Beruflich Dokumente
Kultur Dokumente
1.2 Use of the preparation: For use with ProJet 1200 system
1.3 Company/undertaking identification:
3D Systems, Inc.
333 Three D Systems Circle
Rock Hill, South Carolina
U.S.A.
Phone: 803.326.3900 or
Toll-free Phone:
800.793.3669
e-mail:
moreinfo@3dsystems.com
Chemical Emergency:
800.424.9300 Chemtrec
3D Systems / Australia
5 Lynch Street
Hawthorn, VIC 3122
+1 03 9819-4422
e-mail:
moreinfo@3dsystems.com
Chemical Emergency:
+(61) 29037.2994 Aus
Chemtrec
2. HAZARDS IDENTIFICATION
2.1 Classification:
GHS : Regulation (EC) No. 1272/2008, HazCom 2012, Australian Dangerous Goods Code:
Eye irritation
Category 2
H319
Skin irritation
Category 2
H315
Skin Sensitization
Category 1
H317
GHS07
Signal word: Warning
Hazard determining components of labelling: Triethylene glycol diacrylate
Hazard statements:
H319:
Causes serious eye irritation
H315:
Causes skin irritation
H317:
May cause an allergic skin reaction
Precautionary statements:
P280:
Wear protective gloves, protective clothing, eye protection
P302+350:
If on skin, wash with soap and water
P305+351+338:
If in eyes, rinse cautiously with water for several minutes. Remove contact lenses if
present and easy to do. Continue rinsing
P410+403:
Protect from sunlight. Store in a well-ventilated place
P501:
Dispose of contents/container in accordance with local/regional regulations
1
2
NFPA Ratings
0 = Minimal
1 = Slight
2 = Moderate
3 = Serious
4 = Severe
Personal Protection:
Skin, eye protection
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Chemical characterization:
Description: Organic mixture
3.2 Dangerous components:
Classification
Chemical name
CAS-No
EC-No
1680-21-3
216-853-9
40-55
Tricyclodecane dimethanol
diacrylate
42594-17-2
255-901-3
Phenylbis (2,4,6-trimethyl
benzoyl)- phosphine oxide
162881-26-7
423-340-5
Regulation (EC)
1272/2008
Eye Irrit.2, H319,
Skin Irrit. 2, H315
Skin Sens. 1, H317
Regulation 67/548/EEC,
1999/45/EC
15-25
Xi, R38
1.5-2.5
Xi, R43,53
Xi, R36/38, 43
5. FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media: Water mist, dry chemical, carbon dioxide, or appropriate foam.
5.2 Extinguishing media which must not be used for safety reasons: High volume water jet.
5.3 Special exposure hazards arising from the substance or preparation itself, combustion products,
resulting gases: Thermal decomposition products can include CO2, CO, NOx and smoke.
5.4 Special protective equipment for fire-fighters: Wear full protective clothing, including helmet, selfcontained positive-pressure or pressure demand breathing apparatus, protective clothing and facemask.
5.5 Additional information: Move container from area if it can be done without risk. Cool containers with water
spray. Avoid inhalation of material or combustion by-products.
NA
NA
NA
176C
NA
NA
1.1
NA
insoluble
NA
NA
NA
NA
NA
LD50 Oral
NA
> 2000 mg/kg
LD50 Dermal
NA
>2000 mg/kg
Data
Listed
not applicable
not applicable
not applicable
not applicable
not applicable
not applicable
no listed components
Category 4, Class 3, oil
not applicable
not applicable
not applicable
applicable, industrial waste
www.3dsystems.com
800.793.3669 (Toll-free in the US GMT-07:00; N. America, Mon Fri, 6:00 a.m. to 6 p.m.)
803.326.3900 (Outside the U.S. GMT-07:00; N. America, Mon Fri, 6:00 a.m. to 6 p.m.)
+44 144-2282600 (Europe GMT+01:00; Mon Fri, 08:00 a.m. - 17:00 p.m. MEZ
DISCLAIMER OF LIABILITY: The following supersedes any related provision in your companys forms, letters, and agreements
from, by or with 3D Systems Corporation. 3D Systems, Inc. makes no warranty whether expressed or implied, including
warranties of merchantability or of fitness for a particular purpose for this product. No statements or recommendations contained
in the product literature are to be construed as inducements to infringe any relevant patent now or hereafter in existence. Under
no circumstances shall 3D Systems, Inc. be liable for incidental, consequential, or other damages from alleged negligence,
breach of warranty, strict liability or any other theory, arising out of the use or handling of this product. The sole liability of 3D
Systems, Inc. for any claims arising out of the manufacture, use or sale of its products shall be for the buyers purchase price.
The contents of this safety data sheet are subject to change without notice. 3D Systems, Inc. recommends that you periodically
check www.3dsystems.com to make sure you are using the most current safety data sheet.
Copyright 2014 by 3D Systems, Inc. All rights reserved. The 3D logo, ProJet and VisiJet are registered trademarks of
3D Systems, Inc.