Beruflich Dokumente
Kultur Dokumente
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
180
Todays era is of Information Technology. With the advent of the advance technologies in this field the
whole world is becoming very easily accessible. Electronic and Telecommunications is the mother branch
of IT. This branch is having wide scope in the public sector, Private sector as well as in Government
sector. The professionals of this field will find a very good future prospectus since so many multinational
companies are indented in the field of telecommunication.
This branch has tremendous applications such as Telephony, Telegraphy, Radio & TV broadcasting,
RADAR System, Satellite Communication, GSM/CDMA Technology, Sensor Networks, Biomedical
Engineering, Industrial Automation, Military etc. As such there is no limit to its applications and scope as
well. Every day you will find a new addition in the application of this field.
It is a versatile branch, in the sense that the students holding the degree in the Electronic and
Telecommunications can build up his carrier in any field such as Electronics, Computer Engineering,
Information Technology and Telecommunication etc. Our motto is to build up students who will be
equally competent in all these fields. Keeping this in mind, we have expert teacher and have developed
well-equipped advanced laboratories such as Computer Lab, Electronics Lab, High speed Internet Lab,
Telecommunication Lab, Electrical Lab to perform experiment and gain practical knowledge.
Summary of Courses
Types of Courses
University Requirement Courses
Interdisciplinary Courses
Core Courses (Compulsory)
Core Courses (Elective)
Total
No. of Courses
09
Credit Hours
009
04
62(Theory 36& Sessional 26)
06 (Theory 3 & Sessional 3)
81
008
132
12
161
No.
of
Courses
(7+3)=10
(7+5)=12
(7+3)=10
(6+3)=09
(6+3)=9
(7+4)=11
(8+3)=11
(5+5)=10
(53+29)=82
Theory
14
18
17
15
16
16
16
11
123
Credit Hours
Sessional
3
6
4.0
4.0
4
5
3.5
8.5
38
Total
17
24
21
19
20
21
19.5
19.5
161
Contact Hours/Week
Theory
Sessional
Total
18
6
24
18
12
30
18
8
26
15
8
23
17
8
25
17
10
27
16
7
23
12
15
27
131
76
205
Course No.
1
2
3
4
5
6
URAL-1101
UREL-1103
URIS-1101
URIS-1203
URIS-2303
URIS-3505
Course Title
Credit Hours
Theory Practical
Elementary Arabic
1
Advanced English
1
Islamic Aqidah
1
Introduction to Ibadah
1
Introduction to Quran and Sunnah
1
Government & Politics in Islam
1
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
181
SL
Course No.
Course Title
URIS-3607
URIH-4701
URBS-4802
Total
Credit Hours
Theory Practical
1
1
9
2
15
Course No.
ACC-2401
2
3
4
ECON-3501
MGT-3601
LAW- 4721
Total
Course Title
Credit Hours
Contact Hours/Week
2
2
2
8
2
2
2
8
Prerequisite
Courses
C. Core Courses
Credit Hours
SL
Course No.
01
MATH-1101
02
03
04
05
PHY-1101
PHY-1102
CSE-1101
CSE -1102
06
07
ETE-1103
ETE-1104
08
09
CE-1202
MATH-1203
10
11
12
13
14
15
PHY-1201
PHY-1202
CHEM-2301
CHEM-2302
ETE-1201
ETE-1202
16
17
ETE-1203
ETE-1204
18
19
20
ETE-1205
ETE-1206
MATH-2301
Course Title
Math I (Differential
Integral Calculas)
Physics I
Physics I Sessional
and
Computer Fundamentals
Computer
Fundamentals
Sessional
Electrical Circuits I DC
Electrical Circuits I DC
Sessional
Engineering Drawing
Math II(Complex Variable,
Fourier Analysis & Ztransform)
Physics II
Physics II Sessional
Chemistry
Chemistry Sessional
Computer Programming
Computer
Programming
Sessional
Electrical Circuits II AC
Electrical Circuits II AC
Sessional
Electronic Devices
Electronic Devices Sessional
Math
III(Differential
Equation)
Prerequisite
Course
Theory
3
Sessional
0
Theory
3
Sessional
0
3
0
2
0
0
1
0
1
3
0
2
0
0
3
0
2
3
0
0
1
3
0
0
2
0
3
1
0
0
3
2
0
3
0
3
0
3
0
0
1
0
1
0
1.5
3
0
3
0
3
0
0
2
0
2
0
3
PHY-1101
PHY-1102
3
0
0
1
3
0
0
2
ETE-1103
ETE-1104
3
0
3
0
1.5
0
3
0
3
0
3
0
ETE-1103
ETE-1104
MATH-1203
MATH-1103
ETE-1101
ETE-1102
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
182
Credit Hours
SL
Course No.
Course Title
Prerequisite
Course
Theory
2
3
0
3
Sessional
0
0
1.5
0
Theory
2
3
0
3
Sessional
0
0
3
0
ETE-1205
ETE-1206
ETE-1205
21
22
23
24
STAT-1201
ETE-2301
ETE-2302
ETE-2303
Statistics
Analog Electronics
Analog Electronics Sessional
25
ETE-2304
1.5
ETE-1206
26
27
ETE 2305
ETE 2308
3
1
0
0
3
1
0
0
MATH-1203
ETE-1201
28
29
30
MATH-2401
ETE-2405
ETE-2406
3
3
0
0
0
1.5
3
3
0
0
0
3
MATH-2303
31
ETE-2407
PHY-1201
32
33
34
ETE-2408
ETE-2409
ETE-2410
0
3
0
1
0
1.5
0
3
0
2
0
3
ETE-2301
ETE-2301
ETE-2302
35
MATH-3503
36
ETE-3503
ETE-2303
37
ETE-3504
ETE-2304
38
ETE-3505
ETE -2405
39
ETE-3507
ETE-2405
40
ETE-3508
1.5
ETE-2406
41
ETE-3509
ETE-2405
42
ETE-3510
1.5
ETE-2406
43
44
ETE-3601
ETE-3602
3
0
0
1.5
3
0
0
3
ETE-3507
ETE-3508
45
ETE-3603
ETE-3509
46
ETE-3604
1.5
ETE-3510
47
48
ETE -3605
ETE -3606
2
0
0
1
2
0
0
2
ETE-2301
ETE-2302
49
50
ETE-3607
ETE-3608
Cellular
Mobile
Communications
Cellular
Mobile
Communications Sessional
Electronic Measurement
Electronic
Measurement
Sessional
Control Systems
Control Systems Sessional
3
0
0
1
3
0
0
2
MATH -3503
MATH -2303
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
183
Credit Hours
SL
Course No.
51
52
53
ETE-3609
ETE-4701
ETE-4702
54
55
ETE-4703
ETE-4704
56
57
58
59
ETE-4705
ETE-4715
ETE-4800
ETE-4801
60
ETE-4802
61 ETE-4804
62 ETE-4821
Total
Prerequisite
Course
Course Title
Antenna and Propagation
Microwave Engineering
Microwave
Engineering
Sessional
Digital Signal Processing
Digital Signal Processing
Sessional
Satellite Communications
Research Methodology
Project/ Thesis
Optical
fiber
Communications
Optical
fiber
Communications Sessional
Industrial Tour /Training
General Viva Voce
Core Courses 62
Theory
3
3
0
Sessional
0
0
1.5
Theory
3
3
0
Sessional
0
0
3
ETE-2408
ETE-3601
ETE-3602
3
0
0
1
3
0
0
2
ETE-2305
ETE-2304
3
1
0
3
0
0
4
0
3
1
0
3
0
0
8
0
ETE-3603
1.5
0
1
1
0
97
0
1
36
ALL
ETE-3601
ETE-3602
1 week
0
96
ALL
69
1.
2.
3.
4.
5.
6.
Course
No.
ETE-4707
ETE-4708
ETE-4709
ETE-4710
ETE-4711
ETE-4712
7.
8.
ETE-4713
ETE-4714
SL
Course Title
VLSI Design
VLSI Design Sessional
Optimal & Adaptive control
Optimal & Adaptive control Sessional
Monolithic Microwave Integrated Circuit
Monolithic Microwave Integrated Circuit
Sessional
Artificial Neural Network
Artificial Neural Network Sessional
Credit Hours
Theory Sessional
3
0
0
1
3
0
0
1
3
0
0
1
3
0
0
1
Prerequisite
Course
0
2
Course
No.
1.
2.
ETE-4805
ETE-4806
3.
4.
5.
6.
ETE-4807
ETE-4808
ETE-4809
ETE-4810
SL
Course
No.
Course Title
Wireless Mobile Communications
Wireless
Mobile
Communications
Sessional
Embedded System Design
Embedded System Design Sessional
Advanced Digital Signal Processing
Advanced Digital Signal Processing
Sessional
Course Title
Credit Hours
Contact Hour/Week
Theory
3
0
Sessional
0
1
Theory
3
0
3
0
3
0
0
1
0
1
3
0
3
0
Credit Hours
Theory
Sessional
Sessional
0
2
0
2
0
2
Contact Hour/Week
Theory
Prerequisite
Course
Prerequisite
Course
Sessional
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
184
7.
8.
9.
10.
11.
12.
13
14
15.
16.
ETE-4811
ETE-4812
ETE-4813
ETE-4814
ETE-4815
ETE-4816
ETE-4817
ETE-4818
ETE-4819
ETE-4820
3
0
3
0
3
0
3
0
3
0
0
1
0
1
0
1
0
1
0
1
3
0
3
0
3
0
3
0
3
0
0
2
0
2
0
2
0
2
0
2
First Semester
SL
Course No.
Course Title
CSE-1101
CSE-1102
ETE-1103
ETE-1104
MATH-1101
Computer Fundamentals
Computer Fundamentals Sessional
Electrical Circuits I DC
Electrical Circuits I DC Sessional
Math I (Differential and Integral
5.
Calculus)
PHY-1101
Physics I
6.
PHY-1102
Physics I Sessional
7.
URAL-1101
Elementary Arabic
8.
UREL - 1103 Advanced English
9.
10. URIS 1101 Islamic Aqidah
Sub Total
(7+3 = 10) Courses
Total credit hour for 1st Semester is 17
1.
