Beruflich Dokumente
Kultur Dokumente
1
Follow these steps to setup Staff or Students Wireless Network on Microsoft Windows 8 or 8.1:
(Make sure Wi-Fi is turned ON in your Laptop)
1. Open Control Panel. Then change "View by: to Large icons so the Icons will appear as below.
2. Open "Network and Sharing Center". Select "Set up a new connection or network"
3. When the dialog box opens select "Manually connect to a wireless network" and click next.
4. The "Manually connect to a wireless network" dialog box appears. Make the following entries in
that box.
a. Enter "staff" or students as the "Network name".
b. Select "WPA2-Enterprise" as the "Security type".
c. Select "AES" as the "Encryption type".
The dialog box will look like:
5. Click Next.
6. When the following dialog box appears, click on "Change connection settings".
7. The "staff or students Wireless Network Properties" dialog box will appear.
8. Click on the "Security" tab. Verify that the dialog box looks like the one below. Make
appropriate changes if required.
10. Make sure the "Verify the server's identity by validating the certificate" and Enable Fast
Reconnect is not checked. Click the "Configure..." button.
12. Click "OK" three times to complete the changes. The "Manually connect to a wireless network"
dialog box will appear and will indicate that staff or students has been successfully added.
15. Go to the lower right corner of the Start screen. Click there to display the charms then select
"Settings".
17. The list of available wireless networks will appear. Staff or Students is the preferred secure
wireless network to use. Click staff or students.
20. You may have to repeat the authentication process (steps 21 through 23) as many as four times
to make the connection work correctly.
21. Look at the Wireless Network settings to verify the connection is completed.
Note: If you are unable to connect or having any queries, please contact CATS Department.