor:
service
"closed",
it
does
not
need
to
to
different carriers
(service
distribution
among
carriers
Function:
load
balance
switch
consider
service
balance
in
balance)
base on operator
and
scenario
for
downlink
transmitting
initial
RRC
procedure.
request
so
as
to value
offer better
If
the parameter
is
power
service.
"open", RNC
can
perform
Related
factor:
load
If
the parameter
value
is
different
services
accessing
distribution
among
carriers
"closed",
it
does
not
need
to
to
different
carriers
(service
and
reason
why load
is not
consider
service
balance
in
balance)
base on operator
balance
RAB
assignment
procedure.
request
so
as to value
offer
better
If the parameter
is
service.
Function:
weight
of
downlink
"open", RNC perform load
If
the parameter
value
is
transmitting
power
balance
based
on
downlink
"closed",
it
does
not
need
toin
Related
factor:
factor
result
power among
Function:
Deltadifferent
threshold
of
consider
service
balance
in
unbalance
carriers
and
handover
users
TCP
load
between
target
and
call
holding
procedure.
When
"DlLdBalPwrSwch"
to low
load
so as tois
source
cell carrier
opened,
theservice.
parameter
value
offer better
Related
factor:
ping-pong
is
bigger,
downlink
power
is
If
the
parameter
value
is
balance
the
key
factor
in
load
Function:
load
balance
switch
"closed",
it
does
not
need
When DlLdBalPwrSwch isto
evaluation
and
load balance
for
uplink
RTWP
consider
load
balance
based
open,
if the
parameter
value
based
onfactor:
downlink
power is
Related
load
onbigger,
downlink
transmitting
is
the
load
difference
triggered
easier.Otherwise,
distribution
among
power. target
between
andcarriers
source
the
value
is why
smaller,
not
and
reason
loaditisisnot
cell is bigger,
easier
to
trigger
load
balance
balance
load balance to neighboring
based
on downlink
power.
If
theisparameter
value
is
cell
triggered
harder;
"open",
RNC
load
otherwise,
theperform
parameter
balance
based on
RTWP
value is smaller,
load
balance
among
different
carriers
and
to neighboring
cell
easier.
Function:
weight
ofisuplink
handover
users
to
low
load
When balance is easier to be
RTWP
carrier
sofactor:
as
offer better
triggered,
Ueto
access
rate
is in
Related
factor
result
service.
easier to fall down and callunbalance
If
the rate
parameter
value
drop
is easier
to is is
When
"UlLdBalPwrSwch"
"closed",
it does
not need
to
increase.the
opened,
parameter
value
consider
balance
is bigger, load
RTWP
is the based
key
on
uplink
RTWP.
factor
in load
evaluation and
Suggestion:
Load
load balanceClosed.
based on
RTWP
balance
is
not
accurate
is triggered easier.Otherwise,
because
fluctuation
the valueof
is singal
smaller,
it is not
of RTWP
easier
to trigger load balance
based on RTWP.
Basic parameter
Cann't Modify
Load distribution among

default value.
Immediately

default value.
Immediately

default value.
Immediately
Service distribution among

default value.
Immediately

default value.
Immediately

default value.
Immediately

carriers and reason why load
Immediately
is not balance are considered
Factor resulting in unbalance
is mainly considered to
Immediately
Ping-pong balance is mainly

default value.
Immediately

Immediately
Immediately
No
Yes
No
No
Yes
No
No
Yes
No
No
No
No
and source cell

Related factor: ping-pong
balance
When UlLdBalPwrSwch is
open,
if the
parameter
Function:
load
balancevalue
switch
is
bigger,
the
load
difference
for downlink channelization
between
target and source
code resource
cell
is
bigger,
Related factor: load
load
balance
to neighboring
distribution
among
carriers
cell is
triggered
and
reason
whyharder;
load is not
otherwise,
balance the parameter
value
is smaller, value
load balance
If
the parameter
is
Function:
weight
ofisdownlink
to
neighboring
cell
easier.
"open",
RNC
perform
load
channelization
code
When
balance
to be
balance
based is
oneasier
code
Related
factor:
factor
result
Function:
Delta
threshold
triggered,
Ue
access
rate
is in
resource among different of
unbalance
code
between
target
and
easier toand
fall handover
down andusers
callcarriers
When
"LdBalCdSwch"
source
cellis carrier
drop
rate
easier so
to asisto
to
low
load
opened,
the parameter
value
Related
factor:
ping-pong
increase.
offer
better
service.
is
bigger,
code
is
the
key
balance
If
the parameter
value is and
factor
in
load evaluation
When
LdBalCdSwch
is open,
"closed",
it
does
not on
need
to
balance
based
code
ifload
the
parameter
value
consider load
balance is
based
resource
is
triggered
bigger,
load difference
on
codethe
resource.
easier.Otherwise,
the
value is
between target and
source
smaller,
it
is
not
easier
to
Function:
CS
balance
switch
cell is bigger,
trigger
load
balance
based
during
RAB
assignment
load balance to neighboringon
Function:
Delta harder;
threshold of
code
procedure
cell isresource.
triggered
HSDPA
throughput
between
Related
factor:
noise
on UE
otherwise,
the parameter
target
and
source
cell
Because
there are
noise
value
is smaller,
load
balance
Related
factor:
ping-pong
when
some
UEs
with
CS
to neighboring
cell
is easier.
balance
service
using Qualcomm
When balance
is easier to be
When
LDBALHSSWCH
chips
balance
tothreshold
otherrateisof
Function:
Delta
triggered,
Ue access
is
open,
if
the
parameter
value
carriers
during
RAB
HSUPA
throughput
between
easier to fall down and
callis
bigger,
difference
assignment,
itload
is suggested
to
target
andthe
cell
drop
rate
issource
easier
to
between
target
and
source
set
this parameter
as
Related
factor: ping-pong
increase.
cell
is bigger,
'Closed'if
there are a lot of
balance
load
balance
to neighboring
this
kind
of
UEs
in network.
When LDBALHSSWCH
is
cell is triggered
harder;value
open,
if the parameter
otherwise,
theload
parameter
Function:
load
balance
switch
is bigger, the
difference
value
is
smaller,
loadsource
balance
for
HSDPA
throughput
between
target
and
to
Related
factor: cell
loadis easier.
cellneighboring
is bigger,
When
balance
is
easier
to be
distribution
among
carriers
load balance to neighboring
triggered,
Ue
access
rate
and
reason
why
load
is
not
cell is triggered harder; is
easier to fall
down
and callbalance
otherwise,
the
parameter
drop
is easier
to balance
If
the rate
parameter
value
is "on",
value
is smaller,
load
increase.
RNC
perform load
to neighboring
cell balance
is easier.
based
on HSDPA
throughput
When balance
is easier
to be
among
different
carriers
triggered, Ue access rateand
is
handover
users
to low
load
unction:
balance
easier toload
fall
down
andSwitch
callcarrier
so is
aseasier
to offer
based
on
bandwidth
drop rate
to better
service.
Related
increase.factor: load
Function:
load
balance
If
the parameter
value
isSwitch
"off",
distribution
among
carriers
based
on
CE
resource
itand
does
not
need
to
consider
reason why load is not
load balance based on
balance
HSDPA
throughput.
If
the parameter
value is
"open",
RNC
perform
load
Function: weight of HSDPA
balance
based
on
bandwidth
throughput
among
carriers
andin
Relateddifferent
factor: factor
result
balance users to low load
unbalance
carrier
so as to offer better
When "LdBalHsSwch"
is
service.
opened,
the
parameter
value
Function:
weight value
of HSUPA
If
the
parameter
is
is
bigger,
HSDPA
throughput
throughput
"closed",
itfactor
does in
notload
need to
is
the key
Related
factor:
factor
result
consider
load
balance
basedin
evaluation and load balance
unbalance
on bandwidth.
based
on HSDPA throughput
When
"LdBalHsSwch"
Suggestion:
Closed. is
is
triggered
opened, theeasier.Otherwise,
parameter value
the
value HSUPA
is smaller,
it is not
is bigger,
throughput
easier
to
trigger
load
balance
is the key factor in load
based
on
HSDPA
throughput.
evaluation and load balance
based on HSUPA throughput
is triggered easier.Otherwise,
the value is smaller, it is not
easier to trigger load balance
based on HSUPA throughput.

default value.
Immediately

Immediately
Immediately

default value.
Immediately
Noise on UE is mainly
default value.
Immediately

default value.
Immediately

default value.
Immediately

Immediately
carriers and unbalance
between carriers are
default value.
carriers and unbalance
between carriers are
default value.
Immediately
Immediately

Immediately

Immediately
No
No
No
No
No
No
No
No
No
No
Yes
No
balance threshold of CS
service
Related factor: difficulty level
to
trigger balance
Function:
downlink available
When
LdBalCdSwch
is
channelization
code load
"open",
the
value
is
bigger,
balance threshold of R99 PS
then
CS traffic is easier
service
balanced
to other
inter- level
Related factor:
difficulty
frequency
UTRAN
cells.
to trigger balance
Function:
downlink
available
Otherwise,
the value
is
When
LdBalCdSwch
is
load
threshold
of
CS
service
smaller,
CS value
trafficisisbigger,
not
"open",
the
for
loadbalanced
balance to
betweenintereasier
then
R99cells
PS traffic other
is easier
UTRAN
frequency
UTRAN
cells.
balanced
to
other
interRelated
factor: is
difficulty level
When
balance
frequency
UTRANeasier
cells. to be
to
trigger
balance
Function:
downlink
available
triggered,
Ue
access
rate is
Otherwise,
the value
is
When
DlLdBalPwrSwch
is
load
threshold
of
CS
service
easier toR99
fall down
and
callsmaller,
PS
traffic
is
not
open,
the
value
is
bigger,
load
for
load
balance
between
drop
rate
is easier
to
easier
balanced
to
other
interbalance
for
CS
traffic
based
RAT
systems
increase.
frequency
UTRAN
cells.
on
downlink
power
is level
Related
factor:
difficulty
When
balance
is
easier
to be
triggered
easier;
.
Otherwise,
to
trigger balance
Function:
downlink
available
triggered,
Ue
access
rate
is
the value
is smaller, CS traffic
When
DlLdBalPwrSwch
is
load
threshold
of R99
easier
to fall balanced
down
andPS
callis
not
easier
to
open,
the
value
is bigger,
service
foris
load
balance
drop
rate
easier
to UTRAN
other
inter-frequency
inter-RAT
load
balance
of CS
between
UTRAN
cells
increase.
cells.
traffic
based
on
downlink
Related
factor: is
difficulty
When
balance
easier level
toRAT
be
power
to overlap/Covers
to
trigger
balance
triggered,
Ue
access
rate
is
cells isDlLdBalPwrSwch
triggered
easier. is
Function:
uplink available
When
easier
to fallthe
down
and
Otherwise,
value
is callload
threshold
of
CS
service
open,
the
value
is
bigger,
load
drop
rate
is
easier
to
smaller,
CS
traffic
is
not
for
load balance
between
balance
for
R99
PS
traffic
increase.
easier
UTRAN
based balanced.
oncells
downlink power is
When
balance
to be
Related
difficulty
level
triggeredfactor:
easier;
.easier
Otherwise,
Function:
uplinkis
available
triggered,
Ue
access
rate
is
to
trigger
balance
the value
is smaller,
PS
load
threshold
of CSR99
service
easier
to
fall
down
and
callWhen
UlLdBalPwrSwch
is
traffic
is
not
easier
balanced
for load balance between
drop
rate
is
easier
to
open,
the
value
is bigger,
load
to
other
inter-frequency
different
RAT
systems
increase.
balance
for CS difficulty
traffic based
UTRAN cells.
Related
factor:
level
on
uplink
powerisiseasier
triggered
When
balance
to be
to
trigger
balance
easier.
Otherwise,
the
value
Function:
uplink
available
triggered,
Ue access rate
When
UlLdBalPwrSwch
isis is
smaller,
CS
traffic
is
not
load
threshold
of
R99
PS
easier the
to fall
down
and callopen,
value
is bigger,
easier
balanced
to to
otherofinterservice
foris
load
balance
drop
rate
easier
inter-RAT
load
balance
CS
frequency
UTRAN
cells.
between
UTRAN
cells
increase.
traffic based on uplink power
When
balance
easier
to beis
Related
factor: is
difficulty
level
to overlap/Covers
RAT cells
triggered,
Ue
access
rate
is
to
trigger balance
triggered
easier. Otherwise,
Function:
downlink
available
easier
to
fall
down
and
callWhen
UlLdBalPwrSwch
is
the value is smaller, CS traffic
HSDPA
throughput
drop
is
easier
tothreshold
open,
the
value
is bigger,
is notrate
easier
balanced
to load
for
load
balance
between
increase.
balance
for
R99
PS
traffic
other overlap/Covers RAT
UTRAN
based
uplink power is
cells. oncells
Related
factor:
difficulty
triggered
easier.is
Otherwise,
When balance
easier level
to be
to
trigger
balance
the
value is
R99
Function:
downlink
available
triggered,
Uesmaller,
access
ratePS
is
When
is callopen,
traffic
not
balanced
HSUPA
threshold
easierisLdBalHsSwch
tothroughput
falleasier
down and
the
value
is easier
bigger,
load
to
other
inter-frequency
for
load
between
drop
ratebalance
is
to
balance
based
on
HSDPA
cells.
UTRAN
cells
increase.
throughput
is triggered
When balance
is
easiereasier.
to be
Related
factor:
difficulty
level
Otherwise,
the
value
triggered,
Ue access is
rate is
to
trigger balance
smaller,
is not
easier
Function:
CS
Handover
for
easier LdBalHsSwch
toitfall
down
and
When
is callopen,
balanced
to
other
interCS+PS
in
Multi-Carrier
drop
rate
is
easier
to
the value bigger, load
frequency
UTRAN
cells.
Scenario
increase.
balance based
on HSUPA
When
balance
is
easiereasier.
to
be
Related
factor:
call-drop
rate
throughput
is triggered
triggered,
Ue
access
rate
is
For
multi-RAB
Otherwise,
the CS+PS,
value is when
easier
toitfall
down
and
PS
is released
and
onlycallR99
smaller,
is not
easier
drop
rate
is
easier
to
CS
remains,
if
the
cell
is
balanced to other interincrease.
R5+R6+R99/R5+R99
and
frequencyUser
UTRAN
cells.
Function:
Number
Offset
only
"HS
PS
preferred"
When
balance
is
easier
of UTRAN for Balance isto be
configured,
UE
will not
be is
triggered,
Ue
access
rate
Related factor:
balance
balanced
to another
cellcalleasier to fall
down
and
tendency
when
UTRNA
which
support
R99
service
drop rate
is easier
to
neighboring
cell,
GSM
and
is
configured
as
not-only
increase. cells in Multineighboring
"HS
PS
preferred"
when
the
Mode system and common
parameter
value
is
"closed"
GSM neighboring cells exist.
Otherwise,
CS service can be
simultaneously.
balanced,
may
The
larger but
the this
value
is, impact
the
call-drop
rate
easier neighboring
cell of
UTRAN will be balanced.
Suggestion: depend on
balance tendency

balance is mainly considered Immediately









Call-drop rate is mainly

default value.
Immediately

default value.
Immediately
No
No
No
Yes
Yes
No
Yes
Yes
No
No
No
No
Function: User Number Offset

