Beruflich Dokumente
Kultur Dokumente
Section
Effective
Replaces
System One
Pump
Catalog
1301
March 2001
New
System One
2001 PUMP CATALOG
INDEX
Page
Cover page
Index
Pump product line chart
Pump product line general specifications
Pump product listing: Complete pumps
Magnum
Pump improvement program
Frame S
Cut-a-way with bulleted features
Pictures of pump and features
Design data
Pump assembly and parts list, Horizontal 6"
Pump assembly and parts list, Horizontal 8"
Frame S Dimension Sheets:
Bare pump and pump on base w/ and w/o C Frame
Flange dimension sheet, 150 lb. and 300 lb.
Auxiliary pipe connections
Individual Pump Curves:
1750 and 3500 RPM - SCV 1 to SCV 8
1450 and 2900 RPM - SCV 9 to SCV 16
Frame A and LD17
Cut-a-way with bulleted features
L3/D4 Comparison
Pictures of pump and features
Design data
Pump assembly and parts list
Frame A and LD17 Dimension Sheets:
Bare pumps and pump w/bases,
w/ and w/o C frames
Flange dimension sheet, 150/300
Auxiliary pipe connections
Pump Composite Curves:
1750 and 3500 RPM - ACV 1, ACV 2
1450 and 2900 RPM - ACV 30, ACV31
Individual Pump Curves:
1750 and 3500 RPM - ACV3 to ACV29
1450 and 2900 RPM - ACV32 to ACV59
12
3
4
5
1
2
3
4
5
6
7
8
916
1724
12
3
47
89
1011
1213
14
15
1617
4546
1844
4774
Page
Vortex
Cut-a-way with bulleted features Fr A/LD17
Pictures of pump and design data
Pump assembly and parts list, Frame A ANSI
Pump assembly and parts list, LD17
Vortex Dimension Sheets:
Bare pumps and pumps on bases,
w/ and w/o C frames
Flange dimension sheet
Auxiliary pipe connections
Individual Pump Curves:
2x2-8 (50 x 50-200) @ 960, 1180,
1450, 1750 RPM VCV1-VCV4
3x3-10 (75 x 75-250) @ 960, 1180,
1450, 1750 RPM VCV5-VCV8
4x4-12 (100 x 100-300) @ 960, 1180,
1450,1750 RPM VCV9-VCV12
Frame M
Cut-a-way with bulleted features
Pictures of pump and features
Design data
Pump assembly and parts list
Frame M Dimension Sheets:
Bare pumps and pumps on bases,
w/ and w/o C frames
Flange dimension sheet
Auxiliary pipe connections
Individual Pump Curves:
6x8-13 MCV 1 to MCV 3
6x8-15 MCV 4 to MCV 6
8x10-13 MCV 7 to MCV 9
8x10-15 MCV 10 to MCV 12
1
2
3
4
5
6
7
8-11
12-15
16-19
1
2
3
4
5
6
7
810
1113
1416
1719
Page
Magnum
Cut-a-way with bulleted features
Pictures of pump, features, composite curves
and material analysis
Design data
Pump assembly and parts list
Dimension sheet for bare pump
Dimension sheet for pump on base and
piggyback V belt arrangement
Magnum XP Brochure
Magnum Vertical Brochure
Magnum Composite Curves:
1150 and 1750 RPM - MAG1
1150 and 1750 RPM Vortex - MAG9
Individual pump curves:
1150 and 1750 - MAG2 to MAG8
1150 and 1750 Vortex - MAG10,MAG11
14 x 12 and 12 x 10 Magnum XP MAG12 - MAG15
Pump Improvement Program
Cut-a-way of Frame A power end conversion
w/ bulleted features
Pictures of power end conversions and features
LD ratios of competitor pumps and features
Back cover conversions and oil temperature
monitor / features
Dimension sheet for back cover conversions
Labyrinth seals features
Labyrinth seals dimensions
LS Labyrinth Seals features
LS Labyrinth Seals dimensions
GBS Bearing Protector
1
2
3
4
5
6
78
910
1112
19
1318
2021
2225
1
2
3
4
5
6
78
9
10
11
Page
System One Pump Accessories
Baseplates
1
SpiralTrac bushings
2
1
SpiralTrac benefits
3
Throat Bushings selection chart
4
Accessories Oil temperature monitors,
shaft wrench, cooling coil
5
Casing heating jackets
6
Engineering Data
Modular Construction Chart Parts and materials
1
Material specifications and properties
2
Material analysis of castings
3
Pump Tolerances, Bearings, and O Rings
4
Dimensions for mechanical seal installation
5
System one pump Pressure /Temperature limits 150# 6
System one pump Pressure /Temperature limits 300# 7
Metric / English conversion tables
89
NEMA motor dimensions foot mounted
10
NEMA motor dimensions - C face mounted
1112
General Pump Specification
Centrifugal pump specification for
horizontal end suction pumps
1 SpiralTrac
System One
Frame A/LD17
LD17
(& Vortex)
Frame A
(& Vortex)
Frame A HT
(High Torque)
Frame M
Shaft
L3/D4 RATIO
Diameter at Impeller
Diameter at Seal
Diameter Between Bearings
Diameter at Coupling
46 (1.9)
0.75 (19)
1.500 (38)
2 (50)
0.87 (22)
17 (.65)
1 (25)
1.875 (48)
2.45 (62)
1.375 (35)
53 (1.74)
1 (25)
1.875 (48)
2.45 (62)
1.375 (35)
17/53 (.65/1.74)
1.25 (32)
1.875 (48)
2.45 (62)
1.375 (35)
19 (.87)
1.5 (38)
2.625 (67)
3.25 (83)
2.375 (60)
Bearings
Radial
Thrust
Seal Bore (Nose)
Inside Bore
Depth
Gland Bolting
6308
5308
2.38 (60)
3.44 (87)
2.25 (57)
(4) .37-16
on 3.5 BC
(4) M9
on 89 BC
1.1 (.9)
NA
6310
7310 (2)
2.69 (68)
3.00 (76)
2.00 (51)
(4) .5-13
on 4.62 BC
(4) M12
on 117 BC
3.4 (2.6)
4.2 (3.1)
6310
7310 (2)
2.69 (68)
3.75 (95)
2.9 (74)
(4) .5-13
on 4.75 BC
(4) M12
on 121 BC
3.4 (2.6)
4.2 (3.1)
6310
7310 (2)
2.69 (68)
3.75 (95)
2.9 (74)
(4) .5-13
on 4.75 BC
(4) M12
on 121 BC
6314
7314 (2)
Seal Chamber
Power Limits
Vortex
NA
5.6 (4.2)
3.38
4 .12 (105)
2.56 (65)
(4) .62-11
on 4.75 BC
(4) M16
on 146 BC
14 (10)
NA
Frame M
PRODUCT
DESCRIPTION
Frame S
ANSI standard small frame pumps with mid frame strength; 4 sizes to 450 GPM
(102m3/hr) and 320 foot (96m) head, 1x1.5-6, 2 x 3-6, 1x1.5-8, 1.5 x 3-8
Frame A
ANSI standard frame pump, 11 sizes to 1400 GPM (318m3/hr) and 780 foot (234 m) head;
Sizes 1x 2 thru 4 x 6 in, 8", 10" and 13" impeller diameters
Frame A/LD17
Lo Flo/High Head
(year 2001)
Low flow high head pumps mounted on the Frame A/LD17 power ends; 3 sizes,
to 920 foot (276 m) head and 40 GPM (9 m3/hr), 1x1.5-8, 1x2-10, and 1.5x3-13
Vortex
Frame M
Ancillary Systems
Centrifugal
Abrasive and slurry service pump, 8 sizes to 7500 GPM (1700 m3/hr) and 500 ft head (150 m);
3 x 2-13 to 14 x12-22, smaller sizes available in vertical configuration
Vortex
Solids handling recessed impeller pump, 3 sizes to 1700 GPM (385 m3/hr) and
220 ft head (65m); 3 x 3, 4 x 4, 6 x 6 (Magnachrome and Ductile Iron)
Upgrade existing pumps to System One heavy duty design power end with low stiffness
ratio for maximum reliability
Direct Replacement
PEC
Designed to replace the power end of most popular pump models in small and medium
frame sizes-no rework or modification required;
Goulds1 ST, MT, XLT; Duriron2 MIIGRI, MIIGRII, MIIIGRII
Universal PEC
Designed to replace any small, medium or large frame pump power end with
modification required; FR. S, FR. A, FR. M, (1.500" seal dia shaft to 2.625" dia., #5308
bearing sizes to #7314 pr.)
Back Cover
Conversions
Direct replacement for most popular pump backcovers with large bore seal chamber
for improved sealing environment, cylindrical or taper bore available;
Goulds 6", 8" ST and 8", 10" and 13"MT; Durco3 6", 8" MIIGRI and 8", 10", 13" MIIGRII
Ultimate bearing protection, non-wearing, non-contacting seal, replaces rubber lip seals;
Retrofit sizes .87 to 4.50" (25 to 110mm), SS rotary w/ni. plated steel stationary;
LS (Large Special) Sizes , solid or split, 2.50" to 10.00" (65 to 250mm), iron construction
Oil Temperature
Monitor
Installs in oil sump to constantly monitor oil temperature and warn of lube and
bearing failures
System One
Frame S (ANSI ) Pump
Heavy-duty alternate to
standard small frame pumps
2
11
1 Patented lifetime
labyrinth seals (Pat. #
4,572,517) protect
bearings from intrusion
of contaminants without
causing the shaft damage
typical of lip seals.
2 Patented micrometer
adjustment nuts (Pat. #
4,439,096) fine tune
impeller setting for
maximum efficiency.
10
12
13
Mid-frame strength
and reliability in
small-frame space
System One Frame S Pump is the heavy duty
alternative to standard small frame pumps
which can easily become overstressed when
they are operated off the
best efficiency point of
their performance curve.
You can install the System
One Frame S Pump in the
same space, on the same
piping as conventional
small frame pumps. System
One Frame S Pump provides
superior protection against
broken shafts, bearing failures
and seal failures due to vibration
damage, and seal failures due to inadequate
cooling, cleaning or lubricating action. The System One
Frame S Pump offers the most extensive warranty
program of any pump in the industry.
Conventional
Stuffing Box
System One
Shaft
Conventional
Shaft
1 x 1.5-6
Shaft
L3/D4 Ratio
Diameter at Impeller
Diameter at Seal
Diameter Between Bearings
Diameter at Coupling
Bearings
Thrust
Thrust Option
Radial
Bearing Span
Shaft Overhang
Seal Chamber
Seal Bore Diameter (nose)
Inside Bore
Depth
Back Cover/Shaft Clearance
Gland Bolting
Distance to Nearest Obstruction
Open Impeller
Clearance
Eye Area sq. in. (cm 2)
Maximum Diameter Solids
Number of Vanes
Pumps Weights lbs/kg
Pump Only
Casing
Type
Wall Thickness
Maximum Working Pressure
Test pressure
Rotating Element
Wk2 Dry lbs-ft2 (kg-m 2)
Wk2 Wet lbs-ft2 (kg-m 2)
Maximum Speed (oil lube)
Power Limits
HP (KW)/100 RPM 316SS
5308 AHC3
7308 BEGBY (pair)
6308 C3
3.86 (98)
6.15 (156)
2.38 (60)
3.44 (87)
2.21 (56)
.02 Diametral (.5)
4X .375-16UNC on 3.50 Bolt Circle Diameter (10 on 89 B.C.)
2.38 (60)
3.30 (21)
0.3 (8)
4
5.71 (37)
0.5 (13)
5
110 (50)
130 (59)
126 (57)
0.18 (.007)
0.27 (.011)
3500
0.24 (.010)
0.36 (.015)
3500
STIFFNESS
RATIO1
0.38 (.015)
0.57 (.024)
3500
0.43 (.018)
0.66 (.028)
3500
1.1 (0.9)
S
d2
d3
System One
Frame S
In Stuffing Box ( Less Sleeve)(d )
In Stuffing Box ( With Sleeve)(d1)
Between Bearings (d2 )
At Coupling (d 3)
Radial
Thrust
Bearing Span (S)
Shaft Overhang (L)
L3 /D4
112 (50)
Single Volute
SHAFT DRAWING
0.44 (11) Minimum
See Pressure vs.Temperature Limit Chart
Class 150 Flanges-250PSIG, Class 300 Flanges-450PSIG
BEARINGS
1.5 x 3-8
46 (1.9)
.75-10UNC Thread (19)
1.500 (38)
1.98 (50)
0.874 (22)
SHAFT
DIAMETERS
1 x 1.5-8
1 1/2 (38)
N/A
2 (51)
7/8 (22)
6308
5308
3.86 (98)
6.15 (156)
46 (1.9)
1 For
Competitor
A
with Sleeve
1 1/8 (28)
1 3/8 (35)
1 1/2 (38)
7/8 (22)
6207
5306
4.12 (105)
6.12 (155)
143 (4.5)
d1
Competitor
A
Solid Shaft
1 3/8 (35)
N/A
1 1/2 (38)
7/8 (22)
6207
5306
4.12 (105)
6.12 (155)
64 (2.5)
Competitor
B
with Sleeve
7/8 (22)
1 1/8 (28)
1 1/4 (32)
7/8 (22)
6206
5305
4.06 (103)
5.87 (149)
346 (14.3)
Competitor
B
Solid Shaft
1 1/8 (28)
N/A
1 1/4 (32)
7/8 (22)
6206
5305
4.06 (103)
5.87 (149)
127 (4.4)
good vibration resistance, especially at speeds above 1750 RPM, the stiffness ratio should not exceed 60 in the seal area. The higher the ratio, the higher the frequency of
downtimes, especially as related to bearing and seal failures. The pump has less resistance to the common running conditions which cause vibration running off Best Efficiency
Point (BEP), cavitation, motor misalignment, water hammer, worn parts, plugged or unbalanced impellers, poor piping.
Pump Assembly
Frame S, Horizontal 6"
NO.
ITEM
NO.
ITEM
NO.
Casing
38
143
Impeller
46
Key, Coupling
400
Shaft
66
Micrometer Nut
401
11
Back Cover
69
403
Stud, Cartridge
16
Bearing, Radial
73A
Gasket, Casing
404
Locknut, Cartridge
18
Bearing, Thrust
80
Mechanical Seal
405
O-Ring, Cartridge
19
Bearing, Frame
89E
408
22
89F
414
Plug, Magnetic
33
Bearing Cartridge
89B
433
35
Retainer Cover
89C
435
Plug, Casing
ITEM
Pump Assembly
Frame S, Horizontal 8"
NO.
