Beruflich Dokumente
Kultur Dokumente
using Certificate
Cyberoam1
Cyberoam2
192.168.1.0/24
Local ID john@elitecore.com
Local certificate AHMD_cert
125.16.7.254
Local
Internal
Network
192.168.2.0/24
Local ID dean@elitecore.com
Local certificate DLH_cert
192.168.2.0/24
Remote ID dean@elitecore.com
under the Connection status indicates that the connection is successfully activated
Note
At a time only one connection can be active if both the types of connection - Digital Certificate and
Preshared Key - are created with the same source and destination. In such situation, at the time of
activation, you will receive error unable to activate connection hence you need to deactivate all other
connections.
under the Connection status indicates that the connection is successfully activated
Note
At a time only one connection can be active if both the types of connection - Digital Certificate and
Preshared Key - are created with the same source and destination. In such situation, at the time of
activation, you will receive error unable to activate connection hence you need to deactivate all other
connections.
Establish Connection
You can establish connection, once the both the servers are configured. You can establish connection
from either of the servers.
Go to VPN IPSec Connection Manage Connection and click
under the Connection status indicates that the connection is successfully established.
If you are not able to establish the connection, check VPN log from Telnet Console. Refer to VPN Logs
and Troubleshooting Guide for log explanation and error solution.
Cyberoam1
Cyberoam2
192.168.1.0/24
Local ID john@elitecore.com
Local certificate AHMD_cert
125.16.7.254
Local
Internal
Network
192.168.2.0/24
Local ID dean@elitecore.com
Local certificate DLH_cert
192.168.2.0/24
Remote ID dean@elitecore.com
under the Connection status indicates that the connection is successfully activated
Note
At a time only one connection can be active if both the types of connection - Digital Certificate and
Preshared Key - are created with the same source and destination. In such situation, at the time of
activation, you will receive error unable to activate connection hence you need to deactivate all other
connections.
under the Connection status indicates that the connection is successfully activated
Note
At a time only one connection can be active if both the types of connection - Digital Certificate and
Preshared Key - are created. In such situation, at the time of activation, you will receive error unable to
activate connection hence you need to deactivate all other connections.
Establish Connection
You can establish connection, once the both the servers are configured. You can establish connection
from either of the servers.
Go to VPN IPSec Connection Manage Connection and click
under the Connection status indicates that the connection is successfully established.
If you are not able to establish the connection, check VPN log from Telnet Console. Refer to VPN Logs
and Troubleshooting Guide for log explanation and error solution.