of GSM in Multi-Mode System
for Balance
Related factor: balance
tendency when UTRNA
neighboring
cell,Number
GSM Offset
Function: User
neighboring
cells in Multiof
GSM for Balance
Mode
system
common
Related
factor:and
balance
GSM
neighboring
cells
tendency when UTRNAexist
simultaneously.
neighboring cell, GSM
The
larger the
value
is, the
neighboring
cells
in Multieasier
neighboring
cell
of
Mode system and common
GSM neighboring
will be balanced.
GSM
cells exist
Suggestion:
depend
Function:
GSM
cells' on
carrier
simultaneously.
balance
tendency
number.
Related
factor: balance
easier neighboring
cell of
Function:
dual
carrier
balance
distribution
among
carriers
GSM will be
balanced.
switch
for
initial
RRC
and
scenario
Suggestion: depend on
procedure
The
greater
this parameter is,
balance
tendency
Related
cell of
DCGSM
the largerfactor:
capacity
Function:
Switch
ofdistribution
HSDPA
capability
and UE
will be triggered
and
load
Load
Balance
for
Signalling
among
balancecarriers
to GSM will be
on
DCHinitial
ineasily.
RRC
Connection
During
RRC
procedure,
triggered
Procedure
dual carrier balance function
Related
factor:
whether
HSPA
works if this
switch
is on.The
load
balance
is used during
UE with
DC capability
can be
RRC
procedure
balanced
to the cell supports
If
this
switch
isbetter
on, when
RRC
DC and
enjoy
service.
Function:
indicates
HSPA+
singnaling
is
forced
to
Dual
carrier
balance
function
capability
establish
on DCH
and
the is
does
notfactor:
work
ifHSPA+
this
switch
Related
initial
is classed
as "
off. service
capability
which
cell could
PS
service" and UE protocol
support
Function:
capability
version
is HSPA+
R5 or indicates
later,
RNC
This
parameter
what
balance
switch
for
RAB
could
balance
user
based
on
HSPA+
capability
are
assignment
procedure
HSDPA
load
balance
strategy,
included
and each
bit
Related
factor:
cell
HSPA+
otherwise,
RNC
could
corresponds
toUE
one
HSPA+
capability
and
distribution
balance user
based
on R99
capability.
If new
HSPA+
among
carriers
Function:
HSPA+
capability
load
balance
strategy.
capability
is
added,
new
bit is
Each
switch
hasfor
a call holding
balance
switch
used.
corresponding
HSPA+
procedure
This
parameter
isswitch
not is
capability.
If
one
Related
factor:
cell
HSPA+
suggested
to
be
adjusted.
"on", its corresponding
capability
and UE distribution
HSPA+
capability
balance
Function:
priority of
each
among carriers
works
during
RAB
HSPA+
capability
Each switch
has a
assignment
procedure.
Related
factor:
importance
corresponding
HSPA+
Otherwise,
its
capability
order
of
each
HSPA+
capability. If one switch is
balance
does not work during
capability
"on", its corresponding
RAB assignment
Each
bitcapability
indicatesprocedure.
the priority
HSPA+
balance
of
the corresponding
bit of
works
during call holding
Function:
of DC
HSPAPLUSCAPIND.The
procedure.threshold
Otherwise,
its
redirection
value
is bigger,
thedoes not
capability
balance
Related
factor:
difficulty
level
corresponding
work during
callHSPA+
holdingpriority
to
trigger
redirection
is
higher;
otherwise,
the
value
procedure.
It
harderthe
to trigger
DC
is is
smaller,
corresponding
redirection
when
HSPA+ priority
is this
lower.
Function:
threshold
ofvalue
DC is
bigger;
otherwise,
it
is
easier
Suggestion:
when
one
redirection
to
trigger
DC
redirection
when
HSPA+
capability
is
more
Related factor:
difficulty level
Function:
This
parameter
this
valueredirection
isitssmaller
important,
priority
can
be
to
trigger
indicates
the Cpich
When
redirection
is RSCP
easier
to
set
bigger.
It
is
harder
to
trigger
DC
threshold
for blind
handover
be
triggered,
Ue
access
rate
redirection
when
this value
is
in
procedure
ofdown
directed
retry
is
easier
to fall
and
bigger;
otherwise,
it
is
easier
triggered
by inter-RAT
waiting-time
to
access when
to
trigger DC
redirection
balancing.
If reported
Cpich
increases.
this value
is smaller
Rscp
of source
cell is less
When
than orredirection
equal to is easier to
be
triggered,
Ue access
DRRscpQualThrd
, blindrate
is
easier
to
fall
down
handover will not be and
waiting-time
triggered. to access
increases.
user experience and network
feature
When inter-RAT balancing , if
this parameter is small , UE
will blind handover more
easily and may drop the call.

default value.
Immediately

default value.
Immediately

default value.
Immediately
Cell DC capability and UE

distribution among carriers
Immediately
are considered to define this
default value.
Whether HSPA load balance
is used during RRC
Immediately
procedure is considered to
Cell HSPA+ capability is
mainly considered to define
this default value.
Immediately
Cell HSPA+ capability and

UE distribution among
carriers are considered to
Immediately

UE distribution among
carriers are considered to
Immediately

importance order of each
HSPA+ capability are
default value.
Immediately

DC redirection is mainly
default value.
Immediately

DC redirection is mainly
default value.
Immediately

At Next Use
No
Yes
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
Yes
threshold for blind handover

in procedure of directed retry
triggered by inter-RAT
balancing. If reported Cpich
EcNo of source cell is less
than or equal to
DREcNoQualThrd
, blind
Function: code factor
handover
will
not
be
considered in HSDPA
triggered.
throughput
Parameter
controlling
factor:
Related
factor:
factor in
user
experience
and network
HSDPA
throughput
feature
Code
factor
needfactor
to be
Function:
power
When
inter-RAT
balancing , if
considered
in
HSDPA
considered
in HSDPA
this
parameter
is small ,When
UE
throughput
calculation.
throughput
will
blind
handover
more
Bit is 0, the
factor
is not
Related
factor:
factor
in call.
easily and
may
drop the
considered
in HSDPA
HSDPA
throughput
Oherwise
, the
UE will blind
throughput
calculation.
Power
factor
need tofactor
beWhen
Function:
bandwidth
handover
hard.
Bit
is
1,
the
factor
needs
to be
considered
in
HSDPA
considered
in
HSDPA
considered
in
HSDPA
throughput
calculation. When
throughput
throughput
calculation
Bit is 0, the
factor
is not
Related
factor:
factor
in
considered
in HSDPA
Function:
load
balance switch
HSDPA throughput
throughput
calculation.
When
for
HSUPA factor
throughput
Bandwidth
need to
be
Bit
is
1,
the
factor
needs
Related
factor:
load
considered in HSDPA to be
considered
in HSDPA
distribution
among
carriers
throughput calculation.
When
throughput
calculation
and
reason
why
load
is not
Bit is 0, the factor is not
balance
considered in HSDPA
If
the parameter
value isWhen
"on",
throughput
calculation.
RNC
load
balance
Bit is perform
1, the
factor
needs
to be
Function:
load
balance
based
onofHSUPA
throughput
considered
in HSDPA
strategy
HSPA
among
different
carriers
throughput
calculation
Related
factor:
cell
load and
handover
users
to
low
when the value of this load
carrier
so as
offer better
parameter
is to
"Multi-Factors
service.
Combination
the
Function:
loadStrategy",
balance
If
the parameter
value
isswitch
"off",
balance
based
on
HSPA
for
HSDPA
user
number
itthroughput
does not need
to
consider
is used.
When
the
Related
factor:
HSDPA
load
balance
based
on user
value
of
this
parameter
is
distribution
among carriers
HSUPA
throughput.
"HSDPA
User Number
If
the
parameter
value
"on",
Function:
HSDPA
user is
Strategy",
the load
balance
based
RNC perform
balance
number
threshold
for
load
on
HSDPA
user number
based
onbetween
HSDPA
user is
balance
UTRAN
Function:
Delta
threshold
used.
number
among different of
cells
HSDPA
user
nember between
carriers.
Related
factor:
HSDPA
target
and
source
cell isuser
If
the parameter value
"off",
number
Related
factor:
ping-pong
itIf does
not
need
to
consider
the HSDPA user number of
balance
load
balance
based
on or
local
UTRAN
cell is equal
When
LdBalHsdNumSwch
is
HSDPA
user
number.
greater
the value value
open, if than
the parameter
indicated
by this
parameter,
is bigger, the
difference
of
the
downlink
load
balance
HSDPA
user
nember
between
Function:
this
parameter
judgment
issource
performed
and
target andbalance
cell isfrom
indicates
type
UE
in
local
cell
may
be
bigger,
balance
to
UTRAN
totoEUTRAN
balanced
other
neighboring
cell is UTRAN
triggered
Factor:
requirements
of
Function:
load
balance
cell.
harder;
otherwise,
the switch
operator
for
Handover
andisCall
parameter
smaller,
During
the value
early age
of
Reestablishment
Procedure
load
balance
to
neighboring
EUTRANfactor:
network,
since UE
Related
load
cell
is easier.
supported
EUTRAN
is lack
distribution
among
carriers
When
balance
is easier
to be
and
load
of
EUTRAN
is light,
and
scenario
triggered,
Ue
access
rate
service
balance
beis is
Function:
servicecan
balance
If
the parameter
value
easier
to
fall
down
and
callapplied.
During
middle
and
switch
for
Handover
and
Call
"open",
RNC
perform
load
drop
rate
is
easier
to
late age among
of EUTRA
network,
Reestablishment
Procedure
balance
different
increase.
since
UEand
becomes
more
and
Related
factor:
service
carriers
handover
users
load
of
EUTRAN
increas,
distribution
amongso
carriers
to low load carrier
as to
load
balance
caninbe
and
offerscenario
better Qos
theapplied.
If
the parameter
valueand
is call
process
of handover
"open",
RNC
can
perform
Reestablishment. If the
different
services
parameter
value isaccessing
"closed", it
to
different
carriers
(service
does
not need
to consider
balance)
baseinon
operatorand
load balance
handover
request
so as to offer better
call reestablishment
service.
procedure.
"closed", it does not need to
consider service balance in
handover and call

At Next Use
Factor in HSDPA throughput

default value.
Immediately

default value.
Immediately

default value.
Immediately

Immediately
Cell load is considered to

Immediately
HSDPA user distribution

among carriers is considered Immediately
HSDPA user number is

default value.
Immediately

default value.
Immediately
The requirement of operator

default value.
Immediately

default value.
Immediately

default value.
Immediately
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
switch for Handover and Call

Related factor: service
distribution among carriers
and scenario
Function:
PS+CSvalue
balance
If the parameter
is
switch
"open", RNC can perform
Related
call-drop
rate
different factor:
services
accessing
UE
has
PS
and
initials
CS
to different carriers (serviceas
the
second
RAB
a cell
balance)
base
onon
operator
which
does
nottocontain
CS
request
so as
offer better
preferred.
service. If current cell has
an
overlap/contained-in
If the
parameter value is
neighboring
cell which
contain
"closed", it does
not need
to
CS
preferred
and
this
switch
consider HSPA+ balance in
is
"on", theand
multi-RAB
is
handover
call
balanced
to the neighboring
reestablishment
procedure.
cell but the hard-handover
Parameter
function:
network
This
parameter
indicates
MO
impacts
call-drop
rate.
When
object
ID.
this parameter
is "off",
parameter.
PS+CS will the
not measurement
be balanced
type
in
the
MR
function.
and stay on current
cell.
the measurement
report
Parameter
function:
network
acquisition
requirement
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
type in the MR function.
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind
of
SonyEricsson
the measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind of SonyEricsson
the
measurement
report
Parameter
network
UE
will shutfunction:
down when
this
acquisition
requirement
measurement
is
started.
Especially
Bit2-period
parameter.note:
the measurement
quality
measurement
usually
turns
off,
since
it
is
found
that
some
kind of SonyEricsson
the
measurement
report
UE
will shutrequirement
down when this
acquisition
measurement
is Bit2-period
started.
Especially note:
quality measurement usually
turns off, since it is found that
some kind of SonyEricsson
UE will shut down when this
measurement is started.

default value.
Immediately
Call-drop rate is mainly

default value.
Immediately
Basic index
can not be
modified
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
Yes
parameter. the measurement
the measurement report
acquisition requirement
Especially note: Bit2-period
Parameter
function: network
quality measurement
usually
turns off, since it is found that
parameter.
theSonyEricsson
measurement
some kind of
type
in the
function.
UE will
shutMR
down
when this
Parameter
controlling
factor:
measurement
is
started.
If
Parameter
function:
network
the
measurement
report
bit2
is
turned
on,
these
Parameter
function:
network
acquisition
requirement
exception
Ues
bethe
parameter.
the should
period
of
Especially
note:
Bit2-period
configured
in
the
IMEI
parameter.
the
measurement
non-location
measurement
quality
measurement
blacklist
to
forbid
bler usually
type
inin
the
MR
function.
report
the
MR
function.
turns
off,
since
it
is
found
that
measurement.
Parameter
controlling
factor:
Parameter
controlling
factor:
some
kind
of
SonyEricsson
the measurement
report
report
system
UE willprecision,
shutrequirement
downRNC
when
this
acquisition
performance.
measurement
is Bit2-period
started.
Especially
note:
The smaller value means the
quality
measurement
usually
collected
measurement
turns
off,
since
it
is
found
that
reports are function:
more denser
and
Parameter
network
some
kind
of
SonyEricsson
accurate, but the RAN and
UE
will shutthe
down
when
UE
performance
drop
is this
parameter.
period
of
the
measurement
is started.
Parameter
function:
thereport
RLC
heavier. measurement
location
mode
of the
Uu measurement
The
value
means the
in
thelarger
MR
function.
report.
influence ofcontrolling
the MR function
Parameter
factor:
controlling
factor:
Parameter
function:
network
to the RAN
and UERNC
location
precision,
RNC
system
performance.
performance
is
lighter,
system performance. but it
Generally,
value
is
set
to
parameter.
the
CPU
overload
decreases
the
precision
ofthe
The smallerthe
value
means
1
(: collected
Unacknowledged
Mode
threshold
of the
MR function.
the
measurement
collected
measurement
RLC)
toare
decrease
the factor:
Parameter
controlling
reports.
reports
more denser
and
influence
to
the
Uu
interface
RNC
Note: system
In V311
version,
accurate,
but performance,
the
RAN
and
performance.
the
data size of =the
deltamr_BHCA
( 6MR.
+ is
UE
performance
drop
The
larger
parameter
value
rounddown
(average-callheavier.
means
the
higher
CPU
time/MR-period)
)
*0.02*RAB.
The
larger value
means
the
Parameter
function:
Specifies
overload
threshold,
the
later
influence
of
the
MR
function
the
MR-UE
locationsending
Parameter
function:
RLC
the
RNC
stopping
out
to
the
RAN
andmode
UE the
measurement
for
the
mode
of
the
Uu
measurement
the
MR data, is
and
the larger
performance
lighter,
but
it
MR
function.
report
in size,
thethe
RRC
connection
the
data
but
the
decreases
precision
of
Parameter
controlling
factor:
phase.
influence
to
the
RNC
system
the
collected
measurement
location
precision,
location
Parameter
controlling
factor:
function:
Specifies
performance
is more
heavily.
reports.
expense.
RNC
system
performance.
the
MR-UE
location
The
smaller
parameter
value
Note:
V311
version,
If
"RTTInthe
preferred",
then
the
Generally,
the
value
is
measurement
mode
forset
theto
means
lower
CPU
deltamr_BHCA
=
(
6
+
RTT
mode
is chosen
1
(:
Unacknowledged
Mode
MR
function.
overload
threshold
and
the
rounddown
(average-calldefinitely.
RNC
sends
RTT
RLC)
toinfluence
decrease
the
Parameter
controlling
lighter
of
thefactor:
data
time/MR-period)
) *0.02*RAB.
dedicated
measurement
influence
toofthe
interface
location
precision,
location
acquisition
theUu
MR
function
control
in Iub
interface and
performance.
expense.
to the RNC
system
UE
Rx-Tx
time
difference
type
It
is
found
in
the
field
tests
If
"RTT preferred",
then
the
performance,
but
the
RNC
1
in
Uu
interface.
The
location
that
the
value
with
1
(:
RTT
mode
is
chosen
thus stops sending out the
precision
may
not
be
Unacknowledged
Mode
RLC)
definitely.
RNCand
sends
RTT
MR data later
thehigher,
data
but
the
influence
on
Uuthe
does
influence
on
dedicated
measurement
size isless
smaller.
interface
performance
system in
performance.
control
Iub interface is
and
lower.
UE Rx-Tx time difference type
If
"AGPS
preferred",
the
1 in
Uu interface.
Thethen
location
Uu
interface
precision
mayUEB
not AGPS
be higher,
measurement
canonbeUu
chosen
but the influence
only
when
the
AGPS
interface
performance
is
Parameter
condition
isfunction:
satisfied.Specifies
The
lower.
AMR
bler event (5A)
location
is higher,
If "AGPSprecision
preferred",
then the
measurement
switch.
but interface
the influence
on
Uu
Uu
UEB
AGPS
Parameter
controlling
factor:
Parameter
function:
interface
performance
is also
measurement
can beSpecifies
chosen
network
bler
event
measurement
total
higher,
and
may
influnence
only
when the AGPS
CRC
number.
the
call
setup
success
ratio
condition
is satisfied. The in
parameter
Parameter
controlling
factor:
the
initial
call
phase.
location precision
is higher,
event
report
accuracy
but the influence on Uuand
promptness.
interface performance is also
Larger
value
higher, parameter
and may influnence
means
more
sampling
data in
is
the call setup success ratio
analized,
it
helps
to
increase
the initial call phase.
the report accuracy, but may
postpone 5A event report.
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users

measurement report
precision and the RNC
system
performance.
According
to the field test,
the default value is set to 0
(Acknowledged Mode RLC)
to decrease the UM message
influence on the Uu interface
performance.
At Commit/New
users
At Commit/New
users

location precision and the
RNC system performance.
At Commit/New
users

and the data size of the MR.
At Commit/New
users

Uu interface performance. It
is on when there is
requirement.
location precision and
location measurement
expense.
location precision and
location measurement
expense.
At Commit/New
users
At Commit/New
users
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Parameter function: Specifies

