Beruflich Dokumente
Kultur Dokumente
Approved Standard
Grade
Custom HS Code
Description Application
Sampling
Marking
1.2
1.3
MS EN 10025 Part 2
MS EN 10025 Part 2
MS EN 10025 Part 2
(Delivery Condition)
Clause 11
7208.10.xxx
MS EN 10025 Part 2
(Delivery Condition)
Clause 11
7208.40.xxx
Of a thickness exceeding 10 mm
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Of a thickness of 3 mm or more but not less than 4.75 mm
Of thickness of less than 3 mm:
Containing by weight less than 0.6% of carbon
and other construction purpose
MS 1768
HR Carbon steel for
pipe and tube
SPHT1
SPHT2
SPHT3
SPHT4
MS 1768 - Clause 13
MS 1705
SPHC
SPHD
SPHE
MS 1705 - Clause 13
MS EN 10025 Part 2
Non-alloy structural
steel
S235JR
S235J0
S235J2
S275JR
S275J0
S275J2
S355JR
S355J0
S355J2
MS EN 10025 Part 2 to 6
MS EN 10025 Part 2
Clause 7.2, 7.3, 7.4, 7.5, 7.6 & 7.7
EN 10029
EN 10048
EN 10051
MS EN 10025 Part 2
Clause 7.2, 7.3 & 7.7
EN 10029
EN 10048
EN 10051
MS EN 10025 Part 2
(Delivery Condition)
Clause 11
MS 1768 - Clause 13
MS EN 10025 Part 2
MS EN 10025 Part 2
EN 10029
EN 10048
EN 10051
Clause 7.2, 7.3 & 7.7
MS EN 10025 Part 2
(Delivery Condition)
Clause 11
7208.51.xxx
7208.52.xxx
7208.53.xxx
7208.54.xxx
Hot-rolled carbon steel coil , strip and plates (Width 600mm) plated or
coated
Of a thickness exceeding 10 mm
Of a thickness of 4.75 mm or more but not exceeding 10 mm
Of a thickness of 3 mm or more but not less than 4.75 mm
Of thickness of less than 3 mm:
Containing by weight less than 0.6% of carbon
MS 1768
7208.51.xxx
7208.52.xxx
MS EN 10025
7208.53.xxx
7208.54.xxx
MS 1705
2.2
MS 2543*
MS 2384 - Clause 11
MS 2385 - Clause 11
MS 1705 - Clause 13
MS 2500
MS 2384*
MS 2385*
MS 2500
Roof/Cladding/Steel
truss/Purlin/Batten/floor
decking/ductings/steel frames/ceiling
panel or ceiling strips/gutter and
roofing accessories and any other
construction application
7210.41.xxx
7210.49.xxx
2.4
Roof/Cladding/Steel
truss/Purlin/Batten/ductings/steel
frames/ceiling panels or ceiling
strips/gutter and roofing accessories
2.5
MS 1196*
JIS G3317*
MS 2500
MS 2383*
(MS 2384 MS 2385)
7210.61.xxx
JIS G3318*
(JIS G3317)
2.6
2.7
MS 2543*
MS 2500
MS 2384*
MS 2385*
Roof/Cladding/Steel
truss/Purlin/Batten/floor
decking/ductings/steel frames/ceiling
panel or ceiling strips and any other
construction application
2.8
MS 2500
2.9
Containing by weight less than 0.6% of carbon: (Coil Width < 600mm)
Hoop and strip
Of a thickness not exceeding 1.5 mm
Otherwise Plated or Coated sheets and coils (Coil Width < 600mm)
MS 1196*
Roof/Cladding/Steel
truss/Purlin/Batten/floor
decking/ductings/steel frames/ceiling
panel or ceiling strips and any other
construction application
MS 2500
MS 2384 - Clause 11
MS 2385 - Clause 11
Clause 11
API 5L - Clause 11
Clause 11
3.2
7212.20.xxx
Additional HS Code:
7326.90.500
7326.90.900
7212.30.xxx
Additional HS Code:
7326.90.500
7326.90.900
MS1196 - Clause 15
3.1
7210.70.xxx
7212.40.xxx
Additional HS Code:
7326.90.500
7326.90.900
MS ISO 3183
API 5L
API 5CT - Clause 10.4.3 Table C37, C38 & C39 API 5CT - Clause 10.3, 10.4, 10.5, 10.6, 10.7,
10.12, 10.13 & 10.13.5, 10.15
API 5CT
MS ISO 3183
MS 1968
API 5L
API 5CT
MS 1968 - (a) Seamless : 9.2.3, 9.2.4, 10.1, MS 1968 - (a) Seamless : 9.2.3, 10.1 &
10.3 & 10.7 (b) Butt Welded : 9.2.3, 9.2.4, 10.7 (b) Butt Welded : 9.2.3, 9.2.4,
9.2.5 , 10.1 , 10.3, 10.4, 10.7 & 7.7.4.2 (c.)