ITEM
NO.
ITEM
Casing
46
Key, Coupling
401
Impeller
66
Micrometer Nut
403
Stud, Cartridge
Shaft
69
404
Locknut, Cartridge
11
Back Cover
Gasket, Casing
405
O-Ring, Cartridge
16
Bearing, Radial
80
Mechanical Seal
408
18
Bearing, Thrust
89E
414
Plug, Magnetic
19
Bearing, Frame
89F
432
Adapter Plate
22
89B
433
33
Bearing Cartridge
89C
435
Plug, Casing
35
Retainer Cover
143
38
400
73A
NO.
ITEM
Frame S
4.00
(102)
13.50
(343)
1.75
(44)
6.50
(165)
.874 (22)
dia.
5.25
(133)
F1
7.25
(184)
E1
3.00* (76)
6.00
(152)
E1
Clearance holes
for 1/2" bolts
3 places
*Optional
Casing
Feet
Discharge
Center Line
Pump
Discharge
Size
Suction
Size
Nom. Max.
Imp. Dia.
1
2
3
4
1 x 1.5 6
2x3 6
1 x 1.5 8
1.5 x 3 8
1 (25)
2 (50)
1 (25)
1.5 (40)
1.5 (40)
3 (75)
1.5 (40)
3 (75)
6 (150)
6 (150)
8 (200)
8 (200)
2E1
F1
5.50 (140)
4.88 (124)
7.50 (190)
4.25 (108)
Wt
kg
105
118
111
121
47
53
50
55
HL
HT
4 x HH
DIA. HOLE
HD
HG
1.25
(32)
HF
HB
HE
HE
HA
Motor
56
143/145
56
143/145
182/184
213/215
254/256
284/286
324/326
284/286
324/326
364/365
HA
HB
HD
36.00 (914)
12.00 (305)
8.25 (210)
N/A
42.00 (1067)
15.00 (381)
48.00 (1219)
54.00 (1372)
18.00 (457)
52.00 (1321)
54.00 (1372)
9.75 (248)
10.50 (267)
12.00 (305)
11.00 (279)
12.00 (305)
13.00 (330)
3.63 (92)
HG
HE
HH
HL
33.50 (851)
N/A
1.15 (29)
1.09 (28)
0.75 (19)
0.25 (6)
0.49 (13)
HF
3.00 (76)
4.50 (114)
39.50 (1003)
N/A
3.50 (89)
6.00 (152)
45.50 (1156)
4.00 (102)
7.50 (191)
49.50 (1257)
0.75 (19)
4.75 (121)
4.50 (114)
51.50 (1308)
N/A
3.63 (92)
N/A
1.53 (39)
0.75 (19)
N/A
51.50 (1308)
1.00 (26)
4.75 (121)
Wt/lb
kg
76
34
88
40
160
72
206
93
200
90
206
93
System One
Frame S
Flange Dimensions
DISCHARGE
SUCTION
150# Flange
1 (25)
4.25 (108)
3.12 (79)
1.5 (38)
5.00 (127)
3.88 (99)
4
.62 (16)
.44 (11)
4
.62 (16)
.56 (14)
1 (25)
4.88 (124)
3.50 (89)
1.5 (38)
6.12 (155)
4.50 (114)
4
.75 (19)
.69 (18)
4
.88 (22)
.81 (21)
Rating
Size
O.D. Min.
B.C.
No.Holes
Hole Dia.
Min.Thickness
2 (50)
6.00 (152)
4.75 (121)
4
.75 (19)
.62 (16)
3 (75)
7.50 (191)
6.00 (152)
4
.75 (19)
.75 (19)
2 (50)
6.50 (165)
5.00 (125)
8
.75 (19)
3 (75)
8.25 (210)
6.62 (168)
8
.88 (22)
.88 (22)
1.12 (28)
300# Flange
IV
Discharge
II
Suction
III
VII
XI
ITEM
NUMBER
* I
II
III
IV
V
* VI
# VII
## X
XI
XI
VI
NPT
SIZE
NUMBER
OF TAPS
0.38-18
0.25-18
0.25-18
0.12-27
0.75-14
0.25-18 & 0.12-27
0.75-14
0.25-18
0.25-18
1
1
1
1
1
2
1
1
2
* Optional
# Left side of pump facing suction end
## Right side of pump facing suction end
CONNECTION
Casing Drain
Discharge Gage
Suction Gage
Seal Chamber Flush
Oil Fill
Seal Chamber Jacket-Inlet & Outlet
Oil Sight Glass
Oil Drain
Magnetic Plug or Cooling Coil *
SCV 1
SCV 2
10
SCV 3
11
SCV 4
12
SCV 5
13
SCV 6
14
SCV 7
15
SCV 8
16
SCV 9
17
SCV 10
18
SCV 11
19
SCV 12
20
SCV 13
21
SCV 14
22
SCV 15
23
SCV 16
24
System One
Frame A Pump (ANSI) (Pat. # 4, 406, 465)
Low maintenance, long life, maximum value
process pump. Dramatically reduces bearing,
sealing device,
6
16
5
2
9
and shaft
failures.
10
11
14
13 15
17
(Optional oil
temperature
monitor shown)
12
Patented micrometer
adjustment nuts (Pat. #
4, 439, 096) fine tune impeller
setting for maximum
efficiency.
2 Patented System One
Labyrinth Seals (Pat. #
4, 572, 517) provide a nonwearing lifetime protection
for radial and thrust bearings.
3 7310 (pr) angular
contact bearings provided
for maximum thrust capacity.
4 Full support rear leg
assures bearing frame
remains upright during pump
disassembly. Full adjustability
aids in alignment.
14
is a registered trademark
of the manufacturer,
EnviroSeal Engineering Products Ltd.,
Waverly, Nova Scotia
System One
LD17 Pump (ANSI) (Pat. # 4, 406, 465)
10
11
13 (Optional oil
temperature
monitor shown)
1 Patented micrometer
adjustment nuts (Pat. #
4, 439, 096) fine tune impeller
setting for maximum
efficiency.
2 Positive locking thrust
bearing retainer cover for
maximum bearing holding
power and minimum axial
movement.
3 Patented System One
Labyrinth Seals (Pat. #
4, 572, 517) provide a nonwearing lifetime protection
for radial and thrust bearings.
4 7310 (pr) angular contact
bearings are standard for
high thrust capability.
12
Higher reliability
over a wider
performance window...
The lowest L3/D4 ratio
in the industry.
Many processes demand operation
off the BEP where higher loads can create
damaging vibration.
HIGH
LOADS
RADIAL LOAD
BEP
FLOW
LOW
LOADS
Standardize parts
and reduce inventory needs
Parts needs are automatically standardized
when you upgrade to the LD Power End.
System One components feature
interchangeable, modular design.
A single bearing housing, shaft, bearings,
seal chamber and mechanical seal will fit
all pumps of the same size that have
been upgraded.
H/Q CURVE
BEP
HEAD
FLOW
L3/D4 Comparison
without sleeve
with sleeve
radial
bearings:
thrust
shaft diameter at seal
1 Goulds is a registered trademark.
System One
Frame S
Goulds1
ST
Durco 2
GI
System One
LD17
Goulds
MT
Durco
GII
System One
Frame M
Goulds
XLT
Durco
GRIII
46 (1.9)
N/A
6308
5308
1.500 (38)
64 (2.5)
143 (4.5)
6207
5306
1.375 (35)
127 (4.4)
346 (14.3)
6206,7
5305,6
1.125 (29)
17 (.65)
N/A
6310
7310(2)
1.875 (48)
62 (2.3)
116 (4.4)
6309
5309
1.750 (45)
37 (1.7)
65 (2.5)
6310
5310
1.875 (48)
19 (.72)
N/A
6314
7314 (2)
2.625 (67)
25 (.94)
61 (2.3)
313
5313
2.50 (64)
23 (.87)
50 (1.8)
314
5314
2.625 (67)
Rotating
Element
Labyrinth
Seal
BEARING HOUSING
Bearing Protectors preserve L10 life
Patented System One Labyrinth Seals (US pat. # 4572517)
are standard on System One Pumps and offer non-wearing,
lifetime protection superior to common lip seals.
GBS Mechanical Face Seals1 are optional to keep bearings
protected in severely moisture laden environments.
Unlike lip seals, they retain
positive pressure, last for
years instead of months,
and will not fret or groove
the shaft.
Flinger filter
Magnetic Plugs
Magnetic plugs are standard construction to protect the
bearings from any metallic particles in the oil.
Flinger Filter
Patented flinger filter (Pat. # 4, 406, 465) in the Frame A
and LD17 pumps, automatically filters the oil as the
pump is running. Oil is trapped by an entrance port
and centrifugally passed through the filter screen.
Magnetic Plugs
WET ENDS
Centerline design
provides balanced
thermal growth
to prevent
mechanical
stresses
Limited fluid
volume of
conventional
stuffing
box
Superior fluid
volume of
SYSTEM ONE
Seal Chamber
STRAIGHT BORE
TAPER BORE
is a registered trademark
of the manufacturer,
EnviroSeal Engineering Products Ltd.,
Waverly, Nova Scotia
MOUNTING
Right or
left side
discharge
available.
Maximum
installation flexibility
System One Pumps allow
maximum flexibility to meet
any application criteria. Vertical
mounting is accomplished by
the simple addition of a motor
adapter. Side discharge is
possible with the addition
of a special foot. SYSTEM ONE
pumps are the only ANSI
pump with these mounting
configuration
options.
A unique feature of
System One Frame A/LD17
Pumps is the self-supporting
power end which provides
ease of maintenance.
The bearing frame foot
supports the entire housing
and shaft assembly in a safe
and stable position for ease
of maintenance.
Inches (mm)
1.5 x 3.0-10
2.0 x 3.0-10
3.0 x 4.0-10
4.0 x 6.0-10
1.5 x 3.0-13
2.0 x 3.0-13
3.0 x 4.0-13
4.0 x 6.0-13
Shaft
L3/D4 Ratio
52 (1.98)
Diameter at Impeller
1.06 (27) 1.00-12 UNF Thread High Torque 1.31 (33) 1.25-12 UNF Thread
Diameter at Seal
1.875 (48)
2.45 (62)
Diameter at Coupling
1.375 (35)
Bearings
SKF 7310 BEGAY (pair)
Thrust
Radial
6310 C3
Bearing Span
6.02 (153)
Shaft Overhang
8.63 (219)
Seal Chamber
Seal Bore Diameter (nose)
Inside Bore
3.75 (95)
Depth
2.88 (73)
3.00 (76)
Open Impeller
.06 (1.5) Total .015 (0.4) Suction Side
Clearance
Eye Area sq. in. (cm2)
10.6 (68)
10.6 (68)
2.8 (18)
7.9 (51)
9.4 (61)
10.6 (68)
26.8 (173)
7.7 (50)
13.5 (87)
14.4 (93)
30.2 (195)
0.5 (13)
0.6 (15)
0.4 (10)
0.4 (10)
0.7 (18)
0.8 (20)
0.8 (20)
0.5 (13)
0.6 (15)
0.7 (18)
1.0 (25)
Number of Vanes
258 (116)
268 (121)
244 (110)
259 (117)
268 (121)
278 (125)
318 (143)
338 (152)
359 (162)
374 (168)
401 (180)
Single Volute
Wall Thickness
Test pressure
Rotating Element
Wk2 Dry lbs-ft2 (kg-m2)
0.53 (.022)
0.52 (.022)
0.68 (.029)
0.79 (.033)
1.04 (.043)
1.04 (.043)
1.08 (.045)
1.50 (.063)
1.80 (.076)
2.14 (.09)
2.48 (.104)
0.80 (.033)
0.78 (.033)
1.02 (.043)
1.19 (.05)
1.56 (.066)
1.56 (.066)
1.62 (.068)
2.25 (.095)
2.70 (.113)
3.21 (.135)
3.72 (.156)
3500
3500
3500
3500
3500
3500
1750
3500
3500
3500
1750
Power Limits
HP (KW)/100 RPM 316SS
3.4 (2.6)
4.2 (3.1)
5.6 (4.2)
Inches (mm)
1.5 x 3.0-10
2.0 x 3.0-10
3.0 x 4.0-10
4.0 x 6.0-10
1.5 x 3.0-13
Shaft
L3/D4 Ratio
17 (.65)
Diameter at Impeller
1.06 (27) 1.00-12 UNF Thread High Torque 1.31 (33) 1.25-12 UNF Thread
Diameter at Seal
1.875 (47.63)
2.45 (62)
Diameter at Coupling
1.375 (34.93)
2.0 x 3.0-13
Bearings
SKF 7310 BEGAY (pair)
Thrust
Radial
6310 C3
Bearing Span
6.02 (153)
Shaft Overhang
5.94 (151)
Seal Chamber
Seal Bore Diameter (nose)
Inside Bore
3.00 (76)
Depth
2.00 (51)
2.19 (56)
Open Impeller
.06 (1.5) Total .015 (0.4) Suction Side
Clearance
Eye Area sq. in. (cm2)
10.6 (68)
10.6 (68)
2.8 (18)
7.9 (51)
9.4 (61)
10.6 (68)
26.8 (173)
7.7 (50)
13.5 (87)
14.4 (93)
30.2 (195)
0.5 (13)
0.6 (15)
0.4 (10)
0.4 (10)
0.7 (18)
0.8 (20)
0.8 (20)
0.5 (13)
0.6 (15)
0.7 (18)
1.0 (25)
Number of Vanes
258 (116)
268 (121)
244 (110)
259 (117)
268 (121)
278 (125)
318 (143)
338 (152)
359 (162)
374 (168)
401 (180)
Single Volute
Wall Thickness
Test pressure
Rotating Element
Wk2 Dry lbs-ft2 (kg-m2)
0.53 (.022)
0.52 (.022)
0.68 (.029)
0.79 (.033)
1.04 (.043)
1.04 (.043)
1.08 (.045)
1.50 (.063)
1.80 (.076)
2.14 (.09)
2.48 (.104)
0.80 (.033)
0.78 (.033)
1.02 (.043)
1.19 (.05)
1.56 (.066)
1.56 (.066)
1.62 (.068)
2.25 (.095)
2.70 (.113)
3.21 (.135)
3.72 (.156)
3500
3500
3500
3500
3500
3500
1750
3500
3500
3500
1750
Power Limits
HP (KW)/100 RPM 316SS
3.4 (2.6)
4.2 (3.1)
5.6 (4.2)
NO.