bler event measurement error
CRC number.
event report accuracy and
Parameter
function: Specifies
promptness.
bler
event
measurement
Larger
parameter
value
pending
aftersampling
trigger CRC
means more
data is
number.
analized, it helps to increase
Parameter
controllingbut
factor:
the report accuracy,
may
event
report
accuracy
and
postpone 5A event report.
promptness.
Larger parameter value
Parameter
function:
Specifies
means more
sampling
data is
non-AMR
event
(5A)
analized, itbler
helps
to increase
measurement
switch.but may
Parameter
controlling
factor:
postpone 5A
event report.
Parameter
function:
Specifies
network
bler event measurement total
CRC number.
parameter
event report accuracy and
promptness.
Parameter function: Specifies
Larger
parameter
value error
bler event
measurement
means
more
sampling
data is
CRC number.
analized,
it
helps
to
increase
the
report
accuracy,
but
may
event
report
accuracy
and
postpone
5A
event report.
Parameter
function:
Specifies
promptness.
bler
event
measurement
Larger
parameter
value
pending
aftersampling
trigger CRC
means more
data is
number.
analized, it helps to increase
Parameter
controllingbut
factor:
may
event
report
accuracy
and
postpone
5A
event
report.
Parameter
function: network
promptness.
Larger parameter
value
Parameter
function:
network
parameter.
the
MR-UE
means
more
sampling
data is
acquisition
ratio
for
the
MR
analized,
it
helps
to
increase
parameter.
It indicates the
function.
the
report
accuracy,
butinmay
switch
of EMI
function
MR
Parameter
controlling
factor:
Parameter
function:
network
postpone
5A
event
report.
Parameter
controlling
factor:
RNC system performance,
the data
measurement
the
size
ofMR-UE
thereport
MR.
parameter.
the
acquisition
requirement
The
larger
parameter
acquisition ratio for thevalue
MR
means
the higher acquisition
function.
ratio
and the
larger thefactor:
data
Parameter
controlling
size,
but
the
influence
to
the
RNCdata
system
the
size performance
of the MR. is
more
heavily.
The larger
parameter value
The
smaller
parameter
value
Parameter
network
means the function:
higher
acquisition
means
the
lower
acquisition
ratio and the larger the data
ratio
the
lighter
influence
parameter.
The
service
size, and
but the
influence
totype
the
of
the
data
acquisition
of the
which
needs
the
MR
function.
is
MR function
to the RNC
Parameter
controlling
factor:
more
heavily.
system
performance,
but
the
RNC
system
performance,
The
smaller
parameter
value
Parameter
function:
network
MR
data
later
and
the
data
the
datathe
size
of the
MR.
means
lower
acquisition
size
smaller.
Since
the
larger
partinfluence
calls
in
ratio is
and
the
lighter
parameter.
The
service
type
the
network
is
the
signal
CS
of the data
acquisition
of the
which
needs
the MR function.
calls,
the parameter
value
is
MR function
to the RNC
Parameter
controlling
factor:
set
0
(only
CS)
for
decreasing
system
performance,
but
the
RNC
system
performance,
Parameter
function:
network
the data
influence
on
the
system
MR
data size
laterof
and
the
data
the
the
MR.
performance
and
acquiring
size
is
smaller.
Since
the
larger
part
calls
in
parameter.
Theas
service
type
more
MR data
much
as
the
network
is
the
signal
CS
which
needs the MR function.
possible.
calls,
the parameter
is
Parameter
controllingvalue
factor:
set
0
(only
CS)
for
decreasing
the data
influence
onthe
theMR.
system
the
size of
performance
andpart
acquiring
Since the larger
calls in
more
MR data
as much
the network
is the
signalas
CS
possible.
calls, the parameter value is
set 0 (only CS) for decreasing
the influence on the system
performance and acquiring
more MR data as much as
possible.
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
N/A
At Commit/New
users
the network does not need

take effect when
this function and switch on
the new voice
this function will increase the
service set up
load of CPU
At Commit/New
users

At Commit/New
users

At Commit/New
users

At Commit/New
users

At Commit/New
users
No
This parameter indicates MO

Basic index
object ID.
can not be
modified
Yes

parameter. the switch of the
MR function.
function on or off.
At next use
N/A
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
Yes

current SW version.
not used parameter
cann't modify
No

not used parameter
current SW version.
cann't modify
No
NO
NO
NO
NO
NO
No
No
No
No
No
No
Basic
indexfunction: The
Parameter
parameter indicates signal
service type that need config
CFN offset value.
signal service
type include:
Parameter
function:
The
3.4k,
13.6k,indicates
27.2k whether
Parameter
The
larger
the rate
of issignal
the CFN
offset
value
is,
the
smaller
the
CFN
offset
applied to fast reconfiguration
value
is.
scene.
Parameter
function:
The
The
the rate
oftosignal
If thesmaller
parameter
is set
parameter
indicates
that
data
is, the bigger
theoffset
CFN
offset
TRUE,
the
CFN
value
retransmission
rate
factor
value
of
fastis.
reconfiguration
scene
corresponding
CFN offset
is
set
by
OMCR.
value over Uu interface.
If
the parameter
is set factor:
to
Parameter
controlling
FALSE,
the
CFN
offset
Parameter
function:
The
retransmission conditionvalue
of
of fast Uu
reconfiguration
scene
parameter
indicates that
actual
interface.
is
setlarger
bylength
RNC.
packet
The
theregion
parameter is,
corresponding
CFN offset
offset
the bigger the CFN
value
over
Uu
interface.
value is.
Parameter
factor:
The smallercontrolling
the parameter
is,
Parameter
function:
The
CFN
offset
value
the
smaller
the
CFN
offset
parameter indicates CFN
The
the CFN offset
value
is.
offsetlarger
value.
value is, thecontrolling
longer thefactor:
packet
Parameter
length
Uuregion
interface is.
packet over
length
The
smaller theCFN
CFNoffset
offset
corresponding
value
is,
the
shorter
the
value over Uu interface.
packet
length
The larger
theover
CFNUu
offset
interface
is.
value is, the longer the packet
length
over
Uu interface
is.
Function:
which
service
Function:
service
handover
The
smaller
the
CFN
offset
handovercontrolled
strategy will
be or
strategy
by RNC
value
is, multi-RAB
the shorter
the
used
for
This parameter
indicates
CN
packet
length
over
Configuration
Rule:
Object ID
of service
handover
Configuration
Rule:Uu
service
interface
is.
This
parameter
sets value
planning
based
on servicesets as "0" ,
If
the parameter
Function:
service handover
requirement.
RNC willcontrolled
ignore "service
strategy
by RNC or
For example,
therequested
service
handover"
IE in
CN
handover
of a service is
RAB,
and value
perform
Configuration
Rule:strategy
service
"should
be
performed"
and
according
to the value of
planning
another
is
"should
not
be
AmrServHoStra/CS64ServHo
If
the parameter
as "0" ,
Function:
service
handover
performed",
if thesets
parameter
Stra/PsRtServHoStra/PsNrtS
RNC
will
ignore
"service
strategy
controlled
by
sets
as "0", then RNC RNC
will or
ervHoStra;
handover"
IE inon
requested
CN
perform
based
the
value
If
the parameter
sets as "1"
RAB,
and
Configuration
Rule:strategy
service
"should
beperform
performed"
in
and
"service
handover"
according
to the value ofis not
planning
multi-RAB.
included
in requested RAB,
If
the will
parameter
sets
as "0" ,
Function:
service
handover
RNC
also
perform
RNC
will
ignore
"service
strategy
controlled
by
corresponding
serviceRNC or
ervHoStra;
handover"
IE in requested
CN
handover
strategy
according
If
the parameter
sets
as "1"
RAB,
and
perform
strategy
Configuration
Rule:
service
to
the
value
of
and
"service
handover"
according
to the value ofis not
planning
included
in
requested RAB,
If
the will
parameter
sets as "0" ,
RNC
also
perform
RNC
will
ignore
"service
ervHoStra,
otherwise
corresponding serviceRNC
ervHoStra;
handover"
IEstrategy
in requested
will perform
based on
handover
strategy
according
If
the
parameter
sets
as "1"
RAB,
and
perform
strategy
the
value
of
"service
to
the
value
of
and
"service
handover"
according
to
value ofis not
handover"
IEthe
in requested
included
in
requested
RAB,
RAB.
RNC
will
also
perform
ervHoStra,
otherwise
corresponding
serviceRNC
ervHoStra;
will perform
strategy
based on
handover
strategy
according
If
the
parameter
sets
as "1"
the
value
of of
"service
to
the
value
and
"service
handover"
is not
handover"
IE in requested
included
in
requested
RAB,
RAB.
RNC will also perform
ervHoStra,
otherwise
corresponding
serviceRNC
will perform
strategy
based on
handover
strategy
according
the
value
of of
"service
to the
value
handover"
IE in requested
RAB.
Basic index
New users
3.4k is normal signal type.
New connection
The fast reconfiguration

scene is unusual.
New connection
The parameter should set by

New connection
the actual Uu interface.
set by the rate of the signal,
the time of RNC and UE and
New connection
NODEB dealing with the
procedure, delay in Iub
interface,
delay
in is
Uumainly
The default
value
interface.
set by the rate of the signal,
the time of RNC and UE and
New connection
NODEB dealing with the
procedure, delay in Iub
interface, delay in Uu
interface.
Basic parameter
Cann't Modify

At next use
deployment.

Immediately
planning.

Immediately
planning.

Immediately
planning.

Immediately
planning.
No
No
No
No
N/A
No
No
No
No
No
No
No
Function: AMR service

handover strategy
Configuration Rule: service
planning
If service is not expected to
handover to GSM, the value
is "shall not be perfromed";
else
if service
is service
expected to
Function:
CS64
handover
to
GSM
handover strategy as soon as
possible,
the value
"should
Configuration
Rule:isservice
be
performed",
otherwise,
planning PS RT service the
Function:
value is "should
not be
Because
GSM
doesn't
handover
strategy
performed".
support
CS64,
if
CSservice
64 can't
Configuration Rule:
fall
back
CS12.2,
this
planning
parameter
be set to
If service isshould
not expected
"shall
not
be
performed"
.
handover PS
to GSM,
the value
Function:
NRT service
is
"shall
not
be
perfromed";
handover strategy
else
if service Rule:
is expected
Configuration
serviceto
handover
to
GSM
as
soon as
planning
possible,
the
value
is
"should
If service is not expected
to
be
performed",
otherwise,
the
handover to GSM, the value
value
is "should
not be
is
"shall
not be perfromed";
performed".
else if service is expected to
handover to GSM as soon as
possible, the value is "should
be performed", otherwise, the
value
"should not be
Basic is
index
performed".
Application Service Type for
the Qos parameter setting.
The parameter have only one
value (QChat) , adding which
This
parameter
indicates
the
is only
for adding
new similar
Traffic
Class
for
the
Qchat
service easily.
Function
of this isparameter:
Qos
parameter.
For
The parameter
setQchat
to the
This
parameter
indicates
the
can
setup on
different
Traffic
Application
Service
Type
and
ARP
Priority
Level,
used
for
Class
(Interactive or
is not adjustable
identifying
Application
Service
Background)
, so the Qchat
Type
by matching
with RAB
Qos parameter
should
be set
Parameters
according to Traffic Class.
Function
of thisthe
Related
factor:
ARP
The parameter
isparameter:
set
to the
This
parameter
indicates
the
Priority
level
of
the
application
traffic class of the Application
ARP
Preemption
service.
The is
larger
of the ARP
Service
and
notCapability,
adjustable.
used
forLevel,
identifying
Priority
the larger
Application
Type
by
probability ofService
resource
getting
matching
with
RAB
when
resource
Parameters.
congestion.The
less of thethe
Related
factor:
theVulnerability,
ARP
Priority
Level,
the less
ARP
Preemption
Preemption
the
probability
ofCapability
resource of
getting
used
for identifying
application
service.
when resource
congestion.
Application
Service
Type by
When
congestion,
{Notes:resource
highest
(1)
, .., lowest
matching
with RAB
the
service
with ARP
(14)
, no priority
(15) }
Parameters
Function
of this
parameter:
Preemption
Capability
can
Related
factor: The
ARP
This
parameter
indicates
the
preempt
the Vulnerability
resource
of of
Preemption
ARP
Queuing
Allowed
service
with ARP
Preemption
the
application
service.
capability,
used
for
identifying
Vulnerability
and
less
ARP
When
resource
congestion
Application
Service
Type by
Priority
Level.
happens,
the service
matching with
RAB with
ARP Preemption
Vulnerability
Function
of this parameter:
Parameters
can
be
preempted
by
the the
This
parameter
indicates
Related
factor: the
ARP
service
with
ARP
Preemption
Basic
Priority
of the
service of
Queuing
Allowed
capability
capability
and larger
ARP
Related
factor:
the Basic
the application
service.
Level.
Priority
of
the
service
When resource congestion,
The
larger value
of the
the service
with ARP
Queuing
parameter,
the larger
Allowed capability
can be
probability
that theservice
serviceis
Queued whenthe
use
CACresource
rejected.when resource
congested; The less
probability of the parameter,
the less probability that the
service use resource when
resource congested

At next use
planning.

At next use
planning.

At next use
planning.

At next use
planning.
Basic index
Cann't Modify
The parameter is set to the

New Chat Traffic
Application Service Type and
Setup
is not adjustable
The parameter is set to the

New Chat Traffic
traffic class of the Application
Setup
Service and is not adjustable.
it's set to the ARP Priority

level of the application
service
New Chat Traffic

Setup
it should be according to the

ARP Preemption Capability
of the application service
New Chat Traffic

Setup

New Chat Traffic
ARP Preemption Vulnerability
Setup
of the application service
ARP Queuing Allowed
capability of the application
service
New Chat Traffic

Setup

Basic Priority requirement of
the service.
New Chat Traffic

Setup
No
No
No
No
No
No
No
No
No
No
No
No
Maximum SDU size of the

service: It needs to consider
the header consumption and
the quality of service.
The value of the parameter is
Function
this parameter:
larger, theofheader
This
parameter
indicatesand
theit
consumption is smaller,
Uplink
Guaranteed
save resourcee;
butBit
it isRate of
the
service
easier
to result in PDU
Related
factor:
the minimal
transmission
mistake
when bit
rate
requirement
of
the
the radio of
channel
quality
Function
this parameter:
service;
the
resource
use the
rate
becomes
bad.
This
parameter
indicates
The
larger
value
of
the
The valueGuaranteed
of the parameter
Downlink
Bit is
parameter,
better Qos of
smaller,
thethe
header
Rate of the
service
the
service
and
theminimal
less
consumption
is the
larger,
and it's
Related
factor:
bit
resource
rateofwhen
a waste
ofuse
resourcee.
rate
requirement
the
resource
congested;
service; the
resource The
use less
rate
value
of
the
parameter,
The larger value of the the
worse
Qos of
service
parameter,
thethe
better
Qosand
of
the
better
resource
use
the service and the less rate
when resource
congested.
resource
use rate
when
resource congested; The less
Function:
This
parameter
This
is an object
valueparameter
of the
parameter,
the
indicates
the
DRX
Cycle
identity.
It
is
unique
underfor
its
worse Qos of the service
and
QChat
UE.
parent
object
the better resource use rate
Related
Factor:congested.
the Paging
when resource
delay and the capactiy of
Function:
This parameter
PCH channel
indicates
DSCP the
Value for
The valuethe
is larger,
QChat
UE.
paging delay is larger, the
Function:
QChat
Dormancy
Related
Factor:
more capactiy
oftransport
PCH
Timer
delay,
service
priority
channel
is need
Configuration
Rule: the
Itthe
needs
The
Qchat
The value
value is
is larger,
smaller,
to
consider
the
user
media
is higher,
pagingData
delaypriority
is smaller,
the
experiences
theis channel
the
delay
smaller,
lesstransport
capactiyand
of PCH
utilization
ratio
radio
more
impact
to of
the
other
is need
resource.
service media data
The
this parameter
is
The value
value of
is smaller,
the
larger,
it
will
be
more
difficult
Qchat media Data priority is
Function:
This
parameter
to
trigger
Qchat
UE
from
Lower,
thethe
transport
delay
is
indicates
the
Maximum
Cell_DCH
other to
RRC
state,
larger, lesstoimpact
theof
QChat
UEinfluence
at DMP
and
it service
will
other
mediathe
data
Function:
This
Related
Capacity
utilizationFactor:
ratio parameter
ofThe
radio
indicates
of
QChat the
UE Maximum of
resource;
released
when the
The
is
the
The value
valueQChat
of larger,
thisUE
parameter
is
QChat
Capacity
reach
limit,
Capacity
of
QChat
UE
isto
smaller,
it
will
be
easier
Parameter
Function:
This
these
released
ue
is of
in
PCH
higher,
theQchat
Capacity
nontriggerthe
UE
from
parameter
indicates
whether
state
QChat
UE
is
Lower
Cell_DCH
to other
RRC state,
to
configure
postRelated
Factor:
The
Capacity
The
value
is the
smaller,
the
but
it
will
influence
the
user
verification
period
or
not
of
QChat
UE,
user
experience
Capacity
of QChat UE
is for
experience.
Qchat
service.
The
value
larger, the
Lower,
the is
Capacity
of nonConfiguration
Rule:
needs
release
QChat
UE isItmore,
QChat
UE
is
higher
Parameter
Function:
This
to
consider
the
service
quality
the probality of successive
parameter
indicates
the SRB
and
time
delay.
Qchat
congestion
is lower,
delay
formeans
Qchatthat
service.
FALSE
a postuser experience
is worse
Configuration
Rule:
The
value
verification
shall
be
The value isperiod
smaller,
thenot
of
this
parameter
should
used.
In
this
case,
the
UE
Parameter
Function:
release QChat
UE is This
less, the
ensure
DPDCH
is
shall
notthe
transmit
onpower
theQchat
parameter
the
probality
ofindicates
successive
change
to
a
suitable
level
activated
uplink
frequency
DPCH
power
control
congestion is highrt, user
before
sending
RB0~RB4
until
higher
layers
consider
preamble
length
for
Qchat
experience
is better
message.
And
it
needschannel
to
the downlink physical
service.
consider
the
time
delay
established,
so
the
service
Configuration Rule: Theof
value
RB0~RB4
message.
quality
is better.
of this parameter
should
If
this parameter
is too
small,
TRUE
indicates
that
a postensure
the DPDCH
power
is
itsuitable
might begin
to
send
verification
period
shall beof
at the
beginning
RB0~RB4
message
at adelay
low
used,
in this
case, time
the
DPDCH
data
power,
and
it
might
make
is small.
transmission.
message
be decode
If this parameter
is too big,
mistakenly.
the DPDCH transmission is
If this
parameter
is too
big,
not
begin
while the
DPCCH
time
delay
of RB0~RB4
power
is already
in a suitable
message
would
be big.
level, it waste
power.
If this parameter is too small,
it might begin DPDCH
transmission at a low power,
The reason of the

of service.
New Chat Traffic

Setup

New Chat Traffic
the minimal downlink bit rate
Setup
requirement of the service.

