Beruflich Dokumente
Kultur Dokumente
WireScope Pro
An Expandable Platform
WireScope Pro supports copper cable
certification to TIA Categories 3 to 6A
and ISO Classes C to E, Class EA and F
limits. Sweeping a full 1 GHz in a few
seconds, it boosts Cat 6A and Class F
autotest measurement times to
industry leading speed, and provides a
future proof platform.
Unique Alien Crosstalk Testing
Methodology
In combination with Agilents newly
developed Alien Crosstalk Stimulators,
WireScope Pro secures critical
10 Gigabit Ethernet installations and
upgrades. The new SwiftAXT (Sweep
Interleaved Frequency-domain
Technique for Alien Crosstalk)
technology offers a breakthrough in
measurement time, cost of ownership,
degree of automation and ease of use,
making the method uniquely field
suitable and convenient.
Faster Measurement and Optimized
Workflow
Once connected, the DualRemote Pro
unit operates entirely remote
controlled. User interactions, including
restarting running tests, happen on the
near end only. The re-designed Fiber
SmartProbes eliminate the need to
swap fibers for dual-wavelength
testing and calibration, optimizing the
test throughput and accuracy.
WireScope Pro
Ease of Use
1 MHz 1 GHz
3/5/5e/6
3/5/5e/6/6A
C, D, E
C, D, E, EA, F
Feature
WireScope 350
Measurement Accuracy
ISO Level IV
not available
optional
Talkset , full-duplex
single wavelength
probes, require fiber
swapping
dual-wavelength
probes, no fiber
swapping
Removable Memory
Rechargeable Battery
Li-Ion, 8 hours of
typical use
Dimensions (H x W x D)
228 x 114 x 66 mm
(8.9 x 4.5 x 2.6)
General Specifications
Test Parameters
Connectivity
Environmental Conditions
Operating Temperature
0C to +40C
Storage Temperature
10C to +55C
Relative Humidity
10% to 80%
Operating Altitude
up to 3000 meters
Software Upgrade
Pollution Degree: 2
Semi-automated software upgrade
using USB Flash Drive or special USB
cable (included).
User Interface
56 mm x 150 mm (2.2 x 5.9)
touch-sensitive color LCD display
Dimensions
Size: 232 mm x 126 mm x 86.7 mm
(9.13 x 4.96 x 3.41)
Weight: approx. 1.36 kg
(approx. 3.0 lbs.)
Page 2 of 8
General Specifications
Size: 79.5 mm x 60.5 mm x 44 mm
(3.1 x 2.4 x 1.7), excludes cable
Operating Temperature
0C to +40C
Storage Temperature
40C to +55C
Measurement Parameter
Range
Resolution
Accuracy
Length
1m
0 1100 ns
1 ns
6 ns
Attenuation
60 dB
0.1 dB
[1]
90 dB
0.1 dB
[1]
90 dB
0.1 dB
[1]
Resistance [3]
5 1000 Ohm
1 Ohm
5%
Network Specifications
Cabling Standards
Ethernet
Legacy Networks
Supported Tests
[1] If not mentioned otherwise, specifications are according to ISO Level IV definition.
[2] The term Category 7 has been widely used as a synonym of ISO/IEC Class F, yet it is not a TIA/EIA standardized term. Product labels and
documentation may contain either term. Future documents and labels will use the term Class F.
[3] Available only for DC coupled structured cabling.
Page 3 of 8
N2647MM Multimode (850 nm/1300 nm) and N2647SM Single Mode (1310 nm/1550 nm) Fiber SmartProbes
Dual-wavelength Fiber SmartProbes
allow the WireScope Pro to measure
length and propagation delay on
optical fiber links. Also, they enable
high-performance optical loss and
power measurement.
General Specifications
Operating Temperature
0C to +40C
Size: 79.5 mm x 64 mm x 44 mm
(3.1 x 2.5 x 1.7)
Connectors
2 x SC (Transmitter, Receiver)
Storage Temperature
40C to +55C
Detector Type
InGaAs
InGaAs
Calibrated Wavelengths
Measurement Accuracy
0 to 42 dBm
0 to 50 dBm
Source Type
LED
Fabry-Perot Laser
Center Wavelength
Output Power
Laser Stability
n/a
Cabling Standards
Ethernet
Legacy Networks
100BASE-FX
10BASE-FL, -FB, Token Ring
100BASE-LX10
ATM/SONET
ATM-622,
ATM/SONET OC-3, OC-12, OC-48
FDDI/Fiber Channel
FDDI
Power Meter
Transmitter
Propagation Delay
Accuracy (whichever is greater)
2% or 3.6 ns
Resolution
4.2 ns
Measurement Range
0 to 300 s
Fiber Length
Accuracy (whichever is greater)
2% or 0.72 m
2% or 0.72 m
Resolution
Distance Range
Page 4 of 8
N2648A Alien Crosstalk Test Kits Validation of Structured Cabling for 10GBASE-T Transmission
Real-time Spectral Analysis of
External Noise
SwiftAXT A Scalable
Measurement Approach
Agilents new Sweep Interleaved
Frequency-domain Technique for Alien
Crosstalk Testing (SwiftAXT) is a
revolutionary concept inspired by the
need to test Alien Crosstalk in
10GBASE-T ready network cabling. It
radically simplifies the field verification
of structured cabling for the
deployment of 10GBASE-T. It is as
straightforward as simple, modeled
after the real network where cable
bundles join and split, come from, and
end in different places, and have a
wide range of lengths.