9.2.5 , 10.1, 10.7 & 7.7.4.2 (c.)
Electric Welded : 9.2.3, 9.2.4, 9.2.5, 10.1, Electric Welded : 9.2.3, 9.2.4, 9.2.5,
10.3, 10.4, 10.7 & 7.7.4.3 (d) Submerged
10.1, 10.7 & 7.7.4.3 (d) Submerged
arc weld : 9.2.3, 9.2.6, 10.1, 10.3, 10.4, 10.7 arc weld : 9.2.3, 9.2.6, 10.1, 10.7 &
& 7.7.4.3
7.7.4.3
API 5CT - Clause 10.4.3 Table C37, C38 & C39 API 5CT - Clause 10.3, 10.4, 10.5, 10.6, 10.7,
10.12, 10.13 & 10.13.5, 10.15
Additional HS Code:
7326.90.500
7326.90.900
7212.50.xxx
7304.10.xxx
MS 1968 - Clause 12
API 5L - Clause 11
7305.11.xxx
7305.12.xxx
7305.19.xxx
3.3
Other, welded:
Other, welded:
MS ISO 3183
Clause 11
MS 1968 - (a) Seamless : 9.2.3, 9.2.4, 10.1, MS 1968 - (a) Seamless : 9.2.3, 10.1 &
10.3 & 10.7 (b) Butt Welded : 9.2.3, 9.2.4, 10.7 (b) Butt Welded : 9.2.3, 9.2.4,
9.2.5 , 10.1 , 10.3, 10.4, 10.7 & 7.7.4.2 (c.)
9.2.5 , 10.1 , 10.7 & 7.7.4.2 (c.)
Electric Welded : 9.2.3, 9.2.4, 9.2.5, 10.1, Electric Welded : 9.2.3, 9.2.4, 9.2.5,
10.3, 10.4, 10.7 & 7.7.4.3 (d) Submerged
10.1, 10.7 & 7.7.4.3 (d) Submerged
arc weld : 9.2.3, 9.2.6, 10.1, 10.3, 10.4, 10.7 arc weld : 9.2.3, 9.2.6, 10.1, 10.7 &
& 7.7.4.3
7.7.4.3
MS 1968 - Clause 12
SPAN TS 21827 Part 1 - (a) Seamless : 7.3.1, SPAN TS 21827 Part 1 - (a) Seamless :
7.3.2, 7.2.1, 7.5.2, 7.6 (b) Butt Welded :
7.3.1, 7.2.1, 7.6 (b) Butt Welded :
7.3.1, 7.3.2, 7.3.3, 7.2.1, 7.5.2, 10.4, 7.6, 7.3.1, 7.3.2, 7.3.3, 7.2.1, 7.6, 7.7.4.2
7.7.4.2 (c.) Electric Welded : 7.3.1, 7.3.2,
(c.) Electric Welded : 7.3.1, 7.3.2,
7.3.3, 7.2.1, 7.5.2, 10.4, 7.6, 7.7.4.2 (d)
7.3.3, 7.2.1, 7.6, 7.7.4.2 (d)
Submerged arc weld : 7.3.1, 10.2.4, 7.5.2, Submerged arc weld : 7.3.1, 10.2.4,
10.4, 7.2.1, 7.6, 7.7.4.2
7.2.1, 7.6, 7.7.4.2
SPAN TS 21827 Part 2- Clause 9.1.1 Table13 SPAN TS 21827 Part 2 - (a) Seamless : 7.3.1, SPAN TS 21827 Part 2 - (a) Seamless :
7.3.2, 7.2.1, 7.5.2, 7.6 (b) Butt Welded :
7.3.1, 7.2.1, 7.6 (b) Butt Welded :
7.3.1, 7.3.2, 7.3.3, 7.2.1, 7.5.2, 10.4, 7.6, 7.3.1, 7.3.2, 7.3.3, 7.2.1, 7.6, 7.7.4.2
(c.) Electric Welded : 7.3.1, 7.3.2,
7.7.4.2 (c.) Electric Welded : 7.3.1, 7.3.2,
7.3.3, 7.2.1, 7.6, 7.7.4.2 (d)
7.3.3, 7.2.1, 7.5.2, 10.4, 7.6, 7.7.4.2 (d)