2.
3.
4.
Credit Hours
Theory
Sessional
2
0
0
1
3
0
0
1
3
0
3
0
1
1
1
14
0
1
0
0
0
3
Contact Hour/Week
Theory
Sessional
2
0
0
2
3
0
0
2
3
0
3
0
3
3
1
18
Prerequisite
Course
0
2
0
0
0
6
Second Semester
SL
Course No.
Course Title
11.
12.
13.
14.
15.
16.
17.
18.
ETE-1201
ETE-1202
ETE-1203
ETE-1204
ETE-1205
ETE-1206
PHY-1201
PHY-1202
MATH-1203
Computer Programming
Computer Programming Sessional
Electrical Circuits - II AC
Electrical Circuits II AC Sessional
Electronic Devices
Electronic Devices Sessional
Physics II
Physics II Sessional
Math II(Complex Variable, Fourier
Analysis & Z-transform)
20.
21.
STAT-1201
CE-1202
Statistics
Engineering Drawing
SL
Course No.
Course Title
19.
22.
URIS 1203
Introduction to Ibadah
Credit Hours
Theory
Sessional
3
0
0
1.5
3
0
0
1
3
0
0
1.5
3
0
0
1
3
0
2
0
1
Credit Hours
Theory
1
Sessional
0
Contact Hour/Week
Theory
Sessional
3
0
0
3
3
0
0
2
3
0
0
3
3
0
0
2
3
0
2
0
0
2
Contact Hour/Week
Theory
1
Prerequisite
Course
ETE-1101
ETE-1102
ETE-1103
ETE-1104
ETE-1103
ETE-1104
PHY-1101
PHY-1102
Sessional
0
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
Prerequisite
Course
URIS 1101
185
18
Sub Total
(7+5=12) Courses
Total credit hour for 2nd Semester is 24
18
12
Third Semester
SL
Course No.
Course Title
23.
24.
25.
ETE-2301
ETE-2302
ETE-2303
ETE-2304
ETE-2305
Analog Electronics
Analog Electronics Sessional
Digital Electronics & Logic Design
Digital Electronics & Logic Design
Sessional
Signals and Linear Systems
CHEM-2301
CHEM-2302
ETE 2307
Math-2301
URIS-2303
Chemistry
Chemistry Sessional
Numerical Methods
Math III(Differential Equations)
Introduction to Quran & Sunnah
26.
27.
28.
29.
30.
31.
32.
Sub Total
(7+3=10) Courses
Total credit hour for 3rd Semester is 21
Credit Hours
Theory
Sessional
3
0
0
1.5
3
0
0
1.5
3
Contact Hour/Week
Theory
Sessional
3
0
0
3
3
0
0
3
Prerequisite
Course
ETE-1205
ETE-1206
ETE-1205
ETE-1206
MATH1203
1
3
1
1
0
0
0
1
3
2
2
0
0
0
17
4.0
18
ETE-1201
Math-1101
URIS
1203
Fourth Semester
Course Title
SL
33.
34.
35.
36.
37.
38.
39.
40.
41.
Credit Hours
Contact Hour/Week
Course No.
ETE-2405
ETE-2406
ETE-2407
ETE-2408
ETE-2409
ETE-2410
MATH
2401
URIS- 3505
ACC 2401
Analog Communication
Analog Communication Sessional
Electromagnetic Fields and Waves
Design of Electronic Systems
Industrial Electronics
Industrial Electronics Sessional
Math IV (Linear Algebra, Matrices and
Vector Analysis)
Theory
3
0
3
0
3
0
3
1
2
15
Sessional
0
1.5
0
1
0
1.5
0
0
0
4
Theory
3
0
3
0
3
0
3
1
2
15
Sessional
0
3
0
2
0
3
0
0
0
8
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
Prerequisite
Course
ETE-1205
ETE-1206
PHY-1201
ETE-2301
ETE-2301
ETE-2302
Math-2301
-
186
Fifth Semester
Credit Hours
S
L
Course No.
42.
ETE-3503
43.
ETE-3504
44.
45.
46.
ETE-3505
ETE-3507
ETE-3508
47.
ETE-3509
48.
ETE-3510
Contact Hour/Week
Course Title
Microprocessor, Microcontroller and
peripherals
Microprocessor, Microcontroller and
peripherals Sessional
Information Theory & Coding
Radio & Television Engineering
Radio & Television Engineering
Sessional
Telecommunications Engineering
Telecommunications
Engineering
Sessional
49. ECON-3501
Principles of Economics
50. MATH-3503 Co-Ordinate Geometry and Higher
Trigonometry
Sub Total
(6+3=9) Courses
Total credit hour for 5th Semester is 20
Theory
3
Sessional
0
Theory
3
Sessional
0
Prerequisite
Course
ETE-2303
ETE-2304
3
3
0
0
0
1.5
3
3
0
0
0
3
ETE-2405
ETE-2405
ETE-2406
ETE-2405
1.5
ETE-2406
2
2
0
0
2
2
0
0
16
17
Sixth Semester
S
Course No.
L
51. ETE-3601
ETE-3602
52.
53.
54.
ETE-3603
ETE-3604
Course Title
Digital communications
Digital
communications
Sessional
Credit Hours
Theory
Sessional
3
0
0
1.5
Contact Hour/Week
Theory
Sessional
3
0
0
3
Prerequisite
Course
ETE-3507
ETE-3508
Cellular
Mobile
Communications
Cellular
Mobile
Communications Sessional
Electronic Measurement
Electronic
Measurement
Sessional
Control Systems
Control Systems Sessional
Antenna and Propagation
ETE-3509
1.5
ETE-3510
2
0
0
1
2
0
0
2
ETE-2301
ETE-2302
3
0
3
0
1
0
3
0
3
0
2
0
MATH 3503
Industrial Management
16
17
10
Biography of the
(SAW)
Sub Total
(7+4=11) Courses
Total credit hour for 6th Semester is 21
Prophet
ETE-2304
ETE-3507
-
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
187
Seventh Semester
S
Course No.
L
62. ETE-4701
63. ETE-4702
64. ETE-4703
ETE-4704
65.
66. ETE-4705
67. ETE-4715
68. ETE-47XX
69. ETE-47XX
70. LAW-4721
71. ETE-4800
URIH-4701
72.
Course Title
Microwave Engineering
Microwave Engineering Sessional
Digital Signal Processing
Digital
Signal
Processing
Sessional
Satellite Communication
Research Methodology
Elective I
Elective I Sessional
Credit Hours
Theory
Sessional
3
0
0
1.5
3
0
0
1
3
1
3
0
Contact Hour/Week
Theory
Sessional
3
0
0
3
3
0
0
2
0
0
0
1
3
1
3
0
X
1
X
0
X
1
X
0
16
3.5
16
0
0
0
2
Prerequisite Course
ETE-3601
ETE-3602
ETE-2305
ETE-2304
ETE-3603
Eighth Semester
S
Course No.
L
73. ETE-4800
74. ETE-4801
ETE-4802
75.
Course Title
Project/ Thesis
Optical fiber Communications
Optical fiber Communications
Sessional
76. ETE-4804
Industrial Tour /Training
77. ETE-48XX
Elective II
78. ETE-48XX
Elective II Sessional
79. ETE-48XX
Elective II
80. ETE-48XX
Elective II Sessional
81. URBS-4802
Bangladesh Studies
82. ETE-4821
General Viva
Sub Total
(5+5=10) Courses
Total credit hour for 8th Semester is 19.5
Total
Grand Total
81 Courses
52 Theory Course and 29
Sessional
Credit Hours
Theory
Sessional
0
4
3
0
0
1.5
0
3
0
3
0
1
1
11
123
= 161
Contact Hour/Week
Theory
Sessional
0
8
3
0
0
3
1
0
1
0
1
0
0
8.5
0
3
0
3
0
2
1
12
38
131
Prerequisite Course
Core Course
ETE-3601
ETE-3602
1 Week
0
2
0
2
0
0
15
74
= 205
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
188
SL.
Course No.
1.
2.
3.
4.
ETE-4707
ETE-4708
ETE-4709
ETE-4710
5.
ETE-4711
6.
ETE-4712
7.
8.
ETE-4713
ETE-4714
SL.
Course No.
Course Title
1.
ETE-4805
2.
ETE-4806
3.
4.
5.
6.
ETE-4807
ETE-4808
ETE-4809
ETE-4810
7.
8.
ETE-4811
ETE-4812
9.
10.
11.
12.
ETE-4813
ETE-4814
ETE-4815
ETE-4816
13
14
15.
16.
ETE-4817
ETE-4818
ETE-4819
ETE-4820
Credit Hours
Theory
Sessional
3
0
Contact Hour/Week
Theory
Sessional
3
0
3
0
3
0
0
1
0
1
3
3
0
0
2
0
2
3
0
0
1
3
0
0
2
3
0
3
0
0
1
0
1
3
0
3
0
0
2
0
2
3
0
3
0
0
1
0
1
3
0
3
0
0
2
0
2
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
Prerequisite
Course
Prerequisite
Course
189
Course Code:ACC-2401
Credit Hours: 2
Objectives: In this course student learn about Law and Professional Ethic in regards to nature and
concept of law, company law, labor law, history and development of engineering ethics, ethical
expectations and cyber law.
Section-A
(Mid-term Exam: 30 Marks)
1. Law Basics: Nature and concept of law. Schools of Jurisprudence: Analytical, Historical,
Philosophical, Sociological & Natural. Administration of Justice: Theories of punishment. Sources of
Law: Custom, Precedent and Legislation. Rights and Duties, Legal Personality, Ownership and
Possession, Definition and theories of Law, principles of law of contract, agency, partnership, sale of
goods negotiable instruments, insurance and insolvency.
2. Company law: The companies act with special reference to the amendments and ordinances applicable
to Bangladesh. Law regarding formation, Incorporation, Management and winding up of companies.
