Beruflich Dokumente
Kultur Dokumente
Author
Description
Versi
on
02/15/14
SAR
Add Horizontal slot punch option to MIFARE single tech card as well as option Z for marking.
Incorporate UHF triple tech card with base p/n 600
C.8
12/13/13
SAR
C.7
11/19/13
SAR
Added iCLASS Seos 8K and LEGIC options. Removed PIN programming for each credentials.
Integrate slottable options for iCLASS SR/iCLASS SE card options.
C.6
10/1/13
PT
C.5
9/19/13
SAR, PT Add new memory options for clamshell and iCLASS Seos + Prox (510). Indala updates.
C.4
5/8/13
PT
Updated iCLASS SE and multiCLASS Readers Quick Reference Part Numbers table (E to 0).
C.3
4/5/13
PT, TP
Added new tables for rev E hardware with new notes for proper use of 13.56 and keys. Added C.2
new table for configuration cards and notes.
3/1/13
PT
Added iCLASS SE Decor Flush Mount reader, Default Numbers, Configuration Card
Examples, OSDP Upgrade Kit. Modified Programming Cards.
C.1
9/25/12
SA
C.0
Contents
iCLASS SE Credential and Reader System Introduction ........................................................................ 3
iCLASS SE Platform Overview ..................................................................................................................................3
iCLASS SE Credentials............................................................................................................................. 10
300/305 - iCLASS SE Card Ordering Guide............................................................................................................ 10
310/315 - iCLASS SE + Prox Card Ordering Guide ................................................................................................ 11
325 - iCLASS SE Key Ordering Guide .................................................................................................................... 13
330 - iCLASS SE Tag Ordering Guide .................................................................................................................... 14
335 - iCLASS SE Clamshell Card Ordering Guide .................................................................................................. 15
390/391 - iCLASS SE/Other HF - Combination Card Ordering Guide..................................................................... 16
395/396 - iCLASS SE/Other 13.56MHz/Prox - Combination Card Ordering Guide ................................................. 18
Accessories ............................................................................................................................................... 48
OSDP Upgrade Kit .................................................................................................................................................. 48
Page 2 of 48
February 2014
iCLASS Seos
Readers
iCLASS SE
multiCLASS SE
Configuration cards
Credentials
iCLASS Seos credentials deliver enhanced security, data confidentiality and stronger authentication for user data. Seos comprises a
generic card edge (card command interface) to meet the growing demand for interoperability; a secure messaging protocol to
protect data transmission. In addition, Seos provides an open software architecture that is portable to a range of mobile devices and
micro processors. The credential offers enhanced privacy protection by delivering data confidentiality and integrity between the
smart card and the reader to prevent sensitive/personal data from being intercepted or cloned. Seos credentials are only delivered
with SIO objects and are not backwards compatible with standard iCLASS offerings (one or several according to your requirements).
iCLASS SE Credentials are available in either SIO-Enabled (SE) or SIO-Ready (SR) configurations:
SE credentials come with a single access control data payload, the SIO. iCLASS SE credentials provide the highest level of data
integrity and privacy, this type of card maximizes security.
SR credentials come with at least two access control data payloads, the SIO and a legacy access control data payload. SR
credentials provide backward compatibility with currently deployed systems, this type of card maximizes compatibility. SR
credentials should be purchased when the site needs legacy application support, or when the site plans to eventually migrate to SIO
security.
iCLASS SE and SR credentials are available in all standard card bodies and form factors offered by HID.
iCLASS SE credentials are designed to work in a new installation of iCLASS SE readers and are not compatible with standard
iCLASS readers.
February 2014
Page 3 of 48
Data
Payload
Advantage
iCLASS Seos
Single
No
SIO-Enabled (SE)
Single
No
Maximizes Security
SIO-Ready (SR)
Dual
Yes
MIFARE Classic and MIFARE DESFire EV1 credentials are available in SE configuration only. MIFARE DESFire EV1 SE
credentials come in standard card body options.
Card Technology
SE Available
SR Available
iCLASS SE 2, 16. 32 kb
Yes
Yes
Yes
No
Yes
No
No
Yes
Note: SIO objects only apply to 13.56 MHz contactless Smart Card technology.