New Chat Traffic
the minimal downlink bit rate
Setup
requirement of the service.
N/A
Cann't Modify
Qchat specification proposed New User
Qchat specification proposed New User
The reason of the

At next use
Allow Qchat to use 50% of

RNC Capacity
New User
experienced data
New User
When the service quality is

good enough, the time delay
New connection
should be as small as
possible.
The default value of can
make the time delay of Qhcat New connection
call as small as possible.
The default value of
dpcchPcpLenQchat and
srbDelayQchat can ensure
the DPDCH power is suitable New connection
at the beginning of the
DPDCH data transmission,
and the time delay is small.
No
No
No
No
No
No
Basic index
indicates the application
service priority class. Three
classes are defined: low
priority, medium priority and
high priority.
This
parameter
is quoted
Function:
This parameter
only.
It's
not
be
adjusted.
indicates the Basic Priority
(BP)
whichThis
is used
to map the
Function:
parameter
DPI
basic
priority.
indicates the Basic Priority
This parameter
is quoted
(BP)
which is used
to map the
here
only. priority.
It's not be
adjusted.
DPI basic
DPI
basic
priority is used in other RRM
priority mapping when DPI is
supported.
Related Factor: Application
service type priority.
The higher application service
This
parameter
is an
priority,
the higher
DPIobject
basic
identity.
priority. It is unique under its
parent object
indicates the application
service type name.
Basic index
Cann't Modify
N/A
At next use
N/A
At next use
Application service type

priority is considered to
configure this parameter.
At next use
Basic index
Cann't Modify
N/A
Cann't Modify
No

indicates the DRBC strategy
name.
DRBC strategy name
It is mainly used for
describing the DRBC strategy.
Immediately
No

father Object .
Basic parameter
can not be
modified
Basic parameter
can not be
modified
No
No
No
No

father Object .
This parameter indicates start
value of IDNNS Range
Factors of consideration: if
RNC need support Mapping
from IDNNS
to CN
Pool, this
Function
of this
parameter:
parameter
is setindicates
according
to
This parameter
End
the
real
configuration
value of IDNNS Range
RNC need support Mapping
Function
of this
parameter:
from IDNNS
to CN
Pool, this
This
parameter
CS
parameter
is setindicates
according
to
Resource
Pool Id for IMSIthe real configuration
based routing
RNC Select CN by IMSI,
Config this parameter
according the IDNNS
information

New User
not needed

New User
not needed

New User
not needed
No
No
No
No
No
No
No
No
No
No
No
No

This parameter indicates PS
Resource Pool Id for IMSIbased routing
according the IDNNS
information
father Object .
This parameter indicates The
Rule No of IMSI-MAP
Function
of this
Unique Index
forparameter:
IMSI-MAP
This parameter indicates Digit
for IMSI match
Function
of parameter
this parameter:
Config this
This
parameter
indicates
according
the Digit
which
positions of Digit for
information
IMSI match
RNC
Select
CN parameter:
by IMSI,
Function
of this
Config
this
parameter
This parameter indicates CS
according
the position
Resource Pool
Id for IMSIinformation
based routing
RNC
Select
CN parameter:
by IMSI,
Function
of this
Config
this
parameter
This parameter indicates PS
according
the IMSI
Resource Pool
Id for IMSIinformation
based routing
according the IMSI
information
Basic index
indicates the Ue state.
Configuration Rule: RNC
configures the balcklist of non
cell-Dch State for cell
selection/reselection and the
balcklist of cell-Dch State for
handover
according with
Function: frequency
bandthis
of
parameter.
EUTRAN
Function:
downlink E-UTRA
deployment.
Channel Number
by
operator
and
Function:
theresources
number of
network
planning.
eutran nbr blacklist per Freq .
Maximum is 16.
by operator resources and
network planning.

New User
not needed
Basic parameter
can not be
modified

New User
not needed

New User
not needed

New User
not needed

New User
not needed

New User
not needed
Basic index
Cann't Modify
N/A
Next
measurement
control

New connection
network deployment.
N/A
Next
measurement
control
N/A
Next
measurement
control
No

Network planned
N/A
Next
measurement
control
No

Object ID of IMEI black list
Information
Basic parameter
Cann't Modify
According to the length of

IMEI
Immediately
According to the IMEI
Immediately
No
No
Yes
Yes
No
No
No
No
No
No

length of IMEI in the blacklist
(excluded the last digit Check
Digit)parameter
.
The
indicates the
IMEI in blacklist. The value of
each bit is one number from 0
Parameter
specifies
to 9. When function:
ImeiDigit[14]
is
the
IMEI
using
case
in the
fully filled, the 14 higher
digits
IMEI
blacklist
function.
of IMEI
are filled.
The last
Parameter
controlling
factor:
digit is check
digit which
is not
whether
the IMEI shall be
filled in ImeiDigit[14].
forbidden infunction:
specifiedspecifies
using
Parameter
case.
the IMEI using case in the
If
on, blacklist
then thefunction.
IMEI shall be
IMEI
forbidden
to
start
Uu factor:
periodical
quality
whether the IMEI shall be
measurement.
forbidden inFunction:
specifiedThis
using
Parameter
If
off, then the IMEI will
not be
case.
parameter
indicates
the
IMEI
forbidden.
If
on, then
the
shall
be
utility
switch
forIMEI
power
control.
forbidden
to
do
CS
service
Configuration Rule: Based on
load
balance in RAB setup
the requirement.
Parameter
Function:
This
procedure.
When this switch
is on,
the
parameter
indicates
the
IMEI
If
off,
then
the
IMEI
will
be
power offset parametersnot
related
offset
of
uplink
forbidden.
related to the IMEI is
maximum
effective. SIR target. For the
UE,
whose
IMEI isisindicated
When
this switch
off,
the
Parameter
Function:
This
in
UImeiBlkLis
and with
power
offset
parameters
parameter indicates
the
IMEI
imeiPcSwitch
= 1, the
uplink
related
to
the of
IMEI
is not
reserved
parameter
related
offset
uplink
maximum
SIR
target
need
to
effective.
minimum
SIR target. For the
add this offset.
UE,
whose IMEI
is indicated
Configuration
Rule:
It needs
in
UImeiBlkLis
and
with
to consider the uplink
imeiPcSwitch
= 1,
thecell
uplink
synchronization
and
minimum
SIR
target
need
uplink
capacity.
Parameter Function: This to
add
offset.
If thisthis
parameter
is too
it
parameter
indicates
thebig,
IMEI
Configuration
Rule:
Ittarget
needs
might make
SIR
too
related
offsetthe
of
downlink
to
thethe
uplink
big,consider
and make
uplink For
maximum
DPCH
power.
synchronization
and
cell
Parameter
Function:
This
power
big, itIMEI
would
affect
the
UE,too
whose
is
uplink
capacity.
parameter
indicates
the
the
cell
capacity.
indicated in UImeiBlkLis IMEI
and
If
this
parameter
is
related
offset of downlink
If
thisimeiPcSwitch
parameter
is=too
too
small,
with
1, big,
the it
might
the
target
minimum
DPCH
power.
For
it mightmake
make
theSIR
power
too
downlink
maximum
DPCH
cannot
be
decreased
a
the
UE,
whose
IMEI
istooffset.
small
toneed
satisfy
the this
power
to add
suitable
value,
and
make
the
indicated
in UImeiBlkLis
and
requirement
ofRule:
uplink
Configuration
It receiver
needs
power
cannot
be
decrease
with
imeiPcSwitch
=
1,
the
demodulation,
and it quality
would to
consider
the service
a
suitable
level,
it
would
affect
downlink
minimum
DPCH
affect
the
service
quality
and
and cell capacity.
the
cell
capacity.
power
need
to
add
this
offset.
uplink
coverage.
If the parameter is too big, the
If this parameter
is too
small,
Configuration
Rule:
Itcan
needs
power
of this service
get
itconsider
need
long when
time
tothe
thepower
service
quality
a might
very high
increase
the SIR
from
and
capacity.
radiocell
condition
is target
bad, and
it
the
minimum
value
to
normal
If
the
value
of
the
parameter
will reduce the capacity of the
working
level,
affect
is
too big,
it willand
make
thethe
cell.
service
quality.
power
cannot
be
decrease
to
a
suitable
it willmight
the
power level,
of theand
service
reduce
the the
capacity
of the in
not satisfy
requirement
cell.
different condition.
If the value of the parameter
is too small, it will increase
the call drop rate. Decrease
The default value is set by

the collected user equipment At Commit/New
defaults in the commercial
users
network.
The default value is set by
the collected user equipment At Commit/New
defaults in the commercial
users
network.
Based on the requirement.
At Commit/New
users

Immediately
value equal 0

uplink capacity.
Immediately

uplink capacity.
Immediately

considered the service quality Immediately
and cell capacity.

considered the service quality Immediately
and cell capacity.
No

Object ID of IMEI TAC
Subscriber Profile
Basic parameter
Cann't Modify
No

length of IMEI TAC in the
feature of dedicated priority.
According to the length of

TAC
Immediately
No
No
No
No
No
No
No
No
No
No
The parameter indicates IMEI

TAC saved in RNC. Operator
can put the TAC of IMEI used According to the requirement
Immediately
dedicated priority in this
of operator
parameter.
UDePri which is used by
UImeiTacSPID

Object
ID of Dedicated
This parameter
is the
Priority
Information
subscriber
profile ID set in
RNC. When one UE's IMEI
Function:
indicates
TAC configuerd
thisthe
number
of
neighbor
parameter, it can getEUTRA
this UE's
centre
frequencies
dedicated
priority through this
Related
factor:
The
value of
parameter.
When
core
this
parameter
is determined
network
configures
SPID, this
by
operator's
EUTRA
parameter
must
have the
frequency
resources
same value as SPID and
in core
configuration
of EUTRA
network.
network.
This parameter is bigger, the
number
EUTRA centre
Function:offrequency
band of
frequencies
EUTRAN is
more.Otherwise,
thisThis
Configuration
Rule:
Function:
downlink
E-UTRA
parameter
is
smaller,
the
parameter
should
be set
Absolute
Radio
Frequency
number
of
EUTRA
centre
accordingNumber
to operator network
Channel
frequencies is less.
deployment.
by operator resources and
Function:
Dedicated
priority of
network planning.
The
EUTRAN
EUTRAN frequencies, which
Related
operatorfactor:
would UE
like camping
UE to use
This
parameter
is to
smaller,
the
dedicated
priority
camp on,
priority
is lower.Otherwise,
are configured
in this of
Function:
the number
this
parameter
is bigger, the
parameter.
frequency
UTRAN
priority
is
higher.
If
UEparameter
is expected
to camp on
this
is determined
some
frequency/RAT,
by operator's UTRAN the
prioirty of this
frequency/RAT
frequency
resources.
can
set bigger.
Thisbe
parameter
is bigger, the
number of UTRAN centre
frequencies is
Function:
frequency
more.Otherwise,
thisband of
utran
parameter is smaller, the
Configuration
Rule:centre
This
number of UTRAN
parameter
frequenciesshould
is less.be set
deployment.
Basic parameter
Cann't Modify
Basic parameter
Cann't Modify

Immediately
of operator
resources is mainly
default value.
Immediately

New connection
network deployment.
resources is mainly
default value.
Immediately

default value.
Immediately
resources is mainly
default value.
Immediately

New connection
network deployment.
No
No
No
No
No
No
No
No
No
No
No
No
Function: the downlink carrier

central frequency of the cell
by operator UTRAN
resources and network
Function:
dedicated
planning.The
UTRANpriority of
UTRAN
frequencies, which operator
Related
factor:
camping
would like
UE toUE
use
This
parameter
is to
smaller,
the
dedicated
priority
camp on,
priority
is lower.Otherwise,
are configured
in this
Function:
the number
of GSM
this
parameter
is bigger,
the
parameter.
band
priority is higher.
Related
factor: The
If UE is expected
to value
camp of
on
this
parameter
is
determined
some frequency/RAT, the
by
operator's
GSM
frequency
prioirty
of this
frequency/RAT
Function:
frequency
band the
resources.
can be ARFCN
set bigger.
BCCH
GSM cell uses
This
parameter
is bigger,
Related
factor: The
value the
of
number
of GSMisfrequency
this
parameter
determined
band
is more.Otherwise,
this
by operator's
GSM resource.
parameter
is
smaller,
the
Which frequency band the
number
of GSMbelongs
frequency
GSM resource
to, the
band
is
less.
Function:
dedicated
priority
value of this parameter
is of
GSM
band as the same
configured
Related
factor:
camping
value. The
GSMUE
bands,
which
This
parameter
is smaller,
the
operator
would like
UE to use
priority
is lower.Otherwise,
dedicated
priority to camp on,
this
parameter is
the
are configured
in bigger,
this
priority
is
higher.
parameter.
If UE is expected to camp on
some frequency/RAT, the
prioirty
of this frequency/RAT
This parameter
is the HScan
be set
bigger.
PDSCH
measurement
power
Parameter
Function: This
offset
profile
object
ID.
parameter indicates the ID of
Power Offset profile.
Configuration Rule: Different
configurations of HS-PDSCH
Measurement Power Offset
profile with different ID.
Primary
key canisnot
This parameter
thebe
HSmodified.
Parameter
Function: This
PDSCH measurement
power
parameter
indicatesobject
whether
offset configuration
ID.
HSDPA evolution function is
used in the configuration of
MPO.
Adjustment
Suggestion:
Parameter Function:
This
Bit0~2
separately
indicates
parameter indicates
whether
whether evolution
the following
HSPA+
HSDPA
function
is
function
is used:
64QAM,of
used in the
configuration
Parameter
Function:which
This is
MIMO,
MPO. DC-HSDPA,
parameter
indicates
the
just
for
showing
in
screen
and
Adjustment
Suggestion:
Parameter
Function:
This
assumed
HS-PDSCH
power
can
not
be
reconfigured.
Bit0~2
separately
indicates
parameter
indicates
whether
offset
relative
to P-CPICH/Swhether
the following
HSPA+
HSDPA
evolution
function
CPICH
power
used
for
CQIis
function
is used:
64QAM,
used
in
the
configuration
of
measurement.
MIMO,
DC-HSDPA, which is
MPO.
Configuration
Rule:
The and
just
for showing
in screen
Adjustment
Suggestion:
principle
is
to
control
the CQI
can
notseparately
be reconfigured.
Bit0~2
in the range
form 1indicates
to 30.
whether
the following
HSPA+
If
this parameter
is configured
function
is used:
64QAM,
too big, the
service
might get
MIMO,
big CQI,DC-HSDPA,
and get big which
power,is
just
for
showing
in
screen
but it will reduce the cell and
can
not be reconfigured.
capacity.But
if this parameter
is configured too small, it
might not satisfy the
requirement of CQI.
Adjustment Suggestion: If
HSDPA service quality in
most condition cannot be
satisfied, the value of this
resources is mainly
default value.
Immediately

default value.
Immediately
resources is mainly
default value.
Immediately
resources and the
configuration of GSM
Immediately

default value.
Immediately
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
Identification
parameter, can
not be modified.
not be modified.
Identification
parameter, can
not be modified.
not be modified.
Identification
parameter, can
not be modified.
not be modified.
Next Radio Link
Setup Request or
Next Radio Link
Addition Request
or Next Radio
capacity.
Request
Service or
Node Impact
Equipment
Impaction Level
Service Impaction
Level
How to Impact
Access
No
N/A
Restricted
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
It will be changed
that the maximum
number of UE in a
cell whose
Read/Write
transport resource
will be released
while transport
path is overload.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Cell will be deleted

Read/Write
and reestablished.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Call drop and call

setup failed
Read/Write
Yes
Call drop and call

setup failed
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
No
N/A
Read
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Call drop and call

setup failed
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Restricted
1, the connection
in Iu interface may
be invalid
2, the CN DOMAIN
Read/Write
in SIB1 may
change, and affect
whether the UE
can access the
UTRAN.
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
Yes
Yes
Physical shared
channel
reconfiguration will
Read/Write
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
Read/Write
be triggered, and
SIB5/5bis will
change.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered
SIB5/5bis will
change
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Physical shared
channel
Read/Write
be triggered and
SIB5/5bis will
change.
Physical shared
channel
Read/Write
be triggered and
SIB5/5bis will
change.
No
N/A
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Read/Write
Yes
Read/Write
Yes
Yes
Yes
Yes
Yes
Yes
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Node B will be
deleted and reestablished.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
Cann't Modify
N/A
Read/Write
No
N/A
Read/Write
No
The related
common transport
Read/Write
channel will be
reconfigured.
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes

Read/Write
and reestablished.
Yes

Read/Write
and reestablished.
Yes

Read/Write
and reestablished.
Yes

Read/Write
and reestablished.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Cell will be
reconfigured, but it
will not affect the
run of equipment, it Read/Write
also will not affect
the using and state
of users.
The related
common transport
Read/Write
channel will be
reconfigured.
No
No
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
The cell will be

deleted and setup
again .
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
The related
common transport
Read/Write
channel will be
reconfigured.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
the cell will be

deleted and
reestablished.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Read/Write
The users
assigned the
downlink channel
codes will drop
when those codes
are redistributed to Read/Write
HS-SCCH, EAGCH/E-RGCH in
the case of this
values modified
from
N/A 0~2 to 3~4.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes

Read/Write
and reestablished.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Related common
transport channel
Read/Write
will be deleted and
setup again ..
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes

Read/Write
and reestablished.
Yes
The cell will be

deleted and
reestablished.
Read/Write
No
N/A
Read/Write
Yes
the cell will be

deleted and
reestablished.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
the cell will be

deleted and
reestablished.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Triggering
PHYSICAL
SHARED
Read/Write
CHANNEL
RECONFIGURATI
ON
Physical shared
channel
Read/Write
be triggered, and
SIB5/5bis will
change.
Yes
Yes
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
The cell will be

deleted and setup
again.
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Read/Write
It will change the
occupied
bandwidth of a
CCH and some ue
calls maybe
Read/Write
released if the
factor change
make a bandwidth
overload
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
Yes

Restricted
and reestablished.
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
The users of the

barred AC can not Read/Write
initiate CS call.
Yes
the user which is

barred can not
initiate PS service
Read/Write
Yes
the user which is

barred can not
respond paging
Read/Write
Yes
The users of the

initiate CS call.
Yes
the user which is

barred can not
initiate PS service
Yes
The users of the

initiate CS call.
Yes
the user which is

barred can not
initiate PS service
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Read/Write
If the cell barred
indicator is set to
'Barred', UEs are
not permitted to
select/re-select this Read/Write
cell, but Ues are
permitted to
handover to this
cell.
N/A
Read/Write
No
Yes
No
No
Read/Write
N/A
If InFreqReselInd
is "Not Allowed"
and CellRsvExt is
"Reserved", UEs
are not permitted
to select/re-select
this cell, but Ues
are permitted to
handover to this
cell.
N/A
N/A
Restricted
Read/Write
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
If the number is
reduced, the
services bear on
Read/Write
the deleted EAGCH may be
dropped
If the number is
reduced, the
services bear on
Read/Write
the deleted ERGCH and E-HICH
will be dropped
Yes
Yes
No
N/A
Read/Write
Yes
If the number is
reduced, the
services scheduled
Read/Write
by the deleted HSSCCH will be
dropped
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
Yes
If
the new
N/A
Read/Write
MaxErgHichNum
value is smaller
than the current EAGCH number, the
users,
who are
If the new
Read/Write
being
schduled
MaxEagchNum by
the deleted
Evalue
is smaller
AGCH
take Ethan theand
current
the
current cell as
RGCH/HICHnumb
the
serving
cell
er, the
users,
who
Read/Write
may
drop.
are being schduled
by the deleted EAGCH and take
the current cell as
the serving cell will
drop.
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Triggering
PHYSICAL
SHARED
Read/Write
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
Read/Write
CHANNEL
RECONFIGURATI
ON
Yes
Yes
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Physical shared
channel
Read/Write
be triggered
Physical shared
channel
Read/Write
be triggered, and
SIB5/5bis will
change.
Yes
Yes
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Physical shared
channel
Read/Write
be triggered
Yes
No
Yes
N/A
Physical shared
channel
Read/Write
be triggered
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Read/Write
Physical shared
channel
Read/Write
be triggered.
Physical shared
channel
Read/Write
be triggered and
SIB5/5bis will
change.
Physical shared
channel
Read/Write
be triggered, and
SIB5/5bis will
change.
N/A
Restricted
SCCPCH channel
identity, usually
should not be
modified. If it is
Restricted
modified, the cell
will be deleted and
setup again.
The cell will be
deleted and setup Restricted
again .
The related
common transport
Read/Write
channel will be
reconfigured.
The Related
common transport
channel will be
Read/Write
deleted and setup
again .
The Related
common transport
Read/Write
channel will be
deleted and setup
again .
The Related
common transport
channel will be
Read/Write
deleted and setup
again .
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
Yes
Yes
Yes
Yes
No
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
If
the parameter
Related
RACH will
value
of R99
be deleted
and
PRACH
is
setup again.
modified, it results
Common Transport
Channel
Reconfiguration; If
the parameter
value
of common
If
the parameter
E-DCH
is
value ofPRACH
R99
modified
,
it
results
If
the parameter
PRACH
is
physical
shared
value
of R99
modified,
Common
channel
PRACH
is
Transport Channel
reconfiguration
modified,
it results
of R99 PRACH
will
the
R99 prach
be deleted
and
common
setup . transport
channel will be
deleted and setup
again; If the
parameter value of
common E-DCH
PRACH is modified
,N/A
it results physical
shared channel
reconfiguration
Read/Write
Read/Write
Read/Write
Read
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
The Related R99 Read/Write
PRACH common
transport channel
will be deleted and
setup again . If the
operator switch on Read/Write
the common EDCH, it also results
the physical shared
channle
reconifuration
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
Yes
Related RACH will

