Beruflich Dokumente
Kultur Dokumente
Fingerprint identification
• 1:1 authentication & 1:N identification up 50,000 users
for physical access control • Multi-factor authentication
• Plug & play solution for PACS
• Optional ISO 14443-A & B contactless reader (FIPS 201)
• Power Over Ethernet
• FBI PIV-IQS approved fingerprint sensor
• FIPS 201 approved template generator & matcher
MorphoAccess™ 500 Series
Fingerprint identification for physical access control
Most physical access control systems The whole MA 500 range offers stan- Technical specifications
in use today are based upon proxim- dard interfaces to return the ID to the - Integrated 500 dpi MorphoSmart™sensor
23x23mm, FBI PIV-IQS certified
ity cards or identification numbers. host system. The terminal can be used
- Backlight LCD graphical display 128x64 pixels
Unfortunately, this technology does in either stand-alone or networked - Backlight keypad with 12 Keys + 4
not prevent individuals from using mode. In stand alone mode, it activates programmable function keys
someone else’s card or ID to enter a its own internal relay. When networked, - Buzzer and bi-color LEDs
restricted area. Biometric technolo- it can either operate in proxy or ap- - Communication port for IDs management:
customizable Wiegand IN & OUT, RS .422, Data
gies are extensively used to provide plication mode. In proxy mode, the
& Clock IN & OUT, Ethernet (10/100 Base T)
strong user authentication and terminal is dependent on a host con- - WIFI (Check availability with SAGEM)
avoid this type of security breach. troller that sends commands according - Relay one change over contact
Combined with contact-less smart to the Morpho® Host System Interface - Tamper & anti theft switches, secured screws
cards, biometric readers also allow protocol. In application mode, the ter- - Build-in SAM reader
- SSL (Contact SAGEM for more info)
multi-factor user authentication, minal manages the operation workflow
- ISO14443-A and B contact-less smart card
thus reinforcing the system’s overall either for physical access control or readers (FIPS 201 certification pending)
level of security. time & attendance. In both modes the - Operating temperature: -10° to +50°C
remote terminal management is pos- - Complies with EN60950, EN55022, FCC part
The MorphoAccess™ 500 series fea- sible through TCP/IP or USB. Terminal 15 and EN55024, EN300330-1 and 2, CE,
UL 60950 (certification pending).
tures a new range of indoor/outdoor management includes, log retrieval,
- Supply Voltage: 9V, 16V (250mA typical @ 12V)
biometric and contact-less smart card terminal configuration setup, firmware or Power Over Ethernet (POE)
terminals versatile enough to address a upgrade, biometric database opera- - Dimensions: 145mm x 160mm x 75mm
wide range of application from legacy tions, etc. - RJ45 plugs (Ethernet) available from the I/O
or new access control systems to stand With the MorphoAccess™ Easy Setup, board and USB from mother board
- SDK for VARs
alone and governmental programs. MorphoAccess™ terminals are easily
All the MA500 models operate in configured. Performances:
identification mode and offer a storage - FIPS 201 approved biometric algorithms
capacity of two biometric templates Software - 1:1 verification time < 1sec
per person from 3,000 to 50,000 indi- The MEMS application release 6.2 or - Identification time (1,000 records) < 1s
viduals broken down in 5 databases of higher (MorphoAccess™ Enrolment & - Adjustable FAR according to security
Management System), is a complete requirements down to 10-8
10,000 each. - Manages up to 10,000 users in
The MA520 models also offer the pos- solution for centralized management
identification mode
sibility of reading contact-less smart in legacy or stand-alone systems. It sup- - Max storage capacity = 50,000 users.
cards for 1:1 verification. The biometric ports the entire MA terminal range. We
Sagem Défense Sécurité may, at any time and without notice, make changes or improvements to the products and services offered and/or cease producing
or commercializing them. The Sagem Défense Sécurité logo and trademark are the property of Sagem Défense Sécurité SA.