ITEM
NO.
ITEM
NO.
ITEM
Casing
62
Flinger
89F
Impeller
66
Micrometer Nut
143
Shaft
69
400
11
Back Cover
71
Frame Adapter
401
Foot, casing
16
Bearing, Radial
72
403
Stud, Cartridge
18
Bearing, Thrust
73A
Gasket, Casing
404
Locknut, Cartridge
19
Bearing, Frame
80
405
O-Ring, Cartridge
408
Mechanical Seal
22
89A
33
Bearing Cartridge
89B
413
Bolt, Eye
35
Retainer Cover
89C
414
38
89D
433
46
Key, Coupling
89E
435
10
89D
NO.
ITEM
NO.
ITEM
NO.
ITEM
Casing
62
Flinger
89F
Impeller
66
Micrometer Nut
143
Shaft
69
400
11
Back Cover
71
Frame Adapter
401
Foot, casing
16
Bearing, Radial
72
403
Stud, Cartridge
18
Bearing, Thrust
73A
Gasket, Casing
404
Locknut, Cartridge
19
Bearing, Frame
80
Mechanical Seal
405
O-Ring, Cartridge
22
89A
408
33
Bearing Cartridge
89B
413
Bolt, Eye
35
Retainer Cover
89C
414
38
89D
433
46
Key, Coupling
89E
435
11
Frame A (ANSI)
23.50
(597)
A1
4.00
(100)
2.19
(56)
X
1.374
(35)
12.50
(318)
7.25
(184)
E1
Pump
Size
Discharge
Size
Suction
Size
Nom. Max.
Imp. Dia.
6
7
8
9
10
11
12
13
14
15
16
2x38
3x48
1 x 2 10
1.5 x 3 10
2 x 3 10
3 x 4 10
4 x 6 10
1.5 x 3 13
2 x 3 13
3 x 4 13
4 x 6 13
2 (50)
3 (75)
1 (25)
1.5 (40)
2 (50)
3 (75)
4 (100)
1.5 (40)
2 (50)
3 (75)
4 (100)
3 (75)
4 (100)
2 (50)
3 (75)
3 (75)
4 (100)
6 (150)
3 (75)
3 (75)
4 (100)
6 (150)
8 (200)
8 (200)
10 (250)
10 (250)
10 (250)
10 (250)
10 (250)
13 (330)
13 (330)
13 (330)
13 (330)
9.50 (241)
11.00 (279)
8.50 (216)
8.50 (216)
9.50 (241)
11.00 (279)
13.50 (342)
10.50 (267)
11.50 (292)
12.50 (318)
13.50 (343)
A1
Lbs. (kg)
15.00 (381)
15.75 (400)
15.75 (400)
16.13 (410)
16.38 (416)
17.63 (448)
19.94 (506)
20.50 (521)
20.88 (530)
22.13 (562)
23.07 (586)
258 (117)
268 (121)
244 (111)
259 (117)
268 (121)
278 (126)
318 (144)
338 (153)
359 (162)
374 (169)
401 (182)
2E1
8.25 (210)
9.75 (248)
10.00 (254)
13.00 (330)
4.50
(114)
HT
4x 1.00 (25)
DIA. HOLE
HD
HG
HF
HB
1.25
(32)
HE
HE
HA
Motor
143/145
182/184
213/215
254/256
284/286
324/326
364/365
404/405
444/445
447/449
HA
HB
HD
T/TS
45.00 (1143)
52.00 (1321)
18.00 (457)
58.00 (1473)
24.00 (610)
26.00 (660)
68.00 (1727)
80.00 (2032)
HE
0.63 (16)
12.25 (311)
or
14.00 1 (356)
3.63 (92)
64.00 (1626)
HG
14.00 (356)
14.88 (378)
0.13 (3)
0.38 (10)
0.63 (16)
0.38 (10)
0.34 (9)
N/A
4.00 (102)
2.00 (51)
1.88 (48)
1.96 (50)
N/A
15.88 (403)
12
7.50 (191)
1.88 (48)
4.50 (114)
4.25 (108)
9.50 (241)
HF
Lbs. (kg)
42.50 (1079)
200 (91)
49.50 (1257)
230 (104)
55.50 (1410)
250 (113)
61.50 (1562)
275 (124)
65.50 (1664)
525 (238)
77.50 (1969)
650 (295)
LD17
20.81
(528)
4.00
(100)
2.19
(56)
A1
X
O
1.374
(34.9)
9.81
(249)
E1
7.25
(184)
E1
Pump
Size
Discharge
Size
Suction
Size
Nom. Max.
Imp. Dia.
6
7
8
9
10
11
12
13
14
15
16
2x38
3x48
1 x 2 10
1.5 x 3 10
2 x 3 10
3 x 4 10
4 x 6 10
1.5 x 3 13
2 x 3 13
3 x 4 13
4 x 6 13
2 (50)
3 (75)
1 (25)
1.5 (40)
2 (50)
3 (75)
4 (100)
1.5 (40)
2 (50)
3 (75)
4 (100)
3 (75)
4 (100)
2 (50)
3 (75)
3 (75)
4 (100)
6 (150)
3 (75)
3 (75)
4 (100)
6 (150)
8 (203)
8 (203)
10 (254)
10 (254)
10 (254)
10 (254)
10 (254)
13 (330)
13 (330)
13 (330)
13 (330)
9.50 (241)
11.00 (279)
8.50 (216)
8.50 (216)
9.50 (241)
11.00 (279)
13.50 (343)
10.50 (267)
11.50 (292)
12.50 (318)
13.50 (343)
A1
Lbs. (kg)
15.00 (381)
15.75 (400)
15.75 (400)
16.13 (410)
16.38 (416)
17.63 (448)
19.94 (506)
20.50 (521)
20.88 (530)
22.13 (562)
23.07 (586)
258 (117)
268 (122)
244 (111)
259 (117)
268 (122)
278 (126)
318 (144)
338 (153)
359 (163)
374 (170)
401 (182)
2E1
8.25 (210)
9.75 (248)
10.00 (254)
13.00 (330)
4.50
(114)
HT
4x 1.00 (25)
DIA. HOLE
HD
HG
1.25
(32)
HF
HB
HE
HE
HA
Motor
A
&
LD17
143/145
182/184
213/215
254/256
284/286
324/326
364/365
404/405
444/445
447/449
HA
HB
HD
T/TS
45.00 (1143)
52.00 (1321)
18.00 (457)
58.00 (1473)
24.00 (610)
26.00 (660)
68.00 (1727)
80.00 (2032)
HE
0.63 (16)
12.25 (311)
or
14.001 (356)
0.13 (3)
0.38 (10)
0.63 (16)
0.38 (10)
0.34 (9)
3.63 (92)
64.00 (1626)
HG
14.00 (356)
14.88 (378)
N/A
4.00 (102)
2.00 (51)
1.88 (48)
1.96 (50)
N/A
15.88 (403)
13
7.50 (191)
1.88 (48)
4.50 (114)
4.25 (108)
9.50 (241)
HF
Lbs. (kg)
42.50 (1080)
200 (91)
49.50 (1257)
230 (104)
55.50 (1410)
250 (113)
61.50 (1562)
275 (125)
65.50 (1664)
525 (238)
77.50 (1969)
650 (295)
System One
Frame A & LD17
Flange Dimensions
DISCHARGE
SUCTION
150# Flange
1 (25)
4.25 (108)
3.12 (79)
1.5 (38)
5.00 (127)
3.88 (99)
2 (50)
6.00 (152)
4.75 (121)
4
.62 (16)
.44 (11)
4
.62 (16)
.56 (14)
4
.75 (19)
.62 (16)
1 (25)
4.88 (124)
3.50 (89)
1.5 (38)
6.12 (155)
4.50 (114)
2 (50)
6.50 (165)
5.00 (125)
4
.75 (19)
.69 (18)
4
.88 (22)
.81 (21)
8
.75 (19)
.88 (22)
25
115
85
4
14
16
40
150
110
4
18
18
50
165
125
4
18
20
Rating
Size
O.D. Min.
B.C.
No.Holes
Hole Dia.
Min.Thickness
3 (75)
7.50 (191)
6.00 (152)
4
.75 (19)
.75 (19)
4 (102)
9.00 (228)
7.50 (191)
8
.75 (19)
.94 (24)
6 (152)
11.00 (279)
9.50 (241)
8
.88 (22)
1.00 (25)
4 (102)
10.00 (250)
7.88 (200)
6 (152)
12.50 (318)
10.62 (270)
12
.88 (22)
300# Flange
Rating
Size
O.D. Min.
B.C.
No.Holes
Hole Dia.
Min.Thickness
3 (75)
8.25 (210)
6.62 (168)
8
.88 (22)
1.12 (28)
8
.88 (22)
1.25 (32)
1.44 (37)
16 Bar Flange
14
80
200
160
8
18
22
100
220
180
8
18
22
150
285
240
8
22
24
IV
Discharge
VI
II
III
Suction
XI
ITEM
NUMBER
* I
II
# III
* IV
V
VI
# VII
# X
## XI
VII
NPT
SIZE
NUMBER
OF TAPS
0.50-14
0.25-18
0.25-14
0.25-18
0.75-14
0.25-18
1
1
1
1
1
2
1.00-11.5
0.75-14
0.50-14
1
1
2
* Optional
# Left side of pump facing suction end
## Right side of pump facing suction end
( 4 x 6 -10 & 4 x 6 -13 Casings have discharge tap only )
15
CONNECTION
Casing Drain
Discharge Gage
Suction Gage
Seal Chamber Flush (not available on LD17)
Oil Fill
Seal Chamber Jacket* Inlet & Outlet
(not available on LD17)
Oil Sight Glass
Oil Drain
Magnetic Plug or Cooling Coil*
ACV 1
16
ACV 2
17
ACV 3
18
ACV 4
19
ACV 5
20
ACV 6
21
ACV 7
22
ACV 8
23
ACV 9
24
ACV 10
25
ACV 11
26
ACV 12
27
ACV 13
28
ACV 14
29
ACV 15
30
ACV 16
31
ACV 17
32
ACV 18
33
ACV 19
34
ACV 20
35
ACV 21
36
ACV 22
37
ACV 23
38
ACV 24
39
ACV 25
40
ACV 26
41
ACV 27
42
ACV 28
43
ACV 29
44
ACV 30
45
ACV 31
46
ACV 32
47
ACV 33
48
ACV 34
49
ACV 35
50
ACV 36
51
ACV 37
52
ACV 38
53
ACV 39
54
ACV 40
55
ACV 41
56
ACV 42
57
ACV 43
58
ACV 44
59
ACV 45
60
ACV 46
61
ACV 47
62
ACV 48
63
ACV 49
64
ACV 50
65
ACV 51
66
ACV 52
67
ACV 53
68
ACV 54
69
ACV 55
70
ACV 56
71
ACV 57
72
ACV 58
73
ACV 59
74
FRAME A
System One
Vortex Pump
Provides a solution
to difficult pumping
problems such as:
Sludges and slurries with
large particle solids
Pumped materials with
entrained air
Pumped fluids with
stringy or fibrous
materials
Designed to fit
the standard
Frame A & LD17
System One
Power End and
includes all
the features and
benefits of our
System One Pump
LD17
Provides a solution
to difficult pumping
problems such as sludges
and slurries with large
particle solids, materials
with entrained air, stringy
or fibrous materials.
Designed to fit the
standard System One
andLD17 Power Ends.
Includes all the features
and benefits of our
System One Pump.
LD17 Shaft.1
3 Backcover/Seal Chamber.
Taper bore provided on LD17.
Cylindrical bore with optional
Carbon or SpiralTrac 2 restriction
bushings available for Frame A.
Vortex Casing.
2 SpiralTrac
is a registered trademark
of the manufacturer,
EnviroSeal Engineering Products Ltd.,
Waverly, Nova Scotia
System One
Vortex Pump
NON-CLOGGING
RECESSED IMPELLER
Designed for:
WASTE TREATMENT
FOOD & CHEMICAL
PROCESSING
PULP & PAPER
AGRICULTURE
and other industries
pumping difficult
materials
VERTICAL
VORTEX
PUMP
2.0 x 2.0-08
3.0 x 3.0-10
61 (2.3)
21 (0.8)
64 (2.4)
23 (0.8)
1.06 (27) 1.00-12 UNF Thread
1.875 (47.63)
2.45 (62)
1.375 (34.93)
SKF 7310 BEGAY (pair)
6310 C3
6.02 (153)
9.25 (235)
6.56 (167)
9.11 (231)
6.42 (163)
4.0 x 4.0-12
75 (2.9)
28 (1.06)
9.73 (247)
7.04 (179)
2.0 (51)
4.0 (102)
8
302 (136)
357 (160)
470 (211)
Single Volute
0.44 (11) Minimum
See Pressure vs.Temperature Limit Chart
Class 150 Flanges-250PSIG, Class 300 Flanges-450PSIG
1750
1750
3.4 (2.6)
1750
NO.
ITEM
NO.
ITEM
NO.
ITEM
Casing
46
Key, Coupling
89E
Impeller
62
Flinger
89F
Shaft
66
Micrometer Nut
143
Suction Cover
69
400
11
Back Cover
71
Frame Adapter
401
Foot, casing
16
Bearing, Radial
72
403
Stud, Cartridge
18
Bearing, Thrust
73A
Gasket, Casing
404
Locknut, Cartridge
19
Bearing, Frame
80
405
O-Ring, Cartridge
Mechanical Seal
22
89A
408
33
Bearing Cartridge
89B
413
Bolt, Eye
35
Retainer Cover
89C
414
Plug, Magnetic
38
89D
433
NO.
ITEM
NO.
ITEM
NO.
