Sie sind auf Seite 1von 18

Specifications and description

Leuze electronic

LS 85

Throughbeam photoelectric sensors


Dimensioned drawing

0 65m
10 - 30 V
DC

! Voltage ranges: 10 30VDC and 24VDC


! Light switching and delay before start-up for
optimal adaptation to applications
! Connection via M12 connector or standard
plug with screw connector up to 1.5mm

A
B

Electrical connection

ISO
9001
We reserve the right to make changes 85_a01e.fm

Indicator diode only at receiver


Optical axis

Transmitter
IEC 60947...

IEC 60947...

Receiver

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! M12 connectors (KD )
! Alignment aid ARH 2

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

LS 85 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
LS 85
Specifications

Tables

Optical data

Typ. operating range limit 1)


Operating range 2)
Light source
Wavelength

0 65m
0 50m
LED (modulated light)
880nm

Timing
Sensor switching frequency
Sensor response time
Delay before start-up

100Hz
2.5ms
200ms

Electrical data
Operating voltage UB
Residual ripple
Bias current
Switching output
Function characteristics
Signal voltage high/low
Output current

10 30VDC (incl. residual ripple)


15% of UB
30mA
PNP transistor output
light switching
(UB -2V)/ 2V
max. 100mA

Indicators
LED yellow

light path free, alignment aid

Mechanical data
Housing
Weight
Optics cover
Connection type

diecast aluminium
transmitter 350g, receiver 350g
glass
M12 connector or
standard plug with screw connector up to 1.5mm

Environmental data
Ambient temp. (operation/storage)
Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

3)

Diagrams

-20C +60C/-30C +70C


1, 2, 3
I, all-insulated (standard plug),
III, all-insulated (M12 connector)
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system
1)
2)
3)
4)

to prevent condensation on the optics (due to temperature


changes)

Typ. operating range limit: max. attainable range without performance reserve
Operating range: recommended range with performance reserve
-30C with operating voltage continuously applied
1=transient protection, 2=polarity reversal protection, 3=short circuit protection

Remarks
LS 85/4
Part No. 500 00246 (Tr)
Part No. 500 00248 (Re)

LS 85/4 L.1
Part No. 500 20263 (Tr)
Part No. 500 20264 (Re)

Order guide

metal
standard plug
M12 connector 1)

!
!

10 30VDC
PNP

!
!
!

Selection table

Order code "

Equipment #
Housing
Connection
Features
Voltage supply
Switching output
Dehumidification

!
!
!
!

1) not part of the delivery contents

LS 85 - 04

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85

Energetic diffuse reflection light scanner


Dimensioned drawing

0 0.3m
0 0.8m
0 2.0m
10 - 30 V
DC

! Wide voltage range 10 30VDC with PNP


switching output for PLC applications
! General light/dark switching, sensitivity
adjustment and delay before start-up
provide for optimal adaptation to the
application
! Connection via standard plug with screw
connector up to 1.5mm

A
B
C
D

Electrical connection

We reserve the right to make changes 85_c01e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Sensitivity adjustment
Indicator diode
Light/dark switching

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

RK 85/4 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85
Specifications

Tables

Optical data

Scanning range (white 90%)1)


Adjustment range
Light source
Wavelength

0 300mm, 0 800mm, 0 2000mm


5 100%
LED (modulated light)
880nm

Timing
Sensor switching frequency
Sensor response time
Delay before start-up

100Hz
2.5ms
200ms

Electrical data
Operating voltage UB
Residual ripple
Bias current
Switching output
Function characteristics
Signal voltage high/low
Output current
Sensitivity

10 30VDC (incl. residual ripple)


15% of UB
40mA
PNP transistor output
light or dark switching (reversible)
(UB -2V)/ 2V
max. 100mA
adjustable

Indicators
LED red
LED red flashing

reflection
reflection, no performance reserve

Mechanical data
Housing
Weight
Optics cover
Connection type

diecast aluminium
350g
glass
standard plug with screw connector up to 1.5mm

Diagrams

Environmental data

Ambient temp. (operation/storage) 2)


Protective circuit 3)
VDE safety class
Protection class
LED class
Standards applied

-20C +60C/-30C +70C


1, 2, 3
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system

to prevent condensation on the optics (due to temperature


changes)

1) Scanning range: recommended range with performance reserve


2) -30C with operating voltage continuously applied
3) 1=transient protection, 2=polarity reversal protection, 3=short circuit protection

! The upper and lower scanning range limits can


change with poorly reflecting materials.