Description
3000
iCLASS SE 2k
HID iCLASS JH SE
3001 / 3002
iCLASS SE 16k
HID iCLASS JH SE
3003 / 3004
iCLASS SE 32k
HID iCLASS JH SE
3050
iCLASS SE 2k Composite
HID iCLASS JH SE XT
3051 / 3052
HID iCLASS JH SE XT
3053 / 3054
HID iCLASS JH SE XT
3100
iCLASS SE 2k + Prox
3101 / 3102
3103 / 3104
3150
iCLASS SE 2k + Prox
3151 / 3152
3153 / 3154
3400
HID MIFARE BH SE
3406
HID MIFARE CH SE
3450
HID MIFARE BH SE XT
3456
HID MIFARE CH SE XT
3500
3506
3550
3556
3700
HID DESFire DH SE
3750
HID DESFire DH SE XT
3800
3850
5005
5006
5105
5106
Page 4 of 48
February 2014
iCLASS SE Readers
Interpreters:
iCLASS SE readers support multiple card data interpreters that enable authentication, extraction, interpretation and output of the
programmed credential data. The following is a list of interpreters and their primary card compatibility.
Standard iCLASS Access Control Interpreter: For compatibility with standard iCLASS Access Control
Applications on iCLASS credentials, choose 13.56 MHz Interpreter = Standard.
CSN Interpreter: For CSNs of ISO14443A/B and ISO15693 compliant credentials, choose the CSN Interpreter.
Form Factors:
Additionally, iCLASS SE and multiCLASS SE readers come in a variety of finished reader forms and hardware configurations
including the following.
Mini-Mullion: For a mullion mounted product, which is the smallest version, choose Mini-Mullion.
Mullion: For a mullion mounted product sized the same as MiniProx, select Mullion.
Wall Switch: For standard Wall Switch mount, US / EU / APAC mount choose Wall Switch.
Euro Square: For standard EU / APAC 60mm mount, select Euro Square.
Wall Switch Keypad: For standard wall switch mount, US / EU / APAC Keypad mount choose Wall Switch Keypad.
Panel Communication:
iCLASS SE and multiCLASS SE readers support a variety of communication protocol variations for maximum panel compatibility,
including the following:
February 2014
Page 5 of 48
Order iCLASS Seos for the highest security level with the maximum portability of your credentials onto other form factors
(such as an NFC enabled phone).
Order iCLASS SE, SIO-Enabled Technology for MIFARE Classic or MIFARE DESFire EV1 credentials if you want your
iCLASS SE readers to work out-of-the-box without configuration and with maximized security.
Downgrade the security of your iCLASS SE readers either when ordering product (order non-default
T = standard setting) or in the field using a configuration card in order to read standard iCLASS credentials. iCLASS SE
readers always work with iCLASS SE credentials.
New Sites - When deploying credentials for a new site, deploy iCLASS SE Credentials with iCLASS SE Readers for
maximum security with the most up-to-date credentialing and reader system.
iCLASS Existing Sites: When deploying credentials to an existing site with standard iCLASS credentials and readers,
purchasing iCLASS SR credentials along with iCLASS SE readers with downgraded security (supporting standard
interpreters) provides full interoperability with HIDs latest and greatest credential and reader platform. This provides
options to upgrade security in the future without rip-and-replace of the newly purchased readers. Once all readers on site
are iCLASS SE the customer can begin ordering iCLASS SE cards. iCLASS SE, SR and standard iCLASS cards can work
simultaneously in the field using iCLASS SEs 13.56 MHz Standard interpreter. Once all cards in the population are SR or
SE, readers can be upgraded to support only SIOs on either SR or SE cards.
125 kHz Existing Sites: Deploying credentials to an existing 125 kHz site with HID Prox/Indala Proximity credentials and
readers (HID, Indala, AWID, and EM4102), purchase multi-technology iCLASS SE Credentials along with multiCLASS SE
Readers for full credential and reader interoperability and a relaxed migration timeline.
CP400 & CP575: The field programmers are NOT compatible with iCLASS SE/SR credentials. Only factory programming
of iCLASS credentials with SIO is available at this time.
Version 1
Version 2
Alternatively, the SE Elite Security Program supports a unique keyset on a per site/company basis.
