Beruflich Dokumente
Kultur Dokumente
1
Data Collection
Users Manual
Contents
Contents
1. General
179
ii
207
210
210
213
217
223
224
224
225
226
228
228
231
238
242
246
248
250
251
252
255
256
265
267
267
268
269
272
273
273
277
282
283
284
284
286
286
287
288
289
289
290
Contents
302
7. Predefined Events
316
345
iii
iv
347
347
348
349
349
350
351
351
351
351
351
352
352
352
353
354
356
356
356
356
357
357
357
359
359
359
359
360
360
361
361
363
363
363
364
364
365
365
366
367
367
367
Contents
Appendix A. Abbreviations
369
Index
377
vi
Chapter 1. General
1.
General
1.1.
This book catalogs all data presented in TEMS Investigation Data Collection
and Route Analysis as well as all preconfigured presentation windows
supplied in the two applications.
Information elements in Data Collection and Route Analysis are covered in
separate chapters. The IEs are mostly the same in both applications, but
certain IEs as well as a number of entire IE categories are found only in Data
Collection. A further reason for providing separate listings is the large number
of minor differences between the applications in matters of naming,
organization of arguments, and so on. These differences arise from the more
sophisticated structuring of IEs in Route Analysis.
Information Element Support in Connectable Equipment
Some elements are presentable only with a subset of the connectable
devices. See the tables in chapter 5, page 303.
1.2.
Conventions
For the sake of brevity the following conventions are used in this book:
2.
Information Element
Categories
Category
Contents
General
Elements reported by
positioning equipment, and the
Time element. (In Data
Collection, these elements are
found in technology-specific
categories.)
GSM
DC
Section
Ref.
RA
Section
Ref.
4.1
3.1
4.2
Category
WCDMA
Contents
DC
Section
Ref.
RA
Section
Ref.
3.2
4.3
LTE
3.3
Not
supported
TD-SCDMA
3.4
Not
supported
3.5
4.4
iDEN
3.6
Not
supported
WiMAX
3.7
Not
supported
Data
3.8
4.5
GSM Uplink
3.9
Not
supported
CDMA
3.
The tables below list all information elements that can be presented by TEMS
Investigation Data Collection. For ease of reference, each category on the
Info Element tab is still covered in one single, alphabetically ordered list.
(Certain deviations from strict alphabetical order occur in the application in
order to achieve more logical orderings and groupings.) However, since the
number and diversity of the information elements are great, a special column
with codes is used in some tables to distinguish important subgroups among
the elements.
3.1.
Meaning
g+
ga
Code
h+
Meaning
The element is richer if frequency hopping is used.
If frequency hopping is used, the element covers all channels in
the hopping list.
hs
hs+
hs
Code
Meaning
si
ss
Range/Unit
Arg
10 ... 100
GSM RxLev
units
1 ... 4
Description
Signal strength of adjacent
channel.
Argument:
1: Serving cell 2 (400 kHz)
2: Serving cell 1 (200 kHz)
3: Serving cell +1 (+200 kHz)
4: Serving cell +2 (+400 kHz)
Invalid if frequency hopping is
used.
Adjacent
RxLev (dBm)
120 ... 10
dBm
1 ... 4
IE Name
Range/Unit
Arg
Adjacent Scan
0, 2
Description
Use of C/A measurements in
phone. See DC UM section
16.2.4.4.
0: Not activated
2: Activated
Altitude (ft)
1312 ...
29028
ft
Altitude (m)
400 ...
8848
m
AMR Active
Set DL
Text
0 ... 3
AMR Active
Set UL
Text
0 ... 3
AMR C/I
5 ... 35
dB
AMR C/I Hi
Limit
5 ... 35
dB
AMR C/I Lo
Limit
5 ... 35
dB
IE Name
AMR Codec
Call DL (%)
Range/Unit
Arg
0 ... 100
%
0 ... 7
Description
Distribution of downlink AMR
codec usage for the current call.
Invalid if no call is ongoing.
Argument: Indicates the AMR
codec.
0: 12.2 kbit/s
1: 10.2 kbit/s
2: 7.95 kbit/s
3: 7.40 kbit/s
4: 6.70 kbit/s
5: 5.90 kbit/s
6: 5.15 kbit/s
7: 4.75 kbit/s
AMR Codec
Call UL (%)
0 ... 100
%
0 ... 7
AMR Codec
Cell DL (%)
0 ... 100
%
0 ... 7
AMR Codec
Cell UL (%)
0 ... 100
%
0 ... 7
AMR Codec DL
(%)
0 ... 100
%
0 ... 3
IE Name
Range/Unit
Arg
AMR Codec UL
(%)
0 ... 100
%
0 ... 3
Description
Current distribution of uplink
AMR codec usage across the
active set being used.
Argument: 0 gives the first
member of the active set, etc.,
the members being ordered as
in AMR Active Set UL.
AMR
Hysteresis
0 ... 15
1 ... 3
AMR
Threshold
0 ... 63
1 ... 3
ARFCN BCCH
GSM 450:
259 ... 293
GSM 850:
128 ... 251
P-GSM 900:
1 ... 124
E-GSM 900:
0 ... 124,
975 ... 1023
GSM 1800:
512 ... 885
GSM 1900:
512 ... 810
10
IE Name
ARFCN
Current
Range/Unit
Arg
Description
See ARFCN
BCCH
ARFCN TCH
See ARFCN
BCCH
Attach Time
(ms)
0 ... 60000
ms
Band Control
0, 2
0 ... 26
%
g
hs
BER/Timeslot
(%)
0 ... 26
%
0 ... 7
g
hs
BLER/Timeslot
(%)
0 ... 100
%
0 ... 7
g
hs
BSIC
Text
11
IE Name
Range/Unit
Arg
00 ... 77
(octal)
C Value
0 ... 63
GSM RxLev
units
C/A 3
BSIC (Num)
Description
C/A 2 ...
C/A +3
C/I elements:
General
remark
Sony Ericsson phones report C/I values for traffic channels. If the
BCCH is not used as traffic channel, the C/I Absolute element will
be invalid for the BCCH ARFCN.
Nokia phones report a single C/I value which is associated with
the BCCH in the presentation.
See also notes on individual elements below.
C/I Absolute
5 ... 35
dB
See
range of
ARFCN
BCCH
Carrier-over-interference ratio
for all channels.
Argument = ARFCN.
Concerning the range, see DC
UM chapter 33.
12
IE Name
C/I Best
Range/Unit
Arg
Description
5 ... 35
dB
0 ... 511
(8641)
g+
hs+
h+
C/I Best:
ARFCN
See ARFCN
BCCH
0 ... 511
(8641)
g+
hs+
h+
C/I Best:
Timeslot
0 ... 7
0 ... 511
(8641)
g
hs
h+
5 ... 35
dB
0 ... 7
g
hs
h+
13
IE Name
C/I Hopping
List
Range/Unit
Arg
Description
5 ... 35
dB
0 ... 63
g+
hs+
hc+
C/I Hopping
List: ARFCN
See ARFCN
BCCH
0 ... 63
h+
C/I On BCCH
Carrier
5 ... 35
dB
14
IE Name
C/I Worst
Range/Unit
Arg
Description
5 ... 35
dB
0 ... 511
(8641)
g+
hs+
h+
C/I Worst:
ARFCN
See ARFCN
BCCH
0 ... 511
(8641)
g+
hs+
h+
C/I Worst:
Timeslot
0 ... 7
0 ... 511
(8641)
g
hs
h+
C1
C2
15
IE Name
C31
Range/Unit
Arg
Description
C32
Cell EGPRS
Support
Text:
Yes/No
Cell GPRS
Support
Text:
Yes/No
Cell Id
0 ... 65535
Cell Identity.
Text:
0000 ...
FFFF
Text
Cell Id (Hex)
Cell Name
16
IE Name
Cell Name
Algorithm
Range/Unit
Arg
Description
1 ... 3
CGI
Text
CGI (Hex)
Text
Channel Mode
Text
Channel RxLev
10 ... 100
GSM RxLev
units
See
range of
ARFCN
BCCH
Channel RxLev
(dBm)
120 ... 10
dBm
See
range of
ARFCN
BCCH
17
IE Name
Range/Unit
Arg
Description
Channel Type
Text
g+
hs+
Ciphering
Algorithm
Text
Coding
Scheme DL
Text
Coding
Scheme DL
Usage (Own
Data) (%)
0 ... 100
%
Coding
Scheme DL
Usage (Total)
(%)
0 ... 100
%
Coding
Scheme UL
18
1 ... 4
1 ... 4
Text
IE Name
CS-n DL
Usage (Own
Data) (%),
n = 1 ... 4
Range/Unit
Arg
Description
0 ... 100
%
0 ... 7
Current CS DL
1 ... 4
Current CS UL
1 ... 4
Current MCS
DL
1 ... 9
Current MCS
UL
1 ... 9
Data Mode
Text
Data Mode
(Num)
1 ... 3
Disable
Handover
0, 2
Downlink
Signalling
Counter
Current
0 ... 45
19
IE Name
Range/Unit
Arg
Downlink
Signalling
Counter Max
0 ... 45
DTX Rate DL
0 ... 100
%
Description
Initial value of Downlink
Signalling Counter (DSC).
Valid only in idle mode.
100
0 ... 31
See
Description
EGPRS BEP
(Variance)
0 ... 7
See
Description
EGPRS BEP
Total (Mean)
0 ... 31
See
Description
EGPRS BEP
Total (Variance)
0 ... 7
See
Description
20
IE Name
Range/Unit
Arg
EGPRS Link
Quality Control
UL
Text
EGPRS
Window Size
DL
64 ... 1024
RLC blocks
EGPRS
Window Size
UL
64 ... 1024
RLC blocks
0 ... 100
%
g
hs
Description
0 ... 100
%
100
0 ... 100
%
Firmware
Version
Text
Forced GPRS
Class
0, 2
21
IE Name
Range/Unit
Arg
Forced
Multislot Class
0, 2
Description
Use of GPRS multislot class
forcing function in phone.
0: Not activated
2: Activated
Not supported by any currently
connectable phones; see
section 5.2 for details.
Forced Power
Class
0, 2
Forced Quality
Of Service
0, 2
Frequency
Band
Frequency
Band (Num)
Frequency
Band For TCH
Text
Text
Frequent AQM
IEs: General
remark
Frequent AQM
Score DL
1 ... 5
MOS-PESQ
22
IE Name
Range/Unit
Arg
Frequent AQM
Score UL
1 ... 5
MOS-PESQ
Frequent AQM
Sentence DL
0 ... 7
Frequent AQM
Sentence UL
0 ... 7
GA-RC/GACSR State
1 ... 4
ga
Description
GA-RC/GACSR State
(Text)
Text
ga
GAN Access
Point MAC
Address
Text
ga
GAN Access
Point SSID
Text
ga
GAN GERAN
Cell Id
0 ... 65535
ga
GAN GERAN
LAC
0 ... 65535
ga
GAN GERAN
MCC
ga
23
IE Name
GAN GERAN
MNC
GAN GSM
Coverage
Indicator
Range/Unit
Arg
Description
ga
0 ... 3
ga
GAN GSM
Coverage
Indicator (Text)
Text
ga
GAN Redirect
Counter
0 ... 255
ga
GAN WLAN
Quality Level
0 ... 5
ga
GAN WLAN
Quality Level
(Text)
Text
ga
GAN WLAN
RSSI
254 ... 0
dBm
ga
Text
ga
GANC IP
Address
24
IE Name
Range/Unit
Arg
GANC SEGW
IP Address
Text
ga
GMM State
Text
GRR State
Text
Hardware
Text
Device model.
Hardware ID
Text
Device IMEI.
0 ... 360
degrees
Hopping
Text
Hopping List
Text
0 ... 63
0, 2
Heading (deg)
HSN
Idle Channel
Quality
Description
Ignore Cell
Barred
0, 2
25
IE Name
Range/Unit
Arg
Interference
Measured
ARFCN
See ARFCN
BCCH
si
Description
The ARFCN scanned for
interferers during interference
scanning. Useful when
replaying a logfile.
(Interference scanning is no
longer supported by any
connectable phones.)
Interference
BCCH ARFCN
See ARFCN
BCCH
si
LAC
0 ... 65535
Text:
0000 ...
FFFF
90 ... 90
degrees
Text
Longitude
Longitude recorded by
positioning equipment.
Longitude
(Text)
Text
LLC BLER DL
(%)
0 ... 100
%
LLC BLER UL
(%)
0 ... 100
%
LAC (Hex)
Latitude
Latitude (Text)
26
IE Name
Range/Unit
Arg
Description
LLC Bytes
Received DL
0 ... 2 109
bytes
0 ... 2 109
bytes
LLC
Throughput DL
(kbit/s)
0 ... 400
kbit/s
LLC
Throughput UL
(kbit/s)
0 ... 400
kbit/s
LLC Window
Size DL
1 ... 255
LLC blocks
LLC Window
Size UL
1 ... 255
LLC blocks
0 ... 3
MAC Mode DL
MAC Mode DL
(Text)
Text
MAC Mode UL
0 ... 3
MAC Mode UL
(Text)
Text
27
IE Name
Range/Unit
Arg
Description
MAIO
0 ... 63
MCC
0 ... 100
%
0 ... 7
MCS-n DL
Usage (Own
Data) (%),
n = 1 ... 9
Message Hex
Dump Payload
Text
MNC
Mode
Text
1 ... 7
1: No service
2: Idle mode
3: Dedicated mode
4: Limited service mode
5: Scan mode
6: Packet mode
7: Packet Idle mode
Modulation DL
Text
Type of modulation on
downlink.
Modulation UL
Text
Mode (Num)
28
IE Name
Range/Unit
Arg
MS Behavior
Modified
Text: B,
C, G, or
a
combination
of these
letters (or
empty
string)
Description
Indicates whether the phones
behavior has been changed
from the default. Most of what
follows is applicable only to
Sony Ericsson GSM phones.
Empty string: No modification of
phone behavior
B: Modification of behavior not
related to channel selection (the
information elements Adjacent
Scan, Band Control, Forced
Power Class, Idle Channel
Quality)
C: Modification of channel
selection behavior (the
information elements Disable
Handover, Ignore Cell Barred,
Prevent Handover List Active,
Prevent Serving Cell List,
Serving Cell List Active, Target
Handover)
G: Modification of GPRS
behavior (the information
elements Forced GPRS Class,
Forced Multislot Class, Forced
Quality Of Service).
Any combination of these
letters may appear.
MS Power
Control Level
0 ... 31
See
Description
29
IE Name
MS Tx Power
(dBm)
Range/Unit
Arg
Description
GSM 850:
5 ... 39
GSM 900:
5 ... 39
GSM 1800:
0 ... 36
GSM 1900:
0 ... 33
dBm
Multiband
Reporting
0, 2
Neighbor IEs:
General
remark
A number of elements have been left out of the table. These are
the Neighbor ... Band and SS ... elements, which are mere
variants of the ordinary Neighbor elements and are used in the
status window Serving + Neighbors By Band (see section 8.1.3).
What differs is the sorting order: first by band and then, within
each band, by signal strength.
Neighbor
ARFCN
See ARFCN
BCCH
1 ... 32
Neighbor
ARFCN
(Sorted)
Neighbor BSIC
See ARFCN
BCCH
1 ... 32
Text
1 ... 32
30
IE Name
Range/Unit
Arg
Neighbor BSIC
(Num)
00 ... 77
(octal)
1 ... 32
Description
Base Station Identity Codes for
neighbor cells (in numeric
format), sorted by ARFCN.
Argument: 1 represents the
lowest ARFCN, etc.
Neighbor BSIC
(Sorted)
Text
1 ... 32
Neighbor BSIC
(Num) (Sorted)
00 ... 77
(octal)
1 ... 32
Neighbor C1
1 ... 32
Neighbor C1
(Sorted)
1 ... 32
Neighbor C2
1 ... 32
Neighbor C2
(Sorted)
1 ... 32
31
IE Name
Neighbor C31
Range/Unit
Arg
Description
1 ... 32
Neighbor C31
(Sorted)
1 ... 32
Neighbor C32
1 ... 32
Neighbor C32
(Sorted)
1 ... 32
Neighbor Cell
Id
0 ... 65535
1 ... 32
Neighbor Cell
Id (Sorted)
0 ... 65535
1 ... 32
Neighbor Cell
Id (Hex)
Text:
0000 ...
FFFF
1 ... 32
32
IE Name
Neighbor Cell
Id (Hex)
(Sorted)
Range/Unit
Arg
Text:
0000 ...
FFFF
1 ... 32
Description
Cell identities of neighbor cells,
sorted by signal strength.
Hexadecimal format.
Argument: 1 represents the
strongest neighbor, etc.
Neighbor Cell
Name
Text
1 ... 32
Neighbor Cell
Name (Sorted)
Text
1 ... 32
33
IE Name
Neighbor Cell
Name
Algorithm
Range/Unit
Arg
Description
1 ... 6
1 ... 32
34
IE Name
Range/Unit
Arg
Neighbor Cell
Name
Algorithm
(Sorted)
1 ... 6
1 ... 32
Neighbor LAC
0 ... 65535
Description
Same as Neighbor Cell Name
Algorithm but sorted by signal
strength.
Argument: 1 represents the
strongest neighbor, etc.
1 ... 32
Neighbor LAC
(Sorted)
0 ... 65535
1 ... 32
Neighbor LAC
(Hex)
Text:
0000 ...
FFFF
1 ... 32
Neighbor LAC
(Hex) (Sorted)
Text:
0000 ...
FFFF
1 ... 32
Neighbor
RxLev
Neighbor
RxLev (Sorted)
10 ... 100
GSM RxLev
units
1 ... 32
10 ... 100
GSM RxLev
units
1 ... 32
35
IE Name
Range/Unit
Arg
Neighbor
RxLev (dBm)
120 ... 10
dBm
1 ... 32
Neighbor
RxLev (dBm)
(Sorted)
120 ... 10
dBm
1 ... 32
Neighbor (SI)
ARFCN
Text
Description
Network
Control Order
Text
Network Mode
Of Operation
Text
Number Of
Hopping
Frequencies
36
0 ... 64
Number of frequencies in
hopping list.
IE Name
Range/Unit
Arg
Number Of
Used Timeslots
DL
0 ... 8
g
hs
Number Of
Used Timeslots
UL
0 ... 8
g
hs
PBCCH
Timeslot
0 ... 7
PDCH IEs:
General
remark
Description
PDCH
Utilization
Control DL (%)
0 ... 100
%
0 ... 7
PDCH
Utilization
Control UL (%)
0 ... 100
%
0 ... 7
PDCH
Utilization
Other Data DL
(%)
0 ... 100
%
0 ... 7
PDCH
Utilization Own
Data DL (%)
0 ... 100
%
0 ... 7
PDCH
Utilization Own
Data UL (%)
0 ... 100
%
0 ... 7
PDCH
Utilization Free
Data UL (%)
0 ... 100
%
0 ... 7
PDP IEs:
General
remark
37
IE Name
Range/Unit
Arg
Description
PDP Access
Point Name
Text
1 ... 11
PDP Address
Text
1 ... 11
PDP Context
Time (ms)
0 ... 60000
ms
PDP Contexts
Active
0 ... 11
Text
1 ... 11
3 ... 11
1 ... 11
PDP Mean
Throughput
Text
1 ... 11
PDP NSAPI
5 ... 15
1 ... 11
PDP Peak
Throughput
Text
1 ... 11
PDP
Precedence
Class
Text
1 ... 11
PDP Radio
Priority
Text
1 ... 11
PDP Reliability
Class
Text
1 ... 11
PDP Delay
Class
PDP LLC SAPI
PESQ IEs:
General
remark
PESQ Echo
Attenuation
38
IE Name
Range/Unit
Arg
Description
PESQ Echo
Correlation
0 ... 5
PESQ Echo
Delay
0 ... 1000
ms
PESQ Echo
Power
0 ... 100
dB
PESQ Score
DL
1 ... 5
MOS-PESQ
PESQ Score
UL
1 ... 5
MOS-PESQ
PESQ
Sentence DL
0 ... 3
PESQ
Sentence UL
0 ... 3
PESQ Volume
100 ... 20
dB
Preferred GAN
Mode
0, 2
ga
39
IE Name
Prevent
Handover List
Active
Range/Unit
Arg
0, 2
Description
Use of prevent handover
function in phone (handover to
certain cells prevented in
dedicated mode). See DC UM
section 16.2.4.8.
0: Not activated
2: Activated
Prevent
Serving Cell
List
0, 2
Q Search
Power
Text
0 ... 255
RAC (Hex)
Text: 00 ...
FF
Radio Link
Timeout
Current
0 ... 64
RAC
Radio Link
Timeout Max
4, 8, ..., 64
40
IE Name
Range/Unit
Arg
Description
RLA_P
10 ... 100
GSM RxLev
units
RLA_P (dBm)
120 ... 10
dBm
RLC BLER DL
(%)
0 ... 100
%
RLC BLER UL
(%)
0 ... 100
%
RLC Block
BSN elements
0 ... 127
0 ... 23
RLC Block
Dump
elements
Text
0 ... 23
41
IE Name
Range/Unit
Arg
Description
0 ... 31
0 ... 23
RLC Block
Type elements
Text
0 ... 23
RLC Bytes
Received DL
0 ... 2 109
bytes
RLC Bytes
Sent UL
0 ... 2 109
bytes
0 ... 400
kbit/s
RLC
Throughput DL
(kbit/s)
42
IE Name
Range/Unit
Arg
Description
RLC
Throughput DL
(%)
0 ... 100
%
RLC
Throughput UL
(kbit/s)
0 ... 400
kbit/s
RLC
Throughput UL
(%)
0 ... 100
%
RLP BLER DL
(%)
0 ... 100
%
hs
RLP BLER UL
(%)
0 ... 100
%
hs
RLP Bytes
Received DL
0 ... 2 109
bytes
hs
RLP Bytes
Sent UL
0 ... 2 109
bytes
hs
RLP
Throughput DL
(kbit/s)
0 ... 60
kbit/s
hs
RLP
Throughput DL
(%)
0 ... 100
%
hs
43
IE Name
Range/Unit
Arg
Description
RLP
Throughput UL
(kbit/s)
0 ... 60
kbit/s
hs
RLP
Throughput UL
(%)
0 ... 100
%
hs
RxLev Full
10 ... 100
GSM RxLev
units
RxLev Full
(dBm)
120 ... 10
dBm
RxLev Full In
Service
10 ... 100
GSM RxLev
units
RxLev Full In
Service (dBm)
120 ... 10
dBm
RxLev Sub
10 ... 100
GSM RxLev
units
RxLev Sub
(dBm)
120 ... 10
dBm
44
IE Name
Range/Unit
Arg
RxLev Sub In
Service
10 ... 100
GSM RxLev
units
RxLev Sub In
Service (dBm)
120 ... 10
dBm
0 ... 7
RxQual Full
See
Description
Description
RxQual Full
(%)
0 ... 26
%
RxQual Sub
0 ... 7
See
Description
RxQual Sub
(%)
0 ... 26
%
Scanned
Adjacent
ARFCN 2
See ARFCN
BCCH
0 ... 63
Scanned
Adjacent
ARFCN 1
See ARFCN
BCCH
h+
0 ... 63
h+
45
IE Name
Scanned
Adjacent
ARFCN C0
Range/Unit
Arg
Description
See ARFCN
BCCH
0 ... 63
h+
Scanned
Adjacent
ARFCN +1
See ARFCN
BCCH
0 ... 63
h+
Scanned
Adjacent
ARFCN +2
See ARFCN
BCCH
0 ... 63
h+
Scanned
Adjacent
RxLev 2
(dBm)
120 ... 10
dBm
0 ... 63
h+
Scanned
Adjacent
RxLev 1
(dBm)
120 ... 10
dBm
0 ... 63
h+
Scanned
Adjacent
RxLev C0
(dBm)
120 ... 10
dBm
0 ... 63
h+
46
IE Name
Range/Unit
Arg
Description
Scanned
Adjacent
RxLev +1
(dBm)
120 ... 10
dBm
0 ... 63
h+
Scanned
Adjacent
RxLev +2
(dBm)
120 ... 10
dBm
0 ... 63
h+
Scanned
ARFCN
See ARFCN
BCCH
0 ... 846
Scanned Band
0 ... 846
Scanned BSIC
00 ... 77
(octal)
0 ... 846
00 ... 77
(octal)
See
range of
ARFCN
BCCH
Scanned
C/A 2 (dB)
0 ... 63
h+
Scanned
C/A 1 (dB)
0 ... 63
h+
Scanned
C/A +1 (dB)
0 ... 63
h+
Scanned BSIC
On ARFCN
47
IE Name
Range/Unit
Arg
Scanned
C/A +2 (dB)
0 ... 63
h+
Scanned C/I
5 ... 35
dB
0 ... 846
Description
C/A measurement: C/A values
corresponding to Scanned
Adjacent RxLev +2 (dBm).
C/I values for scanned
channels.
Argument: 0 gives the cell
name for the channel with the
lowest frequency, etc. (not
ARFCN).
Scanned Cell
Name
Text
0 ... 846
c
s
0 ... 847
10 ... 100
GSM RxLev
units
0 ... 846
Scanned
RxLev (dBm)
120 ... 10
dBm
0 ... 846
Scanned
RxLev On
ARFCN
10 ... 100
GSM RxLev
units
See
range of
ARFCN
BCCH
Scanned
RxLev On
ARFCN (dBm)
120 ... 10
dBm
See
range of
ARFCN
BCCH
Scanned
Channels No
Of
Scanned
RxLev
48
Argument: ARFCN.
Same as Scanned RxLev On
ARFCN but in dBm.
IE Name
Serving Cell
List Active
Range/Unit
Arg
0, 1, 2
Description
Use of lock on channel
function in phone. See DC UM
sections 16.2.4.6, 16.3.2.1,
16.4.1.2, 16.4.2.1.
0: Not activated
1: Ordered by user, but not yet
activated
2: Activated
Signal Strength
Hopping List
120 ... 10
dBm
0 ... 63
h+
49
IE Name
Range/Unit
Arg
Signal Strength
On BCCH
Carrier
120 ... 10
dBm
Description
Signal strength on the current
BCCH. Especially useful for
obtaining a correct measure of
the cell size when frequency
hopping is used and power
control is applied to the TCHs.
The following steps are used to
find a value for the element:
1. Neighbor list. If the BCCH
frequency is in the neighbor
list, report its signal strength.
2. Hopping list. If the BCCH is
used as hopping frequency
(in dedicated mode), report
its signal strength.
3. Idle mode. If the phone is in
idle mode, report RxLev
(dBm).
If frequency hopping is not
used, step 2 becomes If BCCH
= TCH ....
Invalid if no value is found in
any of the above steps.
SNDCP BLER
DL (%)
0 ... 100
%
SNDCP BLER
UL (%)
0 ... 100
%
SNDCP Bytes
Received DL
0 ... 2 109
bytes
SNDCP Bytes
Sent UL
0 ... 2 109
bytes
50
IE Name
Range/Unit
Arg
Description
SNDCP
Throughput DL
(kbit/s)
0 ... 400
kbit/s
SNDCP
Throughput UL
(kbit/s)
0 ... 400
kbit/s
Spectr Ana Sc
DL Freq
1 ...
2560
ss
Spectr Ana Sc
DL No of Freq
0 ... 2560
ss
Spectr Ana Sc
DL RSSI (dBm)
130 ... 20
dBm
1 ...
2560
ss
Speech Codec
Text
0 ... 800
ms
Speech Path
Delay
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 155
mph
Speed in mph.
