Beruflich Dokumente
Kultur Dokumente
http://www.tecnicontrol.pt/en/wiki/item.html?id=48-video-surveillance-cctv
The safety of people and goods is a topic of concern increasing within the society. In order to safeguard what
is most precious to them, restaurants, schools, factories and shops, among other activities and entities, are
increasingly resorting to the various solutions available, intending to better control procedures, infrastructure
and facilities.
With the flexibility afforded by its relationship with so-called new technologies, video-surveillance is one of
security solutions for which demand has increased more in recent years.
However, on one hand the existence of cameras collecting images for a particular space, 24 hours a day,
may appeal to because we feel safer, we should remember that this collection of images, and personal data,
may interfere with the rights, freedoms and guarantees of the individual.
Some types of establishments may be required, under determined terms and conditions, to have a CCTV
system of private security.
Video cameras can be an advantage with respect to control situations such as robberies or assaults and
should be used for such purposes, but above all its very important that people know these systems and all
the features they are assigned.
Using a video-surveillance system controlled from a control center allows the viewing of all movements of a
large surface where theres a large influx of people.
CCTV allows to view these images after its recording and, if any event is detected, to know their causes,
which helps improve security with a preventive nature. Furthermore, the placement of visible cameras at
strategic points contributes to deter any wrongdoing and give visitors a sense of security.
CCTV Solutions
There are basically three types of CCTV systems:
Installation costs - The cable networks of these systems have higher costs and are limited to the
maximum distance of transmission allowed by coaxial cable, because there is image degradation as a
function of the travelled distance.
Expansion difficulty - The premises of systems based on analogue cameras are limited to the number
of cameras allowed by the DVR, is sometimes necessary to replace the existing digital video recorder (DVR).
Lower resolution - The analogue image scanned rarely generates more than a definition of 0.4
Megapixel. IP cameras feature a 3 Megapixel resolution or more.
Normal Cameras They are the body cameras, the "bullet" cameras (cylindrical cameras),
mini-cameras and "dome" cameras;
Motion Cameras Usually referred to as PTZ cameras (Pan - horizontal scroll / Tilt - vertical
displacement / Zoom - focal point variation) and PT cameras (Pan and Tilt), may be Speed Dome
cameras (cameras whose movements can be performed at high speed - up to about 360/s) and
Low Speed Dome cameras (cameras whose movements are more slow - up to 120/s);
Hidden Cameras There are hidden cameras in PIR detectors, in smoke detectors and there
are many other models of hidden cameras.
The first ones are the most used and are commercially available in various formats for many different
applications.
The second ones are motorized cameras that allow direct the camera in different directions and remotely
perform zoom and are usually used when you want to cover a large area with one camera and/or there is an
operator for its operation.
The hidden cameras are used in very specific applications where you want to conceal their presence.
Resolution
The resolution of the cameras is usually measured in TVL (TV Lines) - is the smallest area of the object that
the camera can distinguish.
The most common values for the resolution are: 330, 350, 380, 420, 480, 550 and 600 TVL.
This number of lines respect to the horizontal resolution. On specifications, usually doesnt appear the
number of horizontal lines because this number depends on the chip installed in the camera.
Sensibility
Sensitivity is usually measured in lux and indicates the minimum light level required to obtain a video image
of good quality.
The lower the lux value specified for the camera, the better the image taken in low light conditions. For
example, if we have a camera with 0.4 lux and another with 1.0 lux, the first can capture a good image in
worse low light conditions.
Capture an image of good quality depends on where the cameras will be placed and what you want to view,
depending on lighting conditions:
Type of use
Recommended Cameras
~ 5.0 lux
Low-light indoor
and outdoor with
lighting by lamps
Very low-light
situations
Image Format:
Currently there are several image formats, which depend on the CCD camera, highlighting the shapes of
1/2, 1/3 and 1/4.
A lens designed for a specific image format can always be used in a device with a smaller image size, but
never on a device with an image size larger.
Power Consumption:
Power consumption is measured in amperes (A).
The usual electrical consumption of cameras is around 120mA (power consumption of the camera without
infrared illumination active).
The power consumption of a camera with the IR illumination active is around 600mA.
