Beruflich Dokumente
Kultur Dokumente
Note:
Do not base your design decisions solely on the data presented in this report. Use this information
in conjunction with experimental data and practical experience. Field testing is mandatory to
validate your final design. Simulation helps you reduce your time-to-market by reducing but not
eliminating field tests.
Table of Contents
Table of Contents........................................................................................ 2
List of Figures............................................................................................ 2
Description................................................................................................ 3
Assumptions.............................................................................................. 3
Model Information....................................................................................... 3
Study Properties.......................................................................................... 3
Units........................................................................................................ 4
Material Properties....................................................................................... 4
Loads and Restraints.................................................................................... 5
Connector Definitions................................................................................... 6
Contact..................................................................................................... 6
Mesh Information........................................................................................ 6
Sensor Results............................................................................................ 6
Reaction Forces.......................................................................................... 7
Free-Body Forces........................................................................................ 7
Bolt Forces................................................................................................ 7
Pin Forces................................................................................................. 7
Beams...................................................................................................... 7
Study Results............................................................................................. 8
Conclusion.............................................................................................. 10
List of Figures
SOLID PV-Study 1-Stress-Stress1............................................................9
SOLID PV-Study 1-Displacement-Displacement1....................................9
SOLID PV-Study 1-Strain-Strain1..........................................................10
Description
Assumptions
Model Information
Document Name
Configuration
Document Path
Date Modified
SOLID PV
Default
C:\Users\IMAM\Music\laporan
kp imam\LAPORAN KP
AKHIR\MODELING\SOLID
PV.SLDPRT
Wed Mar 18
08:30:30 2015
Study Properties
Study name
Study 1
Analysis type
Static
Mesh Type:
Solid Mesh
Solver type
FFEPlus
Inplane Effect:
Off
Soft Spring:
Off
Inertial Relief:
Off
Thermal Effect:
Input Temperature
298.000000
Units
Kelvin
Off
Friction:
Off
Off
Off
Units
Unit system:
SI
Length/Displacement
mm
Temperature
Kelvin
Angular velocity
rad/s
Stress/Pressure
N/m^2
Material Properties
No.
Body Name
Material
Mass
Volume
SolidBody
1(BossExtrude3)
A 106 Gr B
27.5973 kg
0.003512 m^3
Material name:
A 106 Gr B
Description:
Material Source:
Material Model Type:
Application Data:
Property Name
Value
Units
Value Type
Elastic modulus
2.05e+011
N/m^2
Constant
Poisson's ratio
0.29
NA
Constant
Shear modulus
7.99e+010
N/m^2
Constant
Mass density
7858
kg/m^3
Constant
Tensile strength
4.15e+008
N/m^2
Constant
Yield strength
2.4e+008
N/m^2
Constant
Thermal expansion
coefficient
1.2e-005
/Kelvin
Constant
Thermal conductivity
52
W/(m.K)
Constant
Specific heat
486
J/(kg.K)
Constant
Fixture
Restraint name
Selection set
Description
on 18 Face(s) fixed.
Load
Load name
Selection set
Loading type
Pressure-1 <SOLID
PV>
on 9 Face(s) with
Pressure 350
kgf/cm^2 along
direction normal to
selected face
Sequential Loading
Connector Definitions
Description
Contact
Contact state: Touching faces - Free
Mesh Information
Mesh Type:
Solid Mesh
Mesher Used:
Standard mesh
Automatic Transition:
Off
Smooth Surface:
On
Jacobian Check:
4 Points
Element Size:
14.541 mm
Tolerance:
0.72705 mm
Quality:
High
Number of elements:
11071
Number of nodes:
19250
00:00:04
Computer name:
IMAM-PC
Sensor Results
No data available.
Reaction Forces
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
16.3336
13101.7
17.5475
13101.7
Free-Body Forces
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
1.32714
0.168145
-0.025795
1.338
Free-body Moments
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
N-m
1e-033
Bolt Forces
No data available.
Pin Forces
No data available.
Beams
No data available.
Study Results
Default Results
Name
Type
Min
Location
Max
Location
Stress1
VON: von
Mises Stress
0 N/m^2
(57.15 mm,
Node: 2105
-57.15 mm,
2.36245e+00
8 N/m^2
(-3.55207e006 mm,
Node: 411
40.0408 mm,
0 mm)
-428.864
mm)
Displacement
1
URES:
Resultant
Displacement
0 mm
(-74.27 mm,
Node: 245
1.25949e-014
mm,
0.0455926
mm
(-9.2538e-005
mm,
Node: 15365
-40.0756 mm,
-460 mm)
Strain1
ESTRN:
Equivalent
Strain
-250 mm)
(-59.29 mm,
0.000740428
Element:
2964
-53.5781
mm,
Element:
3429
-496.667
mm)
(0.000150137
mm,
42.7138 mm,
-73.5262
mm)
Conclusion