51
IE Name
SQI
Range/Unit
Arg
Description
20 ... 30
dBQ
SQI MOS
1 ... 5
MOS
Strongest
Scanned
ARFCN
See ARFCN
BCCH
0 ... 846
52
IE Name
Range/Unit
Arg
Description
Strongest
Scanned Band
0 ... 846
Strongest
Scanned BSIC
Text
0 ... 846
Strongest
Scanned C/I
5 ... 35
dB
0 ... 846
Strongest
Scanned Cell
Name
Text
0 ... 846
c
s
Strongest
Scanned
RxLev (dBm)
120 ... 10
dBm
Sub Channel
Number
0 ... 7
TA
0 ... 63
See
Description
0 ... 846
53
IE Name
Target
Handover
Range/Unit
Arg
0, 1, 2
Description
Use of lock handover function in
phone (handover restricted to a
chosen set of cells; see DC UM
section 16.2.4.8).
0: Not activated
1: Ordered by user, but not yet
activated
2: Activated
TD-SCDMA
Neighbor Cell
Parameter ID
0 ... 127
1 ... 32
1 ... 32
TD-SCDMA
Neighbor
RSCP
116 ... 25
dBm
1 ... 32
TD-SCDMA
Neighbor
UARFCN
0 ... 16383
1 ... 32
TD-SCDMA
Neighbor No Of
Number of TD-SCDMA
neighbors measured in GSM
mode.
(frequency
band
dependent)
TFI DL
0 ... 31
TFI UL
0 ... 31
Text
Time
54
IE Name
Timeslot IEs:
General
remark
Timeslot
Range/Unit
Arg
Description
Timeslot
Channel Type
DL
Text
0 ... 7
g
hs
Timeslot
Channel Type
UL
Text
0 ... 7
g
hs
Timeslot Used
DL
Text
0 ... 7
g
hs
Timeslot Used
UL
Text
0 ... 7
g
hs
0 ... 232 1
TLLI (Hex)
Text
Training
Sequence
Code
0 ... 7
Uplink State
Flag
0 ... 7
0 ... 7
TLLI
WCDMA
Neighbor
CPICH Ec/No
(dB)
34 ... 0
dB
1 ... 32
55
IE Name
Range/Unit
Arg
WCDMA
Neighbor
CPICH RSCP
(dBm)
140 ... 15
dBm
1 ... 32
WCDMA
Neighbor SC
0 ... 511
Description
CPICH RSCP of measured
WCDMA neighbors.
Argument: See WCDMA
Neighbor CPICH Ec/No.
1 ... 32
WCDMA
Neighbor
UARFCN
WCDMA
Neighbors No
Of
Weakest
Scanned
ARFCN
0 ... 16383
1 ... 32
(frequency
band
dependent)
0 ... 32
See ARFCN
BCCH
0 ... 846
Weakest
Scanned Band
0 ... 846
56
IE Name
Range/Unit
Arg
Weakest
Scanned BSIC
Text
0 ... 846
Description
BSIC of scanned channels
sorted by increasing signal
strength.
Argument: See Weakest
Scanned ARFCN.
Weakest
Scanned C/I
5 ... 35
dB
0 ... 846
Weakest
Scanned Cell
Name
Text
0 ... 846
c
s
Weakest
Scanned
RxLev (dBm)
120 ... 10
dBm
0 ... 846
57
3.2.
Meaning
dv
ne
ns
pi
rs
ss
ts
58
Es: Scrambling code energy per chip (as measured by a scanning device
during the SCH timeslot scan).
RSCP: Received signal code power, identical with Ec: see 3GPP 25.215,
section 5.1.5.
RSSI: Received signal strength indicator, identical with No: see 3GPP
25.215, section 5.1.5.
that is,
59
Range/Unit
Arg
Altitude (ft)
1312 ...
29028
ft
Altitude (m)
400 ...
8848
m
AMR Codec
IEs: General
remark
AMR Codec
Name
Description
These elements are valid also in GSM mode, where they appear
side by side with the more elaborate GSM-specific elements
relating to AMR (see section 3.1).
Text
1 ... 8
AMR Codec
Usage (DL)
0 ... 100
%
1 ... 8
AMR Codec
Usage (UL)
0 ... 100
%
1 ... 8
AS Cell Name
Text
1 ... 6
60
IE Name
AS CPICH
Ec/No
Range/Unit
Arg
34 ... 0
dB
1 ... 6
Description
CPICH Ec/No of each active set
member.
Argument: Active set ID.
AS CPICH
RSCP
140 ... 15
dBm
1 ... 6
AS No Of
Members
AS SC
0 ... 6
0 ... 511
1 ... 6
AS UARFCN
DL
Averaged BER
(%)
0 ... 16383
1 ... 6
(frequency
band
dependent)
0 ... 100
%
BLER Target
Control
0 ... 63
BLER Target
Control (Text)
Text
61
IE Name
Range/Unit
Arg
Call Event
Success Rate
0 ... 100
%
Description
Calculated as:
# ends /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Only events occurring in
WCDMA mode are counted.
Cell Barred
Control
0, 1
Cell Barred
Control (Text)
Text
Compressed
Mode
0, 1
0 ... 255
rs
CW Sc RSSI
130 ... 20
dBm
1 ... 255
rs
CW Sc
UARFCN
62
0 ... 16383
(frequency
band
dependent)
1 ... 255
rs
IE Name
Range/Unit
Arg
Text
1 ... 6
Description
Cell name of each detected
neighbor.
Argument: Neighbor identity.
Det Neigh
CPICH Ec/No
34 ... 0
dB
1 ... 6
Det Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Det Neigh
CPICH Tx
Power
Det Neigh No
Of Members
Det Neigh
Pathloss
31 ... 50
dBm
1 ... 6
0 ... 6
30 ... 165
dB
1 ... 6
Det Neigh SC
0 ... 511
1 ... 6
Det Neigh
UARFCN DL
0 ... 16383
1 ... 6
(frequency
band
dependent)
DPCCH ISCP
DL
135 ... 15
dBm
DPCCH Power
UL
50 ... 33
dBm
63
IE Name
Range/Unit
Arg
Description
DPCCH RSCP
DL
135 ... 15
dBm
DTX Rate DL
0 ... 100
%
DVB-H BER
0 ... 100
%
dv
DVB-H C/N
5 ... 35
dB
dv
DVB-H MFER
0 ... 100
%
dv
DVB-H Rx
Power
128 ... 20
dBm
dv
Finger IEs:
General
remarks
The Rake fingers are not sorted by signal strength; they come in
the order they are reported.
The ordinal (1st, etc.) refers to a UMTS frequency. Separate sets
of Finger elements are provided for the full number of UMTS
frequencies that can be scanned simultaneously.
The Motorola E1000 may report finger measurements on a
number of different channels (see the elements Finger ... Position
Type); the other devices that support finger measurements always
report them on the CPICH.
The Finger and Finger Position series of elements contain the
same data. The latter series consists of arrays of size 2560
corresponding to the sequence of chips in a radio frame timeslot,
with the received finger information positioned at the correct
indices. These elements are provided for bar chart plotting. The
Finger Slot Pos element is of course not needed in the Finger
Position series and is consequently absent from it.
Finger ...
Ec/No
34 ... 0
dB
1 ... 48
Finger ... No
Of
0 ... 48
64
IE Name
Range/Unit
Arg
Finger ...
RSCP
140 ... 15
dBm
1 ... 48
130 ... 20
dBm
1 ... 48
0 ... 511
1 ... 48
Finger ... SC
Description
RSCP for each Rake finger.
Argument: Rake finger number.
RSSI for each Rake finger.
Argument: Rake finger number.
Scrambling code for each Rake
finger.
Argument: Rake finger number.
0 ... 15
1 ... 48
1 ... 2560
1 ... 48
Text
1 ... 48
Finger ...
UARFCN
Finger ...
Position Ec/No
0 ... 16383
1 ... 48
(frequency
band
dependent)
34 ... 0
dB
1 ...
2560
Finger ...
Position RSCP
140 ... 15
dBm
1 ...
2560
Finger ...
Position RSSI
130 ... 20
dBm
1 ...
2560
65
IE Name
Finger ...
Position SC
Range/Unit
Arg
0 ... 511
1 ...
2560
Description
Same as Finger ... SC (see
general remarks).
Argument: Chip index.
Finger ...
Position Slot
0 ... 15
1 ...
2560
Finger ...
Position Type
Text
1 ...
2560
Finger ...
Position
UARFCN
Firmware
Version
0 ... 16383
(frequency
band
dependent)
Text
1 ...
2560
Frequent AQM
elements
GSM Neigh
ARFCN
See section
3.1 under
ARFCN
BCCH
1 ... 32
Text
1 ... 32
GSM Neigh
BSIC
ne
ne
GSM Neigh No
Of
GSM Neigh
RxLev
0 ... 32
ne
120 ... 10
dBm
1 ... 32
ne
66
IE Name
Range/Unit
Arg
Text
Heading (deg)
0 ... 360
degrees
HO Event Type
0 ... 6
Hardware
Description
Device model.
HO Event Type
(Text)
HS IEs:
General
remark
Text
HS 16-QAM
Modulation
Rate
0 ... 100
%
HS 64-QAM
Modulation
Rate
0 ... 100
%
HS CQI (Max)
0 ... 30
See
Description
0 ... 30
67
IE Name
HS CQI (Min)
Range/Unit
Arg
0 ... 30
Description
The minimum CQI value during
the latest reporting period.
Compare HS CQI (Max).
HS CQI
Feedback
Cycle
0 ... 255
ms * 2
HS CQI
Repetition
Factor
0 ... 15
HS-DSCH
ACK Rate
0 ... 100
%
HS-DSCH
BLER 1st
0 ... 100
%
HS-DSCH
BLER
Residual
0 ... 100
%
HS-DSCH
BLER
Residual Per
Process
0 ... 100
%
0 ... 16
HS-DSCH
DTX Rate
0 ... 100
%
HS-DSCH
Error Blocks
1st No Of
0 ... 100
68
IE Name
Range/Unit
Arg
HS-DSCH
Error Blocks
Residual No Of
0 ... 100
HS-DSCH
Error Blocks
Residual No Of
Per Process
0 ... 100
0 ... 16
Description
Number of residual block errors
on the HS-DSCH (decoding
unsuccessful after maximum
number of retransmissions).
Same as HS-DSCH Error
Blocks Residual No Of but for
each active HARQ process
separately.
Argument: HARQ process
index.
HS-DSCH
HARQ
Processes No
Of
0 ... 16
HS-DSCH
NACK Rate
0 ... 100
%
HS-DSCH
New
Transmission
Rate Per
Process
0 ... 100
%
0 ... 16
HS-DSCH
Post Rate
0 ... 100
%
HS-DSCH Pre
Rate
0 ... 100
%
HS-DSCH
Retransmission Rate
0 ... 100
%
69
IE Name
Range/Unit
Arg
HS-DSCH
Retransmission Rate
Per Process
0 ... 100
%
0 ... 16
HS-DSCH
Retransmissions
0 ... 100
HS-DSCH
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS H-RNTI
0 ... 65535
Description
0 ... 127
1 ... 32
HS MAC
Queue ID DL
HS MIMO
IEs: General
remark
70
0 ... 100
%
1 ... 2
IE Name
Range/Unit
Arg
HS MIMO 64QAM
Modulation
Rate
0 ... 100
%
1 ... 2
HS MIMO CQI
(Max)
0 ... 30
1 ... 2
See
Description
Description
0 ... 30
1 ... 2
HS MIMO CQI
(Min)
0 ... 30
1 ... 2
HS MIMO
DSCH ACK
Rate
0 ... 100
%
1 ... 2
HS MIMO
DSCH BLER
0 ... 100
%
1 ... 2
HS MIMO
DSCH BLER
Residual
0 ... 100
%
1 ... 2
HS MIMO
DSCH Error
Block 1st No
Of
0 ... 100
%
1 ... 2
HS MIMO
DSCH Error
Block Residual
No Of
0 ... 100
%
1 ... 2
71
IE Name
Range/Unit
Arg
Description
HS MIMO
DSCH NACK
Rate
0 ... 100
%
1 ... 2
HS MIMO Multi
TB Rate
0 ... 100
%
1 ... 2
Argument = 1: Percentage of
TTIs with one transport block
used.
Argument = 2: Percentage of
TTIs with two transport blocks
used.
HS MIMO Phy
Scheduled
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS MIMO Phy
Served
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS MIMO
QPSK
Modulation
Rate
72
1 ... 2
1 ... 2
0 ... 100
%
1 ... 2
IE Name
HS MIMO
Transport
Block Count
Primary (Abs)
Range/Unit
Arg
0 ... 65535
1 ...
42192
Description
Block counts for all possible
HSPA transport block sizes in
the primary MIMO stream,
accumulated over the current
session.
Argument: The transport block
size itself in bits (not an index).
HS MIMO
Transport
Block Count
Primary (Accu)
0 ... 65535
1 ... 295
HS MIMO
Transport
Block Count
Primary (Curr)
0 ... 65535
1 ... 295
HS MIMO
Transport
Block Count
Secondary
(Abs)
0 ... 65535
1 ...
42192
HS MIMO
Transport
Block Count
Secondary
(Accu)
0 ... 65535
1 ... 295
73
IE Name
Range/Unit
Arg
HS MIMO
Transport
Block Count
Secondary
(Curr)
0 ... 65535
1 ... 295
Description
Block counts for HSPA transport
block sizes currently in use in
the secondary MIMO stream,
collected over the latest report
period.
Argument: Transport block size
sequence number.
HS MIMO
Transport
Block Size
Primary
0 ... 42192
bits
HS MIMO
Transport
Block Size
Secondary
0 ... 42192
bits
1 ... 295
1 ... 295
HS MIMO
Transport
Block Sizes
Primary No Of
0 ... 295
HS MIMO
Transport
Block Sizes
Secondary No
Of
0 ... 295
1 ... 295
1 ... 295
HS MIMO
Type
0 ... 1
HS MIMO
Type (Text)
Text
74
IE Name
HS MIMO
Type A CQI
Rate
Range/Unit
Arg
0 ... 100
%
1 ... 2
Description
Argument = 1: Percentage of
TTIs with MIMO Type A CQI and
one transport block used.
Argument = 2: Percentage of
TTIs with MIMO Type A CQI and
two transport blocks used.
See 3GPP 25.214, section
6A.1.2.2.
HS MIMO
Type B CQI
Rate
0 ... 100
%
HS-PDSCH
Code Usage
(Accu) %
0 ... 100
%
1 ... 15
Distribution of channelization
code usage on the HS-PDSCH
for the whole of the HSPA
session.
This element does not take DTX
into account, so that values are
computed as percentages of all
blocks, whether used or unused.
Argument: Channelization code
index.
HS-PDSCH
Code Usage
(Curr) %
0 ... 100
%
1 ... 15
HS Phy
Requested
Throughput
(kbit/s)
0 ... 80000
kbit/s
75
IE Name
Range/Unit
Arg
HS Phy
Scheduled
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS Phy
Served
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS Phy
Served
Throughput
(kbit/s) Per
Process
0 ... 80000
kbit/s
HS QPSK
Modulation
Rate
0 ... 100
%
HS-SCCH
Channelisation Code
0 ... 31
1 ... 8
Description
Calculated as: (sum of TBSs for
non-DTX blocks) / (total TTI time
for non-DTX blocks)
Only blocks sent to this phone
are considered in the
calculation, and the CRC
indication does not matter. The
element gives an estimate of the
throughput on the assumption
that all blocks were successfully
transferred.
0 ... 16
HS-SCCH
Channelisation Codes
No Of
76
0 ... 8
IE Name
Range/Unit
Arg
HS-SCCH
Channelisation Codes
(Text)
Text
HS-SCCH
Decode
Success Rate
0 ... 100
%
HS Serving
Cell
0 ... 511
HS Serving
Cell Name
Text
HS Session
0, 1
Description
HS Session
(Text)
HS Transport
Block IEs:
General
remark
HS Transport
Block Count
(Accu)
Text
1 ... 295
77
IE Name
HS Transport
Block Count
(Curr)
Range/Unit
Arg
0 ... 65535
1 ... 295
Description
Block counts for HSPA transport
block sizes currently in use,
collected over the latest report
period.
Argument: Transport block size
sequence number.
HS Transport
Block Count
By Index
(Accu)
0 ... 65535
1 ... 295
HS Transport
Block Count
By Index (Curr)
0 ... 65535
1 ... 295
HS Transport
Block Size
0 ... 42192
bits
1 ... 295
HS Transport
Block Size By
Index
0 ... 42192
bits
HS Transport
Block Sizes No
Of
0 ... 295
HS UL IEs:
General
remark
78
1 ... 295
IE Name
Range/Unit
Arg
HS UL
Average
Serving Grant
0 ... 800
HS UL
Average
Serving Grant
Index
0 ... 40
HS UL
Average TBS
0 ... 23000
bits
HS UL
Average TBS /
TBS Max
E-TFCI
0 ... 100
%
HS UL BLER
1st
0 ... 100
%
HS UL BLER
Residual
0 ... 100
%
HS UL Buffer
Limited Tx
Rate
0 ... 100
%
HS UL DTX
Rate
0 ... 100
%
HS UL E-DCH
Throughput
(kbit/s)
0 ... 80000
kbit/s
HS UL EDPCCH Power
50 ... 33
dBm
HS UL EDPDCH Power
50 ... 33
dBm
Description
79
IE Name
Range/Unit
Arg
HS UL E-TFC
Retransmissions
(Accu) %
0 ... 100
%
0 ... 127
Description
Retransmission rate for each ETFC (Transport Format
Combination), averaged over
the current session.
Argument: E-TFCI.
HS UL E-TFC
Retransmissions
(Curr) %
0 ... 100
%
HS UL E-TFC
Usage (Accu)
%
0 ... 100
%
HS UL E-TFC
Usage (Curr)
%
0 ... 100
%
HS UL Error
Blocks No Of
1st (2nd, 3rd,
4th)
0 ... 100
HS UL Error
Blocks
Residual No Of
0 ... 100
HS UL Happy
Rate
0 ... 100
%
HS UL HICH
ACK Rate
0 ... 100
%
HS UL HICH
NACK Rate
0 ... 100
%
HS UL New
Transmission
Rate
0 ... 100
%
80
0 ... 127
0 ... 127
0 ... 127
IE Name
Range/Unit
Arg
HS UL NonServing Cells
No Of
0 ... 4
0 ... 100
HS UL Number
Of TTIs
0 ... 100
HS UL Power
Limited Tx
Rate
0 ... 100
%
HS UL
Retransmission Rate
0 ... 100
%
Number of retransmissions on
E-DPCCH/E-DPDCH divided by
the number of TTIs.
HS UL Serving
Grant Limited
Tx Rate
0 ... 100
%
HS UL
Successful EAGCH Rate
(All TTIs)
0 ... 100
%
HS UL
Successful
First Tx Rate
0 ... 100
%
Description
81
IE Name
HS UL
Transmission
Distribution
(Accu) %
Range/Unit
Arg
0 ... 100
%
1 ... 17
Description
Distribution of transmission
attempts with respect to the
sequence number of the
attempt. The residual case (no
success after maximum number
of retransmissions) is itself
counted as an attempt.
Each IE value is a percentage of
the total number of transmission
attempts.
This IE is averaged over the
whole of the current session.
Argument:
1: First transmission
2 ... 16: First ... fifteenth retransmission
17: Residual
HS UL
Transmission
Distribution
(Curr) %
0 ... 100
%
HS UL UE
Transmission
Power
Headroom
0 ... 31
dB
UE transmission power
headroom, defined as the ratio
of the UE maximum
transmission power to the
current DPCCH transmission
power. See 3GPP 25.215 and
25.309.
Text
IMEI
82
1 ... 17
Same as HS UL Transmission
Distribution (Accu) % but for the
latest reporting period.
Argument:
1: First transmission
2 ... 16: First ... fifteenth retransmission
17: Residual
IE Name
Inter-freq
Event Criteria
Range/Unit
Arg
Text
1 ... 10
Description
Event criteria governing when
the UE should send interfrequency measurement
reports.
Argument: One argument for
each event criterion.
Inter-freq
Event Name
Text
1 ... 10
Inter-RAT
Event Criteria
Text
1 ... 5
Inter-RAT
Event Name
Text
1 ... 5
Intra-freq Cells
Text
83
IE Name
Intra-freq
Event Criteria
Range/Unit
Arg
Text
1 ... 10
Description
Event criteria governing when
the UE should send intrafrequency measurement
reports.
Argument: One argument for
each event criterion.
Intra-freq
Event Name
Text
1 ... 10
Latitude
90 ... 90
degrees
Text
Longitude
Longitude recorded by
positioning equipment.
Longitude
(Text)
Text
0 ... 999
Text
Latitude (Text)
MCC
Message Hex
Dump Payload
84
0 ... 999
IE Name
Range/Unit
Arg
Description
Mode (Num)
1 ... 7
1: No service
2: Idle mode
3: Dedicated (Connected) mode
(4: Limited service mode)
(5: Scan mode)
(6: Packet mode)
(7: Packet Idle mode)
Mode - System
1 ... 8
Relevant values:
1: WCDMA
2: GSM
Mode - System
(Text)
Text
Mon Neigh
Cell Name
Text
1 ... 6
Mon Neigh
CPICH Ec/No
34 ... 0
dB
1 ... 6
Mon Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Mon Neigh
CPICH Tx
Power
Mon Neigh No
Of Members
Mon Neigh
Pathloss
31 ... 50
dBm
1 ... 6
0 ... 6
30 ... 165
dB
1 ... 6
85
IE Name
Range/Unit
Arg
Mon Neigh SC
0 ... 511
1 ... 6
Description
Scrambling code of each
monitored neighbor.
Argument: Neighbor identity.
Mon Neigh
UARFCN DL
MS Behavior
Modified (Text)
0 ... 16383
1 ... 6
(frequency
band
dependent)
Text: B,
C, or a
combination
of these
letters (or
empty
string)
Network
Search No of
UARFCNs
0 ... 800
ns
Network
Search SC
0 ... 511
1 ... 800
ns
Network
Search
UARFCN
86
410 ...
10840
(frequency
band
dependent)
1 ... 800
ns
IE Name
Other/Own,
Max 1 SC
Range/Unit
Arg
Description
0 ... 10
dB
0 ... 10
dB
pi
Other/Own,
Max 2 SCs
0 ... 10
dB
0 ... 10
dB
pi
Other/Own,
Max 3 SCs
0 ... 10
dB
0 ... 10
dB
pi
87
IE Name
Other/Own,
Max 4 SCs
Range/Unit
Arg
Description
0 ... 10
dB
0 ... 10
dB
pi
Other/Own
2nd (etc.)
elements
PDP IEs:
General
remark
0 ... 10
dB
0 ... 10
dB
pi
PDP Access
Point Name
Text
1 ... 11
PDP Address
Text
1 ... 11
PDP Contexts
Active
0 ... 11
Text
1 ... 11
3 ... 11
1 ... 11
PDP Mean
Throughput
Text
1 ... 11
PDP NSAPI
5 ... 15
1 ... 11
PDP Peak
Throughput
Text
1 ... 11
PDP
Precedence
Class
Text
1 ... 11
PDP Delay
Class
PDP LLC SAPI
88
IE Name
Range/Unit
Arg
PDP Radio
Priority
Text
1 ... 11
PDP Reliability
Class
Text
1 ... 11
PESQ
elements
Poss No of AS
Members
Description
0 ... 10
dB
pi
Poss No of
AS Members
2nd (etc.)
elements
0 ... 10
0 ... 10
dB
Power Control
Indication DL
1, 0, 1
pi
Same as Poss No of AS
Members but for the second
(etc.) UMTS frequency scanned.
89
IE Name
Range/Unit
Arg
Description
Power Control
Indication UL
1, 0, 1
RACH Initial
TX
50 ... 34
dBm
RACH Max
Preambles
0 ... 64
RACH
Message TX
50 ... 34
dBm
RACH
Transmitted
Preambles
0 ... 64
RAT Control
0 ... 3
RAT Control
(Text)
Text
RB Setup UL
DPCH SC
0 ... 108
RLC AM DL
Log Ch Type
Text
1 ... 4
90
IE Name
RLC AM DL
PDU Retran
(%)
Range/Unit
Arg
0 ... 100
%
1 ... 4
Description
Radio Link Control
(Acknowledged Mode,
downlink): PDU retransmission
percentage. Calculated as:
no. of NACKed PDUs 100
-------------------------------------------------------------------------total no. of PDUs
0 ... 80000
kbit/s
1 ... 4
RLC AM DL
SDU Thr
0 ... 80000
kbit/s
1 ... 4
RLC AM UL
Log Ch Type
Text
1 ... 4
91
IE Name
RLC AM UL
PDU Retran
(%)
Range/Unit
Arg
0 ... 100
%
1 ... 4
Description
Radio Link Control
(Acknowledged Mode, uplink):
PDU retransmission
percentage. Calculated as:
no. of NACKed PDUs 100
-------------------------------------------------------------------------total no. of PDUs
0 ... 80000
kbit/s
1 ... 4
RLC AM UL
SDU Thr
0 ... 80000
kbit/s
1 ... 4
RLC DL Entity
Data Mode
Text:
TM, UM,
or AM
1 ... 32
RLC DL
Throughput
0 ... 80000
kbit/s
1 ... 32
RLC No Of
Entities
0 ... 32
92
IE Name
Range/Unit
Arg
RLC UL Entity
Data Mode
Text:
TM, UM,
or AM
1 ... 32
Description
Uplink RLC entity data mode:
Transparent Mode,
Unacknowledged Mode, or
Acknowledged Mode.
Argument: RLC entity.
RLC UL
Throughput
0 ... 80000
kbit/s
1 ... 32
RLC/Trsp DL
Throughput
(Best)
0 ... 80000
kbit/s
RLC/Trsp UL
Throughput
(Best)
0 ... 80000
kbit/s
RRC
Connection
Reject Cause
0, 1
0: Congestion
1: Unspecified
See 3GPP 25.331, section
10.3.3.31.
RRC
Connection
Reject Wait
Time
0 ... 16
s
93
IE Name
RRC State
Range/Unit
Arg
0 ... 5
Description
State of RRC protocol:
0: No service
1: Idle mode
2: Connected_Cell_FACH
3: Connected_Cell_DCH
4: Connected_Cell_PCH
5: Connected_URA_PCH
The state is set to idle when the
UE registers, and the
information element is then
updated each time the state
changes.
See 3GPP 25.331, chapter 7.
RRC State
(Text)
Text
SAN Cell Id
0 ... 228 1
1 ... 38
0 ... 216 1
1 ... 38
Text:
0000 ...
FFFF
1 ... 38
SAN Cell Id
(RNC Part)
0 ... 212 1
1 ... 38
94
IE Name
SAN Cell Id
(RNC Part
Hex)
SAN Cell
Name
Range/Unit
Arg
Text:
000 ...
FFF
1 ... 38
Text
1 ... 38
Description
RNC part of SAN Cell Id: bits 0
through 11 in hexadecimal.
Argument: See SAN Cell Id.
1 ... 4
1 ... 38
Text
1 ... 38
SAN CPICH
Ec/No
34 ... 0
dB
1 ... 38
SAN CPICH
RSCP
140 ... 15
dBm
1 ... 38
95
IE Name
SAN CPICH
Tx Power
Range/Unit
Arg
31 ... 50
dBm
1 ... 38
Description
Serving/Active Set + Neighbors
window: Primary CPICH
transmit power for each cell
listed.
Argument: Window row.