be deleted and
Read
setup again.
No
N/A
Restricted
No
N/A
Restricted
The Related
common transport
channel will be
Read/Write
deleted and setup
again .
Yes
No
N/A
Restricted
No
N/A
Restricted
The related
common transport
Read/Write
channel will be
reconfigured.
Yes
No
The related
common transport
channel (MICH
Read/Write
channel) will be
reconfigured.
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Read/Write
Only when uplink
overload happen,
modify this
parameter maybe
affect few online
Read/Write
service, but usually
modify this
parameter has no
affect to the
service.
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
Yes
No
N/A
Read/Write
Only when
downlink overload
happen, modify
this parameter
maybe affect few
Read/Write
online service, but
usually modify this
parameter has no
affect to the
service.
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
PICH Channel
Identity, usually
should not be
Restricted
modified otherwise
cell will be deleted
and reestablished.
The related
common transport
Read/Write
channel will be
reconfigured.
Yes
Yes
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read
No
N/A
Read
No
N/A
Read
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Read/Write
No
N/A
Restricted
No
N/A
Read/Write
No
N/A
Restricted
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
Cann't Modify
N/A
Read/Write
No
N/A
Read/Write
OMC Access path
Parameter
Modifying Version
Parameter
Modifying Detail
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration>Extended Info of
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
RNC
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
RNC
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
RNC
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Extended
Info of
Element->UMTS
RNC
Logical Function
Configuration>Location
Information
GUI: Managed
ConfigurationElement->UMTS
>Location
Area
Logical Function
Configuration
GUI: Managed
Information
Element->UMTS
ConfigurationLogical Function
>Location
Area
ConfigurationConfiguration
>Location
Information
Configuration>Location Area
Configuration>Routing Area
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
Information
Element->UMTS
ConfigurationLogical
Function
>Location
Area
ConfigurationConfiguration>Location
>Routing Area
Information
Configuration
GUI:
Managed
>Location
Area
Logical
Function
ConfigurationConfiguration>Service
>LocationArea
Configuration
in
Information
GUI:
Managed
CS+PS
Domain
>Location
Area
Logical
Function
>LocationArea
Configuration
in
Information
GUI:
Managed
CS+PS
Domain
>Location
Area
Logical
Function
>LocationArea
Configuration
Information in BC
Domain
Configuration>Location Area
GUI:
Managed
>Service Area
Logical
Function
Configuration
in BC
ConfigurationDomain
>PLMN Relating
Configuration->Logic
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
Configuration>PLMN Relating
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
RNC Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
GUI: Managed
RNC
Configuration
Element->UMTS
Logical Function
Configuration>PLMN
Relating
GUI: Managed
Element->UMTS
RNC
Configuration
Logical
Function
Configuration->Qos
GUI: Managed
Configuration
Element->UMTS
Related
to Logical
Logical Function
Iur Link
Configuration->Qos
GUI: Managed
Configuration
Element->UMTS
Related
to Logical
Logical Function
Iur Link
Configuration->Qos
Configuration
Related to Logical
Iur Link
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Qos
Configuration
GUI: Managed
Related
to Logical
Element->UMTS
Iur
Link
Logical Function
Configuration>Service
GUI:
Managed
Configuration->QOS
Element->UMTS
Function
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->QOS
GUI:
Managed
Function->Qos
Basic
Element->UMTS
Configuration
Logical Function
Configuration->Basic
Priority Mapping
Relationship
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
Priority
Mapping
Element->UMTS
Relationship
Logical Function
GUI:
Managed
Priority
Mapping
Element->UMTS
Relationship
Logical Function
Configuration>PLMN
Relating
GUI: Managed
Element->UMTS
Priority
Logical Mapping
Function
Relationship
Configuration->QOS
GUI: Managed
FunctionElement->UMTS
>Scheduling
Priority
Logical Function
Mapping
ConfigurationRelationship
Profile
GUI:
Managed
>Service
Element->UMTS
Configuration->QOS
Logical
Function
FunctionConfiguration>Scheduling Priority
>Service
Mapping
Configuration->QOS
Relationship
Profile
GUI:
Managed
>Scheduling
Priority
Logical Function
Mapping
Profile>Service
>Scheduling
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Scheduling
Priority
Logical Function
Mapping
Profile>Service
>Scheduling
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Scheduling
Priority
Logical Function
Mapping
Profile>Service
>Scheduling
Priority
Configuration->QOS
Mapping
FunctionRelationship
GUI:
Managed
>Scheduling
Priority
Element->UMTS
Mapping
Logical
Function
Relationship
ProfileConfiguration>Scheduling Priority
>Service
Mapping
Configuration->QOS
Relationship
GUI: Managed
>Application
Priority
Logical Function
Mapping
Profile
>Service
Configuration->QOS
GUI: Managed
>Application
Priority
Logical Function
Mapping
Profile
>Service
Configuration->QOS
Function>Application Priority
Mapping
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->QOS
GUI:
Managed
>Application
Priority
Logical Function
Mapping
Profile>Service
>Application
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Application
Priority
Logical Function
Mapping
Profile>Service
>Application
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Application
Priority
Logical Function
Mapping
Profile>Service
>Application
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Application
Priority
Logical Function
Mapping
Profile>Service
>Application
Priority
Configuration->QOS
GUI:
Managed
Mapping
Relationship
>Application
Priority
Logical Function
Mapping
Profile>Service
>Application
Priority
Configuration->QOS
Mapping
FunctionRelationship
GUI:
Managed
>Application
Priority
Element->UMTS
Mapping
Logical
Function
Relationship
ProfileConfiguration>Application Priority
>Service
Mapping
Configuration->QOS
Relationship
GUI: Managed
Function->Transport
Element->UMTS
Bearer
Profile
Logical Type
Function
Related
to
Basic
ConfigurationPriority
>Service
Configuration->QOS
GUI: Managed
Function->Transport
Element->UMTS
Bearer
Profile
Logical Type
Function
Related
to
Basic
>Service
GUI: Managed
Configuration->QOS
Element->UMTS
Function->Transport
Logical
Function
Bearer
Type Profile
ConfigurationRelated
>Serviceto Basic
Priority
Configuration->QOS
GUI: Managed
Function->Transport
Element->UMTS
Bearer Type
Profile
Logical
Function
Related
to Basic
ConfigurationPriority->Transport
>Service
Bearer
Type Related
Configuration->QOS
GUI:
Managed
to
Basic
Priority
Function->Transport
Element->UMTS
Bearer Type
Profile
Logical
Function
Related
to Basic
>Service
Bearer
Type Related
Configuration->QOS
to
Basic
Priority
Function->Transport
Bearer Type Profile
Related to Basic
Priority->Transport
Bearer Type Related
to Basic Priority
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->QOS
GUI: Managed
Function->Transport
Element->UMTS
Bearer Type
Profile
Logical
Function
Related
to Basic
>Service
Bearer
Type Related
Configuration->QOS
GUI:
Managed
to
Basic
Priority
Function->Transport
Element->UMTS
Bearer Type
Profile
Logical
Function
Related
to Basic
>Service
Bearer
Type Related
Configuration->QOS
GUI:
Managed
to
Basic
Priority
Function->Transport
Element->UMTS
Bearer Type
Profile
Logical
Function
Related
to Basic
>Service
Bearer
Type Related
Configuration->QOS
to
Basic
Priority
Function->Transport
GUI:
Managed
Bearer Type Profile
Element->UMTS
Related to Basic
Logical
Function
Priority->Transport
ConfigurationBearer Type Related
>Service
to Basic Priority
Configuration->QOS
GUI: Managed
Function->Dedicated
Element->UMTS
Service
Transport
Logical Function
Bearer
Qos
Profile
Configuration->QOS
GUI: Managed
Function->Dedicated
Element->UMTS
Service
Transport
Logical Function
Bearer
Qos
Profile
ConfigurationGUI:
Managed
>Service
Element->UMTS
Configuration->QOS
Logical
Function
Function->Dedicated
ConfigurationService Transport
>Service
Bearer Qos Profile
Configuration->QOS
GUI: Managed
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
Qos ProfileConfiguration>Dedicated
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
Qos
Configuration
Function->Dedicated
Service Transport
Bearer Qos Profile>Dedicated Service
Transport Bearer
Qos Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->QOS
GUI: Managed
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
GUI:
Managed
Qos
Configuration
Function->Dedicated
Element->UMTS
Service Function
Transport
Logical
Bearer
>Service Service
Transport
Bearer
Configuration->QOS
Qos
Configuration
Function->Dedicated
GUI: Managed
Service Transport
Element->UMTS
Bearer
ProfileLogical Qos
Function
>Dedicated
Service
ConfigurationTransport
>Service Bearer
Qos
Configuration
Configuration->QOS
GUI: Managed
Function->Access
Element->UMTS
Control
Profile
Logical Function
Related
to Basic
>Service
Configuration->QOS
GUI: Managed
Function->Access
Element->UMTS
Control
Profile
Logical Function
Related
to Basic
>Service
GUI: Managed
Configuration->QOS
Element->UMTS
Function->Access
Logical
Function
Control
Profile
>Serviceto Basic
Priority
Configuration->QOS
GUI: Managed
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
ConfigurationPriority->Access
>Service
Control
Related to
Configuration->QOS
Basic
Priority
Function->Access
Control Profile
Related to Basic
Priority->Access
Control Related to
Basic Priority
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->QOS
GUI: Managed
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
GUI:
Managed
Basic
Priority
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
GUI:
Managed
Basic
Priority
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
GUI:
Managed
Basic
Priority
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
GUI:
Managed
Basic
Priority
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
GUI:
Managed
Basic
Priority
Function->Access
Element->UMTS
Control Function
Profile
Logical
Related
to Basic
>Service
Control
Related to
Configuration->QOS
Basic
Priority
Function->Access
GUI:
Managed
Control
Profile
Element->UMTS
Related to Basic
Logical
Function
Priority->Access
ConfigurationControl Related to
>Global
Information
Basic Priority
Configuration->User
GUI: Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical Function
Information
Configuration>Global Information
Configuration->User
GUI: Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical Function
Information
Configuration->User
GUI: Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical Function
Information
Configuration->User
GUI: Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical Function
Information
Configuration->User
Authorized
PLMN+SNAC
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->User
GUI: Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical Function
Information
Configuration->User
GUI:
Managed
Authorized
Element->UMTS
PLMN+SNAC
Logical
Function
Information
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->User
Configuration in
White List
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->User
GUI:
Managed
Configuration
in
Element->UMTS
White
List
Logical Function
Configuration->LAC
GUI:
Managed
and
SNAC
Element->UMTS
Information
Logical Function
Configuration->LAC
GUI:
Managed
and
SNAC
Element->UMTS
Information
Logical Function
GUI:
Managed
Configuration->LAC
Element->UMTS
and SNAC
Logical
Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
Timers and
Constants
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
Timers and
Constants
Information
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI: Managed
Timers
and
Element->UMTS
Constants
Logical Function
Information
Configuration->UE
GUI:
Managed
Timers
and
Element->UMTS
Constants
Logical
Function
Information
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
Configuration->CN
GUI:
Managed
NAS
System
Element->UMTS
Information
Logical Function
GUI:
Managed
Configuration->CN
Element->UMTS
NAS System
Logical
Function
Information
Configuration->Iu
Interface Timers and
Constants
Information
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
GUI: Managed
Interface
Timers and
Element->UMTS
Constants
Logical Function
Information
Configuration->Iu
Interface Timers and
Constants
Information
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI: Managed
>Dynamic
Radio
Element->UMTS
Bearer
Control
Logical Function
Information
Profile
>Dynamic
Radio
Element->UMTS
Bearer
Control
Logical Function
Information
Profile
ConfigurationGUI:
Managed
>Global
Information
Element->UMTS
Function
>Dynamic
Radio
ConfigurationBearer Control
>Global
Information
Information
Profile
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
ProfileConfiguration>Dynamic
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationInformation
>Dynamic Radio
Bearer Control
Information Profile>Dynamic Radio
Bearer Control
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
ConfigurationGUI:
Managed
Information
>Dynamic
Radio
Element->UMTS
Bearer Control
Logical
Function
Information
Radio
>Global Information
Bearer
Control
>Dynamic Radio
Bearer
Control
GUI:
Managed
Information
ProfileElement->UMTS
>Dynamic
Radio
Logical Function
Bearer
Control
>Service
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
Configuration>Global Access
Control Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control
Information
Logical Function
ConfigurationGUI:
Managed
>Global
Access
Element->UMTS
Control Information
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
Configuration
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
Configurationthan V4.12.10.08
>Service
(V3.12.10.08)
Configuration->Hspa
Configuration
N/A
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
Configurationthan V4.12.10.08
>Service
(V3.12.10.08)
Configuration->Hspa
Configuration
GUI: Managed
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
Configuration
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->Hspa
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI:
Managed
Configuration->Hspa
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
Configuration>Common EDCH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
Configuration>Common EDCH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Common
EDCH
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>Service
Element->UMTS
Function
>Common
EDCH
>Service
>Measurement
Element->UMTS
>Limiting
HSDPA
ConfigurationGUI:
GBR Managed
Resource
>Service
Element->UMTS
Consumption
Profile
>Measurement
>Limiting
HSDPA
ConfigurationGBR Resource
>Measurement
Consumption
Configuration-Profile
>Limiting HSDPA
GBR Resource
Consumption Profile>Limiting HSDPA
GBR Resource
Consumption
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Limiting
HSDPA
ConfigurationGBR
Resource
>Service
Consumption
ProfileConfigurationGUI:
Managed
>Limiting
HSDPA
>Measurement
Element->UMTS
GBR Resource
Function
Consumption
>Limiting
HSDPA
GBR
Resource
>Service
Consumption
Configuration-Profile>Limiting
HSDPA
>Measurement
GBR Resource
ConfigurationConsumption
>Limiting HSDPA
Configuration
GUI:
GBR Managed
Resource
Element->UMTS
Consumption ProfileLogical
Function
>Limiting
HSDPA
ConfigurationGBR Resource
>Service
Consumption
GUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
Configuration>MBMS
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>MBMS
Element->UMTS
Configuration
Logical Function
Configuration->UE
GUI: Managed
DTX/DRX
Profile
Element->UMTS
Logical Function
GUI: Managed
Configuration->UE
Element->UMTS
DTX/DRX
Profile
Logical Function
Configuration->UE
DTX/DRX Profile>UE DTX/DRX
Configuration
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
DTX/DRX Profile>UE DTX/DRX
Configuration
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
Configuration->UE
GUI: Managed
DTX/DRX
>UE
DTX/DRX
Logical Function
Configuration
GUI:
Managed
Configuration->UE
Element->UMTS
DTX/DRX ProfileLogical
Function
>UE DTX/DRX
>Service
>Service FunctionElement->UMTS
>Power
Control
Logical Function
Profile
Related
Configuration- to
Service
>Service
>Power
Control
Logical Function
Profile
Related
Configuration- to
Service
>Service
GUI: Managed
>ServiceFunction
FunctionLogical
>Power
Control
ConfigurationProfile
Related to
>Service
Service
>Service
>Power Function
Control
Logical
Profile
Related to
ConfigurationService->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationService
>Service Function>Power Control
Profile Related to
Service->Power
Control Related to
Service
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
Profile Related to
Service->Power
Control Related to
Service
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
Profile Related to
Service->Power
Control Related to
Service
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
Profile Related to
Service->Power
Control Related to
Service
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
ConfigurationGUI:
Managed
Service
>Service
>Power Function
Control
Logical
Profile
Related to
>Service
Control
Related to
>Service
FunctionGUI: Managed
>Power Control
Element->UMTS
Profile
LogicalRelated
Functionto
Service->Power
ConfigurationControl
>ServiceRelated to
Service
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
Configuration>Service Function>Power Control
Related to Service
for White List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
Related to Service
for White List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
Related to Service
for White List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
Related to Service
for White List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Power
Control
Logical Function
Related
to Service
Configurationfor
White
>Service List
>Power
Control
Logical Function
Related
to Service
GUI:
Managed
Configurationfor
White
Element->UMTS
>Service List
Logical
Function
ConfigurationConfiguration>Service Function>Service
>Power Control
to Service
GUI: Managed
>Service
for White FunctionList
Element->UMTS
>Power
Control
Logical Function
Profile
Related to
>Service
Control
Related to
>Service FunctionControl
>Power Related
Control to
Service
and
Diversity
Profile Related
to
Mode
Service->Power
Control Related to
Service->Power
Control Related to
Service
and Diversity
GUI: Managed
Mode
Element->UMTS
Logical Function
Profile Related to
Service->Power
Control Related to
Service->Power
Control Related to
Service
and Diversity
GUI: Managed
Mode
Element->UMTS
Logical Function
>Power
Control
Logical Function
Profile
Related
Configuration- to
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
>Power Related
Control to
Service
and
Diversity
Profile Related
to
Mode
Service->Power
Control Related to
Service->Power
Control Related to
Service and Diversity
Mode
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration>Service Function- Versions earlier
>Power Control
than V4.12.10.08
(V3.12.10.08)
Profile Related to
Service->Power
Control Related to
Service->Power
Control Related to
Mode
GUI: Managed
Element->UMTS
Logical Function
Profile Related to
Service->Power
Control Related to
Service->Power
Control Related to
GUI:
ModeManaged
Element->UMTS
Logical Function
>Service
Element->UMTS
>Service FunctionConfiguration>Power Control
>Service
Profile Related to
>Service FunctionControl Related to
>Power Control
Service->Power
Profile Related to
Control Related to
Service->Power
Control Related to
Mode
Service->Power
Control
Related to
GUI: Managed
Service
and Diversity
Element->UMTS
Mode
Logical Function
Profile Related to
Service->Power
Control Related to
Service->Power
Control Related to
GUI: Managed
Mode
Element->UMTS
Logical Function
Profile Related to
Service->Power
Control Related to
Service->Power
Control Related to
Mode
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Power
Control
Logical Function
Profile
Related
Configuration- to
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control Related
>Power
Control to
Logical
Function
Service
and Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control Related
>Power
Control to
Logical
Function
Service
and Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control Related
>Power
Control to
Logical
Function
Service
and Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
ConfigurationGUI:
Managed
Service->Power
Control
Related
>Power
Control to
Logical
Function
Service
and
Diversity
Profile
Related
to
ConfigurationMode
Service->Power
>Service
Control
Related to
>Power Related
Control to
Service
and
Diversity
Profile Related
to
Mode
Service->Power
GUI:
Managed
Control
Related to
Element->UMTS
Service->Power
Logical
Control Function
Related to
Configuration->Link
Configuration->Iub
Mode
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
Link
GUI: Managed
Element->UMTS
Logical Function
Configuration->Link
Configuration->Iub
GUI:
Managed
Link
Element->UMTS
Logical Function
GUI:
Managed
Iub
Link
Element->UMTS
Configuration
Logical Function
GUI:
Managed
Iub
Link
Element->UMTS
Configuration
Logical Function
GUI:
Managed
Element->UMTS
Iub Link
Logical
Function
Configuration
Information
GUI: Managed
>UTRAN
Logical Function
Registration Area
Information
Configuration>UTRAN
Registration Area
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
GUI:
Managed
ConfigurationMeasurement
Profile
Element->UMTS
>Service
Logical
Function
ConfigurationConfiguration>Measurement
>Service
ConfigurationConfiguration>Traffic
Volume
GUI: Managed
>Measurement
Measurement Profile
Element->UMTS
>Traffic
Volume
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationVolume Event
>Measurement
Measurement
for
>Traffic Volume
RACH
Measurement
Profile->UE Traffic
Volume Event
Measurement
Configuration for
RACH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationVolume Period
>Measurement
Measurement
for
>Traffic Volume
RACH
Measurement
Profile->UE Traffic
Volume Period
Measurement
Configuration for
RACH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationRACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UP
Traffic
>Measurement
Measurement
for
>Traffic Volume
FACH
Measurement
Profile->UP Traffic
Volume Event
Measurement
Configuration for
FACH
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationFACH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
>Measurement
Measurement
for
>Traffic Volume
DCH
Measurement
Profile->UE Traffic
Volume Event
Measurement
Configuration for
DCH
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
>Measurement
Measurement
for
>Traffic Volume
DCH
Measurement
Profile->UP Traffic
Volume Event
Measurement
Configuration for
DCH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
>Measurement
Measurement
for
>Traffic Volume
DCH
Measurement
Profile->UP Traffic
Volume Event
Measurement
Configuration for
DCH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UE
Traffic
ConfigurationGUI:
Managed
Volume
Period
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationDCH
Measurement
>Service
GUI:
Managed
Profile->UE
Traffic
Volume
Period
>Measurement
Logical
Function
Measurement
ConfigurationConfigurationConfiguration
for
>Traffic
Volume
>Service
DCH
Measurement
ConfigurationGUI:
Managed
Profile->UE
Traffic
>Measurement
Element->UMTS
Volume Period
Function
Measurement
>Traffic
Volume
for
Measurement
>Service
DCH
Profile->UP
Traffic
ConfigurationVolume
>Measurement
Measurement
>Traffic Volume
Number
for
Measurement
Streaming
on
Profile->UPClass
Traffic
HS-DSCH
Volume
Measurement
Configuration
Number for
Streaming Class on
HS-DSCH
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Function
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationGUI:
Managed
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
>Traffic
Volume
ConfigurationNumber
for
Measurement
>Service
Streaming
Class
on
Profile->UP
Traffic
ConfigurationHS-DSCH
Volume
>Measurement
Measurement
for
>Traffic Volume
Interactive
and
Measurement
Background
Class
Profile->UP Traffic
on
HS-DSCH
Volume
Measurement
Configuration for
Interactive and
Background Class
on HS-DSCH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Function
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
ConfigurationInteractive
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
ConfigurationGUI:
Managed
on
HS-DSCH
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for
>Traffic
Volume
and
Measurement
>Service
Background
Class
Profile->UP
Traffic
Configurationon
HS-DSCH
Volume
GUI:
Managed
>Measurement
Measurement
Element->UMTS
for
Logical
>Traffic Function
Volume
Interactive
and
Background
Class
>Service
Profile->UP Traffic
on
HS-DSCH
ConfigurationVolume
GUI:
Managed
>Measurement
Measurement
Element->UMTS
for
Logical Function
>Traffic
Volume
Interactive
and
Background Class
>Service
Profile->UP
Traffic
on HS-DSCH
ConfigurationVolume
>Measurement
Measurement
for HS>Traffic Volume
DSCH
in
Measurement
CELL_FACHTraffic
Profile->UP
Volume
Measurement
Configuration for HSDSCH in
CELL_FACH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH
in
Measurement
>Service
CELL_FACHTraffic
Profile->UP
ConfigurationVolume
GUI:
Managed
>Measurement
Measurement
Element->UMTS
for HSLogical
>Traffic Function
Volume
DSCH
in
CELL_FACHTraffic
>Service
Profile->UP
ConfigurationVolume
GUI: Managed
>Measurement
Measurement
Element->UMTS
for HSLogical
Function
>Traffic
DSCH inVolume
CELL_FACH
>Service
Profile->UP
ConfigurationThroughput Event
>Measurement
Measurement
for E>Traffic Volume
TTI
Switching
Measurement
Profile->UP
Throughput Event
Measurement
Configuration for ETTI Switching
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
ConfigurationGUI:
Managed
Throughput
Event
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationTTI
Switching
Measurement
>Service
Profile->UP
Traffic
ConfigurationVolume
>Measurement
Measurement
DCH
Measurement
Profile->UP Traffic
Volume
Measurement
Configuration for EDCH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
Measurement
>Service
Profile->UP
Traffic
ConfigurationVolume
>Measurement
Measurement
DCH
in
CELL_FACH
Measurement
Profile->UP Traffic
Volume
Measurement
Configuration for EDCH in CELL_FACH
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>Traffic
Volume
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
Profile->UP
Traffic
ConfigurationGUI:
Managed
Volume
>Measurement
Element->UMTS
Measurement
Function
Configuration
for E>Traffic
Volume
ConfigurationDCH
in
CELL_FACH
Measurement
>Service
GUI:
Managed
Profile->UP
Traffic
Volume
>Measurement
Logical
Function
Measurement
ConfigurationConfigurationConfiguration
for E>Traffic
Volume
>Service
DCH
in
CELL_FACH
Measurement
ConfigurationGUI:
Managed
Profile->UP
Traffic
>Measurement
Element->UMTS
Volume
Function
Measurement
>Traffic
Volume
for EMeasurement
>Service
DCH
in
CELL_FACH
Profile->E-DCH
ConfigurationThroughput
>Measurement
Measurement
DSCH/E-DCH
Measurement to HSDSCH/DCH
Profile->E-DCH
Switching
Throughput
Measurement
Configuration for HSDSCH/E-DCH to HSDSCH/DCH
Switching
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Function
>Traffic
Volume
>Service
Profile->E-DCH
ConfigurationGUI:
Managed
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
ConfigurationDSCH/E-DCH
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationGUI:
Managed
Switching
Throughput
>Measurement
Element->UMTS
Measurement
Function
Configuration
for HS>Traffic
Volume
to HSMeasurement
>Service
DSCH/DCH
Profile->E-DCH
ConfigurationSwitching
Throughput
>Measurement
Measurement
DSCH/E-DCH
GUI:
Managed to HSMeasurement
DSCH/DCH
Element->UMTS
Profile->E-DCH
Switching
Logical
Function
Throughput
>Service
Configuration for HSConfigurationDSCH/E-DCH
GUI: Managed to HS>Measurement
DSCH/DCH
Element->UMTS
Configuration->IntraSwitching
Logical
Function
frequency
Profile
>Service
Configuration>Measurement
Configuration->Intrafrequency
Measurement Profile
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical
Function
GUI: Managed
>Service
Logical Function
>Service
Configuration->IntraConfigurationGUI:
Managed
frequency
>Measurement
Element->UMTS
Measurement
Profile
Configuration->IntraLogical Function
frequency
ConfigurationGUI:
Managed
Measurement
>Service
Element->UMTS
Profile->IntraConfigurationLogical
Function
frequency
>Measurement
Configuration->Intra>Service
Configuration
frequency
ConfigurationGUI:
Managed
Related
to Traffic
Measurement
>Measurement
Element->UMTS
Category
Profile->IntraConfiguration->IntraLogical
Function
frequency
frequency
Measurement
>Service
Configuration
Profile->IntraConfigurationGUI:
Managed
Related
to Traffic
frequency
>Measurement
Element->UMTS
Category
Measurement
Configuration->IntraLogical
Function
Configuration
frequency
to Traffic
Measurement
>Service
Category->UEIntraProfile->IntraConfigurationGUI:
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Category->UEIntraProfile->IntraConfigurationfrequency
frequency Event
>Measurement
Measurement
Measurement
Configuration->IntraConfiguration
for
Configuration
frequency
CPICH
Ec/No
Related
to Traffic
Measurement
Category->UEIntraProfile->Intrafrequency
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
RelatedEc/No
to Traffic
Category->UEIntrafrequency Event
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
frequency
>Service
Managed
frequency
>Measurement
Element->UMTS
Measurement
Function
Configuration
frequency
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
frequency Event
>Measurement
Measurement
Measurement
for
Configuration
frequency
CPICH
RSCP
Related
to Traffic
Measurement
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
RelatedRSCP
to Traffic
Category->UEIntrafrequency Event
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
frequency
>Service
Managed
frequency
>Measurement
Element->UMTS
Measurement
Function
Configuration
frequency
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
frequency Event
>Measurement
Measurement
Measurement
Configuration->IntraGUI:
Managedfor
Configuration
Configuration
frequency
Element->UMTS
CPICH
RSCP
Related
to Traffic
Measurement
Logical
Function
Managed
frequency
Event
frequency
>Service
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
>Measurement
ConfigurationCPICH
RSCP
Related
to Traffic
Configuration->Intra>Service
Category->UEIntrafrequency
ConfigurationGUI:
Managed
frequency
Event
Measurement
>Measurement
Element->UMTS
Measurement
Profile->IntraConfiguration->IntraLogical
Function
Configuration
for
frequency
frequency
ConfigurationCPICH
RSCP
Measurement
Measurement
>Service
Configuration
Managed
Unrelated
to Traffic
frequency
>Measurement
Element->UMTS
Category
Measurement
Function
Configuration
frequency
ConfigurationUnrelated
to Traffic
Measurement
>Service
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Function
Configuration
for
Configuration
frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
frequency Period
>Measurement
Measurement
Measurement
for
Configuration
frequency
CPICH
Ec/No
Unrelated
to Traffic
Measurement
frequency Period
Measurement
Measurement
Configuration
Configuration for
CPICH
RSCP
Unrelated
to Traffic
Category->UEIntrafrequency Period
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
frequency
>Service
Profile->IntraConfigurationfrequency
GUI:
Managed
>Measurement
Measurement
Element->UMTS
Logical
Function
frequency
Unrelated
to Traffic
Category->UEIntra>Service
Profile->Intrafrequency
Period
Configurationfrequency
GUI:
Managed
Measurement
>Measurement
Measurement
Element->UMTS
Configuration
for
Logical Function
CPICH
RSCP
frequency
Unrelated to Traffic
Category->UEIntra>Service
Profile->Intrafrequency
Period
ConfigurationGUI:
Managed
frequency
Measurement
>Measurement
Element->UMTS
Measurement
Configuration
for
Function
Configuration
CPICH
RSCP
frequency
ConfigurationUnrelated to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
Ec/No
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Profile->IntraConfigurationSet
Measurement
frequency
>Measurement
Configuration
for
Measurement
Configuration->IntraCPICH
Ec/No
Configuration
frequency
Unrelated
to Traffic
Measurement
Category->Detected
Profile->IntraSet
Measurement
frequency
Configuration
Measurement for
CPICH
Ec/No
Configuration
Category->Detected
Set Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
frequency
>Service
Managed
frequency
>Measurement
Element->UMTS
Measurement
Function
Configuration
frequency
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
RSCP
Configuration
frequency
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
RSCP
Configuration
frequency
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
RSCP
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
RSCP
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Managed
Set
Measurement
frequency
>Measurement
Element->UMTS
Configuration
for
Measurement
Function
CPICH
RSCP
Configuration
frequency
to Traffic
Measurement
>Service
Category->Detected
