Sie sind auf Seite 1von 6

NMDC LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)


10-3-311/A, Khanij Bhavan, Castle Hills, Masab Tank,
Hyderabad 500028,

TENDER DOCUMENT
For
Plant Road Network Phase-II (Package No. 9b) for 3.0 MTPA Integrated Steel Plant at Nagarnar (near
Jagdalpur), District Bastar, Chhattisgarh
VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

NMDC - 3.0 Mt./Yr. Integrated Steel Plant at Nagarnar : Price Schedule


PACKAGE - Plant Road Network, Phase-II. PKG. No : EW-9b
Item No.

Description

Unit

Qty

Rate in Rupees

Basic

RD-1

a)Earthwork in excavation in all types of soil (hard rock requiring blasting and/or chiseling for rock items will be
measured separately ), for formation of road sub grade to correct levels and cambers, for sub grade preparation
wherever required for roads by removing unsuitable material up to specified depth as per drawings, specifications
and instruction of the engineer at all heights and depths, both in dry and wet conditions, dewatering of surface and
sub-surface water, shoring and strutting (if re-quired), leveling and dressing the sub-grade, including stacking of
material (both soil and rock separately)with in a lead of 500m, at locations as directed, with all bye works
complete as per drawing, specification and direction of the engineer. (Payment shall be made for the quantity
computed for the theoretical excavation volume only as per drawing i.e. for the volume of the block of excavation
having bottom dimensions as per drawing and the actual authorized depth).

Cum

141,700

b) Same as RD -1 but for hard dock requires control blasting

Cum

1,000

c) Same as RD -1 but for hard dock requires Chiseling

Cum

500

RD-2

Sub grade preparation required for laying granular base suiting to MORTH specifications including replacing 500
mm thick excavated depth with compacted muram brought from outside to fill in layers not exceeding 200mm
thick as per note 1a of enclosed drawing

Cum

106,000

RD-3

Sub grade preparation required for laying granular base suiting to MORTH specifications including replacing 150
mm thick excavated depth with compacted murum fill in layers as per note 1a of enclosed drawing

Cum

NIL

RD-4

Construction of 260 mm thick granular sub base(Coarse graded) as per clause no 6.2.1 of IRC-15 and MORTH at
all locations including in shoulders by providing graded material confirming to grading I of table 400-2 mixing in a
mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor
grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete
as per clause 401 as per MORTH specifications complete in all respects

Cum

56,000

RD-5

Construction of 250 mm thick granular base WMM (fine graded) as per clause no 406.2.1.2 of MORTH at all
locations including in shoulders by providing graded material confirming to grading I of table 400-II mixing in a
mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with mortor
grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete
as per clause 401 as per MORTH specifications complete in all respects.

Cum

40,030

Total Amount
Including Duties
Total Duties Total Including & Taxes in Rs.
& Taxes
Duties & Taxes
Lakhs

VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

NMDC - 3.0 Mt./Yr. Integrated Steel Plant at Nagarnar : Price Schedule


PACKAGE - Plant Road Network, Phase-II. PKG. No : EW-9b
Item No.

Description

Unit

Qty

Rate in Rupees

Basic

RD-6

Transportation, carriage and disposal of surplus unsuitable excavated earth, rock/boulders into low lying areas
etc. including loading, unloading, stacking, compacting to achieve field dry density of 95% modified proctor density
for cohesive & semi-cohesive soil or 70% relative density for cohesion less soil leveling by mechanical means,
dressing etc. with all bye-works complete as per specification and instruction of the engineer.

(a)
(b)
(c)
(d)
(e)
RD-7

Beyond initial lead of 500m & upto 1.0 km


Beyond initial lead of 1.0 km & upto 2.0 km
Beyond initial lead of 2.0 km & upto 3.0 km
Beyond initial lead of 3.0 km & upto 4.0 km
Beyond initial lead of 4.0 km & upto 5.0 km
RRemoval of unsuitable fill such as cinder, boiler ash and other low density material observed at sub grade level
up to a depth equal to width of such observed material/or depth of such fill which ever is less and replacing by
providing good quality moorum not exceeding 200mm well compacted layers to achieve field dry density of 95%
modified proctor density for cohesive & semi-cohesive soil or 70% relative density for cohesion less soil
complete with all bye works as per drawing, specification and instruc-tions of the engineer

