Beruflich Dokumente
Kultur Dokumente
Files Needed:
zImage
ROM, Kernel, Modem, etc. Guide
Note: For flashing a ROM, Kernel, and Modem to your device, or for "re-stocking"
- Command for flashing complete ROM, Kernel, and Modem
Code:
heimdall flash --repartition --primary-boot boot.bin --cache cache.rfs
--dbdata dbdata.rfs --factoryfs factoryfs.rfs --pit gt-p1000_mr.pit --modem
modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage --verbose
P1000 GSM and I'll re-stock using files from Overcome, and then flash the Overcome kernel
afterwards. You may have to modify parts of the guide for different devices, kernels, ROMs,
Operating Systems, etc.
Windows Driver Preparation
1. Install Samsung's Drivers (SAMSUNG_USB_Driver_for_Mobile_Phones.msi either from
Kies or SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe from GB-Stock-Safe-v5.zip)
Note: You should reboot your computer after installing, even if it doesn't tell you to. Drivers
wouldn't initialize until I rebooted.
2. Connect your Tab to your computer at least once in Normal, Recovery, and Download mode
so that all drivers initialize
3. Reboot your tab to Download mode
4. Run zadig.exe
5. Go to Options > List All Devices
6. Select Samsung USB Composite Device from the dropdown box
7. Click Install Driver (accept any unsigned driver prompts you get)
8. Once Zadig says the drivers are installed successfully, close it
Windows Flashing Preparation
1. Make a folder specifically for Heimdall someplace safe
2. Copy heimdall.exe and libusb-1.0.dll to the Heimdall folder
3. Acquire GB-Stock-Safe-v5.zip, and Overcome_Kernel_v4.0.0.tar
4. Extract the contents of GB-Stock-Safe-v5.zip in a folder somewhere
Note: In the GB-Stock-Safe-v5.zip extracted folder should at least be modem folders, gtp1000_mr.pit, and GB_Stock_Safe_v5.tar
5. Take the modem.bin from the modem of your choosing and throw it in the Heimdall folder
6. Take gt-p1000_mr.pit and throw it in the Heimdall folder
7. Extract the contents of GB_Stock_Safe_v5.tar into the Heimdall folder
Note: You should have 13 files total equaling around 391MB
Windows Flashing (Re-stocking)
1. Reboot your tab into Download mode
2. Connect it to your PC with the same USB port you used to prepare drivers
3. Open Command Prompt
4. cd into the Heimdall folder
5. Type (or copy/paste)
Code:
heimdall flash --repartition --primary-boot boot.bin --cache cache.rfs
--dbdata dbdata.rfs --factoryfs factoryfs.rfs --pit gt-p1000_mr.pit --modem
modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage --verbose