The keyset governs a variety of keys, including:
Media (credential) keys for iCLASS SE/SR, SIO-Enabled Technology for MIFARE Classic and MIFARE DESFire EV1
credentials
Configuration programming keys (for programming reader configuration, also media independent)
When utilizing HIDs standard key set for the above keys, all standard keyed credentials work with all standard keyed readers.
Additionally, any Standard Security configuration card configures a Standard Security reader (only accomplished during the first five
(5) seconds after reader powers-up). Conversely, when utilizing the SE Elite program, only site/company specific Elite credentials
and programming cards work with matching readers.
Page 6 of 48
February 2014
Direct customers of HID must be authorized to purchase components with Elite keys. If you are not authorized, you must
have the key owner authorize you through the Authorization form.
See www.hidglobal.com/main/services/credential-programs/class-elite.
Ensure the Elite flag is set in the part number (of readers, credentials and programming cards).
All Purchase Orders for Elite components must be ordered with the Elite reference number (starts with ICE).
February 2014
Page 7 of 48
Base Model
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 5005PGGNN
Final Part Number
500
(Options #)
(example: H10301)
. Stop
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are not available with any slot punch option.
1
2
Page 8 of 48
February 2014
Base Model
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 5105PGGNNN
Final Part Number
510
(Options #)
(example: H10301)
. Stop
Facility Code
Facility Code
. (example: 26 bit)
Format Number
City Code
OEM Code
. Stop
. External Card # Start
(example: H10301)
. Stop
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are not available with any slot punch option.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
February 2014
Page 9 of 48
iCLASS SE Credentials
300/305 - iCLASS SE Card Ordering Guide
Maximized security into installations that do NOT contain standard iCLASS credentials.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 3000PGGNN
Final Part Number
(Options #)
(example: H10301)
. Stop
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order options B or H for
the Slot Punch.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 10 of 48
February 2014
Base Model
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 3101PGGNNN
Final Part Number
(Options #)
February 2014
(example: H10301)
. Stop
Page 11 of 48
OEM Code
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot
Punch.
7 H slot punch option is not yet supported on iCLASS 16k or 32k memory options.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 12 of 48
February 2014
Front Packaging
N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork
Back Packaging
N - None
Key Numbering1
Additional Options3
N - None
Enter your final card options from the above selections. Example: 3250PNNMN
Final Part Number
325
(example: H10301)
. Stop
February 2014
Page 13 of 48
Back Packaging
S - Adhesive Backing
Slot Punch
N - None
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final Tag options from check boxes above. Example: 3302PSSNN
Final Part Number
330
(Options #)
(example: H10301)
. Stop
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices,
HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional iCLASS Tags are available for
compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.
Page 14 of 48
February 2014
(Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 3350PMSMV
Final Part Number
335
(Options #)
(example: H10301)
. Stop
1 The
part numbers for non-adhesive labels to be used with the iCLASS Clamshell with the adhesive front are 1324GGN31 without slot and 1324GGV31 with slot.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
3 The external card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back.
2
February 2014
Page 15 of 48
Base Model
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
IMPORTANT Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a
badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 3904RNGCMNM
Final Part Number
Page 16 of 48
(Options #)
February 2014
Bit Numbers
. (example: 26 bit)
Format Number
(example: H10301)
Facility Code
.
SE Elite ICE Number (if applicable) (Custom Formats) Site Code
. City Code
.
OEM Code
.
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Bit Numbers
Format Number
Facility Code
SE Elite ICE Number (if applicable) (Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
Special Instructions:
. (example: 26 bit)
(example: H10301)
.
. City Code
. Stop
. Stop
.
.
.
.
.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot
punch target printed on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
February 2014
Page 17 of 48
Base Model
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
2nd
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 3964PNPGGNNM
Final Part Number
Page 18 of 48
(Options #)
February 2014
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot
punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
February 2014
Page 19 of 48
iCLASS SR Credentials
200/210 - iCLASS SR Card Ordering Guide
Maximized compatibility with added security into installations that DO contain standard iCLASS credentials.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
Standard Programming
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 2001HPGGNN
Final Part Number
(Options #)
Stop
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot
Punch.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 20 of 48
February 2014
Base Model
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2022HPGGNNN
Final Part Number
(Options #)
Bit Numbers
. (example: 26 bit)
Format Number
(example: H10301)
Facility Code
.
