Beruflich Dokumente
Kultur Dokumente
6.10
BETEC
BETEC EXPANSIT
Systems
T
Fields of application
EXPANSIT is used as an explosion/
vibration-free explosion agent for de-
leave it in the pack; after you have added the water the chemical reaction will
take place after a few minutes.
The temperatures of the prefabricated
compound units (see Technical Data)
should never exceed +25 C. The expansion pressure is released due to a
chemical reaction; with temperatures
higher than +25 C, blow-outs are possible.
Recommendation:
It is always advisable to make some
test explosions in previously drilled
holes. Start with smaller drill-hole grids.
The efficacy of EXPANSIT depends on
the temperature and of the characteristics of the respective object. Choose a
smaller drill-hole grid if the object
should be highly reinforced. After being
used, the tools must thoroughly be
cleaned with water.
Technical Data
BETEC EXPANSIT
setting time (20 C)
(depending on the temperature)
min
approx. 10-15
if possible use immediately
setting temperature
min. /max. C
(temperature precast element)
+10 / +25
approx. 10
C
l
# 2,5
kg/m
1.650
kg/lfdm
consistence
density
2,1
liquid
kg/dm
diameter of drill-hole = d
mm
2,06
40
a = (8 bis 16) x d
depths of drill-holes = L
total depth = t
L = 0,8 x t
Special indication
Protect the demolition-object from sunlight or rain by means of tilts.
Do not fill glass or steel bottles of any
vessels that become narrower towards
the top.
Never look into drill holes. Always wear
Size of delivery
10 kg plastic-pail
Storage
to be stored in dry, frost-free locations,
in the not yet opened packs;
best before 12 months
6.10 - 07/07
BETEC