Beruflich Dokumente
Kultur Dokumente
Solutions for
Optical
Fibre
Telecommunications
Networks
Product Catalogue
Solutions for
Fibre
Optics
Optical fibres are fibres made of glass which transport a signal containing
several types of information at very high speeds in the form of pulses of light.
This technology allows very high data flows to be achieved, up to several tens of
Gigabits/second.
The use of optical fibre technology allows networks to be fed over long
distances with minimum losses. It also offers the advantage of being insensitive
to electromagnetic interference.
3M offer fibre optic solutions for the main types of networks for the longand short-distance markets:
from the fibre optic node (exchange) up to the subscriber point (interior
distribution device).
LAN : The equivalent of the VDI product for copper with RJ45 jacks, 3M lists
your Security Video systems. The products can be installed quickly and are easy
to use.
FTTX Solutions
Content
Page
Page
FTTX Solutions
Transport network
The transport network, also known as the access network, routes the fibres from the
access node to the street cabinet. High capacity fibre optic cables and splice protection
enclosure are used for this part of the network.
3M offers a full range of splice protection enclosures.
There are four criteria of selection:
- Network configuration: It is essential to know, whether configuration is of MID SPAN,
STRAIGHT JOINT, DERIVATION PONT or DISTRIBUTION TYPE.
The type of configuration involved will determine the front face of the housing.
- The environment: This criteria determines the necessary IP (Protection class) for the
housings. Locations with direct water exposure may need a higher IP class.
- The capacity: This relates to the number and type of splices at the point of connection
- The cables: This relates to cable characteristics such as the diameter, the number of
fibres and the structure.
The 3M range of splice protection units for the transport network
BPEO Size 4
Fibre capacity
Range cable diameter* (mm)
BPEO Size 3
BPEO Size 2
864
576
336
4 to 27
4 to 27
4 to 27
Volume (L)
57.9
23.8
17.3
IP Protection class
IP 68
IP 68
IP 68
* Depending on the configuration (transit or break out). Please refer to the product page for further information.
Fibre capacity
Range cable diameter* (mm)
BPEO Size 1
BPEO Size 0
QODC
PBO NG
144
144
48
24
48
3 to 18
3 to 20
3 to 18
4.2 to 11
5.6
4.8
<2
1.4
n.a*
IP 68
IP 68
IP 68
IP 68
IP 44
Volume (L)
IP Protection index
* Depending on the configuration (input or output). Please refer to the product page for further information.
Fibre capacity
Application
Type of housing
Cble de branchement
d'abonn
Kit de
raccordement
terrain
FibrlokTM
Pied d'immeuble
PBO T2
Adduction
de l'immeuble
Cble de distribution
verticale ou cble "riser"
Kit de raccordement
terrain FibrlokTM
Kit de prise
pr-cble 4FO
Botier
de distribution
de palier
Tous les 1
2 tages
PBPO 12/24
Kit de prise
pr-cble 4FO
Kit de
raccordement
terrain FibrlokTM
Kit de prise
pr-cble 4FO
Pied d'immeuble /
Point de distribution
PBPO 12/24
Adduction
de l'immeuble
PBO T2 V2
eDB
PBPO 24
NG Symmetric
PBPO/C
NG Symmetric
Wall Outlet
144
48
48
48
Building basement
Building basement
Floor
Floor
Splice
Suitable for
connectors
Splice
Suitable for
connectors
Suitable for
connectors
FTTX Solutions
Reference
Number
N501741A
N501487A
N501488A
N501489A
N501719A
N501714A
N501747A
N501751A
N501491A
N501492A
N501493A
N501494A
N501495A
N501496A
BPEO Size 4
72-slot
N501675A
Reference
Number
1
-
N721162A
N721163A
N721164A
N721165A
N721166A
12
2
N721171A
N721172A
N530129A
1
2
1
4
1
-
N721130A
N530129A
N721130A
N530128A
N721162A
N721163A
N721164A
N721165A
N721166A
10
1
-
N721172A
N721162A
N721163A
N721164A
N721165A
N721166A
16
N721171A
1
-
N721162A
N721163A
N721164A
N721165A
N721166A
13
2
1
-
N721172A
N530129A
N721162A
N721163A
N721164A
N721165A
N721166A
25
2
N721171A
N530128A
1
6
1
10
2
1
16
N721131A
N530129A
N721131A
N530128A
N530129A
N721130A
N530128A
1
6
1
10
2
1
16
N721131A
N530129A
N721131A
N530128A
N530129A
N721130A
N530128A
1
5
N501790A
N501791A
Splice protection
housing
Description
Reference
Number
Cassettes
Max No. of.
cassettes
Compatibility
Wall
support
Reference
Number
Support
molded into
4 x cassettes 1-step
N501741A
All part numbers
the housing
2 x cassettes 2-step
base
N501719A
N501714A
12 x cassettes 1-step
All part numbers N711599A
6 x cassettes 2-step
12 x cassettes 1-step
All part numbers N711599A
6 x cassettes 2-step
Description
Cassettes for G652.D and G657.A type fibre
Number Reference
of slots Number
N541106A
N541182A
N541113A
N541103A
N541155A
N541121A
N541104A
N541151A
N541108A
N541110A
N501751A
Support built
12 x cassettes 1-step
All part numbers into the body
6 x cassettes 2-step
of the housing
N501675A
72 x cassettes 1-step
All part numbers N711660A
36 x cassettes 2-step
FTTX Solutions
1 Exchange Solutions
RFO NG Optical Distribution Frame
> Description
The RFO NG is the new generation end-of-cable, connection modules and tray modules
for exchange optical distribution units
It is used for fibre distribution patchcord management on frames.
RFO NG exists in 12- or 6-drawers block with respective fibre capacities of
144 and 72 fibres.
