Beruflich Dokumente
Kultur Dokumente
9. Hold by the 12 diameter and start the thread using the Stock and Die
with the tailstock ensuring that the axis is square to the die - use
cutting compound.
10.When sufficient has been cut to ensure the trueness of the thread,
take it out of the lathe and finish the tread depth to 60 mm in the
metal working vice.
Nut
1. Cut hexagonal material to length, with allowance for facing.
2. Face the ends in the Centre Lathe to 10 mm length overall, ensure
that the bar runs true.
3. Centre drill the end for the drill.
4. Drill at 10.5 diameter.
5. Counter sink each face and chamfer each at 45 degrees.
6. Use Tee tap wrench to cut internal thread. Set up in the lathe with the
live centre in the end of the tap wrench.
Competencies covered
Unit 1.1F.1 Undertake interactive workplace communication.
Element 1.1F.1 Communicate information about tasks, processes, events, or skills.
1.1F
1.1F
1.1F
1.1F
1.1F
1.1F
1.1F
1.1F
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Criteria
An appropriate choice of communication techniques are used.
Multiple operations involving several topics are communicated.
Listening is done without continuous interruptions of the speaker.
Questions are asked to gain extra information
Correct sources of information are identified
Information is selected and sequenced appropriately
Verbal reporting and written reporting done where required
Communication is demonstrated in unfamiliar situations
Element - 1.1F.2 Take part in group discussion to achieve appropriate work outcomes.
1.1F
1.1F
2.1
2.2
1.1F
2.3
3.1
Met
1.1
1.2F
1.2F
1.2F
1.2F
1.2
1.3
1.4
1.5
1.2F 1.6
1.2F 1.7
1.2F 1.8
3.1
1.2F 3.2
1.2F 3.3
1.1
1.3F
1.2
2.1
2.2
1.1
1.4F
1.2
1.4F
1.4F
1.3
1.4
2.1
1.4F
1.4F
2.2
2.3
3.1
1.4F
3.2
1.1
1.2
1.3
2.1
2.5C11
2.2
1.1
1.2
2.1
2.2
2.3
2.4
3.1
3.2
4.1