Beruflich Dokumente
Kultur Dokumente
713dPXXX
Upgrade Guide
Version
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following
terms. If you do not agree to the following terms, please notice that you are not
allowed to use this document.
Copyright 2015 ZTE CORPORATION. Any rights not expressly granted herein are
reserved. This document contains proprietary information of ZTE CORPORATION. Any
reproduction, transfer, distribution, use or disclosure of this document or any portion of
this document, in any form by any means, without the prior written consent of ZTE
CORPORATION is prohibited.
and
are registered trademarks of ZTE CORPORATION. ZTEs company
name, logo and product names referenced herein are either trademarks or registered
trademarks of ZTE CORPORATION. Other product and company names mentioned
herein may be trademarks or trade names of their respective owners. Without the prior
written consent of ZTE CORPORATION or the third party owner thereof, anyones
access to this document should not be construed as granting, by implication, estopped
or otherwise, any license or right to use any marks appearing in the document.
The design of this product complies with requirements of environmental protection and
personal security. This product shall be stored, used or discarded in accordance with
product manual, relevant contract or laws and regulations in relevant country
(countries).
This document is provided as is and as available. Information contained in this
document is subject to continuous update without further notice due to improvement
and update of ZTE CORPORATIONs products and technologies.
ZTE CORPORATION
Addres
s:
Address: NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
Websit
e:
Email:
http://dms.zte.com.cn
TSM.Aftersales@zte.com.cn
1(7)
Revision History
Product Version
iBSC V6.20.713
Document Version
Serial Number
R1.0
Author
Date
Document Version
Prepared by
Reviewed by
Approved by
R1.0
2(7)
Description
2 Preparations
Preparations
TABLE OF CONTENT
1
1.1
1.2
1.3
1.4
1.5
2
2.1
2.2
2.3
2.13
2.13.1
2.13.2
2.14
Preparations.....................................................................................................5
Preparation for Serial Port Debugging Cable & Udpwatch Environment............5
Spare Boards.....................................................................................................5
Compatibility Between Motherboard and Sub-card of UPPB_060201 Boards (One
or Two Days in Advance)...................................................................................5
Master/Slave Boards Changeover Test (Night, One or Two Days in Advance)...7
Version Check (One or Two Days in Advance)...................................................7
iBSC Version Synchronization to OMCR............................................................7
Checking BSC Version Consistency..................................................................8
Checking Specific Version for BSC Board........................................................10
Check of OMP BOOT Parameters Configuration (One or Two Days in Advance)10
The Version Earlier Than iOMCRV6.20.614f Before the Upgrade....................10
The Version Not Earlier Than iOMCRV6.20.614f Before the Upgrade..............11
Creation of Upgrade Backup Directory (One or Two Days Before Upgrade)....13
Modification in zxg10.cfg Files (One or Two Days in Advance)........................14
Backup of ZDB Files (Before iOMCR Upgrade)...............................................16
Backing up ZDB File of OMCR........................................................................16
Backing up IBSC ZDB Files.............................................................................16
Export the networkplan Data(Before iOMCR Upgrade)....................................18
Export of Existing Alarm List (Before iOMCR Upgrade)...................................19
iBSC Operation State Check (Before iOMCR Upgrade)...................................19
Checking iBSC Operation State (For Versions Not Later Than iBSCV6.20.200f
Before the Upgrade)........................................................................................19
Checking iBSC Operation State (For Versions Later Than iBSCV6.20.200f
Before the Upgrade)........................................................................................21
Checking the State of IPA/IPGb/Sigtran/FLEXA/FLEXGb (For IPA/Gb, Sigtran,
FlexA/Gb)........................................................................................................22
Booting OMP from Flash (Before iOMCR Upgrade).........................................25
The Version Earlier Than iOMCRV6.20.614c Before the Upgrade...................25
The Version Not Earlier Than iOMCRV6.20.614c Before the Upgrade............26
Uploading CPU/DSP/FPGA/BOOT/MCU in New Version to OMCR.................27
3
3.1
3.2
2.4
2.5
2.5.1
2.5.2
2.5.3
2.6
2.6.1
2.6.2
2.7
2.8
2.9
2.9.1
2.9.2
2.10
2.11
2.12
2.12.1
2.12.2
2.12.3
4(7)
3.3
3.4
3.4.1
3.4.2
3.4.3
3.5
3.6
3.7
3.8
3.9
3.10
3.11
4
4.1
4.2
4.3
4.4
4.4.1
4.4.2
4.4.3
4.5
4.6
4.7
4.8
4.9
4.9.1
4.9.2
4.10
4.11
4.12
4.13
5
5.1
5.2
5.3
5.4
5.5
5.6
5.6.1
5.6.2
5.6.3
5.7
5.8
5.9
6
6.1
6.1.1
6.1.2
6.2
6.3
6.4
6.5
8
8.1
8.1.1
8.1.2
8.1.3
8.1.4
8.1.5
8.1.6
8.1.7
8.1.8
8.1.9
8.1.10
8.1.11
8.2
8.2.1
8.2.2
8.2.3
8.2.4
8.2.5
8.2.6
9
9.1
9.2
9.3
6(7)