Technical Information
Dimensions
Cable-head fitted with modules
Height
Width
Depth
12-drawer chassis
258 mm
290 mm
260 mm
6-drawer chassis
126 mm
290 mm
260 mm
Connection modules
Height
Width
Depth
18 mm
160 mm
185 mm
Weight
12-drawer chassis
4.96 kg
6-drawer chassis
2.42 kg
Materials
3M Tlcommunications offers free training to
allow you to take on projects with confidence.
Simply contact your area sales contact.
Training objectives:
Installing an optical distribution frame (ODF) from
the RFO NG range.
Content:
Installing an ODF in an exchange or a specific
network
Connecting an ODF to the network
Creating a client link between equipment and
the network
Duration: 2 hours
Location: 3M location or directly on site
10
Cable-head:
Modules:
Connectivity:
Pigtails:
Splices:
Capacity
6
8
11
Number of ports
864
1152
1584
6-drawer chassis
Capacity
12
16
22
Number of ports
864
1152
1584
1 Exchange Solutions
Composition of the RFO NG system
DEECAM Break-out module
Frames
Chassis
Module
Ordering Information
Description
RFO NG II - 12-drawer chassis 144 fibres (without module)
RFO NG - 6-drawer chassis 72 fibres (without module)
Description
RFO NG II Mod 12 Pigt. SC/APC G652D 250
RFO NG - Pre wired module 12 SC/UPC G652D
RFO NG - Pre wired module 12 SC Multi-mode OM3
RFO NG Symetric - Prewired Module 12 SC/APC G652
Protective patchcord holder for RFO NG symetric tray
Reference No.
MOQ
N711842A
N711748A
1
1
Reference No.
MOQ
N541229A
N541181A
N541199A
N541193A
N671317A
12
12
12
12
12
Reference No.
MOQ
N711865A
N711866A
N711867A
1
1
1
Reference No.
MOQ
N581203A
N581207A
1
1
Reference No.
MOQ
N711547A
N711597A
1
1
For other variations of RFO NG modules, please contact your local 3M representative.
Description
RFO NG II FRAME 6 LEVELS H = 2 M
RFO NG II FRAME 8 LEVELS H = 2,5 M
RFO NG II FRAME 11 LEVELS H = 3,25 M
Description
RFO NG - 1000 m reel of tube D5/3
RFO NG - 25 m reel of tube D5/3
Description
RFO NG - Breakout Housing DEECAM D18 for 24 D5/3
RFO NG - Breakout Housing DEECAM D25 for 60 D5/3
11
FTTX Solutions
The Dome Closure BPEO Size 4 fibre-optic splice protection is IP68 watertight.
It is used to protect splices in underground or overhead installations with the capability
of being fixed horizontally or vertically in a manhole.
The FDC 12S meets high fibre-capacity requirements; up to 864.
A
A - Valves
B - Closures
C - Hooks
D - Dual port ECAM D4-27
E - 5 single port ECAM S4-27
F - Earthing kit
G - Closures
C
E
B
F
B
The BPEO Size 4 can be equipped with a dual ECAM D4-27 and 5 single ECAM S4-27. These entries allow
micro-sleeve cables to be introduced with a maximum diameter of 27 mm.
Characteristics
Advantages
Volumes: 57.9L
Cable diameters: 4 to 27 mm
Configurations:
- 1 Double port for ECAM D4-27
- 5 Single ports for ECAM S4-27
Technical Information
Dimensions in mm (L x H) :
658 x 335
864 fibres
Cassette:
Base material:
Plastic
Closure system:
Steel lock
280 mbar
Ordering Information
12
Description
BPEO Size 4 Dome Sleeve
BPEO Size 4 - Dome Sleeve for 864 FO max One double entry D4 - 27 + 5 x single entries D4 - 27
Reference No.
MOQ
N501675A
Description
Reference No.
MOQ
ECAM
ECAM Double D4-27 for BPEO Size 4 - One double entry D4 - 27
ECAM-27MM-D
ECAM-27MM-S
Description
Support
Wall support
Reference No.
MOQ
N711660A
The BPEO size 3 is an IP 68 watertight splice protection closure which allows the
splicing of up to 288 each Fibrlok 2540-G mechanical splices or 576 each
fusion splices.
The BPEO size 3 organiser is a 48-slot unit. Transit fibres in uncut loose tubes or
micro tubes can be stored behind the cassette support.
Characteristics
Advantages
Volumes: 23.8L
Simplified opening/closure
Cable diameters: 4 to 27 mm
Configurations:
- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
Technical Information
Sealing:
IP68
Impact:
Tensile:
341
Housing only
149
Depth
Wall mounted
154
Post/wall
178
Underground
149
Distribution BDP
Drivation primaire
primaire CDP
CDP
Drivation
Drivation primaire CDP
Drivation secondaire
secondaire EDP
EDP
Drivation
Key:
Branchement FDP
Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
13
FTTX Solutions
BPEO Size 3
BPEO-3 EVOL CDP 48 SLOT
Splice protection closure CDP
N501494A
N501495A
N501496A
Description
N721126A
10
N721127A
10
N721130A
N721131A
Description
N721140A
10
N721141A
10
N721142A
N721146A
10
10
Description
BPEO Cassettes
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion
splices and PLC splitter
N541104A
10
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G
mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G
mechanical splices
N541108A
10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea
Fibrlok 2540-G mechanical splices
N541110A
10
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
Description
Fixing support and adaptor kit
N711440A
N711546A
N711600A
N711604A
20
N711605A
20
N151064A
10
14
The BPEO Size 2 is a watertight splice protection closure which allows splicing of up
to 168 each Fibrlok 2540-G mechanical splices or 336 each fusion splices.
The size 2 organiser is a 28 slot unit. Transit fibres in uncut loose tubes or micro tubes
can be stored behind the cassette support.