ITEM
Casing
46
Key, Coupling
89E
Impeller
62
Flinger
89F
Shaft
66
Micrometer Nut
143
Suction Cover
69
400
11
Back Cover
71
Frame Adapter
401
Foot, casing
16
Bearing, Radial
72
403
Stud, Cartridge
18
Bearing, Thrust
73A
Gasket, Casing
404
Locknut, Cartridge
19
Bearing, Frame
80
405
O-Ring, Cartridge
Mechanical Seal
22
89A
408
33
Bearing Cartridge
89B
413
Bolt, Eye
35
Retainer Cover
89C
414
Plug, Magnetic
38
89D
433
Vortex Pump
(ANSI & LD17)
A1
CP
Y
SW
V = 2.19
X
O
U = 1.374
E1
E2
E2
E1
1
2
3
Fr A
CP
LD17
CP
Wt
Fr A
F
LD17
F
A1
2E1
2E2
2 x 2 8 25.62 (651) 22.93 (582) 4 (102) 7.75 (197) 4.37 (111) 8.25 (210) 16 (406) 302 (137) 14.62 (371) 11.93 (303) 11.25 (286) 15.25 (387) 7.5 (191) 7.25 (184)
3 x 3 10 27.18 (690) 24.49 (622) 4.62 (117) 9.5 (241) 5.5 (140) 10 (254) 19.5 (495) 357(162) 15.58 (396) 12.89 (327) 13.75 (349) 19.25 (489) 7.12 (181) 7.25 (184)
4 x 4 12 29.38 (746) 26.69 (678) 5.5 (140) 11.5 (292) 6.5 (165) 10 (254) 21.5 (546) 470 (214) 16.83 (427) 14.14 (359) 16.5 (419) 22 (559) 9.88 (251) 7.25 (184)
SW
1 (25)
1.12 (28)
1.38 (35)
4x 1.00 (25)
DIA. HOLES
HD
HG
1.25
(32)
HF
HB
HE
HE
HA
Motor
Vortex
Frame A
& LD17
143/145
182/184
213/215
254/256
254/256
284/286
324/326
364/365
HA
HB
HD
52.00 (1321)
18.00 (457)
58.00 (1473)
12.25 (311)
or
14.001 (356)
64.00 (1626)
68.00 (1727)
NA
3.63 (92)
HG
HE
0.63 (16)
HF
HL
230 (105)
49.50 (1257)
0.13 (3)
NA
0.38 (10)
0.63 (16)
0.38 (10)
0.34 (9)
N/A
55.50 (1410)
4.00 (102)
2.00 (51)
1.88 (48)
7.50 (191)
61.50 (1562)
65.50 (1664)
Base Wt.
250 (114)
275 (125)
295 (134)
System One
Vortex Frame A & LD17
Flange Dimensions
DISCHARGE
SUCTION
150# Flange
1 (25)
4.25 (108)
3.12 (79)
4
.62 (16)
.44 (11)
1.5 (38)
5.00 (127)
3.88 (99)
4
.62 (16)
.56 (14)
2 (50)
6.00 (152)
4.75 (121)
4
.75 (19)
.62 (16)
Rating
3 (75)
7.50 (191)
6.00 (152)
4
.75 (19)
.75 (19)
4 (102)
9.00 (228)
7.50 (191)
8
.75 (19)
.94 (24)
6 (152)
11.00 (279)
9.50 (241)
8
.88 (22)
1.00 (25)
300# Flange
Size
1 (25)
1.5 (38)
2 (50)
3 (75)
4 (102)
6 (152)
O.D. Min.
B.C.
No.Holes
Hole Dia.
Min.Thickness
4.88 (124)
3.50 (89)
4
.75 (19)
.69 (18)
6.12 (155)
4.50 (114)
4
.88 (22)
.81 (21)
6.50 (165)
5.00 (125)
8
.75 (19)
.88 (22)
8.25 (210)
6.62 (168)
8
.88 (22)
1.12 (28)
10.00 (250)
7.88 (200)
8
.88 (22)
1.25 (32)
12.50 (318)
10.62 (270)
12
.88 (22)
1.44 (37)
100
220
180
8
18
22
150
285
240
8
22
24
Rating
Size
O.D. Min.
B.C.
No.Holes
Hole Dia.
Min.Thickness
16 Bar Flange
25
115
85
4
14
16
40
150
110
4
18
18
50
165
125
4
18
20
80
200
160
8
18
22
IV
VI
II
Discharge
Suction
VII
III
XI
ITEM
NUMBER
*** I
*** II
#* III
* IV
#V
##* VI
*
#* VII
#X
## XI
NPT
SIZE
NUMBER
OF TAPS
0.50-14
0.25-18
0.25-18
0.25-18
0.75-14
0.25-18
1
1
1
1
1
2
1.0-11.5
0.75-14
0.50-14
1
1
2
* Optional
# Left side of pump facing suction end
## Right side facing suction end
CONNECTION
Casing Drain
Discharge Gage
Suction Gage
Seal Chamber Flush (not available on LD17)
Oil Fill
Seal Chamber Jacket Inlet & Outlet
**
(not available on LD17)
Oil Sight Glass
Oil Drain
Magnetic Plug or Cooling Coil*
VCV 1
VCV 2
VCV 3
10
VCV 4
11
VCV 5
12
VCV 6
13
VCV 7
14
VCV 8
15
VCV 9
16
VCV 10
17
VCV 11
18
VCV 12
19
System One
Frame M Process Pump (ANSI B73.1)
Engineered Reliability:
System Ones Frame M incorporates proven
design features that provide maximum
reliability and long life for
the most demanding
applications.
1
3
4
Unparalleled design
matched with the
best warranty in the
industry make the
System One Frame M
the most cost effective
pumping system
available for high-flow
applications.
12
1 Patented micrometer
adjustment nuts (Pat. #
4,439,096) fine tune impeller
setting for maximum efficiency.
2 Solid shaft (no sleeve) with
L3/D4 ratio of 19 is the lowest
for any process pump in this
size range.
3 Non-wearing labyrinth
seals (Pat. # 4,572,517) provide
unparalleled protection of oil
and bearings.
4 Ultra-high capacity angular
contact thrust bearings
(7314 pr.) provide shaft rigidity
and eliminate axial movement
even during off-BEP operation.
11
10
11 Double volute
construction reduces
hydraulic forces within
the casing thus lowering
radial load on the shaft
and bearings.
12 High efficiency wet ends
help reduce energy costs.
1 SpiralTrac
is a registered trademark
of the manufacturer,
EnviroSeal Engineering Products Ltd.,
Waverly, Nova Scotia.
System One
Frame M ANSI Process Pump
Proven design features provide
maximum reliability and long life for
the most demanding applications
ENGINEERED RELIABILITY
Problem:
Load induced bearing failures.
System One Solution:
Solid shaft and oversized bearings
carry high-sustained loads for the life of the pump.
Problem:
Seal failures due to
off BEP operation.
System One Solution:
Large diameter solid
shaft with the lowest
LD ratio in the industry
(19) provides the
stiffness required to
withstand damaging
forces and maintain
seal face alignment.
D
Typical shaft
high L3/D 4 equals
high vibration.
D
System One LD shaft
has the lowest L3/D 4 ratio in the industry.
Problem:
Oil contamination.
System One Solution:
Small amounts of dirt and water
can cause complete bearing failure
in a short period of time.
System One labyrinth seals,
standard on the Frame M Pump,
keep dirt and moisture out,
prolonging oil and bearing life.
Problem:
Damaging vibration caused by motor misalignment.
System One Solution:
C-Frame adapters take the time and guesswork out
of motor alignment.
Instant alignment prevents destructive vibration
and reduces labor costs.
Inches (mm)
6 x 8-13
6 x 8-15
17.98 (.87)
17.22 (.83)
8 x 10-13
8 x 10-15
19.85 (.96)
19.55 (.94)
Shaft
L3/D4 Ratio
Diameter at Impeller
Diameter at Seal
Diameter Between Bearings
Diameter at Coupling
Bearings
Thrust
Thrust Option
Radial
Bearing Span
Shaft Overhang
Seal Chamber
Seal Bore Diameter (nose)
Inside Bore
Depth
Back Cover/Shaft Clearance
Gland Bolting
Distance to Nearest Obstruction
Open Impeller
Clearance
Eye Area sq. in. (cm2)
Maximum Dia. Solids
Number of Vanes
Pumps Weights lbs (kg)Vanes
Pump Only
CasingVanes
Type
Wall Thickness
Maximum Working Pressure
Test pressure
Rotating Element
Wk2 Dry lbs/ft2 (kg-m2)
Wk2 Wet lbs/ft2 (kg-m2)
Maximum Speed (oil lube)
Power Limits
HP (KW)/100 RPM 316SS
1.50-8UN (38)
2.625 (66.7)
3.25 (82.6)
2.375 (60.3)
7314 BEGAY
N/A
6314 C3
10.53 (267)
9.49 (241)
9.35 (237)
9.80 (249)
Standard
3.627 (92)
4.125 (105)
2.56 (65)
.02 (Radial) (.50)
9.75 (248)
Taper
3.627 (92)
4.125 Minimum (105)
3.56 (90)
.75 (Radial) (19)
45 (290)
1.00 (25)
6
.06 Total .015 Suction Side (1.5 total 0.4 Suction Side)
50 (322)
60 (387)
1.13 (29)
1.50 (38)
6
5
63 (406)
1.19 (30)
6
545 (245)
618 (278)
730 (329)
657 (296)
Double Volute
0.75 Minimum (19)
See Pressure vs.Temperature Limit Chart
Class 150 Flanges-250PSIG,Class 300 Flanges-450PSIG
3.68 (.154)
5.19 (.218)
4.9 (.206)
6.91 (.290)
5.75 (.242)
8.11 (.341)
7.65 (.321)
10.8 (.454)
4000 RPM
14.25 (10.65)
Cylindrical Bore
Large seal chamber
volume provides
optimum volume
for seal lubrication
and cooling.
Cast restriction
bushing reduces
fluid exchange
between casing
and seal chamber
and allows
maximum
cooling of fluid.
Other bushing
options are
available including
carbon and SpiralTrac.
Taper Bore
Two industry- tested
seal chamber designs
provide the right
seal environment
for virtually any
process application.
Vortex breakers
alter seal chamber
flow patterns
to move solids out
and away from
the seal.
Large volume
seal chambers
accept standard
sized glands.
Available seal
chamber jackets
provide optimum
cooling or heating
of seal chamber fluid
to maximize seal life.
Pump Assembly
Frame M
NO.
ITEM
NO.
ITEM
NO.
Casing
62
Flinger
143
Impeller
66
Micrometer Nut
400
Shaft
69
403
Stud, Cartridge
11
Back Cover
71
Frame Adapter
404
Locknut, Cartridge
14
73A
Gasket, Casing
405
O-Ring, Cartridge
16
Bearing, Radial
80
MechanicalSeal
408
18
Bearing, Thrust
89B
413
Bolt, Eye
19
Bearing, Frame
89C
414
Plug, Magnetic
22
89D
433
33
Bearing Cartridge
89E
435
Plug, Casing
35
Retainer Cover
89F
38
89G
ITEM
System One
Frame M Pump (ANSI)
33.88
(861)
A1
6.00
(152)
4.00
(102)
2.38
(60)
14.50
(368)
18.75
(476)
.88 (22)
DIA Hole
16.00
(406)
9.00
(229)
6 x 8 13
8 x 10 13
6 x 8 15
8 x 10 15
Inches (mm)
Discharge
Size
Suction
Size
Nom. Max.
Imp. Dia.
A1
WT. lb
kg
6 (150)
8 (200)
6 (150)
8 (200)
8 (200)
10 (250)
8 (200)
10 (250)
13 (330)
13 (330)
15 (381)
15 (381)
16.00 (406)
18.00 (457)
18.00 (457)
19.00 (483)
25.50 (648)
27.25 (692)
27.25 (692)
28.75 (730)
14.00 (356)
15.25 (387)
14.75 (375)
15.75 (400)
545
657
618
730
245
296
278
328
6.50
(165)
HT
4.75
(121)
4 x1.00 (25)
DIA. Hole
1.25
(32)
9.50
(241)
HF
HB
Motor
284/286
324/326
364/365
404/405
444/445
447/449
HA
HA
9.50
(241)
Inches (mm)
HB
T/TS
68.00 (1727)
24.00 (610)
80.00 (2032)
26.00 (660)
19.25
(489)
5.25 (133)
98.00 (2489)
HF
Wt/lb
kg
1.28 (33)
0.88 (22)
0.25 (6)
1.28 (33)
65.50 (1664)
520
236
600
272
730
331
0.25 (6)
95.50 (2426)
890
404
77.50 (1969)
System One
Frame M
Flange Dimensions
DISCHARGE
SUCTION
Inches (mm)
6 (152)
11.00 (279)
9.50 (241)
8 (203)
13.50 (343)
11.75 (299)
10 (254)
16.00 (406)
14.25 (362)
6 (152)
12.50 (318)
10.62 (270)
8
.88 (22)
1.00 (25)
8
0.88 (22)
1.12 (28)
12
1.00 (25)
1.19 (30)
12
0.88 (22)
1.44 (36)
8 (203)
15.00 (381)
13.00 (330)
12
1.00 (25)
1.62 (41)
10 (254)
17.50 (445)
15.25 (387)
16
1.12 (28)
1.88 (48)
Discharge
VI
IV
Suction
II
III
XI
ITEM
NUMBER
I
II
* III
IV
V
* VI
# VII
# X
## XI
VII
NPT
SIZE
NUMBER
OF TAPS
0.50-14
0.25-18
0.25-18
0.50-14
0.75-14
0.50-14
1.00-11.5
0.50-14
0.50-14
1
1
1
2
1
2
1
1
2
*Optional
# Left side of pump facing suction end
## Right side of pump facing suction end
CONNECTION
Casing Drain
Discharge Gage
Suction Gage
Seal Chamber Flush
Oil Fill
Seal Chamber Jacket inlet & outlet
Oil Sight Glass
Oil Drain
Plug or (cooling coil*)
MCV 1
MCV 2
MCV 3
10
MCV 4
11
MCV 5
12
MCV 6
13
MCV 7
14
MCV 8
15
MCV 9
16
MCV 10
17
MCV 11
18
MCV 12
19
System One
Magnum Pumps
Centrifugal and Vortex
Industrys finest Slurry Pumps featuring:
Solid stainless steel shaft
with L3/D4 ratio of 29 (1:1)
Power End with solid cast base
for maximum rigidity.
