Beruflich Dokumente
Kultur Dokumente
Summary of Lessons
Basic Lesson 1
Basic Lesson 2
Basic Pattern Making
Technical Design Tools
Grading
Importing/Exporting Lesson
Marker Making
Support Lesson help.optitex.com, email support@optitex.com, contact local OptiTex
trainer after Training
Basic Lesson 1
Intro
1.
2.
3.
4.
to Windows
mouse buttons, Rightclick - options, Leftclick, Wheel, wheel click
Windows Explorer, files and folders, create folder, search file, copy ,move
basic windows minimize, maximize, close, task bar
Basic windows Copy/Paste
Introduction to PDS
1. Open File (Importing files, see later in lesson)
2. Save File
3. Save As
4. Open Backup
Working Environment
1. Menus
2. Toolbars - drag, dock, move, close, display hide, logic
3. Piece Bar - Select, view name, page up/down, reorder.
4. Piece List - use piece to show how work with internal windows (like grading), docking
, floating, click Ctrl to Undock, close open, view menu
5. Working area
6. Rulers
7. Delete and display
8. Zooming - mouse wheel , home, shift home, mouse wheel button
9. Status bar, sew line/cut line , tool info , piece protected/locked , working unit
Basic Lesson 2
Anatomy of piece - (Open Training Pattern.PDS)
1. Point type , grade curve
2. Pleat, mirror line, darts drill hole, notch , lines
3. internal vs external - main contour of piece, vs internal line (drawn outside)
4. seam/Cut - F5
5. Display attribute -F10 - contour and global , color
Selecting Pieces, Points, Internals, Darts, Buttons
1. pick select tool , using icon/END key, Right click, select tool
2. Snap - hover over element , colored Red
3. select piece
4. select element - selection point, internal line, dart , drill hole, circle,text
5. difference between select piece and select internals/points
6. select multiple point - using shift not drag (unless advanced user)
7. select multiple piece - using shift , bound box, piece bar
8. Move piece - with space bar only (no mouse drag)- and icon
9. move internal - Crtl+space , and icon
10. delete internal/point
11. locked piece
12. Save placement
Properties
1. General -Gouble click or enter
2. Piece Properties
3. Point Properties
4. Internal Line Properties
Grading
1. Creating Sizes - http://www.optitex.com/Help/en/index.php/PDS:Table_Of_Sizes
2. Grading a Piece - http://www.optitex.com/Help/en/index.php/Training:Basic_Grading
3. Copy/Paste http://www.optitex.com/Help/en/index.php/PDS:Copy_And_Paste_Grading
4. Grading Proportional http://www.optitex.com/Help/en/index.php/PDS:Grade_Proportional_Tool
5. Merge / Copy and Paste Grading
6. Grading Notches
7. Changing Base Size
8. Check Grading / Compare Length
Marker Making
1. Making a Marker http://www.optitex.com/Help/en/index.php/Marker:Getting_Started_with_OptiTex_M
arker#Getting_Started
2. Checking Marker Parameters
3. Checking Yield
Support
Go to Website: help.optitex.com
email: support@optitex.com
email: local optiTex support - receive email from Trainer