RD-8

Earthwork in embankment for roads of permanent nature , railways and bunds etc. at all heights and depths to
correct slopes and grades including compaction in layers of 15 cm thickness to achieve field dry density of 95%
modified proctor density for cohesive & semi-cohesive soil or 70% relative density for cohesion less soil,
dressing to profile, trimming etc. complete as directed including trans-porting, loading, unloading, and depositing
etc. with all bye works complete as per drawing, specifications and instruction of the engineer. (Measurement for
payment shall be as per finished profile of embankment after compaction.)With approved borrowed soil from land
arranged by contractor from out side Plant

RD-9

With approved borrowed soil from land arranged by contractor from out side Plant
Supplying and providing 40 mm thick close graded pre mix surfacing of type A including providing necessary
primer coat as per specification (0.54 cum of aggregate and 44 Kg of bitumen for 10 sqm of area) on road surface
with all bye works as per specifications directions of engineer in charge.

Cum
Cum
Cum
Cum
Cum
Cum

13,200
26,700
26,700
26,700
40,000
5,000

Cum
Sqm

1,000
195,300

Total Amount
Including Duties
Total Duties Total Including & Taxes in Rs.
& Taxes
Duties & Taxes
Lakhs

VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

NMDC - 3.0 Mt./Yr. Integrated Steel Plant at Nagarnar : Price Schedule


PACKAGE - Plant Road Network, Phase-II. PKG. No : EW-9b
Item No.

Description

Unit

Qty

Rate in Rupees

Basic

RD-10

Providing controlled earth filling (suitable earth obtained from excavation) in shoulders in layers of 10 cm, to
achieve dry density of 95% modified proctor density, including reclaiming, transporting, loading, unloading,
depositing, compacting, dressing, trimming, watering, compaction by power roller with all bye works complete as
per drawing, specification and instruction of the engineer
Providing controlled earth filling (suitable earth obtained from excavation) in central median including reclaiming,
transporting, loading, unloading, depositing, compacting in layers not exceeding 200mm , dressing, trimming,
watering, with all bye works complete as per drawing, specification and instruction of the engineer

Cum

14,000

Cum

4,200

Providing and laying 25mm thick expansion joint(confirming to IS 1838 Part-1) with approved bitumen
impregnated fibre board including provision of bituminous paint( grade 80/100) on the sides, at all heights and
locations with all bye-works complete as per drawing, standard practice and as directed by the engineer

Sqm

10

10 mm thick cement plaster in CM 1:4 to concrete surfaces like medians, roundabouts(above ground portion only)
any other location with all bye-works, dabbing, curing, scaffolding complete at all heights and depths as per
drawing and specification
RD-14a Supplying and laying of reinforced cement concrete of grade M-20 with stone aggregate 20 mm and down
(excluding formwork and reinforcement) in construction of median and any other works both in below ground and
for super structure at all depths and heights with all bye-works complete as per drawings, specifications and
instruction of the engineer
RD-14b Same as above but using M 25 grade concrete in drains, culverts, walls ,slabs etc
RD-15 Preparing bar bending schedules, supplying, fabricating and fixing in position steel reinforcement at all levels and
positions including cost of reinforcement steel , straightening, cutting, bending, cranking, binding, welding etc.
as per drawings and specifications, including cost of binding wire labour etc., all complete, for reinforced
concrete and reinforced brick work and any other place as specified. (Payment will be made on the basis of
standard weight per metre length of the bar).

Sqm

2,100

Cum

800

Cum
MT

315
110

Sqm

11,600

RD-11

RD-12

RD-13

RD-16

Providing and fixing all types and shapes of centering, shuttering, strutting and propping firmly with screws,
bolts, separators, tension devices, true to line and level including stripping off the same from positions for
RCC/PCC(if not covered in respective item) works at all depths and heights with all bye-works complete as per
drawing, specification and instruction of the engineer.
In all types of foundations, walls, beams, slabs

Total Amount
Including Duties
Total Duties Total Including & Taxes in Rs.
& Taxes
Duties & Taxes
Lakhs

VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

NMDC - 3.0 Mt./Yr. Integrated Steel Plant at Nagarnar : Price Schedule


PACKAGE - Plant Road Network, Phase-II. PKG. No : EW-9b
Item No.