Max capacity: 336 Fibres
Volumes: 17.3L
Cable diameters: 4 to 27 mm
Configurations:
- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
Characteristics
Advantages
Simplified opening/closure
Technical Information
Sealing:
IP68
Impact:
Tensile:
341
Depth
Housing only
149
Wall mounted
154
Post/wall
178
Channel
149
Distribution BDP
Drivation primaire
primaire CDP
CDP
Drivation
Drivation primaire CDP
Branchement FDP
FDP
Branchement
Key:
Branchement FDP
15
FTTX Solutions
BPEO Size 2
BPEO-2 EVOL CDP 28 SLOT
Splice protection housing CDP
N501491A
N501492A
N501493A
Colour code for compatibility between front faces BPEO (CDP, EDP and BDP) and ECAM versions
Description
N721126A
10
N721127A
10
N721130A
N721131A
Description
N721140A
10
N721141A
10
N721142A
N721146A
10
10
Description
BPEO Cassettes
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion
splices and PLC splitter
N541104A
10
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G
mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G
mechanical splices
N541108A
10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea
Fibrlok 2540-G mechanical splices
N541110A
10
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
Description
Fixing support and adaptor kit
N711440A
N711546A
N711600A
N711604A
20
N711605A
20
N151064A
10
16
Characteristics
Advantages
Volumes: 5.6L
Simplified opening/closure
Technical Information
Sealing:
IP68
Impact tests:
Length
382
Colour
Black
Material
Thermoplastic
Splicing capacity
Width
204
Depth
120
FDP Drops
17
FTTX Solutions
Reference No.
MOQ
N501747A
N501751A
Reference No.
MOQ
N721162A
10
N721163A
10
N721164A
10
N721165A
10
N721166A
10
N721162B
10
N721176A
10
Description
Double ECAM
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on the
diameter of cable required (from 6 to 18 mm).
Description
Reference No.
MOQ
N721171A
100
N721172A
60
N721126A
10
N721129A
10
Reference No.
MOQ
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support
12 fusion splices
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
N541103A
20
N541108A
10
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
Single ECAM
Description
BPEO Cassettes
18
Advantages
Simplified opening/closure
Volumes: 4.8L
Cable diameters: 3 to 20 mm
Configurations:
- EOC (Straight joint)
- CDP (Primary branch)
- EDP (Branch)
- FDP (Branch)
- FDP (Drops)
Technical Information
Sealing:
IP68
Impact:
Tensile:
204
Housing only
92
Depth
Wall mounted
97
Pole mounted
128
Channel
97
Number of slots: 12
Joint Droit
Droit EOC
EOC
Joint
EDP Branch
Drivation primaire
primaire CDP
CDP
Drivation
Drivation primaire CDP
Drivation secondaire
secondaire EDP
EDP
Drivation
Branchement FDP
FDP
Branchement
Key:
Branchement FDP
Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
New configurations
FDP Branch
FDP Drops
19
FTTX Solutions
Reference No.
N501487A
N501488A
N501489A
N501719B
N501714A
MOQ
1
1
1
1
1
Colour code for compatibility between front faces BPEO and ECAM versions
Description Double ECAM
Reference No.
MOQ
N721162A
10
N721163A
10
N721164A
10
N721165A
10
N721166A
10
N721130A
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on
the diameter of cable required (from 6 to 18 mm).
Description Single ECAM Evolution
Reference No.
MOQ
N721171A
100
N721172A
60
N721126A
10
N721127A
10
Reference No.
N721140A
MOQ
10
N721141A
10
N721142A
N721146A
10
10
Reference No.
MOQ
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
N541103A
20
N541108A
10
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
Reference No.
MOQ
N711438A
N711599A
N711604A
20
N711605A
20
20
Characteristics
Advantages
Compact
Sealed and mechanical closure
No flame, no resin
No special tools
Technical Information
Overall Dimensions:
295 x 83 x 55 mm
Material:
Thermoplastic body
Overall Volume:
1.35 L
Fastenings:
stainless steel
Colour:
Black
Fixing:
2 screws -diameter 6 mm
(not supplied)
QODC configurations
Cable entries:
Derivation:
7 x 2.20 metres in storage beneath the cassette if used as spur on standard cables
Splices:
Splitter:
Ordering Information
Description
Empty micro-sleeve for transit cable
diameter 4.2 mm or 11 mm. Plugs on outlets
Micro-sleeve 24 for transit cable
diameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets
Reference No.
MOQ
N501600A
13
N501604A
10
21
FTTX Solutions
Its double port and its 14 single ports cover all applications, depending on the
topography of the zone (residential, mixed or building).
The BPEO Size 0 has also been designed to be used in other FTTH branch applications
(aerial, on pole, or on walls) or in any type of location.
Characteristics
Advantages
Quick to install
Technical Information
Dimensions (Outside ECAM in mm) : Length
239
Width
222
Depth
84
Splicing capacity
Material
Thermoplastic
Colour
Black
Sealing:
IP68
22
Reference No.
MOQ
N501741A
10
Reference No.
MOQ
N721162A
10
N721163A
10
N721164A
10
N721165A
10
N721166A
10
N721162B
10
N721176A
10
Reference No.
MOQ
N721171A
100
N721172A
60
N721126A
10
Reference No.
MOQ
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
N541103A
20
N541108A
10
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
Description
Double ECAM
Double ECAM Body D6-18 for cable entry kit
Body for housing the double cable entry kits
Description
Single ECAM
Single ECAM S3-7 mm
Single cable entry kit with diameter from 3 to 7 mm
Description
BPEO Cassette
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
23
FTTX Solutions
Allowable cables:
1 or 2 branches per tube
Sealing gel
Characteristics
Advantages
Compact
Sealed and mechanical closure
No flame, no resin
No special tools
IP67 / IK09
No special tools
Perfect for overhead applications
Technical Information
Sealing:
IP 67
Materials:
Thermoplastic
Colour:
Black
Using ties
Fixing:
Range of cables:
Ordering Information
Description
24
Reference No.