RK 85/4-2000
Part No. 500 00496

Selection table

RK 85/4-800
Part No. 500 00495

Remarks
RK 85/4-300
Part No. 500 00494

Order guide

metal
300mm
800mm
2000mm
standard plug

!
!

!
!

10 30VDC
PNP

!
!
!

!
!
!

!
!
!

Order code "


Equipment #
Housing
Scanning range

Connection
Features
Voltage supply
Switching output
Dehumidification

RK 85/4 - 04

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
PRK 85

Retro-reflective photoelectric sensor with polarisation filter


Dimensioned drawing

7.5m
22-250 V
AC / DC

! All-mains design
22 250VAC/DC with relay output
! General light/dark switching and delay
before start-up for optimal adaptation to
applications
! Connection via standard plug with screw
connector up to 1.5mm

A
B
C

Electrical connection

We reserve the right to make changes 85_b04e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Indicator diode
Light/dark switching

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! Reflectors
! Reflective tapes

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

PRK 85/7 UC - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
PRK 85
Specifications

Tables

Optical data

Typ. operating range limit (TK(S) 100x100) 1)


Operating range 2)
Light source
Wavelength

7.5m
see tables
LED (modulated light)
660nm (visible red light, polarised)

Timing
Switching frequency
Response time
Delay before start-up

20Hz
25ms
200ms

Electrical data
Operating voltage UB
Power consumption
Switching output
Function characteristics
Switching voltage, relay
Switching current, relay
Switching power, relay

Reflectors

Operating
range

TK(S)
TK(S)
TK(S)
TK
Tape 2

100x100
50x100
50x50
82
100x100

0.3 6.0m
0.3 5.5m
0.3 4.5m
0.5 6.0m
0.4 3.5m

TK
TKS
Tape 2

= adhesive
= screw type
= adhesive

22 250VAC 50/60Hz
22 250VDC 10%
1.5VA
relay, 1 change-over contact
light or dark switching (reversible)
250VAC/DC
250VAC 3A/30VDC 3A
250VAC 50W
250VAC 60VA ind. load

Indicators
LED red
LED red flashing

light path free


light path free, no performance reserve

Mechanical data
Housing
Optics cover
Weight
Connection type

diecast aluminium
glass
350g
standard plug with screw connector up to 1.5mm

Diagrams

Environmental data

Ambient temp. (operation/storage) 3)


Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

-20C +55C/-30C +55C


1, 2, 3, 4
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system
1)
2)
3)
4)

to prevent condensation on the optics (due to temperature


changes)

Typ. operating range limit: max. attainable range without performance reserve
Operating range: recommended range with performance reserve
-30C with operating voltage continuously applied
1=transient protection, 2=polarity reversal protection, 3=short circuit protection for all outputs, 4=interference
blanking

Remarks

Order guide

PRK 85/7 UC - 04

Designation

Part No.

PRK 85/7 UC

500 21127

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
PRK 85

Retro-reflective photoelectric sensor with polarisation filter


Dimensioned drawing

7.5m
10 - 30 V
DC

! Wide voltage range 10 30VDC with PNP


switching output for PLC applications
! General light/dark switching and delay
before start-up for optimal adaptation to
applications
! Connection via standard plug with screw
connector up to 1.5mm

A
B
C

Electrical connection

We reserve the right to make changes 85_b03e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Indicator diode
Light/dark switching

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! Reflectors
! Reflective tapes

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

PRK 85/4 - 05

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
PRK 85
Specifications

Tables

Optical data

Typ. operating range limit (TK(S) 100x100) 1)


Operating range 2)
Light source
Wavelength

7.5m
see tables
LED (modulated light)
660nm (visible red light, polarised)

Timing
Switching frequency
Response time
Delay before start-up

200Hz
2.5ms
200ms

Electrical data
Operating voltage UB
Residual ripple
Bias current
Switching output
Function characteristics
Signal voltage high/low
Output current

Reflectors

Operating
range

TK(S)
TK(S)
TK(S)
TK
Tape 2

100x100
50x100
50x50
82
100x100

0.3 6.0m
0.3 5.5m
0.3 4.5m
0.5 6.0m
0.4 3.5m

TK
TKS
Tape 2

= adhesive
= screw type
= adhesive

10 30VDC (incl. residual ripple)


15% of UB
40mA
PNP transistor output
light or dark switching (reversible)
(UB -2V)/ 2V
max. 100mA

Indicators
LED red
LED red flashing

light path free


light path free, no performance reserve

Mechanical data
Housing
Optics cover
Weight
Connection type

Environmental data
Ambient temp. (operation/storage)
Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

diecast aluminium
glass
350g
standard plug with screw connector up to 1.5mm
3)

Diagrams

-20C +55C/-30C +55C


1, 2, 3, 4
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system
1)
2)
3)
4)

to prevent condensation on the optics (due to temperature


changes)

Typ. operating range limit: max. attainable range without performance reserve
Operating range: recommended range with performance reserve
-30C with operating voltage continuously applied
1=transient protection, 2=polarity reversal protection, 3=short circuit protection for all outputs, 4=interference
blanking

Remarks

Order guide

PRK 85/4 - 05

Designation

Part No.

