Beruflich Dokumente
Kultur Dokumente
Software Release
Hardware Features
Software Features
Cables and Connectors
LEDs
Alarms, Errors, and Events
SoftwareRelease
1port: Junos OS Release 12.1R2 and later (Type 3)
4port: Junos OS Release 12.1 and later (Type 4)
For information on which FPCs support this PIC, see T4000 PIC/FPC Compatibility.
HardwareFeatures
One or four OC192 ports
Note: Four OC192 links can be aggregated into one OC768 link or two OC256 links.
The four fiber links should be on the same fiber path or the same fiber.
Power requirement:
1port (Type 3): 0.52 A @ 48 V (25 W)
4port (Type 4): 1.11 A @ 48 V (53.1 W)
Model number for 1port SONET/SDH OC192/STM64 PIC: PC1OC192SONXFP
Model number for 4port SONET/SDH OC192/STM64 PIC: PD4OC192SONXFP
Multiplexing and demultiplexing
Rate policing on input
SoftwareFeatures
Table 1: Software Features Supported
12.1R2
12.1R1
SONET/SDH framing
12.1R2
12.1R1
12.1R2
12.1R1
12.1R2
12.1R1
12.1R2
12.1R1
12.1R2
12.1R1
Encapsulations:
12.1R2
12.1R1
Software Feature
CablesandConnectors
Duplex LC connector (Rx and Tx)
SONET/SDH OC192c/STM64 XFP transceivers:
Short reach (SR1) (model number: XFP10GLOC192SR1)
Intermediate reach (IR1) (model number: XFP10GEOC192IR2)
Long reach (LR1) (model number: XFP10GZOC192LR2)
Note: To extend the life of the laser, when a PIC is not being actively used with any
valid links, take the PIC offline until you are ready to establish a link to another device.
For information about taking a PIC offline, see the requestchassispicoffline
command in request chassis pic.
LEDs
Table 2: 1Port SONET/SDH OC192/STM64 PIC LEDs
Label
Color
State
Description
LINKSTATUSLED
Off
Port is down.
Green
On steadily
Label
Color
State
Description
Off
Not enabled.
Green
On
steadily
Yellow
On
steadily
Red
On
steadily
Off
Not enabled.
Green
On
steadily
Yellow
On
steadily
Red
On
steadily
Alarms,Errors,andEvents
SONET alarms:
Alarm indication signalline (AISL)
Alarm indication signalpath (AISP)
Bit error ratesignal degrade (BERRSD)
Published: 20141015