Sie sind auf Seite 1von 12

Page 1

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)

Page 1 of 8

CISCO

Close Window

Assessment System

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)

Below you will find the assessment items as presented on the exam as well as the
scoring rules associated with the item.

Use of the exam information in the Exam Viewer is subject to the terms of the
Academy Connection Website Usage Agreement between you

and Cisco. The purpose of the Exam Viewer is to support instruction while not
compromising exam security for other Cisco Networking

Academies or students. This material should not be distributed outside a proctored


and controlled setting. If misuse is found, action will be

taken to limit access to assessment content. Please remember to logout and close
your browser window after using the Exam Viewer.

1 Which two characteristics are determined by the chip set on a motherboard?


(Choose two.)

□ maximum amount of memory that can be installed

□ operating system compatibility

□ type of connectors that will be on the motherboard

[] keyboard layout

Scoring Rule For: correctness of response

1 point for each correct option.

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:

IT Essentials
• 1.4.1 Identify the names, purposes, and characteristics of motherboards

2 Which two activities are normally controlled by the Northbridge part of the chip
set? (Choose two.)

□ communication between the CPU and the I/O ports

[[] access to the RAM

□ communication between the CPU and the hard drive

□ access to the video card

□ communication between the CPU and the sound card

Scoring Rule For: correctness of response

point for each correct option.

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.1 Identify the names, purposes, and characteristics of motherboards

3 Which CPU architecture uses a small set of instructions that are designed to be
executed rapidly?

O CISC

O RAID

O Rise

O Risk

O scsi

Scoring Rule For: correctness of response

0 points for any other option

http://ev-iip.netacad.net/virmoso/deH 9/3/2008

Page 2

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)


Page 2 of 8

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.2 Explain the names, purposes, and characteristics of CPUs

4 Which type of memory is unable to have the contents modified?

O DRAM

Oram

O ROM

O SRAM

Scoring Rule For: correctness of response

0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.4 Identify the names, purposes, and characteristics of ROM and RAM

Which type of memory is primarily used as cache memory?

O DRAM

QRAM

O ROM

O SRAM

Scoring Rule For: correctness of response

0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials
• 1.4.4 Identify the names, purposes, and characteristics of ROM and RAM

Which three devices are considered output devices? (Choose three.)

□ fingerprint scanner

□ headphones

□ keyboard

FJ monitor

_] mouse

□ printer

Scoring Rule For: correctness of response

1 point for each correct option.

0 points if more options are selected than required.

Max Value = 3

ZI

This item references content from the following areas:

IT Essentials

1.7 Identify the names, purposes, and characteristics of output devices

7 Which type of ROM can be reprogrammed with software while it is still physically
installed in the computer?

O EEPROM

O EPROM

O PROM

O ROM

Scoring Rule For: correctness of response

Points T or any other option

1.4.4 Identify the names, purposes, and characteristics of ROM and RAM

Refer to the exhibit. Which type of cable is shown in the graphic?

O FireWire
O Parallel

O Serial

O USB

Scoring Rule For: correctness of response

0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.5 Identify the names, purposes, and characteristics of ports and cables

9 Which important feature is offered by the USB standard?

O A single USB connection to a computer can support up to 255 separate devices. Q


It offers rates of around 580 Mb/sec in low-speed mode.

O It allows up to 920 Mb/sec in the 2.0 version.

O It can supply power from the computer to devices.

Scoring Rule For: correctness of response

Max Value = 2

Z3

This item references content from the following areas:

IT Essentials

1.5 Identify the names, purposes, and characteristics of ports and cables

http://ev4ip.netacad.net/virmosoM 9/3/2008

Page 4

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)

Page 4 of 8

10 What are the two connector types for the 1394a interface? (Choose two.)

□ 2-pin

□ 4-pin
□ 6-pin

□ 8-pin

□ 9-pin

□ 15-pin

Scoring Rule For: correctness of response

1 point for each correct option.

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.5 Identify the names, purposes, and characteristics of ports and cables

11

TiT*y

Refer to the exhibit. What is the maximum length of the cable presented in the
graphic, which is commonly used for connecting a

computer to a printer?