3.Labor Law: The scope and sources of labor law. Law in relation to wages, hours, health, safety and
other condition to work. The legislation effecting employment in factories. The trade union legislation
arbitration, the policy of the state in relation to labor. Elementary principles of labor law.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
190
Section-B
(Final Exam: 50 Marks)
Group-A (20-Marks)
4. History and Development of Engineering Ethics: Study of Ethics in Engineering. Applied Ethics in
engineering. Human qualities of an engineer. Obligation of an engineer to the clients and to other
engineers. Measures to be taken in order to improve the quality of engineering profession.
5. Ethical Expectations: Employers and Employees inter-professional relationship, maintaining a
commitment of Ethical standards. Desired characteristics of a professional code. Institutionalization of
Ethical conduct.
Group-B (30-Marks)
6. Cyber Law Introduction: The need for Cyber Law , Regulation of Technology and Internet , The
Internet and the Problems of Geography and Sovereignty , Freedom of Expression on the Internet,
7. The Relationship between Legal and Technological Regulation: Intellectual Property: Copy rights,
Trade Marks, Industrial Designs. Electronic and Digital Signature. Embedding Law into Technology.
Electronic Contract.
8. Liability of Internet Intermediaries: Defamatory Content, Privacy, Copy right, Infringement.
Liabilities relating to electronic financial transaction. Nature and scope of cyber crime, Regulation of
Cyber Crime. Offences and Punishment of Technology Crimes. B
Recommended Books:
1
A. K. Sen
A Hand Book of Commercial Law.
2
A. A. Khan
Labour and Industrial Law.
3
J. D. Mabboth
An Introduction to Ethics
4
Stacey L. Dogan
Copyright in Cyberspace: An Introduction
5
A. B.Siddique
The Law of Contract.
6
Emile Durkheim
Professional Ethics and Civics Morals
7
Jonathan L. Zittrain,
Internet Law: Technological Complements to Copyright
8
Coopers
Outline of Industrial Law.
9
A. Zulfiquar
V A Text Book on the Bangladesh Labour Act-2006.
10 P. Narayanan
Intellectual Property Law.
11 A. R. Khan
Business Ethics
12 G. E. Moore:
Principia Ethicia
13 M. Radar
Ethics and the Auman Community
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
191
Objective: The objective of this course is to introduce the fundamental ideas of the finance and marketing
for engineers.
1.
2.
3.
4.
5.
6.
7.
8.
Part A
Financial reporting process and uses of accounting data, linkages between accounting information and
management planning, decision-making and control.
Traditional cost accounting concepts such as product costing, cost terminology, budgeting, cost
volume-profit analysis, and standard costs,
Non-traditional management accounting topics such as variable costing and activity based costing.
Basic engineering economy along with capital asset pricing, debt versus equity decisions,
Part B
Cost of capital, financial leverage, and the management of working capital.
Financial justification of operational "intangibles" such as shorter lead times, better quality, and
improved customer responsiveness.
Marketing Principles, strategic marketing, types of market and buyer behavior, product strategies,
Marketing decisions (price, channel, advertising, sales force), market research, and international
marketing.
Objective: The objective of this course is to introduce the fundamental ideas of the soiology.
Scope, Social evolution and techniques of production; Culture and civilization; Social structure of
Bangladesh; Population and world resources; Oriental and occidental societies, Industrial revolution;
Family- urbanization industrialization; Urban ecology, Co-operative and socialist movements, Rural
sociology
Course Code: PSY-4705
Credit Hours: 2
Objective: The objective of this course is to introduce the fundamental ideas of the psychology.
Introduction to psychology, Cognitive science; Reasoning, Object recognition and language
Understanding, Learning industrial psychology; Introduction to job and analysis, Methods of selection;
Training in industry; Motivation and work, Job satisfaction, Introduction to ergonomics, System
engineering, Accident and safety.
Course Code: LAW-4707
Credit Hours: 2
Objective: The objective of this course is to introduce the fundamental ideas of the business and cyber
law.
Principles of law of contract; Company law: law regarding formation, incorporation, management and
winding up of companies; Labor law; Law in relation to wages hour, heath, safety and other condition to
work; The trade union legislation arbitration, the policy of the state in relation to labor; The factory Act
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
192
Objective: The objective of this course is to introduce the fundamental ideas of the government.
Some basic concepts of government and politics, Functions, Organs and forms of modern state and
government; Socialism; Fascism; Marxism; U.N.O.; Government and politics of Bangladesh; Some major
administrative systems of developed countries; Local self-government.
Objective: The objective of this course is to introduce the fundamental ideas of the law and professional
ethics.
Section-A
(Mid-term Exam: 30 Marks)
1. Law Basics: Nature and concept of law. Schools of Jurisprudence: Analytical, Historical,
Philosophical, Sociological & Natural. Administration of Justice: Theories of punishment. Sources of
Law: Custom, Precedent and Legislation. Rights and Duties. Legal Personality. Ownership and
Possession. Definition and theories of Law, Principles of law of contract, agency, partnership, sale of
goods negotiable instruments, insurance and insolvency.
2. Company law: The companies act with special reference to the amendments and ordinances
applicable to Bangladesh. Law regarding formation, Incorporation, Management and winding up of
companies.
3. Labor Law: The scope and sources of labor law. Law in relation to wages, hours, health, safety and
other condition to work. The legislation effecting employment in factories. The trade union legislation
arbitration, the policy of the state in relation to labor. Elementary principles of labor law.
Section-B (Final Exam: 50 Marks)
Group-A (20-Marks)
4. History and Development of Engineering Ethics: Study of Ethics in Engineering. Applied Ethics in
engineering. Human qualities of an engineer. Obligation of an engineer to the clients and to other
engineers. Measures to be taken in order to improve the quality of engineering profession.
5. Ethical Expectations: Employers and Employees inter-professional relationship, maintaining a
commitment of Ethical standards. Desired characteristics of a professional code. Institutionalization
of Ethical conduct.
Group-B (30-Marks)
6. Cyber Law Introduction : The need for Cyber Law , Regulation of Technology and Internet , The
Internet and the Problems of Geography and Sovereignty , Freedom of Expression on the Internet,
7. The Relationship between Legal and Technological Regulation: Intellectual Property: Copy rights,
Trade Marks, Industrial Designs. Electronic and Digital Signature. Embedding Law into Technology.
Electronic Contract.
8. Liability of Internet Intermediaries: Defamatory Content, Privacy, Copy right, Infringement.
Liabilities relating to electronic financial transaction.
9. Cyber Crime: Nature and scope of cyber crime, Regulation of Cyber Crime. Offences and
Punishment of Technology Crimes.
Books Recommended:
Text Books:
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
193
1.
A. K. Sen: A Hand Book of Commercial Law.
2.
A. B.Siddique: The Law of Contract.
3.
A. A. Khan: Labour and Industrial Law.
4.
Emile Durkheim:Professional Ethics and Civics Morals.
5.
J. D. Mabboth: An Introduction to Ethics.
6. Jonathan L. Zittrain, Internet Law: Technological Complements to Copyright
7. Stacey L. Dogan: Copyright in Cyberspace: An Introduction
Reference
1.
A. G. Maitra: Laws of Contract.
2.
Coopers: Outline of Industrial Law.
3.
A. Zulfiquar: A Text Book on the Bangladesh Labour Act-2006.
4.
P. Narayanan: Intellectual Property Law.
5.
The Patent and Design Act, 1911.
6.
A. R. Khan: Business Ethics.
7.
M. Radar:Ethics and the Auman Community.
8.
G. E. Moore : Principia Ethicia.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
194
C. Core Courses
Course Code: MATH-1101
Credit Hours: 3
Please see at page no 32 for details.
Recommended Books:
1. Glyn James
2. Michael D. Greenberg
3. K.A.Stroud
4. H. K Das
5. M. R Spigel
6. M. R. Spigel
7. Laplaces Transformation
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
195
196
Thomas, Finey
K.A. Stroud
P. K. Bhattacharjee
M. L. Khanna
JT bell
S.L. Loney
A.Sattar
Physics
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
197
1.
2.
3.
4.
Book Recommended:
1. Dr. Giasuddin Ahmad and Md. Shahabuddin
: Practical Physics
Course Code: Chem-2301
Course Title: Chemistry
Credit Hours: 3
Contact Hours: 3 per Week
Objective: The objective of this course is to introduce the fundamental ideas of Chemistry.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
198
P. K. Sinha
N. Subramanian
V. Rajarcman
Peter Norton
Satish Jain
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
199
Course Contents:
Experiment No. 1: Operating System: Proposed Operating Systems: Windows 2000/XP, MS-DOS
Topics: Files, Folders, Basic operations on file/folders, File System, Windows OS Organization and
Hierarchy, Searching files and folders.
Experiment No. 2: Word Processing: Proposed Application Software: Microsoft Word Topics:
Formatting, Table Editing, Picture, Clipart and object.
Experiment No. 3: Charts, Drawing, Text box and shapes, Hyperlink, Macro, Equation editor etc.
Experiment No. 4: CV Design, Application/Letter writing/formatting.
Experiment No. 5: Spreadsheet Analysis: Proposed Application Software: Microsoft Excel Topics: Basic
idea, Cell formatting, Equation, Function, Different sheet data calculation.
Experiment No. 6: Grade sheet calculation, Salary Sheet calculation.
Experiment No. 7: Slide Oriented Presentation: Proposed Application Software: Microsoft Power Point
Topics: Hyperlinks, Slide window detail, Audio, Video, Animation, Slide transition.
Experiment No. 8: Simple slide based presentation (topics are free of choice).
Experiment No. 9: Database Application: Proposed Application Software: Microsoft Access Topics:
Database basics, Field, Table,
Experiment No. 10: Database Keys, ER Diagram, Form, Report, and Query.
Experiment No. 11: Address book (Insert, Update, Delete, and Search).
Experiment No. 12: Topics: Installing/binding a new computer system, Installing operating system and
other software.
Experiment No. 13: Internet Topics: Browsing Concepts, Searching in the web, Email.
and to perform also other experiments relevant to this course.
Text Book:
Peter Nortons Complete Guide to MS Windows 2000 Professional
References:
1.
2.
3.
4.
5.
