Beruflich Dokumente
Kultur Dokumente
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
790 862
880 960
1710 2180
65
65
65
010
010
0 6
80010698
Type No.
790862
880960
17102180
790 862 MHz
880 960 MHz 1710 1880 MHz 1850 1990 MHz 1920 2180 MHz
+45, 45
+45, 45
+45, 45
+45, 45
+45, 45
15.1 ... 15.4 ... 15.1 15.6 ... 15.9 ... 15.4 18.2 ... 18.5 ... 18.3 18.5 ... 18.7 ... 18.3 18.5 ...18.7 ... 18.3
0 ... 5 ... 10
0 ... 5 ... 10
0 ... 3 ... 6
0 ... 3 ... 6
0 ... 3 ... 6
Frequency range
Polarization
Gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
68
65
65
65
61
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Cross polar ratio
Typically:
Typically:
Typically:
Typically:
Typically:
Maindirection
0
25 dB
27 dB
25 dB
25 dB
25 dB
Sector
60
> 10 dB
> 10 dB
> 10 dB
> 10 dB
> 10 dB
Tracking, Avg.
1.0 dB
1.0 dB
0.5 dB
Squint
2.5
2.5
2.5
Vertical Pattern:
Half-power beam width
11.5
10.1
5.0
4.8
4.6
Electrical tilt
010
010
0 6
0 6
0 6
continuously adjustable
0 ... 5 ... 10 T
0 ... 5 ... 10 T
0 ... 3 ... 6 T
0 ... 3 ... 6 T
0 ... 3 ... 6 T
Sidelobe suppression for
first sidelobe above main beam:
average:
17 ... 17 ... 17 dB 17 ... 17 ... 16 dB 18 ... 17 ... 15 dB 18 ... 18 ... 16 dB 18 ... 18 ... 16 dB
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
50
< 1.5
> 30 dB
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
Total power
50
50
50
< 1.5
< 1.5
< 1.5
> 30 dB
> 30 dB
> 30 dB
> 38 dB (790...960 // 1710 2180 MHz)
> 28 dB, Typ. > 30 dB (790 862 // 880 960 MHz)
< 150 dBc
< 150 dBc
250 W*
500 W*
250 W*
500 W*
50
< 1.5
> 30 dB
250 W*
500 W*
* (at 50 C ambient temperature)
790862
45
68
11.5
dB
Horizontal Pattern
Vertical Pattern
010 electrical downtilt
7-16
Wind load
dB
Horizontal Pattern
Vertical Pattern
010 electrical downtilt
65
4.8
Horizontal Pattern
Internet: www.kathrein.de
dB
7-16 7-16
7-16
7-16
200 km/h
Height/width/depth
Category of
mounting hardware
M (Medium)
Weight
Packing size
10
10
Connector position
Adjustment
mechanism
10
dB
7-16
Input
10.1
10
880 960
+45
Mechanical specifications
65
dB
936.3894/b
Subject to alteration.
120
880 960
45
dB
10
10
790862
+45
Scope of supply
23 kg / 25 kg (clamps incl.)
2256 x 282 x 182 mm
Panel and 2 units of clamps
for 50 115 mm diameter
Vertical Pattern
0 6 electrical downtilt
80010698 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information
Accessories
Weight
approx.
1 clamp
1.0 kg
1
1
1
1
Mast: 28 60 mm diameter
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
Downtilt angle: 0 11
0.8
2.7
4.8
2.3
Description
738546
731651
85010002
85010003
737975
clamp
clamp
clamp
downtilt kit
kg
kg
kg
kg
64
Remarks
Type No.
72
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material:
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Adjustment mechanism
with integrated scale
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
49
46
108
167*
146*
Layout of interface:
60
261*
Please note:
Bottom view
* Dimensions refer to radome
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010698
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3894/b
184
Subject to alteration.
167