Submerged arc weld : 7.3.1, 10.2.4,
Submerged arc weld : 7.3.1, 10.2.4,
7.2.1, 7.6, 7.7.4.2
7.2.1,7.5.2, 10.4, 7.6, 7.7.4.2
API 5L
7305.39.xxx
7305.90.xxx
BS EN 10219 - Clause 10
MS 863
MS1862
MS 1968
API 5L - Clause 11
MS 275
7305.20.xxx
MS 1462-1
API 5CT - Clause 10.4.3 Table C37, C38 & C39 API 5CT - Clause 10.3, 10.4, 10.5, 10.6, 10.7,
10.12, 10.13 & 10.13.5, 10.15
BS EN 10219
API 5CT
3.4
MS 1968
Longitudinally welded
MS 863 - (a) Seamless : 8.2, 8.3, 8.4, 9.6, 7.4 MS 863 - (a) Seamless : 8.2, 8.4, 7.4
(b) Longitudinally Welded : 8.2, 8.3, 8.4,
(b) Longitudinally Welded : 8.2, 8.4,
9.4, 9.5, 9.6, 7.4
9.4, 9.5, 7.4
MS 863 - Clause 10
7306.30.xxx
MS1862 - Clause 11
7306.50.xxx
MS 1968 - (a) Seamless : 9.2.3, 9.2.4, 10.1, MS 1968 - (a) Seamless : 9.2.3, 10.1 &
10.3 & 10.7 (b) Butt Welded : 9.2.3, 9.2.4, 10.7 (b) Butt Welded : 9.2.3, 9.2.4,
9.2.5 , 10.1 , 10.3, 10.4, 10.7 & 7.7.4.2 (c.)
9.2.5 , 10.1 , 10.7 & 7.7.4.2 (c.)
Electric Welded : 9.2.3, 9.2.4, 9.2.5, 10.1, Electric Welded : 9.2.3, 9.2.4, 9.2.5,
10.1, 10.7 & 7.7.4.3 (d) Submerged
10.3, 10.4, 10.7 & 7.7.4.3 (d) Submerged
arc weld : 9.2.3, 9.2.6, 10.1, 10.3, 10.4, 10.7 arc weld : 9.2.3, 9.2.6, 10.1, 10.7 &
7.7.4.3
& 7.7.4.3
MS 1968 - Clause 12
7306.61.xxx
MS 1462-1 - Clause 10
7306.69.xxx
MS 1462-2-1 - Clause 12
Not mentioned by std. Refer proposal during MS 1462-1 Clause 6.1, 6.1.1.1, 6.1.1.2, 6.2,
7
CIDB workshop by industry.
MS 1462-2-1 (a) Seamless : 6.2, 7.2, 7.3,
7.4, 7.6, 13 (b) Welded : 7.2, 7.3, 7.4, 7.6,
13
MS 1462-2-1
MS 862
MS 862 - Clause 10
MS 862 - Clause 12
MS 2381
MS 2381 - Clause 13
MS 2381 - Grade A : 5, 7, 7.2, 7.3, 8 10, 11, MS 2381 - Grade A : 5, 7, 7.2, 7.3, 10,
12, 17 Type E : 5, 7, 7.2, 7.3, 8, 9, 9.1, 10, 17 Type E : 5, 7, 7.2, 7.3, 10, 17 Type
S : 5, 7, 7.2, 7.3, 10 & 17
11, 12, 17 Type S : 5, 7, 7.2, 7.3, 8, 9, 10, 11,
12 & 17
MS 2381 - Clause 21
MS 2376
MS 2376 - Clause 15
MS 2376 - Clause 21
MS 2376 - Clause 6, 8, 9, 12
7306.90.xxx
MS ISO 3183
Clause 11
BS EN 10219
BS EN 10219 - Clause 10
JIS G3350
API 5L
Bridges and bridge sections. Need to verify the standard covers which
area??