SAN HS Cell
Type
1, 2
1 ... 38
SAN HS Cell
Type Abbr Str
SAN No of
Members
SAN Pathloss
Text
1 ... 38
0 ... 38
30 ... 165
dB
1 ... 38
SAN SC
0 ... 511
1 ... 38
SAN UARFCN
DL
SAN URA Id
0 ... 16383
1 ... 38
(frequency
band
dependent)
0 ... 228 1
1 ... 38
96
IE Name
Sc Best IEs:
General
remark
Range/Unit
Arg
Description
Sc Best Aggr
Eb/Io (dB)
10 ... 21
dB
1 ... 512
pi
Sc Best Aggr
Ec (dBm)
130 ... 25
dBm
1 ... 512
pi
Sc Best Aggr
Ec/Io (dB)
30 ... 0
dB
1 ... 512
pi
0 ... 90
dB
1 ... 512
pi
97
IE Name
Sc Best Cell
Name
Range/Unit
Arg
Text
1 ... 512
pi
c
p
Description
Pilot scanning: Deduced name
of the cell that uses each
scanned scrambling code.
The algorithm determining the
cell name takes as input the SC
number, the UARFCN, and the
position reported. It searches
the cell file for cells with
matching SC number and
UARFCN within a 50 km radius.
If multiple matches are found,
the cell closest to the position is
selected.
If no positioning data is
available, the information
element will still be presented,
but the cell names may then of
course be wrong. The algorithm
in this case simply picks the first
cell in the cell file with matching
SC number and UARFCN.
Invalid if no cell file is loaded.
Sc Best Cell
Type
1 ... 3
1 ... 512
pi
c
p
98
IE Name
Range/Unit
Arg
Description
Sc Best Delay
Spread
0 ... 255
chips
1 ... 512
pi
115 ... 25
dBm
pi
Sc Best No of
SCs
0 ... 512
pi
Sc Best Peak
Eb/Io (dB)
10 ... 21
dB
1 ... 512
pi
Sc Best Peak
Ec (dBm)
130 ... 25
dBm
1 ... 512
pi
Sc Best Peak
Ec/Io (dB)
30 ... 0
dB
1 ... 512
pi
130 ... 25
dBm
1 ... 512
pi
Sc Best Io
Sc Best
P-SCH Ec
(dBm)
99
IE Name
Range/Unit
Arg
Description
Sc Best
P-SCH Ec/Io
(dB)
30 ... 0
dB
1 ... 512
pi
Sc Best Rake
Finger Count
0 ... 51
1 ... 512
pi
Sc Best SC
0 ... 511
1 ... 512
pi
Sc Best SC
Group
0 ... 7
1 ... 512
pi
Sc Best SIR
(dB)
25 ... 30
dB
1 ... 512
pi
130 ... 25
dBm
1 ... 512
pi
Sc Best
S-SCH Ec/Io
(dB)
30 ... 0
dB
1 ... 512
pi
Sc Best Time
Offset
0 ... 38399
chips
1 ... 512
pi
Sc Best Time
Offset Slot Pos
1 ... 2560
1 ... 512
pi
Sc Best
S-SCH Ec
(dBm)
100
IE Name
Sc Best
UARFCN
Range/Unit
Arg
Description
410 ...
10840
pi
110 ... 70
dBm
pi
Text
pi
(frequency
band
dependent)
Sc Best UL
Interference
Sc 1st (etc.)
Intra-freq Cells
101
IE Name
SCH TS Sc
Es/Io (dB)
Range/Unit
Arg
Description
24 ... 0
dB
1...2560
(max;
see
Descr.)
ts
SCH TS Sc
No Of Segm
0 ... 2560
ts
SCH TS Sc
Segm
1 ... 2560
1...2560
(max;
see
Descr.)
ts
SCH TS Sc
Time Diff 1-2
1 ... 2560
chips
ts
SCH TS Sc
Time Diff 2-3
1 ... 2560
chips
ts
102
IE Name
SCH TS Sc
UARFCN
Range/Unit
Arg
410 ...
10840
ts
Description
SCH timeslot scanning:
UARFCN scanned.
(frequency
band
dependent)
Sector Control
0, 1
Sector Control
(Text)
Text
Serving IEs:
General
remark
Serving Cell Id
0 ... 228 1
Serving Cell Id
(CI Part)
0 ... 216 1
Serving Cell Id
(CI Part Hex)
Text:
0000 ...
FFFF
Serving Cell Id
(RNC Part)
0 ... 212 1
Serving Cell Id
(RNC Part
Hex)
Text:
000 ...
FFF
Serving Cell
LAC
0 ... 65535
Serving Cell
LAC (Hex)
Text:
0000 ...
FFFF
103
IE Name
Range/Unit
Arg
Description
Serving Cell
Name
Text
Serving Cell
RAC
0 ... 255
Serving Cell
RAC (Hex)
Text:
00 ... FF
Serving
CPICH Ec/No
34 ... 0
dB
Serving
CPICH RSCP
140 ... 15
dBm
31 ... 50
dBm
Serving
Pathloss
30 ... 165
dB
0 ... 511
0 ... 16383
0 ... 228 1
SF DL
1 ... 512
SF UL
1 ... 512
Serving SC
Serving
UARFCN DL
Serving URA
Id
104
(frequency
band
dependent)
IE Name
SHO Event
Rate
Range/Unit
Arg
0 ... 50
0 ...
3600
Description
Number of radio link events
(both failures and successes)
over the last arg seconds, where
arg is the value of the argument.
Regarding the events, see
section 7.2.
Argument: See above.
Argument = 0 means that the
events are counted from the
beginning of the logfile.
SHO Event
Success Rate
0 ... 100
%
105
IE Name
SHO Percent
Softer
Range/Unit
Arg
Description
0 ... 100
%
SHO State
0 ... 2
106
IE Name
SHO State
(Text)
Range/Unit
Arg
Text
Description
Soft handover state as plain
text: Soft, Softer, or
Unknown. See SHO State.
Requires that a cell file has been
loaded (otherwise the value will
always be Unknown).
Invalid when AS No Of
Members < 2.
SIR
20 ... 30
dB
Signal-to-interference ratio,
measured on DPCCH. See
3GPP 25.215, section 5.2.2.
SIR Target
20 ... 30
dB
Spectr Ana
IEs: General
remark
Spectr Ana Sc
DL Freq
1 ...
2560
ss
Spectr Ana Sc
DL No of Freq
0 ... 2560
ss
Spectr Ana Sc
DL RSSI
(dBm)
130 ... 20
dBm
1 ...
2560
ss
Spectr Ana Sc
UL Freq
1 ...
2560
ss
Spectr Ana Sc
UL No of Freq
0 ... 2560
ss
107
IE Name
Range/Unit
Arg
Spectr Ana Sc
UL RSSI
(dBm)
130 ... 20
dBm
1 ...
2560
ss
0 ... 800
ms
Speech Path
Delay
Description
Spectrum analysis: RSSI of
uplink frequencies scanned.
Speed (km/h)
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 155
mph
Speed in mph.
SQI
20 ... 30
dBQ
SQI MOS
1 ... 5
MOS
Text
1 ... 6
108
IE Name
Str Neigh
CPICH Ec/No
Range/Unit
Arg
34 ... 0
dB
1 ... 6
Description
CPICH Ec/No of neighbors
(monitored as well as detected)
sorted by signal strength in
descending order.
Argument: 1 is the strongest
neighbor, etc.
Str Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Str Neigh SC
0 ... 511
1 ... 6
3, 4
1 ... 6
Str Neigh
UARFCN DL
0 ... 16383
1 ... 6
(frequency
band
dependent)
Time (Text)
Text
109
IE Name
Range/Unit
Arg
Trsp Ch BLER
(%, Worst)
0 ... 100
%
Trsp Ch BLER,
DL (Log)
0 ... 63
1 ... 32
See
Description
Description
Block error rate on the worst
downlink transport channel
(DCH only) in percent.
Block error rate on each
downlink transport channel
(DCH only), converted to
logarithmic value. Regarding the
conversion, see 3GPP 25.331,
section 10.3.5.10.
Argument: Transport channel
index.
Note: Nokia UEs do not deliver
separate values for each
transport channel, but only an
average over all of them (arg =
1).
Trsp Ch BLER,
DL (%)
0 ... 100
%
1 ... 32
Trsp Ch BLER
Target (%)
0 ... 100
%
1 ... 32
Trsp Ch Id DL
1 ... 32
1 ... 32
Trsp Ch No Of
DL
110
0 ... 32
IE Name
Range/Unit
Arg
Trsp Ch No Of
UL
0 ... 32
Trsp Ch No Of
Error Blocks
0 ... 4095
1 ... 32
Description
Number of uplink transport
channels.
Number of erroneous blocks on
each transport channel. (The
number of reports over which
this is summed varies between
phones.) Compare Trsp Ch
BLER, DL (Log).
Argument: Transport channel
index.
Trsp Ch Rec
Blocks
0 ... 4095
1 ... 32
Trsp Ch
Throughput DL
(kbit/s)
0 ... 80000
kbit/s
Trsp Ch
Throughput DL
Total (kbit/s)
0 ... 80000
kbit/s
Trsp Ch
Throughput UL
(kbit/s)
0 ... 80000
kbit/s
Trsp Ch
Throughput UL
Total (kbit/s)
0 ... 80000
kbit/s
1 ... 32
1 ... 32
111
IE Name
Trsp Ch Type
DL
Range/Unit
Arg
Text
1 ... 32
Description
Downlink transport channel
type: DCH or FACH.
Argument: Transport channel
index.
Trsp Ch Type
UL
Text
1 ... 32
UE Initial
Transmit
Power
60 ... 44
dBm
UE Tx Power
60 ... 44
dBm
UL
Interference
Serving
110 ... 70
dBm
UTRA Carrier
RSSI
130 ... 20
dBm
VTQI
112
1 ... 5
MOS
3.3.
All elements in this category are supported by both DRT and PCTel scanners
unless otherwise noted in section 5.4.
The argument, where present, always points to an LTE cell unless otherwise
stated.
Information Element Table
IE Name
Altitude (ft)
Altitude (m)
EPower IEs:
General
remark
Range/Unit
Arg
1312 ...
29028
ft
400 ...
8848
m
Description
Height above sea level in feet.
Reported by positioning equipment.
Height above sea level in meters.
Reported by positioning equipment.
EPower Ana
Sc DL Freq
(kHz)
0 ... 6 106
kHz
1 ...
2559
EPower Ana
Sc DL No Of
Freq
0 ... 2560
EPower Ana
Sc DL RSSI
(dBm)
140 ... 25
dBm
1 ...
2559
Firmware
Version
Text
Hardware
Text
Scanner model.
Hardware ID
Text
0 ... 360
degrees
Heading (deg)
113
IE Name
Range/Unit
Arg
90 ... 90
degrees
Text
Longitude
Longitude
(Text)
Text
Mode
Text
Not used.
Mode (Num)
1 ... 7
Not used.
Mode - System
1 ... 8
Not used.
Mode - System
(Text)
Text
Not used.
Latitude
Latitude (Text)
Sc 1st IEs:
General
remark
Description
Sc 1st BCH
RSSI (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st Cell
Distance (m)
0 ... 1 105
m
0 ... 504
Sc 1st Cell
Identity
0 ... 503
0 ... 504
Sc 1st Cell
Name
Text
0 ... 504
Sc 1st CFO
(Hz)
10000 ...
10000
Hz
114
IE Name
Range/Unit
Arg
0 ... 29649
0 ... 504
Sc 1st No Of
Cell Identities
0 ... 504
Sc 1st P-SCH
RP (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RS
CINR (dB)
40 ... 60
dB
0 ... 504
Sc 1st RSRP
(dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RSRP
Tx1 (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RSRP
Tx2 (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RSRP
Tx3 (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RSRP
Tx4 (dBm)
140 ... 25
dBm
0 ... 504
Sc 1st RSRQ
(dB)
40 ... 40
dB
0 ... 504
Sc 1st RSRQ
Tx1 (dB)
40 ... 40
dB
0 ... 504
Sc 1st RSRQ
Tx2 (dB)
40 ... 40
dB
0 ... 504
Sc 1st RSRQ
Tx3 (dB)
40 ... 40
dB
0 ... 504
Sc 1st RSRQ
Tx4 (dB)
40 ... 40
dB
0 ... 504
Sc 1st
EARFCN
Description
EARFCN of each cell scanned. See
3GPP 36.101, section 5.4.4.
Total number of detected Cell
Identities.
115
IE Name
Sc 1st SCH
CINR (dB)
Range/Unit
Arg
Description
40 ... 60
dB
0 ... 504
Sc 1st SCH RQ
(dB)
40 ... 40
dB
0 ... 504
Sc 1st S-SCH
RP (dBm)
Sc 1st Time
Offset (s)
140 ... 25
dBm
0 ... 504
0 ... 107
s
0 ... 504
Sc 2nd (etc.)
IEs: General
remark
Sc Best IEs:
General
remark
Note: Fewer IEs are provided than for any individual EARFCNs.
Sc RSSI IEs:
General
remark
Sc RSSI (dBm)
140 ... 25
dBm
1 ...
1000
Sc RSSI (dBm)
[EARFCN]
140 ... 25
dBm
0 ...
29649
116
Argument: EARFCN.
IE Name
Range/Unit
Arg
Sc RSSI Band
Text
1 ...
1000
Sc RSSI
Bandwidth
Text
1 ...
1000
Sc RSSI Count
0 ... 1000
Sc RSSI
EARFCN
0 ... 29649
1 ...
1000
Sc RSSI
Frequency
(kHz)
0 ... 6 106
kHz
1 ...
1000
Spectr Ana
IEs: General
remark
Description
Spectr Ana Sc
Freq (kHz)
0 ... 6 106
kHz
1 ...
3001
Spectr Ana Sc
No Of Freq
0 ... 3001
Spectr Ana Sc
RSSI (dBm)
140 ... 25
dBm
1 ...
3001
Speed (km/h)
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 160
mph
Speed in mph.
Strongest Sc
RSSI IEs:
General
remark
Strongest Sc
RSSI (dBm)
140 ... 25
dBm
1 ... 16
Strongest Sc
RSSI Band
Text
1 ... 16
117
IE Name
Range/Unit
Arg
Strongest Sc
RSSI EARFCN
0 ... 29649
1 ... 16
Scanned EARFCN.
Strongest Sc
RSSI
Frequency
(kHz)
0 ... 6 106
kHz
1 ... 16
Scanned frequency.
Text
0 ...
86400000
ms
Time
Time (ms)
118
Description
3.4.
This category includes a large number of elements that are not TDD-specific,
as well as many that also make an appearance in the GSM and/or WCDMA
categories. The latter elements relate to parts of the 3GPP specifications that
TD-SCDMA shares with GSM and/or WCDMA.
Note that dual mode TD-SCDMA/GSM terminals also populate elements in
the GSM category; see section 5.2 for specifics.
Information Element Table
IE Name
Range/Unit
Arg
1312 ...
29028
ft
400 ...
8848
m
20 ... 20
dB
Text
GSM Neighbor
ARFCN
See section
3.1 under
ARFCN
BCCH
1 ... 16
GSM Neighbor
BSIC
Text
1 ... 16
Altitude (ft)
Altitude (m)
Firmware
Version
Description
Height above sea level in feet.
Reported by positioning equipment.
Height above sea level in meters.
Reported by positioning equipment.
GSM Neighbor
RxLev (dBm)
Hardware
Heading
110 ... 47
dBm
1 ... 16
Text
Device model.
0 ... 360
degrees
119
IE Name
Range/Unit
Arg
Description
HS 16-QAM
Modulation
Rate
0 ... 100
%
HS CQI (Max)
0 ... 30
See
Description
0 ... 30
HS CQI (Min)
0 ... 30
HS-DSCH ACK
Rate
0 ... 100
%
HS-DSCH
BLER
0 ... 100
%
HS-DSCH DTX
Rate
0 ... 100
%
HS-DSCH
NACK Rate
0 ... 100
%
HS-DSCH
Retransmission Rate
0 ... 100
%
HS MAC PDU
Receive Rate
(kbit/s)
0 ... 2500
kbit/s
HS-PDSCH
Number Of
Codes
0 ... 16
HS-PDSCH
SIR
20 ... 20
dB
120
IE Name
Range/Unit
Arg
Description
HS QPSK
Modulation
Rate
0 ... 100
%
HS Session
0 ... 1
HS Session
(Text)
HS Transport
Block Count
(Accu)
Text
0 ... 65535
1 ... 254
HS Transport
Block Count
(Curr)
0 ... 65535
1 ... 254
HS Transport
Block Size
0 ... 14043
bits
1 ... 254
HS Transport
Block Sizes No
Of
IMEI
Latitude
Latitude (Text)
0 ... 254
Text
90 ... 90
degrees
Text
121
IE Name
Range/Unit
Arg
Longitude
Longitude
(Text)
Text
Mode
Text
1 ... 7
Relevant values:
Mode (Num)
Description
2: Idle mode
3: Dedicated mode
Mode - System
1 ... 8
Relevant values:
2: GSM
8: TD-SCDMA
Mode - System
(Text)
Neighbor IEs:
General
remark
Text
Neighbor
Carrier RSSI
131 ... 25
dBm
1 ... 32
Neighbor CPI
0 ... 127
1 ... 32
Neighbor
Pathloss
46 ... 158
dB
1 ... 32
30 ... 0
dB
1 ... 32
116 ... 25
dBm
1 ... 32
Neighbor
UARFCN
0 ... 16383
1 ... 32
122
(frequency
band
dependent)
IE Name
PDP Context
Completion
Time (ms)
Range/Unit
Arg
0 ... 60000
ms
1 ... 11
Description
Time to complete establishment of
PDP context, counted from the first
Activate PDP Context Request
message to Activate PDP Context
Accept.
Argument: PDP context index.
RLC DL
Throughput
(kbit/s)
0 ... 2500
kbit/s
1 ... 32
RLC UL
Retransmission Ratio
(%)
0 ... 100
%
RLC UL
Throughput
(kbit/s)
0 ... 1000
kbit/s
RRC State
Text
RRC State
(Num)
0 ... 5
1 ... 32
0: No service
1: Idle mode
2: Connected_Cell_FACH
3: Connected_Cell_DCH
4: Connected_Cell_PCH
5: Connected_URA_PCH
The state is set to idle when the UE
registers, and the information element
is then updated each time the state
changes.
See 3GPP 25.331, chapter 7.
Sc <nth>
elements:
General
remark
123
IE Name
Range/Unit
Arg
Sc ... Cell
Distance (m)
0 ... 1 105
m
1 ... 128
Sc ... Cell
Name
Text
1 ... 128
Sc ... CPI
0 ... 127
1 ... 128
Sc ... Ec/Io
(dB)
32 ... 0
dB
1 ... 128
Sc ... Eps/Io
(dB)
32 ... 0
dB
1 ... 128
115 ... 25
dBm
1 ... 128
Sc ... No Of
CPI
0 ... 128
20 ... 20
dB
1 ... 128
Sc ... Time
Offset
0 ... 25599
chip/4
1 ... 128
0 ... 16383
1 ... 128
Scanned UARFCN.
Sc ... Io (dBm)
Sc ... UARFCN
(frequency
band
dependent)
124
Description
IE Name
Sc Best
elements
Range/Unit
Arg
Description
Sc RSSI
elements:
General
remark
Sc RSSI (dBm)
131 ... 25
dBm
1 ...
1500
Sc RSSI (dBm)
[UARFCN]
131 ... 25
dBm
0 ...
16383
Sc RSSI Band
Text
1 ...
1500
Sc RSSI Count
0 ... 1500
Sc RSSI
Frequency
(MHz)
0 ... 6000
MHz
1 ...
1500
Frequency scanned.
Sc RSSI
UARFCN
0 ... 16383
1 ...
1500
Serving C/I
30 ... 60
dB
Argument: UARFCN.
Serving Carrier
RSSI
131 ... 25
dBm
Serving Cell Id
0 ... 228 1
125
IE Name
Range/Unit
Arg
Serving Cell Id
(Hex)
Text:
0000000
...
FFFFFFF
0 ... 127
0 ... 16383
Serving CPI
Serving
Current
UARFCN
(frequency
band
dependent)
Description
Serving DRX
Coefficient
3 ... 9
Serving LAC
0 ... 65535
Serving LAC
(Hex)
Text:
0000 ...
FFFF
Serving Max
Allowed UL
TxPower (dBm)
50 ... 33
dBm
Serving MCC
Serving MNC
Serving
Pathloss
46 ... 158
dB
30 ... 0
dB
116 ... 25
dBm
11 ... 20
dB
126
IE Name
Serving
Primary
UARFCN
Range/Unit
Arg
Description
0 ... 16383
(frequency
band
dependent)
Serving
Q-hysteresis
(dB)
0 ... 40
dB
Serving
Q-rxlev-min
(dBm)
115 ... 25
dBm
Serving
S-intersearch
Threshold
0 ... 91
dB
Serving
S-intrasearch
Threshold
0 ... 91
dB
0 ... 31
s
Speed (km/h)
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 155
mph
Speed in mph.
Strongest Sc
RSSI IEs:
General
remark
Strongest Sc
RSSI (dBm)
131 ... 25
dBm
1 ... 32
Strongest Sc
RSSI Band
Text
1 ... 32
127
IE Name
Range/Unit
Arg
Strongest Sc
RSSI
Frequency
(MHz)
0 ... 6000
MHz
1 ... 32
Scanned frequency.
Strongest Sc
RSSI UARFCN
0 ... 16383
1 ... 32
Scanned UARFCN.
T3212
0 ... 255
deci-hours
Text
0 ...
86400000
ms
Time
Time (ms)
Timeslot IEs:
General
remark
Description
Timeslot Code
Count
0 ... 8
0 ... 6
Timeslot Code
Count HSPDSCH
0 ... 16
0 ... 6
Timeslot Code
Spreading
Factor
1 ... 16
0 ... 6
Timeslot Count
DL
1 ... 6
Timeslot Count
UL
1 ... 6
128
IE Name
Range/Unit
Arg
Description
Text
0 ... 6
Timeslot DPCH
RSCP (dBm)
116 ... 25
dBm
0 ... 6
Timeslot DPCH
RSCP Sum
(dBm)
116 ... 25
dBm
30 ... 60
dB
0 ... 6
116 ... 25
dBm
0 ... 6
116 ... 25
dBm
0 ... 6
Timeslot ISCP
(dBm)
116 ... 25
dBm
0 ... 6
Timing
Advance
(chips)
16 ... 240
chips
Transport
Channel BLER
DL
0 ... 100
%
1 ... 32
Transport
Channel BLER
Total DL
0 ... 100
%
Transport
Channel Count
DL
0 ... 32
Transport
Channel ID DL
1 ... 32
1 ... 32
Timeslot
Direction
129
IE Name
Range/Unit
Arg
UE TxPower
50 ... 33
dBm
UpPCH
TxPower (dBm)
120 ... 30
dBm
130
Description
3.5.
IE Name
Range/Unit
Arg
0 ... 7
Access
Channel
Preamble Size
0 ... 255
Access Initial
Power Offset
0 ... 255
dB
Access Max
Req Seq
0 ... 15
Access Max
Rsp Seq
0 ... 15
Access Num
Step
0 ... 15
Access Power
Increment
0 ... 255
dB
Access Probe
Number
0 ... 255
Access Probe
Sequence
Number
0 ... 255
Access
Channel Max
Capsule Size
Description
Text
1 ... 6
131
IE Name
Range/Unit
Arg
Description
Text
1 ... 6
Active Set
Channel
0 ... 1199
1 ... 6
Active Set
Count
0 ... 6
Active Set
DCCH Code
Channel
0 ... 2047
1 ... 6
Active Set
DCCH QOF
Mask Id
0 ... 3
1 ... 6
157 ... 10
dBm
1 ... 6
Active Set
Ec/Io
32 ... 0
dB
1 ... 6
Active Set
Ec/Io Sum
32 ... 0
dB
Active Set
FCH Code
Channel
0 ... 2047
1 ... 6
Active Set
FCH QOF
Mask Id
0 ... 3
1 ... 6
0 ... 511
1 ... 6
0 ... 2047
1 ... 6
Active Set Ec
Active Set PN
Active Set
SCH Code
Channel
132
IE Name
Range/Unit
Arg
Description
Active Set
SCH QOF
Mask Id
0 ... 3
1 ... 6
Active Set
Serving Io
125 ... 25
dBm
Altitude (ft)
1312 ...
29028
ft
400 ...
8848
m
Analog RSSI
120 ... 30
dBm
Analog SCC
0 ... 255
Analog Tx
Power Level
0 ... 7
Base ID
0 ... 65535
Call Blocked
Count
0 ... 1000
Call Dropped
Count
0 ... 1000
Call Success
Count
0 ... 1000
Altitude (m)
133
IE Name
Calls Blocked
(%)
Range/Unit
Arg
0 ... 100
%
Description
Calculated as:
# blocks /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Regarding the events, see section 7.3.
Calls Dropped
(%)
0 ... 100
%
Calculated as:
# drops /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Regarding the events, see section 7.3.
Candidate Set
IEs: General
remark
Candidate Set
Band Class
Text
1 ... 6
Candidate Set
Cell Name
Text
1 ... 6
0 ... 1023
1 ... 6
Candidate Set
Channel
(dependent
on band
class)
Candidate Set
Count
0 ... 6
Candidate Set
Ec
157 ... 10
dBm
1 ... 6
134
IE Name
Range/Unit
Arg
Candidate Set
Ec/Io
32 ... 0
dB
1 ... 6
Candidate Set
PN
0 ... 511
1 ... 6
Text
CDMA Rx
State
Country ID
Description
One of:
Entering CDMA
Sync Channel
Paging Channel
Traffic Channel
Exit
0 ... 999
Dialed Number
Text
DSC Channels
0 ... 8
0 ... 15
EV-DO Access
Failure Rate
(%)
0 ... 100
%
EV-DO Access
Max Probe
Seq
0 ... 255
EV-DO Access
Probe Count
0 ... 255
EV-DO Access
Probe Num
Step
0 ... 255
135
IE Name
Range/Unit
Arg
EV-DO Access
Probe Seq
Count
0 ... 255
EV-DO Access
Result
0 ... 3
EV-DO Active
Set IEs:
General
remark
Description
EV-DO Active
Set DRC
Cover
0 ... 7
1 ... 6
EV-DO Active
Set DRC Lock
Text
1 ... 6
EV-DO Active
Set Drop Timer
Active
0 ... 1
1 ... 6
EV-DO Active
Set Drop Timer
Expired
0 ... 1
EV-DO Active
Set MAC Index
0 ... 127
1 ... 6
EV-DO Active
Set Predicted
DRC
0 ... 7
EV-DO Active
Set Predicted
SINR
30 ... 15
dB
136
0: Inactive
1: Active
1 ... 6
IE Name
Range/Unit
Arg
Description
EV-DO Active
Set RAB Offset
0 ... 255
1 ... 6
EV-DO Active
Set RAB
Usage (%)
0 ... 100
%
1 ... 6
EV-DO Active
Set RPC Index
0 ... 15
1 ... 6
EV-DO Active
Set RPC
Indication
1 ... 1
1 ... 6
EV-DO Active
Set Serving
DRC
0 ... 7
EV-DO Active
Set Serving
PN
0 ... 511
EV-DO Active
Set Serving
RPC
0 ... 15
EV-DO Active
Set Serving
SINR
30 ... 15
dB
EV-DO Active
Set SINR
30 ... 15
dB
1 ... 6
EV-DO Active
Set Window
Center
0 ... 23768
chips
1 ... 6
137
IE Name
Range/Unit
Arg
Description
EV-DO Actual
RRI (kbit/s)
0 ... 1800
kbit/s
EV-DO ALMP
State (Num)
0 ... 5
Text
EV-DO AT
State (Num)
0 ... 5
EV-DO AT
State (Text)
Text
EV-DO
Attempt
Duration
0 ... 255
timeslots
EV-DO
Attempt
Transaction Id
0 ... 255
EV-DO Best
Pilot PN
0 ... 511
EV-DO Best
SINR
30 ... 15
dB
EV-DO ALMP
State (Text)
138
IE Name
EV-DO
Candidate Set
IEs: General
remark
Range/Unit
Arg
Description
EV-DO
Candidate Set
Drop Timer
Active
0 ... 1
EV-DO
Candidate Set
Drop Timer
Expired
0 ... 1
EV-DO
Candidate Set
Window
Center
0 ... 23768
1 ... 6
EV-DO Color
Code
0 ... 255
EV-DO
Condition RRI
(kbit/s)
0 ... 1800
kbit/s
EV-DO
Connected
State (Num)
0 ... 5
EV-DO
Connected
State (Text)
Text
EV-DO
Connection
Failure Rate
(%)
0 ... 100
%
1 ... 6
1 ... 6
139
IE Name
Range/Unit
Arg
EV-DO DRC
Rate Received
(kbit/s)
0 ... 4000
kbit/s
EV-DO DRC
Rate Received
Average
(kbit/s)
0 ... 4000
kbit/s
EV-DO DRC
Rate
Requested
(kbit/s)
0 ... 4000
kbit/s
EV-DO DRC
Rate
Requested
Average
(kbit/s)
0 ... 4000
kbit/s
EV-DO DRC
State
Text
EV-DO Finger
IEs: General
remark
EV-DO Finger
Antenna
Selection
Description
0 ... 1
1 ... 12
EV-DO Finger
C/I Antenna 0
30 ... 15
dB
1 ... 12
EV-DO Finger
C/I Antenna 1
30 ... 15
dB
1 ... 12
140
IE Name
Range/Unit
Arg
EV-DO Finger
Diversity
Enabled
0 ... 1
1 ... 12
Description
State of EV-DO antenna diversity.