6.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
200
Course Contents:
Laboratory works based on ETE 1103
Course Code: CE-1202
Course Title: Engineering Drawing
Credit Hours: 1
Contact Hours: 2 per Week
Objective: The objective of this course is to introduce the fundamental ideas of the engineering drawing
1. Introduction orthographic projection: Scale drawing, Sectional view, Top and side view
Isometric views, Missing line, Auxiliary view, Pictorial views.
2. Drawing standard and practices: Interpenetrating of surface, Development of surfaces,
Machine drawings, and Technical sketching.
3. Introduction to Computer aided design (CAD): Project on Engineering Drawing and CAD
using Contemporary packages in engineering drawing.
Books Recommended:
1.
Engineering Graphics 3rd Edition: Fredw Rick E Giesecke, Alva Mitchell, Henry C.
Spencer, Ivan L. Hill, Robert O.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
201
References:
1.
2.
3.
4.
5.
Byron S. Gottfried
: Theory and Problems of Programming with C.
E. Balagurusamy
: Programming in ANSI C.
C Kernighan & D.M. Ritchie
: The C programming Language.
H.M. Deitel
: C how to program.
Herbert Schild
:Teach Yourself C
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
202
Course Contents:
1. Write a program to calculate the roots of the quadratic equation ax2 + bx + c = 0 where a, b and c are
known.
2. Write a program that reads a year from the keyboard and determine whether it is a leap year or not.
3. Write a program that reverses the digits of a given integer.
4. Write a program to compute the sum up the digits of positive integer N.
5. Write a program to find N is prime or not.
6. Write a program to determine the value of the Nth Fibonacci number Fn
Where Fn = Fn-1 + Fn - 2 and F1 = F2 = 1
7. Write a program that receives the score of a student and display the grade.
8. Write a program to read multiple lines of text from the keyboard and write it out to a data file called
TEST.DAT.
9. Write a program to write 100 integers to a file called RAND. DAT.
10. Write a program using structure that will allow you to enter and display the following information
about your family members:
i) name ii) address iii) age iii) occupation iv) salary
11. To perform also other experiments relevant to this course.
Course Code: ETE 1203
Course Title: ELECTRICAL CIRCUITS II AC
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the AC electrical circuits
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1) Alternating current, AC quantities, Sinusoidal waveforms,
2) AC circuits, AC Power and Power factor.
3) Network theorems.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4) Resonance and Q-factors,
5) Balanced Polyphase systems
Group-B (30 Marks)
6) Unbalanced Polyphase systems,
7) Coupled circuits,
8) Filters, Transients in AC circuits.
Course Code: ETE 1204
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 1203
Course Code: ETE 1205
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
203
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the electronic devices.
Course Contents
Section A
(Mid-term Exam: 30 Marks)
1. Semiconductors materials: Classification of material in terms of energy band, Extrinsic material and
Intrinsic material, Electrons and holes in an intrinsic semiconductor, Donor and acceptor impurities,
mobility, Hall effect, structure of N-type and P-type materials and their conductivity.
Density of States and Fermi Dirac function. Calculation of Carrier Concentration, Drift of carriers,
Mobility, Carrier Diffusion, Einstein Relation, Generation and Recombination, Excess carriers, QuasiFermi level, Basic Semiconductors Equations
2. P-N junctions Diode: Formation of P-N junction, Depletion layer formation, PIV of Diode, Diode V-I
characteristics, Small signal model of diode, transition and diffusion capacitance,
3. Applications of diodes: Circuit applications of diode, Rectifiers, Filter circuit, voltage doubler,
Voltage tripler, Clamper and Clipper. Zener diode, LED, Photodiode, varactor diode, photo resistor,
Crystal diode and Solar Cell.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Bipolar Junction Transistors: Working principle of N-P-N and P-N-P transistor,V-I Characteristics
of trnasistor , Different configuration of transistors amplifiers, input and output Characteristics, Cutt off
and Saturation region, Load line analysis.
5. Transistor biasing: Various baising method, Conditions of proper transistor biasing, Stability factor,
Thermal stabilization.
Group-B (30 Marks)
6. Small Signal model of Bipolar transistor: Small signal low frequency h-parameters, Determinations
of Hybrid parameters in CE, CC and CB configurations.
7. Field Effect Transistor: introduction, JFET, MOSFET, PMOS, NMOS, CMOS and their switching
characteristics.
8. Small Signal model of FET: Small signal model for JFET, MOSFET and biasing of JFET and
MOSFET.
Text Book:
1. Boylestred R and Nashelsky, Electronic Devices and Circuits Theory, PHI, 1993.
Reference Books:
2. Millman & Halkias,"Electronic Devices & Circuits", Tata McGraw Hill, 1995.
3. Malvino A P, Electronic Principles, McGraw Hill International, 1998.
4. David.A.Bell, "Electronic Devices & Circuits ", PHI, 1998.
5. Somanath Nair ,"Electronic Devices and Applications PHI 2002
Course Code: ETE 1206
Credit Hour: 1.5
Course Contents:
Laboratory works based on ETE 1205
Course Code: ETE 2301
Course Title: ANALOG ELETRONICS
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the analog electronics.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
204
Course Contents
Section A
(Mid-term Exam: 30 Marks)
Transistors at high frequencies: Hybrid-pi model, CE short circuit current gain, Current gain with
resistive load, Single stage CE transistor amplifier response, High frequency model JFET and MOSFET.
Feedback Amplifiers: Classification, Feedback concept, Topologies, Effect of feedback on transfer gain,
Loop gain, Amplifier Characteristics, Types of Feedback, Negative feedback Amplifiers and their
application.
Sinusoidal Oscillators: Conditions of self oscillations phase shift resonant circuit, Colpitts and Hartley
Oscillators, WEIN Bridge and Crystal Oscillator. introductions, monostable, bistable and Astable
multivivrator, Smith trigger, blocking oscillator.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
Pulse Shaping Circuit: High pass and low pass RC circuits ( sinusoidal, step voltage, pulse square wave
exponential and ramp inputs ), high pass RC circuit as a differentiator, The low pass RC circuit as a
integrator.
Multistage amplifiers: The R-C coupled amplifiers, Low and High frequency response of R-C coupled
amplifiers, Effect of harmonics on Amplifiers. Class A, Class B and Push pull amplifiers, Tuned Voltage
and Power amplifier.
Group-B (30 Marks)
Regulated power supply: Zener diode as a voltage regulator, Shunt and Series voltage regulator and
Emitter follower regulator, Step Up and Step down switching mode power supply
IC fabrication: Introduction to IC fabrication techniques, Advantages and disadvantages of IC,
Transistor fabrication, FET fabrication, diode, capacitor, resistor fabrication, MOSFET fabrication
Operational Amplifiers: Ideal OP-AMP, Bias voltage , Offset voltage, Slew rate, Inverting and Non
inverting amplifiers, Phase inverters, Scale changer, Integrating and Differentiating circuits, Adder or
Summing amplifiers, Voltage to Current, Current to Voltage converters, Voltage follower Differential
Instrumentation and Bridge amplifiers, AC performance of OP-AMP; Bandwidth, Noise and Frequency
compensation, Active filters. zero crossing detectors and voltage level detectors.
Text Book:
1. R.L. Boylestad : Electronic Devices & Circuit Theory
Reference Books:
1. J. Millman
: Electronic Devices & Circuits
2. Gupta & Kumar. : Hand book of Electronics
Course Code: ETE 2302
Credit Hour: 1.5
Course Contents:
Laboratory works based on ETE 2301.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
205
: Switching Theory
: Digital Systems
Reference Books:
Course Contents:
Laboratory works based on ETE 2303
Course Code: ETE 2305
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
206
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the signals and linear
systems.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Introduction to Signals:
Signal classifications: Continuous, discrete, stochastic, even-odd signals, mathematical models of ideal
signals. Elementary/test signals, power and energy signal. Response of test signals to LTI systems. Linear
convolution and its properties. Discrete time elementary sequences: Delta sequence, unit step sequence.
Representation of arbitrary sequence by elementary sequences. Discrete time convolution. Connections
between input- and output signal: convolution, difference equations.
2. Frequency analysis and transformer
Fourier series and Fourier transformer of continuous-time and discrete-time signals
Parsevals relation
Frequency characteristics of linear time-invariant systems and frequency content of signals.
Sampling of continuous-time signals
The sampling theorem, folding and reconstruction,
A/D- and D/A-conversion.
3. Discrete Fourier transforms (DFT)
Sampling in the frequency plane
Discrete Fourier transform (DFT),
Fast Fourier transform (FFT) and its applications.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Application of Fourier series
Applications of time and frequency domain analyses: solution of analog electrical and mechanical
systems, amplitude modulation and demodulation, time-division and frequency-division multiplexing.
5. Laplace transformation
Laplace transformation: properties, inverse transform, solution of system equations, system transfer
function, system stability and frequency response and application.
Group-B (30 Marks)
6. Application of Laplace transform
Application of Laplace transform to network analysis: Network functions, natural frequencies, concept of
poles and zeros, their locations on the s-plane. Frequency response plots. Initial and final values.
7. Z-Transform:
Z-transform, Inverse Z-transform, Theorems and properties, System functions
8. Filters
Introduction, types of filters, approximations: Butterworth and Chebyshev filters
Reference Books:
1. Rakesh.R & N.C. Sahoo., Circuit and Signals Prentice Hall, Malaysia. 2004
2. Narasingh Deo, "Graph Theory, with Applications to Engineering and Computer
Science", Prentice Hall, 2000.
3. I J Nagrath et. al, "SIGNALS AND SYSTEMS" Mc-Graw Hill, Singapore, 2001, ISBN
0-07-12027 1-4.
4. William H. Hayt, Jr and Jack E. Kemmerly, "Engineering Circuit Analysis" Mc GrawHill International Edition, 2001.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
207
Course Contents:
Group A
1.Errors in Numerical Calculations:
Significant figure, rounding off numbers, Error in Numerical Calculation
2.Roots of Nonlinear Equation:
Solution of Algebraic and Transcendental Equation
3.Interpolation:
Interpolation with equal and unequal intervals- Missing values, Newtons binomial expansion formula,
Newtons forward and backward interpolation formula. Central difference interpolation formulae, inverse
interpolation.