MOQ
N501425A
25
N501454A
25
N501426A
10
N501652A
10
Characteristics
Advantages
Pre-connectorzed
Ruggadized design
Reliable solution
Technical Information
Closure Dimensions: 240 x 225 x 80 (H x W x D) mm
Protection Class: IP 65
Max. Number of drops: 8 SC/APC Hard Connect
OD of uncut feeder: 4.5-18 mm
1 Splice tray, 10 mm: For 12 fusion splices
Ordering Information
Description
BPEO S0 ECAM Connect C1
Aerial Closure for external Drop Connectivity
8 port SC/APC
Reference No.
MOQ
N501818A
1 ea
For ECAM Connect Drop Cables and Field Connectivity please contact your local 3M repesentative
or your 3M products sales channel.
www.3MTelecommuincations.com/eu
25
FTTX Solutions
Advantages
Pre-connectorzed
Ruggadized design
Reliable solution
Technical Information
Closure Dimensions: 335 x 205 x 144 (H x W x D) mm
Protection Class: IP 65
Max. Number of drops: 12 SC/APC
Number of branch cables: 2 ea with 4-12 mm
OD of uncut feeder: 5-18 mm
Splice trays: 2ea 10 mm hight, 4 ea 5 mm hight
Ordering Information
Description
BPEO S1,5 ECAM Connect C1
Aerial Closure for external Drop Connectivity
12 port SC/APC
Reference No.
MOQ
N501850A
1 each
For ECAM Connect Drop Cables and Field Connectivity please contact your local 3M repesentative
or your 3M products sales channel.
www.3MTelecommuincations.com/eu
26
The cables are anchored inside the housing on a strain relief bar.
The organiser and cassettes are the same standard as that found in our various sealed
closures and boxes.
This ensures that the internal organisation of our housings are multi-purpose.
For locking mechanism, contact 3M.
Characteristics
Advantages
Discrete
Accessibility
Technical Information
Dimensions (mm)
Height: 213
Width: 240
Depth: 73
Materials: Thermoplastics
Colour: Light Grey RAL 7035
Degree of Protection: IP 44 / IK 06
Dielectric strength for Greater than 4 kV
fixing on common supports
Cable entries / Anchorage in bottom box entrance. Capable of mid span access cables.
Anchorage and sealing for 1 to 2 feeder cables and 12 subscriber drops
Ordering Information
Description
Reference No.
MOQ
N501733A
N711608A
27
FTTX Solutions
Max capacity:
12 fibres
Characteristics
Advantages
Compact
1 tray holder
Technical Information
Dimensions: 130 x 190 x 45 mm
Materials:
Polycarbonate housing
EPDM port
Colour:
RAL 7035
Sealing:
IP 54
Impact:
IK08
Fire:
UL 94 5V
Ordering Information
Description
Empty FTB distribution housing
28
Reference No.
MOQ
FTB-M
Characteristics
Advantages
Configuration:
- 1 service cable including passage
- 16 branch cables (drops)
Robust product
Splitter management
Fusion and mechanical splices
Installation on walls, on pole, indoor, outdoor
Components for diameter from 4 to 12 mm
Technical Information
Dimensions (mm)
Height: 400
Width: 255
Depth: 86
Materials: Thermoplastics
Degree of protection (EN 60 529): IP55 / IK 06
Colour: Cover light grey Ral 7035
Body dark grey Ral 7037
Capacity:
Fusion splice
144 with 12 per 1-step cassette
Fibrlok splice 4 x 4 72 with 12 per 2-step cassette
Splitter
6 x 1/8 or 3 x 1/16 or 2 x 1/32
Anchorage of cables
Ordering Information
Description
Reference No.
MOQ
N501659A
N711608A
FTTX Solutions
The eDB is a fibre optic distribution box designed for installations at the base of
buildings and on floor landings.
This housing is modular and has a wide range of accessories in order to meet the needs
of various fibreoptics applications
The eDB is an ideal FTTH distribution point with its 48-fibre capacity.
It is also suitable to create a multi-operator mutualisation point.
Equipped with the BPEO organiser, this product provides a management system for
mechanical splices and splitters.
This housing is made up of 2 separate compartments to ensure the best possible
protection for splices and splitters. It may also be equipped with SC/APC connection
systems and with drops.
The eDB offers the option of installation in the form of a cascade. The in-line
configuration meets high-capacity fibre requirements.
eDB Base Assembly
Accessory Pack 1
1 x 6 x 13 Cable Entry
1 x Cable Slack Drum
1 x Rear Entry
2 x Patch field 12 x SC
2 x Cable Entry 10x5mm
1 x Splitter holder
2 x PAS II empty
2 x Splice Holder Heat shrink
2 x Splice Holder Crimp
4 x Strain Relief black
2 x Label 1-12 und 13-24
2 x Flex Bridge
1 x Inner Cover incl. holder etc.
Characteristics
Advantages
Technical Information
Characteristics
FO Capacity
Fusion splices
Mechanical splices
48
24
Cassettes
4
4
Cable
20 drops with a maximum diameter of 5 mm
2 main cables with a maximum diameter of 13 mm
Dimensions (mm)
Height: 320
Width: 248
Depth: 50
Materials: Thermoplastics
Colour: Body and cover Ral 7035
Degree of protection (EN 6529): IP 55 / IK 06
Ordering Information
30
Description
Reference No.
52-500-00000
1 ea
Accessory Pack 1
52027-544 00
1 ea
Accessory (Dropfix)
52031-600 00
50 ea
For individual project adaptations of the eDB2 please contact your local 3M representative.