Relevant only if the access terminal is
equipped with two antennas.
0: Not enabled
1: Enabled
EV-DO Finger
Index
1 ... 12
1 ... 12
EV-DO Finger
MSTR
0 ... 232 1
chip/8
EV-DO Finger
MSTR Error
32767 ...
32767
chip/8
1 ... 12
EV-DO Finger
MSTR Pilot PN
0 ... 511
EV-DO Finger
RPC Cell
Index
1 ... 6
1 ... 12
EV-DO FL IEs:
General
remark
EV-DO FL Bad
Packet Count
0 ... 231 1
0 ... 25
EV-DO FL Bad
Packet Count
(Total)
0 ... 231 1
0 ... 25
EV-DO FL Bad
Packet Rate
0 ... 100
%
0 ... 25
141
IE Name
Range/Unit
Arg
Description
EV-DO FL Bad
Packet Rate
Multi User
(Total)
0 ... 100
%
0 ... 25
EV-DO FL
Good Packet
Count
0 ... 231 1
0 ... 25
EV-DO FL
Good Packet
Count (Total)
0 ... 231 1
0 ... 25
EV-DO FL
Good Packet
Rate
0 ... 100
%
0 ... 25
EV-DO FL
Multi
Throughput
(kbit/s)
0 ... 4000
kbit/s
EV-DO FL
Packet Size
Text
0 ... 25
EV-DO FL
Throughput
(kbit/s)
0 ... 4000
kbit/s
Text
0 ... 5
EV-DO Hybrid
Mode
EV-DO Idle
State (Num)
142
0: Inactive
1: Monitor
2: Sleep
3: Connection Setup
4: Suspend
IE Name
Range/Unit
Arg
Description
EV-DO Idle
State (Text)
Text
EV-DO Init
State (Num)
0 ... 5
EV-DO Init
State (Text)
Text
EV-DO
Neighbor Set
Age
0 ... 65535
1 ... 40
EV-DO
Neighbor Set
Window Offset
0 ... 65535
chips
1 ... 40
EV-DO
Neighbor Set
Window Size
0 ... 65535
chips
1 ... 40
EV-DO OVHD
Message State
(Num)
0 ... 5
EV-DO OVHD
Message State
(Text)
Text
EV-DO PA
State
Text
0 ... 100
%
EV-DO PER
Instantaneous
(%)
0: Inactive
1: Network Determination
2: Pilot Acquisition
3: Sync
143
IE Name
Range/Unit
Arg
EV-DO PER
Long (%)
0 ... 100
%
EV-DO PER
Short (%)
0 ... 100
%
EV-DO Power
Ratio ACK
Pilot
20 ... 20
dB
EV-DO Power
Ratio Aux Pilot
20 ... 20
dB
EV-DO Power
Ratio Data
Pilot
20 ... 20
dB
EV-DO Power
Ratio DRC
Pilot
20 ... 20
dB
EV-DO Power
Ratio RRI Pilot
20 ... 20
dB
EV-DO
Reverse Rate
AN Limit
0 ... 1800
kbit/s
EV-DO
Reverse Rate
Average
(kbit/s)
0 ... 1800
kbit/s
EV-DO
Reverse Rate
Current (kbit/s)
0 ... 1800
kbit/s
EV-DO
Reverse Rate
PA Limit
0 ... 1800
kbit/s
Text
EV-DO
Revision
144
Description
IE Name
EV-DO RL IEs:
General
remark
Range/Unit
Arg
Description
EV-DO RL
Max Traffic To
Pilot
20 ... 20
dB
EV-DO RL
Packet Count
(Total)
0 ... 231 1
1 ... 5
EV-DO RL
Packet Rate
0 ... 100
%
1 ... 5
EV-DO RL
Packet Size
Text
1 ... 5
EV-DO RL
Throughput
(kbit/s)
0 ... 1800
kbit/s
EV-DO RLP
RX Duplicate
Bytes
0 ... 232 1
EV-DO Route
Update State
(Num)
0 ... 4
EV-DO Route
Update State
(Text)
Text
0 ... 100
%
EV-DO
Session
Failure Rate
(%)
0: Inactive
1: Idle
2: Connection Setup
3: Connected
4: Synchronize Connection Setup
145
IE Name
Range/Unit
Arg
EV-DO
Session Full
UATI
Text
EV-DO
Session RATI
0 ... 255
0 ... 1
EV-DO
Session Result
Description
0: Failure
1: Success
EV-DO
Session State
(Num)
0 ... 5
EV-DO
Session State
(Text)
Text
EV-DO
Session
Transaction ID
0 ... 255
EV-DO
Session UATI
Color Code
0 ... 255
EV-DO UATI
(Hex)
Text:
0000 ...
FFFF
1 ... 8
0: Closed
1: AMP setup
2: AT-initiated negotiation
3: AN-initiated negotiation
4: Open
5: Closing
EV-DO UATI
(Num)
146
0 ... 65535
1 ... 8
IE Name
Range/Unit
Arg
EV-DO UATI
Count
0 ... 8
F-DCCH
Bitrate (kbit/s)
0 ... 162600
kbit/s
Text
0 ... 65535
bits
F-DCCH
Frame Size
(ms)
Text
F-DCCH MUX
PDU
Text
F-DCCH Radio
Configuration
1 ... 9
FER DCCH
(%)
0 ... 100
%
0 ... 100
%
0 ... 100
%
0 ... 100
%
0 ... 100
%
F-FCH Bitrate
(kbit/s)
0 ... 162600
kbit/s
F-FCH Frame
Length (bits)
0 ... 65535
bits
F-DCCH
Enabled
F-DCCH
Frame Length
(bits)
Description
147
IE Name
Range/Unit
Arg
Description
F-FCH Frame
Size (ms)
Text
F-FCH MUX
PDU
Text
F-FCH Radio
Configuration
1 ... 9
F-FCH Rate
0 ... 15
F-FCH Traffic
Type (Num)
0 ... 2
F-FCH Traffic
Type (Text)
Text
Finger IEs:
General
remark
Finger Count
0 ... 12
Finger Delay
Delta (chips)
2 ... 512
chips
1 ... 12
Finger Delta
(ms)
0 ... 65535
ms
1 ... 12
Finger Energy
(dB)
32 ... 15
dB
1 ... 12
Finger Energy
Sum (dB)
64 ... 10
dB
148
IE Name
Range/Unit
Arg
Finger Pilot PN
0 ... 511
1 ... 12
Finger
Reference
1 ... 12
Finger RTC
Offset (1/8
chip)
0 ... 232 1
chip/8
1 ... 12
Finger Status
Text
1 ... 12
Firmware
Version
Text
FPC F-DCCH
Setpoint Avg
0 ... 255
dB/8
FPC F-FCH
Setpoint Avg
0 ... 255
dB/8
FPC F-SCH0
Setpoint Avg
0 ... 255
dB/8
Frame Offset
0 ... 15
See
Description
Frequent AQM
elements
F-SCH Rate
Description
Pilot PN for each finger.
Index of the earliest finger.
149
IE Name
Range/Unit
Arg
Description
F-SCH0
Bitrate (kbit/s)
0 ... 162600
kbit/s
Text
F-SCH0
Frame Length
(bits)
0 ... 65535
bits
F-SCH0 MUX
PDU
Text
F-SCH0 Radio
Configuration
1 ... 9
Hardware
Text
Device model.
Hardware ID
Text
Heading (deg)
0 ... 360
degrees
Latitude
90 ... 90
degrees
Text
Longitude
Longitude
(Text)
Text
F-SCH0
Enabled
Latitude (Text)
Missing
Neighbor IEs:
General
remark
Missing
Neighbor Cell
Name
150
1 ... 40
IE Name
Range/Unit
Arg
Description
Missing
Neighbor Ec/Io
32 ... 0
dB
1 ... 40
Missing
Neighbor PN
0 ... 511
1 ... 40
Mobile Identity
Number
Text
Mode
Text
Mode (Num)
1 ... 7
1: No service
2: Idle mode
3: Dedicated mode
(4: Limited service mode)
(5: Scan mode)
6: Packet mode
(7: Packet Idle mode)
Mode - System
1 ... 8
Relevant values:
3: CDMA (1x)
4: 1xEV-DO
5: Analog
Mode - System
(Text)
Text
MSM Revision
Text
Neighbor Set
IEs: General
remark
Neighbor Set
Band Class
Text
1 ... 40
Neighbor Set
Cell Name
Text
1 ... 40
151
IE Name
Range/Unit
Arg
Neighbor Set
Channel
0 ... 1199
1 ... 40
Neighbor Set
Count
0 ... 40
Neighbor Set
Ec
157 ... 10
dBm
1 ... 40
Neighbor Set
Ec/Io
32 ... 0
dB
1 ... 40
Neighbor Set
PN
0 ... 511
1 ... 40
Network ID
0 ... 65535
Network ID
(Hex)
Text:
0000 ...
FFFF
0 ... 15
Number Of
DSC Channels
PESQ
elements
Pilot PN
Increment
Description
Channel number of RF channel used
by each neighbor set member.
The number of neighbor set members.
Text
1 ... 52
Text
1 ... 52
152
Text
1 ... 52
IE Name
Range/Unit
Arg
0 ... 1199
1 ... 52
0 ... 52
157 ... 10
dBm
1 ... 52
32 ... 0
dB
1 ... 52
Pilot Set PN
0 ... 511
1 ... 52
Pilot Set
Channel
Pilot Set Count
Pilot Set Ec
Polluters IEs:
General
remark
Polluters
Current Active
Set
Description
Channel number of RF channel used
by each pilot.
Total number of pilots in active,
candidate, and neighbor sets.
Current refers to the polluter data derived from the latest scan
report.
1 ... 6
Polluters
Current Cell
Name
Text
Polluters
Current Ec/Io
32 ... 0
dB
1 ... 5
1 ... 5
Polluters
Current Pilot
PN
Polluters Top
List Cell Name
0 ... 511
1 ... 5
Text
1 ... 5
153
IE Name
Polluters Top
List Channel
Range/Unit
Arg
Description
0 ... 1199
1 ... 5
Polluters Top
List Pilot PN
0 ... 511
1 ... 5
Protocol
Revision Base (Num)
0 ... 7
Protocol
Revision Base (Text)
Text
Protocol
Revision Mobile (Num)
0 ... 7
Protocol
Revision Mobile (Text)
Text
Protocol
Revision In
Use (Num)
0 ... 7
Protocol
Revision In
Use (Text)
Text
0 ... 162600
kbit/s
Text
R-DCCH
Frame Length
(bits)
0 ... 65535
bits
R-DCCH MUX
PDU
Text
R-DCCH
Bitrate (kbit/s)
R-DCCH
Enabled
154
IE Name
R-DCCH
Radio
Configuration
RF Mode
Range/Unit
Arg
Description
1 ... 9
Text
<technology> is one of
Analog and CDMA, and
RF Mode
(Num)
0 ... 13
R-FCH Bitrate
(kbit/s)
0 ... 162600
kbit/s
R-FCH Frame
Length (bits)
0 ... 65535
bits
Text
R-FCH MUX
PDU
155
IE Name
Range/Unit
Arg
Description
R-FCH Radio
Configuration
1 ... 9
R-FCH Rate
0 ... 15
R-FCH Traffic
Type (Num)
0 ... 2
R-FCH Traffic
Type (Text)
Text
RLP DL Avg.
Throughput
(kbit/s)
0 ... 4000
kbit/s
RLP DL
Throughput
(kbit/s)
0 ... 4000
kbit/s
RLP Erasure
Rate (%)
0 ... 100
%
RLP
Retransmitted
Frames Rx (%)
0 ... 100
%
RLP
Retransmitted
Frames Tx (%)
0 ... 100
%
156
IE Name
RLP Rx
Channel Rate
(kbit/s)
Range/Unit
Arg
Description
0 ... 162600
kbit/s
0 ... 12
RLP Total
Bytes Rx
0 ... 231
bytes
RLP Total
Bytes Tx
0 ... 231
bytes
RLP Tx
Channel Rate
(kbit/s)
0 ... 162600
kbit/s
0 ... 12
RLP UL Avg.
Throughput
(kbit/s)
0 ... 2000
kbit/s
RLP UL
Throughput
(kbit/s)
0 ... 2000
kbit/s
R-SCH Rate
0 ... 5
0: 1X
1: 2X
2: 4X
3: 8X
4: 16X
5: 32X
157
IE Name
Range/Unit
Arg
R-SCH0
Bitrate (kbit/s)
0 ... 162600
kbit/s
Text
R-SCH0
Frame Length
(bits)
0 ... 65535
bits
R-SCH0 MUX
PDU
Text
R-SCH0 Radio
Configuration
1 ... 9
120 ... 10
dBm
R-SCH0
Enabled
Rx Power
Scanned 1st
Freq.
elements
Description
Scanned 1st
Freq. Band
Text
Scanned 1st
Freq. Cell
Name
Text
1 ... 512
Scanned 1st
Freq. Channel
0 ... 1199
Scanned 1st
Freq. Delay
3 ... 60
chips
1 ... 512
Scanned 1st
Freq. Delay
Spread
0 ... 63
chips
1 ... 512
Scanned 1st
Freq. Ec
157 ... 10
dBm
1 ... 512
158
IE Name
Range/Unit
Arg
Description
Scanned 1st
Freq. Ec/Io
32 ... 0
dB
1 ... 512
Scanned 1st
Freq. Io
125 ... 25
dBm
Scanned 1st
Freq. Pilot PN
0 ... 511
1 ... 512
Scanned 1st
Freq. Pilots
Count
0 ... 512
Scanned 1st
Freq.
Strongest
elements
Scanned 2nd
(etc.) Freq.
elements
Scanned 2nd
(etc.) Freq.
Strongest
elements
Scanned
Channel
Argument (1 ... 32): 1 means the pilot with highest peak Ec/Io,
etc.
Argument (1 ... 32): 1 means the pilot with highest peak Ec/Io,
etc.
0 ... 1199
1 ... 512
Scanned
Channels
Count
Scanned RSSI
0 ... 512
120 ... 30
dBm
1 ... 512
Scanned RSSI
Average (dBm)
120 ... 30
dBm
159
IE Name
Scanned
Strongest
elements
Range/Unit
Arg
Description
Searcher State
Searcher
Window A
Text
0 ... 15
See
Description
Searcher
Window N
0 ... 15
Searcher
Window R
0 ... 15
Sector ID
Text
Service ID
0 ... 254
Service Option
(Num)
0 ... 65535
Service Option
(Text)
Text
0 ... 7
Text
Slot Cycle
Index
Soft Handoff
State
160
IE Name
Spectr Ana
IEs: General
remark
Range/Unit
Arg
Spectr Ana Sc
DL Freq
1 ...
2560
Spectr Ana Sc
DL No Of Freq
0 ... 2560
Spectr Ana Sc
DL RSSI
130 ... 20
dBm
1 ...
2560
0 ... 800
ms
Speech Path
Delay
Description
Speed (km/h)
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 160
mph
Speed in mph.
1 ... 5
MOS
Station Class
Mark (hex)
Text
Subnet Mask
0 ... 255
System ID
0 ... 65535
System ID
(Hex)
Text
(0000 ...
FFFF)
SQI MOS
161
IE Name
Range/Unit
Arg
Description
T-Add (dB)
32 ... 0
dB
T-Add (Num)
63 ... 0
See
Description
T-Comp (dB)
0 ... 8
dB
T-Comp (Num)
0 ... 15
See
Description
T-Drop (dB)
32 ... 0
dB
T-Drop (Num)
63 ... 0
Text
(0.1 s...
319 s)
Tx Open Loop
Power
127 ... 36
dBm
Tx Pilot Power
127 ... 36
dBm
See
Description
T-TDrop (Num)
0 ... 15
See
Description
T-TDrop (sec)
Tx Adjust
162
IE Name
Tx Power
3.6.
Range/Unit
Arg
127 ... 36
dBm
Description
Tx Power parameter.
Valid for both 1x and EV-DO.
IE Name
Range/Unit
Arg
RSSI
128 ... 10
dBm
SQE
0 ... 100
dB
Description
163
3.7.
Notes on CINR
The number of samples on which to base the CINR mean values and
standard deviations is set in the WiMAX scan setup dialog (DC UM section
14.3.1, Number of Samples for Stats). However, this figure only serves as a
guideline to the scanner; in practice the scanner may on some occasions use
a lower number of samples as input to the statistics calculation. This number
is reported in the Samples Taken elements (see below).
Note that as power level fluctuations become minute, the standard deviation
likewise approaches zero and hence tends towards negative infinity when
expressed in dB. A large negative number has been used as the lower
endpoint for the standard deviation range.
Information Element Table
IE Name
Range/Unit
Arg
1312 ...
29028
ft
400 ...
8848
m
Firmware
Version
Text
Hardware
Text
Scanner model.
Hardware ID
Text
Heading (deg)
0 ... 360
degrees
Latitude
90 ... 90
degrees
Text
Altitude (ft)
Altitude (m)
Latitude (Text)
164
Description
Height above sea level in feet.
Reported by positioning equipment.
Height above sea level in meters.
Reported by positioning equipment.
IE Name
Range/Unit
Arg
Longitude
Longitude
(Text)
Text
Mode
Text
Not used.
Mode (Num)
1 ... 7
Not used.
Mode - System
1 ... 8
Not used.
Mode - System
(Text)
Text
Not used.
Sc Channel
IEs: General
remark
Description
Sc Channel
[indx]
0 ... 1580
0 ...
1499
Sc Channel
Count
0 ... 1500
Sc Channel
Profile (Text)
[indx]
Text
0 ...
1499
Sc Channel
RSSI (dBm)
[indx]
140 ... 20
dBm
0 ...
1499
Sc Channel
RSSI Mean
(dBm) [indx]
140 ... 20
dBm
0 ...
1499
0 ... 32
0 ...
1499
Sc Channel
RSSI Samples
Taken [indx]
165
IE Name
Range/Unit
Arg
Sc Channel
RSSI Std. Dev.
(dB) [indx]
200 ... 20
dB
0 ...
1499
Sc Channel
Segment 0
Power (dBm)
[indx]
140 ... 20
dBm
0 ...
1499
Sc Channel
Segment 1
Power (dBm)
[indx]
140 ... 20
dBm
0 ...
1499
Sc Channel
Segment 2
Power (dBm)
[indx]
140 ... 20
dBm
0 ...
1499
Sc Preamble
IEs: General
remark
Description
Sc Preamble
Center
Frequency
Offset (Hz)
[indx]
10000 ...
10000
Hz
0 ... 99
Sc Preamble
Cha-PI (Text)
[indx]
Text
0 ... 99
Sc Preamble
Channel [indx]
0 ... 1580
0 ... 99
Sc Preamble
CINR (dB)
[indx]
37 ... 60
dB
0 ... 99
Sc Preamble
CINR Mean
(dB) [indx]
37 ... 60
dB
0 ... 99
166
IE Name
Range/Unit
Arg
Sc Preamble
CINR Samples
Taken [indx]
0 ... 32
0 ... 99
Sc Preamble
CINR Std. Dev.
(dB) [indx]
100 ... 60
dB
0 ... 99
Sc Preamble
Count
0 ... 100
Sc Preamble
Index [indx]
0 ... 113
0 ... 99
Sc Preamble
Operator ID
[indx]
Text
0 ... 99
Sc Preamble
Power (dBm)
[indx]
140 ... 20
dBm
0 ... 99
Sc Preamble
Profile (Text)
[indx]
Text
0 ... 99
Sc Preamble
Sector ID [indx]
Text
0 ... 99
Sc Preamble
Segment Index
[indx]
0 ... 2
0 ... 99
Sc RSSI IEs:
General
remark
Sc RSSI (dBm)
Sc RSSI
Bandwidth
(kHz)
Description
0 ...
1499
Text
167
IE Name
Range/Unit
Arg
Description
Sc RSSI
Channel
0 ... 1580
0 ...
1499
Sc RSSI
Channel Count
0 ... 1500
Sc RSSI
Frequency
(MHz)
0 ... 6000
MHz
0 ...
1499
Text
0 ...
1499
Sc RSSI Profile
(Text)
Sc Strongest
Channel IEs:
General
remark
Sc Strongest
Channel
1 ... 32
RF channel number.
Sc Strongest
Channel Profile
(Text)
Text
1 ... 32
WiMAX RF Profile.
Sc Strongest
Channel RSSI
(dBm)
140 ... 20
dBm
1 ... 32
Channel RSSI.
Sc Strongest
Channel RSSI
Mean (dBm)
140 ... 20
dBm
1 ... 32
Sc Strongest
Channel RSSI
Samples Taken
140 ... 20
dBm
1 ... 32
Sc Strongest
Channel RSSI
Std. Dev. (dB)
200 ... 20
dB
1 ... 32
Sc Strongest
Channel
Segment 0
Power (dBm)
140 ... 20
dBm
1 ... 32
168
IE Name
Range/Unit
Arg
Sc Strongest
Channel
Segment 1
Power (dBm)
140 ... 20
dBm
1 ... 32
Sc Strongest
Channel
Segment 2
Power (dBm)
140 ... 20
dBm
1 ... 32
Sc Strongest
(CINR) IEs:
General
remark
Description
1 ... 32
Sc Strongest
(CINR)
Channel
0 ... 1580
1 ... 32
RF channel number.
Sc Strongest
(CINR) CINR
37 ... 60
dB
1 ... 32
CINR.
Sc Strongest
(CINR)
Preamble
Index
0 ... 113
1 ... 32
Preamble index.
Sc Strongest
(CINR) Cha-PI
(Text)
Sc Strongest
RSSI IEs:
General
remark
Sc Strongest
RSSI (dBm)
140 ... 20
dBm
1 ... 32
Sc Strongest
RSSI Channel
0 ... 1580
1 ... 32
Sc Strongest
RSSI
Frequency
(MHz)
0 ... 6000
MHz
1 ... 32
169
IE Name
Sc Strongest
RSSI Profile
(Text)
Sc Strongest
(Preamble
Power) IEs:
General
remark
Range/Unit
Arg
Text
1 ... 32
Description
RF Profile to which each RSSI
scanned channel belongs.
Text
1 ... 32
Sc Strongest
(Preamble
Power)
Channel
0 ... 1580
1 ... 32
RF channel number.
Sc Strongest
(Preamble
Power) CINR
37 ... 60
dB
1 ... 32
CINR.
Sc Strongest
(Preamble
Power)
Preamble
Index
0 ... 113
1 ... 32
Preamble index.
Sc Strongest
(Preamble
Power) Cha-PI
(Text)
Spectr Ana
IEs: General
remark
Spectr Ana Sc
DL Freq (MHz)
0 ... 6 106
MHz
1 ...
3001
Spectr Ana Sc
DL No Of Freq
0 ... 3001
Spectr Ana Sc
DL RSSI (dBm)
140 ... 20
dBm
1 ...
3001
170
IE Name
Range/Unit
Arg
Speed (km/h)
0 ... 250
km/h
Speed in km/h.
Speed (mph)
0 ... 160
mph
Speed in mph.
Text
0 ...
86400000
ms
Time
Time (ms)
Description
171
3.8.
This section lists the information elements in the Data category, i.e. those
obtained when performing data service testing. The Data category contains
two kinds of elements:
Range/Unit
Arg
App. Bytes
Received
0 ... 2 109
bytes
App. Bytes
Sent
0 ... 2 109
bytes
App.
Throughput DL
(kbit/s)
0 ... 80000
kbit/s
App.
Throughput UL
(kbit/s)
0 ... 80000
kbit/s
172
Description
IE Name
Range/Unit
Arg
Connection
Duration
Text
hh:mm:ss
Data
Connection
Type
Text
IP Address
Text
NDIS/RAS
IEs: General
remark
Description
NDIS/RAS
Bytes
Received
0 ... 2 109
bytes
NDIS/RAS
Bytes Sent
0 ... 2 109
bytes
NDIS/RAS
Current
Throughput DL
(kbit/s)
0 ... 80000
kbit/s
NDIS/RAS
Current
Throughput UL
(kbit/s)
0 ... 80000
kbit/s
Packets
Received Per
Second
0 ... 2 109
Packets Sent
Per Second
0 ... 2 109
Ping Delay
(ms)
0 ... 30000
ms
173
IE Name
Ping Size
(bytes)
Range/Unit
Arg
0 ... 2000
bytes
Description
Size in bytes of the packet sent with
the Ping command.
Valid only during Ping sessions.
RAS IEs:
General
remark
These elements are valid only if the device uses a RAS dial-up
connection.
RAS Alignment
Errors
0 ... 2 109
RAS Buffer
Overrun Errors
0 ... 2 109
RAS
Compression
Ratio In
0 ... 2000
RAS
Compression
Ratio Out
0 ... 2000
RAS CRC
Errors
0 ... 2 109
RAS Frames
Received
0 ... 2 109
RAS Frames
Sent
0 ... 2 109
RAS Framing
Errors
0 ... 2 109
RAS Hardware
Overrun Errors
0 ... 2 109
RAS Timeout
Errors
0 ... 2 109
Session App.
Bytes
Received
0 ... 2 109
bytes
174
IE Name
Range/Unit
Arg
Description
Session App.
Bytes Sent
0 ... 2 109
bytes
Session App.
Mean
Throughput DL
(kbit/s)
0 ... 80000
kbit/s
Session App.
Mean
Throughput UL
(kbit/s)
0 ... 80000
kbit/s
Session
Current Packet
Loss (%)
0 ... 100
%
Session
Current
Throughput DL
(kbit/s)
0 ... 80000
kbit/s
Session
Current
Throughput UL
(kbit/s)
0 ... 80000
kbit/s
Session
Duration
Text
hh:mm:ss
Session
Information
Text
VSQI
Intermediate
Score
1 ... 5
MOS
175
IE Name
Range/Unit
Arg
Description
VSQI Realtime
Score
1 ... 5
MOS
3.9.
This section lists the information elements in the GSM Uplink category, i.e.
those originating from MTR files. These information elements are found only
in Data Collection.
The GSM Uplink category includes further elements besides those listed,
including RxLev and RxQual (Full and Sub) for both uplink and downlink. All
such elements have precisely the same ranges and meanings as the
corresponding elements in section 3.1, and so they have been omitted here.
No uplink information elements are valid when running GPRS/EGPRS.
No uplink data can be recorded in MTR files when running a data service.