4.Numerical Differentiation:
Derivates using Newtons forward backward and Starlings formula.
Group B
5.Numerical Integration:
General quadrature formula for equidistant ordinates. Trapezoidal rule, Simpsons one-third rule,
Simpsons three-eight rules, Weddles rule.
6.Numerical solution of ordinary differential equations:
Taylors series method, Eulers method, Adams Back forth Moulton method, Runge-Kutta method.
7.Solution of linear equations:
Gauss-elimination method, Iteration methods. Gauss-Seidel method, Gauss-Jordan method.
8.Curve Fitting:
objective of fitting a curve, fitting a straight line, fitting a parabola
Text Book:
1. S.S Sastry
Reference Books:
1.
2.
3.
4.
5.
:Numerical Analysis
:Numerical Methods
:Numerical Analysis, New Age International (P) Limited
: The Engineering of Numerical Software.
: Simplified FORTRAN Guide.
208
communication.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Modulation: definition, importance, types
Amplitude modulation: system description, generation & detection, different AM systems DSB-SC,
SSB.
2. Vestigial sideband Modulation process & application, Frequency mixing and multiplying, frequency
division multiplexing, super heterodyne principles, Application of AM systems, Am broadcast band
specification.
3. Angle modulation systems: Instantaneous frequency, frequency deviation, modulation index,
Significant sideband criteria, bandwidth of Angle modulation, power of an FM signal, narrowband FM,
wideband FM, FM generation
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Principle of Phase Lock loop, FM demodulation, limiter, pre-emphasis, de-emphasis, FM transmitter &
receiver, FM broadcast specification.
5. Noise waveforms and characteristics, noise sources, thermal noise, burst noise, shot noise, white
thermal noise, noise voltage and power, equivalent noise temperature and bandwidth.
Group-B (30 Marks)
6. Analysis of noise effects on baseband systems, Amplitude modulation and Angle modulation.
7. VHF and microwave link, digital modulation ASK, FSK, PSK, DPSK, QPSK detail description of
themselves.
8. Match filter and correlation receiver, error probabilities.
Course Code: ETE 2406
Credit Hour: 1.5
Course Contents:
209
210
7. Design of data acquisition system for monitoring and control of temperature, humidity, soil
moisture and light.
8. Design of sequential and combinational logic Design Design of counters using 7490, 92, 93,
741190, 191, 192, 193.
9. Design of multiplexers and de-multiplexers using ICS.
10. Design of frequency counters using ICs, Design of frequency synthesizer using CMOS counter
ICS & PLL.
11. Design of relay type AC voltage stabilizers.
12. Design consideration for Electronic equipments Mechanical Design, thermal design, PCB
design & reliability.
Text Book:
1. System Design using integrated circuits by BS Sonde
Reference Books:
1.
2.
3.
4.
5.
6.
7.
211
8. SCR speed control circuits for PM/Shunt motors; Simple SCR plus UJT control circuits, Series /
universal motor control circuit using SCR (half wave control) & TRIAC and DIAC (full wave control);
motor speed control circuit using inverter.
Text Books:
1. Schuler and McNamce,Industrial Electronics and Robotics, Tata McGraw-Hill, Singapore.
2. P.C. Sen, Power Electronics, Tata McGraw-Hill, publishing company Ltd. 1987(1994) New
Delhi, India
3. Cyril W.Lander, Power Electronics, McGraw-Hill, publishing company,(UK), London,1981.
4. Muhammad Harunur Rashid,Power Electronics Handbook.
Course Code: ETE 2410
Credit Hour: 1.5
Course Contents:
Laboratory works based on ETE 3501
Course Code: ETE 3503
Course Title: Microprocessor Microcontroller And Peripherals
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the microprocessor,
microcontroller and peripherals.
Course Contents:
Introduction to Microprocessor
Section A
(Mid-term Exam: 30 Marks)
1. Basic architectures Von-Neumann and Hardwired, Evolution of Microprocessors, Computer
generations and classifications, Mainframe, Mini, Micro and super computers, Microcomputer block
diagram, different input output devices, different memory devices (Primary and Secondary).
2. Difference between microprocessor, microcomputer, microcontroller. Concept of
multiprogramming multiprocessing, multi user system, parallel processing.
Microprocessor 8085, 8086 and 80386
3. Pin-out diagram and pin description, Architecture, Instruction and data flow, addressing modes,
Instruction fetch & execute, machine cycles, instruction cycle, timing diagrams, state transition
diagram, instruction groups and instruction set.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Assembly language programming: Simple arithmetic programs, data transfer array,
string, bit manipulation, code conversion, delay routine and stack operations.
I/O interfacing and Memory System Design
5. Address design need of I/O, ports I/O, mapped I/O, memory mapped I/O, data transfer schemes
PPI
8255 its modes, interface, initialization and programming.
Group-B (30 Marks
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
212
6. Interfacing of key, L. E. D., seven segment, Dot matrix display, ADC 0808, and DAC 0809, with
PPI 8255, address decoder and memory system design interface, stepper motor controller interfacing with
8255.
Peripheral Devices
7. 8251, 8253, 8257, 8279, interface with 8085, initialization and application oriented programming.
Data transfer schemes.
8. Interrupts SIM/RIM, PIC 8259 interface, initialization and programming with 8085, Micro
Processor System Design, 8085 applications such as: Programmable Logic Controller, Temperature
controller,
Text Book:
1. Microprocessor Architecture, Programming And ApplicationsGaonkar, Willey
Eastern Publications.
Reference Books:
1. Microprocessor and Programmed Logic--K.L.Short, 2nd Edition Pearson
Education.
2. Fundamentals of Microprocessor & Microprocomputers-- B. Ram, TMH.
3. Microprocessor and Digital System Dougles Hall- TMH.
4. Intels Data Manuals.
5. Microprocessor H/W Interfacing and Application Bray CBS
6. Microprocessors and PeripheralsB. Venkatramani, TMH.
7. The 8051 Microcontroller And Embedded Systems- Mazidi and Mazidi
Prentice-Hall Inc., U.S.A., 2000
8. Design with Microcontrollers - John B. Peatman, McGraw-Hill, U.S.A., 1988.
9. The M68HC11 Microcontroller: Applications in Control, Instrumentation, and
Communication- Michael R. Kheir, Prentice-Hall Inc., U.S.A., 1997
Course Code: ETE 3504
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 3503
213
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Information Sources and Sources Coding
Logarithmic measure for information, self and average information. Entropy, information rate, discrete
sources, extensions of a discrete source, Shannons source coding theorem.
2. Markov source. Joint and conditional entropy. Source coding theorem and algorithms. Kraft inequality,
Huffman code, prefix code,
3. Lempel-Ziv code, rate distortion theory. Scalar and vector quantization, waveform coding. Orthogonal
Codes, biorthogonal Codes. Simplex Code. Application examples: MPEG audio compression, JPEG
image compression standard and MPEG video compression.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Channel Capacity and Coding, Discrete channels, mutual information, Properties of Mutual
Information, channel capacity, Shannons channel coding theorem, bandwidth-S/N trade-off. Channel
capacity theorem.
5. Model of digital communication system employing coding. History of Coding, Types of Coding, Types
of Decoding, Types of Error Control, Code Rate and Redundancy, Hamming distance, Hamming weight,
Hamming bound. parity check codes, Hamming codes, Cyclic Codes.
Group-B (30 Marks)
6. Linear block codes, generator and parity check matrix, syndrome decoding. Cyclic codes, generation
and detection. Coding for reliable communication, coding gain, bandwidth expansion ratio. Comparison
of coded and uncoded systems.
7. Convolutional Codes, Encoding, Encoder representation, impulse Response of the Encoder, polynomial
Representation, state representation and the State Diagram, Code tree, Trellis diagram.
8.Decoding of convolutional codes, Veterbis algorithm, sequential decoding. Transfer function and
distance properties of convolutional codes. Error Correction Capability of Convolutional Codes, Coding
gain. Application example: GSM systems.
Text Book:
1. N. Abramson, "Information Theory and Coding", McGraw-Hill, 1963.
2. Bernard Scalar, Digital Communication System
Reference Books:
1. C.E. Shannon, "A Mathematical Theory of Communications", Bell System Tech.
Journal, Vol. 27, July and Oct. 1948.
2. W.W. Peterson and E.J. Weldon, "Error-Correcting Codes", MIT Press, 1972.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
214
215
216
Course Contents:
Laboratory works based on ETE 3509
Course Code: ETE 3601
Course Title: Digital Communications
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the digital
communications.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1) Introduction to Digital Communications
Digital vs. analog communications, digital communication block diagram, classification of signals,
spectra and filtering, signal transmission through linear systems,
2) Orthogonal functions, random processes, autocorrelation, power spectrum, systems with random
input/output, bandwidth of digital data, Information Capacity Theorem revisited, bandwidth-efficiency
diagram.
3) Pulse Modulations and Digitization of Speech Signals
Pulse amplitude modulation, pulse width modulation, pulse position modulation, time division
multiplexing. Sampling theorem, sample-and-hold,
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4) pulse code modulation (PCM), quantization noise, narrowband noise, Companding, differential PCM,
delta modulation, overload noise, adaptive delta modulation.
5) Baseband Data Transmission
Line coding, intersymbol interference, Nyquist theorem, eye pattern, adaptive equalization.
Transmission over bandpass channels: complex envelope representation of bandpass signals, signal space
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
217
analysis,
Group-B (30 Marks)
6) Digital Modulation Techniques
ASK, FSK, PSK, DPSK, M-ary modulation, continuous phase FSK, MSK. Coherent and non-coherent
demodulation, multiple access techniques, CDMA for wireless communications, near-far problem in
CDMA, Rake receiver, handoff process in cellular communications, application examples.
