Sie sind auf Seite 1von 11

RADHA GOVIND

ENGINEERING
COLLEGE MEERUT

Major Project - Vehicle tracking system with


theft- protection

PROJECT COORDINATER MADE BY-

MR.PRAVEEN MALIK MAHIM


BHATT

PROJECT COUNSLER RAJEEV


KUMAR

MR RAMESH KUMAR SHIKER SHETH

SHIVENDRA JAISWAL
B.TECH (E.C) 4TH
YR

Aim – to make the vehicles secure and stop the

Various CRIMES caused by misusing vehicles

OBJECTIVE
Vehicle tracking system with theft protection is designed for police to have all
information of vehicle crossing any traffic signal with control to stop any car anywhere in
the world. The general object of the subject invention is to provide an integrated system
for tracking motor vehicles. To attain this objective the present invention essentially
comprises a tamper-proof, electronic vehicular license plate having all electronic
components integrated therein, roadside and mobile receivers for detecting vehicles and
decoding the RF transmission, and an information system for making the data useful to
law enforcement, industry, and private citizens. There are, of course, additional features
of the invention that will be described hereinafter and which will form the subject matter
of the claims appended hereto.

A vehicle tracking system with theft protection uses a radio-frequency electronic vehicle
license plate in conjunction with roadside receivers and information system architecture.
The system is used to identify and track vehicles, detecting vehicles operating in violation
of the law, and automatically issuing citations. It also has feature that vehicle can be stop
by police anywhere in the world using mobile phone.

The system comprising of

1. RF electronic Registration plate attached to a vehicle, the license plate having


integrated 12 bit code and transmitting components, the electronic transmitting
components capable of transmitting radio-frequency signals containing information about
the license plate and the vehicle status.
2. DTMF based Fuel locking system which also installed in the vehicle, can be used to
lock unlock fuel of vehicle anywhere in the world using mobile phone.
3. A series of spaced roadside RF information receivers for detecting vehicles and
decoding the transmission signals into data. Also it checks compliance with vehicle
registration, insurance etc
BLOCK DIAGRAM
HT12E FM or 433MHz
12 Keypad Encoder Transmitter

RF Licence plate

FM or 433MHZ HT12D
Receiver Decoder

16*2 LCD
Keypad
Display
8051
Microcontroller

RF Information Receiver

Solnoid operated
Mobile as DTMF
Mobile as DTMF
Transmitter fuel lock
Receiver

DTMF Transmitter and DTMF based fuel lock


Circuit Diagram:
RF registration plate:
dfdf

ELe

DTMF fuel lock:


RF information receiver:
Working:

RF Registration plate: In this project an RF circuitry is installed in each and every car
which continuously transmits 12 bit code. The configuration of code is done using data
bit of HT12E D8-D11. If any of pins connected to the 5v through resister, HT12E read it
as 1. In case of pressing switch IC reads 0. For this purpose we have used HT 12E
encoder. HT 12 E is 2^12 encoders are a series of CMOS LSIs for remote control system
applications. They are capable of encoding information which consists of N address bits
and 12_N data bits. Each address/ data input can be set to one of the two logic states. The
programmed addresses/data are transmitted together with the header bits via an RF
transmission medium upon receipt of a trigger signal. The capability to select a TE
trigger on the HT12E or a DATA trigger on the HT12A further enhances the application
Flexibility of the 212 series of encoders. The HT12A additionally provides a 38kHz
carrier for infrared systems.

DTMF Fuel locks: In the car DTMF based fuel lock is installed which can be activated
or deactivated using mobile phone. Mobile work as a DTMF receiver and encoded hybrid
frequency DTMF code tone is decoded by 9170 IC. 8870 Decode DTMF tone and
convert into BCD code, output depending upon which key is pressed at the transmitter
side. The table shows encoded output
COMPONENTS

 Resistance- 17*10k,1M,2*22k,36K,222E
33k, 330E
 CAPACITOR- 10uF,1uF,0.1uF
 TRANSISTOR- BC548
 2 RF ANTENNA
 MICROCONTROLER-8051
 ENCODER-HT12E
 DECODER-HT12D
 TRANSMITTER & RECIEVER 433MHz
 16*2 LCD DISPLAY
 RELAY-1,LED-1,BATTERY-12VOLTS
ROLE OF STUDENTS

COMPONENTS & HARDWARE– SHIVENDRA KUMAR JAISWAL &


RAJEEV KUMAR.

SOFTWARE & FINALISATION- MAHIM BHATT & SIKHAR SETH.

REFERENCES

1. ELECTRONICS LAB. PROJECTS

http://www.electronics-lab.com/projects/index.html

2. ELECTRONICS Design Schematics and circuit diagrams

http://www.electronics-project-design.com/

3. REVITASOFT INFORMATICS Pvt. Ltd.

www.revitasoft.com

Das könnte Ihnen auch gefallen