(Custom Formats) Site Code
. City Code
OEM Code
.
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Special Instructions:
.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot
punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 H slot punch option is not yet supported on iCLASS 16k or 32k memory options.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
February 2014
Page 21 of 48
Base Model
Front Packaging
N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork
Back Packaging
N - None
Key Numbering1
Additional Options3
N - None
Enter your final card options from the above selections. Example: 2052HNNMN
Final Part Number
205
(example: H10301)
. Stop
1 The
2
3
Page 22 of 48
February 2014
Back Packaging
S - Adhesive Backing
Slot Punch
N - None
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final Tag options from check boxes above. Example: 2062CSSNN
Final Part Number
206
(Options #)
(example: H10301)
.
. Stop
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices,
HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional iCLASS Tags are available for
compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.
February 2014
Page 23 of 48
Standard Programming
(Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 2080HPGSMV
Final Part Number
208
(Options #)
part numbers for non-adhesive labels to be used with the iCLASS Clamshell with the adhesive front are 1324GGN31 without slot and 1324GGV31 with slot.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
The external card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back.
Page 24 of 48
February 2014
Base Model
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2324HNGGNNN
Final Part Number
February 2014
(Options #)
Page 25 of 48
OEM Code
Bit Numbers
. (example: 26 bit)
Format Number
(example: H10301)
Facility Code
.
(Custom Formats) Site Code
. City Code
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Special Instructions:
.
OEM Code
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot
punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 26 of 48
February 2014
Base Model
2nd
Specify Artwork Number Refer to the Custom Artwork Forms for new artwork
Enter your final card options from the above selections. Example: 2524HOPGGMNNN
Final Part Number
February 2014
(Options #)
Page 27 of 48
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of
the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
2
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Page 28 of 48
February 2014
252/262 - iCLASS/Other 13.56 MHz (except LEGIC)/Prox Combination Card Ordering Guide
The iCLASS with MIFARE or DESFire contactless smart card as well as HID Proximity offers multiple High Frequency
technologies to simplify card issuance for diverse systems or migration projects. Add new applications while leveraging
your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or
anti-counterfeiting element.
For MIFARE Classic: This credential is only delivered with MIFARE Classic UID on 4 Bytes long only (32 Bit). It is not
available with 7 bytes UID for Classic, only for DESFire EV1.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2524HNGGNNN
Final Part Number
February 2014
(Options #)
Page 29 of 48
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of
the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
2
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Page 30 of 48
February 2014
Base Model
P - Programmed iCLASS only (SR) not 2nd Technology. Specify Programming Information.
C - Configured, Non-Programmed iCLASS . Non-programmed 2nd Technology. Programming Information
Not Required.
Slot Punch
N - No Slot Punch
(Specify Artwork Number Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 6004PANGGNNN
Final Part Number
February 2014
600
(Options #)
Page 31 of 48
. (example: 26 bit)
(example: H10301)
.
. City Code
. Stop
. Stop
Random: Length
.
.
.
.
.
. (example: 26 bit)
(example: H10301)
.
. City Code
.
.
. Stop
.
. Stop
.
.
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of
the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
2
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Page 32 of 48
February 2014
Base Model
Slot Punch
IMPORTANT Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a
badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
Specify Artwork Number Refer to the Custom Artwork Forms for new artwork.
Enter your final card options from the above selections. Example: 292OSKPGGNNNN
Final Part Number
February 2014
(Options #)
Page 33 of 48
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of
the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
2
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Page 34 of 48
February 2014
Base Model
Slot Punch
IMPORTANT Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a
badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 293OSKGGNNN
Final Part Number
(Options #)
. Stop
. Stop
.
.
.
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of
the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
2
February 2014
Page 35 of 48
Base Models
3400 (1K) Standard PVC
3450 (1K) Composite 40% Polyester / PVC *
(Specify Artwork Number Refer to the Custom Artwork forms for new artwork)
Enter your final card options from check boxes above. Example: 3400PGGNN
Final Part Number
(Options #)
Format Number
. OEM Code
(example: H10301)
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower
left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer
manufacturer prior to ordering.