MOQ
Floor Box
The PBPO 24 is a genuine interface between vertical distribution and subscriber connection cables.
Installation on standard cables and window cut riser cables.
Composition:
A zone in which the vertical cable passes, with two anchorages
A zone for coiled stowage of fibres and microtubes, passing or awaiting use
A BPEO Evolution generation 4-step organiser
A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters
Capacity from 12 to 48 splices
The PBPO 24
The PBPO 24 is equipped with 12 ports for 12 to 24 drop cables. The cables are anchored on external pin
brackets in front of the sealing partition, using ties.
Characteristics
Advantages
4-slot capacity
Technical Information
Dimensions (mm)
Height: 204
Width: 158
Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting on stretched cable, standard cable as spur, or junction of two cables
Allowable cable diameters
- Main: 13.5 mm
- Branch: 4.5 mm
Cable immobilisation:
Main: on 2 cradles (2 ties + 2 force restraints)
Branches: 12 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections:
4-step organiser to accept the entire range of BPEO cassettes
Management of non-sleeved fibres
Large storage zone for fibres and micro-tubes
Maximum capacity 48 fusion type splices
Ordering Information
Description
Reference No.
MOQ
N501758A
10
N711833A
10
Protection Cover
N681288T
10
31
FTTX Solutions
Capacity
from 12 to 48 splices
Support plate for 16 connectors of connection type SC/PC or SC/APC
Characteristics
Advantages
Cable diameter:
13.5 mm for main cable
4.5 mm for branched cable
Configuration:
For 16 SC simplex couplings
4-slot capacity
Technical Information
Dimensions (mm)
Height: 204
Width: 158
Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting in stretched cable, standard cable as spur, or junction of two cables
Allowable cable diameters
- Main: 13.5 mm
- Branch: 4.5 mm
Cable immobilisation:
- Main: on 2 cradles (2 ties + 2 force restraints)
- Branched: 16 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections:
4-step organiser to accept the entire range of BPEO cassettes
Management of non-sleeved fibres
Large storage zone for fibres and micro-tubes
Maximum capacity 48 fusion type splices
Ordering Information
Description
32
Reference No.
MOQ
PBPO/C NG Symetric
N501760A
10
N711833A
10
Protection Cover
N681288T
10
Characteristics
Advantages
Configurations:
- Outlet with 2 pre-terminated SC/APC
connectors/couplings to a 2 fibre cable
- Outlet with 2 pre-terminated SC/APC
connectors/couplings to a 4 fibre cable
- Outlet with 4 pre-terminated SC/APC
connectors/couplings to a 4 fibre cable
- Outlet with 4 SC/APC couplings and
2 SC/APC pigtails
- Outlet with 4 SC/APC couplings
Fixing strip
Design: compact
Technical Information
Dimensions (mm)
Height: 82.5
Width: 100
Overall thickness: 30,8
Thickness / Rail : 25
Materials: Thermoplastics
Colour: White- RAL9010
Connection system: SC/APC
Splice support: For 4 mechanical splices, fusion splices or both
33
FTTX Solutions
Ordering Information
Description
Wall outlet equipped with 4 shuttered SC/APC couplings
Wall outlet equipped with 4 shuttered SC/APC couplings
and 2 SC/APC pigtails
Wall outlet equipped with 4 shuttered SC/APC couplings with
4 pre-terminated SC/APC connectors to a 4 fibre cable, 25 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
4 pre-terminated SC/APC connectors to a 4 fibre cable, 40 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 4 fibre cable, 25 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 4 fibre cable, 40 m
Wall outlet equipped with 2 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 2 fibre cable, 25 m
Wall outlet equipped with 2 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 2 fibre cable, 40 m
34
Reference No.
MOQ
N501689A
10
N501677A
10
N501762A
N501763A
N501680A
N501681A
N501682A
N501683A
Characteristics
Advantages
Capacity: 2 fibres
Format 106 x 83 x 24 mm
Compact housing
Design
Multi-purpose
2 labelling zones
Technical Information
Description: Wall Outlet 2 FO
Dimensions (in mm)
Height: 83
Width: 106
Overall thickness: 24
Materials: Thermoplastics
Colour: White- RAL9010
For subscriber cable max diameter 6 mm
Connection: 2 optical connections to SC/APC standard
Splice support: For 2 mechanical splices or 4 fusion splices
Make-up of equipment supplied: Base, cassette, cover, cable immobilisation
Stowage: 1 metre of 900 m fibre
Fixing: Wall mounted or on flush-mounted housing using 2 screws
Protection index: IP40
Port protection: SC/APC shuttered couplings
Ordering Information
Description
Reference No.
MOQ
N501752A
24
N501753A
24
N501754A
24
35
FTTX Solutions
Specifications
Dimensions:
86 x 86 x 35 mm (WxLxD)
Capacity:
Connectivity:
Cable:
Cable entry:
Fixation:
Additional features:
Ordering Information
Description
Fibre Optic Wall Outlet 4 x SC simplex with additional port for RJ45 jack
36
Reference No.
MOQ
8686
10
Specifications:
Dimensions:
86 x 86 x 27 mm (W x L x D)
Capacity:
Connectivity:
Cable:
Cable entry:
Ordering Information
Description
Fibre Optic Wall Outlet with two RJ45 port adapters for 2 x SC simplex
or 2 x LC duplex with dust shutters
Reference No.
MOQ
VOL-0256-C
20
37
FTTX Solutions
5 FTTH Connectivity
5.0 Easy Cleaver
Latest cutting edge innovation from 3M
The 3M Easy Cleaver is the latest cutting edge innovation from 3M. Unlike other
fiber cleavers, which can cost hundreds or even thousands of dollars up-front, the
3M Easy Cleaver is conveniently included* with select packages of 3M No Polish
Connectors, 3M Crimplok+ Connectors and 3M Fibrlok II Splices.