Its possible to feed more than just a camera with a transformer since the sum of the currents of the cameras
connected to this transformer does not exceed the current value that can be supplied by it:
The HDTVI solution can enable customer to setup a complete new 720P/1080P resolution analog
surveillance system with advantages of long distance transmission (500 meters) through coaxial cable. This
new technology enables user to upgrade their existing standard resolution analog system with HD-TVI
compliant cameras and DVRs.
Compared with other video surveillance technology, the new HDTVI(High Definition Transport Video
Interface) solution can all all analog CCTV users to enjoy the HD resolution white without investing huge
amount of money in rewiring the existing coax cable infrastructure. The top-notch HDTVI camera can deliver
latency-free 720P/1080P high definition video over up to 500 meters. Just replacing your cameras and DVRs
with HDTVI compatible products, you can seamlessly upgrade your system to a HD analog system. As one
of video surveillance manufacturer, Unifore is proud to present its latest 720P/1080P cameras which come
with different types such as standard box, bullet, vandal-proof dome, PTZ camera.
IP systems
Like traditional CCTV systems (analogue), this kind of video surveillance system allows to achieve the
objectives of security and management required.
Its distinguished by the fact that the transmission of sound and image be made via the intranet at the
premises of the organization, which in some cases may be an added value and convenience for the end
user.
IP cameras, as they are linked directly to an IP network, enable users to view live images and audio from one
location or multiple locations through the local network (LAN), Internet or intranet.
An analogue camera has a resolution of approximately 300,000 pixels, or 0,3 Megapixel; an IP camera may
have resolutions of 3 megapixels or more. With resolutions of this size there is a great ability to identify and
check the details in an image and are possible new features such as motion detection in the field of the
viewing area and zoom simultaneously in various parts of the image, etc.
With analogue cameras images are carried via coaxial cable without any encryption or authentication, which
allows anyone to view images from the camera. In contrast, IP cameras can encrypt files that are sent over
the network, thus ensuring that only authorized persons view the images.
The image quality of an IP camera that records the image digitally native is far superior to analogue image
scanned. This is not always noticed in viewing "live", however, this quality factor is clear when the recovery of
the recorded image.
The images captured by such cameras are carried on the IP network through hubs, switches and routers and
stored on a PC with the Management and Video Control (NVR) software.
Its also a full video system based on network, where no intermediate analogue component is used; an IP
video system uses the processing of IP cameras as a way to reduce bandwidth utilization.
A major advantage of this solution is the use of the infrastructure of existing structured network, as well as
the possibility of supply via PoE (Power over Ethernet), or power through the cable network, which supports
data transmission and feeding; the use of Wireless (WiFi) network devices; the possibility of integrated
Pan/Tilt/Zoom, audio, digital inputs and outputs, devices actuation and greater flexibility and integration
capability with other systems.
Fundamentals of IP Networks
IP Address
Routers
Protocol
Gateway
Its the entry point from one network to another - the gateway is responsible for proper
distribution of data into and out of a local network. Its usually a router or a computer.
Firewall
Its a filtering module located on a gateway machine that examines all incoming and
outgoing traffic to determine if it can be routed to their destination.
The router provides a comprehensive firewall through its NAT functionality - the assignment
of rules for specific IP addresses and the ability to record information of packets sent to a
particular direction so that they may be allowed on the way back.
With NAT you can connect multiple computers on a network to another network through a
single IP address, avoiding possible conflicts of identifying the IP addresses of computers on each
network.
Its possible to connect an entire network using a single IP address, since the NAT module
rewrites the source address in packets sent from computers on your local network with the address
of the router.
Usually we use a domain name because it's easier to remind oneself of a name than a
sequence of numbers, the DNS resolves the problem of names from the viewpoint of the IP - for
example, www.tecnicontrol.pt is a domain name that has an associated IP address, DNS matches
the domain name to the IP address associated with it.
Netmask
The netmask is used to cluster IP addresses; there are a group of addresses assigned to each
segment of the network. For example, the mask 255.255.255.0 groups a set of 254 IP addresses.
If we have, for example, a subnet 194.196.16.0, masked as 255.255.255.0 the addresses we
can assign to computers on the subnet will be from 194.196.16.1 to 194.196.16.254.
Port
Port numbers are 16 bits (1 to 65535) used by TCP and UDP and are used to address
applications (services) that run on a computer.