MS 1462-1
API 5CT - Clause 10.4.3 Table C37, C38 & C39 API 5CT - Clause 10.3, 10.4, 10.5, 10.6, 10.7,
10.12, 10.13 & 10.13.5, 10.15
API 5CT
3.5
Not mentioned by std. Refer proposal during MS 1462-1 Clause 6.1, 6.1.1.1, 6.1.1.2, 6.2,
Structures (excluding prefabricated
7
buildings of heading 94.06) and parts
CIDB workshop by industry.
of structures (for example, bridges and
bridge-sections, lock-gates, towers,
lattice masts, roofs, roofing frameworks, doors and windows and their
frames and thresholds for doors,
shutters, balustrades, pillars and
columns), of iron or steel; plates, rods,
angles, shapes, sections, tubes and the
like, prepared for use in structures, of
iron or steel.
API 5L - Clause 11
MS 1462-1 - Clause 10
MS 1462-2-1
MS 1462-2-1 - Clause 12
MS 1862
Table 6
MS1862 - Clause 11
EN 39
(Superseded BS 1139)
Clause 9.1
Clause 12
JIS G3444
Clause 8.4.3
JIS G3350
7308.10.xxx
7308.20.xxx7308.40.xxx
MS 2025-1
MS 2025-2
MS EN 10025
Sheet Pile
Angles, shapes and sections
MS EN 10025 Part 2
MS EN 10025 Part 2
MS EN 10025 Part 2
EN 10029
(Delivery Condition)
EN 10048
Clause 11
EN 10051
Clause 7.2, 7.3 & 7.7
4.2
AS 1085-1&2
7301.10.xxx
7301.20.xxx
Need MS establishment..
JIS E 1103
DIN 536
7302.10.xxx
7302.40.xxx
7302.90.xxx
4.3
MS1919
BS EN 598:2007
4.4
BS EN 124:1994
7303.00.xxx
7325.10.xxx
7325.99.xxx
5
5.1
5.2
5.3
5.4
5.5
Wire Mesh
MS 144(PC)
B500A
MS 144 (PC)
G250
MS1138-2
5.8
7213.10.xxx
7213.91.xxx/ 7213.99.xxx
7213.91.xxx/ 7213.99.xxx
MS 1138-2 - Clause 6
7217.10.xxx
MS 1138- 3 - Clause 6
7312.10.xxx
7228.60.xxx
7312.10.xxx
7314.20.xxx
7214.20.910
7214.20.990
MS 146 (PC) - Clause 7.1, 7.3.3, 7.3.4, 7.3.5, MS 146 (PC) - Clause 7.1, 7.3.3, 7.3.5, Clause 10 & 11- Std numbers,
7.4.2, 7.4.3, 7.5, 7.5.2, 7.5.2.2, 7.5.2.3,
7.4.2
Manufacturer, Size, Batch numbers,
Other markings.
7214.20.xxx
MS 1138-3
PC Bar
MS ISO 2408
MS ISO 4344
MS 1138-4
MS 145(PC)
As per MS146(PC)
PC Strand
Bar
i. Steel for Reinforcement of Concrete (Round Bar-straight)
MS 144 (PC)
G250
ii.
MS EN 10025
S235JR, S235S275JR,
S275J0, S275J2, S355JR,
S355J0, S355J2, S355K2,
S450J0
MS 146 (PC)
Equal Angle
MS EN 10025
S235JR, S235S275JR,
MS 146 (PC) - Clause 7.1, 7.3.3, 7.3.4, 7.3.5, MS 146 (PC) - Clause 7.1, 7.3.3, 7.3.5,
Clause 10 & 11- Std numbers,
7.4.2, 7.4.3, 7.5, 7.5.2, 7.5.2.2, 7.5.2.3,
7.4.2
Manufacturer, Size, Batch numbers,
Other markings.
7216.21.xxx
7216.40.xxx
Seamless, welded and heavily cold ferritic and austenitic stainless steel pipes
and tubes and other construction purpose
MS 1841
ASTM A554
7306.11.xxx
7306.19.xxx
7306.21.xxx
7306.40.xxx
6.2
Welded austenitic stainless steel tubes for the conveyance of water and other
aqueous liquids - Technical Delivery Conditions
MS1988
JIS G 3448
NOTE: Colour in red need further clarifications through MS technical committee discussions.
7306.40.xxx