Beruflich Dokumente
Kultur Dokumente
www.philips.com/welcome
EN
User manual
Troubleshooting
34
E ng li s h
221TE4L
www.philips.com/support
Model
Serial
Country
Code
Telephone number
Tariff
Austria
+43
0810 000206
0.07
Belgium
+32
078 250851
0.06
Denmark
+45
3525 8761
Finland
+358
09 2290 1908
France
+33
082161 1658
0.09
Germany
+49
0.09
Greece
+30
Free of charge
Ireland
+353
01 601 1161
Italy
+39
Luxembourg
+352
26 84 30 00
The Netherlands
+31
Norway
+47
2270 8250
Poland
+48
0223491505
Portugal
+351
2 1359 1440
Spain
+34
Sweden
+46
08 632 0016
Switzerland
+41
02 2310 2116
United Kingdom
+44
0.08
Local call tariff
0.10
0.10
www.philips.com/welcome
This information is correct at the time of press. For updated information, see www.philips.com/support.
Downloaded from www.Manualslib.com manuals search engine
8 Settings
1 Notice
2 Important
Back connector
Side connector
Use a Conditional Access Module
Use Philips EasyLink
5
6
7
7
4 Controls
Side control buttons
Remote control
5 Start to use
9
9
10
11
6 Product information
Supported display resolutions
Tuner/Reception/Transmission
Remote control
Power
Supported monitor mounts
7 TV/Channel installation
Automatically install channels
Manually install channels
Rename channels
Rearrange channels
Test digital reception
14
14
14
14
14
14
18
Access TV menus
Change picture and sound settings
Use the universal access menu
Use advanced teletext features
Create and use lists of favourite channels
Use the Electronic Programme Guide
Display the TV clock
Use timers
Lock unsuitable content
Change language
Update the TV software
Change TV preferences
Start a TV demo
Reset the TV to factory settings
9 Multimedia
29
29
10 Pixel policy
31
11 Troubleshooting
34
34
34
34
35
35
35
35
15
15
16
16
17
17
EN
Downloaded from www.Manualslib.com manuals search engine
18
18
21
22
22
23
24
25
25
26
27
28
28
28
E ng li s h
Contents
1 Notice
2012 Koninklijke Philips Electronics N.V.
All rights reserved.
Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips
Electronics N.V. and are used under licence
from Koninklijke Philips Electronics N.V.
notice.
Warranty
Risk of injury, damage to monitor or void
of warranty! Never attempt to repair the
monitor yourself.
Use the monitor and accessories only as
intended by the manufacturer.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
Warranty coverage begins from the day
you purchase your monitor. For two years
thereafter, your monitor will be replaced
by at least an equivalent monitor in case
of defects provided by the warranty
coverage.
Pixel characteristics
This monitor product has a high number
of color pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.
Please refer to the Pixel Policy section in
this manual for details.
EN
1
2
3
In order to maintain conformity to the
EMC directive, the mains plug on this
product must not be detached from the
mains cord cable.
Copyright
Safety
EN
Downloaded from www.Manualslib.com manuals search engine
E ng li s h
2 Important
&$
"
Never place the monitor or any objects
on the power cord.
To easily disconnect the monitor power
cord from the power outlet, ensure that
you have full access to the power cord at
all times.
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the monitor from the power
outlet and aerial before lightning storms.
During lightning storms, never touch any
part of the monitor, power cord or aerial
cable.
Risk of hearing damage! Avoid using
earphones or headphones at high
volumes or for prolonged periods of time.
If the monitor is transported in
temperatures below 5C, unpack the
monitor and wait until the monitor
temperature matches the room
temperature before connecting the
monitor to the power outlet.
Recycling
Screen care
EN
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
E ng li s h
Back connector
5
EN
Downloaded from www.Manualslib.com manuals search engine
d HEADPHONE
Audio output to your headphones.
h SPDIF OUT
Digital audio output to home theaters
and other digital audio systems.
e HDMI
Digital audio and video input from high
+;&
players.
Side connector
f SERV. U
For use by service personnel only.
g PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
a COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
VGA
EN
b USB
For music and photo.
Note
E ng li s h
OPTIONS.
1. Press
EN
Downloaded from www.Manualslib.com manuals search engine
EN
ADJUST.
E ng li s h
4 Controls
Select an input source.
Return to the previous screen or exit
from the on-screen menu.
c
5
!"#
$
Display the on-screen menu.