Information Element Table
IE Name
Range/Unit
Arg
Text
DTX DL Used
Text: YES
or NO
DTX UL Used
Text: YES
or NO
Neighbor CI
0 ... 65535
1 ... 6
BCCH
Allocation
Used
Description
176
IE Name
Neighbor
Ranking Type
Range/Unit
Arg
Text
1 ... 6
Description
Indicates the algorithm used to
compute the ranking value. One of
Undefined
K-value
L-value
1 ... 6
47 ... 190
dB
47 ... 190
dB
0 ... 15
Power Level
BS
Power Level
MS
Power Level
MS (dBm)
See
Description
0 ... 31
See
Description
0 ... 31
dBm
177
IE Name
Range/Unit
Arg
SQI
40 ... 50
dBQ
TA Actual
0 ... 219
See
Description
178
Description
4.
Information Elements in
Route Analysis
4.1.
IE Name
Altitude
Range/Unit
Arg
400 ...
8848
m
Description
Height above sea level.
Unit: Meters or feet.
or
1312 ...
29028
ft
Firmware
Version
Text
Hardware
Text
Device model.
Hardware ID
Text
0 ... 360
degrees
IMEI
Text
Latitude
Text
Heading
179
IE Name
Longitude
Mode
Range/Unit
Arg
Description
Text
1 ... 7
1: No service
2: Idle mode
3: Dedicated mode
4: Limited service mode
5: Scan mode
6: Packet mode
7: Packet Idle mode
1: WCDMA
2: GSM
3: CDMA (1x)
4: 1xEV-DO
5: Analog
6: WiMAX
7: LTE
8: TD-SCDMA
Speed of vehicle.
or Text
Mode - System
1 ... 8
or Text
Speed
0 ... 250
km/h
or
0 ... 155
mph
Time
180
Text
4.2.
If nothing is written in the asterisk column, the element is always valid and is
reported by all supported phones.
Code
Meaning
g+
181
Code
h+
Meaning
The element is richer if frequency hopping is used.
If frequency hopping is used, the element covers all channels in
the hopping list.
Example: C/I.
hc+
hs
hs+
hs
182
4.2.1.
GAN
IE Name
GA-RC/GACSR State
Range/Unit
Arg
1 ... 4
or Text
Description
State of GA-RC or GA-CSR
protocol.
1: GA-RC Deregistered
2: GA-RC Registered
3: GA-CSR Idle
4: GA-CSR Dedicated
GAN Access
Point MAC
Address
Text
GAN Access
Point SSID
Text
GAN GERAN
Cell Id
0 ... 65535
GAN GERAN
LAC
0 ... 65535
GAN GERAN
MCC
183
IE Name
GAN GERAN
MNC
GAN GSM
Coverage
Indicator
Range/Unit
Arg
0 ... 3
or Text
Description
0: Normal service
1: Limited service
2: Phone has not found GERAN
coverage
3: Phone has found GERAN
coverage, service state
unknown
GAN Redirect
Counter
0 ... 255
GAN WLAN
Quality Level
0 ... 5
GAN WLAN
RSSI
or Text
0: Unusable
1: Poor
2: Adequate
3: Good
4: Excellent
5: Not applicable
254 ... 0
dBm
GANC IP
Address
Text
GANC SGW IP
Address
Text
184
IE Name
Range/Unit
Preferred GAN
Mode
0, 2
Arg
Description
Indicates whether a selection
has been made on the GAN
Mode Selection tab of the
phones property page. (At the
outset no option is selected.)
See DC UM section 16.4.2.5.
0: No
2: Yes
4.2.2.
GPRS/EGPRS
4.2.2.1.
Channel
Range/Unit
Arg
Description
C32
Cell EGPRS
Support
Text:
Yes/No
EGPRS supported/not
supported in the cell. This
information is available also to
non-EGPRS phones.
Cell GPRS
Support
Text:
Yes/No
64 ... 1024
RLC blocks
EGPRS
Window Size
DL
185
IE Name
Range/Unit
Arg
64 ... 1024
RLC blocks
GMM State
Text
GRR State
Text
LLC Window
Size DL
1 ... 255
LLC blocks
LLC Window
Size UL
1 ... 255
LLC blocks
Network
Control Order
Text
EGPRS
Window Size
UL
Description
EGPRS retransmission buffer
size on uplink (RLC protocol
level).
Network Mode
of Operation
Text
Number of
Used Timeslots
DL
186
0 ... 8
g
hs
IE Name
Range/Unit
Arg
Number of
Used Timeslots
UL
0 ... 8
g
hs
PBCCH
Timeslot
0 ... 7
Text
1 ... 11
PDP Access
Point Name
Description
Text
1 ... 11
PDP Context
Activation Time
0 ... 60000
ms
PDP Contexts
Active
0 ... 11
Text
1 ... 11
PDP Delay
Class
3 ... 11
1 ... 11
PDP Mean
Throughput
Text
1 ... 11
PDP NSAPI
5 ... 15
1 ... 11
PDP Peak
Throughput
Text
1 ... 11
187
IE Name
Range/Unit
Arg
Description
PDP
Precedence
Class
Text
1 ... 11
PDP Radio
Priority
Text
PDP Reliability
Class
Text
1 ... 11
TFI DL
0 ... 31
TFI UL
0 ... 31
Text
0 ... 7
g
hs
Timeslot
Channel Type
DL
Text
0 ... 7
g
hs
Timeslot Used
DL
Text
Timeslot Used
UL
Text
TLLI
188
Text
(dec or hex
format)
0 ... 7
0 ... 7
g
hs
g
hs
IE Name
UL State Flag
Range/Unit
Arg
Description
0 ... 7
0 ... 7
4.2.2.2.
Measurement
Range/Unit
Arg
Attach Time
0 ... 60000
ms
0 ... 63
GSM RxLev
units
Text
C Value
Coding
Scheme DL
Description
Time from Attach Request to
Attach Complete.
Normalized signal level
received at the MS
(normalization with running
average filter).
189
IE Name
Range/Unit
Arg
Coding
Scheme DL
Usage (Own
Data)
0 ... 100
%
1 ... 4
Coding
Scheme DL
Usage (Total)
0 ... 100
%
Description
Distribution of coding scheme
usage on downlink (for own
data only).
Argument: 1 means CS-1, etc.
1 ... 4
Coding
Scheme UL
Text
CS-n DL
Usage (Own
Data) (%),
n = 1 ... 4
0 ... 100
%
0 ... 7
Current CS DL
1 ... 4
Current CS UL
1 ... 4
Current MCS
DL
1 ... 9
Current MCS
UL
1 ... 9
EGPRS BEP
(Mean)
0 ... 31
See
Description
190
IE Name
EGPRS BEP
(Variance)
Range/Unit
Arg
0 ... 7
See
Description
Description
Variance of bit error probability
as reported in the Layer 3
message EGPRS Packet
Downlink Ack/Nack.
Coded according to the table in
3GPP 45.008, section 8.2.5.
EGPRS BEP
Total (Mean)
0 ... 31
See
Description
EGPRS BEP
Total (Variance)
0 ... 7
See
Description
EGPRS Link
Quality Control
UL
Text
MCS DL Usage
(Own Data)
0 ... 100
%
0 ... 7;
1 ... 9
Distribution of modulation
coding scheme usage (on
downlink and for own data only)
for each timeslot.
Argument 1: Timeslot
sequence number.
Argument 2: Modulation
coding scheme index.
Modulation DL
Text
Type of modulation on
downlink.
Modulation UL
Text
191
IE Name
PDCH
Utilization
Control DL
Range/Unit
Arg
Description
0 ... 100
%
0 ... 7
PDCH
Utilization
Control UL
0 ... 100
%
0 ... 7
PDCH
Utilization Free
Data UL
0 ... 100
%
0 ... 7
PDCH
Utilization
Other Data DL
0 ... 100
%
0 ... 7
PDCH
Utilization Own
Data DL
0 ... 100
%
0 ... 7
PDCH
Utilization Own
Data UL
0 ... 100
%
0 ... 7
192
IE Name
Range/Unit
Arg
10 ... 100
GSM RxLev
units
Range/Unit
Arg
Text
LLC BLER DL
0 ... 100
%
LLC BLER UL
0 ... 100
%
LLC Bytes
Received DL
0 ... 2 109
bytes
0 ... 2 109
bytes
LLC
Throughput DL
0 ... 400
kbit/s
LLC
Throughput UL
0 ... 400
kbit/s
RLA_P
Description
Received Level Average
(GPRS signal strength
measure).
or
120 ... 10
dBm
4.2.3.
IE Name
Data Mode
Description
Indicates whether the data
transfer is performed over
EGPRS, GPRS, or circuitswitched.
193
IE Name
Range/Unit
Arg
Description
RLC BLER DL
0 ... 100
%
RLC BLER UL
0 ... 100
%
RLC Bytes
Received DL
0 ... 2 109
bytes
RLC Bytes
Sent UL
0 ... 2 109
bytes
0 ... 400
kbit/s
0 ... 100
%
0 ... 400
kbit/s
0 ... 100
%
RLP BLER DL
0 ... 100
%
hs
RLP BLER UL
0 ... 100
%
hs
RLC
Throughput DL
RLC
Throughput UL
194
IE Name
Range/Unit
Arg
Description
RLP Bytes
Received DL
0 ... 2 109
bytes
hs
RLP Bytes
Sent UL
0 ... 2 109
bytes
hs
0 ... 60
kbit/s
hs
0 ... 100
%
hs
0 ... 60
kbit/s
hs
0 ... 100
%
hs
SNDCP BLER
DL
0 ... 100
%
SNDCP BLER
UL
0 ... 100
%
SNDCP Bytes
Received DL
0 ... 2 109
bytes
RLP
Throughput DL
RLP
Throughput UL
195
IE Name
Range/Unit
Arg
SNDCP Bytes
Sent UL
0 ... 2 109
bytes
SNDCP
Throughput DL
0 ... 400
kbit/s
SNDCP
Throughput UL
0 ... 400
kbit/s
4.2.4.
Description
MS Behavior
Range/Unit
Arg
Adjacent Scan
0, 2
Description
Use of C/A measurements in
phone. See DC UM section
16.2.4.4.
0: Not activated
2: Activated
Band Control
0, 2
Disable
Handover
196
0, 2
IE Name
Forced GPRS
Class
Range/Unit
Arg
0, 2
Description
Use of GPRS class forcing
function in phone.
0: Not activated
2: Activated
Not supported by any currently
connectable phones; see
section 5.2 for details.
Forced
Multislot Class
0, 2
Forced Power
Class
0, 2
Forced Quality
of Service
0, 2
Idle Channel
Quality
0, 2
197
IE Name
Ignore Cell
Barred
Range/Unit
Arg
0, 2
Description
Use of ignore/reverse cell
barred function in phone. See
DC UM sections 16.2.4.5,
16.3.2.3, 16.4.1.3, 16.4.2.2.
0: Not activated
2: Activated
MS Behavior
Modified
Text: B,
C, G,
or a
combination
of these
letters, or
empty string
Multiband
Reporting
198
0, 2
IE Name
Prevent
Handover List
Active
Range/Unit
Arg
0, 2
Description
Use of prevent handover
function in phone (handover to
certain cells prevented in
dedicated mode). See DC UM
section 16.2.4.8.
0: Not activated
2: Activated
Serving Cell
List Active
0, 1, 2
Target
Handover
0, 1, 2
4.2.5.
Neighbors
All these elements have attributes which specify different sorting orders:
199
IE Name
Range/Unit
Arg
See ARFCN
BCCH,
section
4.2.8.1
1 ... 32
00 ... 77
(octal)
or Text
1 ... 32
Neighbor C1
1 ... 32
Neighbor C2
1 ... 32
Neighbor C31
1 ... 32
Neighbor C32
1 ... 32
Neighbor Cell
Id
0 ... 65535
(dec)
1 ... 32
Neighbor
ARFCN
Neighbor BSIC
Description
or
Text (hex)
Neighbor Cell
Name
200
Text
1 ... 32
IE Name
Neighbor Cell
Name
Algorithm
Range/Unit
Arg
Description
1 ... 6
1 ... 32
Neighbor LAC
0 ... 65535
or
1 ... 32
Text (hex)
201
IE Name
Neighbor
RxLev
Range/Unit
Arg
Description
10 ... 100
GSM RxLev
units
1 ... 32
or
120 ... 10
dBm
Neighbor (SI)
ARFCN
Text
4.2.6.
Quality Measurement
The Frequent AQM elements, uplink and downlink scores, only appear in
merged logfiles (see RA UM section 17.2).
Uplink PESQ scores likewise only appear in merged logfiles.
Downlink PESQ scores, as well as the remaining AQM measurements (all
other elements prefixed with PESQ below), appear in merged as well as
unmerged logfiles. However, prior to merging, all such data lags behind other
data in the logfile. See RA UM section 17.2.2.
202
IE Name
AMR Active
Set DL
Range/Unit
Arg
Text
0 ... 3
Description
Current active set of AMR
speech codecs on downlink,
each codec being described by
a text string, e.g. 12.2 kbit/s
rate.
Argument: 0 gives the first
member of the active set, etc.
AMR Active
Set UL
Text
0 ... 3
AMR Codec
Call DL
0 ... 100
%
0 ... 7
AMR Codec
Call UL
0 ... 100
%
0 ... 7
203
IE Name
AMR Codec
Cell DL
Range/Unit
Arg
0 ... 100
%
0 ... 7
Description
Distribution of downlink AMR
codec usage since the phone
started using the current
serving cell.
Argument: AMR Codec Call
DL.
AMR Codec
Cell UL
0 ... 100
%
0 ... 7
AMR Codec DL
0 ... 100
%
0 ... 3
AMR Codec UL
0 ... 100
%
0 ... 3
AMR
Hysteresis
0 ... 15
1 ... 3
AMR
Threshold
0 ... 63
1 ... 3
204
IE Name
Range/Unit
Arg
Description
Frequent AQM
Score DL
1 ... 5
MOS-PESQ
Frequent AQM
Score UL
1 ... 5
MOS-PESQ
Frequent AQM
Sentence DL
0 ... 7
Frequent AQM
Sentence UL
0 ... 7
PESQ Echo
Attenuation
0 ... 100
dB
PESQ Echo
Correlation
0 ... 5
PESQ Echo
Delay
0 ... 1000
ms
PESQ Echo
Power
0 ... 100
dB
PESQ Score
DL
1 ... 5
MOS-PESQ
PESQ Score
UL
1 ... 5
MOS-PESQ
PESQ
Sentence DL
0 ... 3
205
IE Name
PESQ
Sentence UL
Range/Unit
Arg
0 ... 3
Description
AQM: Uplink PESQ sentence
index. Same meaning as PESQ
Sentence DL (which see).
PESQ Volume
100 ... 20
dB
Speech Codec
Text
0 ... 800
ms
Speech Path
Delay
20 ... 30
dBQ
206
IE Name
SQI MOS
4.2.7.
Range/Unit
Arg
Description
1 ... 5
MOS
Scan Data
For Sony Ericsson phones K600i/W600i and later, these elements are valid
when C/A measurements are activated in the phone properties. See DC UM
section 16.2.4.4.
IE Name
Scanned
Adjacent
ARFCN
Range/Unit
Arg
See ARFCN
BCCH,
section
4.2.8.1
0 ... 63
h+
Description
C/A scanning: ARFCNs of
adjacent channels.
Attributes:
See ARFCN
BCCH,
section
4.2.8.1
0 ... 63
h+
207
IE Name
Scanned
Adjacent
RxLev
Range/Unit
Arg
120 ... 10
dBm
0 ... 63
h+
Description
C/A scanning: Scanned signal
strength of adjacent channels.
Attributes:
120 ... 10
dBm
0 ... 63
h+
Scanned
ARFCN
See ARFCN
BCCH,
section
4.2.8.1
0 ... 846
208
IE Name
Range/Unit
Arg
Scanned Band
Text
0 ... 846
Description
Frequency bands of scanned
channels.
Attributes, Argument: Works
as for Scanned ARFCN.
Scanned BSIC
Scanned BSIC
on ARFCN
Scanned Cell
Name
00 ... 77
(octal)
0 ... 846
00 ... 77
(octal)
See
range of
ARFCN
BCCH,
section
4.2.8.1
Text
0 ... 846
Scanned
Channels No of
0 ... 847
Scanned C/I
5 ... 35
dB
0 ... 846
Scanned
RxLev
10 ... 100
GSM RxLev
units
or
0 ... 846
120 ... 10
dBm
209
IE Name
Scanned
RxLev on
ARFCN
Range/Unit
Arg
10 ... 100
GSM RxLev
units
See
range of
ARFCN
BCCH,
section
4.2.8.1
or
120 ... 10
dBm
4.2.8.
Serving
4.2.8.1.
Channel
Description
Received signal strength of
scanned channels.
Argument: ARFCN.
IE Name
Range/Unit
Arg
ARFCN BCCH
GSM 850:
128 ... 251
P-GSM 900:
1 ... 124
Description
E-GSM 900:
0 ... 124,
975 ... 1023
GSM 1800:
512 ... 885
GSM 1900:
512 ... 810
ARFCN
Current
See ARFCN
BCCH
See ARFCN
BCCH
210
IE Name
BSIC
Range/Unit
Arg
Description
Text
Cell Identity.
or
00 ... 77
(octal)
Cell Id
0 ... 65535
or
Text (hex)
Cell Name
Text
Cell Name
Algorithm
1 ... 3
CGI
Text
or
Text (hex)
(LAC and CI
given in
hexadec.)
Channel Mode
Text
211
IE Name
Range/Unit
Arg
Description
Channel Type
Text
g+
hs+
Ciphering
Algorithm
Text
Frequency
Band
Text
Frequency
Band for TCH
Text
Hopping
Text
Hopping List
Text
HSN
0 ... 63
LAC
Num:
0 ... 65535
or
Text (hex):
0000 ...
FFFF
MAIO
0 ... 63
MCC
212
IE Name
Range/Unit
Arg
Number of
Hopping
Frequencies
0 ... 64
Number of frequencies in
hopping list.
RAC
0 ... 255
MNC
Description
or
Text (hex)
Subchannel
Number
0 ... 7
Training
Sequence
Code
0 ... 7
4.2.8.2.
Interference
Range/Unit
Arg
10 ... 100
GSM RxLev
units
1 ... 4
Description
Signal strength of adjacent
channel.
Argument:
1: Serving cell 2 (400 kHz)
2: Serving cell 1 (200 kHz)
3: Serving cell +1 (+200 kHz)
4: Serving cell +2 (+400 kHz)
or
120 ... 10
dBm
5 ... 35
dB
213
IE Name
Range/Unit
Arg
5 ... 35
dB
5 ... 35
dB
C/A 3
Description
C/I elements:
General
remark
Sony Ericsson phones report C/I values for traffic channels. If the
BCCH is not used as traffic channel, the C/I Absolute element will
be invalid for the BCCH ARFCN.
Nokia phones report a single C/I value which is associated with
the BCCH in the presentation.
See also notes on individual elements below.
214
IE Name
C/I
Range/Unit
Arg
Description
5 ... 35
dB
0 ... 511
(8641)
g+
hs+
h+
C/I Absolute
C/I ARFCN
5 ... 35
dB
See
range of
ARFCN
BCCH,
section
4.2.8.1
See ARFCN
BCCH,
section
4.2.8.1
0 ... 511
(8641)
g+
hs+
h+
5 ... 35
dB
0 ... 7
g
hs
h+
215
IE Name
C/I Hopping
List
Range/Unit
Arg
Description
5 ... 35
dB
0 ... 63
g+
hs+
hc+
C/I Hopping
List: ARFCN
C/I on BCCH
Carrier
See ARFCN
BCCH,
section
4.2.8.1
0 ... 63
5 ... 35
dB
h+
C/I Timeslot
0 ... 7
0 ... 511
(8641)
g
hs
h+
216
IE Name
Scanned
C/A +/1
Range/Unit
Arg
0 ... 63
h+
Description
C/A scanning: C/A values
corresponding to Scanned
Adjacent RxLev with attributes
+1 and 1.
Attributes:
0 ... 63
h+
4.2.8.3.
Measurement
IE Name
Range/Unit
Arg
Description
BER Actual
0 ... 26
%
g
hs
BER/Timeslot
0 ... 26
%
0 ... 7
g
hs
217
IE Name
Range/Unit
Arg
BLER/Timeslot
0 ... 100
%
0 ... 7
g
hs
Description
Block error rate for each
timeslot used. Valid for data
services only.
Argument: 0 means the first
used timeslot (not TS 0), etc.
C1
C2
Channel RxLev
10 ... 100
GSM RxLev
units
See
range of
ARFCN
BCCH,
section
4.2.8.1
or
120 ... 10
dBm
DL Signalling
Counter
Current
0 ... 45
DL Signalling
Counter Max
0 ... 45
DTX Rate DL
0 ... 100
%
100
218
IE Name
FER Actual
Range/Unit
Arg
Description
0 ... 100
%
g
hs
FER Full
0 ... 100
%
100
MAC Mode DL
0 ... 100
%
0 ... 3
MAC Mode UL
0 ... 3
MS Power
Control Level
0 ... 31
See
Description
219
IE Name
MS Tx Power
Range/Unit
Arg
Description
GSM 850:
5 ... 39
GSM 900:
5 ... 39
GSM 1800:
0 ... 36
GSM 1900:
0 ... 33
dBm
Radio Link
Timeout
Current
0 ... 64
Radio Link
Timeout Max
4, 8, ..., 64
RxLev Full
10 ... 100
GSM RxLev
units
or
120 ... 10
dBm
RxLev Full In
Service
10 ... 100
GSM RxLev
units
or
120 ... 10
dBm
220
IE Name
RxLev Sub
Range/Unit
Arg
Description
10 ... 100
GSM RxLev
units
or
120 ... 10
dBm
RxLev Sub In
Service
10 ... 100
GSM RxLev
units
or
120 ... 10
dBm
RxQual Full
0 ... 7
(see
Description)
or
0 ... 100
%
RxQual Sub
0 ... 7
(see
Description)
or
0 ... 100
%
Signal Strength
Hopping List
120 ... 10
dBm
0 ... 63
h+
221
IE Name
Range/Unit
Arg
Signal Strength
on BCCH
Carrier
120 ... 10
dBm
Description
Signal strength on the current
BCCH. Especially useful for
obtaining a correct measure of
the cell size when frequency
hopping is used and power
control is applied to the TCHs.
The following steps are used to
find a value for the element:
1. Neighbor list. If the BCCH
frequency is in the neighbor
list, report its signal strength.
2. Hopping list. If the BCCH is
used as hopping frequency
(in dedicated mode), report
its signal strength.
3. Idle mode. If the phone is in
idle mode, report RxLev
(dBm).
If frequency hopping is not
used, step 2 becomes If BCCH
= TCH ....
Invalid if no value is found in
any of the above steps.
TA
0 ... 63
See
Description
Timeslot
222
0 ... 7
4.2.9.
WCDMA Parameters
WCDMA
Neighbor
CPICH Ec/No
WCDMA
Neighbor
RSCP
WCDMA
Neighbor SC
Range/Unit
Arg
Text
34 ... 0
dB
1 ... 32
Description
GPRS signal level criterion
governing when to search for
3G cells (e.g. Above
74 dBm, Below 54 dBm,
Always, Never). See 3GPP
45.008, section 10.4.
CPICH Ec/No of measured
WCDMA neighbors.
Argument: 1 gives the
neighbor with the highest signal
strength, etc.
140 ... 15
dBm
1 ... 32
0 ... 511
1 ... 32
WCDMA
Neighbor
UARFCN
WCDMA
Neighbors No
of
0 ... 16383
1 ... 32
(frequency
band
dependent)
0 ... 32
223
4.3.
Note that the MIMO vs. non-MIMO distinction is expressed differently in the
attributes of certain other IEs.
4.3.1.
Active Set
Range/Unit
Arg
Description
Text
1 ... 6
AS CPICH
Ec/No
34 ... 0
dB
1 ... 6
AS CPICH
RSCP
140 ... 15
dBm
1 ... 6
AS Cell Name
AS SC
224
0 ... 6
0 ... 511
1 ... 6
IE Name
AS UARFCN
DL
Range/Unit
Arg
410 ...
10850
1 ... 6
Description
Downlink UARFCN of each active set
member.
(frequency
band
dependent)
4.3.2.
Data
Range/Unit
Arg
PDP Access
Point Name
Text
1 ... 11
PDP Address
Text
1 ... 11
PDP Context
Time
0 ... 60000
ms
PDP Contexts
Active
0 ... 11
Text
1 ... 11
3 ... 11
1 ... 11
PDP Mean
Throughput
Text
1 ... 11
PDP NSAPI
5 ... 15
1 ... 11
PDP Peak
Throughput
Text
1 ... 11
PDP
Precedence
Class
Text
1 ... 11
PDP Delay
Class
PDP LLC SAPI
Description
225
IE Name
Range/Unit
Arg
PDP Radio
Priority
Text
1 ... 11
PDP Reliability
Class
Text
1 ... 11
4.3.3.
Description
Finger Info
The Rake fingers are not sorted by signal strength; they come in the order
they are reported. Rake fingers are reported separately for each UMTS
frequency.
The Motorola E1000 may report finger measurements on a number of
different channels (see the element Finger Position Type); the other devices
that support finger measurements always report them on the CPICH.
The Finger and Finger Position series of elements contain the same data.
The latter series contains arrays of size 2560 corresponding to the sequence
of chips in a radio frame timeslot, with the received finger information
positioned at the correct indices. These elements are provided for bar chart
plotting. The Finger Slot Position element is of course not needed in the
Finger Position series and is consequently absent from it.
Two arguments are used. The first represents the UMTS frequency; the
second represents either the Rake finger number (Finger series) or the chip
index (Finger Position series).
IE Name
Range/Unit
Arg
Finger Ec/No
34 ... 0
dB
1 ... 12;
1 ... 48
Finger No of
0 ... 48
1 ... 12
Finger RSCP
140 ... 15
dBm
1 ... 12;
1 ... 48
Finger RSSI
130 ... 20
dBm
1 ... 12;
1 ... 48
0 ... 511
1 ... 12;
1 ... 48
Finger SC
226
Description
IE Name
Range/Unit
Arg
Finger Slot
0 ... 15
1 ... 12;
1 ... 48
Finger Slot
Position
1 ... 2560
1 ... 12;
1 ... 48
Finger Type
Text
1 ... 12;
1 ... 48
0 ... 16383
1 ... 12;
1 ... 48
Finger
UARFCN
(frequency
band
dependent)
Description
Finger Position
SC
0 ... 511
1 ... 12;
1 ... 2560
Finger Position
Ec/No
34 ... 0
dB
1 ... 12;
1 ... 2560
Finger Position
RSCP
140 ... 15
dBm
1 ... 12;
1 ... 2560
Finger Position
RSSI
130 ... 20
dBm
1 ... 12;
1 ... 2560
Finger Position
Slot
0 ... 15
1 ... 12;
1 ... 2560
Finger Position
Type
Text
1 ... 12;
1 ... 2560
Finger Position
UARFCN
0 ... 16383
1 ... 12;
1 ... 2560
(frequency
band
dependent)
227
4.3.4.
GSM Parameters
IE Name
Range/Unit
Arg
Description
GSM Neigh
ARFCN
See section
4.2 under
ARFCN
BCCH
1 ... 32
GSM Neigh
BSIC
Text
1 ... 32
GSM Neigh No
of
GSM Neigh
RxLev
0 ... 32
120 ... 10
dBm
1 ... 32
4.3.5.
Handover
IE Name
Compressed
Mode
HO Event Type
Range/Unit
Arg
0, 1
0 ... 6
or Text
228
Description
IE Name
Range/Unit
Arg
Inter-freq Event
Criteria
Text
1 ... 10
Description
Event criteria governing when the UE
should send inter-frequency
measurement reports.
