Beruflich Dokumente
Kultur Dokumente
1/2
HEMPINOLHB 10270
Description:
Recommended use:
Certificates/Approvals:
Availability:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Black/19990
Flat
62 1
1.4 m/litre - 450 micron
55 sq.ft./US gallon - 18.0 mils
38C/100F
1.2 kg/litre - 10 lbs/US gallon
24 (approx.) hours at 20C/68F
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max.vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Airless spray
Roller/brush (touch-up)
08080 (5%)
08230 (5%)
.021" - .031"
200 bar/2900 psi
(Airless spray data are indicative and subject to adjustment)
THINNER 08080
450 micron/18 mils (See REMARKS overleaf)
725 micron/29 mils
When dry
None (See REMARKS overleaf)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
HEMPINOL HB 10270
SURFACE
PREPARATION:
APPLICATION
CONDITIONS:
PRECEDING
COAT:
SUBSEQUENT
COAT:
None.
REMARKS:
Film thickness:
Note:
May be specified in another film thickness than indicated depending on purpose and area of use.
This will alter spreading rate and may influence drying time and recoating interval. Normal range is
350-550 micron/14-22 mils.
No maximum recoating interval, but before recoating after exposure in contaminated environment,
clean the surface thoroughly by high pressure fresh water hosing and allow to dry.
HEMPINOL HB 10270 is for professional use only.
ISSUED BY:
Recoating:
Page 2 of 2