Beruflich Dokumente
Kultur Dokumente
BVS
Ball valve strainer
03/09
GENERAL OPERATION
The BVS is designed to protect condensate drains against large particles found in condensate.
The strainer inside the BVS will catch all these large particles.
The unit can be shut off from the compressed air system by closing the ball valve, enabling
easy and safe work to be carried out on the drain which is installed after the BVS without
depressurising the complete compressed air system.
SAFETY INSTRUCTIONS
SAFETY AND PROPER USAGE
To ensure safe and enduring performance of this product, you must comply strictly with the
instructions enclosed herein. Non-compliance with instructions or improper handling of the
product will void your warranty! Usage of this product in conditions not specified in this manual
or in contrary to the instructions hereby provided is considered IMPROPER. The manufacturer
will not be held liable for any damages resulting from improper use of the product.
Handle
BVS body
Strainer
Strainer cap
handle
BVS body
Strainer
Strainer cap
INSTALLATION INSTRUCTIONS
1. Unpack the unit and visually inspect for any
transport damage incurred after leaving our
factory.
IMPORTANT NOTICE
Before installing this product, make sure it
complies with your request and that it suits
your application!
Open
Close
CLEANING INSTRUCTIONS
To clean or service the BVS follow the following
easy steps.
Step 1: Turn the handle 90 to close the BVS.
SERVICE CHART
Date
Description
Name
TECHNICAL SPECIFICATIONS
Inlet connection size
Outlet connection size
BVS material
Seals
DIMENSIONS (MM)
59
97
O 24,5
31
76
105