Sie sind auf Seite 1von 5

JOB RESPONSIBILITY :

Post Processing of 3G drive data on TEMS & Actix for problem analysis (Coverage, Call Drops and Call
Setup Fails), recommendation for physical parameter change.
Responsible for reducing congestion and drops, improving the IRAT Handover, Soft Handover, Location
Update, Paging, CSSR, RRC Connection & RAB Establishment Success rate in his designated area for
all Voice, Video Packet & High Speed, issuing capacity requests whenever needed.
Detailed log file analysis for the parameters such RSCP, Ec/Io, Rx Power, Tx Power, P-SC, RLC
Throughput and analyzing reasons for CSSR, Call Drop, HSDPA call drop, Low DL/UL Throughput
HSDPA and HSUPA testing and optimization recommendation.3G-3G and IRAT Handovers parameters,
cell re-selection parameters.
Post Processing of 3G drive data on Actix for problem analysis (Coverage, Call Drops and Call Setup
Fails), recommendation for physical parameter change.
Parameters optimization both BSC/RNC & Cell Level.
Parameter in-consistency check.
Daily Upload Dump on path & raised PCR as customer requirement.
Align the entire new site accordingly to given template.
Analyzing reports (Service session, Accessibility, Retainability, Mobility and Integrity).
Analyzing daily Cell wise & BSC wise KPIs Reports for NBH & BBH Hour , and observing key network
parameters such as SDCCH blocking, TCH blocking , TCH drop, SDCCH drop etc , and many more
related to optimization of the network.
Daily Checking Locked sites or TRX & Alarm( Dip Alarm,CF Fault)& Resolved on Daily basis.
Optimization based on Interference, Traffic and Customer Complain Analysis.
Recommend and implement changes in various parameters like DYMA, IHOSICH, ACSTATE,
CLSSTATE.
Involved in Roll out activity for 2G & 3G.Preapare Site data base for 2G & 3G.
Improvement & monitoring network performance by study and analysis BSS statistics & optimization of
parameters.
Coordinating With Drive test Engineers.
Drive analysis of various statistical parameters like Call setup success rate,Handover success rate,
handover failure rate, Drop calls rate, and FER.
Hand over statistics, SDCCH, TCH Congestion/ Blockings & RACH etc and their reasons on day-to-day
basis and resolving the problems by taking necessary actions on it.
Maintaining Network KPIs like Call success rate, Drop Call Rate, Handover Success Rate,
Handover Failure Rate within the targeted Range.

Monitoring NPI statistics and optimizing the same.


Add new counters in standard BO-XI template as required for KPIs Analysis Purpose.
Optimize system performance based on field test data and translations report,
Recommended parameter and system changes to meet system performance objective
Optimization of coverage, quality and capacity by antenna optimization, missing
Neighbors elimination.
Daily Monitoring Mapa KPIs.
PROFESSIONAL EXPERIENCE
Currently I am working in Samax telecom pvt ltd on NSN India Pvt Ltd project in NPO Department as
aRNO Engineer from December 2013 to Till Date. I have worked for Ericsson India Pvt Ltd 5.5 years
(July-08 to Nov-13) My total experience in Telecom is 5.8 years.
Previous Employer :
Telecom Infrastructure Consultancy Services Pvt Ltd(August12 To Nov2013)
Designation: R.F Optimizer
Location: MEERUT (U.P.)
Previous Employer
TNS Telecom Network Solution (June'12 and July12)
Designation: R.F Optimizer
Location: MEERUT (U.P.)
Niscom Tele Infra Pvt Ltd (Oct'11 to May12)
Designation: Engineer First Level Assurance
Location: MEERUT (U.P.)
Air Network Solution PVT. LTD. (Jun'08 to Sep11)
Designation: Engineer First Level Assurance
Location: MEERUT (U.P.)
TOOL USED
NSN Tools:
Netact Plan Editor 4.8.1
BTS Site Manager
Darwin
Daisy
Actix
Wire shark
Google Earth
Ericsson Tools:
RNO
OPS
RPMO
Win foil
ESPA for analyzing KPI
Citrix

Remedy
MCOM 4.2
MAP INFO 9.0
Google Earth
BO Tool XI,R1/R2/R3
KEY SKILLS
2G,3G RF Optimization
2G, 3G Database creation & database maintenance (parameter audit
and changes accordingly).
Creating Macro in Excel & access as required.
Creating Bo-XI templates
KPI Analysis & improved KPIs by Parameter Tuning.
Good hand on Excel
PROFESSIONAL QUALIFICATION
B.Tech. in Electronics & Communication Engineering from Chandigarh Group of College affiliated From
P.T.U with 68.35%.

