Beruflich Dokumente
Kultur Dokumente
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches
1005/1005A
Specifications
Temperature Range
Model : 1005
0 -1500C, 0 -1600C, 30 -1500C,
-20 to 1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
Model : 1005A
0 -1500C, 0 -1600C, 30 -1500C,
-20 to 1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Electrical entry
M20 - 3Nos
M20 - 3Nos
Cable Gland
Optional
Optional
Thermometer Pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max. No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote Repeater
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote Repeater 96 Sq
Specifications
Type
Auxillary Supply
90 260V AC/DC
Resolution
0.10C
IP 20
00C to 600C
Signal output
4 sets of 4 - 20mA DC
Optional RS 485
Cutout dimension
92 Sq. mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
5.
b) ML - 1005A:
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
Repeater
If WTI please specify
1005 /1005A
OTI / WTI
R1. 0 - 150C
R2. 0 - 160C
R3. 30 - 150C
R4. -20 to140C
(other ranges on request)
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
Y - Requried
N - Not Required
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirement.
Sample Ordering Information :1005\WTI\R3\S2\L2\C2\U1\Y\........... Amps ...............C
www.precimeasure.com
MODEL - 1005H/1005AH
DIAL TYPE THERMOMETER
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to
the instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master
indication.
Current Converter Unit (CCU) is mounted inside the Local OTI/WTI, The output from which can be
connected to remote indicator or SCADA are a combination of both.
For the WTIs additional Winding temperature simulator is provided
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches
ML : 1005H/1005AH
Specifications
Temperature Range
Model : 1005H
0-1500C, 0-1600C, 30-1500C,
-20 to 1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
Model : 1005AH
0-1500C, 0-1600C, 30-1500C,
-20 to1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Electrical entry
Cable Gland
Optional
Optional
Thermometer Pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote indicator
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote indicator 96 Sq
SPECIFICATIONs
Type
Auxillary Supply
90 260V AC/DC
Resolution
0.10C
IP 20
00C to 600C
Signal output
4 sets of 4 - 20mA DC
Optional RS 485
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
5.
b) ML - 1005AH:
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
1005H/1005AH
OTI / WTI
R1. 0 - 150C
R2. 0 - 160C
R3. 30 - 150C
R4. -20 to140C
(other ranges on request)
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
RI - Remote indicator - T1/T2/T3/T4 (for types, Refer Drawing)
PSU - External power supply with 2 Nos. of 4-20mA output
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1005AH\OTI\R4\S4\L\C6\U4\RI-T2 ........... Amps ...............C
www.precimeasure.com
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded Duplex PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a
master indication.
Current Converter Units (CCUs) are mounted inside the Local OTI/WTI, The output from which can be
connected to remote indicator and SCADA through external power supply units (PSUs).
For the WTIs additional Winding temperature simulator is provided
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches
ML: 1005 HX/1005 AHX
Specifications
Temperature Range
Model : 1005HX
0-1500C, 0-1600C, 30-1500C,
-20 to 1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
Model : 1005AHX
0-1500C, 0-1600C, 30-1500C,
-20 to1400C
150mm (6) Round
2700
10C
1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Electrical entry
Cable Gland
Optional
Optional
Thermometer pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
PSU
Switching Accuracy
Remote indicator
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote Indicator 96 Sq
Power Supply Unit - (PSU)
a.
b.
c.
REMOTE INDICATOR
a
b
d
e
f
g
h
www.precimeasure.com
DIAL TYPE
Precimeasure
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Model
Type of Instrument
Range
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
5.
b) ML - 1005AHX:
15A @250V AC &
0.5A @250V DC
1005HX/1005AHX
OTI / WTI
R1. 0 - 150C
R2. 0 - 160C
R3. 30 - 150C
R4. -20 to140C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For Types, Refer Drawing)
indication / Scada
(Connected through external powersupply PSUs)
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1005AHX\OTI\R4\S4\L\C6\U4\RI-T1........... Amps.............C
www.precimeasure.com
MODEL - 1007
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches
ML : 1007
Specifications
Temperature Range
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote Repeater
Max. Capillary Length
Electrical Connection
Degree of Protection
High Voltage Test
PSU
Model : 1007
0-1500C, 0-1600C, 30-1500C,-20 to 1400C
115mm, Segment Dial
600
20C
1.5% of FSD
4
15% - 85%
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
S1 & S2: 3C to 9C (630C) Fixed
S3 & S4: 8C to 400C Adjustable.