PRK 85/4

500 00599

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85

Retro-reflective photoelectric sensors


Dimensioned drawing

6m
22-250 V

230 V

AC / DC

AC

! All-mains design
22 250VAC/DC with relay output
! Special voltages for universal application
! General light/dark switching and delay
before start-up for optimal adaptation to
applications
! Connection via standard plug with screw
connector up to 1.5mm

A
B
C

Electrical connection

We reserve the right to make changes 85_b02e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Indicator diode
Light/dark switching

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! Reflectors
! Reflective tapes

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

RK 85/7 - 05

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85
Specifications

Tables
RK 85/7
RK 85/7 UC

Optical data

Operating range 1)
Light source
Wavelength

see tables
LED (modulated light)
880nm

Timing
Switching frequency
Response time
Delay before start-up

20Hz
25ms
200ms

Electrical data
Operating voltage UB

22 250VAC (50/60Hz)
22 250VDC 10%
230VAC 10% 50/60Hz
1.5VA
relay, 1 change-over contact
light or dark switching (reversible)
250VAC/DC
250VAC 3A/30VDC 3A
250VAC 50W
250VAC 60VA ind. load

Power consumption
Switching output
Function characteristics
Switching voltage, relay
Switching current, relay
Switching power, relay

Reflectors

Operating
range

TK(S)
TK(S)
TK(S)
TK
Tape 2

100x100
50x100
50x50
82
100x100

0.3 6.0m
0.3 5.5m
0.3 4.5m
0.5 6.0m
0.4 3.5m

TK
TKS
Tape 2

= adhesive
= screw type
= adhesive

Indicators 2)
LED green
LED yellow
LED red flashing

ready
light path free
light path free, no performance reserve

Mechanical data
Housing
Optics cover
Weight
Connection type

diecast aluminium
glass
340g
standard plug with screw connector up to 1.5mm

Diagrams

Environmental data

Ambient temp. (operation/storage) 3)


Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

-20C +55C/-30C +55C


1, 2, 3, 4
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system

to prevent condensation on the optics (due to temperature


changes)

1) Operating range: recommended range with performance reserve


2) RK 85/7-10UC
LED red: receive indicator
LED red flashing: switching state (LEDs illuminate at interruption)
3) -30C with operating voltage continuously applied
4) 1=transient protection, 2=polarity reversal protection, 3=short circuit protection for all outputs,
4=interference blanking

Remarks

Order guide
RK 85/7
Part No. 500 00497

RK 85/7-10 UC
Part No. 500 21126

Selection table

metal
6m
standard plug

!
!
!

!
!
!

230VAC
22 250VAC/DC
special voltage
Relay

Order code "

Equipment #
Housing
Operating range
Connection
Features
Voltage supply

Switching output
Dehumidification

RK 85/7 - 05

!
!
!
!

!
!

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85

Retro-reflective photoelectric sensors


Dimensioned drawing

7.5m
10 - 30 V
DC

! Wide voltage range 10 30VDC with PNP


switching output for PLC applications
! General light/dark switching and delay
before start-up for optimal adaptation to
applications
! Connection via standard plug with screw
connector up to 1.5mm

A
B
C

Electrical connection

We reserve the right to make changes 85_b01e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Indicator diode
Light/dark switching

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! Reflectors
! Reflective tapes

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

RK 85/4 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
RK 85
Specifications

Tables

Optical data

Typ. operating range limit (TK(S) 100x100) 1)


Operating range 2)
Light source
Wavelength

7.5m
see tables
LED (modulated light)
880nm

Timing
Switching frequency
Response time
Delay before start-up

200Hz
2.5ms
200ms

Electrical data
Operating voltage UB
Residual ripple
Bias current
Switching output
Function characteristics
Signal voltage high/low
Output current

Reflectors

Operating
range

TK(S)
TK(S)
TK(S)
TK
Tape 2

100x100
50x100
50x50
82
100x100

0.3 6.0m
0.3 5.5m
0.3 4.5m
0.5 6.0m
0.4 3.5m

TK
TKS
Tape 2

= adhesive
= screw type
= adhesive

10 30VDC (incl. residual ripple)


