Beruflich Dokumente
Kultur Dokumente
Control units that meet your requirements. ScadaMate CX Switches are available with a wide range of controls to match your automation objectives.
For remote supervisory control applications, the
5800Series Automatic Switch Control combines sophisticated automatic control schemes with RTU functionality,
data logging, and advanced communication capabilities
in a single package. It can manage switches and automatically sectionalize a feeder based on factors such as overcurrent, loss of voltage, and phase unbalance. One control
can automate one, two, or three switches, and multiple
controls can be programmed to communicate with each
other using the optional IntelliTEAM IIAutomatic Restoration System.
Scada-Mate CX Switches can alternately be furnished
with a custom-engineered communication and control
unit that provides the interface between the switch and
the master-station computer. The communication and
control unit can accommodate a remote terminal device
of any manufacture. It can either be powered by a customer-supplied source or S&C Current/Voltage Sensors
on the Scada-Mate CX Switch.
And for source-transfer applications utilizing two
Scada-Mate CX Switches, a 5800 Series Automatic Switch
Control can be furnishedwhich provides transfer in as
little as 70 cycles.
Disconnect pull-ring
Manual-operation
pull-ring
Optional visible-break disconnect.
Mounting angle
25-kV Scada-Mate CX Switch in the uprightcompact mounting configuration, with optional visible-break disconnect.
SCADA-MATE CX SWITCHES
60-Hz Rating (50-Hz Rating in Parentheses)
kV1
Mounting
Configuration
Upright 2
Upright
Extra Mounting-Pole
Clearance 2
UprightCompact 2
Tiered-Outboard 7
Amperes, RMS
BIL
Cont. and
Interr.34
Mom.,
Asym.5
Nom.
Max
14.4
17.0
110
900
25 000
20 000
(10) j
(15)
(110)
(900)
(25 000)
(20 000)
25
29
150
900
25 000
20 000
(20) j
(24)
(150)
(900)
(25 000)
(20 000)
14.4
17.0
110
900
25 000
20 000
(10) j
(15)
(110)
(900)
(25 000)
(20 000)
25
29
150
900
25 000
20 000
(20) j
(24)
(150)
(900)
(25 000)
(20 000)
14.4
17.0
110
900
25 000
20 000
(10) j
(15)
(110)
(900)
(25 000)
(20 000)
25
29
150
900
25 000
20 000
(20) j
(24)
(150)
(900)
(25 000)
(20 000)
14.4
17.0
110
900
25 000
20 000
(10) j
(15)
(110)
(900)
(25 000)
(20 000)
25
29
150
900
25 000
20 000
(20) j
(24)
(150)
(900)
(25 000)
(20 000)
Catalog Number
358112
358113
358212
358213
358612
358613
358412
358413
Number Suffix -D, can carry up to 900 amperes continuous in ambient temperatures to 40C with a minimum wind velocity of two feet per
second. Maximum allowable conductor temperature is 90C. Without a
minimum wind velocity of two feet per second, these switches can carry
up to 630 amperes continuous.
7 Switches in the tiered-outboard mounting configuration are not available with the optional disconnect -D.
Printed in U.S.A.
apply: 50 miles (80.45 km) of line, 12 miles (19.31 km) of 1/0 cable, or
5miles (8.05 km) of 1000 kc mil cable, or equivalent.
900amperes.