Sie sind auf Seite 1von 9

17606001.

fm Page 1 Sunday, April 27, 2014 11:52 PM

Surge Protective Devices


Table of Contents
Contents
Commercial Applications

Description

Page

Externally Mounted Surge Protective Devices


External Modular SPDsEMA SPDs

External Modular L-L Enhanced SPDs

External Brick Assembly SPDsEBA SPDs

Replacement Modules

Internally Mounted Surge Protective DevicesNew Construction


SurgeLoc SPD for NQ Panelboards
Busway
Panelboards
EMA/EBA SPDs

5
Refer to 8-1
Refer to 9-1

IPaCS

Refer to 10-1

Switchboards and Switchgear

Refer to 12-1

Model 6 Motor Control Centers

Internally Mounted Surge Protective DevicesRetrofit


Internally Mounted SPDRetrofit

OEM/Assembler Kits

Nipple-Mounted Surge Protective Devices


SurgeLoc

Residential & Light


Commercial Applications

SDSA3650 SPDs

HWA SPDs

SDSA1175 SPDs

Mounting Brackets and Flush Mount Kits

XR SPDs

Residential Surge Protective Devices


Whole House Accessories

QO and HomeLine Loadcentre SPDs

SURGE PROTECTIVE DEVICES

Whole House SPDs

DE7

Nipple Mounted SPDs

Whole House SPDs

QO/CHOM SPDs

04/14

DE7-1

17606.book Page 2 Thursday, April 3, 2014 6:26 PM

Externally Mounted Surge Protective Devices

Externally Mounted Surge Protective Devices


Surgelogic offers a full range of externally mounted SPDs. These units are designed to provide surge suppression from service entrance panels to
point-of-use equipment.
US and Canadian UL Listed to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC Article 285 and CSA 22.2
No. 8-M1986 as appropriate. Complies with UL 96A 12th Edition Master Label requirements for Lightning Protection Systems.
10 modes of protection

EMI/RFI filtering

200 kA SCCR

Audible alarm with enable/disable switch, dry contacts, and surge counter standard

Indicator LEDs; normal (green) and fault condition (red) for each phase

External SPD Options:


Sine Wave Tracking Module. Sine Wave Tracking (SWT) circuitry provides enhanced EMI/RFI filtering of -54 dB at 100 kHz and establishes the
power surge clamping window relative to the sine wave voltage to increase performance at distribution and branch panel applications.
Integral Switch. The integral switch provides a mechanical means to electrically isolate the entire surge suppressor before opening the
enclosure door to facilitate servicing of the units components.
Remote Monitor. This option displays the alarm status of the surge protective device up to 1000 feet from the unit.
Flush Mount Kits. Flush mounting kits can be used on 120240 kA EMA and EBA series devices. Devices with integral switch require a 20 inch flush
mounting collar.

External Modular Assembly (EMA) SPDs


EMA SPD products feature a design based on individual phase modules for a flexible, cost effective way to achieve superior surge suppression at every
level of the electrical distribution system. Modularity results in lower life cycle costs and fast, easy service or replacement.
EMA SPDs
Peak Surge Current Rating per
NEMA 3R
Phase (kA)
Cat. No.
120
TVS1EMA12A( )
160
TVS1EMA16A( )
120/240 V, 1-phase,
240
TVS1EMA24A( )
3-wire + ground
320
TVS1EMA32A( )
480
TVS1EMA48A( )
120
TVS2EMA12A( )
208Y/120 V, 3-phase,
160
TVS2EMA16A( )
4-wire + ground ab
240
TVS2EMA24A( )
Wye
320
TVS2EMA32A( )
480
TVS2EMA48A( )
120
TVS3EMA12A( )
240/120 V, 3-phase,
160
TVS3EMA16A( )
4-wire + ground
240
TVS3EMA24A( )
High-leg Delta
320
TVS3EMA32A( )
480
TVS3EMA48A( )
120
TVS6EMA12A( )
240 V, 3-phase,
160
TVS6EMA16A( )
3-wire + ground
240
TVS6EMA24A( )
Delta
320
TVS6EMA32A( )
480
TVS6EMA48A( )
120
TVS4EMA12A( )
480Y/277 V, 3-phase,
160
TVS4EMA16A( )
4-wire + ground bc
240
TVS4EMA24A( )
Wye
320
TVS4EMA32A( )
480
TVS4EMA48A( )
120
TVS4HEMA12A( )
480Y/277 V, 3-phase,
160
TVS4HEMA16A( )
3-wire + ground
240
TVS4HEMA24A( )
High-Resistance Ground
320
TVS4HEMA32A( )
480
TVS4HEMA48A( )
120
TVS5EMA12A( )
480 V, 3-phase,
160
TVS5EMA16A( )
3-wire + ground,
240
TVS5EMA24A( )
Delta
320
TVS5EMA32A( )
480
TVS5EMA48A( )
120
TVS8EMA12A( )
600Y/347 V, 3-phase,
160
TVS8EMA16A( )
4-wire + ground b
240
TVS8EMA24A( )
Wye
320
TVS8EMA32A( )
480
TVS8EMA48A( )
120
TVS8HEMA12A( )
600Y/347 V, 3-phase,
160
TVS8HEMA16A( )
3-wire + ground
180
TVS8HEMA18A( )
High-Resistance Ground
240
TVS8HEMA24A( )
320
TVS8HEMA32A( )
120
TVS9EMA12A( )
600 V, 3-phase,
160
TVS9EMA16A( )
3-wire + ground,
180
TVS9EMA18A( )
Delta
240
TVS9EMA24A( )
320
TVS9EMA32A( )
208Y/120 series also applies to the following voltage 220Y/127.
Can be used on 4-wire or 3-wire grounded neutral system.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.
Service Voltage