4
10
14
13
11
5
15
12
CASING:
POWER END:
BACK COVER:
IMPELLER:
of the manufacturer,
EnviroSeal Engineering Products Ltd.,
Waverly, Nova Scotia
System One
Magnum Pumps
Centrifugal and Vortex
100
500
700
180
140
120
30
100
25
80
20
60
40
15
10
160
20
0
0
100
400
Capacity m3/hr
300
100
500
500
700
700
2
3
40
100
30
50
1
0
400
800
20
3
1200
10
1600
2000
2400
500
400
Limit operation
in gray areas to1.2
specific gravity fluids
150
100
300
2
200
3
2
100
50
5
6
Material Analysis
H 30
Hard Cast Iron
ASTM-A-126
Class C
Carbon
Manganese
Silicon
Nickel
Chromium
Molybdenum
Copper
Phosphorous
Sulfur
Brinnel
Ductile
Iron
ASTM-A-536
65-45-12
.75-0.9
1.35-1.50
1.5
0.4
0.5
250
150-190
Magnachrome
316SS
ASTM-A-532
Class 3
2.0-3.3
2.0 Max
2.5 Max
23.0-30.0
1.2 Max
1.2 Max
0.1 Max
0.6 Max
ASTM
CF8M
0.08
1.5
2
9.0-12.0
18-21
2.0-3.0
500
1000
1500
2000
0.04 Max
0.04 Max
Bal.Iron
156-170
50
600
Total Discharge Head Feet
150
200
200
Total Discharge Head Feet
1000
1500
2000
Capacity Gallons per Minute
250
500
Inches (mm)
Shaft
29 (1.1)
70 (2.7)
1.5-6 UNC 2A (38)
2.500 (63.5)
2.000 (50)
10.69 (272)
2.559 (65)
7.42 (188)
1.87 (47.5)
System One
Magnum Pump Assembly
NO.
ITEM
Casing
NO.
ITEM
NO.
ITEM
Shaft
12B
1A
Casing Gasket
7A
Sleeve
12C
1B
7B
Coupling Key
13
1C
Casing Stud
7C
13A
Impeller
Frame
13B
Impeller Seal
10
13C
2A
3
10A
13D
Gland Set
10B
13E
Mechanical Seal
10C
14
Thrust Bearing
5A
Packing Set
10D
14A
Bearing Lockwasher
5B
Lantern Ring
10E
14B
Bearing Locknut
11
Radial Bearing
22
6B
12
23
Oiler Assembly
Shaft
25
Breather
12A
System One
Magnum
Centrifugal
Pump
CP
Z
Y
Flush 0.25 NPT
Keyway
3.25 x 0.25 x 0.50
(83 x 6 x 13)
1.87 Dia.
(47.5)
9.12
(232)
DD
11.25
(286)
4 Holes
0.687 Dia.
(17.5)
17.75
(451)
Inch (mm)
Pump
Size
CP
DD
Wt.
Lbs.(kg)
3 x 2 13
4 x 3 13
5 x 4 14
6 x 5 11
6 x 5 14
8 x 6 11
8 x 6 14
10 x 8 14
17.87 (454)
17.87 (454)
19.00 (483)
17.87 (454)
21.00 (533)
20.00 (508)
23.56 (598)
22.37 (568)
10.43 (265)
11.06 (281)
12.43 (316)
13.75 (349)
13.75 (349)
14.93 (379)
14.93 (379)
15.37 (390)
10.25 (260)
10.25 (260)
11.00 (279)
11.00 (279)
11.00 (279)
14.00 (356)
14.00 (356)
14.18 (360)
3.75 (95)
4.25 (108)
5.00 (127)
5.75 (146)
5.75 (146)
6.25 (159)
6.25 (159)
6.68 (170)
7.00 (178)
6.75 (172)
6.12 (155)
6.00 (152)
6.00 (152)
8.37 (213)
8.37 (213)
8.00 (203)
28.81 (732)
29.43 (748)
30.81(783)
32.12 (816)
32.12 (816)
33.31 (846)
33.31 (846)
33.75 (857)
8.93 (227)
8.93 (227)
9.50 (241)
8.93 (227)
10.50 (267)
10.00 (254)
11.81 (300)
11.18 (284)
475 (214)
491 (221)
520 (234)
550 (248)
609 (274)
659 (297)
701 (315)
705 (317)
CP
DD
Wt.
Lbs. (kg)
Vortex Pump
Inch (mm)
Pump
Size
1
2
3
6.56
(167)
15.25
(387)
Centrifugal Pump
1
2
31
41
5
61
7
8
6.56
(167)
4
(102)
3 x 3 14
4 x 4 14
6 x 6 14
19.00 (483)
20.00 (508)
22.00 (559)
15.62 (397)
16.69 (424)
19.19 (487)
11.00 (279)
11.87 (302)
13.87 (352)
6.25 (159)
6.43 (163)
7.56 (192)
7.25 (184)
7.25 (184)
7.25 (184)
34.00 (864)
35.00 (889)
37.50 (952)
9.50 (241)
10.00 (254)
11.00 (279)
505 (227)
566 (255)
618 (278)
2
3
4
5
6
8
10
Size
O.D.
B.C.
Thickness
#
Holes
Hole
Size
(51)
(76)
(102)
(127)
(152)
(203)
(254)
6.00 (152)
7.50 (191)
9.00 (229)
10.00 (254)
11.00 (279)
13.50 (343)
16.00 (406)
4.75 (121)
6.00 (152)
7.50 (191)
8.50 (216)
9.50 (241)
11.75 (299)
14.25 (362)
0.62 (16)
0.75 (19)
0.93 (24)
0.93 (24)
1.00 (25)
1.12 (28)
1.18 (30)
4.00
4.00
8.00
8.00
8.00
8.00
12.00
0.75 (19)
0.75 (19)
0.75 (19)
0.87 (22)
0.87 (22)
0.87 (22)
1.00 (25)
Materials:
Centrifugal: Magnachrome ASTM-A-532-CL3
(Chromium Alloyed Iron) and
H30 Hard Iron ASTM-A-126-CLC.
Also certain sizes in 316SS, consult factory.
Vortex: Magnachrome, Ductile Iron
ASTM-A-536... 65-45-12 and 316SS
1 Not currently available in Magnachrome
Vortex
Pump
Y
Flush 0.25 NPT
Keyway
3.25 x 0.25 x 0.50
(83 x 6 x 13)
1.87 Dia.
(47.5)
9.12
(232)
.62
(15.7)
4 Holes
0.687 Dia.
(17.5)
DD
11.25
(286)
17.75
(451)
4
(102)
6.56
(167)
15.25
(387)
6.56
(167)
CP
SP
L
HG
.87" Dia. (22)
Holes (8)
HC
HC
HD
HD
HC
HE
LH
HB
HA
Base
CSMFB-5
CSMFB-2
CSMFB-2
CSMFB-3
CSMFB-3
CSMFB-4
C MAX
19.44
28.12
31.12
33.87
38.00
44.25
HA
13.44 (341)
20.38 (518)
20.38 (518)
26.12 (663)
26.12 (663)
31.25 (794)
HB
49.75 (1264)
62.75 (1594)
62.75 (1594)
70.44 (1789)
70.44 (1789)
81.93 (2081)
Inch (mm)
HC
10.50 (267)
13.75 (349)
13.75 (349)
15.62 (397)
15.62 (397)
18.50 (470)
HD
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
HE
12.50 (318)
19.00 (483)
19.00 (483)
25.00 (635)
25.00 (635)
27.37 (695)
HG
13.12 (333)
15.12 (384)
15.12 (384)
17.12 (435)
17.12 (435)
17.12 (435)
WT. LBS.
109
170
170
229
229
257
kg
49
77
77
103
103
116
Inch (mm)
Pump
Size
3 x 2-13
4 x 3-13
5 x 4-14
6 x 5-11
6 x 5-14
8 x 6-14
8 x 6-14
10 x 8-14
X
10.25 (260)
10.25 (260)
11.00 (279)
11.00 (279)
11.00 (279)
14.00 (356)
14.00 (356)
14.18 (360)
Y
3.75 (95)
4.25 (108)
5.00 (127)
5.75 (146)
5.75 (146)
6.25 (159)
6.25 (159)
6.68 (170)
Z
7.00 (178)
6.75 (172)
6.12 (155)
6.00 (152)
6.00 (152)
8.37 (213)
8.37 (213)
8.00 (203)
CP
28.81 (732)
29.43 (748)
30.81 (783)
32.12 (816)
32.12 (816)
33.31 (846)
33.31 (846)
33.75 (857)
LH
4.43 (113)
5.06 (129)
6.43 (163)
7.75 (197)
7.75 (197)
8.93 (227)
8.93 (227)
10.37 (263)
SP
5 (127)
5 (127)
7 (178)
7 (178)
7 (178)
7 (178)
7 (178)
7 (178)
WT.LBS.
475
491
520
550
609
650
701
705
kg
214
221
234
248
274
293
315
317
VORTEX
3 x 3-14
4 x 4-14
6 x 6-14
11.00 (279)
11.87 (302)
13.87 (352)
6.25 (159)
6.43 (163)
7.56 (192)
7.25 (184)
7.25 (184)
7.25 (184)
34.00 (864)
35.00 (889)
37.50 (952)
9.62 (244)
10.69 (272)
13.19 (335)
5 (127)
5 (127)
7 (178)
505
566
618
227
255
278
23
(584)
2
(51)
DISCHARGE
22.8
(579)
12
(305)
17.5
(445)
SUCTION
12
(305)
40
(102)
12
(305)
11
(279)
1
(25)
2
(51)
38 42
(965 1067)
1
(25)
Sizes: 14 x 12 22
12 x 10 23
3 Concentric casing
with flow divider
reduces radial loads and
extends bearing life.
4 Extra heavy duty shaft,
3.500dia. at the seal.
True concentric
casing and open
impeller yields better
wear characteristics,
flatter H/Q curve and
a wider flow range
at the same head.
Available in H30
hard iron (250 Brinnel)
with ion nitrided
surface (600 Brinnel)
for maximum wear
resistance.
Magnum XP
Size: 14 x 12 x 22 Speed: 1000 -1400 RPM
Head in Feet
Head in Meters
capacity m3/hr
NOTE:
Higher speeds and flows are available
but limited to specific gravity, consult factory for details.
Magnum XP
Size: 12 x 10 x 23 Speed: 1000 -1400 RPM
Head in Meters
capacity m3/hr
Head in Feet
Applications:
Sand, slurry, fly
ash, slag, paper,
pulp, waste slurries,
sewage, bottom
ash, quarry slurries.
System One
Magnum Vertical Pumps for
Abrasive and Slurry Services
Centrifugal and Vortex
Engineered for the toughest
applications in all types of demanding
abrasive and corrosive services
Casing walls 50% thicker than
conventional pumps for extended wear.
Concentric casing design eliminates wear,
reduces bearing loads and shaft defection
at off BEP operation.
Tangential discharge to reduce wear.
Greater distance from vane tip to casing to
reduce wear.
Vortex impellers pass any solids that enter inlet.
Versatile design
for diverse applications
Available in
magnachrome,
H30 hard iron
(250 Brinnel )
and 316SS.
Vortex available
in magnachrome,
duct iron and
316SS materials.
Full range of
pumps with flows
to 2500 GPM
(568 m 3/hr) and
head to 550 feet
(165 m ).
MOTOR FRAME
STANDARD
CROSS-SECTION
VD
VS
VY
Motor
Frame
AB
AG
Wt.
lbs. (kg)
213JP
9.06 (230)
20.40 (519)
310 (141)
215JP
9.06 (230)
20.40 (519)
360 (164)
254JP
10.50 (267)
24.80 (630)
380 (173)
256JP
10.50 (267)
24.80 (630)
410 (186)
284JP
13.10 (333)
26.80 (679)
620 (282)
286JP
13.10 (333)
26.80 (679)
640 (291)
324JP
14.30 (363)
29.80 (757)
885 (402)
326JP
14.30 (363)
29.80 (757)
910 (414)
364JP
15.90 (405)
31.80 (808)
1200 (545)
365JP
15.90 (405)
31.80 (808)
1470 (668)
FLANGE Inch/mm
X
CP
Size
O.D.
B.C.
Thickness
#
Holes
Hole
Size
3 x 2 13
25.25 (641) 12.00 (305) 5.50 (140) 10.25 (261) 7.00 (178) 36.00 (914) 800 (364)
(51)
6.00 (152)
4.75 (121)
0.62 (16)
4.00
0.75 (19)
4 x 3 13
(76)
7.50 (191)
6.00 (152)
0.75 (19)
4.00
0.75 (19)
5 x 4 14 1 26.50 (673) 15.25 (387) 7.50 (191) 11.00 (280) 6.12 (155) 38.00 (965) 855 (389)
(102)
9.00 (229)
7.50 (191)
0.93 (24)
8.00
0.75 (19)
6 x 5 111 27.25 (692) 16.50 (419) 8.00 (203) 11.00 (280) 6.00 (152) 39.31 (998) 885 (402)
(127)
10.00 (254)
8.50 (216)
0.93 (24)
8.00
0.87 (22)
6 x 5 14
27.25 (692) 16.50 (419) 8.00 (203) 11.00 (280) 6.00 (152) 39.31 (998) 925 (420)
(152)
11.00 (279)
9.50 (241)
1.00 (25)
8.00
0.87 (22)
8 x 6 14
27.75 (705) 18.00 (457) 9.00 (229) 14.00 (356) 8.38 (213) 40.50 (1029) 990 (450)
(203)
13.50 (343)
11.75 (299)
1.12 (28)
8.00
0.87 (22)
VD
VS
VY
CP
27.75 (705) 14.50 (368) 5.50 (140) 11.00 (280) 7.25 (184) 41.19 (1046) 820 (373)
4 x 4 14
27.94 (710) 15.69 (399) 6.50 (165) 11.87 (302) 7.25 (184) 42.24 (1073) 885 (402)
6 x 6 14
29.06 (738) 18.31 (465) 8.00 (203) 13.87 (353) 7.25 (184) 44.75 (1137) 960 (436)
10
Materials :
Centrifugal: Magnachrome ASTM-A-532-CL3
(Chromium alloyed iron) and H30 Hard Iron ASTM-A-126 -CLC.
Also certain sizes in 316SS, consult factory.
Vortex: Magnachrome and Ductile Iron
ASTM-A-536... 65- 45-12 and 316SS.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
10
11
13
No modification
needed, just bolt up
and run.
Greater window of operation
away from Best Efficiency Point.
Patented micrometer
adjustment nuts (Pat. #
4,439,096) fine tune impeller
setting for maximum
efficiency.
2 Positive locking thrust
bearing retainer cover for
maximum bearing holding
power and minimum axial
movement.
3 Patented System One
Labyrinth Seals (Pat. #
4, 572, 517) provide a nonwearing lifetime protection
for radial and thrust bearings.
(Optional oil
temperature
monitor shown)
12
Angular contact
bearings are standard for
high thrust capability.
5 Full support rear leg
assures bearing frame
remains upright during pump
disassembly. Full adjustability
aids in alignment.
6 Two magnetic plugs are
provided to maintain clean
oil and are removable for
insertion of cooling coil.