Unique Alien Crosstalk Testing
Methodology
To measure Alien Crosstalk,
WireScope Pro and DualRemote Pro
are attached to the disturbed (victim)
cable. A pair of Alien Crosstalk
stimulators is connected to both ends
of each disturber cable. Crosstalk from
one to 32 disturber cables can be
captured simultaneously, at no
expense in measurement time. Every
stimulator pair stimulates each
frequency of interest. The coupled
Alien Crosstalk signal is received by
WireScope Pro and DualRemote Pro at
the local and at the far end of the
victim cable. Precision timing control
is the key to accurately measuring the
Alien Crosstalk in one measurement
sweep from any number of disturber
cables, in less than 5 minutes.
Page 5 of 8
Alien Crosstalk
Stimulators
Transmit Mode
disturber cable
disturber cable
disturber cable
Operating Temperature
+10C to +40C
General Specifications
Storage Temperature
40C to +70C
victim cable
disturber cable
Alien Crosstalk
Stimulators
Transmit Mode
disturber cable
disturber cable
SwiftAXT Alien Crosstalk Test Concept (6 around 1), near end transmitting)
Relative Humidity
95% at up to 31C temperature
RF Output Power
1.5 dBm 2 dB
2 dB
< 95 dB
3 sec
Supported Tests
All parameters measured from near end and far end
Page 6 of 8
Alien Crosstalk
Stimulators
Terminate Mode
DualRemote Pro
WireScope Pro
Alien Crosstalk
Stimulators
Terminate Mode
Ordering Information
[1]
Class F SmartProbes
(each set includes two units)
Important Note: the N2641A-300
Class F Precision Calibration
SmartProbe is required for user
calibration prior to all Class F
measurements.
N2641A-300 Class F Precision
Calibration SmartProbe.
N2644A-104 Siemon Class F TERA
Channel SmartProbe
Page 7 of 8
Other SmartProbes
N2644A-001 Bare Wire SmartProbe
(set of 2 units)
N2644A-065 Siemon S210 A Block
SmartProbe (single unit)
N2644A-066 Siemon S210 B Block
SmartProbe (single unit)
Optional Accessories
N2643A-100 Upgrade License for
Category 6A/7/ Class EA/F Cable Test,
Alien Crosstalk Test and External
Noise Measurement
NEW! N2640A-010 Professional
Network Test Software License for
WireScope Pro (for details, refer to the
technical datasheet, p/n 5989-7957EN)
N2641A-090 Replacement Accessories
Bundle, WireScope Pro
N2641A-095 256 MB USB Flash Drive,
WireScope Pro
N2605A-132 Soft Carrying Case
N2641A-134 Hard Carrying Case,
WireScope Pro
N2641A-135 Rechargeable Battery
Pack, WireScope Pro
N2641A-097 Special USB Cable,
WireScope Pro (pack of 5 cables)
N2595A-094 Auto Lighter DC Power
Adapter
N2641A-080 Universal AC Adapter,
WireScope Pro
N2648A-001 Alien Crosstalk
stimulator, single replacement unit
www.agilent.com
www.agilent.com/find/wirescope
United States
1 800 829 4444
1 800 829 4433 (FAX)
Canada
1 877 894 4414
1 888 900 8921 (FAX)
Europe
(31) (0) 20 547 2111
(31) (0) 20 547 2190 (FAX)
Latin America
(55) 11 4197 3600
(55) 11 4197 3800 (FAX)
Australia
1 800 629 485
1 800 142 134 (FAX)
Hongkong
800 930 871
(852) 2506 9233 (FAX)
Singapore
1800-375 8100
(65) 6755 0042 (FAX)
Malaysia
1 800 888 848
1 800 801 664 (FAX)
China
800 810 0189
800 820 2816 (FAX)
Taiwan
0800 047 866
0800 286 331 (FAX)
India
1800 112 929
1800 113 035 (FAX)
Thailand
(66) (2) 268 1345
(66) (2) 268 1346 (FAX)
Japan
0120 421 345
0120 421 678 (FAX)
5989-5203EN