External Modular SPD


with Sine Wave Tracking Module

a
b
c

DE7

SURGE PROTECTIVE DEVICES

External Modular SPD


with Integral Switch

External Modular Options ( )


(I) d Integral Switch
(SWT) Sine Wave Tracking Module (not applicable for Delta or HRG)
(ISWT) d Integral Switch and Sine Wave Tracking Module (not applicable for Delta or HRG)
Accessory Description
Remote Monitor
12-inch Flush Mount Kit
20-inch Flush Mount Kit

External Modular
High-Resistance Ground SPD

DE7-2

NEMA 4X Stainless Steel


Cat. No.
TVS1EMA12S( )
TVS1EMA16S( )
TVS1EMA24S( )
TVS1EMA32S( )
TVS1EMA48S( )
TVS2EMA12S( )
TVS2EMA16S( )
TVS2EMA24S( )
TVS2EMA32S( )
TVS2EMA48S( )
TVS3EMA12S( )
TVS3EMA16S( )
TVS3EMA24S( )

TVS6EMA12S( )
TVS6EMA16S( )
TVS6EMA24S( )
TVS6EMA32S( )
TVS6EMA48S( )
TVS4EMA12S( )
TVS4EMA16S( )
TVS4EMA24S( )
TVS4EMA32S( )
TVS4EMA48S( )
TVS4HEMA12S( )
TVS4HEMA16S( )
TVS4HEMA24S( )
TVS4HEMA32S( )
TVS4HEMA48S( )
TVS5EMA12S( )
TVS5EMA16S( )
TVS5EMA24S( )
TVS5EMA32S( )
TVS5EMA48S( )
TVS8EMA12S( )
TVS8EMA16S( )
TVS8EMA24S( )
TVS8EMA32S( )
TVS8EMA48S( )
TVS8HEMA12S( )
TVS8HEMA16S( )
TVS8HEMA18S( )
TVS8HEMA24S( )
TVS8HEMA32S( )
TVS9EMA12S( )
TVS9EMA16S( )
TVS9EMA18S( )
TVS9EMA24S( )
TVS9EMA32S( )

Cat. No.
TVS12RMU
TVS12FMK
TVS20FMK

Not available in stainless steel for 320 and 480 kA

04/14

17606.book Page 3 Thursday, April 3, 2014 6:26 PM

External Surge Protective Device

External Modular L-L Enhanced SPDs


External modular Line-to-Line (L-L) Enhanced SPDs are parallel systems that provide 10
modes of protection and enhanced, discrete L-L suppression paths.
Table
DE7.1: L-L
Enhanced SPDs
L-L
Enhanced
SPDs
Peak Surge
NEMA 3R
Current Rating
Cat. No.
per Phase (kA)
120
TVS2MEMA12A(
)
208Y/120 V, 3-phase,
180
TVS2MEMA18A( )
4-wire + ground a
270
TVS2MEMA27A(
)
Wye
360
TVS2MEMA36A( )
120
TVS4MEMA12A( )
480Y/277 V, 3-phase,
180
TVS4MEMA18A( )
4-wire + ground b
270
TVS4MEMA27A( )
Wye
360
TVS4MEMA36A( )
208Y/120 series also applies to the following voltage 220Y/127.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.
Service
Voltage

a
b

External Modular L-L Enhanced SPD


with Sine Wave Tracking Module

External Modular L-L Enhanced Options ( )


(SWT) Sine Wave Tracking Module
Accessory Description
Remote Monitor
20-inch Flush Mount Kit

NEMA 4X
Stainless Steel
Cat. No.
TVS2MEMA12S( )
TVS2MEMA18S( )
TVS2MEMA27S( )
TVS2MEMA36S( )
TVS4MEMA12S( )
TVS4MEMA18S( )
TVS4MEMA27S( )
TVS4MEMA36S( )

