Beruflich Dokumente
Kultur Dokumente
C7884 series
High-precision driver circuit for current-output type NMOS linear image sensor
C7884
C7884 series is a driver circuit specifically designed for the Hamamatsu current-output type NMOS linear image sensors (S3901 to S3904 series,
S8380/S8381 series). NMOS linear image sensors are self-scanning photodiode arrays integrated with a scanning circuit of N-channel MOS
transistors.
C7884 series supplies start pulses and 2-phase clock pulses necessary for image sensor operation. C7884 series also includes a signal
processing circuit to read out video signals from an image sensor in the electric charge accumulation mode.
C7884 series operates by input of a master start pulse, master clock pulse and connection to double power supply (12 V or 15 V).
C7884-20 and C7884-21 are multichannel detector heads incorporating driver circuit (C7884, C7884-01) developed for Hamamatsu NMOS linear
image sensor. C7884-20 and C7884-21 are designed especially for compactness, having an overall length as short as 40 mm or less. The
housing case also provides a shielding effect against external noise. As useful options, peripheral devices are available for driving C7884-20 and
C7884-21, and for the output signal processing.
Features
Selection guide
Type No.
Product name
C7884
Driver circuit
C7884G
C7884-01
C7884G-01
C7884-20
C7884-21
Feature
High precision driver circuit for current-output type NMOS linear
image sensors.
Has no input/output connector.
A dedicated pulse generator is pre-mounted on C7884 driver circuit
board.
Has no input/output connector.
Low noise driver circuit for current-output type NMOS linear image
sensors.
Has no input/output connector.
A dedicated pulse generator is pre-mounted on C7884-01 driver
circuit board.
Has no input/output connector.
C7884 driver circuit board is installed in a shield case.
C7884-01 driver circuit board is installed in a shield case.
Note)
1: Standard input/output connector is FAP-16-07#2 (made by Yamaichi, sold separately). Equivalent connectors are available
from other manufacturers.
2: Custom products with an input/output connector pre-mounted are available on request. Please consult our sales office.
3: When ordering along with a dedicated cable (A8226), C7884 series will be shipped with a mating connector pre-mounted.
4: We welcome custom requests (e.g. different supply voltage or gain). Feel free to contact our sales office.
5: When high-speed measurements are required, refer to C7883 series data sheet.
6: When using voltage-output type NMOS linear image sensors, refer to C7885 series data sheet.
C7884 series
Min.
+11.5
+11.5
-
Typ.
+12.0
+12.0
30
10
60
10
20
10
45
10
30
10
20
10
Max.
+15.5
+15.5
40
20
80
20
30
20
60
20
40
20
30
20
Unit
V
V
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
MHz
500
kHz
62.5
kHz
0.3
0 to +50 *
-10 to +60 *
V/pC
C
C
* No condensation
Timing chart
MASTER CLOCK CLK
MASTER START Start
START
st
CLOCK
CLOCK
1
2
RESET
CLAMP
Trigger
VIDEO OUTPUT Data Video
END OF SCAN EOS
KACCC0119EA
C7884 series
C7884G, C7884G-01
(4 ) C3
(4 ) C3
63.5
2
1
1.6
63.5
10.0
1.6
16
15
25.4
(2 ) 3.6
25.4
7.62
50.8
7.62
(2 ) 3.6
7.62
7.62
7.62
7.62
55.88
55.88
KACCA0086EA
Terminal No.
1
2
3
4
5
6
7
8
9
Terminal name
A. GND
+12 V or +15 V
A. GND
-12 V or -15 V
A. GND
Data Video
A. GND
A. GND
D. GND
10
EOS
11
12
13
D. GND
Trigger
D. GND
14
CLK
15
D. GND
16
Start
KACCA0106EA
Description
Analog ground
Power supply
Analog ground
Power supply
Analog ground
Analog video signal output; positive polarity
Analog ground
Analog ground
Digital ground
Digital output signal indicating end of scan; negative logic
Digital ground
Digital output signal for A/D conversion; positive logic
Digital ground
Digital input signal for operating the circuit at the rising edge (in case of
C7884G, C7884G-01, output signal)
Digital ground
Digital input signal for initializing the circuit; positive logic. (in case of
C7884G, C7884G-01, output signal)
Interval of these pulses equals the integration time of the sensor.
C7884 series
C7884-20/-21
(4 ) C7
75.0 0.2
14.0 0.2
(8 ) R3
ON
65.0 0.1
D-SUB 15 PIN
SOCKET TYPE
14.0
75.0 0.2
45.
OFF
TRIG GATE
C7884-20
VR1
VR2
90PCD
(4 ) 3.5 PIERCE
(2 ) M3 PIERCE
46.0
KACCA0153EA
Terminal No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Terminal name
NC
Data video
+12 V (+15 V)
-12 V (-15 V)
NC
Start
CLK
EOS
A. GND
A. GND
Shield
D. GND
D. GND
D. GND
Trigger
Description
No connection
Analog video signal output; positive polarity
Positive power supply
Negative power supply
No connection
Digital input signal for initializing the current; positive logic
Digital input signal for operating the circuit at the rising edge
Digital output signal indicating end of scan; negative logic
Analog ground
Analog ground
Case shield
Digital ground
Digital ground
Digital ground
Digital output signal for A/D conversion; positive logic
Pin assignment of Signal I/O connector (C7884-20/-21, 15 pin D-sub socket type)
15
14
13
12
11
10
KACCC0069EA
Dedicated cable
A8226
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2004 Hamamatsu Photonics K.K.