7) Performance of Digital Communication Systems
Statistical properties of noise and random signals. Gaussian noise, detection of binary signals in Gaussian
noise, matched filter receiver, error function, probability of error calculation, error rates in binary and Mary transmission, error analysis of PCM repeater systems,
8) Spread Spectrum Communications
Brief history of spread spectrum communications, generation of pseudo noise sequences, properties of Msequences, direct sequence spread spectrum, processing gain, jamming margin, frequency hopping spread
spectrum,
Course Code: ETE 3602
Credit Hour: 1.5
Course Contents:
218
219
6. Wave analyzers, Harmonic Distortion analyzer, Spectrum analyzer logic & signature analyzer. Network
Analyzer, Swept frequency generator, Frequency synthesizer.
7. Measurement on Audio/Video amplifier, Measurement on Transmitter/Receiver Measurement of
microwave frequencies RF/UHF.
8. Fiber optic power measurement, Fiber System loss modulation measurement Bolo meter, optical
sources, optical detectors, optical transducer, fiber optic sensors & its advantages.
Course Code: ETE 3606
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 3605
Course Code: ETE 3607
Course Title: Control Systems
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the control systems.
Course Contents:
Section A
(Mid-term Exam: 30 Marks
1. Introduction to Control Systems: Definition, examples of control systems. Open-loop and closedloop control systems. Review of Laplace and inverse Laplace transforms.
2. System Modeling: Mathematical model of Mechanical, electrical and electromechanical systems.
First and second order models, higher order models.
3. Transient Response Analysis: Definitions of transient response parameters. Analysis of second-order
system as prototype. Routh-Hurwitz stability criterion.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Steady-state Error Analysis: Classification of systems based on steady-state characteristics, steadystate error coefficient.
5. Multiple Subsystem reduction: Signal flow graph, block diagram. Transfer function. Poles and zeros.
Block diagram reduction using signal flow graph and block diagram reduction techniques.
Group-B (30 Marks)
6. Root Locus Method: Definition of root locus, Properties of root locus, sketching of root locus plots.
Effect of open-loop zeros and poles. Root locus design concepts.
7. Frequency Response Analysis: Bode diagram, Polar plot, Nichols plot. Nyquist stability criterion:
non-mathematical description of Nyquist criterion, interpretation of stability. Relative stability - Gain and
phase margins. Closed-loop frequency response analysis - M and N contours, Nichols chart.
8. Compensation techniques: Lag, lead and lag-lead compensation, PD, PI and PID controllers. Cascade
compensation based on root-locus method. Introduction to Feedback compensation.
Text Book:
Control Systems Engineering, 4th edition, 2004 (ISBN: 0471445770), Norman S. Nise, Wiley.
Reference Books:
1. Modern Control Systems, 10th edition, 2005 (ISBN: 0-13-127765-0), R.C. Dorf & R.H. Bishop,
Prentice Hall.
2. Modern Control Engineering, 4th edition, 2002 (ISBN: 0130609072), K. Ogata, Prentice Hall.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
220
3.
Automatic Control Systems, 8th edition, 2003 (ISBN: 0471134767), B. C. Kuo, John Wiley & Sons.
Course Contents:
Experiment No. 1: Objectives: To learn to use MATLAB to: (1) generate polynomial, (2) manipulate
polynomials, (3) generate transfer functions, (4) manipulate transfer functions and (5) perform partialfraction expansion
Experiment No. 2: Objective: To learn to use MATLAB and the Symbolic Math Toolbox to: (1) find
Laplace transforms for time functions, (2) find time functions from Laplace transforms, (3) create LTI
transfer functions from symbolic transfer functions, (4) perform solution of symbolic simultaneous
equations.
Experiment No. 3: Objective: To learn to use MATLAB to: (1) generate an LTI state-space (SS)
representation of a system, (2) convert an LTI SS representation of a system, (3) extract numerator and
denominator from SS representation of system, (iv) Conversion of f-v and f-i of system, (v) Observe step
response of system of an LTI transfer function.
Experiment No. 4: Objectives: To learn to use MATLAB and the Symbolic Math Toolbox to: (1) find a
symbolic transfer function from the state-space representation; (2) find a state-space representation from
the equations of motion.
Experiment No. 5: Objective: To evaluate the effect of pole and zero location upon the time response of
first- and second-order systems.
Experiment No. 6: Objective: Introduction to Simulink: Browse model library, Import and modifying
blocks, Building and running any feedback system (typical), Implementation technique to view system
response in LTI system.
Experiment No. 7: Objective: To evaluate the effect of additional poles and zeros upon the time response
of second-order systems.
Experiment No. 8: Objectives: To verify the equivalency of the basic forms, including cascade, parallel
and feedback forms. To verify the equivalency of the basic moves, including moving blocks past summing
junctions, and moving blocks past pickoff points.
Experiment No. 9: Objectives: To verify the effect of pole location upon stability. To verify the effect
upon stability of loop gain in a negative feedback system.
Experiment No. 10: Objectives: To verify the effect of input waveform, loop gain, and system type upon
steady-state errors.
Experiment No. 11: Objective: To verify the effect of open-loop poles and zeros upon the shape of the
root locus. To verify the root locus as a tool for estimating the effect of open-loop gain upon the transient
response of closed-loop systems.
Experiment No. 12: Objective: To perform a trade-off study for lead compensation. To design a PI
controller and see its effect upon steady-state error.
Experiment No. 13: Objective: To examine the relationships between open-loop frequency response and
stability, open-loop frequency response and closed-loop transient response, and the effect of additional
closed-loop poles and zeros upon the ability to predict closed-loop transient response.
Experiment No. 14: Objective: To design a PID controller using MATLABs SISO Design Tool. To see
the effect of a PI and a PD controller upon the magnitude and phase responses at each step of the design
of a PID controller.
and related laboratory works based on ETE 3609
Text Book:
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
221
Control Systems Engineering, 4th edition, 2004 (ISBN: 0471445770), Norman S. Nise, Wiley
Course Code: ETE 3609
Course Title: Antenna And Propagation
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the antenna and
propagation.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1) Antenna Basics: Radiation fields of elemental dipoles. Antenna patterns and antenna parameters:
beamwidth, directivity, gain, side-lobes, linear polarization, circular polarization, radiation resistance,
2) Antenna Basics: equivalent circuit of receiving antenna, effective length, capture area, Friis
transmission formula. Reciprocity theorem. Radiation by dynamic currents and charges, retarded
potentials, isotropic source. Half-wave dipole, loop antenna.
3) Antenna Arrays : Two-element array, N-element linear array, phased array, uniform spacing and
amplitude, non-uniform amplitude, planar array.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4) Analysis of Different types of Antennas : Biconical antenna, cylindrical dipole, folded dipole,
Monopole antenna, V Antennas, Inverted V Antennas, J-pole antenna, rhombic antenna, helical antenna,
Yagi-Uda arrays,
5) Analysis of Different types of Antennas : log-periodic antenna, slot, micro strip antenna, rectangular
horn Antenna, circular horn antenna, Cassegrain Antenna, parabolic reflectors, lenses.
Group-B (30 Marks)
6) Radio Wave Propagation : Electromagnetic waves, wave front, characteristic impedance of free
space, reflection, refraction and diffraction. Ground waves and sky waves.
7) Radio Wave Propagation : The ionospheric layers, refractive index, virtual height, critical frequency
and angle, maximum usable frequency, skip zone, skip distance, fading.
8) Radio Wave Propagation : VHF line of sight transmission. Tropospheric scattering communications.
Relationship between transmitter power, antenna gains and received signal to noise in a free space radio
link. VHF and microwave point-to-point link.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
222
1.
2.
3.
Reference Books:
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
223
Credit Hour 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the digital signal
processing.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Discrete Time Signals & Systems
Discrete-time signals, Discrete-time systems, Linear Time-Invariant systems and their properties, Linear
constant coefficient difference equations,
2. Time-Domain Representation of discrete signals
Frequency domain representation of discrete time signals and systems, Fourier transform of discrete
sequences, Discrete time processing of continuous signals.
3. z-Transform and Its Applications
Definition of z-transform, Region of Convergence, Properties of z-Transform, Inversion of the zTransform, Analysis of Linear Time-Invariant Systems in the z-Domain.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Structure of Discrete Time Systems
Block diagram representation of constant coefficient difference equations, IIR and FIR systems and their
basic structures, Stability of discrete time systems. Finite word length effect.
5. Discrete-Time Fourier Analysis
Discrete Fourier Transform and its properties, Inverse Discrete Fourier Transform, Linear Convolution
using Discrete Fourier Transform, Fast Fourier Transform, Decimation in time and Decimation in
frequency.
Group-B (30 Marks)
6. Digital Filter Design and Applications
IIR filter design, bilinear z-transform design approach, IIR filter realization, FIR filter design, realization
of FIR filter, application examples.
7. Introduction to Real-Time DSP Implementation
Overview of DSP systems and applications: the TMS320 family, applications. Introduction to digital
signal processor architecture.
8. Software developments:
Software developments: assembly programs, C programs, mixing C and assembly code, software
development tools. Hardware issues: hardware selection, configurations, and hardware tools. System
considerations. Introduction to code composer studio (CCS).
Text Book:
1. J.G. Proakis & D.G. Manolakis, "Introduction To Digital Signal Processing", Maxwell
Macmillan, 1988.
Reference Books:
2. Allen V. Oppenheim & Ranald W. Schafer, "Discrete-Time Signal & Systems", Prentice
Hall.
3. Lonnie C. Ludeman, "Fundamentals of Digital Signal Processing", John Wiley.
Course Code: ETE 4704
Credit Hour 1
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
224
Course Contents:
Laboratory works based on ETE 4705
Course Code: ETE 4705
Course Title: Satellite Communications
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the satellite
communications.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Introduction to Satellite Communications
Brief history and overview of satellite communications, the Regulatory Bodies. Frequency allocations.
Orbital Aspects of Satellite Communications
2. Fundamental orbital Laws, Useful orbits for satellite communications, Perturbations of the orbits.
Orbital effects on the performance of a communications system.
3. The Satellite-Earth Channel
Satellite uplink and downlink analysis, delay, dual polarization. attenuation,
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Depolarization and rain effect of propagation. The environment of space.