Compared to many other blade-enabled fiber cleaving tools, the 3M Easy Cleaver
requires virtually no maintenance because of its diamond wire cleaving mechanism.
The 3M Easy Cleaver is capable of repeatedly creating smooth end faces and is
designed to perform approximately 120 cleaves per tool. A handy counter helps track
the number of cleaves performed.
*3M Easy Cleaver is included in select packages of 3M connectors and splices for a nominal increase in price.
Characteristics
Advantages
Specifications
Dimensions: 133 x 68 x 29.5 mm (5.24 x 2.68 x 1.16 in) approx.
Weight: 62 gm (2.2 oz) approx.
Compatible fibers:
Buffered: 250 m / 900 m tight buffer
Jacketed Cable: Up to 3 mm
Drop Cable: 1.6 x 2 mm and 2 x 3 mm FRP
Cleave angle: Typically less than 3
Cleave lengths: 8 - 24 mm (Specific cleave length markings are 8, 10, 12.5, 19, 20 and 24 mm)
Strip lengths: 42-58 mm
Cleaver life: Approximately 120 cleaves*
Performance: Flat cleave: 3M field-installable connectors and splices perform to their individual
specifications when terminated with the 3M Easy Cleaver if Easy Cleaver is used
per 3M instructions.
38
5 FTTH Connectivity
5.1 NPC Connectors
Quick and Easy connectivity for the Last Mile
Pre-assembled mechanical splice-on connectors
3M No Polish Connectors (NPC)
3M No Polish Connectors (NPC) help enable fast, on-site installation of 250 m,
900 m and jacketed single-mode and multimode fiber and cable
One piece, pre-assembled design
Factory polished, no field polish
Integrated mechanical splice element
No loose parts
Ideal for FTTP drop termination
Quick installation no electrical power
Activation tool included
Integrated strain relief for 900 m buffer
SC/APC and LC/APC also available with flat or keyed angle splicing
Re-opening tool incl. for reusability
Training videos online
Compatible with common SM fibres (ITU.G652.D, G657A)
Multimode
6800-50/LOMMF
6800-62.5
Single-mode
8800
0.2 dB
0.2 dB
0.2 dB
0.3 dB
< -30 dB
< -30 dB
< -25 dB
< -40 dB
Connector durability
Operating temperature
-40 C to 75 C
-40 C to 75 C
-40 C to 75 C
-40C to 75C
Material
Connector ferrule
Connector housing and body
Boot
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Flame retardancy
UL-94 V-O
UL-94 V-O
UL-94 V-O
UL-94 V-O
Connector identification
Backbone
Housing
Boot
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
8865-C
8865-C
8865-C
8865-C
39
FTTX Solutions
5 FTTH Connectivity
NPC APC - Specifications
Fiber diameter:
Insertion loss:
Reflection
(Flat splice):
(Angle splice):
Connection durability, after 100 matings:
Operating Temperature:
Cable tension (In service):
Side Pull (In service):
Water immersion, 43C (109F), 3 days:
Dimensions:
125 m
0.3 dB typical
-55 dB typical at room temperature
< -35 dB for -40 C to 75 C
-65 dB typical at room temperature
< -60 dB for for -40C to 75C
< 0.2 dB change
-40 C to 75 C (8832-APC -10C to 60C)
< 0.5 dB increase at 4.9N for 250 m
< 0.5 dB increase at 6.9N for 900 m
< 0.5 dB increase at 6.9N for 900 m
< 0.2 dB increase after 24 hour dry time
12.7 x 12.7 x 49 mm
Ordering Information
Description
Reference No.
MOQ
8800-APC/AS
60
8800-APC/FS
60
8802-T/APC/
FS/1.6-3.0
8802-T/APC/
AS/1.6-3.0
8830-APC/AS
60
8830-APC/FS
60
8832-APC/AS
60
8832-APC/FS
60
60
60
Ordering Information
Description
Reference No.
MOQ
8865-C
8865
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool
2565
40
5 FTTH Connectivity
5.2 Crimplok + Connectors
Quick and Easy connectivity for the Last Mile
No Splice - No Gel mechanical grip-on connectors
3M Crimplok + Connectors
3M Crimplok + Connectors help enable fast, on-site installation of 250 m
and 900m singlemode and multimode fiber and cable
One piece, pre-assembled design
No splice - No gel
Integrated mechanical grip element
No loose parts
Ideal for FTTP drop termination
Quick installation no electrical power
Quick field polish with Nano Finisher
Polishing film comes with each connector
Activation tool included
SC/PC and SC/APC
Training videos online
Compatible with all SM fibres
MM
6700-50/LOMMF
MM
6700-62.5
SM
8700-UPC / 8700-APC
Reflection (dB)
< -30
< -30
< -30
Connector durability,
after 500 matings
Operating temperature
-10 C to 60 C
-10 C to 60 C
-10 C to 60 C
-40 C to 75 C
Black/White
Aqua/White
Beige/White
Blue/White (UPC)
Green/White (APC)
8765-UPC
8765-UPC
8765-UPC
8765-UPC (UPC)
8765-APC (APC)
Ordering Information
Description
Reference No.
MOQ
8700-PS/UPC
60
8700-PS/APC
60
41
FTTX Solutions
5 FTTH Connectivity
3M Crimplok + Termination Kits
Enable fast, on-site installation of 250 m and 900 m singlemode and multimode fibre
Special kits for SC/PC and SC/APC
Standard flat cleaver
Nano Finisher included
Protrusion setting tool (PS tool) included
Ordering Information
Description
Reference No.