2.5 0C of Set Value
Available (Potentiometer Output)
Up to 25 Mtrs.
Press Fit Wago Type
IP 55 (IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1 minute; all Terminals
to ground
Electrical entry
M20 - 3Nos
Cable Gland
Optional
Thermometer Pocket
Optional
Remote Repeater 96 Sq
Power Supply Unit - (PSU)
a.
b.
c.
REMOTE INDICATOR
a
b
d
e
f
g
h
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
5.
Ordering Information
Model
Type of Instrument
Range
1007
OTI / WTI
R1. 0 - 150C
R2. 0 - 160C
R3. 30 - 150C
R4. -20 to140C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
Repeater
Y - Requried,
N - Not Required
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1007\OTI\R3\S2\L2\C8\U5\Y\........... Amps ...............C
www.precimeasure.com
MODEL - 1007H
DIAL TYPE THERMOMETER
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the instruments, and
does not require any trimming or other periodic adjustments.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
Current Converter Unit (CCU) is mounted inside the Local OTI/WTI, The output from which can be connected to remote
indicator or SCADA are a combination of both.
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has anti vibration mountings
and are provided with projection mounting clamps.
ML : 1007H
PSU
Specifications
Temperature Range
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Model : 1007H
0-1500C, 0-1600C, 30-1500C,-20 to 1400C
115mm, Segment Dial
600
20C
1.5% of FSD
Max.No. of Switches
Switching Range
Contact Rating
4
15% - 85%
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Switch Differential
Switching Accuracy
Remote Indicator
Max. Capillary Length
Electrical Connection
Degree of Protection
High Voltage Test
Electrical entry
Cable Gland
Optional
Thermometer Packet
Optional
Remote Repeater 96 Sq
Power Supply Unit - (PSU)
a.
b.
c.
REMOTE INDICATOR
a
b
d
e
f
g
h
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
5.
Ordering Information
Model
Type of Instrument
Range
1007H
OTI / WTI
R1. 0 - 150C
R2. 0 - 160C
R3. 30 - 150C
R4. -20 to140C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For types, refer Drawing)
indication / Scada
PSU - External power supply with 2 Nos. of 4-20mA output
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1007H\OTI\R3\S2\L2\C8\U5\RI-T4........... Amps ...............C
www.precimeasure.com
MODEL - 1006
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches.
ML : 1006
Specifications
Model : 1006
Temperature Range
0-1500C, 0-2400C
2700
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC,
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Up to 6 Mtrs.
Available
Electrical Connection
Degree of Protection
IP 55(IEC-60529)
www.precimeasure.com
DIAL TYPE
Precimeasure
Ordering Information
Model
Type of Instrument
Range
1006
OTI / WTI
R1. 0 - 150C.
R2. 0 - 240C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1 BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
If WTI please specify Transformer CT Secondary output
..................(1A to 5A)
Simulated Temperature rise over top oil
........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006\WTI\R1\S2\L2\C5\U5 ........... Amps ...............C
www.precimeasure.com
MODEL - 1006H
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches.
ML : 1006H
Specifications
Model : 1006H
Temperature Range
0-1500C, 0-2400C
2700
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
ML : 2220-R2 (CCU)
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Remote Indicator
Availbale
Up to 6 Mtrs.
Available
Electrical Connection
Degree of Protection
IP 55(IEC-60529)
Terminals Details
(c) CCU
(d) CCU
Remote Indicator 96 Sq
SPECIFICATION
Type
Auxillary Supply
90 260V AC/DC
Resolution
0.10C
IP 20
00C to 600C
Signal output
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
4.