Profile->IntraConfigurationSet
Measurement
frequency
>Measurement
Configuration
for
Measurement
Configuration->IntraCPICH
RSCP
Configuration
frequency
Unrelated
to Traffic
Measurement
Category->Detected
GUI:
Managed
Profile->IntraSet
Measurement
Element->UMTS
frequency
Configuration
for
Logical
Function
Measurement
CPICH
RSCP
>Service
ConfigurationCategory->Detected
GUI: Managed
>Measurement
Set Measurement
Element->UMTS
Configuration->UE
Configuration
for
Logical
Function
Inter-frequency
CPICH RSCP
Profile
>Service
>Measurement
Element->UMTS
Configuration->UE
Logical
Function
GUI:
Managed
Inter-frequency
Measurement
Profile
>Service
Logical Function
>Service
Configuration->UE
ConfigurationInter-frequency
>Measurement
Measurement
Profile
Configuration->UE
Inter-frequency
Measurement
Profile->Interfrequency
Measurement
Configuration
Related to Traffic
Category
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
>Service
Logical
Function
>Service
Configuration->UE
GUI:
Managed
>Measurement
Measurement
Element->UMTS
Configuration->UE
Profile->InterLogical Function
Inter-frequency
frequency
Measurement
>Service
Profile->InterConfiguration
ConfigurationGUI:
Managed
frequency
Related
to Traffic
>Measurement
Element->UMTS
Measurement
Category
Configuration->UE
Logical
Function
Configuration
Inter-frequency
to Traffic
Measurement
>Service
Category->UE InterProfile->InterConfigurationGUI:
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
InterProfile->InterConfigurationGUI:
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related to Traffic
Measurement
>Service
(UTRAN)
Category->UE
InterProfile->InterConfigurationfrequency
Event
frequency
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
for
Configuration
Inter-frequency
CPICH
Ec/No
Related to Traffic
Measurement
(UTRAN)
Category->UE
Profile->Inter- Interfrequency
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
RelatedEc/No
to Traffic
(UTRAN)
Category->UE
Interfrequency Event
Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Inter-frequency
>Service
Profile->InterConfigurationGUI:
Managed
frequency
>Measurement
Element->UMTS
Measurement
Configuration->UE
Logical
Function
Configuration
Inter-frequency
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(UTRAN)
Category->UE
Event
frequency
GUI:
Managed
>Measurement
Measurement
Measurement
Element->UMTS
Configuration->UE
Configuration
for
Configuration
Logical
Function
Inter-frequency
CPICH
RSCP
Related
to Traffic
(UTRAN)
Category->UE
>Service
Event
GUI:
Managed
Measurement
>Measurement
Measurement
Element->UMTS
Configuration
for
Configuration->UE
Configuration
Logical
Function
CPICH
RSCP
Inter-frequency
Related to Traffic
Configuration(UTRAN)
Measurement
Category->UE
Inter>Service
Event
ConfigurationGUI:
Managed
frequency
Measurement
>Measurement
Element->UMTS
Measurement
Configuration
for
Configuration->UE
Logical
Function
Configuration
CPICH
RSCP
Inter-frequency
to Traffic
(UTRAN)
Measurement
>Service
Category->UE
Event
frequency
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
for
Configuration
Inter-frequency
CPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
Category->UE
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
(GSM)
RelatedEc/No
to Traffic
Category->UE Interfrequency Event
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Inter-frequency
>Service
Managed
frequency
>Measurement
Element->UMTS
Measurement
Configuration->UE
Logical
Function
Configuration
Inter-frequency
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
(GSM)
Related
to Traffic
Measurement
>Service
Category->UE
Event
frequency
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
for
Configuration
Inter-frequency
CPICH
RSCP
(GSM)
Related
to Traffic
Measurement
Category->UE
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
(GSM)
RelatedRSCP
to Traffic
Category->UE Interfrequency Event
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
GUI:
Managed
>Measurement
Logical
Function
Configuration->UE
>Service
Measurement
ConfigurationProfile->InterGUI:
Managed
>Measurement
frequency
Element->UMTS
Configuration->UE
Measurement
Logical Function
Inter-frequency
Configuration
Related to Traffic
>Service
Profile->InterCategory->UE
ConfigurationGUI:
Managed Interfrequency
frequency
Event
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
Configuration
for
Inter-frequency
to
Traffic
CPICH
RSCP
Measurement (GSM)
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Related to Traffic
Measurement
>Service
(EUTRAN)
Category->UE
Event
frequency
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
for
Configuration
Inter-frequency
CPICH
RSCP
Related to Traffic
Measurement
(EUTRAN)
Category->UE
frequency Event
Measurement
Measurement
Configuration
Configuration for
CPICH
RelatedRSCP
to Traffic
(EUTRAN)
Category->UE
Interfrequency Event
Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Inter-frequency
>Service
Managed
frequency
>Measurement
Element->UMTS
Measurement
Configuration->UE
Logical
Function
Configuration
Inter-frequency
to Traffic
Measurement
>Service
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(EUTRAN)
Managed
frequency
Event
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
RSCP
Related
to Traffic
Measurement
>Service
(EUTRAN)
Category->UE InterProfile->InterConfigurationfrequency
Event
frequency
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
Configuration
GUI:
Managedfor
Inter-frequency
CPICH
RSCP
Related
to Traffic
Element->UMTS
Measurement
(EUTRAN)
Category->UE
InterLogical
Function
Event
GUI:
Managed
Measurement
>Service
Measurement
Element->UMTS
Configuration
for
Logical
Function
CPICH
RSCP
>Measurement
Related to Traffic
Configuration(EUTRAN)
Configuration->UE
Category->UE
Inter>Service
Inter-frequency
frequency
Event
ConfigurationGUI:
Managed
Measurement
Measurement
>Measurement
Element->UMTS
Profile->InterConfiguration
for
Configuration->UE
Logical
Function
frequency
CPICH
RSCP
Inter-frequency
(EUTRAN)
Measurement
>Service
Configuration
Managed
Unrelated
to Traffic
frequency
>Measurement
Element->UMTS
Category
Measurement
Configuration->UE
Logical
Function
Configuration
Inter-frequency
to Traffic
Measurement
>Service
Category->UEInterProfile->InterConfigurationGUI:
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
Managed
frequency
Period
frequency
>Measurement
Element->UMTS
Measurement
Measurement
Configuration->UE
Logical
Function
Configuration
for
Configuration
Inter-frequency
ConfigurationCPICH
Ec/No
Unrelated
to Traffic
Measurement
>Service
Category->UEInterProfile->InterConfigurationfrequency
frequency Period
>Measurement
Measurement
Measurement
Configuration->UE
Configuration
for
Configuration
Inter-frequency
CPICH
Ec/No
Unrelated
to Traffic
Measurement
Category->UEInterProfile->Interfrequency
frequency Period
Measurement
Measurement
Configuration
Configuration for
CPICH
RSCP
Unrelated
to Traffic
Category->UEInterfrequency Period
Measurement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Inter-frequency
>Service
Profile->InterConfigurationfrequency
>Measurement
Measurement
Configuration->UE
Configuration
Inter-frequency
Unrelated
to Traffic
Measurement
Category->UEInterProfile->InterGUI:
Managed
frequency
frequency Period
Element->UMTS
Measurement
Measurement
Logical
Function
Configuration
for
Configuration
ConfigurationCPICH
RSCP
Unrelated
>Service to Traffic
Category->UEInterConfigurationGUI:
Managed
frequency
Period
>Measurement
Element->UMTS
Measurement
Configuration->InterLogical
Function
Configuration
for
RAT
Measurement
ConfigurationCPICH
RSCP
Profile
>Service
>Measurement
Element->UMTS
Configuration->InterLogical Function
RAT
Measurement
ConfigurationGUI:
Managed
Profile
>Service
Element->UMTS
>Measurement
ConfigurationConfiguration->Inter>Service
RAT
Measurement
ConfigurationGUI:
Managed
Profile
>Measurement
Element->UMTS
RAT Measurement
ConfigurationGUI:
Managed
Profile->Inter-RAT
>Service
Element->UMTS
Measurement
Function
Configuration
>Measurement
to Traffic
Configuration->Inter>Service
Category
RAT Measurement
ConfigurationGUI:
Managed
Profile->Inter-RAT
>Measurement
Element->UMTS
Measurement
Function
Configuration
RAT
Measurement
to Traffic
Profile->Inter-RAT
>Service
Category
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationConfiguration for
Configuration
>Measurement
CPICH
Ec/No
(GSM)
Related
to Traffic
Configuration->InterCategory->UE
InterRAT Measurement
RAT
Event
Profile->Inter-RAT
Measurement
Measurement
Configuration for
Configuration
CPICH
(GSM)
RelatedEc/No
to Traffic
Category->UE InterRAT Event
Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
RAT
Measurement
ConfigurationProfile->Inter-RAT
>Service
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
(GSM)
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
Configuration
>Measurement
CPICH
RSCP
(GSM)
Related
to Traffic
RAT
Event
Profile->Inter-RAT
Measurement
Measurement
Configuration for
Configuration
CPICH
(GSM)
RelatedRSCP
to Traffic
Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
RAT
Measurement
>Service
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
Related
to Traffic
Function
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
GUI:
Managed
for
Configuration
Element->UMTS
>Measurement
CPICH
RSCP
(GSM)
Related
to
Traffic
Logical
Function
InterConfigurationRAT Measurement
RAT
Event
>Service
Profile->Inter-RAT
Measurement
GUI:
Managed
Configuration
for
>Measurement
Configuration
Element->UMTS
CPICH
RSCP
(GSM)
Configuration->InterRelated
to
Traffic
Logical Function
RAT
Measurement
Category->UE
InterConfigurationProfile->Inter-RAT
RAT Event
>Service
Measurement
Measurement
ConfigurationGUI:
Managed
Configuration
Configuration
for
>Measurement
Element->UMTS
Related
to Traffic
CPICH
RSCP
(GSM)
Function
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
InterRAT
Measurement
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
for
Configuration
>Measurement
CPICH
Ec/No
Related
to Traffic
Configuration->Inter(EUTRAN)
Category->UE
InterRAT
Measurement
RAT
Event
Profile->Inter-RAT
Measurement
Measurement
Configuration
Configuration for
CPICH
RelatedEc/No
to Traffic
(EUTRAN)
Measurement
Configuration for
CPICH Ec/No
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Logical Function
>Measurement
Element->UMTS
RAT Measurement
>Service
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
Related
to Traffic
Function
Category->UE
ConfigurationRAT Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Related
to Traffic
Function
(EUTRAN)
Category->UE
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Related
to Traffic
Function
(EUTRAN)
Category->UE
ConfigurationRAT
Event
Profile->Inter-RAT
>Service
Measurement
Measurement
for
Configuration
>Measurement
CPICH
RSCP
Related
to Traffic
Configuration->Inter(EUTRAN)
Category->UE
GUI:
Managed InterRAT
Measurement
RAT
Event
Element->UMTS
Profile->Inter-RAT
Measurement
Logical
Function
Measurement
Configuration
CPICH
>Service
RelatedRSCP
to Traffic
(EUTRAN)
ConfigurationCategory->UE Inter>Measurement
RAT Event
Configuration->InterMeasurement
RAT
Measurement
Configuration
for
Profile->Inter-RAT
CPICH RSCP
Measurement
(EUTRAN)
Configuration
Category
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Element->UMTS
Logical Function
>Measurement
Element->UMTS
RAT
Measurement
>Service
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
Unrelated
to Traffic
Function
Category->UEInterRAT
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
Ec/No
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
ConfigurationGUI:
Managedfor
Configuration
Configuration
>Measurement
Element->UMTS
CPICH
RSCP
Unrelated
to Traffic
Function
Measurement
ConfigurationRAT
Period
Profile->Inter-RAT
>Service
Measurement
Measurement
Configuration
>Measurement
CPICH
RSCP
Unrelated
to Traffic
Configuration->InterCategory->UEInterRAT Measurement
RAT
Period
Profile->Inter-RAT
Measurement
Measurement
Configuration for
Configuration
CPICH
RSCP
Unrelated
to Traffic
Category->UEInterRAT Period
Measurement
Configuration for
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>NodeB
Common
Profile
>Service
>Measurement
Element->UMTS
>NodeB
Common
ConfigurationGUI:
ManagedProfile
Measurement
>Service
Element->UMTS
>Measurement
>NodeB
Common
ConfigurationGUI:
ManagedProfile
Measurement
>Measurement
Element->UMTS
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Common
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Common
>Service
Profile->NodeB
ConfigurationCommon
>Measurement
Measurement
>NodeB Common
Measurement
Profile->NodeB
Common
Measurement
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>NodeB Common
>Service
Profile->NodeB
ConfigurationCommon
>Measurement
Measurement
ConfigurationGUI:
Managed
Configuration
>NodeB Common
Element->UMTS
Measurement
Logical Function
Profile->NodeB
ConfigurationCommon
>Service
Measurement
ConfigurationGUI:
Managed
Configuration
>Measurement
Element->UMTS
>NodeB
Dedicated
ConfigurationGUI:
ManagedProfile
Measurement
>Service
Element->UMTS
>Measurement
>NodeB
Dedicated
ConfigurationGUI:
ManagedProfile
Measurement
>Measurement
Element->UMTS
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationDedicated
>Measurement
Measurement
>NodeB Dedicated
Measurement
Profile->NodeB
Dedicated
Measurement
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationGUI:
Managed
Dedicated
>Measurement
Element->UMTS
Measurement
Function
Configuration
>NodeB Dedicated
>Service
Profile->NodeB
ConfigurationDedicated
>Measurement
Measurement
>NodeB
Dedicated
GUI:
Managed
Measurement
Element->UMTS
Profile->NodeB
Logical Function
Dedicated
>External Resource
Configuration
ConfigurationGUI:
Managed
>External
ENodeB
Element->UMTS
Function
Logical Function
Configuration>External Resource
ConfigurationGUI:
Managed
>External
ENodeB
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
ENodeB
Element->UMTS
Function
Logical Function
GUI:
Managed
>External ENodeB
Logical
FunctionFunction
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell FDD
Configuration>External ENodeB
Function->External
EUTRAN Cell FDD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell FDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell FDD
Function->External
EUTRAN Cell FDD
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN Cell TDD
Function->External
EUTRAN Cell TDD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
>External
ENodeB
Element->UMTS
Function->External
Logical Function
EUTRAN
Cell TDD
ConfigurationGUI:
Managed
>External
ENodeB
Element->UMTS
Function->External
Logical
Function
EUTRAN
Cell TDD
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
ConfigurationGUI:
Managed
>External
RNC
Element->UMTS
Function
Logical Function
Configuration>External RNC
Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN Cell
Function->External
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
>External
RNC
Element->UMTS
Function->External
Logical Function
UTRAN
Cell
Configuration>External
RNC
GUI: Managed
Function->External
Element->UMTS
UTRAN
Cell
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
Configuration>External GSM Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
>External
GSM Cell
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration>UTRAN Cell
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration>UTRAN
Cell
GUI: Managed
Element->UMTS
Logical Function
Configuration>UTRAN Cell>Extended Info of
UTRAN Cell
GUI: Managed
Element->UMTS
Logical Function
UTRAN Cell
GUI: Managed
Element->UMTS
Logical Function
Configuration>UTRAN Cell>Extended
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
UTRAN Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
Info of
GUI: Managed
UTRAN
Cell
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
Cell Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
V4.12.10.14
(3.12.10.14)
ADD
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI: Managed
Cell
Configuration
Element->UMTS
Logical Function
GUI:
Managed
Element->UMTS
Cell Configuration
Logical Function
Configuration>UTRAN Cell>Adjacent
Relation
GUI:
Managed
>Neighbouring
Logical FunctionCell
Relation
GUI:
Managed
>Neighbouring
Configuration>UTRAN Cell>Adjacent Relation
Configuration>Neighbouring Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Configuration>Neighbouring Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
>Neighbouring
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Configuration->GSM
Neighbouring Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Relation
GUI:
Managed
Configuration->GSM
Element->UMTS
Neighbouring
Cell
Logical Function
Configuration->GSM
Neighbouring Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Relation
GUI: Managed
>EUTRAN
Logical Function
Neighbouring
Configuration-Cell
>UTRAN Cell>Adjacent
Relation
GUI: Managed
>EUTRAN
Logical Function
Neighbouring
Configuration-Cell
>UTRAN Cell>Adjacent Relation
GUI:
Managed
>EUTRAN
Logical
Function
Neighbouring
Cell
Configuration>UTRAN Cell->Cell
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection and
Reselection
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection and
Reselection
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection and
Reselection
Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection
and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Selection and
GUI:
Managed
Reselection
Element->UMTS
Information
Logical Function
Configuration>UTRAN Cell->Hspa
Configuration In A
Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration In A
Cell
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration In A
Cell
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
Configuration
GUI: ManagedIn A
Cell
Element->UMTS
Logical Function
GUI:
ManagedIn A
Configuration
Element->UMTS
Cell
Logical Function
Configuration>UTRAN Cell>MBMS
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
Configuration In A
Cell
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
GUI:
Managed
Configuration
In A
Element->UMTS
Cell
Logical Function
ConfigurationGUI:
Managed
>MBMS
Service
Element->UMTS
Area
Configuration
Logical Function
ConfigurationGUI:
Managed
>PLMN
Relating
Element->UMTS
>MBMSFunction
Service
ConfigurationArea Configuration
>PLMN Relating
>MBMS
Service
Element->UMTS
Area
>MBMS
Preferred
ConfigurationFrequency
Layer
>PLMN Relating
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Preferred
Layer
>PLMN Relating
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Preferred
Layer
>PLMN Relating
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Preferred
Layer
>PLMN Relating
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Preferred
Layer
>PLMN Relating
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Non
ConfigurationPreferred
Frequency
>PLMN
Relating
Layer
Configuration
>MBMS
Service
Element->UMTS
Area
>MBMS
Non
Frequency
>PLMN
Relating
Layer
Configuration
Configuration>MBMS Service
Area Configuration>MBMS Non
Preferred Frequency
Layer Configuration
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>MBMS
Service
Element->UMTS
Area
>MBMS
Non
Frequency
>PLMN Relating
Layer Configuration
Configuration>MBMS Service
Area
>MBMS
Non
Element->UMTS
Preferred
Frequency
Logical Function
Layer Configuration
Configuration>UTRAN Cell>EFACH
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration>UTRAN
CellGUI: Managed
>EFACH
Element->UMTS
Configuration
Logical Function
Configuration>UTRAN Cell>Channel
GUI: Managed
>SCCPCH
Logical Function
Configuration
GUI: Managed
>SCCPCH
Logical Function
Configuration
GUI: Managed
>SCCPCH
Logical Function
Configuration
GUI: Managed
>SCCPCH
Logical Function
Configuration
GUI: Managed
>SCCPCH
Logical Function
Configuration
GUI: Managed
>SCCPCH
Logical Function
Configuration
Configuration>SCCPCH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
Configuration->AICH
Configuration>PRACH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
GUI: Managed
Configuration->AICH
Element->UMTS
>PRACH
>UTRAN Cell>Channel
Configuration->AICH
GUI:
Managed
>PRACH
Logical Function
Configuration
GUI:
Managed
Configuration->AICH
Element->UMTS
Configuration
Logical Function
GUI:
Managed
Configuration->AICH
Element->UMTS
Configuration
Logical Function
Configuration->AICH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
Configuration->MICH
Element->UMTS
Configuration
Logical Function
GUI:
Managed
Configuration->MICH
Element->UMTS
Configuration
Logical Function
GUI:
Managed
Configuration->MICH
Element->UMTS
Configuration
Logical Function
Configuration->MICH
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration>UTRAN Cell->Load
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control Information
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
Control
Information
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>UTRAN
Cell->Load
Element->UMTS
Control Information
Logical Function
GUI: Managed
>SCPICH
Logical Function
Configuration
GUI: Managed
>SCPICH
Logical Function
Configuration
GUI: Managed
>SCPICH
Logical Function
Configuration
Configuration>UTRAN CellGUI:
Managed
>Channel
Element->UMTS
Function
>SCPICH
>UTRAN Cell>Channel
Configuration>SCCPCH
Configuration->PICH
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
GUI: Managed
>SCCPCH
Logical Function
Configuration->PICH
>UTRAN Cell>Channel
ConfigurationGUI:
Managed
>SCCPCH
Element->UMTS
Configuration->PICH
Logical
Function
Configuration
GUI: Managed
>Service
Function
Logical Function
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
Configuration>Service Function>Service Basic
Configuration
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Service
>Service
Basic
Logical Function
Configuration
>Service
>Service
Basic
Logical Function
Configuration
GUI:
Managed
>Service FunctionLogical
>ServiceFunction
Basic
>Service
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Internal
GUI:
Managed
Profile
Element->UMTS
>Service
Logical
Function
>Service
Configuration->UE
ConfigurationInternal
GUI: Managed
>Measurement
Measurement Profile
Element->UMTS
Configuration->UE
Logical Function
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationAMR
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationAMR
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationAMR
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationAMR
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationAMR
Measurement
>Service
Profile->UE
ConfigurationTransmitted Power
>Measurement
Event
Measurement
Configuration->UE
Configuration
for
Internal
AMR
Measurement
Profile->UE
Transmitted Power
Event Measurement
Configuration for
AMR
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for PS
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for PS
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for PS
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for PS
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for PS
Internal
>Service
Profile->UE
GUI:
Managed
ConfigurationTransmitted
Power
Element->UMTS
>Measurement
Event
Measurement
Logical
Function
Configuration->UE
Configuration
for PS
ConfigurationInternal
>Service
Measurement
ConfigurationProfile->UE
GUI: Managed
>Measurement
Transmitted Power
Element->UMTS
Configuration->UE
Event Measurement
Logical
Function
Internal
Configuration for PS
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationHandover
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
>Measurement
Event
Measurement
Configuration->UE
Configuration
for
Internal
Handover
Measurement
Profile->UE
Transmitted Power
Event Measurement
Configuration for
Handover
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Period Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationLocation
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Period
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Period
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Period
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Period
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationUTRAN
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationUTRAN
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Time Managed
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationUTRAN
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationTime Difference
>Measurement
Event
Measurement
Configuration->UE
Configuration
for
Internal
UTRAN
Measurement
Profile->UE Rx-Tx
Time Difference
Event Measurement
Configuration for
UTRAN
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Internal
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationUTRAN
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event Measurement
Configuration->UE
Logical
Function
Configuration
for
Internal
ConfigurationUTRAN
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
Rx-Tx
ConfigurationGUI:
Managed
Time
Difference
>Measurement
Element->UMTS
Event
Measurement
Configuration->UE
Logical
Function
Configuration
for RL
Internal
ConfigurationTiming
Adjustment
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event
Report for
Configuration->UE
Logical
Function
Power
Limitation
Internal
ConfigurationJudgement
Measurement
>Service
Profile->UE
>Measurement
Event
Report for
Configuration->UE
Power
InternalLimitation
Judgement
Measurement
Profile->UE
Transmitted Power
Event Report for
Power Limitation
Judgement
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Measurement
Element->UMTS
Configuration->UE
Logical Function
Internal
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event Report for
Configuration->UE
Logical
Function
Power
Limitation
Internal
Measurement
>Service
Profile->UE
ConfigurationGUI:
Managed
Transmitted
Power
>Measurement
Element->UMTS
Event Report for
Configuration->UE
Logical
Function
Power
Limitation
Internal
Measurement
>Service
Profile->UE
ConfigurationTransmitted
Power
>Measurement
Event Report for
Configuration->UE
Power
InternalLimitation
Judgement
GUI:
Managed
Measurement
Element->UMTS
Profile->UE
Logical
Function
Transmitted
Power
ConfigurationEvent Report for
>UTRAN
Cell->Cell
Power Limitation
Reselection
Judgement
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
Frequency and
Priority Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
Frequency and
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
GUI:
Managed
Frequency
and
Element->UMTS
Priority
Information
Logical Function
Reselection
Frequency and
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance Information
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance Information
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
Balance Information
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Balance
Information
GUI: Managed
Element->UMTS
Logical Function
GUI:
Managed
Balance
Information
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
Configuration
N/A
N/A
V4.12.10.14
(3.12.10.14)
ADD
N/A
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
GUI: Managed
Configuration
Element->UMTS
Logical Function
Configuration->MR
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
V4.12.10.14
(3.12.10.14)
ADD
GUI: Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR
GUI:Configuration
Managed
Element->UMTS
Logical Function
MR Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->CFN
GUI: Managed
Offset
Configuration
Element->UMTS
Logical Function
Configuration->CFN
GUI: Managed
Offset
Configuration
Element->UMTS
Logical Function
Configuration->CFN
GUI: Managed
Offset
Configuration
Element->UMTS
Logical Function
Configuration->CFN
GUI: Managed
Offset
Configuration
Element->UMTS
Logical Function
Configuration->CFN
GUI: Managed
Offset
Configuration
Element->UMTS
Logical Function
Configuration>Global
Information
GUI: Managed
Configuration->CFN
Element->UMTS
Offset
LogicalConfiguration
Function
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on Service
Configuration>Handover
Configuration Based
on Service
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
>Handover
Element->UMTS
Configuration
Based
Logical Function
on
Service
ConfigurationGUI:
Managed
>Handover
Element->UMTS
Configuration Based
Logical
Function
on Service
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
Configuration>Application Service
Type Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>Application
Service
Element->UMTS
Type
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
ConfigurationGUI:
Managed
>QChat
Service
Element->UMTS
Configuration
Logical Function
Configuration>QChat Service
Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->DPI
GUI: Managed
Node->DPI
Basic
Element->UMTS
Priority
Mapping
Logical Function
Relationship
Configuration->DPI
GUI: Managed
Node->DPI
Basic
Element->UMTS
Priority
Mapping
Logical Function
Relationship
Configuration->DPI
GUI: Managed
Node->DPI
Basic
Element->UMTS
Priority
Mapping
Logical Function
Relationship
GUI:
Managed
Configuration->DPI
Element->UMTS
Node->DPI Basic
Logical
Function
Priority Mapping
>PLMN Relating
>Dynamic Radio
Element->UMTS
Bearer
Logical Control
Function
Information
of DPI
>PLMN Relating
>Dynamic Radio
Element->UMTS
Bearer
Logical Control
Function
Information
of DPI
>PLMN Relating
Configuration>Dynamic
Radio
GUI:
Managed
Bearer
Control
Element->UMTS
Information
of DPI
Logical Function
Service
ConfigurationGUI:
Managed
>Global
Information
Element->UMTS
>CS/PSFunction
Pool
ConfigurationRouting Function
>Global Information
>CS/PS
Pool
Element->UMTS
Routing
FunctionLogical Function
>Configuration
Configuration- of
IDNNS
to
>Globalroute
Information
Cs/Ps
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IDNNS route
to
>Global
Information
Cs/Ps
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IDNNS route
to
>Global
Information
Cs/Ps
Pool
Configuration>CS/PS Pool
Routing Function>Configuration of
IDNNS route to
Cs/Ps Pool
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IDNNS
to
>Globalroute
Information
Cs/Ps Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IMSI
route
to Cs/Ps
>Global
Information
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IMSI
route
to Cs/Ps
>Global
Information
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IMSI
route
to Cs/Ps
>Global
Information
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IMSI
route
to Cs/Ps
>Global
Information
Pool
>CS/PS
Pool
Element->UMTS
Routing
>Configuration
Configuration- of
IMSI
route
to Cs/Ps
>Global
Information
Pool
ConfigurationGUI:
Managed
>CS/PS
Pool
Element->UMTS
Routing FunctionLogical
Functionof
>Configuration
ConfigurationIMSI route to Cs/Ps
>UTRAN
CellPool
>Adjacent
Relation
GUI: Managed
>Eutran
Logical Function
Neighbouring
Configuration-Cell
Black
ListCell>UTRAN
>Adjacent
Relation
GUI: Managed
>Eutran
Logical Function
Neighbouring
Configuration-Cell
Black
ListCell>UTRAN
>Adjacent
Relation
GUI: Managed
>Eutran
Logical Function
Neighbouring
Configuration-Cell
Black
ListCell>UTRAN
>Adjacent
Relation
GUI: Managed
>Eutran
Logical Function
Neighbouring
Configuration-Cell
Black
ListCell>UTRAN
>Adjacent Relation
Configuration>Eutran
Neighbouring Cell
Black List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
ConfigurationGUI:
Managed
>Eutran
Element->UMTS
Neighbouring Cell
Logical
Function
Black List
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
for
Black List
Element->UMTS
Logical Function
Configuration->Imei
for Black List
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
TAC
List for SPID
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
TAC
List for SPID
Element->UMTS
Logical Function
Configuration->Imei
GUI: Managed
TAC
List for SPID
Element->UMTS
Logical Function
GUI:
Managed
Configuration->Imei
Element->UMTS
TAC List for SPID
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
Priority When UE in
Dedicated State
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
GUI: Managed
Element->UMTS
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
Configuration->RAN
GUI:
Managed
Priority
When UE in
Element->UMTS
Dedicated
State
Logical Function
GUI:
Managed
Configuration->RAN
Element->UMTS
Priority When UE in
Logical
Function
Dedicated
State
Configuration->HSGUI: Managed
PDSCH
Element->UMTS
Measurement
Power
Logical Function
Offset
Profile
ConfigurationGUI:
Managed
>Service
Element->UMTS
Configuration->HSLogical
PDSCHFunction
ConfigurationMeasurement Power
>Service
Offset Profile
Configuration->HSGUI: Managed
PDSCH
Element->UMTS
Measurement
Power
Logical
Function
Offset
Profile->HSConfigurationPDSCH
>Service
Measurement
Power
Configuration->HSGUI:
Managed
Offset
Configuration
PDSCH
Element->UMTS
Measurement
Power
Logical
Function
Offset
>Service
Measurement
Power
Managed
Offset
Configuration
PDSCH
Element->UMTS
Measurement
Power
Logical
Function
Offset
>Service
Measurement
Power
Managed
Offset
Configuration
PDSCH
Element->UMTS
Measurement
Power
Logical
Function
Offset
>Service
Measurement
Power
Configuration->HSOffset
Configuration
PDSCH
Measurement Power
Offset Profile->HSPDSCH
Measurement Power
Offset Configuration
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A
Versions earlier
than V4.12.10.08
(V3.12.10.08)
N/A