MOQ
8765-UPC
8765-APC
42
5 FTTH Connectivity
5.3 Fibrlok Mechanical Splices
Quick and Easy splicing for the Last Mile
3M Fibrlok Mechanical Splices
3M Fibrlok Mechanical Splices help enable fast, on-site splicing of 250 m
and 900 m single-mode and multimode fiber
Specifications
Fiber diameter:
Coating diameter:
Mean insertion loss:
Reflectance:
Tensile strength:
Material:
Operating temperature:
Thermal cycling:
Fungus resistance:
Vibration:
Water immersion:
Extended high humidity:
125 m
250 or 900 m
< 0.1 dB
< -35 dB from -40 to 80 C
< -60 dB typical at room temperature
4.4N minimum; 13.2N typical
Engineering thermoplastic with aluminium alloy element; UL 94, V-O rating
-40 to 80 C
Change in insertion loss < 0.5 dB, -40 to 80 C
ASTM G-21-70; rating 0
IEC 61300-2-1 (EIA standard FOTP-11; test condition 1)
Seven days at 43 C; change in insertion loss 0.05 dB;
21,000 hours with < 0.2 dB change
8,812 hours at 85 C, 85% humidity with < 0.2 dB change
Ordering Information
Description
Reference No.
MOQ
2529
60
2529-AS
60
2540-G
60
2540-AS
60
Ordering Information
Description
Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G
and Fibrlok samples
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G
and Fibrlok samples
Reference No.
MOQ
2559-C
2559
43
FTTX Solutions
5 FTTH Connectivity
5.4 Fibrlok Indoor FRP Splice Connector
Quick and Easy splicing of FRP drop cable
3M 2569 Indoor FRP Splice Connector
3M 2569 Indoor FRP Splice Connector help enable fast, on-site splicing of 2 x 3 mm
FRP 1 fibre indoor drop cable
One piece, pre-assembled design
Splice element compensates fibre OD tolerances
Flat- and angle splice version for high return loss
Quick and easy inline splicing of 2 x 3 mm FRP drop cable
Perfect strain relief due to aramide clamping
Two colours, grey and ivory
Specifications
Appplication:
Indoor application
Dimensions:
9 x 82 mm ( x L)
Cable type:
Insertion loss:
0.1 dB typical
Reflection:
> 40N
Operating temperature:
-20 to 60 C
Temperature cycling:
Salt Spray:
Vibration:
Impact:
Compression:
Torsion:
Tension:
Re-open:
Ordering Information
Description
Reference No.
MOQ
2569
100
2569
100
44
5 FTTH Connectivity
5.5 3M One Pass Mini Fibre Pathway LSZH
3M One Pass Mini Fiber Pathway is designed for use in brownfield Multi Dwelling
Units (MDUs) or Single Family Units (SFUs) serviced by FTTH networks
Also suitable for hotels, schools, hospitals, and small businesses
The One Pass Mini pathway is a single fiber flexible, surface-mount cable pathway
and drop cable solution installed in just one pass
Used to connect to hallway distribution cables from a point-of-entry location near an
apartment door to a wall outlet in the living unit positioned near an ONT
Utilizes 3M adhesive technology to adhere duct to wall
Compatible with a variety of wall surfaces
Suitable for indoor use only as LSZH material
3M One Pass Mini Fibre Pathway Duct
Feature
Benefit
45
FTTX Solutions
5 FTTH Connectivity
3M One Pass Mini Fibre Pathway
Apartment Layout and Product Placement Illustration
Bedroom
Living Room
Coax
RJ-11 Electrical
LC
900 m
250 m
250 m
blue, orange
Number of Fibers
Fiber coating
Fiber coating color
white
Fiber type
Jacket material
Jacket colour
Ivory
Flammability
Fiber pathways has been tested to the requirements of IEC 60332-3-25 and
IEC 61034-2, with modified test procedures. Note 1
LSZH
Installation Temperature
Storage Temperature
Operating Temperature
UV Resistance
Notes
1 Since this product is designed to be affixed to a wall in application, the fiber pathway was tested pursuant to
IEC 60332-3-25 and IEC 61034-2 after being adhered to a sheet rock wall or a metal strip.
2 Allow fiber pathways and accessories to acclimate for 24 hours at recommended product installation temperature prior to
install.
3 For optimum curing of the adhesive, hold recommended installation temperature conditions for 72 hours after.
900 m Ultra Bend
Insensitive Fibre
(G.657.B3)
1 Fibre Duct
0.32" (8.1 mm)
0.13"
(3.4 mm)
3M Adhesive
46
5 FTTH Connectivity
3M One Pass Mini Fibre Pathway Duct
Wall Surface Compatibility Test Results
Wall Surface Type
Pass
Yes
Semi-gloss Latex
Yes
Glossy Latex
Yes
Semi-gloss Alkyd
Yes
Flat Latex
Yes
Semi-gloss Latex
Yes
Glossy Latex
Yes
Semi-gloss Alkyd
Yes
Wallpapered Surfaces
Plain Paper
Yes
Vinyl Coated
Yes
Vinyl
Yes
Polyolefin Woven
No
No
Ordering Information
Description
Reference No.
MOQ
ILU-300-01-000-LS
1 Spool
ILU-300-02-000-LS
1 Spool
ILU-300-04-000-LS
1 Spool
47
FTTX Solutions
5 FTTH Connectivity
3M One Pass Mini Fibre Pathway Product Accessories
Ordering Information
Description
Reference No.
MOQ
ILU-SM-WO-02-SCA-IV
60
ILU-SM-WO-02-SCU-IV
60
ILU-SM-POE-WC-IV
60
ILU-PLN-12-IV
60
ILU-ANCHOR-12-IV
60
ILU-EXT-12
60
ILU-BRIDGE-125-60
60
ILU-DUCT-INSTALL-TOOL
ILU-TOOL-KIT
1 Kit
ILU-REPAIR-KIT
ILU-TEST-KIT
SM-POE-10-IV
60
SM-SMALL-POE-10-IV
60
8800-APC/AS
60/Package
8800
60/Package
2565
1/Package
2535
1/Package
2534
1/Package
N501688A
10
N501689A
10
48
ILU-DUCT-CHOMPER-TOOL
49
FTTX Solutions
Index
Reference No.