Cat. No.
TVS12RMU
TVS20FMK

External Brick Assembly SPDs


External Brick Assembly (EBA) SPD products consist of a consolidation of phase modules into
one solid brick casting and offered at a competitive price for those who want superior surge
suppression on a limited budget.
EBA
TableSPDs
DE7.2: EBA SPDs
Peak Surge
NEMA 3R
Current Rating
Cat. No.
per Phase (kA)
120/240 V,1-phase,
120
TVS1EBA12A( )
3-wire + ground
160
TVS1EBA16A( )
Wye
240
TVS1EBA24A( )
208Y/120 V, 3-phase,
120
TVS2EBA12A( )
4-wire + ground ab
160
TVS2EBA16A( )
Wye
240
TVS2EBA24A( )
240/120 V, 3-phase,
120
TVS3EBA12A( )
4-wire + ground
160
TVS3EBA16A( )
High-leg Delta
240
TVS3EBA24A( )
480Y/277 V, 3-phase,
120
TVS4EBA12A( )
4-wire + ground bc
160
TVS4EBA16A( )
Wye
240
TVS4EBA24A( )
600Y/347 V, 3-phase,
120
TVS8EBA12A( )
4-wire + ground b
160
TVS8EBA16A( )
Wye
240
TVS8EBA24A( )
208Y/120 series also applies to the following voltage 220Y/127.
Can be used on 4-wire or 3-wire grounded neutral system.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.
Service
Voltage

External Brick Assembly SPD


with Integral Switch

a
b
c

NEMA 4X
Stainless Steel
Cat. No.
TVS1EBA12S( )
TVS1EBA16S( )
TVS1EBA24S( )
TVS2EBA12S( )
TVS2EBA16S( )
TVS2EBA24S( )
TVS3EBA12S( )
TVS3EBA16S( )
TVS3EBA24S( )
TVS4EBA12S( )
TVS4EBA16S( )
TVS4EBA24S( )
TVS8EBA12S( )
TVS8EBA16S( )
TVS8EBA24S( )

Cat. No.
TVS12RMU
TVS12FMK
TVS20FMK

DE7

Accessory Description
Remote Monitor
12-inch Flush Mount Kit
20-inch Flush Mount Kit

SURGE PROTECTIVE DEVICES

External Brick Assembly Options ( )


(I) Integral Switch
(SWT) Sine Wave Tracking Module (not applicable for Delta)
(ISWT) Integral Switch and Sine Wave Tracking Module (not applicable for Delta)

04/14

DE7-3

17606.book Page 4 Thursday, April 3, 2014 6:26 PM

Replacement Modules

Replacement Modules
All modules and brick assemblies are US and
Canadian UL Recognized to UL 1449 3rd
Edition and UL 1283 5th Edition.
Complies with requirements of NEC Article 285
and CSA C22.2 No. 8-M1986 as appropriate.

MA Replacement
Module

HRG Replacement
Module

Delta Replacement
Module

TableReplacement
DE7.1: EMAModules
Replacement Modules
EMA
System
Voltage

Peak Surge
Current Rating (kA)

Catalog Numbers

Phase A
Phase B
120
MA1IMA12

120/240 V, 1-phase,
160
MA1IMA16

3-wire + ground
240
MA1IMA24

120
MA1IMA12
MA1IMA12
208Y/120 V, 3-phase,
4-wire + ground a
160
MA1IMA16
MA1IMA16
Wye
240
MA1IMA24
MA1IMA24
120
MA1IMA12
MA3IMA12
120/240 V, 3-phase,
4-wire + ground b
160
MA1IMA16
MA3IMA16
High-Leg Delta
240
MA1IMA24
MA3IMA24
120
MA6IMA12
MA6IMA12
240 V, 3-phase,
3-wire + ground
160
MA6IMA16
MA6IMA16
Delta
240
MA6IMA24
MA6IMA24
120
MA4IMA12
MA4IMA12
480Y/277 V, 3-phase,
4-wire + ground c
160
MA4IMA16
MA4IMA16
Wye
240
MA4IMA24
MA4IMA24
120
MA4IMA12H
MA4IMA12H
480Y/277 V, 3-phase,
3-wire + ground c
160
MA4IMA16H
MA4IMA16H
High-Resistance Ground
240
MA4IMA24H
MA4IMA24H
120
MA5IMA12
MA5IMA12
480 V, 3-phase,
3-wire + ground
160
MA5IMA16
MA5IMA16
Delta
240
MA5IMA24
MA5IMA24
120
MA8IMA12
MA8IMA12
600Y/347 V, 3-phase,
4-wire + ground
160
MA8IMA16
MA8IMA16
Wye
240
MA8IMA24
MA8IMA24
120
MA8IMA12H
MA8IMA12H
600Y/347 V, 3-phase,
3-wire + ground
160
MA8IMA16H
MA8IMA16H
High-Resistance Ground
180
MA8IMA18H
MA8IMA18H
120
MA9IMA12
MA9IMA12
600 V, 3-phase,
3-wire + ground
160
MA9IMA16
MA9IMA16
Delta
180
MA9IMA18
MA9IMA18
a
208Y/120 series also applies to the following voltage 220Y/127.
b
High-leg delta (Phase B modules are different than Phase A and Phase C modules).
c
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.