<
1
6
EN
Downloaded from www.Manualslib.com manuals search engine
Remote control
CH - / CH + (Previous/Next)
Switch channels or navigate through menu
pages, tracks, albums or folders.
SOURCE
Select connected devices.
(Mute)
Switch the sound On or Off.
1
2
17
h +/- (Volume)
Increase or decrease the volume.
i 0-9 ( Numeric buttons )
Select a channel.
3
4
16
15
14
13
6
7
k TEXT
Enable or disable teletext
12
j SUBTITLE
Enable or disable subtitles.
OPTION
Access options for the current activity or
selection.
m
10
11
(Standby-On)
Switch the monitor to standby if the
monitor is on.
Switch the monitor on if the monitor
is in standby.
b Play buttons
Control video or music.
c
FIND
Access the menu to select a TV channel
list.
(Home)
Access the home menu.
10
EN
(Back)
Return to the previous screen.
Return to the last viewed channel.
n OK
<
&
o
(Navigation buttons)
Navigate through menus and select items.
ADJUST
Access the menu to adjust settings.
q Colour buttons
Select tasks or options.
To switch on
To switch to standby
Press (Standby-On) on the remote
control.
The standby indicator switches to red.
To switch off
Press POWER at the side of the
monitor.
The standby indicator switches off.
Tip
Though your monitor consumes very little
power when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the monitor power
cable from the power outlet.
Note
If you cannot locate your remote control and
want to switch on the monitor from standby,
press POWER at the side of the monitor.
EN
Downloaded from www.Manualslib.com manuals search engine
11
E ng li s h
5 Start to use
Switch channels
TV
EXT 1
EXT 2
VGA
HDMI
1. Press
list.
12
EN
2. Press
SOURCE$Z [
device.
3. Press OK to confirm your selection.
E ng li s h
EN
Downloaded from www.Manualslib.com manuals search engine
13
6 Product
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Remote control
Power
Computer formats
Video formats
Tuner/Reception/Transmission
14
EN
Required
pitch (mm)
Required
mounting bolts
21.5
100 x 100
4 x M4
23
100 x 100
4 x M4
? ;
@@
> ;
;
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
Select Re-install channels to search and
store all channels. Select update
channels to update your current list.
Update channels
Re-install Channels
Cancel
1. Press
Picture
Menu language
Sound
Sleep timer
EasyLink
Location
Preferences
Volume bar
Factory settings
Reinstall TV
1. Press
EN
Downloaded from www.Manualslib.com manuals search engine
15
E ng li s h
7 TV/Channel
installation
Channel installation
Child lock
? ;
Note
Skip this step if your system settings are correct.
1. Press
Rename channels
You can rename channels. The name appears
when you select the channel.
1. While you watch TV, press
FIND.
OPTIONS.
>
;\:
-^+
channels
1. Press
5. Press
to select each character,
then press OK.
16
EN
E ng li s h
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1. While you watch TV, press
FIND.
2. Press
OPTIONS.
EN
Downloaded from www.Manualslib.com manuals search engine
17
8 Settings
Access TV menus
Watch TV
Programme guide
Browse USB
Setup
Smart Picture
Smart Sound
Picture Format
18
to exit.
EN
1. Press
ADJUST.
Picture
Smart picture
Sound
Reset
EasyLink
Contrast
Preferences
Brightness
Factory settings
Colour
Reinstall TV
Sharpness
Noise reduction
Tint
1. Press
_;};@\ Adjust
brightness of the TV backlight to
match lighting conditions.
!{
;
:; Smooth
out transitions on digital pictures.
You can switch this feature on or
off.
\; Make
colours more vivid and improve the
details in bright colours.
{ Adjust the midtone
intensity in the picture. Black and
white are not affected.
: Adjust the picture when a
PC is connected to the TV via HDMI
or DVI.
;
Change the picture
format.
;
:@ Adjust the viewing
area. (when set to maximum, you may
see noise or the rough edge of an
image).
;
\ Adjust the picture
position for all picture formats except
for [Auto zoom] and [Wide screen].
EN
Downloaded from www.Manualslib.com manuals search engine
19
E ng li s h
: ;
Scale 4:3
format to 16:9.
ADJUST.
For selected
models. (Not for PC mode.)
Automatically display the
suitable picture format. If not,
widescreen is applied.
For selected
models. Adjust the
(subtitles remain visible).
Recommended for minimal
screen distortion but not for
HD or PC.
~ For selected
models. Enlarge the
Recommended for minimal
screen distortion but not for
HD or PC.