5. Satellite Communications Systems
Modulation and multiplexing techniques for satellite link
Group-B (30 Marks)
6. Forward error correction. Communication Payload, transponders, coverage.
7. Multiple access techniques, traffic laws and routing, FDMA, SPADE, TDMA, CDMA, random access.
Subsystems of a communication satellite, earth station.
8. VSAT and Mobile-Satellite Communications
The VSAT satellite system concept, link analysis, the mobile-satellite channel, direct home TV
broadcasting.
Text Book:
1. Dennis Roddy, Satellite communication system, Amazon, International Edition,
2. Timothy Pratt. Communication Satellite system, Amazon, International Edition
Reference Books:
1. Roddy and Colean, Electronic Communication System, McGraw-Hill, 2nd Edition
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
225
Elective I Courses
Course Code: ETE 4707
Course Title: VLSI Design
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the vlsi design.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. A Historical Perspective; Issues in VLSI Design; CMOS Logic (Inverter, Combinational Logic,
NAND, NOR, Compound gates, Multiplexers, Memory --Latches and Registers. Circuit and System
Representations and Examples
2. MOSFET Transistor; MOS Device Design Equations; CMOS Inverter and Bipolar Devices.
Silicon Semiconductor and Basic CMOS Technology; CMOS Process Enhancements; Layout Design
Rules and Latch up.
3. CMOS Logic Gate Design; Basic Physical Design of Simple Logic Gates; CMOS Logic Structures;
Clocking Strategies and I/O Structures
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Circuit Characterization and Performance Estimation (Resistance Estimation, Capacitance Estimation,
Inductance, Switching Characteristics,
5. Power Dissipation, Charge Sharing, and Scaling of MOS Transistors Dimensions) and
Group-B (30 Marks)
6.CMOS Design Methods (Design Strategies, CMOS Chip design options, Design Methods, Design
Capture Tools, Design Verification Tools, Design economics)
7. Need for Testing, Manufacturing Test Principles, Design Strategies for Test, Chip Level and System
Level Test Techniques
8. CMOS Subsystem Design (Data path Operations, Memory elements and Control); A Core RISC Micro
controller Design; Major Logic Blocs Design and A 6-bit Flash A/D Design
Text Book:
1. Neil H.E. Weste and Kamran Eshraghian : Principles of CMOS Design,
Reference Books:
1. Sung-Mo Kang, Yusuf Leblebici
: CMOS Digital Integrated Circuits
Analysis and Design
2. R. Jacob Baker, Harry W .Li, David E.Boyce : CMOS Circuit design, Layout and
Simulation, Modern,.
3. VLSI Design
: Systems on Silicon
4. Linda E.M. Brackendury
: Design of VLSI Systems : A practical
Introduction,
5. Jan M. Rabaey,
: Digital Integrated Circuits:
6. James D. Plummer, Michael D. Deal and Peter B. Griffin : Silicon VLSI Technology
Fundamentals, Practice and Modeling.
Course Code: ETE 4708
Course Title: VLSI Design Sessional
Credit Hour: 1
Contact Hour: 2 per week
Course Contents:
Laboratory works based on ETE 4707
Course Code: ETE 4709
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
226
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the optimal and adaptive
control.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Introduction to optimal control
Performance measure for optimal control problems, the principle of optimality, Concept of dynamic
programming,
2. The Hamilton-Jacobi-Bellman Equation
3. The calculus of variation
Fundamental of a single function,
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Functionals involving several independent functions, constrained minimization of functional.
5. The variational approach to Optimal Control problems
Group-B (30 Marks)
6. Linear regulator problems, Potryagins minimum principle and state inequality constraints, minimum
time and minimum control-effort problems.
7. Estimation techniques, least mean square, maximum likelihood.
8. Adaptive control systems, Model reference approach for controller design. Neuro-Fuzzy adaptive
control Design and analysis of controller using MATLAB and SIMULINK
Text Book:
1.
Reference Books:
i. Introduction to Optimal Control Theory, Sringer, 1982. [O]. B. K. Oksendal
ii. D. E. Kirk, Optimal Control Theory: An Introduction, Prentice-Hall, 1970
Course Code: ETE 4710
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 4709
Course Code: ETE 4711
Course Title: Monolithic Microwave Integrated Circuits
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the monolithic and
microwave integrated circuits.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
Introduction
1.Why MMICS? Processing, MMIC performance, MMIC status, GaAs MMIC reliability, Yield cost,
Future developments, MMIC applications: Military, Commercial and Consumer applications.
2. Network Parameters
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
227
Z,Y and h parameters, Properties of S parameters, Relationship between s-parameters and other
parameters.
3. Noise Parameters
Thermal noise, Shot noise in two-port network, Noise figure and Smith chart, Noise temperature. Noise
figure and noise voltage.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4.Device Modeling
Single-Gate FET, Basic operation, Device performance analysis, Characterization, Equivalent circuits and
parameter extraction, Device modeling, Design considerations and applications, Noise modeling.
Dual-Gate FET, dc characterization and basic device operation, High frequency lumped element
equivalent circuit, Applications of dual gate FETs.
5.Schottky Diodes, basic operation, Lumped element equivalent circuit, Semi-distributed element
equivalent circuit, Applications and layout considerations. Planer Lumped Elements, Planer capacitors,
Planer resistors. Transmission Lines, Microstrip and coplanar lines for MMICs Line discontinuities.
Group-B (30 Marks)
6.MMIC Design Considerations and Amplifier Design, Design consideration for MMICs, Chip size,
Thermal design and wafer thickness, Low-inductance grounds and crossovers, Propagation modes and
other design considerations.
7. Biasing Techniques
Microwave Amplifier Design, Design considerations, Procedure for general design of an amplifier,
Design examples, 2-18 GHz distributed amplifier, 2-6 GHz feedback gain module, Low-Noise amplifier
design, Circuit performance, Combining techniques for power amplifiers. On-Chip Tuning, Tuning
techniques using addition of elements. Air bridge removal technique.
8.MMIC Design, Nonlinear and control circuits mixer circuit design, Linearization, Device models,
Distributed mixer design.
Variable Attenuator and Switch Design.
Nonlinear FET Operation and Selection, Variable Attenuator Design Measurement Versus Simulation.
Text Book:
1.
1.
2.
3.
4.
Reference Books:
Course Contents:
Laboratory works based on ETE 4711
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
228
229
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 4713
Course Code: ETE 4715
Course Title: Research Methodology
Credit Hour: 1
Contact Hour: 1 per week
Objective: The objective of this course is to introduce the fundamental ideas of the research methodology.
Course Contents:
Course Code: ETE 4800
Course Title: Project/Thesis
Credit Hour: 4
Contact Hour: 4 per week
Objective: The objective of this course is to introduce the fundamental ideas of the research methodology
and perform research or practical project on his related field of interest.
Course Contents:
Each student shall be required to undertake a project which is of academic value for a period of 2
semesters (semester 7 and semester 8). The project involves problem solving using engineering theories
and techniques, and the implementation of the project design. The student is expected to design a possible
solution to the problem, taking into account various aspects such as professionalism, economy, costing
and engineering viability.
At the end of the first trimester, the student is to present his/her progress at a seminar. At the end of the
project, it is expected that the student submits a proper written report and to present his/her work at a
seminar.
The Grade will be calculated in the CGPA of the 8th semester of the Final Year.
Marks distribution for projects/thesis and general viva-voce is as follows:
1) Project/Thesis evaluation by Supervisor35%
2) Project/Thesis evaluation by Examiner35%
3) General Viva-Voce30%
Total
100%
Laboratory
Access to the Sessional facilities shall be provided according to the needs and suitability of the projects.
Reference
Reference materials relevant to the individual project to be provided by the project supervisor.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
230
Objective: The objective of this course is to introduce the fundamental ideas of the optical fiber
communications.
Course Contents:
Section A
(Mid-term Exam: 30 Marks)
1. Introduction: Optical fiber communication link, Optical Tran receiver, modulation techniques,
frequencies, optical fiber types and construction.
2. Propagation in optical fiber: single mode and multimode systems. Step index fibers, graded index
fiber. Operating wavelength and permissible bit rates.
3. Material dispersion and pulse dispersion: Time dispersion in bulk media, combined effects of material
dispersion and multi path dispersion. Root mean square pulse width and frequency response comparison
of three of optical fibers. Acceptance angle, an acceptance cone, numerical aperture.
Section- B (Final Exam: 50 Marks)
Group- A (20-Marks)
4. Optical Sources and Light detectors: Introduction to various types of Lasers, Semiconductor Injection
Laser: Structure, theory of operation including rate equations and characteristics. LED: Structure, theory
of operation and characteristics. Device types, their characteristics, Detection principles, Quantum
efficiency, Responsivity, Semiconductor photodiodes with and without internal gain. PIN diodes,
Avalanche photo diode, PIN FET and Integrated receivers and their characteristics
5. Receiver amplifier: Signal to noise ratio, low and high impedance, trans impedance, front end, FET
preamplifiers, integrated optics.
Group-B (30 Marks)
6. Connectors and couplers :Active and passive, different types, applications and characteristics.
Fiber Manufacturing Techniques, Signal Degradation in OF link Losses in optical fibers viz., 1)
Absorption, 2) Rayleigh scattering 3) Wavelength dispersion 4) Radiation dispersion 5) Coupling losses
6) Splices and Connectors
7. Measurements: Power attenuation measurement, dispersion, refractive index profile, numerical
aperture, eye pattern bit rate OTDR measurements.
8. System Design Considerations: System Design Consideration in noise, Noise Penalties, system margin,
performance in terms of probability of errors considering shot noise and other sources of noise.
Application of fiber in computer networks, telephone, Sonet, SDH Tracking, Industrial application: sensor
systems.
Text Book:
1. Optical fiber communication principles and practice- John M Senior.
Reference Books:
1. Optical fiber communication Gred Keiser
2. Fiber optical communication J.D. Agrawal
3. Optical communication system -John Grower
Course Code: ETE 4802
Credit Hour: 1.5
Course Contents:
Laboratory works based on ETE 4801
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
231
Course Contents:
Students will undergo a practical training lasting for a minimum of 1 weeks at an approved private,
government or semi-government agency. The list of participating agencies will be released by the Faculty.