O 15 ft (4.5 m)

O 20 ft (6 m)

O 27 ft (8 m)

O 30 ft (9 m)

Scoring Rule For: correctness of response

0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.5 Identify the names, purposes, and characteristics of ports and cables
-12- Which type of computer resources are direct lines to the processor used by
computer components to request information from the GPU?

O DMAs

O I/O addresses

O lRQs

O memory addresses

Scoring Rule For: correctness of response

|ö points for any other option

Max Value = 2

This item references content from the following areas:

http://ev-iip.netacad.net/virtuoso^ 9/3/2008

Page 5

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)

Page 5 of 8

IT Essentials

• 1.8 Explain system resources and their purposes

13 Which two devices are considered input devices? (Choose two.)

□ biometrie authentication device

□ printer

□ digital camera

□ projector

□ speakers

Scoring Rule For: correctness of response

1 point for each correct option.

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:


IT Essentials

• 1.6 Identify the names, purposes, and characteristics of input devices

14 A technician needs to back up 4 GB of data using a single storage medium.


Which medium can hold the entire 4 GB on a single disc?

O floppy disc

O CD-RW

O CD-R

O DVD+/-R

Scoring Rule For: correctness of response

|0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.6 Identify the names, purposes, and characteristics of storage drives

15 A technician is helping a customer compare two hard drives. Which unit of


measurement is used for the hard drive speed?

O revolutions per minute

O gigabytes

O pages per minute

O clusters per minute

Scoring Rule For: correctness of response

points for any other option

-Max-Value-s-2-

This item references content from the following areas:

IT Essentials

• 1.4.6 Identify the names, purposes, and characteristics of storage drives


16 A technician has been asked to install memory that detects multiple bit errors
and corrects single bit errors in memory. Which type of

memory should be installed if the motherboard supports these features?

O Parity

OECC

O fault tolerant

0GRG - - - - - - - - - - -

Scoring Rule For: correctness of response

http ://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer. shtml?


qpp=22&FORM_ID... 9/3/2008

Page 6

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)

Page 6 of 8

This item references content from the following areas:

IT Essentials

• 1.4.4 Identify the, and characteristics of ROM and RAM

17 Which two form factors are commonly names, purposes used to build a new
computer? (Choose two.)

□ btx

DNLQ

DATX

□ CLV

□ ECC

Scoring Rule For: correctness of response

poîïïnôr each correct option.

0 points if more options are selected than required.

Max Value = 2
This item references content from the following areas:

IT Essentials

• 1.4.1 Identify the names, purposes, and characteristics of motherboards

18 Which two characteristics of a motherboard can be determined by the form


factor? (Choose two.)

□ type of processor supported

□ color

□ size

□ maximum memory supported

□ shape

Scoring Rule For: correctness of response

point for each correct optic

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.1 Identify the names, purposes, and characteristics of motherboards

19 PATA data cables are available in two different types. The types are
distinguished by the number of conductors. Which two types are available? Choose
two.) _ _ _ _ _ _

□a

□ 40

□ 120

Scoring Rule For: correctness of response

This item references content from the following areas:

Page 7

Exam Viewer - Chapter 1 Exam - IT Essentials (Version 4.0)


Page 7 of 8

IT Essentials

1.4.7 Identify the names, purposes, and characteristics of internal cables

20 How many conductors are found in a SATA data cable?

50

78

32

68

52

Scoring Rule For: correctness of response

0 points for any other option

Max Value = 2

This item references content from the following areas:

IT Essentials

• 1.4.7 Identify the names, purposes, and characteristics of internal cables

21 Which three system resources are commonly used for communication between
the CPU or memory and other components in the

computer? (Choose three.)

□ IRQ

□ DMA

□ UDP

□ I/O address

□ USB

□ PnP

Scoring Rule For: correctness of response

1 point for each correct option.


0 points if more options are selected than required.

Max Value = 3

This item references content from the following areas:

IT Essentials

• 1.8 Explain system resources and their purposes

22 Which two categories are used to classify CPU architecture? (Choose two.)

□ ATX

□ CISC

□ PnP

□ RISC

□ ZIF

Scoring Rule For: correctness of response

1 point for each correct option.

0 points if more options are selected than required.

Max Value = 2

This item references content from the following areas:

IT Essentials

1.4.2 Explain the names, purposes, and characteristics of CPUs

Das könnte Ihnen auch gefallen