10
Goulds1 3196ST
Durco 2 MII G I
Original equipment:
high L3/D 4 equals high vibration.
Goulds
3196XLT
L
System One LD shaft
has the lowest L3/D 4 ratio in the industry.
System One
Frame S
Goulds
ST1
Durco
GI2
System One
Frame A Power
End Conversion
Goulds
MT 1
Durco
GII2
System One
Frame M
Goulds
XLT1
46 (1.9)
N/A
6308
5308
1.500 (38)
64 (2.5)
143 (4.5)
6207
5306
1.375 (35)
127 (4.4)
346 (14.3)
6206,7
5305,6
1.125 (29)
62 (2.3)
116 (4.4)
6309
5309
1.750 (45)
37 (1.7)
65 (2.5)
6310
5310
1.875 (48)
19 (.72)
N/A
6314
7314(2)
2.625 (67)
25 (.94)
61 (2.3)
313
5313
2.50 (64)
Conventional
long, thin, light duty shaft.
L3/D 4 = 64 to 346 (2.5 to14.3)
for small frame pumps.
L3/D 4 = 38 to 116
(1.7 to 4.4) for
Top: Lip seals damage shafts
medium frame
and lose effectiveness rapidly.
pumps.
C-Frame
Motor Adapter
eliminates manual
alignment problems.
Back Cover
Conversions
Bearing Oil
Temperature
Monitors
Available for
popular pump
models...
Significantly
improves
mechanical seal
reliability...
no machining
required
Early warning
helps prevent
bearing failures
and improve
equipment
reliability
Increase in oil temperature
indicates bearing or lube failure
Constant monitoring of lubrication environment
Adapts to any type of oil-lubricated machinery by
Provides up to 20 times
more fluid capacity for better cooling
than conventional stuffing boxes
Large radial clearance improves centrifugal cleaning
Cooler, cleaner fluid ensures maximum seal face
lubrication
Tangential flush provides better seal cleaning
Optional carbon or SpiralTrac1 restriction bushing for
special applications
Optional open tapered version available
6",
8",
6",
8",
8"
10", 13"
8"
10", 13"
Conventional
stuffing box.
System One
Seal Chamber
4
Back Cover
Conversions
SIZES Inch
Type
Goulds ST 1
6"
8"
Goulds MT
8"
10"
13"
Durco MII, Gr.I 2
6"
8"
Durco MII, Gr.II
8"
10"
13"
A1/A2
Box Bor.
Nose/I.D.
B
Bolt
Circle
C
Stud
Size
D
No.
Studs
E
Shaft
Diameter
F
Box
O.D.
G
Cover
Width
H
Nose
Step
I
Neck
Bor
J
Neck
Thk
2.18/3.44
2.18/3.44
3.5
3.5
.37-16
.37-16
4
4
1.375
1.375
4.12
4.12
2.40
2.40
0.14
0.14
1.41
1.41
0.44
0.44
2.69/4.50
2.69/5.25
2.69/5.25
4.88
4.88
4.88
.50-13
.50-13
.50-13
4
4
4
1.750
1.750
1.750
5.37
6.12
6.12
3.55
3.82
3.82
0.18
0.18
0.18
2.81
2.81
2.81
0.75
0.75
0.75
1.91/3.50
1.91/3.50
3.5
3.5
.37-16
.37-16
4
4
1.125
1.125
4.25
4.25
2.27
2.27
0.12
0.12
1.18
1.18
0.44
0.44
2.69/4.50
2.69/5.25
2.69/5.25
4.88
4.88
4.88
.50-13
.50-13
.50-13
4
4
4
1.875
1.875
1.875
5.37
6.12
6.12
3.28
3.38
3.15
0.18
0.18
0.18
2.81
2.81
2.81
0.75
0.75
0.75
G
H
B
C
D
A2
A1
Blackmer
Labyrinth Seal
OUT PERFORMS LIP SEALS
FOR ALL ROTATING EQUIPMENT
NON-WEARING/NON-CONTACTING
WONT DAMAGE SHAFTS
NICKEL PLATED
STATIONARY ELEMENT
HOODED DESIGN
prevents direct penetration
of dripping fluids; allows
for positive alignment of
stationary.
LABYRINTH
Traps liquid and directs it
to the gravity drain.
MOUNTING RING
Ensures secure mounting
without equipment
alterations.
LOW PROFILE
Seal projection from bearing
housing is small to prevent
interference with other
mechanical components.
OIL DRAIN
Helps retain lubrication
in bearing housing.
ROTARY ELEMENT
316 Stainless steel for
corrosion resistance; acts
as slinger when rotating.
GRAVITY DRAIN
Allows liquid to exit
from labyrinth.
Blackmer
Labyrinth Seal
provides greater
protection over
a wider range
The Blackmer Labyrinth Seal excels
where lip seals fall short:
No relative motion between shaft and seal eliminates
expensive grooving.
The higher the shaft speed, the better it works due to
increased centrifugal force.
Non-contacting parts mean virtually unlimited life.
No detrimental effects from misalignment
(certainly within the limits of the bearing).
Temperatures up to 400F (205C)
have no effect on seal life.
Blackmer
Labyrinth
Seal
B
A
(See dimensions
on next page)
Blackmer
Labyrinth Seal Application Guide
Blackmer Labyrinth Seal Inch
Dimension A
Dimension B
Shaft
Diameter
Without
Mounting Ring
0.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.312
3.375
3.500
3.625
3.750
3.875
4.000
4.125
4.250
4.312
4.375
4.500
1.250
1.375
1.500
1.625
1.750
1.875
2.125
2.250
2.375
2.500
2.625
2.875
2.875
3.000
3.250
3.500
3.750
3.750
4.000
4.000
4.125
4.125
4.375
4.375
4.375
4.875
4.875
5.125
5.125
5.375
5.375
5.375
Seal Outside
Diameter
1.500
1.625
1.750
1.875
2.000
2.125
2.375
2.500
2.625
2.750
2.875
3.125
3.125
3.250
3.500
3.750
4.000
4.000
4.250
4.250
4.375
4.375
4.625
4.625
4.625
5.125
5.125
5.375
5.375
5.625
5.625
5.625
1.625
1.750
1.875
2.000
2.125
2.250
2.500
2.625
2.750
2.875
3.000
3.250
3.250
3.375
3.625
3.875
4.125
4.125
4.375
4.375
4.500
4.500
4.750
4.750
4.750
5.250
5.250
5.500
5.500
5.750
5.750
5.750
1.750
1.875
2.000
2.125
2.250
2.375
2.625
2.750
2.875
3.000
3.125
3.375
3.375
3.500
3.750
4.000
4.250
4.250
4.500
4.500
4.625
4.625
4.875
4.875
4.875
5.375
5.375
5.625
5.625
5.875
5.875
5.875
1.875
2.000
2.125
2.250
2.375
2.500
2.750
2.875
3.000
3.125
3.250
3.500
3.500
3.625
3.875
4.125
4.375
4.375
4.625
4.625
4.750
4.750
5.000
5.000
5.000
5.500
5.500
5.750
5.750
6.000
6.000
6.000
1.94
2.06
2.18
2.50
2.50
2.56
2.68
2.94
3.06
3.06
3.18
3.44
3.44
3.56
3.99
4.24
4.49
4.49
4.74
4.74
4.87
4.87
5.12
5.12
5.12
5.62
5.62
5.87
5.87
6.12
6.12
6.12
25 thru 60
9
18
65 thru 110
11.5
22
Housing Bore Diameter
Shaft
Diameter
Without
Mounting Ring
25
30
35
38
40
42
45
50
55
60
65
70
75
80
85
90
95
100
110
35
47
47
52
52
55
60
65
70
75
82
85
100
100
105
110
115
120
130
Seal Outside
Diameter
40
52
52
60
60
64
68
70
80
82
88
100
115
115
47
55
55
62
62
65
72
72
85
85
90
52
56
56
120
130
130
125
130
135
72
80
90
95
62
62
55
65
65
65
65
75
75
83
88
92
98
103
118
118
113
133
133
138
143
Blackmer
Type LS
Labyrinth Seals
Seals out water and other contaminants
that destroy grease and oil lube bearings
Blackmer LS Labyrinth Seals provide lifetime protection
against water and other contaminants that destroy bearings.
Non-contacting rotary and stationary elements create a
restricted flow path.The spinning element creates centrifugal
force which combines with gravity to direct contaminants
into the drain at the bottom of the seal.
Stationary Element
Hooded design prevents dripping fluids
from entering labyrinth.
Rotating Element
Cannot fret or damage the shaft.
Drive o-Rings
Labyrinth
Tortuous path prevents intrusion of
contaminants.
Metal Construction
Non-contacting for lifetime service
without wear.
The Ultimate
Bearing
Protection
Blackmer
Type LS
Labyrinth Seals
Non-Wearing protection
that outperforms lip seals
Replacing a bearing on larger equipment is time
consuming, difficult and expensive. Unfortunately,
common lip seals offer only limited protection.
Even under the best conditions, lip seals will wear
out in a few thousand hours. The larger the shaft,
the faster the failure. Blackmer LS Labyrinth Seals
provide non-wearing protection for virtually
unlimited life. In addition, they will not groove or
fret the shaft like lip seals, saving the cost of shaft
replacement or refurbishing.
Installation
DIA.
BORE MOUNT
B
SPLIT
VERSION
FLANGE
WIDTH
FLANGE MOUNT
HOUSING
BORE DIA.
Technical Data
Temperature Limit: 400F (205C).
Pressure Limit: Not applicable,
Labyrinth design balances
pressure on both sides of the seal.
Stator Material: Cast Iron.
Rotor Material: Cast Iron.
O-Ring Material: Fluorocarbon.
1.56" (39,6) mm
4- .25-20 UNC
(M6 X 1,00)
SCREWS EQL.
SP STRADDLING
CL ON A C BC
Dimensional Data
Labyrinth Seal Assembly Dimensions
A
Inch
6.38
7.38
8.38
9.38
10.38
11.38
12.38
B
mm
163
188
213
239
264
290
315
Inch
7.38
8.38
9.38
10.38
11.38
12.38
13.38
C
mm
188
213
239
264
290
315
340
10
Inch
5.12
6.12
7.12
8.12
9.12
10.12
11.12
D Max.
mm
130,0
155,4
180,8
206,2
231,6
257,0
282,4
Inch
6.00
7.00
8.00
9.00
10.00
11.00
12.00
mm
155
180
205
230
255
280
305
Types Offered:
Standard System One steel channel
P.I.P. specification RESP002
Per Customer specific requirements
Options available:
Drip rim with drain
Boxed ends
Sloped base
Leveling screws
Grout holes - Vent holes
Motor adjusting jacks
Lifting lugs
Materials:
Carbon Steel
304 or 316
Stainless Steel
Galvanized
Steel
System One
SpiralTrac
Seal Chamber Bushings
No Environmental Control
Seal Cavity With SpiralTrac
1 SpiralTrac
System One
SpiralTrac Benefits
1
System One
SpiralTrac Environmental Controller &
Throat Bushing Selection Chart
1
8"
Durco2 MK II GR II
Goulds3 MT BCC
SpiralTrac
Frame S
Durco 2 MK II GR I
Goulds 3 ST BCC
Backcover
Counterbore
SpiralTrac3
CG/PTFE
SpiralTrac
316SS
SpiralTrac
416SS
SealMate3
316SS
SealMate
Hast C22
3.468 x .75
3.468 x .75
4.500 x 1
5.250 x 1
3.468 x .75
1.500 x 3.468
1.375 x 3.468
1.875 x 4.500
1.875 x 5.250
1.875 x 3.468
1.500 x 3.468
1.375 x 3.468
1.875 x 4.500
1.875 x 5.250
1.875 x 3.468
1.500 x 3.468
1.375 x 3.468
1.875 x 4.500
1.875 x 5.250
1.875 x 3.468
1.500 x 3.470
1.375 x 3.470
N/A
N/A
1.875 x 3.470
1.500 x 3.470
1.375 x 3.470
N/A
N/A
1.875 x 3.470
SpiralTrac
Frame A ANSI
Frame A LD17
Mid Frame
Backcover
Counterbore
3.982 x 1
3.468 x .75
4.125 x .87
SpiralTrac
CG/PTFE
1.875 x 3.982
1.875 x 3.468
2.625 x 4.125
SpiralTrac
CG/PTFE
SpiralTrac
316SS
SpiralTrac
416SS
SealMate
316SS
SealMate
Hast C22
Magnum
Magnum Packing
4.25 x .87
None Required
N/A
SpiralTrac CG/PTFE
2.500 x 3.500
Uses 3 rings of packing
1.875 x 3.468
2.625 x 4.125
1.875 x 3.653
2.500 x 4.250
1.875 x 3.982
1.875 x 3.468
2.625 x 4.125
2.500 x 4.250
1.875 x 3.984
1.875 x 3.470
N/A
N/A
1.875 x 3.984
1.875 x 3.470
N/A
N/A
Throat Bushings
Carbon bushings
Counterbore
Bushing
14K Bushings5
Counterbore
14KRB (PTFE)5
14KRB2P (poly)
Throat Bushings
Carbon bushings
Counterbore
Bushing
14K Bushings5
Counterbore
14KRB (PTFE)5
14KRB2P (poly)
Frame S
Durco M II GR I
Goulds ST BCC
Durco M II GR II
Goulds MT BCC
LD 18 Durco SLS
LD 23 Goulds SLS
2.39 x .35
special machining
1.50 x 2.39
consult factory
3.00 x .62
standard
1.87/1.75 x 3.00
consult factory
3.468 x .75
special machining
1.500 x 3.468 x .500
3.468 x .75
special machining
3.00 x .62
standard
consult factory
Frame A ANSI
Frame LD17
Frame M
Magnum
3.25 x .780
standard (incl.)
1.87 x 3.25
3.25 x .780
special machining
1.87 x 3.25
3.627 x .75
special machining
2.63 x 3.62 x .74
4.25 x .87
special machining
2.50 x 4.25
3.25 x .780
standard
1.890 x 3.235 x .56
1.890 x 3.235 x .56
3.25 x .780
special machining
1.890 x 3.235 x .56
1.890 x 3.235 x .56
4.25 x .87
2 Durco
1 SpiralTrac
is a registered trademark
is a registered trademark
5 Product of A. W. Chesterton Company
3Goulds
System One
Pump Accessories
Bearing Oil
Temperature
Monitors
Early warning
helps prevent
bearing failures
and improve
equipment
reliability
Increase in oil temperature
indicates bearing or lube failure
Constant monitoring of lubrication environment
Adapts to any type of oil-lubricated machinery by
To order
Frame S or any 1/4" NPT application No. 685362.