Placement at the respective agency will be initiated by applications by the students. Approval of the
application is at the discretion of the Faculty.
During the training period, students will be given an assignment which has been agreed by the Faculty
and the participating agency. Training may involve, for example, one or more of the following: Feasibility
study, requirement and functional analysis, system analysis and design, testing and implementation,
maintenance and installation, security and recovery, programming and documentation, data collection and
processing, organizational reengineering etc.
Assessment:
1. Lecturers evaluation during industrial visit: 20%
2. Employers evaluation: 20%
3. Student Log Book (by employer): 10%
4. Written Report: 30%
5. Viva: 20%
Upon passing, the student will accumulate three credit hours which will not be counted in the cumulative
grade-point-average. Those who fail will repeat the training.
Course Code: ETE-4821
Course Title: General Viva
Credit Hour: 1
Contact Hour: 1 per week
Course Contents:
General Concepts of all the 8th semester Courses.
Course Code: ETE 4805
Course Title: Advanced Mobile Wireless Communication
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the wireless mobile
communications.
Course Contents:
Analog and Digital Modulation schemes, Digital modulations applied in Mobile Communications, The
principles of Spread Spectrum Systems. The OSI model, X.25 protocol for a packet switching, Signaling
system NO.7. GSM cellular telephony - architecture and system aspects Data Transmission in GSM.
CDMA in mobile communication systems: Introduction, Basic transmitter and receiver schemes in
CDMA system RAKE receiver, Joint Detection of CDMA signals, Basic properties of a CDMA mobile
system.
Description of IS-95 system (CDMA One). Wireless Local Loop (WLL), Satellite Mobile Communication
systems: SATPHONEs.
Wireless Local Area, Networks: types, HYPERLAN, EEEE802.11 WLAN standards, Bluetooth. 3-G
mobile communications system: UMTS, CDMA2000.
Application of Smart Antennas in wireless mobile Telephony.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
232
Text Book:
1. William Stallings - Wireless Communications and Network
Reference Books:
1. Walker, J.: Mobile Information Systems. Artech House, Inc. 1990, Boston
London
2. Mehrotra, A.: GSM System Engineering. Artech House, Inc. 1997, Boston
London
3. Redl, S.M., Weber, M.K., Oliphant, M.W.: An Introduction to GSM. Artech
House, Inc. 1995, Boston London
4. William Stallings - Wireless Communications and Network
5. Goodman, D. (1997). - Wireless Personal Communications Systems
Course Code: ETE 4806
Credit Hour: 1
Embedded system
Definitions, Classification, Processors in the system, Other hardware units, Software embedded into a
system, Software modules and tools for designing an embedded system. Processor and memory
organization: Structural units, features, and Processor selection for an embedded system. Memory
devices, organization, Selection and Memory allocation and Maps. Devices and Buses for devices
networks: I/O devices, Timer and Counting devices serial communication using I2C, CAN and advanced
I/O buses between Networked Multiple devices, Parallel communication using ISA, PCI, PCI X and
Advanced buses. Device drivers and interrupts servicing mechanism, context and the periods for context
switching Deadline and Interrupt latency.
Text Book:
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
233
Course Contents:
Laboratory works based on ETE 4807
Course Code: ETE 4809
Course Title: Advanced Digital Signal Processing
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the advanced digital signal
processing.
Course Contents:
Spectral estimation
Introduction, Energy density spectrum, non parametric and parametric methods of power spectrum
estimation. Applications of digital signal processing: Dual tone multi frequency signal detection, spectral
analysis of random
signals, musical sound processing, digital FM stereo generation, application to speech: channel vocoder,
speech analysis / synthesis system, application to radar, application to image processing introduction to
wavelets.
Adaptive signal processing
Application, equalization, interference suppression, noise cancellation, FIR filters, minimum mean square
error criterion, least mean square algorithm and recursive least square algorithm.
Multirate Digital Signal Processing
Introduction, Basic sampling rate alteration devices, multistage design of decimator and interpolator,
digital and multilevel filters banks, Power symmetric, alias-free multi channel and tree structured filter
banks.
Wavelets
Short time Fourier transform, wavelet transform, discrete time orthogonal wavelets and continuous time
wavelets basis.
Text Book:
1. John G. Proakis
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
234
Reference Books:
1.
2.
3.
4.
5.
6.
Course Contents:
Laboratory works based on ETE 4809
Course Code: ETE- 4811
Course Title: Remote Sensing Technology
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the remote sensing
technology.
Course Contents:
Remote Sensing, History and Scope of Remote Sensing, Electromagnetic Radiation, Photographic
Sensors, Digital Data, Image Interpretation, Land Observation Satellites, Active Microwave and Thermal
Radiation, Image Resolution and Preprocessing, Image Classification and Field Data, Accuracy
Assessment, Hyper-spectual Remote Sensing, Plant Sciences, Earth Sciences, Land Use, and Land Cover,
Global Remote Sensing, Engineering Applications, Urban-Industrial Applications. Remote Sensing
Satellites, different types of Remote Sensing satellites and the services provided. Ground stations for
receiving data from Remote Sensing Satellites.
Text Book:
1. Robert A. Schowengerdt-- Remote Sensing
Reference Books:
1. Floyed M. Henderson, Anthory J Leurs-- Manual of Remote Sensing,
Principles and Applications
2. Arthur Cracknell, Ladson Hayes-- Introduction to Remote Sensing
3. Richard O Duda, etc.-- Pattern Classification
Course Code: ETE- 4812
Credit Hour: 1
Course Contents:
Experiment Based on ETE-4811
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
235
Reference Books:
1.
Course Contents:
Laboratory works based on ETE 4813
Course Code: ETE 4815
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
236
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the advanced power
electronics.
Course Contents:
Review
Power semiconductor diodes, Thyristors, UJTs, Power Transistors BJTs, MOSFETs, SITs, IGBTs,
Choppers and chopper circuit design, Magnetic considerations, Inverters, Inverter circuit design,
Magnetic consideration.
Generic Power Electronic circuits
Resonant converters, its classification, Basic resonant circuit concepts, Zero current switching resonant
converters, Zero voltage switching resonant converters, and resonant dc link Inverters, High frequency
link integral half cycle converters.
Static Switches
Introduction, single phase and three phase AC switches, Three phase reversing switches for bus transfer,
DC switches, Design of static switches.
Power Supplies
Introduction , Linear power supplies overview of switching power supplies , dc-dc converters with
electrical isolation, control of switching-mode dc power supplies, power supply protection , electrical
isolation in the feedback loop, designing to meet the power supply specifications. AC power supplies,
power line distribution, power conditions, UPS.
Practical Converter Design Consideration
Snubber circuits function and types of snubber circuits, diode & transistor snubber, Turn off over voltage,
turn-on snubbers, GTO snubber considerations.
Gate and Base drive circuits
Preliminary design considerations, DC-Coupled Drive circuits, electrically isolated drive circuits, cascade
connected drive circuits, power device protection in drive circuit, circuits layout considerations.
Component temperature control and heat sinks
Control of semiconductor device temperatures, Heat transfer by conduction, Heat sink, Heat transfer by
radiation and convection. Design of magnetic components, magnetic materials and cores, copper
windings, Thermal considerations, analysis of a specific inductor design, inductor design procedures,
Analysis of specific transformer design, eddy currents, transformer leakage, inductance, transformer
design procedure.
Text Book:
1. M.H. Rashid, Power Electronics Circuits, Devices, and applications, PHI,
2nd edition.
Reference Books
1. Mohan, Undeland, Robbins, Power Electronics Converters, Applications
and Design, Willet, 3rd Edition.
2. M.H. Rashid, Power Electronics Circuits, Devices, and applications, PHI,
2nd edition.
3. M.S. jamil Asghar, Power Electronics, PHI EEE
Course Code: ETE 4816
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 4815
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
237
Credit Hour: 3
Contact Hour: 3 per week
Objective: The objective of this course is to introduce the fundamental ideas of the opto-electronics.
Course Contents:
Optical Sources: Laser: Introduction to various types of Lasers, Semiconductor Injection Laser: Structure,
theory of operation including rate equations and characteristics. LED: Structure, theory of operation and
characteristics.
Optical detector
Device types, their characteristics, Detection principles, Quantum efficiency, Responsivity,
Semiconductor photodiodes with and without internal gain. PIN diodes, Avalanche photo diode, PIN
FET and Integrated receivers and their characteristics
Receiver amplifier
Signal to noise ratio, low and high impedance, trans impedance, front end, FET preamplifiers, integrated
optics.
Receiver Performance Considerations
Noise: Thermal, Dark current, Quantum, Digital signaling and Analogue transmission quantum noise.
Receiver noise.
Optical Amplification
Optical Amplifiers: semiconductor laser amplifier and fiber amplifier.
Integrated Optics
Planar waveguides. Some integrated optical devices: beam splitter, directional couplers, switches,
modulators, filters, injection lasers, polarization transformers and frequency translator. Optoelectronics
integration. Optical bistability and digital optics.
Text Book:
1. "Optical fiber Communications: Principles and Practice" - John. M. Senior, Prentice
Hall, 2nd Edition, 1993
Reference Books:
1. "fiber Optics: Communications and Other Applications" - Henry Zanger and Cynthia
Zanger, Booknews Inc., 1990
Course Code: ETE 4718
Credit Hour: 1
Course Contents:
Laboratory works based on ETE 4717
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
238
:Computer Networks
: Data Communication & Networking
:MCSE Networking Essentials Study Guide
:Mastering Network Security
:Mastering Local Area Networks
:Networking
:Network Fundamental
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
239
Credit Hours: 1
1. Cable Configuration,
2. Network Hardware
3. Network Software,
4. LAN Setup
5. WAN Technologies,
6. Workgroup Setup
7. Client Server Setup,
8. Administrators job
9. Create Active Directories ,
10. Router Configuration
11. Protecting Network Environment: security, Virus, Power supply etc.
12. Network Troubleshooting,
13. Planning a Network for Organization
14.To perform also other experiments relevant to this course.
Electronic and Telecommunication Engineering (ETE) | Error! AutoText entry not defined.
240