15% of UB
40mA
PNP transistor output
light or dark switching (reversible)
(UB -2V)/ 2V
max. 100mA

Indicators
LED red
LED red flashing

light path free


light path free, no performance reserve

Mechanical data
Housing
Optics cover
Weight
Connection type

Environmental data
Ambient temp. (operation/storage)
Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

diecast aluminium
glass
340g
standard plug with screw connector up to 1.5mm
3)

Diagrams

-20C +55C/-30C +55C


1, 2, 3, 4
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system
1)
2)
3)
4)

to prevent condensation on the optics (due to temperature


changes)

Typ. operating range limit: max. attainable range without performance reserve
Operating range: recommended range with performance reserve
-30C with operating voltage continuously applied
1=transient protection, 2=polarity reversal protection, 3=short circuit protection for all outputs,
4=interference blanking

Remarks

Order guide
Retro-reflective photoelectric sensor

RK 85/4 - 04

Designation

Part No.

RK 85/4

500 00492

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
LS 85

Throughbeam photoelectric sensors


Dimensioned drawing

65m
230 V
AC

! AC version 230VAC with relay output


! Special voltages for universal application
! Light switching and delay before start-up for
optimal adaptation to applications
! Connection via standard plug with screw
connector up to 1.5mm

A
B

Electrical connection

We reserve the right to make changes 85_a02e.fm

ISO
9001

IEC 60947...

IEC 60947...

Optical axis
Indicator diode

IP 65

Transmitter

Receiver

Accessories:
(available separately)

! Mounting systems (BT 85)


! Alignment aid ARH 2

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

LS 85/7 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
LS 85
Specifications

Tables

Optical data

Typ. operating range limit 1)


Operating range 2)
Light source
Wavelength

0 65m
0 50m
LED (modulated light)
880nm

Timing
Sensor switching frequency
Sensor response time
Delay before start-up

20Hz
25ms
200ms

Electrical data
Operating voltage UB
Power consumption
Switching output
Function characteristics
Switching voltage, relay
Switching current, relay
Switching power, relay

230VAC 10% 50/60Hz


2.5VA/3VA
relay, 1 change-over contact
light switching
250VAC/DC
250VAC 3A / 30V DC 3A
250VAC 50W
250VAC 60VA ind. load

Indicators
LED yellow

light path free, alignment aid

Mechanical data
Housing
Weight
Optics cover
Connection type

Environmental data
Ambient temp. (operation/storage)
Protective circuit 4)
VDE safety class
Protection class
LED class
Standards applied

diecast aluminium
transmitter 460g, receiver 480g
glass
standard plug with screw connector up to 1.5mm
3)

Diagrams

-20C +60C/-30C +70C


1, 2, 3
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system
1)
2)
3)
4)

to prevent condensation on the optics (due to temperature


changes)

Typ. operating range limit: max. attainable range without performance reserve
Operating range: recommended range with performance reserve
-30C with operating voltage continuously applied
1=transient protection, 2=polarity reversal protection, 3=short circuit protection

Remarks

Order guide
Transmitter and receiver
Transmitter
Receiver

LS 85/7 - 04

Designation

Part No.

LS 85/7
LS 85/7 SE
LS 85/7 E

500 00250
500 00251

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
FRK 85

Diffuse reflection light scanner with background suppression


Dimensioned drawing

0.1 0.8m
10 - 30 V
DC

! Wide voltage range 10 30VDC with PNP


switching output for PLC applications
! General light/dark switching, sensitivity
adjustment and delay before start-up
provide for optimal adaptation to the
application
! Connection via M12 connector or standard
plug with screw connector up to 1.5mm

A Optical axis
B Indicator diode
C Scanning range adjustment
D Light/dark switching
Preferred entry direction for objects " + #

Electrical connection

We reserve the right to make changes 85_d01e.fm

ISO
9001

IEC 60947...

IEC 60947...

IP 65

Accessories:
(available separately)

! Mounting systems (BT 85)


! M12 connectors (KD )

Leuze electronic GmbH + Co. KG


www.leuze.de

Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730

FRK 85 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Leuze electronic
FRK 85
Specifications

Tables

Optical data

Scanning range (white 90%)1)


Adjustment range
Light source
Wavelength

100 800mm,
120 800mm
LED (modulated light)
880nm

Timing
Sensor switching frequency
Sensor response time
Delay before start-up

100Hz
5ms
200ms

Electrical data
Operating voltage UB
Residual ripple
Bias current
Switching output
Function characteristics
Signal voltage high/low
Output current

10 30VDC (incl. residual ripple)


15% of UB
40mA
PNP transistor output
light or dark switching (reversible)
(UB -2V)/ 2V
max. 100mA