Description

Unit

Qty

Rate in Rupees

Basic

RD-17

Supplying and laying plain cement concrete of Grade M-7.5 with stone aggregate of 40 mm and down size
(including formwork if required), in all leveling courses in medians , in drains, pits including mass concrete etc at
all heights & depths with all bye-works complete as per drawing, specification and instruction of the engi-neer.

Cum

260

RD-18

a)Providing and laying dry stone pitching with approved quality stone (average thickness 300 mm) including
preparation of the surface to the required gradient, filling the interstices with smaller stones etc. all complete as
per specification and instruction of the engineer
b)Same as above but using cement pointing with cement mortar at joints 1:3 as per drawings, specifications and
as directed by the engineer

Sqm

1,000

Sqm

1,000

RD-19

Dismantling the masonry work of cement concrete block in cement mortar of all proportion for under ground
including disposing off the unserviceable materials up to a lead of 3 Km within plant boundary with all bye works
such as excavation for under ground works as per the direc-tion of the Engineer-in-Charge including
transportation as required

Cum

325

RD-20

Dismantling the PCC work of all grades/ proportion for under ground including disposing off the unserviceable
materials up to a lead of 3 Km within plant boundary with all bye works such as excavation for under ground
works as per the direction of the Engineer-in-Charge including transportation as required

Cum

80

RD-21

Dismantling the RCC works of pits, medians all grades/ proportion for under ground including disposing off the
unserviceable materials up to a lead of 3 Km within plant boundary with all bye works such as excavation as per
the direc-tion of the Engineer-in-Charge including transportation

Cum

12

RD-22

Supplying and laying 200MM dia RCC non-pressure pipes of (NP 2 Class) including collars, jointed with stiff
mixture of cement mortar in 1:2 proportion and aligning, jointing etc., to correct slopes including all bye-works,
complete, as per specifications and instruction of the Engineer Excavation, concrete used for bedding , disposal
of surplus earth will be paid separately under normal items.

Rm

1,000

RD-23

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications (as base
course/profile correction course) in uniform/desired thickness, hand picking, rolling with 3 wheeled road/vibratory
roller 8-10 tonne capacity in stages to proper grade and camber, applying and requisite type of screening/binding
material to fill up interstices of coarse aggregate, watering and compacting to the require density for repair of
existing BM and also slope correction.(average thickness 75 mm)

Cum

4,380

Total Amount
Including Duties
Total Duties Total Including & Taxes in Rs.
& Taxes
Duties & Taxes
Lakhs

VOLUME III
(BILL OF QUANTITIES)
Tender Enquiry No. : HO (Contracts)/NISP/PRN/PH-II/2014/444

Date: 07.01.2015

NMDC - 3.0 Mt./Yr. Integrated Steel Plant at Nagarnar : Price Schedule


PACKAGE - Plant Road Network, Phase-II. PKG. No : EW-9b
Item No.

Description

Unit

Qty

Rate in Rupees

Basic

RD-24

Providing, laying, spreading and consolidating of DENSE BITUMINOUS MACADAM (Grading 1) mechanically on
cleared and prepared road surface with specified graded crushed aggregate conforming to MORTH table
500.10(4th revision) including prime coat, cost of labour, all tools & plants, transporting, loading ,unloading and
depositing all leads and lifts with all bye work complete as per specification, drawing and direction of E/I(payment
shall be made for actual consolidated thickness) as per MORTH specification Clause No.507.

Cum

2,300

RD-25

Providing and laying bituminous concrete , using crushed aggregates of specified grading (Grading 1), premixed
with bituminous binder @ 5.4 to 5.6 percent of mix and filler, including tack coat, transporting the hot mix to work
sit, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification
Clause No. 509 complete in all respects

Cum

1,150

TOTAL PACKAGE COST

Total Duties & Taxes included in the above price with rates (Rs Lakhs)
Service Tax (Rs Lakhs)
Vat (Rs Lakhs)
Any other Duties & Taxes (Please specify) (Rs Lakhs)
Note -

1
2

Bidders are requested to also submit the offer in soft file (Excel) in CD format.
If there is any discrepancy in description of work, then descriptions as given in TS will prevail.

Total Amount
Including Duties
Total Duties Total Including & Taxes in Rs.
& Taxes
Duties & Taxes
Lakhs

Das könnte Ihnen auch gefallen