~ (Not for HD
and PC mode.) Remove the
black bars on the side of 4:3
broadcasts. There is minimal
distortion.
Q Show the classic 4:3
format.
!` :? (Not
for HD and PC mode.) Scale
4:3 format to 16:9.
20
EN
Smart Picture
Smart Sound
Picture Format
&;
settings.
1. Press
ADJUST.
Picture
Smart sound
Sound
Reset
Easyink
SmartClear
Preferences
Bass
Factory settings
Treble
Reinstall TV
Surround
Headphone volume
Auto volume levelling
1. Press
EN
Downloaded from www.Manualslib.com manuals search engine
21
E ng li s h
OPTIONS.
22
EN
or
3. Press
or
to enter a subpage.
OPTIONS.
easily.
FIND.
OPTIONS.
FIND.
OPTIONS.
Switch on EPG
1. Press
Note
All favourite channels are marked by an asterisk
when you view the channel grid.
FIND.
OPTIONS.
4. Press
2. Press
E ng li s h
OPTIONS.
23
;\}@
Search TV
programmes by genre.
;\ : :
:
List
programme reminders. Only available
for upcoming programmes.
;
{: Update the latest
programme guide information.
OPTIONS.
to exit.
Note
This option is only available if you select [Auto
clock] > [Automatic] (in countries with clock
transmission data).
1. Press
Note
4. Press OK to confirm.
If your selected country supports digital
broadcast, the clock displays the time data from
your TV service operator as priority.
24
EN
Note
This option is only available if you select [Auto
clock] > [Manual].
1. Press
Use timers
You can set timers to switch the TV to standby
Tip
Set the TV clock before you use timers.
Tip
If you forget your code, enter 8888 to override
any existing codes.
Tip
You can switch off your TV earlier or reset the
sleep timer during the countdown.
1. Press
25
E ng li s h
OPTIONS.
1. Press
to exit.
Change language
Depending on your broadcaster, you can change
the audio language, subtitle language, or both,
for a TV channel.
Multiple audio languages, subtitles, or both, are
broadcast through teletext or DVB-T digital
broadcasts. Dual sound broadcasts: With digital
broadcasts, you can select a subtitle language.
EN
OPTIONS.
-\|
@ : `;
-
version
1. Press
1. Press
EN
Downloaded from www.Manualslib.com manuals search engine
27
\ ;
: \
@\:@
broadcasts
You can check if there are updates available
through digital broadcasts.
1. Press
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1. While you watch TV, press
Change TV preferences
Use the preferences menu to customise your
TV settings.
1. Press
28
EN
View photos
1. In the USB browser, select [Picture], then
press OK.
2. Select a photo or a photo album, then
press OK to view the photo enlarged to fill
the TV screen.
To view the next or previous photo,
press
.
3. To return, press
Note
[Rotate image] and [Show info] appear only
when the slideshow is paused.
EN
Downloaded from www.Manualslib.com manuals search engine
29
E ng li s h
9 Multimedia
Listen to music
Caution
1. Press
to play.
to pause.
or to play the previous or next
track.
or
to search forward or
backward.
to stop.
30
EN
FIND.
31
E ng li s h
10 Pixel policy
Note
A red or blue bright dot must be more
32
EN
ACCEPTABLE LEVEL
221TE4L / 231TE4L
3
1
0
>15mm
3
ACCEPTABLE LEVEL
221TE4L / 231TE4L
5 or fewer
2 or fewer
0
>15mm
5 or fewer
ACCEPTABLE LEVEL
221TE4L / 231TE4L
5 or fewer
E ng li s h
Note
1 or 2 adjacent sub pixel defects = 1 dot defect
EN
Downloaded from www.Manualslib.com manuals search engine
33
11 Troubleshooting
This section describes commonly encountered
issues and suggested solutions.
TV channel issues
Previously installed channels do not appear in
\ ;\
EN
Picture issues
^\
}\
;
There is poor picture quality from connected
: `;
;
Note
If no audio signal is detected, the monitor
automatically switches the audio output off
this does not indicate malfunction.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this monitor at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this User Manual.
Warning
Do not attempt to repair the monitor yourself.
This may cause severe injury, irreparable
damage to your monitor or void your warranty.
Note
EN
Downloaded from www.Manualslib.com manuals search engine
35
E ng li s h
Sound issues
Version: M4221TEE1T
2012 Koninklijke Philips Electronics N.V. All rights reserved.
Koninklijke Philips Electronics N.V.
www.philips.com