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
1006H
OTI / WTI
R1. 0 - 150C.
R2. 0 - 240C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1 BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: 1) WTI Gradient is factory set. If required customer can adjust as per requirment.
2) External CCU and Remote Indicator is Part of the scheme.
Sample Ordering Information :1006H\WTI\R1\S2\L\C3\U2 ........... Amps ...............C
www.precimeasure.com
MODEL - 1006DH
Winding temperatures Indicator & Controller for Dry Type Transformers / Cast-Resin Transformers with built-in
RTD scheme for Independent Remote indication and 4-20mA DC output for SCADA connection.
Hybrid Instrument
This is a high performance temperature Monitoring instrument with built-in PT-100 Sensor (RTD) & Current
Converter Unit and external Remote indicator with built-in power supply unit
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches
ML : 1006DH
Specifications
Model : 1006DH
Temperature Range
0-2400C
2700
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC,
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Remote Indicator
Availbale
Up to 6 mtrs
Electrical Connection
Degree of Protection
IP 55 (IEC-60529)
2 nos 4-20 mA DC
90-260V AC/DC
Temperature range
0-240C
Degree of protection
IP-40
Temperature range
0-240C
Signal input
4-20 mA DC
90-260V AC/DC
Communication
Degree of protection
IP 20
Cutout Dimension
92 sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
4.
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
1006DH
WTI
R1. 0 - 240C
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006DH\WTI\R1\S2\L\C4
www.precimeasure.com
MODEL - 1006HX
DIAL TYPE THERMOMETER
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded Duplex PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a
master indication.
This output can be connected to Remote Indicator or SCADA or combination of both.
WTI additional Winding temperature simulator is provided.
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches.
ML : 1006HX
Specifications
Model : 1006HX
Temperature Range
0-1500C, 0-2400C
2700
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
PSU
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Remote Indicator
Availbale
Up to 6 Mtrs.
Available
Electrical Connection
Degree of Protection
IP 55(IEC-60529)
Test Voltage
Terminals Details
(c) CCU
(d) CCU
a.
b.
c.
Remote Indicator 96 Sq
REMOTE INDICATOR
a
b
d
e
f
g
h
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
4.
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
1006HX
OTI / WTI
R1. 0 - 150C.
R2. 0 - 240C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1 BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For types, Refer Drawing
indication / Scada
(Connected through external powersupply PSUs)
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006HX\OTI\R2\S2\L\C4\U1\RI-T3 ........... Amps ...............C
www.precimeasure.com
MODEL - 1031
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has anti
vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches.
ML : 1031
Specifications
Model : 1031
Temperature Range
0-1500C
Dial size
600
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Up to 6 Mtrs.
Electrical Connection
Degree of Protection
IP 55(IEC-60529)
www.precimeasure.com
DIAL TYPE
Precimeasure
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
4.
0.5A @ 220V DC
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
1031
OTI / WTI
R1. 0 - 150C.
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1 BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
Transformer CT Secondary output
..................(1A to 5A)
Simulated Temperature rise over top oil
........... (5C to 30C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1031\OTI\R1\S2\L2\C6\U2 ........... Amps ...............C
www.precimeasure.com
MODEL - 1031H
General Features
The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
Instruments are fully compensated for ambient temperature.
The WTI instruments have a built in Thermal imaging system for transformers hot spot indication.
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
A maximum pointer facility is provided, can be reset from outside.
All switch contacts are potential free micro switches.
ML : 1031H
Specifications
Model : 1031H
Temperature Range
0-1500C
Dial Size
600
Dial Graduation
20C
Accuracy Class
1.5% of FSD
Max.No. of Switches
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
ML : 2220-R2 (CCU)
0.5A @ 220V DC
Switch Differential
Switching Accuracy
Remote Indicator
Availbale
Up to 6 Mtrs.
