Beruflich Dokumente
Kultur Dokumente
REDUCTION FUNCTION
OPERATING
INSTRUCTION
20
iPhone 4S
MAXIMUM DISTANCE
OVERVIEW
As a new product of Cannice, Iblue5 provides more clear talking
experience. It accepts the outside sound by three microphones and shields
80% environmental noise by produce backward signal. You will have a quite
talking in airport, train, plane, metro and noisy shopping mall.
Compared with the former products, the design of Iblue5 is more
humanized and it uses a new pair program. It connects with the last paired
devices automatically after start and keep the connection during charging to
make convenience for your calling. Armed with CSR clip, Iblue5 shows the
unique performance and gives you perfect sound.
TECHNICAL PARAMETERS
Bluetooth version: V2.1+EDR
Bluetooth protocols: A2DP+HFP1.5+HSP1.0
Bluetooth frequency range: 2.4022.480GHz
Transmit power: class2
Operating distance: 10M for general cellPhone and 20M for iPhone
Standby time: 100hours
Talk time: 4hours
Music time: 4hours
Charge time: 1.5hours
Life: 500times
Input: AC 110-240V DC 5V
SCHEMATIC DIAGRAM
VOL+
VOL-
Rnvironmental
noise reduction
Multifunction
Wind noise
reduction
Talking microphone
In order to use iblue5 conveniently, please follow the operation manual closely
BASIC OPERATION
Function
Operation
LED status
Alert tone
Explaination
On
With alert
tone DI
Off
With alert
tone DI
Pair
With alert
tone DU-DU
Stand by
Calling
Continuous
alert tone
Ncept/
Click the multifunwait/keep ction button twice
three-way
calling
End call
Rejected
call
Re-dial
The headset is in
standby status and
the blue indicator
flashes every 8 seconds after end
up the call
Silent
call
mode
With an
alert DU
With an
alert DU
Volume
up
Volume
down
Previous
track
Next
track
Music
Pause
Automatically
connection
As the headset and mobile phone has connected once, push the
multifunction button
for four seconds when
the Bluetooth headset
is off, it will connect with
the phone automatically
Delete
matched
devices
list
Auto
power-off
without connection
Hardware
reset
Low-voltage
indication
Auto
power-off
in lower
voltage
By the original
charger
Charging
USING STEPS
1.Keep the Bluetooth headset off
2.Push the multifunction button for four seconds till the red and blue
indicator keep lighting alternately
3.Start the headset, search the mobile device and pair with it.
4.After connection it can use for calling and listening music.
NOTICE:
1) The default password of the headset is 0000;
2) The blue indicators will flash every 8 seconds;
3) The searching status will take about two minutes. The blue indicator flashes slowly
to save electricity if not paired successfully within two minutes. Push 3 seconds to
turn off the headset and continue search as above.
COMMON PROBLEMS
AND SOLVING METHODS
Frequently asked questions
Reasons
Solving Methods
Notice
No power released
Restart
Program error
Can not
shut off
The headset
can not be
searched
BATTERY INFORMATION
The electricity of the Bluetooth headset is provided by the inner battery. Do
not connect with the charger if not charging or connect the full charged
battery with the charging circuit as it will shorten the battery life. If without
use after full charged the power will release automatically. Do not put the
headset in the place where is too hot or too cold. That will shorten its
capacity and life.
Keep the temperature around the battery between 15 and 25 otherwise too hot or too
cold may affect its performance. Do not throw it to fire to avoid explosion. Please recycle
the invalid batteries correctly.