Frame A & M (with 3/4" x 1/4" reducing bushing) No. 685361.
1 Product
Front view showing 3/4" NPT couplings for connection of steam piping.
Jacket is split along vertical axis.
Frame S
Frame SD
Frame A
& LD17
Frame M
Casing
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
Casing Gasket
1/16" per
Application
1.5 mm per
Application
1/16" per
Application
1/16" per
Application
1/16" per
Application
Casing Foot
Steel
Cast
D.I./Centerline
D.I./Centerline
Impeller
CD4MCu
A-20,Hast.
CD4MCu
A-20,Hast.
CD4MCu
A-20,Hast.
D.I.,CD4MCu
A-20,Hast.
D.I.,CD4MCu
A-20,Hast.
Teflon1
Teflon
Teflon
Teflon
Teflon
Suction Cover
N/A
N/A
N/A
D.I.,316SS
CD-4,A-20,Hast.
N/A
Back Cover
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
D.I.,316SS
CD-4,A-20,Hast.
Refer to
Seal Dwg.
Refer to
Seal Dwg.
Refer to
Seal Dwg.
Refer to
Seal Dwg.
Refer to
Seal Dwg.
Shaft bimetallic
(Steel w/alloy wetted end)
316SS
A-20,Hast.
316SS
A-20,Hast.
316SS,A-20
17-4 Ph,Hast.
316SS,A-20
17-4 Ph,Hast.
316SS
A-20,Hast.
Radial Bearing
6308
6308
6310
6310
6314
Thrust Bearing
2
1
5308
7308 (2) (opt.)
7308(2)
7310 (2)
7310 (2)
7314 (2)
Steel N08
Steel KM8
Steel N10
Steel N10
Steel N14
Steel W08
Steel MB8
Steel W10
Steel W10
Steel W14
Flinger
N/A
N/A
Nylon 66
Nylon 66
Alum
1
1
316SS
316SS
316SS
316SS
316SS
D.I.
D.I.
C.I.
C.I.
C.I.
Steel
Steel
Steel
Steel
Steel
Thrust Bearing
Cartridge O-Ring
Buna
Buna
Buna
Buna
Buna
Bearing Frame
C.I.
C.I.
C.I.
C.I.
C.I.
C.I.option
N/A
C.I.
C.I.
C.I.
Steel-Zinc
Plated
Steel-Zinc
Plated
Steel-Zinc
Plated
Steel-Zinc
Plated
Steel-Zinc
Plated
N/A
N/A
D.I./C.I.
Buna
D.I./C.I.
Buna
D.I.
Buna
304SS
304SS
304SS
304SS
304SS
Cartridge Stud
304SS
304SS
304SS
304SS
304SS
Cartridge Locknut
304SS
304SS
304SS
304SS
304SS
Nylon 66
Nylon 66
Nylon 66
Nylon 66
Nylon 66
C.I.
C.I.
C.I.
C.I.
C.I.
Part Name
System One
Material Specifications
& Properties
ASTM No.
Specification No.
TENSILE Strength
Lbs./In2 Min (MPa)
Gray Iron
A48 CL 30
30,000 (207)
Ductile Iron
(casings and backcovers)
60,000 (414)
40,000 (276)
149-187
Ductile Iron
(cartridges, feet & Frame A adapter
65,000 (448)
45,000 (310)
149-187
A536 100-70-03
100,000 (690)
70,000 (483)
217-269
Carbon Steel
A216 WCB
70,000-95,000 (482-655)
36,000 (248)
A743 CF8M
70,000 (483)
30,000 (207)
156-210
CD4MCu S.S.
A743 CD4MCu
100,000 (690)
70,500 (486)
253
Material
Yeild Strength
Lbs./In2 Min (MPa)
Brinnel
Hardness
Cast
210
Alloy 20
A743 CN7M
62,000 (428)
25,000 (172)
130
Hastelloy B
A494 N7M
76,000 (524)
40,000 (276)
175
Hastelloy C
A494 CW12MW
72,000 (496)
40,000 (276)
175
A276
75,000 (517)
30,000 (207)
304 SS
A276
75,000 (517)
30,000 (207)
17-4 pH
135,000 (931)
105,000 (724)
Wrought
Aluminum
6061-T6
45,000 (310)
40,000 (276)
Alloy 20
B473 20CB-3
85,000 (586)
35,000 (241)
Bronze
SAE 660
Carbon Steel
(bar and bases)
58,000 (460)
32,000 (221)
116
Nylon
95
Teflon
Durabar, G2 C.I.
A48 CL40
40,000 (276)
Hastelloy C
C-276
99,000 (683)
38,200 (263)
Rock B-87
Hastelloy B
B2
130,000 (897)
59,000 (407)
Rock B-94
System One
Material Analysis of
Pump Castings
Chemical Composition %
316SS
A743 CF8M
CD4MCu
A743 CD4MCu
Alloy 20
A743 CN7M
Hastelloy B
A494 N7M
Hastelloy C
A494CW12MW
0.12
0.02
1.0
15.5-17.5
Carbon Max.
0.08
0.04
0.07
Mang. Max.
1.50
1.00
1.50
Silicon. Max.
2.00
1.00
1.50
Phos. Max.
0.04
0.04
0.04
Sulfur Max.
0.04
0.04
0.04
Chromium
18.0-21.0
24.5-26.5
19.0-22.0
Nickel
9.0-12.0
4.75-6.00
27.5-30.5
Balance
Balance
Molybdenum
2.0-3.0
1.75-2.25
2.0-3.0
26.0-30.0
16.0-18.0
2.75-3.25
3.0-4.0
Bal.
Bal.
4.0-6.0
4.5-7.5
Copper
Iron
Bal.
Tungsten
3.75-5.25
Vanadium
0.2-0.6
0.2-0.4
Ductile Iron
Magnachrome
316SS
ASTM-A-126 Class C
ASTM-A-536
65-45-12
ASTM-A-532-Class 3
ASTM CFM8M
2.0-3.3
0.08
Manganese
Carbon
.75-0.9
2.0 Max
1.5
Silicon
1.35-1.50
1.5 Max
Nickel
1.5
2.5 Max
9.0-12.0
Chromium
0.4
23.0-30.0
18-21
Molybdenum
0.5
1.2 Max
2.0-3.0
Copper
1.2 Max
Phosphorous
0.1 Max
0.04 Max
Sulfur
0.06
0.04 Max
Bal.Iron
156-170
Brinnel
250
150-190
inches/mm
Frame S
Frame A/LD17/Vortex
Frame M
1.5753/1.5749 (40.013/40.002)
1.9690/1.9686 (50.013/50.002)
2.7565/2.7560 (70.015/70.002)
1.501/1.499 (38.125/38.075)
1.876/1.874 (47.650/47.600)
2.624/2.623 (66.650/66.624)
1.502/1.498 (38.151/38.049)
Coupling End
.874/.873 (22.200/22.174)
1.3750/1.3745 (34.092/34.912)
2.3745/2.3735 (60.312/60.287)
Impeller thread
.750-10UNC-2A
1.500-8UN
Snug-metal to metal
Snug-metal to metal
Snug-metal to metal
Allowable runout
.001T.I.R. (0.025)
.001T.I.R. (0.025)
.001T.I.R. (0.025)
3.5444/3.5434 (90.028/90.002)
4.3321/4.3307 (110.035/110)
5.9065/5.9055 (150.025/150)
4.1885/4.1875 (106.388/106.363)
5.126/5.125 (130.200/130.175)
7.251/7.250 (184.175/184.150)
Bore
3.5444/3.5434 (90.028/90.002)
4.3321/4.3307 (110.035/110)
5.9060/5.9044 (150.012/149.972)
Outside diameter
4.1870/4.1860 (106.350/106.324)
5.1245/5.1235 (130.162/130.137)
7.2494/7.2487 (184.135/184.117)
Thrust
5308 AHC3
Radial
(1) 6308 C3
(1) 6310 C3
(1) 6314 C3
3308 DNRCBM
NA
NA
Shaft Diameters
Bearing Housing
Cartridge
Bearings
Thrust Option
O -Rings
Thrust bearing cartridge o-ring
2-155 buna
2-248 buna
2-262 Viton
NA
2-265 buna
NA
2-024 Viton
2-029 Viton
Impeller
2-024 Teflon
2-027 Teflon
2-034 Teflon
NA
NA
2-161 Viton
System One
Pump Dimensions for
Mechanical Seal installation
inches/mm
Frame
Size
Shaft
Size
Seal
Chamber
Arrangement
First
Obstruction
Distance
Available
Inboard
Length
Seal
Chamber
Bore
Mounting
Bolt
Circle
SD
38 mm
56 mm
53 mm
58 mm
95 mm
2.38 (60)
2.21(56)
2.38 (60)
3.50 (89)
1.50
2,38 (60)
2.12 (54)
2.30 (58)
3.50 (89)
3.00 (76)
2.88 (73)
2.69 (68)
4.75 (121)
Seal Chamber
2.19 (55)
2.62 (66)
2.69 (68)
4.88 (124)
2.81 (71)
2.19 (55)
2.69 (68)
4.88 (124)
2.19 (55)
2.00 (51)
2.69 (68)
4.62 (117)
2.19 (55)
1.88 (48)
2.75 (70)
4.62 (117)
Seal Chamber
3.09 (78)
3.35 (85)
4.31 (109)
7.25 (184)
3.79 (96)
2.65 (67)
4.31 (109)
7.25 (184)
Seal Chamber
3.13 (79)
2.56 (65)
3.62 (92)
5.75 (146)
Taper Bore
3.13 (79)
3.56 (90)
3.62 (92)
5.75 (146)
1.88
3.25
2.625
PRESSURE - BARS
400
650
TEMPERATURE F
-70
-20
30
130
80
180
230
600
40
38
36
500
34
32
30
28
26
400
24
300
22
20
200
18
16
14
12
10
8
6
4
2
100
0
-100
100
200
300
400
500
System One
Metric/English and
English/Metric
Conversion Chart
Head/Pressure
To Convert From
Kilopascals
(kPa)
bars
Head/Pressure
To
Multiply By
To
Multiply By
feet of H2O
0.3352
feet of H2O
32.87
feet of fluid
0.3352/SG
feet of fluid
32.87/SG
meters of H2O
0.1022
meters of H2O
10.018
meters of fluid
0.1022/SG
meters of fluid
10.018/SG
psi
0.14504
psi
14.223
kg/cm
0.010197
kPa
98.068
pascals (Pa)
1000
bars
.9807
To Convert From
kg/cm2
bars
0.01
atmospheres
.9679
Mps
feet of H2O
2.307
atmospheres
0.009869
inch of mercury
2.036
feet of H2O
33.52
kilograms/sq. cm
.0703
kilopascals
6.895
feet of fluid
33.52/SG
meters of H2O
10.22
meters of fluid
10.22/SG
psi
14.504
2
kg/cm
1.0197
kilopascals (kPa)
100
atmospheres
0.9869
feet of H2O
33.956
feet of fluid
33.956/SG
atmospheres
meters of H2O
10.35
(standard)
meters of fluid
10.35/SG
psi
14.696
2
kg/cm
1.0332
bars
1.01325
kilopascals (kPa)
101.325
pounds/sq. inch
System One
Metric/English and
English/Metric
Conversion Chart
Capacity
Length
To Convert From
m /hr.
To
Multiply By
To Convert From
To
Multiply By
U.S. gpm
4.4033
Meters
feet
3.281
L/s
0.27778
Meters
inches
39.37
ft /s
0.00981
Feet
meters
0.3048
m /hr
101.9
Inches
meters
0.025
U.S. GPM
448.8
Inches
centimeters
2.54
L/s
28.32
Inches
millimeters
25.4
U.S. gallons/min.
cubic meters/hour
0.227
Kilometers
miles
0.6214
Imp. gallons/min.
cubic meters/hour
U.S. gallons/min.
0.2725
1.2
Kilometers
feet
3281
Liters/sec.
U.S. gallons/min.
cubic meters/hour
15.852
3.6
Barrels/Day
U.S. gallons
0.0292
ft3/s.
Specific Speed
.5
(GPM)0.5
N
Nss == RPM
RPM xx (GPM)
0.75
.75
HH
Weights
To Convert From
To
Multiply By
pounds
8.312
Feet3 of water
pounds
62.4
Meters of water
kilograms
1000
Liters of water
kilograms
Kilograms
pounds
2.205
.5
NNsss = RPM x (GPM)0.5
.75 0.75
NPSHR
H
Power
To Convert From
To
Multiply By
Horsepower
Kilowatts
0.7457
Kilowatts
Horsepower
1.34
To Convert From
To
Multiply By
180/100 (+32)
100/180 (-32)
Temperature
PSI
Ns = RPM x (GPM)
Head .5(ft) x S.G.
.75
H
2.31
BHP =
BHP =
System One
NEMA Motor Dimensions
Foot Mounted
Dimensions, tolerances and mounting
U
O
D
H Size Hole
Motor
H. P. (Enclosed)
Frames 900 1200 1800 3600
143T
1/2
3/4
1
1 1/2
145T 3/4
1 1 1/2-2 2
182T
1
1 1/2
3
3
184T 1 1/2
2
5
5
213T
2
3
7 1/2 7 1/2
215T
3
5
10
10
254T
5
7 1/2 15
15
256T 7 1/2 10
20
20
284T
10
15
25
284TS
25
286T
15
20
30
286TS
30
324T
20
25
40
324TS
40
326T
25
30
326TS
50
364T
30
40
364TS
60
60
365T
40
50
365TS
75
75
404T
50
60
404TS
405T
60
75
75
100
100
125
100
100
125
125
150
150
AC
E
A
405TS
444T
444TS
445T
445TS
447T
447TS
A Max.
7
7
9
9
10 1/2
10 1/2
12 1/2
12 1/2
14
14
14
14
16
16
16
16
18
18
18
18
20
20
20
20
22
22
22
22
22
22
B Max.
6
6
6 1/2
7 1/2
7 1/2
9
10 3/4
12 1/2
12 1/2
12 1/2
14
14
14
14
15 1/2
15 1/4
15 1/4
15 1/4
16 1/4
16 1/4
16 1/4
16 1/4
17 3/4
C Approx.
Open Encl.
