Sie sind auf Seite 1von 6

NETW208 Week 6 iLab Report Template

NAME:
DATE:
PROFESSOR:

NETW208 Week 6 iLab Report


There are two sections to this iLab.

Section 1: Configuring NAT and PAT iLab (20 points)


Section 2: Configuring a Cisco Router as a DHCP Server iLab (20
points)

Configuring NAT and PAT iLab (20 points)


Review the grading rubric below, and then complete the work for each step
as indicated.

Category

Points

Description

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

Section 1
Configuring NAT and PAT
20 points

Task 1: Step 4
Related
Explanation or
Response
Task 1: Step 14
Related
Explanation or
Response
Task 1: Step 16
Related
Explanation or
Response
Task 1: Step 17
Related
Explanation or
Response
Summary
Paragraph

In your own words, summarize


what you have learned about
configuring NAT and PAT.

NETW208 Week 6 iLab Report Template

Write a paragraph (minimum five college-level sentences) below that


summarizes what was accomplished in this lab; what you learned by
performing it; how it relates to this weeks TCOs and other course material;
and, just as important, how you feel it will benefit you in your academic and
professional career. (8 points)
Copy and paste the following screenshots from your Configuring NAT and PAT
lab below.
Task 1, Step 4: A few moments after you complete the commands listed at
step 4, you should receive a message indicating that router NYEDGE1 has
achieved a new adjacency with a neighbor. After you see this message,
execute the command, Do Show ip Route from the router configuration
prompt. The route table should have several routes that were learned with
EIGRP. Paste a screenshot of the output below . (1 point)

Question: Where is the remote router located to which router NYEDGE1 has
achieved neighbor status? (Hint) Read and study the explanations within the
lab for assistance. (2 points)

Task 1, Step 14: Paste a screenshot showing the output of the Show ip nat
Translations command. (1 point)

Question: Before the address translation occurred, what address was


originally assigned to the source device from which the Ping command was
sent? What was the source port?
(Hint) Read and study the explanations within the lab for assistance. (2
points)

Task 1, Step 16: Paste a screenshot showing the output of both the
extended Ping command and the debug. (1 point)

NETW208 Week 6 iLab Report Template

Question: Which piece of the debug output shows the original source
address and the address to which it is translated?
(Hint) Read and study the explanations within the lab for assistance. (2
points)

Task 1, Step 17: Paste a screenshot showing the Show ip nat Statistics
command. (1 point)

Question 1: According to the output, what is the access list number that is
used to identify inside source devices that are permitted to have their
addresses translated?
(Hint) Read and study the explanations within the lab for assistance. (1 point)

Question 2: Scan back up through the commands that were used in the lab
and locate the specific command that links the access list to the inside global
address used by the translation and write it below.
(Hint) Read and study the explanations within the lab for assistance. (1 point)

NETW208 Week 6 iLab Report Template

Configuring a Cisco Router as a DHCP Server iLab (20


points)
Review the grading rubric below and then complete the work for each step as
indicated.

Category

Points

Description

Section 2
Configuring a Cisco
Router as a DHCP Server
- 20 Points
Task 1: Step
13
Related
Explanation
or Response
Task 1: Steps
14-16
Related
Explanation
or Response
Task 1: Step
17
Related
Explanation
or Response
Task 1: Step
18
Related
Explanation
or Response
Summary
Paragraph

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

1
2

Paste the requested screenshot.


Provide the requested answer.

In your own words, summarize what


you have learned about configuring
a Cisco router as a DHCP server.

Write a paragraph (minimum five college-level sentences) below that


summarizes what was accomplished in this lab; what you learned by
performing it; how it relates to this weeks TCOs and other course material;
and, just as important, how you feel it will benefit you in your academic and
professional career. (8 points)
Copy and paste the following screenshots from your Configuring a Cisco
Router as a DHCP Server lab below.

NETW208 Week 6 iLab Report Template


Task 1, Step 13: Paste a screenshot of the output of the Show ip Interface
Brief command below. Because this is a switch, there are many interfaces. We
are only interested in the VLAN 1 interface. You only need to paste the first
few lines of output that shows its status. (1 point)

Question: What address was assigned to the VLAN interface?


(Hint) Read and study the explanations within the lab for assistance. (2
points)
Task 1 Steps 14, 15, and 16: Paste a single screenshot below after you
have issued all three show commands. (1 point)

Question: What command can be used to determine the address that a host
will use to access the DNS server?
(Hint) Read and study the explanations within the lab for assistance. (2
points)
Task 1, Step 17: Paste a screenshot after you have executed the Show ip
Dhcp Pool command from router NYEDGE1. (1 point)

Question: Compare the address that was assigned to the VLAN 1 interface of
NYCORE1 to that of the Current index value shown in your output above.
What information do you think is conveyed by the Current index value?
(Hint) Read and study the explanations within the lab for assistance. (2
points)

Task 1, Step 18: Paste a screenshot below of the output of the Show ip
Dhcp Server Statistics command that was issued on router NYEDGE1. (1 point)

Question: What action do you think will cause the value of the DHCPOFFER
field to increase?

NETW208 Week 6 iLab Report Template


(Hint) Read and study the explanations within the lab for assistance. (2
points)

Das könnte Ihnen auch gefallen