Phase C
MA1IMA12
MA1IMA16
MA1IMA24
MA1IMA12
MA1IMA16
MA1IMA24
MA1IMA12
MA1IMA16
MA1IMA24
MA6IMA12
MA6IMA16
MA6IMA24
MA4IMA12
MA4IMA16
MA4IMA24
MA4IMA12H
MA4IMA16H
MA4IMA24H
MA5IMA12
MA5IMA16
MA5IMA24
MA8IMA12
MA8IMA16
MA8IMA24
MA8IMA12H
MA8IMA16H
MA8IMA18H
MA9IMA12
MA9IMA16
MA9IMA18

TableReplacement
DE7.2: EBAModules
Replacement Modules
EBA
Peak Surge
Catalog Numbers
Current Rating (kA)
120
MA1IBA12
120/240 V, 1-phase,
160
MA1IBA16
3-wire + ground
240
MA1IBA24
120
MA2IBA12
208Y/120 V, 3-phase,
160
MA2IBA16
4-wire + ground a
240
MA2IBA24
120
MA3IBA12
240/120 V, 3-phase,
4-wire + ground b
160
MA3IBA16
High-leg Delta
240
MA3IBA24
120
MA4IBA12
480Y/277 V, 3-phase,
4-wire + ground c
160
MA4IBA16
Wye
240
MA4IBA24
120
MA8IBA12
600Y/347 V, 3-phase,
4-wire + ground
160
MA8IBA16
Wye
240
MA8IBA24
a
208Y/120 series also applies to the following voltage 220Y/127.
b
High-leg delta (Phase B modules are different than Phase A and Phase C modules).
c
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.
System Voltage

EBA Replacement Module

SURGE PROTECTIVE DEVICES

L-L Enhanced
MA Enhanced
(L-N, L-G) MA
Replacement
Table
DE7.3: L-L
(L-N, L-G) Modules
Replacement Modules
System
Voltage

MA Replacement
Module

a
b

Peak Surge
Current Rating (kA)

Catalog Numbers

Phase A
Phase B
120
MA1IMA12
MA1IMA12
208Y/120 V, 3-phase,
180
MA1IMA16
MA1IMA16
4-wire + ground a
270
MA1IMA16
MA1IMA16
Wye
360
MA1IMA24
MA1IMA24
120
MA4IMA12
MA4IMA12
480Y/277 V, 3-phase,
180
MA4IMA16
MA4IMA16
4-wire + ground b
270
MA4IMA16
MA4IMA16
Wye
360
MA4IMA24
MA4IMA24
208Y/120 series also applies to the following voltage 220Y/127.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.

Phase C
MA1IMA12
MA1IMA16
MA1IMA16
MA1IMA24
MA4IMA12
MA4IMA16
MA4IMA16
MA4IMA24

Table
DE7.4: L-L
Enhanced
(L-L) Modules
Replacement Modules
L-L Enhanced
(L-L)
Replacement

DE7

System
Voltage

L-L Enhanced
Replacement Module

DE7-4

a
b

Peak Surge
Current Rating (kA)

Catalog Numbers

Phase A
Phase B
120
MA2IMA40LL
MA2IMA40LL
208Y/120 V, 3-phase,
180
MA2IMA60LL
MA2IMA60LL
4-wire + ground a
270
MA2IMA90LL
MA2IMA90LL
Wye
360
MA2IMA12LL
MA2IMA12LL
120
MA4IMA40LL
MA4IMA40LL
480Y/277 V, 3-phase,
180
MA4IMA60LL
MA4IMA60LL
4-wire + ground b
270
MA4IMA90LL
MA4IMA90LL
Wye
360
MA4IMA12LL
MA4IMA12LL
208Y/120 series also applies to the following voltage 220Y/127.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.

Phase C
MA2IMA40LL
MA2IMA60LL
MA2IMA90LL
MA2IMA12LL
MA4IMA40LL
MA4IMA60LL
MA4IMA90LL
MA4IMA12LL

04/14

17606.book Page 5 Thursday, April 3, 2014 6:26 PM

Internally Mounted Surge Protective Devices


Internally Mounted Surge Protective Devices
Internally mounted surge protective devices are installed integrally to systems for service entrance and branch panel surge suppression.
Internally mounted SPDs installed next to supply busses provide maximum performance inside Square D systems. Built-in performance is the
best way to ensure cost effective power quality (especially important for critical power facilities).
US and Canadian UL Recognized as a Type 2 (or 1 with optional suffix in catalog number) SPD Component Assembly to UL 1449 3rd Edition
and UL 1283 5th Edition. Complies with requirements of NEC Article 285 and CSA C22.2 No. 8-M1986 as appropriate. Complies with UL 96A
12th Edition Master Label requirements for Lightning Protection Systems.

