Beruflich Dokumente
Kultur Dokumente
1 connecting to Ad
Hoc networks
Windows 8.1 IT Pro
>
Windows 8.1 Networking
Question
0
Sign in to vote
Windows 8.1 has not allowed seeing/connecting to ad hoc networks. How to fix it?
Wednesday, July 03, 2013 4:05 PM
Reply
|
Quote
Paulo FM
40 Points
Answers
14
Sign in to vote
It turns out that Windows 8.1 doesn't show ad-hoc networks and it's by design. Not
sure what on earth made them add this change.
Anyway, after a lot of digging, I was finally able to force it to connect. I compiled a
small howto.
Note, this is NOT about how to create an ad-hoc network to share your Internet
connection with another device! It's about how to connect your Windows 8.1 PC to an
existing ad-hoc network created on another device.
SETUP
This must be done once per network.
go to "Network and Sharing Center"
click "Set up a new connection or network"
double click "Manually connect to a wireless network"
enter the SSID of the ad-hoc network (as shown by "netsh wlan show
networks") into the "Network name" field
o
configure security settings accordingly
o
uncheck "Start this connection automatically" (important)
o
click "Next", then "Close"
Run this command (important):
o
o
o
o
CONNECT
After setting up, run this command whenever you want to connect:
> netsh wlan connect <ssid>
Replace <ssid> with the SSID of your network.
Hovering over WiFi icon in system tray will show the name of the network that you are
currently connected to, even if it's an ad-hoc network (the network picker will not show
it if it's ad-hoc). The name is also visible in "Network and Sharing Center" window.
DISCONNECT
To disconnect from the ad-hoc network: connect to a different network, turn off wifi, or
run this command:
> netsh wlan disconnect
CLEANUP
To remove the network profile from Windows, run this command:
> netsh wlan delete profile <ssid>
Replace <ssid> with the SSID of your network.
o
o
o
y4k
85 Points
All replies
1
Sign in to vote
Hi,
Try to update or reinstall the NIC card on your machine for test.
Leo Huang
TechNet Community Support
o
o
Leo Huang
Microsoft
(MSFT CSG)
27,615 Points
Moderator
3
Sign in to vote
This solution not work for me. My wireles device is intel centrino N-2230, it is show me
a star(* available connections) but, when i click connection list, isnt show me any
connection.
Friday, November 01, 2013 2:13 PM
Reply
|
Quote
mer Faruk GL
15 Points
14
Sign in to vote
It turns out that Windows 8.1 doesn't show ad-hoc networks and it's by design. Not
sure what on earth made them add this change.
Anyway, after a lot of digging, I was finally able to force it to connect. I compiled a
small howto.
Note, this is NOT about how to create an ad-hoc network to share your Internet
connection with another device! It's about how to connect your Windows 8.1 PC to an
existing ad-hoc network created on another device.
CONNECT
After setting up, run this command whenever you want to connect:
> netsh wlan connect <ssid>
Replace <ssid> with the SSID of your network.
Hovering over WiFi icon in system tray will show the name of the network that you are
currently connected to, even if it's an ad-hoc network (the network picker will not show
it if it's ad-hoc). The name is also visible in "Network and Sharing Center" window.
DISCONNECT
To disconnect from the ad-hoc network: connect to a different network, turn off wifi, or
run this command:
> netsh wlan disconnect
CLEANUP
To remove the network profile from Windows, run this command:
> netsh wlan delete profile <ssid>
Replace <ssid> with the SSID of your network.
Edited by y4k Sunday, November 03, 2013 11:38 PM
Proposed as answer by EEStud Monday, December 09, 2013 2:30 AM
Marked as answer by David WoltersModerator Friday, March 21, 2014 3:13 PM
o
o
o
y4k
85 Points
4
Sign in to vote
Yashindya
25 Points
4
Sign in to vote
Agreed.
However, we work with home automation, and some Global Cache products (which are
very popular) require Adhoc for initial configuration.
So, this "improvement" to Windows is actually going to cost us a lot of money and time
wasted on Support.
Seeing as the windows stack still supports Adhoc anyway, it might make sense to
prevent the creation of Adhoc networks on GUI to encourage people to migrate, but
there is no good reason for blocking viewing of adhoc networks by GUI.
It's particularly rediculous because Microsoft didn't exactly visibly depreciate the use of
the protocol, which makes me wonder if there is a serious security flaw with Microsoft's
Adhoc implementation (which is the only reason I could think of why they would do
this, otherwise, its simply an incredibly stupid mistake)
Wednesday, November 13, 2013 3:02 AM
Reply
|
Quote
AndrewLuecke
40 Points
0
Sign in to vote
when i try to set connectiontype =IBSS it brings me help screen with error one or more
parameters for the command are not correct or missing . I am using windows surface
tablet Gen1 . But if i set nonbroadcast=yes , then i am able to see the ssid in my
wireless GUI ,still wont connect though
I also tried to create profile usind xml file and forcing ConnectionType=IBSS , ut after
successful creation still shows Connectiontype as ESS
skumar19
0 Points
1
Sign in to vote
Aideal Ryder
0
Sign in to vote
You are a boss. After upgrading to windows 8.1 I could no longer print wirelessly
because my SSID was not displayed. In addition, using netsh wouldn't even allow me
to connect. Turns out that the printer profile still existed so during the upgrade it
stayed. Then I tried netsh wlan connect <> interface=<> and it wouldn't connect.
