Beruflich Dokumente
Kultur Dokumente
In this file, you can ref useful information about laboratory quality management such as
laboratory quality managementforms, tools for laboratory quality management, laboratory
quality managementstrategies If you need more assistant for laboratory quality management,
please leave your comment at the end of file.
Other useful material for laboratory quality management:
qualitymanagement123.com/23-free-ebooks-for-quality-management
qualitymanagement123.com/185-free-quality-management-forms
qualitymanagement123.com/free-98-ISO-9001-templates-and-forms
qualitymanagement123.com/top-84-quality-management-KPIs
qualitymanagement123.com/top-18-quality-management-job-descriptions
qualitymanagement123.com/86-quality-management-interview-questions-and-answers
Practising analytical chemists, laboratory supervisors and laboratory managers who need to
update their skills.
Estimated annual fee
Fee per credit point
Fees quoted are the estimated payable fees for the relevant degree in 2015, based on a typical
credit load calculation per academic session. An individual student's credit load may change in
each academic session. The University reviews per credit point fees each year and fees may
change year on year. For courses of more than one year in duration, students will pay the fee that
is current for the year of enrolment. Students may incur other fees, charges and conditions for
each session in which they enrol and are advised to check these with the University before
enrolment. More information on tuition fees.
Entry requirements
Australian level 7 bachelor's qualification or recognised equivalent
GPA of 2.50 (out of 4.00)
English Language Requirements
IELTS of 6.5 overall with minimum 6.0 in each band, or equivalent
All applicants for undergraduate or postgraduate coursework studies at Macquarie University are
required to provide evidence of proficiency in English.
For more information see English Language Requirements.
You may satisfy the English language requirements if you have completed:
1. Check sheet
The check sheet is a form (document) used to collect data
in real time at the location where the data is generated.
The data it captures can be quantitative or qualitative.
When the information is quantitative, the check sheet is
sometimes called a tally sheet.
The defining characteristic of a check sheet is that data
are recorded by making marks ("checks") on it. A typical
check sheet is divided into regions, and marks made in
different regions have different significance. Data are
2. Control chart
Control charts, also known as Shewhart charts
(after Walter A. Shewhart) or process-behavior
charts, in statistical process control are tools used
to determine if a manufacturing or business
process is in a state of statistical control.
If analysis of the control chart indicates that the
process is currently under control (i.e., is stable,
with variation only coming from sources common
to the process), then no corrections or changes to
process control parameters are needed or desired.
In addition, data from the process can be used to
predict the future performance of the process. If
the chart indicates that the monitored process is
not in control, analysis of the chart can help
determine the sources of variation, as this will
result in degraded process performance.[1] A
process that is stable but operating outside of
desired (specification) limits (e.g., scrap rates
may be in statistical control but above desired
limits) needs to be improved through a deliberate
3. Pareto chart
A Pareto chart, named after Vilfredo Pareto, is a type
of chart that contains both bars and a line graph, where
individual values are represented in descending order
by bars, and the cumulative total is represented by the
line.
The left vertical axis is the frequency of occurrence,
but it can alternatively represent cost or another
important unit of measure. The right vertical axis is
the cumulative percentage of the total number of
occurrences, total cost, or total of the particular unit of
measure. Because the reasons are in decreasing order,
the cumulative function is a concave function. To take
the example above, in order to lower the amount of
late arrivals by 78%, it is sufficient to solve the first
three issues.
The purpose of the Pareto chart is to highlight the
most important among a (typically large) set of
factors. In quality control, it often represents the most
common sources of defects, the highest occurring type
of defect, or the most frequent reasons for customer
complaints, and so on. Wilkinson (2006) devised an
5.Ishikawa diagram
Ishikawa diagrams (also called fishbone diagrams,
herringbone diagrams, cause-and-effect diagrams, or
Fishikawa) are causal diagrams created by Kaoru
Ishikawa (1968) that show the causes of a specific event.
[1][2] Common uses of the Ishikawa diagram are product
design and quality defect prevention, to identify potential
factors causing an overall effect. Each cause or reason for
imperfection is a source of variation. Causes are usually
grouped into major categories to identify these sources of
variation. The categories typically include
People: Anyone involved with the process
Methods: How the process is performed and the
specific requirements for doing it, such as policies,
procedures, rules, regulations and laws
Machines: Any equipment, computers, tools, etc.
required to accomplish the job
Materials: Raw materials, parts, pens, paper, etc.
6. Histogram method
A histogram is a graphical representation of the
distribution of data. It is an estimate of the probability
distribution of a continuous variable (quantitative
variable) and was first introduced by Karl Pearson.[1] To
construct a histogram, the first step is to "bin" the range of
values -- that is, divide the entire range of values into a
series of small intervals -- and then count how many
values fall into each interval. A rectangle is drawn with
height proportional to the count and width equal to the bin
size, so that rectangles abut each other. A histogram may
also be normalized displaying relative frequencies. It then
shows the proportion of cases that fall into each of several
categories, with the sum of the heights equaling 1. The
bins are usually specified as consecutive, non-overlapping
intervals of a variable. The bins (intervals) must be
adjacent, and usually equal size.[2] The rectangles of a
histogram are drawn so that they touch each other to
indicate that the original variable is continuous.[3]