Internally MountedNew Construction


Factory installed integral/internal Surgelogic SPD products make adding surge suppression to new construction projects easy. Refer to the
sections listed below to identify the correct product for your application or contact Customer Care Centre at 1-800-565-6699 for assistance.
Panelboards

NF

NQ

Switchboards and Switchgear

PZ4

QED

Motor Control
Centers

Integrated Power and


Control Centers

MCC

IPAC2

SurgeLoc Surge Protective Devices (Available also in Retrofit)

Peak Surge Current Rating (kA)


80
80
80
100
100
100
120
120
120
160
160
160
200
200
200
240
240
240

Cat. No. a
SSP01BIA08PBQ1
SSP02BIA08PBQ1
SSP03BIA08PBQ1
SSP01BIA10PBQ1
SSP02BIA10PBQ1
SSP03BIA10PBQ1
SSP01BIA12PBQ1
SSP02BIA12PBQ1
SSP03BIA12PBQ1
SSP01BIA16PBQ1
SSP02BIA16PBQ1
SSP03BIA16PBQ1
SSP01BIA20PBQ1
SSP02BIA20PBQ1
SSP03BIA20PBQ1
SSP01BIA24PBQ1
SSP02BIA24PBQ1
SSP03BIA24PBQ1

b 208Y/120 series also applies to the following voltage 220Y/127.


Note: When selecting a panelboard with a SurgeLoc SPD, an additional 12 circuit positions (6 adjacent mounting spaces
per side) or 4.5 inches of space on each side are required. For example, if desired number of circuits is 30, a 42 circuit
panelboard is required.
Note: Surgeloc SPDs are only available in Type 1 SPD format.

05/14

DE7-5

DE7

Voltage
120/240 V
208Y/120V b
240/120 HLD
120/240 V
208Y/120V b
240/120 HLD
120/240 V
208Y/120V b
240/120 HLD
120/240 V
208Y/120V b
240/120 HLD
120/240 V
208Y/120V b
240/120 HLD
120/240 V
208Y/120V b
240/120 HLD

SURGE PROTECTIVE DEVICES

Surgelogic SurgeLoc, a new line of commercial surge that provides advanced power
and equipment protection for Square D NQ panelboards. SurgeLoc installs in 2 minutes
or less, a 90% reduction from the typical 20 minutes for an externally mounted SPD and
exceeds competitor products with outstanding specifications in a compact device.
EMI/RFI Noise Rejection
Coordinated Fuse Technology
Eliminates need for additional enclosure or longer wire leads for mounting external SPD
24 - 30% height reduction by using standard panel size
80,000 to 240,000 Amp Capacity (depending on model)
10 year warranty
Option: Remote Monitor

17606.book Page 6 Thursday, April 3, 2014 6:26 PM

Internally Mounted Surge Protective Devices

Internally MountedRetrofit
To ensure high-performance surge suppression at critical power locations, a variety of Surgelogic products have
been designed specifically for retrofitting into commonly used Square D systems. The QMB fusible switch, 6 in.
MCC bucket, I-Line and Busway plug-on units come with the SPD factory-installed. Retrofitting SPD units into I-Line,
QMB, MCC, and Busway applications is simple.
Audible alarm with enable/disable switch, dry contacts, and surge counter standard.
200 kA SCCR
Indicator LEDs
EMI/RFI filtering
Table DE7.1: Internally MountedRetrofit
Voltage

I-Line Surgelogic
SPD Unit

120/240 V, 1-phase,
3-wire + ground
208Y/120 V, 3-phase,
4-wire + ground fg
Wye
240/120 V, 3-phase,
4-wire + ground
High-leg Delta
240 V, 3-phase,
3-wire + ground,
Delta

QMB Surgelogic
SPD Unit

480Y/277 V, 3-phase,
4-wire + ground fh
Wye
480Y/277 V, 3-phase,
3-wire + ground h
High-Resistance Ground

Busway Surgelogic
SPD Unit

480 V, 3-phase,
3-wire + ground,
Delta
600Y/347 V, 3-phase,
4-wire + ground f
Wye
600Y/347 V, 3-phase,
3-wire + ground,
High-Resistance Ground
600V, 3-phase,
3-wire + ground,
Delta

I-Line Branch Units a

Surge Current Rating

Cat. No.
HL1IMA12C( )
HL1IMA16C( )
HL1IMA24C( )
HL2IMA12C( )
HL2IMA16C( )
HL2IMA24C( )
HL3IMA12C( )
HL3IMA16C( )
HL3IMA24C( )
HL6IMA12C( )
HL6IMA16C( )
HL6IMA24C( )
HL4IMA12C( )
HL4IMA16C( )
HL4IMA24C( )
HL4HIMA12C( )
HL4HIMA16C( )
HL4HIMA24C( )
HL5IMA12C( )
HL5IMA16C( )
HL5IMA24C( )

120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
240 kA
120 kA
160 kA
180 kA
120 kA
160 kA
180 kA