Argument: One argument for each
event criterion.
Inter-freq Event
Name
Text
1 ... 10
Inter-RAT
Event Criteria
Text
1 ... 5
Inter-RAT
Event Name
Text
1 ... 5
Intra-freq Cells
Text
Intra-freq Event
Criteria
Text
1 ... 10
229
IE Name
Range/Unit
Arg
Description
Intra-freq Event
Name
Text
1 ... 10
SHO Event
Rate
0 ... 50
0 ...
3600
SHO Event
Success Rate
0 ... 100
%
230
IE Name
SHO Percent
Softer
Range/Unit
Arg
0 ... 100
%
Description
A measure of the amount of softer
handover. Calculated as:
# softer / (# softer + # soft)
where
softer = Radio link event indicating
success occurs while in softer
handover (and with more than one
member in active set)
soft = Radio link event indicating
success occurs while in soft handover
(and with more than one member in
active set)
A radio link event is one of Radio Link
Addition, Radio Link Removal, and
Radio Link Replacement. Regarding
the events, see section 7.2.
Requires that a cell file has been
loaded (otherwise the element is
invalid).
SHO State
Num: 0 ... 2
or Text
4.3.6.
HSDPA
The attributes for these elements have the following meanings unless
otherwise indicated:
231
IE Name
Range/Unit
Arg
Description
HS 16-QAM
Modulation
Rate
0 ... 100
%
HS 64-QAM
Modulation
Rate
0 ... 100
%
HS CQI (Max)
0 ... 30
See
Description
0 ... 30
HS CQI (Min)
0 ... 30
HS CQI
Feedback
Cycle
0 ... 255
HS CQI
Repetition
Factor
0 ... 15
HS-DSCH ACK
Rate
0 ... 100
%
HS-DSCH
BLER 1st
0 ... 100
%
HS-DSCH
BLER Residual
0 ... 100
%
232
IE Name
Range/Unit
Arg
HS-DSCH
BLER Residual
Per Process
0 ... 100
%
0 ... 16
Description
Same as HS-DSCH BLER Residual
but for each active HARQ process
separately.
Argument: HARQ process index.
HS-DSCH DTX
Rate
0 ... 100
%
HS-DSCH
Error Blocks
1st No Of
0 ... 20000
HS-DSCH
Error Blocks
Residual No Of
0 ... 20000
HS-DSCH
Error Blocks
Residual No Of
Per Process
0 ... 20000
0 ... 16
HS-DSCH
HARQ
Processes No
Of
0 ... 16
HS-DSCH
NACK Rate
0 ... 100
%
HS-DSCH New
Transmission
Rate Per
Process
0 ... 100
%
0 ... 16
HS-DSCH Post
Rate
0 ... 100
%
HS-DSCH Pre
Rate
0 ... 100
%
New transmission rate on the HSDSCH for each active HARQ process.
Argument: HARQ process index.
233
IE Name
Range/Unit
Arg
Description
HS-DSCH
Retransmission Rate
0 ... 100
%
HS-DSCH
Retransmission Rate
Per Process
0 ... 100
%
0 ... 16
HS-DSCH
Retransmissions
0 ... 20000
HS-DSCH
Throughput
0 ... 80000
kbit/s
HS H-RNTI
0 ... 65535
0 ... 100
%
1 ... 2
HS MIMO Multi
TB Rate
HS MIMO Type
0, 1
1 ... 2
or Text
HS MIMO Type
A CQI Rate
0 ... 100
%
0 ... 100
%
234
IE Name
HS-PDSCH
Code Usage
(Accu)
Range/Unit
Arg
Description
0 ... 100
%
1 ... 15
HS-PDSCH
Code Usage
(Curr)
0 ... 100
%
1 ... 15
HS Phy
Requested
Throughput
0 ... 80000
kbit/s
HS Phy
Scheduled
Throughput
0 ... 80000
kbit/s
Calculated as: (sum of TBSs for nonDTX blocks) / (total TTI time for nonDTX blocks)
Only blocks sent to this phone are
considered in the calculation, and the
CRC indication does not matter. The
element gives an estimate of the
throughput on the assumption that all
blocks were successfully transferred.
HS Phy Served
Throughput
0 ... 80000
kbit/s
235
IE Name
Range/Unit
Arg
HS Phy Served
Throughput
Per Process
0 ... 80000
kbit/s
0 ... 16
Description
Same as HS Phy Served Throughput
but for each active HARQ process
separately.
Argument: HARQ process index.
HS QPSK
Modulation
Rate
0 ... 100
%
HS-SCCH
Channelisation
Code
0 ... 31
1 ... 8
HS-SCCH
Channelisation
Codes
Text
HS-SCCH
Channelisation
Codes No Of
0 ... 8
HS-SCCH
Decode
Success Rate
0 ... 100
%
HS Serving
Cell
0 ... 511
HS Serving
Cell Name
Text
HS Session
0 ... 1
or Text
0: No
1: Yes
236
IE Name
HS Transport
Block IEs:
General
remark
HS Transport
Block Count
Range/Unit
Arg
Description
1 ... 295
0 ... 65535
1 ...
42192
HS Transport
Block Count
(Accu)
0 ... 65535
1 ... 295
HS Transport
Block Count
(Curr)
0 ... 65535
1 ... 295
HS Transport
Block Count By
Index (Accu)
0 ... 65535
1 ... 295
237
IE Name
Range/Unit
Arg
Description
HS Transport
Block Count By
Index (Curr)
0 ... 65535
1 ... 295
HS Transport
Block Size
0 ... 42192
bits
1 ... 295
HS Transport
Block Size By
Index
0 ... 42192
bits
HS Transport
Block Sizes No
Of
0 ... 295
4.3.7.
1 ... 295
Description
HSUPA
IE Name
Range/Unit
Arg
DPCCH Power
UL
50 ... 33
dBm
HS UL Average
Serving Grant
0 ... 1000
HS UL Average
Serving Grant
Index
0 ... 40
HS UL Average
TBS
0 ... 23000
bits
HS UL Average
TBS / TBS Max
E-TFCI
0 ... 100
%
238
IE Name
Range/Unit
Arg
Description
HS UL BLER
1st
0 ... 100
%
HS UL BLER
Residual
0 ... 100
%
HS UL Buffer
Limited Tx
Rate
0 ... 100
%
HS UL DTX
Rate
0 ... 100
%
HS UL E-DCH
Throughput
0 ... 80000
kbit/s
HS UL EDPCCH Power
50 ... 33
dBm
HS UL EDPDCH Power
50 ... 33
dBm
HS UL Error
Blocks No Of
0 ... 1000
HS UL Error
Blocks
Residual No Of
0 ... 1000
239
IE Name
HS UL E-TFC
Retransmissions
Range/Unit
Arg
0 ... 100
%
0 ... 127
Description
Retransmission rate for each E-TFC
(Transport Format Combination),
Attributes:
Argument: E-TFCI.
HS UL E-TFC
Usage
0 ... 100
%
0 ... 127
Argument: E-TFCI.
HS UL Happy
Rate
0 ... 100
%
HS UL HICH
ACK Rate
0 ... 100
%
HS UL HICH
NACK Rate
0 ... 100
%
HS UL New
Transmission
Rate
0 ... 100
%
HS UL NonServing Cells
No Of
0 ... 4
HS UL NonServing
Combined ERGCH Down
0 ... 100
HS UL Number
of TTIs
0 ... 100
240
IE Name
Range/Unit
Arg
Description
HS UL Power
Limited Tx
Rate
0 ... 100
%
HS UL
Retransmission Rate
0 ... 100
%
HS UL Serving
Grant Limited
Tx Rate
0 ... 100
%
HS UL
Successful EAGCH Rate
(All TTIs)
0 ... 100
%
HS UL
Successful
First Tx Rate
0 ... 100
%
HS UL
Transmission
Distribution
0 ... 100
%
1 ... 17
Argument:
1: First transmission
17: Residual
241
IE Name
HS UL UE
Transmission
Power
Headroom
4.3.8.
Range/Unit
Arg
0 ... 31
dB
Description
UE transmission power headroom,
defined as the ratio of the UE
maximum transmission power to the
current DPCCH transmission power.
See 3GPP 25.215 and 25.309.
IE Name
Range/Unit
Arg
Averaged BER
0 ... 100
%
Description
Bit error rate, measured using either
the pilot bits or the TPC bits on the
DPCCH channel (choice depends on
slot format).
Reported in Q11 format. A 100% error
figure means 2047 detected errors.
Averaged over reporting period.
DPCCH ISCP
DL
135 ... 15
dBm
DPCCH RSCP
DL
135 ... 15
dBm
Text
1 ... 4
RLC AM DL
Log Ch Type
RLC AM DL
PDU Retransm
0 ... 100
%
1 ... 4
242
IE Name
Range/Unit
Arg
RLC AM DL
PDU
Throughput
0 ... 80000
kbit/s
1 ... 4
Description
Radio Link Control PDU throughput
(Acknowledged Mode, downlink),
counting both control PDUs and AM
PDUs.
Since the PDU throughput includes
RLC headers, it will be slightly higher
than the SDU throughput where such
headers are absent.
Argument: Logical channel index.
RLC AM DL
SDU
Throughput
0 ... 80000
kbit/s
RLC AM UL
Log Ch Type
Text
1 ... 4
1 ... 4
RLC AM UL
PDU Retransm
0 ... 100
%
1 ... 4
0 ... 80000
kbit/s
1 ... 4
RLC AM UL
SDU
Throughput
0 ... 80000
kbit/s
1 ... 4
243
IE Name
Range/Unit
Arg
RLC DL Entity
Data Mode
Text:
TM, UM,
or AM
1 ... 32
Description
Downlink RLC entity data mode:
Transparent Mode, Unacknowledged
Mode, or Acknowledged Mode.
Argument: RLC entity.
RLC DL
Throughput
0 ... 80000
kbit/s
1 ... 32
RLC No of
Entities
0 ... 32
Text:
TM, UM,
or AM
1 ... 32
RLC UL Entity
Data Mode
0 ... 80000
kbit/s
1 ... 32
RLC/Trsp DL
Throughput
(Best)
0 ... 80000
kbit/s
RLC/Trsp UL
Throughput
(Best)
0 ... 80000
kbit/s
SF DL
1 ... 512
SF UL
1 ... 512
Trsp Ch BLER,
DL
0 ... 100
%
1 ... 32
244
IE Name
Range/Unit
Arg
Trsp Ch BLER,
DL (Log)
0 ... 63
1 ... 32
See
Description
Description
Block error rate on each downlink
transport channel (DCH only),
converted to logarithmic value.
Regarding the conversion, see 3GPP
25.331, section 10.3.5.10.
Argument: Transport channel index.
Note: Nokia UEs do not deliver
separate values for each transport
channel, but only an average over all
of them (arg = 1).
Trsp Ch BLER,
DL (Worst)
0 ... 100
%
Trsp Ch BLER
Target
0 ... 100
%
1 ... 32
Trsp Ch
Direction
Text:
UL or DL
1 ... 32
Trsp Ch Id
1 ... 32
1 ... 32
Trsp Ch No of
DL
0 ... 32
Trsp Ch No of
UL
0 ... 32
Trsp Ch No of
Error Blocks
0 ... 4095
1 ... 32
245
IE Name
Trsp Ch
Received
Blocks
Range/Unit
Arg
0 ... 4095
1 ... 32
Description
Number of blocks received on each
transport channel. (The number of
reports over which this is summed
varies between phones.)
Argument: Transport channel index.
Trsp Ch
Throughput DL
0 ... 80000
kbit/s
1 ... 32
Trsp Ch
Throughput DL
Total
0 ... 80000
kbit/s
Trsp Ch
Throughput UL
0 ... 80000
kbit/s
1 ... 32
Trsp Ch
Throughput UL
Total
0 ... 80000
kbit/s
Trsp Ch Type
DL
Text
Trsp Ch Type
UL
Text
1 ... 32
1 ... 32
4.3.9.
MS Behavior
IE Name
BLER Target
Control
Range/Unit
Arg
Description
Num:
0 ... 63
or Text
246
IE Name
Cell Barred
Control
MS Behavior
Modified
Range/Unit
Arg
Description
Num: 0, 1
or Text
Text: B,
C, or a
combination
of these
letters (or
empty
string)
RAT Control
Num: 0 ... 3
Sector Control
Text
Num: 0, 1
or Text
247
4.3.10.
Neighbors
IE Name
Range/Unit
Arg
Text
1 ... 6
Description
Cell name of each detected neighbor.
Requires cell file.
Argument: Neighbor identity.
Det Neigh
CPICH Ec/No
34 ... 0
dB
1 ... 6
Det Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Det Neigh
CPICH
TxPower
Det Neigh No
of Members
Det Neigh
Pathloss
31 ... 50
dBm
1 ... 6
0 ... 6
30 ... 165
dB
1 ... 6
Det Neigh SC
0 ... 511
1 ... 6
Det Neigh
UARFCN DL
0 ... 16383
1 ... 6
(frequency
band
dependent)
Text
1 ... 6
248
IE Name
Mon Neigh
CPICH Ec/No
Range/Unit
Arg
34 ... 0
dB
1 ... 6
Description
CPICH Ec/No of each monitored
neighbor.
Argument: Neighbor identity.
Mon Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Mon Neigh
CPICH
TxPower
Mon Neigh No
of Members
Mon Neigh
Pathloss
31 ... 50
dBm
1 ... 6
0 ... 6
30 ... 165
dB
1 ... 6
Mon Neigh SC
0 ... 511
1 ... 6
Mon Neigh
UARFCN DL
0 ... 16383
1 ... 6
(frequency
band
dependent)
Text
1 ... 6
249
IE Name
Str Neigh
CPICH Ec/No
Range/Unit
Arg
Description
34 ... 0
dB
1 ... 6
Str Neigh
CPICH RSCP
140 ... 15
dBm
1 ... 6
Str Neigh SC
0 ... 511
1 ... 6
3 ... 4
1 ... 6
Str Neigh
UARFCN DL
4.3.11.
250
1 ... 6
(frequency
band
dependent)
Network Parameters
IE Name
MCC
0 ... 16383
Range/Unit
Arg
Description
Mobile Country Code.
IE Name
MNC
4.3.12.
Range/Unit
Arg
Description
Mobile Network Code. May consist of
two or three digits.
Quality Measurement
The Frequent AQM elements, uplink and downlink scores, only appear in
merged logfiles (see RA UM section 17.2).
Uplink PESQ scores likewise only appear in merged logfiles.
Downlink PESQ scores, as well as the remaining AQM measurements (all
other elements prefixed with PESQ below), appear in merged as well as
unmerged logfiles. However, prior to merging, all such data lags behind other
data in the logfile. See RA UM section 17.2.2.
IE Name
AMR Codec
Name
Range/Unit
Arg
Text
1 ... 8
Description
Names of AMR codecs.
Argument: Identifies the AMR codec.
1: 12.2 kbit/s
2: 10.2 kbit/s
3: 7.95 kbit/s
4: 7.40 kbit/s
5: 6.70 kbit/s
6: 5.90 kbit/s
7: 5.15 kbit/s
8: 4.75 kbit/s
AMR Codec
Usage (DL)
0 ... 100
%
1 ... 8
AMR Codec
Usage (UL)
0 ... 100
%
1 ... 8
Frequent AQM
elements
PESQ
elements
251
IE Name
Speech Path
Delay
SQI
Range/Unit
Arg
Description
SQI MOS
1 ... 5
MOS
VTQI
1 ... 5
MOS
4.3.13.
Radio Measurement
IE Name
Call Event
Success Rate
Range/Unit
Arg
0 ... 100
%
Description
Calculated as:
# ends /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Only events occurring in WCDMA
mode are counted.
Regarding the events, see section 7.2.
DTX Rate DL
252
0 ... 100
%
IE Name
Range/Unit
Arg
Description
Power Control
Indication DL
1, 0, 1
Power Control
Indication UL
1, 0, 1
RACH Initial
TX
50 ... 34
dBm
RACH Max
Preambles
0 ... 64
RACH
Message TX
50 ... 34
dBm
RACH
Transmitted
Preambles
0 ... 64
RB Setup UL
DPCH SC
0 ... 108
RRC
Connection
Reject Cause
0 ... 1
253
IE Name
Range/Unit
Arg
Description
RRC
Connection
Reject Wait
Time
0 ... 16
s
RRC State
0 ... 5
or Text
SIR
20 ... 30
dB
SIR Target
20 ... 30
dB
UE Initial
Transmit
Power
60 ... 44
dBm
UE TxPower
60 ... 44
dBm
UL Interference
Serving
110 ... 70
dBm
UTRA Carrier
RSSI
130 ... 20
dBm
254
4.3.14.
SAN
Range/Unit
Arg
Description
SAN Cell Id
0 ... 228 1
1 ... 38
Num:
1 ... 38
0 ... 216 1
1 ... 38
Text
1 ... 38
Num: 1 ... 4
1 ... 38
or
Text (hex):
0000 ...
FFFF
SAN Cell Id
(RNC Part)
Num:
0 ... 212 1
or
Text (hex):
000 ...
FFF
SAN Cell
Name
SAN Cell Type
or Text
34 ... 0
dB
1 ... 38
SAN CPICH
RSCP
140 ... 15
dBm
1 ... 38
255
IE Name
SAN HS Cell
Type
Range/Unit
Arg
Num:
1 ... 2
1 ... 38
Description
Cell type for each cell in HSPA active
set.
1/SC: Serving cell
2/N-SC: Non-serving cell
or
Text
0 ... 38
SAN Pathloss
30 ... 165
dB
1 ... 38
SAN Primary
CPICH
TxPower
31 ... 50
dBm
1 ... 38
0 ... 511
1 ... 38
410 ...
10850
1 ... 38
1 ... 38
SAN No of
Members
SAN SC
SAN UARFCN
DL
(frequency
band
dependent)
SAN URA Id
4.3.15.
0 ... 228 1
Scan Data
256
Range/Unit
Arg
Description
0 ... 255
IE Name
Range/Unit
Arg
CW Sc RSSI
130 ... 20
dBm
1 ... 255
Description
RSSI scanning: RSSI of UARFCNs
scanned.
Argument: The channels are sorted
by ascending UARFCN. The argument
1 gives the channel with the lowest
UARFCN.
CW Sc
UARFCN
410 ...
10850
1 ... 255
(frequency
band
dependent)
Network
Search No Of
UARFCNs
0 ... 800
Network
Search SC
0 ... 511
1 ... 800
Network
Search
UARFCN
0 ... 10850
(frequency
band
dependent)
1 ... 800
257
IE Name
Other/Own
Range/Unit
Arg
0 ... 10
dB
1 ... 12;
0 ... 10
Description
Pilot scanning: Estimated ratio
between polluting signal power and
desired signal power on a CPICH
control channel, based on the
assumption that the active set has at
most n members, where n is given as
an attribute.
Attributes: The maximum number of
members assumed for the active set:
1, 2, 3, or 4.
Argument 1: UMTS frequency
(UARFCNs sorted in ascending order).
Argument 2: Power threshold (in dB)
relative to the power of the strongest
scrambling code; used to identify
possible active set members.
See DC UM section 10.2.7 for a full
description.
Poss No of AS
Members
0 ... 10
1 ... 12;
0 ... 10
258
IE Name
Sc IEs:
General
remarks
Range/Unit
Arg
Description
Sc Aggr Eb/Io
1 ... 4;
1 ... 512
Sc Aggr Ec
130 ... 25
dBm
1 ... 12;
1 ... 512
259
IE Name
Sc Aggr Ec/Io
Range/Unit
Arg
30 ... 0
dB
1 ... 12;
1 ... 512
Description
Pilot scanning: The aggregate code
power of the scrambling code (Ec,
energy per chip) relative to the total
signal power in the channel (Io).
See also general remarks above.
Sc Aggr-Peak
Ec
0 ... 90
dB
1 ... 4;
1 ... 512
Sc Cell Name
Text
1 ... 12;
1 ... 512
260
IE Name
Sc Cell Type
Range/Unit
Arg
Description
1 ... 3
1 ... 12;
1 ... 512
Sc Delay
Spread
0 ... 255
chips
1 ... 4;
1 ... 512
Sc Intra-freq
Cells
Text
1 ... 12
Sc Io
115 ... 25
dBm
1 ... 12
Sc No of SCs
0 ... 512
1 ... 12
261
IE Name
Range/Unit
Arg
Description
Sc Peak Eb/Io
10 ... 21
dB
1 ... 4;
1 ... 512
Sc Peak Ec
130 ... 25
dBm
1 ... 4;
1 ... 512
Sc Peak Ec/Io
30 ... 0
dB
1 ... 4;
1 ... 512
Sc P-SCH Ec
130 ... 25
dBm
1 ... 4;
1 ... 512
Sc P-SCH
Ec/Io
30 ... 0
dB
1 ... 4;
1 ... 512
Sc Rake Finger
Count
0 ... 51
1 ... 4;
1 ... 512
Sc SC
0 ... 511
1 ... 12;
1 ... 512
262
IE Name
Sc SC Group
Range/Unit
Arg
0 ... 7
1 ... 4;
1 ... 512
Description
Pilot scanning: The number of the
group to which each scanned
scrambling code belongs.
See also general remarks above.
Sc SIR
25 ... 30
dB
1 ... 4;
1 ... 512
Sc S-SCH Ec
130 ... 25
dBm
1 ... 4;
1 ... 512
Sc S-SCH
Ec/Io
30 ... 0
dB
1 ... 12;
1 ... 512
Sc Time Offset
0 ... 38399
chips
1 ... 12;
1 ... 512
Sc Time Offset
Slot Pos
1 ... 2560
1 ... 12;
1 ... 512
Sc UARFCN
410 ...
10850
1 ... 12
(frequency
band
dependent)
Sc UL
Interference
110 ... 70
dBm
1 ... 12;
1 ... 512
263
IE Name
SCH TS Sc
Es/Io
Range/Unit
Arg
Description
24 ... 0
dB
1...2560
(max;
see
Descr.)
SCH TS Sc
No of Segm
0 ... 2560
SCH TS Sc
Segm
1 ... 2560
1...2560
(max;
see
Descr.)
SCH TS Sc
Time Diff 1-2
1 ... 2560
chips
SCH TS Sc
Time Diff 2-3
1 ... 2560
chips
SCH TS Sc
UARFCN
410 ...
10850
(frequency
band
dependent)
264
IE Name
Spectr Ana
IEs: General
remark
Range/Unit
Arg
Description
Spectr Ana Sc
Freq DL
1 ...
2560
Spectr Ana Sc
Freq UL
1 ...
2560
Spectr Ana Sc
No of Freq DL
0 ... 2560
Spectr Ana Sc
No of Freq UL
0 ... 2560
Spectr Ana Sc
RSSI DL
130 ... 20
dBm
1 ...
2560
Spectr Ana Sc
RSSI UL
130 ... 20
dBm
1 ...
2560
4.3.16.
Serving Cell
Range/Unit
Arg
Serving Cell Id
0 ... 228 1
Serving Cell Id
(CI Part)
0 ... 216 1
or
Description
Text (hex):
0000 ...
FFFF
265
IE Name
Range/Unit
Arg
Serving Cell Id
(RNC Part)
0 ... 212 1
or
Description
Text (hex):
000 ...
FFF
Serving Cell
LAC
0 ... 65535
or
Text:
0000 ...
FFFF
Serving Cell
Name
Text
Serving Cell
RAC
0 ... 255
or
Text: 00 ...
FF
Serving CPICH
Ec/No
34 ... 0
dB
Serving CPICH
RSCP
140 ... 15
dBm
Serving
Pathloss
30 ... 165
dB
Serving
Primary CPICH
TxPower
31 ... 50
dBm
0 ... 511
Serving SC
266
IE Name
Serving
UARFCN DL
Range/Unit
Arg
410 ...
10850
(frequency
band
dependent)
Serving URA Id
0 ... 228 1
Description
4.4.
4.4.1.
Access Probe
IE Name
Range/Unit
Arg
Description
Access Power
Increment
0 ... 255
dB
Access Probe
Max Req Seq
0 ... 15
Access Probe
Max Rsp Seq
0 ... 15
Access Probe
Num Step
0 ... 15
Access Probe
Number
0 ... 255
Access Probe
Sequence
Number
0 ... 255
EV-DO Access
Max Probe Seq
0 ... 255
267
IE Name
Range/Unit
Arg
EV-DO Access
Probe Count
0 ... 255
EV-DO Access
Probe Num
Step
0 ... 255
EV-DO Access
Probe Seq
Count
0 ... 255
EV-DO Access
Result
0 ... 3
EV-DO Attempt
Duration
0 ... 255
timeslots
EV-DO Attempt
Transaction ID
0 ... 255
4.4.2.
Description
Active Set
Range/Unit
Arg
Description
Active Set
Band Class
Text
1 ... 6
Text
1 ... 6
Active Set
Channel
268
0 ... 1199
1 ... 6
IE Name
Range/Unit
Arg
0 ... 6
Active Set
DCCH Code
Channel
0 ... 2047
1 ... 6
Active Set
DCCH QOF
Mask Id
0 ... 3
1 ... 6
157 ... 10
dBm
1 ... 6
Active Set
Ec/Io
32 ... 0
dB
1 ... 6
Active Set
Ec/Io Sum
32 ... 0
dB
0 ... 2047
1 ... 6
0 ... 3
1 ... 6
Active Set PN
0 ... 511
1 ... 6
0 ... 2047
1 ... 6
0 ... 3
1 ... 6
Active Set
Count
Active Set Ec
4.4.3.
Description
269
IE Name
Range/Unit
Arg
Description
EV-DO Active
Set DRC Cover
0 ... 7
1 ... 6
EV-DO Active
Set DRC Lock
Text
1 ... 6
EV-DO Active
Set Drop Timer
Active
0, 1
1 ... 6
EV-DO Active
Set Drop Timer
Expired
0, 1
EV-DO Active
Set MAC Index
0 ... 127
1 ... 6
EV-DO Active
Set Predicted
DRC
0 ... 7
EV-DO Active
Set Predicted
SINR
30 ... 15
dB
EV-DO Active
Set RAB Offset
0 ... 255
1 ... 6
EV-DO Active
Set RAB
Usage (%)
0 ... 100
%
1 ... 6
EV-DO Active
Set RPC Index
0 ... 15
1 ... 6
270
0: Inactive
1: Active
1 ... 6
IE Name
Range/Unit
Arg
Description
EV-DO Active
Set RPC
Indication
1 ... 1
1 ... 6
EV-DO Active
Set Serving
DRC
0 ... 7
EV-DO Active
Set Serving PN
0 ... 511
EV-DO Active
Set Serving
RPC
0 ... 15
EV-DO Active
Set Serving
SINR
30 ... 15
dB
EV-DO Active
Set SINR
30 ... 15
dB
1 ... 6
EV-DO Active
Set Window
Center (chips)
0 ... 23768
chips
1 ... 6
EV-DO ALMP
State
Text
EV-DO Best
Pilot PN
0 ... 511
EV-DO Best
SINR
30 ... 15
dB
EV-DO
Connected
State
Text
271
IE Name
Range/Unit
Arg
Description
EV-DO Idle
State
Text
EV-DO Init
State
Text
EV-DO OVHD
Message State
Text
EV-DO Route
Update State
Text
4.4.4.
Candidate Set
Range/Unit
Arg
Description
Candidate Set
Band Class
Text
1 ... 6
Candidate Set
Cell Name
Text
1 ... 6
Candidate Set
Channel
0 ... 1199
1 ... 6
Candidate Set
Count
0 ... 6
Candidate Set
Ec
157 ... 10
dBm
1 ... 6
272
IE Name
Range/Unit
Arg
Candidate Set
Ec/Io
32 ... 0
dB
1 ... 6
Candidate Set
PN
0 ... 511
1 ... 6
4.4.5.