If there was only a single network application running on your computer would need no
doors because the IP address was sufficient to address the service.
The port number can be seen as the address of an application within the computer.
Some common ports are:
File Transfer Protocol (FTP) Port 21
Telnet Port 23
Simple Mail Transfer Protocol (SMTP) Port 25
WWW server (HTTP) Port 80
Domain Name Server (DNS) Port 53
Switch
Allows connection of computers in a star network which facilitates the installation and
system maintenance.
Most Switches has a number of LED that let you control the flow of global information
and/or door by door.
Compression Techniques
Its important to consider the compression method used by an IP camera, the compression reduces the size
of the video files generated during image capture. The video files contain a huge amount of data so that is
required the data compression to reduce storage requirements and bandwidth.
The most widely used compression techniques are MPEG-4 and MJPEG.
MPEG-4
With MPEG4, only a small fraction of the total image is sent as a complete image.
In image capture from a camera most of images are similar, differing only when motion occurs; in this format
is sent only the data corresponding to the differences from the previous images.
The result is reduced bandwidth usage and storage space, however, MPEG4 has a lower image quality
when compared with the M-JPEG.
IP cameras
An IP camera has an embedded web server which enables the transmission of live images through an IP
network such as a LAN, Intranet or Internet.
Advantages of IP cameras:
Lenses
The lenses can be divided into four major groups:
Fixed Lens:
Large aperture lens (wide angle) can cover a wide area but it is difficult to identify a
person;
Standard lenses allow the same visibility that the human eye;
Telephoto lens have closed angle of view, but allows better distinguish objects.
Varifocal lens:
Can be used when it is not possible to obtain a lens with a focal length needed for a
particular application or when you want more flexibility in order to select the best angle of vision.
Lens Zoom:
Have a variable focal length and are available in manual or motorized versions.
Pinhole Lenses:
F-number or F-Stop
Its the ability of a lens to "capture" light; it depends upon the relationship between the lens aperture and the
focal length.
This relationship is represented by the letter "F", which is usually referred to as "F-stop."
A low number for the F-stop means a large aperture lens that delivers a good quality image in low light.
Example: A lens with an F-stop of 1.2 captures more light than a lens with an F-stop of 4.0, which gives a
better picture in low light.
Depth of field
Depth of field is the distance before and after the object in the image that is still considered acceptably in
focus, that is, when you want to focus accurately an object that is at a certain distance, the lens also focuses
on the field a bit front and behind the object.
This image example of how the F-stop affects the depth of field
Depth of field increases or decreases according to the opening:
Opening
Large aperture (ex. f 1.2) smaller depth of field
Distance to object
The "greater" is the CCD; wider is the viewing angle for a constant focal length.
The "greater" is the focal length; lower is the viewing angle for a given CCD.
For the focal length, lenses can be classified into the following types:
Monofocal lenses are lenses with a fixed focal length and each length corresponds to an
angle of view (large, medium, narrow/closed). For example, lenses of 2.8, 4, 6, 8, 12, 16 mm...
Lens with variable focal length (varifocal lenses), are lenses with variable focal length that
is adjusted manually. For example, lenses 2:8-10, 3.5-8, 5-50 mm...
A wide angle lens has a short focal length and a telephoto lens has a large focal
length.
If we want to save, we use a fixed iris lens or manual iris. These two types are
recommended in situations where the lighting conditions have a limited range of latitude. For
example: offices, interior areas with constant illumination, etc.
To situations where the lighting suffers changes of great latitude the only solution are
lenses with auto-iris (except in situations where the mechanics of the lens is unable to react to
variations in light).
h - vertical dimensions
of the object
To make a detection, it suffices that the critical area to be observed is 5% of the total area
of the image.
To see the action, its necessary that the critical area to be observed is 10% of the total area
of the image.
To make the identification, its necessary that the critical area to be observed is 25% of the
total area of the image.
Example:
Consider having a camera with a CCD 1/3" and that with it intend to cover the entrance gate of a factory.
Consider that the critical area is located at the gate way where enter the vehicles wished to identify.