Cat. No.
FI1IMA12C( )
FI1IMA16C( )
FI1IMA24C( )
FI2IMA12C( )
FI2IMA16C( )
FI2IMA24C( )
FI3IMA12C( )
FI3IMA16C( )
FI3IMA24C( )
FI6IMA12C( )
FI6IMA16C( )
FI6IMA24C( )
FI4IMA12C( )
FI4IMA16C( )
FI4IMA24C( )
FI4HIMA12C( )
FI4HIMA16C( )
FI4HIMA24C( )
FI5IMA12C( )
FI5IMA16C( )
FI5IMA24C( )
FI8IMA12C( )
FI8IMA16C( )
FI8IMA24C( )
FI8HIMA12C( )
FI8HIMA16C( )
FI8HIMA18C( )
FI9IMA12C( )
FI9IMA16C( )
FI9IMA18C( )

QMB Branch Units b

Busway Units

Model 6 MCC Units c

Cat. No.
QMB1IMA12
QMB1IMA16
QMB1IMA24
QMB2IMA12
QMB2IMA16
QMB2IMA24
QMB3IMA12
QMB3IMA16
QMB3IMA24

QMB4IMA12
QMB4IMA16
QMB4IMA24

QMB8IMA12
QMB8IMA16
QMB8IMA24

Cat. No.

PIU2IMA16
PIU2IMA24

PIU3IMA16
PIU3IMA24

PIU4IMA16
PIU4IMA24

PIU8IMA16
PIU8IMA24

Cat. No.

MCC2IMA12
MCC2IMA16
MCC2IMA24
MCC3IMA12
MCC3IMA16
MCC3IMA24

MCC4IMA12
MCC4IMA16
MCC4IMA24

MCC8IMA12
MCC8IMA16
MCC8IMA24

Internally MountedRetrofit
MCC Surgelogic
SPD Unit

a
b
c

Requires 13.5-inch mounting height.


Requires 9-inch mounting height.
Requires 6-inch mounting height.

d
e

Can be used on 4-wire or 3-wire grounded


neutral system.

g
h

208Y/120 series also applies to the following


voltage 220Y/127.
480Y/277 series applies to the following voltages
380Y/220, 400Y/230, and 415Y/240.

DE7

SURGE PROTECTIVE DEVICES

( ) For a Type 1 SPD, add a 1 suffix to the catalog number.

DE7-6

04/14

17606.book Page 7 Thursday, April 3, 2014 6:26 PM

Surgelogic Surge Protective Devices

OEM/Assembler Kits
Surgelogic OEM/assembler kits allow manufacturers to add industry-leading surge
suppression directly to customized equipment. Manufacturers benefit from shorter wire
lengths that optimize the clamping voltage of the SPD. Products come with a backplanemounted SPD, mounting hardware and diagnostic display with 36-inch cables. Audible
alarm, silence switch, remote monitoring contacts, and surge counter are standard.
Available as UL 1449 Type 2 (or 1 with optional suffix in catalog number).
US and Canadian UL Recognized to UL 1449 3rd Edition and UL 1283 5th Edition.
Complies with requirements of NEC Article 285 and CSA 22.2 No. 8-M1986 as
appropriate. Complies with UL 96A 12th Edition Master Label requirements for Lightning
Protection Systems.
OEM/Assembler
Kits
Table DE7.1: OEM/Assembler
Kits
Service
Voltage

OEM Kit

()
a
b
c
d

Peak Surge Current Rating


per Phase (kA)
120
120/240 V, 1-phase,
160
3-wire + ground
240
120
208Y/120 V, 3-phase,
4-wire + ground bc
160
Wye
240
120
240/120 V, 3-phase,
4-wire + ground
160
High-leg Delta
240
120
240 V, 3-phase,
3-wire + ground bd
160
Delta
240
120
480Y/277 V, 3-phase,
4-wire + ground bd
160
Wye
240
120
480Y/277 V, 3-phase,
3-wire + ground bd
160
High-Resistance Ground
240
120
480 V, 3-phase,
3-wire + ground
160
Delta
240
120
600Y/347 V, 3-phase,
4-wire + ground b
160
Wye
240
120
600Y/347 V, 3-phase,
3-wire + ground b
160
High Resistance Ground
180
120
600 V, 3-phase,
3-wire + ground
160
Delta
180
For a Type 1 SPD, add a 1 suffix to the catalog number.
Note the last character of the catalog number is the letter O, not a zero.
Can be used on 4-wire or 3-wire grounded neutral system.
208Y/120 series also applies to the following voltage 220Y/127.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.

Cat. No. a
TVS1IMA12O( )
TVS1IMA16O( )
TVS1IMA24O( )
TVS2IMA12O( )
TVS2IMA16O( )
TVS2IMA24O( )
TVS3IMA12O( )
TVS3IMA16O( )
TVS3IMA24O( )
TVS6IMA12O( )
TVS6IMA16O( )
TVS6IMA24O( )
TVS4IMA12O( )
TVS4IMA16O( )
TVS4IMA24O( )
TVS4HIMA12O( )
TVS4HIMA16O( )
TVS4HIMA24O( )
TVS5IMA12O( )
TVS5IMA16O( )
TVS5IMA24O( )
TVS8IMA12O( )
TVS8IMA16O( )
TVS8IMA24O( )
TVS8HIMA12O( )
TVS8HIMA16O( )
TVS8HIMA18O( )
TVS9IMA12O( )
TVS9IMA16O( )
TVS9IMA18O( )