Description
Range/Unit
Arg
Description
EV-DO
Candidate Set
Drop Timer
Active
0, 1
1 ... 6
EV-DO
Candidate Set
Drop Timer
Expired
0, 1
EV-DO
Candidate Set
Window Center
(chips)
0 ... 23768
chips
4.4.6.
0: Inactive
1: Active
1 ... 6
1 ... 6
Channel Config
IE Name
Range/Unit
Arg
F-DCCH
Bitrate
0 ... 162600
kbit/s
F-DCCH
Enabled
Text
Description
273
IE Name
Range/Unit
Arg
Description
0 ... 65535
bits
F-DCCH
Frame Size
(ms)
Text
F-DCCH MUX
PDU
Text
F-DCCH Radio
Configuration
1 ... 9
F-FCH Bitrate
0 ... 162600
kbit/s
Text
F-FCH Frame
Length (bits)
0 ... 65535
bits
F-FCH Frame
Size (ms)
Text
F-FCH MUX
PDU
Text
F-FCH Radio
Configuration
1 ... 9
F-FCH Rate
0 ... 15
F-DCCH
Frame Length
(bits)
F-FCH
Enabled
274
IE Name
F-FCH Traffic
Type
F-SCH Rate
Range/Unit
Arg
0 ... 2
or Text
0 ... 5
Description
Forward link FCH traffic type; one of:
0: No forward traffic
1: Primary traffic
2: Secondary traffic
F-SCH0 Bitrate
0 ... 162600
kbit/s
Text
0 ... 65535
bits
F-SCH0 MUX
PDU
Text
F-SCH0 Radio
Configuration
1 ... 9
R-DCCH
Bitrate
0 ... 162600
kbit/s
R-DCCH
Enabled
Text
R-DCCH
Frame Length
(bits)
0 ... 65535
bits
R-DCCH MUX
PDU
Text
F-SCH0
Enabled
F-SCH0 Frame
Length (bits)
275
IE Name
Range/Unit
Arg
R-DCCH Radio
Configuration
1 ... 9
R-FCH Bitrate
0 ... 162600
kbit/s
Text
0 ... 65535
bits
R-FCH MUX
PDU
Text
R-FCH Radio
Configuration
1 ... 9
R-FCH Rate
0 ... 15
R-FCH
Enabled
R-FCH Frame
Length (bits)
Description
R-FCH Traffic
Type
or Text
R-SCH Rate
0 ... 5
R-SCH0 Bitrate
276
0 ... 162600
kbit/s
IE Name
Range/Unit
Arg
Text
R-SCH0 Frame
Length (bits)
0 ... 65535
bits
R-SCH0 MUX
PDU
Text
R-SCH0 Radio
Configuration
1 ... 9
IE Name
Range/Unit
Arg
EV-DO DRC
Rate Received
0 ... 4000
kbit/s
EV-DO DRC
Rate Received
Average
0 ... 4000
kbit/s
EV-DO DRC
Rate
Requested
0 ... 4000
kbit/s
EV-DO DRC
Rate
Requested
Average
0 ... 4000
kbit/s
R-SCH0
Enabled
4.4.7.
Description
Data
EV-DO FL IEs:
General
remark
Description
277
IE Name
Range/Unit
Arg
EV-DO FL Bad
Packet Count
0 ... 231 1
0 ... 13
Description
For each DRC index, the number of
packets on the forward link received
with bad CRC.
Attributes:
EV-DO FL Bad
Packet Rate
EV-DO FL
Good Packet
Count
0 ... 100
%
0 ... 13
0 ... 231 1
0 ... 13
EV-DO FL
Good Packet
Rate
0 ... 100
%
0 ... 13
EV-DO FL
Packet Size
Text
0 ... 13
EV-DO FL
Throughput
0 ... 4000
kbit/s
278
IE Name
EV-DO
Reverse Rate
Range/Unit
Arg
0 ... 1800
kbit/s
Description
Attributes:
EV-DO RL IEs:
General
remark
EV-DO RL
Packet Count
0 ... 231 1
1 ... 5
EV-DO RL
Packet Rate
0 ... 100
%
1 ... 5
EV-DO RL
Packet Size
Text
1 ... 5
EV-DO RL
Throughput
0 ... 1800
kbit/s
279
IE Name
EV-DO RRI
Range/Unit
Arg
0 ... 1800
kbit/s
Description
Attributes:
0 ... 4000
kbit/s
RLP DL
Throughput
0 ... 4000
kbit/s
RLP Erasure
Rate
0 ... 100
%
RLP
Retransmitted
Frames Rx
0 ... 100
%
RLP
Retransmitted
Frames Tx
0 ... 100
%
280
IE Name
RLP Rx
Channel Rate
Range/Unit
Arg
Description
0 ... 162600
kbit/s
0 ... 12
RLP Service ID
0 ... 254
RLP Total
Bytes Rx
0 ... 231
bytes
RLP Total
Bytes Tx
0 ... 231
bytes
0 ... 162600
kbit/s
0 ... 12
RLP Tx
Channel Rate
0 ... 2000
kbit/s
RLP UL
Throughput
0 ... 2000
kbit/s
281
4.4.8.
Finger
Range/Unit
Arg
Finger Count
0 ... 12
Finger Delay
(chips)
0 ... 32768
chips
1 ... 12
Description
Number of valid fingers.
Attributes:
Finger Energy
32 ... 10
dB
1 ... 12
Finger Energy
Sum
32 ... 10
dB
Finger Pilot PN
0 ... 511
1 ... 12
Finger Status
Text
1 ... 12
Searcher State
Text
282
4.4.9.
Finger EV-DO
Range/Unit
Arg
Description
0, 1
1 ... 12
EV-DO Finger
C/I
30 ... 15
dB
1 ... 12
EV-DO Finger
Diversity
Enabled
0, 1
1 ... 12
Antenna 0
Antenna 1
EV-DO Finger
Index
0 ... 11
1 ... 12
EV-DO Finger
MSTR
0 ... 232 1
chip/8
EV-DO Finger
MSTR Error
32767 ...
32767
chip/8
1 ... 12
283
IE Name
Range/Unit
Arg
EV-DO Finger
MSTR Pilot PN
0 ... 511
EV-DO Finger
RPC Cell Index
1 ... 6
1 ... 12
IE Name
Range/Unit
Arg
Description
Dialed Number
Text
MIN
Text
MSM Revision
Text
0 ... 7
0 ... 7
Text
4.4.10.
Mobile
Protocol
Revision Mobile
or Text
Slot Cycle
Index
Station Class
Mark
4.4.11.
Description
Neighbor Set
284
IE Name
Neighbor Set
Band Class
Range/Unit
Arg
Description
Text
1 ... 40
Neighbor Set
Cell Name
Text
1 ... 40
Neighbor Set
Channel
0 ... 1199
1 ... 40
Neighbor Set
Count
0 ... 40
Neighbor Set
Ec
157 ... 10
dBm
1 ... 40
Neighbor Set
Ec/Io
32 ... 0
dB
1 ... 40
Neighbor Set
PN
0 ... 511
1 ... 40
285
4.4.12.
Range/Unit
Arg
Description
EV-DO
Neighbor Set
Age
0 ... 65535
1 ... 40
EV-DO
Neighbor Set
Window Offset
(chips)
0 ... 65535
chips
1 ... 40
EV-DO
Neighbor Set
Window Size
(chips)
0 ... 65535
chips
1 ... 40
4.4.13.
Pilot Set
The argument, where present, points to the pilot set member index.
IE Name
Range/Unit
Arg
Description
1 ... 15
Text
1 ... 52
Text
1 ... 52
Pilot PN
Increment
286
Text
1 ... 52
IE Name
Range/Unit
Arg
0 ... 1199
1 ... 52
0 ... 52
32 ... 0
dB
1 ... 52
Pilot Set PN
0 ... 511
1 ... 52
Pilot Set
Channel
4.4.14.
Description
Channel number of RF channel used
by each pilot.
Total number of pilots in active,
candidate, and neighbor sets.
Polluters
These elements are obtained when using a scanner in follow phone mode:
see DC UM, section 13.3.
Current refers to the polluter data derived from the latest scan report.
Range/Unit
Arg
Polluters
Current Active
Set
0 ... 511
1 ... 6
Description
PN offset of each current active set
member.
Argument: Active set member index.
Polluters
Current Cell
Name
Text
Polluters
Current Ec/Io
32 ... 0
dB
1 ... 5
1 ... 5
Polluters
Current Pilot
PN
0 ... 511
1 ... 5
287
IE Name
Range/Unit
Arg
Polluters Top
List Cell Name
Text
1 ... 5
Description
Cell name of each polluter on the top
list.
Argument: Rank on polluter top list.
Polluters Top
List Channel
0 ... 1199
1 ... 5
Polluters Top
List Pilot PN
0 ... 511
1 ... 5
4.4.15.
Power
Range/Unit
Arg
Rx Power
120 ... 10
dBm
Tx Adjust
Tx Open Loop
Power
127 ... 36
dBm
Tx Pilot Power
127 ... 36
dBm
Tx Power
127 ... 36
dBm
Tx Power parameter.
288
Description
4.4.16.
Power EV-DO
Range/Unit
Arg
EV-DO DRC
State
Text
EV-DO PA
State
Text
EV-DO Power
Ratio ACK Pilot
20 ... 20
dB
EV-DO Power
Ratio Data Pilot
20 ... 20
dB
EV-DO Power
Ratio DRC
Pilot
20 ... 20
dB
4.4.17.
Description
Quality Measurement
See the descriptions (cellular technology independent) under GSM, section 4.2.6.
IE Name
Frequent AQM
elements
PESQ
elements
Speech Path
Delay
SQI MOS
289
4.4.18.
Radio Measurement
IE Name
EV-DO AT
State
Range/Unit
Arg
0 ... 5
or Text
Description
EV-DO access terminal state.
0: Inactive (AT is switched to 1x or is in
Deep Sleep)
1: Acquisition
2: Sync
3: Idle
4: Access
5: Connected
EV-DO Color
Code
0 ... 255
EV-DO Hybrid
Mode
Text
0 ... 100
%
EV-DO PER
EV-DO
Session State
290
0 ... 5
or Text
Attributes:
IE Name
Range/Unit
Arg
EV-DO UATI
0 ... 65535
1 ... 8
or
Text (hex):
0000 ...
FFFF
Description
EV-DO: List of active UATIs (Unicast
Access Terminal Identifiers), given as
32-bit values (lowest 4 bytes of full
UATI).
Argument: Sequence number.
EV-DO UATI
Count
0 ... 8
FER DCCH
0 ... 100
%
FER FCH
0 ... 100
%
FER SCH0
0 ... 100
%
FER SCH1
0 ... 100
%
FER Total
0 ... 100
%
Frame Offset
0 ... 15
0 ... 65535
Text
See
Description
Service Option
Soft Handoff
State
291
4.4.19.
Scan Data
Not sorted: Pilots are ordered by PN offset (no ranking). Lowest PN offset
first.
Strongest: Pilots are ranked by descending peak Ec/Io for each scanned
RF channel separately. Elements that are not differentiated for pilots lack
this argument.
Weakest: Pilots are ranked by ascending peak Ec/Io for each scanned RF
channel separately. Elements that are not differentiated for pilots lack this
argument.
Best (among all frequencies): Pilots from all scanned RF channels are
ranked by descending peak Ec/Io in a single list. The first argument is
always 1 in this case.
Range/Unit
Arg
Scanned Band
Text
1 ... 12
Scanned Cell
Name
Text
1 ... 12;
1 ... 512
Scanned
Channel
0 ... 1199
1 ... 12
Scanned Delay
3 ... 60
chips
1 ... 12;
1 ... 512
Scanned Delay
Spread
0 ... 63
chips
1 ... 12;
1 ... 512
292
Description
IE Name
Range/Unit
Arg
Scanned Ec
157 ... 10
dBm
1 ... 12;
1 ... 512
32 ... 0
dB
1 ... 12;
1 ... 512
125 ... 25
dBm
1 ... 12
Scanned Pilot
PN
0 ... 511
1 ... 12;
1 ... 512
Scanned Pilots
Count
0 ... 512
1 ... 12
Scanned Ec/Io
Scanned Io
Description
Range/Unit
Arg
0 ... 1199
1 ... 512
Description
RF channel number of each RF
channel scanned.
Argument: 1 means the RF channel
with the lowest number, etc.
Scanned CW
Channels
Count
0 ... 512
Scanned CW
RSSI
120 ... 30
dBm
1 ... 512
Scanned CW
RSSI Average
120 ... 30
dBm
293
Range/Unit
Arg
Spectrum
Analysis Scan
DL RSSI
130 ... 20
dBm
1 ...
2560
Spectrum
Scanned Freq
Count
0 ... 2560
Spectrum
Scanned
Frequency
1 ...
2560
4.4.20.
CDMA Rx
State
Country ID
Server
IE Name
Base ID
Description
Range/Unit
Arg
Description
0 ... 65535
Text
One of:
Entering CDMA
Sync Channel
Paging Channel
Traffic Channel
Exit
0 ... 999
Text
Network ID
0 ... 65535
Protocol
Revision Base
0 ... 7
EV-DO
Revision
294
or Text
IE Name
Protocol
Revision In
Use
RF Mode
Range/Unit
Arg
0 ... 7
or Text
Text
Description
<technology> is one of
Analog, CDMA, 1xEV-DO, and
<phone state> is one of
Init, Idle, Access, Traffic
Searcher
Window A
0 ... 15
See
Description
Searcher
Window N
0 ... 15
Searcher
Window R
0 ... 15
Sector ID
Text
0 ... 255
0 ... 65535
32 ... 0
dB
63 ... 0
Numeric
Subnet Mask
System ID
T-Add
See
Description
295
IE Name
T-Comp
Range/Unit
Arg
Description
0 ... 8
dB
0 ... 15
Numeric
32 ... 0
dB
63 ... 0
Numeric
See
Description
T-Drop
See
Description
T-TDrop
0 ... 15
Numeric
See
Description
Text (0.1 s
... 319 s)
4.4.21.
Session EV-DO
Range/Unit
Arg
Description
EV-DO
Session Full
UATI
Text
EV-DO
Session RATI
0 ... 255
296
IE Name
Range/Unit
Arg
Description
EV-DO
Session Result
0, 1
EV-DO
Session
Transaction ID
0 ... 255
EV-DO
Session UATI
Color Code
0 ... 255
4.4.22.
Statistics
IE Name
Range/Unit
Arg
Description
Call Blocked
Count
0 ... 1000
Call Dropped
Count
0 ... 1000
Call Success
Count
0 ... 1000
Calls Blocked
0 ... 100
%
Calculated as:
# blocks /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Regarding the events, see section 7.3.
297
IE Name
Range/Unit
Arg
Calls Dropped
0 ... 100
%
Description
Calculated as:
# drops /
(# blocks + # drops + # ends)
where
blocks = Blocked Call events
drops = Dropped Call events
ends = Call End events
Regarding the events, see section 7.3.
EV-DO Access
Failure Rate
0 ... 100
%
EV-DO
Connection
Failure Rate
0 ... 100
%
EV-DO
Session Failure
Rate
0 ... 100
%
4.5.
IE Name
Range/Unit
Arg
App. Bytes
Received
0 ... 2 109
bytes
App. Bytes
Sent
0 ... 2 109
bytes
App.
Throughput DL
0 ... 80000
kbit/s
298
Description
IE Name
Range/Unit
Arg
Description
App.
Throughput UL
0 ... 80000
kbit/s
Connection
Duration
Text
hh:mm:ss
IP Address
Text
NDIS/RAS
IEs: General
remark
NDIS/RAS
Bytes
Received
0 ... 2 109
bytes
NDIS/RAS
Bytes Sent
0 ... 2 109
bytes
NDIS/RAS
Current
Throughput DL
0 ... 80000
kbit/s
NDIS/RAS
Current
Throughput UL
0 ... 80000
kbit/s
Ping Delay
0 ... 30000
ms
Ping Size
0 ... 2000
bytes
RAS IEs:
General
remark
RAS Alignment
Errors
These elements are valid only if the device uses a RAS dial-up
connection.
0 ... 2 109
299
IE Name
Range/Unit
Arg
Description
RAS Buffer
Overrun Errors
0 ... 2 109
RAS
Compression
Ratio In
0 ... 2000
RAS
Compression
Ratio Out
0 ... 2000
RAS CRC
Errors
0 ... 2 109
RAS Frames
Received
0 ... 2 109
RAS Frames
Sent
0 ... 2 109
RAS Framing
Errors
0 ... 2 109
RAS Hardware
Overrun Errors
0 ... 2 109
RAS Timeout
Errors
0 ... 2 109
Session App.
Bytes
Received
0 ... 2 109
bytes
Session App.
Bytes Sent
0 ... 2 109
bytes
Session App.
Mean
Throughput DL
0 ... 80000
kbit/s
300
IE Name
Range/Unit
Arg
Session App.
Mean
Throughput UL
0 ... 80000
kbit/s
Session
Current Packet
Loss
0 ... 100
%
Session
Current
Throughput DL
0 ... 80000
kbit/s
Session
Current
Throughput UL
0 ... 80000
kbit/s
Session
Duration
Text
hh:mm:ss
Session
Information
Text
VSQI
Intermediate
Score
1 ... 5
MOS
VSQI Realtime
Score
1 ... 5
MOS
Description
301
5.
These tables are valid for Data Collection and Route Analysis alike.
Elements derived from positioning equipment are not included in the tables.
In the Information Elements column, <string>* means all IEs beginning with
<string>.
A gray checkmark means that the IE support is restricted to a subset of the
devices in the column; see the accompanying footnote for details.
The tables include certain devices that are no longer connectable in this
version of TEMS Investigation; these devices are printed in non-boldface.
They are retained here since old logfiles recorded with the devices can still be
replayed in the application. There also exist information elements which are
unique to one or more of these devices.
5.1.
302
PCTel Scanners
EV-DO Rev A
EV-DO Rev 0
Information
Elements
CDMA (1x)
Qualcomm Sc.
PCTel Scanners
EV-DO Rev A
EV-DO Rev 0
Information
Elements
CDMA (1x)
Qualcomm Sc.
Spectr Ana*
Tx Open Loop Power
Tx Pilot Power
All other IEs
5.2.
The Sony Ericsson column containing W995* is also valid for TM506 and
W760i.
Information
Elements
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
Adjacent RxLev*
Adjacent Scan
AMR Active Set*
AMR C/I*
AMR Codec*
AMR Hysteresis
AMR Threshold
ARFCN*
Attach Time
Band Control
BER*
303
Information
Elements
BLER/Timeslot
BSIC* a
C Value
C/A* b
C/I Absolute, Best, Best:
ARFCN, Worst, Worst:
ARFCN c
C/I* (others)
C1
C2
C31
C32
Cell EGPRS Support
Cell GPRS Support
Cell Id*
Cell Name*
CGI*
Channel*
Ciphering Algorithm
Coding Scheme DL
Coding Scheme UL
CS-* DL Usage...
Current CS*
Current MCS*
Data Mode*
Disable Handover d
Downlink Sign. Ctr Curr.
Downlink Sign. Ctr Max
DTX Rate DL
EGPRS BEP (*)
304
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
Information
Elements
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
305
Information
Elements
Mode*
Modulation* g
MS Behavior Modified
MS Power Control Level
MS Tx Power
Neighbor ARFCN*
Neighbor BSIC*
Neighbor C1*
Neighbor C2*
Neighbor C31*
Neighbor C32*
Neighbor Cell*
Neighbor LAC*
Neighbor RxLev*
Neighbor (SI) ARFCN
Network Control Order
Network Mode Of Oper.
Number Of Hopp. Freq.
Number Of Used Tslots*
PBCCH Timeslot
PDCH Utilization*
PDP*
PESQ* e
Preferred GAN Mode f
Prevent*
Q Search Power h
RAC*
Radio Link Timeout Curr.
Radio Link Timeout Max
RLA_P*
306
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
Information
Elements
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
RLC BLER*
RLC Block*
RLC Bytes*
RLC Thrput DL (%)
RLC Thrput DL (kbit/s)
RLC Thrput UL (%) i
RLC Thrput UL (kbit/s)
RLP*
RxLev*
RxQual*
Scanned Adjacent*
Scanned ARFCN
Scanned Band
Scanned BSIC
Scanned C/A*
Scanned C/I
Scanned Cell Name
Scanned Channels No of
Scanned RxLev*
Serving Cell List Active
Signal Strength*
SNDCP BLER*
SNDCP Bytes*
SNDCP Throughput DL
SNDCP Throughput UL
Speech Codec
Speech Path Delay e
SQI*
Strongest Sc. C/I
Strongest Sc.* (others)
307
Information
Elements
Motorola
Nokia
Qualc. Dt Sc
Sony Ericsson
308
5.3.
The Sony Ericsson column containing Z750i is also valid for TM506.
AMR* a
AS ... RSCP Sum/Ant.*
AS*
Averaged BER
BLER Target Control*
Call Event Success Rate
Cell Barred Control*
Compressed Mode
CW*
Det Neigh * Sum/Ant.*
Det Neigh CPICH Tx P.
Det Neigh Pathloss
Det Neigh* (others)
DPCCH ISCP DL
DPCCH Power UL
DPCCH RSCP DL
DTX Rate DL
DVB-H*
Finger 1st*
Finger 2nd*, 3rd*, 4th*
Finger 5th* ... 12th*
Firmware Version
Frequent AQM* c
GSM Neigh*
Hardware
HO Event Type*
HS 64-QAM Mod. Rate
Qualcomm
Scan.
Nokia
Information
Elements
W995*
Z750i, C905*/C702, W760i
K800i
K600i
V800, Z800
Razr V3xx, Razr2 V9
E1000, E1070, Razr V3x
A835, A845
309
HS MIMO*
HS Phy*
HS UL E-DPCCH Power
HS UL E-DPDCH Power
HS UL E-TFC*
HS UL Transm. Distr.*
HS UL UE Tr. Pwr Headr.
HS UL* (others)
HS* (others)
HS-DSCH HARQ Proc...
HS-DSCH Post Rate
HS-DSCH Pre Rate
HS-DSCH Throughput
HS-DSCH * Per Process
HS-DSCH* (others)
HS-SCCH*
IMEI
Inter-freq*
Inter-RAT*
Intra-freq*
MCC
Message Hex Dump...
MNC
Mode*
Mon Neigh * Sum/Ant.*
Mon Neigh* (others)
MS Behavior Modified
Network Search*
Other/Own 1st*, 2nd*
Other/Own 3rd*, 4th*
310
Qualcomm
Scan.
Nokia
Information
Elements
W995*
Z750i, C905*/C702, W760i
K800i
K600i
V800, Z800
Razr V3xx, Razr2 V9
E1000, E1070, Razr V3x
A835, A845
Qualcomm
Scan.
Nokia
Information
Elements
W995*
Z750i, C905*/C702, W760i
K800i
K600i
V800, Z800
Razr V3xx, Razr2 V9
E1000, E1070, Razr V3x
A835, A845
EX
EX
311
Sc [1st4th] Intra-fr. C.
Sc [1st4th] Io
Sc [1st4th] No Of SCs
Sc [1st4th] Peak*
Sc [1st4th] P-SCH*
Sc [1st4th] Rake F. C.
Sc [1st4th] SC
Sc [1st4th] SC Group
Sc [1st4th] SIR
Sc [1st4th] S-SCH*
Sc [1st4th] Time Offset*
Sc [1st4th] UARFCN
Sc [1st4th] UL Interf.
Sc [5th12th]*
Sc Best*: same as Sc [1st4th]*, see above
SCH TS Sc*
Sector Control
Serving * Sum/per Ant.
Serving Cell LAC*
Serving Cell RAC*
Serving CPICH Tx Pwr
Serving URA Id
Serving* (others)
SF*
SHO*
SIR
SIR Target
Spectr Ana DL*
Spectr Ana UL*
SQI*
312
Qualcomm
Scan.
Nokia
Information
Elements
W995*
Z750i, C905*/C702, W760i
K800i
K600i
V800, Z800
Razr V3xx, Razr2 V9
E1000, E1070, Razr V3x
A835, A845
EX
EX
Qualcomm
Scan.
Nokia
Information
Elements
W995*
Z750i, C905*/C702, W760i
K800i
K600i
V800, Z800
Razr V3xx, Razr2 V9
E1000, E1070, Razr V3x
A835, A845
313
5.4.
All LTE elements are populated by both DRT and PCTel, except:
314
6.
6.1.
While in soft handover, the phone is power controlled jointly by all members
of the active set. Power control commands are received on the DPCCH.
Certain Sony Ericsson phones deliver two mode reports that are relevant in
this context, TPC Info and DPCCH DL. TPC Info shows the power control
commands from each cell in the active set separately, whereas the DPCCH
DL report gives the final power control decision obtained by combining and
weighting the input from all active set members.
The plain-text decoding of the TPC Info mode report represents the power
control commands from each cell by a string of letters as follows:
Q = Not valid: The cell was not part of the active set at this time.
Since the power control frequency is 1500 Hz, each letter in the string
represents 1/1500 of a second.
315
7.
Predefined Events
Here all predefined events are listed and explained, along with any extra
information provided in the application (see section 8.3.4). All cause values
are decoded into plain-text format in the presentation. Not all of the extra
information listed in the table is necessarily included every time the event
occurs.
The descriptions of how events are triggered are not always exhaustive. In
exceptional cases, an event may be triggered by a message not mentioned
here.
Event symbols shown are default symbols in Data Collection; they can be
changed in line charts (DC UM section 24.4.3) and maps (DC UM section
26.5.4). In Route Analysis the symbols used for events are fixed.
7.1.
General Events
Under this heading have been collected events that do not result from
interaction with a cellular network.
Event Name
Symbol
Filemark
Description/Extra Information
A filemark was encountered in the logfile.
GPS Connected
GPS Disconnected
316
Event Name
Symbol
Description/Extra Information
Positions reported by the GPS unit have become
invalid (GPS coverage lost).
(red
triangle)
GPS Position Valid
(dark
green
circle)
MS Connected
(green)
MS Disconnected
(red)
Recording Paused
Recording Resumed
Scanner Connected
(green)
Scanner
Disconnected
(red)
317
7.2.
GSM/WCDMA/TD-SCDMA Events
For TD-SCDMA phones a subset of the listed events can be generated (in
both TD-SCDMA and GSM mode). The extra information given in the
table is rarely provided with events originating from TD-SCDMA phones.
Meaning
g w
ga
sg
sw
Event List
Event Name
AQM Out of Synch
318
Symbol
*
g
w
Description/Extra Information
The synchronization between the AQM
module and the Call Generator has been
lost. See the document AQM in TEMS
Products (Including PESQ).
Event Name
Symbol
Description/Extra Information
AQM Synched
g
w
Authentication
Failure
g
w
Blocked Call
(red)
g
w
ga
GSM/WCDMA/TD-SCDMA: Call
abnormally ended prior to Call Established
event (for example because all traffic
channels were busy).
GAN: Layer 3 message Activate Channel
Failure received prior to Call Established.
Extra information:
Block type
CC cause
RR cause
319
Event Name
Symbol
Call Attempt
(gray)
Description/Extra Information
g
w
ga
g
w
g
w
Call Established
(green)
320
g
w
ga
Call duration
(GSM/WCDMA/TD-SCDMA:) the
Layer 3 message Connect (MO call) or
Connect Acknowledge (MT call)
Event Name
Call Initiation
Symbol
Description/Extra Information
g
w
Call Setup
g
w
ga
(GSM/WCDMA/TD-SCDMA:) one of
the Layer 3 messages Alerting or
Connect
Extra information:
321
Event Name
Cell Change Order
To UTRAN
Symbol
Description/Extra Information
Cell Reselection
g
w
Cell Reselection
From UTRAN
Cell Reselection To
UTRAN
Compressed Mode
Entered
Compressed Mode
Exited
Datalink Failure
Dedicated Mode
322
Event Name
Dropped Call
Symbol
*
g
w
Description/Extra Information
Call abnormally ended after Call
Established event.
