Beruflich Dokumente
Kultur Dokumente
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _intersect
Select objects: 1 found
Select objects: 1 found, 2 total
Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube/Length]: L
Specify length <5.0000>: 2.5
Specify width <5.0000>: 2.5
Specify height or [2Point] <1.0000>: 1
Command: _line Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: *Cancel*
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: Specify second point:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _explode
Select objects: 1 found
Select objects:
Command:
Command:
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>: 360
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command:
Command: _union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command: _union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube/Length]: L
Specify length <0.3000>: 3.7
Specify width <3.7000>: 3.7
Specify height or [2Point] <2.7601>: 1
Command: _fillet
Current settings: Mode = TRIM, Radius = 4.1231
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <4.1231>: Specify second point:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _explode
Select objects: 1 found
Select objects:
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or