Beruflich Dokumente
Kultur Dokumente
Product Description
A CableServ Amplifier Upgrade expands the
bandwidth of your existing amplifiers, while retaining
amplifier spacing. These two factors combine to allow
cable operators to gain additional bandwidth, but at
the fraction of the cost of purchasing and installing
new amplifiers.
CableServ has applied this cost saving formula
to 450 and 550 MHz SX Series Trunk Amplifiers,
increasing the bandwidth up to 625 or 750 MHz
without requiring a change in amplifier spacing*.
The 625MHz bandwidth upgrades features the
necessary modifications coupled with our 650 MHz
Twin Pad EQ for easy set-up utilizing a standard SXP
Pad.
The 750MHz bandwidth upgrades features a new
trunk and bridger board utilizing modern design and
GaAs Technology.
The upgrade of the cable systems amplifiers is
performed at CableServs facility by a skilled team of
CATV technicians equipped with state-of-the art
Network Analyzers. CableServ provides field
engineering support and services to facilitate the
implementation of our forward path upgrade
products.
*A system survey is required in order to determine
the maximum bandwidth that is achievable in relation
to existing amplifier spacing.
Applications
Product Features
Product Specifications
PRODUCT MODEL: UPG GI 550MHZ SX-STATION 5-40/750 GAAS
PARAMETER
Technology
Passband
Flatness
Typical Operating
Gain @ 750 MHz
Noise Figure
Output Level
(55/550/750)
Channel Loading
Distortions (@
Rated Output Level)
CTB
CSO
Return Loss
Current DC max
(Measured @ +24
VDC)
AC Current
consumption @
60VAC
AC Current
consumption @
50VAC
AC Current
consumption @
45VAC
Notes
Units
Trunk
Bridger
XRM
MHz
+/-dB
dB
GaAs PHD
53-750
0.4
31
GaAs PHD
53-750
0.7
37
Hybrid
5-40
0.75
16
2
3
dB
dB
34/40.5/42
38/47/48
8.5
45
78
78
80
73
-16
65
63
-16
2005
76
68
-16
dB
dB
dB
mA
mA
890
mA
1025
mA
1150
2.
3.
Spacing @ highest frequency @ 20C with equalizer installed. Bridger spacing includes the trunk
module gain 9dB Bridger pad and 1 way feedermaker installed; reverse spacing includes losses due
to housing, filters, and return combiner.
Specified with I/P EQ installed. For bridger, NF is measured at the trunk input.
Specifies RF levels into station at housing connectors.
Order Information
PRODUCT MODEL
UPG GI SXTA 550 TO 750MHZ
UPG GI SXBA 550 TO 750MHZ
UPG GI 550 SX TRKBRG 5-40/625 HI 10
CEL GI XRM40C 40 REV AMP (X/SX)
ORDER NUMBER
824-004-202-0CE
824-004-400-0CE
824-003-201-0CE
824-001-300-0CE
CableServ Inc.
4560 Eastgate Parkway
Mississauga, Ontario, Canada L4W 3W6
Telephone: (905)629-1111
Fax: (905)629-1115
Toll Free: 800-668-2033
E-mail to: inquiries@cableserv.com
Visit us at www.cableserv.com
11-10-04-09-51-18
Printed in Canada