6 Includes a permanent Unique MIFARE 32 Bit Serial number. The CSN is encoded MSB (Most Significant Byte) -> (LSB (Least Significant Byte).
* The composite construction is recommended for all cards with over-laminate applied.
1
2
Page 36 of 48
February 2014
Base Models
3500 (1K) Standard PVC
3550 (1K) Composite 40% Polyester / PVC *
P - Programmed with Security Identity Object (SIO) for MIFARE, Prox non-programmed
R - Both interfaces programmed (MIFARE with Security Identity Object (SIO), Prox
programmed with HID format)
Slot Punch
(Specify Artwork Number Refer to the Custom Artwork forms for new artwork)
Enter your final card options from check boxes above. Example: 3506PGGMNS
Final Part Number
(Options #)
February 2014
. OEM Code
2007 - 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 37 of 48
. OEM Code
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower
left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only.
4 For Laser Engraved external numbers, consult factory for lead times and cost. When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant
byte).
* The composite construction is recommended for all cards with over-laminate applied.
1
2
Page 38 of 48
February 2014
Base Model
Slot Punch
N - No Slot Punch
V - Vertical Slot Punch
H - Horizontal Slot Punch
(Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 3750CPGGNN
Final Part Number
(Options #)
. OEM Code
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower
left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot
be printed on cards.
4 For Laser Engraved external numbers, consult factory for lead times and cost. When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant
byte).
* The composite construction is recommended for all cards with over-laminate applied.
1
2
February 2014
2007 - 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 39 of 48
Base Model
P - Programmed with Security Identity Object (SIO) for DESFire, Prox non-programmed
R - Both interfaces programmed (DESFire with Security Identity Object (SIO), Prox
programmed with HID format)
Slot Punch
IMPORTANT MIFARE DESFire EV1 credentials do not allow a slot punch due to the antenna design, use a badge holder to
attach this card to a lanyard or badge clip.
N - No Slot Punch
(Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 3850CPGGNNN
Final Part Number
(Options #)
Page 40 of 48
. OEM Code
February 2014
. OEM Code
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower
left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot
be printed on cards.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
February 2014
2007 - 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 41 of 48
Base
Part No.
900
910
930
920
921
125 kHz
Interpreters1
N = No Prox
P = HID Prox and
EM4102 Prox
L = Indala Prox
13.56 MHz
Interpreters2
Controller
Communications
N = Wiegand
C = Clock-and-Data
P = OSDP using RS-485
Half Duplex
Controller
Hardware
Connection
N = Pigtail
T = Terminal Strip
Product
Version
Color
K = Black
G = Gray
Security3
0 = Standard-1
2 = Standard-2
E = Elite
Configuration
Settings4
0000 = Standard
XXXX = Specific
1 125
Page 42 of 48
February 2014
Sub
Class
R10
R15
R30
R40
RK40
multiCLASS SE
RP10
RP15
RP40
RP30
RPK40
February 2014
Prox/No
Prox
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF OFF
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF STD
LF SnnTD
LF STD
LF STD
LF STD
LF STD
Controller
Connection
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Wiegand
Color
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
Pigtail/
Terminal
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
PIG
TERM
Keys
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
STD-1
STD-1
STD-2
STD-2
LED
LED
Buzzer
Read
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
LED RED
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
FLSH GRN
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