12 12 1/2
12 1/2 13 1/2
13 14 1/2
14 15 1/2
16
18
17 1/2 19 1/2
20 1/2 22 1/2
22 1/2 24
23 1/2 25 1/2
22 24 1/2
25
27
23 1/2 26
26 28 1/2
24 1/2 27
27 1/2 30
26 28 1/2
29
33
27
31
30
34
28
32
32 1/2 37
29 1/2 34
34 38 1/2
17 3/4 31
18 1/2
38
18 1/2
34
20 1/2 40
20 1/2 36
23 1/4 43 1/2
23 1/4 40 1/2
35 1/2
42 1/2
38 1/2
44 1/2
41
48
46 1/2
D
3 1/2
3 1/2
4 1/2
4 1/2
5 1/4
5 1/4
6 1/4
6 1/4
7
7
7
7
8
8
8
8
9
9
9
9
10
10
10
E
2 3/4
2 3/4
3 3/4
3 3/4
4 1/4
4 1/4
5
5
5 1/2
5 1/2
5 1/2
5 1/2
6 1/4
6 1/4
6 1/4
6 1/4
7
7
7
7
8
8
8
F
2
2 1/2
2 1/4
2 3/4
2 3/4
3 1/2
4 1/8
5
4 3/4
4 3/4
5 1/2
5 1/2
5 1/4
5 1/4
6
6
5 5/8
5 5/8
6 1/8
6 1/8
6 1/8
6 1/8
6 7/8
H
11/32
11/32
13/32
13/32
13/32
13/32
17/32
17/32
17/32
17/32
17/32
17/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
13/16
13/16
13/16
C
Approx.
7
7
9 1/4
9 1/4
10 7/8
10 7/8
12 3/4
12 3/4
14 3/8
14 3/8
14 3/8
14 1/2
16 5/8
16 5/8
16 5/8
16 5/8
18 1/2
18 1/2
18 1/2
18 1/2
20 5/8
20 5/8
20 5/8
U
7/8
7/8
1 1/8
1 1/8
1 3/8
1 3/8
1 5/8
1 5/8
1 7/8
1 5/8
1 7/8
1 5/8
2 1/8
1 7/8
2 1/8
1 7/8
18 1/2
18 1/2
18 1/2
18 1/2
2 7/8
2 1/8
2 7/8
Keyway
3/16 x 3/32
3/16 x 3/32
1/4 x 1/8
1/4 x 1/8
5/16 x 5/32
5/16 x 5/32
3/8 x 3/16
3/8 x 3/16
1/2 x 1/4
3/8 x 3/16
1/2 x 1/4
1/2 x 1/4
1/2 x 1/4
1/2 x 1/4
5/8 x 5/16
1/2 x 1/4
5/8 x 5/16
1/2 x 1/4
5/8 x 5/16
1/2 x 1/4
3/4 x 3/8
1/2 x 1/4
3/4 x 3/8
V Min.
2
2
2 1/2
2 1/2
3 1/8
3 1/8
3 3/4
3 3/4
4 3/8
3
4 3/8
3
5
3 1/2
6
3 1/2
5 5/8
3 1/2
5 5/8
3 1/2
7
4
7
AC
4 1/2
4 1/2
5 1/2
5 1/2
6 7/8
6 7/8
8 1/4
8 1/4
9 3/8
8
9 3/8
8
10 1/2
9
10 1/2
9
11 3/4
9 5/8
11 3/4
9 5/8
13 7/8
10 7/8
13 7/8
Wt. App.
Lbs.
45
50
79
95
140
160
235
270
370
340
405
395
520
500
580
560
755
740
835
820
1050
1050
1160
10
11
11
11
11
11
11
8
9
9
9
9
9
9
6 7/8
7 1/4
7 1/4
8 1/4
8 1/4
10
10
13/16
13/16
13/16
13/16
13/16
13/16
13/16
20 5/8
23 1/8
23 1/8
23 1/8
23 1/8
23 1/8
23 1/8
2 1/8
3 3/8
2 3/8
3 3/8
2 3/8
3 3/8
2 3/8
1/2 x 1/4
7/8 x 7/16
5/8 x 5/16
7/8 x 7/16
5/8 x 5/16
7/8 x 7/16
5/8 x 5/16
4
8 1/4
4 1/2
8 1/4
4 1/2
8 1/4
4 1/2
10 7/8
16
12 1/4
16
12 1/4
16
12 1/4
1150
1440
1440
1650
1615
2260
2260
10
System One
NEMA C-Face Motor
with Feet Dimensions
Cast Iron Construction
Enclosure: Totally Enclosed, Fan Cooled
FRAMES 180TC thru 210TC
BB
Min.
BF Tap 4 Holes
45
AH
BD
AK
U
NW
BA
2F
B
Motor
Frames
180TC
210TC
A
9.00
10.50
Motor
Frames
182T
184T
213T
215T
C
16.38
16.38
20.00
20.00
E
Dimensions are in inches
D
4.50
5.25
B
7.00
7.00
8.50
8.50
E
3.75
4.25
2F
4.50
5.50
5.50
7.00
H
0.44
0.44
O
9.88
11.25
AH
2.62
2.62
3.12
3.12
BA
3.50
4.25
N-W
2.75
2.75
3.38
3.38
11
E
H Dia.
BB
0.25
0.25
BD
9.00
9.00
BF
1/2 - 13
1/2 - 13
LGTH.
1.75
1.75
2.38
2.38
AK
8.50
8.50
Weight
Lbs.
88
93
140
150
System One
NEMA C-Face motor
with Feet Dimensions
Cast Iron Construction
Enclosure: Totally Enclosed, Fan Cooled
FRAMES 250TC thru 440TC
P
C
BB
Min.
BF Tap 4 Holes
T
45
AH
O
BD
AK
U
N W
BA
2F
E
Dimensions are in inches
Motor
Frames
254TC-256TC
284TC -285TCS
324TC-326TS
364TC-365TSC
404TC-405TSC
444TC-445TSC
A
12.50
13.75
15.50
17.00
19.00
21.00
Motor
Frames
254TC
256TC
284TC
284TSC
286TC
286TSC
324TC
324TSC
326TC
326TSC
364TC
364TSC
365TC
365TSC
404TC
404TSC
405TC
405TSC
444TC
444TSC
445TC
445TSC
C
25.06
25.06
27.44
26.06
27.44
26.06
30.44
28.94
30.44
28.94
33.44
31.21
33.44
31.31
38.31
35.31
38.31
35.31
44.62
40.88
44.62
40.88
D
6.25
7.00
8.00
9.00
10.00
11.00
B
12.00
12.00
13.00
13.00
13.00
13.00
14.75
14.75
14.75
14.75
15.00
15.00
15.00
15.00
16.00
16.00
16.00
16.00
19.00
19.00
19.00
19.00
E
5.00
5.50
6.25
7.00
8.00
9.00
H
0.56
0.56
0.69
0.69
0.81
0.81
2F
10.00
11.00
11.00
12.00
12.00
12.25
12.25
13.75
13.75
16.50
16.50
O
13.25
14.75
16.69
18.50
21.31
23.38
AH
3.75
3.75
4.38
3.00
4.38
3.00
5.00
3.50
5.00
3.50
5.62
3.50
5.62
3.50
7.00
4.00
7.00
4.00
8.25
4.50
8.25
4.50
12
H Dia.
BA
4.75
4.75
5.25
5.88
6.62
7.50
N-W
4.00
4.00
4.62
3.25
4.62
3.25
5.25
3.75
5.25
3.75
5.88
3.75
5.88
3.75
7.25
4.25
7.25
4.25
8.50
4.75
8.50
4.75
BB
0.25
0.25
0.25
0.25
0.25
0.25
BD
9.00
11.25
13.12
13.00
13.12
16.75
BF
1/2 - 13
1/2 - 13
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
LGTH.
2.88
2.88
3,25
1.88
3.25
1.88
3.99
2.00
3.88
2.00
4.25
2.00
4.25
2.00
5.62
2.75
5.62
2.75
6.88
3.00
6.88
3.00
AK
8.50
10.50
12.50
12.50
12.50
16.00
Weight
Lbs.
3.15
3.25
4.45
4.60
4.60
5.55
5.55
5.95
5.95
5.95
8.15
8.09
8.55
8.49
11.65
11.56
12.05
11.96
16.08
15.92
17.98
17.82
Centrifugal Pump
Specification
for Horizontal
End Suction Pumps
Table of Contents
1.0
SCOPE
2.0
3.0
PUMP SPECIFICATION
4.0
PAINT SPECIFICATION
5.0
QUOTATION REQUIREMENTS
6.0
DOCUMENTATION
REQUIREMENTS
7.0
VENDOR REQUIREMENTS
1.0
SCOPE
2.2.3
The pump shall be permanently tagged with a
300 series stainless steel nameplate. Nameplate
information shall include pump size, gpm, TDH,
speed, material of construction, rated impeller
diameter and serial number. An arrow shall
appear on the pump clearly showing the
direction of rotation.
2.0
PUMP SELECTION
2.2.4
Casing discharge shall be centerline discharge
unless otherwise specified. Side discharge to be
an available option.
2.1.1
The pumps for this project shall be selected to
allow maximum interchangeability of parts
without limiting pump performance. The rotating
assembly/power end for each pump shall be
interchangeable with all the pump wet ends
selected, unless otherwise designated.
2.2.5
Pump shall be selected based on minimizing life
cycle costs and emissions, not on minimizing
initial purchase costs. Proposed selection will be
based on rotor dynamics evaluation, hydraulic
performance and effective window of operation.
Debits/credits will be used to evaluate vendor
proposals.
2.1.2
The pumps shall operate in accordance with the
hydraulic performance requirements.
2.1.3
The pump shall operate smoothly throughout
the entire design operating flow range or rpm
range with low vibrations. Acceptable vibration
limits shall be as specified in Hydraulic Institute
Standards for Centrifugal Pumps.
2.2.6
The pump casing shall incorporate centerline
support feet for design operating temperatures
above 250F (120C).
3.0
2.1.4
The pump impeller shall provide the design head
and flow rate as designated by the purchaser.
The impeller diameter selected to meet design
conditions shall not be smaller than the minimum
as shown in the manufacturers published
performance curves.
PUMP SPECIFICATION
2.1.5
The pumps defined herein are for
general/industrial/chemical process service.
They shall be designed for continuous duty, with
extended performance life and low maintenance
and operations costs.
2.1.6
The pump shall be a back pull-out design with a
radially split casing.
2.1.7
The noise level generated by the pump and motor
shall not exceed 85 dB, or motor noise level plus
3 dB, when measured at a distance of 3 feet.
2.2.0
The pump suction and discharge flange
arrangement shall conform to ANSI B73.1
(or DIN 16 bar standard where applicable).
2.2.1
Castings shall be sound and free of shrink holes,
blow holes, scale, blisters and other obvious defects.
2.2.2
Pressure containing castings shall not be repaired
by plugging, peening, burring in or impregnating.
2
3.1.2 IMPELLER
The impeller shall be open type, cast in CD4MCU
or material as required by the application.
Repelling vanes shall be cast on the back side of
the impeller, to reduce the pressure behind the
impeller in the immediate area of the mechanical
seal and/or packing chamber.
The impeller hubs shall incorporate a threaded fit
to the pump shaft. The impeller threads shall be
sealed from corrosive environment by a Teflon
O ring in the hub.
Open impellers are preferred.
The impeller shall be balanced to ISO specification
G.6.3 or better unless otherwise specified.
Balancing must be performed in a minimum of
two planes. Balancing shall, unless detrimental
to the component or its performance, be attained
by the removal of material.
3.1.3 SHAFT
The pump shaft shall be constructed of solid
316SS, 17-4PH, or as required by the application.
Bimetallic shafts are acceptable. Shaft sleeves
are not acceptable. The pump shaft shall be
mechanically non-contacting throughout the
entire rotating element, with the exception of the
ball bearings, to prevent wear at the bearing oil
seal and mechanical seal. The stiffness ratios
(L3/D4), where L= length of shaft from impeller
centerline to nearest bearing in inches and
D= shaft diameter under the seal in inches, shall
not exceed the following values in order to
establish satisfactory mechanical seal life.
Shaft size at seal
Shafts 1.5"
Shafts >1.5", 2.0"
Shafts >1.5", 2.0" 1
Shafts > 2"
1special
L3/D4
46 (1.9)
20 (0.8)
551 (2.1)
19 (0.7)
requirements
4.0
6.0
5.0
DOCUMENTATION REQUIREMENTS
Within ten (10) working days after the purchase
order is received the vendor will supply the
following:
A) Dimensional Prints
( ) Copy
B) Parts List
( ) Copy
C) Operation and Installation
Manual
( ) Copy
D) Certified Performance Curve ( ) Copy
E) Mechanical Seal Drawing
( ) Copy
Surface preparation:
Parts are cleaned in an industrial washer with
appropriate cleaner.
All parts are then rinsed in a rinse tank.
Paint:
One coat of Rustoleum High Performance Epoxy
9100 Series SystemYellow #A91- 4412 base with
A5275 activator or equivalent epoxy coat system.
This product is a two component, high build,
polyamide / aminemodified low VOC epoxy
coating.
Total Paint Thickness:
Dry film thickness range of epoxy coating shall
be .005" to .008" (0.12- 0.20 mm).
Total Paint Thickness:
Dry film thickness range of epoxy coating shall
be .005" to .008".
7.0
VENDOR REQUIREMENTS
The vendor shall have the capability of flying
spare parts to any location within a 24 hour
period. All applicable spare parts must be
available from the plant within this time period.
Service capabilities will include start-up,
troubleshooting and personnel training by a
vendor authorized representative.
QUOTATION REQUIREMENTS
5.1.1
Quotation shall be completed in strict accordance
with the requisition requirement.
5.1.2
Vendor shall state all exceptions to this
specification in the bid package. All deviations
and/or exceptions from this specification must
be outlined in full detail and the reasons for
these exceptions fully explained.
5.1.3
Unless the vendors proposal takes exception as
outlined in the section above (5.1.2) conformance
is implied and assumed. Alternates and
exceptions shall be clearly defined and described
in the vendors proposal.
5.1.4
Alternates may be submitted with the bid.
They shall be clearly described and defined in
the vendors proposal.
5.1.5
The proposal shall include a Pump Performance
Curve showing gpm, TDH, NPSHR, Efficiency, Power
requirements @ design and runout, and design
and maximum/minimum impeller. Also included
shall be shaft stiffness ratios and descriptive
literature for the pump and the mechanical seal.
5.1.6
The quotation shall include a complete list of
recommended spare parts with price and delivery
information.