Work Experience

2G,3G RF Optimizer
Samax Telecom pvt ltd
Chennai, Tamil Nadu
December 2013 to Present
Responsibilities
Vodafone ( NSN-Albania)Project
Job Profile1: WCDMA/UMTS RF Optimization Skills
Knowledge of RF Parameters, Neighbor list optimization, Pilot pollution, CE, ISHO feature.
Analysis of 3G KPIs ,Accessibility, Retainability, Mobility etc. on daily basis
Performing Coverage Analysis, Identified & Optimized Coverage holes based on CPICH Ec/No & RSCP &
PRACH delay report
Optimizing IRAT handovers 3G to 2G and 3G to 3G, 2G to 3G neighbor relations
Performed Drive test presentation of RSCP, HSDPA, Ec/No, UE Tx Power for the final submission to the
customer
Analyzing CSSR,HOSR,DroppedCall,TrafficErlang,Rel99andHSDPAVolume
Responsible for traffic sharing between highly utilized & low utilized cells as far as possible and give the
better solutions
Performed 3G-3G, 3G-2G, 2G-3G Neighbor audit & added missing
Neighbors with respect to Mobility HO reports and RNC database audit for
any Discrepancies
Preparing XMLs for modifications & all RF related activities using Nokia
Net Act Plan Editor
HSDPA and HSUPA testing and optimization recommendation.3G-3G and IRAT Handovers parameters,
cell re-selection parameters
Post Processing of 3G drive data on Actix for problem analysis (Coverage, Call Drops and Call Setup
Fails), recommendation for physical parameter change
Skills Used
2G,3G, RF Optimization

2G, 3G Database creation & database maintenance (parameter audit


and changes accordingly).
Creating Macro in Excel & access as required.
Creating Bo-XI templates
KPI Analysis & improved KPIs by Parameter Tuning.
Good hand on Excel

2G,3G RF Optimizer
Telecom Infrastructure Consultancy Services Pvt Ltd
Meerut, Uttar Pradesh
August 2012 to October 2013
Responsibilities
Analyze daily Cell wise & BSC wise KPIs Reports for NBH & BBH Hour, and observing key network
parameters such as SDCCH blocking, TCH blocking, SDCCH drop, TCH drop etc , and many more
related to optimization of the network
Daily Checking Locked sites or TRX & Alarm ( Dip Alarm,CF Fault)& Resolved on Daily basis.
Optimization based on Interference, Traffic and Customer Complain Analysis.
Improvement & monitoring network performance by study and analysis BSS statistics & optimization of
parameters.
Coordinating With Drive test Engineers
Drive analysis of various statistical parameters like Call setup success rate, Handover success rate,
handover failure rate, Drop calls rate, and FER.
Hand over statistics, SDCCH, TCH Congestion/ Blockings & RACH etc and their reasons on day-to-day
basis and resolving the problems by taking necessary actions on it.
Monitoring NPI statistics and optimizing the same
Optimize system performance based on field test data and translations report,
Recommended parameter and system changes to meet system performance objective
Optimization of coverage, quality and capacity by antenna optimization, missing
Neighbours elimination.
Planning and Migration of sites on the basis of Utilization
Check the discrepancies of created sites in BSC with the help of RL Dump
Making different type of tracker like GIS Data, Site Data Base, and Roll out data based, Sharing Site Data
Base.
New site Drive Testing (Idle and Dedicated mode) and ensuring overall performance of all the sites
including the Selection/Reselection, Handover, Rxlev, Rxqual, TA,C/I, etc.
I was involved in Monthly roll out site declaration & data base prepation for 2G & 3G.
Daily Monitoring Mapa KPIs.
Add new counters in standard BO-XI template as required for KPIs Analysis Purpose.
Prepare the 2G,3G & HVS Actual & MS Kpis signoff for UPW Circle
Skills Used
2G,3G RF Optimization,
2G,3G, RF Optimization
2G, 3G Database creation & database maintenance (parameter audit
and changes accordingly).
Creating Macro in Excel & access as required.
Creating Bo-XI templates
KPI Analysis & improved KPIs by Parameter Tuning.
Good hand on Excel

RF OPTIMIZER

Niscom Tele Infra Pvt Ltd


Delhi, Delhi
October 2011 to July 2012
KEY SKILLS :
Creating Macro in Excel & access, good hand on Excel ,MS.Word & Power Point .Good knowledge in
C,C++ & Eficiently use tools like WinFIOL, OSS, Alex, CSR Online,KPI Analysis & improved KPIs.
JOB DESCRIPTION
RF OPTIMIZATION .
Optimization based on Interference, Traffic and Customer Complain Analysis.
Recommend and implement changes in various parameters.
Optimize system performance based on field test data and translations report,
Recommended parameter and system changes to meet system performance objective
Optimization of coverage, quality and capacity by antenna optimization, missing
Neighbors elimination.
Improvement & monitoring network performance by study and analysis BSS statistics
& optimization of parameters
Drive Test including voice and data for GSM
Drive analysis of various statistical parameters like Call setup success rate,
Handover success rate, handover failure rate, Drop calls rate, and FER.
Analysis of Network performance statistics (KPIs) e.g., Drop Statistics (TCH,SDCCH Drops), Hand over
statistics, SDCCH,TCH Congestion/ Blockings & RACH etc and their reasons on day-to-day basis and
resolving the problems by taking necessary actions on it.
Maintaining Network Call success rate, Drop Call Rate, Handover Success Rate,
Handover Failure Rate within the targeted Range.
Monitoring NPI statistics and optimizing the same

Das könnte Ihnen auch gefallen