Beruflich Dokumente
Kultur Dokumente
Thank you for purchasing the new AXONE 4, we are certain you will be satisfied with our
product, and that it will soon become an indispensible tool in your workshop.
The following provides a quick guide with some simple preliminary instructions to allow you
to begin using your AXONE 4.
en
SUMMARY
1 AXONE 4.............................................................................................5
2 MULTIFUNCTION KEY.......................................................................6
2.1 Navigating between Screens..................................................................7
2.2 Shutdown Menu.....................................................................................8
2.3 On-Screen Keyboard............................................................................10
2.4 Control Panel........................................................................................15
3 BATTERY STATUS..........................................................................17
4 TOUCHSCREEN..............................................................................18
4.1 Browse the screens..............................................................................18
4.2 Touchscreen Calibration......................................................................19
6 IMPORTANT NOTE..........................................................................23
en
1.
2.
3.
4.
5.
Status LED
POWER button
Touchscreen
Multifunction key
Power supply connector
Some specific software functions for AXONE 4 can be started using the
multifunction key.
2 MULTIFUNCTION KEY
The key's function changes according to how it is pressed:
SINGLE
CLICK
The
multifunction
key is pressed
quickly.
DOUBLE
CLICK
Two
single
clicks in quick Viewing the on-screen keyboard.
succession.
LONG
CLICK
The
multifunction
key is pressed Viewing the Control Panel.
for more than 3
seconds.
software
en
Pressing the multifunction key (single click) when in the DESKTOP screen
causes the shutdown menu to appear.
en
on the
Only use the procedure described to turn off the display unit, other
methods could damage the unit.
10
on
en
Numeric Mode:
on the touchscreen.
on the touchscreen.
11
Viewing Symbols:
12
on the touchscreen.
on the touchscreen.
on the touchscreen.
NOTE
In some screens the keyboard may cover the icons of the selected function.
13
en
Touch the touchscreen and drag the screen upward to display the area hidden
from the keyboard.
14
en
Hold down the multifunction key (long click) until the touchscreen calibration
screen appears.
16
en
3 BATTERY STATUS
You can check the battery status from the Control Panel (see above) or directly
from the DESKTOP.
View the software DESKTOP screen.
Click on
on the touchscreen.
Start the Control panel to know the status of the single batteries.
17
4 TOUCHSCREEN
All the software functions can be selected and started using the touchscreen.
18
en
on the touchscreen.
19
Click on
on the touchscreen.
20
To calibrate the touchscreen correctly you must press the red dot
inside the target as precisely as possible and hold the stylus pen
in place until the target moves.
21
en
Hold down the POWER button until the green LED lights up.
Wait for the software to start up and the DESKTOP screen to appear.
5.2 Standby
The AXONE 4 turns off automatically when not in use and not
communicating with peripheral devices.
After the screen has been turned off, if not used for a prolonged period of
time, the display unit will automatically place itself in standby.
To reactivate the display unit press the multifunction key (single click).
To take the display unit out of standby mode press the multifunction key (single
click).
Only use the procedure described to turn off the display unit, other
methods could damage the unit.
22
en
6 IMPORTANT NOTE
The present document should be considered as a quick guide.
Reading this guide in no way replaces a full reading of the product
manual or the software manual.
23