Electrical Connection
Degree of Protection
IP 55(IEC-60529)
Test Voltage
Terminals Details
(c) CCU
(d) CCU
SPECIFICATIONs
Remote Indicator
Type
Auxillary Supply
90 260V AC/DC
Resolution
0.10C
IP 20
00C to 600C
Signal output
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
4.
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
1031H
OTI / WTI
R1. 0 - 150C.
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
U1 - 1/2 BSP Male
U2 - 3/4 BSP Male
U3 - 1 BSP Male
U4 - 1/2 BSP Female
U5 - 3/4 BSP Female
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5C to 30C)
Note: 1) WTI Gradient is factory set. If required customer can adjust as per requirment.
2) External CCU and Remote Indicator is Part of the scheme.
www.precimeasure.com
Precimeasure
BI-METALLIC
Bi-metallic type thermometer consists of Helical Bimetal Coil, which will expand or contract according to the
temperature changes, which in turn operates indicating pointer.
General Features
a
a
a
a
a
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated.
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated.
ML :1071
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
200C 1050C
40C of Set Value
60C30C
Potential Free
Cable Gland Size PG16
2KV AC, 50/60 Hz for 1 Minute, All terminals to ground
www.precimeasure.com
* The WTI instruments have a built in Thermal imaging system for transformers hot
spot indication.
* WTI Gradient calibration is factory set as per customer specification. If required, a
provision is made for small adjustment at site.
ML :1071-WTI
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
200C 1050C
40C of Set Value
60C30C
Potential Free
Cable Gland Size PG11-2Nos
2KV AC, 50Hz for 1 Minute, All terminals to ground
ML :1068
Model 1068 (4" Dial Thermometer With 2 Contact, Horizontal Mounting)
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Round Dial 4
1350
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
400C 1050C
40C of Set Value
60C30C
Potential Free
Cable Gland Size PG16
2KV AC, 50/60 Hz for 1 Minute, All terminals to ground
www.precimeasure.com
Precimeasure
ML :1075
Round Dial 3
2400
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish).
ML :1073 / 1074
Round Dial 4
2400
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish)
Dial
Angular Sweep
Range
Graduation
Round Dial 6
2400
0-1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
Instrument Case
Accuracy
www.precimeasure.com
BI-METALLIC
ML :1078
Round Dial 3
2400
0 -1200C (Other ranges on request)
40C Between 400C & 1100C
20C per division
Instrument Case
ML :1079
Round Dial 3
2400
0 -1200C ( Other ranges on request)
40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish).
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
www.precimeasure.com
Precimeasure
Electronic Temperature
Controllers
MODEL 2241B & 2242 WINDING TEMPERATURE INDICATOR / CONTROLLER FOR DRY TYPE TRANSFORMERS
APPLICATION :
MODEL 2241B/2242/2244T3 is designed for monitoring the temperatures of L.V. windings of the Dry-Type Transformer / Cast Resin
Transformers. It will display winding temperatures and take necessary control action as per set and differential values programmed
by the user. The protection system also records maximum temperatures and will display the same along with corresponding channel
number whenever relevant push button is pressed.
SALIENT FEATURES :
Power line filter with Fuse is incorporated in the input of the power supply to protect the equipment from High Energy Surge
and Electrical Fast Transient.
High Scanning Speed
Remote Indication & Data Acquisition facility with burden upto 600 ohms.
Optional RS-485 MODBUS RTU Communication
Specifications
Temperature Sensor
input
No. of Sensor inputs
No. of Set-points
ML :2241B
Model 2241B
RTD (Pt-100 DIN 43760)
Model 2242
K Type thermocouples
Three
Four (Alarm, Trip, Fan1,
Fan2)
00C 2500C
Range
00C -3000C
10C
Resolution
0.10C
0
0.8%, one count under
Accuracy
1 C
normal conditions.
