Beruflich Dokumente
Kultur Dokumente
Document ID:
Old Document ID:
Title:
Copyright Notice:
Update Date:
PUBLIC
201385
(formerly 102659)
On Solaris 10 the "cpumem-diagnosis" Module may not Load on
E6900 / E4900 / E25K / E20K Systems
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved
Wed Apr 04
00:00:00 MDT
2007
Home>Content>Sun Alert
Criteria
Categories>Availability
Previously Published As
102659
Product
Solaris 10 Operating System
Bug ID
6469394
SA Document Body
NZWY8ZJ Internal ID use only.
Impact
The "cpumem-diagnosis" module may fail to load on E6900 / E4900 / E25K / E20K with
Solaris 10 causing the FMA daemon (fmd(1M)) to run in a degraded mode.
Systems will function correctly but events normally automatically diagnosed by FMA
using this module will require manual diagnosis.
Contributing Factors
This issue occurs on the following releases:
SPARC Platform
Solaris 10 with patch 118833-09 (or later) and without patch 124999-01
Notes: This issue can occur on any release of Solaris but is more likely to occur on
systems with kernel patch 118833-09 or later which is the 4/06 U2 release.
And this issue can occur on any SPARC based platform but is much more likely on the
platforms listed above.
Symptoms
Error messages similar to the following occur during boot:
SUNW-MSG-ID: FMD-8000-2K, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Sat Sep 9 21:02:36 PDT 2006
PLATFORM: SUNW,Sun-Fire, CSN: -, HOSTNAME: xxxxxx
SOURCE: fmd-self-diagnosis, REV: 1.0
EVENT-ID: 8cd1cff2-8967-4569-ce1b-cc0a96592344
DESC: A Solaris Fault Manager component has experienced an error that
required the module to be disabled.
Refer to http://sun.com/msg/FMD-8000-2K for more information.
AUTO-RESPONSE: The module has been disabled. Events destined for the
module will be saved for manual diagnosis.
IMPACT: Automated diagnosis and response for subsequent events
associated
with this module will not occur.
Workaround
fmd(1M) can be restarted with the command "svcadm restart fmd". Run "fmadm config"
to make sure the cpumem-diagnosis module is active. Execute "fmadm repair
fmd:///module/cpumem-diagnosis" to clear errors.
Example output on running "fmadm config":
# fmadm config
MODULE
cpumem-diagnosis
Diagnosis
cpumem-retire
eft
fmd-self-diagnosis
io-retire
syslog-msgs
#
VERSION STATUS
1.5
active
DESCRIPTION
UltraSPARC-III/IV CPU/Memory
1.0
1.13
1.0
1.0
1.0
active
active
active
active
active
Resolution
This issue is addressed in the following releases:
SPARC Platform
Modification History
Date: 11-JAN-2007
Date: 31-JAN-2007
Attachments
This solution has no attachment