SDSA3650 Surge Protective Devices

SDSA3650

SDSA3650 SPDs are designed and listed for indoor or outdoor installation and surge
suppression for three-phase grounded electrical services up to 600 Vac, including delta
services (SDSA3650D). The SDSA3650 series is used extensively in service entrance
panels to provide an efficient and economical means of surge suppression.
US and Canadian UL Listed as a Type 1 SPD to UL 1449 3rd Edition. Complies with
requirements of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as
appropriate.
LEDs indicate operational status
Short circuit current rating 200 kA
Suitable for indoor and outdoor applications (NEMA Type 4X rated)
Convenient back-nipple mounting

SURGE PROTECTIVE DEVICES

Nipple-Mounted Surge Protective Devices

Description

Peak Surge Current Rating


per Phase (kA)

600 Vac Maximum,


40
3-phase, 4-wiree
600 Vac Maximum,
3-phase, 3-wire
40
Delta
Do not use on ungrounded systems. Systems must be solidly grounded.

Cat. No.
SDSA3650
SDSA3650D

SDSA3650D

04/14

DE7-7

DE7

SDSA3650
Surge
Protective
Devices
Table DE7.2:
SDSA3650
Surge
Protective Devices

17606.book Page 8 Thursday, April 3, 2014 6:26 PM

Nipple Mounted SPDs


HWA Surge Protective Devices
Surgelogic HWA surge protective devices are compact, nipple-mounted parallel-connected
surge suppressors that come in a variety of voltage configurations, including Delta. A surge
suppression path is provided for each mode, and the product is rated NEMA Type 4X. Internal
diagnostics continuously monitor the device status.
US and Canadian UL Listed as a Type 2 SPD to UL 1449 3rd Edition and UL 1283 5th
Edition. Complies with requirements of NEC Article 285 and CSA C22.2 No. 8-M1986 as
appropriate. Complies with UL 96A 12th Edition Master Label requirements for Lightning
Protection Systems.

HWA Series

LEDs indicate operational status


Short circuit current rating 200 kA
Suitable for indoor and outdoor applications
(NEMA Type 4X rated)
Convenient side-nipple mounting
Compact design provides easy mounting inside or
outside the equipment cabinets

-54 dB EMI/RFI filtering


Sine wave tracking
Audible alarm indicates loss of suppression (does
not contain alarm enable/disable switch)
Dry contacts
Optional flush-mount kit TVSHWAFMK

Table Surge
DE7.1:Protective
HWA Surge
Protective Devices
HWA
Devices
Service
Voltage

a
b
c

Peak Surge Current Rating


per Phase (kA)
50
120/240 V, 1-phase,
80
3-wire + ground
100
50
208Y/120 V, 3-phase,
80
4-wire + ground ab
100
50
240/120 V, 3-phase,
4-wire + ground
80
High-leg Delta
100
50
240 V, 3-phase,
3-wire + ground
80
Delta
100
50
480Y/277 V, 3-phase,
80
4-wire + ground ac
100
50
480 V, 3-phase,
3-wire + ground
80
Delta
100
50
600Y/347 V, 3-phase,
80
4-wire + ground
100
50
600 V, 3-phase,
3-wire + ground
80
Delta
100
Can be used on 4-wire or 3-wire grounded neutral system.
208Y/120 series also applies to the following voltage 220Y/127.
480Y/277 series applies to the following voltages 380Y/220, 400Y/230, and 415Y/240.

NEMA 4X
Cat. No.
TVS1HWA50X
TVS1HWA80X
TVS1HWA10X
TVS2HWA50X
TVS2HWA80X
TVS2HWA10X
TVS3HWA50X
TVS3HWA80X
TVS3HWA10X
TVS6HWA50X
TVS6HWA80X
TVS6HWA10X
TVS4HWA50X
TVS4HWA80X
TVS4HWA10X
TVS5HWA50X
TVS5HWA80X
TVS5HWA10X
TVS8HWA50X
TVS8HWA80X
TVS8HWA10X
TVS9HWA50X
TVS9HWA80X
TVS9HWA10X

SDSA1175 Surge Protective Devices

SURGE PROTECTIVE DEVICES

SDSA1175 SPDs are designed and listed for indoor or outdoor installation and surge
suppression for single-phase three-wire 120/240 Vac or two-wire 120 Vac 60 Hz electrical
services. This product is ideal for panel builders as well as manufacturers and integrators of
instrumentation cabinets for industrial, commercial, and residential applications for singlephase power systems. Two SDSA1175 surge protection devices can be installed to provide
suppression for 208Y/120 Vac three-phase four-wire services.
US and Canadian UL Listed as Type 1 SPD to UL 1449 3rd Edition. Complies with requirements
of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate.