Display Speed
User Settable (1-99 Seconds)
5 Seconds
Display
Six Nos. 0.5 Seven Segment LEDs Four nos 0.5 Seven Segment LEDs
Auxiliary Supply Voltage 90-260 V AC/DC
0-20V AC or 0-240V AC
Output
Analogue output DC 4-20mA
Analogue O/P DC
(Maximum burden 600 Ohms)
0-1mA (10000 Ohms)
4-20mA(600 Ohms
burden)
Communication
Isolated RS-485 MODBUS RTU
RS-485 & RS-232
Communication (Optional).
Communication
Contact Rating @
5A @ 220 VAC / 5A @ 30 DC
Alarm & Trip 10A@120
Resistive Load
VAC & 8A@240 VAC, Fan1
& Fan2 30A@120/240VAC
Power Consumption
5 Watts
8 Watts
Weight
2Kgs. Approx without packing box 2kgs Approx. without
packing box
Enclosure
Aluminium Pressure Diecasting
Panel Mount thru Cutout
enclosure, powder coated all sides Indoor Mounting only
with acrylic viewing window, IP-55
Temp : -300C to 550C
Operating conditions
Temp:-300C to 700C
ML :2242
Model: 2242
1.
1.
2.
Vibration Test :
2.
Amplitude 1mm,
frequency 50Hz, 1Hr / X,Y,Z axis
Shock Test :
11ms/15g Procedure as per the
IS: 13779 (12 shots)
Vibration Test :
Amplitude 0.5mm,
Frequency 05 to 50Hz,
02 sweeps / X,Y,Z axis
www.precimeasure.com
ELECTRONIC
a
a
a
Electronic Temperature
Controllers
MODEL 2244T3 & 2253 WINDING TEMPERATURE INDICATOR / CONTROLLER FOR DRY TYPE TRANSFORMERS
APPLICATION :
MODEL 2244T3 & 2253 is designed for monitoring the temperatures of L.V. windings of the Dry-Type Transformer / Cast Resin
Transformers. It will display winding temperatures and take necessary control action as per set and differential values programmed
by the user. The protection system also records maximum temperatures and will display the same along with corresponding
channel number whenever relevant push button is pressed.
SALIENT FEATURES :
Power line filter with Fuse is incorporated in the input of the power supply to protect the equipment from High Energy Surge
and Electrical Fast Transient.
a
a
a
ML : 2244T3
specifications
Temperature Sensor input
No. of Sensor inputs
No. of Set-points
Range
Resolution
Accuracy
Display Speed
Display
Auxiliary Supply Voltage
Output
Communication
Contact Rating @ Resistive Load
Power Consumption
Weight
Enclosure
Operating conditions
specifications
Temperature Sensor input
No. of Sensor inputs
No. of Set-points
Range
Resolution
Accuracy
Display Speed
Display
Auxiliary Supply Voltage
Output
Communication
Contact Rating @ Resistive Load
Power Consumption
Weight
Enclosure
Operating conditions
ML : 2253
www.precimeasure.com
Electronic Temperature
Controllers
Precimeasure
SCHEME CONSISTS OF :
1. PT -100 Sensor 1 No. 2. Electronic Temperature Controller 1 No. 3. Thermometer Pocket 1 No. (Optional)
ML : 2243A
Description
Temperature Sensor input
No. of sensor inputs
CT Sec Current Input
Temperature Rise
No. of Set-points OTI
No. of Set-points WTI
Contact Rating
Range
Resolution
Accuracy
Display
Auxiliary Supply Voltage
Signal Outputs
Power Consumption
Weight
Enclosure
2.
Vibration Test :
Amplitude 1mm,
frequency 50Hz, 1Hr / X,Y,Z axis
Communication
Operating Temperature
Model: 2243A
Model 2246
Signal Input
Range
Display
Auxiliary Supply Voltage
Out put
Communication
Power Consumption
Weight
Enclosure
Operating Temperature
Details
RTD (Pt 100 DIN 43760)
ONE
1.0A to 5.0A (User Selectable)
10C to 450C (User Selectable)
Two Relays for Alarm and Trip (1C/O SPDT Relay
contacts)
Four Relays for Alarm, Trip, Fan 1 and Fan 2
(1C/O SPDT Relay contacts)
5A @ 220 VAC / 5A @ 30 VDC Resistive Load
0-1500C
0.10C
10C
0.5 Seven Segment LED Display
90-260 V AC/DC
Two analogue Outputs (4-20mA Suitable for 600
Ohms Burdon) Each 1 No.