Did exactly what you said and it works! Thanks.
Monday, December 09, 2013 2:30 AM
Reply
|
Quote
EEStud
30 Points
3
Sign in to vote
I have been a huge supporters of windows and I upgraded to windows 8.1 and cannot
connect to ad-hoc networks so therefore I cannot print wirelessly anymore. You should
be ashamed to even think of marking this as an answer Leo. Seriously, if you half the
techie you think you are, you shouldn't have even posted this. Anyone who is trying to
connect to an ad-hoc network knows to update their drivers. Seriously, take this
complaint to your boss because there are so many people with this same issue. Or,
even better, reply to this with the update number that I can run on windows 8.1 to fix
this non-sense issue.
Monday, December 09, 2013 2:33 AM
Reply
|
Quote
EEStud
30 Points
2
Sign in to vote
EEStud
30 Points
1
Sign in to vote
y4k
85 Points
0
Sign in to vote
I have an asus vivotab me400 tablet running on win 8. It can see ad hoc networks but
can not connect to them.
When I try to connect it says it is verifying but it just timesout. The device that is
transmitting the wifi says it's connected but my win 8 tablet does not connect.
Will I be able to use this tweek to connect with on a win 8? thanks
Reply
|
Quote
kcaegis45
0 Points
0
Sign in to vote
Thanks for this ..I tried a lot of other things.. took me a while to find your post... was
really important to my company .. can't thank you enough.
Monday, February 17, 2014 7:35 AM
Reply
|
Quote
QA_Greg
0 Points
0
Sign in to vote
This solution not work for me. My wireles device is intel centrino N-2230, it is show me
a star(* available connections) but, when i click connection list, isnt show me any
connection.
me too. any solution? I need urgent help as I cannot get my Dell Tab online.
Tuesday, March 25, 2014 7:58 AM
Reply
|
Quote
patrickngai
0 Points
0
Sign in to vote
It's not working for me. I dont see the created ad hoc anywhere not even in
the "Network and Sharing Center" window. please help me out.
Tuesday, April 08, 2014 10:01 AM
Reply
|
Quote
Osei Kwadjoe
0 Points
0
Sign in to vote
If I follow your steps describing how to connect to an ad-hoc network but choos a SSID
that is not already in use it also works and by doing so I seem to have created an adhoc network which others can than you.
Wednesday, April 09, 2014 2:40 PM
Reply
|
Quote
a68.85.83
5 Points
0
Sign in to vote
y4k when i run the command "netsh wlan connect <ssid> i get that the syntax is
incorrect and i'm sure that i'm typing it right with the name of the ssid. what should I
do?
Monday, May 19, 2014 7:25 PM
Reply
|
Quote
HousamAssoum
0 Points
0
Sign in to vote
Earlier I had tried the longer route through CMD mentioned in the chains of responses
here, but the WiFi network used to drop put very frequently. So I sticked with the WiFi
Dongle solution instead.
Recently, I again tried to connect to the Ad-Hoc network hoping that some recent
Windows Patch would have fixed the problem. Alas the same "Exclamation Mark" in the
taskbar, saying I have limited connection and no link to Internet. Then I ran Network
Diagnostics on the same to see if that brings out something new. The result was a
message saying "DHCP not enabled for your <Wireless LAN Name>". I let the
Diagnostic Tool do an autofix and "Mama Mia", no exclamation mark!!!!!, I am
connected to the Internet now.
I tried restarting and reconnecting and it works fine now.
Let me know if this works for everyone.
Thursday, May 29, 2014 1:00 PM
Reply
|
Quote
Prakash Mathai
0 Points
0
Sign in to vote
_-ViKtOrY-_
0 Points
0
Sign in to vote
Thank you for such a detailed explanation ! I can connect to the ad hoc network I use
to spread Internet (sharing the internet connection) as an ordinary Wi-Fi. But
unfortunately I can't have Internet. Do you have a suggestion that might help ? Thanks
a lot for considering my question !
Friday, August 22, 2014 5:14 PM
Reply
|
Quote
D-Lucas
0 Points
0
Sign in to vote
I realize this is for 8.1 and my question relates to 8, but I can't find anything that even
comes close. I have a Acer running Windows 8 (not pro) and I cannot get the ad-hoc to
work. When I run
> netsh wlan show networks
the network shows, but when I try to replace it, it states that it does not exist. The SSID
also shows in the network list with a triangle along with all the rest on the tablet. The
wireless part of my router has died and I have connected my laptops and printer adhoc while I am waiting for a new router. The tablet does not want to cooperate.
Monday, September 01, 2014 8:02 PM
Reply
|
Quote
rdwray_666
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
http://www.techotimes.com/p/adhoc-network-in-windows-8-and-81-solved.html
Thursday, September 25, 2014 5:33 AM
Reply
|
Quote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Raj Haraniya
0 Points
0
Sign in to vote
Reply
|
Quote
Raj Haraniya
0 Points
0
Sign in to vote
SwAPiN
0 Points
0
Sign in to vote
SwAPiN
0 Points
0
Sign in to vote
Hi,
I had the similar issue after updating to Windows 8.1.
You method worked for me on a dell notebook.
cheers,
P.
Tuesday, December 02, 2014 8:16 PM
Reply
|
Quote
superking2014
0 Points
0
Sign in to vote
So I'm stuck.
I get to: