Beruflich Dokumente
Kultur Dokumente
Air Filters
Compressed
CoalescingAir Filters
Compressed Air Filters
Balston Microfiber
Filter Assemblies:
Balston Coalescing Compressed
Air Filters protect your equipment
and delicate instruments from the
dirt, water, and oil usually found in
compressed air. Balston Coalescing
Filters remove these contaminants at
a very high efficiency up to 99.99% for
0.01 micron particles and droplets.
Liquid releases from the filter cartridge to an automatic drain as rapidly
as it enters the filter. This allows a
Balston Coalescing Filter to continue
removing liquids for an unlimited
time without loss of efficiency or flow
capacity. Select 1/4 to 2 line filters
come with a lifetime (20 year) warranty which guarantees the product
against defects and other failures.
Product Features:
Remove 99.99% of 0.01 micron
particles of oil, water, and dirt
from compressed air and other
gases
Continuously trap and drain
liquids
Pack1 RevF.indd 1
www.balstonfilters.com
4/19/2012 2:43:57 PM
Compressed
Air Filters
Physical Properties,
Microfibre Filter Cartridges
Temperature Range
Maximum Pressure
Differential Across Filter,
Inside-to-Outside Flow:
Materials of Construction
Retention Efficiency
Grade
DX
93%
BX
99.99%
Balston provides two grades of coalescing filter cartridges, Grade DX and Grade BX. Singly or in tandem,
these filters satisfy all requirements for removing liquid
and solid contaminants from compressed air. Balston
also has an activated carbon adsorbent CI-type cartridge
for the removal of trace oil vapors from a compressed air
line. The activated carbon cartridge is Grade 000.
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
Pack1 RevF.indd 2
1-800-343-4048
4/19/2012 2:43:57 PM
Filter Flow rates SCFM, at 2 psi drop at indicated line pressure. Refer to Principal Specification for maximum pressure
Cartridge rating of each housing
Grade
psig
2
20
40
80
100
125
150
200
250
400
650
A94A
1/4
A914, A914D, A914P
DX
BX
2002
2003
2004
1/4 DX
3/8 BX
1/2 CI
4
1.2
9
2.4
13
4
24
7
29
8
36
9
43
12
55
15
67
17
9
3
2
19
8
5
30
11
7
51
21
12
63
25
15
76
31
18
90
36
22
117
47
28
145
58
35
2104
1/2
DX
BX
CI
19
9
6
41
19
12
65
30
19
113
51
32
137
63
39
166
76
48
196
90
56
257
117
73
316
145
90
2206
3/4
DX
BX
CI
37
10
8
78
21
16
123
34
26
214
56
44
259
70
53
315
85
65
371
101
76
484
131
99
596
162
122
2208
1
DX
BX
CI
55
11
10
115
23
20
181
37
32
314
64
56
380
77
67
463
94
82
546
111
96
711
144
125
877
178
154
2312
1 1/2 DX
BX
CI
98
22
16
203
46
33
319
74
52
554
129
91
670
155
110
816
189
134
963
223
158
1254
290
206
1546
358
253
A15/80
2
DX
BX
CI
160
45
23
333
94
49
525
148
77
908
256
133
1100
310
161
1340
378
197
1580
445
231
2060
580
301
2540
715
371
3
AKH-0280
DX
BX
CI
364
90
47
760
190
98
1190
300
154
2060
510
266
2500
620
322
3045
755
394
3600
890
462
4680
1160
602
5770
1430
742
9030
2240
1160
14480
3590
1860
4
AKH-0480
DX
BX
CI
740
180
94
1540
380
196
2430
590
308
4210
1020
632
5100
1240
644
6210
1510
780
7300
1780
920
9550
2320
1200
11750
2860
1480
18400
4480
2320
29480
7180
3710
6
AKH-0880
DX
BX
CI
1500
360
188
3120
750
392
4910
1180
616
8500
2050
1064
10300
2480
1280
12550
3020
1560
14800
3560
1840
19300
4640
2390
23700
5710
2950
37120
8940
4620
59460
14330
7400
8
AKH-1480
DX
BX
CI
2620
630
329
5450
1310
686
8580
2070
1078
14860
3580
1860
18000
4340
2250
21900
5300
2740
25800
6230
3230
33700
8120
4210
41540
10010
5190
65050
15680
8130
104200
25100
13020
10
AKH-2280
DX
BX
CI
4080
1000
516
8470
2070
1077
13350
3270
1690
23110
5660
2920
28000
6850
3540
34100
8340
4310
40200
9840
5070
52400
12800
6610
64590
15780
8150
101150
24700
12760
162050
39600
20450
Compressed
Air Filters
Filter Housing
Port
Model
Size
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
Pack1 RevF.indd 3
www.balstonfilters.com
4/19/2012 2:43:57 PM
Filter Flow rates Nm3/hr, at 2 psi drop at indicated line pressure. Refer to Principal Specification for maximum pressure
Cartridge rating of each housing
Grade
barg
0.14
1.4
2.8
5.5
6.9
8.6
10.3
13.8
17.3
27.6
44.8
A94A
1/4
A914, A914D, A914P
DX
BX
2002
2003
2004
1/4 DX
3/8 BX
1/2 CI
7
2
15
4
22
7
241
12
49
14
61
15
73
20
93
25
114
29
15
5
3
32
14
8
66
19
12
87
36
20
107
42
25
129
53
31
153
61
37
199
80
48
246
99
59
2104
1/2
DX
BX
CI
32
15
10
70
32
20
110
51
32
192
87
54
233
107
66
282
129
82
333
153
95
437
199
124
537
246
153
2206
3/4
DX
BX
CI
63
17
14
133
36
27
209
59
44
364
95
75
440
119
90
535
144
110
630
172
129
822
223
168
1013
275
207
2208
1
DX
BX
CI
93
19
17
195
39
34
308
63
54
533
109
95
646
131
114
787
160
139
928
189
163
1208
245
212
1490
302
262
2312
1 1/2 DX
BX
CI
167
37
27
345
78
56
542
126
88
941
219
155
1139
263
187
1386
321
228
1636
379
268
2131
493
350
2627
608
430
A15/80
2
DX
BX
CI
272
76
39
566
160
83
892
251
131
1543
435
226
1869
527
274
2277
642
335
2684
756
392
3500
985
511
4315
1215
630
3
AKH-0280
DX
BX
CI
618
153
80
1291
323
167
2022
510
262
3500
866
452
4248
1053
547
5173
1283
669
6116
1512
785
7951
1971
1023
9803
2430
1216
15342
3806
1971
24602
6099
3160
4
AKH-0480
DX
BX
CI
1257
306
160
2616
646
333
4129
1002
523
7153
1733
1074
8665
2107
1094
10551
2565
1325
12403
3024
1563
16225
3942
2039
19963
4859
2515
31262
7612
3942
50087
12199
6303
6
AKH-0880
DX
BX
CI
2549
612
319
5301
1274
666
8342
2005
1047
14442
3483
1808
17500
4214
2175
21322
5131
2650
25145
6048
3126
32791
7883
4061
40266
9701
5012
63067
15189
7849
101023
24347
12573
8
AKH-1480
DX
BX
CI
4451
1070
559
9260
2226
1166
14577
3517
1832
25247
6082
3160
30582
7374
3823
37208
9005
4655
43834
10585
5488
57256
13796
7153
70576
17007
8818
110520
26640
13813
177036
42645
22121
10
AKH-2280
DX
BX
CI
6932
1699
877
14391
3517
1830
22682
5556
2871
39264
9616
4961
47572
11638
6014
57936
14170
7323
68300
16718
8614
89028
21747
11230
109738
26810
13487
171854
41965
21679
275323
67280
34745
Pack1 RevF.indd 4
1-800-343-4048
4/19/2012 2:43:57 PM
Class
Maximum Particle
Size (micron)
1
2
3
4
5
6
0.1
1
5
15
40
-
Water
Compressed
Air Filters
Solid
Oil
Maximum
Maximum
Maximum
Concentration Pressure Dewpoint Concentration
o
ppm (mg/m3)
ppm (mg/m3)
F
(oC)
.08
(0.1)
-94
(-70)
.008
(0.01)
.8
(1)
-40
(-40)
.08
(0.1)
4.2
(5)
-4
(-20)
.83
(1)
6.7
(8)
37
(+3)
4.2
(5)
8.3
(10)
45
(+7)
21
(25)
-
-
50
(+10)
-
-
Solid
Water
Oil
ISO Class 1
1
Any compressor with aftercooler and 2-stage coalescing. Air intended for use
as lubricated control valves, cylinders and parts blow-down.
ISO Class 2
2
Any compressor with aftercooler and coalescer. Air intended for use with
lubricated air tools, air motors, cylinders, shot blasting, non-frictional valves.
Auto
Drain
Auto
Drain
Auto
Drain
ISO Class 1
1
ISO Class 1 4 1
Any compressor with aftercooler, 2-stage coalescing and activated carbon filter. Any compressor with aftercooler, 2-stage coalescing and refrigerated dryer for
Air intended for use with general pneumatics systems.
use with instrument quality air.
ISO Class 1 1 1
Any 2-stage compressor with aftercooler, double coalescing and a regenerativetype desiccant dryer. Air intended for use in applications involving critical
instrumentation and high purity gases.
Note: In the pictorial examples shown above, the contribution of hydrocarbon vapors has not been taken into account in determining the OIL class category.
Pack1 RevF.indd 5
www.balstonfilters.com
4/19/2012 2:43:58 PM
Compressed
Air Filters
ON
moval
ficient
compressed
cost, with
t of
signed from
s such as air
al pressure
egister
tions
Tested with an Inlet challenge concentration of 33ml/m3hr and in accordance with ISO 8573.9.
Performance shown is an average for all models in range. Individual model performance available on request.
INTERNATIONAL APPROVALS
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
CRN
AS1210
Pack1 RevF.indd 6
1-800-343-4048
4/19/2012 2:43:59 PM
WS010A FX
10
36
bar g
21
16
Temperature
psi g
232
80C
176F
1.5C
35F
232
80C
176F
1.5C
35F
232
80C
176F
1.5C
35F
232
1.5C
Part
Max 80C 176F
Min
/"
40at 2.4
144 Pressure
85
16
232
80C
176F
1.5C
WS020C
FX
Number
(inches)
Operating
Operating
WS020DNPT
FX
/100
"
40 (7 barg)
2.4
144 psig85(barg)
16 Temp
232 F (C)
80C Temp
176F F 1.5C
psig
(C)
35F
/"
10
0.6
36
21
16
WS010B FX
Product
Selection
and
Technical
Data
10
0.6
36
21
16
WS010C FX
/"
3
1
3
WS015B
40
85
16
32.4
PortFX
Size /8"SCFM/Nm
/hr. 144
Max Operating
1
3
35F
35F
WS020E FX
1"
WS025D FX
WS002N
1/4
40
2.4
144
110
6.6
396
11/4"
110
25 (4) 6.6
396
233(16) 16
232
11/2"
WS003N
WS030E3/8
FX
110(170)
6.6
100
396
25
110(42) 6.6
1"
WS030F1/2
FX
WS004N
WS030G3/8
FX
WSOH3N
WS035F FX
11/4"
WS040G FX
11/2"
WS055I 1
FX
WS008N
WS055J FX
WS0H6N
3/4
WS0H4N
25 (42)
/4 "
1/2
WS006N
WS045H3/4
FX
396
85
16
233
16
15
0.25
(to calculate
flow
rates below
and
5
73
0.75
above6 100 PSIG87
use this table)
0.88
100
Line7 Pressure
176F
1.5C
35F
80C
176F
1.5C
35F
232 (80)
80C
176
176F
1.5C
35 (1.7)
35F
1015
(1)
145
1.17
0.25
233(16) 16
232
232 (80)
80C
176
176F
1.5C
35 (1.7)
35F
35F
(2)
160
1.5C
1129
1.22
0.38
176 (80)
176F
232 (16)
176
232 (80)
80C
176F
1.5C
35 (1.7)
176F
1.5C
35F
44 (3)
13
232
233(16) 16
176
232 (80)
80C
742
16
742
16
232
80C
232
80C
35 (1.7)
35 (1.7)
176F
1.5C
35F
8 (barg) 116
psig
9
131
12
1260
350
21
2"
100
350(170)
21
1260
1260
232
742(16) 16
35F
21/2"
800(170)
48
100
2880
1695(16) 16
232
232 (80)
80C
176
176F
1.5C
35 (1.7)
35F
1573
3"
800
48
250
(425)
2880
1695
232
(16) 16
232
80C
176
(80)
176F
35F
16
SIZE
232 (16)
OPTION
TYPE
750 (1274)
1.00
Correction
1.06
Factor
80C
232
176 (80)
21
250 (425)
MODEL
Correction
Factor
2
29
0.38
Flow/Pressure
3
44
0.50
Correction
Factors
4
58
0.63
35 (1.7)
1.5C
35 (1.7)
176 (80)
35 (1.7)
psi g
350
100 (170)
WS0H10N 1-1/4
bar g
232
232 (16)
Stated flows are for operation at 7 bar (g) (102 psi g) with reference to 20C, 1 bar (a), 0% relative water vapour pressure.
WS0H8N
Line Pressure
Min Operating
Temperature
0.6
cfm
MONITOR
correction factor
table.
232 (16) 1. Obtain pressure
176 (80)
35from
(1.7)
Correction factor for 8 bar g = 1.06
1458 (4)
174
189
0.63
1.37
1.41
0.75
87 (6)
232
1.46
Weight
mm
ins
kg
lbs (kg)
WS002N
WS010B
1.3
(0.6)
153
FX
/4"
76
76
1/4
/"
8
WS003N
WS010C
FX
3/8
/"
WS015B
WS004N
FX
WS020C
WSOH3N
FX
WS020D FX
WS0H4N
WS020E FX
WS006N
WS025D
FX
7.2 (18)
181.5
/"
1/2
97.53
(8)
/"
3/8
97.5
3.8
235
(10) 3.8 9.3 (24)
3
1
8
2
/ 4"
1/2
97.5
3/4
/"
3.8
129
1"
1
1"
WS030F
WS0H6N
FX
1/ "
3/4
WS030G
WS0H8N
FX
1/ "
1
WS040G FX
(8)
FX
WS0010N
3 (8)
181.5
76 3
WS008N
WS030E
WS035F FX
1
1
4
2
7.2 (18)
181.5
3.8
235
7.2 (18)
3.8
100 (7)
17116
1.00
(8)
247
1.50
1.06
18
131 (9)
261
1.54
19
145 (10)
20
275
1.58
290
1.62
1.3
0.6
1.3
0.6
1.3
201(0.6)
1.3
7.9
1.1
2.4
201(1.1)
7.99.3
(20) 2.4
7.9
1.1
2.4
6 9.3
(15)
1.3
153(0.6)
201
7.9
1.1
2.4
9.3
201
7.9
1.1
2.4
9.2
2.2
4.8
9.2
2.2
4.8
275
232.5(2.2)
(13) 5.1 10.8 (27)
9.210.8
(23) 4.8
9.2
2.2
4.8
275
232.5
5.1 (13) 5.1 10.8 (27)
9.210.8
(23) 4.8
(2.2)
9.2
2.2
4.8
3.8 (10)
3.8
129
129
5.1
9.3 (24)
7.910.8
(20) 2.4
232.5(1.1)
3.8
235
7.910.8
(20) 2.4
232.5(1.1)
129
11/4"
170
6.7
11/2"
170
6.7
1-1/4
0.6
6 7.2
(15)
5.1 (13)
432.5
17
382.5
15
5.1
11.2
432.5
17
382.5
15
5.1
11.2
15
5.1
11.2
WS0012N
WS045H
FX 1-1/2
2"
WS0H10N
WS055I
FX
1-1/4
2/ "
6.7
205
1519.9
(38) 11.2
444.5(5.1) 17.5
10
22
WS055J
WS0H12N
FX
3"
1-1/2
205
6.7
505
(17) 8.1 17 (43)
444.5(5.1) 17.5
1519.9
(38) 11.2
10
22
WS0016N
6.7 (17)
WS0020N
2-1/2
8.1 (21)
WS0024N
8.1 (21)
of product
development
and although the
19.9 (51) 17.5
(44)
22 (10.0)
17 (43)
1.12
1.17
1.22
1.27
1.32
1.37
218 (15)
1.41
232 (16)
1.46
lbs
6 7.2
(15)
153
9.3
97.5
235
7.2
0.88
Weight
Model Port
Pipe
Size
Part
Size
Dimensions
inches
(cm)
mm
ins
mm
ins
Number
(inches)
A
B
C
WS010A FX
0.50
1.32
218
1.27
203
1
/2"1piping and BSP threads : Model WS040GB
System uses
1.12
(5)
160 (11)
232
176 (80)
35factor
(1.7)to give equivalent flow
2. Divide system
flow by correction
X = (16)
code denotes B = BSPT
F = Float
WS
Non
/hr 1.06 = 984
/hrm(at 7 bar g)
rate at 7 bar g 1050m
shown
NPT M = Manual 232
174 (12)
WS0016N
2 pipe size750N =(1274)
(16)
176
(80)
35
(1.7)
Available
above
3. Select a filter model from the above table with a flow rate
WS0020N 2-1/2
1700 (2888)
232 (16) above or176
(80)
35
(1.7)
Water Separator models: 035 or 040 189 (13)
equal to /hr.
984Suitable
m
010
A
X
WS
connection
203 (14)
WS0024N
3
1700 B(2888) F
232
(16) 4. Select pipe
176
(80) & Thread
35type
(1.7)
3 digit Letter 750 (1274)
WS0H12N 1-1/2
Compressed
Air Filters
Model
www.domnickhunter.com
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page
85. Reference: 754 11/05 Rev. 000
Publication
Copyright domnick hunter limited 2005
Pack1 RevF.indd 7
www.balstonfilters.com
4/19/2012 2:43:59 PM
AFTERCOOLER
Grade DX
Filter Housing
Automatic Drain
Recommended
Recommended
Some compressor installations do not have an aftercooler (this is an undesirable situation). Air saturated
with water vapor leaves a compressor at 240F to 400F
(116C to 204C). Without an aftercooler, the air cools
close to room temperature in the distribution lines and
water condenses throughout the air distribution system.
About two-thirds of the total water content of the air
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35).
Consult your local distributor; see EU flow rates in table on page 85.
Pack1 RevF.indd 8
1-800-343-4048
4/19/2012 2:44:00 PM
Balston often receives inquiries from users of compressed air about removing oil vapor from the air, yet
the only reason for concern about oil vapor in most
applications is that it may condense to liquid oil. Just
like water vapor, oil vapor will condense to liquid when
the temperature is reduced or the air pressure is increased at constant temperature. However, the table
below show that while in theory, condensation of oil
vapor and water vapor are similar, in practice the effect
of condensation of the two vapors is quite different.
Petroleum
Base Oil
0.012
0.05
0.2
0.7
3.5
Synthetic
Oil
0.002
0.01
0.06
0.2
2.4
Water
2,743.
5,137.
10,508.
20,119.
62,371.
Field tests show that the liquid oil in air from a wellmaintained reciprocating compressor is typically in the
range of 15 to 30 ppm.With an oil-sealed rotary screw
compressor, liquid oil content in the compressed air
can vary from 10 to more than 100 ppm, depending
upon the efficiency of the bulk oil separator. Compared to these figures, the approximate 0.2 ppm of
liquid oil which could result from oil vapor condensation is for practical purposes negligible.
Grade BX
Filter Housing
Automatic Drain
Pack1 RevF.indd 9
Compressed
Air Filters
There are rare instances in which even 0.2 ppm oil vapor
in the air or gas can cause a problem; for example, in
contact with a sensitive catalyst or other highly reactive
material.
www.balstonfilters.com
4/19/2012 2:44:01 PM
Compressed
Air Filters
Properly specified filters are relatively inexpensive protection for air dryers. Both refrigerated and desiccant
dryers benefit from filter protection.
For maximum protection of the desiccant dryer, a twostage filter (Grade DX followed by Grade BX) system
with automatic drains should installed upstream from the
dryer. To protect downstream delivery points from abrasive desiccant particles, a high efficiency filter with high
solids holding capacity should be installed downstream
from the dryer. The Balston Grade DX filter cartridge is
recommended for this downstream installation location.
(Note: All Balston desiccant dryers are equipped with
prefilters and final filters, as recommended above).
Membrane Dryers
Membrane air dryers are sensitive to water and oil
droplets. Oil can permanently damage the hollow fiber
core. Balston Membrane Air Dryers are assembled with
maximum protection, two stage coalescing filters (Grade
DX followed by BX) designed to remove all contaminants
down to 0.01 microns. Most all other membrane dryers
are not assembled with adequate prefiltration protection
and should be protected with a two stage Balston Filter
System (Grade DX, Grade BX).
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
10
Pack1 RevF.indd 10
1-800-343-4048
4/19/2012 2:44:01 PM
Compressed
Air Filters
Model A914D,
A914P, A914
Models 2002 and 2003 are 1/4 and 3/8 line size
assemblies. These filters have increased liquid holding capacity and are equipped with high capacity float
drains, differential pressure indicators, sightglass, pressure relief valve, and 1/4 turn bayonet bowl closures.
The 2004 series is designed to service 1/2 compressed
air lines with low flow rates.
Model 2104
The Model 2104 is a 1/2 line size assembly with an
aluminum bowl. The filter housing has a large liquid
holding capacity and a high capacity float drain, differential pressure indicator, sightglass, pressure relief valve,
and 1/4 turn bayonet bowl closure.
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
11
Pack1 RevF.indd 11
www.balstonfilters.com
4/19/2012 2:44:02 PM
A914
A914A
2104 (1)
Port Size
Materials of Construction
Head
Bowl
Internals
Seals
Maximum Temperature
Maximum Pressure
Minimum Pressure
Shipping Weight
Dimensions
1/4 NPT
1/4 NPT
1/2 NPT
Anod. Alum.
Polycarbonate
Nylon
Buna-N
120F (49C)
150 psig (10.3 barg) (3)
5 psig (0.4 barg) (4)
0.5 lbs. (0.2 kg)
1.5W X 4.0L
(4cm X 10cm)
Anod. Alum.
Zinc
Nylon
Buna-N
220F (104C)
250 psig (17.2 barg) (3)
5 psig (0.4 barg) (4)
0.5 lbs. (0.2 kg)
1.5W x 4.0L
(4cm X 10cm)
Anod. Alum.
Anod. Alum.
Nylon
Buna-N
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1.03 barg) (4)
2.0 lbs. (0.9 kg)
3.3W X 8.5L
(8cm X 20cm)
Anod. Alum.
Anod. Alum.
Nylon
Buna-N
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1.03 barg) (4)
2.5 lbs. (1.1 kg)
3.3W X 11.3L
(8cm X 28cm)
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
Model
A914
A914A (8)
2104 (1)
Differential Pressure
Indicator
Replacement Filter Cartridges
No. Required
Box of 5
Cartridges Box of 10
CI Cartridge
Box of 1
Included (7)
Included (7)
1
5/050-05- (5)
050-05- (5)
1
5/050-05- (5)
050-05- (5)
1
5/100-12- (5)
100-12- (5)
1
5/100-18- (5)
100-18- (5)
CI-100-12-000 (5)
CI-100-25-000 (5)
Notes:
1 Lifetime (20 year) Warranty included. Contact your local representative for details.
2 Automatic drain and Differential Pressure Indicator are temperature limiting factors. For
Temperature capabilities to 220F (104C), order assemblies without automatic Drain and
Differential Pressure Indicator.
3 Maximum pressure ratings are for temperatures to 130F (54C). Please consult factory
for maximum pressure ratings at elevated temperatures.
4 Required for proper operation of piston drain, overnight drain, or float drain.
5 Indicate grade of filter cartridge by putting appropriate letter after ordering number. To order
assembly with Type CI cartridges, add-000 after assembly number. Example: 2104N-0A0-000
6 Automatic drains not supplied with assemblies containing Type CI cartridges.
7 Differential Pressure Indicator (DPI) Kit may be ordered separately, P/N 41-071. DPI is sensitive
in the range of 0-7 psi differential.
8 Order A914D-_X for overnight drain installed in the filter assembly.
Order A914P-_X for piston drain installed in the filter assembly.
Order A914A-_X for aluminum bowl and 250 psig rating.
2002
1/4 Ports
2003
3/8 Ports
2004
1/2 Ports
2104
1/2 Ports
N
NPT Thread Inlet &
Outlet Ports
G
BSPP Thread Inlet
& Outlet Ports
0A0
No DPI
Drain Plugged
1B1
DPI
Auto Drain
1B2
DPI
Manual Drain
Filter Grade
000
SA
DX
BX
Leave blank for
no filter
Cartridge
2206
3/4 Ports
2208
1 Ports
2312
1-1/2 Ports
12
Pack1 RevF.indd 12
1-800-343-4048
4/19/2012 2:44:02 PM
Compressed
Air Filters
Model 2206N
Model 2312N
Principal Specifications
Model A15/80
Model
2206 (1)
2208 (1)
Port Size
Materials of Construction
Head
Bowl
Internals
Seals
Maximum Temperature
Maximum Pressure
Minimum Pressure
Shipping Weight
Dimensions
3/4 NPT
1 NPT
1 1/2 NPT
2 NPT
Anod. Alum.
Anod. Alum.
Aluminum
Buna-N
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1 barg) (4)
8 lbs. (3.6 kg)
4W X 13L
(10cm X 33cm)
Anod. Alum.
Anod. Alum.
Aluminum
Buna-N Nuna-N
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1 barg) (4)
8 lbs. (3.6 kg)
4W X 13L
(10cm X 33cm)
Anod. Alum.
Anod. Alum.
Aluminum
Buna-N
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1 barg) (4)
15 lbs. (6.8 kg)
5.0W X 17L
(13cm X 43cm)
Anod. Alum.
Steel
St. Steel
130F (54C) (2)
250 psig (17.2 barg) (3)
15 psig (1 barg) (4)
11 lbs. (5 kg)
6.3W X 28L
(16cm X 71cm)
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
Model
2206
Differential Pressure Indicator
Included (6)
Replacement Filter Cartridges
No. Required
1
Box of 5
5/150-19- (5)
Box of 10
150-19- (5)
CI Cartridge (Box of 1)
CI150-19-000
2208
Included (6)
2312
Included (6)
A15/80
Included (6)
1
5/150-19- (5)
150-19- (5)
CI150-19-000
1
5/200-35- (5)
200-35- (5)
CI200-35-000
1
5/200-80- (5)
200-80- (5)
CI200-80-000
Notes:
1 Lifetime (20 year) Warranty included.
Contact your local representative for
details.
2 Automatic Drain and Differential
Pressure Indicator are limiting factors.
For temperature capabilities to 220F
(104C), order assemblies without
Auto Drain and Differential Pressure
Indicator.
3 Maximum pressure ratings are for
temperatures to 130F (54C). Please
consult factory for maximum pressure
ratings at elevated temperatures.
4 Required for proper operation of the
float drain.
5 Indicate grade of filter cartridge by
putting appropriate letter after ordering
number (please refer to PK1-2).
Example: 5/150-19-DX, 200-35-BX.
6 The DPI is sensitive in the range of
0-5 psi differential.
7 Pressure taps pre-drilled to accomTo order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85. modate DPI (P/N 41-070).
13
Pack1 RevF.indd 13
www.balstonfilters.com
4/19/2012 2:44:02 PM
6.25"
(16 cm)
2A-2104N-3B1
2A-2002N-3B1, 2A-2004N-3B1
2A-2003N-3B1
17"
(43 cm)
13"
(33 cm)
11"
(28 cm)
8.5"
(22 cm)
10.5"
(27 cm)
8.3"
(21 cm)
6.25"
(16 cm)
2A-2206N-3B1, 2A-2208N-3B11
2A-2312N-3B1
Principal Specifications
Model
2A-2104
2A-2206
2A-2208
2A-2312
Port Size
Materials of Construction
Head
Bowl
Internals
Seals
Maximum Temperature (1)
Maximum Pressure (2)
Minimum Pressure (3)
Shipping Weight
Dimensions
1/4 NPT
1/2 NPT
3/4 NPT
1 NPT
1.5 NPT
Aluminum
Aluminum
Aluminum
Buna-N Food Grade
120F (49C)
175 psig (12 barg)
15 psig (1 barg)
4.2 lbs. (1.9 kg)
6.25W X 8.5L
Notes:
2 Max. pressure with auto drain. Max. pressure with manual drain is 250 psi (17 barg).
Replacement Cartridge
Box of 5
Box of 10
5/100-12-DX 100-12-DX
5/100-12-BX
100-12-BX
2A-2002N-3B1
2A-2003N-3B1
2A-2004N-3B1
2A-2104N-3B1
5/100-18-DX
5/100-18-BX
100-18-DX
100-18-BX
2A-2206N-3B1
5/180-19-DX
5/180-19-BX
5/180-19-SA
150-19-DX
150-19-BX
2A-2208N-3B1
5/150-19-DX
5/150-19-BX
5/150-19-SA
150-19-DX
150-19-BX
2A-2312N-3B1
5/200-35-DX
5/200-35-BX
200-35-DX
200-35-BX
14
Pack1 RevF.indd 14
1-800-343-4048
4/19/2012 2:44:05 PM
Compressed
Air Filters
All LF/FF series housings are ASME Code Stamped for the rated maximum operating pressure. All FF Series vessels have built-in legs for floor
mounting. Selected models have swing bolt enclosures for easy access
to the internals. The filter cartridges in all models are sealed by tightening the threaded retainer cap onto the rigid tie rod, ensuring a leak tight
seal on both ends of the cartridge.
Each assembly is equipped with a carbon steel automatic float drain, differential pressure indicator, and a set of filter cartridges (except
where noted).
Benefits
Low Pressure Drop
No Wet Zone
Oleophobic/Hydrophobic
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
15
Pack1 RevF.indd 15
www.balstonfilters.com
4/19/2012 2:44:07 PM
!
NEWHigh Flow Coalescing Filter Media
HFC Grade
Efficiency: 99.5% @ 0.5 micron
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
16
Pack1 RevF.indd 16
1-800-343-4048
4/19/2012 2:44:12 PM
Model Number
2 psig
20 psig
40 psig
80 psig
100 psig
125psig
150 psig
175 psig
200 psig
220 psig
250 psig
ALN3-0128-HFC
ALF3-0128-HFC
ALF4-0125-HFC
ALF6-0136-HFC
ALF6-0336-HFC
AFN3-0128-HFC
AFF3-0128-HFC
AFF4-0125-HFC
AFF6-0136-HFC
AFF6-0328-HFC
AFF8-0428-HFC
AFF10-0728-HFC
AFF12-1128-HFC
AFF16-1528-HFC
363
363
483
725
1088
363
363
483
725
1088
1450
2538
3988
5438
753
753
1004
1507
2260
753
753
1004
1507
2260
3013
5273
8286
11299
1187
1187
1583
2375
3562
1187
1187
1583
2375
3562
4750
8312
13062
17812
2056
2056
2741
4112
6167
2056
2056
2741
4112
6167
8223
14391
22614
30837
2490
2490
3320
4980
7470
2490
2490
3320
4980
7470
9960
17430
27390
37350
3033
3033
4044
6065
9098
3033
3033
4044
6065
9098
12131
21229
33360
45491
3575
3575
4767
7151
10726
3575
3575
4767
7151
10726
14302
25028
39330
53632
4118
4118
5491
8236
12354
4118
4118
5491
8236
12354
16472
28826
45298
61770
4661
4661
6215
9322
13983
4661
4661
6215
9322
13983
18644
32627
51271
69915
5095
5095
6793
10190
15285
5095
5095
6793
10190
15285
20380
35665
56045
76425
5746
5746
N/A
N/A
N/A
5746
5746
N/A
11493
N/A
22984
40222
63206
86190
Compressed
Air Filters
Model Number
2 psig
ALN3-0128-HEC 218
ALF3-0128-HEC 218
ALF4-0125-HEC 219
ALF6-0136-HEC 437
ALF6-0328-HEC 654
AFN3-0128-HEC 218
AFF3-0128-HEC 218
AFF4-0125-HEC 291
AFF6-0136-HEC 437
AFF6-0328-HEC 654
AFF8-0428-HEC 872
AFF10-0728-HEC 1526
AFF12-1128-HEC 2398
AFF16-1528-HEC 3270
20 psig
40 psig
80 psig
100 psig
125 psig
150 psig
175 psig
200 psig
220 psig
250 psig
454
454
605
908
1362
454
454
605
908
1362
1816
3178
4994
6810
715
715
954
1431
2145
715
715
954
1431
2145
2860
5005
7865
10725
1238
1238
1651
2477
3714
1238
1238
1651
2477
3714
4952
8666
13618
18570
1500
1500
2000
3000
4500
1500
1500
2000
3000
4500
6000
10500
16500
22500
1827
1827
2436
3654
5481
1827
1827
2436
3654
5481
7308
12789
20097
27405
2154
2154
2872
4308
6462
2154
2154
2872
4308
6462
8616
15078
23694
32310
2481
2481
3308
4962
7443
2481
2481
3308
4962
7443
9924
17367
27291
37215
2808
2808
3744
5616
8424
2808
2808
3744
5616
8424
11232
19656
30888
42120
3069
3069
4092
6139
9207
3069
3069
4092
6139
9207
12276
21483
33759
46035
3462
3462
N/A
N/A
N/A
3462
3462
N/A
6923
N/A
13848
24234
38082
51930
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
17
Pack1 RevF.indd 17
www.balstonfilters.com
4/19/2012 2:44:12 PM
Compressed
Air Filters
Model Number
0.2 barg
1.4 barg
3 barg
4 barg
7barg
9 barg
10 barg
12 barg
14 barg
17 barg
20 barg
ALN3-0128-HFC
ALF3-0128-HFC
ALF4-0125-HFC
ALF6-0136-HFC
ALF6-0336-HFC
AFN3-0128-HFC
AFF3-0128-HFC
AFF4-0125-HFC
AFF6-0136-HFC
AFF6-0328-HFC
AFF8-0428-HFC
AFF10-0728-HFC
AFF12-1128-HFC
AFF16-1528-HFC
649
649
865
1299
1947
649
649
865
1233
1947
2597
4519
7141
9738
1291
1291
1721
2582
3873
1291
1291
1721
2532
3873
5164
9013
14200
19364
2147
2147
2862
4293
6440
2147
2147
2862
4265
6440
8587
15005
23613
32199
2681
2681
3575
5363
8044
2681
2681
3575
5348
8044
10726
18750
29496
40221
4286
4286
5714
8572
12857
4286
4286
5714
8597
12857
17143
29984
47144
64287
5355
5355
7141
10711
16066
5355
5355
7141
10763
16066
21422
37474
58909
80331
5890
5890
7854
11781
17671
5890
5890
7854
11846
17671
23561
41219
64792
88353
6960
6960
9280
13920
20879
6980
6980
9280
14012
20879
27839
48709
76557
104396
8029
8029
10706
16059
24088
8029
8029
10706
16178
24088
32118
56199
88323
120440
9634
9634
12846
19268
28901
9634
9634
12846
19427
28901
38535
67433
105971
144506
11238
11238
N/A
N/A
N/A
11238
11238
N/A
22676
N/A
44953
78668
123619
168572
Model Number
0.2 barg
1.4 barg
3 barg
4 barg
7barg
9 barg
10 barg
12 barg
14 barg
17 barg
20 barg
ALN3-0128-HEC
ALF3-0128-HEC
ALF4-0125-HEC
ALF6-0136-HEC
ALF6-0328-HEC
AFN3-0128-HEC
AFF3-0128-HEC
AFF4-0125-HEC
AFF6-0136-HEC
AFF6-0328-HEC
AFF8-0428-HEC
AFF10-0728-HEC
AFF12-1128-HEC
AFF16-1528-HEC
391
391
481
782
1172
391
391
481
782
1172
1563
2735
4297
3449
777
777
1001
1556
2332
777
777
1001
1556
2332
3110
5442
8552
6864
1293
1293
1695
2587
3879
1293
1293
1695
2587
3879
5172
9052
14224
11416
1615
1615
2128
3232
4846
1615
1615
2128
3232
4846
6462
11308
17770
14262
2582
2582
3429
5165
7747
2582
2582
3429
5165
7747
10329
18076
28406
22798
3227
3227
4295
6454
9681
3227
3227
4295
6454
9681
12908
22588
35497
28489
3549
3549
4729
7099
10648
3549
3549
4729
7099
10648
14197
24844
39042
31335
4194
4194
5596
8388
12581
4194
4194
5596
8388
12581
16775
29357
46133
37026
4839
4839
6463
9677
14515
4839
4839
6463
9677
14515
19354
33869
53224
42717
5805
5805
7763
11611
17416
5805
5805
7763
11611
17416
23221
40637
63860
51253
6772
6772
N/A
N/A
N/A
6772
6772
N/A
13544
N/A
27089
47405
74496
59790
510-28- HFC
510-28- HFC
850-25- HFC
850-36- HFC
510-28- HFC
510-28-HEC
510-28- HEC
850-25- HEC
850-36- HEC
510-28- HEC
3
3
4
6
6
NPT
FLANGE
FLANGE
FLANGE
FLANGE
1
1
1
1
3
510-28- HFC
510-28- HFC
850-25- HFC
850-36- HFC
510-28- HFC
510-28- HFC
510-28- HFC
510-28- HFC
510-28- HFC
510-28- HEC
510-28- HEC
850-25- HEC
850-36- HEC
510-28- HEC
510-28- HEC
510-28- HEC
510-28- HEC
510-28- HEC
3
3
4
6
6
8
10
12
16
NPT
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
1
1
1
1
3
4
7
11
15
HEC
Replacement
Port
Port
# of
Element
Size
Type
Elements
HFC
Replacement
Element
Model Number
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
18
Pack1 RevF.indd 18
1-800-343-4048
4/19/2012 2:44:13 PM
1/2 NPT
Vent
B
1/4 NPT
Gauge
Ports
1/4 NPT
Gauge
Port
1/2 NPT
Drain
1/4 NPT
Gauge
Port
1/2 NPT
Drain
A
A
1/2 NPT
Vent
B
1/4 NPT
Gauge
Ports
1/2 NPT
Vent
D
1/4 NPT
Gauge
Port
1/4 NPT
Gauge
Port
E
1/2 NPT
Drain
Refer to this
drawing for:
ALN3
ALF3
ALF4
ALF6-0136
E
1/2 NPT
Drain
1/2 NPT
Drain
1/2 NPT
Drain
Refer to this
drawing for:
ALF6-0328
Refer to this
drawing for:
AFN3
AFF3
AFF4
AFF6-0136
Dimensions
A
B
C
D
Compressed
Air Filters
1/2 NPT
Vent
Refer to this
drawing for:
AFF6-0328
AFF8
AFF10
AFF12
AFF16
Element Removal
Clearance
Sump
Capacity
Weight
pounds (kilograms)
ALN3
43.1 (109.5)
15.0 (38.1)
7.7 (19.5)
35.4 (89.9)
28 (71.1)
0.81 (3)
ALF3
43.1 (109.5)
16.0 (40.6)
7.7 (19.5)
35.4 (89.9)
28 (71.1)
0.81 (3)
190 (86)
190 (86)
ALF4
42.7 (108.5)
20.0 (50.8)
9.7 (24.6)
33.0 (83.8)
25 (63.5)
2.0 (7)
380 (173)
ALF6-0136
56.4 (143.3)
20.0 (50.8)
11.4 (29.0)
45.0 (114.3)
36 (91.4)
2.0 (7)
380 (173)
ALF6-0328
57.8 (146.8)
26.0 (66.0)
11.0 (27.9)
39.8 (101.1)
28 (71.1)
2.0 (7)
340 (155)
AFN3
58.9 (149.6)
15.0 (38.1)
9.4 (23.8)
37.5 (95.2)
12.0 (30.4)
28 (71.1)
1.1 (4)
190 (86)
AFF3
58.9 (149.6)
16.0 (40.6)
9.4 (23.8)
37.5 (95.2)
12.0 (30.4)
28 (71.1)
1.2 (4)
200 (91)
AFF4
63.3 (160.7)
20.0 (50.8)
12.3 (31.2)
35.0 (88.9)
16.0 (40.6)
25 (63.5)
4.2 (16)
370 (168)
AFF6-0136
75.3 (191.2)
20.0 (50.8)
12.3 (31.2)
47.0 (119.3)
16.0 (40.6)
36 (91.4)
3.6 (14)
410 (186)
AFF6-0328
77.3 (196.3)
26.0 (66.0)
20.8 (52.8)
40.5 (102.8)
16.0 (40.6)
28 (71.1)
5.0 (19)
340 (155)
AFF8
87.3 (221.7)
30.0 (76.2)
25.8 (65.5)
42.5 (108.0)
19.0 (48.3)
28 (71.1)
8.7 (33)
550 (250)
AFF10
96.0 (243.8)
34.0 (86.3)
28.5 (72.4)
45.5 (115.5)
22.0 (55.8)
28 (71.1)
14.8 (56)
750 (341)
AFF12
101.0 (256.5)
44.0 (111.7)
27.5 (69.8)
47.5 (120.6)
26.0 (66.0)
28 (71.1)
25.5 (97)
1300 (591)
AFF16
112.0 (28.4)
52.0 (132.0)
32.0 (81.3)
50.0 (127.0)
30.0 (76.2)
28 (71.1)
56.2 (213)
1700 (773)
Specifications
Materials of Construction
Body: Carbon Steel
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
19
Pack1 RevF.indd 19
www.balstonfilters.com
4/19/2012 2:44:14 PM
Compressed
Air Filters
AKH-0280
AKH-0480
AKH-0880
AKH-1480
AKH-2280
Port Size
Materials of Construction
Vessel
Filter Cartridge Holders
Seals
Maximum Temperature
Maximum Pressure
Minimum Pressure
Shipping Weight
Dimensions
3 FLG
4 FLG
6 FLG
8 FLG
10 FLG
Carbon Steel
303 St. Steel
Buna-N
250F (121C) (1)
665 psig (45.9 barg) (2)
10 psig (0.69 barg)
150 lbs. (68 kg)
16W X 41H
(41cm X 104cm)
7.75 (20cm)
Carbon Steel
303 St. Steel
Buna-N
250F (14C) (1)
665 psig (45.9 barg) (2)
10 psig (0.69 barg)
270 lbs. (123 kg)
21W X 40H
(53cm X 102cm)
6.25 (16cm)
Carbon Steel
303 St. Steel
Buna-N
250F (121C) (1)
665 psig (45.9 barg) (2)
10 psig (0.69 barg)
560 lbs. (254 kg)
25W X 43H
(64cm X 109cm)
8.5 (22cm)
Carbon Steel
303 St. Steel
Buna-N
250F (121C) (1)
665 psig (45.9 barg) (2)
10 psig (0.69 barg)
1120 lbs. (508 kg)
34W X 54H
(86cm X 137cm)
16.25 (41cm)
Carbon Steel
303 St. Steel
Buna-N
250F (121C) (1)
665 psig (45.9 barg) (2)
10 psig (0.69 barg)
1430 lbs. (649 kg)
36W X 57H
(91cm X 145cm)
17.25 (44cm)
15.63 (40cm)
20.63 (52cm)
24.75 (63cm)
34 (86cm)
36 (91cm)
AKH-0280-
AKH-0480-
AKH-0880-
AKH-1480-
AKH-2280-
2
5/200-80- (4)
200-80- (4)
CI-200-80-000
4
5/200-80- (4)
200-80- (4)
CI-200-80-000
8
5/200-80- (4)
200-80- (4)
CI-200-80-000
14
5/200-80- (4)
200-80- (4)
CI-200-80-000
22
5/200-80- (4)
200-80- (4)
CI-200-80-000
Notes:
1 Maximum operating temperature of carbon
steel vessel is 650F (343C). Minimum
operating (process and ambient pressure)
temperature is -20F (29C). Max. Temps.
20
Pack1 RevF.indd 20
1-800-343-4048
4/19/2012 2:44:16 PM
Balston Stainless
Steel Compressed
Air Filter Assemblies:
Compressed
Air Filters
Compressed
Air Filters
Stainless Steel
Compressed Air
Filters for Harsh Environments
Product Features:
All 304 stainless steel construction, ideal standing up to
aggressive washdown chemicals
Remove 99.99% of 0.01 micron
particles of oil, water, and dirt
from compressed air and other
gases
Petrochemical
Textiles
21
Pack1 RevF.indd 21
Refineries
www.balstonfilters.com
4/19/2012 2:44:18 PM
Physical Properties,
Microfibre Filter Cartridges
Temperature Range
Maximum Pressure
Differential Across Filter,
Inside-to-Outside Flow:
Materials of Construction
Retention Efficiency
Grade
DX
93%
BX
99.99%
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
22
Pack1 RevF.indd 22
1-800-343-4048
4/19/2012 2:44:18 PM
Model 6004
The 6004 series models are 1/2 line size filters designed for moderate flow rate systems. This series
has increased liquid holding capacity which safeguards
sensitive end use points from system upsets and morning start ups.
Model 6004
6102
1/4 Ports
6002
1/4 Ports
N
NPT Thread Inlet &
Outlet Ports
0A2
Manual
Drain
0A1
Auto Drain
6904
1/2 Ports
Short Bowl
6004
1/2 Ports
6006
3/4 Ports
6008
1 Ports
Filter Grade
000
SA
DX
BX
Leave blank for
no filter
Cartridge
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
23
Pack1 RevF.indd 23
www.balstonfilters.com
4/19/2012 2:44:18 PM
Port
Size
Filter
Cartridge
Grade
Flow rates SCFM (Nm3/hr), at 7 psi drop at indicated line pressure (over 3 stages). Refer to Principal
Specification Charts in each product data sheet for maximum pressure rating of each housing
psig (barg)
2 (0.14) 20 (1.4) 40 (3)
80 (6)
100 (7) 125 (9)
150 (10) 200 (14) 250 (17)
6102N
1/4
DX
BX
3.5 (6)
1 (2)
8 (13)
2 (3)
11 (18)
3.5 (6)
20 (33)
5.7 (10)
25 (42)
6.8 (11)
6002N
1/4
DX
9 (15)
19 (32)
39 (66)
51 (87)
63 (107) 76 (129)
145 (246)
6904N
1/2
BX
CI
SA
3 (5)
2 (3)
---
8 (14)
5 (8)
8 (14)
11 (19)
7 (12)
11 (19)
21 (36)
12 (20)
21 (36)
25 (42)
15 (25)
25 (42)
31 (53)
18 (31)
31 (53)
36 (61)
22 (37)
36 (61)
47 (80)
28 (48)
---
58 (99)
35 (59)
---
6004N
1/2
DX
BX
CI
SA
19 (32)
9 (15)
6 (10)
---
41 (70)
19 (32)
12 (20)
19 (32)
65 (110)
30 (51)
19 (32)
30 (51)
113 (192)
51 (87)
32 (54)
51 (87)
137 (233)
63 (107)
39 (66)
63 (107)
166 (181)
76 (129)
48 (82)
76 (129)
196 (333)
90 (153)
56 (95)
90 (153)
257 (437)
117 (199)
73 (124)
---
316 (537)
145 (246)
90 (153)
---
6006N
3/4
DX
BX
CI
SA
37 (63)
10 (17)
8 (14)
---
78 (133)
21 (36)
16 (27)
21 (36)
123 (209)
34 (58)
26 (44)
34 (58)
214 (364)
56 (95)
44 (75)
56 (95)
259 (440)
70 (119)
53 (90)
70 (119)
315 (535)
85 (144)
65 (110)
85 (144)
371 (630)
101 (172)
76 (129)
101 (172)
484 (822)
131 (223)
99 (168)
---
596 (1013)
162 (275)
122 (207)
---
6008N
1
DX
BX
CI
SA
55 (93)
11 (19)
10 (17)
---
115 (195)
23 (39)
20 (34)
23 (34)
181 (308)
37 (63)
32 (54)
37 (70)
314 (533)
64 (109)
56 (95)
64 (116)
380 (646)
77 (131)
67 (114)
77 (144)
463 (787)
94 (160)
82 (139)
94 (177)
546 (928)
111 (189)
96 (163)
111 (209)
711 (1208)
144 (245)
125 (212)
---
877 (1490)
178 (302)
154 (262)
---
36 (60)
10 (17)
---
---
---
---
30 (50)
8 (13)
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
24
Pack1 RevF.indd 24
1-800-343-4048
4/19/2012 2:44:19 PM
6102
6002
6904
Port Size
1/4 NPT
1/4 NPT
1/2 NPT
Materials of Construction
Head
316 Stainless Steel
304 Stainless Steel
Bowl
316 Stainless Steel
304 Stainless Steel
Internals
Acetal
Stainless Steel
Seals
Viton
Buna-N Food Grade
Maximum Temperature 140F (60C) (1)
120F (49C) (1)
Maximum Pressure
150 psig (12.1 barg) (2) 175 psig (10.3 barg) (2)
Minimum Pressure
15 psig (11 barg) (3)
15 psig (11 barg) (3)
Shipping Weight
3.5 lbs. (1.6 Kg)
3.5 lbs. (1.6 Kg)
3.5 lbs. (1.6 Kg)
Dimensions
1.5W x 4.2L
3W X 7L
3W X 7L
(3.8cm x 11.7cm)
(7cm X 18cm)
(7cm X 18cm)
Notes:
1 Max. temperature with auto drain Max. temperature with manual drain is 275F (135C).
2 Max. pressure with auto drain. Max. pressure with manual drain is 250 psi (17 barg).
Compressed
Air Filters
Principal Specifications
6004
6006
6008
1/2 NPT
3/4 NPT
1 NPT
Filter Tube
Drain (Manual)
6102N-0A0-(?X)
6102N-0A1-(?X)
6002N-0A2-(?X)
6002N-0A1-(?X)
6002N-0A2-SA
6002N-0A2-000
6904N-0A2-(?X)
6904N-0A2-(?X)
6904N-0A2-SA
6904N-0A2-000
6004N-0A2-(?X)
6004N-0A1-(?X)
6004N-0A2-SA
6004N-0A2-000
6006N-0A2-(?X)
6006N-0A1-(?X)
6006N-0A2-SA
6006N-0A2-000
6008N-0A2-(?X)
6008N-0A1-(?X)
6008N-0A2-SA
6008N-0A2-000
070-063-(?X)
070-063-(?X)
100-12-(?X)
100-12-(?X)
100-12-SA
CI-100-12-000
100-12-(?X)
100-12-(?X)
100-12-SA
CI-100-12-000
100-18-(?X)
100-18-(?X)
100-18-SA
CI-100-18-000
200-176-(?X)
200-176-(?X)
200-176-SA
200-176-000
200-185-(?X)
200-185-(?X)
200-185-SA
200-185-000
SAP05481
N/A
C01-0108
N/A
C01-0108
C01-0108
C01-0108
N/A
C01-0108
C01-0108
C01-0108
N/A
C01-0108
C01-0108
C01-0108
N/A
C01-0108
C01-0108
C01-0108
N/A
C01-0108
C01-0108
N/A
C02-2392
N/A
C01-0109
N/A
N/A
N/A
C01-0109
N/A
N/A
N/A
C01-0109
N/A
N/A
N/A
C01-0109
N/A
N/A
N/A
C01-0109
N/A
N/A
N/A
N/A
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
C01-0094
6002/6904
6004
6006
6008
1
5/100-12-(?X)
100-12-(?X)
100-12-SA
CI100-12-000
1
5/100-18-(?X)
100-18-(?X)
100-18-SA
CI100-18-000
1
5/200-176-(?X)
200-176-(?X)
200-176-SA
CI200-176-000
1
5/200-185-(?X)
200-185-(?X)
200-185-SA
CI200-185-000
1
5/070-063-(?X)
070-063-(?X)
070-063-SA
---
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
25
Pack1 RevF.indd 25
www.balstonfilters.com
4/19/2012 2:44:19 PM
Balston Filter/Silencers for air exhausts offer the combination of unusually effective sound attenuation and filtration of all visible oil mist from the exhaust air. The Filter/
Silencers are available in 1/8, 1/4, 1/2, and 3/4 port
sizes. They contain a Grade DX Microfiber Filter
Cartridge sealed into a molded nylon or steel holder.
Model 9955-05-DX
Model 9955-11-DX
Without Silencer
102
102
101
99
95
With Balston
Silencer
70
70
69
67
65
With Sintered
Polyethylene Silencer 88
88
87
87
81
Model 9955-12-DX
Model AR-009-DX
A similar test of the Model AR-009-DX on a 3/4 air line gave the
following results:
Sound Level 3 ft. from 3/4 Air Line Discharging Air
At 100 PSIG Atmosphere
Without Silencer
113 dBA
94 dBA
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
26
Pack1 RevF.indd 26
1-800-343-4048
4/19/2012 2:44:20 PM
9955-05-DX
9955-11-DX
9955-12-DX
AR-009-DX
Inlet Port
Drain Port
Materials of Construction
Filter Cartridge
Holder
Internals
Maximum Internal
Pressure at 110F (43F)
Maximum Temp. at
0 psig Internal Pressure
Shipping Weight
Dimensions
Aluminum
Aluminum
260F (127C)
0.5 lb (0.2 kg)
1.4 dia. X 2.0h
(4cm X 5cm)
260F (127C)
0.5 lb (0.2 kg)
1.4 dia. X 3.0h
(4cm X 8cm)
260F (127C)
0.5 lb (0.2 kg)
2.0 dia. X 3.7h
(5cm X 9cm)
300F (149C)
1 lb (0.5 kg)
3.95 dia. X 5.13h
(10cm X 13cm)
Compressed
Air Filters
Principal Specifications
Notes:
1 With the outlet open to atmosphere. Otherwise,
maximum internal pressure is 15 psig.
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
Model
9955-05-DX, 9955-11-DX, 9955-12-DX
Description
Standard Pack 10 Filter Silencers per box, individually wrapped
AR-009-DX
Complete Assembly with one filter element
Replacement Element for AR-009-DX
2/BE200-168-DX
Boxes of 2
BE200-168-DX
Boxes of 10
Flow
Table
1
Rates
Flow Rate from Pressured Line through Filter to Atmosphere (cu. ft. per sec.)
100 psig (6.9 barg) Line Pressure 60 psig (4.1 barg) Line Pressure
9955-05-DX
3 (4.9)
1.2 (2.5)
0.2 (0.7)
9955-11-DX
10 (16.2)
4 (8.2)
0.7 (0.5)
9955-12-DX
35 (57)
14 (29)
2.2 (1)
AR-009-DX
105 (171)
42 (86)
6.6 (4)
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
27
Pack1 RevF.indd 27
www.balstonfilters.com
4/19/2012 2:44:20 PM
Compressed
Air Filters
Compressed
Air Filters
Low Flow, Compact
Compressed Air Filters
Balston 92-800 Series
Compressed Air and Gas Filters
Safeguard critical end use points from
water, oil, rust and pipescale. The
92-800 series compressed air filters
are small and compact making them
ideal for portable pneumatics, instrumentation, and other applications requiring small pneumatic components.
The 92-800 Series are available with
anodized aluminum heads and polycarbonate bowls, anodized aluminum
bowls, or pyrex glass bowls. Capable
of up to 250 PSIG and 250F, these
filters can be applied to the most demanding applications. High efficiency
filtration media is available from 93%
at 0.01 micron to 99.9999+% at 0.01
micron.
The 92-800 series are available with
1/4 and 1/2 NPT connections.
Applications
These filters are ideal for safeguarding critical production equipment from corrosive compressor
condensate that can cause catastrophic failures and unexpected
shutdowns. Ideal applications are:
Instrumentation
Air actuators and air cylinders
Pneumatic packaging machines
Pneumatic conveyors
Air operated production
equipment
Air operated lifts
Product Features
Small compact design
Anodized aluminum with polycarbonate, Pyrex, or aluminum bowls
Continuously trap and drain liquids
Remove up to 99.9999+% of 0.01 micron particles of oil, water, and
dirt from compressed air and other gases
High fl ow rate capacity
Low pressure drop
The Parker Balston 92-800 Series offer the best protection to all your
pneumatic equipment and instrumentation. These high efficiency
filtration systems will eliminate costly maintenance and unexpected
downtime due to contaminated compressed air.
28
Pack1 RevF.indd 28
1-800-343-4048
4/19/2012 2:44:21 PM
92-810A
Filter Housing
Port Size
Model
Size
92-810G
92-810
Filter
Flow rates SCFM (Nm3/hr), at 2 psi drop at indicated line pressure. Refer to Principal Specification Charts
Cartridge in each product data sheet for maximum pressure rating of each housing
Grade
PSIG (barg)
2 (0.14)
Series 92-810/2
12 (20.4) 26 (44.2) 40 (68.0) 70 (118.9) 85 (144.4) 103 (175.0) 122 (207.3) 159 (270.1) 196 (333.0)
3 (5.1)
7 (11.9) 10 (17.0) 18 (30.6) 22 (37.4) 27 (45.9) 32 (54.4) 41 (69.7) 51 (86.6)
1/4
1/2
DX
BX
125 (8.6)
Principal Specifications
Model (1)
Port Size
Material of Construction
Head
Bowl
Internals
Seals
Maximum Temperature
Maximum Pressure
Shipping Weight
Dimensions
92-810A
1/4 NPT
92-810
1/4 NPT
92-810G
1/4 NPT
Aluminum
Aluminum
Aluminum
Buna-N Grade
250F (121C)
250 pisg (17 barg)
2 lbs. (0.9 kg)
2.75W x 5.64L (7cm W x 14cm L)
Aluminum
Polycarbonate
Aluminum
Buna-N Grade
130F (54C)
150 psig (10 barg)
2 lbs. (0.9 kg)
2.75W x 5.64L (7cm W x 14cm L)
Aluminum
Pyrex
Aluminum
Buna-N Grade
130F (54C)
100 psig (6.8 barg)
2 lbs. (0.9 kg)
2.75W x 5.64L (7cm W x 14cm L)
Ordering Information for assistance, please call 1-800-343-4048 8AM to 5PM Eastern Standard Time
Model P/N (2)
Description
92-810A
1/4 NPT Ports with Aluminum Bowl
92-812A
1/2 NPT Ports with Aluminum Bowl
92-810
1/4 NPT Ports with Polycarbonate Bowl
92-812
1/2 NPT Ports with Polycarbonate Bowl
92-810G
1/4 NPT Ports with Pyrex Glass Bowl
92-812G
1/2 NPT Ports with Pyrex Glass Bowl
Replacement Cartridge
Box of 2
2/100-12-?X
2/100-12-?X
2/100-12-?X
2/100-12-?X
2/100-12-?X
2/100-12-?X
Box of 10
100-12-?X
100-12-?X
100-12-?X
100-12-?X
100-12-?X
100-12-?X
Notes:
1 For 1/2 NPT Ports, order 92-812
2 Filter housings are not supplied with filter cartridges
29
Pack1 RevF.indd 29
www.balstonfilters.com
4/19/2012 2:44:22 PM
Filter Regulators
Filter-Regulator Combinations
Balston Filter-Regulators combine a high efficiency
coalescing filter with a high quality pressure regulator.
Air flows through the filter, then to the pressure regulator. The filter is a Balston coalescing compressed air
filter (Grade BX) and will completely remove oil, water,
and dirt from compressed air and other compressed
gases. Flow direction through the element is insideto-outside for optimum oil and water removal. An
automatic drain is installed on the 3/8, 1/2, and 3/4
models offering maintenance-free operation. Pressure
gauges are standard and are available in up to 4 different ranges (see ordering information).
AFR-940, AFR-940A
Control Characteristics
Model 12E
12E Series
Flow Characteristics
12E37E13A*
6
5
4
3
2
1
0
100
80
60
40
20
0
10
10
5
20
30
40
15
Flow - dm /s
20
50
60
25
70
30
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
30
Pack1 RevF.indd 30
1-800-343-4048
4/19/2012 2:44:25 PM
Compressed
Air Filters
Principal Specifications
Model
AFR-940
AFR-940A
12E37
12E47
Port Size
Gauge Ports
Materials of Construction
Head
Bowl
Bonnet
Internals
Maximum Temperature
Maximum Pressure
Minimum Pressure
Shipping Weight
Dimensions
1/4 NPT
1/8 NPT
1/4 NPT
1/8 NPT
1/2 NPT
1/4 NPT
3/4 NPT
1/4 NPT
Anod. Alum.
Polycarb.
Polycarb.
Brass/Buna
220F (104C)
150 psig (10.3 barg) (2)
0.5 lbs. (0.2 kg)
1.2W X 6L
(3cm X 15cm)
Anod. Alum.
Anod. Alum.
Polycarb.
Brass/Buna
220F (104C)
250 psig (17.2 barg) (2)
0.5 lbs. (0.2 kg)
1.2W X 6L
(3cm X 15cm)
Zinc
Zinc
Plastic
Zinc/Nitrile
125F (52C)
250 psig (17.2 barg) (2)
15 psig/1.03 barg (1)
2.5 lbs. (1.1 kg)
3.25W X 13L
(8 cm X 33cm)
Zinc
Zinc
Plastic
Zinc/Nitrile
125F (52C)
250 psig (17.2 barg) (2)
15 psig/1.03 barg (1)
2.5 lbs. (1.1 kg)
3.25W X 13L
(8cm X 33cm)
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
AFR-940
AFR-940A
12E37
12E47
AFR-940-30
AFR-940-60
AFR-940-130
AFR-940A-30
AFR-940A-60
AFR-940A-130
Auto. Drain
N/A (1)
N/A (1)
Included (1)
Included (1)
1
5/050-05-BX
050-05-BX
11536
1
5/050-05-BX
050-05-BX
11536
1
5/130-14-BX
130-14-BX
PS807P
1
5/130-14-BX
130-14-BX
PS807P
Model
Control Gauge Pressure Range
0-30 psig
5-60 psig
10-130 psig
Notes:
1 Minimum operating pressure for automatic
drain is 15 psig (1.03 barg).
2 Maximum pressure ratings are for tem-
How to Order
12E
1/2 Ports
3/4 Ports
Auto
Drain
BX
Grade BX
Filter
A non-rising
knob, relieving
With Gage
16 60 psig
17 30 psig
18 125 psig
21 250 psig
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
31
Pack1 RevF.indd 31
www.balstonfilters.com
4/19/2012 2:44:25 PM
Compressed
Air Filters
17L Series
.2
.1
.3
.4
.4
5
4
3
2
1
0
Flow Characteristics
17L22B* 3/8 Inch Ports
0
10
20
10
30
15
40
50
60
Flow - SCFM
20
25
30
70
80
35
90
40
.3
.2
.1
0
100
45
5
4
3
2
Flow Characteristics
17L32B* 1/2 Inch Ports
&
17L42B* 3/4 Inch Ports
1
0
10
20
10
30
15
40
20
50
60
70
80
Flow - SCFM
25
30
35
40
3
90
100
45
110
50
120
130
140
150
55
60
65
70
Flow - dm /s
Flow - dm /s
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
32
Pack1 RevF.indd 32
1-800-343-4048
4/19/2012 2:44:29 PM
Compressed
Air Filters
Principal Specifications
Model
17L22BE
17L32BE
17L42BE
Port Size
Gauge Ports
Materials of Construction
Head
Bowl
Bowl Guard
Collar
Seal
Sight Dome
Sight Gage
Maximum Temperature
Maximum Pressure
Minimum Pressure
Shipping Weight
Dimensions
3/8 NPT
1/4 NPT
1/2 NPT
1/4 NPT
3/4 NPT
1/4 NPT
Zinc
Polycarbonate
Steel
Plastic
Nitrile
Polycarbonate
Polyamide
125F (52C)
150 psig (10.3 barg)
15 psig (1.03 barg)
1.9 lbs. (0.9 kg)
3.25W X 9.27L
(85mm X 235mm)
Zinc
Polycarbonate
Steel
Plastic
Nitrile
Polycarbonate
Polyamide
125F (52C)
150 psig (10.3 barg)
15 psig (1.03 barg)
1.9 lbs. (0.9 kg)
3.25W X 9.27L
(85mm X 235mm)
Zinc
Polycarbonate
Steel
Plastic
Nitrile
Polycarbonate
Polyamide
125F (52C)
150 psig (10.3 barg)
15 psig (1.03 barg)
1.9 lbs. (0.9 kg)
3.25W X 9.27L
(85mm X 235mm)
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
Model
Service Kit
17L22BE (3/8NPT)
PS748P
17L32BE (1/2NPT)
PS748P
17L42BE (3/4NPT)
PS748P
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
33
Pack1 RevF.indd 33
www.balstonfilters.com
4/19/2012 2:44:29 PM
Basic
Series
Unit
F
I
L
T
E
R
S
3/8
1/2
FF10
10F
C
O
A
L
E
S
C
E
R
S
FF501
2-1/2
05R
3/8
1/2
3/4
Spring
1
1-1/2
FR10
X
X
125
Capacity
(Micron)
Page
5
4 oz.
(113 ml)
Standard
37
1 oz.
(28 ml)
Grade 6 Std.,
Grade 10 Opt.
39
1 oz.
(28 ml)
Grade 6
41
4 oz.
(113 ml)
Grade 6
43
Metal
Poly Metal
SG
316 Stainless Steel
P3NR
1-1/4 1-1/2
FR364
07R
FF11
S
T
A
N
D
A
R
D
3/4
Basic
Series
Unit
1/8
R
E
G
U
L
A
T
O
R
S
1/4
Elements
Bowls
Page
Standard
45
Standard
47
Standard
49
Standard
51
Standard
53
*Sight gauge
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
34
Pack1 RevF.indd 34
1-800-343-4048
4/19/2012 2:44:29 PM
Basic
Series
Unit
F
I
L
T
E
R
/
R
E
G
U
L
A
T
O
R
S
Port Size
Elements
(Micron)
Spring Range
125
1 oz.
(28 ml)
Standard
Standard
55
Bowls
Capacity
Page
Metal
SG
N/A
FB548
316 Stainless
Steel
1 oz.
(28 ml)
Standard
Standard
57
06E
4.4 oz.
(125 ml)
Standard
Standard
59
316 Stainless
Steel
4 oz.
(113 ml)
Standard
Standard
61
14E
FB11
1/8
1/4
*Sight gauge
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
35
Pack1 RevF.indd 35
www.balstonfilters.com
4/19/2012 2:44:29 PM
Accepts
3/16 I.D. Tubing
Accepts
1/8 I.D. Tubing
(Spitter Drain)
The diaphragm in this drain
pulses when there is a pressure differential such as
a valve cycling or cylinder
stroking downstream. This
action flexes the diaphragm
and allows the filter to drain
the entrapped water.
1/8" NPT
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
36
Pack1 RevF.indd 36
1-800-343-4048
4/19/2012 2:44:29 PM
Features
Stainless steel construction
handles
most corrosive environments.
Meets NACE specifications
MR-01-75/ISO 15156.
1/8" female threaded drain.
High Flow: 1/2" - 70 SCFM
(119 Nm3/hr)
A Dia.
D E
1/8
Female
Thread*
Port
Size
1/2"
Distance Required
F To Remove All
Bowls Regardless
of Drain Option
B Dia.
F10 Filter
Dimensions
Manual
Twist Drain
Automatic
Float Drain
FF10-04DGSS
FF10-04DGRSS
Manual
Twist Drain
Compressed
Air Filters
Automatic
Float Drain
FF10-04WGSS FF10-04WGRSS
SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.
Nm3/hr= Normal cubic meters per hour.
A
2.38
(60)
A1
2.50
(64)
B
1.75
(44)
C
.56
(14)
D
5.00
(127)
E
5.56
(141)
F
2.12
(54)
inches
(mm)
Ordering Information
FF10 -
Port Type
- NPT
Port Size
04 1/2 Inch
04
Bowl
D Metal Bowl
without
Sight Gauge
W Metal Bowl
with
Sight Gauge
Element
G 5 Micron
SS
Options
Blank
R
Material
Manual
SS Stainless Steel
Twist
Drain
Automatic
Float
Drain
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
37
Pack1 RevF.indd 37
www.balstonfilters.com
4/19/2012 2:49:33 PM
.2
.1
.3
Flow Characteristics
FF10-04DGSS
1/2 Inch Ports
0
0
10
20
30
10
15
40
50
60
Flow - SCFM
20
25
30
70
80
35
Flow - dm /s
n
Drain Kit
Automatic Float Drain.......................................................SA602MDSS
Manual Twist Drain
Small (Old) . ................................................................ SA600Y7-1SS
Large (New) . ....................................................................SAP05481
Filter Element Kits
Particulate (5 Micron) Element...................................................... EK55G
Pipe Nipple 1/2" 316 Stainless Steel................................... 616A28-SS
Specifications
Materials of Construction
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
38
Pack1 RevF.indd 38
1-800-343-4048
4/19/2012 2:44:31 PM
Catalog 0700P-3/USA
Features
Compressed
Air Filters
Automatic Drain
Grade 6 element,
99.97% DOP efficiency.
High Flow: Grade 6 Element
1/8" 17 SCFM (29 Nm /hr)
Accepts
1/8" Tubing
Distance Required
Grade 10 Element
1/8" 19 SCFM (32 Nm /hr)
Port
Size
Coalescing
10F10F
Coalescing
Filter
FilterDimensions
DimenA
B
C
sions
1.69
1.56
0.39
NPT
Twist Drain
1/8"
10F01E*
10F05E*
1/4"
10F11E*
10F15E*
Poly Bowl
A(43)
B
(39,6)
1.69
1.56
D
(43)D (39,6)
3.82
3.67
D(97)
D(93)
3.82
3.67
(97)E
(93)F
4.06
1.60
E(103)
F(41)
4.06
1.60
Inches (mm)
(103)
(41)
10F03E*
10F07E*
1/4"
10F13E*
10F17E*
C(10)
0.39
(10)E
4.21
E
(107)
4.21
(107)
SCFM
= Standard
cubic
feetfeet
per per
minute.
SCFM
= Standard
cubic
minute at 90 PSIG inlet and 5 PSIG
3
Nm
/hr= Normal
pressure
drop. cubic meters per hour.
Nm /hr = Normal cubic meters per hour @ 6 barg inlet and 0.34 bar
pressure drop.
3
Ordering Information
10F
Port Size
0 1/8 Inch
1 1/4 Inch
Bowl Options
Polycarbonate Bowl
1 Twist Drain
5 Automatic Pulse Drain
Metal Bowl
3 Twist Drain
7 Automatic Pulse Drain
Pack1 RevF.indd 39
Elements
E Grade 6
H Grade 10
39
34
Engineering
Level
* Will be Entered
at Factory
Port Type
Blank
1
2
NPT
BSPP
BSPT
www.balstonfilters.com
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
4/19/2012 2:44:31 PM
2.4 bar
10
.1
.5
7
6
.4
.3
4
3
.2
Flow Characteristics
10F01E*
1/8 Inch Ports
.2
.6
.3
.4
10
.6
.5
2.4 bar
10
15
20
25
Flow - SCFM
10
30
35
40
15
.1
7
6
5
4
3
2
Flow Characteristics
10F01E*
1/8 Inch Ports
45
20
10
15
Flow - dm /s
.2
.1
0
.5
7
6
.4
.3
.2
Flow Characteristics
10F01H*
1/8 Inch Ports
1
0
10
15
20
25
Flow - SCFM
10
30
35
15
40
.1
0
45
40
45
15
20
Specifications
Automatic Pulse Drain Tube Barb............................................. 1/8 Inch
Bowl Capacity . .............................................................. 1 Ounce (28 ml)
Operation
Normal Operating Pressure Drop .......................... 2 PSIG (0.14 bar)
Maximum Recommended Pressure Drop........... 10 PSIG (1.03 bar)
(Element should be replaced)
Port Threads ................................................................... 1/8, 1/4 Inch
Pressure & Temperature Ratings
Polycarbonate Bowl................................0 to 150 PSIG (0 to 10.3 bar)
32F to 125F (0C to 52C)
Metal Bowl..............................................0 to 250 PSIG (0 to 17.2 bar)
32F to 175F (0C to 80C)
Automatic Pulse Drain......................10 to 250 PSIG (0.7 to 17.2 bar)
at 125F (52C) or less
Weight ........................................................................ 0.41 lb. (0.18 kg)
7
6
5
4
3
2
Flow Characteristics
10F11H*
1/4 Inch Ports
1
0
10
15
20
25
30
35
Flow - SCFM
10
15
40
45
50
20
Flow - dm /s
n
20
Flow - dm /s
Materials of Construction
Body..................................................................................................Zinc
Bowls.......................................................... Transparent Polycarbonate
Metal (Zinc) Without Sight Gauge
Drains Twist Drain
Body & Stem............................................................ Plastic
Seals.......................................................................... Nitrile
Automatic Pulse Drain
Piston & Seals........................................................... Nitrile
Stem, Seat, Adaptor & Washers........................ Aluminum
Element Holder........................................................................... Plastic
Filter Element
Borosilicate & felt glass fibers 99.97% DOP efficiency
Largest Aerosol Particle Passed (Grade 6)......................0.01 Micron
Largest Solid Particle Passed (Grade 6)..........................0.30 Micron
Seals............................................................................................. Nitrile
40
Pack1 RevF.indd 40
35
.6
35 PSIG
10
2.4 bar
.3
Grade 10
.4
.5
10
30
.6
25
Flow - dm /s
10
20
Flow - SCFM
1-800-343-4048
4/19/2012 2:44:32 PM
Compressed
Air Filters
Features
A Dia.
1/8
Female
Thread*
NPT
Port
Size
1/4"
FF501-02DHSS
Distance
F Required
To Remove
All Bowls
Standard part numbers shown bold. For other models refer to ordering
information below.
A
1.56
(40)
C
0.31
(8)
E
4.00
(102)
F
1.58
(40)
D
3.69
(94)
inches
(mm)
Ordering Information
FF501
Port Type
- NPT
Port Size
02 1/4 Inch
Bowl
D Metal Bowl
without
Sight Gauge
02
Element
H .3 Micron
SS
Material
SS Stainless Steel
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
41
Pack1 RevF.indd 41
www.balstonfilters.com
4/19/2012 2:44:32 PM
10
9
.4
.2
.6
8
7
6
5
4
3
2
Flow Characteristics
F501-02DHSS
1/4 Inch Ports
1
0
0
0
10
15
20
Flow - SCFM
10
3
25
30
35
15
Flow - dm /s
n
Specifications
Materials of Construction
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
42
Pack1 RevF.indd 42
1-800-343-4048
4/19/2012 2:44:32 PM
Features
Compressed
Air Filters
A Dia.
D E
1/8
Female
Thread*
Port
Size
1/2"
Manual
Twist Drain
Automatic
Float Drain
F11-04DJRSS
F11G04WJSS
Distance Required
F To Remove All
Bowls Regardless
of Drain Option
Automatic
Float Drain
B Dia.
F11G04WJRSS
Standard part numbers shown bold. For other models refer to ordering information below.
inches
(mm)
Ordering Information
FF11
Port Type
- NPT
G BSPP
Port Size
04 1/2 Inch
04
Bowl
D Metal Bowl
without
Sight Gauge
W Metal Bowl
with
Sight Gauge
Element
J .01 Micron
43
Pack1 RevF.indd 43
SS
Options
Blank
R
Material
SS Stainless Steel
Manual
Twist
Drain
Automatic
Float
Drain
www.balstonfilters.com
4/19/2012 2:44:33 PM
10
9
.4
.2
.6
8
7
6
5
4
3
2
Flow Characteristics
FF11-04DJSS
1/2 Inch Ports
1
0
0
0
10
20
30
10
15
40
50
Flow - SCFM
20
25
60
70
30
80
35
Flow - dm /s
n
Drain Kit
Automatic Float Drain.......................................................SA602MDSS
Manual Twist Drain
Small (Old) . ................................................................ SA600Y7-1SS
Large (New) . ....................................................................SAP05481
Filter Element Kits
0.3 Micron....................................................................................EKF71
Pipe Nipple
1/2" 316 Stainless Steel...................................................... 616A28-SS
Specifications
Materials of Construction
99.97%
0.008
0.01
10
95%
0.85
1.0
Pressure Drop
PSID (bar)
@ Rated Flow2
Media
Media
Dry
Wet With
10-20 wt. oil
1.0
2-3
(0.07)
(0.14-0.21)
0.5
0.5 (0.03)
(0.03)
Flow:
SCFM
@3 PSID
Operating
Pressure
100 PSIG
??
??
1
2
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
44
Pack1 RevF.indd 44
1-800-343-4048
4/19/2012 2:44:33 PM
Compressed
Air Filters
A
Dia.
C1
E1
R364
R364
Series
Adjustment
Type
Port
Size
NPT
FR364
Knob
1/4"
FR364-02CSS
R364 Regulator
Dimensions
WARNING
A
1.56
(40)
C1
2.56
(65)
D
0.50
(13)
E1
3.06
(78)
inches (mm)
Ordering Information
FR364
Series
R364 Standard Knob
Port Type
- NPT
Port Size
02 1/4 Inch
02
Pressure Range
C 0-125 PSIG
(0-8.5 bar)
SS
Material
SS Stainless Steel
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
45
Pack1 RevF.indd 45
www.balstonfilters.com
4/19/2012 2:44:33 PM
Operation
A
C
D
F
B
FR364
Technical Information
CAUTION:
4
3
2
1
90
Flow Characteristics
100
80
70
60
50
40
30
20
10
0
0
.1
.3
.5
10
12
14
Flow - SCFM
.7
.9
16
1.1
18
20
1.3
Flow - dm /s
n
Specifications
Materials of Construction
46
Pack1 RevF.indd 46
1-800-343-4048
4/19/2012 2:44:34 PM
Compressed
Air Filters
SH
B
PU
TO L O
1/4" NPT
Gauge Ports
(2)
C
E
Port Size
05R Regulator
Dimensions
NPT
Without Gauge
1/4"
05R113A*
3/8"
05R213A*
05R118A*
3/8"
05R218A*
A
2.00
(51)
B
2.06
(52)
D
1.28
(32)
E
4.44
(113)
C
3.16
(80)
Inches (mm)
Ordering Information
Port Size
1 1/4 Inch
2 3/8 Inch
05R
Pressure Range
Without Gauge
13 125 PSIG/
8.62 barg
With Gauge**
18 125 PSIG/
8.62 barg
Relief
A Relieving
13
Engineering
Level
* Will be
Entered at
Factory
Port Type
---
Options
Preset / Pressure
Limited
Blank NPT
Blank No Options
Blank None
** Includes 1-1/2"
Dial Face Gauge
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
47
Pack1 RevF.indd 47
www.balstonfilters.com
4/19/2012 2:44:34 PM
05R113A*
4
3
2
1
0
105
90
75
60
45
30
15
0
10
10
20
10
30
40
Flow (SCFM)
15
20
3
50
25
60
70
30
7
6
5
4
3
2
1
0
80
35
120
8
7
05R213A*
120
105
90
75
60
45
30
15
0
10
10
20
30
10
Flow - dm /s
40
Flow (SCFM)
15
20
3
50
60
25
70
30
80
35
Flow - dm /s
CAUTION:
WARNING
Specifications
Materials of Construction
Adjusting Stem ............................................................................... Brass
Bonnet............................................................................................Plastic
Body.................................................................................................... Zinc
Collar, Knob....................................................................................Plastic
Diaphragm......................................................................................Nitrile
Poppet & Cap.................................................................................Plastic
Seals................................................................................................Nitrile
Springs Poppet & Control..............................................................Steel
48
Pack1 RevF.indd 48
1-800-343-4048
4/19/2012 2:44:35 PM
Compressed
Air Filters
B
A
C
E
R10
R10
Port
Size
NPT
1/2"
FR10-04CSS
WARNING
A
2.34
(60)
B
2.43
(62)
D
1.38
(35)
E
4.97
(126)
C
3.59
(91)
inches (mm)
NOTE: 1.75 Dia. (44mm) hole
required for panel mounting.
Ordering Information
FR10
Series
Port Type
- NPT
Port Size
04 1/2 Inch
04
SS
Pressure Range
C 0-125 PSIG
(0-8.5 bar)
49
Pack1 RevF.indd 49
Material
SS Stainless Steel
www.balstonfilters.com
4/19/2012 2:44:35 PM
Operation
A
C
D
H
F
B
E
Technical Information
Flow Characteristics
CAUTION:
90
5
4
3
2
1
100
80
70
60
50
40
30
20
10
0
0
0
10
20
10
30
15
40
50
60
Flow - SCFM
20
25
30
70
80
35
90
40
100
45
Flow - dm /s
n
Specifications
Materials of Construction
50
Pack1 RevF.indd 50
1-800-343-4048
4/19/2012 2:44:35 PM
Compressed
Air Filters
PU
H T LO
O
CK
Features
1/4" NPT
Gauge Ports
(2)
C
E
Port Size
07R Regulator
Dimensions
NPT
Without Gauge
3/8"
07R213A*
1/2"
07R313A*
3/4"
07R413A*
A
3.24
(82)
B
2.74
(70)
D
1.61
(41)
E
6.40
(163)
C
4.79
(122)
Inches (mm)
WARNING
Ordering Information
Port Size
2 3/8 Inch
3 1/2 Inch
4 3/4 Inch
07R
Pressure Range
Without Gauge
13 125 PSIG/
8.6 barg
Relief
A Relieving
13
Engineering
Level
* Will be
Entered at
Factory
Port Type
---
Options
Preset / Pressure
Limited
Blank NPT
Blank No Options
Blank None
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
51
Pack1 RevF.indd 51
www.balstonfilters.com
4/19/2012 2:44:36 PM
07R313A*
07R213A*
100
4
3
2
1
0
100
Compressed
Air Filters
80
60
4
3
40
20
10
10
30
50
70
25
Flow - dm /s
35
90
110
45
130
55
80
60
40
20
10
30
50
70
90
25
Flow - dm /s
35
110
45
130
55
CAUTION:
6
5
4
3
2
1
0
100
80
60
40
20
3/4 Inch Ports
100 PSIG (6.9 bar) Primary Pressure
0
10
10
30
15
50
70
90
35
45
110
130
55
150
65
170
75
Flow - dm /s
n
Specifications
Gauge Ports (2)............................................................................1/4 Inch
(Can be used as additional High Flow 1/4 Inch Outlet Ports)
Port Threads..................................................................3/8, 1/2, 3/4 Inch
Primary Pressure Rating
Maximum Primary Pressure..................................250 PSIG (17.2 bar)
Secondary Pressure Range
Standard Pressure..................................... 2 to 125 PSIG (0 to 8.6 bar)
Temperature Rating.....................................32F to 175F (0C to 80C)
Weight 2.5 lb. (1.1 kg)
Materials of Construction
Adjusting Stem ................................................................................ Steel
Body.................................................................................................... Zinc
Bonnet, Piston Stem, Valve Poppet & Cap ...................................Plastic
Collar, Knob....................................................................................Plastic
Diaphragm......................................................................................Nitrile
Seals................................................................................................Nitrile
Springs Poppet.....................................................................Stainless
Control............................................................................Steel
52
Pack1 RevF.indd 52
1-800-343-4048
4/19/2012 2:44:36 PM
Compressed
Air Filters
PU
CK
Features
H T LO
O
1/4" NPT
Gauge Ports
(2)
Port Size
P3NR Regulator
Dimensions
NPT
Without Gauge
P3NRA96BNN
3/4"
1"
P3NRA98BNN
P3NRA9PBNN
A
3.62
(92)
A(PB)
5.91
(150)
B
3.62
(92)
C
6.38
(162)
D
2.08
(53)
E
8.46
(215)
Inches (mm)
WARNING
Ordering Information
P3N
Design
Level
Port Type
9 NPT Female
* 3/4 & 1 inch meet ISO
1179-1 Standard.
Port Size
Relief
6 3/4" (w/o
Port Blocks)
8 1" (w/o
Port Blocks)
P 1-1/2" Port
Blocks (w/ 1"
Ported Body)
B Relieving
53
Pack1 RevF.indd 53
Adjustment
N Non-Rising
Knob
Pressure Gauge
Without Gauge
N 125 PSI (0 to 8 bar)
www.balstonfilters.com
4/19/2012 2:44:37 PM
4
3
2
1
0
90
75
60
45
30
6
5
4
3
2
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
90
75
60
45
30
15
15
600
1 Inch Ports
Primary Pressure 100 PSIG (6.9 bar)
105
P3NR
120
105
P3NR
120
Compressed
Air Filters
250
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
500
200
600
250
700
300
Flow - dm /s
Flow - dm /s
6
5
4
3
2
1
0
P3NR
105
CAUTION:
120
90
75
60
45
30
15
0
-100
100
-50
50
200
300
Flow - SCFM
100
150
400
200
500
250
600
700
300
Flow - dm /s
n
Specifications
Gauge Ports (2)............................................................................1/4 Inch
(Can be used as additional High Flow 1/4 Inch Outlet Ports)
Port Threads................................................................. 3/4, 1, 1-1/2 Inch
Primary Pressure Rating
Maximum Primary Pressure.................................250 PSIG (17.2 bar)
Secondary Pressure Range
Standard Pressure..................................... 2 to 125 PSIG (0 to 8.6 bar)
Temperature Rating.....................................32F to 175F (0C to 80C)
Materials of Construction
Adjusting Stem .................................................................................Steel
Body..........................................................................................Aluminum
Bonnet .....................................................................................Aluminum
Knob ...............................................................................................Plastic
Piston.............................................................................................Plastic
Poppet Assembly............................................................................ Brass
Seals................................................................................................Nitrile
Springs Poppet & Control...........................................................Steel
54
Pack1 RevF.indd 54
1-800-343-4048
4/19/2012 2:44:37 PM
Features
1/8" NPT
Gauge Ports
(2)
Automatic Drain
D
Distance Required
Accepts
1/8" Tubing
NPT
Port
Size
Poly
Twist Drain
1/8"
14E01B13F*
14E05B13F*
1/4"
14E11B13F*
14E15B13F*
1/8"
14E03B13F*
14E07B13F*
1/4"
14E13B13F*
14E17B13F*
Bowl
Metal Bowl
Ordering
Information
14E
Elements
Port Size
0 1/8 Inch
B 5 Micron
A
1.62
(41)
B
1.58
(40)
C
2.42
(61)
D
3.79
(96)
D
3.64
(92)
E
6.21
(158)
E
6.06
(154)
F
1.60
(41)
Inches (mm)
With Auto Drain
13
---
Preset / Pressure
Limited
Port Type
Relief
F Relieving
Blank
NPT
Blank None
1 1/4 Inch
Bowl Options
Polycarbonate Bowl
1 Twist Drain
5 Automatic Drain
Metal Bowl
3 Twist Drain
7 Automatic Drain
Engineering
Level
Pressure Range
13 125 PSIG
* Will be
Entered at
Factory
55
Pack1 RevF.indd 55
Compressed
Air Filters
Options
Blank No Options
Inlet Pressure is 100 PSIG. For
other pressures, contact factory.
www.balstonfilters.com
4/19/2012 2:44:38 PM
4
3
2
1
0
60
40
20
12
16
20
CAUTION:
Flow - dm /s
10
24
28
12
6
5
4
3
2
1
0
32
14
14E11B13F*
100
100
60
40
20
8
4
12
16
20
Flow - dm /s
10
24
28
12
32
14
WARNING
Bowl Kits
Poly Bowl Automatic Drain...............................................PS408BP
Twist Drain......................................................... PS404P
Metal Bowl Automatic Drain...............................................PS451BP
Twist Drain.......................................................PS447BP
Filter Element Kits 5 Micron................................................... PS403P
Gauges ????
Unbalanced.......................................................PS424BP
Service Kit
Relieving............................................................. PS423P
Materials of Construction
Specifications
Seals . ...........................................................................................Nitrile
Metal Bowl
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35).
Consult your local distributor; see EU flow rates in table on page 85.
56
Pack1 RevF.indd 56
1-800-343-4048
4/19/2012 2:44:38 PM
Compressed
Air Filters
A Dia.
Features
C1
E1
1/8
Female
Thread
B548
Port
Size
NPT
1/4"
FB548-02DGCSS
Distance
F Required
To Remove
All Bowls
FB548 Piggyback
Dimensions
A
1.56
(40)
C1
2.17
(55)
E1
3.06
(78)
F
1.58
(40)
D
3.63
(92)
inches (mm)
NOTE: 1.25 Dia. (32mm) hole
required for panel mounting.
WARNING
Ordering Information
FB548
Series
B548 Standard
Knob
Port Type
- NPT
02
Bowl
D Metal Bowl
without
Sight Gauge
Element
G 5 Micron
Reduced
Pressure
Range
SS
Options
Material
Blank Relieving
SS Stainless Steel
C 0-125 PSIG
(0-8.5 bar)
Port Size
02 1/4 Inch
57
Pack1 RevF.indd 57
www.balstonfilters.com
4/19/2012 2:44:38 PM
K
C
E
F
G
J
H
Technical Information
REGULATOR PRESSURE ADJUSTMENT The working range
of knob adjustment is designed to permit outlet pressures
within their full range. Pressure adjustment beyond this range
is also possible because the knob is not a limiting device. This
is a common characteristic of most industrial regulators, and
limiting devices may be obtained only by special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
5
4
3
2
1
90
CAUTION:
Flow Characteristics
100
Compressed
Air Filters
80
70
60
50
40
30
20
10
0
0
.1
.3
.5
10
12
14
Flow - SCFM
.7
.9
16
1.1
18
20
1.3
Flow - dm /s
n
Specifications
Materials of Construction
58
Pack1 RevF.indd 58
1-800-343-4048
4/19/2012 2:44:39 PM
3/8"
1/2"
06E12B13A*
06E22B13A*
06E32B13A*
06E16B13A*
06E26B13A*
06E36B13A*
06E14B13A*
06E24B13A*
06E34B13A*
06E18B13A*
06E28B13A*
06E38B13A*
Port Size
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
B
2.74
(70)
C
4.69
(119)
D
5.69
(145)
D
5.74
(146)
E
10.38
(264)
E
10.43
(265)
F
2.25
(57)
WARNING
---
Port Type
Relief
A Relieving
2 3/8 Inch
3 1/2 Inch
Preset
Blank None
Blank NPT
* 1/4 & 3/8 inch meet
ISO 1179-1 Standard.
Bowl Options
olycarbonate Bowl
P
2 Metal Bowl Guard /
Twist Drain
6 Metal Bowl Guard /
Auto Float Drain
Metal Bowl
4 Sight Gauge /
Twist Drain
8 Sight Gauge /
Auto Float Drain
Pressure
Range
13 125 PSIG
59
Pack1 RevF.indd 59
13
Elements
B 5 Micron
1 1/4 Inch
A
2.81
(71)
NOTE: 2.00 Dia. (50.8 mm) hole required for panel mounting. Max. panel thickness 1/4".
06E
Inches (mm)
With Twist Drain or Auto
Pulse Drain
Ordering
Information
H T LO
O
NPT
Twist Drain
PU
CK
Features
Port
Size
Compressed
Air Filters
Engineering
Level
* Will be
Entered at
Factory
Options
Blank No Options
Inlet Pressure is 100 PSIG.
For other pressures, contact
factory.
www.balstonfilters.com
4/19/2012 2:44:39 PM
3
2
1
0
80
60
40
20
10
20
30
40
15
20
50
60
25
06E22A13A*
100
06E12A13A*
100
6
5
4
3
2
1
0
70
30
Flow - dm /s
80
60
40
20
10
20
30
40
15
20
50
60
25
70
30
Flow - dm /s
Relief And Flow Characteristics
n
CAUTION:
06E32A13A*
5
4
3
2
1
0
100
6
80
60
40
20
10
20
30
40
50
10
15
20
25
60
70
30
80
35
90
40
Flow - dm /s
n
Specifications
Materials of Construction
60
Pack1 RevF.indd 60
1-800-343-4048
4/19/2012 2:44:40 PM
Features
E
D
1/8
Female
Thread
B Dia.
B11
Port
Size
1/2"
Compressed
Air Filters
NPT
Adjustment
Type
Manual Twist
Drain
FB11
BSPP
Automatic Float
Drain
FB11 Piggyback
Dimensions
FB11-04WGCSS FB11-04WGCRSS
FB11G04WGCSS
FB11G04WGCRSS
Distance Required
F To Remove All
Bowls Regardless
of Drain Option
A
2.34
(60)
A1
2.50
(64)
B
1.75
(44)
C
3.59
(91)
D
5.00
(127)
E
8.59
(218)
F
2.12
(54)
inches (mm)
NOTE: 1.75 Dia. (44mm) hole
required for panel mounting.
WARNING
Ordering Information
FB11
Series
FB11 Standard
Knob
Bowl
Port Type
- NPT
Port Size
04 1/2 Inch
D
W
Metal Bowl
without
Sight Gauge
Metal Bowl
with
Sight Gauge
04
Element
G 5 Micron
Reduced
Pressure
Range
SS
Options
Blank Relieving
Material
SS Stainless Steel
C 0-125 PSIG
(0-8.5 bar)
61
Pack1 RevF.indd 61
www.balstonfilters.com
4/19/2012 2:44:40 PM
L
C
G
J
H
Technical Information
CAUTION:
Spring
0-125 PSIG Range......................................................... SPR-389-1-SS
Materials of Construction
Pack1 RevF.indd 62
5
4
3
2
1
80
70
60
50
40
30
20
10
90
Flow Characteristics
FB11-04DGC-SS
100
Compressed
Air Filters
0
0
10
Specifications
20
10
30
15
40
50
60
Flow - SCFM
20
25
30
70
80
35
90
40
100
45
Flow - dm /s
n
62
1-800-343-4048
4/19/2012 2:44:41 PM
Compressed
Air Filters
20-440
20-211
20-402
20-211
20-440
20-402
Port Size
Maximum Pressure
Minimum Pressure
Maximum Temperature
Shipping Weight
Dimensions
1/2 NPT
400 psig (27.6 barg)
10 psig (0.69 barg)
500F (260C)
2 lbs. (0.9 kg)
2.5W X 7.3L
(6cm X 19cm)
1/4 NPT
300 psig (20.7 barg)
20 psig (14 barg)
122F (50C)
2 lbs. (0.9 kg)
3W X 4L
(7cm X 10cm)
1/4 NPT
200 psig (13.8 barg)
40 psig (2.8 barg)
130F (54C)
2 lbs. (0.9 kg)
3W X 4L
(7cm X 10cm)
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
63
Pack1 RevF.indd 63
www.balstonfilters.com
4/19/2012 2:44:41 PM
Finite
Finite
Finite
Finite
Finite
Receiver Tank
Filter
Air Dryer
Drip Leg
Removes the
condensate that is
collected when the
air cools inside of
the receiver tank
Removes the
condensate
that is
collected in the
filter bowl
Removes the
condensate that is
collected in the air
dryer
Point-of-use applications:
removes the condensate
from compressed air pipes
in a plant
How does the Zero Air Loss Condensate drain compare to other drains?
Condensate Removal Method
Advantages of ZLD
Manual Drain
(operators must manually open valves to
discharge condensate)
Float Drain
(uses a float connected to a drain valve that
opens when enough condensate is present and
closes when condensate has been removed)
Solenoid Operated
Drain Valves
(uses a timer which allows user to open and
close valve at specified intervals)
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
64
Pack1 RevF.indd 64
1-800-343-4048
4/19/2012 2:44:45 PM
This depicts the electric drain valve. As soon as the electronic level
controller detects a buildup of liquid, the valve opens and condensate is drained. When a minimum liquid level is reached, the valve
closes before compressed air can escape.
If an error has occurred (i.e. if the condensate cannot be discharged), the electronic control board (5) of the condensate drain
generates an alarm signal. This allows timely detection of a problem
and helps avoid excessive costs associated with condensate carryover to downstream components.
Compressed
Air Filters
$4,500
$4,000
$3,500
$3,000
$2,500
$2,000
$1,500
$1,000
$500
$0
$3,312
Easy
$4,140
installation &
servicing!
$2,484
$1,656
$828
$83
0
10
20
30
40
50
The annual cost of compressed air was calculated using data from the U.S. Department of Energy and several compressed air consultants. The average annual energy cost to
maintain a compressed air system is $0.23 per 1000 ft3. If a timed solenoid drain valve opens 3-4 times per hour, the cost of the wasted air will be $80 per valve, per year.
Zero Loss Drains dont waste any compressed air and have a payback of approximately 6 months - 1 year.
65
Pack1 RevF.indd 65
www.balstonfilters.com
4/19/2012 2:44:46 PM
Compressed
Air Filters
20-606
20-613
Dimensions (Inches/cm)
20-623
Dimensions (Inches/cm)
Dimensions (Inches/cm)
11.1 cm
10.1 cm
11 cm
/0.89 cm
/0.79 cm
/0.89 cm
/0.79 cm
12.2 cm
/0.89 cm
/0.79 cm
4.95 cm
1.2 cm
1.2 cm
1.2 cm
6.66 cm
6.66 cm
6.66 cm
12.1 cm
12.8 cm
12.3 cm
13.9 cm
14.6 cm
Model
Number
Maximum
Compressor
Capacity
Maximum
Refrigerated
Dryer Capacity*1
Maximum
Filter
Capacity*2
Pressure
Range
Temperature
Range
Connection
Size
Drain Capacity
Electrical
Requirement
20-606
Not Recommended
Not
Recommended
424 SCFM
(720 m3/h)
3 - 232 PSIG
(0.2 - 16 bar)
35 -140F
(2 60 C)
3/8 NPT
6 Gallons/23 liters
per day
120VAC
(60Hz)
20-613
141 SCFM
(240 m3/h)
283 SCFM
(480 m3/h)
1413 SCFM
(2,400 m3/h)
3 - 232 PSIG
(0.2 - 16 bar)
35 -140F
(2 60 C)
1/2 NPT
13 Gallons/49 liters
per day
120VAC
(60Hz)
20-623
247 SCFM
(420 m3/h)
494 SCFM
(840 m3/h)
2472 SCFM
(4,200 m3/h)
3 - 232 PSIG
(0.2 - 16 bar)
35 -140F
(2 60 C)
1/2 NPT
23 Gallons/87 liters
per day
120VAC
(60Hz)
*1
Based on 100 psi (6.9 bar) working pressure, air compressor inlet at 77F (25C) at 60% RH, air discharge temperature of 95F (35C) following the aftercooler, pressure
dewpoint of 37F (2.8C) after the refrigerated dryer.
*2
Condensate from aftercooler or refrigerated dryer to be drained upstream only for residual oil content or small quantities of condensate.
Note: Drains are available with BSP threads; 24V/50 - 60Hz versions are available; 24V DC on request. A 6 ft. (2 m) line cord will be included with each drain.
66
Pack1 RevF.indd 66
1-800-343-4048
4/19/2012 2:44:52 PM
Compressed
Air Filters
41-070
C02-2377
41-070
C02-2377
41-071
1/8 NPT
250 psig (17.2 barg)
130F (54C)
1.7W X 1.8H
(4cm X 5cm)
N/A
3/8-24
250 psig (17.2 barg)
130F (54C)
2.9W X 2.25H
(7cm X 6cm)
41-070
Note
1 Installation kit includes fittings and tubing
necessary for line-mounting the 41-070 DPI
C02-2377
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
67
Pack1 RevF.indd 67
www.balstonfilters.com
4/19/2012 2:44:53 PM
Model 8833-11
These Disposable Filter Units are used as continuous
coalescing filters with a third port serving as the drain,
slip-stream, or by-pass port.
Table 1
Flow Rates
Filter
Housing
Type
Model
99XX-05
Model
8833-11
Model
9922-05
Retention Efficiency
Model
DX, DQ
BX, BK, BQ
93%
99.99%
Air Flow at 2 psi (0.14 bar) drop, standard cu. ft. (normal cubic meters) per min. SCFM (Nm3/hr) at indicated line pressure
Volume of
Housing
(CU. FT.)
Filter
Tube
Grade
2 psig
20 psig
(0.14 barg) (1.4 barg)
40 psig
(2.8 barg)
60 psig
(4.1 barg)
80 psig
(5.5 barg)
100 psig
(6.9 barg)
125 psig
(8.6 barg)
9900-05
9922-05
0.0004
9933-05
4433-05
DQ
0.2 (0.23)
3.9 (2.56)
5.4 (6.32)
6.8 (7.96)
8.3 (9.71)
10.1 (11.82)
2.6 (3.04)
3.5 (4.09)
4.5 (5.26)
5.4 (6.32)
6.6 (7.72)
8822-11
8833-11
0.0007
9922-11
DX
0.4 (0.47)
6 (7.02)
8 (9.36)
10 (11.70)
12 (14.04)
14.6 (17.08)
BX
0.2 (0.23)
3 (3.51)
4 (4.68)
5 (5.85)
6 (7.02)
7.3 (8.54)
Installation Information
Compression fittings for 1/4 O.D. tubing may be obtained from the following
manufacturers: Hoke, Inc. (Gyrolock); Crawford Fitting Co.
(Swagelok); Parker-Hannifin Corp. (CPI); Legris, Inc. (push-on
fittings); Jaco Mfg. Co. (plastic fittings).
The following brass fittings seal by O-ring compression and may be completely
recovered and reused when changing filters. They may be purchased from Parker
Hannifin Corp.
Connector
Connector
Elbow
Parker Hannifin Corp. also offers a manual drain valve for removal of coalesced
liquids from the Type 8833-11-DX
Tubing with 1/4 ID may be slipped over the DFU end fittings and held with tubing
clamps. Parker Hannifin Corp. supplies plastic barbs to connect the DFU to smaller
diameter plastic tubing. The connection is suitable for pressures to 50 psig.
DFU to 1/16 ID tubing P/N 14000 (bag of 20 barbs)
DFU to 1/8 ID tubing P/N 14001 (bag of 20 barbs)
Drain Valve
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
68
Pack1 RevF.indd 68
1-800-343-4048
4/19/2012 2:44:54 PM
Compressed
Air Filters
9922-05
9900-05, 9933-05
4433-05
9922-11
9933-11
8833-11
1/4 Tubing
1/4 Tubing
1/4 Tubing
None
PVDF
2.25 (5.7 cm)
275F (135C) (1)
125 psig/8.62 barg (2)
1.4D X 4.6L
(9.1 cm X 12 cm)
None
Nylon
2.25 (5.7 cm)
230F (110C) (1)
125 psig/8.62 barg (2)
1.4D X 4.6L
(9.1cm X 12 cm)
1/4 Tubing
Nylon
2 1/4
230F (110C) (1)
125 psig/8.62 barg (2)
1.4D X 4.6L
(9.1 cm X 12 cm)
Ordering Information
For assistance, call toll-free at 1-800-343-4048 8AM to 5PM Eastern Time
Model
Filter Cartridges
Box of 10
Available in types Q and X
9922-05
9922-05- (3)
9900-05
9900-05- (3)
4433-05
4433-05- (3)
9933-05
9933-05- (3)
9922-11
9922-11- (3)
9933-11
9933-11- (3)
8833-11
8833-11- (3)
Notes:
1 At 0 psig
2 At 110F (43C)
3 To designate the grade of filter tube in the DFU, insert Grade letters after DFU designation.
For example, to obtain a grade BQ filter tube in a DFU 9922-05, order: 9922-05-BQ. Please
note the following limitations:
DFU
Supplied With
These Grades
4 BK Grade has a color indicating feature, which turns the cartridge red when saturated with
oil. Available only in types 4433-05 and 9900-05.
To order EU version that complies with PED, use EU as a prefix (Example: EU27/35). Consult your local distributor; see EU flow rates in table on page 85.
69
Pack1 RevF.indd 69
www.balstonfilters.com
4/19/2012 2:44:54 PM
Application Notes
70
Pack1 RevF.indd 70
1-800-343-4048
4/19/2012 2:44:54 PM