Extra information:
Drop type
Cause
CC cause
EGPRS MS Out Of
Memory
Handover
Handover Failure
ga
ga
Handover From
UTRAN
Handover From
UTRAN Failure
Handover Intracell
323
Event Name
Symbol
Description/Extra Information
Handover Intracell
Failure
Handover To GAN
ga
Handover To GAN
Failure
ga
Handover To UTRAN
Handover To UTRAN
Failure
HS Serving Cell HO
HS Serving Cell HO
Failure
Idle Mode
Inter-frequency Cell
Reselection
324
Event Name
Inter-frequency
Handover
Symbol
*
w
Description/Extra Information
Successful WCDMA inter-frequency
handover.
Extra information: New UARFCN.
Inter-frequency
Handover Failure
Intra-frequency Hard
Handover
Intra-frequency Hard
Handover Failure
Limited Service
Mode
Location Area
Update
g
w
Location Area
Update Failure
g
w
Measurement
Report 2
Measurement
Report 3
325
Event Name
Symbol
Measurement
Report 6
*
w
Description/Extra Information
Measurement report containing phoneinternal measurements sent from phone
(UMTS reporting event e6a, etc.).
See 3GPP 25.331, section 14.6.
Extra information: Type of UMTS event.
Missing GSM
Neighbor
sg
(yellow
bar on
the
right)
326
Event Name
Missing GSM
Neighbor, GSM
Symmetry
Symbol
(yellow
bar on
the
right)
Description/Extra Information
327
Event Name
Missing LTE
Neighbor
Symbol
(yellow
bar on
the
right)
Description/Extra Information
This event is based on LTE scan data. It
requires that a cell file is loaded and that
the currently strongest cell has a neighbor
list defined in that file.
Triggered in the following cases:
1. A cell not defined as a neighbor of the
strongest cell is more than n dB
stronger than at least one neighbor of
the strongest cell. The margin n dB is
set in the General window under LTE.
2. A cell not defined as a neighbor of the
strongest cell is within n dB of the
strongest cell. (The event is then
triggered regardless of the strength of
defined neighbors.)
3. No cell from the strongest cell's
neighbor list is detected, but at least
one cell is detected besides the
strongest cell. (The event is then
triggered regardless of the strength of
that cell.)
The signal power measure used in the
comparisons is RSRQ.
Extra information: EARFCN plus the
following (different for each of the three
cases listed above):
1. Defined neighbor Cell Identity and
RSRQ; missing neighbor Cell Identity
and RSRQ.
2. Strongest cell Cell Identity; missing
neighbor Cell Identity and RSRQ.
3. Strongest cell Cell Identity; missing
neighbor Cell Identity.
328
Event Name
Missing TD-SCDMA
Neighbor
Symbol
(yellow
bar on
the
right)
Description/Extra Information
This event is based on TD-SCDMA scan
data. It requires that a cell file is loaded
and that the currently strongest cell has a
neighbor list defined in that file.
Triggered in the following cases:
1. A cell not defined as a neighbor of the
strongest cell is more than n dB
stronger than at least one neighbor of
the strongest cell. The margin n dB is
set in the General window under TDSCDMA.
2. A cell not defined as a neighbor of the
strongest cell is within n dB of the
strongest cell. (The event is then
triggered regardless of the strength of
defined neighbors.)
3. No cell from the strongest cells
neighbor list is detected, but at least
one cell is detected besides the
strongest cell. (The event is then
triggered regardless of the strength of
that cell.)
The signal power measure used in the
comparisons is Ec/Io.
Extra information: UARFCN plus the
following (different for each of the three
cases listed above):
1. Defined neighbor CPI and Ec/Io;
missing neighbor CPI and Ec/Io.
2. Strongest cell CPI; missing neighbor
CPI and Ec/Io.
3. Strongest cell CPI; missing neighbor
CPI.
329
Event Name
Missing WCDMA
Intra-frequency
Neighbor
Symbol
(yellow
bar on
the
right)
Description/Extra Information
330
Event Name
Missing WCDMA
Neighbor
Symbol
(yellow
bar on
the
right)
*
(c)
sw
Description/Extra Information
This event is based on WCDMA scan
data. It requires either
331
Event Name
More Than 3 Strong
SCs
Symbol
*
sw
(red bar
on the
right)
Description/Extra Information
This event is based on WCDMA scan
data.
The information element Poss No of AS
Members (with argument = power
threshold 3 dB) is larger than 3, and all the
detected scrambling codes are stronger
than 100 dBm.
Extra information: UARFCN.
No Service Mode
Packet Mode
PDP Context
Activation
g
w
PDP Context
Activation Failure
g
w
PDP Context
Deactivation
g
w
PDU Error
PS Attach
g
w
332
Event Name
PS Attach Failure
Symbol
*
g
w
Description/Extra Information
The phone failed to attach to the packet
service.
Extra information: Attach type; failure
cause.
PS Channel Type
Switch Complete
PS Channel Type
Switch Failure
PS Detach
g
w
PS RAB Channel
Rate Switch
Complete
PS RAB Channel
Rate Switch Failure
RACH Error
Radio Bearer
Reconfiguration
Failure
333
Event Name
Radio Bearer Setup
Failure
Symbol
Description/Extra Information
Radio Link
Replacement
Radio Link
Replacement Failure
Ringing
g
w
g
w
334
Event Name
Symbol
Rove In To GAN
Description/Extra Information
ga
Rove In To GAN
Failure
ga
Rove In To GAN
Redirect
ga
ga
ga
RRC Connection
Abnormal Release
RRC Connection
Reject
RRC Established
(red)
(green)
Scanning Mode
sg
335
Event Name
Symbol
Description/Extra Information
Security Mode
Failure
SHO Procedure
Complete
SHO Procedure
Complete Without
Measurement
Control
g
w
SMS Error
g
w
SMS Received
g
w
SMS Sent
g
w
T200 Expired
T3126 Expired
T3162 Expired
T3168 Expired
T3170 Expired
336
7.3.
CDMA Events
Event Name
Symbol
Blocked Call
(red)
Call Attempt
(gray)
Description/Triggered By
Unexpected change to idle or init state before
Call Established, or Order (PCH) Message
received with one of the order codes Reorder,
Intercept, Registration Reject, or Release.
MO call: Origination (ACH) message sent with a
voice Service Option.
MT call: Page Response (ACH) message
received with a voice Service Option.
A call attempt (see Call Attempt above) was
repeated.
Call End
Call Established
(green)
Call Initiation
Call Setup
Dedicated Mode
Dropped Call
EV-DO 1x Tuneaway
EV-DO Access
Failure
337
Event Name
EV-DO Access
Success
Symbol
Description/Triggered By
An EV-DO access attempt completed
successfully.
Triggered by EV-DO Access Attempt Report.
EV-DO Connection
Failure
EV-DO Connection
Success
EV-DO Handoff
1 Active
EV-DO Handoff
2 Actives
EV-DO Handoff
3 Actives
EV-DO Handoff
4 Actives
EV-DO Handoff
5 Actives
EV-DO Handoff
6 Actives
338
Event Name
EV-DO Island
Symbol
Description/Triggered By
There is only a single active pilot and no
candidates.
Triggered by EV-DO Pilot Sets Ver2 Report.
EV-DO Session
Failure
EV-DO Session
Success
Idle Handoff
Idle Handoff To
Analog
Idle Handoff To
CDMA
Idle Mode
339
Event Name
Symbol
Description/Triggered By
See algorithm description in section 7.3.1.
Missing CDMA
Neighbor
(olive
green
bar on
the
right)
Narrowband
Interference
No Service Mode
Packet Mode
Polluter
340
Event Name
Symbol
Description/Triggered By
Soft Handoff
Complete
Traffic Handoff To
Analog
Traffic Handoff To
CDMA
341
7.3.1.
, where
.
3. Let
, where
is the maximum number of fingers
that a receiver can demodulate.
4. For
, check whether the
strongest pilot is in the
neighbor list. Any pilot not in the neighbor list is flagged as a missing
neighbor.
5. Calculate
6. Calculate
where
9. If
polluter.
342
such that
is a
7.4.
Data Events
Symbol
Description/Extra Information
An IP address has been assigned to the RAS
client.
Extra information: IP address.
NDIS Error
Ping Response
Ping Success
Ping size
Ping Timeout
Ping delay
Ping size
Ping size
PS Access Failure
PS Access Success
RAS Dial
343
Event Name
RAS Error
Symbol
Description/Extra Information
An error occurred when performing a RAS dialup.
Extra information: Failure cause; see DC UM
section 15.21.2.
RAS Hangup
Session End
Session Error
Session duration
Session Start
Streaming State
Changed
344
8.
Overview of Preconfigured
Presentation Windows
This chapter explains the purpose of each window found on the Menu tab of
the Navigator in Data Collection as well as Route Analysis. The set of
presentation windows is nearly identical in the two applications (for all
technologies that Route Analysis supports); where differences occur, they are
pointed out below.
Note that only windows covered by your license will show up in the
applications. For example, if your license does not cover CDMA or EV-DO, all
windows containing CDMA or EV-DO data will be hidden.
8.1.
8.1.1.
GPS
Description
Shows selected GPS data.
8.1.2.
8.1.2.1.
Window Name
Data Bytes Sent/Received
Description
Shows the total number of data bytes sent
and received at various protocol levels.
345
Window Name
Description
Data Session
EV-DO Overview
EV-DO Status
8.1.2.2.
Window Name
Description
A/C/N Sets
Active Set
Candidate Set
Finger Info
Neighbor Set
346
Window Name
Description
Radio Parameters
Serving
Speech Quality
8.1.3.
8.1.3.1.
Description
Data Session
Data Throughput
Data Timeslots
347
Window Name
Description
EGPRS Status
GPRS Status
HSCSD Throughput
PDP Context
8.1.3.2.
Window Name
Description
C/A
C/I
348
8.1.3.3.
Window Name
Uplink Neighbors
Uplink Radio Parameters
Description
These windows present various
categories of information from MTR files.
8.1.3.4.
Window Name
Description
AMR Settings
Current Channel
349
Window Name
Description
GAN Status
Hopping Channels
Modified MS Behavior
Shows the current state of the userconfigurable GSM properties for the
phone: see DC UM chapter 16.
Radio Parameters
Serving + Neighbors
Serving + Neighbors By
Band
Speech Quality
8.1.4.
iDEN Status
350
Description
Shows iDEN information elements.
8.1.5.
Scanned Cells
Description
Shows various data for each LTE cell
scanned: EARFCN, CI, RSRP, and
RSRQ.
8.1.6.
8.1.6.1.
Window Name
Description
Data Session
HSDPA Analysis
PDP Context
8.1.6.2.
Window Name
Scanned Cells
8.1.6.3.
Description
Shows various data for each TD-SCDMA
cell scanned, including UARFCN, CPI,
Ec/Io, Eps/Io, and SIR.
351
8.1.6.4.
Window Name
Description
Cell Reselection
Current Channel
Radio Parameters
Serving + Neighbor
Timeslots
Shows timeslot usage as well as pertimeslot RSCP, ISCP, and C/I readings.
Transport Channels
8.1.7.
8.1.7.1.
352
Window Name
Description
Data Session
DVB-H Analysis
(Data Collection only)
HSDPA Analysis
HSUPA Analysis
PDP Context
8.1.7.2.
Window Name
Description
CPICH Data
353
Window Name
Description
Network Search
8.1.7.3.
Window Name
Description
AMR Codecs
GSM Neighbors
Handover
354
Window Name
Description
Modified MS Behavior
Shows the current state of the userconfigurable WCDMA properties for the
phone: see DC UM chapter 16.
RACH Analysis
Radio Parameters
Serving/Active Set +
Neighbors
Speech Quality
Transport Channels
355
8.1.8.
8.2.
Description
Shows data on all preambles detected,
including power and CINR.
8.3.
8.3.1.
Description
Call Analysis
Missing Neighbor
Session Status
356
8.3.2.
8.3.3.
iDEN Messages
8.3.4.
Description
Description
Lists messages from iDEN phones.
Data Reports
Description
Lists messages pertaining to data service
testing. Note that these messages contain
some information not appearing in the
information elements in section 4.5 (in
particular, data on throughput and overall
VSQI scores for streaming sessions in
Session End Reports).
Also lists H.245 and IP protocol reports.
Error Reports
357
Window Name
Events
Description
Lists all events that occur, both predefined
and user-defined. All predefined events
are listed in chapter 7 of this volume; how
to create user-defined events in each of
the two applications is covered in DC UM
section 17.3 and in RA UM section 4.3.
As in other message windows, you can
double-click an event in the Events
windows to view details on the event in a
separate plain-text window. For certain
events, extra information is provided. The
contents of this extra information are
detailed in chapter 7.
IP Analysis
Layer 2 Messages
Layer 3 Messages
358
Window Name
Mode Reports
8.4.
Description
Lists (vendor-specific) reports from
external devices concerning their status.
By default this window also shows certain
events, the emphasis being on call,
handover, and failure events.
8.5.
8.5.1.
Description
8.5.2.
Description
Tracks EGPRS performance, including
throughput and BEP. Shows data service
testing events.
359
Window Name
Description
8.5.3.
8.5.4.
360
Description
Description
Tracks LTE RSRP and RSRQ on a
particular scanned EARFCN.
Window Name
RSSI Scan Line Chart
8.5.5.
Description
Tracks the strongest frequencies found
during RSSI scanning.
Description
Tracks data service performance for TDSCDMA, including application and RLC
layer throughput as well as data service
testing events.
8.5.6.
Description
361
Window Name
Description
HS UL Output Power
362
8.5.7.
Description
8.6.
8.6.1.
Description
Narrowband Interference
Scan Bar Chart
(Data Collection only)
363
8.6.2.
Description
8.6.3.
Description
364
8.6.4.
Description
8.6.5.
Description
HS UL E-TFC Accumulated:
Sony Ericsson
HS UL Transmission
Distribution Accumulated:
Sony Ericsson
HS UL Transmission
Distribution Current: Sony
Ericsson
365
Window Name
Description
8.6.6.
Description
366
Window Name
Description
8.7.
Preconfigured Maps
8.8.
8.9.
status windows
367
line charts
bar charts.
These templates contain no data; you customize their contents from scratch.
368
Appendix A. Abbreviations
Appendix A. Abbreviations
ACR
AG
AGC
ALMP
AM
AMR
AMR-NB
AMR-WB
APM
AQM
ARFCN
AS
ASP
AT
BCC
BCCH
BCH
BEP
BER
BLEP
BLER
BOOTP
BSIC
BSN
C/A
C/I
C/N
CBCH
CDMA
CFO
CGI
CHAP
CI
CINR
CPI
369
CPICH
CQI
CRC
CS
CSD
CW
DCCH
DCD
DCH
DGPS
DL
DNS
DPCCH
DPCH
DR
DRC
DRX
DSC
DSC
DSCH
DTX
DVB-H
E-AGCH
EARFCN
ECP
E-DCH
EDGE
E-DPCCH
E-DPDCH
EFR
EGPRS
E-HICH
EIRP
E-RGCH
ESN
ESS
E-TFC
E-TFCI
EV-DO (1xEV-DO)
EVRC
FACCH
FACH
370
Appendix A. Abbreviations
FCH
FER
FL
FPC
FR
FWT
GA-CSR
GAN
GANC
GA-RC
GERAN
GGSN
GMM
GPRS
GPS
GRR
GSM
HARQ
HO
HR
H-RNTI
HSCSD
HSDPA
HS-DSCH
HSN
HSPA
HS-PDSCH
HS-SCCH
HSUPA
IE
IMEI
IP
IPCP
ISCP
JPEG
KML
KPI
LA
LAC
LAT
LCP
LLC
Fundamental Channel
Frame Erasure Rate
Forward Link
Forward Power Control
Full Rate
Fixed Wireless Terminal
Generic Access Circuit Switched Resources
Generic Access Network
Generic Access Network Controller
Generic Access Resource Control
GSM EDGE Radio Access Network
Gateway GPRS Support Node
GPRS Mobility Management
General Packet Radio Service
Global Positioning System
GPRS Radio Resource
Global System for Mobile Communication
Hybrid Automatic Repeat Request
Handover
Half Rate
HS-DSCH Radio Network Temporary Identity
High Speed Circuit-Switched Data
High Speed Downlink Packet Access
High Speed Downlink Shared Channel
Hopping Sequence Number
High Speed Packet Access
High Speed Physical Downlink Shared Channel
High Speed Shared Control Channel
High Speed Uplink Packet Access
Information Element
International Mobile Equipment Identity
Internet Protocol
Internet Protocol Control Protocol
Interference Signal Code Power
Joint Photographic Expert Group
Keyhole Markup Language
Key Performance Indicator
Location Area
Location Area Code
Latitude
Link Control Protocol
Logical Link Control
371
LON
LTE
LUT
M2M
MAC
MCC
MCS
MD5
MDM
MFER
MIMO
MIN
MM
MMS
MMSC
MN
MNC
MO
MOS
MRU
MS
MSM
MSTR
MT
MTR
MTU
MuxPDU
NBDS
NBNS
NCC
NDIS
NID
NMEA
NMO
NSAPI
NV
OFDM
OVHD
PA
PACA
PAP
PBCCH
372
Longitude
Long Term Evolution
Location Update Type
Mobile To Mobile
Medium Access Control
Mobile Country Code
Modulation Coding Scheme
Message-Digest algorithm 5
Mobile Diagnostic Monitor
Frame Error Rate after MPE-FEC decoding
Multiple Input Multiple Output
Mobile Identity Number
Mobility Management
Multimedia Messaging Service
MMS Center
Monitored Neighbor
Mobile Network Code
Mobile-originated
Mean Opinion Score
Mobile Receiving Unit
Mobile Station (may represent phone or scanner)
Mobile Station Modem
Mobile Station Time Reference
Mobile-terminated
Mobile Traffic Recording
Mobile Test Unit
Multiplex Sublayer Protocol Data Unit
NetBIOS Datagram Service
NetBIOS Name Service
Network Colour Code
Network Driver Interface Specification
Network Identification
National Marine Electronics Association
Network Mode of Operation
Network Service Access Point Identifier
Non Volatile
Orthogonal Frequency-Division Multiplexing
Overhead
Power Amplifier
Priority Access and Channel Assignment
Password Authentication Protocol
Packet Broadcast Control Channel
Appendix A. Abbreviations
PCCCH
P-CCPCH
PCH
PCI
PCIG
PCS
PDCH
PDP
PDU
PER
PESQ
PI
PID
PLMN
PN
POP3
PPCH
PPP
PPS
P-SCH
PSTN
QAM
QCELP
QOF
QPSK
RA
RAB
RAC
RACH
RAN
RAS
RAT
RATI
RB
RL
RLA
RLC
RLP
RNC
RP
RPC
RQ
373
RR
RRC
RRI
RS
RSCP
RSRP
RSRQ
RSSI
RTC
RTCP
RTP
RTSP
SACCH
SAN
SAPI
SC
SCC
SCH
SCH
SDCCH
SDP
SDU
SEGW
SF
SG
SGSN
SGW
SHO
SIB
SID
SID
SIM
SINR
SIR
SMS
SMTP
SMV
SNDCP
SNR
SPS
SQI
SS
374
Appendix A. Abbreviations
S-SCH
SSID
TA
TAB
TB
TBS
TCA
TCH
TCP
TDD
TDMA
TD-SCDMA
TFI
TIF
TLLI
TM
TPC
TS
TSC
TTI
UARFCN
UATI
UCD
UCS
UDP
UE
UL
UM
UMA
UMTS
UpPCH
URA
URI
USB
UTF
UTM
UTRAN
VID
VMR-WB
VSQI
VTQI
WAP
375
WCDMA
WiMAX
WLAN
WSP
XML
376
Index
Index
A
A/C/N Sets window (CDMA) 346
abbreviations 369
Active Set window (CDMA) 346
Adjacent Bar Chart (GSM) 364
AMR Call Average window (GSM) 349
AMR Cell Average window (GSM) 349
AMR Codecs window (WCDMA) 354
AMR Settings window (GSM) 349
AMR window (GSM) 349
B
bar charts, preconfigured 363
CDMA 363
GSM 364
LTE 364
TD-SCDMA 365
WCDMA 365
WiMAX 366
C
C/A window (GSM) 348
C/I window (GSM) 348
Call Analysis window 356
Candidate Set window (CDMA) 346
CDMA Bar Chart 363
CDMA Data Line Chart 359
CDMA information elements
in Data Collection 131
in Route Analysis 267
CDMA Line Chart 359
Cell Reselection window (TD-SCDMA) 352
Channel RSSI Bar Chart (WiMAX) 366
Channel RSSI Line Chart (WiMAX) 363
Compact Adjacent Bar Chart (GSM) 364
377
D
Data Bytes Sent/Received window (CDMA) 345
Data Bytes Sent/Received window (GSM) 347
Data Collection information elements 4
Data Reports window 357
data service testing information elements
in Data Collection 172
in Route Analysis 298
Data Session window (common to all technologies) 346, 347, 351, 353
Data Throughput window (GSM) 347
Data Timeslots window (GSM) 347
DVB-H Analysis window (WCDMA) 353
DVB-H Stats Line Chart (WCDMA) 361
E
EGPRS Line Chart 359
EGPRS Status window 348
Enhanced Power Scan Bar Chart (LTE) 364
Ericsson MTR Records window (GSM) 357
Error Reports window 357
EV-DO Forward Link Packets window 346
EV-DO Overview window 346
EV-DO Reverse Link Packets window 346
EV-DO Status window 346
Event Counter windows
preconfigured 356
Events window 358
events, listing of predefined 316
CDMA 337
data service testing 343
general events 316
GSM/WCDMA/TD-SCDMA 318
378
Index
F
Finger Info window (CDMA) 346
Finger Info windows (WCDMA) 354
G
GAN Status window (GSM) 350
GAN WLAN Quality Line Chart 360
GPRS Line Chart 360
GPRS Status window 348
GPS window (Route Analysis) 345
GSM information elements
in Data Collection 5
in Route Analysis 181
GSM Line Chart 360
GSM Neighbors window (WCDMA) 354
GSM uplink information elements
in Data Collection 176
H
Handover window (WCDMA) 354
Hopping Channels window (GSM) 350
HS UL E-TFC Accumulated
Sony Ericsson (WCDMA bar chart) 365
HS UL E-TFC Current
Sony Ericsson (WCDMA bar chart) 365
HS UL Output Power Line Chart 362
HS UL Transmission Distribution Accumulated
Sony Ericsson (WCDMA bar chart) 365
HS UL Transmission Distribution Current
Sony Ericsson (WCDMA bar chart) 365
HSCSD Throughput window 348
HSDPA Analysis MIMO window 353
HSDPA Analysis Per Process window 353
HSDPA Analysis window (TD-SCDMA) 351
HSDPA Analysis window (WCDMA) 353
HSDPA MIMO Primary Transport Block Size Bar Chart 365
HSDPA MIMO Secondary Transport Block Size Bar Chart 366
HSDPA PDSCH Codes Bar Chart 366
HSDPA Transport Block Size Bar Chart 366
HSUPA Analysis window 353
I
iDEN Line Chart 360
iDEN Messages window 357
379
380
Index
general 179
GSM 181
GAN 183
GPRS/EGPRS channel 185
GPRS/EGPRS measurement 189
low level data 193
MS behavior 196
neighbors 199
quality measurement 202
scan data 207
serving cell, channels 210
serving cell, interference 213
serving cell, measurement 217
WCDMA parameters measured in GSM mode 223
WCDMA 224
active set 224
data (PDP context) 225
GSM neighbor measurements in WCDMA mode 228
handover measurements 228
HSDPA 231
HSUPA 238
low level data 242
MS behavior 246
neighbors 248
network parameters 250
quality measurement 251
radio measurement 252
Rake finger information 226
SAN (serving cell/active set + neighbors) 255
scan data 256
serving cell 265
LTE category 3
support for in phones and scanners 302
CDMA 302
GSM 303
LTE 314
WCDMA 309
TD-SCDMA category 3
WCDMA category 3
WiMAX category 3
Interference Bar Chart (GSM) 364
Interference Line Chart (GSM) 360
381
L
Layer 2 Messages window 358
Layer 3 Messages window 358
line charts, preconfigured 359
CDMA 359
GSM 359
iDEN 360
LTE 360
TD-SCDMA 361
WCDMA 361
WiMAX 363
LTE information elements
in Data Collection 113
M
Map windows, preconfigured 367
message windows, preconfigured 356
analysis 356
GSM uplink data 357
iDEN 357
signaling 357
Missing Neighbor window 356
Mode Reports window 359
mode reports, plain-text decoding of 315
Modified MS Behavior window (GSM) 350
Modified MS Behavior window (WCDMA) 355
MTR information elements
in Data Collection 176
N
Narrowband Interference Scan Bar Chart (CDMA) 363
Neighbor Set window (CDMA) 346
Network Search window (WCDMA) 354
P
PDP Context window (GSM) 348
PDP Context window (TD-SCDMA) 351
PDP Context window (WCDMA) 353
PN Scan bar charts (CDMA) 363
382
Index
R
RACH Analysis window (WCDMA) 355
Radio Parameters Bar Chart (WCDMA) 366
Radio Parameters Parallel Bar Chart (WCDMA) 366
Radio Parameters window (CDMA) 347
Radio Parameters window (GSM) 350
Radio Parameters window (TD-SCDMA) 352
Radio Parameters window (WCDMA) 355
Radio Quality Bar Chart (GSM) 364
RAS 172
Remote Access Service (RAS) 172
RLC/MAC header data 41
Route Analysis information elements 179
RS bar charts (LTE) 364
RS line charts (LTE) 360
RSSI Scan Bar Chart (CDMA) 363
RSSI Scan Bar Chart (GSM) 364
RSSI Scan Bar Chart (LTE) 364
RSSI Scan Bar Chart (TD-SCDMA) 365
RSSI Scan Bar Chart (WCDMA) 366
RSSI Scan Bar Chart (WiMAX) 366
RSSI Scan Line Chart (LTE) 361
RSSI Scan Line Chart (TD-SCDMA) 361
RSSI Scan Line Chart (WiMAX) 363
S
Scanned Cells window (LTE) 351
Scanned Cells window (TD-SCDMA) 351
Scanned Preamble Index window (WiMAX) 356
SCH Timeslot Scan Bar Chart (WCDMA) 366
Segment Power Group Bar Chart (WiMAX) 366
Serving + Neighbor window (TD-SCDMA) 352
Serving + Neighbors By Band window (GSM) 350
Serving + Neighbors window (GSM) 350
Serving window (CDMA) 347
Serving/Active Set + Neighbors window (WCDMA) 355
383
T
TD-SCDMA HS/GSM Data Line Chart 361
TD-SCDMA information elements
in Data Collection 119
TD-SCDMA Line Chart 361
384
Index
U
Uplink Line Chart (GSM) 360
Uplink Neighbors window (GSM) 349
Uplink Radio Parameters window (GSM) 349
Uplink Serving Cell window (GSM) 349
V
Video Streaming Line Chart (GSM/WCDMA) 360, 362
W
WCDMA Handover Analysis window 356
WCDMA HSPA/GSM Data Line Chart 362
WCDMA information elements
in Data Collection 58
in Route Analysis 224
WCDMA Line Chart 362
WCDMA Rel. 99/GSM Data Line Chart 362
WCDMA RLC Data Line Chart 362
WCDMA Two Antennas Line Chart 362
WCDMA/GSM Line Chart 362
Weakest CINR Bar Chart (WiMAX) 367
Weakest Preamble Power Bar Chart (WiMAX) 367
WiMAX information elements
in Data Collection 164
Winsock 172
385