ZXUR 9000 UMTS (V4.12.10) Radio Netk Controller Radio Paramenter Reference - 522769

Hochgeladen von

Dokumentinformationen

Originaltitel

Copyright

Verfügbare Formate

Dieses Dokument teilen

Dokument teilen oder einbetten

Freigabeoptionen

Stufen Sie dieses Dokument als nützlich ein?

Sind diese Inhalte unangemessen?

Copyright:

Verfügbare Formate

ZXUR 9000 UMTS (V4.12.10) Radio Netk Controller Radio Paramenter Reference - 522769

Hochgeladen von

Copyright:

Verfügbare Formate

Operator

ZXUR 9000 UMTS Radio Parameter

Column Name In Radio Network

Managed object class the parameters belongs to.

Parameter Name defined in Managed Object

Parameter name which is defined in 3GPP

Indication which 3GPP protocol defines the parameter

OMC GUI name of the parameter

A brief introduction of the parameter

The instance for which the parameter is configured.

The Feature Guide Doc in which the parameter is introduced

Value Range and Step

The value range and step of the parameter

The value unit of the parameter

The related parameters

Restriction with Related Parameters

Define the relationship with the related parameters

The parameter is divided into the following four category:

Indication whether the parameter is a switch parameter

ZTE Confidential Proprietary

Default Value Configuration Reason

The reason for the default value setting

Change take effect

Service or node impact

Equipment Impaction Level

Service Impaction Level

OMC Access path

Path for how to Access the parameter in OMC

Parameter Modifying Version

Whether this parameter is modified in this version

Parameter Modifying Detail

Modification details of this parameter in this version

UMTS Logical Function Configuration

Extended Info of RNC

Qos Basic Configuration

Scheduling Priority Mapping

Scheduling Priority Mapping

Application Priority Mapping

Application Priority Mapping

Access Control Profile Related to Basic

Access Control Related to Basic Priority

Transport Bearer Type Profile Related

Transport Bearer Type Related to Basic

Dedicated Service Transport Bearer

Dedicated Service Transport Bearer

Plmn Specific Function

Basic Priority Mapping Relationship

Dynamic Radio Bearer Control

Handover Configuration Based on

Iu Interface Timers and Constants

CN NAS System Information

Logic RNC Configuration

Logic Cell Configuration

Logic Iub Link Configuration

Qos Configuration Related to Logical Iur

MBMS Service Area Configuration

MBMS Preferred Frequency Layer

MBMS Non Preferred Frequency Layer

LAC and SNAC Information

Common EDCH Configuration

Dynamic Radio Bearer Control

Dynamic Radio Bearer Control

DPI Basic Priority Mapping Relationship