Knowing that:
The distance from the camera to the gate is D = 30.48m = 30480mm
The width of the gate is l = 3.65m = 3650mm
Knowing beforehand that the CCD 1/3" corresponds to: c = 4.8mm and v = 3.6mm
And defining that the critical area for the identification of a vehicle is 1.7m x 1.5m
We have:
Focal length f = 4.8 x 30480 / 3650 = 40mm
Height of area to cover h = v x D / f = 3.6 x 30480 / 40 = 2743.2mm = 2.7432m
Zone area to cover l x h = 3.65 x 2.7432 = 10m2
Critical area = 1.7 x 1.5 = 2.55m2
% of the vehicle on the monitor = 2.55 / 10 x 100 = 25.5%
We therefore conclude that, if you use a lens with a focal length of 40mm, you can get an identification
(registration plate) clear of vehicles that cross the entrance gate of the factory and an image area of the gate
corresponding to an area of 10m2 (3.65m wide and 2.74m height).
Megapixel Lenses
The high-resolution cameras MEGAPIXEL require adequate and superior quality lenses.
The high resolution images require higher-quality lenses.
The Megapixel cameras and the high definition (HD) movement have completely changed the rules for
selection of lenses and are challenging manufacturers to produce lenses with higher performances.
Megapixel lens is not just an enhancement to the camera, but an essential element that enhances the quality
of the captured images and, as such, when selected properly, can help take full advantage of megapixel
images; a wrong choice can cause that the camera has a quality equal to or even lower than an analogue
camera.
a lens has when transfers the information being viewed for an entire image, for each pixel of the CCD
sensor, and determines the sharpness of images.
The MTF
To understand how the lens can affect the performance of imaging systems, it is necessary to understand the
physics behind the diffraction, lens aperture, focal length and wavelength of light.
One point of reference more useful to describe the image quality (lens performance) is the modulation
function (MTF).
At its most basic definition, the MTF is how to describe the sensitivity to the contrast of a lens system.
Compared to the human eye this could be regarded as visual performance.
A perfect lens would reproduce a complete picture of an object without any degradation, but unfortunately a
perfect lens doesnt exists; image sharpness, contrast, lighting, broadcasting spectrum and distortion affect
the ability of a lens in the reproduction of an image.
A suitable lens reproduces the image of an object to the extent that a detail of that object can no longer be
reproduced.
In conclusion, the MTF is therefore a contrast ratio of an object for an image.
In the optical industry, the MTF is measured in one unit of spatial frequency named Line Pairs per mm:
Lp/mm.
For example, many manufacturers assess the lenses for a given megapixel CCD size, (usually 1.3, 3, 5 etc.)
or standard image format 1/2", 1/3 or 1/4" etc.).
The practical importance is that the Lp/mm is only relative to the size of the pixels in the camera, for
example, a lens of 120 Lp/mm can be very good for a 1.3MP camera using a 1/2" sensor and insufficient to a
2MP camera using a 2/3" sensor.
Hybrid systems
Increasingly, CCTV is taking IP technology but most of the existing systems are still analogue.
The hybrids DVR facilitate easy integration of existing systems with the latest IP technology, enabling an
implementation of CCTV/IP at lower costs.
These systems make use of both technologies, analogue and IP, reusing and integrating in the same system,
the existing analogue cameras and cabling and new IP cameras and can still make use of an existing
structured cabling network and thus significantly lower costs transition from an analogue system to an IP
system, allowing its gradual evolution.
Wiring
Power supply
Power circuits of CCTV systems should be stabilized and centralized in a restricted location, for example in a
technical area, which could prevent the interruption of operation by third parties.
For IP cameras
The cabling systems for CCTV/IP use UTP cable and its installation follows the rules of the structured
cabling networks to voice and data (see Copper and Optical Fibre Structured Cabling Networks)
Examples of connecting analogue CCTV systems with inclusion of video, audio and
data converters over UTP cabling
Passage of the video signal through UTP cable to a distance up to 600m (B&W) or
300m (colour)
Passage of the video signal and power to the converter and camera through UTP
cable without using power cord to a distance up to 50 m
Passage of 4 cameras simultaneously on a single UTP cable Power and video signal
is sent on a single UTP cable
Its suitable for application in large CCTV systems where its necessary to install many
cameras or where its difficult to pass coaxial cable due to the size of existing pipes
Some examples where it will be very useful to use such solution are:
Hotels
Schools
Hospitals
Airports
Car Parks
Shopping Malls
Etc.