Indicators
LED yellow on
LED yellow off

reflection
no reflection

Mechanical data
Housing
Weight
Optics cover
Connection type

diecast aluminium
340g
glass
M12 connector or standard plug with screw connector up
to 1.5mm

Diagrams

Environmental data

Ambient temp. (operation/storage) 2)


Protective circuit 3)
VDE safety class

Protection class
LED class
Standards applied

-20C +60C/-30C +70C


1, 2, 3
I, all-insulated (FRK 85/2-800, FRK 85/4-800)
III, all-insulated (FRK 85/4-800 L.1)
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system

to prevent condensation on the optics (due to temperature


changes)

1) Scanning range: recommended range with performance reserve


2) -30C with operating voltage continuously applied
3) 1=transient protection, 2=polarity reversal protection, 3=short circuit protection

Selection table

! With the set scanning


range, a tolerance of the
upper scanning range limit
is possible depending on
the reflection properties of
the material surface.

FRK 85/4-800 L.1


Part No. 500 21434

Remarks
FRK 85/4-800
Part No. 500 11203

Order guide

metal
800mm
standard plug
M12 connector 1)

!
!
!

!
!

10 30VDC
PNP

!
!

Order code $
Equipment %
Housing
Scanning range
Connection
Features
Voltage supply
Switching output

!
!
!

1) not part of the delivery contents

FRK 85 - 04

0512

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Specifications and description

RK 85

Energetic diffuse reflection light scanner

en 04-2010/07 50114050

Dimensioned drawing

0 0.3m
0 0.8m
0 2.0m
230 V
AC

We reserve the right to make changes DS_RK85_7_en.fm

z AC version 230VAC with relay output


z General light/dark switching, sensitivity
adjustment and delay before start-up
provide for optimal adaptation to the
application
z Connection via standard plug with screw
connection up to 1.5mm

A
B
C
D

Optical axis
Sensitivity adjustment
Indicator diode
Light/dark switching

Electrical connection
IEC 60947...

IEC 60947...

IP 65

Accessories:
(available separately)

z Mounting systems (BT 85)

Leuze electronic GmbH + Co. KG


info@leuze.de www.leuze.com

In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0

RK 85/7 - 04

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

RK 85
Specifications

Tables

Optical data
Scanning range (white 90%) 1)
Adjustment range
Light source
Wavelength

0 300mm, 0 800mm, 0 2000mm


5 100%
LED (modulated light)
880nm

Timing
Sensor switching frequency
Sensor response time
Delay before start-up

20Hz
25ms
200ms

Electrical data
Operating voltage UB
Power consumption
Switching output
Function characteristics
Switching voltage, relay
Switching current, relay
Switching power, relay

230VAC 10% 50/60Hz


4VA
relay, 1 change-over contact
light or dark switching (reversible)
250VAC/DC
250VAC 3A/30VDC 3A
250VAC 50watts
250VAC 60VA ind. load
adjustable

Sensitivity

Indicators
Red LED
LED green
LED yellow

no reflection, operating voltage connected


reflection, with performance reserve
reflection, no performance reserve

Mechanical data
Housing
Weight
Optics cover
Connection type

diecast aluminium
490g
glass
standard plug with screw connection up to 1.5mm

Diagrams

Environmental data

Ambient temp. (operation/storage) 2)


Protective circuit 3)
VDE safety class
Protection class
LED class
Standards applied

-20C +60C/-30C +70C


1, 2, 3
I, all-insulated
IP 65
1 (acc. to EN 60825-1)
IEC 60947-5-2

Options
De-humidifying system

to prevent fogging of the optics (temperature change)

1) Scanning range: recommended range with performance reserve


2) -30C with continuously applied operating voltage
3) 1=transient protection, 2=polarity reversal protection, 3=short circuit protection

z In the case of badly


reflecting materials, the
lower and upper scanning
limits may change.
z Approved purpose:
This product may only be
used by qualified personnel and must only be used
for the approved purpose.
This sensor is not a safety
sensor and is not to be
used for the protection of
persons.

RK 85/7-2000
Part No. 500 00517

Selection table

RK 85/7-800
Part No. 500 00512

Remarks
RK 85/7-300
Part No. 500 00507

Order guide

Metal
300mm
800mm
2000mm
Connectors

z
z

z
z

230VAC
Relay

z
z
z

z
z
z

z
z
z

Order code
Equipment
Housing
Scanning range

Connection
Features
Voltage supply
Switching output
Dehumidification

RK 85/7 - 04

2010/07

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Das könnte Ihnen auch gefallen