BZR ON
Power
Mgmt
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
IPM OFF
Keypad
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
BFRD 1 KEY
Part number
900NTNNEK00000
900NTNTEK00000
900NNNNEK2037P
900NNNTEK2037P
910NTNNEK00000
910NTNTEK00000
910NNNNEK2037P
910NNNTEK2037P
930NTNNEK00000
930NTNTEK00000
930NNNNEK2037P
930NNNTEK2037P
920NTNNEK00000
920NTNTEK00000
920NNNNEK2037P
920NNNTEK2037P
921NTNNEK00000
921NTNTEK00000
921NNNNEK2037R
921NNNTEK2037R
900PTNNEK00000
900PTNTEK00000
900PNNNEK2037Q
900PNNTEK2037Q
910PTNNEK00000
910PTNTEK00000
910PNNNEK2037Q
910PNNTEK2037Q
920PTNNEK00000
920PTNTEK00000
920PNNNEK2037Q
920PNNTEK2037Q
930PTNNEK00000
930PTNTEK00000
930PNNNEK2037Q
930PNNTEK2037Q
921PTNNEK00000
921PTNTEK00000
921PNNNEK2037T
921PNNTEK2037T
Page 43 of 48
95A
N = No Prox
13.56 MHz
Interpreters1
Controller
Communication
N = Wiegand
C = Clock-and-Data
P = OSDP using
RS485 Half Duplex
Controller
Hardware
Connection
T = Terminal Strip
Product
Version
Color
K = Black
W= White
G= Gray
Security2
0 = Standard-1
2 = Standard-2
E = Elite
Configuration
Settings3
0000 = Standard
XXXX = Specific
1 13.56
MHz Interpreters
T = Recommended ONLY for Maximum Compatibility with legacy iCLASS installations - SIO, Seos, standard iCLASS HID Access Control Application, MIFARE CSN, and MIFARE DESFire CSN. Compatible with the following credentials: iCLASS SE,
iCLASS SR, standard iCLASS, SE for MIFARE Classic, SE for MIFARE DESFire EV1 and MIFARE-CSN. Use 0 or E for security options.
N = Recommended for Maximum Security Supports SIO and Seos to provide the maximum security data model for physical access control. Compatible only with iCLASS SE and Seos branded credentials. Use 2 or E for security options,
W = For custom programming options, consult your regional technical support representative. Custom programming configurations support up to two (2) of the following: MIFARE Classic, MIFARE DESFire EV1 (including DESFire 0.6 backward compatible
configurations). Additionally readers support ISO14443A CSN. W option for select regions only please check your local pricing options to determine if the option is available.
2 iCLASS Security Options (Factory or Field Configurable):
0 = Standard Security (Version 1) Keyset coupled with the Standard 13.56 MHz interpreter T provides compatibility with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
2 = Standard Security (Version 2) Keyset coupled with the SIO (Only) 13.56 MHz interpreter N provides compatibility with iCLASS SE, MIFARE Classic SE and MIFARE DESFire EV1 SE credentials.
E = Elite reads only SE Elite credentials with unique matching keys. Works with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item on PO requires ICE reference
number.
3 Configuration Settings
All standard readers ship with the following features - 13.56MHz interpreter T enabled, Wiegand N enabled, and Standard-1 0 security keys enabled. ANY other option selected requires a specific configuration EXTENSION. To order non-standard
configuration options, use the following link and select the iCLASS SE Configuration Worksheet under Related Documents. http://www.hidglobal.com/products/readers/iclass-se. Your HID Global support personnel or sales representative can help you
determine your final configuration.
Page 44 of 48
February 2014
Programming Cards
Use these cards for customer reader configuration. Readers may be reconfigured to a target configuration by applying the correct target configuration. Use the following link and select
the iCLASS SE Configuration Worksheet under Related Documents http://www.hidglobal.com/products/readers/iclass-se to determine the exact configuration required. Apply changes
to the reader security using programming cards. Contact HID Technical Support (support.hidglobal.com) to ensure selecting the proper settings.
Reader Configuration
Part Number
Description
Base Part No.
