Beruflich Dokumente
Kultur Dokumente
3rd Flr Unit C22 Banawe De Sta Rosa Phase 2 Balibago, Santa Rosa City, Laguna
Mob/Tel : 0933-5996622, 0932-8688548, ( 049) 5308463
lagunastar1@gmail.com , lagunastar2@gmail.com , lagunastar3@gmail.com
www.hanstartools.com , http://soldering102.blogspot.com
LOW COST, WILL GET THE JOB DONE VAT Reg. TIN 007-434-260-000
Important= The Plug of Ionizers of mostly all brands are designed to be 3 prongs. It is because the 1 prong is for groundings- for
protection. If the electrical plug of the clients have only 2-holes, Do not cut-off the 3 prong plug & have it modified to 2 prong
plug. Instead, convert your power outlet into a 3-hole outlet with proper grounding. Consult a qualified electrician to do this job.
Not using the 3 prong plug will make the unit susceptible to damage since it will lose its grounding. I will also make the
warranty void
Max. consumption
72W
Ion balance
Area cover
90cm by 180cm
Ozone
0.005 ppm
Operating temperature
0-50 deg C.
Wind speed
600-1000FPM 30cm
Wind output
70 CFM at low fan speed, 95 CFM at medium fan speed, 120 CFM at high fan
speed
Fan noise
52 to 64 dB @ 60cm
Display
Weight/Size
7.9kg/ 39.0cm*11.4cm*20.6cm
Packing
Important= The Plug of Ionizers of mostly all brands are designed to be 3 prongs. It is because the 1 prong is for groundings- for
protection. If the electrical plug of the clients have only 2-holes, Do not cut-off the 3 prong plug & have it modified to 2 prong
plug. Instead, convert your power outlet into a 3-hole outlet with proper grounding. Consult a qualified electrician to do this job.
Not using the 3 prong plug will make the unit susceptible to damage since it will lose its grounding. I will also make the
warranty void
Hanstar 5800 overhead blower is a member of Hanstar ionizing air blower, which is designed to provide target coverage for electrostatic
problems.
DESCRIPTION:
1.
The overhead ionizing blower produces an air flow that is rich in positive and negative ions. Directing the air flow on an object that has a
static electricity charge will neutralize the charge.
2.
The overhead ionizing blower has 3 small fans to produce air flow. The volume of air flow is controlled by a variable speed control which
provides a wide range of air flow setting. The high voltage AC is applied to a circular arrangement of tungsten steel ion emitter points
which results in an intense alternating electric field at the tips of the emitter points. It is this electric field that creates alternating polarity
ions in the air flow. To assure that the unit is working properly, the high voltage AC is monitored by an ionization indicator lamp.
3.
The overhead ionizing blower features a patented balancing circuit. Also features a patented built-in emitter point clear. Using the point
clear takes only seconds. Cleaning the emitter points on a weekly basis prevents the build-up of airborne debris all electrical ionizers are
prone to. This keeps your blower working in top form for the life of the unit.
4.
The overhead ionizing blower was designed for use with sensitive electronic components, where electrostatic discharge is a problem. The
5800 can also be used where static electricity causes problems such as: attraction of dirt to product, misalignment of small parts due to
electrostatic jumping and undesirable adhesion of plastic films due to electrostatic charge.
5.
Widely used in the field of Data Storage Manufacturing, Electronics Assembly, Semiconductor Manufacturing, Pharmaceutical Plant, & in
Explosives -Product Productions
FEATURES:
1.
2.
3.
4.
5. Proven Anti-static capabilities ( Tested & is currently being used by many Electronics Factories in the China, Taiwan,
Thailand, India,& in the Philippines)
SPECIFICATION:
Operating voltage
Current consumption
Operating temperature
0-50
Air coverage
Air volume
Ion balance
110cm x 120cm
330CFM
0V +/-10V
Passed ESD STM3.1- 2007; IEC 61340-5-1 standard
1100mm x 110mm x 184mm
11.7 Kg
Size
Weight
Temperature: 22
300mm
1.8s
1.3s
600mm
2.5s
2.2s
900mm
5.2s
4.3s
1200mm
8.6s
7.5s
1.7s
2.3s
4.8s
8.3s
Remarks:
1. Distance measured in mm, decay time measured in seconds.
2. Test data from ME 268A charge plate analyzer.
3. Test figures are subject to the variation in the atmospheric conditions.