5 Watts (Max.)
2 Kgs Approx. without packing
Aluminium Pressure Die Casting enclosure,
powder coated with acrylic viewing window, IP-55
RS-485 MODBUS RTU (Optional)
-300C to 700C
ML : 2246
www.precimeasure.com
ELECTRONIC
SPECIFICATION :
Electronic Temperature
Controllers
ELECTRONIC TYPE
MODEL 2220-R1 & 2220-R2 TEMPERATURE INDICATOR
APPLICATION : PRECIMEASURE Electronic Instruments are designed to indicate
the Top Oil Temperature / Winding Temperature of the oil-immersed transformers
in remote control room. This scheme has 2 Nos of 4-20 mA DC Signal outputs
proportional to the temperature range. Signal OUTPUT 1 is connected to an
indicator for indicating temperature at remote and OUTPUT 2 can be connected
to Recorder or Data Acquisition System.
SCHEME CONSISTS OF :
1.
2.
3.
4.
SPECIFICATIONs :
SL.
1
a.
b.
2
Description
Model 2220 R1
Model 2220 R2
IP-55
Aluminium Casting.
IP-40
ABS, DIN Enclosure Box.
a
b
c
d
e
f
g
www.precimeasure.com
Precimeasure
Model 1080 - 4" & 6"
APPLICATION:
Magnetic Oil Level Gauge (MOG) is used to Measure Oil Level of oil filled Transformers & Oil filled Tanks.
SPECIFICATIONS :
Liquid in Tank
Working Temperature
Working Pressure
0 to 4 Kg / Cm2
Working Environment
Indoor or Outdoor
INDICATION :
Dial size
Angular Sweep
300
Float-Arm Length
Travel
Margin
Type
Micro switch
Contact Rating
OTHERS
SWITCH :
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
Model No
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
Conservator Diameter
1080/4
MODEL: 1090
SIZE: 1 B.S.P MALE
Application:
PRD is a safety device for the distribution transformer up to 5000KVA, OLTC and other similar
equipments. This PRD is used to prevent heavy damages of the tank in case of sudden rise of
internal pressure.
operating Pressure :
Operating Pressure range available from 0.2 to 0.7 kg/sq.cm with tolerance
0.05 kg/sq.cm.
General Features
Safe spring loaded design that does not require external power supply for operation
Positive downward directional flow limits horizontal spraying of hot oil on adjacent equipment
Large diameter top cover with improved operating force providing better protection
Transport safety clip to prevent oil spillage during transportation of oil filled transformers
Available in brass or Zamak body construction
www.precimeasure.com
BEARING / AIR
TEMPERATURE INDICATOR /
CONTROLLER
Precimeasure
Model 1006 - BTD/ATD
APPLICATION :
This Instruments is used for monitoring and controlling the Bearing/ Air Temperature of the Motor and Generators
SPECIFICATIONS :
Temperature Range
Dial Size
270
Dial Graduations
2C per Division
Accuracy Class
1.5% of F.S.D
Switch Setting
15% to 85%
Switch Differential
3 C 2 C (Fixed)
Up to 15 Meters
Mounting
Flush / Projection
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
5A @ 250V AC &
0.5A @ 220V DC
Display Specification
Range
Display
Disply Resolution
0.1C
Temp-Setting
General Specification
System Acuracy
Stability
Approx. 30 Minutes
Stabilization Time
Electrical Specification
Power Consumption
Power Supply
230Vac, 50Hz
Physical Specification
Dimensions
Weight
Heating Media
Oil Volume
Well Depth
160 mm
Accessories
Stirring
www.precimeasure.com
SCHEME
Scheme drawing
Precimeasure
www.precimeasure.com
Scheme drawing
Precimeasure
www.precimeasure.com