SEC9X-CRD-
E = Elite Key
0 = Standard key 1 or standard key 2
SEC9X-CRD-
Configuration Settings2
2 Configuration
February 2014
Page 45 of 48
Description
SEC9X-CRD-0-0007
SEC9X-CRD-E-0007
SEC9X-CRD-0-000B
SEC9X-CRD-E-000B
SEC9X-CRD-0-0121
SEC9X-CRD-E-0121
SEC9X-CRD-0-0220
SEC9X-CRD-E-0220
SEC9X-CRD-0-023M
SEC9X-CRD-E-023M
SEC9X-CRD-0-023U
SEC9X-CRD-E-023U
SEC9X-CRD-0-024K
SEC9X-CRD-E-024K
SEC9X-CRD-0-0261
SEC9X-CRD-E-0261
SEC9X-CRD-0-026M
SEC9X-CRD-E-026M
SEC9X-CRD-0-032V
SEC9X-CRD-E-032V
SEC9X-CRD-0-032Y
SEC9X-CRD-E-032Y
SEC9X-CRD-0-033A
SEC9X-CRD-E-033A
SEC9X-CRD-0-033B
SEC9X-CRD-E-033B
SEC9X-CRD-0-034C
SEC9X-CRD-E-034C
SEC9X-CRD-0-034D
SEC9X-CRD-E-034D
SEC9X-CRD-0-034E
SEC9X-CRD-E-034E
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS/CAK/PKI, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS/CAK/PKI, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF CST, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF CST, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF CST, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF CST, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS/FIPS/CAK, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH OFF, BZR OFF, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH OFF, BZR OFF, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF CST, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH GRN, BZR OFF, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF CST, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH GRN, BZR OFF, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 TO 5 KEYS, PAR, USER ENTRD FC, 26-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 TO 5 KEYS, PAR, USER ENTRD FC, 26-BIT MSG, IPM OFF
SEC9X-CRD-0-034F
SEC9X-CRD-E-034F
SEC9X-CRD-0-034G
SEC9X-CRD-E-034G
SEC9X-CRD-0-034H
SEC9X-CRD-E-034H
SEC9X-CRD-0-034J
SEC9X-CRD-E-034J
SEC9X-CRD-0-034K
SEC9X-CRD-E-034K
SEC9X-CRD-0-034L
SEC9X-CRD-E-034L
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 34-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 34-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, NO PAR, 4-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR OFF, OPT TAMP, OPEN COLL, CSN 56-BIT MSB, 56-BIT BCD, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR OFF, OPT TAMP, OPEN COLL, CSN 56-BIT MSB, 56-BIT BCD, IPM OFF
CFG CARD, SE, STD, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 KEY, PAR, 6-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF OFF, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 KEY, PAR, 6-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF CST, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF CST, HF STD/SIO/SEOS, 485FDX, LED RED, FLSH OFF, BZR ON, OPT TAMP, OPEN COLL, CSN 26-BIT (W/DEFAULT FC), KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, STD, LF STD, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
CFG CARD, SE, ELITE, LF STD, HF STD/SIO/SEOS, 485FDX, LED OFF, FLSH GRN, BZR ON, OPT TAMP, OPEN COLL, CSN 32-BIT LSB, KPF, BFFRD 1 KEY, DORADO COMPL, NO PAR, 8-BIT MSG, IPM OFF
Page 46 of 48
February 2014
Part Number
SEF9X-UPG
Security
0 = Standard-1
2 = Standard-2
E = Elite
Version
D = Rev D version
E = Rev E version
Firmware Bundle1
XXXX
Obtain the firmware bundle number after consultation with your HID support representative (support.hidglobal.com).
February 2014
Page 47 of 48
Accessories
The following provides accessories that can be ordered separately for your iCLASS SE and multiCLASS SE readers.
Part Number
Description
R10 / RP10 (or equivalent sized model) Mini-Mullion Reader Mounting Plate, Any Color
6309-103-01
R15 / RP15 (or equivalent sized model) Mullion Reader Mounting Plate, Any Color
6402-103-01
R30 / RP30 (or equivalent sized model) EU/Asian Reader Mounting Plate, Any Color
6403-109-01
R40 / RP40 (or equivalent sized model) Wall Switch Reader Mounting Plate, Any Color
6094-101-01
RK40 / RPK40 (or equivalent sized model) Wall Switch Keypad Reader Mounting Plate, Any Color
6132AKB
R10 / RP10 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AGB
R10 / RP10 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Gray
6132AKC
R15 / RP15 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AGC
R15 / RP15 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Gray
6132AKD
R30 / RP30 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AGD
R30 / RP30 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Gray
6132AKE
R40 / RP40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black
6132AGE
R40 / RP40(or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Gray
6132AK
RK40 / RPK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black
6132AG
RK40 / RPK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Gray
400-2D71-06
6706-303-03
Pigtail Accessory Kit (includes terminal blocks, screws, and installation guide
6706-303-04
Terminal Reader Accessory Kit (includes terminal blocks, screws, and installation guide)
56-0009-01
Part Number
SE-OSDP-1
SE-OSDP-5
SE-OSDP-10
Page 48 of 48
February 2014