SDSA1175

LED indicates operational status


Short circuit current rating 25 kA
Suitable for indoor and outdoor applications (NEMA Type 4X rated)
Convenient back-nipple mounting

Table DE7.2:
SDSA1175
Surge
Protective Devices
SDSA1175
Surge
Protective
Devices
System Voltage
120/240 V, 1-phase, 3-wire
120 V, 1-phase, 2-wire

Peak Surge Current Rating


per Phase (kA)
36
36

Cat. No.
SDSA1175
SDSA1175T

DE7

Mounting Brackets and Flush Mount Kits


The nipple products shown in this catalog provide a convenient means of incorporating surge
suppression within a new or existing cabinet. The mounting bracket and flush-mount kits are
designed for easy mounting of nipple products.
Table
DE7.3:
Mounting
Bracket for Enclosures
Mounting
Bracket
for Enclosures
QOSAMK

DE7-8

Description
Mounting bracket for QO and HomeLine Loadcentres and other enclosures
Flush-mount kit for XR SPDs
Flush-mount kif for HWA SPDs

Cat. No.
QOSAMK
TVSXRFMK
TVSHWAFMK

04/14

17606.book Page 9 Thursday, April 3, 2014 6:26 PM

Residential SPDs
XR Surge Protective Devices
The XR SPD provides high-quality surge suppression in a compact and versatile package. This
product is ideal for panel builders as well as manufacturers and integrators of instrumentation
cabinets for industrial, commercial, and residential applications for single-phase power
systems.
US and Canadian UL Listed as Type 1 SPD to UL 1449 3rd Edition. Complies with
requirements of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate.
LEDs indicate operational status
Short circuit current rating 25 kA
Convenient side nipple mounting

Suitable for indoor and outdoor applications


(NEMA Type 4X rated)
Optional flush mount kit TVSXRFMK

XR Nipple-Mounted Surge Protective Devices

XR Series

System Voltage
120/240 V, 1-phase,
3-wire + ground

Peak Surge Current Rating


per Phase (kA)
50
80

Cat. No.
TVS120XR50S
TVS120XR80S

Residential Surge Protective Devices


Whole House Surge Protective Devices
Whole House devices are designed to deliver surge suppression that addresses the entire
home. AC modules are connected to the circuit breaker loadcentre and provide suppression
for all equipment connected to the power system. Whole House systems incorporate AC
modules as well as modules for other metallic lines coming into the home including
telephone/DSL and coaxial video/data.
US and Canadian UL Listed as Type 2 SPD to UL 1449 3rd Edition. Complies with requirements
of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. Telephone and
coaxial video modules US and Canadian UL Recognized to UL 497A 4th Edition and UL 497B
4th Edition.
120/240 Vac, 80 kA/phase AC surge suppression
LED status indicators for AC surge suppression
Telephone surge suppression module supports four lines with tool-less Insulation Displacement
Connectors (IDC)
Coaxial surge suppression module supports one line of video/data
SDSB1175R

SDSB1175C

Whole House Surge Protective Devices


Description
Whole House NEMA 1 Basic
Whole House NEMA 1
Whole House NEMA 3R Basic
Whole House NEMA 3R
Home Electronics Protective Device

Included Modules
AC
AC, Telephone, Coax (1)
AC
AC, Telephone, Coax (1)
AC

Cat. No.
SDSB1175CB
SDSB1175C
SDSB1175RB
SDSB1175R
HEPD80

Whole House Accessories

Description
4-Line telephone surge suppressor with tool-less IDC terminations
Coaxial video surge suppressor
Whole House AC Module (HEPD80) replacement kit

Cat. No.
SDSA4P
SDSA2V
HEPD80RK

QO, NQ, and HomeLine Loadcentre Surge Protective Devices


SDSA2V

SDSA4P

HEPD80RK

Square D loadcentre surge protective devices are easy to install plug-in units that install as
quickly as a standard circuit breaker. The surge suppressors use two pole spaces in a QO
or HomeLine loadcentre, or NQ panelboard.
US and Canadian UL Listed as Type 2 SPD to UL 1449 3rd Edition. Complies with requirements
of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate.
QO2175SB for QO loadcentres, combination Plug-on design requires two pole spaces
devices, and NQ panelboards
LED indicates operational status
CHOM2175SB for HomeLine loadcentres and 22.5 kA per phase
combination devices

QO, NQ, and HomeLine Panelboard Surge Arresters


Description
QO Surgebreaker for QO and NQ
HomeLine Surgebreaker

QO2175SB

04/14

Cat. No.
QO2175SB
CHOM2175SB

CHOM2175SB

DE7-9

DE7

HEPD80

SURGE PROTECTIVE DEVICES

Add additional surge suppression or replace existing modules in Whole House products.
Coaxial and telephone modules: US and Canadian UL Recognized to UL 497A 4th Edition
and UL 497B 4th Edition.
AC Module: US and Canadian UL Listed as Type 1 SPD to UL 1449 3rd Edition. Complies with
requirements of NEC Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate.
Accessories

Das könnte Ihnen auch gefallen