Page
Reference No.
Page
Description
N541133A
11
N721142A
14,16,20
N541181A
11
N721146A
14,16,20
N541193A
11
N501491A
16
N541199A
11
N581203A
11
N501492A
16
N581207A
11
N501493A
16
N671317A
11
N711547A
11
N541182A
18,20,23
N711597A
11
N501747A
18
N711747A
11
N501751A
18
N721162A
18,20,23
N721163A
18,20,23
N721164A
18,20,23
N721165A
18,20,23
N721166A
18,20,23
N721171A
18,20,23
N721172A
18,20,23
N721162B
18,23
N721176A
18,23
N711748A
11
N801584A
11
N801585A
11
N801595A
11
80611329493
12
80611329527
12
N501675A
12
N711660A
12
N501494A
14
N501495A
14
N501496A
14
N151064A
14,16
Double D6-18 ECAM for cable entry kit Body for housing
double cable entry kits
ECAM Double ECAM D6-9 mm Sealing kit with
diameter from 6 to 9 mm
ECAM Double D9-12 mm Sealing kit with diameter
from 9 to 12 mm
ECAM Double D12-15 mm Sealing kit with diameter
from 12 to 15 mm
ECAM Double D15 to 18 mm Sealing kit with diameter
from 15 to 18 mm
Single ECAM S3-7 Single cable entry kit with diameter
from 3 to 7 mm
Single ECAM S3.5-9.5 Single cable entry kit with
diameter from 3.5 to 9.5 mm
ECAM Double D18 - D4,5/6 for cable entry kit Body
for housing double cable entry kits
ECAM Double D4,5-6 mm Sealing kit with diameter
from 4,5 to 6 mm
N711440A
14,16
N501487A
20
N711546A
14,16
N501488A
20
N711600A
14,16
BPEO - 1 EDP
N501489A
20
N501714A
20
N721131A
14,16
N501719B
20
N711604A
14,16,18
N711438A
20
N721127A
14,16,18,20
N711599A
20
N501600A
21
N501604A
21
N501741A
23
N501425A
24
N501426A
24
N501454A
24
N501652A
24
N501818A
25
N501850A
26
N501733A
27
N711608A
27
50
Description
N541103A
14,16,18,20,23
N541104A
14,16,18,20,23
N541106A
14,16,18,20,23
N541108A
14,16,18,20,23
N541110A
14,16,18,20,23
N541113A
14,16,18,20,23
N541121A
14,16,18,20,23
N721126A
14,16,18,20,23
N711605A
14,16,20
FTB-M
28
N721130A
14,16,20
N501659A
29
N721140A
14,16,20
N711608A
29
N721141A
14,16,20
537069
30
Reference No.
Page
Description
Contact 3M
30
Contact 3M
30
N501758A
31
N681288T
31,32
N711833A
31,32
PBPO/C NG Symetric
N501760A
Reference No.
Page
2559
43
2529-AS
43
2540-AS
43
2540-G
43
32
2559-C
43
N501677A
34
2569
44
2569
44
N501680A
34
N501681A
34
N501682A
34
N501683A
34
N501689A
34
N501762A
34
N501763A
34
N501752A
35
N501753A
Description
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501,
2504-G and Fibrlok samples
Fibrlok II Angle Fiber Splice, 250 m and 900 m
(4 x 6 mm)
ILU-300-01000-LS
ILU-300-02000-LS
ILU-300-04000-LS
ILU-SM-WO02-SCA-IV
ILU-SM-WO-02SCU-IV
ILU-SM-POEWC-IV
47
47
47
48
48
48
ILU-PLN-12-IV
48
35
ILU-ANCHOR12-IV
48
N501754A
35
ILU-EXT-12
48
8686
36
VOL-0256-C
37
ILU-BRIDGE125-60
ILU-DUCTINSTALL-TOOL
ILU-DUCTCHOMPER-TOOL
48
48
Easy Cleaver
38
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave
Tool
2565
40
ILU-TOOL-KIT
48
8865
40
ILU-REPAIR-KIT
48
8800-APC/AS
40
ILU-TEST-KIT
48
SM-POE-10-IV
48
8800-APC/FS
40
SM-SMALLPOE-10-IV
48
8800-APC/AS
48
8800
48
2565
48
2535
48
8802-T/APC/
AS/1.6-3.0
8802-T/APC/
FS/1.6-3.0
8830-APC/AS
40
40
40
8830-APC/FS
40
8832-APC/AS
40
8832-APC/FS
40
8865-C
40
8700-PS/APC
41
8700-PS/UPC
41
8765-APC
42
8765-UPC
42
2529
43
48
2534
48
N501688A
48
N501689A
48
51
Important Notice
All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many
factors beyond 3Ms control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and
the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the users knowledge and control, it is essential
that the user evaluates the 3M product to determine whether it is fit for a particular purpose and suitable for the users method or application.
All questions of warranty and liability relating to 3M products are governed by the selling 3M subsidiarys Terms of Sale subject where applicable to the prevailing law.
3M and Fibrlok are trademarks of the 3M Company.
3
3M Telecommunications
Europe, Middle East & Africa
c/o 3M Deutschland GmbH
Carl-Schurz-Str. 1
D-41453 Neuss
Germany
Tel.: ++49(0)2131/14-5999
Fax: ++49(0)2131/14-5998
Internet: www.3MTelecommunications.com/eu
Printed in Germany.
3M Dr. Nr. 07-401-31800 Index d Revision 02.2015.
All rights reserved.